summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/kernel/entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/xtensa/kernel/entry.S')
-rw-r--r--arch/xtensa/kernel/entry.S2264
1 files changed, 2264 insertions, 0 deletions
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
new file mode 100644
index 000000000..272fff587
--- /dev/null
+++ b/arch/xtensa/kernel/entry.S
@@ -0,0 +1,2264 @@
+/*
+ * Low-level exception handling
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 - 2008 by Tensilica Inc.
+ * Copyright (C) 2015 Cadence Design Systems Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ *
+ */
+
+#include <linux/linkage.h>
+#include <linux/pgtable.h>
+#include <asm/asm-offsets.h>
+#include <asm/asmmacro.h>
+#include <asm/processor.h>
+#include <asm/coprocessor.h>
+#include <asm/thread_info.h>
+#include <asm/asm-uaccess.h>
+#include <asm/unistd.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+#include <asm/page.h>
+#include <asm/signal.h>
+#include <asm/tlbflush.h>
+#include <variant/tie-asm.h>
+
+/*
+ * Macro to find first bit set in WINDOWBASE from the left + 1
+ *
+ * 100....0 -> 1
+ * 010....0 -> 2
+ * 000....1 -> WSBITS
+ */
+
+ .macro ffs_ws bit mask
+
+#if XCHAL_HAVE_NSA
+ nsau \bit, \mask # 32-WSBITS ... 31 (32 iff 0)
+ addi \bit, \bit, WSBITS - 32 + 1 # uppest bit set -> return 1
+#else
+ movi \bit, WSBITS
+#if WSBITS > 16
+ _bltui \mask, 0x10000, 99f
+ addi \bit, \bit, -16
+ extui \mask, \mask, 16, 16
+#endif
+#if WSBITS > 8
+99: _bltui \mask, 0x100, 99f
+ addi \bit, \bit, -8
+ srli \mask, \mask, 8
+#endif
+99: _bltui \mask, 0x10, 99f
+ addi \bit, \bit, -4
+ srli \mask, \mask, 4
+99: _bltui \mask, 0x4, 99f
+ addi \bit, \bit, -2
+ srli \mask, \mask, 2
+99: _bltui \mask, 0x2, 99f
+ addi \bit, \bit, -1
+99:
+
+#endif
+ .endm
+
+
+ .macro irq_save flags tmp
+#if XTENSA_FAKE_NMI
+#if defined(CONFIG_DEBUG_KERNEL) && (LOCKLEVEL | TOPLEVEL) >= XCHAL_DEBUGLEVEL
+ rsr \flags, ps
+ extui \tmp, \flags, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ bgei \tmp, LOCKLEVEL, 99f
+ rsil \tmp, LOCKLEVEL
+99:
+#else
+ movi \tmp, LOCKLEVEL
+ rsr \flags, ps
+ or \flags, \flags, \tmp
+ xsr \flags, ps
+ rsync
+#endif
+#else
+ rsil \flags, LOCKLEVEL
+#endif
+ .endm
+
+/* ----------------- DEFAULT FIRST LEVEL EXCEPTION HANDLERS ----------------- */
+
+/*
+ * First-level exception handler for user exceptions.
+ * Save some special registers, extra states and all registers in the AR
+ * register file that were in use in the user task, and jump to the common
+ * exception code.
+ * We save SAR (used to calculate WMASK), and WB and WS (we don't have to
+ * save them for kernel exceptions).
+ *
+ * Entry condition for user_exception:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original value in depc
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Entry condition for _user_exception:
+ *
+ * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
+ * excsave has been restored, and
+ * stack pointer (a1) has been set.
+ *
+ * Note: _user_exception might be at an odd address. Don't use call0..call12
+ */
+ .literal_position
+
+ENTRY(user_exception)
+
+ /* Save a1, a2, a3, and set SP. */
+
+ rsr a0, depc
+ s32i a1, a2, PT_AREG1
+ s32i a0, a2, PT_AREG2
+ s32i a3, a2, PT_AREG3
+ mov a1, a2
+
+ .globl _user_exception
+_user_exception:
+
+ /* Save SAR and turn off single stepping */
+
+ movi a2, 0
+ wsr a2, depc # terminate user stack trace with 0
+ rsr a3, sar
+ xsr a2, icountlevel
+ s32i a3, a1, PT_SAR
+ s32i a2, a1, PT_ICOUNTLEVEL
+
+#if XCHAL_HAVE_THREADPTR
+ rur a2, threadptr
+ s32i a2, a1, PT_THREADPTR
+#endif
+
+ /* Rotate ws so that the current windowbase is at bit0. */
+ /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
+
+#if defined(USER_SUPPORT_WINDOWED)
+ rsr a2, windowbase
+ rsr a3, windowstart
+ ssr a2
+ s32i a2, a1, PT_WINDOWBASE
+ s32i a3, a1, PT_WINDOWSTART
+ slli a2, a3, 32-WSBITS
+ src a2, a3, a2
+ srli a2, a2, 32-WSBITS
+ s32i a2, a1, PT_WMASK # needed for restoring registers
+#else
+ movi a2, 0
+ movi a3, 1
+ s32i a2, a1, PT_WINDOWBASE
+ s32i a3, a1, PT_WINDOWSTART
+ s32i a3, a1, PT_WMASK
+#endif
+
+ /* Save only live registers. */
+
+UABI_W _bbsi.l a2, 1, .Lsave_window_registers
+ s32i a4, a1, PT_AREG4
+ s32i a5, a1, PT_AREG5
+ s32i a6, a1, PT_AREG6
+ s32i a7, a1, PT_AREG7
+UABI_W _bbsi.l a2, 2, .Lsave_window_registers
+ s32i a8, a1, PT_AREG8
+ s32i a9, a1, PT_AREG9
+ s32i a10, a1, PT_AREG10
+ s32i a11, a1, PT_AREG11
+UABI_W _bbsi.l a2, 3, .Lsave_window_registers
+ s32i a12, a1, PT_AREG12
+ s32i a13, a1, PT_AREG13
+ s32i a14, a1, PT_AREG14
+ s32i a15, a1, PT_AREG15
+
+#if defined(USER_SUPPORT_WINDOWED)
+ /* If only one valid frame skip saving regs. */
+
+ beqi a2, 1, common_exception
+
+ /* Save the remaining registers.
+ * We have to save all registers up to the first '1' from
+ * the right, except the current frame (bit 0).
+ * Assume a2 is: 001001000110001
+ * All register frames starting from the top field to the marked '1'
+ * must be saved.
+ */
+.Lsave_window_registers:
+ addi a3, a2, -1 # eliminate '1' in bit 0: yyyyxxww0
+ neg a3, a3 # yyyyxxww0 -> YYYYXXWW1+1
+ and a3, a3, a2 # max. only one bit is set
+
+ /* Find number of frames to save */
+
+ ffs_ws a0, a3 # number of frames to the '1' from left
+
+ /* Store information into WMASK:
+ * bits 0..3: xxx1 masked lower 4 bits of the rotated windowstart,
+ * bits 4...: number of valid 4-register frames
+ */
+
+ slli a3, a0, 4 # number of frames to save in bits 8..4
+ extui a2, a2, 0, 4 # mask for the first 16 registers
+ or a2, a3, a2
+ s32i a2, a1, PT_WMASK # needed when we restore the reg-file
+
+ /* Save 4 registers at a time */
+
+1: rotw -1
+ s32i a0, a5, PT_AREG_END - 16
+ s32i a1, a5, PT_AREG_END - 12
+ s32i a2, a5, PT_AREG_END - 8
+ s32i a3, a5, PT_AREG_END - 4
+ addi a0, a4, -1
+ addi a1, a5, -16
+ _bnez a0, 1b
+
+ /* WINDOWBASE still in SAR! */
+
+ rsr a2, sar # original WINDOWBASE
+ movi a3, 1
+ ssl a2
+ sll a3, a3
+ wsr a3, windowstart # set corresponding WINDOWSTART bit
+ wsr a2, windowbase # and WINDOWSTART
+ rsync
+
+ /* We are back to the original stack pointer (a1) */
+#endif
+ /* Now, jump to the common exception handler. */
+
+ j common_exception
+
+ENDPROC(user_exception)
+
+/*
+ * First-level exit handler for kernel exceptions
+ * Save special registers and the live window frame.
+ * Note: Even though we changes the stack pointer, we don't have to do a
+ * MOVSP here, as we do that when we return from the exception.
+ * (See comment in the kernel exception exit code)
+ *
+ * Entry condition for kernel_exception:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Entry condition for _kernel_exception:
+ *
+ * a0-a3 and depc have been saved to PT_AREG0...PT_AREG3 and PT_DEPC
+ * excsave has been restored, and
+ * stack pointer (a1) has been set.
