diff options
Diffstat (limited to 'drivers/edac')
78 files changed, 57225 insertions, 0 deletions
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig new file mode 100644 index 000000000..456602d37 --- /dev/null +++ b/drivers/edac/Kconfig @@ -0,0 +1,544 @@ +# +# EDAC Kconfig +# Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com +# Licensed and distributed under the GPL + +config EDAC_ATOMIC_SCRUB + bool + +config EDAC_SUPPORT + bool + +menuconfig EDAC + tristate "EDAC (Error Detection And Correction) reporting" + depends on HAS_IOMEM && EDAC_SUPPORT && RAS + help + EDAC is a subsystem along with hardware-specific drivers designed to + report hardware errors. These are low-level errors that are reported + in the CPU or supporting chipset or other subsystems: + memory errors, cache errors, PCI errors, thermal throttling, etc.. + If unsure, select 'Y'. + + The mailing list for the EDAC project is linux-edac@vger.kernel.org. + +if EDAC + +config EDAC_LEGACY_SYSFS + bool "EDAC legacy sysfs" + default y + help + Enable the compatibility sysfs nodes. + Use 'Y' if your edac utilities aren't ported to work with the newer + structures. + +config EDAC_DEBUG + bool "Debugging" + select DEBUG_FS + help + This turns on debugging information for the entire EDAC subsystem. + You do so by inserting edac_module with "edac_debug_level=x." Valid + levels are 0-4 (from low to high) and by default it is set to 2. + Usually you should select 'N' here. + +config EDAC_DECODE_MCE + tristate "Decode MCEs in human-readable form (only on AMD for now)" + depends on CPU_SUP_AMD && X86_MCE_AMD + default y + help + Enable this option if you want to decode Machine Check Exceptions + occurring on your machine in human-readable form. + + You should definitely say Y here in case you want to decode MCEs + which occur really early upon boot, before the module infrastructure + has been initialized. + +config EDAC_GHES + bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" + depends on ACPI_APEI_GHES && (EDAC=y) + select UEFI_CPER + help + Not all machines support hardware-driven error report. Some of those + provide a BIOS-driven error report mechanism via ACPI, using the + APEI/GHES driver. By enabling this option, the error reports provided + by GHES are sent to userspace via the EDAC API. + + When this option is enabled, it will disable the hardware-driven + mechanisms, if a GHES BIOS is detected, entering into the + "Firmware First" mode. + + It should be noticed that keeping both GHES and a hardware-driven + error mechanism won't work well, as BIOS will race with OS, while + reading the error registers. So, if you want to not use "Firmware + first" GHES error mechanism, you should disable GHES either at + compilation time or by passing "ghes.disable=1" Kernel parameter + at boot time. + + In doubt, say 'Y'. + +config EDAC_AMD64 + tristate "AMD64 (Opteron, Athlon64)" + depends on AMD_NB && EDAC_DECODE_MCE + help + Support for error detection and correction of DRAM ECC errors on + the AMD64 families (>= K8) of memory controllers. + + When EDAC_DEBUG is enabled, hardware error injection facilities + through sysfs are available: + + AMD CPUs up to and excluding family 0x17 provide for Memory + Error Injection into the ECC detection circuits. The amd64_edac + module allows the operator/user to inject Uncorrectable and + Correctable errors into DRAM. + + When enabled, in each of the respective memory controller directories + (/sys/devices/system/edac/mc/mcX), there are 3 input files: + + - inject_section (0..3, 16-byte section of 64-byte cacheline), + - inject_word (0..8, 16-bit word of 16-byte section), + - inject_ecc_vector (hex ecc vector: select bits of inject word) + + In addition, there are two control files, inject_read and inject_write, + which trigger the DRAM ECC Read and Write respectively. + +config EDAC_AL_MC + tristate "Amazon's Annapurna Lab Memory Controller" + depends on (ARCH_ALPINE || COMPILE_TEST) + help + Support for error detection and correction for Amazon's Annapurna + Labs Alpine chips which allow 1 bit correction and 2 bits detection. + +config EDAC_AMD76X + tristate "AMD 76x (760, 762, 768)" + depends on PCI && X86_32 + help + Support for error detection and correction on the AMD 76x + series of chipsets used with the Athlon processor. + +config EDAC_E7XXX + tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" + depends on PCI && X86_32 + help + Support for error detection and correction on the Intel + E7205, E7500, E7501 and E7505 server chipsets. + +config EDAC_E752X + tristate "Intel e752x (e7520, e7525, e7320) and 3100" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + E7520, E7525, E7320 server chipsets. + +config EDAC_I82443BXGX + tristate "Intel 82443BX/GX (440BX/GX)" + depends on PCI && X86_32 + depends on BROKEN + help + Support for error detection and correction on the Intel + 82443BX/GX memory controllers (440BX/GX chipsets). + +config EDAC_I82875P + tristate "Intel 82875p (D82875P, E7210)" + depends on PCI && X86_32 + help + Support for error detection and correction on the Intel + DP82785P and E7210 server chipsets. + +config EDAC_I82975X + tristate "Intel 82975x (D82975x)" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + DP82975x server chipsets. + +config EDAC_I3000 + tristate "Intel 3000/3010" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + 3000 and 3010 server chipsets. + +config EDAC_I3200 + tristate "Intel 3200" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + 3200 and 3210 server chipsets. + +config EDAC_IE31200 + tristate "Intel e312xx" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + E3-1200 based DRAM controllers. + +config EDAC_X38 + tristate "Intel X38" + depends on PCI && X86 + help + Support for error detection and correction on the Intel + X38 server chipsets. + +config EDAC_I5400 + tristate "Intel 5400 (Seaburg) chipsets" + depends on PCI && X86 + help + Support for error detection and correction the Intel + i5400 MCH chipset (Seaburg). + +config EDAC_I7CORE + tristate "Intel i7 Core (Nehalem) processors" + depends on PCI && X86 && X86_MCE_INTEL + help + Support for error detection and correction the Intel + i7 Core (Nehalem) Integrated Memory Controller that exists on + newer processors like i7 Core, i7 Core Extreme, Xeon 35xx + and Xeon 55xx processors. + +config EDAC_I82860 + tristate "Intel 82860" + depends on PCI && X86_32 + help + Support for error detection and correction on the Intel + 82860 chipset. + +config EDAC_R82600 + tristate "Radisys 82600 embedded chipset" + depends on PCI && X86_32 + help + Support for error detection and correction on the Radisys + 82600 embedded chipset. + +config EDAC_I5000 + tristate "Intel Greencreek/Blackford chipset" + depends on X86 && PCI + help + Support for error detection and correction the Intel + Greekcreek/Blackford chipsets. + +config EDAC_I5100 + tristate "Intel San Clemente MCH" + depends on X86 && PCI + help + Support for error detection and correction the Intel + San Clemente MCH. + +config EDAC_I7300 + tristate "Intel Clarksboro MCH" + depends on X86 && PCI + help + Support for error detection and correction the Intel + Clarksboro MCH (Intel 7300 chipset). + +config EDAC_SBRIDGE + tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" + depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG + help + Support for error detection and correction the Intel + Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. + +config EDAC_SKX + tristate "Intel Skylake server Integrated MC" + depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI + depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y + select DMI + select ACPI_ADXL + help + Support for error detection and correction the Intel + Skylake server Integrated Memory Controllers. If your + system has non-volatile DIMMs you should also manually + select CONFIG_ACPI_NFIT. + +config EDAC_I10NM + tristate "Intel 10nm server Integrated MC" + depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI + depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y + select DMI + select ACPI_ADXL + help + Support for error detection and correction the Intel + 10nm server Integrated Memory Controllers. If your + system has non-volatile DIMMs you should also manually + select CONFIG_ACPI_NFIT. + +config EDAC_PND2 + tristate "Intel Pondicherry2" + depends on PCI && X86_64 && X86_MCE_INTEL + select P2SB if X86 + help + Support for error detection and correction on the Intel + Pondicherry2 Integrated Memory Controller. This SoC IP is + first used on the Apollo Lake platform and Denverton + micro-server but may appear on others in the future. + +config EDAC_IGEN6 + tristate "Intel client SoC Integrated MC" + depends on PCI && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG + depends on X86_64 && X86_MCE_INTEL + help + Support for error detection and correction on the Intel + client SoC Integrated Memory Controller using In-Band ECC IP. + This In-Band ECC is first used on the Elkhart Lake SoC but + may appear on others in the future. + +config EDAC_MPC85XX + bool "Freescale MPC83xx / MPC85xx" + depends on FSL_SOC && EDAC=y + help + Support for error detection and correction on the Freescale + MPC8349, MPC8560, MPC8540, MPC8548, T4240 + +config EDAC_LAYERSCAPE + tristate "Freescale Layerscape DDR" + depends on ARCH_LAYERSCAPE || SOC_LS1021A + help + Support for error detection and correction on Freescale memory + controllers on Layerscape SoCs. + +config EDAC_PASEMI + tristate "PA Semi PWRficient" + depends on PPC_PASEMI && PCI + help + Support for error detection and correction on PA Semi + PWRficient. + +config EDAC_CELL + tristate "Cell Broadband Engine memory controller" + depends on PPC_CELL_COMMON + help + Support for error detection and correction on the + Cell Broadband Engine internal memory controller + on platform without a hypervisor + +config EDAC_PPC4XX + tristate "PPC4xx IBM DDR2 Memory Controller" + depends on 4xx + help + This enables support for EDAC on the ECC memory used + with the IBM DDR2 memory controller found in various + PowerPC 4xx embedded processors such as the 405EX[r], + 440SP, 440SPe, 460EX, 460GT and 460SX. + +config EDAC_AMD8131 + tristate "AMD8131 HyperTransport PCI-X Tunnel" + depends on PCI && PPC_MAPLE + help + Support for error detection and correction on the + AMD8131 HyperTransport PCI-X Tunnel chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. + +config EDAC_AMD8111 + tristate "AMD8111 HyperTransport I/O Hub" + depends on PCI && PPC_MAPLE + help + Support for error detection and correction on the + AMD8111 HyperTransport I/O Hub chip. + Note, add more Kconfig dependency if it's adopted + on some machine other than Maple. + +config EDAC_CPC925 + tristate "IBM CPC925 Memory Controller (PPC970FX)" + depends on PPC64 + help + Support for error detection and correction on the + IBM CPC925 Bridge and Memory Controller, which is + a companion chip to the PowerPC 970 family of + processors. + +config EDAC_HIGHBANK_MC + tristate "Highbank Memory Controller" + depends on ARCH_HIGHBANK + help + Support for error detection and correction on the + Calxeda Highbank memory controller. + +config EDAC_HIGHBANK_L2 + tristate "Highbank L2 Cache" + depends on ARCH_HIGHBANK + help + Support for error detection and correction on the + Calxeda Highbank memory controller. + +config EDAC_OCTEON_PC + tristate "Cavium Octeon Primary Caches" + depends on CPU_CAVIUM_OCTEON + help + Support for error detection and correction on the primary caches of + the cnMIPS cores of Cavium Octeon family SOCs. + +config EDAC_OCTEON_L2C + tristate "Cavium Octeon Secondary Caches (L2C)" + depends on CAVIUM_OCTEON_SOC + help + Support for error detection and correction on the + Cavium Octeon family of SOCs. + +config EDAC_OCTEON_LMC + tristate "Cavium Octeon DRAM Memory Controller (LMC)" + depends on CAVIUM_OCTEON_SOC + help + Support for error detection and correction on the + Cavium Octeon family of SOCs. + +config EDAC_OCTEON_PCI + tristate "Cavium Octeon PCI Controller" + depends on PCI && CAVIUM_OCTEON_SOC + help + Support for error detection and correction on the + Cavium Octeon family of SOCs. + +config EDAC_THUNDERX + tristate "Cavium ThunderX EDAC" + depends on ARM64 + depends on PCI + help + Support for error detection and correction on the + Cavium ThunderX memory controllers (LMC), Cache + Coherent Processor Interconnect (CCPI) and L2 cache + blocks (TAD, CBC, MCI). + +config EDAC_ALTERA + bool "Altera SOCFPGA ECC" + depends on EDAC=y && ARCH_INTEL_SOCFPGA + help + Support for error detection and correction on the + Altera SOCs. This is the global enable for the + various Altera peripherals. + +config EDAC_ALTERA_SDRAM + bool "Altera SDRAM ECC" + depends on EDAC_ALTERA=y + help + Support for error detection and correction on the + Altera SDRAM Memory for Altera SoCs. Note that the + preloader must initialize the SDRAM before loading + the kernel. + +config EDAC_ALTERA_L2C + bool "Altera L2 Cache ECC" + depends on EDAC_ALTERA=y && CACHE_L2X0 + help + Support for error detection and correction on the + Altera L2 cache Memory for Altera SoCs. This option + requires L2 cache. + +config EDAC_ALTERA_OCRAM + bool "Altera On-Chip RAM ECC" + depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR + help + Support for error detection and correction on the + Altera On-Chip RAM Memory for Altera SoCs. + +config EDAC_ALTERA_ETHERNET + bool "Altera Ethernet FIFO ECC" + depends on EDAC_ALTERA=y + help + Support for error detection and correction on the + Altera Ethernet FIFO Memory for Altera SoCs. + +config EDAC_ALTERA_NAND + bool "Altera NAND FIFO ECC" + depends on EDAC_ALTERA=y && MTD_NAND_DENALI + help + Support for error detection and correction on the + Altera NAND FIFO Memory for Altera SoCs. + +config EDAC_ALTERA_DMA + bool "Altera DMA FIFO ECC" + depends on EDAC_ALTERA=y && PL330_DMA=y + help + Support for error detection and correction on the + Altera DMA FIFO Memory for Altera SoCs. + +config EDAC_ALTERA_USB + bool "Altera USB FIFO ECC" + depends on EDAC_ALTERA=y && USB_DWC2 + help + Support for error detection and correction on the + Altera USB FIFO Memory for Altera SoCs. + +config EDAC_ALTERA_QSPI + bool "Altera QSPI FIFO ECC" + depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI + help + Support for error detection and correction on the + Altera QSPI FIFO Memory for Altera SoCs. + +config EDAC_ALTERA_SDMMC + bool "Altera SDMMC FIFO ECC" + depends on EDAC_ALTERA=y && MMC_DW + help + Support for error detection and correction on the + Altera SDMMC FIFO Memory for Altera SoCs. + +config EDAC_SIFIVE + bool "Sifive platform EDAC driver" + depends on EDAC=y && SIFIVE_CCACHE + help + Support for error detection and correction on the SiFive SoCs. + +config EDAC_ARMADA_XP + bool "Marvell Armada XP DDR and L2 Cache ECC" + depends on MACH_MVEBU_V7 + help + Support for error correction and detection on the Marvell Aramada XP + DDR RAM and L2 cache controllers. + +config EDAC_SYNOPSYS + tristate "Synopsys DDR Memory Controller" + depends on ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || ARCH_MXC + help + Support for error detection and correction on the Synopsys DDR + memory controller. + +config EDAC_XGENE + tristate "APM X-Gene SoC" + depends on (ARM64 || COMPILE_TEST) + help + Support for error detection and correction on the + APM X-Gene family of SOCs. + +config EDAC_TI + tristate "Texas Instruments DDR3 ECC Controller" + depends on ARCH_KEYSTONE || SOC_DRA7XX + help + Support for error detection and correction on the TI SoCs. + +config EDAC_QCOM + tristate "QCOM EDAC Controller" + depends on ARCH_QCOM && QCOM_LLCC + help + Support for error detection and correction on the + Qualcomm Technologies, Inc. SoCs. + + This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). + As of now, it supports error reporting for Last Level Cache Controller (LLCC) + of Tag RAM and Data RAM. + + For debugging issues having to do with stability and overall system + health, you should probably say 'Y' here. + +config EDAC_ASPEED + tristate "Aspeed AST BMC SoC" + depends on ARCH_ASPEED + help + Support for error detection and correction on the Aspeed AST BMC SoC. + + First, ECC must be configured in the bootloader. Then, this driver + will expose error counters via the EDAC kernel framework. + +config EDAC_BLUEFIELD + tristate "Mellanox BlueField Memory ECC" + depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST) + help + Support for error detection and correction on the + Mellanox BlueField SoCs. + +config EDAC_DMC520 + tristate "ARM DMC-520 ECC" + depends on ARM64 + help + Support for error detection and correction on the + SoCs with ARM DMC-520 DRAM controller. + +endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile new file mode 100644 index 000000000..2d1641a27 --- /dev/null +++ b/drivers/edac/Makefile @@ -0,0 +1,86 @@ +# +# Makefile for the Linux kernel EDAC drivers. +# +# Copyright 02 Jul 2003, Linux Networx (http://lnxi.com) +# This file may be distributed under the terms of the +# GNU General Public License. +# + +obj-$(CONFIG_EDAC) := edac_core.o + +edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o +edac_core-y += edac_module.o edac_device_sysfs.o wq.o + +edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o + +ifdef CONFIG_PCI +edac_core-y += edac_pci.o edac_pci_sysfs.o +endif + +obj-$(CONFIG_EDAC_GHES) += ghes_edac.o + +edac_mce_amd-y := mce_amd.o +obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o + +obj-$(CONFIG_EDAC_AL_MC) += al_mc_edac.o +obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o +obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o +obj-$(CONFIG_EDAC_I5000) += i5000_edac.o +obj-$(CONFIG_EDAC_I5100) += i5100_edac.o +obj-$(CONFIG_EDAC_I5400) += i5400_edac.o +obj-$(CONFIG_EDAC_I7300) += i7300_edac.o +obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o +obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o +obj-$(CONFIG_EDAC_PND2) += pnd2_edac.o +obj-$(CONFIG_EDAC_IGEN6) += igen6_edac.o +obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o +obj-$(CONFIG_EDAC_E752X) += e752x_edac.o +obj-$(CONFIG_EDAC_I82443BXGX) += i82443bxgx_edac.o +obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o +obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o +obj-$(CONFIG_EDAC_I3000) += i3000_edac.o +obj-$(CONFIG_EDAC_I3200) += i3200_edac.o +obj-$(CONFIG_EDAC_IE31200) += ie31200_edac.o +obj-$(CONFIG_EDAC_X38) += x38_edac.o +obj-$(CONFIG_EDAC_I82860) += i82860_edac.o +obj-$(CONFIG_EDAC_R82600) += r82600_edac.o +obj-$(CONFIG_EDAC_AMD64) += amd64_edac.o + +obj-$(CONFIG_EDAC_PASEMI) += pasemi_edac.o + +mpc85xx_edac_mod-y := fsl_ddr_edac.o mpc85xx_edac.o +obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o + +layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o +obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o + +skx_edac-y := skx_common.o skx_base.o +obj-$(CONFIG_EDAC_SKX) += skx_edac.o + +i10nm_edac-y := skx_common.o i10nm_base.o +obj-$(CONFIG_EDAC_I10NM) += i10nm_edac.o + +obj-$(CONFIG_EDAC_CELL) += cell_edac.o +obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o +obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o +obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o + +obj-$(CONFIG_EDAC_HIGHBANK_MC) += highbank_mc_edac.o +obj-$(CONFIG_EDAC_HIGHBANK_L2) += highbank_l2_edac.o + +obj-$(CONFIG_EDAC_OCTEON_PC) += octeon_edac-pc.o +obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o +obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o +obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o +obj-$(CONFIG_EDAC_THUNDERX) += thunderx_edac.o + +obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o +obj-$(CONFIG_EDAC_SIFIVE) += sifive_edac.o +obj-$(CONFIG_EDAC_ARMADA_XP) += armada_xp_edac.o +obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o +obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o +obj-$(CONFIG_EDAC_TI) += ti_edac.o +obj-$(CONFIG_EDAC_QCOM) += qcom_edac.o +obj-$(CONFIG_EDAC_ASPEED) += aspeed_edac.o +obj-$(CONFIG_EDAC_BLUEFIELD) += bluefield_edac.o +obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o diff --git a/drivers/edac/al_mc_edac.c b/drivers/edac/al_mc_edac.c new file mode 100644 index 000000000..178b9e581 --- /dev/null +++ b/drivers/edac/al_mc_edac.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + */ +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/edac.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include "edac_module.h" + +/* Registers Offset */ +#define AL_MC_ECC_CFG 0x70 +#define AL_MC_ECC_CLEAR 0x7c +#define AL_MC_ECC_ERR_COUNT 0x80 +#define AL_MC_ECC_CE_ADDR0 0x84 +#define AL_MC_ECC_CE_ADDR1 0x88 +#define AL_MC_ECC_UE_ADDR0 0xa4 +#define AL_MC_ECC_UE_ADDR1 0xa8 +#define AL_MC_ECC_CE_SYND0 0x8c +#define AL_MC_ECC_CE_SYND1 0x90 +#define AL_MC_ECC_CE_SYND2 0x94 +#define AL_MC_ECC_UE_SYND0 0xac +#define AL_MC_ECC_UE_SYND1 0xb0 +#define AL_MC_ECC_UE_SYND2 0xb4 + +/* Registers Fields */ +#define AL_MC_ECC_CFG_SCRUB_DISABLED BIT(4) + +#define AL_MC_ECC_CLEAR_UE_COUNT BIT(3) +#define AL_MC_ECC_CLEAR_CE_COUNT BIT(2) +#define AL_MC_ECC_CLEAR_UE_ERR BIT(1) +#define AL_MC_ECC_CLEAR_CE_ERR BIT(0) + +#define AL_MC_ECC_ERR_COUNT_UE GENMASK(31, 16) +#define AL_MC_ECC_ERR_COUNT_CE GENMASK(15, 0) + +#define AL_MC_ECC_CE_ADDR0_RANK GENMASK(25, 24) +#define AL_MC_ECC_CE_ADDR0_ROW GENMASK(17, 0) + +#define AL_MC_ECC_CE_ADDR1_BG GENMASK(25, 24) +#define AL_MC_ECC_CE_ADDR1_BANK GENMASK(18, 16) +#define AL_MC_ECC_CE_ADDR1_COLUMN GENMASK(11, 0) + +#define AL_MC_ECC_UE_ADDR0_RANK GENMASK(25, 24) +#define AL_MC_ECC_UE_ADDR0_ROW GENMASK(17, 0) + +#define AL_MC_ECC_UE_ADDR1_BG GENMASK(25, 24) +#define AL_MC_ECC_UE_ADDR1_BANK GENMASK(18, 16) +#define AL_MC_ECC_UE_ADDR1_COLUMN GENMASK(11, 0) + +#define DRV_NAME "al_mc_edac" +#define AL_MC_EDAC_MSG_MAX 256 + +struct al_mc_edac { + void __iomem *mmio_base; + spinlock_t lock; + int irq_ce; + int irq_ue; +}; + +static void prepare_msg(char *message, size_t buffer_size, + enum hw_event_mc_err_type type, + u8 rank, u32 row, u8 bg, u8 bank, u16 column, + u32 syn0, u32 syn1, u32 syn2) +{ + snprintf(message, buffer_size, + "%s rank=0x%x row=0x%x bg=0x%x bank=0x%x col=0x%x syn0: 0x%x syn1: 0x%x syn2: 0x%x", + type == HW_EVENT_ERR_UNCORRECTED ? "UE" : "CE", + rank, row, bg, bank, column, syn0, syn1, syn2); +} + +static int handle_ce(struct mem_ctl_info *mci) +{ + u32 eccerrcnt, ecccaddr0, ecccaddr1, ecccsyn0, ecccsyn1, ecccsyn2, row; + struct al_mc_edac *al_mc = mci->pvt_info; + char msg[AL_MC_EDAC_MSG_MAX]; + u16 ce_count, column; + unsigned long flags; + u8 rank, bg, bank; + + eccerrcnt = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_ERR_COUNT); + ce_count = FIELD_GET(AL_MC_ECC_ERR_COUNT_CE, eccerrcnt); + if (!ce_count) + return 0; + + ecccaddr0 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_CE_ADDR0); + ecccaddr1 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_CE_ADDR1); + ecccsyn0 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_CE_SYND0); + ecccsyn1 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_CE_SYND1); + ecccsyn2 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_CE_SYND2); + + writel_relaxed(AL_MC_ECC_CLEAR_CE_COUNT | AL_MC_ECC_CLEAR_CE_ERR, + al_mc->mmio_base + AL_MC_ECC_CLEAR); + + dev_dbg(mci->pdev, "eccuaddr0=0x%08x eccuaddr1=0x%08x\n", + ecccaddr0, ecccaddr1); + + rank = FIELD_GET(AL_MC_ECC_CE_ADDR0_RANK, ecccaddr0); + row = FIELD_GET(AL_MC_ECC_CE_ADDR0_ROW, ecccaddr0); + + bg = FIELD_GET(AL_MC_ECC_CE_ADDR1_BG, ecccaddr1); + bank = FIELD_GET(AL_MC_ECC_CE_ADDR1_BANK, ecccaddr1); + column = FIELD_GET(AL_MC_ECC_CE_ADDR1_COLUMN, ecccaddr1); + + prepare_msg(msg, sizeof(msg), HW_EVENT_ERR_CORRECTED, + rank, row, bg, bank, column, + ecccsyn0, ecccsyn1, ecccsyn2); + + spin_lock_irqsave(&al_mc->lock, flags); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + ce_count, 0, 0, 0, 0, 0, -1, mci->ctl_name, msg); + spin_unlock_irqrestore(&al_mc->lock, flags); + + return ce_count; +} + +static int handle_ue(struct mem_ctl_info *mci) +{ + u32 eccerrcnt, eccuaddr0, eccuaddr1, eccusyn0, eccusyn1, eccusyn2, row; + struct al_mc_edac *al_mc = mci->pvt_info; + char msg[AL_MC_EDAC_MSG_MAX]; + u16 ue_count, column; + unsigned long flags; + u8 rank, bg, bank; + + eccerrcnt = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_ERR_COUNT); + ue_count = FIELD_GET(AL_MC_ECC_ERR_COUNT_UE, eccerrcnt); + if (!ue_count) + return 0; + + eccuaddr0 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_UE_ADDR0); + eccuaddr1 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_UE_ADDR1); + eccusyn0 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_UE_SYND0); + eccusyn1 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_UE_SYND1); + eccusyn2 = readl_relaxed(al_mc->mmio_base + AL_MC_ECC_UE_SYND2); + + writel_relaxed(AL_MC_ECC_CLEAR_UE_COUNT | AL_MC_ECC_CLEAR_UE_ERR, + al_mc->mmio_base + AL_MC_ECC_CLEAR); + + dev_dbg(mci->pdev, "eccuaddr0=0x%08x eccuaddr1=0x%08x\n", + eccuaddr0, eccuaddr1); + + rank = FIELD_GET(AL_MC_ECC_UE_ADDR0_RANK, eccuaddr0); + row = FIELD_GET(AL_MC_ECC_UE_ADDR0_ROW, eccuaddr0); + + bg = FIELD_GET(AL_MC_ECC_UE_ADDR1_BG, eccuaddr1); + bank = FIELD_GET(AL_MC_ECC_UE_ADDR1_BANK, eccuaddr1); + column = FIELD_GET(AL_MC_ECC_UE_ADDR1_COLUMN, eccuaddr1); + + prepare_msg(msg, sizeof(msg), HW_EVENT_ERR_UNCORRECTED, + rank, row, bg, bank, column, + eccusyn0, eccusyn1, eccusyn2); + + spin_lock_irqsave(&al_mc->lock, flags); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + ue_count, 0, 0, 0, 0, 0, -1, mci->ctl_name, msg); + spin_unlock_irqrestore(&al_mc->lock, flags); + + return ue_count; +} + +static void al_mc_edac_check(struct mem_ctl_info *mci) +{ + struct al_mc_edac *al_mc = mci->pvt_info; + + if (al_mc->irq_ue <= 0) + handle_ue(mci); + + if (al_mc->irq_ce <= 0) + handle_ce(mci); +} + +static irqreturn_t al_mc_edac_irq_handler_ue(int irq, void *info) +{ + struct platform_device *pdev = info; + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + if (handle_ue(mci)) + return IRQ_HANDLED; + return IRQ_NONE; +} + +static irqreturn_t al_mc_edac_irq_handler_ce(int irq, void *info) +{ + struct platform_device *pdev = info; + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + if (handle_ce(mci)) + return IRQ_HANDLED; + return IRQ_NONE; +} + +static enum scrub_type get_scrub_mode(void __iomem *mmio_base) +{ + u32 ecccfg0; + + ecccfg0 = readl(mmio_base + AL_MC_ECC_CFG); + + if (FIELD_GET(AL_MC_ECC_CFG_SCRUB_DISABLED, ecccfg0)) + return SCRUB_NONE; + else + return SCRUB_HW_SRC; +} + +static void devm_al_mc_edac_free(void *data) +{ + edac_mc_free(data); +} + +static void devm_al_mc_edac_del(void *data) +{ + edac_mc_del_mc(data); +} + +static int al_mc_edac_probe(struct platform_device *pdev) +{ + struct edac_mc_layer layers[1]; + struct mem_ctl_info *mci; + struct al_mc_edac *al_mc; + void __iomem *mmio_base; + struct dimm_info *dimm; + int ret; + + mmio_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(mmio_base)) { + dev_err(&pdev->dev, "failed to ioremap memory (%ld)\n", + PTR_ERR(mmio_base)); + return PTR_ERR(mmio_base); + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct al_mc_edac)); + if (!mci) + return -ENOMEM; + + ret = devm_add_action_or_reset(&pdev->dev, devm_al_mc_edac_free, mci); + if (ret) + return ret; + + platform_set_drvdata(pdev, mci); + al_mc = mci->pvt_info; + + al_mc->mmio_base = mmio_base; + + al_mc->irq_ue = of_irq_get_byname(pdev->dev.of_node, "ue"); + if (al_mc->irq_ue <= 0) + dev_dbg(&pdev->dev, + "no IRQ defined for UE - falling back to polling\n"); + + al_mc->irq_ce = of_irq_get_byname(pdev->dev.of_node, "ce"); + if (al_mc->irq_ce <= 0) + dev_dbg(&pdev->dev, + "no IRQ defined for CE - falling back to polling\n"); + + /* + * In case both interrupts (ue/ce) are to be found, use interrupt mode. + * In case none of the interrupt are foud, use polling mode. + * In case only one interrupt is found, use interrupt mode for it but + * keep polling mode enable for the other. + */ + if (al_mc->irq_ue <= 0 || al_mc->irq_ce <= 0) { + edac_op_state = EDAC_OPSTATE_POLL; + mci->edac_check = al_mc_edac_check; + } else { + edac_op_state = EDAC_OPSTATE_INT; + } + + spin_lock_init(&al_mc->lock); + + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = DRV_NAME; + mci->ctl_name = "al_mc"; + mci->pdev = &pdev->dev; + mci->scrub_mode = get_scrub_mode(mmio_base); + + dimm = *mci->dimms; + dimm->grain = 1; + + ret = edac_mc_add_mc(mci); + if (ret < 0) { + dev_err(&pdev->dev, + "fail to add memory controller device (%d)\n", + ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, devm_al_mc_edac_del, &pdev->dev); + if (ret) + return ret; + + if (al_mc->irq_ue > 0) { + ret = devm_request_irq(&pdev->dev, + al_mc->irq_ue, + al_mc_edac_irq_handler_ue, + IRQF_SHARED, + pdev->name, + pdev); + if (ret != 0) { + dev_err(&pdev->dev, + "failed to request UE IRQ %d (%d)\n", + al_mc->irq_ue, ret); + return ret; + } + } + + if (al_mc->irq_ce > 0) { + ret = devm_request_irq(&pdev->dev, + al_mc->irq_ce, + al_mc_edac_irq_handler_ce, + IRQF_SHARED, + pdev->name, + pdev); + if (ret != 0) { + dev_err(&pdev->dev, + "failed to request CE IRQ %d (%d)\n", + al_mc->irq_ce, ret); + return ret; + } + } + + return 0; +} + +static const struct of_device_id al_mc_edac_of_match[] = { + { .compatible = "amazon,al-mc-edac", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, al_mc_edac_of_match); + +static struct platform_driver al_mc_edac_driver = { + .probe = al_mc_edac_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = al_mc_edac_of_match, + }, +}; + +module_platform_driver(al_mc_edac_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Talel Shenhar"); +MODULE_DESCRIPTION("Amazon's Annapurna Lab's Memory Controller EDAC Driver"); diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c new file mode 100644 index 000000000..e7e8e624a --- /dev/null +++ b/drivers/edac/altera_edac.c @@ -0,0 +1,2231 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017-2018, Intel Corporation. All rights reserved + * Copyright Altera Corporation (C) 2014-2016. All rights reserved. + * Copyright 2011-2012 Calxeda, Inc. + */ + +#include <asm/cacheflush.h> +#include <linux/ctype.h> +#include <linux/delay.h> +#include <linux/edac.h> +#include <linux/firmware/intel/stratix10-smc.h> +#include <linux/genalloc.h> +#include <linux/interrupt.h> +#include <linux/irqchip/chained_irq.h> +#include <linux/kernel.h> +#include <linux/mfd/altera-sysmgr.h> +#include <linux/mfd/syscon.h> +#include <linux/notifier.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/panic_notifier.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/types.h> +#include <linux/uaccess.h> + +#include "altera_edac.h" +#include "edac_module.h" + +#define EDAC_MOD_STR "altera_edac" +#define EDAC_DEVICE "Altera" + +#ifdef CONFIG_EDAC_ALTERA_SDRAM +static const struct altr_sdram_prv_data c5_data = { + .ecc_ctrl_offset = CV_CTLCFG_OFST, + .ecc_ctl_en_mask = CV_CTLCFG_ECC_AUTO_EN, + .ecc_stat_offset = CV_DRAMSTS_OFST, + .ecc_stat_ce_mask = CV_DRAMSTS_SBEERR, + .ecc_stat_ue_mask = CV_DRAMSTS_DBEERR, + .ecc_saddr_offset = CV_ERRADDR_OFST, + .ecc_daddr_offset = CV_ERRADDR_OFST, + .ecc_cecnt_offset = CV_SBECOUNT_OFST, + .ecc_uecnt_offset = CV_DBECOUNT_OFST, + .ecc_irq_en_offset = CV_DRAMINTR_OFST, + .ecc_irq_en_mask = CV_DRAMINTR_INTREN, + .ecc_irq_clr_offset = CV_DRAMINTR_OFST, + .ecc_irq_clr_mask = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN), + .ecc_cnt_rst_offset = CV_DRAMINTR_OFST, + .ecc_cnt_rst_mask = CV_DRAMINTR_INTRCLR, + .ce_ue_trgr_offset = CV_CTLCFG_OFST, + .ce_set_mask = CV_CTLCFG_GEN_SB_ERR, + .ue_set_mask = CV_CTLCFG_GEN_DB_ERR, +}; + +static const struct altr_sdram_prv_data a10_data = { + .ecc_ctrl_offset = A10_ECCCTRL1_OFST, + .ecc_ctl_en_mask = A10_ECCCTRL1_ECC_EN, + .ecc_stat_offset = A10_INTSTAT_OFST, + .ecc_stat_ce_mask = A10_INTSTAT_SBEERR, + .ecc_stat_ue_mask = A10_INTSTAT_DBEERR, + .ecc_saddr_offset = A10_SERRADDR_OFST, + .ecc_daddr_offset = A10_DERRADDR_OFST, + .ecc_irq_en_offset = A10_ERRINTEN_OFST, + .ecc_irq_en_mask = A10_ECC_IRQ_EN_MASK, + .ecc_irq_clr_offset = A10_INTSTAT_OFST, + .ecc_irq_clr_mask = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR), + .ecc_cnt_rst_offset = A10_ECCCTRL1_OFST, + .ecc_cnt_rst_mask = A10_ECC_CNT_RESET_MASK, + .ce_ue_trgr_offset = A10_DIAGINTTEST_OFST, + .ce_set_mask = A10_DIAGINT_TSERRA_MASK, + .ue_set_mask = A10_DIAGINT_TDERRA_MASK, +}; + +/*********************** EDAC Memory Controller Functions ****************/ + +/* The SDRAM controller uses the EDAC Memory Controller framework. */ + +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct altr_sdram_mc_data *drvdata = mci->pvt_info; + const struct altr_sdram_prv_data *priv = drvdata->data; + u32 status, err_count = 1, err_addr; + + regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status); + + if (status & priv->ecc_stat_ue_mask) { + regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset, + &err_addr); + if (priv->ecc_uecnt_offset) + regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset, + &err_count); + panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n", + err_count, err_addr); + } + if (status & priv->ecc_stat_ce_mask) { + regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset, + &err_addr); + if (priv->ecc_uecnt_offset) + regmap_read(drvdata->mc_vbase, priv->ecc_cecnt_offset, + &err_count); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, 0, + 0, 0, -1, mci->ctl_name, ""); + /* Clear IRQ to resume */ + regmap_write(drvdata->mc_vbase, priv->ecc_irq_clr_offset, + priv->ecc_irq_clr_mask); + + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static ssize_t altr_sdr_mc_err_inject_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct mem_ctl_info *mci = file->private_data; + struct altr_sdram_mc_data *drvdata = mci->pvt_info; + const struct altr_sdram_prv_data *priv = drvdata->data; + u32 *ptemp; + dma_addr_t dma_handle; + u32 reg, read_reg; + + ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL); + if (!ptemp) { + dma_free_coherent(mci->pdev, 16, ptemp, dma_handle); + edac_printk(KERN_ERR, EDAC_MC, + "Inject: Buffer Allocation error\n"); + return -ENOMEM; + } + + regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset, + &read_reg); + read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask); + + /* Error are injected by writing a word while the SBE or DBE + * bit in the CTLCFG register is set. Reading the word will + * trigger the SBE or DBE error and the corresponding IRQ. + */ + if (count == 3) { + edac_printk(KERN_ALERT, EDAC_MC, + "Inject Double bit error\n"); + local_irq_disable(); + regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset, + (read_reg | priv->ue_set_mask)); + local_irq_enable(); + } else { + edac_printk(KERN_ALERT, EDAC_MC, + "Inject Single bit error\n"); + local_irq_disable(); + regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset, + (read_reg | priv->ce_set_mask)); + local_irq_enable(); + } + + ptemp[0] = 0x5A5A5A5A; + ptemp[1] = 0xA5A5A5A5; + + /* Clear the error injection bits */ + regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset, read_reg); + /* Ensure it has been written out */ + wmb(); + + /* + * To trigger the error, we need to read the data back + * (the data was written with errors above). + * The READ_ONCE macros and printk are used to prevent the + * the compiler optimizing these reads out. + */ + reg = READ_ONCE(ptemp[0]); + read_reg = READ_ONCE(ptemp[1]); + /* Force Read */ + rmb(); + + edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n", + reg, read_reg); + + dma_free_coherent(mci->pdev, 16, ptemp, dma_handle); + + return count; +} + +static const struct file_operations altr_sdr_mc_debug_inject_fops = { + .open = simple_open, + .write = altr_sdr_mc_err_inject_write, + .llseek = generic_file_llseek, +}; + +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci) +{ + if (!IS_ENABLED(CONFIG_EDAC_DEBUG)) + return; + + if (!mci->debugfs) + return; + + edac_debugfs_create_file("altr_trigger", S_IWUSR, mci->debugfs, mci, + &altr_sdr_mc_debug_inject_fops); +} + +/* Get total memory size from Open Firmware DTB */ +static unsigned long get_total_mem(void) +{ + struct device_node *np = NULL; + struct resource res; + int ret; + unsigned long total_mem = 0; + + for_each_node_by_type(np, "memory") { + ret = of_address_to_resource(np, 0, &res); + if (ret) + continue; + + total_mem += resource_size(&res); + } + edac_dbg(0, "total_mem 0x%lx\n", total_mem); + return total_mem; +} + +static const struct of_device_id altr_sdram_ctrl_of_match[] = { + { .compatible = "altr,sdram-edac", .data = &c5_data}, + { .compatible = "altr,sdram-edac-a10", .data = &a10_data}, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match); + +static int a10_init(struct regmap *mc_vbase) +{ + if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST, + A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error setting SB IRQ mode\n"); + return -ENODEV; + } + + if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error setting trigger count\n"); + return -ENODEV; + } + + return 0; +} + +static int a10_unmask_irq(struct platform_device *pdev, u32 mask) +{ + void __iomem *sm_base; + int ret = 0; + + if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32), + dev_name(&pdev->dev))) { + edac_printk(KERN_ERR, EDAC_MC, + "Unable to request mem region\n"); + return -EBUSY; + } + + sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32)); + if (!sm_base) { + edac_printk(KERN_ERR, EDAC_MC, + "Unable to ioremap device\n"); + + ret = -ENOMEM; + goto release; + } + + iowrite32(mask, sm_base); + + iounmap(sm_base); + +release: + release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32)); + + return ret; +} + +static int altr_sdram_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct altr_sdram_mc_data *drvdata; + const struct altr_sdram_prv_data *priv; + struct regmap *mc_vbase; + struct dimm_info *dimm; + u32 read_reg; + int irq, irq2, res = 0; + unsigned long mem_size, irqflags = 0; + + id = of_match_device(altr_sdram_ctrl_of_match, &pdev->dev); + if (!id) + return -ENODEV; + + /* Grab the register range from the sdr controller in device tree */ + mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "altr,sdr-syscon"); + if (IS_ERR(mc_vbase)) { + edac_printk(KERN_ERR, EDAC_MC, + "regmap for altr,sdr-syscon lookup failed.\n"); + return -ENODEV; + } + + /* Check specific dependencies for the module */ + priv = of_match_node(altr_sdram_ctrl_of_match, + pdev->dev.of_node)->data; + + /* Validate the SDRAM controller has ECC enabled */ + if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) || + ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) { + edac_printk(KERN_ERR, EDAC_MC, + "No ECC/ECC disabled [0x%08X]\n", read_reg); + return -ENODEV; + } + + /* Grab memory size from device tree. */ + mem_size = get_total_mem(); + if (!mem_size) { + edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n"); + return -ENODEV; + } + + /* Ensure the SDRAM Interrupt is disabled */ + if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset, + priv->ecc_irq_en_mask, 0)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error disabling SDRAM ECC IRQ\n"); + return -ENODEV; + } + + /* Toggle to clear the SDRAM Error count */ + if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset, + priv->ecc_cnt_rst_mask, + priv->ecc_cnt_rst_mask)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error clearing SDRAM ECC count\n"); + return -ENODEV; + } + + if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset, + priv->ecc_cnt_rst_mask, 0)) { + edac_printk(KERN_ERR, EDAC_MC, + "Error clearing SDRAM ECC count\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + edac_printk(KERN_ERR, EDAC_MC, + "No irq %d in DT\n", irq); + return irq; + } + + /* Arria10 has a 2nd IRQ */ + irq2 = platform_get_irq(pdev, 1); + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct altr_sdram_mc_data)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + drvdata = mci->pvt_info; + drvdata->mc_vbase = mc_vbase; + drvdata->data = priv; + platform_set_drvdata(pdev, mci); + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) { + edac_printk(KERN_ERR, EDAC_MC, + "Unable to get managed device resource\n"); + res = -ENOMEM; + goto free; + } + + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_SW_SRC; + mci->dev_name = dev_name(&pdev->dev); + + dimm = *mci->dimms; + dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1; + dimm->grain = 8; + dimm->dtype = DEV_X8; + dimm->mtype = MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + + res = edac_mc_add_mc(mci); + if (res < 0) + goto err; + + /* Only the Arria10 has separate IRQs */ + if (of_machine_is_compatible("altr,socfpga-arria10")) { + /* Arria10 specific initialization */ + res = a10_init(mc_vbase); + if (res < 0) + goto err2; + + res = devm_request_irq(&pdev->dev, irq2, + altr_sdram_mc_err_handler, + IRQF_SHARED, dev_name(&pdev->dev), mci); + if (res < 0) { + edac_mc_printk(mci, KERN_ERR, + "Unable to request irq %d\n", irq2); + res = -ENODEV; + goto err2; + } + + res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK); + if (res < 0) + goto err2; + + irqflags = IRQF_SHARED; + } + + res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler, + irqflags, dev_name(&pdev->dev), mci); + if (res < 0) { + edac_mc_printk(mci, KERN_ERR, + "Unable to request irq %d\n", irq); + res = -ENODEV; + goto err2; + } + + /* Infrastructure ready - enable the IRQ */ + if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset, + priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) { + edac_mc_printk(mci, KERN_ERR, + "Error enabling SDRAM ECC IRQ\n"); + res = -ENODEV; + goto err2; + } + + altr_sdr_mc_create_debugfs_nodes(mci); + + devres_close_group(&pdev->dev, NULL); + + return 0; + +err2: + edac_mc_del_mc(&pdev->dev); +err: + devres_release_group(&pdev->dev, NULL); +free: + edac_mc_free(mci); + edac_printk(KERN_ERR, EDAC_MC, + "EDAC Probe Failed; Error %d\n", res); + + return res; +} + +static int altr_sdram_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* + * If you want to suspend, need to disable EDAC by removing it + * from the device tree or defconfig. + */ +#ifdef CONFIG_PM +static int altr_sdram_prepare(struct device *dev) +{ + pr_err("Suspend not allowed when EDAC is enabled.\n"); + + return -EPERM; +} + +static const struct dev_pm_ops altr_sdram_pm_ops = { + .prepare = altr_sdram_prepare, +}; +#endif + +static struct platform_driver altr_sdram_edac_driver = { + .probe = altr_sdram_probe, + .remove = altr_sdram_remove, + .driver = { + .name = "altr_sdram_edac", +#ifdef CONFIG_PM + .pm = &altr_sdram_pm_ops, +#endif + .of_match_table = altr_sdram_ctrl_of_match, + }, +}; + +module_platform_driver(altr_sdram_edac_driver); + +#endif /* CONFIG_EDAC_ALTERA_SDRAM */ + +/************************* EDAC Parent Probe *************************/ + +static const struct of_device_id altr_edac_device_of_match[]; + +static const struct of_device_id altr_edac_of_match[] = { + { .compatible = "altr,socfpga-ecc-manager" }, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_of_match); + +static int altr_edac_probe(struct platform_device *pdev) +{ + of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match, + NULL, &pdev->dev); + return 0; +} + +static struct platform_driver altr_edac_driver = { + .probe = altr_edac_probe, + .driver = { + .name = "socfpga_ecc_manager", + .of_match_table = altr_edac_of_match, + }, +}; +module_platform_driver(altr_edac_driver); + +/************************* EDAC Device Functions *************************/ + +/* + * EDAC Device Functions (shared between various IPs). + * The discrete memories use the EDAC Device framework. The probe + * and error handling functions are very similar between memories + * so they are shared. The memory allocation and freeing for EDAC + * trigger testing are different for each memory. + */ + +#ifdef CONFIG_EDAC_ALTERA_OCRAM +static const struct edac_device_prv_data ocramecc_data; +#endif +#ifdef CONFIG_EDAC_ALTERA_L2C +static const struct edac_device_prv_data l2ecc_data; +#endif +#ifdef CONFIG_EDAC_ALTERA_OCRAM +static const struct edac_device_prv_data a10_ocramecc_data; +#endif +#ifdef CONFIG_EDAC_ALTERA_L2C +static const struct edac_device_prv_data a10_l2ecc_data; +#endif + +static irqreturn_t altr_edac_device_handler(int irq, void *dev_id) +{ + irqreturn_t ret_value = IRQ_NONE; + struct edac_device_ctl_info *dci = dev_id; + struct altr_edac_device_dev *drvdata = dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + + if (irq == drvdata->sb_irq) { + if (priv->ce_clear_mask) + writel(priv->ce_clear_mask, drvdata->base); + edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name); + ret_value = IRQ_HANDLED; + } else if (irq == drvdata->db_irq) { + if (priv->ue_clear_mask) + writel(priv->ue_clear_mask, drvdata->base); + edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name); + panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n"); + ret_value = IRQ_HANDLED; + } else { + WARN_ON(1); + } + + return ret_value; +} + +static ssize_t __maybe_unused +altr_edac_device_trig(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) + +{ + u32 *ptemp, i, error_mask; + int result = 0; + u8 trig_type; + unsigned long flags; + struct edac_device_ctl_info *edac_dci = file->private_data; + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + void *generic_ptr = edac_dci->dev; + + if (!user_buf || get_user(trig_type, user_buf)) + return -EFAULT; + + if (!priv->alloc_mem) + return -ENOMEM; + + /* + * Note that generic_ptr is initialized to the device * but in + * some alloc_functions, this is overridden and returns data. + */ + ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr); + if (!ptemp) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Inject: Buffer Allocation error\n"); + return -ENOMEM; + } + + if (trig_type == ALTR_UE_TRIGGER_CHAR) + error_mask = priv->ue_set_mask; + else + error_mask = priv->ce_set_mask; + + edac_printk(KERN_ALERT, EDAC_DEVICE, + "Trigger Error Mask (0x%X)\n", error_mask); + + local_irq_save(flags); + /* write ECC corrupted data out. */ + for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) { + /* Read data so we're in the correct state */ + rmb(); + if (READ_ONCE(ptemp[i])) + result = -1; + /* Toggle Error bit (it is latched), leave ECC enabled */ + writel(error_mask, (drvdata->base + priv->set_err_ofst)); + writel(priv->ecc_enable_mask, (drvdata->base + + priv->set_err_ofst)); + ptemp[i] = i; + } + /* Ensure it has been written out */ + wmb(); + local_irq_restore(flags); + + if (result) + edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n"); + + /* Read out written data. ECC error caused here */ + for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++) + if (READ_ONCE(ptemp[i]) != i) + edac_printk(KERN_ERR, EDAC_DEVICE, + "Read doesn't match written data\n"); + + if (priv->free_mem) + priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr); + + return count; +} + +static const struct file_operations altr_edac_device_inject_fops __maybe_unused = { + .open = simple_open, + .write = altr_edac_device_trig, + .llseek = generic_file_llseek, +}; + +static ssize_t __maybe_unused +altr_edac_a10_device_trig(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos); + +static const struct file_operations altr_edac_a10_device_inject_fops __maybe_unused = { + .open = simple_open, + .write = altr_edac_a10_device_trig, + .llseek = generic_file_llseek, +}; + +static ssize_t __maybe_unused +altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos); + +static const struct file_operations altr_edac_a10_device_inject2_fops __maybe_unused = { + .open = simple_open, + .write = altr_edac_a10_device_trig2, + .llseek = generic_file_llseek, +}; + +static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci, + const struct edac_device_prv_data *priv) +{ + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + + if (!IS_ENABLED(CONFIG_EDAC_DEBUG)) + return; + + drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name); + if (!drvdata->debugfs_dir) + return; + + if (!edac_debugfs_create_file("altr_trigger", S_IWUSR, + drvdata->debugfs_dir, edac_dci, + priv->inject_fops)) + debugfs_remove_recursive(drvdata->debugfs_dir); +} + +static const struct of_device_id altr_edac_device_of_match[] = { +#ifdef CONFIG_EDAC_ALTERA_L2C + { .compatible = "altr,socfpga-l2-ecc", .data = &l2ecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_OCRAM + { .compatible = "altr,socfpga-ocram-ecc", .data = &ocramecc_data }, +#endif + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_device_of_match); + +/* + * altr_edac_device_probe() + * This is a generic EDAC device driver that will support + * various Altera memory devices such as the L2 cache ECC and + * OCRAM ECC as well as the memories for other peripherals. + * Module specific initialization is done by passing the + * function index in the device tree. + */ +static int altr_edac_device_probe(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci; + struct altr_edac_device_dev *drvdata; + struct resource *r; + int res = 0; + struct device_node *np = pdev->dev.of_node; + char *ecc_name = (char *)np->name; + static int dev_instance; + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to open devm\n"); + return -ENOMEM; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to get mem resource\n"); + res = -ENODEV; + goto fail; + } + + if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r), + dev_name(&pdev->dev))) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error requesting mem region\n", ecc_name); + res = -EBUSY; + goto fail; + } + + dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name, + 1, ecc_name, 1, 0, NULL, 0, + dev_instance++); + + if (!dci) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: Unable to allocate EDAC device\n", ecc_name); + res = -ENOMEM; + goto fail; + } + + drvdata = dci->pvt_info; + dci->dev = &pdev->dev; + platform_set_drvdata(pdev, dci); + drvdata->edac_dev_name = ecc_name; + + drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!drvdata->base) { + res = -ENOMEM; + goto fail1; + } + + /* Get driver specific data for this EDAC device */ + drvdata->data = of_match_node(altr_edac_device_of_match, np)->data; + + /* Check specific dependencies for the module */ + if (drvdata->data->setup) { + res = drvdata->data->setup(drvdata); + if (res) + goto fail1; + } + + drvdata->sb_irq = platform_get_irq(pdev, 0); + res = devm_request_irq(&pdev->dev, drvdata->sb_irq, + altr_edac_device_handler, + 0, dev_name(&pdev->dev), dci); + if (res) + goto fail1; + + drvdata->db_irq = platform_get_irq(pdev, 1); + res = devm_request_irq(&pdev->dev, drvdata->db_irq, + altr_edac_device_handler, + 0, dev_name(&pdev->dev), dci); + if (res) + goto fail1; + + dci->mod_name = "Altera ECC Manager"; + dci->dev_name = drvdata->edac_dev_name; + + res = edac_device_add_device(dci); + if (res) + goto fail1; + + altr_create_edacdev_dbgfs(dci, drvdata->data); + + devres_close_group(&pdev->dev, NULL); + + return 0; + +fail1: + edac_device_free_ctl_info(dci); +fail: + devres_release_group(&pdev->dev, NULL); + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error setting up EDAC device: %d\n", ecc_name, res); + + return res; +} + +static int altr_edac_device_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); + struct altr_edac_device_dev *drvdata = dci->pvt_info; + + debugfs_remove_recursive(drvdata->debugfs_dir); + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + + return 0; +} + +static struct platform_driver altr_edac_device_driver = { + .probe = altr_edac_device_probe, + .remove = altr_edac_device_remove, + .driver = { + .name = "altr_edac_device", + .of_match_table = altr_edac_device_of_match, + }, +}; +module_platform_driver(altr_edac_device_driver); + +/******************* Arria10 Device ECC Shared Functions *****************/ + +/* + * Test for memory's ECC dependencies upon entry because platform specific + * startup should have initialized the memory and enabled the ECC. + * Can't turn on ECC here because accessing un-initialized memory will + * cause CE/UE errors possibly causing an ABORT. + */ +static int __maybe_unused +altr_check_ecc_deps(struct altr_edac_device_dev *device) +{ + void __iomem *base = device->base; + const struct edac_device_prv_data *prv = device->data; + + if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask) + return 0; + + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: No ECC present or ECC disabled.\n", + device->edac_dev_name); + return -ENODEV; +} + +static irqreturn_t __maybe_unused altr_edac_a10_ecc_irq(int irq, void *dev_id) +{ + struct altr_edac_device_dev *dci = dev_id; + void __iomem *base = dci->base; + + if (irq == dci->sb_irq) { + writel(ALTR_A10_ECC_SERRPENA, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name); + + return IRQ_HANDLED; + } else if (irq == dci->db_irq) { + writel(ALTR_A10_ECC_DERRPENA, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name); + if (dci->data->panic) + panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n"); + + return IRQ_HANDLED; + } + + WARN_ON(1); + + return IRQ_NONE; +} + +/******************* Arria10 Memory Buffer Functions *********************/ + +static inline int a10_get_irq_mask(struct device_node *np) +{ + int irq; + const u32 *handle = of_get_property(np, "interrupts", NULL); + + if (!handle) + return -ENODEV; + irq = be32_to_cpup(handle); + return irq; +} + +static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + value |= bit_mask; + writel(value, ioaddr); +} + +static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + value &= ~bit_mask; + writel(value, ioaddr); +} + +static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr) +{ + u32 value = readl(ioaddr); + + return (value & bit_mask) ? 1 : 0; +} + +/* + * This function uses the memory initialization block in the Arria10 ECC + * controller to initialize/clear the entire memory data and ECC data. + */ +static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port) +{ + int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US; + u32 init_mask, stat_mask, clear_mask; + int ret = 0; + + if (port) { + init_mask = ALTR_A10_ECC_INITB; + stat_mask = ALTR_A10_ECC_INITCOMPLETEB; + clear_mask = ALTR_A10_ECC_ERRPENB_MASK; + } else { + init_mask = ALTR_A10_ECC_INITA; + stat_mask = ALTR_A10_ECC_INITCOMPLETEA; + clear_mask = ALTR_A10_ECC_ERRPENA_MASK; + } + + ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST)); + while (limit--) { + if (ecc_test_bits(stat_mask, + (ioaddr + ALTR_A10_ECC_INITSTAT_OFST))) + break; + udelay(1); + } + if (limit < 0) + ret = -EBUSY; + + /* Clear any pending ECC interrupts */ + writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST)); + + return ret; +} + +static __init int __maybe_unused +altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask, + u32 ecc_ctrl_en_mask, bool dual_port) +{ + int ret = 0; + void __iomem *ecc_block_base; + struct regmap *ecc_mgr_map; + char *ecc_name; + struct device_node *np_eccmgr; + + ecc_name = (char *)np->name; + + /* Get the ECC Manager - parent of the device EDACs */ + np_eccmgr = of_get_parent(np); + + ecc_mgr_map = + altr_sysmgr_regmap_lookup_by_phandle(np_eccmgr, + "altr,sysmgr-syscon"); + + of_node_put(np_eccmgr); + if (IS_ERR(ecc_mgr_map)) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to get syscon altr,sysmgr-syscon\n"); + return -ENODEV; + } + + /* Map the ECC Block */ + ecc_block_base = of_iomap(np, 0); + if (!ecc_block_base) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to map %s ECC block\n", ecc_name); + return -ENODEV; + } + + /* Disable ECC */ + regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask); + writel(ALTR_A10_ECC_SERRINTEN, + (ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST)); + ecc_clear_bits(ecc_ctrl_en_mask, + (ecc_block_base + ALTR_A10_ECC_CTRL_OFST)); + /* Ensure all writes complete */ + wmb(); + /* Use HW initialization block to initialize memory for ECC */ + ret = altr_init_memory_port(ecc_block_base, 0); + if (ret) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "ECC: cannot init %s PORTA memory\n", ecc_name); + goto out; + } + + if (dual_port) { + ret = altr_init_memory_port(ecc_block_base, 1); + if (ret) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "ECC: cannot init %s PORTB memory\n", + ecc_name); + goto out; + } + } + + /* Interrupt mode set to every SBERR */ + regmap_write(ecc_mgr_map, ALTR_A10_ECC_INTMODE_OFST, + ALTR_A10_ECC_INTMODE); + /* Enable ECC */ + ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base + + ALTR_A10_ECC_CTRL_OFST)); + writel(ALTR_A10_ECC_SERRINTEN, + (ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST)); + regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask); + /* Ensure all writes complete */ + wmb(); +out: + iounmap(ecc_block_base); + return ret; +} + +static int validate_parent_available(struct device_node *np); +static const struct of_device_id altr_edac_a10_device_of_match[]; +static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat) +{ + int irq; + struct device_node *child, *np; + + np = of_find_compatible_node(NULL, NULL, + "altr,socfpga-a10-ecc-manager"); + if (!np) { + edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n"); + return -ENODEV; + } + + for_each_child_of_node(np, child) { + const struct of_device_id *pdev_id; + const struct edac_device_prv_data *prv; + + if (!of_device_is_available(child)) + continue; + if (!of_device_is_compatible(child, compat)) + continue; + + if (validate_parent_available(child)) + continue; + + irq = a10_get_irq_mask(child); + if (irq < 0) + continue; + + /* Get matching node and check for valid result */ + pdev_id = of_match_node(altr_edac_a10_device_of_match, child); + if (IS_ERR_OR_NULL(pdev_id)) + continue; + + /* Validate private data pointer before dereferencing */ + prv = pdev_id->data; + if (!prv) + continue; + + altr_init_a10_ecc_block(child, BIT(irq), + prv->ecc_enable_mask, 0); + } + + of_node_put(np); + return 0; +} + +/*********************** SDRAM EDAC Device Functions *********************/ + +#ifdef CONFIG_EDAC_ALTERA_SDRAM + +/* + * A legacy U-Boot bug only enabled memory mapped access to the ECC Enable + * register if ECC is enabled. Linux checks the ECC Enable register to + * determine ECC status. + * Use an SMC call (which always works) to determine ECC enablement. + */ +static int altr_s10_sdram_check_ecc_deps(struct altr_edac_device_dev *device) +{ + const struct edac_device_prv_data *prv = device->data; + unsigned long sdram_ecc_addr; + struct arm_smccc_res result; + struct device_node *np; + phys_addr_t sdram_addr; + u32 read_reg; + int ret; + + np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl"); + if (!np) + goto sdram_err; + + sdram_addr = of_translate_address(np, of_get_address(np, 0, + NULL, NULL)); + of_node_put(np); + sdram_ecc_addr = (unsigned long)sdram_addr + prv->ecc_en_ofst; + arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sdram_ecc_addr, + 0, 0, 0, 0, 0, 0, &result); + read_reg = (unsigned int)result.a1; + ret = (int)result.a0; + if (!ret && (read_reg & prv->ecc_enable_mask)) + return 0; + +sdram_err: + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: No ECC present or ECC disabled.\n", + device->edac_dev_name); + return -ENODEV; +} + +static const struct edac_device_prv_data s10_sdramecc_data = { + .setup = altr_s10_sdram_check_ecc_deps, + .ce_clear_mask = ALTR_S10_ECC_SERRPENA, + .ue_clear_mask = ALTR_S10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_S10_ECC_EN, + .ecc_en_ofst = ALTR_S10_ECC_CTRL_SDRAM_OFST, + .ce_set_mask = ALTR_S10_ECC_TSERRA, + .ue_set_mask = ALTR_S10_ECC_TDERRA, + .set_err_ofst = ALTR_S10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; +#endif /* CONFIG_EDAC_ALTERA_SDRAM */ + +/*********************** OCRAM EDAC Device Functions *********************/ + +#ifdef CONFIG_EDAC_ALTERA_OCRAM + +static void *ocram_alloc_mem(size_t size, void **other) +{ + struct device_node *np; + struct gen_pool *gp; + void *sram_addr; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc"); + if (!np) + return NULL; + + gp = of_gen_pool_get(np, "iram", 0); + of_node_put(np); + if (!gp) + return NULL; + + sram_addr = (void *)gen_pool_alloc(gp, size); + if (!sram_addr) + return NULL; + + memset(sram_addr, 0, size); + /* Ensure data is written out */ + wmb(); + + /* Remember this handle for freeing later */ + *other = gp; + + return sram_addr; +} + +static void ocram_free_mem(void *p, size_t size, void *other) +{ + gen_pool_free((struct gen_pool *)other, (unsigned long)p, size); +} + +static const struct edac_device_prv_data ocramecc_data = { + .setup = altr_check_ecc_deps, + .ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR), + .ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR), + .alloc_mem = ocram_alloc_mem, + .free_mem = ocram_free_mem, + .ecc_enable_mask = ALTR_OCR_ECC_EN, + .ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET, + .ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS), + .ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD), + .set_err_ofst = ALTR_OCR_ECC_REG_OFFSET, + .trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE, + .inject_fops = &altr_edac_device_inject_fops, +}; + +static int __maybe_unused +altr_check_ocram_deps_init(struct altr_edac_device_dev *device) +{ + void __iomem *base = device->base; + int ret; + + ret = altr_check_ecc_deps(device); + if (ret) + return ret; + + /* Verify OCRAM has been initialized */ + if (!ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA, + (base + ALTR_A10_ECC_INITSTAT_OFST))) + return -ENODEV; + + /* Enable IRQ on Single Bit Error */ + writel(ALTR_A10_ECC_SERRINTEN, (base + ALTR_A10_ECC_ERRINTENS_OFST)); + /* Ensure all writes complete */ + wmb(); + + return 0; +} + +static const struct edac_device_prv_data a10_ocramecc_data = { + .setup = altr_check_ocram_deps_init, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM, + .ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject2_fops, + /* + * OCRAM panic on uncorrectable error because sleep/resume + * functions and FPGA contents are stored in OCRAM. Prefer + * a kernel panic over executing/loading corrupted data. + */ + .panic = true, +}; + +#endif /* CONFIG_EDAC_ALTERA_OCRAM */ + +/********************* L2 Cache EDAC Device Functions ********************/ + +#ifdef CONFIG_EDAC_ALTERA_L2C + +static void *l2_alloc_mem(size_t size, void **other) +{ + struct device *dev = *other; + void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL); + + if (!ptemp) + return NULL; + + /* Make sure everything is written out */ + wmb(); + + /* + * Clean all cache levels up to LoC (includes L2) + * This ensures the corrupted data is written into + * L2 cache for readback test (which causes ECC error). + */ + flush_cache_all(); + + return ptemp; +} + +static void l2_free_mem(void *p, size_t size, void *other) +{ + struct device *dev = other; + + if (dev && p) + devm_kfree(dev, p); +} + +/* + * altr_l2_check_deps() + * Test for L2 cache ECC dependencies upon entry because + * platform specific startup should have initialized the L2 + * memory and enabled the ECC. + * Bail if ECC is not enabled. + * Note that L2 Cache Enable is forced at build time. + */ +static int altr_l2_check_deps(struct altr_edac_device_dev *device) +{ + void __iomem *base = device->base; + const struct edac_device_prv_data *prv = device->data; + + if ((readl(base) & prv->ecc_enable_mask) == + prv->ecc_enable_mask) + return 0; + + edac_printk(KERN_ERR, EDAC_DEVICE, + "L2: No ECC present, or ECC disabled\n"); + return -ENODEV; +} + +static irqreturn_t altr_edac_a10_l2_irq(int irq, void *dev_id) +{ + struct altr_edac_device_dev *dci = dev_id; + + if (irq == dci->sb_irq) { + regmap_write(dci->edac->ecc_mgr_map, + A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST, + A10_SYSGMR_MPU_CLEAR_L2_ECC_SB); + edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name); + + return IRQ_HANDLED; + } else if (irq == dci->db_irq) { + regmap_write(dci->edac->ecc_mgr_map, + A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST, + A10_SYSGMR_MPU_CLEAR_L2_ECC_MB); + edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name); + panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n"); + + return IRQ_HANDLED; + } + + WARN_ON(1); + + return IRQ_NONE; +} + +static const struct edac_device_prv_data l2ecc_data = { + .setup = altr_l2_check_deps, + .ce_clear_mask = 0, + .ue_clear_mask = 0, + .alloc_mem = l2_alloc_mem, + .free_mem = l2_free_mem, + .ecc_enable_mask = ALTR_L2_ECC_EN, + .ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS), + .ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD), + .set_err_ofst = ALTR_L2_ECC_REG_OFFSET, + .trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE, + .inject_fops = &altr_edac_device_inject_fops, +}; + +static const struct edac_device_prv_data a10_l2ecc_data = { + .setup = altr_l2_check_deps, + .ce_clear_mask = ALTR_A10_L2_ECC_SERR_CLR, + .ue_clear_mask = ALTR_A10_L2_ECC_MERR_CLR, + .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_L2, + .alloc_mem = l2_alloc_mem, + .free_mem = l2_free_mem, + .ecc_enable_mask = ALTR_A10_L2_ECC_EN_CTL, + .ce_set_mask = ALTR_A10_L2_ECC_CE_INJ_MASK, + .ue_set_mask = ALTR_A10_L2_ECC_UE_INJ_MASK, + .set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST, + .ecc_irq_handler = altr_edac_a10_l2_irq, + .trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE, + .inject_fops = &altr_edac_device_inject_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_L2C */ + +/********************* Ethernet Device Functions ********************/ + +#ifdef CONFIG_EDAC_ALTERA_ETHERNET + +static int __init socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev) +{ + int ret; + + ret = altr_init_a10_ecc_device_type("altr,socfpga-eth-mac-ecc"); + if (ret) + return ret; + + return altr_check_ecc_deps(dev); +} + +static const struct edac_device_prv_data a10_enetecc_data = { + .setup = socfpga_init_ethernet_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject2_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_ETHERNET */ + +/********************** NAND Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_NAND + +static int __init socfpga_init_nand_ecc(struct altr_edac_device_dev *device) +{ + int ret; + + ret = altr_init_a10_ecc_device_type("altr,socfpga-nand-ecc"); + if (ret) + return ret; + + return altr_check_ecc_deps(device); +} + +static const struct edac_device_prv_data a10_nandecc_data = { + .setup = socfpga_init_nand_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_NAND */ + +/********************** DMA Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_DMA + +static int __init socfpga_init_dma_ecc(struct altr_edac_device_dev *device) +{ + int ret; + + ret = altr_init_a10_ecc_device_type("altr,socfpga-dma-ecc"); + if (ret) + return ret; + + return altr_check_ecc_deps(device); +} + +static const struct edac_device_prv_data a10_dmaecc_data = { + .setup = socfpga_init_dma_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_DMA */ + +/********************** USB Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_USB + +static int __init socfpga_init_usb_ecc(struct altr_edac_device_dev *device) +{ + int ret; + + ret = altr_init_a10_ecc_device_type("altr,socfpga-usb-ecc"); + if (ret) + return ret; + + return altr_check_ecc_deps(device); +} + +static const struct edac_device_prv_data a10_usbecc_data = { + .setup = socfpga_init_usb_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject2_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_USB */ + +/********************** QSPI Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_QSPI + +static int __init socfpga_init_qspi_ecc(struct altr_edac_device_dev *device) +{ + int ret; + + ret = altr_init_a10_ecc_device_type("altr,socfpga-qspi-ecc"); + if (ret) + return ret; + + return altr_check_ecc_deps(device); +} + +static const struct edac_device_prv_data a10_qspiecc_data = { + .setup = socfpga_init_qspi_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRA, + .ue_set_mask = ALTR_A10_ECC_TDERRA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_QSPI */ + +/********************* SDMMC Device Functions **********************/ + +#ifdef CONFIG_EDAC_ALTERA_SDMMC + +static const struct edac_device_prv_data a10_sdmmceccb_data; +static int altr_portb_setup(struct altr_edac_device_dev *device) +{ + struct edac_device_ctl_info *dci; + struct altr_edac_device_dev *altdev; + char *ecc_name = "sdmmcb-ecc"; + int edac_idx, rc; + struct device_node *np; + const struct edac_device_prv_data *prv = &a10_sdmmceccb_data; + + rc = altr_check_ecc_deps(device); + if (rc) + return rc; + + np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc"); + if (!np) { + edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n"); + return -ENODEV; + } + + /* Create the PortB EDAC device */ + edac_idx = edac_device_alloc_index(); + dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1, + ecc_name, 1, 0, NULL, 0, edac_idx); + if (!dci) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: Unable to allocate PortB EDAC device\n", + ecc_name); + return -ENOMEM; + } + + /* Initialize the PortB EDAC device structure from PortA structure */ + altdev = dci->pvt_info; + *altdev = *device; + + if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL)) + return -ENOMEM; + + /* Update PortB specific values */ + altdev->edac_dev_name = ecc_name; + altdev->edac_idx = edac_idx; + altdev->edac_dev = dci; + altdev->data = prv; + dci->dev = &altdev->ddev; + dci->ctl_name = "Altera ECC Manager"; + dci->mod_name = ecc_name; + dci->dev_name = ecc_name; + + /* + * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly + * + * FIXME: Instead of ifdefs with different architectures the driver + * should properly use compatibles. + */ +#ifdef CONFIG_64BIT + altdev->sb_irq = irq_of_parse_and_map(np, 1); +#else + altdev->sb_irq = irq_of_parse_and_map(np, 2); +#endif + if (!altdev->sb_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n"); + rc = -ENODEV; + goto err_release_group_1; + } + rc = devm_request_irq(&altdev->ddev, altdev->sb_irq, + prv->ecc_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n"); + goto err_release_group_1; + } + +#ifdef CONFIG_64BIT + /* Use IRQ to determine SError origin instead of assigning IRQ */ + rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Error PortB DBIRQ alloc\n"); + goto err_release_group_1; + } +#else + altdev->db_irq = irq_of_parse_and_map(np, 3); + if (!altdev->db_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n"); + rc = -ENODEV; + goto err_release_group_1; + } + rc = devm_request_irq(&altdev->ddev, altdev->db_irq, + prv->ecc_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n"); + goto err_release_group_1; + } +#endif + + rc = edac_device_add_device(dci); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "edac_device_add_device portB failed\n"); + rc = -ENOMEM; + goto err_release_group_1; + } + altr_create_edacdev_dbgfs(dci, prv); + + list_add(&altdev->next, &altdev->edac->a10_ecc_devices); + + devres_remove_group(&altdev->ddev, altr_portb_setup); + + return 0; + +err_release_group_1: + edac_device_free_ctl_info(dci); + devres_release_group(&altdev->ddev, altr_portb_setup); + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error setting up EDAC device: %d\n", ecc_name, rc); + return rc; +} + +static int __init socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device) +{ + int rc = -ENODEV; + struct device_node *child; + + child = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc"); + if (!child) + return -ENODEV; + + if (!of_device_is_available(child)) + goto exit; + + if (validate_parent_available(child)) + goto exit; + + /* Init portB */ + rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK, + a10_sdmmceccb_data.ecc_enable_mask, 1); + if (rc) + goto exit; + + /* Setup portB */ + return altr_portb_setup(device); + +exit: + of_node_put(child); + return rc; +} + +static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id) +{ + struct altr_edac_device_dev *ad = dev_id; + void __iomem *base = ad->base; + const struct edac_device_prv_data *priv = ad->data; + + if (irq == ad->sb_irq) { + writel(priv->ce_clear_mask, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name); + return IRQ_HANDLED; + } else if (irq == ad->db_irq) { + writel(priv->ue_clear_mask, + base + ALTR_A10_ECC_INTSTAT_OFST); + edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name); + return IRQ_HANDLED; + } + + WARN_ONCE(1, "Unhandled IRQ%d on Port B.", irq); + + return IRQ_NONE; +} + +static const struct edac_device_prv_data a10_sdmmcecca_data = { + .setup = socfpga_init_sdmmc_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENA, + .ue_clear_mask = ALTR_A10_ECC_DERRPENA, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_SERRPENA, + .ue_set_mask = ALTR_A10_ECC_DERRPENA, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +static const struct edac_device_prv_data a10_sdmmceccb_data = { + .setup = socfpga_init_sdmmc_ecc, + .ce_clear_mask = ALTR_A10_ECC_SERRPENB, + .ue_clear_mask = ALTR_A10_ECC_DERRPENB, + .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL, + .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST, + .ce_set_mask = ALTR_A10_ECC_TSERRB, + .ue_set_mask = ALTR_A10_ECC_TDERRB, + .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST, + .ecc_irq_handler = altr_edac_a10_ecc_irq_portb, + .inject_fops = &altr_edac_a10_device_inject_fops, +}; + +#endif /* CONFIG_EDAC_ALTERA_SDMMC */ + +/********************* Arria10 EDAC Device Functions *************************/ +static const struct of_device_id altr_edac_a10_device_of_match[] = { +#ifdef CONFIG_EDAC_ALTERA_L2C + { .compatible = "altr,socfpga-a10-l2-ecc", .data = &a10_l2ecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_OCRAM + { .compatible = "altr,socfpga-a10-ocram-ecc", + .data = &a10_ocramecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_ETHERNET + { .compatible = "altr,socfpga-eth-mac-ecc", + .data = &a10_enetecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_NAND + { .compatible = "altr,socfpga-nand-ecc", .data = &a10_nandecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_DMA + { .compatible = "altr,socfpga-dma-ecc", .data = &a10_dmaecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_USB + { .compatible = "altr,socfpga-usb-ecc", .data = &a10_usbecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_QSPI + { .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_SDMMC + { .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data }, +#endif +#ifdef CONFIG_EDAC_ALTERA_SDRAM + { .compatible = "altr,sdram-edac-s10", .data = &s10_sdramecc_data }, +#endif + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match); + +/* + * The Arria10 EDAC Device Functions differ from the Cyclone5/Arria5 + * because 2 IRQs are shared among the all ECC peripherals. The ECC + * manager manages the IRQs and the children. + * Based on xgene_edac.c peripheral code. + */ + +static ssize_t __maybe_unused +altr_edac_a10_device_trig(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct edac_device_ctl_info *edac_dci = file->private_data; + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + void __iomem *set_addr = (drvdata->base + priv->set_err_ofst); + unsigned long flags; + u8 trig_type; + + if (!user_buf || get_user(trig_type, user_buf)) + return -EFAULT; + + local_irq_save(flags); + if (trig_type == ALTR_UE_TRIGGER_CHAR) + writel(priv->ue_set_mask, set_addr); + else + writel(priv->ce_set_mask, set_addr); + + /* Ensure the interrupt test bits are set */ + wmb(); + local_irq_restore(flags); + + return count; +} + +/* + * The Stratix10 EDAC Error Injection Functions differ from Arria10 + * slightly. A few Arria10 peripherals can use this injection function. + * Inject the error into the memory and then readback to trigger the IRQ. + */ +static ssize_t __maybe_unused +altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct edac_device_ctl_info *edac_dci = file->private_data; + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info; + const struct edac_device_prv_data *priv = drvdata->data; + void __iomem *set_addr = (drvdata->base + priv->set_err_ofst); + unsigned long flags; + u8 trig_type; + + if (!user_buf || get_user(trig_type, user_buf)) + return -EFAULT; + + local_irq_save(flags); + if (trig_type == ALTR_UE_TRIGGER_CHAR) { + writel(priv->ue_set_mask, set_addr); + } else { + /* Setup read/write of 4 bytes */ + writel(ECC_WORD_WRITE, drvdata->base + ECC_BLK_DBYTECTRL_OFST); + /* Setup Address to 0 */ + writel(0, drvdata->base + ECC_BLK_ADDRESS_OFST); + /* Setup accctrl to read & ecc & data override */ + writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST); + /* Kick it. */ + writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST); + /* Setup write for single bit change */ + writel(readl(drvdata->base + ECC_BLK_RDATA0_OFST) ^ 0x1, + drvdata->base + ECC_BLK_WDATA0_OFST); + writel(readl(drvdata->base + ECC_BLK_RDATA1_OFST), + drvdata->base + ECC_BLK_WDATA1_OFST); + writel(readl(drvdata->base + ECC_BLK_RDATA2_OFST), + drvdata->base + ECC_BLK_WDATA2_OFST); + writel(readl(drvdata->base + ECC_BLK_RDATA3_OFST), + drvdata->base + ECC_BLK_WDATA3_OFST); + + /* Copy Read ECC to Write ECC */ + writel(readl(drvdata->base + ECC_BLK_RECC0_OFST), + drvdata->base + ECC_BLK_WECC0_OFST); + writel(readl(drvdata->base + ECC_BLK_RECC1_OFST), + drvdata->base + ECC_BLK_WECC1_OFST); + /* Setup accctrl to write & ecc override & data override */ + writel(ECC_WRITE_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST); + /* Kick it. */ + writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST); + /* Setup accctrl to read & ecc overwrite & data overwrite */ + writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST); + /* Kick it. */ + writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST); + } + + /* Ensure the interrupt test bits are set */ + wmb(); + local_irq_restore(flags); + + return count; +} + +static void altr_edac_a10_irq_handler(struct irq_desc *desc) +{ + int dberr, bit, sm_offset, irq_status; + struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc); + struct irq_chip *chip = irq_desc_get_chip(desc); + int irq = irq_desc_get_irq(desc); + unsigned long bits; + + dberr = (irq == edac->db_irq) ? 