diff options
Diffstat (limited to 'drivers/ata/sata_sil.c')
| -rw-r--r-- | drivers/ata/sata_sil.c | 807 |
1 files changed, 807 insertions, 0 deletions
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c new file mode 100644 index 000000000..3b989a528 --- /dev/null +++ b/drivers/ata/sata_sil.c @@ -0,0 +1,807 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * sata_sil.c - Silicon Image SATA + * + * Maintained by: Tejun Heo <tj@kernel.org> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2005 Red Hat, Inc. + * Copyright 2003 Benjamin Herrenschmidt + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/driver-api/libata.rst + * + * Documentation for SiI 3112: + * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2 + * + * Other errata and documentation available under NDA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/dmi.h> + +#define DRV_NAME "sata_sil" +#define DRV_VERSION "2.4" + +#define SIL_DMA_BOUNDARY 0x7fffffffUL + +enum { + SIL_MMIO_BAR = 5, + + /* + * host flags + */ + SIL_FLAG_NO_SATA_IRQ = (1 << 28), + SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29), + SIL_FLAG_MOD15WRITE = (1 << 30), + + SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA, + + /* + * Controller IDs + */ + sil_3112 = 0, + sil_3112_no_sata_irq = 1, + sil_3512 = 2, + sil_3114 = 3, + + /* + * Register offsets + */ + SIL_SYSCFG = 0x48, + + /* + * Register bits + */ + /* SYSCFG */ + SIL_MASK_IDE0_INT = (1 << 22), + SIL_MASK_IDE1_INT = (1 << 23), + SIL_MASK_IDE2_INT = (1 << 24), + SIL_MASK_IDE3_INT = (1 << 25), + SIL_MASK_2PORT = SIL_MASK_IDE0_INT | SIL_MASK_IDE1_INT, + SIL_MASK_4PORT = SIL_MASK_2PORT | + SIL_MASK_IDE2_INT | SIL_MASK_IDE3_INT, + + /* BMDMA/BMDMA2 */ + SIL_INTR_STEERING = (1 << 1), + + SIL_DMA_ENABLE = (1 << 0), /* DMA run switch */ + SIL_DMA_RDWR = (1 << 3), /* DMA Rd-Wr */ + SIL_DMA_SATA_IRQ = (1 << 4), /* OR of all SATA IRQs */ + SIL_DMA_ACTIVE = (1 << 16), /* DMA running */ + SIL_DMA_ERROR = (1 << 17), /* PCI bus error */ + SIL_DMA_COMPLETE = (1 << 18), /* cmd complete / IRQ pending */ + SIL_DMA_N_SATA_IRQ = (1 << 6), /* SATA_IRQ for the next channel */ + SIL_DMA_N_ACTIVE = (1 << 24), /* ACTIVE for the next channel */ + SIL_DMA_N_ERROR = (1 << 25), /* ERROR for the next channel */ + SIL_DMA_N_COMPLETE = (1 << 26), /* COMPLETE for the next channel */ + + /* SIEN */ + SIL_SIEN_N = (1 << 16), /* triggered by SError.N */ + + /* + * Others + */ + SIL_QUIRK_MOD15WRITE = (1 << 0), + SIL_QUIRK_UDMA5MAX = (1 << 1), +}; + +static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +#ifdef CONFIG_PM_SLEEP +static int sil_pci_device_resume(struct pci_dev *pdev); +#endif +static void sil_dev_config(struct ata_device *dev); +static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); +static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed); +static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc); +static void sil_bmdma_setup(struct ata_queued_cmd *qc); +static void sil_bmdma_start(struct ata_queued_cmd *qc); +static void sil_bmdma_stop(struct ata_queued_cmd *qc); +static void sil_freeze(struct ata_port *ap); +static void sil_thaw(struct ata_port *ap); + + +static const struct pci_device_id sil_pci_tbl[] = { + { PCI_VDEVICE(CMD, 0x3112), sil_3112 }, + { PCI_VDEVICE(CMD, 0x0240), sil_3112 }, + { PCI_VDEVICE(CMD, 0x3512), sil_3512 }, + { PCI_VDEVICE(CMD, 0x3114), sil_3114 }, + { PCI_VDEVICE(ATI, 0x436e), sil_3112 }, + { PCI_VDEVICE(ATI, 0x4379), sil_3112_no_sata_irq }, + { PCI_VDEVICE(ATI, 0x437a), sil_3112_no_sata_irq }, + + { } /* terminate list */ +}; + + +/* TODO firmware versions should be added - eric */ +static const struct sil_drivelist { + const char *product; + unsigned int quirk; +} sil_blacklist [] = { + { "ST320012AS", SIL_QUIRK_MOD15WRITE }, + { "ST330013AS", SIL_QUIRK_MOD15WRITE }, + { "ST340017AS", SIL_QUIRK_MOD15WRITE }, + { "ST360015AS", SIL_QUIRK_MOD15WRITE }, + { "ST380023AS", SIL_QUIRK_MOD15WRITE }, + { "ST3120023AS", SIL_QUIRK_MOD15WRITE }, + { "ST340014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST360014ASL", SIL_QUIRK_MOD15WRITE }, + { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, + { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE }, + { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, + { } +}; + +static struct pci_driver sil_pci_driver = { + .name = DRV_NAME, + .id_table = sil_pci_tbl, + .probe = sil_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = sil_pci_device_resume, +#endif +}; + +static struct scsi_host_template sil_sht = { + ATA_BASE_SHT(DRV_NAME), + /** These controllers support Large Block Transfer which allows + transfer chunks up to 2GB and which cross 64KB boundaries, + therefore the DMA limits are more relaxed than standard ATA SFF. */ + .dma_boundary = SIL_DMA_BOUNDARY, + .sg_tablesize = ATA_MAX_PRD +}; + +static struct ata_port_operations sil_ops = { + .inherits = &ata_bmdma32_port_ops, + .dev_config = sil_dev_config, + .set_mode = sil_set_mode, + .bmdma_setup = sil_bmdma_setup, + .bmdma_start = sil_bmdma_start, + .bmdma_stop = sil_bmdma_stop, + .qc_prep = sil_qc_prep, + .freeze = sil_freeze, + .thaw = sil_thaw, + .scr_read = sil_scr_read, + .scr_write = sil_scr_write, +}; + +static const struct ata_port_info sil_port_info[] = { + /* sil_3112 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3112_no_sata_irq */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | + SIL_FLAG_NO_SATA_IRQ, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3512 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, + /* sil_3114 */ + { + .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &sil_ops, + }, +}; + +/* per-port register offsets */ +/* TODO: we can probably calculate rather than use a table */ +static const struct { + unsigned long tf; /* ATA taskfile register block */ + unsigned long ctl; /* ATA control/altstatus register block */ + unsigned long bmdma; /* DMA register block */ + unsigned long bmdma2; /* DMA register block #2 */ + unsigned long fifo_cfg; /* FIFO Valid Byte Count and Control */ + unsigned long scr; /* SATA control register block */ + unsigned long sien; /* SATA Interrupt Enable register */ + unsigned long xfer_mode;/* data transfer mode register */ + unsigned long sfis_cfg; /* SATA FIS reception config register */ +} sil_port[] = { + /* port 0 ... */ + /* tf ctl bmdma bmdma2 fifo scr sien mode sfis */ + { 0x80, 0x8A, 0x0, 0x10, 0x40, 0x100, 0x148, 0xb4, 0x14c }, + { 0xC0, 0xCA, 0x8, 0x18, 0x44, 0x180, 0x1c8, 0xf4, 0x1cc }, + { 0x280, 0x28A, 0x200, 0x210, 0x240, 0x300, 0x348, 0x2b4, 0x34c }, + { 0x2C0, 0x2CA, 0x208, 0x218, 0x244, 0x380, 0x3c8, 0x2f4, 0x3cc }, + /* ... port 3 */ +}; + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("low-level driver for Silicon Image SATA controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +static int slow_down; +module_param(slow_down, int, 0444); +MODULE_PARM_DESC(slow_down, "Sledgehammer used to work around random problems, by limiting commands to 15 sectors (0=off, 1=on)"); + + +static void sil_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + + /* clear start/stop bit - can safely always write 0 */ + iowrite8(0, bmdma2); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +static void sil_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *bmdma = ap->ioaddr.bmdma_addr; + + /* load PRD table addr. */ + iowrite32(ap->bmdma_prd_dma, bmdma + ATA_DMA_TABLE_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +static void sil_bmdma_start(struct ata_queued_cmd *qc) +{ + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + struct ata_port *ap = qc->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *bmdma2 = mmio_base + sil_port[ap->port_no].bmdma2; + u8 dmactl = ATA_DMA_START; + + /* set transfer direction, start host DMA transaction + Note: For Large Block Transfer to work, the DMA must be started + using the bmdma2 register. */ + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, bmdma2); +} + +/* The way God intended PCI IDE scatter/gather lists to look and behave... */ +static void sil_fill_sg(struct ata_queued_cmd *qc) +{ + struct scatterlist *sg; + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd, *last_prd = NULL; + unsigned int si; + + prd = &ap->bmdma_prd[0]; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + /* Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + u32 addr = (u32) sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + prd->addr = cpu_to_le32(addr); + prd->flags_len = cpu_to_le32(sg_len); + + last_prd = prd; + prd++; + } + + if (likely(last_prd)) + last_prd->flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +static enum ata_completion_errors sil_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return AC_ERR_OK; + + sil_fill_sg(qc); + + return AC_ERR_OK; +} + +static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) +{ + u8 cache_line = 0; + pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line); + return cache_line; +} + +/** + * sil_set_mode - wrap set_mode functions + * @link: link to set up + * @r_failed: returned device when we fail + * + * Wrap the libata method for device setup as after the setup we need + * to inspect the results and do some configuration work + */ + +static int sil_set_mode(struct ata_link *link, struct ata_device **r_failed) +{ + struct ata_port *ap = link->ap; + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; + struct ata_device *dev; + u32 tmp, dev_mode[2] = { }; + int rc; + + rc = ata_do_set_mode(link, r_failed); + if (rc) + return rc; + + ata_for_each_dev(dev, link, ALL) { + if (!ata_dev_enabled(dev)) + dev_mode[dev->devno] = 0; /* PIO0/1/2 */ + else if (dev->flags & ATA_DFLAG_PIO) + dev_mode[dev->devno] = 1; /* PIO3/4 */ + else + dev_mode[dev->devno] = 3; /* UDMA */ + /* value 2 indicates MDMA */ + } + + tmp = readl(addr); + tmp &= ~((1<<5) | (1<<4) | (1<<1) | (1<<0)); + tmp |= dev_mode[0]; + tmp |= (dev_mode[1] << 4); + writel(tmp, addr); + readl(addr); /* flush */ + return 0; +} + +static inline void __iomem *sil_scr_addr(struct ata_port *ap, + unsigned int sc_reg) +{ + void __iomem *offset = ap->ioaddr.scr_addr; + + switch (sc_reg) { + case SCR_STATUS: + return offset + 4; + case SCR_ERROR: + return offset + 8; + case SCR_CONTROL: + return offset; + default: + /* do nothing */ + break; + } + + return NULL; +} + +static int sil_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) +{ + void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); + + if (mmio) { + *val = readl(mmio); + return 0; + } + return -EINVAL; +} + +static int sil_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) +{ + void __iomem *mmio = sil_scr_addr(link->ap, sc_reg); + + if (mmio) { + writel(val, mmio); + return 0; + } + return -EINVAL; +} + +static void sil_host_intr(struct ata_port *ap, u32 bmdma2) +{ + struct ata_eh_info *ehi = &ap->link.eh_info; + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->link.active_tag); + u8 status; + + if (unlikely(bmdma2 & SIL_DMA_SATA_IRQ)) { + u32 serror = 0xffffffff; + + /* SIEN doesn't mask SATA IRQs on some 3112s. Those + * controllers continue to assert IRQ as long as + * SError bits are pending. Clear SError immediately. + */ + sil_scr_read(&ap->link, SCR_ERROR, &serror); + sil_scr_write(&ap->link, SCR_ERROR, serror); + + /* Sometimes spurious interrupts occur, double check + * it's PHYRDY CHG. + */ + if (serror & SERR_PHYRDY_CHG) { + ap->link.eh_info.serror |= serror; + goto freeze; + } + + if (!