+ *
+ * Note: _kernel_exception might be at an odd address. Don't use call0..call12
+ */
+
+ENTRY(kernel_exception)
+
+ /* Save a1, a2, a3, and set SP. */
+
+ rsr a0, depc # get a2
+ s32i a1, a2, PT_AREG1
+ s32i a0, a2, PT_AREG2
+ s32i a3, a2, PT_AREG3
+ mov a1, a2
+
+ .globl _kernel_exception
+_kernel_exception:
+
+ /* Save SAR and turn off single stepping */
+
+ movi a2, 0
+ rsr a3, sar
+ xsr a2, icountlevel
+ s32i a3, a1, PT_SAR
+ s32i a2, a1, PT_ICOUNTLEVEL
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ /* Rotate ws so that the current windowbase is at bit0. */
+ /* Assume ws = xxwww1yyyy. Rotate ws right, so that a2 = yyyyxxwww1 */
+
+ rsr a2, windowbase # don't need to save these, we only
+ rsr a3, windowstart # need shifted windowstart: windowmask
+ ssr a2
+ slli a2, a3, 32-WSBITS
+ src a2, a3, a2
+ srli a2, a2, 32-WSBITS
+ s32i a2, a1, PT_WMASK # needed for kernel_exception_exit
+#endif
+
+ /* Save only the live window-frame */
+
+KABI_W _bbsi.l a2, 1, 1f
+ s32i a4, a1, PT_AREG4
+ s32i a5, a1, PT_AREG5
+ s32i a6, a1, PT_AREG6
+ s32i a7, a1, PT_AREG7
+KABI_W _bbsi.l a2, 2, 1f
+ s32i a8, a1, PT_AREG8
+ s32i a9, a1, PT_AREG9
+ s32i a10, a1, PT_AREG10
+ s32i a11, a1, PT_AREG11
+KABI_W _bbsi.l a2, 3, 1f
+ s32i a12, a1, PT_AREG12
+ s32i a13, a1, PT_AREG13
+ s32i a14, a1, PT_AREG14
+ s32i a15, a1, PT_AREG15
+
+#ifdef __XTENSA_WINDOWED_ABI__
+ _bnei a2, 1, 1f
+ /* Copy spill slots of a0 and a1 to imitate movsp
+ * in order to keep exception stack continuous
+ */
+ l32i a3, a1, PT_KERNEL_SIZE
+ l32i a0, a1, PT_KERNEL_SIZE + 4
+ s32e a3, a1, -16
+ s32e a0, a1, -12
+#endif
+1:
+ l32i a0, a1, PT_AREG0 # restore saved a0
+ wsr a0, depc
+
+/*
+ * This is the common exception handler.
+ * We get here from the user exception handler or simply by falling through
+ * from the kernel exception handler.
+ * Save the remaining special registers, switch to kernel mode, and jump
+ * to the second-level exception handler.
+ *
+ */
+
+common_exception:
+
+ /* Save some registers, disable loops and clear the syscall flag. */
+
+ rsr a2, debugcause
+ rsr a3, epc1
+ s32i a2, a1, PT_DEBUGCAUSE
+ s32i a3, a1, PT_PC
+
+ movi a2, NO_SYSCALL
+ rsr a3, excvaddr
+ s32i a2, a1, PT_SYSCALL
+ movi a2, 0
+ s32i a3, a1, PT_EXCVADDR
+#if XCHAL_HAVE_LOOPS
+ xsr a2, lcount
+ s32i a2, a1, PT_LCOUNT
+#endif
+
+#if XCHAL_HAVE_EXCLUSIVE
+ /* Clear exclusive access monitor set by interrupted code */
+ clrex
+#endif
+
+ /* It is now save to restore the EXC_TABLE_FIXUP variable. */
+
+ rsr a2, exccause
+ movi a3, 0
+ rsr a0, excsave1
+ s32i a2, a1, PT_EXCCAUSE
+ s32i a3, a0, EXC_TABLE_FIXUP
+
+ /* All unrecoverable states are saved on stack, now, and a1 is valid.
+ * Now we can allow exceptions again. In case we've got an interrupt
+ * PS.INTLEVEL is set to LOCKLEVEL disabling furhter interrupts,
+ * otherwise it's left unchanged.
+ *
+ * Set PS(EXCM = 0, UM = 0, RING = 0, OWB = 0, WOE = 1, INTLEVEL = X)
+ */
+
+ rsr a3, ps
+ s32i a3, a1, PT_PS # save ps
+
+#if XTENSA_FAKE_NMI
+ /* Correct PS needs to be saved in the PT_PS:
+ * - in case of exception or level-1 interrupt it's in the PS,
+ * and is already saved.
+ * - in case of medium level interrupt it's in the excsave2.
+ */
+ movi a0, EXCCAUSE_MAPPED_NMI
+ extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ beq a2, a0, .Lmedium_level_irq
+ bnei a2, EXCCAUSE_LEVEL1_INTERRUPT, .Lexception
+ beqz a3, .Llevel1_irq # level-1 IRQ sets ps.intlevel to 0
+
+.Lmedium_level_irq:
+ rsr a0, excsave2
+ s32i a0, a1, PT_PS # save medium-level interrupt ps
+ bgei a3, LOCKLEVEL, .Lexception
+
+.Llevel1_irq:
+ movi a3, LOCKLEVEL
+
+.Lexception:
+KABI_W movi a0, PS_WOE_MASK
+KABI_W or a3, a3, a0
+#else
+ addi a2, a2, -EXCCAUSE_LEVEL1_INTERRUPT
+ movi a0, LOCKLEVEL
+ extui a3, a3, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ # a3 = PS.INTLEVEL
+ moveqz a3, a0, a2 # a3 = LOCKLEVEL iff interrupt
+KABI_W movi a2, PS_WOE_MASK
+KABI_W or a3, a3, a2
+#endif
+
+ /* restore return address (or 0 if return to userspace) */
+ rsr a0, depc
+ wsr a3, ps
+ rsync # PS.WOE => rsync => overflow
+
+ /* Save lbeg, lend */
+#if XCHAL_HAVE_LOOPS
+ rsr a4, lbeg
+ rsr a3, lend
+ s32i a4, a1, PT_LBEG
+ s32i a3, a1, PT_LEND
+#endif
+
+ /* Save SCOMPARE1 */
+
+#if XCHAL_HAVE_S32C1I
+ rsr a3, scompare1
+ s32i a3, a1, PT_SCOMPARE1
+#endif
+
+ /* Save optional registers. */
+
+ save_xtregs_opt a1 a3 a4 a5 a6 a7 PT_XTREGS_OPT
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ rsr abi_tmp0, ps
+ extui abi_tmp0, abi_tmp0, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ beqz abi_tmp0, 1f
+ abi_call trace_hardirqs_off
+1:
+#endif
+#ifdef CONFIG_CONTEXT_TRACKING_USER
+ l32i abi_tmp0, a1, PT_PS
+ bbci.l abi_tmp0, PS_UM_BIT, 1f
+ abi_call user_exit_callable
+1:
+#endif
+
+ /* Go to second-level dispatcher. Set up parameters to pass to the
+ * exception handler and call the exception handler.
+ */
+
+ l32i abi_arg1, a1, PT_EXCCAUSE # pass EXCCAUSE
+ rsr abi_tmp0, excsave1
+ addx4 abi_tmp0, abi_arg1, abi_tmp0
+ l32i abi_tmp0, abi_tmp0, EXC_TABLE_DEFAULT # load handler
+ mov abi_arg0, a1 # pass stack frame
+
+ /* Call the second-level handler */
+
+ abi_callx abi_tmp0
+
+ /* Jump here for exception exit */
+ .global common_exception_return
+common_exception_return:
+
+#if XTENSA_FAKE_NMI
+ l32i abi_tmp0, a1, PT_EXCCAUSE
+ movi abi_tmp1, EXCCAUSE_MAPPED_NMI
+ l32i abi_saved1, a1, PT_PS
+ beq abi_tmp0, abi_tmp1, .Lrestore_state
+#endif
+.Ltif_loop:
+ irq_save abi_tmp0, abi_tmp1
+#ifdef CONFIG_TRACE_IRQFLAGS
+ abi_call trace_hardirqs_off
+#endif
+
+ /* Jump if we are returning from kernel exceptions. */
+
+ l32i abi_saved1, a1, PT_PS
+ GET_THREAD_INFO(abi_tmp0, a1)
+ l32i abi_saved0, abi_tmp0, TI_FLAGS
+ _bbci.l abi_saved1, PS_UM_BIT, .Lexit_tif_loop_kernel
+
+ /* Specific to a user exception exit:
+ * We need to check some flags for signal handling and rescheduling,
+ * and have to restore WB and WS, extra states, and all registers
+ * in the register file that were in use in the user task.
+ * Note that we don't disable interrupts here.