1 : 0; + sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST : + A10_SYSMGR_ECC_INTSTAT_SERR_OFST; + + chained_irq_enter(chip, desc); + + regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status); + + bits = irq_status; + for_each_set_bit(bit, &bits, 32) + generic_handle_domain_irq(edac->domain, dberr * 32 + bit); + + chained_irq_exit(chip, desc); +} + +static int validate_parent_available(struct device_node *np) +{ + struct device_node *parent; + int ret = 0; + + /* SDRAM must be present for Linux (implied parent) */ + if (of_device_is_compatible(np, "altr,sdram-edac-s10")) + return 0; + + /* Ensure parent device is enabled if parent node exists */ + parent = of_parse_phandle(np, "altr,ecc-parent", 0); + if (parent && !of_device_is_available(parent)) + ret = -ENODEV; + + of_node_put(parent); + return ret; +} + +static int get_s10_sdram_edac_resource(struct device_node *np, + struct resource *res) +{ + struct device_node *parent; + int ret; + + parent = of_parse_phandle(np, "altr,sdr-syscon", 0); + if (!parent) + return -ENODEV; + + ret = of_address_to_resource(parent, 0, res); + of_node_put(parent); + + return ret; +} + +static int altr_edac_a10_device_add(struct altr_arria10_edac *edac, + struct device_node *np) +{ + struct edac_device_ctl_info *dci; + struct altr_edac_device_dev *altdev; + char *ecc_name = (char *)np->name; + struct resource res; + int edac_idx; + int rc = 0; + const struct edac_device_prv_data *prv; + /* Get matching node and check for valid result */ + const struct of_device_id *pdev_id = + of_match_node(altr_edac_a10_device_of_match, np); + if (IS_ERR_OR_NULL(pdev_id)) + return -ENODEV; + + /* Get driver specific data for this EDAC device */ + prv = pdev_id->data; + if (IS_ERR_OR_NULL(prv)) + return -ENODEV; + + if (validate_parent_available(np)) + return -ENODEV; + + if (!devres_open_group(edac->dev, altr_edac_a10_device_add, GFP_KERNEL)) + return -ENOMEM; + + if (of_device_is_compatible(np, "altr,sdram-edac-s10")) + rc = get_s10_sdram_edac_resource(np, &res); + else + rc = of_address_to_resource(np, 0, &res); + + if (rc < 0) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: no resource address\n", ecc_name); + goto err_release_group; + } + + edac_idx = edac_device_alloc_index(); + dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, + 1, ecc_name, 1, 0, NULL, 0, + edac_idx); + + if (!dci) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s: Unable to allocate EDAC device\n", ecc_name); + rc = -ENOMEM; + goto err_release_group; + } + + altdev = dci->pvt_info; + dci->dev = edac->dev; + altdev->edac_dev_name = ecc_name; + altdev->edac_idx = edac_idx; + altdev->edac = edac; + altdev->edac_dev = dci; + altdev->data = prv; + altdev->ddev = *edac->dev; + dci->dev = &altdev->ddev; + dci->ctl_name = "Altera ECC Manager"; + dci->mod_name = ecc_name; + dci->dev_name = ecc_name; + + altdev->base = devm_ioremap_resource(edac->dev, &res); + if (IS_ERR(altdev->base)) { + rc = PTR_ERR(altdev->base); + goto err_release_group1; + } + + /* Check specific dependencies for the module */ + if (altdev->data->setup) { + rc = altdev->data->setup(altdev); + if (rc) + goto err_release_group1; + } + + altdev->sb_irq = irq_of_parse_and_map(np, 0); + if (!altdev->sb_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating SBIRQ\n"); + rc = -ENODEV; + goto err_release_group1; + } + rc = devm_request_irq(edac->dev, altdev->sb_irq, prv->ecc_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "No SBERR IRQ resource\n"); + goto err_release_group1; + } + +#ifdef CONFIG_64BIT + /* Use IRQ to determine SError origin instead of assigning IRQ */ + rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to parse DB IRQ index\n"); + goto err_release_group1; + } +#else + altdev->db_irq = irq_of_parse_and_map(np, 1); + if (!altdev->db_irq) { + edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n"); + rc = -ENODEV; + goto err_release_group1; + } + rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler, + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, + ecc_name, altdev); + if (rc) { + edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n"); + goto err_release_group1; + } +#endif + + rc = edac_device_add_device(dci); + if (rc) { + dev_err(edac->dev, "edac_device_add_device failed\n"); + rc = -ENOMEM; + goto err_release_group1; + } + + altr_create_edacdev_dbgfs(dci, prv); + + list_add(&altdev->next, &edac->a10_ecc_devices); + + devres_remove_group(edac->dev, altr_edac_a10_device_add); + + return 0; + +err_release_group1: + edac_device_free_ctl_info(dci); +err_release_group: + devres_release_group(edac->dev, NULL); + edac_printk(KERN_ERR, EDAC_DEVICE, + "%s:Error setting up EDAC device: %d\n", ecc_name, rc); + + return rc; +} + +static void a10_eccmgr_irq_mask(struct irq_data *d) +{ + struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d); + + regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, + BIT(d->hwirq)); +} + +static void a10_eccmgr_irq_unmask(struct irq_data *d) +{ + struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d); + + regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, + BIT(d->hwirq)); +} + +static int a10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct altr_arria10_edac *edac = d->host_data; + + irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq); + irq_set_chip_data(irq, edac); + irq_set_noprobe(irq); + + return 0; +} + +static const struct irq_domain_ops a10_eccmgr_ic_ops = { + .map = a10_eccmgr_irqdomain_map, + .xlate = irq_domain_xlate_twocell, +}; + +/************** Stratix 10 EDAC Double Bit Error Handler ************/ +#define to_a10edac(p, m) container_of(p, struct altr_arria10_edac, m) + +#ifdef CONFIG_64BIT +/* panic routine issues reboot on non-zero panic_timeout */ +extern int panic_timeout; + +/* + * The double bit error is handled through SError which is fatal. This is + * called as a panic notifier to printout ECC error info as part of the panic. + */ +static int s10_edac_dberr_handler(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct altr_arria10_edac *edac = to_a10edac(this, panic_notifier); + int err_addr, dberror; + + regmap_read(edac->ecc_mgr_map, S10_SYSMGR_ECC_INTSTAT_DERR_OFST, + &dberror); + regmap_write(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST, dberror); + if (dberror & S10_DBE_IRQ_MASK) { + struct list_head *position; + struct altr_edac_device_dev *ed; + struct arm_smccc_res result; + + /* Find the matching DBE in the list of devices */ + list_for_each(position, &edac->a10_ecc_devices) { + ed = list_entry(position, struct altr_edac_device_dev, + next); + if (!(BIT(ed->db_irq) & dberror)) + continue; + + writel(ALTR_A10_ECC_DERRPENA, + ed->base + ALTR_A10_ECC_INTSTAT_OFST); + err_addr = readl(ed->base + ALTR_S10_DERR_ADDRA_OFST); + regmap_write(edac->ecc_mgr_map, + S10_SYSMGR_UE_ADDR_OFST, err_addr); + edac_printk(KERN_ERR, EDAC_DEVICE, + "EDAC: [Fatal DBE on %s @ 0x%08X]\n", + ed->edac_dev_name, err_addr); + break; + } + /* Notify the System through SMC. Reboot delay = 1 second */ + panic_timeout = 1; + arm_smccc_smc(INTEL_SIP_SMC_ECC_DBE, dberror, 0, 0, 0, 0, + 0, 0, &result); + } + + return NOTIFY_DONE; +} +#endif + +/****************** Arria 10 EDAC Probe Function *********************/ +static int altr_edac_a10_probe(struct platform_device *pdev) +{ + struct altr_arria10_edac *edac; + struct device_node *child; + + edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL); + if (!edac) + return -ENOMEM; + + edac->dev = &pdev->dev; + platform_set_drvdata(pdev, edac); + INIT_LIST_HEAD(&edac->a10_ecc_devices); + + edac->ecc_mgr_map = + altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node, + "altr,sysmgr-syscon"); + + if (IS_ERR(edac->ecc_mgr_map)) { + edac_printk(KERN_ERR, EDAC_DEVICE, + "Unable to get syscon altr,sysmgr-syscon\n"); + return PTR_ERR(edac->ecc_mgr_map); + } + + edac->irq_chip.name = pdev->dev.of_node->name; + edac->irq_chip.irq_mask = a10_eccmgr_irq_mask; + edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask; + edac->domain = irq_domain_add_linear(pdev->dev.of_node, 64, + &a10_eccmgr_ic_ops, edac); + if (!edac->domain) { + dev_err(&pdev->dev, "Error adding IRQ domain\n"); + return -ENOMEM; + } + + edac->sb_irq = platform_get_irq(pdev, 0); + if (edac->sb_irq < 0) { + dev_err(&pdev->dev, "No SBERR IRQ resource\n"); + return edac->sb_irq; + } + + irq_set_chained_handler_and_data(edac->sb_irq, + altr_edac_a10_irq_handler, + edac); + +#ifdef CONFIG_64BIT + { + int dberror, err_addr; + + edac->panic_notifier.notifier_call = s10_edac_dberr_handler; + atomic_notifier_chain_register(&panic_notifier_list, + &edac->panic_notifier); + + /* Printout a message if uncorrectable error previously. */ + regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST, + &dberror); + if (dberror) { + regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST, + &err_addr); + edac_printk(KERN_ERR, EDAC_DEVICE, + "Previous Boot UE detected[0x%X] @ 0x%X\n", + dberror, err_addr); + /* Reset the sticky registers */ + regmap_write(edac->ecc_mgr_map, + S10_SYSMGR_UE_VAL_OFST, 0); + regmap_write(edac->ecc_mgr_map, + S10_SYSMGR_UE_ADDR_OFST, 0); + } + } +#else + edac->db_irq = platform_get_irq(pdev, 1); + if (edac->db_irq < 0) { + dev_err(&pdev->dev, "No DBERR IRQ resource\n"); + return edac->db_irq; + } + irq_set_chained_handler_and_data(edac->db_irq, + altr_edac_a10_irq_handler, edac); +#endif + + for_each_child_of_node(pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + + if (of_match_node(altr_edac_a10_device_of_match, child)) + altr_edac_a10_device_add(edac, child); + +#ifdef CONFIG_EDAC_ALTERA_SDRAM + else if (of_device_is_compatible(child, "altr,sdram-edac-a10")) + of_platform_populate(pdev->dev.of_node, + altr_sdram_ctrl_of_match, + NULL, &pdev->dev); +#endif + } + + return 0; +} + +static const struct of_device_id altr_edac_a10_of_match[] = { + { .compatible = "altr,socfpga-a10-ecc-manager" }, + { .compatible = "altr,socfpga-s10-ecc-manager" }, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match); + +static struct platform_driver altr_edac_a10_driver = { + .probe = altr_edac_a10_probe, + .driver = { + .name = "socfpga_a10_ecc_manager", + .of_match_table = altr_edac_a10_of_match, + }, +}; +module_platform_driver(altr_edac_a10_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Thor Thayer"); +MODULE_DESCRIPTION("EDAC Driver for Altera Memories"); diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h new file mode 100644 index 000000000..3727e72c8 --- /dev/null +++ b/drivers/edac/altera_edac.h @@ -0,0 +1,398 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2017-2018, Intel Corporation + * Copyright (C) 2015 Altera Corporation + */ + +#ifndef _ALTERA_EDAC_H +#define _ALTERA_EDAC_H + +#include <linux/arm-smccc.h> +#include <linux/edac.h> +#include <linux/types.h> + +/* SDRAM Controller CtrlCfg Register */ +#define CV_CTLCFG_OFST 0x00 + +/* SDRAM Controller CtrlCfg Register Bit Masks */ +#define CV_CTLCFG_ECC_EN 0x400 +#define CV_CTLCFG_ECC_CORR_EN 0x800 +#define CV_CTLCFG_GEN_SB_ERR 0x2000 +#define CV_CTLCFG_GEN_DB_ERR 0x4000 + +#define CV_CTLCFG_ECC_AUTO_EN (CV_CTLCFG_ECC_EN) + +/* SDRAM Controller Address Width Register */ +#define CV_DRAMADDRW_OFST 0x2C + +/* SDRAM Controller Address Widths Field Register */ +#define DRAMADDRW_COLBIT_MASK 0x001F +#define DRAMADDRW_COLBIT_SHIFT 0 +#define DRAMADDRW_ROWBIT_MASK 0x03E0 +#define DRAMADDRW_ROWBIT_SHIFT 5 +#define CV_DRAMADDRW_BANKBIT_MASK 0x1C00 +#define CV_DRAMADDRW_BANKBIT_SHIFT 10 +#define CV_DRAMADDRW_CSBIT_MASK 0xE000 +#define CV_DRAMADDRW_CSBIT_SHIFT 13 + +/* SDRAM Controller Interface Data Width Register */ +#define CV_DRAMIFWIDTH_OFST 0x30 + +/* SDRAM Controller Interface Data Width Defines */ +#define CV_DRAMIFWIDTH_16B_ECC 24 +#define CV_DRAMIFWIDTH_32B_ECC 40 + +/* SDRAM Controller DRAM Status Register */ +#define CV_DRAMSTS_OFST 0x38 + +/* SDRAM Controller DRAM Status Register Bit Masks */ +#define CV_DRAMSTS_SBEERR 0x04 +#define CV_DRAMSTS_DBEERR 0x08 +#define CV_DRAMSTS_CORR_DROP 0x10 + +/* SDRAM Controller DRAM IRQ Register */ +#define CV_DRAMINTR_OFST 0x3C + +/* SDRAM Controller DRAM IRQ Register Bit Masks */ +#define CV_DRAMINTR_INTREN 0x01 +#define CV_DRAMINTR_SBEMASK 0x02 +#define CV_DRAMINTR_DBEMASK 0x04 +#define CV_DRAMINTR_CORRDROPMASK 0x08 +#define CV_DRAMINTR_INTRCLR 0x10 + +/* SDRAM Controller Single Bit Error Count Register */ +#define CV_SBECOUNT_OFST 0x40 + +/* SDRAM Controller Double Bit Error Count Register */ +#define CV_DBECOUNT_OFST 0x44 + +/* SDRAM Controller ECC Error Address Register */ +#define CV_ERRADDR_OFST 0x48 + +/*-----------------------------------------*/ + +/* SDRAM Controller EccCtrl Register */ +#define A10_ECCCTRL1_OFST 0x00 + +/* SDRAM Controller EccCtrl Register Bit Masks */ +#define A10_ECCCTRL1_ECC_EN 0x001 +#define A10_ECCCTRL1_CNT_RST 0x010 +#define A10_ECCCTRL1_AWB_CNT_RST 0x100 +#define A10_ECC_CNT_RESET_MASK (A10_ECCCTRL1_CNT_RST | \ + A10_ECCCTRL1_AWB_CNT_RST) + +/* SDRAM Controller Address Width Register */ +#define CV_DRAMADDRW 0xFFC2502C +#define A10_DRAMADDRW 0xFFCFA0A8 +#define S10_DRAMADDRW 0xF80110E0 + +/* SDRAM Controller Address Widths Field Register */ +#define DRAMADDRW_COLBIT_MASK 0x001F +#define DRAMADDRW_COLBIT_SHIFT 0 +#define DRAMADDRW_ROWBIT_MASK 0x03E0 +#define DRAMADDRW_ROWBIT_SHIFT 5 +#define CV_DRAMADDRW_BANKBIT_MASK 0x1C00 +#define CV_DRAMADDRW_BANKBIT_SHIFT 10 +#define CV_DRAMADDRW_CSBIT_MASK 0xE000 +#define CV_DRAMADDRW_CSBIT_SHIFT 13 + +#define A10_DRAMADDRW_BANKBIT_MASK 0x3C00 +#define A10_DRAMADDRW_BANKBIT_SHIFT 10 +#define A10_DRAMADDRW_GRPBIT_MASK 0xC000 +#define A10_DRAMADDRW_GRPBIT_SHIFT 14 +#define A10_DRAMADDRW_CSBIT_MASK 0x70000 +#define A10_DRAMADDRW_CSBIT_SHIFT 16 + +/* SDRAM Controller Interface Data Width Register */ +#define CV_DRAMIFWIDTH 0xFFC25030 +#define A10_DRAMIFWIDTH 0xFFCFB008 +#define S10_DRAMIFWIDTH 0xF8011008 + +/* SDRAM Controller Interface Data Width Defines */ +#define CV_DRAMIFWIDTH_16B_ECC 24 +#define CV_DRAMIFWIDTH_32B_ECC 40 + +#define A10_DRAMIFWIDTH_16B 0x0 +#define A10_DRAMIFWIDTH_32B 0x1 +#define A10_DRAMIFWIDTH_64B 0x2 + +/* SDRAM Controller DRAM IRQ Register */ +#define A10_ERRINTEN_OFST 0x10 + +/* SDRAM Controller DRAM IRQ Register Bit Masks */ +#define A10_ERRINTEN_SERRINTEN 0x01 +#define A10_ERRINTEN_DERRINTEN 0x02 +#define A10_ECC_IRQ_EN_MASK (A10_ERRINTEN_SERRINTEN | \ + A10_ERRINTEN_DERRINTEN) + +/* SDRAM Interrupt Mode Register */ +#define A10_INTMODE_OFST 0x1C +#define A10_INTMODE_SB_INT 1 + +/* SDRAM Controller Error Status Register */ +#define A10_INTSTAT_OFST 0x20 + +/* SDRAM Controller Error Status Register Bit Masks */ +#define A10_INTSTAT_SBEERR 0x01 +#define A10_INTSTAT_DBEERR 0x02 + +/* SDRAM Controller ECC Error Address Register */ +#define A10_DERRADDR_OFST 0x2C +#define A10_SERRADDR_OFST 0x30 + +/* SDRAM Controller ECC Diagnostic Register */ +#define A10_DIAGINTTEST_OFST 0x24 + +#define A10_DIAGINT_TSERRA_MASK 0x0001 +#define A10_DIAGINT_TDERRA_MASK 0x0100 + +#define A10_SBERR_IRQ 34 +#define A10_DBERR_IRQ 32 + +/* SDRAM Single Bit Error Count Compare Set Register */ +#define A10_SERRCNTREG_OFST 0x3C + +#define A10_SYMAN_INTMASK_CLR 0xFFD06098 +#define A10_INTMASK_CLR_OFST 0x10 +#define A10_DDR0_IRQ_MASK BIT(17) + +struct altr_sdram_prv_data { + int ecc_ctrl_offset; + int ecc_ctl_en_mask; + int ecc_cecnt_offset; + int ecc_uecnt_offset; + int ecc_stat_offset; + int ecc_stat_ce_mask; + int ecc_stat_ue_mask; + int ecc_saddr_offset; + int ecc_daddr_offset; + int ecc_irq_en_offset; + int ecc_irq_en_mask; + int ecc_irq_clr_offset; + int ecc_irq_clr_mask; + int ecc_cnt_rst_offset; + int ecc_cnt_rst_mask; + struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr; + int ecc_enable_mask; + int ce_set_mask; + int ue_set_mask; + int ce_ue_trgr_offset; +}; + +/* Altera SDRAM Memory Controller data */ +struct altr_sdram_mc_data { + struct regmap *mc_vbase; + int sb_irq; + int db_irq; + const struct altr_sdram_prv_data *data; +}; + +/************************** EDAC Device Defines **************************/ +/***** General Device Trigger Defines *****/ +#define ALTR_UE_TRIGGER_CHAR 'U' /* Trigger for UE */ +#define ALTR_TRIGGER_READ_WRD_CNT 32 /* Line size x 4 */ +#define ALTR_TRIG_OCRAM_BYTE_SIZE 128 /* Line size x 4 */ +#define ALTR_TRIG_L2C_BYTE_SIZE 4096 /* Full Page */ + +/******* Cyclone5 and Arria5 Defines *******/ +/* OCRAM ECC Management Group Defines */ +#define ALTR_MAN_GRP_OCRAM_ECC_OFFSET 0x04 +#define ALTR_OCR_ECC_REG_OFFSET 0x00 +#define ALTR_OCR_ECC_EN BIT(0) +#define ALTR_OCR_ECC_INJS BIT(1) +#define ALTR_OCR_ECC_INJD BIT(2) +#define ALTR_OCR_ECC_SERR BIT(3) +#define ALTR_OCR_ECC_DERR BIT(4) + +/* L2 ECC Management Group Defines */ +#define ALTR_MAN_GRP_L2_ECC_OFFSET 0x00 +#define ALTR_L2_ECC_REG_OFFSET 0x00 +#define ALTR_L2_ECC_EN BIT(0) +#define ALTR_L2_ECC_INJS BIT(1) +#define ALTR_L2_ECC_INJD BIT(2) + +/* Arria10 General ECC Block Module Defines */ +#define ALTR_A10_ECC_CTRL_OFST 0x08 +#define ALTR_A10_ECC_EN BIT(0) +#define ALTR_A10_ECC_INITA BIT(16) +#define ALTR_A10_ECC_INITB BIT(24) + +#define ALTR_A10_ECC_INITSTAT_OFST 0x0C +#define ALTR_A10_ECC_INITCOMPLETEA BIT(0) +#define ALTR_A10_ECC_INITCOMPLETEB BIT(8) + +#define ALTR_A10_ECC_ERRINTEN_OFST 0x10 +#define ALTR_A10_ECC_ERRINTENS_OFST 0x14 +#define ALTR_A10_ECC_ERRINTENR_OFST 0x18 +#define ALTR_A10_ECC_SERRINTEN BIT(0) + +#define ALTR_A10_ECC_INTMODE_OFST 0x1C +#define ALTR_A10_ECC_INTMODE BIT(0) + +#define ALTR_A10_ECC_INTSTAT_OFST 0x20 +#define ALTR_A10_ECC_SERRPENA BIT(0) +#define ALTR_A10_ECC_DERRPENA BIT(8) +#define ALTR_A10_ECC_ERRPENA_MASK (ALTR_A10_ECC_SERRPENA | \ + ALTR_A10_ECC_DERRPENA) +#define ALTR_A10_ECC_SERRPENB BIT(16) +#define ALTR_A10_ECC_DERRPENB BIT(24) +#define ALTR_A10_ECC_ERRPENB_MASK (ALTR_A10_ECC_SERRPENB | \ + ALTR_A10_ECC_DERRPENB) + +#define ALTR_A10_ECC_INTTEST_OFST 0x24 +#define ALTR_A10_ECC_TSERRA BIT(0) +#define ALTR_A10_ECC_TDERRA BIT(8) +#define ALTR_A10_ECC_TSERRB BIT(16) +#define ALTR_A10_ECC_TDERRB BIT(24) + +/* ECC Manager Defines */ +#define A10_SYSMGR_ECC_INTMASK_SET_OFST 0x94 +#define A10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98 +#define A10_SYSMGR_ECC_INTMASK_OCRAM BIT(1) + +#define A10_SYSMGR_ECC_INTSTAT_SERR_OFST 0x9C +#define A10_SYSMGR_ECC_INTSTAT_DERR_OFST 0xA0 +#define A10_SYSMGR_ECC_INTSTAT_L2 BIT(0) +#define A10_SYSMGR_ECC_INTSTAT_OCRAM BIT(1) + +#define A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST 0xA8 +#define A10_SYSGMR_MPU_CLEAR_L2_ECC_SB BIT(15) +#define A10_SYSGMR_MPU_CLEAR_L2_ECC_MB BIT(31) + +/* Arria 10 L2 ECC Management Group Defines */ +#define ALTR_A10_L2_ECC_CTL_OFST 0x0 +#define ALTR_A10_L2_ECC_EN_CTL BIT(0) + +#define ALTR_A10_L2_ECC_STATUS 0xFFD060A4 +#define ALTR_A10_L2_ECC_STAT_OFST 0xA4 +#define ALTR_A10_L2_ECC_SERR_PEND BIT(0) +#define ALTR_A10_L2_ECC_MERR_PEND BIT(0) + +#define ALTR_A10_L2_ECC_CLR_OFST 0x4 +#define ALTR_A10_L2_ECC_SERR_CLR BIT(15) +#define ALTR_A10_L2_ECC_MERR_CLR BIT(31) + +#define ALTR_A10_L2_ECC_INJ_OFST ALTR_A10_L2_ECC_CTL_OFST +#define ALTR_A10_L2_ECC_CE_INJ_MASK 0x00000101 +#define ALTR_A10_L2_ECC_UE_INJ_MASK 0x00010101 + +/* Arria 10 OCRAM ECC Management Group Defines */ +#define ALTR_A10_OCRAM_ECC_EN_CTL (BIT(1) | BIT(0)) + +/* Arria 10 Ethernet ECC Management Group Defines */ +#define ALTR_A10_COMMON_ECC_EN_CTL BIT(0) + +/* Arria 10 SDMMC ECC Management Group Defines */ +#define ALTR_A10_SDMMC_IRQ_MASK (BIT(16) | BIT(15)) + +/* A10 ECC Controller memory initialization timeout */ +#define ALTR_A10_ECC_INIT_WATCHDOG_10US 10000 + +/************* Stratix10 Defines **************/ +#define ALTR_S10_ECC_CTRL_SDRAM_OFST 0x00 +#define ALTR_S10_ECC_EN BIT(0) + +#define ALTR_S10_ECC_ERRINTEN_OFST 0x10 +#define ALTR_S10_ECC_ERRINTENS_OFST 0x14 +#define ALTR_S10_ECC_ERRINTENR_OFST 0x18 +#define ALTR_S10_ECC_SERRINTEN BIT(0) + +#define ALTR_S10_ECC_INTMODE_OFST 0x1C +#define ALTR_S10_ECC_INTMODE BIT(0) + +#define ALTR_S10_ECC_INTSTAT_OFST 0x20 +#define ALTR_S10_ECC_SERRPENA BIT(0) +#define ALTR_S10_ECC_DERRPENA BIT(8) +#define ALTR_S10_ECC_ERRPENA_MASK (ALTR_S10_ECC_SERRPENA | \ + ALTR_S10_ECC_DERRPENA) + +#define ALTR_S10_ECC_INTTEST_OFST 0x24 +#define ALTR_S10_ECC_TSERRA BIT(0) +#define ALTR_S10_ECC_TDERRA BIT(8) +#define ALTR_S10_ECC_TSERRB BIT(16) +#define ALTR_S10_ECC_TDERRB BIT(24) + +#define ALTR_S10_DERR_ADDRA_OFST 0x2C + +/* Stratix10 ECC Manager Defines */ +#define S10_SYSMGR_ECC_INTMASK_CLR_OFST 0x98 +#define S10_SYSMGR_ECC_INTSTAT_DERR_OFST 0xA0 + +/* Sticky registers for Uncorrected Errors */ +#define S10_SYSMGR_UE_VAL_OFST 0x220 +#define S10_SYSMGR_UE_ADDR_OFST 0x224 + +#define S10_DDR0_IRQ_MASK BIT(16) +#define S10_DBE_IRQ_MASK 0x3FFFE + +/* Define ECC Block Offsets for peripherals */ +#define ECC_BLK_ADDRESS_OFST 0x40 +#define ECC_BLK_RDATA0_OFST 0x44 +#define ECC_BLK_RDATA1_OFST 0x48 +#define ECC_BLK_RDATA2_OFST 0x4C +#define ECC_BLK_RDATA3_OFST 0x50 +#define ECC_BLK_WDATA0_OFST 0x54 +#define ECC_BLK_WDATA1_OFST 0x58 +#define ECC_BLK_WDATA2_OFST 0x5C +#define ECC_BLK_WDATA3_OFST 0x60 +#define ECC_BLK_RECC0_OFST 0x64 +#define ECC_BLK_RECC1_OFST 0x68 +#define ECC_BLK_WECC0_OFST 0x6C +#define ECC_BLK_WECC1_OFST 0x70 +#define ECC_BLK_DBYTECTRL_OFST 0x74 +#define ECC_BLK_ACCCTRL_OFST 0x78 +#define ECC_BLK_STARTACC_OFST 0x7C + +#define ECC_XACT_KICK 0x10000 +#define ECC_WORD_WRITE 0xFF +#define ECC_WRITE_DOVR 0x101 +#define ECC_WRITE_EDOVR 0x103 +#define ECC_READ_EOVR 0x2 +#define ECC_READ_EDOVR 0x3 + +struct altr_edac_device_dev; + +struct edac_device_prv_data { + int (*setup)(struct altr_edac_device_dev *device); + int ce_clear_mask; + int ue_clear_mask; + int irq_status_mask; + void * (*alloc_mem)(size_t size, void **other); + void (*free_mem)(void *p, size_t size, void *other); + int ecc_enable_mask; + int ecc_en_ofst; + int ce_set_mask; + int ue_set_mask; + int set_err_ofst; + irqreturn_t (*ecc_irq_handler)(int irq, void *dev_id); + int trig_alloc_sz; + const struct file_operations *inject_fops; + bool panic; +}; + +struct altr_edac_device_dev { + struct list_head next; + void __iomem *base; + int sb_irq; + int db_irq; + const struct edac_device_prv_data *data; + struct dentry *debugfs_dir; + char *edac_dev_name; + struct altr_arria10_edac *edac; + struct edac_device_ctl_info *edac_dev; + struct device ddev; + int edac_idx; +}; + +struct altr_arria10_edac { + struct device *dev; + struct regmap *ecc_mgr_map; + int sb_irq; + int db_irq; + struct irq_domain *domain; + struct irq_chip irq_chip; + struct list_head a10_ecc_devices; + struct notifier_block panic_notifier; +}; + +#endif /* #ifndef _ALTERA_EDAC_H */ diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c new file mode 100644 index 000000000..2f854feee --- /dev/null +++ b/drivers/edac/amd64_edac.c @@ -0,0 +1,4433 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "amd64_edac.h" +#include <asm/amd_nb.h> + +static struct edac_pci_ctl_info *pci_ctl; + +/* + * Set by command line parameter. If BIOS has enabled the ECC, this override is + * cleared to prevent re-enabling the hardware by this driver. + */ +static int ecc_enable_override; +module_param(ecc_enable_override, int, 0644); + +static struct msr __percpu *msrs; + +static struct amd64_family_type *fam_type; + +static inline u32 get_umc_reg(u32 reg) +{ + if (!fam_type->flags.zn_regs_v2) + return reg; + + switch (reg) { + case UMCCH_ADDR_CFG: return UMCCH_ADDR_CFG_DDR5; + case UMCCH_ADDR_MASK_SEC: return UMCCH_ADDR_MASK_SEC_DDR5; + case UMCCH_DIMM_CFG: return UMCCH_DIMM_CFG_DDR5; + } + + WARN_ONCE(1, "%s: unknown register 0x%x", __func__, reg); + return 0; +} + +/* Per-node stuff */ +static struct ecc_settings **ecc_stngs; + +/* Device for the PCI component */ +static struct device *pci_ctl_dev; + +/* + * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing + * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching- + * or higher value'. + * + *FIXME: Produce a better mapping/linearisation. + */ +static const struct scrubrate { + u32 scrubval; /* bit pattern for scrub rate */ + u32 bandwidth; /* bandwidth consumed (bytes/sec) */ +} scrubrates[] = { + { 0x01, 1600000000UL}, + { 0x02, 800000000UL}, + { 0x03, 400000000UL}, + { 0x04, 200000000UL}, + { 0x05, 100000000UL}, + { 0x06, 50000000UL}, + { 0x07, 25000000UL}, + { 0x08, 12284069UL}, + { 0x09, 6274509UL}, + { 0x0A, 3121951UL}, + { 0x0B, 1560975UL}, + { 0x0C, 781440UL}, + { 0x0D, 390720UL}, + { 0x0E, 195300UL}, + { 0x0F, 97650UL}, + { 0x10, 48854UL}, + { 0x11, 24427UL}, + { 0x12, 12213UL}, + { 0x13, 6101UL}, + { 0x14, 3051UL}, + { 0x15, 1523UL}, + { 0x16, 761UL}, + { 0x00, 0UL}, /* scrubbing off */ +}; + +int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 *val, const char *func) +{ + int err = 0; + + err = pci_read_config_dword(pdev, offset, val); + if (err) + amd64_warn("%s: error reading F%dx%03x.\n", + func, PCI_FUNC(pdev->devfn), offset); + + return err; +} + +int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 val, const char *func) +{ + int err = 0; + + err = pci_write_config_dword(pdev, offset, val); + if (err) + amd64_warn("%s: error writing to F%dx%03x.\n", + func, PCI_FUNC(pdev->devfn), offset); + + return err; +} + +/* + * Select DCT to which PCI cfg accesses are routed + */ +static void f15h_select_dct(struct amd64_pvt *pvt, u8 dct) +{ + u32 reg = 0; + + amd64_read_pci_cfg(pvt->F1, DCT_CFG_SEL, ®); + reg &= (pvt->model == 0x30) ? ~3 : ~1; + reg |= dct; + amd64_write_pci_cfg(pvt->F1, DCT_CFG_SEL, reg); +} + +/* + * + * Depending on the family, F2 DCT reads need special handling: + * + * K8: has a single DCT only and no address offsets >= 0x100 + * + * F10h: each DCT has its own set of regs + * DCT0 -> F2x040.. + * DCT1 -> F2x140.. + * + * F16h: has only 1 DCT + * + * F15h: we select which DCT we access using F1x10C[DctCfgSel] + */ +static inline int amd64_read_dct_pci_cfg(struct amd64_pvt *pvt, u8 dct, + int offset, u32 *val) +{ + switch (pvt->fam) { + case 0xf: + if (dct || offset >= 0x100) + return -EINVAL; + break; + + case 0x10: + if (dct) { + /* + * Note: If ganging is enabled, barring the regs + * F2x[1,0]98 and F2x[1,0]9C; reads reads to F2x1xx + * return 0. (cf. Section 2.8.1 F10h BKDG) + */ + if (dct_ganging_enabled(pvt)) + return 0; + + offset += 0x100; + } + break; + + case 0x15: + /* + * F15h: F2x1xx addresses do not map explicitly to DCT1. + * We should select which DCT we access using F1x10C[DctCfgSel] + */ + dct = (dct && pvt->model == 0x30) ? 3 : dct; + f15h_select_dct(pvt, dct); + break; + + case 0x16: + if (dct) + return -EINVAL; + break; + + default: + break; + } + return amd64_read_pci_cfg(pvt->F2, offset, val); +} + +/* + * Memory scrubber control interface. For K8, memory scrubbing is handled by + * hardware and can involve L2 cache, dcache as well as the main memory. With + * F10, this is extended to L3 cache scrubbing on CPU models sporting that + * functionality. + * + * This causes the "units" for the scrubbing speed to vary from 64 byte blocks + * (dram) over to cache lines. This is nasty, so we will use bandwidth in + * bytes/sec for the setting. + * + * Currently, we only do dram scrubbing. If the scrubbing is done in software on + * other archs, we might not have access to the caches directly. + */ + +static inline void __f17h_set_scrubval(struct amd64_pvt *pvt, u32 scrubval) +{ + /* + * Fam17h supports scrub values between 0x5 and 0x14. Also, the values + * are shifted down by 0x5, so scrubval 0x5 is written to the register + * as 0x0, scrubval 0x6 as 0x1, etc. + */ + if (scrubval >= 0x5 && scrubval <= 0x14) { + scrubval -= 0x5; + pci_write_bits32(pvt->F6, F17H_SCR_LIMIT_ADDR, scrubval, 0xF); + pci_write_bits32(pvt->F6, F17H_SCR_BASE_ADDR, 1, 0x1); + } else { + pci_write_bits32(pvt->F6, F17H_SCR_BASE_ADDR, 0, 0x1); + } +} +/* + * Scan the scrub rate mapping table for a close or matching bandwidth value to + * issue. If requested is too big, then use last maximum value found. + */ +static int __set_scrub_rate(struct amd64_pvt *pvt, u32 new_bw, u32 min_rate) +{ + u32 scrubval; + int i; + + /* + * map the configured rate (new_bw) to a value specific to the AMD64 + * memory controller and apply to register. Search for the first + * bandwidth entry that is greater or equal than the setting requested + * and program that. If at last entry, turn off DRAM scrubbing. + * + * If no suitable bandwidth is found, turn off DRAM scrubbing entirely + * by falling back to the last element in scrubrates[]. + */ + for (i = 0; i < ARRAY_SIZE(scrubrates) - 1; i++) { + /* + * skip scrub rates which aren't recommended + * (see F10 BKDG, F3x58) + */ + if (scrubrates[i].scrubval < min_rate) + continue; + + if (scrubrates[i].bandwidth <= new_bw) + break; + } + + scrubval = scrubrates[i].scrubval; + + if (pvt->umc) { + __f17h_set_scrubval(pvt, scrubval); + } else if (pvt->fam == 0x15 && pvt->model == 0x60) { + f15h_select_dct(pvt, 0); + pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F); + f15h_select_dct(pvt, 1); + pci_write_bits32(pvt->F2, F15H_M60H_SCRCTRL, scrubval, 0x001F); + } else { + pci_write_bits32(pvt->F3, SCRCTRL, scrubval, 0x001F); + } + + if (scrubval) + return scrubrates[i].bandwidth; + + return 0; +} + +static int set_scrub_rate(struct mem_ctl_info *mci, u32 bw) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u32 min_scrubrate = 0x5; + + if (pvt->fam == 0xf) + min_scrubrate = 0x0; + + if (pvt->fam == 0x15) { + /* Erratum #505 */ + if (pvt->model < 0x10) + f15h_select_dct(pvt, 0); + + if (pvt->model == 0x60) + min_scrubrate = 0x6; + } + return __set_scrub_rate(pvt, bw, min_scrubrate); +} + +static int get_scrub_rate(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + int i, retval = -EINVAL; + u32 scrubval = 0; + + if (pvt->umc) { + amd64_read_pci_cfg(pvt->F6, F17H_SCR_BASE_ADDR, &scrubval); + if (scrubval & BIT(0)) { + amd64_read_pci_cfg(pvt->F6, F17H_SCR_LIMIT_ADDR, &scrubval); + scrubval &= 0xF; + scrubval += 0x5; + } else { + scrubval = 0; + } + } else if (pvt->fam == 0x15) { + /* Erratum #505 */ + if (pvt->model < 0x10) + f15h_select_dct(pvt, 0); + + if (pvt->model == 0x60) + amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval); + else + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); + } else { + amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval); + } + + scrubval = scrubval & 0x001F; + + for (i = 0; i < ARRAY_SIZE(scrubrates); i++) { + if (scrubrates[i].scrubval == scrubval) { + retval = scrubrates[i].bandwidth; + break; + } + } + return retval; +} + +/* + * returns true if the SysAddr given by sys_addr matches the + * DRAM base/limit associated with node_id + */ +static bool base_limit_match(struct amd64_pvt *pvt, u64 sys_addr, u8 nid) +{ + u64 addr; + + /* The K8 treats this as a 40-bit value. However, bits 63-40 will be + * all ones if the most significant implemented address bit is 1. + * Here we discard bits 63-40. See section 3.4.2 of AMD publication + * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1 + * Application Programming. + */ + addr = sys_addr & 0x000000ffffffffffull; + + return ((addr >= get_dram_base(pvt, nid)) && + (addr <= get_dram_limit(pvt, nid))); +} + +/* + * Attempt to map a SysAddr to a node. On success, return a pointer to the + * mem_ctl_info structure for the node that the SysAddr maps to. + * + * On failure, return NULL. + */ +static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, + u64 sys_addr) +{ + struct amd64_pvt *pvt; + u8 node_id; + u32 intlv_en, bits; + + /* + * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section + * 3.4.4.2) registers to map the SysAddr to a node ID. + */ + pvt = mci->pvt_info; + + /* + * The value of this field should be the same for all DRAM Base + * registers. Therefore we arbitrarily choose to read it from the + * register for node 0. + */ + intlv_en = dram_intlv_en(pvt, 0); + + if (intlv_en == 0) { + for (node_id = 0; node_id < DRAM_RANGES; node_id++) { + if (base_limit_match(pvt, sys_addr, node_id)) + goto found; + } + goto err_no_match; + } + + if (unlikely((intlv_en != 0x01) && + (intlv_en != 0x03) && + (intlv_en != 0x07))) { + amd64_warn("DRAM Base[IntlvEn] junk value: 0x%x, BIOS bug?\n", intlv_en); + return NULL; + } + + bits = (((u32) sys_addr) >> 12) & intlv_en; + + for (node_id = 0; ; ) { + if ((dram_intlv_sel(pvt, node_id) & intlv_en) == bits) + break; /* intlv_sel field matches */ + + if (++node_id >= DRAM_RANGES) + goto err_no_match; + } + + /* sanity test for sys_addr */ + if (unlikely(!base_limit_match(pvt, sys_addr, node_id))) { + amd64_warn("%s: sys_addr 0x%llx falls outside base/limit address" + "range for node %d with node interleaving enabled.\n", + __func__, sys_addr, node_id); + return NULL; + } + +found: + return edac_mc_find((int)node_id); + +err_no_match: + edac_dbg(2, "sys_addr 0x%lx doesn't match any node\n", + (unsigned long)sys_addr); + + return NULL; +} + +/* + * compute the CS base address of the @csrow on the DRAM controller @dct. + * For details see F2x[5C:40] in the processor's BKDG + */ +static void get_cs_base_and_mask(struct amd64_pvt *pvt, int csrow, u8 dct, + u64 *base, u64 *mask) +{ + u64 csbase, csmask, base_bits, mask_bits; + u8 addr_shift; + + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) { + csbase = pvt->csels[dct].csbases[csrow]; + csmask = pvt->csels[dct].csmasks[csrow]; + base_bits = GENMASK_ULL(31, 21) | GENMASK_ULL(15, 9); + mask_bits = GENMASK_ULL(29, 21) | GENMASK_ULL(15, 9); + addr_shift = 4; + + /* + * F16h and F15h, models 30h and later need two addr_shift values: + * 8 for high and 6 for low (cf. F16h BKDG). + */ + } else if (pvt->fam == 0x16 || + (pvt->fam == 0x15 && pvt->model >= 0x30)) { + csbase = pvt->csels[dct].csbases[csrow]; + csmask = pvt->csels[dct].csmasks[csrow >> 1]; + + *base = (csbase & GENMASK_ULL(15, 5)) << 6; + *base |= (csbase & GENMASK_ULL(30, 19)) << 8; + + *mask = ~0ULL; + /* poke holes for the csmask */ + *mask &= ~((GENMASK_ULL(15, 5) << 6) | + (GENMASK_ULL(30, 19) << 8)); + + *mask |= (csmask & GENMASK_ULL(15, 5)) << 6; + *mask |= (csmask & GENMASK_ULL(30, 19)) << 8; + + return; + } else { + csbase = pvt->csels[dct].csbases[csrow]; + csmask = pvt->csels[dct].csmasks[csrow >> 1]; + addr_shift = 8; + + if (pvt->fam == 0x15) + base_bits = mask_bits = + GENMASK_ULL(30,19) | GENMASK_ULL(13,5); + else + base_bits = mask_bits = + GENMASK_ULL(28,19) | GENMASK_ULL(13,5); + } + + *base = (csbase & base_bits) << addr_shift; + + *mask = ~0ULL; + /* poke holes for the csmask */ + *mask &= ~(mask_bits << addr_shift); + /* OR them in */ + *mask |= (csmask & mask_bits) << addr_shift; +} + +#define for_each_chip_select(i, dct, pvt) \ + for (i = 0; i < pvt->csels[dct].b_cnt; i++) + +#define chip_select_base(i, dct, pvt) \ + pvt->csels[dct].csbases[i] + +#define for_each_chip_select_mask(i, dct, pvt) \ + for (i = 0; i < pvt->csels[dct].m_cnt; i++) + +#define for_each_umc(i) \ + for (i = 0; i < fam_type->max_mcs; i++) + +/* + * @input_addr is an InputAddr associated with the node given by mci. Return the + * csrow that input_addr maps to, or -1 on failure (no csrow claims input_addr). + */ +static int input_addr_to_csrow(struct mem_ctl_info *mci, u64 input_addr) +{ + struct amd64_pvt *pvt; + int csrow; + u64 base, mask; + + pvt = mci->pvt_info; + + for_each_chip_select(csrow, 0, pvt) { + if (!csrow_enabled(csrow, 0, pvt)) + continue; + + get_cs_base_and_mask(pvt, csrow, 0, &base, &mask); + + mask = ~mask; + + if ((input_addr & mask) == (base & mask)) { + edac_dbg(2, "InputAddr 0x%lx matches csrow %d (node %d)\n", + (unsigned long)input_addr, csrow, + pvt->mc_node_id); + + return csrow; + } + } + edac_dbg(2, "no matching csrow for InputAddr 0x%lx (MC node %d)\n", + (unsigned long)input_addr, pvt->mc_node_id); + + return -1; +} + +/* + * Obtain info from the DRAM Hole Address Register (section 3.4.8, pub #26094) + * for the node represented by mci. Info is passed back in *hole_base, + * *hole_offset, and *hole_size. Function returns 0 if info is valid or 1 if + * info is invalid. Info may be invalid for either of the following reasons: + * + * - The revision of the node is not E or greater. In this case, the DRAM Hole + * Address Register does not exist. + * + * - The DramHoleValid bit is cleared in the DRAM Hole Address Register, + * indicating that its contents are not valid. + * + * The values passed back in *hole_base, *hole_offset, and *hole_size are + * complete 32-bit values despite the fact that the bitfields in the DHAR + * only represent bits 31-24 of the base and offset values. + */ +static int get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base, + u64 *hole_offset, u64 *hole_size) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + /* only revE and later have the DRAM Hole Address Register */ + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_E) { + edac_dbg(1, " revision %d for node %d does not support DHAR\n", + pvt->ext_model, pvt->mc_node_id); + return 1; + } + + /* valid for Fam10h and above */ + if (pvt->fam >= 0x10 && !dhar_mem_hoist_valid(pvt)) { + edac_dbg(1, " Dram Memory Hoisting is DISABLED on this system\n"); + return 1; + } + + if (!dhar_valid(pvt)) { + edac_dbg(1, " Dram Memory Hoisting is DISABLED on this node %d\n", + pvt->mc_node_id); + return 1; + } + + /* This node has Memory Hoisting */ + + /* +------------------+--------------------+--------------------+----- + * | memory | DRAM hole | relocated | + * | [0, (x - 1)] | [x, 0xffffffff] | addresses from | + * | | | DRAM hole | + * | | | [0x100000000, | + * | | | (0x100000000+ | + * | | | (0xffffffff-x))] | + * +------------------+--------------------+--------------------+----- + * + * Above is a diagram of physical memory showing the DRAM hole and the + * relocated addresses from the DRAM hole. As shown, the DRAM hole + * starts at address x (the base address) and extends through address + * 0xffffffff. The DRAM Hole Address Register (DHAR) relocates the + * addresses in the hole so that they start at 0x100000000. + */ + + *hole_base = dhar_base(pvt); + *hole_size = (1ULL << 32) - *hole_base; + + *hole_offset = (pvt->fam > 0xf) ? f10_dhar_offset(pvt) + : k8_dhar_offset(pvt); + + edac_dbg(1, " DHAR info for node %d base 0x%lx offset 0x%lx size 0x%lx\n", + pvt->mc_node_id, (unsigned long)*hole_base, + (unsigned long)*hole_offset, (unsigned long)*hole_size); + + return 0; +} + +#ifdef CONFIG_EDAC_DEBUG +#define EDAC_DCT_ATTR_SHOW(reg) \ +static ssize_t reg##_show(struct device *dev, \ + struct device_attribute *mattr, char *data) \ +{ \ + struct mem_ctl_info *mci = to_mci(dev); \ + struct amd64_pvt *pvt = mci->pvt_info; \ + \ + return sprintf(data, "0x%016llx\n", (u64)pvt->reg); \ +} + +EDAC_DCT_ATTR_SHOW(dhar); +EDAC_DCT_ATTR_SHOW(dbam0); +EDAC_DCT_ATTR_SHOW(top_mem); +EDAC_DCT_ATTR_SHOW(top_mem2); + +static ssize_t dram_hole_show(struct device *dev, struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + u64 hole_base = 0; + u64 hole_offset = 0; + u64 hole_size = 0; + + get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size); + + return sprintf(data, "%llx %llx %llx\n", hole_base, hole_offset, + hole_size); +} + +/* + * update NUM_DBG_ATTRS in case you add new members + */ +static DEVICE_ATTR(dhar, S_IRUGO, dhar_show, NULL); +static DEVICE_ATTR(dbam, S_IRUGO, dbam0_show, NULL); +static DEVICE_ATTR(topmem, S_IRUGO, top_mem_show, NULL); +static DEVICE_ATTR(topmem2, S_IRUGO, top_mem2_show, NULL); +static DEVICE_ATTR_RO(dram_hole); + +static struct attribute *dbg_attrs[] = { + &dev_attr_dhar.attr, + &dev_attr_dbam.attr, + &dev_attr_topmem.attr, + &dev_attr_topmem2.attr, + &dev_attr_dram_hole.attr, + NULL +}; + +static const struct attribute_group dbg_group = { + .attrs = dbg_attrs, +}; + +static ssize_t inject_section_show(struct device *dev, + struct device_attribute *mattr, char *buf) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + return sprintf(buf, "0x%x\n", pvt->injection.section); +} + +/* + * store error injection section value which refers to one of 4 16-byte sections + * within a 64-byte cacheline + * + * range: 0..3 + */ +static ssize_t inject_section_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret; + + ret = kstrtoul(data, 10, &value); + if (ret < 0) + return ret; + + if (value > 3) { + amd64_warn("%s: invalid section 0x%lx\n", __func__, value); + return -EINVAL; + } + + pvt->injection.section = (u32) value; + return count; +} + +static ssize_t inject_word_show(struct device *dev, + struct device_attribute *mattr, char *buf) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + return sprintf(buf, "0x%x\n", pvt->injection.word); +} + +/* + * store error injection word value which refers to one of 9 16-bit word of the + * 16-byte (128-bit + ECC bits) section + * + * range: 0..8 + */ +static ssize_t inject_word_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret; + + ret = kstrtoul(data, 10, &value); + if (ret < 0) + return ret; + + if (value > 8) { + amd64_warn("%s: invalid word 0x%lx\n", __func__, value); + return -EINVAL; + } + + pvt->injection.word = (u32) value; + return count; +} + +static ssize_t inject_ecc_vector_show(struct device *dev, + struct device_attribute *mattr, + char *buf) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + return sprintf(buf, "0x%x\n", pvt->injection.bit_map); +} + +/* + * store 16 bit error injection vector which enables injecting errors to the + * corresponding bit within the error injection word above. When used during a + * DRAM ECC read, it holds the contents of the of the DRAM ECC bits. + */ +static ssize_t inject_ecc_vector_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + int ret; + + ret = kstrtoul(data, 16, &value); + if (ret < 0) + return ret; + + if (value & 0xFFFF0000) { + amd64_warn("%s: invalid EccVector: 0x%lx\n", __func__, value); + return -EINVAL; + } + + pvt->injection.bit_map = (u32) value; + return count; +} + +/* + * Do a DRAM ECC read. Assemble staged values in the pvt area, format into + * fields needed by the injection registers and read the NB Array Data Port. + */ +static ssize_t inject_read_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + unsigned long value; + u32 section, word_bits; + int ret; + + ret = kstrtoul(data, 10, &value); + if (ret < 0) + return ret; + + /* Form value to choose 16-byte section of cacheline */ + section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section); + + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section); + + word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection); + + /* Issue 'word' and 'bit' along with the READ request */ + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits); + + edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits); + + return count; +} + +/* + * Do a DRAM ECC write. Assemble staged values in the pvt area and format into + * fields needed by the injection registers. + */ +static ssize_t inject_write_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct amd64_pvt *pvt = mci->pvt_info; + u32 section, word_bits, tmp; + unsigned long value; + int ret; + + ret = kstrtoul(data, 10, &value); + if (ret < 0) + return ret; + + /* Form value to choose 16-byte section of cacheline */ + section = F10_NB_ARRAY_DRAM | SET_NB_ARRAY_ADDR(pvt->injection.section); + + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_ADDR, section); + + word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection); + + pr_notice_once("Don't forget to decrease MCE polling interval in\n" + "/sys/bus/machinecheck/devices/machinecheck<CPUNUM>/check_interval\n" + "so that you can get the error report faster.\n"); + + on_each_cpu(disable_caches, NULL, 1); + + /* Issue 'word' and 'bit' along with the READ request */ + amd64_write_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, word_bits); + + retry: + /* wait until injection happens */ + amd64_read_pci_cfg(pvt->F3, F10_NB_ARRAY_DATA, &tmp); + if (tmp & F10_NB_ARR_ECC_WR_REQ) { + cpu_relax(); + goto retry; + } + + on_each_cpu(enable_caches, NULL, 1); + + edac_dbg(0, "section=0x%x word_bits=0x%x\n", section, word_bits); + + return count; +} + +/* + * update NUM_INJ_ATTRS in case you add new members + */ + +static DEVICE_ATTR_RW(inject_section); +static DEVICE_ATTR_RW(inject_word); +static DEVICE_ATTR_RW(inject_ecc_vector); +static DEVICE_ATTR_WO(inject_write); +static DEVICE_ATTR_WO(inject_read); + +static struct attribute *inj_attrs[] = { + &dev_attr_inject_section.attr, + &dev_attr_inject_word.attr, + &dev_attr_inject_ecc_vector.attr, + &dev_attr_inject_write.attr, + &dev_attr_inject_read.attr, + NULL +}; + +static umode_t inj_is_visible(struct kobject *kobj, struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev); + struct amd64_pvt *pvt = mci->pvt_info; + + /* Families which have that injection hw */ + if (pvt->fam >= 0x10 && pvt->fam <= 0x16) + return attr->mode; + + return 0; +} + +static const struct attribute_group inj_group = { + .attrs = inj_attrs, + .is_visible = inj_is_visible, +}; +#endif /* CONFIG_EDAC_DEBUG */ + +/* + * Return the DramAddr that the SysAddr given by @sys_addr maps to. It is + * assumed that sys_addr maps to the node given by mci. + * + * The first part of section 3.4.4 (p. 70) shows how the DRAM Base (section + * 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers are used to translate a + * SysAddr to a DramAddr. If the DRAM Hole Address Register (DHAR) is enabled, + * then it is also involved in translating a SysAddr to a DramAddr. Sections + * 3.4.8 and 3.5.8.2 describe the DHAR and how it is used for memory hoisting. + * These parts of the documentation are unclear. I interpret them as follows: + * + * When node n receives a SysAddr, it processes the SysAddr as follows: + * + * 1. It extracts the DRAMBase and DRAMLimit values from the DRAM Base and DRAM + * Limit registers for node n. If the SysAddr is not within the range + * specified by the base and limit values, then node n ignores the Sysaddr + * (since it does not map to node n). Otherwise continue to step 2 below. + * + * 2. If the DramHoleValid bit of the DHAR for node n is clear, the DHAR is + * disabled so skip to step 3 below. Otherwise see if the SysAddr is within + * the range of relocated addresses (starting at 0x100000000) from the DRAM + * hole. If not, skip to step 3 below. Else get the value of the + * DramHoleOffset field from the DHAR. To obtain the DramAddr, subtract the + * offset defined by this value from the SysAddr. + * + * 3. Obtain the base address for node n from the DRAMBase field of the DRAM + * Base register for node n. To obtain the DramAddr, subtract the base + * address from the SysAddr, as shown near the start of section 3.4.4 (p.70). + */ +static u64 sys_addr_to_dram_addr(struct mem_ctl_info *mci, u64 sys_addr) +{ + struct amd64_pvt *pvt = mci->pvt_info; + u64 dram_base, hole_base, hole_offset, hole_size, dram_addr; + int ret; + + dram_base = get_dram_base(pvt, pvt->mc_node_id); + + ret = get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size); + if (!ret) { + if ((sys_addr >= (1ULL << 32)) && + (sys_addr < ((1ULL << 32) + hole_size))) { + /* use DHAR to translate SysAddr to DramAddr */ + dram_addr = sys_addr - hole_offset; + + edac_dbg(2, "using DHAR to translate SysAddr 0x%lx to DramAddr 0x%lx\n", + (unsigned long)sys_addr, + (unsigned long)dram_addr); + + return dram_addr; + } + } + + /* + * Translate the SysAddr to a DramAddr as shown near the start of + * section 3.4.4 (p. 70). Although sys_addr is a 64-bit value, the k8 + * only deals with 40-bit values. Therefore we discard bits 63-40 of + * sys_addr below. If bit 39 of sys_addr is 1 then the bits we + * discard are all 1s. Otherwise the bits we discard are all 0s. See + * section 3.4.2 of AMD publication 24592: AMD x86-64 Architecture + * Programmer's Manual Volume 1 Application Programming. + */ + dram_addr = (sys_addr & GENMASK_ULL(39, 0)) - dram_base; + + edac_dbg(2, "using DRAM Base register to translate SysAddr 0x%lx to DramAddr 0x%lx\n", + (unsigned long)sys_addr, (unsigned long)dram_addr); + return dram_addr; +} + +/* + * @intlv_en is the value of the IntlvEn field from a DRAM Base register + * (section 3.4.4.1). Return the number of bits from a SysAddr that are used + * for node interleaving. + */ +static int num_node_interleave_bits(unsigned intlv_en) +{ + static const int intlv_shift_table[] = { 0, 1, 0, 2, 0, 0, 0, 3 }; + int n; + + BUG_ON(intlv_en > 7); + n = intlv_shift_table[intlv_en]; + return n; +} + +/* Translate the DramAddr given by @dram_addr to an InputAddr. */ +static u64 dram_addr_to_input_addr(struct mem_ctl_info *mci, u64 dram_addr) +{ + struct amd64_pvt *pvt; + int intlv_shift; + u64 input_addr; + + pvt = mci->pvt_info; + + /* + * See the start of section 3.4.4 (p. 70, BKDG #26094, K8, revA-E) + * concerning translating a DramAddr to an InputAddr. + */ + intlv_shift = num_node_interleave_bits(dram_intlv_en(pvt, 0)); + input_addr = ((dram_addr >> intlv_shift) & GENMASK_ULL(35, 12)) + + (dram_addr & 0xfff); + + edac_dbg(2, " Intlv Shift=%d DramAddr=0x%lx maps to InputAddr=0x%lx\n", + intlv_shift, (unsigned long)dram_addr, + (unsigned long)input_addr); + + return input_addr; +} + +/* + * Translate the SysAddr represented by @sys_addr to an InputAddr. It is + * assumed that @sys_addr maps to the node given by mci. + */ +static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr) +{ + u64 input_addr; + + input_addr = + dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr)); + + edac_dbg(2, "SysAddr 0x%lx translates to InputAddr 0x%lx\n", + (unsigned long)sys_addr, (unsigned long)input_addr); + + return input_addr; +} + +/* Map the Error address to a PAGE and PAGE OFFSET. */ +static inline void error_address_to_page_and_offset(u64 error_address, + struct err_info *err) +{ + err->page = (u32) (error_address >> PAGE_SHIFT); + err->offset = ((u32) error_address) & ~PAGE_MASK; +} + +/* + * @sys_addr is an error address (a SysAddr) extracted from the MCA NB Address + * Low (section 3.6.4.5) and MCA NB Address High (section 3.6.4.6) registers + * of a node that detected an ECC memory error. mci represents the node that + * the error address maps to (possibly different from the node that detected + * the error). Return the number of the csrow that sys_addr maps to, or -1 on + * error. + */ +static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr) +{ + int csrow; + + csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr)); + + if (csrow == -1) + amd64_mc_err(mci, "Failed to translate InputAddr to csrow for " + "address 0x%lx\n", (unsigned long)sys_addr); + return csrow; +} + +/* Protect the PCI config register pairs used for DF indirect access. */ +static DEFINE_MUTEX(df_indirect_mutex); + +/* + * Data Fabric Indirect Access uses FICAA/FICAD. + * + * Fabric Indirect Configuration Access Address (FICAA): Constructed based + * on the device's Instance Id and the PCI function and register offset of + * the desired register. + * + * Fabric Indirect Configuration Access Data (FICAD): There are FICAD LO + * and FICAD HI registers but so far we only need the LO register. + * + * Use Instance Id 0xFF to indicate a broadcast read. + */ +#define DF_BROADCAST 0xFF +static int __df_indirect_read(u16 node, u8 func, u16 reg, u8 instance_id, u32 *lo) +{ + struct pci_dev *F4; + u32 ficaa; + int err = -ENODEV; + + if (node >= amd_nb_num()) + goto out; + + F4 = node_to_amd_nb(node)->link; + if (!F4) + goto out; + + ficaa = (instance_id == DF_BROADCAST) ? 0 : 1; + ficaa |= reg & 0x3FC; + ficaa |= (func & 0x7) << 11; + ficaa |= instance_id << 16; + + mutex_lock(&df_indirect_mutex); + + err = pci_write_config_dword(F4, 0x5C, ficaa); + if (err) { + pr_warn("Error writing DF Indirect FICAA, FICAA=0x%x\n", ficaa); + goto out_unlock; + } + + err = pci_read_config_dword(F4, 0x98, lo); + if (err) + pr_warn("Error reading DF Indirect FICAD LO, FICAA=0x%x.\n", ficaa); + +out_unlock: + mutex_unlock(&df_indirect_mutex); + +out: + return err; +} + +static int df_indirect_read_instance(u16 node, u8 func, u16 reg, u8 instance_id, u32 *lo) +{ + return __df_indirect_read(node, func, reg, instance_id, lo); +} + +static int df_indirect_read_broadcast(u16 node, u8 func, u16 reg, u32 *lo) +{ + return __df_indirect_read(node, func, reg, DF_BROADCAST, lo); +} + +struct addr_ctx { + u64 ret_addr; + u32 tmp; + u16 nid; + u8 inst_id; +}; + +static int umc_normaddr_to_sysaddr(u64 norm_addr, u16 nid, u8 umc, u64 *sys_addr) +{ + u64 dram_base_addr, dram_limit_addr, dram_hole_base; + + u8 die_id_shift, die_id_mask, socket_id_shift, socket_id_mask; + u8 intlv_num_dies, intlv_num_chan, intlv_num_sockets; + u8 intlv_addr_sel, intlv_addr_bit; + u8 num_intlv_bits, hashed_bit; + u8 lgcy_mmio_hole_en, base = 0; + u8 cs_mask, cs_id = 0; + bool hash_enabled = false; + + struct addr_ctx ctx; + + memset(&ctx, 0, sizeof(ctx)); + + /* Start from the normalized address */ + ctx.ret_addr = norm_addr; + + ctx.nid = nid; + ctx.inst_id = umc; + + /* Read D18F0x1B4 (DramOffset), check if base 1 is used. */ + if (df_indirect_read_instance(nid, 0, 0x1B4, umc, &ctx.tmp)) + goto out_err; + + /* Remove HiAddrOffset from normalized address, if enabled: */ + if (ctx.tmp & BIT(0)) { + u64 hi_addr_offset = (ctx.tmp & GENMASK_ULL(31, 20)) << 8; + + if (norm_addr >= hi_addr_offset) { + ctx.ret_addr -= hi_addr_offset; + base = 1; + } + } + + /* Read D18F0x110 (DramBaseAddress). */ + if (df_indirect_read_instance(nid, 0, 0x110 + (8 * base), umc, &ctx.tmp)) + goto out_err; + + /* Check if address range is valid. */ + if (!(ctx.tmp & BIT(0))) { + pr_err("%s: Invalid DramBaseAddress range: 0x%x.\n", + __func__, ctx.tmp); + goto out_err; + } + + lgcy_mmio_hole_en = ctx.tmp & BIT(1); + intlv_num_chan = (ctx.tmp >> 4) & 0xF; + intlv_addr_sel = (ctx.tmp >> 8) & 0x7; + dram_base_addr = (ctx.tmp & GENMASK_ULL(31, 12)) << 16; + + /* {0, 1, 2, 3} map to address bits {8, 9, 10, 11} respectively */ + if (intlv_addr_sel > 3) { + pr_err("%s: Invalid interleave address select %d.\n", + __func__, intlv_addr_sel); + goto out_err; + } + + /* Read D18F0x114 (DramLimitAddress). */ + if (df_indirect_read_instance(nid, 0, 0x114 + (8 * base), umc, &ctx.tmp)) + goto out_err; + + intlv_num_sockets = (ctx.tmp >> 8) & 0x1; + intlv_num_dies = (ctx.tmp >> 10) & 0x3; + dram_limit_addr = ((ctx.tmp & GENMASK_ULL(31, 12)) << 16) | GENMASK_ULL(27, 0); + + intlv_addr_bit = intlv_addr_sel + 8; + + /* Re-use intlv_num_chan by setting it equal to log2(#channels) */ + switch (intlv_num_chan) { + case 0: intlv_num_chan = 0; break; + case 1: intlv_num_chan = 1; break; + case 3: intlv_num_chan = 2; break; + case 5: intlv_num_chan = 3; break; + case 7: intlv_num_chan = 4; break; + + case 8: intlv_num_chan = 1; + hash_enabled = true; + break; + default: + pr_err("%s: Invalid number of interleaved channels %d.\n", + __func__, intlv_num_chan); + goto out_err; + } + + num_intlv_bits = intlv_num_chan; + + if (intlv_num_dies > 2) { + pr_err("%s: Invalid number of interleaved nodes/dies %d.\n", + __func__, intlv_num_dies); + goto out_err; + } + + num_intlv_bits += intlv_num_dies; + + /* Add a bit if sockets are interleaved. */ + num_intlv_bits += intlv_num_sockets; + + /* Assert num_intlv_bits <= 4 */ + if (num_intlv_bits > 4) { + pr_err("%s: Invalid interleave bits %d.\n", + __func__, num_intlv_bits); + goto out_err; + } + + if (num_intlv_bits > 0) { + u64 temp_addr_x, temp_addr_i, temp_addr_y; + u8 die_id_bit, sock_id_bit, cs_fabric_id; + + /* + * Read FabricBlockInstanceInformation3_CS[BlockFabricID]. + * This is the fabric id for this coherent slave. Use + * umc/channel# as instance id of the coherent slave + * for FICAA. + */ + if (df_indirect_read_instance(nid, 0, 0x50, umc, &ctx.tmp)) + goto out_err; + + cs_fabric_id = (ctx.tmp >> 8) & 0xFF; + die_id_bit = 0; + + /* If interleaved over more than 1 channel: */ + if (intlv_num_chan) { + die_id_bit = intlv_num_chan; + cs_mask = (1 << die_id_bit) - 1; + cs_id = cs_fabric_id & cs_mask; + } + + sock_id_bit = die_id_bit; + + /* Read D18F1x208 (SystemFabricIdMask). */ + if (intlv_num_dies || intlv_num_sockets) + if (df_indirect_read_broadcast(nid, 1, 0x208, &ctx.tmp)) + goto out_err; + + /* If interleaved over more than 1 die. */ + if (intlv_num_dies) { + sock_id_bit = die_id_bit + intlv_num_dies; + die_id_shift = (ctx.tmp >> 24) & 0xF; + die_id_mask = (ctx.tmp >> 8) & 0xFF; + + cs_id |= ((cs_fabric_id & die_id_mask) >> die_id_shift) << die_id_bit; + } + + /* If interleaved over more than 1 socket. */ + if (intlv_num_sockets) { + socket_id_shift = (ctx.tmp >> 28) & 0xF; + socket_id_mask = (ctx.tmp >> 16) & 0xFF; + + cs_id |= ((cs_fabric_id & socket_id_mask) >> socket_id_shift) << sock_id_bit; + } + + /* + * The pre-interleaved address consists of XXXXXXIIIYYYYY + * where III is the ID for this CS, and XXXXXXYYYYY are the + * address bits from the post-interleaved address. + * "num_intlv_bits" has been calculated to tell us how many "I" + * bits there are. "intlv_addr_bit" tells us how many "Y" bits + * there are (where "I" starts). + */ + temp_addr_y = ctx.ret_addr & GENMASK_ULL(intlv_addr_bit - 1, 0); + temp_addr_i = (cs_id << intlv_addr_bit); + temp_addr_x = (ctx.ret_addr & GENMASK_ULL(63, intlv_addr_bit)) << num_intlv_bits; + ctx.ret_addr = temp_addr_x | temp_addr_i | temp_addr_y; + } + + /* Add dram base address */ + ctx.ret_addr += dram_base_addr; + + /* If legacy MMIO hole enabled */ + if (lgcy_mmio_hole_en) { + if (df_indirect_read_broadcast(nid, 0, 0x104, &ctx.tmp)) + goto out_err; + + dram_hole_base = ctx.tmp & GENMASK(31, 24); + if (ctx.ret_addr >= dram_hole_base) + ctx.ret_addr += (BIT_ULL(32) - dram_hole_base); + } + + if (hash_enabled) { + /* Save some parentheses and grab ls-bit at the end. */ + hashed_bit = (ctx.ret_addr >> 12) ^ + (ctx.ret_addr >> 18) ^ + (ctx.ret_addr >> 21) ^ + (ctx.ret_addr >> 30) ^ + cs_id; + + hashed_bit &= BIT(0); + + if (hashed_bit != ((ctx.ret_addr >> intlv_addr_bit) & BIT(0))) + ctx.ret_addr ^= BIT(intlv_addr_bit); + } + + /* Is calculated system address is above DRAM limit address? */ + if (ctx.ret_addr > dram_limit_addr) + goto out_err; + + *sys_addr = ctx.ret_addr; + return 0; + +out_err: + return -EINVAL; +} + +static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16); + +/* + * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs + * are ECC capable. + */ +static unsigned long determine_edac_cap(struct amd64_pvt *pvt) +{ + unsigned long edac_cap = EDAC_FLAG_NONE; + u8 bit; + + if (pvt->umc) { + u8 i, umc_en_mask = 0, dimm_ecc_en_mask = 0; + + for_each_umc(i) { + if (!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT)) + continue; + + umc_en_mask |= BIT(i); + + /* UMC Configuration bit 12 (DimmEccEn) */ + if (pvt->umc[i].umc_cfg & BIT(12)) + dimm_ecc_en_mask |= BIT(i); + } + + if (umc_en_mask == dimm_ecc_en_mask) + edac_cap = EDAC_FLAG_SECDED; + } else { + bit = (pvt->fam > 0xf || pvt->ext_model >= K8_REV_F) + ? 19 + : 17; + + if (pvt->dclr0 & BIT(bit)) + edac_cap = EDAC_FLAG_SECDED; + } + + return edac_cap; +} + +static void debug_display_dimm_sizes(struct amd64_pvt *, u8); + +static void debug_dump_dramcfg_low(struct amd64_pvt *pvt, u32 dclr, int chan) +{ + edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr); + + if (pvt->dram_type == MEM_LRDDR3) { + u32 dcsm = pvt->csels[chan].csmasks[0]; + /* + * It's assumed all LRDIMMs in a DCT are going to be of + * same 'type' until proven otherwise. So, use a cs + * value of '0' here to get dcsm value. + */ + edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3)); + } + + edac_dbg(1, "All DIMMs support ECC:%s\n", + (dclr & BIT(19)) ? "yes" : "no"); + + + edac_dbg(1, " PAR/ERR parity: %s\n", + (dclr & BIT(8)) ? "enabled" : "disabled"); + + if (pvt->fam == 0x10) + edac_dbg(1, " DCT 128bit mode width: %s\n", + (dclr & BIT(11)) ? "128b" : "64b"); + + edac_dbg(1, " x4 logical DIMMs present: L0: %s L1: %s L2: %s L3: %s\n", + (dclr & BIT(12)) ? "yes" : "no", + (dclr & BIT(13)) ? "yes" : "no", + (dclr & BIT(14)) ? "yes" : "no", + (dclr & BIT(15)) ? "yes" : "no"); +} + +#define CS_EVEN_PRIMARY BIT(0) +#define CS_ODD_PRIMARY BIT(1) +#define CS_EVEN_SECONDARY BIT(2) +#define CS_ODD_SECONDARY BIT(3) +#define CS_3R_INTERLEAVE BIT(4) + +#define CS_EVEN (CS_EVEN_PRIMARY | CS_EVEN_SECONDARY) +#define CS_ODD (CS_ODD_PRIMARY | CS_ODD_SECONDARY) + +static int f17_get_cs_mode(int dimm, u8 ctrl, struct amd64_pvt *pvt) +{ + u8 base, count = 0; + int cs_mode = 0; + + if (csrow_enabled(2 * dimm, ctrl, pvt)) + cs_mode |= CS_EVEN_PRIMARY; + + if (csrow_enabled(2 * dimm + 1, ctrl, pvt)) + cs_mode |= CS_ODD_PRIMARY; + + /* Asymmetric dual-rank DIMM support. */ + if (csrow_sec_enabled(2 * dimm + 1, ctrl, pvt)) + cs_mode |= CS_ODD_SECONDARY; + + /* + * 3 Rank inteleaving support. + * There should be only three bases enabled and their two masks should + * be equal. + */ + for_each_chip_select(base, ctrl, pvt) + count += csrow_enabled(base, ctrl, pvt); + + if (count == 3 && + pvt->csels[ctrl].csmasks[0] == pvt->csels[ctrl].csmasks[1]) { + edac_dbg(1, "3R interleaving in use.\n"); + cs_mode |= CS_3R_INTERLEAVE; + } + + return cs_mode; +} + +static void debug_display_dimm_sizes_df(struct amd64_pvt *pvt, u8 ctrl) +{ + int dimm, size0, size1, cs0, cs1, cs_mode; + + edac_printk(KERN_DEBUG, EDAC_MC, "UMC%d chip selects:\n", ctrl); + + for (dimm = 0; dimm < 2; dimm++) { + cs0 = dimm * 2; + cs1 = dimm * 2 + 1; + + cs_mode = f17_get_cs_mode(dimm, ctrl, pvt); + + size0 = pvt->ops->dbam_to_cs(pvt, ctrl, cs_mode, cs0); + size1 = pvt->ops->dbam_to_cs(pvt, ctrl, cs_mode, cs1); + + amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n", + cs0, size0, + cs1, size1); + } +} + +static void __dump_misc_regs_df(struct amd64_pvt *pvt) +{ + struct amd64_umc *umc; + u32 i, tmp, umc_base; + + for_each_umc(i) { + umc_base = get_umc_base(i); + umc = &pvt->umc[i]; + + edac_dbg(1, "UMC%d DIMM cfg: 0x%x\n", i, umc->dimm_cfg); + edac_dbg(1, "UMC%d UMC cfg: 0x%x\n", i, umc->umc_cfg); + edac_dbg(1, "UMC%d SDP ctrl: 0x%x\n", i, umc->sdp_ctrl); + edac_dbg(1, "UMC%d ECC ctrl: 0x%x\n", i, umc->ecc_ctrl); + + amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_ECC_BAD_SYMBOL, &tmp); + edac_dbg(1, "UMC%d ECC bad symbol: 0x%x\n", i, tmp); + + amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_UMC_CAP, &tmp); + edac_dbg(1, "UMC%d UMC cap: 0x%x\n", i, tmp); + edac_dbg(1, "UMC%d UMC cap high: 0x%x\n", i, umc->umc_cap_hi); + + edac_dbg(1, "UMC%d ECC capable: %s, ChipKill ECC capable: %s\n", + i, (umc->umc_cap_hi & BIT(30)) ? "yes" : "no", + (umc->umc_cap_hi & BIT(31)) ? "yes" : "no"); + edac_dbg(1, "UMC%d All DIMMs support ECC: %s\n", + i, (umc->umc_cfg & BIT(12)) ? "yes" : "no"); + edac_dbg(1, "UMC%d x4 DIMMs present: %s\n", + i, (umc->dimm_cfg & BIT(6)) ? "yes" : "no"); + edac_dbg(1, "UMC%d x16 DIMMs present: %s\n", + i, (umc->dimm_cfg & BIT(7)) ? "yes" : "no"); + + if (umc->dram_type == MEM_LRDDR4 || umc->dram_type == MEM_LRDDR5) { + amd_smn_read(pvt->mc_node_id, + umc_base + get_umc_reg(UMCCH_ADDR_CFG), + &tmp); + edac_dbg(1, "UMC%d LRDIMM %dx rank multiply\n", + i, 1 << ((tmp >> 4) & 0x3)); + } + + debug_display_dimm_sizes_df(pvt, i); + } + + edac_dbg(1, "F0x104 (DRAM Hole Address): 0x%08x, base: 0x%08x\n", + pvt->dhar, dhar_base(pvt)); +} + +/* Display and decode various NB registers for debug purposes. */ +static void __dump_misc_regs(struct amd64_pvt *pvt) +{ + edac_dbg(1, "F3xE8 (NB Cap): 0x%08x\n", pvt->nbcap); + + edac_dbg(1, " NB two channel DRAM capable: %s\n", + (pvt->nbcap & NBCAP_DCT_DUAL) ? "yes" : "no"); + + edac_dbg(1, " ECC capable: %s, ChipKill ECC capable: %s\n", + (pvt->nbcap & NBCAP_SECDED) ? "yes" : "no", + (pvt->nbcap & NBCAP_CHIPKILL) ? "yes" : "no"); + + debug_dump_dramcfg_low(pvt, pvt->dclr0, 0); + + edac_dbg(1, "F3xB0 (Online Spare): 0x%08x\n", pvt->online_spare); + + edac_dbg(1, "F1xF0 (DRAM Hole Address): 0x%08x, base: 0x%08x, offset: 0x%08x\n", + pvt->dhar, dhar_base(pvt), + (pvt->fam == 0xf) ? k8_dhar_offset(pvt) + : f10_dhar_offset(pvt)); + + debug_display_dimm_sizes(pvt, 0); + + /* everything below this point is Fam10h and above */ + if (pvt->fam == 0xf) + return; + + debug_display_dimm_sizes(pvt, 1); + + /* Only if NOT ganged does dclr1 have valid info */ + if (!dct_ganging_enabled(pvt)) + debug_dump_dramcfg_low(pvt, pvt->dclr1, 1); +} + +/* Display and decode various NB registers for debug purposes. */ +static void dump_misc_regs(struct amd64_pvt *pvt) +{ + if (pvt->umc) + __dump_misc_regs_df(pvt); + else + __dump_misc_regs(pvt); + + edac_dbg(1, " DramHoleValid: %s\n", dhar_valid(pvt) ? "yes" : "no"); + + amd64_info("using x%u syndromes.\n", pvt->ecc_sym_sz); +} + +/* + * See BKDG, F2x[1,0][5C:40], F2[1,0][6C:60] + */ +static void prep_chip_selects(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) { + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8; + } else if (pvt->fam == 0x15 && pvt->model == 0x30) { + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2; + } else if (pvt->fam >= 0x17) { + int umc; + + for_each_umc(umc) { + pvt->csels[umc].b_cnt = 4; + pvt->csels[umc].m_cnt = fam_type->flags.zn_regs_v2 ? 4 : 2; + } + + } else { + pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8; + pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 4; + } +} + +static void read_umc_base_mask(struct amd64_pvt *pvt) +{ + u32 umc_base_reg, umc_base_reg_sec; + u32 umc_mask_reg, umc_mask_reg_sec; + u32 base_reg, base_reg_sec; + u32 mask_reg, mask_reg_sec; + u32 *base, *base_sec; + u32 *mask, *mask_sec; + int cs, umc; + + for_each_umc(umc) { + umc_base_reg = get_umc_base(umc) + UMCCH_BASE_ADDR; + umc_base_reg_sec = get_umc_base(umc) + UMCCH_BASE_ADDR_SEC; + + for_each_chip_select(cs, umc, pvt) { + base = &pvt->csels[umc].csbases[cs]; + base_sec = &pvt->csels[umc].csbases_sec[cs]; + + base_reg = umc_base_reg + (cs * 4); + base_reg_sec = umc_base_reg_sec + (cs * 4); + + if (!amd_smn_read(pvt->mc_node_id, base_reg, base)) + edac_dbg(0, " DCSB%d[%d]=0x%08x reg: 0x%x\n", + umc, cs, *base, base_reg); + + if (!amd_smn_read(pvt->mc_node_id, base_reg_sec, base_sec)) + edac_dbg(0, " DCSB_SEC%d[%d]=0x%08x reg: 0x%x\n", + umc, cs, *base_sec, base_reg_sec); + } + + umc_mask_reg = get_umc_base(umc) + UMCCH_ADDR_MASK; + umc_mask_reg_sec = get_umc_base(umc) + get_umc_reg(UMCCH_ADDR_MASK_SEC); + + for_each_chip_select_mask(cs, umc, pvt) { + mask = &pvt->csels[umc].csmasks[cs]; + mask_sec = &pvt->csels[umc].csmasks_sec[cs]; + + mask_reg = umc_mask_reg + (cs * 4); + mask_reg_sec = umc_mask_reg_sec + (cs * 4); + + if (!amd_smn_read(pvt->mc_node_id, mask_reg, mask)) + edac_dbg(0, " DCSM%d[%d]=0x%08x reg: 0x%x\n", + umc, cs, *mask, mask_reg); + + if (!amd_smn_read(pvt->mc_node_id, mask_reg_sec, mask_sec)) + edac_dbg(0, " DCSM_SEC%d[%d]=0x%08x reg: 0x%x\n", + umc, cs, *mask_sec, mask_reg_sec); + } + } +} + +/* + * Function 2 Offset F10_DCSB0; read in the DCS Base and DCS Mask registers + */ +static void read_dct_base_mask(struct amd64_pvt *pvt) +{ + int cs; + + prep_chip_selects(pvt); + + if (pvt->umc) + return read_umc_base_mask(pvt); + + for_each_chip_select(cs, 0, pvt) { + int reg0 = DCSB0 + (cs * 4); + int reg1 = DCSB1 + (cs * 4); + u32 *base0 = &pvt->csels[0].csbases[cs]; + u32 *base1 = &pvt->csels[1].csbases[cs]; + + if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, base0)) + edac_dbg(0, " DCSB0[%d]=0x%08x reg: F2x%x\n", + cs, *base0, reg0); + + if (pvt->fam == 0xf) + continue; + + if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, base1)) + edac_dbg(0, " DCSB1[%d]=0x%08x reg: F2x%x\n", + cs, *base1, (pvt->fam == 0x10) ? reg1 + : reg0); + } + + for_each_chip_select_mask(cs, 0, pvt) { + int reg0 = DCSM0 + (cs * 4); + int reg1 = DCSM1 + (cs * 4); + u32 *mask0 = &pvt->csels[0].csmasks[cs]; + u32 *mask1 = &pvt->csels[1].csmasks[cs]; + + if (!amd64_read_dct_pci_cfg(pvt, 0, reg0, mask0)) + edac_dbg(0, " DCSM0[%d]=0x%08x reg: F2x%x\n", + cs, *mask0, reg0); + + if (pvt->fam == 0xf) + continue; + + if (!amd64_read_dct_pci_cfg(pvt, 1, reg0, mask1)) + edac_dbg(0, " DCSM1[%d]=0x%08x reg: F2x%x\n", + cs, *mask1, (pvt->fam == 0x10) ? reg1 + : reg0); + } +} + +static void determine_memory_type_df(struct amd64_pvt *pvt) +{ + struct amd64_umc *umc; + u32 i; + + for_each_umc(i) { + umc = &pvt->umc[i]; + + if (!(umc->sdp_ctrl & UMC_SDP_INIT)) { + umc->dram_type = MEM_EMPTY; + continue; + } + + /* + * Check if the system supports the "DDR Type" field in UMC Config + * and has DDR5 DIMMs in use. + */ + if (fam_type->flags.zn_regs_v2 && ((umc->umc_cfg & GENMASK(2, 0)) == 0x1)) { + if (umc->dimm_cfg & BIT(5)) + umc->dram_type = MEM_LRDDR5; + else if (umc->dimm_cfg & BIT(4)) + umc->dram_type = MEM_RDDR5; + else + umc->dram_type = MEM_DDR5; + } else { + if (umc->dimm_cfg & BIT(5)) + umc->dram_type = MEM_LRDDR4; + else if (umc->dimm_cfg & BIT(4)) + umc->dram_type = MEM_RDDR4; + else + umc->dram_type = MEM_DDR4; + } + + edac_dbg(1, " UMC%d DIMM type: %s\n", i, edac_mem_types[umc->dram_type]); + } +} + +static void determine_memory_type(struct amd64_pvt *pvt) +{ + u32 dram_ctrl, dcsm; + + if (pvt->umc) + return determine_memory_type_df(pvt); + + switch (pvt->fam) { + case 0xf: + if (pvt->ext_model >= K8_REV_F) + goto ddr3; + + pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR; + return; + + case 0x10: + if (pvt->dchr0 & DDR3_MODE) + goto ddr3; + + pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2; + return; + + case 0x15: + if (pvt->model < 0x60) + goto ddr3; + + /* + * Model 0x60h needs special handling: + * + * We use a Chip Select value of '0' to obtain dcsm. + * Theoretically, it is possible to populate LRDIMMs of different + * 'Rank' value on a DCT. But this is not the common case. So, + * it's reasonable to assume all DIMMs are going to be of same + * 'type' until proven otherwise. + */ + amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL, &dram_ctrl); + dcsm = pvt->csels[0].csmasks[0]; + + if (((dram_ctrl >> 8) & 0x7) == 0x2) + pvt->dram_type = MEM_DDR4; + else if (pvt->dclr0 & BIT(16)) + pvt->dram_type = MEM_DDR3; + else if (dcsm & 0x3) + pvt->dram_type = MEM_LRDDR3; + else + pvt->dram_type = MEM_RDDR3; + + return; + + case 0x16: + goto ddr3; + + default: + WARN(1, KERN_ERR "%s: Family??? 0x%x\n", __func__, pvt->fam); + pvt->dram_type = MEM_EMPTY; + } + return; + +ddr3: + pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3; +} + +/* Get the number of DCT channels the memory controller is using. */ +static int k8_early_channel_count(struct amd64_pvt *pvt) +{ + int flag; + + if (pvt->ext_model >= K8_REV_F) + /* RevF (NPT) and later */ + flag = pvt->dclr0 & WIDTH_128; + else + /* RevE and earlier */ + flag = pvt->dclr0 & REVE_WIDTH_128; + + /* not used */ + pvt->dclr1 = 0; + + return (flag) ? 2 : 1; +} + +/* On F10h and later ErrAddr is MC4_ADDR[47:1] */ +static u64 get_error_address(struct amd64_pvt *pvt, struct mce *m) +{ + u16 mce_nid = topology_die_id(m->extcpu); + struct mem_ctl_info *mci; + u8 start_bit = 1; + u8 end_bit = 47; + u64 addr; + + mci = edac_mc_find(mce_nid); + if (!mci) + return 0; + + pvt = mci->pvt_info; + + if (pvt->fam == 0xf) { + start_bit = 3; + end_bit = 39; + } + + addr = m->addr & GENMASK_ULL(end_bit, start_bit); + + /* + * Erratum 637 workaround + */ + if (pvt->fam == 0x15) { + u64 cc6_base, tmp_addr; + u32 tmp; + u8 intlv_en; + + if ((addr & GENMASK_ULL(47, 24)) >> 24 != 0x00fdf7) + return addr; + + + amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_LIM, &tmp); + intlv_en = tmp >> 21 & 0x7; + + /* add [47:27] + 3 trailing bits */ + cc6_base = (tmp & GENMASK_ULL(20, 0)) << 3; + + /* reverse and add DramIntlvEn */ + cc6_base |= intlv_en ^ 0x7; + + /* pin at [47:24] */ + cc6_base <<= 24; + + if (!intlv_en) + return cc6_base | (addr & GENMASK_ULL(23, 0)); + + amd64_read_pci_cfg(pvt->F1, DRAM_LOCAL_NODE_BASE, &tmp); + + /* faster log2 */ + tmp_addr = (addr & GENMASK_ULL(23, 12)) << __fls(intlv_en + 1); + + /* OR DramIntlvSel into bits [14:12] */ + tmp_addr |= (tmp & GENMASK_ULL(23, 21)) >> 9; + + /* add remaining [11:0] bits from original MC4_ADDR */ + tmp_addr |= addr & GENMASK_ULL(11, 0); + + return cc6_base | tmp_addr; + } + + return addr; +} + +static struct pci_dev *pci_get_related_function(unsigned int vendor, + unsigned int device, + struct pci_dev *related) +{ + struct pci_dev *dev = NULL; + + while ((dev = pci_get_device(vendor, device, dev))) { + if (pci_domain_nr(dev->bus) == pci_domain_nr(related->bus) && + (dev->bus->number == related->bus->number) && + (PCI_SLOT(dev->devfn) == PCI_SLOT(related->devfn))) + break; + } + + return dev; +} + +static void read_dram_base_limit_regs(struct amd64_pvt *pvt, unsigned range) +{ + struct amd_northbridge *nb; + struct pci_dev *f1 = NULL; + unsigned int pci_func; + int off = range << 3; + u32 llim; + + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_LO + off, &pvt->ranges[range].base.lo); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_LO + off, &pvt->ranges[range].lim.lo); + + if (pvt->fam == 0xf) + return; + + if (!dram_rw(pvt, range)) + return; + + amd64_read_pci_cfg(pvt->F1, DRAM_BASE_HI + off, &pvt->ranges[range].base.hi); + amd64_read_pci_cfg(pvt->F1, DRAM_LIMIT_HI + off, &pvt->ranges[range].lim.hi); + + /* F15h: factor in CC6 save area by reading dst node's limit reg */ + if (pvt->fam != 0x15) + return; + + nb = node_to_amd_nb(dram_dst_node(pvt, range)); + if (WARN_ON(!nb)) + return; + + if (pvt->model == 0x60) + pci_func = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1; + else if (pvt->model == 0x30) + pci_func = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1; + else + pci_func = PCI_DEVICE_ID_AMD_15H_NB_F1; + + f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc); + if (WARN_ON(!f1)) + return; + + amd64_read_pci_cfg(f1, DRAM_LOCAL_NODE_LIM, &llim); + + pvt->ranges[range].lim.lo &= GENMASK_ULL(15, 0); + + /* {[39:27],111b} */ + pvt->ranges[range].lim.lo |= ((llim & 0x1fff) << 3 | 0x7) << 16; + + pvt->ranges[range].lim.hi &= GENMASK_ULL(7, 0); + + /* [47:40] */ + pvt->ranges[range].lim.hi |= llim >> 13; + + pci_dev_put(f1); +} + +static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr, + struct err_info *err) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + error_address_to_page_and_offset(sys_addr, err); + + /* + * Find out which node the error address belongs to. This may be + * different from the node that detected the error. + */ + err->src_mci = find_mc_by_sys_addr(mci, sys_addr); + if (!err->src_mci) { + amd64_mc_err(mci, "failed to map error addr 0x%lx to a node\n", + (unsigned long)sys_addr); + err->err_code = ERR_NODE; + return; + } + + /* Now map the sys_addr to a CSROW */ + err->csrow = sys_addr_to_csrow(err->src_mci, sys_addr); + if (err->csrow < 0) { + err->err_code = ERR_CSROW; + return; + } + + /* CHIPKILL enabled */ + if (pvt->nbcfg & NBCFG_CHIPKILL) { + err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome); + if (err->channel < 0) { + /* + * Syndrome didn't map, so we don't know which of the + * 2 DIMMs is in error. So we need to ID 'both' of them + * as suspect. + */ + amd64_mc_warn(err->src_mci, "unknown syndrome 0x%04x - " + "possible error reporting race\n", + err->syndrome); + err->err_code = ERR_CHANNEL; + return; + } + } else { + /* + * non-chipkill ecc mode + * + * The k8 documentation is unclear about how to determine the + * channel number when using non-chipkill memory. This method + * was obtained from email communication with someone at AMD. + * (Wish the email was placed in this comment - norsk) + */ + err->channel = ((sys_addr & BIT(3)) != 0); + } +} + +static int ddr2_cs_size(unsigned i, bool dct_width) +{ + unsigned shift = 0; + + if (i <= 2) + shift = i; + else if (!(i & 0x1)) + shift = i >> 1; + else + shift = (i + 1) >> 1; + + return 128 << (shift + !!dct_width); +} + +static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr) +{ + u32 dclr = dct ? pvt->dclr1 : pvt->dclr0; + + if (pvt->ext_model >= K8_REV_F) { + WARN_ON(cs_mode > 11); + return ddr2_cs_size(cs_mode, dclr & WIDTH_128); + } + else if (pvt->ext_model >= K8_REV_D) { + unsigned diff; + WARN_ON(cs_mode > 10); + + /* + * the below calculation, besides trying to win an obfuscated C + * contest, maps cs_mode values to DIMM chip select sizes. The + * mappings are: + * + * cs_mode CS size (mb) + * ======= ============ + * 0 32 + * 1 64 + * 2 128 + * 3 128 + * 4 256 + * 5 512 + * 6 256 + * 7 512 + * 8 1024 + * 9 1024 + * 10 2048 + * + * Basically, it calculates a value with which to shift the + * smallest CS size of 32MB. + * + * ddr[23]_cs_size have a similar purpose. + */ + diff = cs_mode/3 + (unsigned)(cs_mode > 5); + + return 32 << (cs_mode - diff); + } + else { + WARN_ON(cs_mode > 6); + return 32 << cs_mode; + } +} + +/* + * Get the number of DCT channels in use. + * + * Return: + * number of Memory Channels in operation + * Pass back: + * contents of the DCL0_LOW register + */ +static int f1x_early_channel_count(struct amd64_pvt *pvt) +{ + int i, j, channels = 0; + + /* On F10h, if we are in 128 bit mode, then we are using 2 channels */ + if (pvt->fam == 0x10 && (pvt->dclr0 & WIDTH_128)) + return 2; + + /* + * Need to check if in unganged mode: In such, there are 2 channels, + * but they are not in 128 bit mode and thus the above 'dclr0' status + * bit will be OFF. + * + * Need to check DCT0[0] and DCT1[0] to see if only one of them has + * their CSEnable bit on. If so, then SINGLE DIMM case. + */ + edac_dbg(0, "Data width is not 128 bits - need more decoding\n"); + + /* + * Check DRAM Bank Address Mapping values for each DIMM to see if there + * is more than just one DIMM present in unganged mode. Need to check + * both controllers since DIMMs can be placed in either one. + */ + for (i = 0; i < 2; i++) { + u32 dbam = (i ? pvt->dbam1 : pvt->dbam0); + + for (j = 0; j < 4; j++) { + if (DBAM_DIMM(j, dbam) > 0) { + channels++; + break; + } + } + } + + if (channels > 2) + channels = 2; + + amd64_info("MCT channel count: %d\n", channels); + + return channels; +} + +static int f17_early_channel_count(struct amd64_pvt *pvt) +{ + int i, channels = 0; + + /* SDP Control bit 31 (SdpInit) is clear for unused UMC channels */ + for_each_umc(i) + channels += !!(pvt->umc[i].sdp_ctrl & UMC_SDP_INIT); + + amd64_info("MCT channel count: %d\n", channels); + + return channels; +} + +static int ddr3_cs_size(unsigned i, bool dct_width) +{ + unsigned shift = 0; + int cs_size = 0; + + if (i == 0 || i == 3 || i == 4) + cs_size = -1; + else if (i <= 2) + shift = i; + else if (i == 12) + shift = 7; + else if (!(i & 0x1)) + shift = i >> 1; + else + shift = (i + 1) >> 1; + + if (cs_size != -1) + cs_size = (128 * (1 << !!dct_width)) << shift; + + return cs_size; +} + +static int ddr3_lrdimm_cs_size(unsigned i, unsigned rank_multiply) +{ + unsigned shift = 0; + int cs_size = 0; + + if (i < 4 || i == 6) + cs_size = -1; + else if (i == 12) + shift = 7; + else if (!(i & 0x1)) + shift = i >> 1; + else + shift = (i + 1) >> 1; + + if (cs_size != -1) + cs_size = rank_multiply * (128 << shift); + + return cs_size; +} + +static int ddr4_cs_size(unsigned i) +{ + int cs_size = 0; + + if (i == 0) + cs_size = -1; + else if (i == 1) + cs_size = 1024; + else + /* Min cs_size = 1G */ + cs_size = 1024 * (1 << (i >> 1)); + + return cs_size; +} + +static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr) +{ + u32 dclr = dct ? pvt->dclr1 : pvt->dclr0; + + WARN_ON(cs_mode > 11); + + if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE) + return ddr3_cs_size(cs_mode, dclr & WIDTH_128); + else + return ddr2_cs_size(cs_mode, dclr & WIDTH_128); +} + +/* + * F15h supports only 64bit DCT interfaces + */ +static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr) +{ + WARN_ON(cs_mode > 12); + + return ddr3_cs_size(cs_mode, false); +} + +/* F15h M60h supports DDR4 mapping as well.. */ +static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr) +{ + int cs_size; + u32 dcsm = pvt->csels[dct].csmasks[cs_mask_nr]; + + WARN_ON(cs_mode > 12); + + if (pvt->dram_type == MEM_DDR4) { + if (cs_mode > 9) + return -1; + + cs_size = ddr4_cs_size(cs_mode); + } else if (pvt->dram_type == MEM_LRDDR3) { + unsigned rank_multiply = dcsm & 0xf; + + if (rank_multiply == 3) + rank_multiply = 4; + cs_size = ddr3_lrdimm_cs_size(cs_mode, rank_multiply); + } else { + /* Minimum cs size is 512mb for F15hM60h*/ + if (cs_mode == 0x1) + return -1; + + cs_size = ddr3_cs_size(cs_mode, false); + } + + return cs_size; +} + +/* + * F16h and F15h model 30h have only limited cs_modes. + */ +static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr) +{ + WARN_ON(cs_mode > 12); + + if (cs_mode == 6 || cs_mode == 8 || + cs_mode == 9 || cs_mode == 12) + return -1; + else + return ddr3_cs_size(cs_mode, false); +} + +static int f17_addr_mask_to_cs_size(struct amd64_pvt *pvt, u8 umc, + unsigned int cs_mode, int csrow_nr) +{ + u32 addr_mask_orig, addr_mask_deinterleaved; + u32 msb, weight, num_zero_bits; + int cs_mask_nr = csrow_nr; + int dimm, size = 0; + + /* No Chip Selects are enabled. */ + if (!cs_mode) + return size; + + /* Requested size of an even CS but none are enabled. */ + if (!(cs_mode & CS_EVEN) && !(csrow_nr & 1)) + return size; + + /* Requested size of an odd CS but none are enabled. */ + if (!(cs_mode & CS_ODD) && (csrow_nr & 1)) + return size; + + /* + * Family 17h introduced systems with one mask per DIMM, + * and two Chip Selects per DIMM. + * + * CS0 and CS1 -> MASK0 / DIMM0 + * CS2 and CS3 -> MASK1 / DIMM1 + * + * Family 19h Model 10h introduced systems with one mask per Chip Select, + * and two Chip Selects per DIMM. + * + * CS0 -> MASK0 -> DIMM0 + * CS1 -> MASK1 -> DIMM0 + * CS2 -> MASK2 -> DIMM1 + * CS3 -> MASK3 -> DIMM1 + * + * Keep the mask number equal to the Chip Select number for newer systems, + * and shift the mask number for older systems. + */ + dimm = csrow_nr >> 1; + + if (!fam_type->flags.zn_regs_v2) + cs_mask_nr >>= 1; + + /* Asymmetric dual-rank DIMM support. */ + if ((csrow_nr & 1) && (cs_mode & CS_ODD_SECONDARY)) + addr_mask_orig = pvt->csels[umc].csmasks_sec[cs_mask_nr]; + else + addr_mask_orig = pvt->csels[umc].csmasks[cs_mask_nr]; + + /* + * The number of zero bits in the mask is equal to the number of bits + * in a full mask minus the number of bits in the current mask. + * + * The MSB is the number of bits in the full mask because BIT[0] is + * always 0. + * + * In the special 3 Rank interleaving case, a single bit is flipped + * without swapping with the most significant bit. This can be handled + * by keeping the MSB where it is and ignoring the single zero bit. + */ + msb = fls(addr_mask_orig) - 1; + weight = hweight_long(addr_mask_orig); + num_zero_bits = msb - weight - !!