(bmdma2 & SIL_DMA_COMPLETE)) + return; + } + + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + /* this sometimes happens, just clear IRQ */ + ap->ops->sff_check_status(ap); + return; + } + + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ + + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. No + * need to check ata_is_atapi(qc->tf.protocol) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + goto err_hsm; + break; + case HSM_ST_LAST: + if (ata_is_dma(qc->tf.protocol)) { + /* clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (bmdma2 & SIL_DMA_ERROR) { + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; + default: + goto err_hsm; + } + + /* check main status, clearing INTRQ */ + status = ap->ops->sff_check_status(ap); + if (unlikely(status & ATA_BUSY)) + goto err_hsm; + + /* ack bmdma irq events */ + ata_bmdma_irq_clear(ap); + + /* kick HSM in the ass */ + ata_sff_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol)) + ata_ehi_push_desc(ehi, "BMDMA2 stat 0x%x", bmdma2); + + return; + + err_hsm: + qc->err_mask |= AC_ERR_HSM; + freeze: + ata_port_freeze(ap); +} + +static irqreturn_t sil_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + int handled = 0; + int i; + + spin_lock(&host->lock); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2); + + /* turn off SATA_IRQ if not supported */ + if (ap->flags & SIL_FLAG_NO_SATA_IRQ) + bmdma2 &= ~SIL_DMA_SATA_IRQ; + + if (bmdma2 == 0xffffffff || + !(bmdma2 & (SIL_DMA_COMPLETE | SIL_DMA_SATA_IRQ))) + continue; + + sil_host_intr(ap, bmdma2); + handled = 1; + } + + spin_unlock(&host->lock); + + return IRQ_RETVAL(handled); +} + +static void sil_freeze(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + u32 tmp; + + /* global IRQ mask doesn't block SATA IRQ, turn off explicitly */ + writel(0, mmio_base + sil_port[ap->port_no].sien); + + /* plug IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp |= SIL_MASK_IDE0_INT << ap->port_no; + writel(tmp, mmio_base + SIL_SYSCFG); + readl(mmio_base + SIL_SYSCFG); /* flush */ + + /* Ensure DMA_ENABLE is off. + * + * This is because the controller will not give us access to the + * taskfile registers while a DMA is in progress + */ + iowrite8(ioread8(ap->ioaddr.bmdma_addr) & ~SIL_DMA_ENABLE, + ap->ioaddr.bmdma_addr); + + /* According to ata_bmdma_stop, an HDMA transition requires + * on PIO cycle. But we can't read a taskfile register. + */ + ioread8(ap->ioaddr.bmdma_addr); +} + +static void sil_thaw(struct ata_port *ap) +{ + void __iomem *mmio_base = ap->host->iomap[SIL_MMIO_BAR]; + u32 tmp; + + /* clear IRQ */ + ap->ops->sff_check_status(ap); + ata_bmdma_irq_clear(ap); + + /* turn on SATA IRQ if supported */ + if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ)) + writel(SIL_SIEN_N, mmio_base + sil_port[ap->port_no].sien); + + /* turn on IRQ */ + tmp = readl(mmio_base + SIL_SYSCFG); + tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no); + writel(tmp, mmio_base + SIL_SYSCFG); +} + +/** + * sil_dev_config - Apply device/host-specific errata fixups + * @dev: Device to be examined + * + * After the IDENTIFY [PACKET] DEVICE step is complete, and a + * device is known to be present, this function is called. + * We apply two errata fixups which are specific to Silicon Image, + * a Seagate and a Maxtor fixup. + * + * For certain Seagate devices, we must limit the maximum sectors + * to under 8K. + * + * For certain Maxtor devices, we must not program the drive + * beyond udma5. + * + * Both fixups are unfairly pessimistic. As soon as I get more + * information on these errata, I will create a more exhaustive + * list, and apply the fixups to only the specific + * devices/hosts/firmwares that need it. + * + * 20040111 - Seagate drives affected by the Mod15Write bug are blacklisted + * The Maxtor quirk is in the blacklist, but I'm keeping the original + * pessimistic fix for the following