+ */
+
+ _bbsi.l abi_saved0, TIF_NEED_RESCHED, .Lresched
+ movi abi_tmp0, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NOTIFY_SIGNAL
+ bnone abi_saved0, abi_tmp0, .Lexit_tif_loop_user
+
+ l32i abi_tmp0, a1, PT_DEPC
+ bgeui abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state
+
+ /* Call do_signal() */
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ abi_call trace_hardirqs_on
+#endif
+ rsil abi_tmp0, 0
+ mov abi_arg0, a1
+ abi_call do_notify_resume # int do_notify_resume(struct pt_regs*)
+ j .Ltif_loop
+
+.Lresched:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ abi_call trace_hardirqs_on
+#endif
+ rsil abi_tmp0, 0
+ abi_call schedule # void schedule (void)
+ j .Ltif_loop
+
+.Lexit_tif_loop_kernel:
+#ifdef CONFIG_PREEMPTION
+ _bbci.l abi_saved0, TIF_NEED_RESCHED, .Lrestore_state
+
+ /* Check current_thread_info->preempt_count */
+
+ l32i abi_tmp1, abi_tmp0, TI_PRE_COUNT
+ bnez abi_tmp1, .Lrestore_state
+ abi_call preempt_schedule_irq
+#endif
+ j .Lrestore_state
+
+.Lexit_tif_loop_user:
+#ifdef CONFIG_CONTEXT_TRACKING_USER
+ abi_call user_enter_callable
+#endif
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ _bbci.l abi_saved0, TIF_DB_DISABLED, 1f
+ abi_call restore_dbreak
+1:
+#endif
+#ifdef CONFIG_DEBUG_TLB_SANITY
+ l32i abi_tmp0, a1, PT_DEPC
+ bgeui abi_tmp0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lrestore_state
+ abi_call check_tlb_sanity
+#endif
+
+.Lrestore_state:
+#ifdef CONFIG_TRACE_IRQFLAGS
+ extui abi_tmp0, abi_saved1, PS_INTLEVEL_SHIFT, PS_INTLEVEL_WIDTH
+ bgei abi_tmp0, LOCKLEVEL, 1f
+ abi_call trace_hardirqs_on
+1:
+#endif
+ /*
+ * Restore optional registers.
+ * abi_arg* are used as temporary registers here.
+ */
+
+ load_xtregs_opt a1 abi_tmp0 abi_arg0 abi_arg1 abi_arg2 abi_arg3 PT_XTREGS_OPT
+
+ /* Restore SCOMPARE1 */
+
+#if XCHAL_HAVE_S32C1I
+ l32i abi_tmp0, a1, PT_SCOMPARE1
+ wsr abi_tmp0, scompare1
+#endif
+ wsr abi_saved1, ps /* disable interrupts */
+ _bbci.l abi_saved1, PS_UM_BIT, kernel_exception_exit
+
+user_exception_exit:
+
+ /* Restore the state of the task and return from the exception. */
+
+#if defined(USER_SUPPORT_WINDOWED)
+ /* Switch to the user thread WINDOWBASE. Save SP temporarily in DEPC */
+
+ l32i a2, a1, PT_WINDOWBASE
+ l32i a3, a1, PT_WINDOWSTART
+ wsr a1, depc # use DEPC as temp storage
+ wsr a3, windowstart # restore WINDOWSTART
+ ssr a2 # preserve user's WB in the SAR
+ wsr a2, windowbase # switch to user's saved WB
+ rsync
+ rsr a1, depc # restore stack pointer
+ l32i a2, a1, PT_WMASK # register frames saved (in bits 4...9)
+ rotw -1 # we restore a4..a7
+ _bltui a6, 16, .Lclear_regs # only have to restore current window?
+
+ /* The working registers are a0 and a3. We are restoring to
+ * a4..a7. Be careful not to destroy what we have just restored.
+ * Note: wmask has the format YYYYM:
+ * Y: number of registers saved in groups of 4
+ * M: 4 bit mask of first 16 registers
+ */
+
+ mov a2, a6
+ mov a3, a5
+
+1: rotw -1 # a0..a3 become a4..a7
+ addi a3, a7, -4*4 # next iteration
+ addi a2, a6, -16 # decrementing Y in WMASK
+ l32i a4, a3, PT_AREG_END + 0
+ l32i a5, a3, PT_AREG_END + 4
+ l32i a6, a3, PT_AREG_END + 8
+ l32i a7, a3, PT_AREG_END + 12
+ _bgeui a2, 16, 1b
+
+ /* Clear unrestored registers (don't leak anything to user-land */
+
+.Lclear_regs:
+ rsr a0, windowbase
+ rsr a3, sar
+ sub a3, a0, a3
+ beqz a3, 2f
+ extui a3, a3, 0, WBBITS
+
+1: rotw -1
+ addi a3, a7, -1
+ movi a4, 0
+ movi a5, 0
+ movi a6, 0
+ movi a7, 0
+ bgei a3, 1, 1b
+
+ /* We are back were we were when we started.
+ * Note: a2 still contains WMASK (if we've returned to the original
+ * frame where we had loaded a2), or at least the lower 4 bits
+ * (if we have restored WSBITS-1 frames).
+ */
+2:
+#else
+ movi a2, 1
+#endif
+#if XCHAL_HAVE_THREADPTR
+ l32i a3, a1, PT_THREADPTR
+ wur a3, threadptr
+#endif
+
+ j common_exception_exit
+
+ /* This is the kernel exception exit.
+ * We avoided to do a MOVSP when we entered the exception, but we
+ * have to do it here.
+ */
+
+kernel_exception_exit:
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ /* Check if we have to do a movsp.
+ *
+ * We only have to do a movsp if the previous window-frame has
+ * been spilled to the *temporary* exception stack instead of the
+ * task's stack. This is the case if the corresponding bit in
+ * WINDOWSTART for the previous window-frame was set before
+ * (not spilled) but is zero now (spilled).
+ * If this bit is zero, all other bits except the one for the
+ * current window frame are also zero. So, we can use a simple test:
+ * 'and' WINDOWSTART and WINDOWSTART-1:
+ *
+ * (XXXXXX1[0]* - 1) AND XXXXXX1[0]* = XXXXXX0[0]*
+ *
+ * The result is zero only if one bit was set.
+ *
+ * (Note: We might have gone through several task switches before
+ * we come back to the current task, so WINDOWBASE might be
+ * different from the time the exception occurred.)
+ */
+
+ /* Test WINDOWSTART before and after the exception.
+ * We actually have WMASK, so we only have to test if it is 1 or not.
+ */
+
+ l32i a2, a1, PT_WMASK
+ _beqi a2, 1, common_exception_exit # Spilled before exception,jump
+
+ /* Test WINDOWSTART now. If spilled, do the movsp */
+
+ rsr a3, windowstart
+ addi a0, a3, -1
+ and a3, a3, a0
+ _bnez a3, common_exception_exit
+
+ /* Do a movsp (we returned from a call4, so we have at least a0..a7) */
+
+ addi a0, a1, -16
+ l32i a3, a0, 0
+ l32i a4, a0, 4
+ s32i a3, a1, PT_KERNEL_SIZE + 0
+ s32i a4, a1, PT_KERNEL_SIZE + 4
+ l32i a3, a0, 8
+ l32i a4, a0, 12
+ s32i a3, a1, PT_KERNEL_SIZE + 8
+ s32i a4, a1, PT_KERNEL_SIZE + 12
+
+ /* Common exception exit.
+ * We restore the special register and the current window frame, and
+ * return from the exception.
+ *
+ * Note: We expect a2 to hold PT_WMASK
+ */
+#else
+ movi a2, 1
+#endif
+
+common_exception_exit:
+
+ /* Restore address registers. */
+
+ _bbsi.l a2, 1, 1f
+ l32i a4, a1, PT_AREG4
+ l32i a5, a1, PT_AREG5
+ l32i a6, a1, PT_AREG6
+ l32i a7, a1, PT_AREG7
+ _bbsi.l a2, 2, 1f
+ l32i a8, a1, PT_AREG8
+ l32i a9, a1, PT_AREG9
+ l32i a10, a1, PT_AREG10
+ l32i a11, a1, PT_AREG11
+ _bbsi.l a2, 3, 1f
+ l32i a12, a1, PT_AREG12
+ l32i a13, a1, PT_AREG13
+ l32i a14, a1, PT_AREG14
+ l32i a15, a1, PT_AREG15
+
+ /* Restore PC, SAR */
+
+1: l32i a2, a1, PT_PC
+ l32i a3, a1, PT_SAR
+ wsr a2, epc1
+ wsr a3, sar
+
+ /* Restore LBEG, LEND, LCOUNT */
+#if XCHAL_HAVE_LOOPS
+ l32i a2, a1, PT_LBEG
+ l32i a3, a1, PT_LEND
+ wsr a2, lbeg
+ l32i a2, a1, PT_LCOUNT
+ wsr a3, lend
+ wsr a2, lcount
+#endif
+
+ /* We control single stepping through the ICOUNTLEVEL register. */
+
+ l32i a2, a1, PT_ICOUNTLEVEL
+ movi a3, -2
+ wsr a2, icountlevel
+ wsr a3, icount
+
+ /* Check if it was double exception. */
+
+ l32i a0, a1, PT_DEPC
+ l32i a3, a1, PT_AREG3
+ l32i a2, a1, PT_AREG2
+ _bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+ /* Restore a0...a3 and return */
+
+ l32i a0, a1, PT_AREG0
+ l32i a1, a1, PT_AREG1
+ rfe
+
+1: wsr a0, depc
+ l32i a0, a1, PT_AREG0
+ l32i a1, a1, PT_AREG1
+ rfde
+
+ENDPROC(kernel_exception)
+
+/*
+ * Debug exception handler.
+ *
+ * Currently, we don't support KGDB, so only user application can be debugged.