(cs_mode & CS_3R_INTERLEAVE); + + /* Take the number of zero bits off from the top of the mask. */ + addr_mask_deinterleaved = GENMASK_ULL(msb - num_zero_bits, 1); + + edac_dbg(1, "CS%d DIMM%d AddrMasks:\n", csrow_nr, dimm); + edac_dbg(1, " Original AddrMask: 0x%x\n", addr_mask_orig); + edac_dbg(1, " Deinterleaved AddrMask: 0x%x\n", addr_mask_deinterleaved); + + /* Register [31:1] = Address [39:9]. Size is in kBs here. */ + size = (addr_mask_deinterleaved >> 2) + 1; + + /* Return size in MBs. */ + return size >> 10; +} + +static void read_dram_ctl_register(struct amd64_pvt *pvt) +{ + + if (pvt->fam == 0xf) + return; + + if (!amd64_read_pci_cfg(pvt->F2, DCT_SEL_LO, &pvt->dct_sel_lo)) { + edac_dbg(0, "F2x110 (DCTSelLow): 0x%08x, High range addrs at: 0x%x\n", + pvt->dct_sel_lo, dct_sel_baseaddr(pvt)); + + edac_dbg(0, " DCTs operate in %s mode\n", + (dct_ganging_enabled(pvt) ? "ganged" : "unganged")); + + if (!dct_ganging_enabled(pvt)) + edac_dbg(0, " Address range split per DCT: %s\n", + (dct_high_range_enabled(pvt) ? "yes" : "no")); + + edac_dbg(0, " data interleave for ECC: %s, DRAM cleared since last warm reset: %s\n", + (dct_data_intlv_enabled(pvt) ? "enabled" : "disabled"), + (dct_memory_cleared(pvt) ? "yes" : "no")); + + edac_dbg(0, " channel interleave: %s, " + "interleave bits selector: 0x%x\n", + (dct_interleave_enabled(pvt) ? "enabled" : "disabled"), + dct_sel_interleave_addr(pvt)); + } + + amd64_read_pci_cfg(pvt->F2, DCT_SEL_HI, &pvt->dct_sel_hi); +} + +/* + * Determine channel (DCT) based on the interleaving mode (see F15h M30h BKDG, + * 2.10.12 Memory Interleaving Modes). + */ +static u8 f15_m30h_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, + u8 intlv_en, int num_dcts_intlv, + u32 dct_sel) +{ + u8 channel = 0; + u8 select; + + if (!(intlv_en)) + return (u8)(dct_sel); + + if (num_dcts_intlv == 2) { + select = (sys_addr >> 8) & 0x3; + channel = select ? 0x3 : 0; + } else if (num_dcts_intlv == 4) { + u8 intlv_addr = dct_sel_interleave_addr(pvt); + switch (intlv_addr) { + case 0x4: + channel = (sys_addr >> 8) & 0x3; + break; + case 0x5: + channel = (sys_addr >> 9) & 0x3; + break; + } + } + return channel; +} + +/* + * Determine channel (DCT) based on the interleaving mode: F10h BKDG, 2.8.9 Memory + * Interleaving Modes. + */ +static u8 f1x_determine_channel(struct amd64_pvt *pvt, u64 sys_addr, + bool hi_range_sel, u8 intlv_en) +{ + u8 dct_sel_high = (pvt->dct_sel_lo >> 1) & 1; + + if (dct_ganging_enabled(pvt)) + return 0; + + if (hi_range_sel) + return dct_sel_high; + + /* + * see F2x110[DctSelIntLvAddr] - channel interleave mode + */ + if (dct_interleave_enabled(pvt)) { + u8 intlv_addr = dct_sel_interleave_addr(pvt); + + /* return DCT select function: 0=DCT0, 1=DCT1 */ + if (!intlv_addr) + return sys_addr >> 6 & 1; + + if (intlv_addr & 0x2) { + u8 shift = intlv_addr & 0x1 ? 9 : 6; + u32 temp = hweight_long((u32) ((sys_addr >> 16) & 0x1F)) & 1; + + return ((sys_addr >> shift) & 1) ^ temp; + } + + if (intlv_addr & 0x4) { + u8 shift = intlv_addr & 0x1 ? 9 : 8; + + return (sys_addr >> shift) & 1; + } + + return (sys_addr >> (12 + hweight8(intlv_en))) & 1; + } + + if (dct_high_range_enabled(pvt)) + return ~dct_sel_high & 1; + + return 0; +} + +/* Convert the sys_addr to the normalized DCT address */ +static u64 f1x_get_norm_dct_addr(struct amd64_pvt *pvt, u8 range, + u64 sys_addr, bool hi_rng, + u32 dct_sel_base_addr) +{ + u64 chan_off; + u64 dram_base = get_dram_base(pvt, range); + u64 hole_off = f10_dhar_offset(pvt); + u64 dct_sel_base_off = (u64)(pvt->dct_sel_hi & 0xFFFFFC00) << 16; + + if (hi_rng) { + /* + * if + * base address of high range is below 4Gb + * (bits [47:27] at [31:11]) + * DRAM address space on this DCT is hoisted above 4Gb && + * sys_addr > 4Gb + * + * remove hole offset from sys_addr + * else + * remove high range offset from sys_addr + */ + if ((!(dct_sel_base_addr >> 16) || + dct_sel_base_addr < dhar_base(pvt)) && + dhar_valid(pvt) && + (sys_addr >= BIT_64(32))) + chan_off = hole_off; + else + chan_off = dct_sel_base_off; + } else { + /* + * if + * we have a valid hole && + * sys_addr > 4Gb + * + * remove hole + * else + * remove dram base to normalize to DCT address + */ + if (dhar_valid(pvt) && (sys_addr >= BIT_64(32))) + chan_off = hole_off; + else + chan_off = dram_base; + } + + return (sys_addr & GENMASK_ULL(47,6)) - (chan_off & GENMASK_ULL(47,23)); +} + +/* + * checks if the csrow passed in is marked as SPARED, if so returns the new + * spare row + */ +static int f10_process_possible_spare(struct amd64_pvt *pvt, u8 dct, int csrow) +{ + int tmp_cs; + + if (online_spare_swap_done(pvt, dct) && + csrow == online_spare_bad_dramcs(pvt, dct)) { + + for_each_chip_select(tmp_cs, dct, pvt) { + if (chip_select_base(tmp_cs, dct, pvt) & 0x2) { + csrow = tmp_cs; + break; + } + } + } + return csrow; +} + +/* + * Iterate over the DRAM DCT "base" and "mask" registers looking for a + * SystemAddr match on the specified 'ChannelSelect' and 'NodeID' + * + * Return: + * -EINVAL: NOT FOUND + * 0..csrow = Chip-Select Row + */ +static int f1x_lookup_addr_in_dct(u64 in_addr, u8 nid, u8 dct) +{ + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + u64 cs_base, cs_mask; + int cs_found = -EINVAL; + int csrow; + + mci = edac_mc_find(nid); + if (!mci) + return cs_found; + + pvt = mci->pvt_info; + + edac_dbg(1, "input addr: 0x%llx, DCT: %d\n", in_addr, dct); + + for_each_chip_select(csrow, dct, pvt) { + if (!csrow_enabled(csrow, dct, pvt)) + continue; + + get_cs_base_and_mask(pvt, csrow, dct, &cs_base, &cs_mask); + + edac_dbg(1, " CSROW=%d CSBase=0x%llx CSMask=0x%llx\n", + csrow, cs_base, cs_mask); + + cs_mask = ~cs_mask; + + edac_dbg(1, " (InputAddr & ~CSMask)=0x%llx (CSBase & ~CSMask)=0x%llx\n", + (in_addr & cs_mask), (cs_base & cs_mask)); + + if ((in_addr & cs_mask) == (cs_base & cs_mask)) { + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + cs_found = csrow; + break; + } + cs_found = f10_process_possible_spare(pvt, dct, csrow); + + edac_dbg(1, " MATCH csrow=%d\n", cs_found); + break; + } + } + return cs_found; +} + +/* + * See F2x10C. Non-interleaved graphics framebuffer memory under the 16G is + * swapped with a region located at the bottom of memory so that the GPU can use + * the interleaved region and thus two channels. + */ +static u64 f1x_swap_interleaved_region(struct amd64_pvt *pvt, u64 sys_addr) +{ + u32 swap_reg, swap_base, swap_limit, rgn_size, tmp_addr; + + if (pvt->fam == 0x10) { + /* only revC3 and revE have that feature */ + if (pvt->model < 4 || (pvt->model < 0xa && pvt->stepping < 3)) + return sys_addr; + } + + amd64_read_pci_cfg(pvt->F2, SWAP_INTLV_REG, &swap_reg); + + if (!(swap_reg & 0x1)) + return sys_addr; + + swap_base = (swap_reg >> 3) & 0x7f; + swap_limit = (swap_reg >> 11) & 0x7f; + rgn_size = (swap_reg >> 20) & 0x7f; + tmp_addr = sys_addr >> 27; + + if (!(sys_addr >> 34) && + (((tmp_addr >= swap_base) && + (tmp_addr <= swap_limit)) || + (tmp_addr < rgn_size))) + return sys_addr ^ (u64)swap_base << 27; + + return sys_addr; +} + +/* For a given @dram_range, check if @sys_addr falls within it. */ +static int f1x_match_to_this_node(struct amd64_pvt *pvt, unsigned range, + u64 sys_addr, int *chan_sel) +{ + int cs_found = -EINVAL; + u64 chan_addr; + u32 dct_sel_base; + u8 channel; + bool high_range = false; + + u8 node_id = dram_dst_node(pvt, range); + u8 intlv_en = dram_intlv_en(pvt, range); + u32 intlv_sel = dram_intlv_sel(pvt, range); + + edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n", + range, sys_addr, get_dram_limit(pvt, range)); + + if (dhar_valid(pvt) && + dhar_base(pvt) <= sys_addr && + sys_addr < BIT_64(32)) { + amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n", + sys_addr); + return -EINVAL; + } + + if (intlv_en && (intlv_sel != ((sys_addr >> 12) & intlv_en))) + return -EINVAL; + + sys_addr = f1x_swap_interleaved_region(pvt, sys_addr); + + dct_sel_base = dct_sel_baseaddr(pvt); + + /* + * check whether addresses >= DctSelBaseAddr[47:27] are to be used to + * select between DCT0 and DCT1. + */ + if (dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt) && + ((sys_addr >> 27) >= (dct_sel_base >> 11))) + high_range = true; + + channel = f1x_determine_channel(pvt, sys_addr, high_range, intlv_en); + + chan_addr = f1x_get_norm_dct_addr(pvt, range, sys_addr, + high_range, dct_sel_base); + + /* Remove node interleaving, see F1x120 */ + if (intlv_en) + chan_addr = ((chan_addr >> (12 + hweight8(intlv_en))) << 12) | + (chan_addr & 0xfff); + + /* remove channel interleave */ + if (dct_interleave_enabled(pvt) && + !dct_high_range_enabled(pvt) && + !dct_ganging_enabled(pvt)) { + + if (dct_sel_interleave_addr(pvt) != 1) { + if (dct_sel_interleave_addr(pvt) == 0x3) + /* hash 9 */ + chan_addr = ((chan_addr >> 10) << 9) | + (chan_addr & 0x1ff); + else + /* A[6] or hash 6 */ + chan_addr = ((chan_addr >> 7) << 6) | + (chan_addr & 0x3f); + } else + /* A[12] */ + chan_addr = ((chan_addr >> 13) << 12) | + (chan_addr & 0xfff); + } + + edac_dbg(1, " Normalized DCT addr: 0x%llx\n", chan_addr); + + cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, channel); + + if (cs_found >= 0) + *chan_sel = channel; + + return cs_found; +} + +static int f15_m30h_match_to_this_node(struct amd64_pvt *pvt, unsigned range, + u64 sys_addr, int *chan_sel) +{ + int cs_found = -EINVAL; + int num_dcts_intlv = 0; + u64 chan_addr, chan_offset; + u64 dct_base, dct_limit; + u32 dct_cont_base_reg, dct_cont_limit_reg, tmp; + u8 channel, alias_channel, leg_mmio_hole, dct_sel, dct_offset_en; + + u64 dhar_offset = f10_dhar_offset(pvt); + u8 intlv_addr = dct_sel_interleave_addr(pvt); + u8 node_id = dram_dst_node(pvt, range); + u8 intlv_en = dram_intlv_en(pvt, range); + + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &dct_cont_base_reg); + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &dct_cont_limit_reg); + + dct_offset_en = (u8) ((dct_cont_base_reg >> 3) & BIT(0)); + dct_sel = (u8) ((dct_cont_base_reg >> 4) & 0x7); + + edac_dbg(1, "(range %d) SystemAddr= 0x%llx Limit=0x%llx\n", + range, sys_addr, get_dram_limit(pvt, range)); + + if (!(get_dram_base(pvt, range) <= sys_addr) && + !(get_dram_limit(pvt, range) >= sys_addr)) + return -EINVAL; + + if (dhar_valid(pvt) && + dhar_base(pvt) <= sys_addr && + sys_addr < BIT_64(32)) { + amd64_warn("Huh? Address is in the MMIO hole: 0x%016llx\n", + sys_addr); + return -EINVAL; + } + + /* Verify sys_addr is within DCT Range. */ + dct_base = (u64) dct_sel_baseaddr(pvt); + dct_limit = (dct_cont_limit_reg >> 11) & 0x1FFF; + + if (!(dct_cont_base_reg & BIT(0)) && + !(dct_base <= (sys_addr >> 27) && + dct_limit >= (sys_addr >> 27))) + return -EINVAL; + + /* Verify number of dct's that participate in channel interleaving. */ + num_dcts_intlv = (int) hweight8(intlv_en); + + if (!(num_dcts_intlv % 2 == 0) || (num_dcts_intlv > 4)) + return -EINVAL; + + if (pvt->model >= 0x60) + channel = f1x_determine_channel(pvt, sys_addr, false, intlv_en); + else + channel = f15_m30h_determine_channel(pvt, sys_addr, intlv_en, + num_dcts_intlv, dct_sel); + + /* Verify we stay within the MAX number of channels allowed */ + if (channel > 3) + return -EINVAL; + + leg_mmio_hole = (u8) (dct_cont_base_reg >> 1 & BIT(0)); + + /* Get normalized DCT addr */ + if (leg_mmio_hole && (sys_addr >= BIT_64(32))) + chan_offset = dhar_offset; + else + chan_offset = dct_base << 27; + + chan_addr = sys_addr - chan_offset; + + /* remove channel interleave */ + if (num_dcts_intlv == 2) { + if (intlv_addr == 0x4) + chan_addr = ((chan_addr >> 9) << 8) | + (chan_addr & 0xff); + else if (intlv_addr == 0x5) + chan_addr = ((chan_addr >> 10) << 9) | + (chan_addr & 0x1ff); + else + return -EINVAL; + + } else if (num_dcts_intlv == 4) { + if (intlv_addr == 0x4) + chan_addr = ((chan_addr >> 10) << 8) | + (chan_addr & 0xff); + else if (intlv_addr == 0x5) + chan_addr = ((chan_addr >> 11) << 9) | + (chan_addr & 0x1ff); + else + return -EINVAL; + } + + if (dct_offset_en) { + amd64_read_pci_cfg(pvt->F1, + DRAM_CONT_HIGH_OFF + (int) channel * 4, + &tmp); + chan_addr += (u64) ((tmp >> 11) & 0xfff) << 27; + } + + f15h_select_dct(pvt, channel); + + edac_dbg(1, " Normalized DCT addr: 0x%llx\n", chan_addr); + + /* + * Find Chip select: + * if channel = 3, then alias it to 1. This is because, in F15 M30h, + * there is support for 4 DCT's, but only 2 are currently functional. + * They are DCT0 and DCT3. But we have read all registers of DCT3 into + * pvt->csels[1]. So we need to use '1' here to get correct info. + * Refer F15 M30h BKDG Section 2.10 and 2.10.3 for clarifications. + */ + alias_channel = (channel == 3) ? 1 : channel; + + cs_found = f1x_lookup_addr_in_dct(chan_addr, node_id, alias_channel); + + if (cs_found >= 0) + *chan_sel = alias_channel; + + return cs_found; +} + +static int f1x_translate_sysaddr_to_cs(struct amd64_pvt *pvt, + u64 sys_addr, + int *chan_sel) +{ + int cs_found = -EINVAL; + unsigned range; + + for (range = 0; range < DRAM_RANGES; range++) { + if (!dram_rw(pvt, range)) + continue; + + if (pvt->fam == 0x15 && pvt->model >= 0x30) + cs_found = f15_m30h_match_to_this_node(pvt, range, + sys_addr, + chan_sel); + + else if ((get_dram_base(pvt, range) <= sys_addr) && + (get_dram_limit(pvt, range) >= sys_addr)) { + cs_found = f1x_match_to_this_node(pvt, range, + sys_addr, chan_sel); + if (cs_found >= 0) + break; + } + } + return cs_found; +} + +/* + * For reference see "2.8.5 Routing DRAM Requests" in F10 BKDG. This code maps + * a @sys_addr to NodeID, DCT (channel) and chip select (CSROW). + * + * The @sys_addr is usually an error address received from the hardware + * (MCX_ADDR). + */ +static void f1x_map_sysaddr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr, + struct err_info *err) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + error_address_to_page_and_offset(sys_addr, err); + + err->csrow = f1x_translate_sysaddr_to_cs(pvt, sys_addr, &err->channel); + if (err->csrow < 0) { + err->err_code = ERR_CSROW; + return; + } + + /* + * We need the syndromes for channel detection only when we're + * ganged. Otherwise @chan should already contain the channel at + * this point. + */ + if (dct_ganging_enabled(pvt)) + err->channel = get_channel_from_ecc_syndrome(mci, err->syndrome); +} + +/* + * debug routine to display the memory sizes of all logical DIMMs and its + * CSROWs + */ +static void debug_display_dimm_sizes(struct amd64_pvt *pvt, u8 ctrl) +{ + int dimm, size0, size1; + u32 *dcsb = ctrl ? pvt->csels[1].csbases : pvt->csels[0].csbases; + u32 dbam = ctrl ? pvt->dbam1 : pvt->dbam0; + + if (pvt->fam == 0xf) { + /* K8 families < revF not supported yet */ + if (pvt->ext_model < K8_REV_F) + return; + else + WARN_ON(ctrl != 0); + } + + if (pvt->fam == 0x10) { + dbam = (ctrl && !dct_ganging_enabled(pvt)) ? pvt->dbam1 + : pvt->dbam0; + dcsb = (ctrl && !dct_ganging_enabled(pvt)) ? + pvt->csels[1].csbases : + pvt->csels[0].csbases; + } else if (ctrl) { + dbam = pvt->dbam0; + dcsb = pvt->csels[1].csbases; + } + edac_dbg(1, "F2x%d80 (DRAM Bank Address Mapping): 0x%08x\n", + ctrl, dbam); + + edac_printk(KERN_DEBUG, EDAC_MC, "DCT%d chip selects:\n", ctrl); + + /* Dump memory sizes for DIMM and its CSROWs */ + for (dimm = 0; dimm < 4; dimm++) { + + size0 = 0; + if (dcsb[dimm*2] & DCSB_CS_ENABLE) + /* + * For F15m60h, we need multiplier for LRDIMM cs_size + * calculation. We pass dimm value to the dbam_to_cs + * mapper so we can find the multiplier from the + * corresponding DCSM. + */ + size0 = pvt->ops->dbam_to_cs(pvt, ctrl, + DBAM_DIMM(dimm, dbam), + dimm); + + size1 = 0; + if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE) + size1 = pvt->ops->dbam_to_cs(pvt, ctrl, + DBAM_DIMM(dimm, dbam), + dimm); + + amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n", + dimm * 2, size0, + dimm * 2 + 1, size1); + } +} + +static struct amd64_family_type family_types[] = { + [K8_CPUS] = { + .ctl_name = "K8", + .f1_id = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP, + .f2_id = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL, + .max_mcs = 2, + .ops = { + .early_channel_count = k8_early_channel_count, + .map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow, + .dbam_to_cs = k8_dbam_to_chip_select, + } + }, + [F10_CPUS] = { + .ctl_name = "F10h", + .f1_id = PCI_DEVICE_ID_AMD_10H_NB_MAP, + .f2_id = PCI_DEVICE_ID_AMD_10H_NB_DRAM, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f10_dbam_to_chip_select, + } + }, + [F15_CPUS] = { + .ctl_name = "F15h", + .f1_id = PCI_DEVICE_ID_AMD_15H_NB_F1, + .f2_id = PCI_DEVICE_ID_AMD_15H_NB_F2, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f15_dbam_to_chip_select, + } + }, + [F15_M30H_CPUS] = { + .ctl_name = "F15h_M30h", + .f1_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1, + .f2_id = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f16_dbam_to_chip_select, + } + }, + [F15_M60H_CPUS] = { + .ctl_name = "F15h_M60h", + .f1_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1, + .f2_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F2, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f15_m60h_dbam_to_chip_select, + } + }, + [F16_CPUS] = { + .ctl_name = "F16h", + .f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1, + .f2_id = PCI_DEVICE_ID_AMD_16H_NB_F2, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f16_dbam_to_chip_select, + } + }, + [F16_M30H_CPUS] = { + .ctl_name = "F16h_M30h", + .f1_id = PCI_DEVICE_ID_AMD_16H_M30H_NB_F1, + .f2_id = PCI_DEVICE_ID_AMD_16H_M30H_NB_F2, + .max_mcs = 2, + .ops = { + .early_channel_count = f1x_early_channel_count, + .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow, + .dbam_to_cs = f16_dbam_to_chip_select, + } + }, + [F17_CPUS] = { + .ctl_name = "F17h", + .f0_id = PCI_DEVICE_ID_AMD_17H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_DF_F6, + .max_mcs = 2, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F17_M10H_CPUS] = { + .ctl_name = "F17h_M10h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M10H_DF_F6, + .max_mcs = 2, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F17_M30H_CPUS] = { + .ctl_name = "F17h_M30h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M30H_DF_F6, + .max_mcs = 8, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F17_M60H_CPUS] = { + .ctl_name = "F17h_M60h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M60H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M60H_DF_F6, + .max_mcs = 2, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F17_M70H_CPUS] = { + .ctl_name = "F17h_M70h", + .f0_id = PCI_DEVICE_ID_AMD_17H_M70H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_17H_M70H_DF_F6, + .max_mcs = 2, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F19_CPUS] = { + .ctl_name = "F19h", + .f0_id = PCI_DEVICE_ID_AMD_19H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_19H_DF_F6, + .max_mcs = 8, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F19_M10H_CPUS] = { + .ctl_name = "F19h_M10h", + .f0_id = PCI_DEVICE_ID_AMD_19H_M10H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_19H_M10H_DF_F6, + .max_mcs = 12, + .flags.zn_regs_v2 = 1, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, + [F19_M50H_CPUS] = { + .ctl_name = "F19h_M50h", + .f0_id = PCI_DEVICE_ID_AMD_19H_M50H_DF_F0, + .f6_id = PCI_DEVICE_ID_AMD_19H_M50H_DF_F6, + .max_mcs = 2, + .ops = { + .early_channel_count = f17_early_channel_count, + .dbam_to_cs = f17_addr_mask_to_cs_size, + } + }, +}; + +/* + * These are tables of eigenvectors (one per line) which can be used for the + * construction of the syndrome tables. The modified syndrome search algorithm + * uses those to find the symbol in error and thus the DIMM. + * + * Algorithm courtesy of Ross LaFetra from AMD. + */ +static const u16 x4_vectors[] = { + 0x2f57, 0x1afe, 0x66cc, 0xdd88, + 0x11eb, 0x3396, 0x7f4c, 0xeac8, + 0x0001, 0x0002, 0x0004, 0x0008, + 0x1013, 0x3032, 0x4044, 0x8088, + 0x106b, 0x30d6, 0x70fc, 0xe0a8, + 0x4857, 0xc4fe, 0x13cc, 0x3288, + 0x1ac5, 0x2f4a, 0x5394, 0xa1e8, + 0x1f39, 0x251e, 0xbd6c, 0x6bd8, + 0x15c1, 0x2a42, 0x89ac, 0x4758, + 0x2b03, 0x1602, 0x4f0c, 0xca08, + 0x1f07, 0x3a0e, 0x6b04, 0xbd08, + 0x8ba7, 0x465e, 0x244c, 0x1cc8, + 0x2b87, 0x164e, 0x642c, 0xdc18, + 0x40b9, 0x80de, 0x1094, 0x20e8, + 0x27db, 0x1eb6, 0x9dac, 0x7b58, + 0x11c1, 0x2242, 0x84ac, 0x4c58, + 0x1be5, 0x2d7a, 0x5e34, 0xa718, + 0x4b39, 0x8d1e, 0x14b4, 0x28d8, + 0x4c97, 0xc87e, 0x11fc, 0x33a8, + 0x8e97, 0x497e, 0x2ffc, 0x1aa8, + 0x16b3, 0x3d62, 0x4f34, 0x8518, + 0x1e2f, 0x391a, 0x5cac, 0xf858, + 0x1d9f, 0x3b7a, 0x572c, 0xfe18, + 0x15f5, 0x2a5a, 0x5264, 0xa3b8, + 0x1dbb, 0x3b66, 0x715c, 0xe3f8, + 0x4397, 0xc27e, 0x17fc, 0x3ea8, + 0x1617, 0x3d3e, 0x6464, 0xb8b8, + 0x23ff, 0x12aa, 0xab6c, 0x56d8, + 0x2dfb, 0x1ba6, 0x913c, 0x7328, + 0x185d, 0x2ca6, 0x7914, 0x9e28, + 0x171b, 0x3e36, 0x7d7c, 0xebe8, + 0x4199, 0x82ee, 0x19f4, 0x2e58, + 0x4807, 0xc40e, 0x130c, 0x3208, + 0x1905, 0x2e0a, 0x5804, 0xac08, + 0x213f, 0x132a, 0xadfc, 0x5ba8, + 0x19a9, 0x2efe, 0xb5cc, 0x6f88, +}; + +static const u16 x8_vectors[] = { + 0x0145, 0x028a, 0x2374, 0x43c8, 0xa1f0, 0x0520, 0x0a40, 0x1480, + 0x0211, 0x0422, 0x0844, 0x1088, 0x01b0, 0x44e0, 0x23c0, 0xed80, + 0x1011, 0x0116, 0x022c, 0x0458, 0x08b0, 0x8c60, 0x2740, 0x4e80, + 0x0411, 0x0822, 0x1044, 0x0158, 0x02b0, 0x2360, 0x46c0, 0xab80, + 0x0811, 0x1022, 0x012c, 0x0258, 0x04b0, 0x4660, 0x8cc0, 0x2780, + 0x2071, 0x40e2, 0xa0c4, 0x0108, 0x0210, 0x0420, 0x0840, 0x1080, + 0x4071, 0x80e2, 0x0104, 0x0208, 0x0410, 0x0820, 0x1040, 0x2080, + 0x8071, 0x0102, 0x0204, 0x0408, 0x0810, 0x1020, 0x2040, 0x4080, + 0x019d, 0x03d6, 0x136c, 0x2198, 0x50b0, 0xb2e0, 0x0740, 0x0e80, + 0x0189, 0x03ea, 0x072c, 0x0e58, 0x1cb0, 0x56e0, 0x37c0, 0xf580, + 0x01fd, 0x0376, 0x06ec, 0x0bb8, 0x1110, 0x2220, 0x4440, 0x8880, + 0x0163, 0x02c6, 0x1104, 0x0758, 0x0eb0, 0x2be0, 0x6140, 0xc280, + 0x02fd, 0x01c6, 0x0b5c, 0x1108, 0x07b0, 0x25a0, 0x8840, 0x6180, + 0x0801, 0x012e, 0x025c, 0x04b8, 0x1370, 0x26e0, 0x57c0, 0xb580, + 0x0401, 0x0802, 0x015c, 0x02b8, 0x22b0, 0x13e0, 0x7140, 0xe280, + 0x0201, 0x0402, 0x0804, 0x01b8, 0x11b0, 0x31a0, 0x8040, 0x7180, + 0x0101, 0x0202, 0x0404, 0x0808, 0x1010, 0x2020, 0x4040, 0x8080, + 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080, + 0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000, 0x8000, +}; + +static int decode_syndrome(u16 syndrome, const u16 *vectors, unsigned num_vecs, + unsigned v_dim) +{ + unsigned int i, err_sym; + + for (err_sym = 0; err_sym < num_vecs / v_dim; err_sym++) { + u16 s = syndrome; + unsigned v_idx = err_sym * v_dim; + unsigned v_end = (err_sym + 1) * v_dim; + + /* walk over all 16 bits of the syndrome */ + for (i = 1; i < (1U << 16); i <<= 1) { + + /* if bit is set in that eigenvector... */ + if (v_idx < v_end && vectors[v_idx] & i) { + u16 ev_comp = vectors[v_idx++]; + + /* ... and bit set in the modified syndrome, */ + if (s & i) { + /* remove it. */ + s ^= ev_comp; + + if (!s) + return err_sym; + } + + } else if (s & i) + /* can't get to zero, move to next symbol */ + break; + } + } + + edac_dbg(0, "syndrome(%x) not found\n", syndrome); + return -1; +} + +static int map_err_sym_to_channel(int err_sym, int sym_size) +{ + if (sym_size == 4) + switch (err_sym) { + case 0x20: + case 0x21: + return 0; + case 0x22: + case 0x23: + return 1; + default: + return err_sym >> 4; + } + /* x8 symbols */ + else + switch (err_sym) { + /* imaginary bits not in a DIMM */ + case 0x10: + WARN(1, KERN_ERR "Invalid error symbol: 0x%x\n", + err_sym); + return -1; + case 0x11: + return 0; + case 0x12: + return 1; + default: + return err_sym >> 3; + } + return -1; +} + +static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome) +{ + struct amd64_pvt *pvt = mci->pvt_info; + int err_sym = -1; + + if (pvt->ecc_sym_sz == 8) + err_sym = decode_syndrome(syndrome, x8_vectors, + ARRAY_SIZE(x8_vectors), + pvt->ecc_sym_sz); + else if (pvt->ecc_sym_sz == 4) + err_sym = decode_syndrome(syndrome, x4_vectors, + ARRAY_SIZE(x4_vectors), + pvt->ecc_sym_sz); + else { + amd64_warn("Illegal syndrome type: %u\n", pvt->ecc_sym_sz); + return err_sym; + } + + return map_err_sym_to_channel(err_sym, pvt->ecc_sym_sz); +} + +static void __log_ecc_error(struct mem_ctl_info *mci, struct err_info *err, + u8 ecc_type) +{ + enum hw_event_mc_err_type err_type; + const char *string; + + if (ecc_type == 2) + err_type = HW_EVENT_ERR_CORRECTED; + else if (ecc_type == 1) + err_type = HW_EVENT_ERR_UNCORRECTED; + else if (ecc_type == 3) + err_type = HW_EVENT_ERR_DEFERRED; + else { + WARN(1, "Something is rotten in the state of Denmark.\n"); + return; + } + + switch (err->err_code) { + case DECODE_OK: + string = ""; + break; + case ERR_NODE: + string = "Failed to map error addr to a node"; + break; + case ERR_CSROW: + string = "Failed to map error addr to a csrow"; + break; + case ERR_CHANNEL: + string = "Unknown syndrome - possible error reporting race"; + break; + case ERR_SYND: + string = "MCA_SYND not valid - unknown syndrome and csrow"; + break; + case ERR_NORM_ADDR: + string = "Cannot decode normalized address"; + break; + default: + string = "WTF error"; + break; + } + + edac_mc_handle_error(err_type, mci, 1, + err->page, err->offset, err->syndrome, + err->csrow, err->channel, -1, + string, ""); +} + +static inline void decode_bus_error(int node_id, struct mce *m) +{ + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + u8 ecc_type = (m->status >> 45) & 0x3; + u8 xec = XEC(m->status, 0x1f); + u16 ec = EC(m->status); + u64 sys_addr; + struct err_info err; + + mci = edac_mc_find(node_id); + if (!mci) + return; + + pvt = mci->pvt_info; + + /* Bail out early if this was an 'observed' error */ + if (PP(ec) == NBSL_PP_OBS) + return; + + /* Do only ECC errors */ + if (xec && xec != F10_NBSL_EXT_ERR_ECC) + return; + + memset(&err, 0, sizeof(err)); + + sys_addr = get_error_address(pvt, m); + + if (ecc_type == 2) + err.syndrome = extract_syndrome(m->status); + + pvt->ops->map_sysaddr_to_csrow(mci, sys_addr, &err); + + __log_ecc_error(mci, &err, ecc_type); +} + +/* + * To find the UMC channel represented by this bank we need to match on its + * instance_id. The instance_id of a bank is held in the lower 32 bits of its + * IPID. + * + * Currently, we can derive the channel number by looking at the 6th nibble in + * the instance_id. For example, instance_id=0xYXXXXX where Y is the channel + * number. + */ +static int find_umc_channel(struct mce *m) +{ + return (m->ipid & GENMASK(31, 0)) >> 20; +} + +static void decode_umc_error(int node_id, struct mce *m) +{ + u8 ecc_type = (m->status >> 45) & 0x3; + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + struct err_info err; + u64 sys_addr; + + mci = edac_mc_find(node_id); + if (!mci) + return; + + pvt = mci->pvt_info; + + memset(&err, 0, sizeof(err)); + + if (m->status & MCI_STATUS_DEFERRED) + ecc_type = 3; + + err.channel = find_umc_channel(m); + + if (!(m->status & MCI_STATUS_SYNDV)) { + err.err_code = ERR_SYND; + goto log_error; + } + + if (ecc_type == 2) { + u8 length = (m->synd >> 18) & 0x3f; + + if (length) + err.syndrome = (m->synd >> 32) & GENMASK(length - 1, 0); + else + err.err_code = ERR_CHANNEL; + } + + err.csrow = m->synd & 0x7; + + if (umc_normaddr_to_sysaddr(m->addr, pvt->mc_node_id, err.channel, &sys_addr)) { + err.err_code = ERR_NORM_ADDR; + goto log_error; + } + + error_address_to_page_and_offset(sys_addr, &err); + +log_error: + __log_ecc_error(mci, &err, ecc_type); +} + +/* + * Use pvt->F3 which contains the F3 CPU PCI device to get the related + * F1 (AddrMap) and F2 (Dct) devices. Return negative value on error. + * Reserve F0 and F6 on systems with a UMC. + */ +static int +reserve_mc_sibling_devs(struct amd64_pvt *pvt, u16 pci_id1, u16 pci_id2) +{ + if (pvt->umc) { + pvt->F0 = pci_get_related_function(pvt->F3->vendor, pci_id1, pvt->F3); + if (!pvt->F0) { + edac_dbg(1, "F0 not found, device 0x%x\n", pci_id1); + return -ENODEV; + } + + pvt->F6 = pci_get_related_function(pvt->F3->vendor, pci_id2, pvt->F3); + if (!pvt->F6) { + pci_dev_put(pvt->F0); + pvt->F0 = NULL; + + edac_dbg(1, "F6 not found: device 0x%x\n", pci_id2); + return -ENODEV; + } + + if (!pci_ctl_dev) + pci_ctl_dev = &pvt->F0->dev; + + edac_dbg(1, "F0: %s\n", pci_name(pvt->F0)); + edac_dbg(1, "F3: %s\n", pci_name(pvt->F3)); + edac_dbg(1, "F6: %s\n", pci_name(pvt->F6)); + + return 0; + } + + /* Reserve the ADDRESS MAP Device */ + pvt->F1 = pci_get_related_function(pvt->F3->vendor, pci_id1, pvt->F3); + if (!pvt->F1) { + edac_dbg(1, "F1 not found: device 0x%x\n", pci_id1); + return -ENODEV; + } + + /* Reserve the DCT Device */ + pvt->F2 = pci_get_related_function(pvt->F3->vendor, pci_id2, pvt->F3); + if (!pvt->F2) { + pci_dev_put(pvt->F1); + pvt->F1 = NULL; + + edac_dbg(1, "F2 not found: device 0x%x\n", pci_id2); + return -ENODEV; + } + + if (!pci_ctl_dev) + pci_ctl_dev = &pvt->F2->dev; + + edac_dbg(1, "F1: %s\n", pci_name(pvt->F1)); + edac_dbg(1, "F2: %s\n", pci_name(pvt->F2)); + edac_dbg(1, "F3: %s\n", pci_name(pvt->F3)); + + return 0; +} + +static void free_mc_sibling_devs(struct amd64_pvt *pvt) +{ + if (pvt->umc) { + pci_dev_put(pvt->F0); + pci_dev_put(pvt->F6); + } else { + pci_dev_put(pvt->F1); + pci_dev_put(pvt->F2); + } +} + +static void determine_ecc_sym_sz(struct amd64_pvt *pvt) +{ + pvt->ecc_sym_sz = 4; + + if (pvt->umc) { + u8 i; + + for_each_umc(i) { + /* Check enabled channels only: */ + if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) { + if (pvt->umc[i].ecc_ctrl & BIT(9)) { + pvt->ecc_sym_sz = 16; + return; + } else if (pvt->umc[i].ecc_ctrl & BIT(7)) { + pvt->ecc_sym_sz = 8; + return; + } + } + } + } else if (pvt->fam >= 0x10) { + u32 tmp; + + amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp); + /* F16h has only DCT0, so no need to read dbam1. */ + if (pvt->fam != 0x16) + amd64_read_dct_pci_cfg(pvt, 1, DBAM0, &pvt->dbam1); + + /* F10h, revD and later can do x8 ECC too. */ + if ((pvt->fam > 0x10 || pvt->model > 7) && tmp & BIT(25)) + pvt->ecc_sym_sz = 8; + } +} + +/* + * Retrieve the hardware registers of the memory controller. + */ +static void __read_mc_regs_df(struct amd64_pvt *pvt) +{ + u8 nid = pvt->mc_node_id; + struct amd64_umc *umc; + u32 i, umc_base; + + /* Read registers from each UMC */ + for_each_umc(i) { + + umc_base = get_umc_base(i); + umc = &pvt->umc[i]; + + amd_smn_read(nid, umc_base + get_umc_reg(UMCCH_DIMM_CFG), &umc->dimm_cfg); + amd_smn_read(nid, umc_base + UMCCH_UMC_CFG, &umc->umc_cfg); + amd_smn_read(nid, umc_base + UMCCH_SDP_CTRL, &umc->sdp_ctrl); + amd_smn_read(nid, umc_base + UMCCH_ECC_CTRL, &umc->ecc_ctrl); + amd_smn_read(nid, umc_base + UMCCH_UMC_CAP_HI, &umc->umc_cap_hi); + } +} + +/* + * Retrieve the hardware registers of the memory controller (this includes the + * 'Address Map' and 'Misc' device regs) + */ +static void read_mc_regs(struct amd64_pvt *pvt) +{ + unsigned int range; + u64 msr_val; + + /* + * Retrieve TOP_MEM and TOP_MEM2; no masking off of reserved bits since + * those are Read-As-Zero. + */ + rdmsrl(MSR_K8_TOP_MEM1, pvt->top_mem); + edac_dbg(0, " TOP_MEM: 0x%016llx\n", pvt->top_mem); + + /* Check first whether TOP_MEM2 is enabled: */ + rdmsrl(MSR_AMD64_SYSCFG, msr_val); + if (msr_val & BIT(21)) { + rdmsrl(MSR_K8_TOP_MEM2, pvt->top_mem2); + edac_dbg(0, " TOP_MEM2: 0x%016llx\n", pvt->top_mem2); + } else { + edac_dbg(0, " TOP_MEM2 disabled\n"); + } + + if (pvt->umc) { + __read_mc_regs_df(pvt); + amd64_read_pci_cfg(pvt->F0, DF_DHAR, &pvt->dhar); + + goto skip; + } + + amd64_read_pci_cfg(pvt->F3, NBCAP, &pvt->nbcap); + + read_dram_ctl_register(pvt); + + for (range = 0; range < DRAM_RANGES; range++) { + u8 rw; + + /* read settings for this DRAM range */ + read_dram_base_limit_regs(pvt, range); + + rw = dram_rw(pvt, range); + if (!rw) + continue; + + edac_dbg(1, " DRAM range[%d], base: 0x%016llx; limit: 0x%016llx\n", + range, + get_dram_base(pvt, range), + get_dram_limit(pvt, range)); + + edac_dbg(1, " IntlvEn=%s; Range access: %s%s IntlvSel=%d DstNode=%d\n", + dram_intlv_en(pvt, range) ? "Enabled" : "Disabled", + (rw & 0x1) ? "R" : "-", + (rw & 0x2) ? "W" : "-", + dram_intlv_sel(pvt, range), + dram_dst_node(pvt, range)); + } + + amd64_read_pci_cfg(pvt->F1, DHAR, &pvt->dhar); + amd64_read_dct_pci_cfg(pvt, 0, DBAM0, &pvt->dbam0); + + amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare); + + amd64_read_dct_pci_cfg(pvt, 0, DCLR0, &pvt->dclr0); + amd64_read_dct_pci_cfg(pvt, 0, DCHR0, &pvt->dchr0); + + if (!dct_ganging_enabled(pvt)) { + amd64_read_dct_pci_cfg(pvt, 1, DCLR0, &pvt->dclr1); + amd64_read_dct_pci_cfg(pvt, 1, DCHR0, &pvt->dchr1); + } + +skip: + read_dct_base_mask(pvt); + + determine_memory_type(pvt); + + if (!pvt->umc) + edac_dbg(1, " DIMM type: %s\n", edac_mem_types[pvt->dram_type]); + + determine_ecc_sym_sz(pvt); +} + +/* + * NOTE: CPU Revision Dependent code + * + * Input: + * @csrow_nr ChipSelect Row Number (0..NUM_CHIPSELECTS-1) + * k8 private pointer to --> + * DRAM Bank Address mapping register + * node_id + * DCL register where dual_channel_active is + * + * The DBAM register consists of 4 sets of 4 bits each definitions: + * + * Bits: CSROWs + * 0-3 CSROWs 0 and 1 + * 4-7 CSROWs 2 and 3 + * 8-11 CSROWs 4 and 5 + * 12-15 CSROWs 6 and 7 + * + * Values range from: 0 to 15 + * The meaning of the values depends on CPU revision and dual-channel state, + * see relevant BKDG more info. + * + * The memory controller provides for total of only 8 CSROWs in its current + * architecture. Each "pair" of CSROWs normally represents just one DIMM in + * single channel or two (2) DIMMs in dual channel mode. + * + * The following code logic collapses the various tables for CSROW based on CPU + * revision. + * + * Returns: + * The number of PAGE_SIZE pages on the specified CSROW number it + * encompasses + * + */ +static u32 get_csrow_nr_pages(struct amd64_pvt *pvt, u8 dct, int csrow_nr_orig) +{ + u32 dbam = dct ? pvt->dbam1 : pvt->dbam0; + int csrow_nr = csrow_nr_orig; + u32 cs_mode, nr_pages; + + if (!pvt->umc) { + csrow_nr >>= 1; + cs_mode = DBAM_DIMM(csrow_nr, dbam); + } else { + cs_mode = f17_get_cs_mode(csrow_nr >> 1, dct, pvt); + } + + nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, csrow_nr); + nr_pages <<= 20 - PAGE_SHIFT; + + edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n", + csrow_nr_orig, dct, cs_mode); + edac_dbg(0, "nr_pages/channel: %u\n", nr_pages); + + return nr_pages; +} + +static int init_csrows_df(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + enum edac_type edac_mode = EDAC_NONE; + enum dev_type dev_type = DEV_UNKNOWN; + struct dimm_info *dimm; + int empty = 1; + u8 umc, cs; + + if (mci->edac_ctl_cap & EDAC_FLAG_S16ECD16ED) { + edac_mode = EDAC_S16ECD16ED; + dev_type = DEV_X16; + } else if (mci->edac_ctl_cap & EDAC_FLAG_S8ECD8ED) { + edac_mode = EDAC_S8ECD8ED; + dev_type = DEV_X8; + } else if (mci->edac_ctl_cap & EDAC_FLAG_S4ECD4ED) { + edac_mode = EDAC_S4ECD4ED; + dev_type = DEV_X4; + } else if (mci->edac_ctl_cap & EDAC_FLAG_SECDED) { + edac_mode = EDAC_SECDED; + } + + for_each_umc(umc) { + for_each_chip_select(cs, umc, pvt) { + if (!csrow_enabled(cs, umc, pvt)) + continue; + + empty = 0; + dimm = mci->csrows[cs]->channels[umc]->dimm; + + edac_dbg(1, "MC node: %d, csrow: %d\n", + pvt->mc_node_id, cs); + + dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs); + dimm->mtype = pvt->umc[umc].dram_type; + dimm->edac_mode = edac_mode; + dimm->dtype = dev_type; + dimm->grain = 64; + } + } + + return empty; +} + +/* + * Initialize the array of csrow attribute instances, based on the values + * from pci config hardware registers. + */ +static int init_csrows(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + enum edac_type edac_mode = EDAC_NONE; + struct csrow_info *csrow; + struct dimm_info *dimm; + int i, j, empty = 1; + int nr_pages = 0; + u32 val; + + if (pvt->umc) + return init_csrows_df(mci); + + amd64_read_pci_cfg(pvt->F3, NBCFG, &val); + + pvt->nbcfg = val; + + edac_dbg(0, "node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n", + pvt->mc_node_id, val, + !!(val & NBCFG_CHIPKILL), !!(val & NBCFG_ECC_ENABLE)); + + /* + * We iterate over DCT0 here but we look at DCT1 in parallel, if needed. + */ + for_each_chip_select(i, 0, pvt) { + bool row_dct0 = !!csrow_enabled(i, 0, pvt); + bool row_dct1 = false; + + if (pvt->fam != 0xf) + row_dct1 = !!csrow_enabled(i, 1, pvt); + + if (!row_dct0 && !row_dct1) + continue; + + csrow = mci->csrows[i]; + empty = 0; + + edac_dbg(1, "MC node: %d, csrow: %d\n", + pvt->mc_node_id, i); + + if (row_dct0) { + nr_pages = get_csrow_nr_pages(pvt, 0, i); + csrow->channels[0]->dimm->nr_pages = nr_pages; + } + + /* K8 has only one DCT */ + if (pvt->fam != 0xf && row_dct1) { + int row_dct1_pages = get_csrow_nr_pages(pvt, 1, i); + + csrow->channels[1]->dimm->nr_pages = row_dct1_pages; + nr_pages += row_dct1_pages; + } + + edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages); + + /* Determine DIMM ECC mode: */ + if (pvt->nbcfg & NBCFG_ECC_ENABLE) { + edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL) + ? EDAC_S4ECD4ED + : EDAC_SECDED; + } + + for (j = 0; j < pvt->channel_count; j++) { + dimm = csrow->channels[j]->dimm; + dimm->mtype = pvt->dram_type; + dimm->edac_mode = edac_mode; + dimm->grain = 64; + } + } + + return empty; +} + +/* get all cores on this DCT */ +static void get_cpus_on_this_dct_cpumask(struct cpumask *mask, u16 nid) +{ + int cpu; + + for_each_online_cpu(cpu) + if (topology_die_id(cpu) == nid) + cpumask_set_cpu(cpu, mask); +} + +/* check MCG_CTL on all the cpus on this node */ +static bool nb_mce_bank_enabled_on_node(u16 nid) +{ + cpumask_var_t mask; + int cpu, nbe; + bool ret = false; + + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) { + amd64_warn("%s: Error allocating mask\n", __func__); + return false; + } + + get_cpus_on_this_dct_cpumask(mask, nid); + + rdmsr_on_cpus(mask, MSR_IA32_MCG_CTL, msrs); + + for_each_cpu(cpu, mask) { + struct msr *reg = per_cpu_ptr(msrs, cpu); + nbe = reg->l & MSR_MCGCTL_NBE; + + edac_dbg(0, "core: %u, MCG_CTL: 0x%llx, NB MSR is %s\n", + cpu, reg->q, + (nbe ? "enabled" : "disabled")); + + if (!nbe) + goto out; + } + ret = true; + +out: + free_cpumask_var(mask); + return ret; +} + +static int toggle_ecc_err_reporting(struct ecc_settings *s, u16 nid, bool on) +{ + cpumask_var_t cmask; + int cpu; + + if (!zalloc_cpumask_var(&cmask, GFP_KERNEL)) { + amd64_warn("%s: error allocating mask\n", __func__); + return -ENOMEM; + } + + get_cpus_on_this_dct_cpumask(cmask, nid); + + rdmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs); + + for_each_cpu(cpu, cmask) { + + struct msr *reg = per_cpu_ptr(msrs, cpu); + + if (on) { + if (reg->l & MSR_MCGCTL_NBE) + s->flags.nb_mce_enable = 1; + + reg->l |= MSR_MCGCTL_NBE; + } else { + /* + * Turn off NB MCE reporting only when it was off before + */ + if (!s->flags.nb_mce_enable) + reg->l &= ~MSR_MCGCTL_NBE; + } + } + wrmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs); + + free_cpumask_var(cmask); + + return 0; +} + +static bool enable_ecc_error_reporting(struct ecc_settings *s, u16 nid, + struct pci_dev *F3) +{ + bool ret = true; + u32 value, mask = 0x3; /* UECC/CECC enable */ + + if (toggle_ecc_err_reporting(s, nid, ON)) { + amd64_warn("Error enabling ECC reporting over MCGCTL!\n"); + return false; + } + + amd64_read_pci_cfg(F3, NBCTL, &value); + + s->old_nbctl = value & mask; + s->nbctl_valid = true; + + value |= mask; + amd64_write_pci_cfg(F3, NBCTL, value); + + amd64_read_pci_cfg(F3, NBCFG, &value); + + edac_dbg(0, "1: node %d, NBCFG=0x%08x[DramEccEn: %d]\n", + nid, value, !!(value & NBCFG_ECC_ENABLE)); + + if (!(value & NBCFG_ECC_ENABLE)) { + amd64_warn("DRAM ECC disabled on this node, enabling...\n"); + + s->flags.nb_ecc_prev = 0; + + /* Attempt to turn on DRAM ECC Enable */ + value |= NBCFG_ECC_ENABLE; + amd64_write_pci_cfg(F3, NBCFG, value); + + amd64_read_pci_cfg(F3, NBCFG, &value); + + if (!(value & NBCFG_ECC_ENABLE)) { + amd64_warn("Hardware rejected DRAM ECC enable," + "check memory DIMM configuration.\n"); + ret = false; + } else { + amd64_info("Hardware accepted DRAM ECC Enable\n"); + } + } else { + s->flags.nb_ecc_prev = 1; + } + + edac_dbg(0, "2: node %d, NBCFG=0x%08x[DramEccEn: %d]\n", + nid, value, !!(value & NBCFG_ECC_ENABLE)); + + return ret; +} + +static void restore_ecc_error_reporting(struct ecc_settings *s, u16 nid, + struct pci_dev *F3) +{ + u32 value, mask = 0x3; /* UECC/CECC enable */ + + if (!s->nbctl_valid) + return; + + amd64_read_pci_cfg(F3, NBCTL, &value); + value &= ~mask; + value |= s->old_nbctl; + + amd64_write_pci_cfg(F3, NBCTL, value); + + /* restore previous BIOS DRAM ECC "off" setting we force-enabled */ + if (!s->flags.nb_ecc_prev) { + amd64_read_pci_cfg(F3, NBCFG, &value); + value &= ~NBCFG_ECC_ENABLE; + amd64_write_pci_cfg(F3, NBCFG, value); + } + + /* restore the NB Enable MCGCTL bit */ + if (toggle_ecc_err_reporting(s, nid, OFF)) + amd64_warn("Error restoring NB MCGCTL settings!\n"); +} + +static bool ecc_enabled(struct amd64_pvt *pvt) +{ + u16 nid = pvt->mc_node_id; + bool nb_mce_en = false; + u8 ecc_en = 0, i; + u32 value; + + if (boot_cpu_data.x86 >= 0x17) { + u8 umc_en_mask = 0, ecc_en_mask = 0; + struct amd64_umc *umc; + + for_each_umc(i) { + umc = &pvt->umc[i]; + + /* Only check enabled UMCs. */ + if (!(umc->sdp_ctrl & UMC_SDP_INIT)) + continue; + + umc_en_mask |= BIT(i); + + if (umc->umc_cap_hi & UMC_ECC_ENABLED) + ecc_en_mask |= BIT(i); + } + + /* Check whether at least one UMC is enabled: */ + if (umc_en_mask) + ecc_en = umc_en_mask == ecc_en_mask; + else + edac_dbg(0, "Node %d: No enabled UMCs.\n", nid); + + /* Assume UMC MCA banks are enabled. */ + nb_mce_en = true; + } else { + amd64_read_pci_cfg(pvt->F3, NBCFG, &value); + + ecc_en = !!(value & NBCFG_ECC_ENABLE); + + nb_mce_en = nb_mce_bank_enabled_on_node(nid); + if (!nb_mce_en) + edac_dbg(0, "NB MCE bank disabled, set MSR 0x%08x[4] on node %d to enable.\n", + MSR_IA32_MCG_CTL, nid); + } + + edac_dbg(3, "Node %d: DRAM ECC %s.\n", nid, (ecc_en ? "enabled" : "disabled")); + + if (!ecc_en || !nb_mce_en) + return false; + else + return true; +} + +static inline void +f17h_determine_edac_ctl_cap(struct mem_ctl_info *mci, struct amd64_pvt *pvt) +{ + u8 i, ecc_en = 1, cpk_en = 1, dev_x4 = 1, dev_x16 = 1; + + for_each_umc(i) { + if (pvt->umc[i].sdp_ctrl & UMC_SDP_INIT) { + ecc_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_ENABLED); + cpk_en &= !!(pvt->umc[i].umc_cap_hi & UMC_ECC_CHIPKILL_CAP); + + dev_x4 &= !!(pvt->umc[i].dimm_cfg & BIT(6)); + dev_x16 &= !!(pvt->umc[i].dimm_cfg & BIT(7)); + } + } + + /* Set chipkill only if ECC is enabled: */ + if (ecc_en) { + mci->edac_ctl_cap |= EDAC_FLAG_SECDED; + + if (!cpk_en) + return; + + if (dev_x4) + mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED; + else if (dev_x16) + mci->edac_ctl_cap |= EDAC_FLAG_S16ECD16ED; + else + mci->edac_ctl_cap |= EDAC_FLAG_S8ECD8ED; + } +} + +static void setup_mci_misc_attrs(struct mem_ctl_info *mci) +{ + struct amd64_pvt *pvt = mci->pvt_info; + + mci->mtype_cap = MEM_FLAG_DDR2 | MEM_FLAG_RDDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + + if (pvt->umc) { + f17h_determine_edac_ctl_cap(mci, pvt); + } else { + if (pvt->nbcap & NBCAP_SECDED) + mci->edac_ctl_cap |= EDAC_FLAG_SECDED; + + if (pvt->nbcap & NBCAP_CHIPKILL) + mci->edac_ctl_cap |= EDAC_FLAG_S4ECD4ED; + } + + mci->edac_cap = determine_edac_cap(pvt); + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = fam_type->ctl_name; + mci->dev_name = pci_name(pvt->F3); + mci->ctl_page_to_phys = NULL; + + /* memory scrubber interface */ + mci->set_sdram_scrub_rate = set_scrub_rate; + mci->get_sdram_scrub_rate = get_scrub_rate; +} + +/* + * returns a pointer to the family descriptor on success, NULL otherwise. + */ +static struct amd64_family_type *per_family_init(struct amd64_pvt *pvt) +{ + pvt->ext_model = boot_cpu_data.x86_model >> 4; + pvt->stepping = boot_cpu_data.x86_stepping; + pvt->model = boot_cpu_data.x86_model; + pvt->fam = boot_cpu_data.x86; + + switch (pvt->fam) { + case 0xf: + fam_type = &family_types[K8_CPUS]; + pvt->ops = &family_types[K8_CPUS].ops; + break; + + case 0x10: + fam_type = &family_types[F10_CPUS]; + pvt->ops = &family_types[F10_CPUS].ops; + break; + + case 0x15: + if (pvt->model == 0x30) { + fam_type = &family_types[F15_M30H_CPUS]; + pvt->ops = &family_types[F15_M30H_CPUS].ops; + break; + } else if (pvt->model == 0x60) { + fam_type = &family_types[F15_M60H_CPUS]; + pvt->ops = &family_types[F15_M60H_CPUS].ops; + break; + /* Richland is only client */ + } else if (pvt->model == 0x13) { + return NULL; + } else { + fam_type = &family_types[F15_CPUS]; + pvt->ops = &family_types[F15_CPUS].ops; + } + break; + + case 0x16: + if (pvt->model == 0x30) { + fam_type = &family_types[F16_M30H_CPUS]; + pvt->ops = &family_types[F16_M30H_CPUS].ops; + break; + } + fam_type = &family_types[F16_CPUS]; + pvt->ops = &family_types[F16_CPUS].ops; + break; + + case 0x17: + if (pvt->model >= 0x10 && pvt->model <= 0x2f) { + fam_type = &family_types[F17_M10H_CPUS]; + pvt->ops = &family_types[F17_M10H_CPUS].ops; + break; + } else if (pvt->model >= 0x30 && pvt->model <= 0x3f) { + fam_type = &family_types[F17_M30H_CPUS]; + pvt->ops = &family_types[F17_M30H_CPUS].ops; + break; + } else if (pvt->model >= 0x60 && pvt->model <= 0x6f) { + fam_type = &family_types[F17_M60H_CPUS]; + pvt->ops = &family_types[F17_M60H_CPUS].ops; + break; + } else if (pvt->model >= 0x70 && pvt->model <= 0x7f) { + fam_type = &family_types[F17_M70H_CPUS]; + pvt->ops = &family_types[F17_M70H_CPUS].ops; + break; + } + fallthrough; + case 0x18: + fam_type = &family_types[F17_CPUS]; + pvt->ops = &family_types[F17_CPUS].ops; + + if (pvt->fam == 0x18) + family_types[F17_CPUS].ctl_name = "F18h"; + break; + + case 0x19: + if (pvt->model >= 0x10 && pvt->model <= 0x1f) { + fam_type = &family_types[F19_M10H_CPUS]; + pvt->ops = &family_types[F19_M10H_CPUS].ops; + break; + } else if (pvt->model >= 0x20 && pvt->model <= 0x2f) { + fam_type = &family_types[F17_M70H_CPUS]; + pvt->ops = &family_types[F17_M70H_CPUS].ops; + fam_type->ctl_name = "F19h_M20h"; + break; + } else if (pvt->model >= 0x50 && pvt->model <= 0x5f) { + fam_type = &family_types[F19_M50H_CPUS]; + pvt->ops = &family_types[F19_M50H_CPUS].ops; + fam_type->ctl_name = "F19h_M50h"; + break; + } else if (pvt->model >= 0xa0 && pvt->model <= 0xaf) { + fam_type = &family_types[F19_M10H_CPUS]; + pvt->ops = &family_types[F19_M10H_CPUS].ops; + fam_type->ctl_name = "F19h_MA0h"; + break; + } + fam_type = &family_types[F19_CPUS]; + pvt->ops = &family_types[F19_CPUS].ops; + family_types[F19_CPUS].ctl_name = "F19h"; + break; + + default: + amd64_err("Unsupported family!\n"); + return NULL; + } + + return fam_type; +} + +static const struct attribute_group *amd64_edac_attr_groups[] = { +#ifdef CONFIG_EDAC_DEBUG + &dbg_group, + &inj_group, +#endif + NULL +}; + +static int hw_info_get(struct amd64_pvt *pvt) +{ + u16 pci_id1, pci_id2; + int ret; + + if (pvt->fam >= 0x17) { + pvt->umc = kcalloc(fam_type->max_mcs, sizeof(struct amd64_umc), GFP_KERNEL); + if (!pvt->umc) + return -ENOMEM; + + pci_id1 = fam_type->f0_id; + pci_id2 = fam_type->f6_id; + } else { + pci_id1 = fam_type->f1_id; + pci_id2 = fam_type->f2_id; + } + + ret = reserve_mc_sibling_devs(pvt, pci_id1, pci_id2); + if (ret) + return ret; + + read_mc_regs(pvt); + + return 0; +} + +static void hw_info_put(struct amd64_pvt *pvt) +{ + if (pvt->F0 || pvt->F1) + free_mc_sibling_devs(pvt); + + kfree(pvt->umc); +} + +static int init_one_instance(struct amd64_pvt *pvt) +{ + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + int ret = -EINVAL; + + /* + * We need to determine how many memory channels there are. Then use + * that information for calculating the size of the dynamic instance + * tables in the 'mci' structure. + */ + pvt->channel_count = pvt->ops->early_channel_count(pvt); + if (pvt->channel_count < 0) + return ret; + + ret = -ENOMEM; + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = pvt->csels[0].b_cnt; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + + /* + * Always allocate two channels since we can have setups with DIMMs on + * only one channel. Also, this simplifies handling later for the price + * of a couple of KBs tops. + */ + layers[1].size = fam_type->max_mcs; + layers[1].is_virt_csrow = false; + + mci = edac_mc_alloc(pvt->mc_node_id, ARRAY_SIZE(layers), layers, 0); + if (!mci) + return ret; + + mci->pvt_info = pvt; + mci->pdev = &pvt->F3->dev; + + setup_mci_misc_attrs(mci); + + if (init_csrows(mci)) + mci->edac_cap = EDAC_FLAG_NONE; + + ret = -ENODEV; + if (edac_mc_add_mc_with_groups(mci, amd64_edac_attr_groups)) { + edac_dbg(1, "failed edac_mc_add_mc()\n"); + edac_mc_free(mci); + return ret; + } + + return 0; +} + +static bool instance_has_memory(struct amd64_pvt *pvt) +{ + bool cs_enabled = false; + int cs = 0, dct = 0; + + for (dct = 0; dct < fam_type->max_mcs; dct++) { + for_each_chip_select(cs, dct, pvt) + cs_enabled |= csrow_enabled(cs, dct, pvt); + } + + return cs_enabled; +} + +static int probe_one_instance(unsigned int nid) +{ + struct pci_dev *F3 = node_to_amd_nb(nid)->misc; + struct amd64_pvt *pvt = NULL; + struct ecc_settings *s; + int ret; + + ret = -ENOMEM; + s = kzalloc(sizeof(struct ecc_settings), GFP_KERNEL); + if (!s) + goto err_out; + + ecc_stngs[nid] = s; + + pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL); + if (!pvt) + goto err_settings; + + pvt->mc_node_id = nid; + pvt->F3 = F3; + + ret = -ENODEV; + fam_type = per_family_init(pvt); + if (!fam_type) + goto err_enable; + + ret = hw_info_get(pvt); + if (ret < 0) + goto err_enable; + + ret = 0; + if (!instance_has_memory(pvt)) { + amd64_info("Node %d: No DIMMs detected.\n", nid); + goto err_enable; + } + + if (!ecc_enabled(pvt)) { + ret = -ENODEV; + + if (!ecc_enable_override) + goto err_enable; + + if (boot_cpu_data.x86 >= 0x17) { + amd64_warn("Forcing ECC on is not recommended on newer systems. Please enable ECC in BIOS."); + goto err_enable; + } else + amd64_warn("Forcing ECC on!\n"); + + if (!enable_ecc_error_reporting(s, nid, F3)) + goto err_enable; + } + + ret = init_one_instance(pvt); + if (ret < 0) { + amd64_err("Error probing instance: %d\n", nid); + + if (boot_cpu_data.x86 < 0x17) + restore_ecc_error_reporting(s, nid, F3); + + goto err_enable; + } + + amd64_info("%s %sdetected (node %d).\n", fam_type->ctl_name, + (pvt->fam == 0xf ? + (pvt->ext_model >= K8_REV_F ? "revF or later " + : "revE or earlier ") + : ""), pvt->mc_node_id); + + dump_misc_regs(pvt); + + return ret; + +err_enable: + hw_info_put(pvt); + kfree(pvt); + +err_settings: + kfree(s); + ecc_stngs[nid] = NULL; + +err_out: + return ret; +} + +static void remove_one_instance(unsigned int nid) +{ + struct pci_dev *F3 = node_to_amd_nb(nid)->misc; + struct ecc_settings *s = ecc_stngs[nid]; + struct mem_ctl_info *mci; + struct amd64_pvt *pvt; + + /* Remove from EDAC CORE tracking list */ + mci = edac_mc_del_mc(&F3->dev); + if (!mci) + return; + + pvt = mci->pvt_info; + + restore_ecc_error_reporting(s, nid, F3); + + kfree(ecc_stngs[nid]); + ecc_stngs[nid] = NULL; + + /* Free the EDAC CORE resources */ + mci->pvt_info = NULL; + + hw_info_put(pvt); + kfree(pvt); + edac_mc_free(mci); +} + +static void setup_pci_device(void) +{ + if (pci_ctl) + return; + + pci_ctl = edac_pci_create_generic_ctl(pci_ctl_dev, EDAC_MOD_STR); + if (!pci_ctl) { + pr_warn("%s(): Unable to create PCI control\n", __func__); + pr_warn("%s(): PCI error report via EDAC not set\n", __func__); + } +} + +static const struct x86_cpu_id amd64_cpuids[] = { + X86_MATCH_VENDOR_FAM(AMD, 0x0F, NULL), + X86_MATCH_VENDOR_FAM(AMD, 0x10, NULL), + X86_MATCH_VENDOR_FAM(AMD, 0x15, NULL), + X86_MATCH_VENDOR_FAM(AMD, 0x16, NULL), + X86_MATCH_VENDOR_FAM(AMD, 0x17, NULL), + X86_MATCH_VENDOR_FAM(HYGON, 0x18, NULL), + X86_MATCH_VENDOR_FAM(AMD, 0x19, NULL), + { } +}; +MODULE_DEVICE_TABLE(x86cpu, amd64_cpuids); + +static int __init amd64_edac_init(void) +{ + const char *owner; + int err = -ENODEV; + int i; + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + if (!x86_match_cpu(amd64_cpuids)) + return -ENODEV; + + if (!amd_nb_num()) + return -ENODEV; + + opstate_init(); + + err = -ENOMEM; + ecc_stngs = kcalloc(amd_nb_num(), sizeof(ecc_stngs[0]), GFP_KERNEL); + if (!ecc_stngs) + goto err_free; + + msrs = msrs_alloc(); + if (!msrs) + goto err_free; + + for (i = 0; i < amd_nb_num(); i++) { + err = probe_one_instance(i); + if (err) { + /* unwind properly */ + while (--i >= 0) + remove_one_instance(i); + + goto err_pci; + } + } + + if (!edac_has_mcs()) { + err = -ENODEV; + goto err_pci; + } + + /* register stuff with EDAC MCE */ + if (boot_cpu_data.x86 >= 0x17) + amd_register_ecc_decoder(decode_umc_error); + else + amd_register_ecc_decoder(decode_bus_error); + + setup_pci_device(); + +#ifdef CONFIG_X86_32 + amd64_err("%s on 32-bit is unsupported. USE AT YOUR OWN RISK!\n", EDAC_MOD_STR); +#endif + + printk(KERN_INFO "AMD64 EDAC driver v%s\n", EDAC_AMD64_VERSION); + + return 0; + +err_pci: + pci_ctl_dev = NULL; + + msrs_free(msrs); + msrs = NULL; + +err_free: + kfree(ecc_stngs); + ecc_stngs = NULL; + + return err; +} + +static void __exit amd64_edac_exit(void) +{ + int i; + + if (pci_ctl) + edac_pci_release_generic_ctl(pci_ctl); + + /* unregister from EDAC MCE */ + if (boot_cpu_data.x86 >= 0x17) + amd_unregister_ecc_decoder(decode_umc_error); + else + amd_unregister_ecc_decoder(decode_bus_error); + + for (i = 0; i < amd_nb_num(); i++) + remove_one_instance(i); + + kfree(ecc_stngs); + ecc_stngs = NULL; + + pci_ctl_dev = NULL; + + msrs_free(msrs); + msrs = NULL; +} + +module_init(amd64_edac_init); +module_exit(amd64_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("SoftwareBitMaker: Doug Thompson, " + "Dave Peterson, Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for AMD64 memory controllers - " + EDAC_AMD64_VERSION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h new file mode 100644 index 000000000..38e5ad95d --- /dev/null +++ b/drivers/edac/amd64_edac.h @@ -0,0 +1,566 @@ +/* + * AMD64 class Memory Controller kernel module + * + * Copyright (c) 2009 SoftwareBitMaker. + * Copyright (c) 2009-15 Advanced Micro Devices, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + */ + +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/mmzone.h> +#include <linux/edac.h> +#include <asm/cpu_device_id.h> +#include <asm/msr.h> +#include "edac_module.h" +#include "mce_amd.h" + +#define amd64_info(fmt, arg...) \ + edac_printk(KERN_INFO, "amd64", fmt, ##arg) + +#define amd64_warn(fmt, arg...) \ + edac_printk(KERN_WARNING, "amd64", "Warning: " fmt, ##arg) + +#define amd64_err(fmt, arg...) \ + edac_printk(KERN_ERR, "amd64", "Error: " fmt, ##arg) + +#define amd64_mc_warn(mci, fmt, arg...) \ + edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg) + +#define amd64_mc_err(mci, fmt, arg...) \ + edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg) + +/* + * Throughout the comments in this code, the following terms are used: + * + * SysAddr, DramAddr, and InputAddr + * + * These terms come directly from the amd64 documentation + * (AMD publication #26094). They are defined as follows: + * + * SysAddr: + * This is a physical address generated by a CPU core or a device + * doing DMA. If generated by a CPU core, a SysAddr is the result of + * a virtual to physical address translation by the CPU core's address + * translation mechanism (MMU). + * + * DramAddr: + * A DramAddr is derived from a SysAddr by subtracting an offset that + * depends on which node the SysAddr maps to and whether the SysAddr + * is within a range affected by memory hoisting. The DRAM Base + * (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers + * determine which node a SysAddr maps to. + * + * If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr + * is within the range of addresses specified by this register, then + * a value x from the DHAR is subtracted from the SysAddr to produce a + * DramAddr. Here, x represents the base address for the node that + * the SysAddr maps to plus an offset due to memory hoisting. See + * section 3.4.8 and the comments in amd64_get_dram_hole_info() and + * sys_addr_to_dram_addr() below for more information. + * + * If the SysAddr is not affected by the DHAR then a value y is + * subtracted from the SysAddr to produce a DramAddr. Here, y is the + * base address for the node that the SysAddr maps to. See section + * 3.4.4 and the comments in sys_addr_to_dram_addr() below for more + * information. + * + * InputAddr: + * A DramAddr is translated to an InputAddr before being passed to the + * memory controller for the node that the DramAddr is associated + * with. The memory controller then maps the InputAddr to a csrow. + * If node interleaving is not in use, then the InputAddr has the same + * value as the DramAddr. Otherwise, the InputAddr is produced by + * discarding the bits used for node interleaving from the DramAddr. + * See section 3.4.4 for more information. + * + * The memory controller for a given node uses its DRAM CS Base and + * DRAM CS Mask registers to map an InputAddr to a csrow. See + * sections 3.5.4 and 3.5.5 for more information. + */ + +#define EDAC_AMD64_VERSION "3.5.0" +#define EDAC_MOD_STR "amd64_edac" + +/* Extended Model from CPUID, for CPU Revision numbers */ +#define K8_REV_D 1 +#define K8_REV_E 2 +#define K8_REV_F 4 + +/* Hardware limit on ChipSelect rows per MC and processors per system */ +#define NUM_CHIPSELECTS 8 +#define DRAM_RANGES 8 +#define NUM_CONTROLLERS 12 + +#define ON true +#define OFF false + +/* + * PCI-defined configuration space registers + */ +#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601 +#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602 +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b +#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c +#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571 +#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572 +#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531 +#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581 +#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F2 0x1582 +#define PCI_DEVICE_ID_AMD_17H_DF_F0 0x1460 +#define PCI_DEVICE_ID_AMD_17H_DF_F6 0x1466 +#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F0 0x15e8 +#define PCI_DEVICE_ID_AMD_17H_M10H_DF_F6 0x15ee +#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F0 0x1490 +#define PCI_DEVICE_ID_AMD_17H_M30H_DF_F6 0x1496 +#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F0 0x1448 +#define PCI_DEVICE_ID_AMD_17H_M60H_DF_F6 0x144e +#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F0 0x1440 +#define PCI_DEVICE_ID_AMD_17H_M70H_DF_F6 0x1446 +#define PCI_DEVICE_ID_AMD_19H_DF_F0 0x1650 +#define PCI_DEVICE_ID_AMD_19H_DF_F6 0x1656 +#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F0 0x14ad +#define PCI_DEVICE_ID_AMD_19H_M10H_DF_F6 0x14b3 +#define PCI_DEVICE_ID_AMD_19H_M50H_DF_F0 0x166a +#define PCI_DEVICE_ID_AMD_19H_M50H_DF_F6 0x1670 + +/* + * Function 1 - Address Map + */ +#define DRAM_BASE_LO 0x40 +#define DRAM_LIMIT_LO 0x44 + +/* + * F15 M30h D18F1x2[1C:00] + */ +#define DRAM_CONT_BASE 0x200 +#define DRAM_CONT_LIMIT 0x204 + +/* + * F15 M30h D18F1x2[4C:40] + */ +#define DRAM_CONT_HIGH_OFF 0x240 + +#define dram_rw(pvt, i) ((u8)(pvt->ranges[i].base.lo & 0x3)) +#define dram_intlv_sel(pvt, i) ((u8)((pvt->ranges[i].lim.lo >> 8) & 0x7)) +#define dram_dst_node(pvt, i) ((u8)(pvt->ranges[i].lim.lo & 0x7)) + +#define DHAR 0xf0 +#define dhar_mem_hoist_valid(pvt) ((pvt)->dhar & BIT(1)) +#define dhar_base(pvt) ((pvt)->dhar & 0xff000000) +#define k8_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff00) << 16) + + /* NOTE: Extra mask bit vs K8 */ +#define f10_dhar_offset(pvt) (((pvt)->dhar & 0x0000ff80) << 16) + +#define DCT_CFG_SEL 0x10C + +#define DRAM_LOCAL_NODE_BASE 0x120 +#define DRAM_LOCAL_NODE_LIM 0x124 + +#define DRAM_BASE_HI 0x140 +#define DRAM_LIMIT_HI 0x144 + + +/* + * Function 2 - DRAM controller + */ +#define DCSB0 0x40 +#define DCSB1 0x140 +#define DCSB_CS_ENABLE BIT(0) + +#define DCSM0 0x60 +#define DCSM1 0x160 + +#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE) +#define csrow_sec_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases_sec[(i)] & DCSB_CS_ENABLE) + +#define DRAM_CONTROL 0x78 + +#define DBAM0 0x80 +#define DBAM1 0x180 + +/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */ +#define DBAM_DIMM(i, reg) ((((reg) >> (4*(i)))) & 0xF) + +#define DBAM_MAX_VALUE 11 + +#define DCLR0 0x90 +#define DCLR1 0x190 +#define REVE_WIDTH_128 BIT(16) +#define WIDTH_128 BIT(11) + +#define DCHR0 0x94 +#define DCHR1 0x194 +#define DDR3_MODE BIT(8) + +#define DCT_SEL_LO 0x110 +#define dct_high_range_enabled(pvt) ((pvt)->dct_sel_lo & BIT(0)) +#define dct_interleave_enabled(pvt) ((pvt)->dct_sel_lo & BIT(2)) + +#define dct_ganging_enabled(pvt) ((boot_cpu_data.x86 == 0x10) && ((pvt)->dct_sel_lo & BIT(4))) + +#define dct_data_intlv_enabled(pvt) ((pvt)->dct_sel_lo & BIT(5)) +#define dct_memory_cleared(pvt) ((pvt)->dct_sel_lo & BIT(10)) + +#define SWAP_INTLV_REG 0x10c + +#define DCT_SEL_HI 0x114 + +#define F15H_M60H_SCRCTRL 0x1C8 +#define F17H_SCR_BASE_ADDR 0x48 +#define F17H_SCR_LIMIT_ADDR 0x4C + +/* + * Function 3 - Misc Control + */ +#define NBCTL 0x40 + +#define NBCFG 0x44 +#define NBCFG_CHIPKILL BIT(23) +#define NBCFG_ECC_ENABLE BIT(22) + +/* F3x48: NBSL */ +#define F10_NBSL_EXT_ERR_ECC 0x8 +#define NBSL_PP_OBS 0x2 + +#define SCRCTRL 0x58 + +#define F10_ONLINE_SPARE 0xB0 +#define online_spare_swap_done(pvt, c) (((pvt)->online_spare >> (1 + 2 * (c))) & 0x1) +#define online_spare_bad_dramcs(pvt, c) (((pvt)->online_spare >> (4 + 4 * (c))) & 0x7) + +#define F10_NB_ARRAY_ADDR 0xB8 +#define F10_NB_ARRAY_DRAM BIT(31) + +/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline */ +#define SET_NB_ARRAY_ADDR(section) (((section) & 0x3) << 1) + +#define F10_NB_ARRAY_DATA 0xBC +#define F10_NB_ARR_ECC_WR_REQ BIT(17) +#define SET_NB_DRAM_INJECTION_WRITE(inj) \ + (BIT(((inj.word) & 0xF) + 20) | \ + F10_NB_ARR_ECC_WR_REQ | inj.bit_map) +#define SET_NB_DRAM_INJECTION_READ(inj) \ + (BIT(((inj.word) & 0xF) + 20) | \ + BIT(16) | inj.bit_map) + + +#define NBCAP 0xE8 +#define NBCAP_CHIPKILL BIT(4) +#define NBCAP_SECDED BIT(3) +#define NBCAP_DCT_DUAL BIT(0) + +#define EXT_NB_MCA_CFG 0x180 + +/* MSRs */ +#define MSR_MCGCTL_NBE BIT(4) + +/* F17h */ + +/* F0: */ +#define DF_DHAR 0x104 + +/* UMC CH register offsets */ +#define UMCCH_BASE_ADDR 0x0 +#define UMCCH_BASE_ADDR_SEC 0x10 +#define UMCCH_ADDR_MASK 0x20 +#define UMCCH_ADDR_MASK_SEC 0x28 +#define UMCCH_ADDR_MASK_SEC_DDR5 0x30 +#define UMCCH_ADDR_CFG 0x30 +#define UMCCH_ADDR_CFG_DDR5 0x40 +#define UMCCH_DIMM_CFG 0x80 +#define UMCCH_DIMM_CFG_DDR5 0x90 +#define UMCCH_UMC_CFG 0x100 +#define UMCCH_SDP_CTRL 0x104 +#define UMCCH_ECC_CTRL 0x14C +#define UMCCH_ECC_BAD_SYMBOL 0xD90 +#define UMCCH_UMC_CAP 0xDF0 +#define UMCCH_UMC_CAP_HI 0xDF4 + +/* UMC CH bitfields */ +#define UMC_ECC_CHIPKILL_CAP BIT(31) +#define UMC_ECC_ENABLED BIT(30) + +#define UMC_SDP_INIT BIT(31) + +enum amd_families { + K8_CPUS = 0, + F10_CPUS, + F15_CPUS, + F15_M30H_CPUS, + F15_M60H_CPUS, + F16_CPUS, + F16_M30H_CPUS, + F17_CPUS, + F17_M10H_CPUS, + F17_M30H_CPUS, + F17_M60H_CPUS, + F17_M70H_CPUS, + F19_CPUS, + F19_M10H_CPUS, + F19_M50H_CPUS, + NUM_FAMILIES, +}; + +/* Error injection control structure */ +struct error_injection { + u32 section; + u32 word; + u32 bit_map; +}; + +/* low and high part of PCI config space regs */ +struct reg_pair { + u32 lo, hi; +}; + +/* + * See F1x[1, 0][7C:40] DRAM Base/Limit Registers + */ +struct dram_range { + struct reg_pair base; + struct reg_pair lim; +}; + +/* A DCT chip selects collection */ +struct chip_select { + u32 csbases[NUM_CHIPSELECTS]; + u32 csbases_sec[NUM_CHIPSELECTS]; + u8 b_cnt; + + u32 csmasks[NUM_CHIPSELECTS]; + u32 csmasks_sec[NUM_CHIPSELECTS]; + u8 m_cnt; +}; + +struct amd64_umc { + u32 dimm_cfg; /* DIMM Configuration reg */ + u32 umc_cfg; /* Configuration reg */ + u32 sdp_ctrl; /* SDP Control reg */ + u32 ecc_ctrl; /* DRAM ECC Control reg */ + u32 umc_cap_hi; /* Capabilities High reg */ + + /* cache the dram_type */ + enum mem_type dram_type; +}; + +struct amd64_pvt { + struct low_ops *ops; + + /* pci_device handles which we utilize */ + struct pci_dev *F0, *F1, *F2, *F3, *F6; + + u16 mc_node_id; /* MC index of this MC node */ + u8 fam; /* CPU family */ + u8 model; /* ... model */ + u8 stepping; /* ... stepping */ + + int ext_model; /* extended model value of this node */ + int channel_count; + + /* Raw registers */ + u32 dclr0; /* DRAM Configuration Low DCT0 reg */ + u32 dclr1; /* DRAM Configuration Low DCT1 reg */ + u32 dchr0; /* DRAM Configuration High DCT0 reg */ + u32 dchr1; /* DRAM Configuration High DCT1 reg */ + u32 nbcap; /* North Bridge Capabilities */ + u32 nbcfg; /* F10 North Bridge Configuration */ + u32 ext_nbcfg; /* Extended F10 North Bridge Configuration */ + u32 dhar; /* DRAM Hoist reg */ + u32 dbam0; /* DRAM Base Address Mapping reg for DCT0 */ + u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */ + + /* one for each DCT/UMC */ + struct chip_select csels[NUM_CONTROLLERS]; + + /* DRAM base and limit pairs F1x[78,70,68,60,58,50,48,40] */ + struct dram_range ranges[DRAM_RANGES]; + + u64 top_mem; /* top of memory below 4GB */ + u64 top_mem2; /* top of memory above 4GB */ + + u32 dct_sel_lo; /* DRAM Controller Select Low */ + u32 dct_sel_hi; /* DRAM Controller Select High */ + u32 online_spare; /* On-Line spare Reg */ + + /* x4, x8, or x16 syndromes in use */ + u8 ecc_sym_sz; + + /* place to store error injection parameters prior to issue */ + struct error_injection injection; + + /* + * cache the dram_type + * + * NOTE: Don't use this for Family 17h and later. + * Use dram_type in struct amd64_umc instead. + */ + enum mem_type dram_type; + + struct amd64_umc *umc; /* UMC registers */ +}; + +enum err_codes { + DECODE_OK = 0, + ERR_NODE = -1, + ERR_CSROW = -2, + ERR_CHANNEL = -3, + ERR_SYND = -4, + ERR_NORM_ADDR = -5, +}; + +struct err_info { + int err_code; + struct mem_ctl_info *src_mci; + int csrow; + int channel; + u16 syndrome; + u32 page; + u32 offset; +}; + +static inline u32 get_umc_base(u8 channel) +{ + /* chY: 0xY50000 */ + return 0x50000 + (channel << 20); +} + +static inline u64 get_dram_base(struct amd64_pvt *pvt, u8 i) +{ + u64 addr = ((u64)pvt->ranges[i].base.lo & 0xffff0000) << 8; + + if (boot_cpu_data.x86 == 0xf) + return addr; + + return (((u64)pvt->ranges[i].base.hi & 0x000000ff) << 40) | addr; +} + +static inline u64 get_dram_limit(struct amd64_pvt *pvt, u8 i) +{ + u64 lim = (((u64)pvt->ranges[i].lim.lo & 0xffff0000) << 8) | 0x00ffffff; + + if (boot_cpu_data.x86 == 0xf) + return lim; + + return (((u64)pvt->ranges[i].lim.hi & 0x000000ff) << 40) | lim; +} + +static inline u16 extract_syndrome(u64 status) +{ + return ((status >> 47) & 0xff) | ((status >> 16) & 0xff00); +} + +static inline u8 dct_sel_interleave_addr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) + return (((pvt->dct_sel_hi >> 9) & 0x1) << 2) | + ((pvt->dct_sel_lo >> 6) & 0x3); + + return ((pvt)->dct_sel_lo >> 6) & 0x3; +} +/* + * per-node ECC settings descriptor + */ +struct ecc_settings { + u32 old_nbctl; + bool nbctl_valid; + + struct flags { + unsigned long nb_mce_enable:1; + unsigned long nb_ecc_prev:1; + } flags; +}; + +/* + * Each of the PCI Device IDs types have their own set of hardware accessor + * functions and per device encoding/decoding logic. + */ +struct low_ops { + int (*early_channel_count) (struct amd64_pvt *pvt); + void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr, + struct err_info *); + int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, + unsigned cs_mode, int cs_mask_nr); +}; + +struct amd64_family_flags { + /* + * Indicates that the system supports the new register offsets, etc. + * first introduced with Family 19h Model 10h. + */ + __u64 zn_regs_v2 : 1, + + __reserved : 63; +}; + +struct amd64_family_type { + const char *ctl_name; + u16 f0_id, f1_id, f2_id, f6_id; + /* Maximum number of memory controllers per die/node. */ + u8 max_mcs; + struct amd64_family_flags flags; + struct low_ops ops; +}; + +int __amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 *val, const char *func); +int __amd64_write_pci_cfg_dword(struct pci_dev *pdev, int offset, + u32 val, const char *func); + +#define amd64_read_pci_cfg(pdev, offset, val) \ + __amd64_read_pci_cfg_dword(pdev, offset, val, __func__) + +#define amd64_write_pci_cfg(pdev, offset, val) \ + __amd64_write_pci_cfg_dword(pdev, offset, val, __func__) + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +/* Injection helpers */ +static inline void disable_caches(void *dummy) +{ + write_cr0(read_cr0() | X86_CR0_CD); + wbinvd(); +} + +static inline void enable_caches(void *dummy) +{ + write_cr0(read_cr0() & ~X86_CR0_CD); +} + +static inline u8 dram_intlv_en(struct amd64_pvt *pvt, unsigned int i) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_LIMIT, &tmp); + return (u8) tmp & 0xF; + } + return (u8) (pvt->ranges[i].base.lo >> 8) & 0x7; +} + +static inline u8 dhar_valid(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 1) & BIT(0); + } + return (pvt)->dhar & BIT(0); +} + +static inline u32 dct_sel_baseaddr(struct amd64_pvt *pvt) +{ + if (pvt->fam == 0x15 && pvt->model >= 0x30) { + u32 tmp; + amd64_read_pci_cfg(pvt->F1, DRAM_CONT_BASE, &tmp); + return (tmp >> 11) & 0x1FFF; + } + return (pvt)->dct_sel_lo & 0xFFFFF800; +} diff --git a/drivers/edac/amd76x_edac.c b/drivers/edac/amd76x_edac.c new file mode 100644 index 000000000..2a49f68a7 --- /dev/null +++ b/drivers/edac/amd76x_edac.c @@ -0,0 +1,375 @@ +/* + * AMD 76x Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * $Id: edac_amd76x.c,v 1.4.2.5 2005/10/05 00:43:44 dsp_llnl Exp $ + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "amd76x_edac" + +#define amd76x_printk(level, fmt, arg...) \ + edac_printk(level, "amd76x", fmt, ##arg) + +#define amd76x_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "amd76x", fmt, ##arg) + +#define AMD76X_NR_CSROWS 8 +#define AMD76X_NR_DIMMS 4 + +/* AMD 76x register addresses - device 0 function 0 - PCI bridge */ + +#define AMD76X_ECC_MODE_STATUS 0x48 /* Mode and status of ECC (32b) + * + * 31:16 reserved + * 15:14 SERR enabled: x1=ue 1x=ce + * 13 reserved + * 12 diag: disabled, enabled + * 11:10 mode: dis, EC, ECC, ECC+scrub + * 9:8 status: x1=ue 1x=ce + * 7:4 UE cs row + * 3:0 CE cs row + */ + +#define AMD76X_DRAM_MODE_STATUS 0x58 /* DRAM Mode and status (32b) + * + * 31:26 clock disable 5 - 0 + * 25 SDRAM init + * 24 reserved + * 23 mode register service + * 22:21 suspend to RAM + * 20 burst refresh enable + * 19 refresh disable + * 18 reserved + * 17:16 cycles-per-refresh + * 15:8 reserved + * 7:0 x4 mode enable 7 - 0 + */ + +#define AMD76X_MEM_BASE_ADDR 0xC0 /* Memory base address (8 x 32b) + * + * 31:23 chip-select base + * 22:16 reserved + * 15:7 chip-select mask + * 6:3 reserved + * 2:1 address mode + * 0 chip-select enable + */ + +struct amd76x_error_info { + u32 ecc_mode_status; +}; + +enum amd76x_chips { + AMD761 = 0, + AMD762 +}; + +struct amd76x_dev_info { + const char *ctl_name; +}; + +static const struct amd76x_dev_info amd76x_devs[] = { + [AMD761] = { + .ctl_name = "AMD761"}, + [AMD762] = { + .ctl_name = "AMD762"}, +}; + +static struct edac_pci_ctl_info *amd76x_pci; + +/** + * amd76x_get_error_info - fetch error information + * @mci: Memory controller + * @info: Info to fill in + * + * Fetch and store the AMD76x ECC status. Clear pending status + * on the chip so that further errors will be reported + */ +static void amd76x_get_error_info(struct mem_ctl_info *mci, + struct amd76x_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, + &info->ecc_mode_status); + + if (info->ecc_mode_status & BIT(8)) + pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS, + (u32) BIT(8), (u32) BIT(8)); + + if (info->ecc_mode_status & BIT(9)) + pci_write_bits32(pdev, AMD76X_ECC_MODE_STATUS, + (u32) BIT(9), (u32) BIT(9)); +} + +/** + * amd76x_process_error_info - Error check + * @mci: Memory controller + * @info: Previously fetched information from chip + * @handle_errors: 1 if we should do recovery + * + * Process the chip state and decide if an error has occurred. + * A return of 1 indicates an error. Also if handle_errors is true + * then attempt to handle and clean up after the error + */ +static int amd76x_process_error_info(struct mem_ctl_info *mci, + struct amd76x_error_info *info, + int handle_errors) +{ + int error_found; + u32 row; + + error_found = 0; + + /* + * Check for an uncorrectable error + */ + if (info->ecc_mode_status & BIT(8)) { + error_found = 1; + + if (handle_errors) { + row = (info->ecc_mode_status >> 4) & 0xf; + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + mci->csrows[row]->first_page, 0, 0, + row, 0, -1, + mci->ctl_name, ""); + } + } + + /* + * Check for a correctable error + */ + if (info->ecc_mode_status & BIT(9)) { + error_found = 1; + + if (handle_errors) { + row = info->ecc_mode_status & 0xf; + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + mci->csrows[row]->first_page, 0, 0, + row, 0, -1, + mci->ctl_name, ""); + } + } + + return error_found; +} + +/** + * amd76x_check - Poll the controller + * @mci: Memory controller + * + * Called by the poll handlers this function reads the status + * from the controller and checks for errors. + */ +static void amd76x_check(struct mem_ctl_info *mci) +{ + struct amd76x_error_info info; + amd76x_get_error_info(mci, &info); + amd76x_process_error_info(mci, &info, 1); +} + +static void amd76x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, + enum edac_type edac_mode) +{ + struct csrow_info *csrow; + struct dimm_info *dimm; + u32 mba, mba_base, mba_mask, dms; + int index; + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + /* find the DRAM Chip Select Base address and mask */ + pci_read_config_dword(pdev, + AMD76X_MEM_BASE_ADDR + (index * 4), &mba); + + if (!(mba & BIT(0))) + continue; + + mba_base = mba & 0xff800000UL; + mba_mask = ((mba & 0xff80) << 16) | 0x7fffffUL; + pci_read_config_dword(pdev, AMD76X_DRAM_MODE_STATUS, &dms); + csrow->first_page = mba_base >> PAGE_SHIFT; + dimm->nr_pages = (mba_mask + 1) >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + dimm->nr_pages - 1; + csrow->page_mask = mba_mask >> PAGE_SHIFT; + dimm->grain = dimm->nr_pages << PAGE_SHIFT; + dimm->mtype = MEM_RDDR; + dimm->dtype = ((dms >> index) & 0x1) ? DEV_X4 : DEV_UNKNOWN; + dimm->edac_mode = edac_mode; + } +} + +/** + * amd76x_probe1 - Perform set up for detected device + * @pdev; PCI device detected + * @dev_idx: Device type index + * + * We have found an AMD76x and now need to set up the memory + * controller status reporting. We configure and set up the + * memory controller reporting and claim the device. + */ +static int amd76x_probe1(struct pci_dev *pdev, int dev_idx) +{ + static const enum edac_type ems_modes[] = { + EDAC_NONE, + EDAC_EC, + EDAC_SECDED, + EDAC_SECDED + }; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + u32 ems; + u32 ems_mode; + struct amd76x_error_info discard; + + edac_dbg(0, "\n"); + pci_read_config_dword(pdev, AMD76X_ECC_MODE_STATUS, &ems); + ems_mode = (ems >> 10) & 0x3; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = AMD76X_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "mci = %p\n", mci); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_RDDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + mci->edac_cap = ems_mode ? + (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = amd76x_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = amd76x_check; + mci->ctl_page_to_phys = NULL; + + amd76x_init_csrows(mci, pdev, ems_modes[ems_mode]); + amd76x_get_error_info(mci, &discard); /* clear counters */ + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail; + } + + /* allocating generic PCI control info */ + amd76x_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!amd76x_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int amd76x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + edac_dbg(0, "\n"); + + /* don't need to call pci_enable_device() */ + return amd76x_probe1(pdev, ent->driver_data); +} + +/** + * amd76x_remove_one - driver shutdown + * @pdev: PCI device being handed back + * + * Called when the driver is unloaded. Find the matching mci + * structure for the device then delete the mci and free the + * resources. + */ +static void amd76x_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (amd76x_pci) + edac_pci_release_generic_ctl(amd76x_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id amd76x_pci_tbl[] = { + { + PCI_VEND_DEV(AMD, FE_GATE_700C), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + AMD762}, + { + PCI_VEND_DEV(AMD, FE_GATE_700E), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + AMD761}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl); + +static struct pci_driver amd76x_driver = { + .name = EDAC_MOD_STR, + .probe = amd76x_init_one, + .remove = amd76x_remove_one, + .id_table = amd76x_pci_tbl, +}; + +static int __init amd76x_init(void) +{ + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + return pci_register_driver(&amd76x_driver); +} + +static void __exit amd76x_exit(void) +{ + pci_unregister_driver(&amd76x_driver); +} + +module_init(amd76x_init); +module_exit(amd76x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for AMD 76x memory controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c new file mode 100644 index 000000000..7508aa416 --- /dev/null +++ b/drivers/edac/amd8111_edac.c @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + * Benjamin Walsh <benjamin.walsh@windriver.com> + * Hu Yongqi <yongqi.hu@windriver.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/edac.h> +#include <linux/pci_ids.h> +#include <asm/io.h> + +#include "edac_module.h" +#include "amd8111_edac.h" + +#define AMD8111_EDAC_REVISION " Ver: 1.0.0" +#define AMD8111_EDAC_MOD_STR "amd8111_edac" + +#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 + +enum amd8111_edac_devs { + LPC_BRIDGE = 0, +}; + +enum amd8111_edac_pcis { + PCI_BRIDGE = 0, +}; + +/* Wrapper functions for accessing PCI configuration space */ +static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) +{ + int ret; + + ret = pci_read_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); + + return ret; +} + +static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8) +{ + int ret; + + ret = pci_read_config_byte(dev, reg, val8); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); +} + +static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) +{ + int ret; + + ret = pci_write_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8) +{ + int ret; + + ret = pci_write_config_byte(dev, reg, val8); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +/* + * device-specific methods for amd8111 PCI Bridge Controller + * + * Error Reporting and Handling for amd8111 chipset could be found + * in its datasheet 3.1.2 section, P37 + */ +static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info) +{ + u32 val32; + struct pci_dev *dev = pci_info->dev; + + /* First clear error detection flags on the host interface */ + + /* Clear SSE/SMA/STA flags in the global status register*/ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + if (val32 & PCI_STSCMD_CLEAR_MASK) + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Clear CRC and Link Fail flags in HT Link Control reg */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + if (val32 & HT_LINK_CLEAR_MASK) + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Second clear all fault on the secondary interface */ + + /* Clear error flags in the memory-base limit reg. */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_CLEAR_MASK) + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + /* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK) + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + + /* Last enable error detections */ + if (edac_op_state == EDAC_OPSTATE_POLL) { + /* Enable System Error reporting in global status register */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + val32 |= PCI_STSCMD_SERREN; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Enable CRC Sync flood packets to HyperTransport Link */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + val32 |= HT_LINK_CRCFEN; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Enable SSE reporting etc in Interrupt control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + val32 |= PCI_INTBRG_CTRL_POLL_MASK; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + } +} + +static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info) +{ + u32 val32; + struct pci_dev *dev = pci_info->dev; + + if (edac_op_state == EDAC_OPSTATE_POLL) { + /* Disable System Error reporting */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + val32 &= ~PCI_STSCMD_SERREN; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Disable CRC flood packets */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + val32 &= ~HT_LINK_CRCFEN; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + val32 &= ~PCI_INTBRG_CTRL_POLL_MASK; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + } +} + +static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev) +{ + struct amd8111_pci_info *pci_info = edac_dev->pvt_info; + struct pci_dev *dev = pci_info->dev; + u32 val32; + + /* Check out PCI Bridge Status and Command Register */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + if (val32 & PCI_STSCMD_CLEAR_MASK) { + printk(KERN_INFO "Error(s) in PCI bridge status and command" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n", + (val32 & PCI_STSCMD_SSE) != 0, + (val32 & PCI_STSCMD_RMA) != 0, + (val32 & PCI_STSCMD_RTA) != 0); + + val32 |= PCI_STSCMD_CLEAR_MASK; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out HyperTransport Link Control Register */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + if (val32 & HT_LINK_LKFAIL) { + printk(KERN_INFO "Error(s) in hypertransport link control" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "LKFAIL: %d\n", + (val32 & HT_LINK_LKFAIL) != 0); + + val32 |= HT_LINK_LKFAIL; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out PCI Interrupt and Bridge Control Register */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + if (val32 & PCI_INTBRG_CTRL_DTSTAT) { + printk(KERN_INFO "Error(s) in PCI interrupt and bridge control" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "DTSTAT: %d\n", + (val32 & PCI_INTBRG_CTRL_DTSTAT) != 0); + + val32 |= PCI_INTBRG_CTRL_DTSTAT; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out PCI Bridge Memory Base-Limit Register */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_CLEAR_MASK) { + printk(KERN_INFO + "Error(s) in mem limit register on %s device\n", + pci_info->ctl_name); + printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" + "RTA: %d, STA: %d, MDPE: %d\n", + (val32 & MEM_LIMIT_DPE) != 0, + (val32 & MEM_LIMIT_RSE) != 0, + (val32 & MEM_LIMIT_RMA) != 0, + (val32 & MEM_LIMIT_RTA) != 0, + (val32 & MEM_LIMIT_STA) != 0, + (val32 & MEM_LIMIT_MDPE) != 0); + + val32 |= MEM_LIMIT_CLEAR_MASK; + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } +} + +static struct resource *legacy_io_res; +static int at_compat_reg_broken; +#define LEGACY_NR_PORTS 1 + +/* device-specific methods for amd8111 LPC Bridge device */ +static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info) +{ + u8 val8; + struct pci_dev *dev = dev_info->dev; + + /* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */ + legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS, + AMD8111_EDAC_MOD_STR); + if (!legacy_io_res) + printk(KERN_INFO "%s: failed to request legacy I/O region " + "start %d, len %d\n", __func__, + REG_AT_COMPAT, LEGACY_NR_PORTS); + else { + val8 = __do_inb(REG_AT_COMPAT); + if (val8 == 0xff) { /* buggy port */ + printk(KERN_INFO "%s: port %d is buggy, not supported" + " by hardware?