summaryrefslogtreecommitdiffstats
path: root/arch/xtensa/kernel/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/xtensa/kernel/head.S')
-rw-r--r--arch/xtensa/kernel/head.S386
1 files changed, 386 insertions, 0 deletions
diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S
new file mode 100644
index 000000000..8484294bc
--- /dev/null
+++ b/arch/xtensa/kernel/head.S
@@ -0,0 +1,386 @@
+/*
+ * arch/xtensa/kernel/head.S
+ *
+ * Xtensa Processor startup code.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001 - 2008 Tensilica Inc.
+ *
+ * Chris Zankel <chris@zankel.net>
+ * Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
+ * Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
+ * Kevin Chea
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cacheasm.h>
+#include <asm/initialize_mmu.h>
+#include <asm/mxregs.h>
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ *
+ * Prerequisites:
+ *
+ * - The kernel image has been loaded to the actual address where it was
+ * compiled to.
+ * - a2 contains either 0 or a pointer to a list of boot parameters.
+ * (see setup.c for more details)
+ *
+ */
+
+/*
+ * _start
+ *
+ * The bootloader passes a pointer to a list of boot parameters in a2.
+ */
+
+ /* The first bytes of the kernel image must be an instruction, so we
+ * manually allocate and define the literal constant we need for a jx
+ * instruction.
+ */
+
+ __HEAD
+ .begin no-absolute-literals
+
+ENTRY(_start)
+
+ /* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
+ wsr a2, excsave1
+ _j _SetupOCD
+
+ .align 4
+ .literal_position
+_SetupOCD:
+ /*
+ * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
+ * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
+ * xt-gdb to single step via DEBUG exceptions received directly
+ * by ocd.
+ */
+#if XCHAL_HAVE_WINDOWED
+ movi a1, 1
+ movi a0, 0
+ wsr a1, windowstart
+ wsr a0, windowbase
+ rsync
+#endif
+
+ movi a1, LOCKLEVEL
+ wsr a1, ps
+ rsync
+
+ .global _SetupMMU
+_SetupMMU:
+ Offset = _SetupMMU - _start
+
+#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+ initialize_mmu
+#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+ rsr a2, excsave1
+ movi a3, XCHAL_KSEG_PADDR
+ bltu a2, a3, 1f
+ sub a2, a2, a3
+ movi a3, XCHAL_KSEG_SIZE
+ bgeu a2, a3, 1f
+ movi a3, XCHAL_KSEG_CACHED_VADDR
+ add a2, a2, a3
+ wsr a2, excsave1
+1:
+#endif
+#endif
+
+ movi a0, _startup
+ jx a0
+
+ENDPROC(_start)
+ .end no-absolute-literals
+
+ __REF
+ .literal_position
+
+ENTRY(_startup)
+
+ /* Set a0 to 0 for the remaining initialization. */
+
+ movi a0, 0
+
+#if XCHAL_HAVE_VECBASE
+ movi a2, VECBASE_VADDR
+ wsr a2, vecbase
+#endif
+
+ /* Clear debugging registers. */
+
+#if XCHAL_HAVE_DEBUG
+#if XCHAL_NUM_IBREAK > 0
+ wsr a0, ibreakenable
+#endif
+ wsr a0, icount
+ movi a1, 15
+ wsr a0, icountlevel
+
+ .set _index, 0
+ .rept XCHAL_NUM_DBREAK
+ wsr a0, SREG_DBREAKC + _index
+ .set _index, _index + 1
+ .endr
+#endif
+
+ /* Clear CCOUNT (not really necessary, but nice) */
+
+ wsr a0, ccount # not really necessary, but nice
+
+ /* Disable zero-loops. */
+
+#if XCHAL_HAVE_LOOPS
+ wsr a0, lcount
+#endif
+
+ /* Disable all timers. */
+
+ .set _index, 0
+ .rept XCHAL_NUM_TIMERS
+ wsr a0, SREG_CCOMPARE + _index
+ .set _index, _index + 1
+ .endr
+
+ /* Interrupt initialization. */
+
+ movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
+ wsr a0, intenable
+ wsr a2, intclear
+
+ /* Disable coprocessors. */
+
+#if XCHAL_HAVE_CP
+ wsr a0, cpenable
+#endif
+
+ /* Initialize the caches.
+ * a2, a3 are just working registers (clobbered).
+ */
+
+#if XCHAL_DCACHE_LINE_LOCKABLE
+ ___unlock_dcache_all a2 a3
+#endif
+
+#if XCHAL_ICACHE_LINE_LOCKABLE
+ ___unlock_icache_all a2 a3
+#endif
+
+ ___invalidate_dcache_all a2 a3
+ ___invalidate_icache_all a2 a3
+
+ isync
+
+ initialize_cacheattr
+
+#ifdef CONFIG_HAVE_SMP
+ movi a2, CCON # MX External Register to Configure Cache
+ movi a3, 1
+ wer a3, a2
+#endif
+
+ /* Setup stack and enable window exceptions (keep irqs disabled) */
+
+ movi a1, start_info
+ l32i a1, a1, 0
+
+ /* Disable interrupts. */
+ /* Enable window exceptions if kernel is built with windowed ABI. */
+ movi a2, KERNEL_PS_WOE_MASK | LOCKLEVEL
+ wsr a2, ps
+ rsync
+
+#ifdef CONFIG_SMP
+ /*
+ * Notice that we assume with SMP that cores have PRID
+ * supported by the cores.