+ *
+ * When we get here, a0 is trashed and saved to excsave[debuglevel]
+ */
+
+ .literal_position
+
+ENTRY(debug_exception)
+
+ rsr a0, SREG_EPS + XCHAL_DEBUGLEVEL
+ bbsi.l a0, PS_EXCM_BIT, .Ldebug_exception_in_exception # exception mode
+
+ /* Set EPC1 and EXCCAUSE */
+
+ wsr a2, depc # save a2 temporarily
+ rsr a2, SREG_EPC + XCHAL_DEBUGLEVEL
+ wsr a2, epc1
+
+ movi a2, EXCCAUSE_MAPPED_DEBUG
+ wsr a2, exccause
+
+ /* Restore PS to the value before the debug exc but with PS.EXCM set.*/
+
+ movi a2, 1 << PS_EXCM_BIT
+ or a2, a0, a2
+ wsr a2, ps
+
+ /* Switch to kernel/user stack, restore jump vector, and save a0 */
+
+ bbsi.l a2, PS_UM_BIT, .Ldebug_exception_user # jump if user mode
+ addi a2, a1, -16 - PT_KERNEL_SIZE # assume kernel stack
+
+.Ldebug_exception_continue:
+ l32i a0, a3, DT_DEBUG_SAVE
+ s32i a1, a2, PT_AREG1
+ s32i a0, a2, PT_AREG0
+ movi a0, 0
+ s32i a0, a2, PT_DEPC # mark it as a regular exception
+ xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+ xsr a0, depc
+ s32i a3, a2, PT_AREG3
+ s32i a0, a2, PT_AREG2
+ mov a1, a2
+
+ /* Debug exception is handled as an exception, so interrupts will
+ * likely be enabled in the common exception handler. Disable
+ * preemption if we have HW breakpoints to preserve DEBUGCAUSE.DBNUM
+ * meaning.
+ */
+#if defined(CONFIG_PREEMPT_COUNT) && defined(CONFIG_HAVE_HW_BREAKPOINT)
+ GET_THREAD_INFO(a2, a1)
+ l32i a3, a2, TI_PRE_COUNT
+ addi a3, a3, 1
+ s32i a3, a2, TI_PRE_COUNT
+#endif
+
+ rsr a2, ps
+ bbsi.l a2, PS_UM_BIT, _user_exception
+ j _kernel_exception
+
+.Ldebug_exception_user:
+ rsr a2, excsave1
+ l32i a2, a2, EXC_TABLE_KSTK # load kernel stack pointer
+ j .Ldebug_exception_continue
+
+.Ldebug_exception_in_exception:
+#ifdef CONFIG_HAVE_HW_BREAKPOINT
+ /* Debug exception while in exception mode. This may happen when
+ * window overflow/underflow handler or fast exception handler hits
+ * data breakpoint, in which case save and disable all data
+ * breakpoints, single-step faulting instruction and restore data
+ * breakpoints.
+ */
+
+ bbci.l a0, PS_UM_BIT, .Ldebug_exception_in_exception # jump if kernel mode
+
+ rsr a0, debugcause
+ bbsi.l a0, DEBUGCAUSE_DBREAK_BIT, .Ldebug_save_dbreak
+
+ .set _index, 0
+ .rept XCHAL_NUM_DBREAK
+ l32i a0, a3, DT_DBREAKC_SAVE + _index * 4
+ wsr a0, SREG_DBREAKC + _index
+ .set _index, _index + 1
+ .endr
+
+ l32i a0, a3, DT_ICOUNT_LEVEL_SAVE
+ wsr a0, icountlevel
+
+ l32i a0, a3, DT_ICOUNT_SAVE
+ xsr a0, icount
+
+ l32i a0, a3, DT_DEBUG_SAVE
+ xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+ rfi XCHAL_DEBUGLEVEL
+
+.Ldebug_save_dbreak:
+ .set _index, 0
+ .rept XCHAL_NUM_DBREAK
+ movi a0, 0
+ xsr a0, SREG_DBREAKC + _index
+ s32i a0, a3, DT_DBREAKC_SAVE + _index * 4
+ .set _index, _index + 1
+ .endr
+
+ movi a0, XCHAL_EXCM_LEVEL + 1
+ xsr a0, icountlevel
+ s32i a0, a3, DT_ICOUNT_LEVEL_SAVE
+
+ movi a0, 0xfffffffe
+ xsr a0, icount
+ s32i a0, a3, DT_ICOUNT_SAVE
+
+ l32i a0, a3, DT_DEBUG_SAVE
+ xsr a3, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
+ rfi XCHAL_DEBUGLEVEL
+#else
+ /* Debug exception while in exception mode. Should not happen. */
+ j .Ldebug_exception_in_exception // FIXME!!
+#endif
+
+ENDPROC(debug_exception)
+
+/*
+ * We get here in case of an unrecoverable exception.
+ * The only thing we can do is to be nice and print a panic message.
+ * We only produce a single stack frame for panic, so ???
+ *
+ *
+ * Entry conditions:
+ *
+ * - a0 contains the caller address; original value saved in excsave1.
+ * - the original a0 contains a valid return address (backtrace) or 0.
+ * - a2 contains a valid stackpointer
+ *
+ * Notes:
+ *
+ * - If the stack pointer could be invalid, the caller has to setup a
+ * dummy stack pointer (e.g. the stack of the init_task)
+ *
+ * - If the return address could be invalid, the caller has to set it
+ * to 0, so the backtrace would stop.
+ *
+ */
+ .align 4
+unrecoverable_text:
+ .ascii "Unrecoverable error in exception handler\0"
+
+ .literal_position
+
+ENTRY(unrecoverable_exception)
+
+#if XCHAL_HAVE_WINDOWED
+ movi a0, 1
+ movi a1, 0
+
+ wsr a0, windowstart
+ wsr a1, windowbase
+ rsync
+#endif
+
+ movi a1, KERNEL_PS_WOE_MASK | LOCKLEVEL
+ wsr a1, ps
+ rsync
+
+ movi a1, init_task
+ movi a0, 0
+ addi a1, a1, PT_REGS_OFFSET
+
+ movi abi_arg0, unrecoverable_text
+ abi_call panic
+
+1: j 1b
+
+ENDPROC(unrecoverable_exception)
+
+/* -------------------------- FAST EXCEPTION HANDLERS ----------------------- */
+
+ __XTENSA_HANDLER
+ .literal_position
+
+#ifdef SUPPORT_WINDOWED
+/*
+ * Fast-handler for alloca exceptions
+ *
+ * The ALLOCA handler is entered when user code executes the MOVSP
+ * instruction and the caller's frame is not in the register file.
+ *
+ * This algorithm was taken from the Ross Morley's RTOS Porting Layer:
+ *
+ * /home/ross/rtos/porting/XtensaRTOS-PortingLayer-20090507/xtensa_vectors.S
+ *
+ * It leverages the existing window spill/fill routines and their support for
+ * double exceptions. The 'movsp' instruction will only cause an exception if
+ * the next window needs to be loaded. In fact this ALLOCA exception may be
+ * replaced at some point by changing the hardware to do a underflow exception
+ * of the proper size instead.
+ *
+ * This algorithm simply backs out the register changes started by the user
+ * exception handler, makes it appear that we have started a window underflow
+ * by rotating the window back and then setting the old window base (OWB) in
+ * the 'ps' register with the rolled back window base. The 'movsp' instruction
+ * will be re-executed and this time since the next window frames is in the
+ * active AR registers it won't cause an exception.
+ *
+ * If the WindowUnderflow code gets a TLB miss the page will get mapped
+ * the partial WindowUnderflow will be handled in the double exception
+ * handler.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_alloca)
+ rsr a0, windowbase
+ rotw -1
+ rsr a2, ps
+ extui a3, a2, PS_OWB_SHIFT, PS_OWB_WIDTH
+ xor a3, a3, a4
+ l32i a4, a6, PT_AREG0
+ l32i a1, a6, PT_DEPC
+ rsr a6, depc
+ wsr a1, depc
+ slli a3, a3, PS_OWB_SHIFT
+ xor a2, a2, a3
+ wsr a2, ps
+ rsync
+
+ _bbci.l a4, 31, 4f
+ rotw -1
+ _bbci.l a8, 30, 8f
+ rotw -1
+ j _WindowUnderflow12
+8: j _WindowUnderflow8
+4: j _WindowUnderflow4
+ENDPROC(fast_alloca)
+#endif
+
+#ifdef CONFIG_USER_ABI_CALL0_PROBE
+/*
+ * fast illegal instruction handler.
+ *
+ * This is used to fix up user PS.WOE on the exception caused
+ * by the first opcode related to register window. If PS.WOE is
+ * already set it goes directly to the common user exception handler.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ */
+
+ENTRY(fast_illegal_instruction_user)
+
+ rsr a0, ps
+ bbsi.l a0, PS_WOE_BIT, 1f
+ s32i a3, a2, PT_AREG3
+ movi a3, PS_WOE_MASK
+ or a0, a0, a3
+ wsr a0, ps
+#ifdef CONFIG_USER_ABI_CALL0_PROBE
+ GET_THREAD_INFO(a3, a2)
+ rsr a0, epc1
+ s32i a0, a3, TI_PS_WOE_FIX_ADDR
+#endif
+ l32i a3, a2, PT_AREG3
+ l32i a0, a2, PT_AREG0
+ rsr a2, depc
+ rfe
+1:
+ call0 user_exception
+
+ENDPROC(fast_illegal_instruction_user)
+#endif
+
+ /*
+ * fast system calls.