\n", __func__, REG_AT_COMPAT); + at_compat_reg_broken = 1; + release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); + legacy_io_res = NULL; + } else { + u8 out8 = 0; + if (val8 & AT_COMPAT_SERR) + out8 = AT_COMPAT_CLRSERR; + if (val8 & AT_COMPAT_IOCHK) + out8 |= AT_COMPAT_CLRIOCHK; + if (out8 > 0) + __do_outb(out8, REG_AT_COMPAT); + } + } + + /* Second clear error flags on LPC bridge */ + edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); + if (val8 & IO_CTRL_1_CLEAR_MASK) + edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); +} + +static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info) +{ + if (legacy_io_res) + release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); +} + +static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev) +{ + struct amd8111_dev_info *dev_info = edac_dev->pvt_info; + struct pci_dev *dev = dev_info->dev; + u8 val8; + + edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); + if (val8 & IO_CTRL_1_CLEAR_MASK) { + printk(KERN_INFO + "Error(s) in IO control register on %s device\n", + dev_info->ctl_name); + printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n", + (val8 & IO_CTRL_1_LPC_ERR) != 0, + (val8 & IO_CTRL_1_PW2LPC) != 0); + + val8 |= IO_CTRL_1_CLEAR_MASK; + edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); + + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); + } + + if (at_compat_reg_broken == 0) { + u8 out8 = 0; + val8 = __do_inb(REG_AT_COMPAT); + if (val8 & AT_COMPAT_SERR) + out8 = AT_COMPAT_CLRSERR; + if (val8 & AT_COMPAT_IOCHK) + out8 |= AT_COMPAT_CLRIOCHK; + if (out8 > 0) { + __do_outb(out8, REG_AT_COMPAT); + edac_device_handle_ue(edac_dev, 0, 0, + edac_dev->ctl_name); + } + } +} + +/* General devices represented by edac_device_ctl_info */ +static struct amd8111_dev_info amd8111_devices[] = { + [LPC_BRIDGE] = { + .err_dev = PCI_DEVICE_ID_AMD_8111_LPC, + .ctl_name = "lpc", + .init = amd8111_lpc_bridge_init, + .exit = amd8111_lpc_bridge_exit, + .check = amd8111_lpc_bridge_check, + }, + {0}, +}; + +/* PCI controllers represented by edac_pci_ctl_info */ +static struct amd8111_pci_info amd8111_pcis[] = { + [PCI_BRIDGE] = { + .err_dev = PCI_DEVICE_ID_AMD_8111_PCI, + .ctl_name = "AMD8111_PCI_Controller", + .init = amd8111_pci_bridge_init, + .exit = amd8111_pci_bridge_exit, + .check = amd8111_pci_bridge_check, + }, + {0}, +}; + +static int amd8111_dev_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data]; + int ret = -ENODEV; + + dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, + dev_info->err_dev, NULL); + + if (!dev_info->dev) { + printk(KERN_ERR "EDAC device not found:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + goto err; + } + + if (pci_enable_device(dev_info->dev)) { + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + goto err_dev_put; + } + + /* + * we do not allocate extra private structure for + * edac_device_ctl_info, but make use of existing + * one instead. + */ + dev_info->edac_idx = edac_device_alloc_index(); + dev_info->edac_dev = + edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1, + NULL, 0, 0, + NULL, 0, dev_info->edac_idx); + if (!dev_info->edac_dev) { + ret = -ENOMEM; + goto err_dev_put; + } + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->dev->dev; + dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = dev_info->check; + + if (dev_info->init) + dev_info->init(dev_info); + + if (edac_device_add_device(dev_info->edac_dev) > 0) { + printk(KERN_ERR "failed to add edac_dev for %s\n", + dev_info->ctl_name); + goto err_edac_free_ctl; + } + + printk(KERN_INFO "added one edac_dev on AMD8111 " + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + + return 0; + +err_edac_free_ctl: + edac_device_free_ctl_info(dev_info->edac_dev); +err_dev_put: + pci_dev_put(dev_info->dev); +err: + return ret; +} + +static void amd8111_dev_remove(struct pci_dev *dev) +{ + struct amd8111_dev_info *dev_info; + + for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++) + if (dev_info->dev->device == dev->device) + break; + + if (!dev_info->err_dev) /* should never happen */ + return; + + if (dev_info->edac_dev) { + edac_device_del_device(dev_info->edac_dev->dev); + edac_device_free_ctl_info(dev_info->edac_dev); + } + + if (dev_info->exit) + dev_info->exit(dev_info); + + pci_dev_put(dev_info->dev); +} + +static int amd8111_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data]; + int ret = -ENODEV; + + pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, + pci_info->err_dev, NULL); + + if (!pci_info->dev) { + printk(KERN_ERR "EDAC device not found:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + goto err; + } + + if (pci_enable_device(pci_info->dev)) { + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + goto err_dev_put; + } + + /* + * we do not allocate extra private structure for + * edac_pci_ctl_info, but make use of existing + * one instead. + */ + pci_info->edac_idx = edac_pci_alloc_index(); + pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name); + if (!pci_info->edac_dev) { + ret = -ENOMEM; + goto err_dev_put; + } + + pci_info->edac_dev->pvt_info = pci_info; + pci_info->edac_dev->dev = &pci_info->dev->dev; + pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; + pci_info->edac_dev->ctl_name = pci_info->ctl_name; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + pci_info->edac_dev->edac_check = pci_info->check; + + if (pci_info->init) + pci_info->init(pci_info); + + if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) { + printk(KERN_ERR "failed to add edac_pci for %s\n", + pci_info->ctl_name); + goto err_edac_free_ctl; + } + + printk(KERN_INFO "added one edac_pci on AMD8111 " + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + + return 0; + +err_edac_free_ctl: + edac_pci_free_ctl_info(pci_info->edac_dev); +err_dev_put: + pci_dev_put(pci_info->dev); +err: + return ret; +} + +static void amd8111_pci_remove(struct pci_dev *dev) +{ + struct amd8111_pci_info *pci_info; + + for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++) + if (pci_info->dev->device == dev->device) + break; + + if (!pci_info->err_dev) /* should never happen */ + return; + + if (pci_info->edac_dev) { + edac_pci_del_device(pci_info->edac_dev->dev); + edac_pci_free_ctl_info(pci_info->edac_dev); + } + + if (pci_info->exit) + pci_info->exit(pci_info); + + pci_dev_put(pci_info->dev); +} + +/* PCI Device ID talbe for general EDAC device */ +static const struct pci_device_id amd8111_edac_dev_tbl[] = { + { + PCI_VEND_DEV(AMD, 8111_LPC), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = LPC_BRIDGE, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl); + +static struct pci_driver amd8111_edac_dev_driver = { + .name = "AMD8111_EDAC_DEV", + .probe = amd8111_dev_probe, + .remove = amd8111_dev_remove, + .id_table = amd8111_edac_dev_tbl, +}; + +/* PCI Device ID table for EDAC PCI controller */ +static const struct pci_device_id amd8111_edac_pci_tbl[] = { + { + PCI_VEND_DEV(AMD, 8111_PCI), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = PCI_BRIDGE, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl); + +static struct pci_driver amd8111_edac_pci_driver = { + .name = "AMD8111_EDAC_PCI", + .probe = amd8111_pci_probe, + .remove = amd8111_pci_remove, + .id_table = amd8111_edac_pci_tbl, +}; + +static int __init amd8111_edac_init(void) +{ + int val; + + printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n"); + printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); + + /* Only POLL mode supported so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + val = pci_register_driver(&amd8111_edac_dev_driver); + val |= pci_register_driver(&amd8111_edac_pci_driver); + + return val; +} + +static void __exit amd8111_edac_exit(void) +{ + pci_unregister_driver(&amd8111_edac_pci_driver); + pci_unregister_driver(&amd8111_edac_dev_driver); +} + + +module_init(amd8111_edac_init); +module_exit(amd8111_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>\n"); +MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module"); diff --git a/drivers/edac/amd8111_edac.h b/drivers/edac/amd8111_edac.h new file mode 100644 index 000000000..200cab1b3 --- /dev/null +++ b/drivers/edac/amd8111_edac.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * amd8111_edac.h, EDAC defs for AMD8111 hypertransport chip + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + * Benjamin Walsh <benjamin.walsh@windriver.com> + * Hu Yongqi <yongqi.hu@windriver.com> + */ + +#ifndef _AMD8111_EDAC_H_ +#define _AMD8111_EDAC_H_ + +/************************************************************ + * PCI Bridge Status and Command Register, DevA:0x04 + ************************************************************/ +#define REG_PCI_STSCMD 0x04 +enum pci_stscmd_bits { + PCI_STSCMD_SSE = BIT(30), + PCI_STSCMD_RMA = BIT(29), + PCI_STSCMD_RTA = BIT(28), + PCI_STSCMD_SERREN = BIT(8), + PCI_STSCMD_CLEAR_MASK = (PCI_STSCMD_SSE | + PCI_STSCMD_RMA | + PCI_STSCMD_RTA) +}; + +/************************************************************ + * PCI Bridge Memory Base-Limit Register, DevA:0x1c + ************************************************************/ +#define REG_MEM_LIM 0x1c +enum mem_limit_bits { + MEM_LIMIT_DPE = BIT(31), + MEM_LIMIT_RSE = BIT(30), + MEM_LIMIT_RMA = BIT(29), + MEM_LIMIT_RTA = BIT(28), + MEM_LIMIT_STA = BIT(27), + MEM_LIMIT_MDPE = BIT(24), + MEM_LIMIT_CLEAR_MASK = (MEM_LIMIT_DPE | + MEM_LIMIT_RSE | + MEM_LIMIT_RMA | + MEM_LIMIT_RTA | + MEM_LIMIT_STA | + MEM_LIMIT_MDPE) +}; + +/************************************************************ + * HyperTransport Link Control Register, DevA:0xc4 + ************************************************************/ +#define REG_HT_LINK 0xc4 +enum ht_link_bits { + HT_LINK_LKFAIL = BIT(4), + HT_LINK_CRCFEN = BIT(1), + HT_LINK_CLEAR_MASK = (HT_LINK_LKFAIL) +}; + +/************************************************************ + * PCI Bridge Interrupt and Bridge Control, DevA:0x3c + ************************************************************/ +#define REG_PCI_INTBRG_CTRL 0x3c +enum pci_intbrg_ctrl_bits { + PCI_INTBRG_CTRL_DTSERREN = BIT(27), + PCI_INTBRG_CTRL_DTSTAT = BIT(26), + PCI_INTBRG_CTRL_MARSP = BIT(21), + PCI_INTBRG_CTRL_SERREN = BIT(17), + PCI_INTBRG_CTRL_PEREN = BIT(16), + PCI_INTBRG_CTRL_CLEAR_MASK = (PCI_INTBRG_CTRL_DTSTAT), + PCI_INTBRG_CTRL_POLL_MASK = (PCI_INTBRG_CTRL_DTSERREN | + PCI_INTBRG_CTRL_MARSP | + PCI_INTBRG_CTRL_SERREN) +}; + +/************************************************************ + * I/O Control 1 Register, DevB:0x40 + ************************************************************/ +#define REG_IO_CTRL_1 0x40 +enum io_ctrl_1_bits { + IO_CTRL_1_NMIONERR = BIT(7), + IO_CTRL_1_LPC_ERR = BIT(6), + IO_CTRL_1_PW2LPC = BIT(1), + IO_CTRL_1_CLEAR_MASK = (IO_CTRL_1_LPC_ERR | IO_CTRL_1_PW2LPC) +}; + +/************************************************************ + * Legacy I/O Space Registers + ************************************************************/ +#define REG_AT_COMPAT 0x61 +enum at_compat_bits { + AT_COMPAT_SERR = BIT(7), + AT_COMPAT_IOCHK = BIT(6), + AT_COMPAT_CLRIOCHK = BIT(3), + AT_COMPAT_CLRSERR = BIT(2), +}; + +struct amd8111_dev_info { + u16 err_dev; /* PCI Device ID */ + struct pci_dev *dev; + int edac_idx; /* device index */ + char *ctl_name; + struct edac_device_ctl_info *edac_dev; + void (*init)(struct amd8111_dev_info *dev_info); + void (*exit)(struct amd8111_dev_info *dev_info); + void (*check)(struct edac_device_ctl_info *edac_dev); +}; + +struct amd8111_pci_info { + u16 err_dev; /* PCI Device ID */ + struct pci_dev *dev; + int edac_idx; /* pci index */ + const char *ctl_name; + struct edac_pci_ctl_info *edac_dev; + void (*init)(struct amd8111_pci_info *dev_info); + void (*exit)(struct amd8111_pci_info *dev_info); + void (*check)(struct edac_pci_ctl_info *edac_dev); +}; + +#endif /* _AMD8111_EDAC_H_ */ diff --git a/drivers/edac/amd8131_edac.c b/drivers/edac/amd8131_edac.c new file mode 100644 index 000000000..169353710 --- /dev/null +++ b/drivers/edac/amd8131_edac.c @@ -0,0 +1,358 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * amd8131_edac.c, AMD8131 hypertransport chip EDAC kernel module + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + * Benjamin Walsh <benjamin.walsh@windriver.com> + * Hu Yongqi <yongqi.hu@windriver.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/edac.h> +#include <linux/pci_ids.h> + +#include "edac_module.h" +#include "amd8131_edac.h" + +#define AMD8131_EDAC_REVISION " Ver: 1.0.0" +#define AMD8131_EDAC_MOD_STR "amd8131_edac" + +/* Wrapper functions for accessing PCI configuration space */ +static void edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) +{ + int ret; + + ret = pci_read_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8131_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); +} + +static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) +{ + int ret; + + ret = pci_write_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8131_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +/* Support up to two AMD8131 chipsets on a platform */ +static struct amd8131_dev_info amd8131_devices[] = { + { + .inst = NORTH_A, + .devfn = DEVFN_PCIX_BRIDGE_NORTH_A, + .ctl_name = "AMD8131_PCIX_NORTH_A", + }, + { + .inst = NORTH_B, + .devfn = DEVFN_PCIX_BRIDGE_NORTH_B, + .ctl_name = "AMD8131_PCIX_NORTH_B", + }, + { + .inst = SOUTH_A, + .devfn = DEVFN_PCIX_BRIDGE_SOUTH_A, + .ctl_name = "AMD8131_PCIX_SOUTH_A", + }, + { + .inst = SOUTH_B, + .devfn = DEVFN_PCIX_BRIDGE_SOUTH_B, + .ctl_name = "AMD8131_PCIX_SOUTH_B", + }, + {.inst = NO_BRIDGE,}, +}; + +static void amd8131_pcix_init(struct amd8131_dev_info *dev_info) +{ + u32 val32; + struct pci_dev *dev = dev_info->dev; + + /* First clear error detection flags */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_MASK) + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + /* Clear Discard Timer Timedout flag */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + if (val32 & INT_CTLR_DTS) + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Clear CRC Error flag on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + if (val32 & LNK_CTRL_CRCERR_A) + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Clear CRC Error flag on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + if (val32 & LNK_CTRL_CRCERR_B) + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); + + /* + * Then enable all error detections. + * + * Setup Discard Timer Sync Flood Enable, + * System Error Enable and Parity Error Enable. + */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + val32 |= INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE; + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Enable overall SERR Error detection */ + edac_pci_read_dword(dev, REG_STS_CMD, &val32); + val32 |= STS_CMD_SERREN; + edac_pci_write_dword(dev, REG_STS_CMD, val32); + + /* Setup CRC Flood Enable for link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + val32 |= LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Setup CRC Flood Enable for link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + val32 |= LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); +} + +static void amd8131_pcix_exit(struct amd8131_dev_info *dev_info) +{ + u32 val32; + struct pci_dev *dev = dev_info->dev; + + /* Disable SERR, PERR and DTSE Error detection */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + val32 &= ~(INT_CTLR_PERR | INT_CTLR_SERR | INT_CTLR_DTSE); + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + /* Disable overall System Error detection */ + edac_pci_read_dword(dev, REG_STS_CMD, &val32); + val32 &= ~STS_CMD_SERREN; + edac_pci_write_dword(dev, REG_STS_CMD, val32); + + /* Disable CRC Sync Flood on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + val32 &= ~LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + /* Disable CRC Sync Flood on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + val32 &= ~LNK_CTRL_CRCFEN; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); +} + +static void amd8131_pcix_check(struct edac_pci_ctl_info *edac_dev) +{ + struct amd8131_dev_info *dev_info = edac_dev->pvt_info; + struct pci_dev *dev = dev_info->dev; + u32 val32; + + /* Check PCI-X Bridge Memory Base-Limit Register for errors */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_MASK) { + printk(KERN_INFO "Error(s) in mem limit register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" + "RTA: %d, STA: %d, MDPE: %d\n", + val32 & MEM_LIMIT_DPE, + val32 & MEM_LIMIT_RSE, + val32 & MEM_LIMIT_RMA, + val32 & MEM_LIMIT_RTA, + val32 & MEM_LIMIT_STA, + val32 & MEM_LIMIT_MDPE); + + val32 |= MEM_LIMIT_MASK; + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if Discard Timer timed out */ + edac_pci_read_dword(dev, REG_INT_CTLR, &val32); + if (val32 & INT_CTLR_DTS) { + printk(KERN_INFO "Error(s) in interrupt and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "DTS: %d\n", val32 & INT_CTLR_DTS); + + val32 |= INT_CTLR_DTS; + edac_pci_write_dword(dev, REG_INT_CTLR, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if CRC error happens on link side A */ + edac_pci_read_dword(dev, REG_LNK_CTRL_A, &val32); + if (val32 & LNK_CTRL_CRCERR_A) { + printk(KERN_INFO "Error(s) in link conf and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_A); + + val32 |= LNK_CTRL_CRCERR_A; + edac_pci_write_dword(dev, REG_LNK_CTRL_A, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check if CRC error happens on link side B */ + edac_pci_read_dword(dev, REG_LNK_CTRL_B, &val32); + if (val32 & LNK_CTRL_CRCERR_B) { + printk(KERN_INFO "Error(s) in link conf and control register " + "on %s bridge\n", dev_info->ctl_name); + printk(KERN_INFO "CRCERR: %d\n", val32 & LNK_CTRL_CRCERR_B); + + val32 |= LNK_CTRL_CRCERR_B; + edac_pci_write_dword(dev, REG_LNK_CTRL_B, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } +} + +static struct amd8131_info amd8131_chipset = { + .err_dev = PCI_DEVICE_ID_AMD_8131_APIC, + .devices = amd8131_devices, + .init = amd8131_pcix_init, + .exit = amd8131_pcix_exit, + .check = amd8131_pcix_check, +}; + +/* + * There are 4 PCIX Bridges on ATCA-6101 that share the same PCI Device ID, + * so amd8131_probe() would be called by kernel 4 times, with different + * address of pci_dev for each of them each time. + */ +static int amd8131_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct amd8131_dev_info *dev_info; + + for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; + dev_info++) + if (dev_info->devfn == dev->devfn) + break; + + if (dev_info->inst == NO_BRIDGE) /* should never happen */ + return -ENODEV; + + /* + * We can't call pci_get_device() as we are used to do because + * there are 4 of them but pci_dev_get() instead. + */ + dev_info->dev = pci_dev_get(dev); + + if (pci_enable_device(dev_info->dev)) { + pci_dev_put(dev_info->dev); + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, devfn %x, name %s\n", + PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, + dev_info->devfn, dev_info->ctl_name); + return -ENODEV; + } + + /* + * we do not allocate extra private structure for + * edac_pci_ctl_info, but make use of existing + * one instead. + */ + dev_info->edac_idx = edac_pci_alloc_index(); + dev_info->edac_dev = edac_pci_alloc_ctl_info(0, dev_info->ctl_name); + if (!dev_info->edac_dev) + return -ENOMEM; + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->dev->dev; + dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = amd8131_chipset.check; + + if (amd8131_chipset.init) + amd8131_chipset.init(dev_info); + + if (edac_pci_add_device(dev_info->edac_dev, dev_info->edac_idx) > 0) { + printk(KERN_ERR "failed edac_pci_add_device() for %s\n", + dev_info->ctl_name); + edac_pci_free_ctl_info(dev_info->edac_dev); + return -ENODEV; + } + + printk(KERN_INFO "added one device on AMD8131 " + "vendor %x, device %x, devfn %x, name %s\n", + PCI_VENDOR_ID_AMD, amd8131_chipset.err_dev, + dev_info->devfn, dev_info->ctl_name); + + return 0; +} + +static void amd8131_remove(struct pci_dev *dev) +{ + struct amd8131_dev_info *dev_info; + + for (dev_info = amd8131_chipset.devices; dev_info->inst != NO_BRIDGE; + dev_info++) + if (dev_info->devfn == dev->devfn) + break; + + if (dev_info->inst == NO_BRIDGE) /* should never happen */ + return; + + if (dev_info->edac_dev) { + edac_pci_del_device(dev_info->edac_dev->dev); + edac_pci_free_ctl_info(dev_info->edac_dev); + } + + if (amd8131_chipset.exit) + amd8131_chipset.exit(dev_info); + + pci_dev_put(dev_info->dev); +} + +static const struct pci_device_id amd8131_edac_pci_tbl[] = { + { + PCI_VEND_DEV(AMD, 8131_BRIDGE), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = 0, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8131_edac_pci_tbl); + +static struct pci_driver amd8131_edac_driver = { + .name = AMD8131_EDAC_MOD_STR, + .probe = amd8131_probe, + .remove = amd8131_remove, + .id_table = amd8131_edac_pci_tbl, +}; + +static int __init amd8131_edac_init(void) +{ + printk(KERN_INFO "AMD8131 EDAC driver " AMD8131_EDAC_REVISION "\n"); + printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); + + /* Only POLL mode supported so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + return pci_register_driver(&amd8131_edac_driver); +} + +static void __exit amd8131_edac_exit(void) +{ + pci_unregister_driver(&amd8131_edac_driver); +} + +module_init(amd8131_edac_init); +module_exit(amd8131_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>\n"); +MODULE_DESCRIPTION("AMD8131 HyperTransport PCI-X Tunnel EDAC kernel module"); diff --git a/drivers/edac/amd8131_edac.h b/drivers/edac/amd8131_edac.h new file mode 100644 index 000000000..5f362abda --- /dev/null +++ b/drivers/edac/amd8131_edac.h @@ -0,0 +1,107 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * amd8131_edac.h, EDAC defs for AMD8131 hypertransport chip + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + * Benjamin Walsh <benjamin.walsh@windriver.com> + * Hu Yongqi <yongqi.hu@windriver.com> + */ + +#ifndef _AMD8131_EDAC_H_ +#define _AMD8131_EDAC_H_ + +#define DEVFN_PCIX_BRIDGE_NORTH_A 8 +#define DEVFN_PCIX_BRIDGE_NORTH_B 16 +#define DEVFN_PCIX_BRIDGE_SOUTH_A 24 +#define DEVFN_PCIX_BRIDGE_SOUTH_B 32 + +/************************************************************ + * PCI-X Bridge Status and Command Register, DevA:0x04 + ************************************************************/ +#define REG_STS_CMD 0x04 +enum sts_cmd_bits { + STS_CMD_SSE = BIT(30), + STS_CMD_SERREN = BIT(8) +}; + +/************************************************************ + * PCI-X Bridge Interrupt and Bridge Control Register, + ************************************************************/ +#define REG_INT_CTLR 0x3c +enum int_ctlr_bits { + INT_CTLR_DTSE = BIT(27), + INT_CTLR_DTS = BIT(26), + INT_CTLR_SERR = BIT(17), + INT_CTLR_PERR = BIT(16) +}; + +/************************************************************ + * PCI-X Bridge Memory Base-Limit Register, DevA:0x1C + ************************************************************/ +#define REG_MEM_LIM 0x1c +enum mem_limit_bits { + MEM_LIMIT_DPE = BIT(31), + MEM_LIMIT_RSE = BIT(30), + MEM_LIMIT_RMA = BIT(29), + MEM_LIMIT_RTA = BIT(28), + MEM_LIMIT_STA = BIT(27), + MEM_LIMIT_MDPE = BIT(24), + MEM_LIMIT_MASK = MEM_LIMIT_DPE|MEM_LIMIT_RSE|MEM_LIMIT_RMA| + MEM_LIMIT_RTA|MEM_LIMIT_STA|MEM_LIMIT_MDPE +}; + +/************************************************************ + * Link Configuration And Control Register, side A + ************************************************************/ +#define REG_LNK_CTRL_A 0xc4 + +/************************************************************ + * Link Configuration And Control Register, side B + ************************************************************/ +#define REG_LNK_CTRL_B 0xc8 + +enum lnk_ctrl_bits { + LNK_CTRL_CRCERR_A = BIT(9), + LNK_CTRL_CRCERR_B = BIT(8), + LNK_CTRL_CRCFEN = BIT(1) +}; + +enum pcix_bridge_inst { + NORTH_A = 0, + NORTH_B = 1, + SOUTH_A = 2, + SOUTH_B = 3, + NO_BRIDGE = 4 +}; + +struct amd8131_dev_info { + int devfn; + enum pcix_bridge_inst inst; + struct pci_dev *dev; + int edac_idx; /* pci device index */ + char *ctl_name; + struct edac_pci_ctl_info *edac_dev; +}; + +/* + * AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC + * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are + * four PCIX Bridges on ATCA-6101 altogether. + * + * These PCIX Bridges share the same PCI Device ID and are all of + * Function Zero, they could be discrimated by their pci_dev->devfn. + * They share the same set of init/check/exit methods, and their + * private structures are collected in the devices[] array. + */ +struct amd8131_info { + u16 err_dev; /* PCI Device ID for AMD8131 APIC*/ + struct amd8131_dev_info *devices; + void (*init)(struct amd8131_dev_info *dev_info); + void (*exit)(struct amd8131_dev_info *dev_info); + void (*check)(struct edac_pci_ctl_info *edac_dev); +}; + +#endif /* _AMD8131_EDAC_H_ */ + diff --git a/drivers/edac/armada_xp_edac.c b/drivers/edac/armada_xp_edac.c new file mode 100644 index 000000000..038abbb83 --- /dev/null +++ b/drivers/edac/armada_xp_edac.c @@ -0,0 +1,621 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Pengutronix, Jan Luebbe <kernel@pengutronix.de> + */ + +#include <linux/kernel.h> +#include <linux/edac.h> +#include <linux/of_platform.h> + +#include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/cache-aurora-l2.h> + +#include "edac_mc.h" +#include "edac_device.h" +#include "edac_module.h" + +/************************ EDAC MC (DDR RAM) ********************************/ + +#define SDRAM_NUM_CS 4 + +#define SDRAM_CONFIG_REG 0x0 +#define SDRAM_CONFIG_ECC_MASK BIT(18) +#define SDRAM_CONFIG_REGISTERED_MASK BIT(17) +#define SDRAM_CONFIG_BUS_WIDTH_MASK BIT(15) + +#define SDRAM_ADDR_CTRL_REG 0x10 +#define SDRAM_ADDR_CTRL_SIZE_HIGH_OFFSET(cs) (20+cs) +#define SDRAM_ADDR_CTRL_SIZE_HIGH_MASK(cs) (0x1 << SDRAM_ADDR_CTRL_SIZE_HIGH_OFFSET(cs)) +#define SDRAM_ADDR_CTRL_ADDR_SEL_MASK(cs) BIT(16+cs) +#define SDRAM_ADDR_CTRL_SIZE_LOW_OFFSET(cs) (cs*4+2) +#define SDRAM_ADDR_CTRL_SIZE_LOW_MASK(cs) (0x3 << SDRAM_ADDR_CTRL_SIZE_LOW_OFFSET(cs)) +#define SDRAM_ADDR_CTRL_STRUCT_OFFSET(cs) (cs*4) +#define SDRAM_ADDR_CTRL_STRUCT_MASK(cs) (0x3 << SDRAM_ADDR_CTRL_STRUCT_OFFSET(cs)) + +#define SDRAM_ERR_DATA_H_REG 0x40 +#define SDRAM_ERR_DATA_L_REG 0x44 + +#define SDRAM_ERR_RECV_ECC_REG 0x48 +#define SDRAM_ERR_RECV_ECC_VALUE_MASK 0xff + +#define SDRAM_ERR_CALC_ECC_REG 0x4c +#define SDRAM_ERR_CALC_ECC_ROW_OFFSET 8 +#define SDRAM_ERR_CALC_ECC_ROW_MASK (0xffff << SDRAM_ERR_CALC_ECC_ROW_OFFSET) +#define SDRAM_ERR_CALC_ECC_VALUE_MASK 0xff + +#define SDRAM_ERR_ADDR_REG 0x50 +#define SDRAM_ERR_ADDR_BANK_OFFSET 23 +#define SDRAM_ERR_ADDR_BANK_MASK (0x7 << SDRAM_ERR_ADDR_BANK_OFFSET) +#define SDRAM_ERR_ADDR_COL_OFFSET 8 +#define SDRAM_ERR_ADDR_COL_MASK (0x7fff << SDRAM_ERR_ADDR_COL_OFFSET) +#define SDRAM_ERR_ADDR_CS_OFFSET 1 +#define SDRAM_ERR_ADDR_CS_MASK (0x3 << SDRAM_ERR_ADDR_CS_OFFSET) +#define SDRAM_ERR_ADDR_TYPE_MASK BIT(0) + +#define SDRAM_ERR_CTRL_REG 0x54 +#define SDRAM_ERR_CTRL_THR_OFFSET 16 +#define SDRAM_ERR_CTRL_THR_MASK (0xff << SDRAM_ERR_CTRL_THR_OFFSET) +#define SDRAM_ERR_CTRL_PROP_MASK BIT(9) + +#define SDRAM_ERR_SBE_COUNT_REG 0x58 +#define SDRAM_ERR_DBE_COUNT_REG 0x5c + +#define SDRAM_ERR_CAUSE_ERR_REG 0xd0 +#define SDRAM_ERR_CAUSE_MSG_REG 0xd8 +#define SDRAM_ERR_CAUSE_DBE_MASK BIT(1) +#define SDRAM_ERR_CAUSE_SBE_MASK BIT(0) + +#define SDRAM_RANK_CTRL_REG 0x1e0 +#define SDRAM_RANK_CTRL_EXIST_MASK(cs) BIT(cs) + +struct axp_mc_drvdata { + void __iomem *base; + /* width in bytes */ + unsigned int width; + /* bank interleaving */ + bool cs_addr_sel[SDRAM_NUM_CS]; + + char msg[128]; +}; + +/* derived from "DRAM Address Multiplexing" in the ARMADA XP Functional Spec */ +static uint32_t axp_mc_calc_address(struct axp_mc_drvdata *drvdata, + uint8_t cs, uint8_t bank, uint16_t row, + uint16_t col) +{ + if (drvdata->width == 8) { + /* 64 bit */ + if (drvdata->cs_addr_sel[cs]) + /* bank interleaved */ + return (((row & 0xfff8) << 16) | + ((bank & 0x7) << 16) | + ((row & 0x7) << 13) | + ((col & 0x3ff) << 3)); + else + return (((row & 0xffff << 16) | + ((bank & 0x7) << 13) | + ((col & 0x3ff)) << 3)); + } else if (drvdata->width == 4) { + /* 32 bit */ + if (drvdata->cs_addr_sel[cs]) + /* bank interleaved */ + return (((row & 0xfff0) << 15) | + ((bank & 0x7) << 16) | + ((row & 0xf) << 12) | + ((col & 0x3ff) << 2)); + else + return (((row & 0xffff << 15) | + ((bank & 0x7) << 12) | + ((col & 0x3ff)) << 2)); + } else { + /* 16 bit */ + if (drvdata->cs_addr_sel[cs]) + /* bank interleaved */ + return (((row & 0xffe0) << 14) | + ((bank & 0x7) << 16) | + ((row & 0x1f) << 11) | + ((col & 0x3ff) << 1)); + else + return (((row & 0xffff << 14) | + ((bank & 0x7) << 11) | + ((col & 0x3ff)) << 1)); + } +} + +static void axp_mc_check(struct mem_ctl_info *mci) +{ + struct axp_mc_drvdata *drvdata = mci->pvt_info; + uint32_t data_h, data_l, recv_ecc, calc_ecc, addr; + uint32_t cnt_sbe, cnt_dbe, cause_err, cause_msg; + uint32_t row_val, col_val, bank_val, addr_val; + uint8_t syndrome_val, cs_val; + char *msg = drvdata->msg; + + data_h = readl(drvdata->base + SDRAM_ERR_DATA_H_REG); + data_l = readl(drvdata->base + SDRAM_ERR_DATA_L_REG); + recv_ecc = readl(drvdata->base + SDRAM_ERR_RECV_ECC_REG); + calc_ecc = readl(drvdata->base + SDRAM_ERR_CALC_ECC_REG); + addr = readl(drvdata->base + SDRAM_ERR_ADDR_REG); + cnt_sbe = readl(drvdata->base + SDRAM_ERR_SBE_COUNT_REG); + cnt_dbe = readl(drvdata->base + SDRAM_ERR_DBE_COUNT_REG); + cause_err = readl(drvdata->base + SDRAM_ERR_CAUSE_ERR_REG); + cause_msg = readl(drvdata->base + SDRAM_ERR_CAUSE_MSG_REG); + + /* clear cause registers */ + writel(~(SDRAM_ERR_CAUSE_DBE_MASK | SDRAM_ERR_CAUSE_SBE_MASK), + drvdata->base + SDRAM_ERR_CAUSE_ERR_REG); + writel(~(SDRAM_ERR_CAUSE_DBE_MASK | SDRAM_ERR_CAUSE_SBE_MASK), + drvdata->base + SDRAM_ERR_CAUSE_MSG_REG); + + /* clear error counter registers */ + if (cnt_sbe) + writel(0, drvdata->base + SDRAM_ERR_SBE_COUNT_REG); + if (cnt_dbe) + writel(0, drvdata->base + SDRAM_ERR_DBE_COUNT_REG); + + if (!cnt_sbe && !cnt_dbe) + return; + + if (!(addr & SDRAM_ERR_ADDR_TYPE_MASK)) { + if (cnt_sbe) + cnt_sbe--; + else + dev_warn(mci->pdev, "inconsistent SBE count detected\n"); + } else { + if (cnt_dbe) + cnt_dbe--; + else + dev_warn(mci->pdev, "inconsistent DBE count detected\n"); + } + + /* report earlier errors */ + if (cnt_sbe) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + cnt_sbe, /* error count */ + 0, 0, 0, /* pfn, offset, syndrome */ + -1, -1, -1, /* top, mid, low layer */ + mci->ctl_name, + "details unavailable (multiple errors)"); + if (cnt_dbe) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + cnt_dbe, /* error count */ + 0, 0, 0, /* pfn, offset, syndrome */ + -1, -1, -1, /* top, mid, low layer */ + mci->ctl_name, + "details unavailable (multiple errors)"); + + /* report details for most recent error */ + cs_val = (addr & SDRAM_ERR_ADDR_CS_MASK) >> SDRAM_ERR_ADDR_CS_OFFSET; + bank_val = (addr & SDRAM_ERR_ADDR_BANK_MASK) >> SDRAM_ERR_ADDR_BANK_OFFSET; + row_val = (calc_ecc & SDRAM_ERR_CALC_ECC_ROW_MASK) >> SDRAM_ERR_CALC_ECC_ROW_OFFSET; + col_val = (addr & SDRAM_ERR_ADDR_COL_MASK) >> SDRAM_ERR_ADDR_COL_OFFSET; + syndrome_val = (recv_ecc ^ calc_ecc) & 0xff; + addr_val = axp_mc_calc_address(drvdata, cs_val, bank_val, row_val, + col_val); + msg += sprintf(msg, "row=0x%04x ", row_val); /* 11 chars */ + msg += sprintf(msg, "bank=0x%x ", bank_val); /* 9 chars */ + msg += sprintf(msg, "col=0x%04x ", col_val); /* 11 chars */ + msg += sprintf(msg, "cs=%d", cs_val); /* 4 chars */ + + if (!(addr & SDRAM_ERR_ADDR_TYPE_MASK)) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + 1, /* error count */ + addr_val >> PAGE_SHIFT, + addr_val & ~PAGE_MASK, + syndrome_val, + cs_val, -1, -1, /* top, mid, low layer */ + mci->ctl_name, drvdata->msg); + } else { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + 1, /* error count */ + addr_val >> PAGE_SHIFT, + addr_val & ~PAGE_MASK, + syndrome_val, + cs_val, -1, -1, /* top, mid, low layer */ + mci->ctl_name, drvdata->msg); + } +} + +static void axp_mc_read_config(struct mem_ctl_info *mci) +{ + struct axp_mc_drvdata *drvdata = mci->pvt_info; + uint32_t config, addr_ctrl, rank_ctrl; + unsigned int i, cs_struct, cs_size; + struct dimm_info *dimm; + + config = readl(drvdata->base + SDRAM_CONFIG_REG); + if (config & SDRAM_CONFIG_BUS_WIDTH_MASK) + /* 64 bit */ + drvdata->width = 8; + else + /* 32 bit */ + drvdata->width = 4; + + addr_ctrl = readl(drvdata->base + SDRAM_ADDR_CTRL_REG); + rank_ctrl = readl(drvdata->base + SDRAM_RANK_CTRL_REG); + for (i = 0; i < SDRAM_NUM_CS; i++) { + dimm = mci->dimms[i]; + + if (!(rank_ctrl & SDRAM_RANK_CTRL_EXIST_MASK(i))) + continue; + + drvdata->cs_addr_sel[i] = + !!(addr_ctrl & SDRAM_ADDR_CTRL_ADDR_SEL_MASK(i)); + + cs_struct = (addr_ctrl & SDRAM_ADDR_CTRL_STRUCT_MASK(i)) >> SDRAM_ADDR_CTRL_STRUCT_OFFSET(i); + cs_size = ((addr_ctrl & SDRAM_ADDR_CTRL_SIZE_HIGH_MASK(i)) >> (SDRAM_ADDR_CTRL_SIZE_HIGH_OFFSET(i) - 2) | + ((addr_ctrl & SDRAM_ADDR_CTRL_SIZE_LOW_MASK(i)) >> SDRAM_ADDR_CTRL_SIZE_LOW_OFFSET(i))); + + switch (cs_size) { + case 0: /* 2GBit */ + dimm->nr_pages = 524288; + break; + case 1: /* 256MBit */ + dimm->nr_pages = 65536; + break; + case 2: /* 512MBit */ + dimm->nr_pages = 131072; + break; + case 3: /* 1GBit */ + dimm->nr_pages = 262144; + break; + case 4: /* 4GBit */ + dimm->nr_pages = 1048576; + break; + case 5: /* 8GBit */ + dimm->nr_pages = 2097152; + break; + } + dimm->grain = 8; + dimm->dtype = cs_struct ? DEV_X16 : DEV_X8; + dimm->mtype = (config & SDRAM_CONFIG_REGISTERED_MASK) ? + MEM_RDDR3 : MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + } +} + +static const struct of_device_id axp_mc_of_match[] = { + {.compatible = "marvell,armada-xp-sdram-controller",}, + {}, +}; +MODULE_DEVICE_TABLE(of, axp_mc_of_match); + +static int axp_mc_probe(struct platform_device *pdev) +{ + struct axp_mc_drvdata *drvdata; + struct edac_mc_layer layers[1]; + const struct of_device_id *id; + struct mem_ctl_info *mci; + void __iomem *base; + uint32_t config; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) { + dev_err(&pdev->dev, "Unable to map regs\n"); + return PTR_ERR(base); + } + + config = readl(base + SDRAM_CONFIG_REG); + if (!(config & SDRAM_CONFIG_ECC_MASK)) { + dev_warn(&pdev->dev, "SDRAM ECC is not enabled\n"); + return -EINVAL; + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = SDRAM_NUM_CS; + layers[0].is_virt_csrow = true; + + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*drvdata)); + if (!mci) + return -ENOMEM; + + drvdata = mci->pvt_info; + drvdata->base = base; + mci->pdev = &pdev->dev; + platform_set_drvdata(pdev, mci); + + id = of_match_device(axp_mc_of_match, &pdev->dev); + mci->edac_check = axp_mc_check; + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = pdev->dev.driver->name; + mci->ctl_name = id ? id->compatible : "unknown"; + mci->dev_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_NONE; + + axp_mc_read_config(mci); + + /* These SoCs have a reduced width bus */ + if (of_machine_is_compatible("marvell,armada380") || + of_machine_is_compatible("marvell,armadaxp-98dx3236")) + drvdata->width /= 2; + + /* configure SBE threshold */ + /* it seems that SBEs are not captured otherwise */ + writel(1 << SDRAM_ERR_CTRL_THR_OFFSET, drvdata->base + SDRAM_ERR_CTRL_REG); + + /* clear cause registers */ + writel(~(SDRAM_ERR_CAUSE_DBE_MASK | SDRAM_ERR_CAUSE_SBE_MASK), drvdata->base + SDRAM_ERR_CAUSE_ERR_REG); + writel(~(SDRAM_ERR_CAUSE_DBE_MASK | SDRAM_ERR_CAUSE_SBE_MASK), drvdata->base + SDRAM_ERR_CAUSE_MSG_REG); + + /* clear counter registers */ + writel(0, drvdata->base + SDRAM_ERR_SBE_COUNT_REG); + writel(0, drvdata->base + SDRAM_ERR_DBE_COUNT_REG); + + if (edac_mc_add_mc(mci)) { + edac_mc_free(mci); + return -EINVAL; + } + edac_op_state = EDAC_OPSTATE_POLL; + + return 0; +} + +static int axp_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver axp_mc_driver = { + .probe = axp_mc_probe, + .remove = axp_mc_remove, + .driver = { + .name = "armada_xp_mc_edac", + .of_match_table = of_match_ptr(axp_mc_of_match), + }, +}; + +/************************ EDAC Device (L2 Cache) ***************************/ + +struct aurora_l2_drvdata { + void __iomem *base; + + char msg[128]; + + /* error injection via debugfs */ + uint32_t inject_addr; + uint32_t inject_mask; + uint8_t inject_ctl; + + struct dentry *debugfs; +}; + +#ifdef CONFIG_EDAC_DEBUG +static void aurora_l2_inject(struct aurora_l2_drvdata *drvdata) +{ + drvdata->inject_addr &= AURORA_ERR_INJECT_CTL_ADDR_MASK; + drvdata->inject_ctl &= AURORA_ERR_INJECT_CTL_EN_MASK; + writel(0, drvdata->base + AURORA_ERR_INJECT_CTL_REG); + writel(drvdata->inject_mask, drvdata->base + AURORA_ERR_INJECT_MASK_REG); + writel(drvdata->inject_addr | drvdata->inject_ctl, drvdata->base + AURORA_ERR_INJECT_CTL_REG); +} +#endif + +static void aurora_l2_check(struct edac_device_ctl_info *dci) +{ + struct aurora_l2_drvdata *drvdata = dci->pvt_info; + uint32_t cnt, src, txn, err, attr_cap, addr_cap, way_cap; + unsigned int cnt_ce, cnt_ue; + char *msg = drvdata->msg; + size_t size = sizeof(drvdata->msg); + size_t len = 0; + + cnt = readl(drvdata->base + AURORA_ERR_CNT_REG); + attr_cap = readl(drvdata->base + AURORA_ERR_ATTR_CAP_REG); + addr_cap = readl(drvdata->base + AURORA_ERR_ADDR_CAP_REG); + way_cap = readl(drvdata->base + AURORA_ERR_WAY_CAP_REG); + + cnt_ce = (cnt & AURORA_ERR_CNT_CE_MASK) >> AURORA_ERR_CNT_CE_OFFSET; + cnt_ue = (cnt & AURORA_ERR_CNT_UE_MASK) >> AURORA_ERR_CNT_UE_OFFSET; + /* clear error counter registers */ + if (cnt_ce || cnt_ue) + writel(AURORA_ERR_CNT_CLR, drvdata->base + AURORA_ERR_CNT_REG); + + if (!(attr_cap & AURORA_ERR_ATTR_CAP_VALID)) + goto clear_remaining; + + src = (attr_cap & AURORA_ERR_ATTR_SRC_MSK) >> AURORA_ERR_ATTR_SRC_OFF; + if (src <= 3) + len += scnprintf(msg+len, size-len, "src=CPU%d ", src); + else + len += scnprintf(msg+len, size-len, "src=IO "); + + txn = (attr_cap & AURORA_ERR_ATTR_TXN_MSK) >> AURORA_ERR_ATTR_TXN_OFF; + switch (txn) { + case 0: + len += scnprintf(msg+len, size-len, "txn=Data-Read "); + break; + case 1: + len += scnprintf(msg+len, size-len, "txn=Isn-Read "); + break; + case 2: + len += scnprintf(msg+len, size-len, "txn=Clean-Flush "); + break; + case 3: + len += scnprintf(msg+len, size-len, "txn=Eviction "); + break; + case 4: + len += scnprintf(msg+len, size-len, + "txn=Read-Modify-Write "); + break; + } + + err = (attr_cap & AURORA_ERR_ATTR_ERR_MSK) >> AURORA_ERR_ATTR_ERR_OFF; + switch (err) { + case 0: + len += scnprintf(msg+len, size-len, "err=CorrECC "); + break; + case 1: + len += scnprintf(msg+len, size-len, "err=UnCorrECC "); + break; + case 2: + len += scnprintf(msg+len, size-len, "err=TagParity "); + break; + } + + len += scnprintf(msg+len, size-len, "addr=0x%x ", addr_cap & AURORA_ERR_ADDR_CAP_ADDR_MASK); + len += scnprintf(msg+len, size-len, "index=0x%x ", (way_cap & AURORA_ERR_WAY_IDX_MSK) >> AURORA_ERR_WAY_IDX_OFF); + len += scnprintf(msg+len, size-len, "way=0x%x", (way_cap & AURORA_ERR_WAY_CAP_WAY_MASK) >> AURORA_ERR_WAY_CAP_WAY_OFFSET); + + /* clear error capture registers */ + writel(AURORA_ERR_ATTR_CAP_VALID, drvdata->base + AURORA_ERR_ATTR_CAP_REG); + if (err) { + /* UnCorrECC or TagParity */ + if (cnt_ue) + cnt_ue--; + edac_device_handle_ue(dci, 0, 0, drvdata->msg); + } else { + if (cnt_ce) + cnt_ce--; + edac_device_handle_ce(dci, 0, 0, drvdata->msg); + } + +clear_remaining: + /* report remaining errors */ + while (cnt_ue--) + edac_device_handle_ue(dci, 0, 0, "details unavailable (multiple errors)"); + while (cnt_ce--) + edac_device_handle_ue(dci, 0, 0, "details unavailable (multiple errors)"); +} + +static void aurora_l2_poll(struct edac_device_ctl_info *dci) +{ +#ifdef CONFIG_EDAC_DEBUG + struct aurora_l2_drvdata *drvdata = dci->pvt_info; +#endif + + aurora_l2_check(dci); +#ifdef CONFIG_EDAC_DEBUG + aurora_l2_inject(drvdata); +#endif +} + +static const struct of_device_id aurora_l2_of_match[] = { + {.compatible = "marvell,aurora-system-cache",}, + {}, +}; +MODULE_DEVICE_TABLE(of, aurora_l2_of_match); + +static int aurora_l2_probe(struct platform_device *pdev) +{ + struct aurora_l2_drvdata *drvdata; + struct edac_device_ctl_info *dci; + const struct of_device_id *id; + uint32_t l2x0_aux_ctrl; + void __iomem *base; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) { + dev_err(&pdev->dev, "Unable to map regs\n"); + return PTR_ERR(base); + } + + l2x0_aux_ctrl = readl(base + L2X0_AUX_CTRL); + if (!(l2x0_aux_ctrl & AURORA_ACR_PARITY_EN)) + dev_warn(&pdev->dev, "tag parity is not enabled\n"); + if (!(l2x0_aux_ctrl & AURORA_ACR_ECC_EN)) + dev_warn(&pdev->dev, "data ECC is not enabled\n"); + + dci = edac_device_alloc_ctl_info(sizeof(*drvdata), + "cpu", 1, "L", 1, 2, NULL, 0, 0); + if (!dci) + return -ENOMEM; + + drvdata = dci->pvt_info; + drvdata->base = base; + dci->dev = &pdev->dev; + platform_set_drvdata(pdev, dci); + + id = of_match_device(aurora_l2_of_match, &pdev->dev); + dci->edac_check = aurora_l2_poll; + dci->mod_name = pdev->dev.driver->name; + dci->ctl_name = id ? id->compatible : "unknown"; + dci->dev_name = dev_name(&pdev->dev); + + /* clear registers */ + writel(AURORA_ERR_CNT_CLR, drvdata->base + AURORA_ERR_CNT_REG); + writel(AURORA_ERR_ATTR_CAP_VALID, drvdata->base + AURORA_ERR_ATTR_CAP_REG); + + if (edac_device_add_device(dci)) { + edac_device_free_ctl_info(dci); + return -EINVAL; + } + +#ifdef CONFIG_EDAC_DEBUG + drvdata->debugfs = edac_debugfs_create_dir(dev_name(&pdev->dev)); + if (drvdata->debugfs) { + edac_debugfs_create_x32("inject_addr", 0644, + drvdata->debugfs, + &drvdata->inject_addr); + edac_debugfs_create_x32("inject_mask", 0644, + drvdata->debugfs, + &drvdata->inject_mask); + edac_debugfs_create_x8("inject_ctl", 0644, + drvdata->debugfs, &drvdata->inject_ctl); + } +#endif + + return 0; +} + +static int aurora_l2_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); +#ifdef CONFIG_EDAC_DEBUG + struct aurora_l2_drvdata *drvdata = dci->pvt_info; + + edac_debugfs_remove_recursive(drvdata->debugfs); +#endif + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver aurora_l2_driver = { + .probe = aurora_l2_probe, + .remove = aurora_l2_remove, + .driver = { + .name = "aurora_l2_edac", + .of_match_table = of_match_ptr(aurora_l2_of_match), + }, +}; + +/************************ Driver registration ******************************/ + +static struct platform_driver * const drivers[] = { + &axp_mc_driver, + &aurora_l2_driver, +}; + +static int __init armada_xp_edac_init(void) +{ + int res; + + /* only polling is supported */ + edac_op_state = EDAC_OPSTATE_POLL; + + res = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); + if (res) + pr_warn("Armada XP EDAC drivers fail to register\n"); + + return 0; +} +module_init(armada_xp_edac_init); + +static void __exit armada_xp_edac_exit(void) +{ + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); +} +module_exit(armada_xp_edac_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Pengutronix"); +MODULE_DESCRIPTION("EDAC Drivers for Marvell Armada XP SDRAM and L2 Cache Controller"); diff --git a/drivers/edac/aspeed_edac.c b/drivers/edac/aspeed_edac.c new file mode 100644 index 000000000..6bd5f8815 --- /dev/null +++ b/drivers/edac/aspeed_edac.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018, 2019 Cisco Systems + */ + +#include <linux/edac.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/stop_machine.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/regmap.h> +#include "edac_module.h" + + +#define DRV_NAME "aspeed-edac" + + +#define ASPEED_MCR_PROT 0x00 /* protection key register */ +#define ASPEED_MCR_CONF 0x04 /* configuration register */ +#define ASPEED_MCR_INTR_CTRL 0x50 /* interrupt control/status register */ +#define ASPEED_MCR_ADDR_UNREC 0x58 /* address of first un-recoverable error */ +#define ASPEED_MCR_ADDR_REC 0x5c /* address of last recoverable error */ +#define ASPEED_MCR_LAST ASPEED_MCR_ADDR_REC + + +#define ASPEED_MCR_PROT_PASSWD 0xfc600309 +#define ASPEED_MCR_CONF_DRAM_TYPE BIT(4) +#define ASPEED_MCR_CONF_ECC BIT(7) +#define ASPEED_MCR_INTR_CTRL_CLEAR BIT(31) +#define ASPEED_MCR_INTR_CTRL_CNT_REC GENMASK(23, 16) +#define ASPEED_MCR_INTR_CTRL_CNT_UNREC GENMASK(15, 12) +#define ASPEED_MCR_INTR_CTRL_ENABLE (BIT(0) | BIT(1)) + + +static struct regmap *aspeed_regmap; + + +static int regmap_reg_write(void *context, unsigned int reg, unsigned int val) +{ + void __iomem *regs = (void __iomem *)context; + + /* enable write to MCR register set */ + writel(ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT); + + writel(val, regs + reg); + + /* disable write to MCR register set */ + writel(~ASPEED_MCR_PROT_PASSWD, regs + ASPEED_MCR_PROT); + + return 0; +} + + +static int regmap_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + void __iomem *regs = (void __iomem *)context; + + *val = readl(regs + reg); + + return 0; +} + +static bool regmap_is_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case ASPEED_MCR_PROT: + case ASPEED_MCR_INTR_CTRL: + case ASPEED_MCR_ADDR_UNREC: + case ASPEED_MCR_ADDR_REC: + return true; + default: + return false; + } +} + + +static const struct regmap_config aspeed_regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = ASPEED_MCR_LAST, + .reg_write = regmap_reg_write, + .reg_read = regmap_reg_read, + .volatile_reg = regmap_is_volatile, + .fast_io = true, +}; + + +static void count_rec(struct mem_ctl_info *mci, u8 rec_cnt, u32 rec_addr) +{ + struct csrow_info *csrow = mci->csrows[0]; + u32 page, offset, syndrome; + + if (!rec_cnt) + return; + + /* report first few errors (if there are) */ + /* note: no addresses are recorded */ + if (rec_cnt > 1) { + /* page, offset and syndrome are not available */ + page = 0; + offset = 0; + syndrome = 0; + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, rec_cnt-1, + page, offset, syndrome, 0, 0, -1, + "address(es) not available", ""); + } + + /* report last error */ + /* note: rec_addr is the last recoverable error addr */ + page = rec_addr >> PAGE_SHIFT; + offset = rec_addr & ~PAGE_MASK; + /* syndrome is not available */ + syndrome = 0; + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + csrow->first_page + page, offset, syndrome, + 0, 0, -1, "", ""); +} + + +static void count_un_rec(struct mem_ctl_info *mci, u8 un_rec_cnt, + u32 un_rec_addr) +{ + struct csrow_info *csrow = mci->csrows[0]; + u32 page, offset, syndrome; + + if (!un_rec_cnt) + return; + + /* report 1. error */ + /* note: un_rec_addr is the first unrecoverable error addr */ + page = un_rec_addr >> PAGE_SHIFT; + offset = un_rec_addr & ~PAGE_MASK; + /* syndrome is not available */ + syndrome = 0; + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + csrow->first_page + page, offset, syndrome, + 0, 0, -1, "", ""); + + /* report further errors (if there are) */ + /* note: no addresses are recorded */ + if (un_rec_cnt > 1) { + /* page, offset and syndrome are not available */ + page = 0; + offset = 0; + syndrome = 0; + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, un_rec_cnt-1, + page, offset, syndrome, 0, 0, -1, + "address(es) not available", ""); + } +} + + +static irqreturn_t mcr_isr(int irq, void *arg) +{ + struct mem_ctl_info *mci = arg; + u32 rec_addr, un_rec_addr; + u32 reg50, reg5c, reg58; + u8 rec_cnt, un_rec_cnt; + + regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, ®50); + dev_dbg(mci->pdev, "received edac interrupt w/ mcr register 50: 0x%x\n", + reg50); + + /* collect data about recoverable and unrecoverable errors */ + rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_REC) >> 16; + un_rec_cnt = (reg50 & ASPEED_MCR_INTR_CTRL_CNT_UNREC) >> 12; + + dev_dbg(mci->pdev, "%d recoverable interrupts and %d unrecoverable interrupts\n", + rec_cnt, un_rec_cnt); + + regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_UNREC, ®58); + un_rec_addr = reg58; + + regmap_read(aspeed_regmap, ASPEED_MCR_ADDR_REC, ®5c); + rec_addr = reg5c; + + /* clear interrupt flags and error counters: */ + regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL, + ASPEED_MCR_INTR_CTRL_CLEAR, + ASPEED_MCR_INTR_CTRL_CLEAR); + + regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL, + ASPEED_MCR_INTR_CTRL_CLEAR, 0); + + /* process recoverable and unrecoverable errors */ + count_rec(mci, rec_cnt, rec_addr); + count_un_rec(mci, un_rec_cnt, un_rec_addr); + + if (!rec_cnt && !un_rec_cnt) + dev_dbg(mci->pdev, "received edac interrupt, but did not find any ECC counters\n"); + + regmap_read(aspeed_regmap, ASPEED_MCR_INTR_CTRL, ®50); + dev_dbg(mci->pdev, "edac interrupt handled. mcr reg 50 is now: 0x%x\n", + reg50); + + return IRQ_HANDLED; +} + + +static int config_irq(void *ctx, struct platform_device *pdev) +{ + int irq; + int rc; + + /* register interrupt handler */ + irq = platform_get_irq(pdev, 0); + dev_dbg(&pdev->dev, "got irq %d\n", irq); + if (irq < 0) + return irq; + + rc = devm_request_irq(&pdev->dev, irq, mcr_isr, IRQF_TRIGGER_HIGH, + DRV_NAME, ctx); + if (rc) { + dev_err(&pdev->dev, "unable to request irq %d\n", irq); + return rc; + } + + /* enable interrupts */ + regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL, + ASPEED_MCR_INTR_CTRL_ENABLE, + ASPEED_MCR_INTR_CTRL_ENABLE); + + return 0; +} + + +static int init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow = mci->csrows[0]; + u32 nr_pages, dram_type; + struct dimm_info *dimm; + struct device_node *np; + struct resource r; + u32 reg04; + int rc; + + /* retrieve info about physical memory from device tree */ + np = of_find_node_by_name(NULL, "memory"); + if (!np) { + dev_err(mci->pdev, "dt: missing /memory node\n"); + return -ENODEV; + } + + rc = of_address_to_resource(np, 0, &r); + + of_node_put(np); + + if (rc) { + dev_err(mci->pdev, "dt: failed requesting resource for /memory node\n"); + return rc; + } + + dev_dbg(mci->pdev, "dt: /memory node resources: first page %pR, PAGE_SHIFT macro=0x%x\n", + &r, PAGE_SHIFT); + + csrow->first_page = r.start >> PAGE_SHIFT; + nr_pages = resource_size(&r) >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + nr_pages - 1; + + regmap_read(aspeed_regmap, ASPEED_MCR_CONF, ®04); + dram_type = (reg04 & ASPEED_MCR_CONF_DRAM_TYPE) ? MEM_DDR4 : MEM_DDR3; + + dimm = csrow->channels[0]->dimm; + dimm->mtype = dram_type; + dimm->edac_mode = EDAC_SECDED; + dimm->nr_pages = nr_pages / csrow->nr_channels; + + dev_dbg(mci->pdev, "initialized dimm with first_page=0x%lx and nr_pages=0x%x\n", + csrow->first_page, nr_pages); + + return 0; +} + + +static int aspeed_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + void __iomem *regs; + u32 reg04; + int rc; + + regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + aspeed_regmap = devm_regmap_init(dev, NULL, (__force void *)regs, + &aspeed_regmap_config); + if (IS_ERR(aspeed_regmap)) + return PTR_ERR(aspeed_regmap); + + /* bail out if ECC mode is not configured */ + regmap_read(aspeed_regmap, ASPEED_MCR_CONF, ®04); + if (!(reg04 & ASPEED_MCR_CONF_ECC)) { + dev_err(&pdev->dev, "ECC mode is not configured in u-boot\n"); + return -EPERM; + } + + edac_op_state = EDAC_OPSTATE_INT; + + /* allocate & init EDAC MC data structure */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + mci->scrub_mode = SCRUB_HW_SRC; + mci->mod_name = DRV_NAME; + mci->ctl_name = "MIC"; + mci->dev_name = dev_name(&pdev->dev); + + rc = init_csrows(mci); + if (rc) { + dev_err(&pdev->dev, "failed to init csrows\n"); + goto probe_exit02; + } + + platform_set_drvdata(pdev, mci); + + /* register with edac core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + goto probe_exit02; + } + + /* register interrupt handler and enable interrupts */ + rc = config_irq(mci, pdev); + if (rc) { + dev_err(&pdev->dev, "failed setting up irq\n"); + goto probe_exit01; + } + + return 0; + +probe_exit01: + edac_mc_del_mc(&pdev->dev); +probe_exit02: + edac_mc_free(mci); + return rc; +} + + +static int aspeed_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci; + + /* disable interrupts */ + regmap_update_bits(aspeed_regmap, ASPEED_MCR_INTR_CTRL, + ASPEED_MCR_INTR_CTRL_ENABLE, 0); + + /* free resources */ + mci = edac_mc_del_mc(&pdev->dev); + if (mci) + edac_mc_free(mci); + + return 0; +} + + +static const struct of_device_id aspeed_of_match[] = { + { .compatible = "aspeed,ast2400-sdram-edac" }, + { .compatible = "aspeed,ast2500-sdram-edac" }, + { .compatible = "aspeed,ast2600-sdram-edac" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, aspeed_of_match); + +static struct platform_driver aspeed_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = aspeed_of_match + }, + .probe = aspeed_probe, + .remove = aspeed_remove +}; +module_platform_driver(aspeed_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Stefan Schaeckeler <sschaeck@cisco.com>"); +MODULE_DESCRIPTION("Aspeed BMC SoC EDAC driver"); +MODULE_VERSION("1.0"); diff --git a/drivers/edac/bluefield_edac.c b/drivers/edac/bluefield_edac.c new file mode 100644 index 000000000..e4736eb37 --- /dev/null +++ b/drivers/edac/bluefield_edac.c @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Bluefield-specific EDAC driver. + * + * Copyright (c) 2019 Mellanox Technologies. + */ + +#include <linux/acpi.h> +#include <linux/arm-smccc.h> +#include <linux/bitfield.h> +#include <linux/edac.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include "edac_module.h" + +#define DRIVER_NAME "bluefield-edac" + +/* + * Mellanox BlueField EMI (External Memory Interface) register definitions. + */ + +#define MLXBF_ECC_CNT 0x340 +#define MLXBF_ECC_CNT__SERR_CNT GENMASK(15, 0) +#define MLXBF_ECC_CNT__DERR_CNT GENMASK(31, 16) + +#define MLXBF_ECC_ERR 0x348 +#define MLXBF_ECC_ERR__SECC BIT(0) +#define MLXBF_ECC_ERR__DECC BIT(16) + +#define MLXBF_ECC_LATCH_SEL 0x354 +#define MLXBF_ECC_LATCH_SEL__START BIT(24) + +#define MLXBF_ERR_ADDR_0 0x358 + +#define MLXBF_ERR_ADDR_1 0x37c + +#define MLXBF_SYNDROM 0x35c +#define MLXBF_SYNDROM__DERR BIT(0) +#define MLXBF_SYNDROM__SERR BIT(1) +#define MLXBF_SYNDROM__SYN GENMASK(25, 16) + +#define MLXBF_ADD_INFO 0x364 +#define MLXBF_ADD_INFO__ERR_PRANK GENMASK(9, 8) + +#define MLXBF_EDAC_MAX_DIMM_PER_MC 2 +#define MLXBF_EDAC_ERROR_GRAIN 8 + +/* + * Request MLNX_SIP_GET_DIMM_INFO + * + * Retrieve information about DIMM on a certain slot. + * + * Call register usage: + * a0: MLNX_SIP_GET_DIMM_INFO + * a1: (Memory controller index) << 16 | (Dimm index in memory controller) + * a2-7: not used. + * + * Return status: + * a0: MLXBF_DIMM_INFO defined below describing the DIMM. + * a1-3: not used. + */ +#define MLNX_SIP_GET_DIMM_INFO 0x82000008 + +/* Format for the SMC response about the memory information */ +#define MLXBF_DIMM_INFO__SIZE_GB GENMASK_ULL(15, 0) +#define MLXBF_DIMM_INFO__IS_RDIMM BIT(16) +#define MLXBF_DIMM_INFO__IS_LRDIMM BIT(17) +#define MLXBF_DIMM_INFO__IS_NVDIMM BIT(18) +#define MLXBF_DIMM_INFO__RANKS GENMASK_ULL(23, 21) +#define MLXBF_DIMM_INFO__PACKAGE_X GENMASK_ULL(31, 24) + +struct bluefield_edac_priv { + int dimm_ranks[MLXBF_EDAC_MAX_DIMM_PER_MC]; + void __iomem *emi_base; + int dimm_per_mc; +}; + +static u64 smc_call1(u64 smc_op, u64 smc_arg) +{ + struct arm_smccc_res res; + + arm_smccc_smc(smc_op, smc_arg, 0, 0, 0, 0, 0, 0, &res); + + return res.a0; +} + +/* + * Gather the ECC information from the External Memory Interface registers + * and report it to the edac handler. + */ +static void bluefield_gather_report_ecc(struct mem_ctl_info *mci, + int error_cnt, + int is_single_ecc) +{ + struct bluefield_edac_priv *priv = mci->pvt_info; + u32 dram_additional_info, err_prank, edea0, edea1; + u32 ecc_latch_select, dram_syndrom, serr, derr, syndrom; + enum hw_event_mc_err_type ecc_type; + u64 ecc_dimm_addr; + int ecc_dimm; + + ecc_type = is_single_ecc ? HW_EVENT_ERR_CORRECTED : + HW_EVENT_ERR_UNCORRECTED; + + /* + * Tell the External Memory Interface to populate the relevant + * registers with information about the last ECC error occurrence. + */ + ecc_latch_select = MLXBF_ECC_LATCH_SEL__START; + writel(ecc_latch_select, priv->emi_base + MLXBF_ECC_LATCH_SEL); + + /* + * Verify that the ECC reported info in the registers is of the + * same type as the one asked to report. If not, just report the + * error without the detailed information. + */ + dram_syndrom = readl(priv->emi_base + MLXBF_SYNDROM); + serr = FIELD_GET(MLXBF_SYNDROM__SERR, dram_syndrom); + derr = FIELD_GET(MLXBF_SYNDROM__DERR, dram_syndrom); + syndrom = FIELD_GET(MLXBF_SYNDROM__SYN, dram_syndrom); + + if ((is_single_ecc && !serr) || (!is_single_ecc && !derr)) { + edac_mc_handle_error(ecc_type, mci, error_cnt, 0, 0, 0, + 0, 0, -1, mci->ctl_name, ""); + return; + } + + dram_additional_info = readl(priv->emi_base + MLXBF_ADD_INFO); + err_prank = FIELD_GET(MLXBF_ADD_INFO__ERR_PRANK, dram_additional_info); + + ecc_dimm = (err_prank >= 2 && priv->dimm_ranks[0] <= 2) ? 1 : 0; + + edea0 = readl(priv->emi_base + MLXBF_ERR_ADDR_0); + edea1 = readl(priv->emi_base + MLXBF_ERR_ADDR_1); + + ecc_dimm_addr = ((u64)edea1 << 32) | edea0; + + edac_mc_handle_error(ecc_type, mci, error_cnt, + PFN_DOWN(ecc_dimm_addr), + offset_in_page(ecc_dimm_addr), + syndrom, ecc_dimm, 0, 0, mci->ctl_name, ""); +} + +static void bluefield_edac_check(struct mem_ctl_info *mci) +{ + struct bluefield_edac_priv *priv = mci->pvt_info; + u32 ecc_count, single_error_count, double_error_count, ecc_error = 0; + + /* + * The memory controller might not be initialized by the firmware + * when there isn't memory, which may lead to bad register readings. + */ + if (mci->edac_cap == EDAC_FLAG_NONE) + return; + + ecc_count = readl(priv->emi_base + MLXBF_ECC_CNT); + single_error_count = FIELD_GET(MLXBF_ECC_CNT__SERR_CNT, ecc_count); + double_error_count = FIELD_GET(MLXBF_ECC_CNT__DERR_CNT, ecc_count); + + if (single_error_count) { + ecc_error |= MLXBF_ECC_ERR__SECC; + + bluefield_gather_report_ecc(mci, single_error_count, 1); + } + + if (double_error_count) { + ecc_error |= MLXBF_ECC_ERR__DECC; + + bluefield_gather_report_ecc(mci, double_error_count, 0); + } + + /* Write to clear reported errors. */ + if (ecc_count) + writel(ecc_error, priv->emi_base + MLXBF_ECC_ERR); +} + +/* Initialize the DIMMs information for the given memory controller. */ +static void bluefield_edac_init_dimms(struct mem_ctl_info *mci) +{ + struct bluefield_edac_priv *priv = mci->pvt_info; + int mem_ctrl_idx = mci->mc_idx; + struct dimm_info *dimm; + u64 smc_info, smc_arg; + int is_empty = 1, i; + + for (i = 0; i < priv->dimm_per_mc; i++) { + dimm = mci->dimms[i]; + + smc_arg = mem_ctrl_idx << 16 | i; + smc_info = smc_call1(MLNX_SIP_GET_DIMM_INFO, smc_arg); + + if (!FIELD_GET(MLXBF_DIMM_INFO__SIZE_GB, smc_info)) { + dimm->mtype = MEM_EMPTY; + continue; + } + + is_empty = 0; + + dimm->edac_mode = EDAC_SECDED; + + if (FIELD_GET(MLXBF_DIMM_INFO__IS_NVDIMM, smc_info)) + dimm->mtype = MEM_NVDIMM; + else if (FIELD_GET(MLXBF_DIMM_INFO__IS_LRDIMM, smc_info)) + dimm->mtype = MEM_LRDDR4; + else if (FIELD_GET(MLXBF_DIMM_INFO__IS_RDIMM, smc_info)) + dimm->mtype = MEM_RDDR4; + else + dimm->mtype = MEM_DDR4; + + dimm->nr_pages = + FIELD_GET(MLXBF_DIMM_INFO__SIZE_GB, smc_info) * + (SZ_1G / PAGE_SIZE); + dimm->grain = MLXBF_EDAC_ERROR_GRAIN; + + /* Mem controller for BlueField only supports x4, x8 and x16 */ + switch (FIELD_GET(MLXBF_DIMM_INFO__PACKAGE_X, smc_info)) { + case 4: + dimm->dtype = DEV_X4; + break; + case 8: + dimm->dtype = DEV_X8; + break; + case 16: + dimm->dtype = DEV_X16; + break; + default: + dimm->dtype = DEV_UNKNOWN; + } + + priv->dimm_ranks[i] = + FIELD_GET(MLXBF_DIMM_INFO__RANKS, smc_info); + } + + if (is_empty) + mci->edac_cap = EDAC_FLAG_NONE; + else + mci->edac_cap = EDAC_FLAG_SECDED; +} + +static int bluefield_edac_mc_probe(struct platform_device *pdev) +{ + struct bluefield_edac_priv *priv; + struct device *dev = &pdev->dev; + struct edac_mc_layer layers[1]; + struct mem_ctl_info *mci; + struct resource *emi_res; + unsigned int mc_idx, dimm_count; + int rc, ret; + + /* Read the MSS (Memory SubSystem) index from ACPI table. */ + if (device_property_read_u32(dev, "mss_number", &mc_idx)) { + dev_warn(dev, "bf_edac: MSS number unknown\n"); + return -EINVAL; + } + + /* Read the DIMMs per MC from ACPI table. */ + if (device_property_read_u32(dev, "dimm_per_mc", &dimm_count)) { + dev_warn(dev, "bf_edac: DIMMs per MC unknown\n"); + return -EINVAL; + } + + if (dimm_count > MLXBF_EDAC_MAX_DIMM_PER_MC) { + dev_warn(dev, "bf_edac: DIMMs per MC not valid\n"); + return -EINVAL; + } + + emi_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!emi_res) + return -EINVAL; + + layers[0].type = EDAC_MC_LAYER_SLOT; + layers[0].size = dimm_count; + layers[0].is_virt_csrow = true; + + mci = edac_mc_alloc(mc_idx, ARRAY_SIZE(layers), layers, sizeof(*priv)); + if (!mci) + return -ENOMEM; + + priv = mci->pvt_info; + + priv->dimm_per_mc = dimm_count; + priv->emi_base = devm_ioremap_resource(dev, emi_res); + if (IS_ERR(priv->emi_base)) { + dev_err(dev, "failed to map EMI IO resource\n"); + ret = PTR_ERR(priv->emi_base); + goto err; + } + + mci->pdev = dev; + mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_RDDR4 | + MEM_FLAG_LRDDR4 | MEM_FLAG_NVDIMM; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + + mci->mod_name = DRIVER_NAME; + mci->ctl_name = "BlueField_Memory_Controller"; + mci->dev_name = dev_name(dev); + mci->edac_check = bluefield_edac_check; + + /* Initialize mci with the actual populated DIMM information. */ + bluefield_edac_init_dimms(mci); + + platform_set_drvdata(pdev, mci); + + /* Register with EDAC core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(dev, "failed to register with EDAC core\n"); + ret = rc; + goto err; + } + + /* Only POLL mode supported so far. */ + edac_op_state = EDAC_OPSTATE_POLL; + + return 0; + +err: + edac_mc_free(mci); + + return ret; + +} + +static int bluefield_edac_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static const struct acpi_device_id bluefield_mc_acpi_ids[] = { + {"MLNXBF08", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, bluefield_mc_acpi_ids); + +static struct platform_driver bluefield_edac_mc_driver = { + .driver = { + .name = DRIVER_NAME, + .acpi_match_table = bluefield_mc_acpi_ids, + }, + .probe = bluefield_edac_mc_probe, + .remove = bluefield_edac_mc_remove, +}; + +module_platform_driver(bluefield_edac_mc_driver); + +MODULE_DESCRIPTION("Mellanox BlueField memory edac driver"); +MODULE_AUTHOR("Mellanox Technologies"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c new file mode 100644 index 000000000..bc1f34164 --- /dev/null +++ b/drivers/edac/cell_edac.c @@ -0,0 +1,282 @@ +/* + * Cell MIC driver for ECC counting + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp. + * <benh@kernel.crashing.org> + * + * This file may be distributed under the terms of the + * GNU General Public License. + */ +#undef DEBUG + +#include <linux/edac.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/stop_machine.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <asm/machdep.h> +#include <asm/cell-regs.h> + +#include "edac_module.h" + +struct cell_edac_priv +{ + struct cbe_mic_tm_regs __iomem *regs; + int node; + int chanmask; +#ifdef DEBUG + u64 prev_fir; +#endif +}; + +static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) +{ + struct cell_edac_priv *priv = mci->pvt_info; + struct csrow_info *csrow = mci->csrows[0]; + unsigned long address, pfn, offset, syndrome; + + dev_dbg(mci->pdev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", + priv->node, chan, ar); + + /* Address decoding is likely a bit bogus, to dbl check */ + address = (ar & 0xffffffffe0000000ul) >> 29; + if (priv->chanmask == 0x3) + address = (address << 1) | chan; + pfn = address >> PAGE_SHIFT; + offset = address & ~PAGE_MASK; + syndrome = (ar & 0x000000001fe00000ul) >> 21; + + /* TODO: Decoding of the error address */ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + csrow->first_page + pfn, offset, syndrome, + 0, chan, -1, "", ""); +} + +static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) +{ + struct cell_edac_priv *priv = mci->pvt_info; + struct csrow_info *csrow = mci->csrows[0]; + unsigned long address, pfn, offset; + + dev_dbg(mci->pdev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", + priv->node, chan, ar); + + /* Address decoding is likely a bit bogus, to dbl check */ + address = (ar & 0xffffffffe0000000ul) >> 29; + if (priv->chanmask == 0x3) + address = (address << 1) | chan; + pfn = address >> PAGE_SHIFT; + offset = address & ~PAGE_MASK; + + /* TODO: Decoding of the error address */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + csrow->first_page + pfn, offset, 0, + 0, chan, -1, "", ""); +} + +static void cell_edac_check(struct mem_ctl_info *mci) +{ + struct cell_edac_priv *priv = mci->pvt_info; + u64 fir, addreg, clear = 0; + + fir = in_be64(&priv->regs->mic_fir); +#ifdef DEBUG + if (fir != priv->prev_fir) { + dev_dbg(mci->pdev, "fir change : 0x%016lx\n", fir); + priv->prev_fir = fir; + } +#endif + if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_SINGLE_0_ERR)) { + addreg = in_be64(&priv->regs->mic_df_ecc_address_0); + clear |= CBE_MIC_FIR_ECC_SINGLE_0_RESET; + cell_edac_count_ce(mci, 0, addreg); + } + if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_SINGLE_1_ERR)) { + addreg = in_be64(&priv->regs->mic_df_ecc_address_1); + clear |= CBE_MIC_FIR_ECC_SINGLE_1_RESET; + cell_edac_count_ce(mci, 1, addreg); + } + if ((priv->chanmask & 0x1) && (fir & CBE_MIC_FIR_ECC_MULTI_0_ERR)) { + addreg = in_be64(&priv->regs->mic_df_ecc_address_0); + clear |= CBE_MIC_FIR_ECC_MULTI_0_RESET; + cell_edac_count_ue(mci, 0, addreg); + } + if ((priv->chanmask & 0x2) && (fir & CBE_MIC_FIR_ECC_MULTI_1_ERR)) { + addreg = in_be64(&priv->regs->mic_df_ecc_address_1); + clear |= CBE_MIC_FIR_ECC_MULTI_1_RESET; + cell_edac_count_ue(mci, 1, addreg); + } + + /* The procedure for clearing FIR bits is a bit ... weird */ + if (clear) { + fir &= ~(CBE_MIC_FIR_ECC_ERR_MASK | CBE_MIC_FIR_ECC_SET_MASK); + fir |= CBE_MIC_FIR_ECC_RESET_MASK; + fir &= ~clear; + out_be64(&priv->regs->mic_fir, fir); + (void)in_be64(&priv->regs->mic_fir); + + mb(); /* sync up */ +#ifdef DEBUG + fir = in_be64(&priv->regs->mic_fir); + dev_dbg(mci->pdev, "fir clear : 0x%016lx\n", fir); +#endif + } +} + +static void cell_edac_init_csrows(struct mem_ctl_info *mci) +{ + struct csrow_info *csrow = mci->csrows[0]; + struct dimm_info *dimm; + struct cell_edac_priv *priv = mci->pvt_info; + struct device_node *np; + int j; + u32 nr_pages; + + for_each_node_by_name(np, "memory") { + struct resource r; + + /* We "know" that the Cell firmware only creates one entry + * in the "memory" nodes. If that changes, this code will + * need to be adapted. + */ + if (of_address_to_resource(np, 0, &r)) + continue; + if (of_node_to_nid(np) != priv->node) + continue; + csrow->first_page = r.start >> PAGE_SHIFT; + nr_pages = resource_size(&r) >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + nr_pages - 1; + + for (j = 0; j < csrow->nr_channels; j++) { + dimm = csrow->channels[j]->dimm; + dimm->mtype = MEM_XDR; + dimm->edac_mode = EDAC_SECDED; + dimm->nr_pages = nr_pages / csrow->nr_channels; + } + dev_dbg(mci->pdev, + "Initialized on node %d, chanmask=0x%x," + " first_page=0x%lx, nr_pages=0x%x\n", + priv->node, priv->chanmask, + csrow->first_page, nr_pages); + break; + } + of_node_put(np); +} + +static int cell_edac_probe(struct platform_device *pdev) +{ + struct cbe_mic_tm_regs __iomem *regs; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct cell_edac_priv *priv; + u64 reg; + int rc, chanmask, num_chans; + + regs = cbe_get_cpu_mic_tm_regs(cbe_node_to_cpu(pdev->id)); + if (regs == NULL) + return -ENODEV; + + edac_op_state = EDAC_OPSTATE_POLL; + + /* Get channel population */ + reg = in_be64(®s->mic_mnt_cfg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); + chanmask = 0; + if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) + chanmask |= 0x1; + if (reg & CBE_MIC_MNT_CFG_CHAN_1_POP) + chanmask |= 0x2; + if (chanmask == 0) { + dev_warn(&pdev->dev, + "Yuck ! No channel populated ? Aborting !\n"); + return -ENODEV; + } + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", + in_be64(®s->mic_fir)); + + /* Allocate & init EDAC MC data structure */ + num_chans = chanmask == 3 ? 2 : 1; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = num_chans; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(pdev->id, ARRAY_SIZE(layers), layers, + sizeof(struct cell_edac_priv)); + if (mci == NULL) + return -ENOMEM; + priv = mci->pvt_info; + priv->regs = regs; + priv->node = pdev->id; + priv->chanmask = chanmask; + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_XDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_EC | EDAC_FLAG_SECDED; + mci->mod_name = "cell_edac"; + mci->ctl_name = "MIC"; + mci->dev_name = dev_name(&pdev->dev); + mci->edac_check = cell_edac_check; + cell_edac_init_csrows(mci); + + /* Register with EDAC core */ + rc = edac_mc_add_mc(mci); + if (rc) { + dev_err(&pdev->dev, "failed to register with EDAC core\n"); + edac_mc_free(mci); + return rc; + } + + return 0; +} + +static int cell_edac_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev); + if (mci) + edac_mc_free(mci); + return 0; +} + +static struct platform_driver cell_edac_driver = { + .driver = { + .name = "cbe-mic", + }, + .probe = cell_edac_probe, + .remove = cell_edac_remove, +}; + +static int __init cell_edac_init(void) +{ + /* Sanity check registers data structure */ + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_df_ecc_address_0) != 0xf8); + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_df_ecc_address_1) != 0x1b8); + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_df_config) != 0x218); + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_fir) != 0x230); + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_mnt_cfg) != 0x210); + BUILD_BUG_ON(offsetof(struct cbe_mic_tm_regs, + mic_exc) != 0x208); + + return platform_driver_register(&cell_edac_driver); +} + +static void __exit cell_edac_exit(void) +{ + platform_driver_unregister(&cell_edac_driver); +} + +module_init(cell_edac_init); +module_exit(cell_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("ECC counting for Cell MIC"); diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c new file mode 100644 index 000000000..9797e6d60 --- /dev/null +++ b/drivers/edac/cpc925_edac.c @@ -0,0 +1,1067 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cpc925_edac.c, EDAC driver for IBM CPC925 Bridge and Memory Controller. + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao <qingtao.cao@windriver.com> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/edac.