reasons... + * - There seems to be less info on it, only one device gleaned off the + * Windows driver, maybe only one is affected. More info would be greatly + * appreciated. + * - But then again UDMA5 is hardly anything to complain about + */ +static void sil_dev_config(struct ata_device *dev) +{ + struct ata_port *ap = dev->link->ap; + int print_info = ap->link.eh_context.i.flags & ATA_EHI_PRINTINFO; + unsigned int n, quirks = 0; + unsigned char model_num[ATA_ID_PROD_LEN + 1]; + + /* This controller doesn't support trim */ + dev->horkage |= ATA_HORKAGE_NOTRIM; + + ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num)); + + for (n = 0; sil_blacklist[n].product; n++) + if (!strcmp(sil_blacklist[n].product, model_num)) { + quirks = sil_blacklist[n].quirk; + break; + } + + /* limit requests to 15 sectors */ + if (slow_down || + ((ap->flags & SIL_FLAG_MOD15WRITE) && + (quirks & SIL_QUIRK_MOD15WRITE))) { + if (print_info) + ata_dev_info(dev, + "applying Seagate errata fix (mod15write workaround)\n"); + dev->max_sectors = 15; + return; + } + + /* limit to udma5 */ + if (quirks & SIL_QUIRK_UDMA5MAX) { + if (print_info) + ata_dev_info(dev, "applying Maxtor errata fix %s\n", + model_num); + dev->udma_mask &= ATA_UDMA5; + return; + } +} + +static void sil_init_controller(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; + u8 cls; + u32 tmp; + int i; + + /* Initialize FIFO PCI bus arbitration */ + cls = sil_get_device_cache_line(pdev); + if (cls) { + cls >>= 3; + cls++; /* cls = (line_size/8)+1 */ + for (i = 0; i < host->n_ports; i++) + writew(cls << 8 | cls, + mmio_base + sil_port[i].fifo_cfg); + } else + dev_warn(&pdev->dev, + "cache line size not set. Driver may not function\n"); + + /* Apply R_ERR on DMA activate FIS errata workaround */ + if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { + int cnt; + + for (i = 0, cnt = 0; i < host->n_ports; i++) { + tmp = readl(mmio_base + sil_port[i].sfis_cfg); + if ((tmp & 0x3) != 0x01) + continue; + if (!cnt) + dev_info(&pdev->dev, + "Applying R_ERR on DMA activate FIS errata fix\n"); + writel(tmp & ~0x3, mmio_base + sil_port[i].sfis_cfg); + cnt++; + } + } + + if (host->n_ports == 4) { + /* flip the magic "make 4 ports work" bit */ + tmp = readl(mmio_base + sil_port[2].bmdma); + if ((tmp & SIL_INTR_STEERING) == 0) + writel(tmp | SIL_INTR_STEERING, + mmio_base + sil_port[2].bmdma); + } +} + +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + +static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int board_id = ent->driver_data; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct ata_host *host; + void __iomem *mmio_base; + int n_ports, rc; + unsigned int i; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + /* allocate host */ + n_ports = 2; + if (board_id == sil_3114) + n_ports = 4; + + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 1 << SIL_MMIO_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + + rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK); + if (rc) + return rc; + + mmio_base = host->iomap[SIL_MMIO_BAR]; + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; + + ioaddr->cmd_addr = mmio_base + sil_port[i].tf; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; + ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; + ioaddr->scr_addr = mmio_base + sil_port[i].scr; + ata_sff_std_ports(ioaddr); + + ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); + } + + /* initialize and activate */ + sil_init_controller(host); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, + &sil_sht); +} + +#ifdef CONFIG_PM_SLEEP +static int sil_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = pci_get_drvdata(pdev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + sil_init_controller(host); + ata_host_resume(host); + + return 0; +} +#endif + +module_pci_driver(sil_pci_driver); |