+ *
+ * WARNING: The kernel doesn't save the entire user context before
+ * handling a fast system call. These functions are small and short,
+ * usually offering some functionality not available to user tasks.
+ *
+ * BE CAREFUL TO PRESERVE THE USER'S CONTEXT.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ */
+
+ENTRY(fast_syscall_user)
+
+ /* Skip syscall. */
+
+ rsr a0, epc1
+ addi a0, a0, 3
+ wsr a0, epc1
+
+ l32i a0, a2, PT_DEPC
+ bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, fast_syscall_unrecoverable
+
+ rsr a0, depc # get syscall-nr
+ _beqz a0, fast_syscall_spill_registers
+ _beqi a0, __NR_xtensa, fast_syscall_xtensa
+
+ call0 user_exception
+
+ENDPROC(fast_syscall_user)
+
+ENTRY(fast_syscall_unrecoverable)
+
+ /* Restore all states. */
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ xsr a2, depc # restore a2, depc
+
+ wsr a0, excsave1
+ call0 unrecoverable_exception
+
+ENDPROC(fast_syscall_unrecoverable)
+
+/*
+ * sysxtensa syscall handler
+ *
+ * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused);
+ * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval);
+ * a2 a6 a3 a4 a5
+ *
+ * Entry condition:
+ *
+ * a0: a2 (syscall-nr), original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in a0 and DEPC
+ * a3: a3
+ * a4..a15: unchanged
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ *
+ * Note: we don't have to save a2; a2 holds the return value
+ */
+
+ .literal_position
+
+#ifdef CONFIG_FAST_SYSCALL_XTENSA
+
+ENTRY(fast_syscall_xtensa)
+
+ s32i a7, a2, PT_AREG7 # we need an additional register
+ movi a7, 4 # sizeof(unsigned int)
+ access_ok a3, a7, a0, a2, .Leac # a0: scratch reg, a2: sp
+
+ _bgeui a6, SYS_XTENSA_COUNT, .Lill
+ _bnei a6, SYS_XTENSA_ATOMIC_CMP_SWP, .Lnswp
+
+ /* Fall through for ATOMIC_CMP_SWP. */
+
+.Lswp: /* Atomic compare and swap */
+
+EX(.Leac) l32i a0, a3, 0 # read old value
+ bne a0, a4, 1f # same as old value? jump
+EX(.Leac) s32i a5, a3, 0 # different, modify value
+ l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, 1 # and return 1
+ rfe
+
+1: l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, 0 # return 0 (note that we cannot set
+ rfe
+
+.Lnswp: /* Atomic set, add, and exg_add. */
+
+EX(.Leac) l32i a7, a3, 0 # orig
+ addi a6, a6, -SYS_XTENSA_ATOMIC_SET
+ add a0, a4, a7 # + arg
+ moveqz a0, a4, a6 # set
+ addi a6, a6, SYS_XTENSA_ATOMIC_SET
+EX(.Leac) s32i a0, a3, 0 # write new value
+
+ mov a0, a2
+ mov a2, a7
+ l32i a7, a0, PT_AREG7 # restore a7
+ l32i a0, a0, PT_AREG0 # restore a0
+ rfe
+
+.Leac: l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -EFAULT
+ rfe
+
+.Lill: l32i a7, a2, PT_AREG7 # restore a7
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -EINVAL
+ rfe
+
+ENDPROC(fast_syscall_xtensa)
+
+#else /* CONFIG_FAST_SYSCALL_XTENSA */
+
+ENTRY(fast_syscall_xtensa)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_xtensa)
+
+#endif /* CONFIG_FAST_SYSCALL_XTENSA */
+
+
+/* fast_syscall_spill_registers.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * Note: We assume the stack pointer is EXC_TABLE_KSTK in the fixup handler.
+ */
+
+#if defined(CONFIG_FAST_SYSCALL_SPILL_REGISTERS) && \
+ defined(USER_SUPPORT_WINDOWED)
+
+ENTRY(fast_syscall_spill_registers)
+
+ /* Register a FIXUP handler (pass current wb as a parameter) */
+
+ xsr a3, excsave1
+ movi a0, fast_syscall_spill_registers_fixup
+ s32i a0, a3, EXC_TABLE_FIXUP
+ rsr a0, windowbase
+ s32i a0, a3, EXC_TABLE_PARAM
+ xsr a3, excsave1 # restore a3 and excsave_1
+
+ /* Save a3, a4 and SAR on stack. */
+
+ rsr a0, sar
+ s32i a3, a2, PT_AREG3
+ s32i a0, a2, PT_SAR
+
+ /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */
+
+ s32i a4, a2, PT_AREG4
+ s32i a7, a2, PT_AREG7
+ s32i a8, a2, PT_AREG8
+ s32i a11, a2, PT_AREG11
+ s32i a12, a2, PT_AREG12
+ s32i a15, a2, PT_AREG15
+
+ /*
+ * Rotate ws so that the current windowbase is at bit 0.
+ * Assume ws = xxxwww1yy (www1 current window frame).
+ * Rotate ws right so that a4 = yyxxxwww1.
+ */
+
+ rsr a0, windowbase
+ rsr a3, windowstart # a3 = xxxwww1yy
+ ssr a0 # holds WB
+ slli a0, a3, WSBITS
+ or a3, a3, a0 # a3 = xxxwww1yyxxxwww1yy
+ srl a3, a3 # a3 = 00xxxwww1yyxxxwww1
+
+ /* We are done if there are no more than the current register frame. */
+
+ extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww
+ movi a0, (1 << (WSBITS-1))
+ _beqz a3, .Lnospill # only one active frame? jump
+
+ /* We want 1 at the top, so that we return to the current windowbase */
+
+ or a3, a3, a0 # 1yyxxxwww
+
+ /* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
+
+ wsr a3, windowstart # save shifted windowstart
+ neg a0, a3
+ and a3, a0, a3 # first bit set from right: 000010000
+
+ ffs_ws a0, a3 # a0: shifts to skip empty frames
+ movi a3, WSBITS
+ sub a0, a3, a0 # WSBITS-a0:number of 0-bits from right
+ ssr a0 # save in SAR for later.
+
+ rsr a3, windowbase
+ add a3, a3, a0
+ wsr a3, windowbase
+ rsync
+
+ rsr a3, windowstart
+ srl a3, a3 # shift windowstart
+
+ /* WB is now just one frame below the oldest frame in the register
+ window. WS is shifted so the oldest frame is in bit 0, thus, WB
+ and WS differ by one 4-register frame. */
+
+ /* Save frames. Depending what call was used (call4, call8, call12),
+ * we have to save 4,8. or 12 registers.
+ */
+
+
+.Lloop: _bbsi.l a3, 1, .Lc4
+ _bbci.l a3, 2, .Lc12
+
+.Lc8: s32e a4, a13, -16
+ l32e a4, a5, -12
+ s32e a8, a4, -32
+ s32e a5, a13, -12
+ s32e a6, a13, -8
+ s32e a7, a13, -4
+ s32e a9, a4, -28
+ s32e a10, a4, -24
+ s32e a11, a4, -20
+ srli a11, a3, 2 # shift windowbase by 2
+ rotw 2
+ _bnei a3, 1, .Lloop
+ j .Lexit
+
+.Lc4: s32e a4, a9, -16
+ s32e a5, a9, -12
+ s32e a6, a9, -8
+ s32e a7, a9, -4
+
+ srli a7, a3, 1
+ rotw 1
+ _bnei a3, 1, .Lloop
+ j .Lexit
+
+.Lc12: _bbci.l a3, 3, .Linvalid_mask # bit 2 shouldn't be zero!
+
+ /* 12-register frame (call12) */
+
+ l32e a0, a5, -12
+ s32e a8, a0, -48
+ mov a8, a0
+
+ s32e a9, a8, -44
+ s32e a10, a8, -40
+ s32e a11, a8, -36
+ s32e a12, a8, -32
+ s32e a13, a8, -28
+ s32e a14, a8, -24
+ s32e a15, a8, -20
+ srli a15, a3, 3
+
+ /* The stack pointer for a4..a7 is out of reach, so we rotate the
+ * window, grab the stackpointer, and rotate back.
+ * Alternatively, we could also use the following approach, but that
+ * makes the fixup routine much more complicated:
+ * rotw 1
+ * s32e a0, a13, -16
+ * ...
+ * rotw 2
+ */
+
+ rotw 1
+ mov a4, a13
+ rotw -1
+
+ s32e a4, a8, -16
+ s32e a5, a8, -12
+ s32e a6, a8, -8
+ s32e a7, a8, -4
+
+ rotw 3
+
+ _beqi a3, 1, .Lexit
+ j .Lloop
+
+.Lexit:
+
+ /* Done. Do the final rotation and set WS */
+
+ rotw 1
+ rsr a3, windowbase
+ ssl a3
+ movi a3, 1
+ sll a3, a3
+ wsr a3, windowstart
+.Lnospill:
+
+ /* Advance PC, restore registers and SAR, and return from exception. */
+
+ l32i a3, a2, PT_SAR
+ l32i a0, a2, PT_AREG0
+ wsr a3, sar
+ l32i a3, a2, PT_AREG3
+
+ /* Restore clobbered registers. */
+
+ l32i a4, a2, PT_AREG4
+ l32i a7, a2, PT_AREG7
+ l32i a8, a2, PT_AREG8
+ l32i a11, a2, PT_AREG11
+ l32i a12, a2, PT_AREG12
+ l32i a15, a2, PT_AREG15
+
+ movi a2, 0
+ rfe
+
+.Linvalid_mask:
+
+ /* We get here because of an unrecoverable error in the window
+ * registers, so set up a dummy frame and kill the user application.
+ * Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
+ */
+
+ movi a0, 1
+ movi a1, 0
+
+ wsr a0, windowstart
+ wsr a1, windowbase
+ rsync
+
+ movi a0, 0
+
+ rsr a3, excsave1
+ l32i a1, a3, EXC_TABLE_KSTK
+
+ movi a4, KERNEL_PS_WOE_MASK | LOCKLEVEL
+ wsr a4, ps
+ rsync
+
+ movi abi_arg0, SIGSEGV
+ abi_call make_task_dead
+
+ /* shouldn't return, so panic */
+
+ wsr a0, excsave1
+ call0 unrecoverable_exception # should not return
+1: j 1b
+
+
+ENDPROC(fast_syscall_spill_registers)
+
+/* Fixup handler.
+ *
+ * We get here if the spill routine causes an exception, e.g. tlb miss.
+ * We basically restore WINDOWBASE and WINDOWSTART to the condition when
+ * we entered the spill routine and jump to the user exception handler.
+ *
+ * Note that we only need to restore the bits in windowstart that have not
+ * been spilled yet by the _spill_register routine. Luckily, a3 contains a
+ * rotated windowstart with only those bits set for frames that haven't been
+ * spilled yet. Because a3 is rotated such that bit 0 represents the register
+ * frame for the current windowbase - 1, we need to rotate a3 left by the
+ * value of the current windowbase + 1 and move it to windowstart.
+ *
+ * a0: value of depc, original value in depc
+ * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
+ * a3: exctable, original value in excsave1
+ */
+
+ENTRY(fast_syscall_spill_registers_fixup)
+
+ rsr a2, windowbase # get current windowbase (a2 is saved)
+ xsr a0, depc # restore depc and a0
+ ssl a2 # set shift (32 - WB)
+
+ /* We need to make sure the current registers (a0-a3) are preserved.
+ * To do this, we simply set the bit for the current window frame
+ * in WS, so that the exception handlers save them to the task stack.
+ *
+ * Note: we use a3 to set the windowbase, so we take a special care
+ * of it, saving it in the original _spill_registers frame across
+ * the exception handler call.
+ */
+
+ xsr a3, excsave1 # get spill-mask
+ slli a3, a3, 1 # shift left by one
+ addi a3, a3, 1 # set the bit for the current window frame
+
+ slli a2, a3, 32-WSBITS
+ src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy......
+ wsr a2, windowstart # set corrected windowstart
+
+ srli a3, a3, 1
+ rsr a2, excsave1
+ l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2
+ xsr a2, excsave1
+ s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3
+ l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task)
+ xsr a2, excsave1
+
+ /* Return to the original (user task) WINDOWBASE.
+ * We leave the following frame behind:
+ * a0, a1, a2 same
+ * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE)
+ * depc: depc (we have to return to that address)
+ * excsave_1: exctable
+ */
+
+ wsr a3, windowbase
+ rsync
+
+ /* We are now in the original frame when we entered _spill_registers:
+ * a0: return address
+ * a1: used, stack pointer
+ * a2: kernel stack pointer
+ * a3: available
+ * depc: exception address
+ * excsave: exctable
+ * Note: This frame might be the same as above.
+ */
+
+ /* Setup stack pointer. */
+
+ addi a2, a2, -PT_USER_SIZE
+ s32i a0, a2, PT_AREG0
+
+ /* Make sure we return to this fixup handler. */
+
+ movi a3, fast_syscall_spill_registers_fixup_return
+ s32i a3, a2, PT_DEPC # setup depc
+
+ /* Jump to the exception handler. */
+
+ rsr a3, excsave1
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
+ jx a0
+
+ENDPROC(fast_syscall_spill_registers_fixup)
+
+ENTRY(fast_syscall_spill_registers_fixup_return)
+
+ /* When we return here, all registers have been restored (a2: DEPC) */
+
+ wsr a2, depc # exception address
+
+ /* Restore fixup handler. */
+
+ rsr a2, excsave1
+ s32i a3, a2, EXC_TABLE_DOUBLE_SAVE
+ movi a3, fast_syscall_spill_registers_fixup
+ s32i a3, a2, EXC_TABLE_FIXUP
+ rsr a3, windowbase
+ s32i a3, a2, EXC_TABLE_PARAM
+ l32i a2, a2, EXC_TABLE_KSTK
+
+ /* Load WB at the time the exception occurred. */
+
+ rsr a3, sar # WB is still in SAR
+ neg a3, a3
+ wsr a3, windowbase
+ rsync
+
+ rsr a3, excsave1
+ l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
+
+ rfde
+
+ENDPROC(fast_syscall_spill_registers_fixup_return)
+
+#else /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
+ENTRY(fast_syscall_spill_registers)
+
+ l32i a0, a2, PT_AREG0 # restore a0
+ movi a2, -ENOSYS
+ rfe
+
+ENDPROC(fast_syscall_spill_registers)
+
+#endif /* CONFIG_FAST_SYSCALL_SPILL_REGISTERS */
+
+#ifdef CONFIG_MMU
+/*
+ * We should never get here. Bail out!
+ */
+
+ENTRY(fast_second_level_miss_double_kernel)
+
+1:
+ call0 unrecoverable_exception # should not return
+1: j 1b
+
+ENDPROC(fast_second_level_miss_double_kernel)
+
+/* First-level entry handler for user, kernel, and double 2nd-level
+ * TLB miss exceptions. Note that for now, user and kernel miss
+ * exceptions share the same entry point and are handled identically.
+ *
+ * An old, less-efficient C version of this function used to exist.
+ * We include it below, interleaved as comments, for reference.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_second_level_miss)
+
+ /* Save a1 and a3. Note: we don't expect a double exception. */
+
+ s32i a1, a2, PT_AREG1
+ s32i a3, a2, PT_AREG3
+
+ /* We need to map the page of PTEs for the user task. Find
+ * the pointer to that page. Also, it's possible for tsk->mm
+ * to be NULL while tsk->active_mm is nonzero if we faulted on
+ * a vmalloc address. In that rare case, we must use
+ * active_mm instead to avoid a fault in this handler. See
+ *
+ * http://mail.nl.linux.org/linux-mm/2002-08/msg00258.html
+ * (or search Internet on "mm vs. active_mm")
+ *
+ * if (!mm)
+ * mm = tsk->active_mm;
+ * pgd = pgd_offset (mm, regs->excvaddr);
+ * pmd = pmd_offset (pgd, regs->excvaddr);
+ * pmdval = *pmd;
+ */
+
+ GET_CURRENT(a1,a2)
+ l32i a0, a1, TASK_MM # tsk->mm
+ beqz a0, .Lfast_second_level_miss_no_mm
+
+.Lfast_second_level_miss_continue:
+ rsr a3, excvaddr # fault address
+ _PGD_OFFSET(a0, a3, a1)
+ l32i a0, a0, 0 # read pmdval
+ beqz a0, .Lfast_second_level_miss_no_pmd
+
+ /* Read ptevaddr and convert to top of page-table page.
+ *
+ * vpnval = read_ptevaddr_register() & PAGE_MASK;
+ * vpnval += DTLB_WAY_PGTABLE;
+ * pteval = mk_pte (virt_to_page(pmd_val(pmdval)), PAGE_KERNEL);
+ * write_dtlb_entry (pteval, vpnval);
+ *
+ * The messy computation for 'pteval' above really simplifies
+ * into the following:
+ *
+ * pteval = ((pmdval - PAGE_OFFSET + PHYS_OFFSET) & PAGE_MASK)
+ * | PAGE_DIRECTORY
+ */
+
+ movi a1, (PHYS_OFFSET - PAGE_OFFSET) & 0xffffffff
+ add a0, a0, a1 # pmdval - PAGE_OFFSET
+ extui a1, a0, 0, PAGE_SHIFT # ... & PAGE_MASK
+ xor a0, a0, a1
+
+ movi a1, _PAGE_DIRECTORY
+ or a0, a0, a1 # ... | PAGE_DIRECTORY
+
+ /*
+ * We utilize all three wired-ways (7-9) to hold pmd translations.
+ * Memory regions are mapped to the DTLBs according to bits 28 and 29.