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/gfp.h> + +#include "edac_module.h" + +#define CPC925_EDAC_REVISION " Ver: 1.0.0" +#define CPC925_EDAC_MOD_STR "cpc925_edac" + +#define cpc925_printk(level, fmt, arg...) \ + edac_printk(level, "CPC925", fmt, ##arg) + +#define cpc925_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "CPC925", fmt, ##arg) + +/* + * CPC925 registers are of 32 bits with bit0 defined at the + * most significant bit and bit31 at that of least significant. + */ +#define CPC925_BITS_PER_REG 32 +#define CPC925_BIT(nr) (1UL << (CPC925_BITS_PER_REG - 1 - nr)) + +/* + * EDAC device names for the error detections of + * CPU Interface and Hypertransport Link. + */ +#define CPC925_CPU_ERR_DEV "cpu" +#define CPC925_HT_LINK_DEV "htlink" + +/* Suppose DDR Refresh cycle is 15.6 microsecond */ +#define CPC925_REF_FREQ 0xFA69 +#define CPC925_SCRUB_BLOCK_SIZE 64 /* bytes */ +#define CPC925_NR_CSROWS 8 + +/* + * All registers and bits definitions are taken from + * "CPC925 Bridge and Memory Controller User Manual, SA14-2761-02". + */ + +/* + * CPU and Memory Controller Registers + */ +/************************************************************ + * Processor Interface Exception Mask Register (APIMASK) + ************************************************************/ +#define REG_APIMASK_OFFSET 0x30070 +enum apimask_bits { + APIMASK_DART = CPC925_BIT(0), /* DART Exception */ + APIMASK_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ + APIMASK_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ + APIMASK_STAT = CPC925_BIT(3), /* Status Exception */ + APIMASK_DERR = CPC925_BIT(4), /* Data Error Exception */ + APIMASK_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ + APIMASK_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ + /* BIT(7) Reserved */ + APIMASK_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ + APIMASK_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ + APIMASK_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ + APIMASK_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ + + CPU_MASK_ENABLE = (APIMASK_DART | APIMASK_ADI0 | APIMASK_ADI1 | + APIMASK_STAT | APIMASK_DERR | APIMASK_ADRS0 | + APIMASK_ADRS1), + ECC_MASK_ENABLE = (APIMASK_ECC_UE_H | APIMASK_ECC_CE_H | + APIMASK_ECC_UE_L | APIMASK_ECC_CE_L), +}; +#define APIMASK_ADI(n) CPC925_BIT(((n)+1)) + +/************************************************************ + * Processor Interface Exception Register (APIEXCP) + ************************************************************/ +#define REG_APIEXCP_OFFSET 0x30060 +enum apiexcp_bits { + APIEXCP_DART = CPC925_BIT(0), /* DART Exception */ + APIEXCP_ADI0 = CPC925_BIT(1), /* Handshake Error on PI0_ADI */ + APIEXCP_ADI1 = CPC925_BIT(2), /* Handshake Error on PI1_ADI */ + APIEXCP_STAT = CPC925_BIT(3), /* Status Exception */ + APIEXCP_DERR = CPC925_BIT(4), /* Data Error Exception */ + APIEXCP_ADRS0 = CPC925_BIT(5), /* Addressing Exception on PI0 */ + APIEXCP_ADRS1 = CPC925_BIT(6), /* Addressing Exception on PI1 */ + /* BIT(7) Reserved */ + APIEXCP_ECC_UE_H = CPC925_BIT(8), /* UECC upper */ + APIEXCP_ECC_CE_H = CPC925_BIT(9), /* CECC upper */ + APIEXCP_ECC_UE_L = CPC925_BIT(10), /* UECC lower */ + APIEXCP_ECC_CE_L = CPC925_BIT(11), /* CECC lower */ + + CPU_EXCP_DETECTED = (APIEXCP_DART | APIEXCP_ADI0 | APIEXCP_ADI1 | + APIEXCP_STAT | APIEXCP_DERR | APIEXCP_ADRS0 | + APIEXCP_ADRS1), + UECC_EXCP_DETECTED = (APIEXCP_ECC_UE_H | APIEXCP_ECC_UE_L), + CECC_EXCP_DETECTED = (APIEXCP_ECC_CE_H | APIEXCP_ECC_CE_L), + ECC_EXCP_DETECTED = (UECC_EXCP_DETECTED | CECC_EXCP_DETECTED), +}; + +/************************************************************ + * Memory Bus Configuration Register (MBCR) +************************************************************/ +#define REG_MBCR_OFFSET 0x2190 +#define MBCR_64BITCFG_SHIFT 23 +#define MBCR_64BITCFG_MASK (1UL << MBCR_64BITCFG_SHIFT) +#define MBCR_64BITBUS_SHIFT 22 +#define MBCR_64BITBUS_MASK (1UL << MBCR_64BITBUS_SHIFT) + +/************************************************************ + * Memory Bank Mode Register (MBMR) +************************************************************/ +#define REG_MBMR_OFFSET 0x21C0 +#define MBMR_MODE_MAX_VALUE 0xF +#define MBMR_MODE_SHIFT 25 +#define MBMR_MODE_MASK (MBMR_MODE_MAX_VALUE << MBMR_MODE_SHIFT) +#define MBMR_BBA_SHIFT 24 +#define MBMR_BBA_MASK (1UL << MBMR_BBA_SHIFT) + +/************************************************************ + * Memory Bank Boundary Address Register (MBBAR) + ************************************************************/ +#define REG_MBBAR_OFFSET 0x21D0 +#define MBBAR_BBA_MAX_VALUE 0xFF +#define MBBAR_BBA_SHIFT 24 +#define MBBAR_BBA_MASK (MBBAR_BBA_MAX_VALUE << MBBAR_BBA_SHIFT) + +/************************************************************ + * Memory Scrub Control Register (MSCR) + ************************************************************/ +#define REG_MSCR_OFFSET 0x2400 +#define MSCR_SCRUB_MOD_MASK 0xC0000000 /* scrub_mod - bit0:1*/ +#define MSCR_BACKGR_SCRUB 0x40000000 /* 01 */ +#define MSCR_SI_SHIFT 16 /* si - bit8:15*/ +#define MSCR_SI_MAX_VALUE 0xFF +#define MSCR_SI_MASK (MSCR_SI_MAX_VALUE << MSCR_SI_SHIFT) + +/************************************************************ + * Memory Scrub Range Start Register (MSRSR) + ************************************************************/ +#define REG_MSRSR_OFFSET 0x2410 + +/************************************************************ + * Memory Scrub Range End Register (MSRER) + ************************************************************/ +#define REG_MSRER_OFFSET 0x2420 + +/************************************************************ + * Memory Scrub Pattern Register (MSPR) + ************************************************************/ +#define REG_MSPR_OFFSET 0x2430 + +/************************************************************ + * Memory Check Control Register (MCCR) + ************************************************************/ +#define REG_MCCR_OFFSET 0x2440 +enum mccr_bits { + MCCR_ECC_EN = CPC925_BIT(0), /* ECC high and low check */ +}; + +/************************************************************ + * Memory Check Range End Register (MCRER) + ************************************************************/ +#define REG_MCRER_OFFSET 0x2450 + +/************************************************************ + * Memory Error Address Register (MEAR) + ************************************************************/ +#define REG_MEAR_OFFSET 0x2460 +#define MEAR_BCNT_MAX_VALUE 0x3 +#define MEAR_BCNT_SHIFT 30 +#define MEAR_BCNT_MASK (MEAR_BCNT_MAX_VALUE << MEAR_BCNT_SHIFT) +#define MEAR_RANK_MAX_VALUE 0x7 +#define MEAR_RANK_SHIFT 27 +#define MEAR_RANK_MASK (MEAR_RANK_MAX_VALUE << MEAR_RANK_SHIFT) +#define MEAR_COL_MAX_VALUE 0x7FF +#define MEAR_COL_SHIFT 16 +#define MEAR_COL_MASK (MEAR_COL_MAX_VALUE << MEAR_COL_SHIFT) +#define MEAR_BANK_MAX_VALUE 0x3 +#define MEAR_BANK_SHIFT 14 +#define MEAR_BANK_MASK (MEAR_BANK_MAX_VALUE << MEAR_BANK_SHIFT) +#define MEAR_ROW_MASK 0x00003FFF + +/************************************************************ + * Memory Error Syndrome Register (MESR) + ************************************************************/ +#define REG_MESR_OFFSET 0x2470 +#define MESR_ECC_SYN_H_MASK 0xFF00 +#define MESR_ECC_SYN_L_MASK 0x00FF + +/************************************************************ + * Memory Mode Control Register (MMCR) + ************************************************************/ +#define REG_MMCR_OFFSET 0x2500 +enum mmcr_bits { + MMCR_REG_DIMM_MODE = CPC925_BIT(3), +}; + +/* + * HyperTransport Link Registers + */ +/************************************************************ + * Error Handling/Enumeration Scratch Pad Register (ERRCTRL) + ************************************************************/ +#define REG_ERRCTRL_OFFSET 0x70140 +enum errctrl_bits { /* nonfatal interrupts for */ + ERRCTRL_SERR_NF = CPC925_BIT(0), /* system error */ + ERRCTRL_CRC_NF = CPC925_BIT(1), /* CRC error */ + ERRCTRL_RSP_NF = CPC925_BIT(2), /* Response error */ + ERRCTRL_EOC_NF = CPC925_BIT(3), /* End-Of-Chain error */ + ERRCTRL_OVF_NF = CPC925_BIT(4), /* Overflow error */ + ERRCTRL_PROT_NF = CPC925_BIT(5), /* Protocol error */ + + ERRCTRL_RSP_ERR = CPC925_BIT(6), /* Response error received */ + ERRCTRL_CHN_FAL = CPC925_BIT(7), /* Sync flooding detected */ + + HT_ERRCTRL_ENABLE = (ERRCTRL_SERR_NF | ERRCTRL_CRC_NF | + ERRCTRL_RSP_NF | ERRCTRL_EOC_NF | + ERRCTRL_OVF_NF | ERRCTRL_PROT_NF), + HT_ERRCTRL_DETECTED = (ERRCTRL_RSP_ERR | ERRCTRL_CHN_FAL), +}; + +/************************************************************ + * Link Configuration and Link Control Register (LINKCTRL) + ************************************************************/ +#define REG_LINKCTRL_OFFSET 0x70110 +enum linkctrl_bits { + LINKCTRL_CRC_ERR = (CPC925_BIT(22) | CPC925_BIT(23)), + LINKCTRL_LINK_FAIL = CPC925_BIT(27), + + HT_LINKCTRL_DETECTED = (LINKCTRL_CRC_ERR | LINKCTRL_LINK_FAIL), +}; + +/************************************************************ + * Link FreqCap/Error/Freq/Revision ID Register (LINKERR) + ************************************************************/ +#define REG_LINKERR_OFFSET 0x70120 +enum linkerr_bits { + LINKERR_EOC_ERR = CPC925_BIT(17), /* End-Of-Chain error */ + LINKERR_OVF_ERR = CPC925_BIT(18), /* Receive Buffer Overflow */ + LINKERR_PROT_ERR = CPC925_BIT(19), /* Protocol error */ + + HT_LINKERR_DETECTED = (LINKERR_EOC_ERR | LINKERR_OVF_ERR | + LINKERR_PROT_ERR), +}; + +/************************************************************ + * Bridge Control Register (BRGCTRL) + ************************************************************/ +#define REG_BRGCTRL_OFFSET 0x70300 +enum brgctrl_bits { + BRGCTRL_DETSERR = CPC925_BIT(0), /* SERR on Secondary Bus */ + BRGCTRL_SECBUSRESET = CPC925_BIT(9), /* Secondary Bus Reset */ +}; + +/* Private structure for edac memory controller */ +struct cpc925_mc_pdata { + void __iomem *vbase; + unsigned long total_mem; + const char *name; + int edac_idx; +}; + +/* Private structure for common edac device */ +struct cpc925_dev_info { + void __iomem *vbase; + struct platform_device *pdev; + char *ctl_name; + int edac_idx; + struct edac_device_ctl_info *edac_dev; + void (*init)(struct cpc925_dev_info *dev_info); + void (*exit)(struct cpc925_dev_info *dev_info); + void (*check)(struct edac_device_ctl_info *edac_dev); +}; + +/* Get total memory size from Open Firmware DTB */ +static void get_total_mem(struct cpc925_mc_pdata *pdata) +{ + struct device_node *np = NULL; + const unsigned int *reg, *reg_end; + int len, sw, aw; + unsigned long start, size; + + np = of_find_node_by_type(NULL, "memory"); + if (!np) + return; + + aw = of_n_addr_cells(np); + sw = of_n_size_cells(np); + reg = (const unsigned int *)of_get_property(np, "reg", &len); + reg_end = reg + len/4; + + pdata->total_mem = 0; + do { + start = of_read_number(reg, aw); + reg += aw; + size = of_read_number(reg, sw); + reg += sw; + edac_dbg(1, "start 0x%lx, size 0x%lx\n", start, size); + pdata->total_mem += size; + } while (reg < reg_end); + + of_node_put(np); + edac_dbg(0, "total_mem 0x%lx\n", pdata->total_mem); +} + +static void cpc925_init_csrows(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + struct csrow_info *csrow; + struct dimm_info *dimm; + enum dev_type dtype; + int index, j; + u32 mbmr, mbbar, bba, grain; + unsigned long row_size, nr_pages, last_nr_pages = 0; + + get_total_mem(pdata); + + for (index = 0; index < mci->nr_csrows; index++) { + mbmr = __raw_readl(pdata->vbase + REG_MBMR_OFFSET + + 0x20 * index); + mbbar = __raw_readl(pdata->vbase + REG_MBBAR_OFFSET + + 0x20 + index); + bba = (((mbmr & MBMR_BBA_MASK) >> MBMR_BBA_SHIFT) << 8) | + ((mbbar & MBBAR_BBA_MASK) >> MBBAR_BBA_SHIFT); + + if (bba == 0) + continue; /* not populated */ + + csrow = mci->csrows[index]; + + row_size = bba * (1UL << 28); /* 256M */ + csrow->first_page = last_nr_pages; + nr_pages = row_size >> PAGE_SHIFT; + csrow->last_page = csrow->first_page + nr_pages - 1; + last_nr_pages = csrow->last_page + 1; + + switch (csrow->nr_channels) { + case 1: /* Single channel */ + grain = 32; /* four-beat burst of 32 bytes */ + break; + case 2: /* Dual channel */ + default: + grain = 64; /* four-beat burst of 64 bytes */ + break; + } + switch ((mbmr & MBMR_MODE_MASK) >> MBMR_MODE_SHIFT) { + case 6: /* 0110, no way to differentiate X8 VS X16 */ + case 5: /* 0101 */ + case 8: /* 1000 */ + dtype = DEV_X16; + break; + case 7: /* 0111 */ + case 9: /* 1001 */ + dtype = DEV_X8; + break; + default: + dtype = DEV_UNKNOWN; + break; + } + for (j = 0; j < csrow->nr_channels; j++) { + dimm = csrow->channels[j]->dimm; + dimm->nr_pages = nr_pages / csrow->nr_channels; + dimm->mtype = MEM_RDDR; + dimm->edac_mode = EDAC_SECDED; + dimm->grain = grain; + dimm->dtype = dtype; + } + } +} + +/* Enable memory controller ECC detection */ +static void cpc925_mc_init(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + u32 apimask; + u32 mccr; + + /* Enable various ECC error exceptions */ + apimask = __raw_readl(pdata->vbase + REG_APIMASK_OFFSET); + if ((apimask & ECC_MASK_ENABLE) == 0) { + apimask |= ECC_MASK_ENABLE; + __raw_writel(apimask, pdata->vbase + REG_APIMASK_OFFSET); + } + + /* Enable ECC detection */ + mccr = __raw_readl(pdata->vbase + REG_MCCR_OFFSET); + if ((mccr & MCCR_ECC_EN) == 0) { + mccr |= MCCR_ECC_EN; + __raw_writel(mccr, pdata->vbase + REG_MCCR_OFFSET); + } +} + +/* Disable memory controller ECC detection */ +static void cpc925_mc_exit(struct mem_ctl_info *mci) +{ + /* + * WARNING: + * We are supposed to clear the ECC error detection bits, + * and it will be no problem to do so. However, once they + * are cleared here if we want to re-install CPC925 EDAC + * module later, setting them up in cpc925_mc_init() will + * trigger machine check exception. + * Also, it's ok to leave ECC error detection bits enabled, + * since they are reset to 1 by default or by boot loader. + */ + + return; +} + +/* + * Revert DDR column/row/bank addresses into page frame number and + * offset in page. + * + * Suppose memory mode is 0x0111(128-bit mode, identical DIMM pairs), + * physical address(PA) bits to column address(CA) bits mappings are: + * CA 0 1 2 3 4 5 6 7 8 9 10 + * PA 59 58 57 56 55 54 53 52 51 50 49 + * + * physical address(PA) bits to bank address(BA) bits mappings are: + * BA 0 1 + * PA 43 44 + * + * physical address(PA) bits to row address(RA) bits mappings are: + * RA 0 1 2 3 4 5 6 7 8 9 10 11 12 + * PA 36 35 34 48 47 46 45 40 41 42 39 38 37 + */ +static void cpc925_mc_get_pfn(struct mem_ctl_info *mci, u32 mear, + unsigned long *pfn, unsigned long *offset, int *csrow) +{ + u32 bcnt, rank, col, bank, row; + u32 c; + unsigned long pa; + int i; + + bcnt = (mear & MEAR_BCNT_MASK) >> MEAR_BCNT_SHIFT; + rank = (mear & MEAR_RANK_MASK) >> MEAR_RANK_SHIFT; + col = (mear & MEAR_COL_MASK) >> MEAR_COL_SHIFT; + bank = (mear & MEAR_BANK_MASK) >> MEAR_BANK_SHIFT; + row = mear & MEAR_ROW_MASK; + + *csrow = rank; + +#ifdef CONFIG_EDAC_DEBUG + if (mci->csrows[rank]->first_page == 0) { + cpc925_mc_printk(mci, KERN_ERR, "ECC occurs in a " + "non-populated csrow, broken hardware?\n"); + return; + } +#endif + + /* Revert csrow number */ + pa = mci->csrows[rank]->first_page << PAGE_SHIFT; + + /* Revert column address */ + col += bcnt; + for (i = 0; i < 11; i++) { + c = col & 0x1; + col >>= 1; + pa |= c << (14 - i); + } + + /* Revert bank address */ + pa |= bank << 19; + + /* Revert row address, in 4 steps */ + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (26 - i); + } + + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (21 + i); + } + + for (i = 0; i < 4; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (18 - i); + } + + for (i = 0; i < 3; i++) { + c = row & 0x1; + row >>= 1; + pa |= c << (29 - i); + } + + *offset = pa & (PAGE_SIZE - 1); + *pfn = pa >> PAGE_SHIFT; + + edac_dbg(0, "ECC physical address 0x%lx\n", pa); +} + +static int cpc925_mc_find_channel(struct mem_ctl_info *mci, u16 syndrome) +{ + if ((syndrome & MESR_ECC_SYN_H_MASK) == 0) + return 0; + + if ((syndrome & MESR_ECC_SYN_L_MASK) == 0) + return 1; + + cpc925_mc_printk(mci, KERN_INFO, "Unexpected syndrome value: 0x%x\n", + syndrome); + return 1; +} + +/* Check memory controller registers for ECC errors */ +static void cpc925_mc_check(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + u32 apiexcp; + u32 mear; + u32 mesr; + u16 syndrome; + unsigned long pfn = 0, offset = 0; + int csrow = 0, channel = 0; + + /* APIEXCP is cleared when read */ + apiexcp = __raw_readl(pdata->vbase + REG_APIEXCP_OFFSET); + if ((apiexcp & ECC_EXCP_DETECTED) == 0) + return; + + mesr = __raw_readl(pdata->vbase + REG_MESR_OFFSET); + syndrome = mesr | (MESR_ECC_SYN_H_MASK | MESR_ECC_SYN_L_MASK); + + mear = __raw_readl(pdata->vbase + REG_MEAR_OFFSET); + + /* Revert column/row addresses into page frame number, etc */ + cpc925_mc_get_pfn(mci, mear, &pfn, &offset, &csrow); + + if (apiexcp & CECC_EXCP_DETECTED) { + cpc925_mc_printk(mci, KERN_INFO, "DRAM CECC Fault\n"); + channel = cpc925_mc_find_channel(mci, syndrome); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + pfn, offset, syndrome, + csrow, channel, -1, + mci->ctl_name, ""); + } + + if (apiexcp & UECC_EXCP_DETECTED) { + cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n"); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + pfn, offset, 0, + csrow, -1, -1, + mci->ctl_name, ""); + } + + cpc925_mc_printk(mci, KERN_INFO, "Dump registers:\n"); + cpc925_mc_printk(mci, KERN_INFO, "APIMASK 0x%08x\n", + __raw_readl(pdata->vbase + REG_APIMASK_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "APIEXCP 0x%08x\n", + apiexcp); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Ctrl 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSCR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge Start 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSRSR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Rge End 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSRER_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Scrub Pattern 0x%08x\n", + __raw_readl(pdata->vbase + REG_MSPR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Ctrl 0x%08x\n", + __raw_readl(pdata->vbase + REG_MCCR_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Chk Rge End 0x%08x\n", + __raw_readl(pdata->vbase + REG_MCRER_OFFSET)); + cpc925_mc_printk(mci, KERN_INFO, "Mem Err Address 0x%08x\n", + mesr); + cpc925_mc_printk(mci, KERN_INFO, "Mem Err Syndrome 0x%08x\n", + syndrome); +} + +/******************** CPU err device********************************/ +static u32 cpc925_cpu_mask_disabled(void) +{ + struct device_node *cpunode; + static u32 mask = 0; + + /* use cached value if available */ + if (mask != 0) + return mask; + + mask = APIMASK_ADI0 | APIMASK_ADI1; + + for_each_of_cpu_node(cpunode) { + const u32 *reg = of_get_property(cpunode, "reg", NULL); + if (reg == NULL || *reg > 2) { + cpc925_printk(KERN_ERR, "Bad reg value at %pOF\n", cpunode); + continue; + } + + mask &= ~APIMASK_ADI(*reg); + } + + if (mask != (APIMASK_ADI0 | APIMASK_ADI1)) { + /* We assume that each CPU sits on it's own PI and that + * for present CPUs the reg property equals to the PI + * interface id */ + cpc925_printk(KERN_WARNING, + "Assuming PI id is equal to CPU MPIC id!\n"); + } + + return mask; +} + +/* Enable CPU Errors detection */ +static void cpc925_cpu_init(struct cpc925_dev_info *dev_info) +{ + u32 apimask; + u32 cpumask; + + apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); + + cpumask = cpc925_cpu_mask_disabled(); + if (apimask & cpumask) { + cpc925_printk(KERN_WARNING, "CPU(s) not present, " + "but enabled in APIMASK, disabling\n"); + apimask &= ~cpumask; + } + + if ((apimask & CPU_MASK_ENABLE) == 0) + apimask |= CPU_MASK_ENABLE; + + __raw_writel(apimask, dev_info->vbase + REG_APIMASK_OFFSET); +} + +/* Disable CPU Errors detection */ +static void cpc925_cpu_exit(struct cpc925_dev_info *dev_info) +{ + /* + * WARNING: + * We are supposed to clear the CPU error detection bits, + * and it will be no problem to do so. However, once they + * are cleared here if we want to re-install CPC925 EDAC + * module later, setting them up in cpc925_cpu_init() will + * trigger machine check exception. + * Also, it's ok to leave CPU error detection bits enabled, + * since they are reset to 1 by default. + */ + + return; +} + +/* Check for CPU Errors */ +static void cpc925_cpu_check(struct edac_device_ctl_info *edac_dev) +{ + struct cpc925_dev_info *dev_info = edac_dev->pvt_info; + u32 apiexcp; + u32 apimask; + + /* APIEXCP is cleared when read */ + apiexcp = __raw_readl(dev_info->vbase + REG_APIEXCP_OFFSET); + if ((apiexcp & CPU_EXCP_DETECTED) == 0) + return; + + if ((apiexcp & ~cpc925_cpu_mask_disabled()) == 0) + return; + + apimask = __raw_readl(dev_info->vbase + REG_APIMASK_OFFSET); + cpc925_printk(KERN_INFO, "Processor Interface Fault\n" + "Processor Interface register dump:\n"); + cpc925_printk(KERN_INFO, "APIMASK 0x%08x\n", apimask); + cpc925_printk(KERN_INFO, "APIEXCP 0x%08x\n", apiexcp); + + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); +} + +/******************** HT Link err device****************************/ +/* Enable HyperTransport Link Error detection */ +static void cpc925_htlink_init(struct cpc925_dev_info *dev_info) +{ + u32 ht_errctrl; + + ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + if ((ht_errctrl & HT_ERRCTRL_ENABLE) == 0) { + ht_errctrl |= HT_ERRCTRL_ENABLE; + __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); + } +} + +/* Disable HyperTransport Link Error detection */ +static void cpc925_htlink_exit(struct cpc925_dev_info *dev_info) +{ + u32 ht_errctrl; + + ht_errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + ht_errctrl &= ~HT_ERRCTRL_ENABLE; + __raw_writel(ht_errctrl, dev_info->vbase + REG_ERRCTRL_OFFSET); +} + +/* Check for HyperTransport Link errors */ +static void cpc925_htlink_check(struct edac_device_ctl_info *edac_dev) +{ + struct cpc925_dev_info *dev_info = edac_dev->pvt_info; + u32 brgctrl = __raw_readl(dev_info->vbase + REG_BRGCTRL_OFFSET); + u32 linkctrl = __raw_readl(dev_info->vbase + REG_LINKCTRL_OFFSET); + u32 errctrl = __raw_readl(dev_info->vbase + REG_ERRCTRL_OFFSET); + u32 linkerr = __raw_readl(dev_info->vbase + REG_LINKERR_OFFSET); + + if (!((brgctrl & BRGCTRL_DETSERR) || + (linkctrl & HT_LINKCTRL_DETECTED) || + (errctrl & HT_ERRCTRL_DETECTED) || + (linkerr & HT_LINKERR_DETECTED))) + return; + + cpc925_printk(KERN_INFO, "HT Link Fault\n" + "HT register dump:\n"); + cpc925_printk(KERN_INFO, "Bridge Ctrl 0x%08x\n", + brgctrl); + cpc925_printk(KERN_INFO, "Link Config Ctrl 0x%08x\n", + linkctrl); + cpc925_printk(KERN_INFO, "Error Enum and Ctrl 0x%08x\n", + errctrl); + cpc925_printk(KERN_INFO, "Link Error 0x%08x\n", + linkerr); + + /* Clear by write 1 */ + if (brgctrl & BRGCTRL_DETSERR) + __raw_writel(BRGCTRL_DETSERR, + dev_info->vbase + REG_BRGCTRL_OFFSET); + + if (linkctrl & HT_LINKCTRL_DETECTED) + __raw_writel(HT_LINKCTRL_DETECTED, + dev_info->vbase + REG_LINKCTRL_OFFSET); + + /* Initiate Secondary Bus Reset to clear the chain failure */ + if (errctrl & ERRCTRL_CHN_FAL) + __raw_writel(BRGCTRL_SECBUSRESET, + dev_info->vbase + REG_BRGCTRL_OFFSET); + + if (errctrl & ERRCTRL_RSP_ERR) + __raw_writel(ERRCTRL_RSP_ERR, + dev_info->vbase + REG_ERRCTRL_OFFSET); + + if (linkerr & HT_LINKERR_DETECTED) + __raw_writel(HT_LINKERR_DETECTED, + dev_info->vbase + REG_LINKERR_OFFSET); + + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static struct cpc925_dev_info cpc925_devs[] = { + { + .ctl_name = CPC925_CPU_ERR_DEV, + .init = cpc925_cpu_init, + .exit = cpc925_cpu_exit, + .check = cpc925_cpu_check, + }, + { + .ctl_name = CPC925_HT_LINK_DEV, + .init = cpc925_htlink_init, + .exit = cpc925_htlink_exit, + .check = cpc925_htlink_check, + }, + { } +}; + +/* + * Add CPU Err detection and HyperTransport Link Err detection + * as common "edac_device", they have no corresponding device + * nodes in the Open Firmware DTB and we have to add platform + * devices for them. Also, they will share the MMIO with that + * of memory controller. + */ +static void cpc925_add_edac_devices(void __iomem *vbase) +{ + struct cpc925_dev_info *dev_info; + + if (!vbase) { + cpc925_printk(KERN_ERR, "MMIO not established yet\n"); + return; + } + + for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { + dev_info->vbase = vbase; + dev_info->pdev = platform_device_register_simple( + dev_info->ctl_name, 0, NULL, 0); + if (IS_ERR(dev_info->pdev)) { + cpc925_printk(KERN_ERR, + "Can't register platform device for %s\n", + dev_info->ctl_name); + continue; + } + + /* + * Don't have to allocate private structure but + * make use of cpc925_devs[] instead. + */ + dev_info->edac_idx = edac_device_alloc_index(); + dev_info->edac_dev = + edac_device_alloc_ctl_info(0, dev_info->ctl_name, + 1, NULL, 0, 0, NULL, 0, dev_info->edac_idx); + if (!dev_info->edac_dev) { + cpc925_printk(KERN_ERR, "No memory for edac device\n"); + goto err1; + } + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->pdev->dev; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->mod_name = CPC925_EDAC_MOD_STR; + dev_info->edac_dev->dev_name = dev_name(&dev_info->pdev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = dev_info->check; + + if (dev_info->init) + dev_info->init(dev_info); + + if (edac_device_add_device(dev_info->edac_dev) > 0) { + cpc925_printk(KERN_ERR, + "Unable to add edac device for %s\n", + dev_info->ctl_name); + goto err2; + } + + edac_dbg(0, "Successfully added edac device for %s\n", + dev_info->ctl_name); + + continue; + +err2: + if (dev_info->exit) + dev_info->exit(dev_info); + edac_device_free_ctl_info(dev_info->edac_dev); +err1: + platform_device_unregister(dev_info->pdev); + } +} + +/* + * Delete the common "edac_device" for CPU Err Detection + * and HyperTransport Link Err Detection + */ +static void cpc925_del_edac_devices(void) +{ + struct cpc925_dev_info *dev_info; + + for (dev_info = &cpc925_devs[0]; dev_info->init; dev_info++) { + if (dev_info->edac_dev) { + edac_device_del_device(dev_info->edac_dev->dev); + edac_device_free_ctl_info(dev_info->edac_dev); + platform_device_unregister(dev_info->pdev); + } + + if (dev_info->exit) + dev_info->exit(dev_info); + + edac_dbg(0, "Successfully deleted edac device for %s\n", + dev_info->ctl_name); + } +} + +/* Convert current back-ground scrub rate into byte/sec bandwidth */ +static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci) +{ + struct cpc925_mc_pdata *pdata = mci->pvt_info; + int bw; + u32 mscr; + u8 si; + + mscr = __raw_readl(pdata->vbase + REG_MSCR_OFFSET); + si = (mscr & MSCR_SI_MASK) >> MSCR_SI_SHIFT; + + edac_dbg(0, "Mem Scrub Ctrl Register 0x%x\n", mscr); + + if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) || + (si == 0)) { + cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n"); + bw = 0; + } else + bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si; + + return bw; +} + +/* Return 0 for single channel; 1 for dual channel */ +static int cpc925_mc_get_channels(void __iomem *vbase) +{ + int dual = 0; + u32 mbcr; + + mbcr = __raw_readl(vbase + REG_MBCR_OFFSET); + + /* + * Dual channel only when 128-bit wide physical bus + * and 128-bit configuration. + */ + if (((mbcr & MBCR_64BITCFG_MASK) == 0) && + ((mbcr & MBCR_64BITBUS_MASK) == 0)) + dual = 1; + + edac_dbg(0, "%s channel\n", (dual > 0) ? "Dual" : "Single"); + + return dual; +} + +static int cpc925_probe(struct platform_device *pdev) +{ + static int edac_mc_idx; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + void __iomem *vbase; + struct cpc925_mc_pdata *pdata; + struct resource *r; + int res = 0, nr_channels; + + edac_dbg(0, "%s platform device found!\n", pdev->name); + + if (!devres_open_group(&pdev->dev, cpc925_probe, GFP_KERNEL)) { + res = -ENOMEM; + goto out; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + cpc925_printk(KERN_ERR, "Unable to get resource\n"); + res = -ENOENT; + goto err1; + } + + if (!devm_request_mem_region(&pdev->dev, + r->start, + resource_size(r), + pdev->name)) { + cpc925_printk(KERN_ERR, "Unable to request mem region\n"); + res = -EBUSY; + goto err1; + } + + vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!vbase) { + cpc925_printk(KERN_ERR, "Unable to ioremap device\n"); + res = -ENOMEM; + goto err2; + } + + nr_channels = cpc925_mc_get_channels(vbase) + 1; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = CPC925_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_channels; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, + sizeof(struct cpc925_mc_pdata)); + if (!mci) { + cpc925_printk(KERN_ERR, "No memory for mem_ctl_info\n"); + res = -ENOMEM; + goto err2; + } + + pdata = mci->pvt_info; + pdata->vbase = vbase; + pdata->edac_idx = edac_mc_idx++; + pdata->name = pdev->name; + + mci->pdev = &pdev->dev; + platform_set_drvdata(pdev, mci); + mci->dev_name = dev_name(&pdev->dev); + mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = CPC925_EDAC_MOD_STR; + mci->ctl_name = pdev->name; + + if (edac_op_state == EDAC_OPSTATE_POLL) + mci->edac_check = cpc925_mc_check; + + mci->ctl_page_to_phys = NULL; + mci->scrub_mode = SCRUB_SW_SRC; + mci->set_sdram_scrub_rate = NULL; + mci->get_sdram_scrub_rate = cpc925_get_sdram_scrub_rate; + + cpc925_init_csrows(mci); + + /* Setup memory controller registers */ + cpc925_mc_init(mci); + + if (edac_mc_add_mc(mci) > 0) { + cpc925_mc_printk(mci, KERN_ERR, "Failed edac_mc_add_mc()\n"); + goto err3; + } + + cpc925_add_edac_devices(vbase); + + /* get this far and it's successful */ + edac_dbg(0, "success\n"); + + res = 0; + goto out; + +err3: + cpc925_mc_exit(mci); + edac_mc_free(mci); +err2: + devm_release_mem_region(&pdev->dev, r->start, resource_size(r)); +err1: + devres_release_group(&pdev->dev, cpc925_probe); +out: + return res; +} + +static int cpc925_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + /* + * Delete common edac devices before edac mc, because + * the former share the MMIO of the latter. + */ + cpc925_del_edac_devices(); + cpc925_mc_exit(mci); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static struct platform_driver cpc925_edac_driver = { + .probe = cpc925_probe, + .remove = cpc925_remove, + .driver = { + .name = "cpc925_edac", + } +}; + +static int __init cpc925_edac_init(void) +{ + int ret = 0; + + printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n"); + printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n"); + + /* Only support POLL mode so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + ret = platform_driver_register(&cpc925_edac_driver); + if (ret) { + printk(KERN_WARNING "Failed to register %s\n", + CPC925_EDAC_MOD_STR); + } + + return ret; +} + +static void __exit cpc925_edac_exit(void) +{ + platform_driver_unregister(&cpc925_edac_driver); +} + +module_init(cpc925_edac_init); +module_exit(cpc925_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao <qingtao.cao@windriver.com>"); +MODULE_DESCRIPTION("IBM CPC925 Bridge and MC EDAC kernel module"); diff --git a/drivers/edac/debugfs.c b/drivers/edac/debugfs.c new file mode 100644 index 000000000..4804332d9 --- /dev/null +++ b/drivers/edac/debugfs.c @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "edac_module.h" + +static struct dentry *edac_debugfs; + +static ssize_t edac_fake_inject_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct device *dev = file->private_data; + struct mem_ctl_info *mci = to_mci(dev); + static enum hw_event_mc_err_type type; + u16 errcount = mci->fake_inject_count; + + if (!errcount) + errcount = 1; + + type = mci->fake_inject_ue ? HW_EVENT_ERR_UNCORRECTED + : HW_EVENT_ERR_CORRECTED; + + printk(KERN_DEBUG + "Generating %d %s fake error%s to %d.%d.%d to test core handling. NOTE: this won't test the driver-specific decoding logic.\n", + errcount, + (type == HW_EVENT_ERR_UNCORRECTED) ? "UE" : "CE", + errcount > 1 ? "s" : "", + mci->fake_inject_layer[0], + mci->fake_inject_layer[1], + mci->fake_inject_layer[2] + ); + edac_mc_handle_error(type, mci, errcount, 0, 0, 0, + mci->fake_inject_layer[0], + mci->fake_inject_layer[1], + mci->fake_inject_layer[2], + "FAKE ERROR", "for EDAC testing only"); + + return count; +} + +static const struct file_operations debug_fake_inject_fops = { + .open = simple_open, + .write = edac_fake_inject_write, + .llseek = generic_file_llseek, +}; + +void __init edac_debugfs_init(void) +{ + edac_debugfs = debugfs_create_dir("edac", NULL); +} + +void edac_debugfs_exit(void) +{ + debugfs_remove_recursive(edac_debugfs); +} + +void edac_create_debugfs_nodes(struct mem_ctl_info *mci) +{ + struct dentry *parent; + char name[80]; + int i; + + parent = debugfs_create_dir(mci->dev.kobj.name, edac_debugfs); + + for (i = 0; i < mci->n_layers; i++) { + sprintf(name, "fake_inject_%s", + edac_layer_name[mci->layers[i].type]); + debugfs_create_u8(name, S_IRUGO | S_IWUSR, parent, + &mci->fake_inject_layer[i]); + } + + debugfs_create_bool("fake_inject_ue", S_IRUGO | S_IWUSR, parent, + &mci->fake_inject_ue); + + debugfs_create_u16("fake_inject_count", S_IRUGO | S_IWUSR, parent, + &mci->fake_inject_count); + + debugfs_create_file("fake_inject", S_IWUSR, parent, &mci->dev, + &debug_fake_inject_fops); + + mci->debugfs = parent; +} + +/* Create a toplevel dir under EDAC's debugfs hierarchy */ +struct dentry *edac_debugfs_create_dir(const char *dirname) +{ + if (!edac_debugfs) + return NULL; + + return debugfs_create_dir(dirname, edac_debugfs); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_dir); + +/* Create a toplevel dir under EDAC's debugfs hierarchy with parent @parent */ +struct dentry * +edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent) +{ + return debugfs_create_dir(dirname, parent); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_dir_at); + +/* + * Create a file under EDAC's hierarchy or a sub-hierarchy: + * + * @name: file name + * @mode: file permissions + * @parent: parent dentry. If NULL, it becomes the toplevel EDAC dir + * @data: private data of caller + * @fops: file operations of this file + */ +struct dentry * +edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent, + void *data, const struct file_operations *fops) +{ + if (!parent) + parent = edac_debugfs; + + return debugfs_create_file(name, mode, parent, data, fops); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_file); + +/* Wrapper for debugfs_create_x8() */ +void edac_debugfs_create_x8(const char *name, umode_t mode, + struct dentry *parent, u8 *value) +{ + if (!parent) + parent = edac_debugfs; + + debugfs_create_x8(name, mode, parent, value); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_x8); + +/* Wrapper for debugfs_create_x16() */ +void edac_debugfs_create_x16(const char *name, umode_t mode, + struct dentry *parent, u16 *value) +{ + if (!parent) + parent = edac_debugfs; + + debugfs_create_x16(name, mode, parent, value); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_x16); + +/* Wrapper for debugfs_create_x32() */ +void edac_debugfs_create_x32(const char *name, umode_t mode, + struct dentry *parent, u32 *value) +{ + if (!parent) + parent = edac_debugfs; + + debugfs_create_x32(name, mode, parent, value); +} +EXPORT_SYMBOL_GPL(edac_debugfs_create_x32); diff --git a/drivers/edac/dmc520_edac.c b/drivers/edac/dmc520_edac.c new file mode 100644 index 000000000..1fa5ca57e --- /dev/null +++ b/drivers/edac/dmc520_edac.c @@ -0,0 +1,656 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * EDAC driver for DMC-520 memory controller. + * + * The driver supports 10 interrupt lines, + * though only dram_ecc_errc and dram_ecc_errd are currently handled. + * + * Authors: Rui Zhao <ruizhao@microsoft.com> + * Lei Wang <lewan@microsoft.com> + * Shiping Ji <shji@microsoft.com> + */ + +#include <linux/bitfield.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include "edac_mc.h" + +/* DMC-520 registers */ +#define REG_OFFSET_FEATURE_CONFIG 0x130 +#define REG_OFFSET_ECC_ERRC_COUNT_31_00 0x158 +#define REG_OFFSET_ECC_ERRC_COUNT_63_32 0x15C +#define REG_OFFSET_ECC_ERRD_COUNT_31_00 0x160 +#define REG_OFFSET_ECC_ERRD_COUNT_63_32 0x164 +#define REG_OFFSET_INTERRUPT_CONTROL 0x500 +#define REG_OFFSET_INTERRUPT_CLR 0x508 +#define REG_OFFSET_INTERRUPT_STATUS 0x510 +#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00 0x528 +#define REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32 0x52C +#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00 0x530 +#define REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32 0x534 +#define REG_OFFSET_ADDRESS_CONTROL_NOW 0x1010 +#define REG_OFFSET_MEMORY_TYPE_NOW 0x1128 +#define REG_OFFSET_SCRUB_CONTROL0_NOW 0x1170 +#define REG_OFFSET_FORMAT_CONTROL 0x18 + +/* DMC-520 types, masks and bitfields */ +#define RAM_ECC_INT_CE_BIT BIT(0) +#define RAM_ECC_INT_UE_BIT BIT(1) +#define DRAM_ECC_INT_CE_BIT BIT(2) +#define DRAM_ECC_INT_UE_BIT BIT(3) +#define FAILED_ACCESS_INT_BIT BIT(4) +#define FAILED_PROG_INT_BIT BIT(5) +#define LINK_ERR_INT_BIT BIT(6) +#define TEMPERATURE_EVENT_INT_BIT BIT(7) +#define ARCH_FSM_INT_BIT BIT(8) +#define PHY_REQUEST_INT_BIT BIT(9) +#define MEMORY_WIDTH_MASK GENMASK(1, 0) +#define SCRUB_TRIGGER0_NEXT_MASK GENMASK(1, 0) +#define REG_FIELD_DRAM_ECC_ENABLED GENMASK(1, 0) +#define REG_FIELD_MEMORY_TYPE GENMASK(2, 0) +#define REG_FIELD_DEVICE_WIDTH GENMASK(9, 8) +#define REG_FIELD_ADDRESS_CONTROL_COL GENMASK(2, 0) +#define REG_FIELD_ADDRESS_CONTROL_ROW GENMASK(10, 8) +#define REG_FIELD_ADDRESS_CONTROL_BANK GENMASK(18, 16) +#define REG_FIELD_ADDRESS_CONTROL_RANK GENMASK(25, 24) +#define REG_FIELD_ERR_INFO_LOW_VALID BIT(0) +#define REG_FIELD_ERR_INFO_LOW_COL GENMASK(10, 1) +#define REG_FIELD_ERR_INFO_LOW_ROW GENMASK(28, 11) +#define REG_FIELD_ERR_INFO_LOW_RANK GENMASK(31, 29) +#define REG_FIELD_ERR_INFO_HIGH_BANK GENMASK(3, 0) +#define REG_FIELD_ERR_INFO_HIGH_VALID BIT(31) + +#define DRAM_ADDRESS_CONTROL_MIN_COL_BITS 8 +#define DRAM_ADDRESS_CONTROL_MIN_ROW_BITS 11 + +#define DMC520_SCRUB_TRIGGER_ERR_DETECT 2 +#define DMC520_SCRUB_TRIGGER_IDLE 3 + +/* Driver settings */ +/* + * The max-length message would be: "rank:7 bank:15 row:262143 col:1023". + * Max length is 34. Using a 40-size buffer is enough. + */ +#define DMC520_MSG_BUF_SIZE 40 +#define EDAC_MOD_NAME "dmc520-edac" +#define EDAC_CTL_NAME "dmc520" + +/* the data bus width for the attached memory chips. */ +enum dmc520_mem_width { + MEM_WIDTH_X32 = 2, + MEM_WIDTH_X64 = 3 +}; + +/* memory type */ +enum dmc520_mem_type { + MEM_TYPE_DDR3 = 1, + MEM_TYPE_DDR4 = 2 +}; + +/* memory device width */ +enum dmc520_dev_width { + DEV_WIDTH_X4 = 0, + DEV_WIDTH_X8 = 1, + DEV_WIDTH_X16 = 2 +}; + +struct ecc_error_info { + u32 col; + u32 row; + u32 bank; + u32 rank; +}; + +/* The interrupt config */ +struct dmc520_irq_config { + char *name; + int mask; +}; + +/* The interrupt mappings */ +static struct dmc520_irq_config dmc520_irq_configs[] = { + { + .name = "ram_ecc_errc", + .mask = RAM_ECC_INT_CE_BIT + }, + { + .name = "ram_ecc_errd", + .mask = RAM_ECC_INT_UE_BIT + }, + { + .name = "dram_ecc_errc", + .mask = DRAM_ECC_INT_CE_BIT + }, + { + .name = "dram_ecc_errd", + .mask = DRAM_ECC_INT_UE_BIT + }, + { + .name = "failed_access", + .mask = FAILED_ACCESS_INT_BIT + }, + { + .name = "failed_prog", + .mask = FAILED_PROG_INT_BIT + }, + { + .name = "link_err", + .mask = LINK_ERR_INT_BIT + }, + { + .name = "temperature_event", + .mask = TEMPERATURE_EVENT_INT_BIT + }, + { + .name = "arch_fsm", + .mask = ARCH_FSM_INT_BIT + }, + { + .name = "phy_request", + .mask = PHY_REQUEST_INT_BIT + } +}; + +#define NUMBER_OF_IRQS ARRAY_SIZE(dmc520_irq_configs) + +/* + * The EDAC driver private data. + * error_lock is to protect concurrent writes to the mci->error_desc through + * edac_mc_handle_error(). + */ +struct dmc520_edac { + void __iomem *reg_base; + spinlock_t error_lock; + u32 mem_width_in_bytes; + int irqs[NUMBER_OF_IRQS]; + int masks[NUMBER_OF_IRQS]; +}; + +static int dmc520_mc_idx; + +static u32 dmc520_read_reg(struct dmc520_edac *pvt, u32 offset) +{ + return readl(pvt->reg_base + offset); +} + +static void dmc520_write_reg(struct dmc520_edac *pvt, u32 val, u32 offset) +{ + writel(val, pvt->reg_base + offset); +} + +static u32 dmc520_calc_dram_ecc_error(u32 value) +{ + u32 total = 0; + + /* Each rank's error counter takes one byte. */ + while (value > 0) { + total += (value & 0xFF); + value >>= 8; + } + return total; +} + +static u32 dmc520_get_dram_ecc_error_count(struct dmc520_edac *pvt, + bool is_ce) +{ + u32 reg_offset_low, reg_offset_high; + u32 err_low, err_high; + u32 err_count; + + reg_offset_low = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_31_00 : + REG_OFFSET_ECC_ERRD_COUNT_31_00; + reg_offset_high = is_ce ? REG_OFFSET_ECC_ERRC_COUNT_63_32 : + REG_OFFSET_ECC_ERRD_COUNT_63_32; + + err_low = dmc520_read_reg(pvt, reg_offset_low); + err_high = dmc520_read_reg(pvt, reg_offset_high); + /* Reset error counters */ + dmc520_write_reg(pvt, 0, reg_offset_low); + dmc520_write_reg(pvt, 0, reg_offset_high); + + err_count = dmc520_calc_dram_ecc_error(err_low) + + dmc520_calc_dram_ecc_error(err_high); + + return err_count; +} + +static void dmc520_get_dram_ecc_error_info(struct dmc520_edac *pvt, + bool is_ce, + struct ecc_error_info *info) +{ + u32 reg_offset_low, reg_offset_high; + u32 reg_val_low, reg_val_high; + bool valid; + + reg_offset_low = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_31_00 : + REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_31_00; + reg_offset_high = is_ce ? REG_OFFSET_DRAM_ECC_ERRC_INT_INFO_63_32 : + REG_OFFSET_DRAM_ECC_ERRD_INT_INFO_63_32; + + reg_val_low = dmc520_read_reg(pvt, reg_offset_low); + reg_val_high = dmc520_read_reg(pvt, reg_offset_high); + + valid = (FIELD_GET(REG_FIELD_ERR_INFO_LOW_VALID, reg_val_low) != 0) && + (FIELD_GET(REG_FIELD_ERR_INFO_HIGH_VALID, reg_val_high) != 0); + + if (valid) { + info->col = FIELD_GET(REG_FIELD_ERR_INFO_LOW_COL, reg_val_low); + info->row = FIELD_GET(REG_FIELD_ERR_INFO_LOW_ROW, reg_val_low); + info->rank = FIELD_GET(REG_FIELD_ERR_INFO_LOW_RANK, reg_val_low); + info->bank = FIELD_GET(REG_FIELD_ERR_INFO_HIGH_BANK, reg_val_high); + } else { + memset(info, 0, sizeof(*info)); + } +} + +static bool dmc520_is_ecc_enabled(void __iomem *reg_base) +{ + u32 reg_val = readl(reg_base + REG_OFFSET_FEATURE_CONFIG); + + return FIELD_GET(REG_FIELD_DRAM_ECC_ENABLED, reg_val); +} + +static enum scrub_type dmc520_get_scrub_type(struct dmc520_edac *pvt) +{ + enum scrub_type type = SCRUB_NONE; + u32 reg_val, scrub_cfg; + + reg_val = dmc520_read_reg(pvt, REG_OFFSET_SCRUB_CONTROL0_NOW); + scrub_cfg = FIELD_GET(SCRUB_TRIGGER0_NEXT_MASK, reg_val); + + if (scrub_cfg == DMC520_SCRUB_TRIGGER_ERR_DETECT || + scrub_cfg == DMC520_SCRUB_TRIGGER_IDLE) + type = SCRUB_HW_PROG; + + return type; +} + +/* Get the memory data bus width, in number of bytes. */ +static u32 dmc520_get_memory_width(struct dmc520_edac *pvt) +{ + enum dmc520_mem_width mem_width_field; + u32 mem_width_in_bytes = 0; + u32 reg_val; + + reg_val = dmc520_read_reg(pvt, REG_OFFSET_FORMAT_CONTROL); + mem_width_field = FIELD_GET(MEMORY_WIDTH_MASK, reg_val); + + if (mem_width_field == MEM_WIDTH_X32) + mem_width_in_bytes = 4; + else if (mem_width_field == MEM_WIDTH_X64) + mem_width_in_bytes = 8; + return mem_width_in_bytes; +} + +static enum mem_type dmc520_get_mtype(struct dmc520_edac *pvt) +{ + enum mem_type mt = MEM_UNKNOWN; + enum dmc520_mem_type type; + u32 reg_val; + + reg_val = dmc520_read_reg(pvt, REG_OFFSET_MEMORY_TYPE_NOW); + type = FIELD_GET(REG_FIELD_MEMORY_TYPE, reg_val); + + switch (type) { + case MEM_TYPE_DDR3: + mt = MEM_DDR3; + break; + + case MEM_TYPE_DDR4: + mt = MEM_DDR4; + break; + } + + return mt; +} + +static enum dev_type dmc520_get_dtype(struct dmc520_edac *pvt) +{ + enum dmc520_dev_width device_width; + enum dev_type dt = DEV_UNKNOWN; + u32 reg_val; + + reg_val = dmc520_read_reg(pvt, REG_OFFSET_MEMORY_TYPE_NOW); + device_width = FIELD_GET(REG_FIELD_DEVICE_WIDTH, reg_val); + + switch (device_width) { + case DEV_WIDTH_X4: + dt = DEV_X4; + break; + + case DEV_WIDTH_X8: + dt = DEV_X8; + break; + + case DEV_WIDTH_X16: + dt = DEV_X16; + break; + } + + return dt; +} + +static u32 dmc520_get_rank_count(void __iomem *reg_base) +{ + u32 reg_val, rank_bits; + + reg_val = readl(reg_base + REG_OFFSET_ADDRESS_CONTROL_NOW); + rank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_RANK, reg_val); + + return BIT(rank_bits); +} + +static u64 dmc520_get_rank_size(struct dmc520_edac *pvt) +{ + u32 reg_val, col_bits, row_bits, bank_bits; + + reg_val = dmc520_read_reg(pvt, REG_OFFSET_ADDRESS_CONTROL_NOW); + + col_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_COL, reg_val) + + DRAM_ADDRESS_CONTROL_MIN_COL_BITS; + row_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_ROW, reg_val) + + DRAM_ADDRESS_CONTROL_MIN_ROW_BITS; + bank_bits = FIELD_GET(REG_FIELD_ADDRESS_CONTROL_BANK, reg_val); + + return (u64)pvt->mem_width_in_bytes << (col_bits + row_bits + bank_bits); +} + +static void dmc520_handle_dram_ecc_errors(struct mem_ctl_info *mci, + bool is_ce) +{ + struct dmc520_edac *pvt = mci->pvt_info; + char message[DMC520_MSG_BUF_SIZE]; + struct ecc_error_info info; + u32 cnt; + + dmc520_get_dram_ecc_error_info(pvt, is_ce, &info); + + cnt = dmc520_get_dram_ecc_error_count(pvt, is_ce); + if (!cnt) + return; + + snprintf(message, ARRAY_SIZE(message), + "rank:%d bank:%d row:%d col:%d", + info.rank, info.bank, + info.row, info.col); + + spin_lock(&pvt->error_lock); + edac_mc_handle_error((is_ce ? HW_EVENT_ERR_CORRECTED : + HW_EVENT_ERR_UNCORRECTED), + mci, cnt, 0, 0, 0, info.rank, -1, -1, + message, ""); + spin_unlock(&pvt->error_lock); +} + +static irqreturn_t dmc520_edac_dram_ecc_isr(int irq, struct mem_ctl_info *mci, + bool is_ce) +{ + struct dmc520_edac *pvt = mci->pvt_info; + u32 i_mask; + + i_mask = is_ce ? DRAM_ECC_INT_CE_BIT : DRAM_ECC_INT_UE_BIT; + + dmc520_handle_dram_ecc_errors(mci, is_ce); + + dmc520_write_reg(pvt, i_mask, REG_OFFSET_INTERRUPT_CLR); + + return IRQ_HANDLED; +} + +static irqreturn_t dmc520_edac_dram_all_isr(int irq, struct mem_ctl_info *mci, + u32 irq_mask) +{ + struct dmc520_edac *pvt = mci->pvt_info; + irqreturn_t irq_ret = IRQ_NONE; + u32 status; + + status = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_STATUS); + + if ((irq_mask & DRAM_ECC_INT_CE_BIT) && + (status & DRAM_ECC_INT_CE_BIT)) + irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, true); + + if ((irq_mask & DRAM_ECC_INT_UE_BIT) && + (status & DRAM_ECC_INT_UE_BIT)) + irq_ret = dmc520_edac_dram_ecc_isr(irq, mci, false); + + return irq_ret; +} + +static irqreturn_t dmc520_isr(int irq, void *data) +{ + struct mem_ctl_info *mci = data; + struct dmc520_edac *pvt = mci->pvt_info; + u32 mask = 0; + int idx; + + for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { + if (pvt->irqs[idx] == irq) { + mask = pvt->masks[idx]; + break; + } + } + return dmc520_edac_dram_all_isr(irq, mci, mask); +} + +static void dmc520_init_csrow(struct mem_ctl_info *mci) +{ + struct dmc520_edac *pvt = mci->pvt_info; + struct csrow_info *csi; + struct dimm_info *dimm; + u32 pages_per_rank; + enum dev_type dt; + enum mem_type mt; + int row, ch; + u64 rs; + + dt = dmc520_get_dtype(pvt); + mt = dmc520_get_mtype(pvt); + rs = dmc520_get_rank_size(pvt); + pages_per_rank = rs >> PAGE_SHIFT; + + for (row = 0; row < mci->nr_csrows; row++) { + csi = mci->csrows[row]; + + for (ch = 0; ch < csi->nr_channels; ch++) { + dimm = csi->channels[ch]->dimm; + dimm->grain = pvt->mem_width_in_bytes; + dimm->dtype = dt; + dimm->mtype = mt; + dimm->edac_mode = EDAC_SECDED; + dimm->nr_pages = pages_per_rank / csi->nr_channels; + } + } +} + +static int dmc520_edac_probe(struct platform_device *pdev) +{ + bool registered[NUMBER_OF_IRQS] = { false }; + int irqs[NUMBER_OF_IRQS] = { -ENXIO }; + int masks[NUMBER_OF_IRQS] = { 0 }; + struct edac_mc_layer layers[1]; + struct dmc520_edac *pvt = NULL; + struct mem_ctl_info *mci; + void __iomem *reg_base; + u32 irq_mask_all = 0; + struct resource *res; + struct device *dev; + int ret, idx, irq; + u32 reg_val; + + /* Parse the device node */ + dev = &pdev->dev; + + for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { + irq = platform_get_irq_byname_optional(pdev, dmc520_irq_configs[idx].name); + irqs[idx] = irq; + masks[idx] = dmc520_irq_configs[idx].mask; + if (irq >= 0) { + irq_mask_all |= dmc520_irq_configs[idx].mask; + edac_dbg(0, "Discovered %s, irq: %d.\n", dmc520_irq_configs[idx].name, irq); + } + } + + if (!irq_mask_all) { + edac_printk(KERN_ERR, EDAC_MOD_NAME, + "At least one valid interrupt line is expected.\n"); + return -EINVAL; + } + + /* Initialize dmc520 edac */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + if (!dmc520_is_ecc_enabled(reg_base)) + return -ENXIO; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = dmc520_get_rank_count(reg_base); + layers[0].is_virt_csrow = true; + + mci = edac_mc_alloc(dmc520_mc_idx++, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (!mci) { + edac_printk(KERN_ERR, EDAC_MOD_NAME, + "Failed to allocate memory for mc instance\n"); + ret = -ENOMEM; + goto err; + } + + pvt = mci->pvt_info; + + pvt->reg_base = reg_base; + spin_lock_init(&pvt->error_lock); + memcpy(pvt->irqs, irqs, sizeof(irqs)); + memcpy(pvt->masks, masks, sizeof(masks)); + + platform_set_drvdata(pdev, mci); + + mci->pdev = dev; + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR4; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + mci->scrub_mode = dmc520_get_scrub_type(pvt); + mci->ctl_name = EDAC_CTL_NAME; + mci->dev_name = dev_name(mci->pdev); + mci->mod_name = EDAC_MOD_NAME; + + edac_op_state = EDAC_OPSTATE_INT; + + pvt->mem_width_in_bytes = dmc520_get_memory_width(pvt); + + dmc520_init_csrow(mci); + + /* Clear interrupts, not affecting other unrelated interrupts */ + reg_val = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_CONTROL); + dmc520_write_reg(pvt, reg_val & (~irq_mask_all), + REG_OFFSET_INTERRUPT_CONTROL); + dmc520_write_reg(pvt, irq_mask_all, REG_OFFSET_INTERRUPT_CLR); + + for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { + irq = irqs[idx]; + if (irq >= 0) { + ret = devm_request_irq(&pdev->dev, irq, + dmc520_isr, IRQF_SHARED, + dev_name(&pdev->dev), mci); + if (ret < 0) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed to request irq %d\n", irq); + goto err; + } + registered[idx] = true; + } + } + + /* Reset DRAM CE/UE counters */ + if (irq_mask_all & DRAM_ECC_INT_CE_BIT) + dmc520_get_dram_ecc_error_count(pvt, true); + + if (irq_mask_all & DRAM_ECC_INT_UE_BIT) + dmc520_get_dram_ecc_error_count(pvt, false); + + ret = edac_mc_add_mc(mci); + if (ret) { + edac_printk(KERN_ERR, EDAC_MOD_NAME, + "Failed to register with EDAC core\n"); + goto err; + } + + /* Enable interrupts, not affecting other unrelated interrupts */ + dmc520_write_reg(pvt, reg_val | irq_mask_all, + REG_OFFSET_INTERRUPT_CONTROL); + + return 0; + +err: + for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { + if (registered[idx]) + devm_free_irq(&pdev->dev, pvt->irqs[idx], mci); + } + if (mci) + edac_mc_free(mci); + + return ret; +} + +static int dmc520_edac_remove(struct platform_device *pdev) +{ + u32 reg_val, idx, irq_mask_all = 0; + struct mem_ctl_info *mci; + struct dmc520_edac *pvt; + + mci = platform_get_drvdata(pdev); + pvt = mci->pvt_info; + + /* Disable interrupts */ + reg_val = dmc520_read_reg(pvt, REG_OFFSET_INTERRUPT_CONTROL); + dmc520_write_reg(pvt, reg_val & (~irq_mask_all), + REG_OFFSET_INTERRUPT_CONTROL); + + /* free irq's */ + for (idx = 0; idx < NUMBER_OF_IRQS; idx++) { + if (pvt->irqs[idx] >= 0) { + irq_mask_all |= pvt->masks[idx]; + devm_free_irq(&pdev->dev, pvt->irqs[idx], mci); + } + } + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static const struct of_device_id dmc520_edac_driver_id[] = { + { .compatible = "arm,dmc-520", }, + { /* end of table */ } +}; + +MODULE_DEVICE_TABLE(of, dmc520_edac_driver_id); + +static struct platform_driver dmc520_edac_driver = { + .driver = { + .name = "dmc520", + .of_match_table = dmc520_edac_driver_id, + }, + + .probe = dmc520_edac_probe, + .remove = dmc520_edac_remove +}; + +module_platform_driver(dmc520_edac_driver); + +MODULE_AUTHOR("Rui Zhao <ruizhao@microsoft.com>"); +MODULE_AUTHOR("Lei Wang <lewan@microsoft.com>"); +MODULE_AUTHOR("Shiping Ji <shji@microsoft.com>"); +MODULE_DESCRIPTION("DMC-520 ECC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c new file mode 100644 index 000000000..ac7c9b42d --- /dev/null +++ b/drivers/edac/e752x_edac.c @@ -0,0 +1,1481 @@ +/* + * Intel e752x Memory Controller kernel module + * (C) 2004 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Implement support for the e7520, E7525, e7320 and i3100 memory controllers. + * + * Datasheets: + * https://www.intel.in/content/www/in/en/chipsets/e7525-memory-controller-hub-datasheet.html + * ftp://download.intel.com/design/intarch/datashts/31345803.pdf + * + * Written by Tom Zimmerman + * + * Contributors: + * Thayne Harbaugh at realmsys.com (?) + * Wang Zhenyu at intel.com + * Dave Jiang at mvista.com + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "e752x_edac" + +static int report_non_memory_errors; +static int force_function_unhide; +static int sysbus_parity = -1; + +static struct edac_pci_ctl_info *e752x_pci; + +#define e752x_printk(level, fmt, arg...) \ + edac_printk(level, "e752x", fmt, ##arg) + +#define e752x_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "e752x", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_7520_0 +#define PCI_DEVICE_ID_INTEL_7520_0 0x3590 +#endif /* PCI_DEVICE_ID_INTEL_7520_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR +#define PCI_DEVICE_ID_INTEL_7520_1_ERR 0x3591 +#endif /* PCI_DEVICE_ID_INTEL_7520_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7525_0 +#define PCI_DEVICE_ID_INTEL_7525_0 0x359E +#endif /* PCI_DEVICE_ID_INTEL_7525_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR +#define PCI_DEVICE_ID_INTEL_7525_1_ERR 0x3593 +#endif /* PCI_DEVICE_ID_INTEL_7525_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7320_0 +#define PCI_DEVICE_ID_INTEL_7320_0 0x3592 +#endif /* PCI_DEVICE_ID_INTEL_7320_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR +#define PCI_DEVICE_ID_INTEL_7320_1_ERR 0x3593 +#endif /* PCI_DEVICE_ID_INTEL_7320_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_3100_0 +#define PCI_DEVICE_ID_INTEL_3100_0 0x35B0 +#endif /* PCI_DEVICE_ID_INTEL_3100_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_3100_1_ERR +#define PCI_DEVICE_ID_INTEL_3100_1_ERR 0x35B1 +#endif /* PCI_DEVICE_ID_INTEL_3100_1_ERR */ + +#define E752X_NR_CSROWS 8 /* number of csrows */ + +/* E752X register addresses - device 0 function 0 */ +#define E752X_MCHSCRB 0x52 /* Memory Scrub register (16b) */ + /* + * 6:5 Scrub Completion Count + * 3:2 Scrub Rate (i3100 only) + * 01=fast 10=normal + * 1:0 Scrub Mode enable + * 00=off 10=on + */ +#define E752X_DRB 0x60 /* DRAM row boundary register (8b) */ +#define E752X_DRA 0x70 /* DRAM row attribute register (8b) */ + /* + * 31:30 Device width row 7 + * 01=x8 10=x4 11=x8 DDR2 + * 27:26 Device width row 6 + * 23:22 Device width row 5 + * 19:20 Device width row 4 + * 15:14 Device width row 3 + * 11:10 Device width row 2 + * 7:6 Device width row 1 + * 3:2 Device width row 0 + */ +#define E752X_DRC 0x7C /* DRAM controller mode reg (32b) */ + /* FIXME:IS THIS RIGHT? */ + /* + * 22 Number channels 0=1,1=2 + * 19:18 DRB Granularity 32/64MB + */ +#define E752X_DRM 0x80 /* Dimm mapping register */ +#define E752X_DDRCSR 0x9A /* DDR control and status reg (16b) */ + /* + * 14:12 1 single A, 2 single B, 3 dual + */ +#define E752X_TOLM 0xC4 /* DRAM top of low memory reg (16b) */ +#define E752X_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */ +#define E752X_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */ +#define E752X_REMAPOFFSET 0xCA /* DRAM remap limit offset reg (16b) */ + +/* E752X register addresses - device 0 function 1 */ +#define E752X_FERR_GLOBAL 0x40 /* Global first error register (32b) */ +#define E752X_NERR_GLOBAL 0x44 /* Global next error register (32b) */ +#define E752X_HI_FERR 0x50 /* Hub interface first error reg (8b) */ +#define E752X_HI_NERR 0x52 /* Hub interface next error reg (8b) */ +#define E752X_HI_ERRMASK 0x54 /* Hub interface error mask reg (8b) */ +#define E752X_HI_SMICMD 0x5A /* Hub interface SMI command reg (8b) */ +#define E752X_SYSBUS_FERR 0x60 /* System buss first error reg (16b) */ +#define E752X_SYSBUS_NERR 0x62 /* System buss next error reg (16b) */ +#define E752X_SYSBUS_ERRMASK 0x64 /* System buss error mask reg (16b) */ +#define E752X_SYSBUS_SMICMD 0x6A /* System buss SMI command reg (16b) */ +#define E752X_BUF_FERR 0x70 /* Memory buffer first error reg (8b) */ +#define E752X_BUF_NERR 0x72 /* Memory buffer next error reg (8b) */ +#define E752X_BUF_ERRMASK 0x74 /* Memory buffer error mask reg (8b) */ +#define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI cmd reg (8b) */ +#define E752X_DRAM_FERR 0x80 /* DRAM first error register (16b) */ +#define E752X_DRAM_NERR 0x82 /* DRAM next error register (16b) */ +#define E752X_DRAM_ERRMASK 0x84 /* DRAM error mask register (8b) */ +#define E752X_DRAM_SMICMD 0x8A /* DRAM SMI command register (8b) */ +#define E752X_DRAM_RETR_ADD 0xAC /* DRAM Retry address register (32b) */ +#define E752X_DRAM_SEC1_ADD 0xA0 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6 + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SEC2_ADD 0xC8 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_DED_ADD 0xA4 /* DRAM first uncorrectable memory */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6) + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM 1st uncorrectable scrub mem */ + /* error address register (32b) */ + /* + * 31 Reserved + * 30:2 CE address (64 byte block 34:6 + * 1 Reserved + * 0 HiLoCS + */ +#define E752X_DRAM_SEC1_SYNDROME 0xC4 /* DRAM first correctable memory */ + /* error syndrome register (16b) */ +#define E752X_DRAM_SEC2_SYNDROME 0xC6 /* DRAM second correctable memory */ + /* error syndrome register (16b) */ +#define E752X_DEVPRES1 0xF4 /* Device Present 1 register (8b) */ + +/* 3100 IMCH specific register addresses - device 0 function 1 */ +#define I3100_NSI_FERR 0x48 /* NSI first error reg (32b) */ +#define I3100_NSI_NERR 0x4C /* NSI next error reg (32b) */ +#define I3100_NSI_SMICMD 0x54 /* NSI SMI command register (32b) */ +#define I3100_NSI_EMASK 0x90 /* NSI error mask register (32b) */ + +/* ICH5R register addresses - device 30 function 0 */ +#define ICH5R_PCI_STAT 0x06 /* PCI status register (16b) */ +#define ICH5R_PCI_2ND_STAT 0x1E /* PCI status secondary reg (16b) */ +#define ICH5R_PCI_BRIDGE_CTL 0x3E /* PCI bridge control register (16b) */ + +enum e752x_chips { + E7520 = 0, + E7525 = 1, + E7320 = 2, + I3100 = 3 +}; + +/* + * Those chips Support single-rank and dual-rank memories only. + * + * On e752x chips, the odd rows are present only on dual-rank memories. + * Dividing the rank by two will provide the dimm# + * + * i3100 MC has a different mapping: it supports only 4 ranks. + * + * The mapping is (from 1 to n): + * slot single-ranked double-ranked + * dimm #1 -> rank #4 NA + * dimm #2 -> rank #3 NA + * dimm #3 -> rank #2 Ranks 2 and 3 + * dimm #4 -> rank $1 Ranks 1 and 4 + * + * FIXME: The current mapping for i3100 considers that it supports up to 8 + * ranks/chanel, but datasheet says that the MC supports only 4 ranks. + */ + +struct e752x_pvt { + struct pci_dev *dev_d0f0; + struct pci_dev *dev_d0f1; + u32 tolm; + u32 remapbase; + u32 remaplimit; + int mc_symmetric; + u8 map[8]; + int map_type; + const struct e752x_dev_info *dev_info; +}; + +struct e752x_dev_info { + u16 err_dev; + u16 ctl_dev; + const char *ctl_name; +}; + +struct e752x_error_info { + u32 ferr_global; + u32 nerr_global; + u32 nsi_ferr; /* 3100 only */ + u32 nsi_nerr; /* 3100 only */ + u8 hi_ferr; /* all but 3100 */ + u8 hi_nerr; /* all but 3100 */ + u16 sysbus_ferr; + u16 sysbus_nerr; + u8 buf_ferr; + u8 buf_nerr; + u16 dram_ferr; + u16 dram_nerr; + u32 dram_sec1_add; + u32 dram_sec2_add; + u16 dram_sec1_syndrome; + u16 dram_sec2_syndrome; + u32 dram_ded_add; + u32 dram_scrb_add; + u32 dram_retr_add; +}; + +static const struct e752x_dev_info e752x_devs[] = { + [E7520] = { + .err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR, + .ctl_dev = PCI_DEVICE_ID_INTEL_7520_0, + .ctl_name = "E7520"}, + [E7525] = { + .err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR, + .ctl_dev = PCI_DEVICE_ID_INTEL_7525_0, + .ctl_name = "E7525"}, + [E7320] = { + .err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR, + .ctl_dev = PCI_DEVICE_ID_INTEL_7320_0, + .ctl_name = "E7320"}, + [I3100] = { + .err_dev = PCI_DEVICE_ID_INTEL_3100_1_ERR, + .ctl_dev = PCI_DEVICE_ID_INTEL_3100_0, + .ctl_name = "3100"}, +}; + +/* Valid scrub rates for the e752x/3100 hardware memory scrubber. We + * map the scrubbing bandwidth to a hardware register value. The 'set' + * operation finds the 'matching or higher value'. Note that scrubbing + * on the e752x can only be enabled/disabled. The 3100 supports + * a normal and fast mode. + */ + +#define SDRATE_EOT 0xFFFFFFFF + +struct scrubrate { + u32 bandwidth; /* bandwidth consumed by scrubbing in bytes/sec */ + u16 scrubval; /* register value for scrub rate */ +}; + +/* Rate below assumes same performance as i3100 using PC3200 DDR2 in + * normal mode. e752x bridges don't support choosing normal or fast mode, + * so the scrubbing bandwidth value isn't all that important - scrubbing is + * either on or off. + */ +static const struct scrubrate scrubrates_e752x[] = { + {0, 0x00}, /* Scrubbing Off */ + {500000, 0x02}, /* Scrubbing On */ + {SDRATE_EOT, 0x00} /* End of Table */ +}; + +/* Fast mode: 2 GByte PC3200 DDR2 scrubbed in 33s = 63161283 bytes/s + * Normal mode: 125 (32000 / 256) times slower than fast mode. + */ +static const struct scrubrate scrubrates_i3100[] = { + {0, 0x00}, /* Scrubbing Off */ + {500000, 0x0a}, /* Normal mode - 32k clocks */ + {62500000, 0x06}, /* Fast mode - 256 clocks */ + {SDRATE_EOT, 0x00} /* End of Table */ +}; + +static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci, + unsigned long page) +{ + u32 remap; + struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info; + + edac_dbg(3, "\n"); + + if (page < pvt->tolm) + return page; + + if ((page >= 0x100000) && (page < pvt->remapbase)) + return page; + + remap = (page - pvt->tolm) + pvt->remapbase; + + if (remap < pvt->remaplimit) + return remap; + + e752x_printk(KERN_ERR, "Invalid page %lx - out of range\n", page); + return pvt->tolm - 1; +} + +static void do_process_ce(struct mem_ctl_info *mci, u16 error_one, + u32 sec1_add, u16 sec1_syndrome) +{ + u32 page; + int row; + int channel; + int i; + struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info; + + edac_dbg(3, "\n"); + + /* convert the addr to 4k page */ + page = sec1_add >> (PAGE_SHIFT - 4); + + /* FIXME - check for -1 */ + if (pvt->mc_symmetric) { + /* chip select are bits 14 & 13 */ + row = ((page >> 1) & 3); + e752x_printk(KERN_WARNING, + "Test row %d Table %d %d %d %d %d %d %d %d\n", row, + pvt->map[0], pvt->map[1], pvt->map[2], pvt->map[3], + pvt->map[4], pvt->map[5], pvt->map[6], + pvt->map[7]); + + /* test for channel remapping */ + for (i = 0; i < 8; i++) { + if (pvt->map[i] == row) + break; + } + + e752x_printk(KERN_WARNING, "Test computed row %d\n", i); + + if (i < 8) + row = i; + else + e752x_mc_printk(mci, KERN_WARNING, + "row %d not found in remap table\n", + row); + } else + row = edac_mc_find_csrow_by_page(mci, page); + + /* 0 = channel A, 1 = channel B */ + channel = !(error_one & 1); + + /* e752x mc reads 34:6 of the DRAM linear address */ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + page, offset_in_page(sec1_add << 4), sec1_syndrome, + row, channel, -1, + "e752x CE", ""); +} + +static inline void process_ce(struct mem_ctl_info *mci, u16 error_one, + u32 sec1_add, u16 sec1_syndrome, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ce(mci, error_one, sec1_add, sec1_syndrome); +} + +static void do_process_ue(struct mem_ctl_info *mci, u16 error_one, + u32 ded_add, u32 scrb_add) +{ + u32 error_2b, block_page; + int row; + struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info; + + edac_dbg(3, "\n"); + + if (error_one & 0x0202) { + error_2b = ded_add; + + /* convert to 4k address */ + block_page = error_2b >> (PAGE_SHIFT - 4); + + row = pvt->mc_symmetric ? + /* chip select are bits 14 & 13 */ + ((block_page >> 1) & 3) : + edac_mc_find_csrow_by_page(mci, block_page); + + /* e752x mc reads 34:6 of the DRAM linear address */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + block_page, + offset_in_page(error_2b << 4), 0, + row, -1, -1, + "e752x UE from Read", ""); + + } + if (error_one & 0x0404) { + error_2b = scrb_add; + + /* convert to 4k address */ + block_page = error_2b >> (PAGE_SHIFT - 4); + + row = pvt->mc_symmetric ? + /* chip select are bits 14 & 13 */ + ((block_page >> 1) & 3) : + edac_mc_find_csrow_by_page(mci, block_page); + + /* e752x mc reads 34:6 of the DRAM linear address */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + block_page, + offset_in_page(error_2b << 4), 0, + row, -1, -1, + "e752x UE from Scruber", ""); + } +} + +static inline void process_ue(struct mem_ctl_info *mci, u16 error_one, + u32 ded_add, u32 scrb_add, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ue(mci, error_one, ded_add, scrb_add); +} + +static inline void process_ue_no_info_wr(struct mem_ctl_info *mci, + int *error_found, int handle_error) +{ + *error_found = 1; + + if (!handle_error) + return; + + edac_dbg(3, "\n"); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, + "e752x UE log memory write", ""); +} + +static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error, + u32 retry_add) +{ + u32 error_1b, page; + int row; + struct e752x_pvt *pvt = (struct e752x_pvt *)mci->pvt_info; + + error_1b = retry_add; + page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */ + + /* chip select are bits 14 & 13 */ + row = pvt->mc_symmetric ? ((page >> 1) & 3) : + edac_mc_find_csrow_by_page(mci, page); + + e752x_mc_printk(mci, KERN_WARNING, + "CE page 0x%lx, row %d : Memory read retry\n", + (long unsigned int)page, row); +} + +static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error, + u32 retry_add, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_process_ded_retry(mci, error, retry_add); +} + +static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error, + int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + e752x_mc_printk(mci, KERN_WARNING, "Memory threshold CE\n"); +} + +static char *global_message[11] = { + "PCI Express C1", + "PCI Express C", + "PCI Express B1", + "PCI Express B", + "PCI Express A1", + "PCI Express A", + "DMA Controller", + "HUB or NS Interface", + "System Bus", + "DRAM Controller", /* 9th entry */ + "Internal Buffer" +}; + +#define DRAM_ENTRY 9 + +static char *fatal_message[2] = { "Non-Fatal ", "Fatal " }; + +static void do_global_error(int fatal, u32 errors) +{ + int i; + + for (i = 0; i < 11; i++) { + if (errors & (1 << i)) { + /* If the error is from DRAM Controller OR + * we are to report ALL errors, then + * report the error + */ + if ((i == DRAM_ENTRY) || report_non_memory_errors) + e752x_printk(KERN_WARNING, "%sError %s\n", + fatal_message[fatal], + global_message[i]); + } + } +} + +static inline void global_error(int fatal, u32 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_global_error(fatal, errors); +} + +static char *hub_message[7] = { + "HI Address or Command Parity", "HI Illegal Access", + "HI Internal Parity", "Out of Range Access", + "HI Data Parity", "Enhanced Config Access", + "Hub Interface Target Abort" +}; + +static void do_hub_error(int fatal, u8 errors) +{ + int i; + + for (i = 0; i < 7; i++) { + if (errors & (1 << i)) + e752x_printk(KERN_WARNING, "%sError %s\n", + fatal_message[fatal], hub_message[i]); + } +} + +static inline void hub_error(int fatal, u8 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_hub_error(fatal, errors); +} + +#define NSI_FATAL_MASK 0x0c080081 +#define NSI_NON_FATAL_MASK 0x23a0ba64 +#define NSI_ERR_MASK (NSI_FATAL_MASK | NSI_NON_FATAL_MASK) + +static char *nsi_message[30] = { + "NSI Link Down", /* NSI_FERR/NSI_NERR bit 0, fatal error */ + "", /* reserved */ + "NSI Parity Error", /* bit 2, non-fatal */ + "", /* reserved */ + "", /* reserved */ + "Correctable Error Message", /* bit 5, non-fatal */ + "Non-Fatal Error Message", /* bit 6, non-fatal */ + "Fatal Error Message", /* bit 7, fatal */ + "", /* reserved */ + "Receiver Error", /* bit 9, non-fatal */ + "", /* reserved */ + "Bad TLP", /* bit 11, non-fatal */ + "Bad DLLP", /* bit 12, non-fatal */ + "REPLAY_NUM Rollover", /* bit 13, non-fatal */ + "", /* reserved */ + "Replay Timer Timeout", /* bit 15, non-fatal */ + "", /* reserved */ + "", /* reserved */ + "", /* reserved */ + "Data Link Protocol Error", /* bit 19, fatal */ + "", /* reserved */ + "Poisoned TLP", /* bit 21, non-fatal */ + "", /* reserved */ + "Completion Timeout", /* bit 23, non-fatal */ + "Completer Abort", /* bit 24, non-fatal */ + "Unexpected Completion", /* bit 25, non-fatal */ + "Receiver Overflow", /* bit 26, fatal */ + "Malformed TLP", /* bit 27, fatal */ + "", /* reserved */ + "Unsupported Request" /* bit 29, non-fatal */ +}; + +static void do_nsi_error(int fatal, u32 errors) +{ + int i; + + for (i = 0; i < 30; i++) { + if (errors & (1 << i)) + printk(KERN_WARNING "%sError %s\n", + fatal_message[fatal], nsi_message[i]); + } +} + +static inline void nsi_error(int fatal, u32 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_nsi_error(fatal, errors); +} + +static char *membuf_message[4] = { + "Internal PMWB to DRAM parity", + "Internal PMWB to System Bus Parity", + "Internal System Bus or IO to PMWB Parity", + "Internal DRAM to PMWB Parity" +}; + +static void do_membuf_error(u8 errors) +{ + int i; + + for (i = 0; i < 4; i++) { + if (errors & (1 << i)) + e752x_printk(KERN_WARNING, "Non-Fatal Error %s\n", + membuf_message[i]); + } +} + +static inline void membuf_error(u8 errors, int *error_found, int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_membuf_error(errors); +} + +static char *sysbus_message[10] = { + "Addr or Request Parity", + "Data Strobe Glitch", + "Addr Strobe Glitch", + "Data Parity", + "Addr Above TOM", + "Non DRAM Lock Error", + "MCERR", "BINIT", + "Memory Parity", + "IO Subsystem Parity" +}; + +static void do_sysbus_error(int fatal, u32 errors) +{ + int i; + + for (i = 0; i < 10; i++) { + if (errors & (1 << i)) + e752x_printk(KERN_WARNING, "%sError System Bus %s\n", + fatal_message[fatal], sysbus_message[i]); + } +} + +static inline void sysbus_error(int fatal, u32 errors, int *error_found, + int handle_error) +{ + *error_found = 1; + + if (handle_error) + do_sysbus_error(fatal, errors); +} + +static void e752x_check_hub_interface(struct e752x_error_info *info, + int *error_found, int handle_error) +{ + u8 stat8; + + //pci_read_config_byte(dev,E752X_HI_FERR,&stat8); + + stat8 = info->hi_ferr; + + if (stat8 & 0x7f) { /* Error, so process */ + stat8 &= 0x7f; + + if (stat8 & 0x2b) + hub_error(1, stat8 & 0x2b, error_found, handle_error); + + if (stat8 & 0x54) + hub_error(0, stat8 & 0x54, error_found, handle_error); + } + //pci_read_config_byte(dev,E752X_HI_NERR,&stat8); + + stat8 = info->hi_nerr; + + if (stat8 & 0x7f) { /* Error, so process */ + stat8 &= 0x7f; + + if (stat8 & 0x2b) + hub_error(1, stat8 & 0x2b, error_found, handle_error); + + if (stat8 & 0x54) + hub_error(0, stat8 & 0x54, error_found, handle_error); + } +} + +static void e752x_check_ns_interface(struct e752x_error_info *info, + int *error_found, int handle_error) +{ + u32 stat32; + + stat32 = info->nsi_ferr; + if (stat32 & NSI_ERR_MASK) { /* Error, so process */ + if (stat32 & NSI_FATAL_MASK) /* check for fatal errors */ + nsi_error(1, stat32 & NSI_FATAL_MASK, error_found, + handle_error); + if (stat32 & NSI_NON_FATAL_MASK) /* check for non-fatal ones */ + nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found, + handle_error); + } + stat32 = info->nsi_nerr; + if (stat32 & NSI_ERR_MASK) { + if (stat32 & NSI_FATAL_MASK) + nsi_error(1, stat32 & NSI_FATAL_MASK, error_found, + handle_error); + if (stat32 & NSI_NON_FATAL_MASK) + nsi_error(0, stat32 & NSI_NON_FATAL_MASK, error_found, + handle_error); + } +} + +static void e752x_check_sysbus(struct e752x_error_info *info, + int *error_found, int handle_error) +{ + u32 stat32, error32; + + //pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32); + stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16); + + if (stat32 == 0) + return; /* no errors */ + + error32 = (stat32 >> 16) & 0x3ff; + stat32 = stat32 & 0x3ff; + + if (stat32 & 0x087) + sysbus_error(1, stat32 & 0x087, error_found, handle_error); + + if (stat32 & 0x378) + sysbus_error(0, stat32 & 0x378, error_found, handle_error); + + if (error32 & 0x087) + sysbus_error(1, error32 & 0x087, error_found, handle_error); + + if (error32 & 0x378) + sysbus_error(0, error32 & 0x378, error_found, handle_error); +} + +static void e752x_check_membuf(struct e752x_error_info *info, + int *error_found, int handle_error) +{ + u8 stat8; + + stat8 = info->buf_ferr; + + if (stat8 & 0x0f) { /* Error, so process */ + stat8 &= 0x0f; + membuf_error(stat8, error_found, handle_error); + } + + stat8 = info->buf_nerr; + + if (stat8 & 0x0f) { /* Error, so process */ + stat8 &= 0x0f; + membuf_error(stat8, error_found, handle_error); + } +} + +static void e752x_check_dram(struct mem_ctl_info *mci, + struct e752x_error_info *info, int *error_found, + int handle_error) +{ + u16 error_one, error_next; + + error_one = info->dram_ferr; + error_next = info->dram_nerr; + + /* decode and report errors */ + if (error_one & 0x0101) /* check first error correctable */ + process_ce(mci, error_one, info->dram_sec1_add, + info->dram_sec1_syndrome, error_found, handle_error); + + if (error_next & 0x0101) /* check next error correctable */ + process_ce(mci, error_next, info->dram_sec2_add, + info->dram_sec2_syndrome, error_found, handle_error); + + if (error_one & 0x4040) + process_ue_no_info_wr(mci, error_found, handle_error); + + if (error_next & 0x4040) + process_ue_no_info_wr(mci, error_found, handle_error); + + if (error_one & 0x2020) + process_ded_retry(mci, error_one, info->dram_retr_add, + error_found, handle_error); + + if (error_next & 0x2020) + process_ded_retry(mci, error_next, info->dram_retr_add, + error_found, handle_error); + + if (error_one & 0x0808) + process_threshold_ce(mci, error_one, error_found, handle_error); + + if (error_next & 0x0808) + process_threshold_ce(mci, error_next, error_found, + handle_error); + + if (error_one & 0x0606) + process_ue(mci, error_one, info->dram_ded_add, + info->dram_scrb_add, error_found, handle_error); + + if (error_next & 0x0606) + process_ue(mci, error_next, info->dram_ded_add, + info->dram_scrb_add, error_found, handle_error); +} + +static void e752x_get_error_info(struct mem_ctl_info *mci, + struct e752x_error_info *info) +{ + struct pci_dev *dev; + struct e752x_pvt *pvt; + + memset(info, 0, sizeof(*info)); + pvt = (struct e752x_pvt *)mci->pvt_info; + dev = pvt->dev_d0f1; + pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global); + + if (info->ferr_global) { + if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) { + pci_read_config_dword(dev, I3100_NSI_FERR, + &info->nsi_ferr); + info->hi_ferr = 0; + } else { + pci_read_config_byte(dev, E752X_HI_FERR, + &info->hi_ferr); + info->nsi_ferr = 0; + } + pci_read_config_word(dev, E752X_SYSBUS_FERR, + &info->sysbus_ferr); + pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr); + pci_read_config_word(dev, E752X_DRAM_FERR, &info->dram_ferr); + pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD, + &info->dram_sec1_add); + pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME, + &info->dram_sec1_syndrome); + pci_read_config_dword(dev, E752X_DRAM_DED_ADD, + &info->dram_ded_add); + pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD, + &info->dram_scrb_add); + pci_read_config_dword(dev, E752X_DRAM_RETR_ADD, + &info->dram_retr_add); + + /* ignore the reserved bits just in case */ + if (info->hi_ferr & 0x7f) + pci_write_config_byte(dev, E752X_HI_FERR, + info->hi_ferr); + + if (info->nsi_ferr & NSI_ERR_MASK) + pci_write_config_dword(dev, I3100_NSI_FERR, + info->nsi_ferr); + + if (info->sysbus_ferr) + pci_write_config_word(dev, E752X_SYSBUS_FERR, + info->sysbus_ferr); + + if (info->buf_ferr & 0x0f) + pci_write_config_byte(dev, E752X_BUF_FERR, + info->buf_ferr); + + if (info->dram_ferr) + pci_write_bits16(pvt->dev_d0f1, E752X_DRAM_FERR, + info->dram_ferr, info->dram_ferr); + + pci_write_config_dword(dev, E752X_FERR_GLOBAL, + info->ferr_global); + } + + pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global); + + if (info->nerr_global) { + if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) { + pci_read_config_dword(dev, I3100_NSI_NERR, + &info->nsi_nerr); + info->hi_nerr = 0; + } else { + pci_read_config_byte(dev, E752X_HI_NERR, + &info->hi_nerr); + info->nsi_nerr = 0; + } + pci_read_config_word(dev, E752X_SYSBUS_NERR, + &info->sysbus_nerr); + pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr); + pci_read_config_word(dev, E752X_DRAM_NERR, &info->dram_nerr); + pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD, + &info->dram_sec2_add); + pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME, + &info->dram_sec2_syndrome); + + if (info->hi_nerr & 0x7f) + pci_write_config_byte(dev, E752X_HI_NERR, + info->hi_nerr); + + if (info->nsi_nerr & NSI_ERR_MASK) + pci_write_config_dword(dev, I3100_NSI_NERR, + info->nsi_nerr); + + if (info->sysbus_nerr) + pci_write_config_word(dev, E752X_SYSBUS_NERR, + info->sysbus_nerr); + + if (info->buf_nerr & 0x0f) + pci_write_config_byte(dev, E752X_BUF_NERR, + info->buf_nerr); + + if (info->dram_nerr) + pci_write_bits16(pvt->dev_d0f1, E752X_DRAM_NERR, + info->dram_nerr, info->dram_nerr); + + pci_write_config_dword(dev, E752X_NERR_GLOBAL, + info->nerr_global); + } +} + +static int e752x_process_error_info(struct mem_ctl_info *mci, + struct e752x_error_info *info, + int handle_errors) +{ + u32 error32, stat32; + int error_found; + + error_found = 0; + error32 = (info->ferr_global >> 18) & 0x3ff; + stat32 = (info->ferr_global >> 4) & 0x7ff; + + if (error32) + global_error(1, error32, &error_found, handle_errors); + + if (stat32) + global_error(0, stat32, &error_found, handle_errors); + + error32 = (info->nerr_global >> 18) & 0x3ff; + stat32 = (info->nerr_global >> 4) & 0x7ff; + + if (error32) + global_error(1, error32, &error_found, handle_errors); + + if (stat32) + global_error(0, stat32, &error_found, handle_errors); + + e752x_check_hub_interface(info, &error_found, handle_errors); + e752x_check_ns_interface(info, &error_found, handle_errors); + e752x_check_sysbus(info, &error_found, handle_errors); + e752x_check_membuf(info, &error_found, handle_errors); + e752x_check_dram(mci, info, &error_found, handle_errors); + return error_found; +} + +static void e752x_check(struct mem_ctl_info *mci) +{ + struct e752x_error_info info; + + e752x_get_error_info(mci, &info); + e752x_process_error_info(mci, &info, 1); +} + +/* Program byte/sec bandwidth scrub rate to hardware */ +static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) +{ + const struct scrubrate *scrubrates; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + struct pci_dev *pdev = pvt->dev_d0f0; + int i; + + if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0) + scrubrates = scrubrates_i3100; + else + scrubrates = scrubrates_e752x; + + /* Translate the desired scrub rate to a e752x/3100 register value. + * Search for the bandwidth that is equal or greater than the + * desired rate and program the cooresponding register value. + */ + for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++) + if (scrubrates[i].bandwidth >= new_bw) + break; + + if (scrubrates[i].bandwidth == SDRATE_EOT) + return -1; + + pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval); + + return scrubrates[i].bandwidth; +} + +/* Convert current scrub rate value into byte/sec bandwidth */ +static int get_sdram_scrub_rate(struct mem_ctl_info *mci) +{ + const struct scrubrate *scrubrates; + struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; + struct pci_dev *pdev = pvt->dev_d0f0; + u16 scrubval; + int i; + + if (pvt->dev_info->ctl_dev == PCI_DEVICE_ID_INTEL_3100_0) + scrubrates = scrubrates_i3100; + else + scrubrates = scrubrates_e752x; + + /* Find the bandwidth matching the memory scrubber configuration */ + pci_read_config_word(pdev, E752X_MCHSCRB, &scrubval); + scrubval = scrubval & 0x0f; + + for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++) + if (scrubrates[i].scrubval == scrubval) + break; + + if (scrubrates[i].bandwidth == SDRATE_EOT) { + e752x_printk(KERN_WARNING, + "Invalid sdram scrub control value: 0x%x\n", scrubval); + return -1; + } + return scrubrates[i].bandwidth; + +} + +/* Return 1 if dual channel mode is active. Else return 0. */ +static inline int dual_channel_active(u16 ddrcsr) +{ + return (((ddrcsr >> 12) & 3) == 3); +} + +/* Remap csrow index numbers if map_type is "reverse" + */ +static inline int remap_csrow_index(struct mem_ctl_info *mci, int index) +{ + struct e752x_pvt *pvt = mci->pvt_info; + + if (!pvt->map_type) + return (7 - index); + + return (index); +} + +static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, + u16 ddrcsr) +{ + struct csrow_info *csrow; + enum edac_type edac_mode; + unsigned long last_cumul_size; + int index, mem_dev, drc_chan; + int drc_drbg; /* DRB granularity 0=64mb, 1=128mb */ + int drc_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */ + u8 value; + u32 dra, drc, cumul_size, i, nr_pages; + + dra = 0; + for (index = 0; index < 4; index++) { + u8 dra_reg; + pci_read_config_byte(pdev, E752X_DRA + index, &dra_reg); + dra |= dra_reg << (index * 8); + } + pci_read_config_dword(pdev, E752X_DRC, &drc); + drc_chan = dual_channel_active(ddrcsr) ? 1 : 0; + drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */ + drc_ddim = (drc >> 20) & 0x3; + + /* The dram row boundary (DRB) reg values are boundary address for + * each DRAM row with a granularity of 64 or 128MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { + /* mem_dev 0=x8, 1=x4 */ + mem_dev = (dra >> (index * 4 + 2)) & 0x3; + csrow = mci->csrows[remap_csrow_index(mci, index)]; + + mem_dev = (mem_dev == 2); + pci_read_config_byte(pdev, E752X_DRB + index, &value); + /* convert a 128 or 64 MiB DRB to a page size. */ + cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + + /* + * if single channel or x8 devices then SECDED + * if dual channel and x4 then S4ECD4ED + */ + if (drc_ddim) { + if (drc_chan && mem_dev) { + edac_mode = EDAC_S4ECD4ED; + mci->edac_cap |= EDAC_FLAG_S4ECD4ED; + } else { + edac_mode = EDAC_SECDED; + mci->edac_cap |= EDAC_FLAG_SECDED; + } + } else + edac_mode = EDAC_NONE; + for (i = 0; i < csrow->nr_channels; i++) { + struct dimm_info *dimm = csrow->channels[i]->dimm; + + edac_dbg(3, "Initializing rank at (%i,%i)\n", index, i); + dimm->nr_pages = nr_pages / csrow->nr_channels; + dimm->grain = 1 << 12; /* 4KiB - resolution of CELOG */ + dimm->mtype = MEM_RDDR; /* only one type supported */ + dimm->dtype = mem_dev ? DEV_X4 : DEV_X8; + dimm->edac_mode = edac_mode; + } + } +} + +static void e752x_init_mem_map_table(struct pci_dev *pdev, + struct e752x_pvt *pvt) +{ + int index; + u8 value, last, row; + + last = 0; + row = 0; + + for (index = 0; index < 8; index += 2) { + pci_read_config_byte(pdev, E752X_DRB + index, &value); + /* test if there is a dimm in this slot */ + if (value == last) { + /* no dimm in the slot, so flag it as empty */ + pvt->map[index] = 0xff; + pvt->map[index + 1] = 0xff; + } else { /* there is a dimm in the slot */ + pvt->map[index] = row; + row++; + last = value; + /* test the next value to see if the dimm is double + * sided + */ + pci_read_config_byte(pdev, E752X_DRB + index + 1, + &value); + + /* the dimm is single sided, so flag as empty */ + /* this is a double sided dimm to save the next row #*/ + pvt->map[index + 1] = (value == last) ? 0xff : row; + row++; + last = value; + } + } +} + +/* Return 0 on success or 1 on failure. */ +static int e752x_get_devs(struct pci_dev *pdev, int dev_idx, + struct e752x_pvt *pvt) +{ + pvt->dev_d0f1 = pci_get_device(PCI_VENDOR_ID_INTEL, + pvt->dev_info->err_dev, NULL); + + if (pvt->dev_d0f1 == NULL) { + pvt->dev_d0f1 = pci_scan_single_device(pdev->bus, + PCI_DEVFN(0, 1)); + pci_dev_get(pvt->dev_d0f1); + } + + if (pvt->dev_d0f1 == NULL) { + e752x_printk(KERN_ERR, "error reporting device not found:" + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev); + return 1; + } + + pvt->dev_d0f0 = pci_get_device(PCI_VENDOR_ID_INTEL, + e752x_devs[dev_idx].ctl_dev, + NULL); + + if (pvt->dev_d0f0 == NULL) + goto fail; + + return 0; + +fail: + pci_dev_put(pvt->dev_d0f1); + return 1; +} + +/* Setup system bus parity mask register. + * Sysbus parity supported on: + * e7320/e7520/e7525 + Xeon + */ +static void e752x_init_sysbus_parity_mask(struct e752x_pvt *pvt) +{ + char *cpu_id = cpu_data(0).x86_model_id; + struct pci_dev *dev = pvt->dev_d0f1; + int enable = 1; + + /* Allow module parameter override, else see if CPU supports parity */ + if (sysbus_parity != -1) { + enable = sysbus_parity; + } else if (cpu_id[0] && !strstr(cpu_id, "Xeon")) { + e752x_printk(KERN_INFO, "System Bus Parity not " + "supported by CPU, disabling\n"); + enable = 0; + } + + if (enable) + pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0000); + else + pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x0309); +} + +static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt) +{ + struct pci_dev *dev; + + dev = pvt->dev_d0f1; + /* Turn off error disable & SMI in case the BIOS turned it on */ + if (pvt->dev_info->err_dev == PCI_DEVICE_ID_INTEL_3100_1_ERR) { + pci_write_config_dword(dev, I3100_NSI_EMASK, 0); + pci_write_config_dword(dev, I3100_NSI_SMICMD, 0); + } else { + pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00); + } + + e752x_init_sysbus_parity_mask(pvt); + + pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00); + pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00); + pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00); + pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00); +} + +static int e752x_probe1(struct pci_dev *pdev, int dev_idx) +{ + u16 pci_data; + u8 stat8; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct e752x_pvt *pvt; + u16 ddrcsr; + int drc_chan; /* Number of channels 0=1chan,1=2chan */ + struct e752x_error_info discard; + + edac_dbg(0, "mci\n"); + edac_dbg(0, "Starting Probe1\n"); + + /* check to see if device 0 function 1 is enabled; if it isn't, we + * assume the BIOS has reserved it for a reason and is expecting + * exclusive access, we take care not to violate that assumption and + * fail the probe. */ + pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8); + if (!force_function_unhide && !