+ */
+ rsr a2, prid
+ bnez a2, .Lboot_secondary
+
+#endif /* CONFIG_SMP */
+
+ /* Unpack data sections
+ *
+ * The linker script used to build the Linux kernel image
+ * creates a table located at __boot_reloc_table_start
+ * that contains the information what data needs to be unpacked.
+ *
+ * Uses a2-a7.
+ */
+
+ movi a2, __boot_reloc_table_start
+ movi a3, __boot_reloc_table_end
+
+1: beq a2, a3, 3f # no more entries?
+ l32i a4, a2, 0 # start destination (in RAM)
+ l32i a5, a2, 4 # end destination (in RAM)
+ l32i a6, a2, 8 # start source (in ROM)
+ addi a2, a2, 12 # next entry
+ beq a4, a5, 1b # skip, empty entry
+ beq a4, a6, 1b # skip, source and dest. are the same
+
+2: l32i a7, a6, 0 # load word
+ addi a6, a6, 4
+ s32i a7, a4, 0 # store word
+ addi a4, a4, 4
+ bltu a4, a5, 2b
+ j 1b
+
+3:
+ /* All code and initialized data segments have been copied.
+ * Now clear the BSS segment.
+ */
+
+ movi a2, __bss_start # start of BSS
+ movi a3, __bss_stop # end of BSS
+
+ __loopt a2, a3, a4, 2
+ s32i a0, a2, 0
+ __endla a2, a3, 4
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+
+ /* After unpacking, flush the writeback cache to memory so the
+ * instructions/data are available.
+ */
+
+ ___flush_dcache_all a2 a3
+#endif
+ memw
+ isync
+ ___invalidate_icache_all a2 a3
+ isync
+
+#ifdef CONFIG_XIP_KERNEL
+ /* Setup bootstrap CPU stack in XIP kernel */
+
+ movi a1, start_info
+ l32i a1, a1, 0
+#endif
+
+ movi abi_arg0, 0
+ xsr abi_arg0, excsave1
+
+ /* init_arch kick-starts the linux kernel */
+
+ abi_call init_arch
+ abi_call start_kernel
+
+should_never_return:
+ j should_never_return
+
+#ifdef CONFIG_SMP
+.Lboot_secondary:
+
+ movi a2, cpu_start_ccount
+1:
+ memw
+ l32i a3, a2, 0
+ beqi a3, 0, 1b
+ movi a3, 0
+ s32i a3, a2, 0
+1:
+ memw
+ l32i a3, a2, 0
+ beqi a3, 0, 1b
+ wsr a3, ccount
+ movi a3, 0
+ s32i a3, a2, 0
+ memw
+
+ movi abi_arg0, 0
+ wsr abi_arg0, excsave1
+
+ abi_call secondary_start_kernel
+ j should_never_return
+
+#endif /* CONFIG_SMP */
+
+ENDPROC(_startup)
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+ENTRY(cpu_restart)
+
+#if XCHAL_DCACHE_IS_WRITEBACK
+ ___flush_invalidate_dcache_all a2 a3
+#else
+ ___invalidate_dcache_all a2 a3
+#endif
+ memw
+ movi a2, CCON # MX External Register to Configure Cache
+ movi a3, 0
+ wer a3, a2
+ extw
+
+ rsr a0, prid
+ neg a2, a0
+ movi a3, cpu_start_id
+ memw
+ s32i a2, a3, 0
+#if XCHAL_DCACHE_IS_WRITEBACK
+ dhwbi a3, 0
+#endif
+1:
+ memw
+ l32i a2, a3, 0
+ dhi a3, 0
+ bne a2, a0, 1b
+
+ /*
+ * Initialize WB, WS, and clear PS.EXCM (to allow loop instructions).
+ * Set Interrupt Level just below XCHAL_DEBUGLEVEL to allow
+ * xt-gdb to single step via DEBUG exceptions received directly
+ * by ocd.
+ */
+ movi a1, 1
+ movi a0, 0
+ wsr a1, windowstart
+ wsr a0, windowbase
+ rsync
+
+ movi a1, LOCKLEVEL
+ wsr a1, ps
+ rsync
+
+ j _startup
+
+ENDPROC(cpu_restart)
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+/*
+ * DATA section
+ */
+
+ __REFDATA
+ .align 4
+ENTRY(start_info)
+ .long init_thread_union + KERNEL_STACK_SIZE
+
+/*
+ * BSS section
+ */
+
+__PAGE_ALIGNED_BSS
+#ifdef CONFIG_MMU
+ENTRY(swapper_pg_dir)
+ .fill PAGE_SIZE, 1, 0
+END(swapper_pg_dir)
+#endif
+ENTRY(empty_zero_page)
+ .fill PAGE_SIZE, 1, 0
+END(empty_zero_page)