+ * This allows to map the three most common regions to three different
+ * DTLBs:
+ * 0,1 -> way 7 program (0040.0000) and virtual (c000.0000)
+ * 2 -> way 8 shared libaries (2000.0000)
+ * 3 -> way 0 stack (3000.0000)
+ */
+
+ extui a3, a3, 28, 2 # addr. bit 28 and 29 0,1,2,3
+ rsr a1, ptevaddr
+ addx2 a3, a3, a3 # -> 0,3,6,9
+ srli a1, a1, PAGE_SHIFT
+ extui a3, a3, 2, 2 # -> 0,0,1,2
+ slli a1, a1, PAGE_SHIFT # ptevaddr & PAGE_MASK
+ addi a3, a3, DTLB_WAY_PGD
+ add a1, a1, a3 # ... + way_number
+
+.Lfast_second_level_miss_wdtlb:
+ wdtlb a0, a1
+ dsync
+
+ /* Exit critical section. */
+.Lfast_second_level_miss_skip_wdtlb:
+ rsr a3, excsave1
+ movi a0, 0
+ s32i a0, a3, EXC_TABLE_FIXUP
+
+ /* Restore the working registers, and return. */
+
+ l32i a0, a2, PT_AREG0
+ l32i a1, a2, PT_AREG1
+ l32i a3, a2, PT_AREG3
+ l32i a2, a2, PT_DEPC
+
+ bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+
+ /* Restore excsave1 and return. */
+
+ rsr a2, depc
+ rfe
+
+ /* Return from double exception. */
+
+1: xsr a2, depc
+ esync
+ rfde
+
+.Lfast_second_level_miss_no_mm:
+ l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0
+ bnez a0, .Lfast_second_level_miss_continue
+
+ /* Even more unlikely case active_mm == 0.
+ * We can get here with NMI in the middle of context_switch that
+ * touches vmalloc area.
+ */
+ movi a0, init_mm
+ j .Lfast_second_level_miss_continue
+
+.Lfast_second_level_miss_no_pmd:
+#if (DCACHE_WAY_SIZE > PAGE_SIZE)
+
+ /* Special case for cache aliasing.
+ * We (should) only get here if a clear_user_page, copy_user_page
+ * or the aliased cache flush functions got preemptively interrupted
+ * by another task. Re-establish temporary mapping to the
+ * TLBTEMP_BASE areas.
+ */
+
+ /* We shouldn't be in a double exception */
+
+ l32i a0, a2, PT_DEPC
+ bgeui a0, VALID_DOUBLE_EXCEPTION_ADDRESS, .Lfast_second_level_miss_slow
+
+ /* Make sure the exception originated in the special functions */
+
+ movi a0, __tlbtemp_mapping_start
+ rsr a3, epc1
+ bltu a3, a0, .Lfast_second_level_miss_slow
+ movi a0, __tlbtemp_mapping_end
+ bgeu a3, a0, .Lfast_second_level_miss_slow
+
+ /* Check if excvaddr was in one of the TLBTEMP_BASE areas. */
+
+ movi a3, TLBTEMP_BASE_1
+ rsr a0, excvaddr
+ bltu a0, a3, .Lfast_second_level_miss_slow
+
+ addi a1, a0, -TLBTEMP_SIZE
+ bgeu a1, a3, .Lfast_second_level_miss_slow
+
+ /* Check if we have to restore an ITLB mapping. */
+
+ movi a1, __tlbtemp_mapping_itlb
+ rsr a3, epc1
+ sub a3, a3, a1
+
+ /* Calculate VPN */
+
+ movi a1, PAGE_MASK
+ and a1, a1, a0
+
+ /* Jump for ITLB entry */
+
+ bgez a3, 1f
+
+ /* We can use up to two TLBTEMP areas, one for src and one for dst. */
+
+ extui a3, a0, PAGE_SHIFT + DCACHE_ALIAS_ORDER, 1
+ add a1, a3, a1
+
+ /* PPN is in a6 for the first TLBTEMP area and in a7 for the second. */
+
+ mov a0, a6
+ movnez a0, a7, a3
+ j .Lfast_second_level_miss_wdtlb
+
+ /* ITLB entry. We only use dst in a6. */
+
+1: witlb a6, a1
+ isync
+ j .Lfast_second_level_miss_skip_wdtlb
+
+
+#endif // DCACHE_WAY_SIZE > PAGE_SIZE
+
+ /* Invalid PGD, default exception handling */
+.Lfast_second_level_miss_slow:
+
+ rsr a1, depc
+ s32i a1, a2, PT_AREG2
+ mov a1, a2
+
+ rsr a2, ps
+ bbsi.l a2, PS_UM_BIT, 1f
+ call0 _kernel_exception
+1: call0 _user_exception
+
+ENDPROC(fast_second_level_miss)
+
+/*
+ * StoreProhibitedException
+ *
+ * Update the pte and invalidate the itlb mapping for this pte.
+ *
+ * Entry condition:
+ *
+ * a0: trashed, original value saved on stack (PT_AREG0)
+ * a1: a1
+ * a2: new stack pointer, original in DEPC
+ * a3: a3
+ * depc: a2, original value saved on stack (PT_DEPC)
+ * excsave_1: dispatch table
+ *
+ * PT_DEPC >= VALID_DOUBLE_EXCEPTION_ADDRESS: double exception, DEPC
+ * < VALID_DOUBLE_EXCEPTION_ADDRESS: regular exception
+ */
+
+ENTRY(fast_store_prohibited)
+
+ /* Save a1 and a3. */
+
+ s32i a1, a2, PT_AREG1
+ s32i a3, a2, PT_AREG3
+
+ GET_CURRENT(a1,a2)
+ l32i a0, a1, TASK_MM # tsk->mm
+ beqz a0, .Lfast_store_no_mm
+
+.Lfast_store_continue:
+ rsr a1, excvaddr # fault address
+ _PGD_OFFSET(a0, a1, a3)
+ l32i a0, a0, 0
+ beqz a0, .Lfast_store_slow
+
+ /*
+ * Note that we test _PAGE_WRITABLE_BIT only if PTE is present
+ * and is not PAGE_NONE. See pgtable.h for possible PTE layouts.
+ */
+
+ _PTE_OFFSET(a0, a1, a3)
+ l32i a3, a0, 0 # read pteval
+ movi a1, _PAGE_CA_INVALID
+ ball a3, a1, .Lfast_store_slow
+ bbci.l a3, _PAGE_WRITABLE_BIT, .Lfast_store_slow
+
+ movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE
+ or a3, a3, a1
+ rsr a1, excvaddr
+ s32i a3, a0, 0
+
+ /* We need to flush the cache if we have page coloring. */
+#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK
+ dhwb a0, 0
+#endif
+ pdtlb a0, a1
+ wdtlb a3, a0
+
+ /* Exit critical section. */
+
+ movi a0, 0
+ rsr a3, excsave1
+ s32i a0, a3, EXC_TABLE_FIXUP
+
+ /* Restore the working registers, and return. */
+
+ l32i a3, a2, PT_AREG3
+ l32i a1, a2, PT_AREG1
+ l32i a0, a2, PT_AREG0
+ l32i a2, a2, PT_DEPC
+
+ bgeui a2, VALID_DOUBLE_EXCEPTION_ADDRESS, 1f
+ rsr a2, depc
+ rfe
+
+ /* Double exception. Restore FIXUP handler and return. */
+
+1: xsr a2, depc
+ esync
+ rfde
+
+.Lfast_store_no_mm:
+ l32i a0, a1, TASK_ACTIVE_MM # unlikely case mm == 0
+ j .Lfast_store_continue
+
+ /* If there was a problem, handle fault in C */
+.Lfast_store_slow:
+ rsr a1, excvaddr
+ pdtlb a0, a1
+ bbci.l a0, DTLB_HIT_BIT, 1f
+ idtlb a0
+1:
+ rsr a3, depc # still holds a2
+ s32i a3, a2, PT_AREG2
+ mov a1, a2
+
+ rsr a2, ps
+ bbsi.l a2, PS_UM_BIT, 1f
+ call0 _kernel_exception
+1: call0 _user_exception
+
+ENDPROC(fast_store_prohibited)
+
+#endif /* CONFIG_MMU */
+
+ .text
+/*
+ * System Calls.
+ *
+ * void system_call (struct pt_regs* regs, int exccause)
+ * a2 a3
+ */
+ .literal_position
+
+ENTRY(system_call)
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ abi_entry_default
+#elif defined(__XTENSA_CALL0_ABI__)
+ abi_entry(12)
+
+ s32i a0, sp, 0
+ s32i abi_saved0, sp, 4
+ s32i abi_saved1, sp, 8
+ mov abi_saved0, a2
+#else
+#error Unsupported Xtensa ABI
+#endif
+
+ /* regs->syscall = regs->areg[2] */
+
+ l32i a7, abi_saved0, PT_AREG2
+ s32i a7, abi_saved0, PT_SYSCALL
+
+ GET_THREAD_INFO(a4, a1)
+ l32i abi_saved1, a4, TI_FLAGS
+ movi a4, _TIF_WORK_MASK
+ and abi_saved1, abi_saved1, a4
+ beqz abi_saved1, 1f
+
+ mov abi_arg0, abi_saved0
+ abi_call do_syscall_trace_enter
+ beqz abi_rv, .Lsyscall_exit
+ l32i a7, abi_saved0, PT_SYSCALL
+
+1:
+ /* syscall = sys_call_table[syscall_nr] */
+
+ movi a4, sys_call_table
+ movi a5, __NR_syscalls
+ movi abi_rv, -ENOSYS
+ bgeu a7, a5, 1f
+
+ addx4 a4, a7, a4
+ l32i abi_tmp0, a4, 0
+
+ /* Load args: arg0 - arg5 are passed via regs. */
+
+ l32i abi_arg0, abi_saved0, PT_AREG6
+ l32i abi_arg1, abi_saved0, PT_AREG3
+ l32i abi_arg2, abi_saved0, PT_AREG4
+ l32i abi_arg3, abi_saved0, PT_AREG5
+ l32i abi_arg4, abi_saved0, PT_AREG8
+ l32i abi_arg5, abi_saved0, PT_AREG9
+
+ abi_callx abi_tmp0
+
+1: /* regs->areg[2] = return_value */
+
+ s32i abi_rv, abi_saved0, PT_AREG2
+ bnez abi_saved1, 1f
+.Lsyscall_exit:
+#if defined(__XTENSA_WINDOWED_ABI__)
+ abi_ret_default
+#elif defined(__XTENSA_CALL0_ABI__)
+ l32i a0, sp, 0
+ l32i abi_saved0, sp, 4
+ l32i abi_saved1, sp, 8
+ abi_ret(12)
+#else
+#error Unsupported Xtensa ABI
+#endif
+
+1:
+ mov abi_arg0, abi_saved0
+ abi_call do_syscall_trace_leave
+ j .Lsyscall_exit
+
+ENDPROC(system_call)
+
+/*
+ * Spill live registers on the kernel stack macro.