(stat8 & (1 << 5))) { + printk(KERN_INFO "Contact your BIOS vendor to see if the " + "E752x error registers can be safely un-hidden\n"); + return -ENODEV; + } + stat8 |= (1 << 5); + pci_write_config_byte(pdev, E752X_DEVPRES1, stat8); + + pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr); + /* FIXME: should check >>12 or 0xf, true for all? */ + /* Dual channel = 1, Single channel = 0 */ + drc_chan = dual_channel_active(ddrcsr); + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = E752X_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = drc_chan + 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(3, "init mci\n"); + mci->mtype_cap = MEM_FLAG_RDDR; + /* 3100 IMCH supports SECDEC only */ + mci->edac_ctl_cap = (dev_idx == I3100) ? EDAC_FLAG_SECDED : + (EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED); + /* FIXME - what if different memory types are in different csrows? */ + mci->mod_name = EDAC_MOD_STR; + mci->pdev = &pdev->dev; + + edac_dbg(3, "init pvt\n"); + pvt = (struct e752x_pvt *)mci->pvt_info; + pvt->dev_info = &e752x_devs[dev_idx]; + pvt->mc_symmetric = ((ddrcsr & 0x10) != 0); + + if (e752x_get_devs(pdev, dev_idx, pvt)) { + edac_mc_free(mci); + return -ENODEV; + } + + edac_dbg(3, "more mci init\n"); + mci->ctl_name = pvt->dev_info->ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = e752x_check; + mci->ctl_page_to_phys = ctl_page_to_phys; + mci->set_sdram_scrub_rate = set_sdram_scrub_rate; + mci->get_sdram_scrub_rate = get_sdram_scrub_rate; + + /* set the map type. 1 = normal, 0 = reversed + * Must be set before e752x_init_csrows in case csrow mapping + * is reversed. + */ + pci_read_config_byte(pdev, E752X_DRM, &stat8); + pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f)); + + e752x_init_csrows(mci, pdev, ddrcsr); + e752x_init_mem_map_table(pdev, pvt); + + if (dev_idx == I3100) + mci->edac_cap = EDAC_FLAG_SECDED; /* the only mode supported */ + else + mci->edac_cap |= EDAC_FLAG_NONE; + edac_dbg(3, "tolm, remapbase, remaplimit\n"); + + /* load the top of low memory, remap base, and remap limit vars */ + pci_read_config_word(pdev, E752X_TOLM, &pci_data); + pvt->tolm = ((u32) pci_data) << 4; + pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data); + pvt->remapbase = ((u32) pci_data) << 14; + pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data); + pvt->remaplimit = ((u32) pci_data) << 14; + e752x_printk(KERN_INFO, + "tolm = %x, remapbase = %x, remaplimit = %x\n", + pvt->tolm, pvt->remapbase, pvt->remaplimit); + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail; + } + + e752x_init_error_reporting_regs(pvt); + e752x_get_error_info(mci, &discard); /* clear other MCH errors */ + + /* allocating generic PCI control info */ + e752x_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!e752x_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + return 0; + +fail: + pci_dev_put(pvt->dev_d0f0); + pci_dev_put(pvt->dev_d0f1); + edac_mc_free(mci); + + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int e752x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + edac_dbg(0, "\n"); + + /* wake up and enable device */ + if (pci_enable_device(pdev) < 0) + return -EIO; + + return e752x_probe1(pdev, ent->driver_data); +} + +static void e752x_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct e752x_pvt *pvt; + + edac_dbg(0, "\n"); + + if (e752x_pci) + edac_pci_release_generic_ctl(e752x_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + pvt = (struct e752x_pvt *)mci->pvt_info; + pci_dev_put(pvt->dev_d0f0); + pci_dev_put(pvt->dev_d0f1); + edac_mc_free(mci); +} + +static const struct pci_device_id e752x_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7520}, + { + PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7525}, + { + PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7320}, + { + PCI_VEND_DEV(INTEL, 3100_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I3100}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, e752x_pci_tbl); + +static struct pci_driver e752x_driver = { + .name = EDAC_MOD_STR, + .probe = e752x_init_one, + .remove = e752x_remove_one, + .id_table = e752x_pci_tbl, +}; + +static int __init e752x_init(void) +{ + int pci_rc; + + edac_dbg(3, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&e752x_driver); + return (pci_rc < 0) ? pci_rc : 0; +} + +static void __exit e752x_exit(void) +{ + edac_dbg(3, "\n"); + pci_unregister_driver(&e752x_driver); +} + +module_init(e752x_init); +module_exit(e752x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n"); +MODULE_DESCRIPTION("MC support for Intel e752x/3100 memory controllers"); + +module_param(force_function_unhide, int, 0444); +MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:" + " 1=force unhide and hope BIOS doesn't fight driver for " + "Dev0:Fun1 access"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + +module_param(sysbus_parity, int, 0444); +MODULE_PARM_DESC(sysbus_parity, "0=disable system bus parity checking," + " 1=enable system bus parity checking, default=auto-detect"); +module_param(report_non_memory_errors, int, 0644); +MODULE_PARM_DESC(report_non_memory_errors, "0=disable non-memory error " + "reporting, 1=enable non-memory error reporting"); diff --git a/drivers/edac/e7xxx_edac.c b/drivers/edac/e7xxx_edac.c new file mode 100644 index 000000000..497e710fc --- /dev/null +++ b/drivers/edac/e7xxx_edac.c @@ -0,0 +1,603 @@ +/* + * Intel e7xxx Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * See "enum e7xxx_chips" below for supported chipsets + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * Datasheet: + * http://www.intel.com/content/www/us/en/chipsets/e7501-chipset-memory-controller-hub-datasheet.html + * + * Contributors: + * Eric Biederman (Linux Networx) + * Tom Zimmerman (Linux Networx) + * Jim Garlick (Lawrence Livermore National Labs) + * Dave Peterson (Lawrence Livermore National Labs) + * That One Guy (Some other place) + * Wang Zhenyu (intel.com) + * + * $Id: edac_e7xxx.c,v 1.5.2.9 2005/10/05 00:43:44 dsp_llnl Exp $ + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "e7xxx_edac" + +#define e7xxx_printk(level, fmt, arg...) \ + edac_printk(level, "e7xxx", fmt, ##arg) + +#define e7xxx_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "e7xxx", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_7205_0 +#define PCI_DEVICE_ID_INTEL_7205_0 0x255d +#endif /* PCI_DEVICE_ID_INTEL_7205_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7205_1_ERR +#define PCI_DEVICE_ID_INTEL_7205_1_ERR 0x2551 +#endif /* PCI_DEVICE_ID_INTEL_7205_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7500_0 +#define PCI_DEVICE_ID_INTEL_7500_0 0x2540 +#endif /* PCI_DEVICE_ID_INTEL_7500_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7500_1_ERR +#define PCI_DEVICE_ID_INTEL_7500_1_ERR 0x2541 +#endif /* PCI_DEVICE_ID_INTEL_7500_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7501_0 +#define PCI_DEVICE_ID_INTEL_7501_0 0x254c +#endif /* PCI_DEVICE_ID_INTEL_7501_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7501_1_ERR +#define PCI_DEVICE_ID_INTEL_7501_1_ERR 0x2541 +#endif /* PCI_DEVICE_ID_INTEL_7501_1_ERR */ + +#ifndef PCI_DEVICE_ID_INTEL_7505_0 +#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 +#endif /* PCI_DEVICE_ID_INTEL_7505_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_7505_1_ERR +#define PCI_DEVICE_ID_INTEL_7505_1_ERR 0x2551 +#endif /* PCI_DEVICE_ID_INTEL_7505_1_ERR */ + +#define E7XXX_NR_CSROWS 8 /* number of csrows */ +#define E7XXX_NR_DIMMS 8 /* 2 channels, 4 dimms/channel */ + +/* E7XXX register addresses - device 0 function 0 */ +#define E7XXX_DRB 0x60 /* DRAM row boundary register (8b) */ +#define E7XXX_DRA 0x70 /* DRAM row attribute register (8b) */ + /* + * 31 Device width row 7 0=x8 1=x4 + * 27 Device width row 6 + * 23 Device width row 5 + * 19 Device width row 4 + * 15 Device width row 3 + * 11 Device width row 2 + * 7 Device width row 1 + * 3 Device width row 0 + */ +#define E7XXX_DRC 0x7C /* DRAM controller mode reg (32b) */ + /* + * 22 Number channels 0=1,1=2 + * 19:18 DRB Granularity 32/64MB + */ +#define E7XXX_TOLM 0xC4 /* DRAM top of low memory reg (16b) */ +#define E7XXX_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */ +#define E7XXX_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */ + +/* E7XXX register addresses - device 0 function 1 */ +#define E7XXX_DRAM_FERR 0x80 /* DRAM first error register (8b) */ +#define E7XXX_DRAM_NERR 0x82 /* DRAM next error register (8b) */ +#define E7XXX_DRAM_CELOG_ADD 0xA0 /* DRAM first correctable memory */ + /* error address register (32b) */ + /* + * 31:28 Reserved + * 27:6 CE address (4k block 33:12) + * 5:0 Reserved + */ +#define E7XXX_DRAM_UELOG_ADD 0xB0 /* DRAM first uncorrectable memory */ + /* error address register (32b) */ + /* + * 31:28 Reserved + * 27:6 CE address (4k block 33:12) + * 5:0 Reserved + */ +#define E7XXX_DRAM_CELOG_SYNDROME 0xD0 /* DRAM first correctable memory */ + /* error syndrome register (16b) */ + +enum e7xxx_chips { + E7500 = 0, + E7501, + E7505, + E7205, +}; + +struct e7xxx_pvt { + struct pci_dev *bridge_ck; + u32 tolm; + u32 remapbase; + u32 remaplimit; + const struct e7xxx_dev_info *dev_info; +}; + +struct e7xxx_dev_info { + u16 err_dev; + const char *ctl_name; +}; + +struct e7xxx_error_info { + u8 dram_ferr; + u8 dram_nerr; + u32 dram_celog_add; + u16 dram_celog_syndrome; + u32 dram_uelog_add; +}; + +static struct edac_pci_ctl_info *e7xxx_pci; + +static const struct e7xxx_dev_info e7xxx_devs[] = { + [E7500] = { + .err_dev = PCI_DEVICE_ID_INTEL_7500_1_ERR, + .ctl_name = "E7500"}, + [E7501] = { + .err_dev = PCI_DEVICE_ID_INTEL_7501_1_ERR, + .ctl_name = "E7501"}, + [E7505] = { + .err_dev = PCI_DEVICE_ID_INTEL_7505_1_ERR, + .ctl_name = "E7505"}, + [E7205] = { + .err_dev = PCI_DEVICE_ID_INTEL_7205_1_ERR, + .ctl_name = "E7205"}, +}; + +/* FIXME - is this valid for both SECDED and S4ECD4ED? */ +static inline int e7xxx_find_channel(u16 syndrome) +{ + edac_dbg(3, "\n"); + + if ((syndrome & 0xff00) == 0) + return 0; + + if ((syndrome & 0x00ff) == 0) + return 1; + + if ((syndrome & 0xf000) == 0 || (syndrome & 0x0f00) == 0) + return 0; + + return 1; +} + +static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci, + unsigned long page) +{ + u32 remap; + struct e7xxx_pvt *pvt = (struct e7xxx_pvt *)mci->pvt_info; + + edac_dbg(3, "\n"); + + if ((page < pvt->tolm) || + ((page >= 0x100000) && (page < pvt->remapbase))) + return page; + + remap = (page - pvt->tolm) + pvt->remapbase; + + if (remap < pvt->remaplimit) + return remap; + + e7xxx_printk(KERN_ERR, "Invalid page %lx - out of range\n", page); + return pvt->tolm - 1; +} + +static void process_ce(struct mem_ctl_info *mci, struct e7xxx_error_info *info) +{ + u32 error_1b, page; + u16 syndrome; + int row; + int channel; + + edac_dbg(3, "\n"); + /* read the error address */ + error_1b = info->dram_celog_add; + /* FIXME - should use PAGE_SHIFT */ + page = error_1b >> 6; /* convert the address to 4k page */ + /* read the syndrome */ + syndrome = info->dram_celog_syndrome; + /* FIXME - check for -1 */ + row = edac_mc_find_csrow_by_page(mci, page); + /* convert syndrome to channel */ + channel = e7xxx_find_channel(syndrome); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, page, 0, syndrome, + row, channel, -1, "e7xxx CE", ""); +} + +static void process_ce_no_info(struct mem_ctl_info *mci) +{ + edac_dbg(3, "\n"); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, -1, -1, -1, + "e7xxx CE log register overflow", ""); +} + +static void process_ue(struct mem_ctl_info *mci, struct e7xxx_error_info *info) +{ + u32 error_2b, block_page; + int row; + + edac_dbg(3, "\n"); + /* read the error address */ + error_2b = info->dram_uelog_add; + /* FIXME - should use PAGE_SHIFT */ + block_page = error_2b >> 6; /* convert to 4k address */ + row = edac_mc_find_csrow_by_page(mci, block_page); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, block_page, 0, 0, + row, -1, -1, "e7xxx UE", ""); +} + +static void process_ue_no_info(struct mem_ctl_info *mci) +{ + edac_dbg(3, "\n"); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1, + "e7xxx UE log register overflow", ""); +} + +static void e7xxx_get_error_info(struct mem_ctl_info *mci, + struct e7xxx_error_info *info) +{ + struct e7xxx_pvt *pvt; + + pvt = (struct e7xxx_pvt *)mci->pvt_info; + pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_FERR, &info->dram_ferr); + pci_read_config_byte(pvt->bridge_ck, E7XXX_DRAM_NERR, &info->dram_nerr); + + if ((info->dram_ferr & 1) || (info->dram_nerr & 1)) { + pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_CELOG_ADD, + &info->dram_celog_add); + pci_read_config_word(pvt->bridge_ck, + E7XXX_DRAM_CELOG_SYNDROME, + &info->dram_celog_syndrome); + } + + if ((info->dram_ferr & 2) || (info->dram_nerr & 2)) + pci_read_config_dword(pvt->bridge_ck, E7XXX_DRAM_UELOG_ADD, + &info->dram_uelog_add); + + if (info->dram_ferr & 3) + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_FERR, 0x03, 0x03); + + if (info->dram_nerr & 3) + pci_write_bits8(pvt->bridge_ck, E7XXX_DRAM_NERR, 0x03, 0x03); +} + +static int e7xxx_process_error_info(struct mem_ctl_info *mci, + struct e7xxx_error_info *info, + int handle_errors) +{ + int error_found; + + error_found = 0; + + /* decode and report errors */ + if (info->dram_ferr & 1) { /* check first error correctable */ + error_found = 1; + + if (handle_errors) + process_ce(mci, info); + } + + if (info->dram_ferr & 2) { /* check first error uncorrectable */ + error_found = 1; + + if (handle_errors) + process_ue(mci, info); + } + + if (info->dram_nerr & 1) { /* check next error correctable */ + error_found = 1; + + if (handle_errors) { + if (info->dram_ferr & 1) + process_ce_no_info(mci); + else + process_ce(mci, info); + } + } + + if (info->dram_nerr & 2) { /* check next error uncorrectable */ + error_found = 1; + + if (handle_errors) { + if (info->dram_ferr & 2) + process_ue_no_info(mci); + else + process_ue(mci, info); + } + } + + return error_found; +} + +static void e7xxx_check(struct mem_ctl_info *mci) +{ + struct e7xxx_error_info info; + + e7xxx_get_error_info(mci, &info); + e7xxx_process_error_info(mci, &info, 1); +} + +/* Return 1 if dual channel mode is active. Else return 0. */ +static inline int dual_channel_active(u32 drc, int dev_idx) +{ + return (dev_idx == E7501) ? ((drc >> 22) & 0x1) : 1; +} + +/* Return DRB granularity (0=32mb, 1=64mb). */ +static inline int drb_granularity(u32 drc, int dev_idx) +{ + /* only e7501 can be single channel */ + return (dev_idx == E7501) ? ((drc >> 18) & 0x3) : 1; +} + +static void e7xxx_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, + int dev_idx, u32 drc) +{ + unsigned long last_cumul_size; + int index, j; + u8 value; + u32 dra, cumul_size, nr_pages; + int drc_chan, drc_drbg, drc_ddim, mem_dev; + struct csrow_info *csrow; + struct dimm_info *dimm; + enum edac_type edac_mode; + + pci_read_config_dword(pdev, E7XXX_DRA, &dra); + drc_chan = dual_channel_active(drc, dev_idx); + drc_drbg = drb_granularity(drc, dev_idx); + drc_ddim = (drc >> 20) & 0x3; + last_cumul_size = 0; + + /* The dram row boundary (DRB) reg values are boundary address + * for each DRAM row with a granularity of 32 or 64MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + for (index = 0; index < mci->nr_csrows; index++) { + /* mem_dev 0=x8, 1=x4 */ + mem_dev = (dra >> (index * 4 + 3)) & 0x1; + csrow = mci->csrows[index]; + + pci_read_config_byte(pdev, E7XXX_DRB + index, &value); + /* convert a 64 or 32 MiB DRB to a page size. */ + cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + + /* + * if single channel or x8 devices then SECDED + * if dual channel and x4 then S4ECD4ED + */ + if (drc_ddim) { + if (drc_chan && mem_dev) { + edac_mode = EDAC_S4ECD4ED; + mci->edac_cap |= EDAC_FLAG_S4ECD4ED; + } else { + edac_mode = EDAC_SECDED; + mci->edac_cap |= EDAC_FLAG_SECDED; + } + } else + edac_mode = EDAC_NONE; + + for (j = 0; j < drc_chan + 1; j++) { + dimm = csrow->channels[j]->dimm; + + dimm->nr_pages = nr_pages / (drc_chan + 1); + dimm->grain = 1 << 12; /* 4KiB - resolution of CELOG */ + dimm->mtype = MEM_RDDR; /* only one type supported */ + dimm->dtype = mem_dev ? DEV_X4 : DEV_X8; + dimm->edac_mode = edac_mode; + } + } +} + +static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx) +{ + u16 pci_data; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + struct e7xxx_pvt *pvt = NULL; + u32 drc; + int drc_chan; + struct e7xxx_error_info discard; + + edac_dbg(0, "mci\n"); + + pci_read_config_dword(pdev, E7XXX_DRC, &drc); + + drc_chan = dual_channel_active(drc, dev_idx); + /* + * According with the datasheet, this device has a maximum of + * 4 DIMMS per channel, either single-rank or dual-rank. So, the + * total amount of dimms is 8 (E7XXX_NR_DIMMS). + * That means that the DIMM is mapped as CSROWs, and the channel + * will map the rank. So, an error to either channel should be + * attributed to the same dimm. + */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = E7XXX_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = drc_chan + 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(3, "init mci\n"); + mci->mtype_cap = MEM_FLAG_RDDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED | + EDAC_FLAG_S4ECD4ED; + /* FIXME - what if different memory types are in different csrows? */ + mci->mod_name = EDAC_MOD_STR; + mci->pdev = &pdev->dev; + edac_dbg(3, "init pvt\n"); + pvt = (struct e7xxx_pvt *)mci->pvt_info; + pvt->dev_info = &e7xxx_devs[dev_idx]; + pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL, + pvt->dev_info->err_dev, pvt->bridge_ck); + + if (!pvt->bridge_ck) { + e7xxx_printk(KERN_ERR, "error reporting device not found:" + "vendor %x device 0x%x (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, e7xxx_devs[dev_idx].err_dev); + goto fail0; + } + + edac_dbg(3, "more mci init\n"); + mci->ctl_name = pvt->dev_info->ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = e7xxx_check; + mci->ctl_page_to_phys = ctl_page_to_phys; + e7xxx_init_csrows(mci, pdev, dev_idx, drc); + mci->edac_cap |= EDAC_FLAG_NONE; + edac_dbg(3, "tolm, remapbase, remaplimit\n"); + /* load the top of low memory, remap base, and remap limit vars */ + pci_read_config_word(pdev, E7XXX_TOLM, &pci_data); + pvt->tolm = ((u32) pci_data) << 4; + pci_read_config_word(pdev, E7XXX_REMAPBASE, &pci_data); + pvt->remapbase = ((u32) pci_data) << 14; + pci_read_config_word(pdev, E7XXX_REMAPLIMIT, &pci_data); + pvt->remaplimit = ((u32) pci_data) << 14; + e7xxx_printk(KERN_INFO, + "tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm, + pvt->remapbase, pvt->remaplimit); + + /* clear any pending errors, or initial state bits */ + e7xxx_get_error_info(mci, &discard); + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail1; + } + + /* allocating generic PCI control info */ + e7xxx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!e7xxx_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + return 0; + +fail1: + pci_dev_put(pvt->bridge_ck); + +fail0: + edac_mc_free(mci); + + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int e7xxx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + edac_dbg(0, "\n"); + + /* wake up and enable device */ + return pci_enable_device(pdev) ? + -EIO : e7xxx_probe1(pdev, ent->driver_data); +} + +static void e7xxx_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct e7xxx_pvt *pvt; + + edac_dbg(0, "\n"); + + if (e7xxx_pci) + edac_pci_release_generic_ctl(e7xxx_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + pvt = (struct e7xxx_pvt *)mci->pvt_info; + pci_dev_put(pvt->bridge_ck); + edac_mc_free(mci); +} + +static const struct pci_device_id e7xxx_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 7205_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7205}, + { + PCI_VEND_DEV(INTEL, 7500_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7500}, + { + PCI_VEND_DEV(INTEL, 7501_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7501}, + { + PCI_VEND_DEV(INTEL, 7505_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + E7505}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl); + +static struct pci_driver e7xxx_driver = { + .name = EDAC_MOD_STR, + .probe = e7xxx_init_one, + .remove = e7xxx_remove_one, + .id_table = e7xxx_pci_tbl, +}; + +static int __init e7xxx_init(void) +{ + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + return pci_register_driver(&e7xxx_driver); +} + +static void __exit e7xxx_exit(void) +{ + pci_unregister_driver(&e7xxx_driver); +} + +module_init(e7xxx_init); +module_exit(e7xxx_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh et al\n" + "Based on.work by Dan Hollis et al"); +MODULE_DESCRIPTION("MC support for Intel e7xxx memory controllers"); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c new file mode 100644 index 000000000..0689e1510 --- /dev/null +++ b/drivers/edac/edac_device.c @@ -0,0 +1,621 @@ + +/* + * edac_device.c + * (C) 2007 www.douglaskthompson.com + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Doug Thompson <norsk5@xmission.com> + * + * edac_device API implementation + * 19 Jan 2007 + */ + +#include <asm/page.h> +#include <linux/uaccess.h> +#include <linux/ctype.h> +#include <linux/highmem.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/sysctl.h> +#include <linux/timer.h> + +#include "edac_device.h" +#include "edac_module.h" + +/* lock for the list: 'edac_device_list', manipulation of this list + * is protected by the 'device_ctls_mutex' lock + */ +static DEFINE_MUTEX(device_ctls_mutex); +static LIST_HEAD(edac_device_list); + +/* Default workqueue processing interval on this instance, in msecs */ +#define DEFAULT_POLL_INTERVAL 1000 + +#ifdef CONFIG_EDAC_DEBUG +static void edac_device_dump_device(struct edac_device_ctl_info *edac_dev) +{ + edac_dbg(3, "\tedac_dev = %p dev_idx=%d\n", + edac_dev, edac_dev->dev_idx); + edac_dbg(4, "\tedac_dev->edac_check = %p\n", edac_dev->edac_check); + edac_dbg(3, "\tdev = %p\n", edac_dev->dev); + edac_dbg(3, "\tmod_name:ctl_name = %s:%s\n", + edac_dev->mod_name, edac_dev->ctl_name); + edac_dbg(3, "\tpvt_info = %p\n\n", edac_dev->pvt_info); +} +#endif /* CONFIG_EDAC_DEBUG */ + +/* + * @off_val: zero, 1, or other based offset + */ +struct edac_device_ctl_info * +edac_device_alloc_ctl_info(unsigned pvt_sz, char *dev_name, unsigned nr_instances, + char *blk_name, unsigned nr_blocks, unsigned off_val, + struct edac_dev_sysfs_block_attribute *attrib_spec, + unsigned nr_attrib, int device_index) +{ + struct edac_dev_sysfs_block_attribute *dev_attrib, *attrib_p, *attrib; + struct edac_device_block *dev_blk, *blk_p, *blk; + struct edac_device_instance *dev_inst, *inst; + struct edac_device_ctl_info *dev_ctl; + unsigned instance, block, attr; + void *pvt; + int err; + + edac_dbg(4, "instances=%d blocks=%d\n", nr_instances, nr_blocks); + + dev_ctl = kzalloc(sizeof(struct edac_device_ctl_info), GFP_KERNEL); + if (!dev_ctl) + return NULL; + + dev_inst = kcalloc(nr_instances, sizeof(struct edac_device_instance), GFP_KERNEL); + if (!dev_inst) + goto free; + + dev_ctl->instances = dev_inst; + + dev_blk = kcalloc(nr_instances * nr_blocks, sizeof(struct edac_device_block), GFP_KERNEL); + if (!dev_blk) + goto free; + + dev_ctl->blocks = dev_blk; + + if (nr_attrib) { + dev_attrib = kcalloc(nr_attrib, sizeof(struct edac_dev_sysfs_block_attribute), + GFP_KERNEL); + if (!dev_attrib) + goto free; + + dev_ctl->attribs = dev_attrib; + } + + if (pvt_sz) { + pvt = kzalloc(pvt_sz, GFP_KERNEL); + if (!pvt) + goto free; + + dev_ctl->pvt_info = pvt; + } + + dev_ctl->dev_idx = device_index; + dev_ctl->nr_instances = nr_instances; + + /* Default logging of CEs and UEs */ + dev_ctl->log_ce = 1; + dev_ctl->log_ue = 1; + + /* Name of this edac device */ + snprintf(dev_ctl->name, sizeof(dev_ctl->name),"%s", dev_name); + + /* Initialize every Instance */ + for (instance = 0; instance < nr_instances; instance++) { + inst = &dev_inst[instance]; + inst->ctl = dev_ctl; + inst->nr_blocks = nr_blocks; + blk_p = &dev_blk[instance * nr_blocks]; + inst->blocks = blk_p; + + /* name of this instance */ + snprintf(inst->name, sizeof(inst->name), "%s%u", dev_name, instance); + + /* Initialize every block in each instance */ + for (block = 0; block < nr_blocks; block++) { + blk = &blk_p[block]; + blk->instance = inst; + snprintf(blk->name, sizeof(blk->name), + "%s%d", blk_name, block + off_val); + + edac_dbg(4, "instance=%d inst_p=%p block=#%d block_p=%p name='%s'\n", + instance, inst, block, blk, blk->name); + + /* if there are NO attributes OR no attribute pointer + * then continue on to next block iteration + */ + if ((nr_attrib == 0) || (attrib_spec == NULL)) + continue; + + /* setup the attribute array for this block */ + blk->nr_attribs = nr_attrib; + attrib_p = &dev_attrib[block*nr_instances*nr_attrib]; + blk->block_attributes = attrib_p; + + edac_dbg(4, "THIS BLOCK_ATTRIB=%p\n", + blk->block_attributes); + + /* Initialize every user specified attribute in this + * block with the data the caller passed in + * Each block gets its own copy of pointers, + * and its unique 'value' + */ + for (attr = 0; attr < nr_attrib; attr++) { + attrib = &attrib_p[attr]; + + /* populate the unique per attrib + * with the code pointers and info + */ + attrib->attr = attrib_spec[attr].attr; + attrib->show = attrib_spec[attr].show; + attrib->store = attrib_spec[attr].store; + + attrib->block = blk; /* up link */ + + edac_dbg(4, "alloc-attrib=%p attrib_name='%s' attrib-spec=%p spec-name=%s\n", + attrib, attrib->attr.name, + &attrib_spec[attr], + attrib_spec[attr].attr.name + ); + } + } + } + + /* Mark this instance as merely ALLOCATED */ + dev_ctl->op_state = OP_ALLOC; + + /* + * Initialize the 'root' kobj for the edac_device controller + */ + err = edac_device_register_sysfs_main_kobj(dev_ctl); + if (err) + goto free; + + /* at this point, the root kobj is valid, and in order to + * 'free' the object, then the function: + * edac_device_unregister_sysfs_main_kobj() must be called + * which will perform kobj unregistration and the actual free + * will occur during the kobject callback operation + */ + + return dev_ctl; + +free: + __edac_device_free_ctl_info(dev_ctl); + + return NULL; +} +EXPORT_SYMBOL_GPL(edac_device_alloc_ctl_info); + +void edac_device_free_ctl_info(struct edac_device_ctl_info *ctl_info) +{ + edac_device_unregister_sysfs_main_kobj(ctl_info); +} +EXPORT_SYMBOL_GPL(edac_device_free_ctl_info); + +/* + * find_edac_device_by_dev + * scans the edac_device list for a specific 'struct device *' + * + * lock to be held prior to call: device_ctls_mutex + * + * Return: + * pointer to control structure managing 'dev' + * NULL if not found on list + */ +static struct edac_device_ctl_info *find_edac_device_by_dev(struct device *dev) +{ + struct edac_device_ctl_info *edac_dev; + struct list_head *item; + + edac_dbg(0, "\n"); + + list_for_each(item, &edac_device_list) { + edac_dev = list_entry(item, struct edac_device_ctl_info, link); + + if (edac_dev->dev == dev) + return edac_dev; + } + + return NULL; +} + +/* + * add_edac_dev_to_global_list + * Before calling this function, caller must + * assign a unique value to edac_dev->dev_idx. + * + * lock to be held prior to call: device_ctls_mutex + * + * Return: + * 0 on success + * 1 on failure. + */ +static int add_edac_dev_to_global_list(struct edac_device_ctl_info *edac_dev) +{ + struct list_head *item, *insert_before; + struct edac_device_ctl_info *rover; + + insert_before = &edac_device_list; + + /* Determine if already on the list */ + rover = find_edac_device_by_dev(edac_dev->dev); + if (unlikely(rover != NULL)) + goto fail0; + + /* Insert in ascending order by 'dev_idx', so find position */ + list_for_each(item, &edac_device_list) { + rover = list_entry(item, struct edac_device_ctl_info, link); + + if (rover->dev_idx >= edac_dev->dev_idx) { + if (unlikely(rover->dev_idx == edac_dev->dev_idx)) + goto fail1; + + insert_before = item; + break; + } + } + + list_add_tail_rcu(&edac_dev->link, insert_before); + return 0; + +fail0: + edac_printk(KERN_WARNING, EDAC_MC, + "%s (%s) %s %s already assigned %d\n", + dev_name(rover->dev), edac_dev_name(rover), + rover->mod_name, rover->ctl_name, rover->dev_idx); + return 1; + +fail1: + edac_printk(KERN_WARNING, EDAC_MC, + "bug in low-level driver: attempt to assign\n" + " duplicate dev_idx %d in %s()\n", rover->dev_idx, + __func__); + return 1; +} + +/* + * del_edac_device_from_global_list + */ +static void del_edac_device_from_global_list(struct edac_device_ctl_info + *edac_device) +{ + list_del_rcu(&edac_device->link); + + /* these are for safe removal of devices from global list while + * NMI handlers may be traversing list + */ + synchronize_rcu(); + INIT_LIST_HEAD(&edac_device->link); +} + +/* + * edac_device_workq_function + * performs the operation scheduled by a workq request + * + * this workq is embedded within an edac_device_ctl_info + * structure, that needs to be polled for possible error events. + * + * This operation is to acquire the list mutex lock + * (thus preventing insertation or deletion) + * and then call the device's poll function IFF this device is + * running polled and there is a poll function defined. + */ +static void edac_device_workq_function(struct work_struct *work_req) +{ + struct delayed_work *d_work = to_delayed_work(work_req); + struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work); + + mutex_lock(&device_ctls_mutex); + + /* If we are being removed, bail out immediately */ + if (edac_dev->op_state == OP_OFFLINE) { + mutex_unlock(&device_ctls_mutex); + return; + } + + /* Only poll controllers that are running polled and have a check */ + if ((edac_dev->op_state == OP_RUNNING_POLL) && + (edac_dev->edac_check != NULL)) { + edac_dev->edac_check(edac_dev); + } + + mutex_unlock(&device_ctls_mutex); + + /* Reschedule the workq for the next time period to start again + * if the number of msec is for 1 sec, then adjust to the next + * whole one second to save timers firing all over the period + * between integral seconds + */ + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) + edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); + else + edac_queue_work(&edac_dev->work, edac_dev->delay); +} + +/* + * edac_device_workq_setup + * initialize a workq item for this edac_device instance + * passing in the new delay period in msec + */ +static void edac_device_workq_setup(struct edac_device_ctl_info *edac_dev, + unsigned msec) +{ + edac_dbg(0, "\n"); + + /* take the arg 'msec' and set it into the control structure + * to used in the time period calculation + * then calc the number of jiffies that represents + */ + edac_dev->poll_msec = msec; + edac_dev->delay = msecs_to_jiffies(msec); + + INIT_DELAYED_WORK(&edac_dev->work, edac_device_workq_function); + + /* optimize here for the 1 second case, which will be normal value, to + * fire ON the 1 second time event. This helps reduce all sorts of + * timers firing on sub-second basis, while they are happy + * to fire together on the 1 second exactly + */ + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) + edac_queue_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); + else + edac_queue_work(&edac_dev->work, edac_dev->delay); +} + +/* + * edac_device_workq_teardown + * stop the workq processing on this edac_dev + */ +static void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev) +{ + if (!edac_dev->edac_check) + return; + + edac_dev->op_state = OP_OFFLINE; + + edac_stop_work(&edac_dev->work); +} + +/* + * edac_device_reset_delay_period + * + * need to stop any outstanding workq queued up at this time + * because we will be resetting the sleep time. + * Then restart the workq on the new delay + */ +void edac_device_reset_delay_period(struct edac_device_ctl_info *edac_dev, + unsigned long msec) +{ + edac_dev->poll_msec = msec; + edac_dev->delay = msecs_to_jiffies(msec); + + /* See comment in edac_device_workq_setup() above */ + if (edac_dev->poll_msec == DEFAULT_POLL_INTERVAL) + edac_mod_work(&edac_dev->work, round_jiffies_relative(edac_dev->delay)); + else + edac_mod_work(&edac_dev->work, edac_dev->delay); +} + +int edac_device_alloc_index(void) +{ + static atomic_t device_indexes = ATOMIC_INIT(0); + + return atomic_inc_return(&device_indexes) - 1; +} +EXPORT_SYMBOL_GPL(edac_device_alloc_index); + +int edac_device_add_device(struct edac_device_ctl_info *edac_dev) +{ + edac_dbg(0, "\n"); + +#ifdef CONFIG_EDAC_DEBUG + if (edac_debug_level >= 3) + edac_device_dump_device(edac_dev); +#endif + mutex_lock(&device_ctls_mutex); + + if (add_edac_dev_to_global_list(edac_dev)) + goto fail0; + + /* set load time so that error rate can be tracked */ + edac_dev->start_time = jiffies; + + /* create this instance's sysfs entries */ + if (edac_device_create_sysfs(edac_dev)) { + edac_device_printk(edac_dev, KERN_WARNING, + "failed to create sysfs device\n"); + goto fail1; + } + + /* If there IS a check routine, then we are running POLLED */ + if (edac_dev->edac_check != NULL) { + /* This instance is NOW RUNNING */ + edac_dev->op_state = OP_RUNNING_POLL; + + edac_device_workq_setup(edac_dev, edac_dev->poll_msec ?: DEFAULT_POLL_INTERVAL); + } else { + edac_dev->op_state = OP_RUNNING_INTERRUPT; + } + + /* Report action taken */ + edac_device_printk(edac_dev, KERN_INFO, + "Giving out device to module %s controller %s: DEV %s (%s)\n", + edac_dev->mod_name, edac_dev->ctl_name, edac_dev->dev_name, + edac_op_state_to_string(edac_dev->op_state)); + + mutex_unlock(&device_ctls_mutex); + return 0; + +fail1: + /* Some error, so remove the entry from the lsit */ + del_edac_device_from_global_list(edac_dev); + +fail0: + mutex_unlock(&device_ctls_mutex); + return 1; +} +EXPORT_SYMBOL_GPL(edac_device_add_device); + +struct edac_device_ctl_info *edac_device_del_device(struct device *dev) +{ + struct edac_device_ctl_info *edac_dev; + + edac_dbg(0, "\n"); + + mutex_lock(&device_ctls_mutex); + + /* Find the structure on the list, if not there, then leave */ + edac_dev = find_edac_device_by_dev(dev); + if (edac_dev == NULL) { + mutex_unlock(&device_ctls_mutex); + return NULL; + } + + /* mark this instance as OFFLINE */ + edac_dev->op_state = OP_OFFLINE; + + /* deregister from global list */ + del_edac_device_from_global_list(edac_dev); + + mutex_unlock(&device_ctls_mutex); + + /* clear workq processing on this instance */ + edac_device_workq_teardown(edac_dev); + + /* Tear down the sysfs entries for this instance */ + edac_device_remove_sysfs(edac_dev); + + edac_printk(KERN_INFO, EDAC_MC, + "Removed device %d for %s %s: DEV %s\n", + edac_dev->dev_idx, + edac_dev->mod_name, edac_dev->ctl_name, edac_dev_name(edac_dev)); + + return edac_dev; +} +EXPORT_SYMBOL_GPL(edac_device_del_device); + +static inline int edac_device_get_log_ce(struct edac_device_ctl_info *edac_dev) +{ + return edac_dev->log_ce; +} + +static inline int edac_device_get_log_ue(struct edac_device_ctl_info *edac_dev) +{ + return edac_dev->log_ue; +} + +static inline int edac_device_get_panic_on_ue(struct edac_device_ctl_info + *edac_dev) +{ + return edac_dev->panic_on_ue; +} + +void edac_device_handle_ce_count(struct edac_device_ctl_info *edac_dev, + unsigned int count, int inst_nr, int block_nr, + const char *msg) +{ + struct edac_device_instance *instance; + struct edac_device_block *block = NULL; + + if (!count) + return; + + if ((inst_nr >= edac_dev->nr_instances) || (inst_nr < 0)) { + edac_device_printk(edac_dev, KERN_ERR, + "INTERNAL ERROR: 'instance' out of range " + "(%d >= %d)\n", inst_nr, + edac_dev->nr_instances); + return; + } + + instance = edac_dev->instances + inst_nr; + + if ((block_nr >= instance->nr_blocks) || (block_nr < 0)) { + edac_device_printk(edac_dev, KERN_ERR, + "INTERNAL ERROR: instance %d 'block' " + "out of range (%d >= %d)\n", + inst_nr, block_nr, + instance->nr_blocks); + return; + } + + if (instance->nr_blocks > 0) { + block = instance->blocks + block_nr; + block->counters.ce_count += count; + } + + /* Propagate the count up the 'totals' tree */ + instance->counters.ce_count += count; + edac_dev->counters.ce_count += count; + + if (edac_device_get_log_ce(edac_dev)) + edac_device_printk(edac_dev, KERN_WARNING, + "CE: %s instance: %s block: %s count: %d '%s'\n", + edac_dev->ctl_name, instance->name, + block ? block->name : "N/A", count, msg); +} +EXPORT_SYMBOL_GPL(edac_device_handle_ce_count); + +void edac_device_handle_ue_count(struct edac_device_ctl_info *edac_dev, + unsigned int count, int inst_nr, int block_nr, + const char *msg) +{ + struct edac_device_instance *instance; + struct edac_device_block *block = NULL; + + if (!count) + return; + + if ((inst_nr >= edac_dev->nr_instances) || (inst_nr < 0)) { + edac_device_printk(edac_dev, KERN_ERR, + "INTERNAL ERROR: 'instance' out of range " + "(%d >= %d)\n", inst_nr, + edac_dev->nr_instances); + return; + } + + instance = edac_dev->instances + inst_nr; + + if ((block_nr >= instance->nr_blocks) || (block_nr < 0)) { + edac_device_printk(edac_dev, KERN_ERR, + "INTERNAL ERROR: instance %d 'block' " + "out of range (%d >= %d)\n", + inst_nr, block_nr, + instance->nr_blocks); + return; + } + + if (instance->nr_blocks > 0) { + block = instance->blocks + block_nr; + block->counters.ue_count += count; + } + + /* Propagate the count up the 'totals' tree */ + instance->counters.ue_count += count; + edac_dev->counters.ue_count += count; + + if (edac_device_get_log_ue(edac_dev)) + edac_device_printk(edac_dev, KERN_EMERG, + "UE: %s instance: %s block: %s count: %d '%s'\n", + edac_dev->ctl_name, instance->name, + block ? block->name : "N/A", count, msg); + + if (edac_device_get_panic_on_ue(edac_dev)) + panic("EDAC %s: UE instance: %s block %s count: %d '%s'\n", + edac_dev->ctl_name, instance->name, + block ? block->name : "N/A", count, msg); +} +EXPORT_SYMBOL_GPL(edac_device_handle_ue_count); diff --git a/drivers/edac/edac_device.h b/drivers/edac/edac_device.h new file mode 100644 index 000000000..3f44e6b9d --- /dev/null +++ b/drivers/edac/edac_device.h @@ -0,0 +1,365 @@ +/* + * Defines, structures, APIs for edac_device + * + * (C) 2007 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * NMI handling support added by + * Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com> + * + * Refactored for multi-source files: + * Doug Thompson <norsk5@xmission.com> + * + * Please look at Documentation/driver-api/edac.rst for more info about + * EDAC core structs and functions. + */ + +#ifndef _EDAC_DEVICE_H_ +#define _EDAC_DEVICE_H_ + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/edac.h> +#include <linux/kobject.h> +#include <linux/list.h> +#include <linux/types.h> +#include <linux/sysfs.h> +#include <linux/workqueue.h> + + +/* + * The following are the structures to provide for a generic + * or abstract 'edac_device'. This set of structures and the + * code that implements the APIs for the same, provide for + * registering EDAC type devices which are NOT standard memory. + * + * CPU caches (L1 and L2) + * DMA engines + * Core CPU switches + * Fabric switch units + * PCIe interface controllers + * other EDAC/ECC type devices that can be monitored for + * errors, etc. + * + * It allows for a 2 level set of hierarchy. For example: + * + * cache could be composed of L1, L2 and L3 levels of cache. + * Each CPU core would have its own L1 cache, while sharing + * L2 and maybe L3 caches. + * + * View them arranged, via the sysfs presentation: + * /sys/devices/system/edac/.. + * + * mc/ <existing memory device directory> + * cpu/cpu0/.. <L1 and L2 block directory> + * /L1-cache/ce_count + * /ue_count + * /L2-cache/ce_count + * /ue_count + * cpu/cpu1/.. <L1 and L2 block directory> + * /L1-cache/ce_count + * /ue_count + * /L2-cache/ce_count + * /ue_count + * ... + * + * the L1 and L2 directories would be "edac_device_block's" + */ + +struct edac_device_counter { + u32 ue_count; + u32 ce_count; +}; + +/* forward reference */ +struct edac_device_ctl_info; +struct edac_device_block; + +/* edac_dev_sysfs_attribute structure + * used for driver sysfs attributes in mem_ctl_info + * for extra controls and attributes: + * like high level error Injection controls + */ +struct edac_dev_sysfs_attribute { + struct attribute attr; + ssize_t (*show)(struct edac_device_ctl_info *, char *); + ssize_t (*store)(struct edac_device_ctl_info *, const char *, size_t); +}; + +/* edac_dev_sysfs_block_attribute structure + * + * used in leaf 'block' nodes for adding controls/attributes + * + * each block in each instance of the containing control structure + * can have an array of the following. The show and store functions + * will be filled in with the show/store function in the + * low level driver. + * + * The 'value' field will be the actual value field used for + * counting + */ +struct edac_dev_sysfs_block_attribute { + struct attribute attr; + ssize_t (*show)(struct kobject *, struct attribute *, char *); + ssize_t (*store)(struct kobject *, struct attribute *, + const char *, size_t); + struct edac_device_block *block; + + unsigned int value; +}; + +/* device block control structure */ +struct edac_device_block { + struct edac_device_instance *instance; /* Up Pointer */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + struct edac_device_counter counters; /* basic UE and CE counters */ + + int nr_attribs; /* how many attributes */ + + /* this block's attributes, could be NULL */ + struct edac_dev_sysfs_block_attribute *block_attributes; + + /* edac sysfs device control */ + struct kobject kobj; +}; + +/* device instance control structure */ +struct edac_device_instance { + struct edac_device_ctl_info *ctl; /* Up pointer */ + char name[EDAC_DEVICE_NAME_LEN + 4]; + + struct edac_device_counter counters; /* instance counters */ + + u32 nr_blocks; /* how many blocks */ + struct edac_device_block *blocks; /* block array */ + + /* edac sysfs device control */ + struct kobject kobj; +}; + + +/* + * Abstract edac_device control info structure + * + */ +struct edac_device_ctl_info { + /* for global list of edac_device_ctl_info structs */ + struct list_head link; + + struct module *owner; /* Module owner of this control struct */ + + int dev_idx; + + /* Per instance controls for this edac_device */ + int log_ue; /* boolean for logging UEs */ + int log_ce; /* boolean for logging CEs */ + int panic_on_ue; /* boolean for panic'ing on an UE */ + unsigned poll_msec; /* number of milliseconds to poll interval */ + unsigned long delay; /* number of jiffies for poll_msec */ + + /* Additional top controller level attributes, but specified + * by the low level driver. + * + * Set by the low level driver to provide attributes at the + * controller level, same level as 'ue_count' and 'ce_count' above. + * An array of structures, NULL terminated + * + * If attributes are desired, then set to array of attributes + * If no attributes are desired, leave NULL + */ + struct edac_dev_sysfs_attribute *sysfs_attributes; + + /* pointer to main 'edac' subsys in sysfs */ + struct bus_type *edac_subsys; + + /* the internal state of this controller instance */ + int op_state; + /* work struct for this instance */ + struct delayed_work work; + + /* pointer to edac polling checking routine: + * If NOT NULL: points to polling check routine + * If NULL: Then assumes INTERRUPT operation, where + * MC driver will receive events + */ + void (*edac_check) (struct edac_device_ctl_info * edac_dev); + + struct device *dev; /* pointer to device structure */ + + const char *mod_name; /* module name */ + const char *ctl_name; /* edac controller name */ + const char *dev_name; /* pci/platform/etc... name */ + + void *pvt_info; /* pointer to 'private driver' info */ + + unsigned long start_time; /* edac_device load start time (jiffies) */ + + struct completion removal_complete; + + /* sysfs top name under 'edac' directory + * and instance name: + * cpu/cpu0/... + * cpu/cpu1/... + * cpu/cpu2/... + * ... + */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + /* Number of instances supported on this control structure + * and the array of those instances + */ + u32 nr_instances; + struct edac_device_instance *instances; + struct edac_device_block *blocks; + struct edac_dev_sysfs_block_attribute *attribs; + + /* Event counters for the this whole EDAC Device */ + struct edac_device_counter counters; + + /* edac sysfs device control for the 'name' + * device this structure controls + */ + struct kobject kobj; +}; + +/* To get from the instance's wq to the beginning of the ctl structure */ +#define to_edac_mem_ctl_work(w) \ + container_of(w, struct mem_ctl_info, work) + +#define to_edac_device_ctl_work(w) \ + container_of(w,struct edac_device_ctl_info,work) + +/* + * The alloc() and free() functions for the 'edac_device' control info + * structure. A MC driver will allocate one of these for each edac_device + * it is going to control/register with the EDAC CORE. + */ +extern struct edac_device_ctl_info *edac_device_alloc_ctl_info( + unsigned sizeof_private, + char *edac_device_name, unsigned nr_instances, + char *edac_block_name, unsigned nr_blocks, + unsigned offset_value, + struct edac_dev_sysfs_block_attribute *block_attributes, + unsigned nr_attribs, + int device_index); + +/* The offset value can be: + * -1 indicating no offset value + * 0 for zero-based block numbers + * 1 for 1-based block number + * other for other-based block number + */ +#define BLOCK_OFFSET_VALUE_OFF ((unsigned) -1) + +extern void edac_device_free_ctl_info(struct edac_device_ctl_info *ctl_info); + +/** + * edac_device_add_device - Insert the 'edac_dev' structure into the + * edac_device global list and create sysfs entries associated with + * edac_device structure. + * + * @edac_dev: pointer to edac_device structure to be added to the list + * 'edac_device' structure. + * + * Returns: + * 0 on Success, or an error code on failure + */ +extern int edac_device_add_device(struct edac_device_ctl_info *edac_dev); + +/** + * edac_device_del_device - Remove sysfs entries for specified edac_device + * structure and then remove edac_device structure from global list + * + * @dev: + * Pointer to struct &device representing the edac device + * structure to remove. + * + * Returns: + * Pointer to removed edac_device structure, + * or %NULL if device not found. + */ +extern struct edac_device_ctl_info *edac_device_del_device(struct device *dev); + +/** + * edac_device_handle_ce_count - Log correctable errors. + * + * @edac_dev: pointer to struct &edac_device_ctl_info + * @inst_nr: number of the instance where the CE error happened + * @count: Number of errors to log. + * @block_nr: number of the block where the CE error happened + * @msg: message to be printed + */ +void edac_device_handle_ce_count(struct edac_device_ctl_info *edac_dev, + unsigned int count, int inst_nr, int block_nr, + const char *msg); + +/** + * edac_device_handle_ue_count - Log uncorrectable errors. + * + * @edac_dev: pointer to struct &edac_device_ctl_info + * @inst_nr: number of the instance where the CE error happened + * @count: Number of errors to log. + * @block_nr: number of the block where the CE error happened + * @msg: message to be printed + */ +void edac_device_handle_ue_count(struct edac_device_ctl_info *edac_dev, + unsigned int count, int inst_nr, int block_nr, + const char *msg); + +/** + * edac_device_handle_ce(): Log a single correctable error + * + * @edac_dev: pointer to struct &edac_device_ctl_info + * @inst_nr: number of the instance where the CE error happened + * @block_nr: number of the block where the CE error happened + * @msg: message to be printed + */ +static inline void +edac_device_handle_ce(struct edac_device_ctl_info *edac_dev, int inst_nr, + int block_nr, const char *msg) +{ + edac_device_handle_ce_count(edac_dev, 1, inst_nr, block_nr, msg); +} + +/** + * edac_device_handle_ue(): Log a single uncorrectable error + * + * @edac_dev: pointer to struct &edac_device_ctl_info + * @inst_nr: number of the instance where the UE error happened + * @block_nr: number of the block where the UE error happened + * @msg: message to be printed + */ +static inline void +edac_device_handle_ue(struct edac_device_ctl_info *edac_dev, int inst_nr, + int block_nr, const char *msg) +{ + edac_device_handle_ue_count(edac_dev, 1, inst_nr, block_nr, msg); +} + +/** + * edac_device_alloc_index: Allocate a unique device index number + * + * Returns: + * allocated index number + */ +extern int edac_device_alloc_index(void); +extern const char *edac_layer_name[]; + +/* Free the actual struct */ +static inline void __edac_device_free_ctl_info(struct edac_device_ctl_info *ci) +{ + if (ci) { + kfree(ci->pvt_info); + kfree(ci->attribs); + kfree(ci->blocks); + kfree(ci->instances); + kfree(ci); + } +} +#endif diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c new file mode 100644 index 000000000..ac678b4a2 --- /dev/null +++ b/drivers/edac/edac_device_sysfs.c @@ -0,0 +1,871 @@ +/* + * file for managing the edac_device subsystem of devices for EDAC + * + * (C) 2007 SoftwareBitMaker + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written Doug Thompson <norsk5@xmission.com> + * + */ + +#include <linux/ctype.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/edac.h> + +#include "edac_device.h" +#include "edac_module.h" + +#define EDAC_DEVICE_SYMLINK "device" + +#define to_edacdev(k) container_of(k, struct edac_device_ctl_info, kobj) +#define to_edacdev_attr(a) container_of(a, struct edacdev_attribute, attr) + + +/* + * Set of edac_device_ctl_info attribute store/show functions + */ + +/* 'log_ue' */ +static ssize_t edac_device_ctl_log_ue_show(struct edac_device_ctl_info + *ctl_info, char *data) +{ + return sprintf(data, "%u\n", ctl_info->log_ue); +} + +static ssize_t edac_device_ctl_log_ue_store(struct edac_device_ctl_info + *ctl_info, const char *data, + size_t count) +{ + /* if parameter is zero, turn off flag, if non-zero turn on flag */ + ctl_info->log_ue = (simple_strtoul(data, NULL, 0) != 0); + + return count; +} + +/* 'log_ce' */ +static ssize_t edac_device_ctl_log_ce_show(struct edac_device_ctl_info + *ctl_info, char *data) +{ + return sprintf(data, "%u\n", ctl_info->log_ce); +} + +static ssize_t edac_device_ctl_log_ce_store(struct edac_device_ctl_info + *ctl_info, const char *data, + size_t count) +{ + /* if parameter is zero, turn off flag, if non-zero turn on flag */ + ctl_info->log_ce = (simple_strtoul(data, NULL, 0) != 0); + + return count; +} + +/* 'panic_on_ue' */ +static ssize_t edac_device_ctl_panic_on_ue_show(struct edac_device_ctl_info + *ctl_info, char *data) +{ + return sprintf(data, "%u\n", ctl_info->panic_on_ue); +} + +static ssize_t edac_device_ctl_panic_on_ue_store(struct edac_device_ctl_info + *ctl_info, const char *data, + size_t count) +{ + /* if parameter is zero, turn off flag, if non-zero turn on flag */ + ctl_info->panic_on_ue = (simple_strtoul(data, NULL, 0) != 0); + + return count; +} + +/* 'poll_msec' show and store functions*/ +static ssize_t edac_device_ctl_poll_msec_show(struct edac_device_ctl_info + *ctl_info, char *data) +{ + return sprintf(data, "%u\n", ctl_info->poll_msec); +} + +static ssize_t edac_device_ctl_poll_msec_store(struct edac_device_ctl_info + *ctl_info, const char *data, + size_t count) +{ + unsigned long value; + + /* get the value and enforce that it is non-zero, must be at least + * one millisecond for the delay period, between scans + * Then cancel last outstanding delay for the work request + * and set a new one. + */ + value = simple_strtoul(data, NULL, 0); + edac_device_reset_delay_period(ctl_info, value); + + return count; +} + +/* edac_device_ctl_info specific attribute structure */ +struct ctl_info_attribute { + struct attribute attr; + ssize_t(*show) (struct edac_device_ctl_info *, char *); + ssize_t(*store) (struct edac_device_ctl_info *, const char *, size_t); +}; + +#define to_ctl_info(k) container_of(k, struct edac_device_ctl_info, kobj) +#define to_ctl_info_attr(a) container_of(a,struct ctl_info_attribute,attr) + +/* Function to 'show' fields from the edac_dev 'ctl_info' structure */ +static ssize_t edac_dev_ctl_info_show(struct kobject *kobj, + struct attribute *attr, char *buffer) +{ + struct edac_device_ctl_info *edac_dev = to_ctl_info(kobj); + struct ctl_info_attribute *ctl_info_attr = to_ctl_info_attr(attr); + + if (ctl_info_attr->show) + return ctl_info_attr->show(edac_dev, buffer); + return -EIO; +} + +/* Function to 'store' fields into the edac_dev 'ctl_info' structure */ +static ssize_t edac_dev_ctl_info_store(struct kobject *kobj, + struct attribute *attr, + const char *buffer, size_t count) +{ + struct edac_device_ctl_info *edac_dev = to_ctl_info(kobj); + struct ctl_info_attribute *ctl_info_attr = to_ctl_info_attr(attr); + + if (ctl_info_attr->store) + return ctl_info_attr->store(edac_dev, buffer, count); + return -EIO; +} + +/* edac_dev file operations for an 'ctl_info' */ +static const struct sysfs_ops device_ctl_info_ops = { + .show = edac_dev_ctl_info_show, + .store = edac_dev_ctl_info_store +}; + +#define CTL_INFO_ATTR(_name,_mode,_show,_store) \ +static struct ctl_info_attribute attr_ctl_info_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +/* Declare the various ctl_info attributes here and their respective ops */ +CTL_INFO_ATTR(log_ue, S_IRUGO | S_IWUSR, + edac_device_ctl_log_ue_show, edac_device_ctl_log_ue_store); +CTL_INFO_ATTR(log_ce, S_IRUGO | S_IWUSR, + edac_device_ctl_log_ce_show, edac_device_ctl_log_ce_store); +CTL_INFO_ATTR(panic_on_ue, S_IRUGO | S_IWUSR, + edac_device_ctl_panic_on_ue_show, + edac_device_ctl_panic_on_ue_store); +CTL_INFO_ATTR(poll_msec, S_IRUGO | S_IWUSR, + edac_device_ctl_poll_msec_show, edac_device_ctl_poll_msec_store); + +/* Base Attributes of the EDAC_DEVICE ECC object */ +static struct attribute *device_ctrl_attrs[] = { + &attr_ctl_info_panic_on_ue.attr, + &attr_ctl_info_log_ue.attr, + &attr_ctl_info_log_ce.attr, + &attr_ctl_info_poll_msec.attr, + NULL, +}; +ATTRIBUTE_GROUPS(device_ctrl); + +/* + * edac_device_ctrl_master_release + * + * called when the reference count for the 'main' kobj + * for a edac_device control struct reaches zero + * + * Reference count model: + * One 'main' kobject for each control structure allocated. + * That main kobj is initially set to one AND + * the reference count for the EDAC 'core' module is + * bumped by one, thus added 'keep in memory' dependency. + * + * Each new internal kobj (in instances and blocks) then + * bumps the 'main' kobject. + * + * When they are released their release functions decrement + * the 'main' kobj. + * + * When the main kobj reaches zero (0) then THIS function + * is called which then decrements the EDAC 'core' module. + * When the module reference count reaches zero then the + * module no longer has dependency on keeping the release + * function code in memory and module can be unloaded. + * + * This will support several control objects as well, each + * with its own 'main' kobj. + */ +static void edac_device_ctrl_master_release(struct kobject *kobj) +{ + struct edac_device_ctl_info *edac_dev = to_edacdev(kobj); + + edac_dbg(4, "control index=%d\n", edac_dev->dev_idx); + + /* decrement the EDAC CORE module ref count */ + module_put(edac_dev->owner); + + __edac_device_free_ctl_info(edac_dev); +} + +/* ktype for the main (master) kobject */ +static struct kobj_type ktype_device_ctrl = { + .release = edac_device_ctrl_master_release, + .sysfs_ops = &device_ctl_info_ops, + .default_groups = device_ctrl_groups, +}; + +/* + * edac_device_register_sysfs_main_kobj + * + * perform the high level setup for the new edac_device instance + * + * Return: 0 SUCCESS + * !0 FAILURE + */ +int edac_device_register_sysfs_main_kobj(struct edac_device_ctl_info *edac_dev) +{ + struct bus_type *edac_subsys; + int err; + + edac_dbg(1, "\n"); + + /* get the /sys/devices/system/edac reference */ + edac_subsys = edac_get_sysfs_subsys(); + + /* Point to the 'edac_subsys' this instance 'reports' to */ + edac_dev->edac_subsys = edac_subsys; + + /* Init the devices's kobject */ + memset(&edac_dev->kobj, 0, sizeof(struct kobject)); + + /* Record which module 'owns' this control structure + * and bump the ref count of the module + */ + edac_dev->owner = THIS_MODULE; + + if (!try_module_get(edac_dev->owner)) { + err = -ENODEV; + goto err_out; + } + + /* register */ + err = kobject_init_and_add(&edac_dev->kobj, &ktype_device_ctrl, + &edac_subsys->dev_root->kobj, + "%s", edac_dev->name); + if (err) { + edac_dbg(1, "Failed to register '.../edac/%s'\n", + edac_dev->name); + goto err_kobj_reg; + } + kobject_uevent(&edac_dev->kobj, KOBJ_ADD); + + /* At this point, to 'free' the control struct, + * edac_device_unregister_sysfs_main_kobj() must be used + */ + + edac_dbg(4, "Registered '.../edac/%s' kobject\n", edac_dev->name); + + return 0; + + /* Error exit stack */ +err_kobj_reg: + kobject_put(&edac_dev->kobj); + module_put(edac_dev->owner); + +err_out: + return err; +} + +/* + * edac_device_unregister_sysfs_main_kobj: + * the '..../edac/<name>' kobject + */ +void edac_device_unregister_sysfs_main_kobj(struct edac_device_ctl_info *dev) +{ + edac_dbg(0, "\n"); + edac_dbg(4, "name of kobject is: %s\n", kobject_name(&dev->kobj)); + + /* + * Unregister the edac device's kobject and + * allow for reference count to reach 0 at which point + * the callback will be called to: + * a) module_put() this module + * b) 'kfree' the memory + */ + kobject_put(&dev->kobj); +} + +/* edac_dev -> instance information */ + +/* + * Set of low-level instance attribute show functions + */ +static ssize_t instance_ue_count_show(struct edac_device_instance *instance, + char *data) +{ + return sprintf(data, "%u\n", instance->counters.ue_count); +} + +static ssize_t instance_ce_count_show(struct edac_device_instance *instance, + char *data) +{ + return sprintf(data, "%u\n", instance->counters.ce_count); +} + +#define to_instance(k) container_of(k, struct edac_device_instance, kobj) +#define to_instance_attr(a) container_of(a,struct instance_attribute,attr) + +/* DEVICE instance kobject release() function */ +static void edac_device_ctrl_instance_release(struct kobject *kobj) +{ + struct edac_device_instance *instance; + + edac_dbg(1, "\n"); + + /* map from this kobj to the main control struct + * and then dec the main kobj count + */ + instance = to_instance(kobj); + kobject_put(&instance->ctl->kobj); +} + +/* instance specific attribute structure */ +struct instance_attribute { + struct attribute attr; + ssize_t(*show) (struct edac_device_instance *, char *); + ssize_t(*store) (struct edac_device_instance *, const char *, size_t); +}; + +/* Function to 'show' fields from the edac_dev 'instance' structure */ +static ssize_t edac_dev_instance_show(struct kobject *kobj, + struct attribute *attr, char *buffer) +{ + struct edac_device_instance *instance = to_instance(kobj); + struct instance_attribute *instance_attr = to_instance_attr(attr); + + if (instance_attr->show) + return instance_attr->show(instance, buffer); + return -EIO; +} + +/* Function to 'store' fields into the edac_dev 'instance' structure */ +static ssize_t edac_dev_instance_store(struct kobject *kobj, + struct attribute *attr, + const char *buffer, size_t count) +{ + struct edac_device_instance *instance = to_instance(kobj); + struct instance_attribute *instance_attr = to_instance_attr(attr); + + if (instance_attr->store) + return instance_attr->store(instance, buffer, count); + return -EIO; +} + +/* edac_dev file operations for an 'instance' */ +static const struct sysfs_ops device_instance_ops = { + .show = edac_dev_instance_show, + .store = edac_dev_instance_store +}; + +#define INSTANCE_ATTR(_name,_mode,_show,_store) \ +static struct instance_attribute attr_instance_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +/* + * Define attributes visible for the edac_device instance object + * Each contains a pointer to a show and an optional set + * function pointer that does the low level output/input + */ +INSTANCE_ATTR(ce_count, S_IRUGO, instance_ce_count_show, NULL); +INSTANCE_ATTR(ue_count, S_IRUGO, instance_ue_count_show, NULL); + +/* list of edac_dev 'instance' attributes */ +static struct attribute *device_instance_attrs[] = { + &attr_instance_ce_count.attr, + &attr_instance_ue_count.attr, + NULL, +}; +ATTRIBUTE_GROUPS(device_instance); + +/* The 'ktype' for each edac_dev 'instance' */ +static struct kobj_type ktype_instance_ctrl = { + .release = edac_device_ctrl_instance_release, + .sysfs_ops = &device_instance_ops, + .default_groups = device_instance_groups, +}; + +/* edac_dev -> instance -> block information */ + +#define to_block(k) container_of(k, struct edac_device_block, kobj) +#define to_block_attr(a) \ + container_of(a, struct edac_dev_sysfs_block_attribute, attr) + +/* + * Set of low-level block attribute show functions + */ +static ssize_t block_ue_count_show(struct kobject *kobj, + struct attribute *attr, char *data) +{ + struct edac_device_block *block = to_block(kobj); + + return sprintf(data, "%u\n", block->counters.ue_count); +} + +static ssize_t block_ce_count_show(struct kobject *kobj, + struct attribute *attr, char *data) +{ + struct edac_device_block *block = to_block(kobj); + + return sprintf(data, "%u\n", block->counters.ce_count); +} + +/* DEVICE block kobject release() function */ +static void edac_device_ctrl_block_release(struct kobject *kobj) +{ + struct edac_device_block *block; + + edac_dbg(1, "\n"); + + /* get the container of the kobj */ + block = to_block(kobj); + + /* map from 'block kobj' to 'block->instance->controller->main_kobj' + * now 'release' the block kobject + */ + kobject_put(&block->instance->ctl->kobj); +} + + +/* Function to 'show' fields from the edac_dev 'block' structure */ +static ssize_t edac_dev_block_show(struct kobject *kobj, + struct attribute *attr, char *buffer) +{ + struct edac_dev_sysfs_block_attribute *block_attr = + to_block_attr(attr); + + if (block_attr->show) + return block_attr->show(kobj, attr, buffer); + return -EIO; +} + +/* Function to 'store' fields into the edac_dev 'block' structure */ +static ssize_t edac_dev_block_store(struct kobject *kobj, + struct attribute *attr, + const char *buffer, size_t count) +{ + struct edac_dev_sysfs_block_attribute *block_attr; + + block_attr = to_block_attr(attr); + + if (block_attr->store) + return block_attr->store(kobj, attr, buffer, count); + return -EIO; +} + +/* edac_dev file operations for a 'block' */ +static const struct sysfs_ops device_block_ops = { + .show = edac_dev_block_show, + .store = edac_dev_block_store +}; + +#define BLOCK_ATTR(_name,_mode,_show,_store) \ +static struct edac_dev_sysfs_block_attribute attr_block_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +BLOCK_ATTR(ce_count, S_IRUGO, block_ce_count_show, NULL); +BLOCK_ATTR(ue_count, S_IRUGO, block_ue_count_show, NULL); + +/* list of edac_dev 'block' attributes */ +static struct attribute *device_block_attrs[] = { + &attr_block_ce_count.attr, + &attr_block_ue_count.attr, + NULL, +}; +ATTRIBUTE_GROUPS(device_block); + +/* The 'ktype' for each edac_dev 'block' */ +static struct kobj_type ktype_block_ctrl = { + .release = edac_device_ctrl_block_release, + .sysfs_ops = &device_block_ops, + .default_groups = device_block_groups, +}; + +/* block ctor/dtor code */ + +/* + * edac_device_create_block + */ +static int edac_device_create_block(struct edac_device_ctl_info *edac_dev, + struct edac_device_instance *instance, + struct edac_device_block *block) +{ + int i; + int err; + struct edac_dev_sysfs_block_attribute *sysfs_attrib; + struct kobject *main_kobj; + + edac_dbg(4, "Instance '%s' inst_p=%p block '%s' block_p=%p\n", + instance->name, instance, block->name, block); + edac_dbg(4, "block kobj=%p block kobj->parent=%p\n", + &block->kobj, &block->kobj.parent); + + /* init this block's kobject */ + memset(&block->kobj, 0, sizeof(struct kobject)); + + /* bump the main kobject's reference count for this controller + * and this instance is dependent on the main + */ + main_kobj = kobject_get(&edac_dev->kobj); + if (!main_kobj) { + err = -ENODEV; + goto err_out; + } + + /* Add this block's kobject */ + err = kobject_init_and_add(&block->kobj, &ktype_block_ctrl, + &instance->kobj, + "%s", block->name); + if (err) { + edac_dbg(1, "Failed to register instance '%s'\n", block->name); + kobject_put(main_kobj); + err = -ENODEV; + goto err_out; + } + + /* If there are driver level block attributes, then added them + * to the block kobject + */ + sysfs_attrib = block->block_attributes; + if (sysfs_attrib && block->nr_attribs) { + for (i = 0; i < block->nr_attribs; i++, sysfs_attrib++) { + + edac_dbg(4, "creating block attrib='%s' attrib->%p to kobj=%p\n", + sysfs_attrib->attr.name, + sysfs_attrib, &block->kobj); + + /* Create each block_attribute file */ + err = sysfs_create_file(&block->kobj, + &sysfs_attrib->attr); + if (err) + goto err_on_attrib; + } + } + kobject_uevent(&block->kobj, KOBJ_ADD); + + return 0; + + /* Error unwind stack */ +err_on_attrib: + kobject_put(&block->kobj); + +err_out: + return err; +} + +/* + * edac_device_delete_block(edac_dev,block); + */ +static void edac_device_delete_block(struct edac_device_ctl_info *edac_dev, + struct edac_device_block *block) +{ + struct edac_dev_sysfs_block_attribute *sysfs_attrib; + int i; + + /* if this block has 'attributes' then we need to iterate over the list + * and 'remove' the attributes on this block + */ + sysfs_attrib = block->block_attributes; + if (sysfs_attrib && block->nr_attribs) { + for (i = 0; i < block->nr_attribs; i++, sysfs_attrib++) { + + /* remove each block_attrib file */ + sysfs_remove_file(&block->kobj, + (struct attribute *) sysfs_attrib); + } + } + + /* unregister this block's kobject, SEE: + * edac_device_ctrl_block_release() callback operation + */ + kobject_put(&block->kobj); +} + +/* instance ctor/dtor code */ + +/* + * edac_device_create_instance + * create just one instance of an edac_device 'instance' + */ +static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev, + int idx) +{ + int i, j; + int err; + struct edac_device_instance *instance; + struct kobject *main_kobj; + + instance = &edac_dev->instances[idx]; + + /* Init the instance's kobject */ + memset(&instance->kobj, 0, sizeof(struct kobject)); + + instance->ctl = edac_dev; + + /* bump the main kobject's reference count for this controller + * and this instance is dependent on the main + */ + main_kobj = kobject_get(&edac_dev->kobj); + if (!main_kobj) { + err = -ENODEV; + goto err_out; + } + + /* Formally register this instance's kobject under the edac_device */ + err = kobject_init_and_add(&instance->kobj, &ktype_instance_ctrl, + &edac_dev->kobj, "%s", instance->name); + if (err != 0) { + edac_dbg(2, "Failed to register instance '%s'\n", + instance->name); + kobject_put(main_kobj); + goto err_out; + } + + edac_dbg(4, "now register '%d' blocks for instance %d\n", + instance->nr_blocks, idx); + + /* register all blocks of this instance */ + for (i = 0; i < instance->nr_blocks; i++) { + err = edac_device_create_block(edac_dev, instance, + &instance->blocks[i]); + if (err) { + /* If any fail, remove all previous ones */ + for (j = 0; j < i; j++) + edac_device_delete_block(edac_dev, + &instance->blocks[j]); + goto err_release_instance_kobj; + } + } + kobject_uevent(&instance->kobj, KOBJ_ADD); + + edac_dbg(4, "Registered instance %d '%s' kobject\n", + idx, instance->name); + + return 0; + + /* error unwind stack */ +err_release_instance_kobj: + kobject_put(&instance->kobj); + +err_out: + return err; +} + +/* + * edac_device_remove_instance + * remove an edac_device instance + */ +static void edac_device_delete_instance(struct edac_device_ctl_info *edac_dev, + int idx) +{ + struct edac_device_instance *instance; + int i; + + instance = &edac_dev->instances[idx]; + + /* unregister all blocks in this instance */ + for (i = 0; i < instance->nr_blocks; i++) + edac_device_delete_block(edac_dev, &instance->blocks[i]); + + /* unregister this instance's kobject, SEE: + * edac_device_ctrl_instance_release() for callback operation + */ + kobject_put(&instance->kobj); +} + +/* + * edac_device_create_instances + * create the first level of 'instances' for this device + * (ie 'cache' might have 'cache0', 'cache1', 'cache2', etc + */ +static int edac_device_create_instances(struct edac_device_ctl_info *edac_dev) +{ + int i, j; + int err; + + edac_dbg(0, "\n"); + + /* iterate over creation of the instances */ + for (i = 0; i < edac_dev->nr_instances; i++) { + err = edac_device_create_instance(edac_dev, i); + if (err) { + /* unwind previous instances on error */ + for (j = 0; j < i; j++) + edac_device_delete_instance(edac_dev, j); + return err; + } + } + + return 0; +} + +/* + * edac_device_delete_instances(edac_dev); + * unregister all the kobjects of the instances + */ +static void edac_device_delete_instances(struct edac_device_ctl_info *edac_dev) +{ + int i; + + /* iterate over creation of the instances */ + for (i = 0; i < edac_dev->nr_instances; i++) + edac_device_delete_instance(edac_dev, i); +} + +/* edac_dev sysfs ctor/dtor code */ + +/* + * edac_device_add_main_sysfs_attributes + * add some attributes to this instance's main kobject + */ +static int edac_device_add_main_sysfs_attributes( + struct edac_device_ctl_info *edac_dev) +{ + struct edac_dev_sysfs_attribute *sysfs_attrib; + int err = 0; + + sysfs_attrib = edac_dev->sysfs_attributes; + if (sysfs_attrib) { + /* iterate over the array and create an attribute for each + * entry in the list + */ + while (sysfs_attrib->attr.name != NULL) { + err = sysfs_create_file(&edac_dev->kobj, + (struct attribute*) sysfs_attrib); + if (err) + goto err_out; + + sysfs_attrib++; + } + } + +err_out: + return err; +} + +/* + * edac_device_remove_main_sysfs_attributes + * remove any attributes to this instance's main kobject + */ +static void edac_device_remove_main_sysfs_attributes( + struct edac_device_ctl_info *edac_dev) +{ + struct edac_dev_sysfs_attribute *sysfs_attrib; + + /* if there are main attributes, defined, remove them. First, + * point to the start of the array and iterate over it + * removing each attribute listed from this device's instance's kobject + */ + sysfs_attrib = edac_dev->sysfs_attributes; + if (sysfs_attrib) { + while (sysfs_attrib->attr.name != NULL) { + sysfs_remove_file(&edac_dev->kobj, + (struct attribute *) sysfs_attrib); + sysfs_attrib++; + } + } +} + +/* + * edac_device_create_sysfs() Constructor + * + * accept a created edac_device control structure + * and 'export' it to sysfs. The 'main' kobj should already have been + * created. 