diff options
Diffstat (limited to 'arch/xtensa/platforms/xtfpga/setup.c')
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/setup.c | 292 |
1 files changed, 292 insertions, 0 deletions
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c new file mode 100644 index 000000000..c79c1d09e --- /dev/null +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * arch/xtensa/platform/xtavnet/setup.c + * + * ... + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2006 Tensilica Inc. + */ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/of.h> +#include <linux/clk-provider.h> +#include <linux/of_address.h> +#include <linux/slab.h> + +#include <asm/timex.h> +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <platform/lcd.h> +#include <platform/hardware.h> + +void platform_halt(void) +{ + lcd_disp_at_pos(" HALT ", 0); + local_irq_disable(); + while (1) + cpu_relax(); +} + +void platform_power_off(void) +{ + lcd_disp_at_pos("POWEROFF", 0); + local_irq_disable(); + while (1) + cpu_relax(); +} + +void platform_restart(void) +{ + /* Try software reset first. */ + WRITE_ONCE(*(u32 *)XTFPGA_SWRST_VADDR, 0xdead); + + /* If software reset did not work, flush and reset the mmu, + * simulate a processor reset, and jump to the reset vector. + */ + cpu_reset(); + /* control never gets here */ +} + +#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT + +void __init platform_calibrate_ccount(void) +{ + ccount_freq = *(long *)XTFPGA_CLKFRQ_VADDR; +} + +#endif + +#ifdef CONFIG_USE_OF + +static void __init xtfpga_clk_setup(struct device_node *np) +{ + void __iomem *base = of_iomap(np, 0); + struct clk *clk; + u32 freq; + + if (!base) { + pr_err("%pOFn: invalid address\n", np); + return; + } + + freq = __raw_readl(base); + iounmap(base); + clk = clk_register_fixed_rate(NULL, np->name, NULL, 0, freq); + + if (IS_ERR(clk)) { + pr_err("%pOFn: clk registration failed\n", np); + return; + } + + if (of_clk_add_provider(np, of_clk_src_simple_get, clk)) { + pr_err("%pOFn: clk provider registration failed\n", np); + return; + } +} +CLK_OF_DECLARE(xtfpga_clk, "cdns,xtfpga-clock", xtfpga_clk_setup); + +#define MAC_LEN 6 +static void __init update_local_mac(struct device_node *node) +{ + struct property *newmac; + const u8* macaddr; + int prop_len; + + macaddr = of_get_property(node, "local-mac-address", &prop_len); + if (macaddr == NULL || prop_len != MAC_LEN) + return; + + newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL); + if (newmac == NULL) + return; + + newmac->value = newmac + 1; + newmac->length = MAC_LEN; + newmac->name = kstrdup("local-mac-address", GFP_KERNEL); + if (newmac->name == NULL) { + kfree(newmac); + return; + } + + memcpy(newmac->value, macaddr, MAC_LEN); + ((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f; + of_update_property(node, newmac); +} + +static int __init machine_setup(void) +{ + struct device_node *eth = NULL; + + if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc"))) + update_local_mac(eth); + of_node_put(eth); + return 0; +} +arch_initcall(machine_setup); + +#else + +#include <linux/serial_8250.h> +#include <linux/if.h> +#include <net/ethoc.h> +#include <linux/usb/c67x00.h> + +/*---------------------------------------------------------------------------- + * Ethernet -- OpenCores Ethernet MAC (ethoc driver) + */ + +static struct resource ethoc_res[] = { + [0] = { /* register space */ + .start = OETH_REGS_PADDR, + .end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* buffer space */ + .start = OETH_SRAMBUFF_PADDR, + .end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { /* IRQ number */ + .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct ethoc_platform_data ethoc_pdata = { + /* + * The MAC address for these boards is 00:50:c2:13:6f:xx. + * The last byte (here as zero) is read from the DIP switches on the + * board. + */ + .hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 }, + .phy_id = -1, + .big_endian = XCHAL_HAVE_BE, +}; + +static struct platform_device ethoc_device = { + .name = "ethoc", + .id = -1, + .num_resources = ARRAY_SIZE(ethoc_res), + .resource = ethoc_res, + .dev = { + .platform_data = ðoc_pdata, + }, +}; + +/*---------------------------------------------------------------------------- + * USB Host/Device -- Cypress CY7C67300 + */ + +static struct resource c67x00_res[] = { + [0] = { /* register space */ + .start = C67X00_PADDR, + .end = C67X00_PADDR + C67X00_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* IRQ number */ + .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), + .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct c67x00_platform_data c67x00_pdata = { + .sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED, + .hpi_regstep = 4, +}; + +static struct platform_device c67x00_device = { + .name = "c67x00", + .id = -1, + .num_resources = ARRAY_SIZE(c67x00_res), + .resource = c67x00_res, + .dev = { + .platform_data = &c67x00_pdata, + }, +}; + +/*---------------------------------------------------------------------------- + * UART + */ + +static struct resource serial_resource = { + .start = DUART16552_PADDR, + .end = DUART16552_PADDR + 0x1f, + .flags = IORESOURCE_MEM, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + [0] = { + .mapbase = DUART16552_PADDR, + .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM), + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32, + .regshift = 2, + .uartclk = 0, /* set in xtavnet_init() */ + }, + { }, +}; + +static struct platform_device xtavnet_uart = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = 1, + .resource = &serial_resource, +}; + +/* platform devices */ +static struct platform_device *platform_devices[] __initdata = { + ðoc_device, + &c67x00_device, + &xtavnet_uart, +}; + + +static int __init xtavnet_init(void) +{ + /* Ethernet MAC address. */ + ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR; + + /* Clock rate varies among FPGA bitstreams; board specific FPGA register + * reports the actual clock rate. + */ + serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR; + + + /* register platform devices */ + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + /* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user + * knows whether they set it correctly on the DIP switches. + */ + pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr); + ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR; + + return 0; +} + +/* + * Register to be done during do_initcalls(). + */ +arch_initcall(xtavnet_init); + +#endif /* CONFIG_USE_OF */ |