+ *
+ * Entry condition: ps.woe is set, ps.excm is cleared
+ * Exit condition: windowstart has single bit set
+ * May clobber: a12, a13
+ */
+ .macro spill_registers_kernel
+
+#if XCHAL_NUM_AREGS > 16
+ call12 1f
+ _j 2f
+ retw
+ .align 4
+1:
+ _entry a1, 48
+ addi a12, a0, 3
+#if XCHAL_NUM_AREGS > 32
+ .rept (XCHAL_NUM_AREGS - 32) / 12
+ _entry a1, 48
+ mov a12, a0
+ .endr
+#endif
+ _entry a1, 16
+#if XCHAL_NUM_AREGS % 12 == 0
+ mov a8, a8
+#elif XCHAL_NUM_AREGS % 12 == 4
+ mov a12, a12
+#elif XCHAL_NUM_AREGS % 12 == 8
+ mov a4, a4
+#endif
+ retw
+2:
+#else
+ mov a12, a12
+#endif
+ .endm
+
+/*
+ * Task switch.
+ *
+ * struct task* _switch_to (struct task* prev, struct task* next)
+ * a2 a2 a3
+ */
+
+ENTRY(_switch_to)
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ abi_entry(XTENSA_SPILL_STACK_RESERVE)
+#elif defined(__XTENSA_CALL0_ABI__)
+ abi_entry(16)
+
+ s32i a12, sp, 0
+ s32i a13, sp, 4
+ s32i a14, sp, 8
+ s32i a15, sp, 12
+#else
+#error Unsupported Xtensa ABI
+#endif
+ mov a11, a3 # and 'next' (a3)
+
+ l32i a4, a2, TASK_THREAD_INFO
+ l32i a5, a3, TASK_THREAD_INFO
+
+ save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
+
+#if THREAD_RA > 1020 || THREAD_SP > 1020
+ addi a10, a2, TASK_THREAD
+ s32i a0, a10, THREAD_RA - TASK_THREAD # save return address
+ s32i a1, a10, THREAD_SP - TASK_THREAD # save stack pointer
+#else
+ s32i a0, a2, THREAD_RA # save return address
+ s32i a1, a2, THREAD_SP # save stack pointer
+#endif
+
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
+ movi a6, __stack_chk_guard
+ l32i a8, a3, TASK_STACK_CANARY
+ s32i a8, a6, 0
+#endif
+
+ /* Disable ints while we manipulate the stack pointer. */
+
+ irq_save a14, a3
+ rsync
+
+ /* Switch CPENABLE */
+
+#if (XTENSA_HAVE_COPROCESSORS || XTENSA_HAVE_IO_PORTS)
+ l32i a3, a5, THREAD_CPENABLE
+#ifdef CONFIG_SMP
+ beqz a3, 1f
+ memw # pairs with memw (2) in fast_coprocessor
+ l32i a6, a5, THREAD_CP_OWNER_CPU
+ l32i a7, a5, THREAD_CPU
+ beq a6, a7, 1f # load 0 into CPENABLE if current CPU is not the owner
+ movi a3, 0
+1:
+#endif
+ wsr a3, cpenable
+#endif
+
+#if XCHAL_HAVE_EXCLUSIVE
+ l32i a3, a5, THREAD_ATOMCTL8
+ getex a3
+ s32i a3, a4, THREAD_ATOMCTL8
+#endif
+
+ /* Flush register file. */
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ spill_registers_kernel
+#endif
+
+ /* Set kernel stack (and leave critical section)
+ * Note: It's save to set it here. The stack will not be overwritten
+ * because the kernel stack will only be loaded again after
+ * we return from kernel space.
+ */
+
+ rsr a3, excsave1 # exc_table
+ addi a7, a5, PT_REGS_OFFSET
+ s32i a7, a3, EXC_TABLE_KSTK
+
+ /* restore context of the task 'next' */
+
+ l32i a0, a11, THREAD_RA # restore return address
+ l32i a1, a11, THREAD_SP # restore stack pointer
+
+ load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
+
+ wsr a14, ps
+ rsync
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ abi_ret(XTENSA_SPILL_STACK_RESERVE)
+#elif defined(__XTENSA_CALL0_ABI__)
+ l32i a12, sp, 0
+ l32i a13, sp, 4
+ l32i a14, sp, 8
+ l32i a15, sp, 12
+ abi_ret(16)
+#else
+#error Unsupported Xtensa ABI
+#endif
+
+ENDPROC(_switch_to)
+
+ENTRY(ret_from_fork)
+
+ /* void schedule_tail (struct task_struct *prev)
+ * Note: prev is still in abi_arg0 (return value from fake call frame)
+ */
+ abi_call schedule_tail
+
+ mov abi_arg0, a1
+ abi_call do_syscall_trace_leave
+ j common_exception_return
+
+ENDPROC(ret_from_fork)
+
+/*
+ * Kernel thread creation helper
+ * On entry, set up by copy_thread: abi_saved0 = thread_fn,
+ * abi_saved1 = thread_fn arg. Left from _switch_to: abi_arg0 = prev
+ */
+ENTRY(ret_from_kernel_thread)
+
+ abi_call schedule_tail
+ mov abi_arg0, abi_saved1
+ abi_callx abi_saved0
+ j common_exception_return
+
+ENDPROC(ret_from_kernel_thread)
+
+#ifdef CONFIG_HIBERNATION
+
+ .section .bss, "aw"
+ .align 4
+.Lsaved_regs:
+#if defined(__XTENSA_WINDOWED_ABI__)
+ .fill 2, 4
+#elif defined(__XTENSA_CALL0_ABI__)
+ .fill 6, 4
+#else
+#error Unsupported Xtensa ABI
+#endif
+ .align XCHAL_NCP_SA_ALIGN
+.Lsaved_user_regs:
+ .fill XTREGS_USER_SIZE, 1
+
+ .previous
+
+ENTRY(swsusp_arch_suspend)
+
+ abi_entry_default
+
+ movi a2, .Lsaved_regs
+ movi a3, .Lsaved_user_regs
+ s32i a0, a2, 0
+ s32i a1, a2, 4
+ save_xtregs_user a3 a4 a5 a6 a7 a8 0
+#if defined(__XTENSA_WINDOWED_ABI__)
+ spill_registers_kernel
+#elif defined(__XTENSA_CALL0_ABI__)
+ s32i a12, a2, 8
+ s32i a13, a2, 12
+ s32i a14, a2, 16
+ s32i a15, a2, 20
+#else
+#error Unsupported Xtensa ABI
+#endif
+ abi_call swsusp_save
+ mov a2, abi_rv
+ abi_ret_default
+
+ENDPROC(swsusp_arch_suspend)
+
+ENTRY(swsusp_arch_resume)
+
+ abi_entry_default
+
+#if defined(__XTENSA_WINDOWED_ABI__)
+ spill_registers_kernel
+#endif
+
+ movi a2, restore_pblist
+ l32i a2, a2, 0
+
+.Lcopy_pbe:
+ l32i a3, a2, PBE_ADDRESS
+ l32i a4, a2, PBE_ORIG_ADDRESS
+
+ __loopi a3, a9, PAGE_SIZE, 16
+ l32i a5, a3, 0
+ l32i a6, a3, 4
+ l32i a7, a3, 8
+ l32i a8, a3, 12
+ addi a3, a3, 16
+ s32i a5, a4, 0
+ s32i a6, a4, 4
+ s32i a7, a4, 8
+ s32i a8, a4, 12
+ addi a4, a4, 16
+ __endl a3, a9
+
+ l32i a2, a2, PBE_NEXT
+ bnez a2, .Lcopy_pbe
+
+ movi a2, .Lsaved_regs
+ movi a3, .Lsaved_user_regs
+ l32i a0, a2, 0
+ l32i a1, a2, 4
+ load_xtregs_user a3 a4 a5 a6 a7 a8 0
+#if defined(__XTENSA_CALL0_ABI__)
+ l32i a12, a2, 8
+ l32i a13, a2, 12
+ l32i a14, a2, 16
+ l32i a15, a2, 20
+#endif
+ movi a2, 0
+ abi_ret_default
+
+ENDPROC(swsusp_arch_resume)
+
+#endif