'instance' and 'block' kobjects should be registered + * along with any 'block' attributes from the low driver. In addition, + * the main attributes (if any) are connected to the main kobject of + * the control structure. + * + * Return: + * 0 Success + * !0 Failure + */ +int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev) +{ + int err; + struct kobject *edac_kobj = &edac_dev->kobj; + + edac_dbg(0, "idx=%d\n", edac_dev->dev_idx); + + /* go create any main attributes callers wants */ + err = edac_device_add_main_sysfs_attributes(edac_dev); + if (err) { + edac_dbg(0, "failed to add sysfs attribs\n"); + goto err_out; + } + + /* create a symlink from the edac device + * to the platform 'device' being used for this + */ + err = sysfs_create_link(edac_kobj, + &edac_dev->dev->kobj, EDAC_DEVICE_SYMLINK); + if (err) { + edac_dbg(0, "sysfs_create_link() returned err= %d\n", err); + goto err_remove_main_attribs; + } + + /* Create the first level instance directories + * In turn, the nested blocks beneath the instances will + * be registered as well + */ + err = edac_device_create_instances(edac_dev); + if (err) { + edac_dbg(0, "edac_device_create_instances() returned err= %d\n", + err); + goto err_remove_link; + } + + + edac_dbg(4, "create-instances done, idx=%d\n", edac_dev->dev_idx); + + return 0; + + /* Error unwind stack */ +err_remove_link: + /* remove the sym link */ + sysfs_remove_link(&edac_dev->kobj, EDAC_DEVICE_SYMLINK); + +err_remove_main_attribs: + edac_device_remove_main_sysfs_attributes(edac_dev); + +err_out: + return err; +} + +/* + * edac_device_remove_sysfs() destructor + * + * given an edac_device struct, tear down the kobject resources + */ +void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev) +{ + edac_dbg(0, "\n"); + + /* remove any main attributes for this device */ + edac_device_remove_main_sysfs_attributes(edac_dev); + + /* remove the device sym link */ + sysfs_remove_link(&edac_dev->kobj, EDAC_DEVICE_SYMLINK); + + /* walk the instance/block kobject tree, deconstructing it */ + edac_device_delete_instances(edac_dev); +} diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c new file mode 100644 index 000000000..6faeb2ab3 --- /dev/null +++ b/drivers/edac/edac_mc.c @@ -0,0 +1,1091 @@ +/* + * edac_mc kernel module + * (C) 2005, 2006 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * Modified by Dave Peterson and Doug Thompson + * + */ + +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/sysctl.h> +#include <linux/highmem.h> +#include <linux/timer.h> +#include <linux/slab.h> +#include <linux/jiffies.h> +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/ctype.h> +#include <linux/edac.h> +#include <linux/bitops.h> +#include <linux/uaccess.h> +#include <asm/page.h> +#include "edac_mc.h" +#include "edac_module.h" +#include <ras/ras_event.h> + +#ifdef CONFIG_EDAC_ATOMIC_SCRUB +#include <asm/edac.h> +#else +#define edac_atomic_scrub(va, size) do { } while (0) +#endif + +int edac_op_state = EDAC_OPSTATE_INVAL; +EXPORT_SYMBOL_GPL(edac_op_state); + +/* lock to memory controller's control array */ +static DEFINE_MUTEX(mem_ctls_mutex); +static LIST_HEAD(mc_devices); + +/* + * Used to lock EDAC MC to just one module, avoiding two drivers e. g. + * apei/ghes and i7core_edac to be used at the same time. + */ +static const char *edac_mc_owner; + +static struct mem_ctl_info *error_desc_to_mci(struct edac_raw_error_desc *e) +{ + return container_of(e, struct mem_ctl_info, error_desc); +} + +unsigned int edac_dimm_info_location(struct dimm_info *dimm, char *buf, + unsigned int len) +{ + struct mem_ctl_info *mci = dimm->mci; + int i, n, count = 0; + char *p = buf; + + for (i = 0; i < mci->n_layers; i++) { + n = scnprintf(p, len, "%s %d ", + edac_layer_name[mci->layers[i].type], + dimm->location[i]); + p += n; + len -= n; + count += n; + } + + return count; +} + +#ifdef CONFIG_EDAC_DEBUG + +static void edac_mc_dump_channel(struct rank_info *chan) +{ + edac_dbg(4, " channel->chan_idx = %d\n", chan->chan_idx); + edac_dbg(4, " channel = %p\n", chan); + edac_dbg(4, " channel->csrow = %p\n", chan->csrow); + edac_dbg(4, " channel->dimm = %p\n", chan->dimm); +} + +static void edac_mc_dump_dimm(struct dimm_info *dimm) +{ + char location[80]; + + if (!dimm->nr_pages) + return; + + edac_dimm_info_location(dimm, location, sizeof(location)); + + edac_dbg(4, "%s%i: %smapped as virtual row %d, chan %d\n", + dimm->mci->csbased ? "rank" : "dimm", + dimm->idx, location, dimm->csrow, dimm->cschannel); + edac_dbg(4, " dimm = %p\n", dimm); + edac_dbg(4, " dimm->label = '%s'\n", dimm->label); + edac_dbg(4, " dimm->nr_pages = 0x%x\n", dimm->nr_pages); + edac_dbg(4, " dimm->grain = %d\n", dimm->grain); +} + +static void edac_mc_dump_csrow(struct csrow_info *csrow) +{ + edac_dbg(4, "csrow->csrow_idx = %d\n", csrow->csrow_idx); + edac_dbg(4, " csrow = %p\n", csrow); + edac_dbg(4, " csrow->first_page = 0x%lx\n", csrow->first_page); + edac_dbg(4, " csrow->last_page = 0x%lx\n", csrow->last_page); + edac_dbg(4, " csrow->page_mask = 0x%lx\n", csrow->page_mask); + edac_dbg(4, " csrow->nr_channels = %d\n", csrow->nr_channels); + edac_dbg(4, " csrow->channels = %p\n", csrow->channels); + edac_dbg(4, " csrow->mci = %p\n", csrow->mci); +} + +static void edac_mc_dump_mci(struct mem_ctl_info *mci) +{ + edac_dbg(3, "\tmci = %p\n", mci); + edac_dbg(3, "\tmci->mtype_cap = %lx\n", mci->mtype_cap); + edac_dbg(3, "\tmci->edac_ctl_cap = %lx\n", mci->edac_ctl_cap); + edac_dbg(3, "\tmci->edac_cap = %lx\n", mci->edac_cap); + edac_dbg(4, "\tmci->edac_check = %p\n", mci->edac_check); + edac_dbg(3, "\tmci->nr_csrows = %d, csrows = %p\n", + mci->nr_csrows, mci->csrows); + edac_dbg(3, "\tmci->nr_dimms = %d, dimms = %p\n", + mci->tot_dimms, mci->dimms); + edac_dbg(3, "\tdev = %p\n", mci->pdev); + edac_dbg(3, "\tmod_name:ctl_name = %s:%s\n", + mci->mod_name, mci->ctl_name); + edac_dbg(3, "\tpvt_info = %p\n\n", mci->pvt_info); +} + +#endif /* CONFIG_EDAC_DEBUG */ + +const char * const edac_mem_types[] = { + [MEM_EMPTY] = "Empty", + [MEM_RESERVED] = "Reserved", + [MEM_UNKNOWN] = "Unknown", + [MEM_FPM] = "FPM", + [MEM_EDO] = "EDO", + [MEM_BEDO] = "BEDO", + [MEM_SDR] = "Unbuffered-SDR", + [MEM_RDR] = "Registered-SDR", + [MEM_DDR] = "Unbuffered-DDR", + [MEM_RDDR] = "Registered-DDR", + [MEM_RMBS] = "RMBS", + [MEM_DDR2] = "Unbuffered-DDR2", + [MEM_FB_DDR2] = "FullyBuffered-DDR2", + [MEM_RDDR2] = "Registered-DDR2", + [MEM_XDR] = "XDR", + [MEM_DDR3] = "Unbuffered-DDR3", + [MEM_RDDR3] = "Registered-DDR3", + [MEM_LRDDR3] = "Load-Reduced-DDR3-RAM", + [MEM_LPDDR3] = "Low-Power-DDR3-RAM", + [MEM_DDR4] = "Unbuffered-DDR4", + [MEM_RDDR4] = "Registered-DDR4", + [MEM_LPDDR4] = "Low-Power-DDR4-RAM", + [MEM_LRDDR4] = "Load-Reduced-DDR4-RAM", + [MEM_DDR5] = "Unbuffered-DDR5", + [MEM_RDDR5] = "Registered-DDR5", + [MEM_LRDDR5] = "Load-Reduced-DDR5-RAM", + [MEM_NVDIMM] = "Non-volatile-RAM", + [MEM_WIO2] = "Wide-IO-2", + [MEM_HBM2] = "High-bandwidth-memory-Gen2", +}; +EXPORT_SYMBOL_GPL(edac_mem_types); + +static void _edac_mc_free(struct mem_ctl_info *mci) +{ + put_device(&mci->dev); +} + +static void mci_release(struct device *dev) +{ + struct mem_ctl_info *mci = container_of(dev, struct mem_ctl_info, dev); + struct csrow_info *csr; + int i, chn, row; + + if (mci->dimms) { + for (i = 0; i < mci->tot_dimms; i++) + kfree(mci->dimms[i]); + kfree(mci->dimms); + } + + if (mci->csrows) { + for (row = 0; row < mci->nr_csrows; row++) { + csr = mci->csrows[row]; + if (!csr) + continue; + + if (csr->channels) { + for (chn = 0; chn < mci->num_cschannel; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } + kfree(csr); + } + kfree(mci->csrows); + } + kfree(mci->pvt_info); + kfree(mci->layers); + kfree(mci); +} + +static int edac_mc_alloc_csrows(struct mem_ctl_info *mci) +{ + unsigned int tot_channels = mci->num_cschannel; + unsigned int tot_csrows = mci->nr_csrows; + unsigned int row, chn; + + /* + * Alocate and fill the csrow/channels structs + */ + mci->csrows = kcalloc(tot_csrows, sizeof(*mci->csrows), GFP_KERNEL); + if (!mci->csrows) + return -ENOMEM; + + for (row = 0; row < tot_csrows; row++) { + struct csrow_info *csr; + + csr = kzalloc(sizeof(**mci->csrows), GFP_KERNEL); + if (!csr) + return -ENOMEM; + + mci->csrows[row] = csr; + csr->csrow_idx = row; + csr->mci = mci; + csr->nr_channels = tot_channels; + csr->channels = kcalloc(tot_channels, sizeof(*csr->channels), + GFP_KERNEL); + if (!csr->channels) + return -ENOMEM; + + for (chn = 0; chn < tot_channels; chn++) { + struct rank_info *chan; + + chan = kzalloc(sizeof(**csr->channels), GFP_KERNEL); + if (!chan) + return -ENOMEM; + + csr->channels[chn] = chan; + chan->chan_idx = chn; + chan->csrow = csr; + } + } + + return 0; +} + +static int edac_mc_alloc_dimms(struct mem_ctl_info *mci) +{ + unsigned int pos[EDAC_MAX_LAYERS]; + unsigned int row, chn, idx; + int layer; + void *p; + + /* + * Allocate and fill the dimm structs + */ + mci->dimms = kcalloc(mci->tot_dimms, sizeof(*mci->dimms), GFP_KERNEL); + if (!mci->dimms) + return -ENOMEM; + + memset(&pos, 0, sizeof(pos)); + row = 0; + chn = 0; + for (idx = 0; idx < mci->tot_dimms; idx++) { + struct dimm_info *dimm; + struct rank_info *chan; + int n, len; + + chan = mci->csrows[row]->channels[chn]; + + dimm = kzalloc(sizeof(**mci->dimms), GFP_KERNEL); + if (!dimm) + return -ENOMEM; + mci->dimms[idx] = dimm; + dimm->mci = mci; + dimm->idx = idx; + + /* + * Copy DIMM location and initialize it. + */ + len = sizeof(dimm->label); + p = dimm->label; + n = scnprintf(p, len, "mc#%u", mci->mc_idx); + p += n; + len -= n; + for (layer = 0; layer < mci->n_layers; layer++) { + n = scnprintf(p, len, "%s#%u", + edac_layer_name[mci->layers[layer].type], + pos[layer]); + p += n; + len -= n; + dimm->location[layer] = pos[layer]; + } + + /* Link it to the csrows old API data */ + chan->dimm = dimm; + dimm->csrow = row; + dimm->cschannel = chn; + + /* Increment csrow location */ + if (mci->layers[0].is_virt_csrow) { + chn++; + if (chn == mci->num_cschannel) { + chn = 0; + row++; + } + } else { + row++; + if (row == mci->nr_csrows) { + row = 0; + chn++; + } + } + + /* Increment dimm location */ + for (layer = mci->n_layers - 1; layer >= 0; layer--) { + pos[layer]++; + if (pos[layer] < mci->layers[layer].size) + break; + pos[layer] = 0; + } + } + + return 0; +} + +struct mem_ctl_info *edac_mc_alloc(unsigned int mc_num, + unsigned int n_layers, + struct edac_mc_layer *layers, + unsigned int sz_pvt) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer *layer; + unsigned int idx, tot_dimms = 1; + unsigned int tot_csrows = 1, tot_channels = 1; + bool per_rank = false; + + if (WARN_ON(n_layers > EDAC_MAX_LAYERS || n_layers == 0)) + return NULL; + + /* + * Calculate the total amount of dimms and csrows/cschannels while + * in the old API emulation mode + */ + for (idx = 0; idx < n_layers; idx++) { + tot_dimms *= layers[idx].size; + + if (layers[idx].is_virt_csrow) + tot_csrows *= layers[idx].size; + else + tot_channels *= layers[idx].size; + + if (layers[idx].type == EDAC_MC_LAYER_CHIP_SELECT) + per_rank = true; + } + + mci = kzalloc(sizeof(struct mem_ctl_info), GFP_KERNEL); + if (!mci) + return NULL; + + mci->layers = kcalloc(n_layers, sizeof(struct edac_mc_layer), GFP_KERNEL); + if (!mci->layers) + goto error; + + mci->pvt_info = kzalloc(sz_pvt, GFP_KERNEL); + if (!mci->pvt_info) + goto error; + + mci->dev.release = mci_release; + device_initialize(&mci->dev); + + /* setup index and various internal pointers */ + mci->mc_idx = mc_num; + mci->tot_dimms = tot_dimms; + mci->n_layers = n_layers; + memcpy(mci->layers, layers, sizeof(*layer) * n_layers); + mci->nr_csrows = tot_csrows; + mci->num_cschannel = tot_channels; + mci->csbased = per_rank; + + if (edac_mc_alloc_csrows(mci)) + goto error; + + if (edac_mc_alloc_dimms(mci)) + goto error; + + mci->op_state = OP_ALLOC; + + return mci; + +error: + _edac_mc_free(mci); + + return NULL; +} +EXPORT_SYMBOL_GPL(edac_mc_alloc); + +void edac_mc_free(struct mem_ctl_info *mci) +{ + edac_dbg(1, "\n"); + + _edac_mc_free(mci); +} +EXPORT_SYMBOL_GPL(edac_mc_free); + +bool edac_has_mcs(void) +{ + bool ret; + + mutex_lock(&mem_ctls_mutex); + + ret = list_empty(&mc_devices); + + mutex_unlock(&mem_ctls_mutex); + + return !ret; +} +EXPORT_SYMBOL_GPL(edac_has_mcs); + +/* Caller must hold mem_ctls_mutex */ +static struct mem_ctl_info *__find_mci_by_dev(struct device *dev) +{ + struct mem_ctl_info *mci; + struct list_head *item; + + edac_dbg(3, "\n"); + + list_for_each(item, &mc_devices) { + mci = list_entry(item, struct mem_ctl_info, link); + + if (mci->pdev == dev) + return mci; + } + + return NULL; +} + +/** + * find_mci_by_dev + * + * scan list of controllers looking for the one that manages + * the 'dev' device + * @dev: pointer to a struct device related with the MCI + */ +struct mem_ctl_info *find_mci_by_dev(struct device *dev) +{ + struct mem_ctl_info *ret; + + mutex_lock(&mem_ctls_mutex); + ret = __find_mci_by_dev(dev); + mutex_unlock(&mem_ctls_mutex); + + return ret; +} +EXPORT_SYMBOL_GPL(find_mci_by_dev); + +/* + * edac_mc_workq_function + * performs the operation scheduled by a workq request + */ +static void edac_mc_workq_function(struct work_struct *work_req) +{ + struct delayed_work *d_work = to_delayed_work(work_req); + struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work); + + mutex_lock(&mem_ctls_mutex); + + if (mci->op_state != OP_RUNNING_POLL) { + mutex_unlock(&mem_ctls_mutex); + return; + } + + if (edac_op_state == EDAC_OPSTATE_POLL) + mci->edac_check(mci); + + mutex_unlock(&mem_ctls_mutex); + + /* Queue ourselves again. */ + edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec())); +} + +/* + * edac_mc_reset_delay_period(unsigned long value) + * + * user space has updated our poll period value, need to + * reset our workq delays + */ +void edac_mc_reset_delay_period(unsigned long value) +{ + struct mem_ctl_info *mci; + struct list_head *item; + + mutex_lock(&mem_ctls_mutex); + + list_for_each(item, &mc_devices) { + mci = list_entry(item, struct mem_ctl_info, link); + + if (mci->op_state == OP_RUNNING_POLL) + edac_mod_work(&mci->work, value); + } + mutex_unlock(&mem_ctls_mutex); +} + + + +/* Return 0 on success, 1 on failure. + * Before calling this function, caller must + * assign a unique value to mci->mc_idx. + * + * locking model: + * + * called with the mem_ctls_mutex lock held + */ +static int add_mc_to_global_list(struct mem_ctl_info *mci) +{ + struct list_head *item, *insert_before; + struct mem_ctl_info *p; + + insert_before = &mc_devices; + + p = __find_mci_by_dev(mci->pdev); + if (unlikely(p != NULL)) + goto fail0; + + list_for_each(item, &mc_devices) { + p = list_entry(item, struct mem_ctl_info, link); + + if (p->mc_idx >= mci->mc_idx) { + if (unlikely(p->mc_idx == mci->mc_idx)) + goto fail1; + + insert_before = item; + break; + } + } + + list_add_tail_rcu(&mci->link, insert_before); + return 0; + +fail0: + edac_printk(KERN_WARNING, EDAC_MC, + "%s (%s) %s %s already assigned %d\n", dev_name(p->pdev), + edac_dev_name(mci), p->mod_name, p->ctl_name, p->mc_idx); + return 1; + +fail1: + edac_printk(KERN_WARNING, EDAC_MC, + "bug in low-level driver: attempt to assign\n" + " duplicate mc_idx %d in %s()\n", p->mc_idx, __func__); + return 1; +} + +static int del_mc_from_global_list(struct mem_ctl_info *mci) +{ + list_del_rcu(&mci->link); + + /* these are for safe removal of devices from global list while + * NMI handlers may be traversing list + */ + synchronize_rcu(); + INIT_LIST_HEAD(&mci->link); + + return list_empty(&mc_devices); +} + +struct mem_ctl_info *edac_mc_find(int idx) +{ + struct mem_ctl_info *mci; + struct list_head *item; + + mutex_lock(&mem_ctls_mutex); + + list_for_each(item, &mc_devices) { + mci = list_entry(item, struct mem_ctl_info, link); + if (mci->mc_idx == idx) + goto unlock; + } + + mci = NULL; +unlock: + mutex_unlock(&mem_ctls_mutex); + return mci; +} +EXPORT_SYMBOL(edac_mc_find); + +const char *edac_get_owner(void) +{ + return edac_mc_owner; +} +EXPORT_SYMBOL_GPL(edac_get_owner); + +/* FIXME - should a warning be printed if no error detection? correction? */ +int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci, + const struct attribute_group **groups) +{ + int ret = -EINVAL; + edac_dbg(0, "\n"); + +#ifdef CONFIG_EDAC_DEBUG + if (edac_debug_level >= 3) + edac_mc_dump_mci(mci); + + if (edac_debug_level >= 4) { + struct dimm_info *dimm; + int i; + + for (i = 0; i < mci->nr_csrows; i++) { + struct csrow_info *csrow = mci->csrows[i]; + u32 nr_pages = 0; + int j; + + for (j = 0; j < csrow->nr_channels; j++) + nr_pages += csrow->channels[j]->dimm->nr_pages; + if (!nr_pages) + continue; + edac_mc_dump_csrow(csrow); + for (j = 0; j < csrow->nr_channels; j++) + if (csrow->channels[j]->dimm->nr_pages) + edac_mc_dump_channel(csrow->channels[j]); + } + + mci_for_each_dimm(mci, dimm) + edac_mc_dump_dimm(dimm); + } +#endif + mutex_lock(&mem_ctls_mutex); + + if (edac_mc_owner && edac_mc_owner != mci->mod_name) { + ret = -EPERM; + goto fail0; + } + + if (add_mc_to_global_list(mci)) + goto fail0; + + /* set load time so that error rate can be tracked */ + mci->start_time = jiffies; + + mci->bus = edac_get_sysfs_subsys(); + + if (edac_create_sysfs_mci_device(mci, groups)) { + edac_mc_printk(mci, KERN_WARNING, + "failed to create sysfs device\n"); + goto fail1; + } + + if (mci->edac_check) { + mci->op_state = OP_RUNNING_POLL; + + INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function); + edac_queue_work(&mci->work, msecs_to_jiffies(edac_mc_get_poll_msec())); + + } else { + mci->op_state = OP_RUNNING_INTERRUPT; + } + + /* Report action taken */ + edac_mc_printk(mci, KERN_INFO, + "Giving out device to module %s controller %s: DEV %s (%s)\n", + mci->mod_name, mci->ctl_name, mci->dev_name, + edac_op_state_to_string(mci->op_state)); + + edac_mc_owner = mci->mod_name; + + mutex_unlock(&mem_ctls_mutex); + return 0; + +fail1: + del_mc_from_global_list(mci); + +fail0: + mutex_unlock(&mem_ctls_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(edac_mc_add_mc_with_groups); + +struct mem_ctl_info *edac_mc_del_mc(struct device *dev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + mutex_lock(&mem_ctls_mutex); + + /* find the requested mci struct in the global list */ + mci = __find_mci_by_dev(dev); + if (mci == NULL) { + mutex_unlock(&mem_ctls_mutex); + return NULL; + } + + /* mark MCI offline: */ + mci->op_state = OP_OFFLINE; + + if (del_mc_from_global_list(mci)) + edac_mc_owner = NULL; + + mutex_unlock(&mem_ctls_mutex); + + if (mci->edac_check) + edac_stop_work(&mci->work); + + /* remove from sysfs */ + edac_remove_sysfs_mci_device(mci); + + edac_printk(KERN_INFO, EDAC_MC, + "Removed device %d for %s %s: DEV %s\n", mci->mc_idx, + mci->mod_name, mci->ctl_name, edac_dev_name(mci)); + + return mci; +} +EXPORT_SYMBOL_GPL(edac_mc_del_mc); + +static void edac_mc_scrub_block(unsigned long page, unsigned long offset, + u32 size) +{ + struct page *pg; + void *virt_addr; + unsigned long flags = 0; + + edac_dbg(3, "\n"); + + /* ECC error page was not in our memory. Ignore it. */ + if (!pfn_valid(page)) + return; + + /* Find the actual page structure then map it and fix */ + pg = pfn_to_page(page); + + if (PageHighMem(pg)) + local_irq_save(flags); + + virt_addr = kmap_atomic(pg); + + /* Perform architecture specific atomic scrub operation */ + edac_atomic_scrub(virt_addr + offset, size); + + /* Unmap and complete */ + kunmap_atomic(virt_addr); + + if (PageHighMem(pg)) + local_irq_restore(flags); +} + +/* FIXME - should return -1 */ +int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page) +{ + struct csrow_info **csrows = mci->csrows; + int row, i, j, n; + + edac_dbg(1, "MC%d: 0x%lx\n", mci->mc_idx, page); + row = -1; + + for (i = 0; i < mci->nr_csrows; i++) { + struct csrow_info *csrow = csrows[i]; + n = 0; + for (j = 0; j < csrow->nr_channels; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; + n += dimm->nr_pages; + } + if (n == 0) + continue; + + edac_dbg(3, "MC%d: first(0x%lx) page(0x%lx) last(0x%lx) mask(0x%lx)\n", + mci->mc_idx, + csrow->first_page, page, csrow->last_page, + csrow->page_mask); + + if ((page >= csrow->first_page) && + (page <= csrow->last_page) && + ((page & csrow->page_mask) == + (csrow->first_page & csrow->page_mask))) { + row = i; + break; + } + } + + if (row == -1) + edac_mc_printk(mci, KERN_ERR, + "could not look up page error address %lx\n", + (unsigned long)page); + + return row; +} +EXPORT_SYMBOL_GPL(edac_mc_find_csrow_by_page); + +const char *edac_layer_name[] = { + [EDAC_MC_LAYER_BRANCH] = "branch", + [EDAC_MC_LAYER_CHANNEL] = "channel", + [EDAC_MC_LAYER_SLOT] = "slot", + [EDAC_MC_LAYER_CHIP_SELECT] = "csrow", + [EDAC_MC_LAYER_ALL_MEM] = "memory", +}; +EXPORT_SYMBOL_GPL(edac_layer_name); + +static void edac_inc_ce_error(struct edac_raw_error_desc *e) +{ + int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer }; + struct mem_ctl_info *mci = error_desc_to_mci(e); + struct dimm_info *dimm = edac_get_dimm(mci, pos[0], pos[1], pos[2]); + + mci->ce_mc += e->error_count; + + if (dimm) + dimm->ce_count += e->error_count; + else + mci->ce_noinfo_count += e->error_count; +} + +static void edac_inc_ue_error(struct edac_raw_error_desc *e) +{ + int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer }; + struct mem_ctl_info *mci = error_desc_to_mci(e); + struct dimm_info *dimm = edac_get_dimm(mci, pos[0], pos[1], pos[2]); + + mci->ue_mc += e->error_count; + + if (dimm) + dimm->ue_count += e->error_count; + else + mci->ue_noinfo_count += e->error_count; +} + +static void edac_ce_error(struct edac_raw_error_desc *e) +{ + struct mem_ctl_info *mci = error_desc_to_mci(e); + unsigned long remapped_page; + + if (edac_mc_get_log_ce()) { + edac_mc_printk(mci, KERN_WARNING, + "%d CE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx%s%s)\n", + e->error_count, e->msg, + *e->msg ? " " : "", + e->label, e->location, e->page_frame_number, e->offset_in_page, + e->grain, e->syndrome, + *e->other_detail ? " - " : "", + e->other_detail); + } + + edac_inc_ce_error(e); + + if (mci->scrub_mode == SCRUB_SW_SRC) { + /* + * Some memory controllers (called MCs below) can remap + * memory so that it is still available at a different + * address when PCI devices map into memory. + * MC's that can't do this, lose the memory where PCI + * devices are mapped. This mapping is MC-dependent + * and so we call back into the MC driver for it to + * map the MC page to a physical (CPU) page which can + * then be mapped to a virtual page - which can then + * be scrubbed. + */ + remapped_page = mci->ctl_page_to_phys ? + mci->ctl_page_to_phys(mci, e->page_frame_number) : + e->page_frame_number; + + edac_mc_scrub_block(remapped_page, e->offset_in_page, e->grain); + } +} + +static void edac_ue_error(struct edac_raw_error_desc *e) +{ + struct mem_ctl_info *mci = error_desc_to_mci(e); + + if (edac_mc_get_log_ue()) { + edac_mc_printk(mci, KERN_WARNING, + "%d UE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld%s%s)\n", + e->error_count, e->msg, + *e->msg ? " " : "", + e->label, e->location, e->page_frame_number, e->offset_in_page, + e->grain, + *e->other_detail ? " - " : "", + e->other_detail); + } + + edac_inc_ue_error(e); + + if (edac_mc_get_panic_on_ue()) { + panic("UE %s%son %s (%s page:0x%lx offset:0x%lx grain:%ld%s%s)\n", + e->msg, + *e->msg ? " " : "", + e->label, e->location, e->page_frame_number, e->offset_in_page, + e->grain, + *e->other_detail ? " - " : "", + e->other_detail); + } +} + +static void edac_inc_csrow(struct edac_raw_error_desc *e, int row, int chan) +{ + struct mem_ctl_info *mci = error_desc_to_mci(e); + enum hw_event_mc_err_type type = e->type; + u16 count = e->error_count; + + if (row < 0) + return; + + edac_dbg(4, "csrow/channel to increment: (%d,%d)\n", row, chan); + + if (type == HW_EVENT_ERR_CORRECTED) { + mci->csrows[row]->ce_count += count; + if (chan >= 0) + mci->csrows[row]->channels[chan]->ce_count += count; + } else { + mci->csrows[row]->ue_count += count; + } +} + +void edac_raw_mc_handle_error(struct edac_raw_error_desc *e) +{ + struct mem_ctl_info *mci = error_desc_to_mci(e); + u8 grain_bits; + + /* Sanity-check driver-supplied grain value. */ + if (WARN_ON_ONCE(!e->grain)) + e->grain = 1; + + grain_bits = fls_long(e->grain - 1); + + /* Report the error via the trace interface */ + if (IS_ENABLED(CONFIG_RAS)) + trace_mc_event(e->type, e->msg, e->label, e->error_count, + mci->mc_idx, e->top_layer, e->mid_layer, + e->low_layer, + (e->page_frame_number << PAGE_SHIFT) | e->offset_in_page, + grain_bits, e->syndrome, e->other_detail); + + if (e->type == HW_EVENT_ERR_CORRECTED) + edac_ce_error(e); + else + edac_ue_error(e); +} +EXPORT_SYMBOL_GPL(edac_raw_mc_handle_error); + +void edac_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + const u16 error_count, + const unsigned long page_frame_number, + const unsigned long offset_in_page, + const unsigned long syndrome, + const int top_layer, + const int mid_layer, + const int low_layer, + const char *msg, + const char *other_detail) +{ + struct dimm_info *dimm; + char *p, *end; + int row = -1, chan = -1; + int pos[EDAC_MAX_LAYERS] = { top_layer, mid_layer, low_layer }; + int i, n_labels = 0; + struct edac_raw_error_desc *e = &mci->error_desc; + bool any_memory = true; + const char *prefix; + + edac_dbg(3, "MC%d\n", mci->mc_idx); + + /* Fills the error report buffer */ + memset(e, 0, sizeof (*e)); + e->error_count = error_count; + e->type = type; + e->top_layer = top_layer; + e->mid_layer = mid_layer; + e->low_layer = low_layer; + e->page_frame_number = page_frame_number; + e->offset_in_page = offset_in_page; + e->syndrome = syndrome; + /* need valid strings here for both: */ + e->msg = msg ?: ""; + e->other_detail = other_detail ?: ""; + + /* + * Check if the event report is consistent and if the memory location is + * known. If it is, the DIMM(s) label info will be filled and the DIMM's + * error counters will be incremented. + */ + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] >= (int)mci->layers[i].size) { + + edac_mc_printk(mci, KERN_ERR, + "INTERNAL ERROR: %s value is out of range (%d >= %d)\n", + edac_layer_name[mci->layers[i].type], + pos[i], mci->layers[i].size); + /* + * Instead of just returning it, let's use what's + * known about the error. The increment routines and + * the DIMM filter logic will do the right thing by + * pointing the likely damaged DIMMs. + */ + pos[i] = -1; + } + if (pos[i] >= 0) + any_memory = false; + } + + /* + * Get the dimm label/grain that applies to the match criteria. + * As the error algorithm may not be able to point to just one memory + * stick, the logic here will get all possible labels that could + * pottentially be affected by the error. + * On FB-DIMM memory controllers, for uncorrected errors, it is common + * to have only the MC channel and the MC dimm (also called "branch") + * but the channel is not known, as the memory is arranged in pairs, + * where each memory belongs to a separate channel within the same + * branch. + */ + p = e->label; + *p = '\0'; + end = p + sizeof(e->label); + prefix = ""; + + mci_for_each_dimm(mci, dimm) { + if (top_layer >= 0 && top_layer != dimm->location[0]) + continue; + if (mid_layer >= 0 && mid_layer != dimm->location[1]) + continue; + if (low_layer >= 0 && low_layer != dimm->location[2]) + continue; + + /* get the max grain, over the error match range */ + if (dimm->grain > e->grain) + e->grain = dimm->grain; + + /* + * If the error is memory-controller wide, there's no need to + * seek for the affected DIMMs because the whole channel/memory + * controller/... may be affected. Also, don't show errors for + * empty DIMM slots. + */ + if (!dimm->nr_pages) + continue; + + n_labels++; + if (n_labels > EDAC_MAX_LABELS) { + p = e->label; + *p = '\0'; + } else { + p += scnprintf(p, end - p, "%s%s", prefix, dimm->label); + prefix = OTHER_LABEL; + } + + /* + * get csrow/channel of the DIMM, in order to allow + * incrementing the compat API counters + */ + edac_dbg(4, "%s csrows map: (%d,%d)\n", + mci->csbased ? "rank" : "dimm", + dimm->csrow, dimm->cschannel); + if (row == -1) + row = dimm->csrow; + else if (row >= 0 && row != dimm->csrow) + row = -2; + + if (chan == -1) + chan = dimm->cschannel; + else if (chan >= 0 && chan != dimm->cschannel) + chan = -2; + } + + if (any_memory) + strscpy(e->label, "any memory", sizeof(e->label)); + else if (!*e->label) + strscpy(e->label, "unknown memory", sizeof(e->label)); + + edac_inc_csrow(e, row, chan); + + /* Fill the RAM location data */ + p = e->location; + end = p + sizeof(e->location); + prefix = ""; + + for (i = 0; i < mci->n_layers; i++) { + if (pos[i] < 0) + continue; + + p += scnprintf(p, end - p, "%s%s:%d", prefix, + edac_layer_name[mci->layers[i].type], pos[i]); + prefix = " "; + } + + edac_raw_mc_handle_error(e); +} +EXPORT_SYMBOL_GPL(edac_mc_handle_error); diff --git a/drivers/edac/edac_mc.h b/drivers/edac/edac_mc.h new file mode 100644 index 000000000..881b00ead --- /dev/null +++ b/drivers/edac/edac_mc.h @@ -0,0 +1,258 @@ +/* + * Defines, structures, APIs for edac_mc module + * + * (C) 2007 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * NMI handling support added by + * Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com> + * + * Refactored for multi-source files: + * Doug Thompson <norsk5@xmission.com> + * + * Please look at Documentation/driver-api/edac.rst for more info about + * EDAC core structs and functions. + */ + +#ifndef _EDAC_MC_H_ +#define _EDAC_MC_H_ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/smp.h> +#include <linux/pci.h> +#include <linux/time.h> +#include <linux/nmi.h> +#include <linux/rcupdate.h> +#include <linux/completion.h> +#include <linux/kobject.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/edac.h> + +#if PAGE_SHIFT < 20 +#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT)) +#define MiB_TO_PAGES(mb) ((mb) << (20 - PAGE_SHIFT)) +#else /* PAGE_SHIFT > 20 */ +#define PAGES_TO_MiB(pages) ((pages) << (PAGE_SHIFT - 20)) +#define MiB_TO_PAGES(mb) ((mb) >> (PAGE_SHIFT - 20)) +#endif + +#define edac_printk(level, prefix, fmt, arg...) \ + printk(level "EDAC " prefix ": " fmt, ##arg) + +#define edac_mc_printk(mci, level, fmt, arg...) \ + printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg) + +#define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \ + printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg) + +#define edac_device_printk(ctl, level, fmt, arg...) \ + printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg) + +#define edac_pci_printk(ctl, level, fmt, arg...) \ + printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg) + +/* prefixes for edac_printk() and edac_mc_printk() */ +#define EDAC_MC "MC" +#define EDAC_PCI "PCI" +#define EDAC_DEBUG "DEBUG" + +extern const char * const edac_mem_types[]; + +#ifdef CONFIG_EDAC_DEBUG +extern int edac_debug_level; + +#define edac_dbg(level, fmt, ...) \ +do { \ + if (level <= edac_debug_level) \ + edac_printk(KERN_DEBUG, EDAC_DEBUG, \ + "%s: " fmt, __func__, ##__VA_ARGS__); \ +} while (0) + +#else /* !CONFIG_EDAC_DEBUG */ + +#define edac_dbg(level, fmt, ...) \ +do { \ + if (0) \ + edac_printk(KERN_DEBUG, EDAC_DEBUG, \ + "%s: " fmt, __func__, ##__VA_ARGS__); \ +} while (0) + +#endif /* !CONFIG_EDAC_DEBUG */ + +#define PCI_VEND_DEV(vend, dev) PCI_VENDOR_ID_ ## vend, \ + PCI_DEVICE_ID_ ## vend ## _ ## dev + +#define edac_dev_name(dev) (dev)->dev_name + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +/** + * edac_mc_alloc() - Allocate and partially fill a struct &mem_ctl_info. + * + * @mc_num: Memory controller number + * @n_layers: Number of MC hierarchy layers + * @layers: Describes each layer as seen by the Memory Controller + * @sz_pvt: size of private storage needed + * + * + * Everything is kmalloc'ed as one big chunk - more efficient. + * Only can be used if all structures have the same lifetime - otherwise + * you have to allocate and initialize your own structures. + * + * Use edac_mc_free() to free mc structures allocated by this function. + * + * .. note:: + * + * drivers handle multi-rank memories in different ways: in some + * drivers, one multi-rank memory stick is mapped as one entry, while, in + * others, a single multi-rank memory stick would be mapped into several + * entries. Currently, this function will allocate multiple struct dimm_info + * on such scenarios, as grouping the multiple ranks require drivers change. + * + * Returns: + * On success, return a pointer to struct mem_ctl_info pointer; + * %NULL otherwise + */ +struct mem_ctl_info *edac_mc_alloc(unsigned int mc_num, + unsigned int n_layers, + struct edac_mc_layer *layers, + unsigned int sz_pvt); + +/** + * edac_get_owner - Return the owner's mod_name of EDAC MC + * + * Returns: + * Pointer to mod_name string when EDAC MC is owned. NULL otherwise. + */ +extern const char *edac_get_owner(void); + +/* + * edac_mc_add_mc_with_groups() - Insert the @mci structure into the mci + * global list and create sysfs entries associated with @mci structure. + * + * @mci: pointer to the mci structure to be added to the list + * @groups: optional attribute groups for the driver-specific sysfs entries + * + * Returns: + * 0 on Success, or an error code on failure + */ +extern int edac_mc_add_mc_with_groups(struct mem_ctl_info *mci, + const struct attribute_group **groups); +#define edac_mc_add_mc(mci) edac_mc_add_mc_with_groups(mci, NULL) + +/** + * edac_mc_free() - Frees a previously allocated @mci structure + * + * @mci: pointer to a struct mem_ctl_info structure + */ +extern void edac_mc_free(struct mem_ctl_info *mci); + +/** + * edac_has_mcs() - Check if any MCs have been allocated. + * + * Returns: + * True if MC instances have been registered successfully. + * False otherwise. + */ +extern bool edac_has_mcs(void); + +/** + * edac_mc_find() - Search for a mem_ctl_info structure whose index is @idx. + * + * @idx: index to be seek + * + * If found, return a pointer to the structure. + * Else return NULL. + */ +extern struct mem_ctl_info *edac_mc_find(int idx); + +/** + * find_mci_by_dev() - Scan list of controllers looking for the one that + * manages the @dev device. + * + * @dev: pointer to a struct device related with the MCI + * + * Returns: on success, returns a pointer to struct &mem_ctl_info; + * %NULL otherwise. + */ +extern struct mem_ctl_info *find_mci_by_dev(struct device *dev); + +/** + * edac_mc_del_mc() - Remove sysfs entries for mci structure associated with + * @dev and remove mci structure from global list. + * + * @dev: Pointer to struct &device representing mci structure to remove. + * + * Returns: pointer to removed mci structure, or %NULL if device not found. + */ +extern struct mem_ctl_info *edac_mc_del_mc(struct device *dev); + +/** + * edac_mc_find_csrow_by_page() - Ancillary routine to identify what csrow + * contains a memory page. + * + * @mci: pointer to a struct mem_ctl_info structure + * @page: memory page to find + * + * Returns: on success, returns the csrow. -1 if not found. + */ +extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, + unsigned long page); + +/** + * edac_raw_mc_handle_error() - Reports a memory event to userspace without + * doing anything to discover the error location. + * + * @e: error description + * + * This raw function is used internally by edac_mc_handle_error(). It should + * only be called directly when the hardware error come directly from BIOS, + * like in the case of APEI GHES driver. + */ +void edac_raw_mc_handle_error(struct edac_raw_error_desc *e); + +/** + * edac_mc_handle_error() - Reports a memory event to userspace. + * + * @type: severity of the error (CE/UE/Fatal) + * @mci: a struct mem_ctl_info pointer + * @error_count: Number of errors of the same type + * @page_frame_number: mem page where the error occurred + * @offset_in_page: offset of the error inside the page + * @syndrome: ECC syndrome + * @top_layer: Memory layer[0] position + * @mid_layer: Memory layer[1] position + * @low_layer: Memory layer[2] position + * @msg: Message meaningful to the end users that + * explains the event + * @other_detail: Technical details about the event that + * may help hardware manufacturers and + * EDAC developers to analyse the event + */ +void edac_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + const u16 error_count, + const unsigned long page_frame_number, + const unsigned long offset_in_page, + const unsigned long syndrome, + const int top_layer, + const int mid_layer, + const int low_layer, + const char *msg, + const char *other_detail); + +/* + * edac misc APIs + */ +extern char *edac_op_state_to_string(int op_state); + +#endif /* _EDAC_MC_H_ */ diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c new file mode 100644 index 000000000..15f63452a --- /dev/null +++ b/drivers/edac/edac_mc_sysfs.c @@ -0,0 +1,1055 @@ +/* + * edac_mc kernel module + * (C) 2005-2007 Linux Networx (http://lnxi.com) + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written Doug Thompson <norsk5@xmission.com> www.softwarebitmaker.com + * + * (c) 2012-2013 - Mauro Carvalho Chehab + * The entire API were re-written, and ported to use struct device + * + */ + +#include <linux/ctype.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include <linux/bug.h> +#include <linux/pm_runtime.h> +#include <linux/uaccess.h> + +#include "edac_mc.h" +#include "edac_module.h" + +/* MC EDAC Controls, setable by module parameter, and sysfs */ +static int edac_mc_log_ue = 1; +static int edac_mc_log_ce = 1; +static int edac_mc_panic_on_ue; +static unsigned int edac_mc_poll_msec = 1000; + +/* Getter functions for above */ +int edac_mc_get_log_ue(void) +{ + return edac_mc_log_ue; +} + +int edac_mc_get_log_ce(void) +{ + return edac_mc_log_ce; +} + +int edac_mc_get_panic_on_ue(void) +{ + return edac_mc_panic_on_ue; +} + +/* this is temporary */ +unsigned int edac_mc_get_poll_msec(void) +{ + return edac_mc_poll_msec; +} + +static int edac_set_poll_msec(const char *val, const struct kernel_param *kp) +{ + unsigned int i; + int ret; + + if (!val) + return -EINVAL; + + ret = kstrtouint(val, 0, &i); + if (ret) + return ret; + + if (i < 1000) + return -EINVAL; + + *((unsigned int *)kp->arg) = i; + + /* notify edac_mc engine to reset the poll period */ + edac_mc_reset_delay_period(i); + + return 0; +} + +/* Parameter declarations for above */ +module_param(edac_mc_panic_on_ue, int, 0644); +MODULE_PARM_DESC(edac_mc_panic_on_ue, "Panic on uncorrected error: 0=off 1=on"); +module_param(edac_mc_log_ue, int, 0644); +MODULE_PARM_DESC(edac_mc_log_ue, + "Log uncorrectable error to console: 0=off 1=on"); +module_param(edac_mc_log_ce, int, 0644); +MODULE_PARM_DESC(edac_mc_log_ce, + "Log correctable error to console: 0=off 1=on"); +module_param_call(edac_mc_poll_msec, edac_set_poll_msec, param_get_uint, + &edac_mc_poll_msec, 0644); +MODULE_PARM_DESC(edac_mc_poll_msec, "Polling period in milliseconds"); + +static struct device *mci_pdev; + +/* + * various constants for Memory Controllers + */ +static const char * const dev_types[] = { + [DEV_UNKNOWN] = "Unknown", + [DEV_X1] = "x1", + [DEV_X2] = "x2", + [DEV_X4] = "x4", + [DEV_X8] = "x8", + [DEV_X16] = "x16", + [DEV_X32] = "x32", + [DEV_X64] = "x64" +}; + +static const char * const edac_caps[] = { + [EDAC_UNKNOWN] = "Unknown", + [EDAC_NONE] = "None", + [EDAC_RESERVED] = "Reserved", + [EDAC_PARITY] = "PARITY", + [EDAC_EC] = "EC", + [EDAC_SECDED] = "SECDED", + [EDAC_S2ECD2ED] = "S2ECD2ED", + [EDAC_S4ECD4ED] = "S4ECD4ED", + [EDAC_S8ECD8ED] = "S8ECD8ED", + [EDAC_S16ECD16ED] = "S16ECD16ED" +}; + +#ifdef CONFIG_EDAC_LEGACY_SYSFS +/* + * EDAC sysfs CSROW data structures and methods + */ + +#define to_csrow(k) container_of(k, struct csrow_info, dev) + +/* + * We need it to avoid namespace conflicts between the legacy API + * and the per-dimm/per-rank one + */ +#define DEVICE_ATTR_LEGACY(_name, _mode, _show, _store) \ + static struct device_attribute dev_attr_legacy_##_name = __ATTR(_name, _mode, _show, _store) + +struct dev_ch_attribute { + struct device_attribute attr; + unsigned int channel; +}; + +#define DEVICE_CHANNEL(_name, _mode, _show, _store, _var) \ + static struct dev_ch_attribute dev_attr_legacy_##_name = \ + { __ATTR(_name, _mode, _show, _store), (_var) } + +#define to_channel(k) (container_of(k, struct dev_ch_attribute, attr)->channel) + +/* Set of more default csrow<id> attribute show/store functions */ +static ssize_t csrow_ue_count_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + + return sprintf(data, "%u\n", csrow->ue_count); +} + +static ssize_t csrow_ce_count_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + + return sprintf(data, "%u\n", csrow->ce_count); +} + +static ssize_t csrow_size_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + int i; + u32 nr_pages = 0; + + for (i = 0; i < csrow->nr_channels; i++) + nr_pages += csrow->channels[i]->dimm->nr_pages; + return sprintf(data, "%u\n", PAGES_TO_MiB(nr_pages)); +} + +static ssize_t csrow_mem_type_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + + return sprintf(data, "%s\n", edac_mem_types[csrow->channels[0]->dimm->mtype]); +} + +static ssize_t csrow_dev_type_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + + return sprintf(data, "%s\n", dev_types[csrow->channels[0]->dimm->dtype]); +} + +static ssize_t csrow_edac_mode_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + + return sprintf(data, "%s\n", edac_caps[csrow->channels[0]->dimm->edac_mode]); +} + +/* show/store functions for DIMM Label attributes */ +static ssize_t channel_dimm_label_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + unsigned int chan = to_channel(mattr); + struct rank_info *rank = csrow->channels[chan]; + + /* if field has not been initialized, there is nothing to send */ + if (!rank->dimm->label[0]) + return 0; + + return snprintf(data, sizeof(rank->dimm->label) + 1, "%s\n", + rank->dimm->label); +} + +static ssize_t channel_dimm_label_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct csrow_info *csrow = to_csrow(dev); + unsigned int chan = to_channel(mattr); + struct rank_info *rank = csrow->channels[chan]; + size_t copy_count = count; + + if (count == 0) + return -EINVAL; + + if (data[count - 1] == '\0' || data[count - 1] == '\n') + copy_count -= 1; + + if (copy_count == 0 || copy_count >= sizeof(rank->dimm->label)) + return -EINVAL; + + strncpy(rank->dimm->label, data, copy_count); + rank->dimm->label[copy_count] = '\0'; + + return count; +} + +/* show function for dynamic chX_ce_count attribute */ +static ssize_t channel_ce_count_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct csrow_info *csrow = to_csrow(dev); + unsigned int chan = to_channel(mattr); + struct rank_info *rank = csrow->channels[chan]; + + return sprintf(data, "%u\n", rank->ce_count); +} + +/* cwrow<id>/attribute files */ +DEVICE_ATTR_LEGACY(size_mb, S_IRUGO, csrow_size_show, NULL); +DEVICE_ATTR_LEGACY(dev_type, S_IRUGO, csrow_dev_type_show, NULL); +DEVICE_ATTR_LEGACY(mem_type, S_IRUGO, csrow_mem_type_show, NULL); +DEVICE_ATTR_LEGACY(edac_mode, S_IRUGO, csrow_edac_mode_show, NULL); +DEVICE_ATTR_LEGACY(ue_count, S_IRUGO, csrow_ue_count_show, NULL); +DEVICE_ATTR_LEGACY(ce_count, S_IRUGO, csrow_ce_count_show, NULL); + +/* default attributes of the CSROW<id> object */ +static struct attribute *csrow_attrs[] = { + &dev_attr_legacy_dev_type.attr, + &dev_attr_legacy_mem_type.attr, + &dev_attr_legacy_edac_mode.attr, + &dev_attr_legacy_size_mb.attr, + &dev_attr_legacy_ue_count.attr, + &dev_attr_legacy_ce_count.attr, + NULL, +}; + +static const struct attribute_group csrow_attr_grp = { + .attrs = csrow_attrs, +}; + +static const struct attribute_group *csrow_attr_groups[] = { + &csrow_attr_grp, + NULL +}; + +static const struct device_type csrow_attr_type = { + .groups = csrow_attr_groups, +}; + +/* + * possible dynamic channel DIMM Label attribute files + * + */ +DEVICE_CHANNEL(ch0_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 0); +DEVICE_CHANNEL(ch1_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 1); +DEVICE_CHANNEL(ch2_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 2); +DEVICE_CHANNEL(ch3_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 3); +DEVICE_CHANNEL(ch4_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 4); +DEVICE_CHANNEL(ch5_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 5); +DEVICE_CHANNEL(ch6_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 6); +DEVICE_CHANNEL(ch7_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 7); +DEVICE_CHANNEL(ch8_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 8); +DEVICE_CHANNEL(ch9_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 9); +DEVICE_CHANNEL(ch10_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 10); +DEVICE_CHANNEL(ch11_dimm_label, S_IRUGO | S_IWUSR, + channel_dimm_label_show, channel_dimm_label_store, 11); + +/* Total possible dynamic DIMM Label attribute file table */ +static struct attribute *dynamic_csrow_dimm_attr[] = { + &dev_attr_legacy_ch0_dimm_label.attr.attr, + &dev_attr_legacy_ch1_dimm_label.attr.attr, + &dev_attr_legacy_ch2_dimm_label.attr.attr, + &dev_attr_legacy_ch3_dimm_label.attr.attr, + &dev_attr_legacy_ch4_dimm_label.attr.attr, + &dev_attr_legacy_ch5_dimm_label.attr.attr, + &dev_attr_legacy_ch6_dimm_label.attr.attr, + &dev_attr_legacy_ch7_dimm_label.attr.attr, + &dev_attr_legacy_ch8_dimm_label.attr.attr, + &dev_attr_legacy_ch9_dimm_label.attr.attr, + &dev_attr_legacy_ch10_dimm_label.attr.attr, + &dev_attr_legacy_ch11_dimm_label.attr.attr, + NULL +}; + +/* possible dynamic channel ce_count attribute files */ +DEVICE_CHANNEL(ch0_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 0); +DEVICE_CHANNEL(ch1_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 1); +DEVICE_CHANNEL(ch2_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 2); +DEVICE_CHANNEL(ch3_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 3); +DEVICE_CHANNEL(ch4_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 4); +DEVICE_CHANNEL(ch5_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 5); +DEVICE_CHANNEL(ch6_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 6); +DEVICE_CHANNEL(ch7_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 7); +DEVICE_CHANNEL(ch8_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 8); +DEVICE_CHANNEL(ch9_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 9); +DEVICE_CHANNEL(ch10_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 10); +DEVICE_CHANNEL(ch11_ce_count, S_IRUGO, + channel_ce_count_show, NULL, 11); + +/* Total possible dynamic ce_count attribute file table */ +static struct attribute *dynamic_csrow_ce_count_attr[] = { + &dev_attr_legacy_ch0_ce_count.attr.attr, + &dev_attr_legacy_ch1_ce_count.attr.attr, + &dev_attr_legacy_ch2_ce_count.attr.attr, + &dev_attr_legacy_ch3_ce_count.attr.attr, + &dev_attr_legacy_ch4_ce_count.attr.attr, + &dev_attr_legacy_ch5_ce_count.attr.attr, + &dev_attr_legacy_ch6_ce_count.attr.attr, + &dev_attr_legacy_ch7_ce_count.attr.attr, + &dev_attr_legacy_ch8_ce_count.attr.attr, + &dev_attr_legacy_ch9_ce_count.attr.attr, + &dev_attr_legacy_ch10_ce_count.attr.attr, + &dev_attr_legacy_ch11_ce_count.attr.attr, + NULL +}; + +static umode_t csrow_dev_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct csrow_info *csrow = container_of(dev, struct csrow_info, dev); + + if (idx >= csrow->nr_channels) + return 0; + + if (idx >= ARRAY_SIZE(dynamic_csrow_ce_count_attr) - 1) { + WARN_ONCE(1, "idx: %d\n", idx); + return 0; + } + + /* Only expose populated DIMMs */ + if (!csrow->channels[idx]->dimm->nr_pages) + return 0; + + return attr->mode; +} + + +static const struct attribute_group csrow_dev_dimm_group = { + .attrs = dynamic_csrow_dimm_attr, + .is_visible = csrow_dev_is_visible, +}; + +static const struct attribute_group csrow_dev_ce_count_group = { + .attrs = dynamic_csrow_ce_count_attr, + .is_visible = csrow_dev_is_visible, +}; + +static const struct attribute_group *csrow_dev_groups[] = { + &csrow_dev_dimm_group, + &csrow_dev_ce_count_group, + NULL +}; + +static void csrow_release(struct device *dev) +{ + /* + * Nothing to do, just unregister sysfs here. The mci + * device owns the data and will also release it. + */ +} + +static inline int nr_pages_per_csrow(struct csrow_info *csrow) +{ + int chan, nr_pages = 0; + + for (chan = 0; chan < csrow->nr_channels; chan++) + nr_pages += csrow->channels[chan]->dimm->nr_pages; + + return nr_pages; +} + +/* Create a CSROW object under specifed edac_mc_device */ +static int edac_create_csrow_object(struct mem_ctl_info *mci, + struct csrow_info *csrow, int index) +{ + int err; + + csrow->dev.type = &csrow_attr_type; + csrow->dev.groups = csrow_dev_groups; + csrow->dev.release = csrow_release; + device_initialize(&csrow->dev); + csrow->dev.parent = &mci->dev; + csrow->mci = mci; + dev_set_name(&csrow->dev, "csrow%d", index); + dev_set_drvdata(&csrow->dev, csrow); + + err = device_add(&csrow->dev); + if (err) { + edac_dbg(1, "failure: create device %s\n", dev_name(&csrow->dev)); + put_device(&csrow->dev); + return err; + } + + edac_dbg(0, "device %s created\n", dev_name(&csrow->dev)); + + return 0; +} + +/* Create a CSROW object under specifed edac_mc_device */ +static int edac_create_csrow_objects(struct mem_ctl_info *mci) +{ + int err, i; + struct csrow_info *csrow; + + for (i = 0; i < mci->nr_csrows; i++) { + csrow = mci->csrows[i]; + if (!nr_pages_per_csrow(csrow)) + continue; + err = edac_create_csrow_object(mci, mci->csrows[i], i); + if (err < 0) + goto error; + } + return 0; + +error: + for (--i; i >= 0; i--) { + if (device_is_registered(&mci->csrows[i]->dev)) + device_unregister(&mci->csrows[i]->dev); + } + + return err; +} + +static void edac_delete_csrow_objects(struct mem_ctl_info *mci) +{ + int i; + + for (i = 0; i < mci->nr_csrows; i++) { + if (device_is_registered(&mci->csrows[i]->dev)) + device_unregister(&mci->csrows[i]->dev); + } +} + +#endif + +/* + * Per-dimm (or per-rank) devices + */ + +#define to_dimm(k) container_of(k, struct dimm_info, dev) + +/* show/store functions for DIMM Label attributes */ +static ssize_t dimmdev_location_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + ssize_t count; + + count = edac_dimm_info_location(dimm, data, PAGE_SIZE); + count += scnprintf(data + count, PAGE_SIZE - count, "\n"); + + return count; +} + +static ssize_t dimmdev_label_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + /* if field has not been initialized, there is nothing to send */ + if (!dimm->label[0]) + return 0; + + return snprintf(data, sizeof(dimm->label) + 1, "%s\n", dimm->label); +} + +static ssize_t dimmdev_label_store(struct device *dev, + struct device_attribute *mattr, + const char *data, + size_t count) +{ + struct dimm_info *dimm = to_dimm(dev); + size_t copy_count = count; + + if (count == 0) + return -EINVAL; + + if (data[count - 1] == '\0' || data[count - 1] == '\n') + copy_count -= 1; + + if (copy_count == 0 || copy_count >= sizeof(dimm->label)) + return -EINVAL; + + strncpy(dimm->label, data, copy_count); + dimm->label[copy_count] = '\0'; + + return count; +} + +static ssize_t dimmdev_size_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%u\n", PAGES_TO_MiB(dimm->nr_pages)); +} + +static ssize_t dimmdev_mem_type_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%s\n", edac_mem_types[dimm->mtype]); +} + +static ssize_t dimmdev_dev_type_show(struct device *dev, + struct device_attribute *mattr, char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%s\n", dev_types[dimm->dtype]); +} + +static ssize_t dimmdev_edac_mode_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%s\n", edac_caps[dimm->edac_mode]); +} + +static ssize_t dimmdev_ce_count_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%u\n", dimm->ce_count); +} + +static ssize_t dimmdev_ue_count_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct dimm_info *dimm = to_dimm(dev); + + return sprintf(data, "%u\n", dimm->ue_count); +} + +/* dimm/rank attribute files */ +static DEVICE_ATTR(dimm_label, S_IRUGO | S_IWUSR, + dimmdev_label_show, dimmdev_label_store); +static DEVICE_ATTR(dimm_location, S_IRUGO, dimmdev_location_show, NULL); +static DEVICE_ATTR(size, S_IRUGO, dimmdev_size_show, NULL); +static DEVICE_ATTR(dimm_mem_type, S_IRUGO, dimmdev_mem_type_show, NULL); +static DEVICE_ATTR(dimm_dev_type, S_IRUGO, dimmdev_dev_type_show, NULL); +static DEVICE_ATTR(dimm_edac_mode, S_IRUGO, dimmdev_edac_mode_show, NULL); +static DEVICE_ATTR(dimm_ce_count, S_IRUGO, dimmdev_ce_count_show, NULL); +static DEVICE_ATTR(dimm_ue_count, S_IRUGO, dimmdev_ue_count_show, NULL); + +/* attributes of the dimm<id>/rank<id> object */ +static struct attribute *dimm_attrs[] = { + &dev_attr_dimm_label.attr, + &dev_attr_dimm_location.attr, + &dev_attr_size.attr, + &dev_attr_dimm_mem_type.attr, + &dev_attr_dimm_dev_type.attr, + &dev_attr_dimm_edac_mode.attr, + &dev_attr_dimm_ce_count.attr, + &dev_attr_dimm_ue_count.attr, + NULL, +}; + +static const struct attribute_group dimm_attr_grp = { + .attrs = dimm_attrs, +}; + +static const struct attribute_group *dimm_attr_groups[] = { + &dimm_attr_grp, + NULL +}; + +static const struct device_type dimm_attr_type = { + .groups = dimm_attr_groups, +}; + +static void dimm_release(struct device *dev) +{ + /* + * Nothing to do, just unregister sysfs here. The mci + * device owns the data and will also release it. + */ +} + +/* Create a DIMM object under specifed memory controller device */ +static int edac_create_dimm_object(struct mem_ctl_info *mci, + struct dimm_info *dimm) +{ + int err; + dimm->mci = mci; + + dimm->dev.type = &dimm_attr_type; + dimm->dev.release = dimm_release; + device_initialize(&dimm->dev); + + dimm->dev.parent = &mci->dev; + if (mci->csbased) + dev_set_name(&dimm->dev, "rank%d", dimm->idx); + else + dev_set_name(&dimm->dev, "dimm%d", dimm->idx); + dev_set_drvdata(&dimm->dev, dimm); + pm_runtime_forbid(&mci->dev); + + err = device_add(&dimm->dev); + if (err) { + edac_dbg(1, "failure: create device %s\n", dev_name(&dimm->dev)); + put_device(&dimm->dev); + return err; + } + + if (IS_ENABLED(CONFIG_EDAC_DEBUG)) { + char location[80]; + + edac_dimm_info_location(dimm, location, sizeof(location)); + edac_dbg(0, "device %s created at location %s\n", + dev_name(&dimm->dev), location); + } + + return 0; +} + +/* + * Memory controller device + */ + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +static ssize_t mci_reset_counters_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct dimm_info *dimm; + int row, chan; + + mci->ue_mc = 0; + mci->ce_mc = 0; + mci->ue_noinfo_count = 0; + mci->ce_noinfo_count = 0; + + for (row = 0; row < mci->nr_csrows; row++) { + struct csrow_info *ri = mci->csrows[row]; + + ri->ue_count = 0; + ri->ce_count = 0; + + for (chan = 0; chan < ri->nr_channels; chan++) + ri->channels[chan]->ce_count = 0; + } + + mci_for_each_dimm(mci, dimm) { + dimm->ue_count = 0; + dimm->ce_count = 0; + } + + mci->start_time = jiffies; + return count; +} + +/* Memory scrubbing interface: + * + * A MC driver can limit the scrubbing bandwidth based on the CPU type. + * Therefore, ->set_sdram_scrub_rate should be made to return the actual + * bandwidth that is accepted or 0 when scrubbing is to be disabled. + * + * Negative value still means that an error has occurred while setting + * the scrub rate. + */ +static ssize_t mci_sdram_scrub_rate_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + unsigned long bandwidth = 0; + int new_bw = 0; + + if (kstrtoul(data, 10, &bandwidth) < 0) + return -EINVAL; + + new_bw = mci->set_sdram_scrub_rate(mci, bandwidth); + if (new_bw < 0) { + edac_printk(KERN_WARNING, EDAC_MC, + "Error setting scrub rate to: %lu\n", bandwidth); + return -EINVAL; + } + + return count; +} + +/* + * ->get_sdram_scrub_rate() return value semantics same as above. + */ +static ssize_t mci_sdram_scrub_rate_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + int bandwidth = 0; + + bandwidth = mci->get_sdram_scrub_rate(mci); + if (bandwidth < 0) { + edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n"); + return bandwidth; + } + + return sprintf(data, "%d\n", bandwidth); +} + +/* default attribute files for the MCI object */ +static ssize_t mci_ue_count_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%u\n", mci->ue_mc); +} + +static ssize_t mci_ce_count_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%u\n", mci->ce_mc); +} + +static ssize_t mci_ce_noinfo_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%u\n", mci->ce_noinfo_count); +} + +static ssize_t mci_ue_noinfo_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%u\n", mci->ue_noinfo_count); +} + +static ssize_t mci_seconds_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%ld\n", (jiffies - mci->start_time) / HZ); +} + +static ssize_t mci_ctl_name_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + + return sprintf(data, "%s\n", mci->ctl_name); +} + +static ssize_t mci_size_mb_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + int total_pages = 0, csrow_idx, j; + + for (csrow_idx = 0; csrow_idx < mci->nr_csrows; csrow_idx++) { + struct csrow_info *csrow = mci->csrows[csrow_idx]; + + for (j = 0; j < csrow->nr_channels; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; + + total_pages += dimm->nr_pages; + } + } + + return sprintf(data, "%u\n", PAGES_TO_MiB(total_pages)); +} + +static ssize_t mci_max_location_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + int len = PAGE_SIZE; + char *p = data; + int i, n; + + for (i = 0; i < mci->n_layers; i++) { + n = scnprintf(p, len, "%s %d ", + edac_layer_name[mci->layers[i].type], + mci->layers[i].size - 1); + len -= n; + if (len <= 0) + goto out; + + p += n; + } + + p += scnprintf(p, len, "\n"); +out: + return p - data; +} + +/* default Control file */ +static DEVICE_ATTR(reset_counters, S_IWUSR, NULL, mci_reset_counters_store); + +/* default Attribute files */ +static DEVICE_ATTR(mc_name, S_IRUGO, mci_ctl_name_show, NULL); +static DEVICE_ATTR(size_mb, S_IRUGO, mci_size_mb_show, NULL); +static DEVICE_ATTR(seconds_since_reset, S_IRUGO, mci_seconds_show, NULL); +static DEVICE_ATTR(ue_noinfo_count, S_IRUGO, mci_ue_noinfo_show, NULL); +static DEVICE_ATTR(ce_noinfo_count, S_IRUGO, mci_ce_noinfo_show, NULL); +static DEVICE_ATTR(ue_count, S_IRUGO, mci_ue_count_show, NULL); +static DEVICE_ATTR(ce_count, S_IRUGO, mci_ce_count_show, NULL); +static DEVICE_ATTR(max_location, S_IRUGO, mci_max_location_show, NULL); + +/* memory scrubber attribute file */ +static DEVICE_ATTR(sdram_scrub_rate, 0, mci_sdram_scrub_rate_show, + mci_sdram_scrub_rate_store); /* umode set later in is_visible */ + +static struct attribute *mci_attrs[] = { + &dev_attr_reset_counters.attr, + &dev_attr_mc_name.attr, + &dev_attr_size_mb.attr, + &dev_attr_seconds_since_reset.attr, + &dev_attr_ue_noinfo_count.attr, + &dev_attr_ce_noinfo_count.attr, + &dev_attr_ue_count.attr, + &dev_attr_ce_count.attr, + &dev_attr_max_location.attr, + &dev_attr_sdram_scrub_rate.attr, + NULL +}; + +static umode_t mci_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int idx) +{ + struct device *dev = kobj_to_dev(kobj); + struct mem_ctl_info *mci = to_mci(dev); + umode_t mode = 0; + + if (attr != &dev_attr_sdram_scrub_rate.attr) + return attr->mode; + if (mci->get_sdram_scrub_rate) + mode |= S_IRUGO; + if (mci->set_sdram_scrub_rate) + mode |= S_IWUSR; + return mode; +} + +static const struct attribute_group mci_attr_grp = { + .attrs = mci_attrs, + .is_visible = mci_attr_is_visible, +}; + +static const struct attribute_group *mci_attr_groups[] = { + &mci_attr_grp, + NULL +}; + +static const struct device_type mci_attr_type = { + .groups = mci_attr_groups, +}; + +/* + * Create a new Memory Controller kobject instance, + * mc<id> under the 'mc' directory + * + * Return: + * 0 Success + * !0 Failure + */ +int edac_create_sysfs_mci_device(struct mem_ctl_info *mci, + const struct attribute_group **groups) +{ + struct dimm_info *dimm; + int err; + + /* get the /sys/devices/system/edac subsys reference */ + mci->dev.type = &mci_attr_type; + mci->dev.parent = mci_pdev; + mci->dev.groups = groups; + dev_set_name(&mci->dev, "mc%d", mci->mc_idx); + dev_set_drvdata(&mci->dev, mci); + pm_runtime_forbid(&mci->dev); + + err = device_add(&mci->dev); + if (err < 0) { + edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev)); + /* no put_device() here, free mci with _edac_mc_free() */ + return err; + } + + edac_dbg(0, "device %s created\n", dev_name(&mci->dev)); + + /* + * Create the dimm/rank devices + */ + mci_for_each_dimm(mci, dimm) { + /* Only expose populated DIMMs */ + if (!dimm->nr_pages) + continue; + + err = edac_create_dimm_object(mci, dimm); + if (err) + goto fail; + } + +#ifdef CONFIG_EDAC_LEGACY_SYSFS + err = edac_create_csrow_objects(mci); + if (err < 0) + goto fail; +#endif + + edac_create_debugfs_nodes(mci); + return 0; + +fail: + edac_remove_sysfs_mci_device(mci); + + return err; +} + +/* + * remove a Memory Controller instance + */ +void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci) +{ + struct dimm_info *dimm; + + if (!device_is_registered(&mci->dev)) + return; + + edac_dbg(0, "\n"); + +#ifdef CONFIG_EDAC_DEBUG + edac_debugfs_remove_recursive(mci->debugfs); +#endif +#ifdef CONFIG_EDAC_LEGACY_SYSFS + edac_delete_csrow_objects(mci); +#endif + + mci_for_each_dimm(mci, dimm) { + if (!device_is_registered(&dimm->dev)) + continue; + edac_dbg(1, "unregistering device %s\n", dev_name(&dimm->dev)); + device_unregister(&dimm->dev); + } + + /* only remove the device, but keep mci */ + device_del(&mci->dev); +} + +static void mc_attr_release(struct device *dev) +{ + /* + * There's no container structure here, as this is just the mci + * parent device, used to create the /sys/devices/mc sysfs node. + * So, there are no attributes on it. + */ + edac_dbg(1, "device %s released\n", dev_name(dev)); + kfree(dev); +} + +/* + * Init/exit code for the module. Basically, creates/removes /sys/class/rc + */ +int __init edac_mc_sysfs_init(void) +{ + int err; + + mci_pdev = kzalloc(sizeof(*mci_pdev), GFP_KERNEL); + if (!mci_pdev) + return -ENOMEM; + + mci_pdev->bus = edac_get_sysfs_subsys(); + mci_pdev->release = mc_attr_release; + mci_pdev->init_name = "mc"; + + err = device_register(mci_pdev); + if (err < 0) { + edac_dbg(1, "failure: create device %s\n", dev_name(mci_pdev)); + put_device(mci_pdev); + return err; + } + + edac_dbg(0, "device %s created\n", dev_name(mci_pdev)); + + return 0; +} + +void edac_mc_sysfs_exit(void) +{ + device_unregister(mci_pdev); +} diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c new file mode 100644 index 000000000..32a931d0c --- /dev/null +++ b/drivers/edac/edac_module.c @@ -0,0 +1,168 @@ +/* + * edac_module.c + * + * (C) 2007 www.softwarebitmaker.com + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Author: Doug Thompson <dougthompson@xmission.com> + * + */ +#include <linux/edac.h> + +#include "edac_mc.h" +#include "edac_module.h" + +#define EDAC_VERSION "Ver: 3.0.0" + +#ifdef CONFIG_EDAC_DEBUG + +static int edac_set_debug_level(const char *buf, + const struct kernel_param *kp) +{ + unsigned long val; + int ret; + + ret = kstrtoul(buf, 0, &val); + if (ret) + return ret; + + if (val > 4) + return -EINVAL; + + return param_set_int(buf, kp); +} + +/* Values of 0 to 4 will generate output */ +int edac_debug_level = 2; +EXPORT_SYMBOL_GPL(edac_debug_level); + +module_param_call(edac_debug_level, edac_set_debug_level, param_get_int, + &edac_debug_level, 0644); +MODULE_PARM_DESC(edac_debug_level, "EDAC debug level: [0-4], default: 2"); +#endif + +/* + * edac_op_state_to_string() + */ +char *edac_op_state_to_string(int opstate) +{ + if (opstate == OP_RUNNING_POLL) + return "POLLED"; + else if (opstate == OP_RUNNING_INTERRUPT) + return "INTERRUPT"; + else if (opstate == OP_RUNNING_POLL_INTR) + return "POLL-INTR"; + else if (opstate == OP_ALLOC) + return "ALLOC"; + else if (opstate == OP_OFFLINE) + return "OFFLINE"; + + return "UNKNOWN"; +} + +/* + * sysfs object: /sys/devices/system/edac + * need to export to other files + */ +static struct bus_type edac_subsys = { + .name = "edac", + .dev_name = "edac", +}; + +static int edac_subsys_init(void) +{ + int err; + + /* create the /sys/devices/system/edac directory */ + err = subsys_system_register(&edac_subsys, NULL); + if (err) + printk(KERN_ERR "Error registering toplevel EDAC sysfs dir\n"); + + return err; +} + +static void edac_subsys_exit(void) +{ + bus_unregister(&edac_subsys); +} + +/* return pointer to the 'edac' node in sysfs */ +struct bus_type *edac_get_sysfs_subsys(void) +{ + return &edac_subsys; +} +EXPORT_SYMBOL_GPL(edac_get_sysfs_subsys); +/* + * edac_init + * module initialization entry point + */ +static int __init edac_init(void) +{ + int err = 0; + + edac_printk(KERN_INFO, EDAC_MC, EDAC_VERSION "\n"); + + err = edac_subsys_init(); + if (err) + return err; + + /* + * Harvest and clear any boot/initialization PCI parity errors + * + * FIXME: This only clears errors logged by devices present at time of + * module initialization. We should also do an initial clear + * of each newly hotplugged device. + */ + edac_pci_clear_parity_errors(); + + err = edac_mc_sysfs_init(); + if (err) + goto err_sysfs; + + edac_debugfs_init(); + + err = edac_workqueue_setup(); + if (err) { + edac_printk(KERN_ERR, EDAC_MC, "Failure initializing workqueue\n"); + goto err_wq; + } + + return 0; + +err_wq: + edac_debugfs_exit(); + edac_mc_sysfs_exit(); + +err_sysfs: + edac_subsys_exit(); + + return err; +} + +/* + * edac_exit() + * module exit/termination function + */ +static void __exit edac_exit(void) +{ + edac_dbg(0, "\n"); + + /* tear down the various subsystems */ + edac_workqueue_teardown(); + edac_mc_sysfs_exit(); + edac_debugfs_exit(); + edac_subsys_exit(); +} + +/* + * Inform the kernel of our entry and exit points + */ +subsys_initcall(edac_init); +module_exit(edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Doug Thompson www.softwarebitmaker.com, et al"); +MODULE_DESCRIPTION("Core library routines for EDAC reporting"); diff --git a/drivers/edac/edac_module.h b/drivers/edac/edac_module.h new file mode 100644 index 000000000..4ed24d664 --- /dev/null +++ b/drivers/edac/edac_module.h @@ -0,0 +1,124 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * edac_module.h + * + * For defining functions/data for within the EDAC_CORE module only + * + * written by doug thompson <norsk5@xmission.h> + */ + +#ifndef __EDAC_MODULE_H__ +#define __EDAC_MODULE_H__ + +#include "edac_mc.h" +#include "edac_pci.h" +#include "edac_device.h" + +/* + * INTERNAL EDAC MODULE: + * EDAC memory controller sysfs create/remove functions + * and setup/teardown functions + * + * edac_mc objects + */ + /* on edac_mc_sysfs.c */ +int edac_mc_sysfs_init(void); +void edac_mc_sysfs_exit(void); +extern int edac_create_sysfs_mci_device(struct mem_ctl_info *mci, + const struct attribute_group **groups); +extern void edac_remove_sysfs_mci_device(struct mem_ctl_info *mci); +extern int edac_mc_get_log_ue(void); +extern int edac_mc_get_log_ce(void); +extern int edac_mc_get_panic_on_ue(void); +extern unsigned int edac_mc_get_poll_msec(void); + +unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf, + unsigned len); + + /* on edac_device.c */ +extern int edac_device_register_sysfs_main_kobj( + struct edac_device_ctl_info *edac_dev); +extern void edac_device_unregister_sysfs_main_kobj( + struct edac_device_ctl_info *edac_dev); +extern int edac_device_create_sysfs(struct edac_device_ctl_info *edac_dev); +extern void edac_device_remove_sysfs(struct edac_device_ctl_info *edac_dev); + +/* edac core workqueue: single CPU mode */ +int edac_workqueue_setup(void); +void edac_workqueue_teardown(void); +bool edac_queue_work(struct delayed_work *work, unsigned long delay); +bool edac_stop_work(struct delayed_work *work); +bool edac_mod_work(struct delayed_work *work, unsigned long delay); + +extern void edac_device_reset_delay_period(struct edac_device_ctl_info + *edac_dev, unsigned long msec); +extern void edac_mc_reset_delay_period(unsigned long value); + +/* + * EDAC debugfs functions + */ + +#define edac_debugfs_remove_recursive debugfs_remove_recursive +#define edac_debugfs_remove debugfs_remove +#ifdef CONFIG_EDAC_DEBUG +void edac_debugfs_init(void); +void edac_debugfs_exit(void); +void edac_create_debugfs_nodes(struct mem_ctl_info *mci); +struct dentry *edac_debugfs_create_dir(const char *dirname); +struct dentry * +edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent); +struct dentry * +edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent, + void *data, const struct file_operations *fops); +void edac_debugfs_create_x8(const char *name, umode_t mode, + struct dentry *parent, u8 *value); +void edac_debugfs_create_x16(const char *name, umode_t mode, + struct dentry *parent, u16 *value); +void edac_debugfs_create_x32(const char *name, umode_t mode, + struct dentry *parent, u32 *value); +#else +static inline void edac_debugfs_init(void) { } +static inline void edac_debugfs_exit(void) { } +static inline void edac_create_debugfs_nodes(struct mem_ctl_info *mci) { } +static inline struct dentry *edac_debugfs_create_dir(const char *dirname) { return NULL; } +static inline struct dentry * +edac_debugfs_create_dir_at(const char *dirname, struct dentry *parent) { return NULL; } +static inline struct dentry * +edac_debugfs_create_file(const char *name, umode_t mode, struct dentry *parent, + void *data, const struct file_operations *fops) { return NULL; } +static inline void edac_debugfs_create_x8(const char *name, umode_t mode, + struct dentry *parent, u8 *value) { } +static inline void edac_debugfs_create_x16(const char *name, umode_t mode, + struct dentry *parent, u16 *value) { } +static inline void edac_debugfs_create_x32(const char *name, umode_t mode, + struct dentry *parent, u32 *value) { } +#endif + +/* + * EDAC PCI functions + */ +#ifdef CONFIG_PCI +extern void edac_pci_do_parity_check(void); +extern void edac_pci_clear_parity_errors(void); +extern int edac_sysfs_pci_setup(void); +extern void edac_sysfs_pci_teardown(void); +extern int edac_pci_get_check_errors(void); +extern int edac_pci_get_poll_msec(void); +extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci); +extern void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg); +extern void edac_pci_handle_npe(struct edac_pci_ctl_info *pci, + const char *msg); +#else /* CONFIG_PCI */ +/* pre-process these away */ +#define edac_pci_do_parity_check() +#define edac_pci_clear_parity_errors() +#define edac_sysfs_pci_setup() (0) +#define edac_sysfs_pci_teardown() +#define edac_pci_get_check_errors() +#define edac_pci_get_poll_msec() +#define edac_pci_handle_pe() +#define edac_pci_handle_npe() +#endif /* CONFIG_PCI */ + +#endif /* __EDAC_MODULE_H__ */ diff --git a/drivers/edac/edac_pci.c b/drivers/edac/edac_pci.c new file mode 100644 index 000000000..64c142aec --- /dev/null +++ b/drivers/edac/edac_pci.c @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * EDAC PCI component + * + * Author: Dave Jiang <djiang@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. + */ +#include <asm/page.h> +#include <linux/uaccess.h> +#include <linux/ctype.h> +#include <linux/highmem.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/smp.h> +#include <linux/spinlock.h> +#include <linux/sysctl.h> +#include <linux/timer.h> + +#include "edac_pci.h" +#include "edac_module.h" + +static DEFINE_MUTEX(edac_pci_ctls_mutex); +static LIST_HEAD(edac_pci_list); +static atomic_t pci_indexes = ATOMIC_INIT(0); + +struct edac_pci_ctl_info *edac_pci_alloc_ctl_info(unsigned int sz_pvt, + const char *edac_pci_name) +{ + struct edac_pci_ctl_info *pci; + + edac_dbg(1, "\n"); + + pci = kzalloc(sizeof(struct edac_pci_ctl_info), GFP_KERNEL); + if (!pci) + return NULL; + + if (sz_pvt) { + pci->pvt_info = kzalloc(sz_pvt, GFP_KERNEL); + if (!pci->pvt_info) + goto free; + } + + pci->op_state = OP_ALLOC; + + snprintf(pci->name, strlen(edac_pci_name) + 1, "%s", edac_pci_name); + + return pci; + +free: + kfree(pci); + return NULL; +} +EXPORT_SYMBOL_GPL(edac_pci_alloc_ctl_info); + +void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci) +{ + edac_dbg(1, "\n"); + + edac_pci_remove_sysfs(pci); +} +EXPORT_SYMBOL_GPL(edac_pci_free_ctl_info); + +/* + * find_edac_pci_by_dev() + * scans the edac_pci list for a specific 'struct device *' + * + * return NULL if not found, or return control struct pointer + */ +static struct edac_pci_ctl_info *find_edac_pci_by_dev(struct device *dev) +{ + struct edac_pci_ctl_info *pci; + struct list_head *item; + + edac_dbg(1, "\n"); + + list_for_each(item, &edac_pci_list) { + pci = list_entry(item, struct edac_pci_ctl_info, link); + + if (pci->dev == dev) + return pci; + } + + return NULL; +} + +/* + * add_edac_pci_to_global_list + * Before calling this function, caller must assign a unique value to + * edac_dev->pci_idx. + * Return: + * 0 on success + * 1 on failure + */ +static int add_edac_pci_to_global_list(struct edac_pci_ctl_info *pci) +{ + struct list_head *item, *insert_before; + struct edac_pci_ctl_info *rover; + + edac_dbg(1, "\n"); + + insert_before = &edac_pci_list; + + /* Determine if already on the list */ + rover = find_edac_pci_by_dev(pci->dev); + if (unlikely(rover != NULL)) + goto fail0; + + /* Insert in ascending order by 'pci_idx', so find position */ + list_for_each(item, &edac_pci_list) { + rover = list_entry(item, struct edac_pci_ctl_info, link); + + if (rover->pci_idx >= pci->pci_idx) { + if (unlikely(rover->pci_idx == pci->pci_idx)) + goto fail1; + + insert_before = item; + break; + } + } + + list_add_tail_rcu(&pci->link, insert_before); + return 0; + +fail0: + edac_printk(KERN_WARNING, EDAC_PCI, + "%s (%s) %s %s already assigned %d\n", + dev_name(rover->dev), edac_dev_name(rover), + rover->mod_name, rover->ctl_name, rover->pci_idx); + return 1; + +fail1: + edac_printk(KERN_WARNING, EDAC_PCI, + "but in low-level driver: attempt to assign\n" + "\tduplicate pci_idx %d in %s()\n", rover->pci_idx, + __func__); + return 1; +} + +/* + * del_edac_pci_from_global_list + * + * remove the PCI control struct from the global list + */ +static void del_edac_pci_from_global_list(struct edac_pci_ctl_info *pci) +{ + list_del_rcu(&pci->link); + + /* these are for safe removal of devices from global list while + * NMI handlers may be traversing list + */ + synchronize_rcu(); + INIT_LIST_HEAD(&pci->link); +} + +/* + * edac_pci_workq_function() + * + * periodic function that performs the operation + * scheduled by a workq request, for a given PCI control struct + */ +static void edac_pci_workq_function(struct work_struct *work_req) +{ + struct delayed_work *d_work = to_delayed_work(work_req); + struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work); + int msec; + unsigned long delay; + + edac_dbg(3, "checking\n"); + + mutex_lock(&edac_pci_ctls_mutex); + + if (pci->op_state != OP_RUNNING_POLL) { + mutex_unlock(&edac_pci_ctls_mutex); + return; + } + + if (edac_pci_get_check_errors()) + pci->edac_check(pci); + + /* if we are on a one second period, then use round */ + msec = edac_pci_get_poll_msec(); + if (msec == 1000) + delay = round_jiffies_relative(msecs_to_jiffies(msec)); + else + delay = msecs_to_jiffies(msec); + + edac_queue_work(&pci->work, delay); + + mutex_unlock(&edac_pci_ctls_mutex); +} + +int edac_pci_alloc_index(void) +{ + return atomic_inc_return(&pci_indexes) - 1; +} +EXPORT_SYMBOL_GPL(edac_pci_alloc_index); + +int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx) +{ + edac_dbg(0, "\n"); + + pci->pci_idx = edac_idx; + pci->start_time = jiffies; + + mutex_lock(&edac_pci_ctls_mutex); + + if (add_edac_pci_to_global_list(pci)) + goto fail0; + + if (edac_pci_create_sysfs(pci)) { + edac_pci_printk(pci, KERN_WARNING, + "failed to create sysfs pci\n"); + goto fail1; + } + + if (pci->edac_check) { + pci->op_state = OP_RUNNING_POLL; + + INIT_DELAYED_WORK(&pci->work, edac_pci_workq_function); + edac_queue_work(&pci->work, msecs_to_jiffies(edac_pci_get_poll_msec())); + + } else { + pci->op_state = OP_RUNNING_INTERRUPT; + } + + edac_pci_printk(pci, KERN_INFO, + "Giving out device to module %s controller %s: DEV %s (%s)\n", + pci->mod_name, pci->ctl_name, pci->dev_name, + edac_op_state_to_string(pci->op_state)); + + mutex_unlock(&edac_pci_ctls_mutex); + return 0; + + /* error unwind stack */ +fail1: + del_edac_pci_from_global_list(pci); +fail0: + mutex_unlock(&edac_pci_ctls_mutex); + return 1; +} +EXPORT_SYMBOL_GPL(edac_pci_add_device); + +struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev) +{ + struct edac_pci_ctl_info *pci; + + edac_dbg(0, "\n"); + + mutex_lock(&edac_pci_ctls_mutex); + + /* ensure the control struct is on the global list + * if not, then leave + */ + pci = find_edac_pci_by_dev(dev); + if (pci == NULL) { + mutex_unlock(&edac_pci_ctls_mutex); + return NULL; + } + + pci->op_state = OP_OFFLINE; + + del_edac_pci_from_global_list(pci); + + mutex_unlock(&edac_pci_ctls_mutex); + + if (pci->edac_check) + edac_stop_work(&pci->work); + + edac_printk(KERN_INFO, EDAC_PCI, + "Removed device %d for %s %s: DEV %s\n", + pci->pci_idx, pci->mod_name, pci->ctl_name, edac_dev_name(pci)); + + return pci; +} +EXPORT_SYMBOL_GPL(edac_pci_del_device); + +/* + * edac_pci_generic_check + * + * a Generic parity check API + */ +static void edac_pci_generic_check(struct edac_pci_ctl_info *pci) +{ + edac_dbg(4, "\n"); + edac_pci_do_parity_check(); +} + +/* free running instance index counter */ +static int edac_pci_idx; +#define EDAC_PCI_GENCTL_NAME "EDAC PCI controller" + +struct edac_pci_gen_data { + int edac_idx; +}; + +struct edac_pci_ctl_info *edac_pci_create_generic_ctl(struct device *dev, + const char *mod_name) +{ + struct edac_pci_ctl_info *pci; + struct edac_pci_gen_data *pdata; + + pci = edac_pci_alloc_ctl_info(sizeof(*pdata), EDAC_PCI_GENCTL_NAME); + if (!pci) + return NULL; + + pdata = pci->pvt_info; + pci->dev = dev; + dev_set_drvdata(pci->dev, pci); + pci->dev_name = pci_name(to_pci_dev(dev)); + + pci->mod_name = mod_name; + pci->ctl_name = EDAC_PCI_GENCTL_NAME; + if (edac_op_state == EDAC_OPSTATE_POLL) + pci->edac_check = edac_pci_generic_check; + + pdata->edac_idx = edac_pci_idx++; + + if (edac_pci_add_device(pci, pdata->edac_idx) > 0) { + edac_dbg(3, "failed edac_pci_add_device()\n"); + edac_pci_free_ctl_info(pci); + return NULL; + } + + return pci; +} +EXPORT_SYMBOL_GPL(edac_pci_create_generic_ctl); + +void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci) +{ + edac_dbg(0, "pci mod=%s\n", pci->mod_name); + + edac_pci_del_device(pci->dev); + edac_pci_free_ctl_info(pci); +} +EXPORT_SYMBOL_GPL(edac_pci_release_generic_ctl); diff --git a/drivers/edac/edac_pci.h b/drivers/edac/edac_pci.h new file mode 100644 index 000000000..5175f5724 --- /dev/null +++ b/drivers/edac/edac_pci.h @@ -0,0 +1,271 @@ +/* + * Defines, structures, APIs for edac_pci and edac_pci_sysfs + * + * (C) 2007 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Based on work by Dan Hollis <goemon at anime dot net> and others. + * http://www.anime.net/~goemon/linux-ecc/ + * + * NMI handling support added by + * Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com> + * + * Refactored for multi-source files: + * Doug Thompson <norsk5@xmission.com> + * + * Please look at Documentation/driver-api/edac.rst for more info about + * EDAC core structs and functions. + */ + +#ifndef _EDAC_PCI_H_ +#define _EDAC_PCI_H_ + +#include <linux/completion.h> +#include <linux/device.h> +#include <linux/edac.h> +#include <linux/kobject.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#ifdef CONFIG_PCI + +struct edac_pci_counter { + atomic_t pe_count; + atomic_t npe_count; +}; + +/* + * Abstract edac_pci control info structure + * + */ +struct edac_pci_ctl_info { + /* for global list of edac_pci_ctl_info structs */ + struct list_head link; + + int pci_idx; + + struct bus_type *edac_subsys; /* pointer to subsystem */ + + /* the internal state of this controller instance */ + int op_state; + /* work struct for this instance */ + struct delayed_work work; + + /* pointer to edac polling checking routine: + * If NOT NULL: points to polling check routine + * If NULL: Then assumes INTERRUPT operation, where + * MC driver will receive events + */ + void (*edac_check) (struct edac_pci_ctl_info * edac_dev); + + struct device *dev; /* pointer to device structure */ + + const char *mod_name; /* module name */ + const char *ctl_name; /* edac controller name */ + const char *dev_name; /* pci/platform/etc... name */ + + void *pvt_info; /* pointer to 'private driver' info */ + + unsigned long start_time; /* edac_pci load start time (jiffies) */ + + struct completion complete; + + /* sysfs top name under 'edac' directory + * and instance name: + * cpu/cpu0/... + * cpu/cpu1/... + * cpu/cpu2/... + * ... + */ + char name[EDAC_DEVICE_NAME_LEN + 1]; + + /* Event counters for the this whole EDAC Device */ + struct edac_pci_counter counters; + + /* edac sysfs device control for the 'name' + * device this structure controls + */ + struct kobject kobj; +}; + +#define to_edac_pci_ctl_work(w) \ + container_of(w, struct edac_pci_ctl_info,work) + +/* write all or some bits in a byte-register*/ +static inline void pci_write_bits8(struct pci_dev *pdev, int offset, u8 value, + u8 mask) +{ + if (mask != 0xff) { + u8 buf; + + pci_read_config_byte(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_byte(pdev, offset, value); +} + +/* write all or some bits in a word-register*/ +static inline void pci_write_bits16(struct pci_dev *pdev, int offset, + u16 value, u16 mask) +{ + if (mask != 0xffff) { + u16 buf; + + pci_read_config_word(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_word(pdev, offset, value); +} + +/* + * pci_write_bits32 + * + * edac local routine to do pci_write_config_dword, but adds + * a mask parameter. If mask is all ones, ignore the mask. + * Otherwise utilize the mask to isolate specified bits + * + * write all or some bits in a dword-register + */ +static inline void pci_write_bits32(struct pci_dev *pdev, int offset, + u32 value, u32 mask) +{ + if (mask != 0xffffffff) { + u32 buf; + + pci_read_config_dword(pdev, offset, &buf); + value &= mask; + buf &= ~mask; + value |= buf; + } + + pci_write_config_dword(pdev, offset, value); +} + +#endif /* CONFIG_PCI */ + +/* + * edac_pci APIs + */ + +/** + * edac_pci_alloc_ctl_info: + * The alloc() function for the 'edac_pci' control info + * structure. + * + * @sz_pvt: size of the private info at struct &edac_pci_ctl_info + * @edac_pci_name: name of the PCI device + * + * The chip driver will allocate one of these for each + * edac_pci it is going to control/register with the EDAC CORE. + * + * Returns: a pointer to struct &edac_pci_ctl_info on success; %NULL otherwise. + */ +extern struct edac_pci_ctl_info *edac_pci_alloc_ctl_info(unsigned int sz_pvt, + const char *edac_pci_name); + +/** + * edac_pci_free_ctl_info(): + * Last action on the pci control structure. + * + * @pci: pointer to struct &edac_pci_ctl_info + * + * Calls the remove sysfs information, which will unregister + * this control struct's kobj. When that kobj's ref count + * goes to zero, its release function will be call and then + * kfree() the memory. + */ +extern void edac_pci_free_ctl_info(struct edac_pci_ctl_info *pci); + +/** + * edac_pci_alloc_index: Allocate a unique PCI index number + * + * Returns: + * allocated index number + * + */ +extern int edac_pci_alloc_index(void); + +/** + * edac_pci_add_device(): Insert the 'edac_dev' structure into the + * edac_pci global list and create sysfs entries associated with + * edac_pci structure. + * + * @pci: pointer to the edac_device structure to be added to the list + * @edac_idx: A unique numeric identifier to be assigned to the + * 'edac_pci' structure. + * + * Returns: + * 0 on Success, or an error code on failure + */ +extern int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx); + +/** + * edac_pci_del_device() + * Remove sysfs entries for specified edac_pci structure and + * then remove edac_pci structure from global list + * + * @dev: + * Pointer to 'struct device' representing edac_pci structure + * to remove + * + * Returns: + * Pointer to removed edac_pci structure, + * or %NULL if device not found + */ +extern struct edac_pci_ctl_info *edac_pci_del_device(struct device *dev); + +/** + * edac_pci_create_generic_ctl() + * A generic constructor for a PCI parity polling device + * Some systems have more than one domain of PCI busses. + * For systems with one domain, then this API will + * provide for a generic poller. + * + * @dev: pointer to struct &device; + * @mod_name: name of the PCI device + * + * This routine calls the edac_pci_alloc_ctl_info() for + * the generic device, with default values + * + * Returns: Pointer to struct &edac_pci_ctl_info on success, %NULL on + * failure. + */ +extern struct edac_pci_ctl_info *edac_pci_create_generic_ctl( + struct device *dev, + const char *mod_name); + +/** + * edac_pci_release_generic_ctl + * The release function of a generic EDAC PCI polling device + * + * @pci: pointer to struct &edac_pci_ctl_info + */ +extern void edac_pci_release_generic_ctl(struct edac_pci_ctl_info *pci); + +/** + * edac_pci_create_sysfs + * Create the controls/attributes for the specified EDAC PCI device + * + * @pci: pointer to struct &edac_pci_ctl_info + */ +extern int edac_pci_create_sysfs(struct edac_pci_ctl_info *pci); + +/** + * edac_pci_remove_sysfs() + * remove the controls and attributes for this EDAC PCI device + * + * @pci: pointer to struct &edac_pci_ctl_info + */ +extern void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci); + +#endif diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c new file mode 100644 index 000000000..888d5728e --- /dev/null +++ b/drivers/edac/edac_pci_sysfs.c @@ -0,0 +1,739 @@ +/* + * (C) 2005, 2006 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written Doug Thompson <norsk5@xmission.com> + * + */ +#include <linux/module.h> +#include <linux/edac.h> +#include <linux/slab.h> +#include <linux/ctype.h> + +#include "edac_pci.h" +#include "edac_module.h" + +#define EDAC_PCI_SYMLINK "device" + +/* data variables exported via sysfs */ +static int check_pci_errors; /* default NO check PCI parity */ +static int edac_pci_panic_on_pe; /* default NO panic on PCI Parity */ +static int edac_pci_log_pe = 1; /* log PCI parity errors */ +static int edac_pci_log_npe = 1; /* log PCI non-parity error errors */ +static int edac_pci_poll_msec = 1000; /* one second workq period */ + +static atomic_t pci_parity_count = ATOMIC_INIT(0); +static atomic_t pci_nonparity_count = ATOMIC_INIT(0); + +static struct kobject *edac_pci_top_main_kobj; +static atomic_t edac_pci_sysfs_refcount = ATOMIC_INIT(0); + +/* getter functions for the data variables */ +int edac_pci_get_check_errors(void) +{ + return check_pci_errors; +} + +static int edac_pci_get_log_pe(void) +{ + return edac_pci_log_pe; +} + +static int edac_pci_get_log_npe(void) +{ + return edac_pci_log_npe; +} + +static int edac_pci_get_panic_on_pe(void) +{ + return edac_pci_panic_on_pe; +} + +int edac_pci_get_poll_msec(void) +{ + return edac_pci_poll_msec; +} + +/**************************** EDAC PCI sysfs instance *******************/ +static ssize_t instance_pe_count_show(struct edac_pci_ctl_info *pci, char *data) +{ + return sprintf(data, "%u\n", atomic_read(&pci->counters.pe_count)); +} + +static ssize_t instance_npe_count_show(struct edac_pci_ctl_info *pci, + char *data) +{ + return sprintf(data, "%u\n", atomic_read(&pci->counters.npe_count)); +} + +#define to_instance(k) container_of(k, struct edac_pci_ctl_info, kobj) +#define to_instance_attr(a) container_of(a, struct instance_attribute, attr) + +/* DEVICE instance kobject release() function */ +static void edac_pci_instance_release(struct kobject *kobj) +{ + struct edac_pci_ctl_info *pci; + + edac_dbg(0, "\n"); + + /* Form pointer to containing struct, the pci control struct */ + pci = to_instance(kobj); + + /* decrement reference count on top main kobj */ + kobject_put(edac_pci_top_main_kobj); + + kfree(pci); /* Free the control struct */ +} + +/* instance specific attribute structure */ +struct instance_attribute { + struct attribute attr; + ssize_t(*show) (struct edac_pci_ctl_info *, char *); + ssize_t(*store) (struct edac_pci_ctl_info *, const char *, size_t); +}; + +/* Function to 'show' fields from the edac_pci 'instance' structure */ +static ssize_t edac_pci_instance_show(struct kobject *kobj, + struct attribute *attr, char *buffer) +{ + struct edac_pci_ctl_info *pci = to_instance(kobj); + struct instance_attribute *instance_attr = to_instance_attr(attr); + + if (instance_attr->show) + return instance_attr->show(pci, buffer); + return -EIO; +} + +/* Function to 'store' fields into the edac_pci 'instance' structure */ +static ssize_t edac_pci_instance_store(struct kobject *kobj, + struct attribute *attr, + const char *buffer, size_t count) +{ + struct edac_pci_ctl_info *pci = to_instance(kobj); + struct instance_attribute *instance_attr = to_instance_attr(attr); + + if (instance_attr->store) + return instance_attr->store(pci, buffer, count); + return -EIO; +} + +/* fs_ops table */ +static const struct sysfs_ops pci_instance_ops = { + .show = edac_pci_instance_show, + .store = edac_pci_instance_store +}; + +#define INSTANCE_ATTR(_name, _mode, _show, _store) \ +static struct instance_attribute attr_instance_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .show = _show, \ + .store = _store, \ +}; + +INSTANCE_ATTR(pe_count, S_IRUGO, instance_pe_count_show, NULL); +INSTANCE_ATTR(npe_count, S_IRUGO, instance_npe_count_show, NULL); + +/* pci instance attributes */ +static struct attribute *pci_instance_attrs[] = { + &attr_instance_pe_count.attr, + &attr_instance_npe_count.attr, + NULL +}; +ATTRIBUTE_GROUPS(pci_instance); + +/* the ktype for a pci instance */ +static struct kobj_type ktype_pci_instance = { + .release = edac_pci_instance_release, + .sysfs_ops = &pci_instance_ops, + .default_groups = pci_instance_groups, +}; + +/* + * edac_pci_create_instance_kobj + * + * construct one EDAC PCI instance's kobject for use + */ +static int edac_pci_create_instance_kobj(struct edac_pci_ctl_info *pci, int idx) +{ + struct kobject *main_kobj; + int err; + + edac_dbg(0, "\n"); + + /* First bump the ref count on the top main kobj, which will + * track the number of PCI instances we have, and thus nest + * properly on keeping the module loaded + */ + main_kobj = kobject_get(edac_pci_top_main_kobj); + if (!main_kobj) { + err = -ENODEV; + goto error_out; + } + + /* And now register this new kobject under the main kobj */ + err = kobject_init_and_add(&pci->kobj, &ktype_pci_instance, + edac_pci_top_main_kobj, "pci%d", idx); + if (err != 0) { + edac_dbg(2, "failed to register instance pci%d\n", idx); + kobject_put(edac_pci_top_main_kobj); + goto error_out; + } + + kobject_uevent(&pci->kobj, KOBJ_ADD); + edac_dbg(1, "Register instance 'pci%d' kobject\n", idx); + + return 0; + + /* Error unwind statck */ +error_out: + return err; +} + +/* + * edac_pci_unregister_sysfs_instance_kobj + * + * unregister the kobj for the EDAC PCI instance + */ +static void edac_pci_unregister_sysfs_instance_kobj( + struct edac_pci_ctl_info *pci) +{ + edac_dbg(0, "\n"); + + /* Unregister the instance kobject and allow its release + * function release the main reference count and then + * kfree the memory + */ + kobject_put(&pci->kobj); +} + +/***************************** EDAC PCI sysfs root **********************/ +#define to_edacpci(k) container_of(k, struct edac_pci_ctl_info, kobj) +#define to_edacpci_attr(a) container_of(a, struct edac_pci_attr, attr) + +/* simple show/store functions for attributes */ +static ssize_t edac_pci_int_show(void *ptr, char *buffer) +{ + int *value = ptr; + return sprintf(buffer, "%d\n", *value); +} + +static ssize_t edac_pci_int_store(void *ptr, const char *buffer, size_t count) +{ + int *value = ptr; + + if (isdigit(*buffer)) + *value = simple_strtoul(buffer, NULL, 0); + + return count; +} + +struct edac_pci_dev_attribute { + struct attribute attr; + void *value; + ssize_t(*show) (void *, char *); + ssize_t(*store) (void *, const char *, size_t); +}; + +/* Set of show/store abstract level functions for PCI Parity object */ +static ssize_t edac_pci_dev_show(struct kobject *kobj, struct attribute *attr, + char *buffer) +{ + struct edac_pci_dev_attribute *edac_pci_dev; + edac_pci_dev = (struct edac_pci_dev_attribute *)attr; + + if (edac_pci_dev->show) + return edac_pci_dev->show(edac_pci_dev->value, buffer); + return -EIO; +} + +static ssize_t edac_pci_dev_store(struct kobject *kobj, + struct attribute *attr, const char *buffer, + size_t count) +{ + struct edac_pci_dev_attribute *edac_pci_dev; + edac_pci_dev = (struct edac_pci_dev_attribute *)attr; + + if (edac_pci_dev->store) + return edac_pci_dev->store(edac_pci_dev->value, buffer, count); + return -EIO; +} + +static const struct sysfs_ops edac_pci_sysfs_ops = { + .show = edac_pci_dev_show, + .store = edac_pci_dev_store +}; + +#define EDAC_PCI_ATTR(_name,_mode,_show,_store) \ +static struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .value = &_name, \ + .show = _show, \ + .store = _store, \ +}; + +#define EDAC_PCI_STRING_ATTR(_name,_data,_mode,_show,_store) \ +static struct edac_pci_dev_attribute edac_pci_attr_##_name = { \ + .attr = {.name = __stringify(_name), .mode = _mode }, \ + .value = _data, \ + .show = _show, \ + .store = _store, \ +}; + +/* PCI Parity control files */ +EDAC_PCI_ATTR(check_pci_errors, S_IRUGO | S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(edac_pci_log_pe, S_IRUGO | S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(edac_pci_log_npe, S_IRUGO | S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(edac_pci_panic_on_pe, S_IRUGO | S_IWUSR, edac_pci_int_show, + edac_pci_int_store); +EDAC_PCI_ATTR(pci_parity_count, S_IRUGO, edac_pci_int_show, NULL); +EDAC_PCI_ATTR(pci_nonparity_count, S_IRUGO, edac_pci_int_show, NULL); + +/* Base Attributes of the memory ECC object */ +static struct attribute *edac_pci_attrs[] = { + &edac_pci_attr_check_pci_errors.attr, + &edac_pci_attr_edac_pci_log_pe.attr, + &edac_pci_attr_edac_pci_log_npe.attr, + &edac_pci_attr_edac_pci_panic_on_pe.attr, + &edac_pci_attr_pci_parity_count.attr, + &edac_pci_attr_pci_nonparity_count.attr, + NULL, +}; +ATTRIBUTE_GROUPS(edac_pci); + +/* + * edac_pci_release_main_kobj + * + * This release function is called when the reference count to the + * passed kobj goes to zero. + * + * This kobj is the 'main' kobject that EDAC PCI instances + * link to, and thus provide for proper nesting counts + */ +static void edac_pci_release_main_kobj(struct kobject *kobj) +{ + edac_dbg(0, "here to module_put(THIS_MODULE)\n"); + + kfree(kobj); + + /* last reference to top EDAC PCI kobject has been removed, + * NOW release our ref count on the core module + */ + module_put(THIS_MODULE); +} + +/* ktype struct for the EDAC PCI main kobj */ +static struct kobj_type ktype_edac_pci_main_kobj = { + .release = edac_pci_release_main_kobj, + .sysfs_ops = &edac_pci_sysfs_ops, + .default_groups = edac_pci_groups, +}; + +/** + * edac_pci_main_kobj_setup: Setup the sysfs for EDAC PCI attributes. + */ +static int edac_pci_main_kobj_setup(void) +{ + int err; + struct bus_type *edac_subsys; + + edac_dbg(0, "\n"); + + /* check and count if we have already created the main kobject */ + if (atomic_inc_return(&edac_pci_sysfs_refcount) != 1) + return 0; + + /* First time, so create the main kobject and its + * controls and attributes + */ + edac_subsys = edac_get_sysfs_subsys(); + + /* Bump the reference count on this module to ensure the + * modules isn't unloaded until we deconstruct the top + * level main kobj for EDAC PCI + */ + if (!try_module_get(THIS_MODULE)) { + edac_dbg(1, "try_module_get() failed\n"); + err = -ENODEV; + goto decrement_count_fail; + } + + edac_pci_top_main_kobj = kzalloc(sizeof(struct kobject), GFP_KERNEL); + if (!edac_pci_top_main_kobj) { + edac_dbg(1, "Failed to allocate\n"); + err = -ENOMEM; + goto kzalloc_fail; + } + + /* Instanstiate the pci object */ + err = kobject_init_and_add(edac_pci_top_main_kobj, + &ktype_edac_pci_main_kobj, + &edac_subsys->dev_root->kobj, "pci"); + if (err) { + edac_dbg(1, "Failed to register '.../edac/pci'\n"); + goto kobject_init_and_add_fail; + } + + /* At this point, to 'release' the top level kobject + * for EDAC PCI, then edac_pci_main_kobj_teardown() + * must be used, for resources to be cleaned up properly + */ + kobject_uevent(edac_pci_top_main_kobj, KOBJ_ADD); + edac_dbg(1, "Registered '.../edac/pci' kobject\n"); + + return 0; + + /* Error unwind statck */ +kobject_init_and_add_fail: + kobject_put(edac_pci_top_main_kobj); + +kzalloc_fail: + module_put(THIS_MODULE); + +decrement_count_fail: + /* if are on this error exit, nothing to tear down */ + atomic_dec(&edac_pci_sysfs_refcount); + + return err; +} + +/* + * edac_pci_main_kobj_teardown() + * + * if no longer linked (needed) remove the top level EDAC PCI + * kobject with its controls and attributes + */ +static void edac_pci_main_kobj_teardown(void) +{ + edac_dbg(0, "\n"); + + /* Decrement the count and only if no more controller instances + * are connected perform the unregisteration of the top level + * main kobj + */ + if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) { + edac_dbg(0, "called kobject_put on main kobj\n"); + kobject_put(edac_pci_top_main_kobj); + } +} + +int edac_pci_create_sysfs(struct edac_pci_ctl_info *pci) +{ + int err; + struct kobject *edac_kobj = &pci->kobj; + + edac_dbg(0, "idx=%d\n", pci->pci_idx); + + /* create the top main EDAC PCI kobject, IF needed */ + err = edac_pci_main_kobj_setup(); + if (err) + return err; + + /* Create this instance's kobject under the MAIN kobject */ + err = edac_pci_create_instance_kobj(pci, pci->pci_idx); + if (err) + goto unregister_cleanup; + + err = sysfs_create_link(edac_kobj, &pci->dev->kobj, EDAC_PCI_SYMLINK); + if (err) { + edac_dbg(0, "sysfs_create_link() returned err= %d\n", err); + goto symlink_fail; + } + + return 0; + + /* Error unwind stack */ +symlink_fail: + edac_pci_unregister_sysfs_instance_kobj(pci); + +unregister_cleanup: + edac_pci_main_kobj_teardown(); + + return err; +} + +void edac_pci_remove_sysfs(struct edac_pci_ctl_info *pci) +{ + edac_dbg(0, "index=%d\n", pci->pci_idx); + + /* Remove the symlink */ + sysfs_remove_link(&pci->kobj, EDAC_PCI_SYMLINK); + + /* remove this PCI instance's sysfs entries */ + edac_pci_unregister_sysfs_instance_kobj(pci); + + /* Call the main unregister function, which will determine + * if this 'pci' is the last instance. + * If it is, the main kobject will be unregistered as a result + */ + edac_dbg(0, "calling edac_pci_main_kobj_teardown()\n"); + edac_pci_main_kobj_teardown(); +} + +/************************ PCI error handling *************************/ +static u16 get_pci_parity_status(struct pci_dev *dev, int secondary) +{ + int where; + u16 status; + + where = secondary ? PCI_SEC_STATUS : PCI_STATUS; + pci_read_config_word(dev, where, &status); + + /* If we get back 0xFFFF then we must suspect that the card has been + * pulled but the Linux PCI layer has not yet finished cleaning up. + * We don't want to report on such devices + */ + + if (status == 0xFFFF) { + u32 sanity; + + pci_read_config_dword(dev, 0, &sanity); + + if (sanity == 0xFFFFFFFF) + return 0; + } + + status &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | + PCI_STATUS_PARITY; + + if (status) + /* reset only the bits we are interested in */ + pci_write_config_word(dev, where, status); + + return status; +} + + +/* Clear any PCI parity errors logged by this device. */ +static void edac_pci_dev_parity_clear(struct pci_dev *dev) +{ + u8 header_type; + + get_pci_parity_status(dev, 0); + + /* read the device TYPE, looking for bridges */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) + get_pci_parity_status(dev, 1); +} + +/* + * PCI Parity polling + * + * Function to retrieve the current parity status + * and decode it + * + */ +static void edac_pci_dev_parity_test(struct pci_dev *dev) +{ + unsigned long flags; + u16 status; + u8 header_type; + + /* stop any interrupts until we can acquire the status */ + local_irq_save(flags); + + /* read the STATUS register on this device */ + status = get_pci_parity_status(dev, 0); + + /* read the device TYPE, looking for bridges */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type); + + local_irq_restore(flags); + + edac_dbg(4, "PCI STATUS= 0x%04x %s\n", status, dev_name(&dev->dev)); + + /* check the status reg for errors on boards NOT marked as broken + * if broken, we cannot trust any of the status bits + */ + if (status && !dev->broken_parity_status) { + if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) { + edac_printk(KERN_CRIT, EDAC_PCI, + "Signaled System Error on %s\n", + pci_name(dev)); + atomic_inc(&pci_nonparity_count); + } + + if (status & (PCI_STATUS_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, + "Master Data Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + + if (status & (PCI_STATUS_DETECTED_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, + "Detected Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + } + + + edac_dbg(4, "PCI HEADER TYPE= 0x%02x %s\n", + header_type, dev_name(&dev->dev)); + + if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { + /* On bridges, need to examine secondary status register */ + status = get_pci_parity_status(dev, 1); + + edac_dbg(4, "PCI SEC_STATUS= 0x%04x %s\n", + status, dev_name(&dev->dev)); + + /* check the secondary status reg for errors, + * on NOT broken boards + */ + if (status && !dev->broken_parity_status) { + if (status & (PCI_STATUS_SIG_SYSTEM_ERROR)) { + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Signaled System Error on %s\n", + pci_name(dev)); + atomic_inc(&pci_nonparity_count); + } + + if (status & (PCI_STATUS_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Master Data Parity Error on " + "%s\n", pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + + if (status & (PCI_STATUS_DETECTED_PARITY)) { + edac_printk(KERN_CRIT, EDAC_PCI, "Bridge " + "Detected Parity Error on %s\n", + pci_name(dev)); + + atomic_inc(&pci_parity_count); + } + } + } +} + +/* reduce some complexity in definition of the iterator */ +typedef void (*pci_parity_check_fn_t) (struct pci_dev *dev); + +/* + * pci_dev parity list iterator + * + * Scan the PCI device list looking for SERRORs, Master Parity ERRORS or + * Parity ERRORs on primary or secondary devices. + */ +static inline void edac_pci_dev_parity_iterator(pci_parity_check_fn_t fn) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + fn(dev); +} + +/* + * edac_pci_do_parity_check + * + * performs the actual PCI parity check operation + */ +void edac_pci_do_parity_check(void) +{ + int before_count; + + edac_dbg(3, "\n"); + + /* if policy has PCI check off, leave now */ + if (!check_pci_errors) + return; + + before_count = atomic_read(&pci_parity_count); + + /* scan all PCI devices looking for a Parity Error on devices and + * bridges. + * The iterator calls pci_get_device() which might sleep, thus + * we cannot disable interrupts in this scan. + */ + edac_pci_dev_parity_iterator(edac_pci_dev_parity_test); + + /* Only if operator has selected panic on PCI Error */ + if (edac_pci_get_panic_on_pe()) { + /* If the count is different 'after' from 'before' */ + if (before_count != atomic_read(&pci_parity_count)) + panic("EDAC: PCI Parity Error"); + } +} + +/* + * edac_pci_clear_parity_errors + * + * function to perform an iteration over the PCI devices + * and clearn their current status + */ +void edac_pci_clear_parity_errors(void) +{ + /* Clear any PCI bus parity errors that devices initially have logged + * in their registers. + */ + edac_pci_dev_parity_iterator(edac_pci_dev_parity_clear); +} + +/* + * edac_pci_handle_pe + * + * Called to handle a PARITY ERROR event + */ +void edac_pci_handle_pe(struct edac_pci_ctl_info *pci, const char *msg) +{ + + /* global PE counter incremented by edac_pci_do_parity_check() */ + atomic_inc(&pci->counters.pe_count); + + if (edac_pci_get_log_pe()) + edac_pci_printk(pci, KERN_WARNING, + "Parity Error ctl: %s %d: %s\n", + pci->ctl_name, pci->pci_idx, msg); + + /* + * poke all PCI devices and see which one is the troublemaker + * panic() is called if set + */ + edac_pci_do_parity_check(); +} +EXPORT_SYMBOL_GPL(edac_pci_handle_pe); + + +/* + * edac_pci_handle_npe + * + * Called to handle a NON-PARITY ERROR event + */ +void edac_pci_handle_npe(struct edac_pci_ctl_info *pci, const char *msg) +{ + + /* global NPE counter incremented by edac_pci_do_parity_check() */ + atomic_inc(&pci->counters.npe_count); + + if (edac_pci_get_log_npe()) + edac_pci_printk(pci, KERN_WARNING, + "Non-Parity Error ctl: %s %d: %s\n", + pci->ctl_name, pci->pci_idx, msg); + + /* + * poke all PCI devices and see which one is the troublemaker + * panic() is called if set + */ + edac_pci_do_parity_check(); +} +EXPORT_SYMBOL_GPL(edac_pci_handle_npe); + +/* + * Define the PCI parameter to the module + */ +module_param(check_pci_errors, int, 0644); +MODULE_PARM_DESC(check_pci_errors, + "Check for PCI bus parity errors: 0=off 1=on"); +module_param(edac_pci_panic_on_pe, int, 0644); +MODULE_PARM_DESC(edac_pci_panic_on_pe, + "Panic on PCI Bus Parity error: 0=off 1=on"); diff --git a/drivers/edac/fsl_ddr_edac.c b/drivers/edac/fsl_ddr_edac.c new file mode 100644 index 000000000..ac2102b25 --- /dev/null +++ b/drivers/edac/fsl_ddr_edac.c @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Freescale Memory Controller kernel module + * + * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally + * split out from mpc85xx_edac EDAC driver. + * + * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc. + * + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ctype.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/edac.h> +#include <linux/smp.h> +#include <linux/gfp.h> + +#include <linux/of_platform.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include "edac_module.h" +#include "fsl_ddr_edac.h" + +#define EDAC_MOD_STR "fsl_ddr_edac" + +static int edac_mc_idx; + +static u32 orig_ddr_err_disable; +static u32 orig_ddr_err_sbe; +static bool little_endian; + +static inline u32 ddr_in32(void __iomem *addr) +{ + return little_endian ? ioread32(addr) : ioread32be(addr); +} + +static inline void ddr_out32(void __iomem *addr, u32 value) +{ + if (little_endian) + iowrite32(value, addr); + else + iowrite32be(value, addr); +} + +#ifdef CONFIG_EDAC_DEBUG +/************************ MC SYSFS parts ***********************************/ + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +static ssize_t fsl_mc_inject_data_hi_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + return sprintf(data, "0x%08x", + ddr_in32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_HI)); +} + +static ssize_t fsl_mc_inject_data_lo_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + return sprintf(data, "0x%08x", + ddr_in32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_LO)); +} + +static ssize_t fsl_mc_inject_ctrl_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + return sprintf(data, "0x%08x", + ddr_in32(pdata->mc_vbase + FSL_MC_ECC_ERR_INJECT)); +} + +static ssize_t fsl_mc_inject_data_hi_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + unsigned long val; + int rc; + + if (isdigit(*data)) { + rc = kstrtoul(data, 0, &val); + if (rc) + return rc; + + ddr_out32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_HI, val); + return count; + } + return 0; +} + +static ssize_t fsl_mc_inject_data_lo_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + unsigned long val; + int rc; + + if (isdigit(*data)) { + rc = kstrtoul(data, 0, &val); + if (rc) + return rc; + + ddr_out32(pdata->mc_vbase + FSL_MC_DATA_ERR_INJECT_LO, val); + return count; + } + return 0; +} + +static ssize_t fsl_mc_inject_ctrl_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + unsigned long val; + int rc; + + if (isdigit(*data)) { + rc = kstrtoul(data, 0, &val); + if (rc) + return rc; + + ddr_out32(pdata->mc_vbase + FSL_MC_ECC_ERR_INJECT, val); + return count; + } + return 0; +} + +static DEVICE_ATTR(inject_data_hi, S_IRUGO | S_IWUSR, + fsl_mc_inject_data_hi_show, fsl_mc_inject_data_hi_store); +static DEVICE_ATTR(inject_data_lo, S_IRUGO | S_IWUSR, + fsl_mc_inject_data_lo_show, fsl_mc_inject_data_lo_store); +static DEVICE_ATTR(inject_ctrl, S_IRUGO | S_IWUSR, + fsl_mc_inject_ctrl_show, fsl_mc_inject_ctrl_store); +#endif /* CONFIG_EDAC_DEBUG */ + +static struct attribute *fsl_ddr_dev_attrs[] = { +#ifdef CONFIG_EDAC_DEBUG + &dev_attr_inject_data_hi.attr, + &dev_attr_inject_data_lo.attr, + &dev_attr_inject_ctrl.attr, +#endif + NULL +}; + +ATTRIBUTE_GROUPS(fsl_ddr_dev); + +/**************************** MC Err device ***************************/ + +/* + * Taken from table 8-55 in the MPC8641 User's Manual and/or 9-61 in the + * MPC8572 User's Manual. Each line represents a syndrome bit column as a + * 64-bit value, but split into an upper and lower 32-bit chunk. The labels + * below correspond to Freescale's manuals. + */ +static unsigned int ecc_table[16] = { + /* MSB LSB */ + /* [0:31] [32:63] */ + 0xf00fe11e, 0xc33c0ff7, /* Syndrome bit 7 */ + 0x00ff00ff, 0x00fff0ff, + 0x0f0f0f0f, 0x0f0fff00, + 0x11113333, 0x7777000f, + 0x22224444, 0x8888222f, + 0x44448888, 0xffff4441, + 0x8888ffff, 0x11118882, + 0xffff1111, 0x22221114, /* Syndrome bit 0 */ +}; + +/* + * Calculate the correct ECC value for a 64-bit value specified by high:low + */ +static u8 calculate_ecc(u32 high, u32 low) +{ + u32 mask_low; + u32 mask_high; + int bit_cnt; + u8 ecc = 0; + int i; + int j; + + for (i = 0; i < 8; i++) { + mask_high = ecc_table[i * 2]; + mask_low = ecc_table[i * 2 + 1]; + bit_cnt = 0; + + for (j = 0; j < 32; j++) { + if ((mask_high >> j) & 1) + bit_cnt ^= (high >> j) & 1; + if ((mask_low >> j) & 1) + bit_cnt ^= (low >> j) & 1; + } + + ecc |= bit_cnt << i; + } + + return ecc; +} + +/* + * Create the syndrome code which is generated if the data line specified by + * 'bit' failed. Eg generate an 8-bit codes seen in Table 8-55 in the MPC8641 + * User's Manual and 9-61 in the MPC8572 User's Manual. + */ +static u8 syndrome_from_bit(unsigned int bit) { + int i; + u8 syndrome = 0; + + /* + * Cycle through the upper or lower 32-bit portion of each value in + * ecc_table depending on if 'bit' is in the upper or lower half of + * 64-bit data. + */ + for (i = bit < 32; i < 16; i += 2) + syndrome |= ((ecc_table[i] >> (bit % 32)) & 1) << (i / 2); + + return syndrome; +} + +/* + * Decode data and ecc syndrome to determine what went wrong + * Note: This can only decode single-bit errors + */ +static void sbe_ecc_decode(u32 cap_high, u32 cap_low, u32 cap_ecc, + int *bad_data_bit, int *bad_ecc_bit) +{ + int i; + u8 syndrome; + + *bad_data_bit = -1; + *bad_ecc_bit = -1; + + /* + * Calculate the ECC of the captured data and XOR it with the captured + * ECC to find an ECC syndrome value we can search for + */ + syndrome = calculate_ecc(cap_high, cap_low) ^ cap_ecc; + + /* Check if a data line is stuck... */ + for (i = 0; i < 64; i++) { + if (syndrome == syndrome_from_bit(i)) { + *bad_data_bit = i; + return; + } + } + + /* If data is correct, check ECC bits for errors... */ + for (i = 0; i < 8; i++) { + if ((syndrome >> i) & 0x1) { + *bad_ecc_bit = i; + return; + } + } +} + +#define make64(high, low) (((u64)(high) << 32) | (low)) + +static void fsl_mc_check(struct mem_ctl_info *mci) +{ + struct fsl_mc_pdata *pdata = mci->pvt_info; + struct csrow_info *csrow; + u32 bus_width; + u32 err_detect; + u32 syndrome; + u64 err_addr; + u32 pfn; + int row_index; + u32 cap_high; + u32 cap_low; + int bad_data_bit; + int bad_ecc_bit; + + err_detect = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DETECT); + if (!err_detect) + return; + + fsl_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n", + err_detect); + + /* no more processing if not ECC bit errors */ + if (!(err_detect & (DDR_EDE_SBE | DDR_EDE_MBE))) { + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, err_detect); + return; + } + + syndrome = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_ECC); + + /* Mask off appropriate bits of syndrome based on bus width */ + bus_width = (ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG) & + DSC_DBW_MASK) ? 32 : 64; + if (bus_width == 64) + syndrome &= 0xff; + else + syndrome &= 0xffff; + + err_addr = make64( + ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_EXT_ADDRESS), + ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_ADDRESS)); + pfn = err_addr >> PAGE_SHIFT; + + for (row_index = 0; row_index < mci->nr_csrows; row_index++) { + csrow = mci->csrows[row_index]; + if ((pfn >= csrow->first_page) && (pfn <= csrow->last_page)) + break; + } + + cap_high = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_DATA_HI); + cap_low = ddr_in32(pdata->mc_vbase + FSL_MC_CAPTURE_DATA_LO); + + /* + * Analyze single-bit errors on 64-bit wide buses + * TODO: Add support for 32-bit wide buses + */ + if ((err_detect & DDR_EDE_SBE) && (bus_width == 64)) { + sbe_ecc_decode(cap_high, cap_low, syndrome, + &bad_data_bit, &bad_ecc_bit); + + if (bad_data_bit != -1) + fsl_mc_printk(mci, KERN_ERR, + "Faulty Data bit: %d\n", bad_data_bit); + if (bad_ecc_bit != -1) + fsl_mc_printk(mci, KERN_ERR, + "Faulty ECC bit: %d\n", bad_ecc_bit); + + fsl_mc_printk(mci, KERN_ERR, + "Expected Data / ECC:\t%#8.8x_%08x / %#2.2x\n", + cap_high ^ (1 << (bad_data_bit - 32)), + cap_low ^ (1 << bad_data_bit), + syndrome ^ (1 << bad_ecc_bit)); + } + + fsl_mc_printk(mci, KERN_ERR, + "Captured Data / ECC:\t%#8.8x_%08x / %#2.2x\n", + cap_high, cap_low, syndrome); + fsl_mc_printk(mci, KERN_ERR, "Err addr: %#8.8llx\n", err_addr); + fsl_mc_printk(mci, KERN_ERR, "PFN: %#8.8x\n", pfn); + + /* we are out of range */ + if (row_index == mci->nr_csrows) + fsl_mc_printk(mci, KERN_ERR, "PFN out of range!\n"); + + if (err_detect & DDR_EDE_SBE) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + pfn, err_addr & ~PAGE_MASK, syndrome, + row_index, 0, -1, + mci->ctl_name, ""); + + if (err_detect & DDR_EDE_MBE) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + pfn, err_addr & ~PAGE_MASK, syndrome, + row_index, 0, -1, + mci->ctl_name, ""); + + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, err_detect); +} + +static irqreturn_t fsl_mc_isr(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct fsl_mc_pdata *pdata = mci->pvt_info; + u32 err_detect; + + err_detect = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DETECT); + if (!err_detect) + return IRQ_NONE; + + fsl_mc_check(mci); + + return IRQ_HANDLED; +} + +static void fsl_ddr_init_csrows(struct mem_ctl_info *mci) +{ + struct fsl_mc_pdata *pdata = mci->pvt_info; + struct csrow_info *csrow; + struct dimm_info *dimm; + u32 sdram_ctl; + u32 sdtype; + enum mem_type mtype; + u32 cs_bnds; + int index; + + sdram_ctl = ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG); + + sdtype = sdram_ctl & DSC_SDTYPE_MASK; + if (sdram_ctl & DSC_RD_EN) { + switch (sdtype) { + case 0x02000000: + mtype = MEM_RDDR; + break; + case 0x03000000: + mtype = MEM_RDDR2; + break; + case 0x07000000: + mtype = MEM_RDDR3; + break; + case 0x05000000: + mtype = MEM_RDDR4; + break; + default: + mtype = MEM_UNKNOWN; + break; + } + } else { + switch (sdtype) { + case 0x02000000: + mtype = MEM_DDR; + break; + case 0x03000000: + mtype = MEM_DDR2; + break; + case 0x07000000: + mtype = MEM_DDR3; + break; + case 0x05000000: + mtype = MEM_DDR4; + break; + default: + mtype = MEM_UNKNOWN; + break; + } + } + + for (index = 0; index < mci->nr_csrows; index++) { + u32 start; + u32 end; + + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + cs_bnds = ddr_in32(pdata->mc_vbase + FSL_MC_CS_BNDS_0 + + (index * FSL_MC_CS_BNDS_OFS)); + + start = (cs_bnds & 0xffff0000) >> 16; + end = (cs_bnds & 0x0000ffff); + + if (start == end) + continue; /* not populated */ + + start <<= (24 - PAGE_SHIFT); + end <<= (24 - PAGE_SHIFT); + end |= (1 << (24 - PAGE_SHIFT)) - 1; + + csrow->first_page = start; + csrow->last_page = end; + + dimm->nr_pages = end + 1 - start; + dimm->grain = 8; + dimm->mtype = mtype; + dimm->dtype = DEV_UNKNOWN; + if (sdram_ctl & DSC_X32_EN) + dimm->dtype = DEV_X32; + dimm->edac_mode = EDAC_SECDED; + } +} + +int fsl_mc_err_probe(struct platform_device *op) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct fsl_mc_pdata *pdata; + struct resource r; + u32 sdram_ctl; + int res; + + if (!devres_open_group(&op->dev, fsl_mc_err_probe, GFP_KERNEL)) + return -ENOMEM; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 4; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers, + sizeof(*pdata)); + if (!mci) { + devres_release_group(&op->dev, fsl_mc_err_probe); + return -ENOMEM; + } + + pdata = mci->pvt_info; + pdata->name = "fsl_mc_err"; + mci->pdev = &op->dev; + pdata->edac_idx = edac_mc_idx++; + dev_set_drvdata(mci->pdev, mci); + mci->ctl_name = pdata->name; + mci->dev_name = pdata->name; + + /* + * Get the endianness of DDR controller registers. + * Default is big endian. + */ + little_endian = of_property_read_bool(op->dev.of_node, "little-endian"); + + res = of_address_to_resource(op->dev.of_node, 0, &r); + if (res) { + pr_err("%s: Unable to get resource for MC err regs\n", + __func__); + goto err; + } + + if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), + pdata->name)) { + pr_err("%s: Error while requesting mem region\n", + __func__); + res = -EBUSY; + goto err; + } + + pdata->mc_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); + if (!pdata->mc_vbase) { + pr_err("%s: Unable to setup MC err regs\n", __func__); + res = -ENOMEM; + goto err; + } + + sdram_ctl = ddr_in32(pdata->mc_vbase + FSL_MC_DDR_SDRAM_CFG); + if (!(sdram_ctl & DSC_ECC_EN)) { + /* no ECC */ + pr_warn("%s: No ECC DIMMs discovered\n", __func__); + res = -ENODEV; + goto err; + } + + edac_dbg(3, "init mci\n"); + mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR | + MEM_FLAG_DDR2 | MEM_FLAG_RDDR2 | + MEM_FLAG_DDR3 | MEM_FLAG_RDDR3 | + MEM_FLAG_DDR4 | MEM_FLAG_RDDR4; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + + if (edac_op_state == EDAC_OPSTATE_POLL) + mci->edac_check = fsl_mc_check; + + mci->ctl_page_to_phys = NULL; + + mci->scrub_mode = SCRUB_SW_SRC; + + fsl_ddr_init_csrows(mci); + + /* store the original error disable bits */ + orig_ddr_err_disable = ddr_in32(pdata->mc_vbase + FSL_MC_ERR_DISABLE); + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DISABLE, 0); + + /* clear all error bits */ + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DETECT, ~0); + + res = edac_mc_add_mc_with_groups(mci, fsl_ddr_dev_groups); + if (res) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto err; + } + + if (edac_op_state == EDAC_OPSTATE_INT) { + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_INT_EN, + DDR_EIE_MBEE | DDR_EIE_SBEE); + + /* store the original error management threshold */ + orig_ddr_err_sbe = ddr_in32(pdata->mc_vbase + + FSL_MC_ERR_SBE) & 0xff0000; + + /* set threshold to 1 error per interrupt */ + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_SBE, 0x10000); + + /* register interrupts */ + pdata->irq = platform_get_irq(op, 0); + res = devm_request_irq(&op->dev, pdata->irq, + fsl_mc_isr, + IRQF_SHARED, + "[EDAC] MC err", mci); + if (res < 0) { + pr_err("%s: Unable to request irq %d for FSL DDR DRAM ERR\n", + __func__, pdata->irq); + res = -ENODEV; + goto err2; + } + + pr_info(EDAC_MOD_STR " acquired irq %d for MC\n", + pdata->irq); + } + + devres_remove_group(&op->dev, fsl_mc_err_probe); + edac_dbg(3, "success\n"); + pr_info(EDAC_MOD_STR " MC err registered\n"); + + return 0; + +err2: + edac_mc_del_mc(&op->dev); +err: + devres_release_group(&op->dev, fsl_mc_err_probe); + edac_mc_free(mci); + return res; +} + +int fsl_mc_err_remove(struct platform_device *op) +{ + struct mem_ctl_info *mci = dev_get_drvdata(&op->dev); + struct fsl_mc_pdata *pdata = mci->pvt_info; + + edac_dbg(0, "\n"); + + if (edac_op_state == EDAC_OPSTATE_INT) { + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_INT_EN, 0); + } + + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_DISABLE, + orig_ddr_err_disable); + ddr_out32(pdata->mc_vbase + FSL_MC_ERR_SBE, orig_ddr_err_sbe); + + edac_mc_del_mc(&op->dev); + edac_mc_free(mci); + return 0; +} diff --git a/drivers/edac/fsl_ddr_edac.h b/drivers/edac/fsl_ddr_edac.h new file mode 100644 index 000000000..332439d7b --- /dev/null +++ b/drivers/edac/fsl_ddr_edac.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Freescale Memory Controller kernel module + * + * Support Power-based SoCs including MPC85xx, MPC86xx, MPC83xx and + * ARM-based Layerscape SoCs including LS2xxx and LS1021A. Originally + * split out from mpc85xx_edac EDAC driver. + * + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. + */ +#ifndef _FSL_DDR_EDAC_H_ +#define _FSL_DDR_EDAC_H_ + +#define fsl_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "FSL_DDR", fmt, ##arg) + +/* + * DRAM error defines + */ + +/* DDR_SDRAM_CFG */ +#define FSL_MC_DDR_SDRAM_CFG 0x0110 +#define FSL_MC_CS_BNDS_0 0x0000 +#define FSL_MC_CS_BNDS_OFS 0x0008 + +#define FSL_MC_DATA_ERR_INJECT_HI 0x0e00 +#define FSL_MC_DATA_ERR_INJECT_LO 0x0e04 +#define FSL_MC_ECC_ERR_INJECT 0x0e08 +#define FSL_MC_CAPTURE_DATA_HI 0x0e20 +#define FSL_MC_CAPTURE_DATA_LO 0x0e24 +#define FSL_MC_CAPTURE_ECC 0x0e28 +#define FSL_MC_ERR_DETECT 0x0e40 +#define FSL_MC_ERR_DISABLE 0x0e44 +#define FSL_MC_ERR_INT_EN 0x0e48 +#define FSL_MC_CAPTURE_ATRIBUTES 0x0e4c +#define FSL_MC_CAPTURE_ADDRESS 0x0e50 +#define FSL_MC_CAPTURE_EXT_ADDRESS 0x0e54 +#define FSL_MC_ERR_SBE 0x0e58 + +#define DSC_MEM_EN 0x80000000 +#define DSC_ECC_EN 0x20000000 +#define DSC_RD_EN 0x10000000 +#define DSC_DBW_MASK 0x00180000 +#define DSC_DBW_32 0x00080000 +#define DSC_DBW_64 0x00000000 + +#define DSC_SDTYPE_MASK 0x07000000 +#define DSC_X32_EN 0x00000020 + +/* Err_Int_En */ +#define DDR_EIE_MSEE 0x1 /* memory select */ +#define DDR_EIE_SBEE 0x4 /* single-bit ECC error */ +#define DDR_EIE_MBEE 0x8 /* multi-bit ECC error */ + +/* Err_Detect */ +#define DDR_EDE_MSE 0x1 /* memory select */ +#define DDR_EDE_SBE 0x4 /* single-bit ECC error */ +#define DDR_EDE_MBE 0x8 /* multi-bit ECC error */ +#define DDR_EDE_MME 0x80000000 /* multiple memory errors */ + +/* Err_Disable */ +#define DDR_EDI_MSED 0x1 /* memory select disable */ +#define DDR_EDI_SBED 0x4 /* single-bit ECC error disable */ +#define DDR_EDI_MBED 0x8 /* multi-bit ECC error disable */ + +struct fsl_mc_pdata { + char *name; + int edac_idx; + void __iomem *mc_vbase; + int irq; +}; +int fsl_mc_err_probe(struct platform_device *op); +int fsl_mc_err_remove(struct platform_device *op); +#endif diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c new file mode 100644 index 000000000..c8fa7dcfd --- /dev/null +++ b/drivers/edac/ghes_edac.c @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GHES/EDAC Linux driver + * + * Copyright (c) 2013 by Mauro Carvalho Chehab + * + * Red Hat Inc. https://www.redhat.com + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <acpi/ghes.h> +#include <linux/edac.h> +#include <linux/dmi.h> +#include "edac_module.h" +#include <ras/ras_event.h> + +#define OTHER_DETAIL_LEN 400 + +struct ghes_pvt { + struct mem_ctl_info *mci; + + /* Buffers for the error handling routine */ + char other_detail[OTHER_DETAIL_LEN]; + char msg[80]; +}; + +static refcount_t ghes_refcount = REFCOUNT_INIT(0); + +/* + * Access to ghes_pvt must be protected by ghes_lock. The spinlock + * also provides the necessary (implicit) memory barrier for the SMP + * case to make the pointer visible on another CPU. + */ +static struct ghes_pvt *ghes_pvt; + +/* + * This driver's representation of the system hardware, as collected + * from DMI. + */ +static struct ghes_hw_desc { + int num_dimms; + struct dimm_info *dimms; +} ghes_hw; + +/* GHES registration mutex */ +static DEFINE_MUTEX(ghes_reg_mutex); + +/* + * Sync with other, potentially concurrent callers of + * ghes_edac_report_mem_error(). We don't know what the + * "inventive" firmware would do. + */ +static DEFINE_SPINLOCK(ghes_lock); + +/* "ghes_edac.force_load=1" skips the platform check */ +static bool __read_mostly force_load; +module_param(force_load, bool, 0); + +static bool system_scanned; + +/* Memory Device - Type 17 of SMBIOS spec */ +struct memdev_dmi_entry { + u8 type; + u8 length; + u16 handle; + u16 phys_mem_array_handle; + u16 mem_err_info_handle; + u16 total_width; + u16 data_width; + u16 size; + u8 form_factor; + u8 device_set; + u8 device_locator; + u8 bank_locator; + u8 memory_type; + u16 type_detail; + u16 speed; + u8 manufacturer; + u8 serial_number; + u8 asset_tag; + u8 part_number; + u8 attributes; + u32 extended_size; + u16 conf_mem_clk_speed; +} __attribute__((__packed__)); + +static struct dimm_info *find_dimm_by_handle(struct mem_ctl_info *mci, u16 handle) +{ + struct dimm_info *dimm; + + mci_for_each_dimm(mci, dimm) { + if (dimm->smbios_handle == handle) + return dimm; + } + + return NULL; +} + +static void dimm_setup_label(struct dimm_info *dimm, u16 handle) +{ + const char *bank = NULL, *device = NULL; + + dmi_memdev_name(handle, &bank, &device); + + /* + * Set to a NULL string when both bank and device are zero. In this case, + * the label assigned by default will be preserved. + */ + snprintf(dimm->label, sizeof(dimm->label), "%s%s%s", + (bank && *bank) ? bank : "", + (bank && *bank && device && *device) ? " " : "", + (device && *device) ? device : ""); +} + +static void assign_dmi_dimm_info(struct dimm_info *dimm, struct memdev_dmi_entry *entry) +{ + u16 rdr_mask = BIT(7) | BIT(13); + + if (entry->size == 0xffff) { + pr_info("Can't get DIMM%i size\n", dimm->idx); + dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */ + } else if (entry->size == 0x7fff) { + dimm->nr_pages = MiB_TO_PAGES(entry->extended_size); + } else { + if (entry->size & BIT(15)) + dimm->nr_pages = MiB_TO_PAGES((entry->size & 0x7fff) << 10); + else + dimm->nr_pages = MiB_TO_PAGES(entry->size); + } + + switch (entry->memory_type) { + case 0x12: + if (entry->type_detail & BIT(13)) + dimm->mtype = MEM_RDDR; + else + dimm->mtype = MEM_DDR; + break; + case 0x13: + if (entry->type_detail & BIT(13)) + dimm->mtype = MEM_RDDR2; + else + dimm->mtype = MEM_DDR2; + break; + case 0x14: + dimm->mtype = MEM_FB_DDR2; + break; + case 0x18: + if (entry->type_detail & BIT(12)) + dimm->mtype = MEM_NVDIMM; + else if (entry->type_detail & BIT(13)) + dimm->mtype = MEM_RDDR3; + else + dimm->mtype = MEM_DDR3; + break; + case 0x1a: + if (entry->type_detail & BIT(12)) + dimm->mtype = MEM_NVDIMM; + else if (entry->type_detail & BIT(13)) + dimm->mtype = MEM_RDDR4; + else + dimm->mtype = MEM_DDR4; + break; + default: + if (entry->type_detail & BIT(6)) + dimm->mtype = MEM_RMBS; + else if ((entry->type_detail & rdr_mask) == rdr_mask) + dimm->mtype = MEM_RDR; + else if (entry->type_detail & BIT(7)) + dimm->mtype = MEM_SDR; + else if (entry->type_detail & BIT(9)) + dimm->mtype = MEM_EDO; + else + dimm->mtype = MEM_UNKNOWN; + } + + /* + * Actually, we can only detect if the memory has bits for + * checksum or not + */ + if (entry->total_width == entry->data_width) + dimm->edac_mode = EDAC_NONE; + else + dimm->edac_mode = EDAC_SECDED; + + dimm->dtype = DEV_UNKNOWN; + dimm->grain = 128; /* Likely, worse case */ + + dimm_setup_label(dimm, entry->handle); + + if (dimm->nr_pages) { + edac_dbg(1, "DIMM%i: %s size = %d MB%s\n", + dimm->idx, edac_mem_types[dimm->mtype], + PAGES_TO_MiB(dimm->nr_pages), + (dimm->edac_mode != EDAC_NONE) ? "(ECC)" : ""); + edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n", + entry->memory_type, entry->type_detail, + entry->total_width, entry->data_width); + } + + dimm->smbios_handle = entry->handle; +} + +static void enumerate_dimms(const struct dmi_header *dh, void *arg) +{ + struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh; + struct ghes_hw_desc *hw = (struct ghes_hw_desc *)arg; + struct dimm_info *d; + + if (dh->type != DMI_ENTRY_MEM_DEVICE) + return; + + /* Enlarge the array with additional 16 */ + if (!hw->num_dimms || !(hw->num_dimms % 16)) { + struct dimm_info *new; + + new = krealloc_array(hw->dimms, hw->num_dimms + 16, + sizeof(struct dimm_info), GFP_KERNEL); + if (!new) { + WARN_ON_ONCE(1); + return; + } + + hw->dimms = new; + } + + d = &hw->dimms[hw->num_dimms]; + d->idx = hw->num_dimms; + + assign_dmi_dimm_info(d, entry); + + hw->num_dimms++; +} + +static void ghes_scan_system(void) +{ + if (system_scanned) + return; + + dmi_walk(enumerate_dimms, &ghes_hw); + + system_scanned = true; +} + +static int print_mem_error_other_detail(const struct cper_sec_mem_err *mem, char *msg, + const char *location, unsigned int len) +{ + u32 n; + + if (!msg) + return 0; + + n = 0; + len -= 1; + + n += scnprintf(msg + n, len - n, "APEI location: %s ", location); + + if (!(mem->validation_bits & CPER_MEM_VALID_ERROR_STATUS)) + goto out; + + n += scnprintf(msg + n, len - n, "status(0x%016llx): ", mem->error_status); + n += scnprintf(msg + n, len - n, "%s ", cper_mem_err_status_str(mem->error_status)); + +out: + msg[n] = '\0'; + + return n; +} + +void ghes_edac_report_mem_error(int sev, struct cper_sec_mem_err *mem_err) +{ + struct cper_mem_err_compact cmem; + struct edac_raw_error_desc *e; + struct mem_ctl_info *mci; + struct ghes_pvt *pvt; + unsigned long flags; + char *p; + + /* + * We can do the locking below because GHES defers error processing + * from NMI to IRQ context. Whenever that changes, we'd at least + * know. + */ + if (WARN_ON_ONCE(in_nmi())) + return; + + spin_lock_irqsave(&ghes_lock, flags); + + pvt = ghes_pvt; + if (!pvt) + goto unlock; + + mci = pvt->mci; + e = &mci->error_desc; + + /* Cleans the error report buffer */ + memset(e, 0, sizeof (*e)); + e->error_count = 1; + e->grain = 1; + e->msg = pvt->msg; + e->other_detail = pvt->other_detail; + e->top_layer = -1; + e->mid_layer = -1; + e->low_layer = -1; + *pvt->other_detail = '\0'; + *pvt->msg = '\0'; + + switch (sev) { + case GHES_SEV_CORRECTED: + e->type = HW_EVENT_ERR_CORRECTED; + break; + case GHES_SEV_RECOVERABLE: + e->type = HW_EVENT_ERR_UNCORRECTED; + break; + case GHES_SEV_PANIC: + e->type = HW_EVENT_ERR_FATAL; + break; + default: + case GHES_SEV_NO: + e->type = HW_EVENT_ERR_INFO; + } + + edac_dbg(1, "error validation_bits: 0x%08llx\n", + (long long)mem_err->validation_bits); + + /* Error type, mapped on e->msg */ + if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) { + u8 etype = mem_err->error_type; + + p = pvt->msg; + p += snprintf(p, sizeof(pvt->msg), "%s", cper_mem_err_type_str(etype)); + } else { + strcpy(pvt->msg, "unknown error"); + } + + /* Error address */ + if (mem_err->validation_bits & CPER_MEM_VALID_PA) { + e->page_frame_number = PHYS_PFN(mem_err->physical_addr); + e->offset_in_page = offset_in_page(mem_err->physical_addr); + } + + /* Error grain */ + if (mem_err->validation_bits & CPER_MEM_VALID_PA_MASK) + e->grain = ~mem_err->physical_addr_mask + 1; + + /* Memory error location, mapped on e->location */ + p = e->location; + cper_mem_err_pack(mem_err, &cmem); + p += cper_mem_err_location(&cmem, p); + + if (mem_err->validation_bits & CPER_MEM_VALID_MODULE_HANDLE) { + struct dimm_info *dimm; + + p += cper_dimm_err_location(&cmem, p); + dimm = find_dimm_by_handle(mci, mem_err->mem_dev_handle); + if (dimm) { + e->top_layer = dimm->idx; + strcpy(e->label, dimm->label); + } + } + if (p > e->location) + *(p - 1) = '\0'; + + if (!*e->label) + strcpy(e->label, "unknown memory"); + + /* All other fields are mapped on e->other_detail */ + p = pvt->other_detail; + p += print_mem_error_other_detail(mem_err, p, e->location, OTHER_DETAIL_LEN); + if (p > pvt->other_detail) + *(p - 1) = '\0'; + + edac_raw_mc_handle_error(e); + +unlock: + spin_unlock_irqrestore(&ghes_lock, flags); +} + +/* + * Known systems that are safe to enable this module. + */ +static struct acpi_platform_list plat_list[] = { + {"HPE ", "Server ", 0, ACPI_SIG_FADT, all_versions}, + { } /* End */ +}; + +int ghes_edac_register(struct ghes *ghes, struct device *dev) +{ + bool fake = false; + struct mem_ctl_info *mci; + struct ghes_pvt *pvt; + struct edac_mc_layer layers[1]; + unsigned long flags; + int idx = -1; + int rc = 0; + + if (IS_ENABLED(CONFIG_X86)) { + /* Check if safe to enable on this system */ + idx = acpi_match_platform_list(plat_list); + if (!force_load && idx < 0) + return -ENODEV; + } else { + force_load = true; + idx = 0; + } + + /* finish another registration/unregistration instance first */ + mutex_lock(&ghes_reg_mutex); + + /* + * We have only one logical memory controller to which all DIMMs belong. + */ + if (refcount_inc_not_zero(&ghes_refcount)) + goto unlock; + + ghes_scan_system(); + + /* Check if we've got a bogus BIOS */ + if (!ghes_hw.num_dimms) { + fake = true; + ghes_hw.num_dimms = 1; + } + + layers[0].type = EDAC_MC_LAYER_ALL_MEM; + layers[0].size = ghes_hw.num_dimms; + layers[0].is_virt_csrow = true; + + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(struct ghes_pvt)); + if (!mci) { + pr_info("Can't allocate memory for EDAC data\n"); + rc = -ENOMEM; + goto unlock; + } + + pvt = mci->pvt_info; + pvt->mci = mci; + + mci->pdev = dev; + mci->mtype_cap = MEM_FLAG_EMPTY; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "ghes_edac.c"; + mci->ctl_name = "ghes_edac"; + mci->dev_name = "ghes"; + + if (fake) { + pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n"); + pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n"); + pr_info("work on such system. Use this driver with caution\n"); + } else if (idx < 0) { + pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n"); + pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n"); + pr_info("So, the end result of using this driver varies from vendor to vendor.\n"); + pr_info("If you find incorrect reports, please contact your hardware vendor\n"); + pr_info("to correct its BIOS.\n"); + pr_info("This system has %d DIMM sockets.\n", ghes_hw.num_dimms); + } + + if (!fake) { + struct dimm_info *src, *dst; + int i = 0; + + mci_for_each_dimm(mci, dst) { + src = &ghes_hw.dimms[i]; + + dst->idx = src->idx; + dst->smbios_handle = src->smbios_handle; + dst->nr_pages = src->nr_pages; + dst->mtype = src->mtype; + dst->edac_mode = src->edac_mode; + dst->dtype = src->dtype; + dst->grain = src->grain; + + /* + * If no src->label, preserve default label assigned + * from EDAC core. + */ + if (strlen(src->label)) + memcpy(dst->label, src->label, sizeof(src->label)); + + i++; + } + + } else { + struct dimm_info *dimm = edac_get_dimm(mci, 0, 0, 0); + + dimm->nr_pages = 1; + dimm->grain = 128; + dimm->mtype = MEM_UNKNOWN; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_SECDED; + } + + rc = edac_mc_add_mc(mci); + if (rc < 0) { + pr_info("Can't register with the EDAC core\n"); + edac_mc_free(mci); + rc = -ENODEV; + goto unlock; + } + + spin_lock_irqsave(&ghes_lock, flags); + ghes_pvt = pvt; + spin_unlock_irqrestore(&ghes_lock, flags); + + /* only set on success */ + refcount_set(&ghes_refcount, 1); + +unlock: + + /* Not needed anymore */ + kfree(ghes_hw.dimms); + ghes_hw.dimms = NULL; + + mutex_unlock(&ghes_reg_mutex); + + return rc; +} + +void ghes_edac_unregister(struct ghes *ghes) +{ + struct mem_ctl_info *mci; + unsigned long flags; + + if (!force_load) + return; + + mutex_lock(&ghes_reg_mutex); + + system_scanned = false; + memset(&ghes_hw, 0, sizeof(struct ghes_hw_desc)); + + if (!refcount_dec_and_test(&ghes_refcount)) + goto unlock; + + /* + * Wait for the irq handler being finished. + */ + spin_lock_irqsave(&ghes_lock, flags); + mci = ghes_pvt ? ghes_pvt->mci : NULL; + ghes_pvt = NULL; + spin_unlock_irqrestore(&ghes_lock, flags); + + if (!mci) + goto unlock; + + mci = edac_mc_del_mc(mci->pdev); + if (mci) + edac_mc_free(mci); + +unlock: + mutex_unlock(&ghes_reg_mutex); +} diff --git a/drivers/edac/highbank_l2_edac.c b/drivers/edac/highbank_l2_edac.c new file mode 100644 index 000000000..c4549cec7 --- /dev/null +++ b/drivers/edac/highbank_l2_edac.c @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2011-2012 Calxeda, Inc. + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> + +#include "edac_module.h" + +#define SR_CLR_SB_ECC_INTR 0x0 +#define SR_CLR_DB_ECC_INTR 0x4 + +struct hb_l2_drvdata { + void __iomem *base; + int sb_irq; + int db_irq; +}; + +static irqreturn_t highbank_l2_err_handler(int irq, void *dev_id) +{ + struct edac_device_ctl_info *dci = dev_id; + struct hb_l2_drvdata *drvdata = dci->pvt_info; + + if (irq == drvdata->sb_irq) { + writel(1, drvdata->base + SR_CLR_SB_ECC_INTR); + edac_device_handle_ce(dci, 0, 0, dci->ctl_name); + } + if (irq == drvdata->db_irq) { + writel(1, drvdata->base + SR_CLR_DB_ECC_INTR); + edac_device_handle_ue(dci, 0, 0, dci->ctl_name); + } + + return IRQ_HANDLED; +} + +static const struct of_device_id hb_l2_err_of_match[] = { + { .compatible = "calxeda,hb-sregs-l2-ecc", }, + {}, +}; +MODULE_DEVICE_TABLE(of, hb_l2_err_of_match); + +static int highbank_l2_err_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + struct edac_device_ctl_info *dci; + struct hb_l2_drvdata *drvdata; + struct resource *r; + int res = 0; + + dci = edac_device_alloc_ctl_info(sizeof(*drvdata), "cpu", + 1, "L", 1, 2, NULL, 0, 0); + if (!dci) + return -ENOMEM; + + drvdata = dci->pvt_info; + dci->dev = &pdev->dev; + platform_set_drvdata(pdev, dci); + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "Unable to get mem resource\n"); + res = -ENODEV; + goto err; + } + + if (!devm_request_mem_region(&pdev->dev, r->start, + resource_size(r), dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "Error while requesting mem region\n"); + res = -EBUSY; + goto err; + } + + drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!drvdata->base) { + dev_err(&pdev->dev, "Unable to map regs\n"); + res = -ENOMEM; + goto err; + } + + id = of_match_device(hb_l2_err_of_match, &pdev->dev); + dci->mod_name = pdev->dev.driver->name; + dci->ctl_name = id ? id->compatible : "unknown"; + dci->dev_name = dev_name(&pdev->dev); + + if (edac_device_add_device(dci)) + goto err; + + drvdata->db_irq = platform_get_irq(pdev, 0); + res = devm_request_irq(&pdev->dev, drvdata->db_irq, + highbank_l2_err_handler, + 0, dev_name(&pdev->dev), dci); + if (res < 0) + goto err2; + + drvdata->sb_irq = platform_get_irq(pdev, 1); + res = devm_request_irq(&pdev->dev, drvdata->sb_irq, + highbank_l2_err_handler, + 0, dev_name(&pdev->dev), dci); + if (res < 0) + goto err2; + + devres_close_group(&pdev->dev, NULL); + return 0; +err2: + edac_device_del_device(&pdev->dev); +err: + devres_release_group(&pdev->dev, NULL); + edac_device_free_ctl_info(dci); + return res; +} + +static int highbank_l2_err_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev); + + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(dci); + return 0; +} + +static struct platform_driver highbank_l2_edac_driver = { + .probe = highbank_l2_err_probe, + .remove = highbank_l2_err_remove, + .driver = { + .name = "hb_l2_edac", + .of_match_table = hb_l2_err_of_match, + }, +}; + +module_platform_driver(highbank_l2_edac_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Calxeda, Inc."); +MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank L2 Cache"); diff --git a/drivers/edac/highbank_mc_edac.c b/drivers/edac/highbank_mc_edac.c new file mode 100644 index 000000000..19fba258a --- /dev/null +++ b/drivers/edac/highbank_mc_edac.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2011-2012 Calxeda, Inc. + */ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/uaccess.h> + +#include "edac_module.h" + +/* DDR Ctrlr Error Registers */ + +#define HB_DDR_ECC_ERR_BASE 0x128 +#define MW_DDR_ECC_ERR_BASE 0x1b4 + +#define HB_DDR_ECC_OPT 0x00 +#define HB_DDR_ECC_U_ERR_ADDR 0x08 +#define HB_DDR_ECC_U_ERR_STAT 0x0c +#define HB_DDR_ECC_U_ERR_DATAL 0x10 +#define HB_DDR_ECC_U_ERR_DATAH 0x14 +#define HB_DDR_ECC_C_ERR_ADDR 0x18 +#define HB_DDR_ECC_C_ERR_STAT 0x1c +#define HB_DDR_ECC_C_ERR_DATAL 0x20 +#define HB_DDR_ECC_C_ERR_DATAH 0x24 + +#define HB_DDR_ECC_OPT_MODE_MASK 0x3 +#define HB_DDR_ECC_OPT_FWC 0x100 +#define HB_DDR_ECC_OPT_XOR_SHIFT 16 + +/* DDR Ctrlr Interrupt Registers */ + +#define HB_DDR_ECC_INT_BASE 0x180 +#define MW_DDR_ECC_INT_BASE 0x218 + +#define HB_DDR_ECC_INT_STATUS 0x00 +#define HB_DDR_ECC_INT_ACK 0x04 + +#define HB_DDR_ECC_INT_STAT_CE 0x8 +#define HB_DDR_ECC_INT_STAT_DOUBLE_CE 0x10 +#define HB_DDR_ECC_INT_STAT_UE 0x20 +#define HB_DDR_ECC_INT_STAT_DOUBLE_UE 0x40 + +struct hb_mc_drvdata { + void __iomem *mc_err_base; + void __iomem *mc_int_base; +}; + +static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct hb_mc_drvdata *drvdata = mci->pvt_info; + u32 status, err_addr; + + /* Read the interrupt status register */ + status = readl(drvdata->mc_int_base + HB_DDR_ECC_INT_STATUS); + + if (status & HB_DDR_ECC_INT_STAT_UE) { + err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_U_ERR_ADDR); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, 0, + 0, 0, -1, + mci->ctl_name, ""); + } + if (status & HB_DDR_ECC_INT_STAT_CE) { + u32 syndrome = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_STAT); + syndrome = (syndrome >> 8) & 0xff; + err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_ADDR); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, syndrome, + 0, 0, -1, + mci->ctl_name, ""); + } + + /* clear the error, clears the interrupt */ + writel(status, drvdata->mc_int_base + HB_DDR_ECC_INT_ACK); + return IRQ_HANDLED; +} + +static void highbank_mc_err_inject(struct mem_ctl_info *mci, u8 synd) +{ + struct hb_mc_drvdata *pdata = mci->pvt_info; + u32 reg; + + reg = readl(pdata->mc_err_base + HB_DDR_ECC_OPT); + reg &= HB_DDR_ECC_OPT_MODE_MASK; + reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC; + writel(reg, pdata->mc_err_base + HB_DDR_ECC_OPT); +} + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +static ssize_t highbank_mc_inject_ctrl(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + u8 synd; + + if (kstrtou8(buf, 16, &synd)) + return -EINVAL; + + highbank_mc_err_inject(mci, synd); + + return count; +} + +static DEVICE_ATTR(inject_ctrl, S_IWUSR, NULL, highbank_mc_inject_ctrl); + +static struct attribute *highbank_dev_attrs[] = { + &dev_attr_inject_ctrl.attr, + NULL +}; + +ATTRIBUTE_GROUPS(highbank_dev); + +struct hb_mc_settings { + int err_offset; + int int_offset; +}; + +static struct hb_mc_settings hb_settings = { + .err_offset = HB_DDR_ECC_ERR_BASE, + .int_offset = HB_DDR_ECC_INT_BASE, +}; + +static struct hb_mc_settings mw_settings = { + .err_offset = MW_DDR_ECC_ERR_BASE, + .int_offset = MW_DDR_ECC_INT_BASE, +}; + +static const struct of_device_id hb_ddr_ctrl_of_match[] = { + { .compatible = "calxeda,hb-ddr-ctrl", .data = &hb_settings }, + { .compatible = "calxeda,ecx-2000-ddr-ctrl", .data = &mw_settings }, + {}, +}; +MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match); + +static int highbank_mc_probe(struct platform_device *pdev) +{ + const struct of_device_id *id; + const struct hb_mc_settings *settings; + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct hb_mc_drvdata *drvdata; + struct dimm_info *dimm; + struct resource *r; + void __iomem *base; + u32 control; + int irq; + int res = 0; + + id = of_match_device(hb_ddr_ctrl_of_match, &pdev->dev); + if (!id) + return -ENODEV; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 1; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 1; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct hb_mc_drvdata)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + drvdata = mci->pvt_info; + platform_set_drvdata(pdev, mci); + + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) { + res = -ENOMEM; + goto free; + } + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!r) { + dev_err(&pdev->dev, "Unable to get mem resource\n"); + res = -ENODEV; + goto err; + } + + if (!devm_request_mem_region(&pdev->dev, r->start, + resource_size(r), dev_name(&pdev->dev))) { + dev_err(&pdev->dev, "Error while requesting mem region\n"); + res = -EBUSY; + goto err; + } + + base = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (!base) { + dev_err(&pdev->dev, "Unable to map regs\n"); + res = -ENOMEM; + goto err; + } + + settings = id->data; + drvdata->mc_err_base = base + settings->err_offset; + drvdata->mc_int_base = base + settings->int_offset; + + control = readl(drvdata->mc_err_base + HB_DDR_ECC_OPT) & 0x3; + if (!control || (control == 0x2)) { + dev_err(&pdev->dev, "No ECC present, or ECC disabled\n"); + res = -ENODEV; + goto err; + } + + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = pdev->dev.driver->name; + mci->ctl_name = id->compatible; + mci->dev_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_SW_SRC; + + /* Only a single 4GB DIMM is supported */ + dimm = *mci->dimms; + dimm->nr_pages = (~0UL >> PAGE_SHIFT) + 1; + dimm->grain = 8; + dimm->dtype = DEV_X8; + dimm->mtype = MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + + res = edac_mc_add_mc_with_groups(mci, highbank_dev_groups); + if (res < 0) + goto err; + + irq = platform_get_irq(pdev, 0); + res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler, + 0, dev_name(&pdev->dev), mci); + if (res < 0) { + dev_err(&pdev->dev, "Unable to request irq %d\n", irq); + goto err2; + } + + devres_close_group(&pdev->dev, NULL); + return 0; +err2: + edac_mc_del_mc(&pdev->dev); +err: + devres_release_group(&pdev->dev, NULL); +free: + edac_mc_free(mci); + return res; +} + +static int highbank_mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + return 0; +} + +static struct platform_driver highbank_mc_edac_driver = { + .probe = highbank_mc_probe, + .remove = highbank_mc_remove, + .driver = { + .name = "hb_mc_edac", + .of_match_table = hb_ddr_ctrl_of_match, + }, +}; + +module_platform_driver(highbank_mc_edac_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Calxeda, Inc."); +MODULE_DESCRIPTION("EDAC Driver for Calxeda Highbank"); diff --git a/drivers/edac/i10nm_base.c b/drivers/edac/i10nm_base.c new file mode 100644 index 000000000..8af4d2523 --- /dev/null +++ b/drivers/edac/i10nm_base.c @@ -0,0 +1,903 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Intel(R) 10nm server memory controller. + * Copyright (c) 2019, Intel Corporation. + * + */ + +#include <linux/kernel.h> +#include <linux/io.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/mce.h> +#include "edac_module.h" +#include "skx_common.h" + +#define I10NM_REVISION "v0.0.5" +#define EDAC_MOD_STR "i10nm_edac" + +/* Debug macros */ +#define i10nm_printk(level, fmt, arg...) \ + edac_printk(level, "i10nm", fmt, ##arg) + +#define I10NM_GET_SCK_BAR(d, reg) \ + pci_read_config_dword((d)->uracu, 0xd0, &(reg)) +#define I10NM_GET_IMC_BAR(d, i, reg) \ + pci_read_config_dword((d)->uracu, 0xd8 + (i) * 4, &(reg)) +#define I10NM_GET_SAD(d, offset, i, reg)\ + pci_read_config_dword((d)->sad_all, (offset) + (i) * 8, &(reg)) +#define I10NM_GET_HBM_IMC_BAR(d, reg) \ + pci_read_config_dword((d)->uracu, 0xd4, &(reg)) +#define I10NM_GET_CAPID3_CFG(d, reg) \ + pci_read_config_dword((d)->pcu_cr3, 0x90, &(reg)) +#define I10NM_GET_DIMMMTR(m, i, j) \ + readl((m)->mbase + ((m)->hbm_mc ? 0x80c : 0x2080c) + \ + (i) * (m)->chan_mmio_sz + (j) * 4) +#define I10NM_GET_MCDDRTCFG(m, i) \ + readl((m)->mbase + ((m)->hbm_mc ? 0x970 : 0x20970) + \ + (i) * (m)->chan_mmio_sz) +#define I10NM_GET_MCMTR(m, i) \ + readl((m)->mbase + ((m)->hbm_mc ? 0xef8 : 0x20ef8) + \ + (i) * (m)->chan_mmio_sz) +#define I10NM_GET_AMAP(m, i) \ + readl((m)->mbase + ((m)->hbm_mc ? 0x814 : 0x20814) + \ + (i) * (m)->chan_mmio_sz) +#define I10NM_GET_REG32(m, i, offset) \ + readl((m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) +#define I10NM_GET_REG64(m, i, offset) \ + readq((m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) +#define I10NM_SET_REG32(m, i, offset, v) \ + writel(v, (m)->mbase + (i) * (m)->chan_mmio_sz + (offset)) + +#define I10NM_GET_SCK_MMIO_BASE(reg) (GET_BITFIELD(reg, 0, 28) << 23) +#define I10NM_GET_IMC_MMIO_OFFSET(reg) (GET_BITFIELD(reg, 0, 10) << 12) +#define I10NM_GET_IMC_MMIO_SIZE(reg) ((GET_BITFIELD(reg, 13, 23) - \ + GET_BITFIELD(reg, 0, 10) + 1) << 12) +#define I10NM_GET_HBM_IMC_MMIO_OFFSET(reg) \ + ((GET_BITFIELD(reg, 0, 10) << 12) + 0x140000) + +#define I10NM_HBM_IMC_MMIO_SIZE 0x9000 +#define I10NM_IS_HBM_PRESENT(reg) GET_BITFIELD(reg, 27, 30) +#define I10NM_IS_HBM_IMC(reg) GET_BITFIELD(reg, 29, 29) + +#define I10NM_MAX_SAD 16 +#define I10NM_SAD_ENABLE(reg) GET_BITFIELD(reg, 0, 0) +#define I10NM_SAD_NM_CACHEABLE(reg) GET_BITFIELD(reg, 5, 5) + +#define RETRY_RD_ERR_LOG_UC BIT(1) +#define RETRY_RD_ERR_LOG_NOOVER BIT(14) +#define RETRY_RD_ERR_LOG_EN BIT(15) +#define RETRY_RD_ERR_LOG_NOOVER_UC (BIT(14) | BIT(1)) +#define RETRY_RD_ERR_LOG_OVER_UC_V (BIT(2) | BIT(1) | BIT(0)) + +static struct list_head *i10nm_edac_list; + +static struct res_config *res_cfg; +static int retry_rd_err_log; +static int decoding_via_mca; +static bool mem_cfg_2lm; + +static u32 offsets_scrub_icx[] = {0x22c60, 0x22c54, 0x22c5c, 0x22c58, 0x22c28, 0x20ed8}; +static u32 offsets_scrub_spr[] = {0x22c60, 0x22c54, 0x22f08, 0x22c58, 0x22c28, 0x20ed8}; +static u32 offsets_scrub_spr_hbm0[] = {0x2860, 0x2854, 0x2b08, 0x2858, 0x2828, 0x0ed8}; +static u32 offsets_scrub_spr_hbm1[] = {0x2c60, 0x2c54, 0x2f08, 0x2c58, 0x2c28, 0x0fa8}; +static u32 offsets_demand_icx[] = {0x22e54, 0x22e60, 0x22e64, 0x22e58, 0x22e5c, 0x20ee0}; +static u32 offsets_demand_spr[] = {0x22e54, 0x22e60, 0x22f10, 0x22e58, 0x22e5c, 0x20ee0}; +static u32 offsets_demand2_spr[] = {0x22c70, 0x22d80, 0x22f18, 0x22d58, 0x22c64, 0x20f10}; +static u32 offsets_demand_spr_hbm0[] = {0x2a54, 0x2a60, 0x2b10, 0x2a58, 0x2a5c, 0x0ee0}; +static u32 offsets_demand_spr_hbm1[] = {0x2e54, 0x2e60, 0x2f10, 0x2e58, 0x2e5c, 0x0fb0}; + +static void __enable_retry_rd_err_log(struct skx_imc *imc, int chan, bool enable, + u32 *offsets_scrub, u32 *offsets_demand, + u32 *offsets_demand2) +{ + u32 s, d, d2; + + s = I10NM_GET_REG32(imc, chan, offsets_scrub[0]); + d = I10NM_GET_REG32(imc, chan, offsets_demand[0]); + if (offsets_demand2) + d2 = I10NM_GET_REG32(imc, chan, offsets_demand2[0]); + + if (enable) { + /* Save default configurations */ + imc->chan[chan].retry_rd_err_log_s = s; + imc->chan[chan].retry_rd_err_log_d = d; + if (offsets_demand2) + imc->chan[chan].retry_rd_err_log_d2 = d2; + + s &= ~RETRY_RD_ERR_LOG_NOOVER_UC; + s |= RETRY_RD_ERR_LOG_EN; + d &= ~RETRY_RD_ERR_LOG_NOOVER_UC; + d |= RETRY_RD_ERR_LOG_EN; + + if (offsets_demand2) { + d2 &= ~RETRY_RD_ERR_LOG_UC; + d2 |= RETRY_RD_ERR_LOG_NOOVER; + d2 |= RETRY_RD_ERR_LOG_EN; + } + } else { + /* Restore default configurations */ + if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_UC) + s |= RETRY_RD_ERR_LOG_UC; + if (imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_NOOVER) + s |= RETRY_RD_ERR_LOG_NOOVER; + if (!(imc->chan[chan].retry_rd_err_log_s & RETRY_RD_ERR_LOG_EN)) + s &= ~RETRY_RD_ERR_LOG_EN; + if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_UC) + d |= RETRY_RD_ERR_LOG_UC; + if (imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_NOOVER) + d |= RETRY_RD_ERR_LOG_NOOVER; + if (!(imc->chan[chan].retry_rd_err_log_d & RETRY_RD_ERR_LOG_EN)) + d &= ~RETRY_RD_ERR_LOG_EN; + + if (offsets_demand2) { + if (imc->chan[chan].retry_rd_err_log_d2 & RETRY_RD_ERR_LOG_UC) + d2 |= RETRY_RD_ERR_LOG_UC; + if (!(imc->chan[chan].retry_rd_err_log_d2 & RETRY_RD_ERR_LOG_NOOVER)) + d2 &= ~RETRY_RD_ERR_LOG_NOOVER; + if (!(imc->chan[chan].retry_rd_err_log_d2 & RETRY_RD_ERR_LOG_EN)) + d2 &= ~RETRY_RD_ERR_LOG_EN; + } + } + + I10NM_SET_REG32(imc, chan, offsets_scrub[0], s); + I10NM_SET_REG32(imc, chan, offsets_demand[0], d); + if (offsets_demand2) + I10NM_SET_REG32(imc, chan, offsets_demand2[0], d2); +} + +static void enable_retry_rd_err_log(bool enable) +{ + struct skx_imc *imc; + struct skx_dev *d; + int i, j; + + edac_dbg(2, "\n"); + + list_for_each_entry(d, i10nm_edac_list, list) + for (i = 0; i < I10NM_NUM_IMC; i++) { + imc = &d->imc[i]; + if (!imc->mbase) + continue; + + for (j = 0; j < I10NM_NUM_CHANNELS; j++) { + if (imc->hbm_mc) { + __enable_retry_rd_err_log(imc, j, enable, + res_cfg->offsets_scrub_hbm0, + res_cfg->offsets_demand_hbm0, + NULL); + __enable_retry_rd_err_log(imc, j, enable, + res_cfg->offsets_scrub_hbm1, + res_cfg->offsets_demand_hbm1, + NULL); + } else { + __enable_retry_rd_err_log(imc, j, enable, + res_cfg->offsets_scrub, + res_cfg->offsets_demand, + res_cfg->offsets_demand2); + } + } + } +} + +static void show_retry_rd_err_log(struct decoded_addr *res, char *msg, + int len, bool scrub_err) +{ + struct skx_imc *imc = &res->dev->imc[res->imc]; + u32 log0, log1, log2, log3, log4; + u32 corr0, corr1, corr2, corr3; + u32 lxg0, lxg1, lxg3, lxg4; + u32 *xffsets = NULL; + u64 log2a, log5; + u64 lxg2a, lxg5; + u32 *offsets; + int n, pch; + + if (!imc->mbase) + return; + + if (imc->hbm_mc) { + pch = res->cs & 1; + + if (pch) + offsets = scrub_err ? res_cfg->offsets_scrub_hbm1 : + res_cfg->offsets_demand_hbm1; + else + offsets = scrub_err ? res_cfg->offsets_scrub_hbm0 : + res_cfg->offsets_demand_hbm0; + } else { + if (scrub_err) { + offsets = res_cfg->offsets_scrub; + } else { + offsets = res_cfg->offsets_demand; + xffsets = res_cfg->offsets_demand2; + } + } + + log0 = I10NM_GET_REG32(imc, res->channel, offsets[0]); + log1 = I10NM_GET_REG32(imc, res->channel, offsets[1]); + log3 = I10NM_GET_REG32(imc, res->channel, offsets[3]); + log4 = I10NM_GET_REG32(imc, res->channel, offsets[4]); + log5 = I10NM_GET_REG64(imc, res->channel, offsets[5]); + + if (xffsets) { + lxg0 = I10NM_GET_REG32(imc, res->channel, xffsets[0]); + lxg1 = I10NM_GET_REG32(imc, res->channel, xffsets[1]); + lxg3 = I10NM_GET_REG32(imc, res->channel, xffsets[3]); + lxg4 = I10NM_GET_REG32(imc, res->channel, xffsets[4]); + lxg5 = I10NM_GET_REG64(imc, res->channel, xffsets[5]); + } + + if (res_cfg->type == SPR) { + log2a = I10NM_GET_REG64(imc, res->channel, offsets[2]); + n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.16llx %.8x %.8x %.16llx", + log0, log1, log2a, log3, log4, log5); + + if (len - n > 0) { + if (xffsets) { + lxg2a = I10NM_GET_REG64(imc, res->channel, xffsets[2]); + n += snprintf(msg + n, len - n, " %.8x %.8x %.16llx %.8x %.8x %.16llx]", + lxg0, lxg1, lxg2a, lxg3, lxg4, lxg5); + } else { + n += snprintf(msg + n, len - n, "]"); + } + } + } else { + log2 = I10NM_GET_REG32(imc, res->channel, offsets[2]); + n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.8x %.8x %.8x %.16llx]", + log0, log1, log2, log3, log4, log5); + } + + if (imc->hbm_mc) { + if (pch) { + corr0 = I10NM_GET_REG32(imc, res->channel, 0x2c18); + corr1 = I10NM_GET_REG32(imc, res->channel, 0x2c1c); + corr2 = I10NM_GET_REG32(imc, res->channel, 0x2c20); + corr3 = I10NM_GET_REG32(imc, res->channel, 0x2c24); + } else { + corr0 = I10NM_GET_REG32(imc, res->channel, 0x2818); + corr1 = I10NM_GET_REG32(imc, res->channel, 0x281c); + corr2 = I10NM_GET_REG32(imc, res->channel, 0x2820); + corr3 = I10NM_GET_REG32(imc, res->channel, 0x2824); + } + } else { + corr0 = I10NM_GET_REG32(imc, res->channel, 0x22c18); + corr1 = I10NM_GET_REG32(imc, res->channel, 0x22c1c); + corr2 = I10NM_GET_REG32(imc, res->channel, 0x22c20); + corr3 = I10NM_GET_REG32(imc, res->channel, 0x22c24); + } + + if (len - n > 0) + snprintf(msg + n, len - n, + " correrrcnt[%.4x %.4x %.4x %.4x %.4x %.4x %.4x %.4x]", + corr0 & 0xffff, corr0 >> 16, + corr1 & 0xffff, corr1 >> 16, + corr2 & 0xffff, corr2 >> 16, + corr3 & 0xffff, corr3 >> 16); + + /* Clear status bits */ + if (retry_rd_err_log == 2) { + if (log0 & RETRY_RD_ERR_LOG_OVER_UC_V) { + log0 &= ~RETRY_RD_ERR_LOG_OVER_UC_V; + I10NM_SET_REG32(imc, res->channel, offsets[0], log0); + } + + if (xffsets && (lxg0 & RETRY_RD_ERR_LOG_OVER_UC_V)) { + lxg0 &= ~RETRY_RD_ERR_LOG_OVER_UC_V; + I10NM_SET_REG32(imc, res->channel, xffsets[0], lxg0); + } + } +} + +static struct pci_dev *pci_get_dev_wrapper(int dom, unsigned int bus, + unsigned int dev, unsigned int fun) +{ + struct pci_dev *pdev; + + pdev = pci_get_domain_bus_and_slot(dom, bus, PCI_DEVFN(dev, fun)); + if (!pdev) { + edac_dbg(2, "No device %02x:%02x.%x\n", + bus, dev, fun); + return NULL; + } + + if (unlikely(pci_enable_device(pdev) < 0)) { + edac_dbg(2, "Failed to enable device %02x:%02x.%x\n", + bus, dev, fun); + pci_dev_put(pdev); + return NULL; + } + + return pdev; +} + +static bool i10nm_check_2lm(struct res_config *cfg) +{ + struct skx_dev *d; + u32 reg; + int i; + + list_for_each_entry(d, i10nm_edac_list, list) { + d->sad_all = pci_get_dev_wrapper(d->seg, d->bus[1], + PCI_SLOT(cfg->sad_all_devfn), + PCI_FUNC(cfg->sad_all_devfn)); + if (!d->sad_all) + continue; + + for (i = 0; i < I10NM_MAX_SAD; i++) { + I10NM_GET_SAD(d, cfg->sad_all_offset, i, reg); + if (I10NM_SAD_ENABLE(reg) && I10NM_SAD_NM_CACHEABLE(reg)) { + edac_dbg(2, "2-level memory configuration.\n"); + return true; + } + } + } + + return false; +} + +/* + * Check whether the error comes from DDRT by ICX/Tremont model specific error code. + * Refer to SDM vol3B 16.11.3 Intel IMC MC error codes for IA32_MCi_STATUS. + */ +static bool i10nm_mscod_is_ddrt(u32 mscod) +{ + switch (mscod) { + case 0x0106: case 0x0107: + case 0x0800: case 0x0804: + case 0x0806 ... 0x0808: + case 0x080a ... 0x080e: + case 0x0810: case 0x0811: + case 0x0816: case 0x081e: + case 0x081f: + return true; + } + + return false; +} + +static bool i10nm_mc_decode_available(struct mce *mce) +{ + u8 bank; + + if (!decoding_via_mca || mem_cfg_2lm) + return false; + + if ((mce->status & (MCI_STATUS_MISCV | MCI_STATUS_ADDRV)) + != (MCI_STATUS_MISCV | MCI_STATUS_ADDRV)) + return false; + + bank = mce->bank; + + switch (res_cfg->type) { + case I10NM: + if (bank < 13 || bank > 26) + return false; + + /* DDRT errors can't be decoded from MCA bank registers */ + if (MCI_MISC_ECC_MODE(mce->misc) == MCI_MISC_ECC_DDRT) + return false; + + if (i10nm_mscod_is_ddrt(MCI_STATUS_MSCOD(mce->status))) + return false; + + /* Check whether one of {13,14,17,18,21,22,25,26} */ + return ((bank - 13) & BIT(1)) == 0; + default: + return false; + } +} + +static bool i10nm_mc_decode(struct decoded_addr *res) +{ + struct mce *m = res->mce; + struct skx_dev *d; + u8 bank; + + if (!i10nm_mc_decode_available(m)) + return false; + + list_for_each_entry(d, i10nm_edac_list, list) { + if (d->imc[0].src_id == m->socketid) { + res->socket = m->socketid; + res->dev = d; + break; + } + } + + switch (res_cfg->type) { + case I10NM: + bank = m->bank - 13; + res->imc = bank / 4; + res->channel = bank % 2; + break; + default: + return false; + } + + if (!res->dev) { + skx_printk(KERN_ERR, "No device for src_id %d imc %d\n", + m->socketid, res->imc); + return false; + } + + res->column = GET_BITFIELD(m->misc, 9, 18) << 2; + res->row = GET_BITFIELD(m->misc, 19, 39); + res->bank_group = GET_BITFIELD(m->misc, 40, 41); + res->bank_address = GET_BITFIELD(m->misc, 42, 43); + res->bank_group |= GET_BITFIELD(m->misc, 44, 44) << 2; + res->rank = GET_BITFIELD(m->misc, 56, 58); + res->dimm = res->rank >> 2; + res->rank = res->rank % 4; + + return true; +} + +static int i10nm_get_ddr_munits(void) +{ + struct pci_dev *mdev; + void __iomem *mbase; + unsigned long size; + struct skx_dev *d; + int i, j = 0; + u32 reg, off; + u64 base; + + list_for_each_entry(d, i10nm_edac_list, list) { + d->util_all = pci_get_dev_wrapper(d->seg, d->bus[1], 29, 1); + if (!d->util_all) + return -ENODEV; + + d->uracu = pci_get_dev_wrapper(d->seg, d->bus[0], 0, 1); + if (!d->uracu) + return -ENODEV; + + if (I10NM_GET_SCK_BAR(d, reg)) { + i10nm_printk(KERN_ERR, "Failed to socket bar\n"); + return -ENODEV; + } + + base = I10NM_GET_SCK_MMIO_BASE(reg); + edac_dbg(2, "socket%d mmio base 0x%llx (reg 0x%x)\n", + j++, base, reg); + + for (i = 0; i < I10NM_NUM_DDR_IMC; i++) { + mdev = pci_get_dev_wrapper(d->seg, d->bus[0], + 12 + i, 0); + if (i == 0 && !mdev) { + i10nm_printk(KERN_ERR, "No IMC found\n"); + return -ENODEV; + } + if (!mdev) + continue; + + d->imc[i].mdev = mdev; + + if (I10NM_GET_IMC_BAR(d, i, reg)) { + i10nm_printk(KERN_ERR, "Failed to get mc bar\n"); + return -ENODEV; + } + + off = I10NM_GET_IMC_MMIO_OFFSET(reg); + size = I10NM_GET_IMC_MMIO_SIZE(reg); + edac_dbg(2, "mc%d mmio base 0x%llx size 0x%lx (reg 0x%x)\n", + i, base + off, size, reg); + + mbase = ioremap(base + off, size); + if (!mbase) { + i10nm_printk(KERN_ERR, "Failed to ioremap 0x%llx\n", + base + off); + return -ENODEV; + } + + d->imc[i].mbase = mbase; + } + } + + return 0; +} + +static bool i10nm_check_hbm_imc(struct skx_dev *d) +{ + u32 reg; + + if (I10NM_GET_CAPID3_CFG(d, reg)) { + i10nm_printk(KERN_ERR, "Failed to get capid3_cfg\n"); + return false; + } + + return I10NM_IS_HBM_PRESENT(reg) != 0; +} + +static int i10nm_get_hbm_munits(void) +{ + struct pci_dev *mdev; + void __iomem *mbase; + u32 reg, off, mcmtr; + struct skx_dev *d; + int i, lmc; + u64 base; + + list_for_each_entry(d, i10nm_edac_list, list) { + d->pcu_cr3 = pci_get_dev_wrapper(d->seg, d->bus[1], 30, 3); + if (!d->pcu_cr3) + return -ENODEV; + + if (!i10nm_check_hbm_imc(d)) { + i10nm_printk(KERN_DEBUG, "No hbm memory\n"); + return -ENODEV; + } + + if (I10NM_GET_SCK_BAR(d, reg)) { + i10nm_printk(KERN_ERR, "Failed to get socket bar\n"); + return -ENODEV; + } + base = I10NM_GET_SCK_MMIO_BASE(reg); + + if (I10NM_GET_HBM_IMC_BAR(d, reg)) { + i10nm_printk(KERN_ERR, "Failed to get hbm mc bar\n"); + return -ENODEV; + } + base += I10NM_GET_HBM_IMC_MMIO_OFFSET(reg); + + lmc = I10NM_NUM_DDR_IMC; + + for (i = 0; i < I10NM_NUM_HBM_IMC; i++) { + mdev = pci_get_dev_wrapper(d->seg, d->bus[0], + 12 + i / 4, 1 + i % 4); + if (i == 0 && !mdev) { + i10nm_printk(KERN_ERR, "No hbm mc found\n"); + return -ENODEV; + } + if (!mdev) + continue; + + d->imc[lmc].mdev = mdev; + off = i * I10NM_HBM_IMC_MMIO_SIZE; + + edac_dbg(2, "hbm mc%d mmio base 0x%llx size 0x%x\n", + lmc, base + off, I10NM_HBM_IMC_MMIO_SIZE); + + mbase = ioremap(base + off, I10NM_HBM_IMC_MMIO_SIZE); + if (!mbase) { + pci_dev_put(d->imc[lmc].mdev); + d->imc[lmc].mdev = NULL; + + i10nm_printk(KERN_ERR, "Failed to ioremap for hbm mc 0x%llx\n", + base + off); + return -ENOMEM; + } + + d->imc[lmc].mbase = mbase; + d->imc[lmc].hbm_mc = true; + + mcmtr = I10NM_GET_MCMTR(&d->imc[lmc], 0); + if (!I10NM_IS_HBM_IMC(mcmtr)) { + iounmap(d->imc[lmc].mbase); + d->imc[lmc].mbase = NULL; + d->imc[lmc].hbm_mc = false; + pci_dev_put(d->imc[lmc].mdev); + d->imc[lmc].mdev = NULL; + + i10nm_printk(KERN_ERR, "This isn't an hbm mc!\n"); + return -ENODEV; + } + + lmc++; + } + } + + return 0; +} + +static struct res_config i10nm_cfg0 = { + .type = I10NM, + .decs_did = 0x3452, + .busno_cfg_offset = 0xcc, + .ddr_chan_mmio_sz = 0x4000, + .sad_all_devfn = PCI_DEVFN(29, 0), + .sad_all_offset = 0x108, + .offsets_scrub = offsets_scrub_icx, + .offsets_demand = offsets_demand_icx, +}; + +static struct res_config i10nm_cfg1 = { + .type = I10NM, + .decs_did = 0x3452, + .busno_cfg_offset = 0xd0, + .ddr_chan_mmio_sz = 0x4000, + .sad_all_devfn = PCI_DEVFN(29, 0), + .sad_all_offset = 0x108, + .offsets_scrub = offsets_scrub_icx, + .offsets_demand = offsets_demand_icx, +}; + +static struct res_config spr_cfg = { + .type = SPR, + .decs_did = 0x3252, + .busno_cfg_offset = 0xd0, + .ddr_chan_mmio_sz = 0x8000, + .hbm_chan_mmio_sz = 0x4000, + .support_ddr5 = true, + .sad_all_devfn = PCI_DEVFN(10, 0), + .sad_all_offset = 0x300, + .offsets_scrub = offsets_scrub_spr, + .offsets_scrub_hbm0 = offsets_scrub_spr_hbm0, + .offsets_scrub_hbm1 = offsets_scrub_spr_hbm1, + .offsets_demand = offsets_demand_spr, + .offsets_demand2 = offsets_demand2_spr, + .offsets_demand_hbm0 = offsets_demand_spr_hbm0, + .offsets_demand_hbm1 = offsets_demand_spr_hbm1, +}; + +static const struct x86_cpu_id i10nm_cpuids[] = { + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPINGS(0x0, 0x3), &i10nm_cfg0), + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ATOM_TREMONT_D, X86_STEPPINGS(0x4, 0xf), &i10nm_cfg1), + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_X, X86_STEPPINGS(0x0, 0x3), &i10nm_cfg0), + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_X, X86_STEPPINGS(0x4, 0xf), &i10nm_cfg1), + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(ICELAKE_D, X86_STEPPINGS(0x0, 0xf), &i10nm_cfg1), + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(SAPPHIRERAPIDS_X, X86_STEPPINGS(0x0, 0xf), &spr_cfg), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, i10nm_cpuids); + +static bool i10nm_check_ecc(struct skx_imc *imc, int chan) +{ + u32 mcmtr; + + mcmtr = I10NM_GET_MCMTR(imc, chan); + edac_dbg(1, "ch%d mcmtr reg %x\n", chan, mcmtr); + + return !!GET_BITFIELD(mcmtr, 2, 2); +} + +static int i10nm_get_dimm_config(struct mem_ctl_info *mci, + struct res_config *cfg) +{ + struct skx_pvt *pvt = mci->pvt_info; + struct skx_imc *imc = pvt->imc; + u32 mtr, amap, mcddrtcfg; + struct dimm_info *dimm; + int i, j, ndimms; + + for (i = 0; i < imc->num_channels; i++) { + if (!imc->mbase) + continue; + + ndimms = 0; + amap = I10NM_GET_AMAP(imc, i); + mcddrtcfg = I10NM_GET_MCDDRTCFG(imc, i); + for (j = 0; j < imc->num_dimms; j++) { + dimm = edac_get_dimm(mci, i, j, 0); + mtr = I10NM_GET_DIMMMTR(imc, i, j); + edac_dbg(1, "dimmmtr 0x%x mcddrtcfg 0x%x (mc%d ch%d dimm%d)\n", + mtr, mcddrtcfg, imc->mc, i, j); + + if (IS_DIMM_PRESENT(mtr)) + ndimms += skx_get_dimm_info(mtr, 0, amap, dimm, + imc, i, j, cfg); + else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) + ndimms += skx_get_nvdimm_info(dimm, imc, i, j, + EDAC_MOD_STR); + } + if (ndimms && !i10nm_check_ecc(imc, i)) { + i10nm_printk(KERN_ERR, "ECC is disabled on imc %d channel %d\n", + imc->mc, i); + return -ENODEV; + } + } + + return 0; +} + +static struct notifier_block i10nm_mce_dec = { + .notifier_call = skx_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +#ifdef CONFIG_EDAC_DEBUG +/* + * Debug feature. + * Exercise the address decode logic by writing an address to + * /sys/kernel/debug/edac/i10nm_test/addr. + */ +static struct dentry *i10nm_test; + +static int debugfs_u64_set(void *data, u64 val) +{ + struct mce m; + + pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); + + memset(&m, 0, sizeof(m)); + /* ADDRV + MemRd + Unknown channel */ + m.status = MCI_STATUS_ADDRV + 0x90; + /* One corrected error */ + m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT); + m.addr = val; + skx_mce_check_error(NULL, 0, &m); + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); + +static void setup_i10nm_debug(void) +{ + i10nm_test = edac_debugfs_create_dir("i10nm_test"); + if (!i10nm_test) + return; + + if (!edac_debugfs_create_file("addr", 0200, i10nm_test, + NULL, &fops_u64_wo)) { + debugfs_remove(i10nm_test); + i10nm_test = NULL; + } +} + +static void teardown_i10nm_debug(void) +{ + debugfs_remove_recursive(i10nm_test); +} +#else +static inline void setup_i10nm_debug(void) {} +static inline void teardown_i10nm_debug(void) {} +#endif /*CONFIG_EDAC_DEBUG*/ + +static int __init i10nm_init(void) +{ + u8 mc = 0, src_id = 0, node_id = 0; + const struct x86_cpu_id *id; + struct res_config *cfg; + const char *owner; + struct skx_dev *d; + int rc, i, off[3] = {0xd0, 0xc8, 0xcc}; + u64 tolm, tohm; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + id = x86_match_cpu(i10nm_cpuids); + if (!id) + return -ENODEV; + + cfg = (struct res_config *)id->driver_data; + res_cfg = cfg; + + rc = skx_get_hi_lo(0x09a2, off, &tolm, &tohm); + if (rc) + return rc; + + rc = skx_get_all_bus_mappings(cfg, &i10nm_edac_list); + if (rc < 0) + goto fail; + if (rc == 0) { + i10nm_printk(KERN_ERR, "No memory controllers found\n"); + return -ENODEV; + } + + mem_cfg_2lm = i10nm_check_2lm(cfg); + skx_set_mem_cfg(mem_cfg_2lm); + + rc = i10nm_get_ddr_munits(); + + if (i10nm_get_hbm_munits() && rc) + goto fail; + + list_for_each_entry(d, i10nm_edac_list, list) { + rc = skx_get_src_id(d, 0xf8, &src_id); + if (rc < 0) + goto fail; + + rc = skx_get_node_id(d, &node_id); + if (rc < 0) + goto fail; + + edac_dbg(2, "src_id = %d node_id = %d\n", src_id, node_id); + for (i = 0; i < I10NM_NUM_IMC; i++) { + if (!d->imc[i].mdev) + continue; + + d->imc[i].mc = mc++; + d->imc[i].lmc = i; + d->imc[i].src_id = src_id; + d->imc[i].node_id = node_id; + if (d->imc[i].hbm_mc) { + d->imc[i].chan_mmio_sz = cfg->hbm_chan_mmio_sz; + d->imc[i].num_channels = I10NM_NUM_HBM_CHANNELS; + d->imc[i].num_dimms = I10NM_NUM_HBM_DIMMS; + } else { + d->imc[i].chan_mmio_sz = cfg->ddr_chan_mmio_sz; + d->imc[i].num_channels = I10NM_NUM_DDR_CHANNELS; + d->imc[i].num_dimms = I10NM_NUM_DDR_DIMMS; + } + + rc = skx_register_mci(&d->imc[i], d->imc[i].mdev, + "Intel_10nm Socket", EDAC_MOD_STR, + i10nm_get_dimm_config, cfg); + if (rc < 0) + goto fail; + } + } + + rc = skx_adxl_get(); + if (rc) + goto fail; + + opstate_init(); + mce_register_decode_chain(&i10nm_mce_dec); + setup_i10nm_debug(); + + if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) { + skx_set_decode(i10nm_mc_decode, show_retry_rd_err_log); + if (retry_rd_err_log == 2) + enable_retry_rd_err_log(true); + } else { + skx_set_decode(i10nm_mc_decode, NULL); + } + + i10nm_printk(KERN_INFO, "%s\n", I10NM_REVISION); + + return 0; +fail: + skx_remove(); + return rc; +} + +static void __exit i10nm_exit(void) +{ + edac_dbg(2, "\n"); + + if (retry_rd_err_log && res_cfg->offsets_scrub && res_cfg->offsets_demand) { + skx_set_decode(NULL, NULL); + if (retry_rd_err_log == 2) + enable_retry_rd_err_log(false); + } + + teardown_i10nm_debug(); + mce_unregister_decode_chain(&i10nm_mce_dec); + skx_adxl_put(); + skx_remove(); +} + +module_init(i10nm_init); +module_exit(i10nm_exit); + +static int set_decoding_via_mca(const char *buf, const struct kernel_param *kp) +{ + unsigned long val; + int ret; + + ret = kstrtoul(buf, 0, &val); + + if (ret || val > 1) + return -EINVAL; + + if (val && mem_cfg_2lm) { + i10nm_printk(KERN_NOTICE, "Decoding errors via MCA banks for 2LM isn't supported yet\n"); + return -EIO; + } + + ret = param_set_int(buf, kp); + + return ret; +} + +static const struct kernel_param_ops decoding_via_mca_param_ops = { + .set = set_decoding_via_mca, + .get = param_get_int, +}; + +module_param_cb(decoding_via_mca, &decoding_via_mca_param_ops, &decoding_via_mca, 0644); +MODULE_PARM_DESC(decoding_via_mca, "decoding_via_mca: 0=off(default), 1=enable"); + +module_param(retry_rd_err_log, int, 0444); +MODULE_PARM_DESC(retry_rd_err_log, "retry_rd_err_log: 0=off(default), 1=bios(Linux doesn't reset any control bits, but just reports values.), 2=linux(Linux tries to take control and resets mode bits, clear valid/UC bits after reading.)"); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MC Driver for Intel 10nm server processors"); diff --git a/drivers/edac/i3000_edac.c b/drivers/edac/i3000_edac.c new file mode 100644 index 000000000..9065bc438 --- /dev/null +++ b/drivers/edac/i3000_edac.c @@ -0,0 +1,565 @@ +/* + * Intel 3000/3010 Memory Controller kernel module + * Copyright (C) 2007 Akamai Technologies, Inc. + * Shamelessly copied from: + * Intel D82875P Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * + * This file may be distributed under the terms of the + * GNU General Public License. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "i3000_edac" + +#define I3000_RANKS 8 +#define I3000_RANKS_PER_CHANNEL 4 +#define I3000_CHANNELS 2 + +/* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */ + +#define I3000_MCHBAR 0x44 /* MCH Memory Mapped Register BAR */ +#define I3000_MCHBAR_MASK 0xffffc000 +#define I3000_MMR_WINDOW_SIZE 16384 + +#define I3000_EDEAP 0x70 /* Extended DRAM Error Address Pointer (8b) + * + * 7:1 reserved + * 0 bit 32 of address + */ +#define I3000_DEAP 0x58 /* DRAM Error Address Pointer (32b) + * + * 31:7 address + * 6:1 reserved + * 0 Error channel 0/1 + */ +#define I3000_DEAP_GRAIN (1 << 7) + +/* + * Helper functions to decode the DEAP/EDEAP hardware registers. + * + * The type promotion here is deliberate; we're deriving an + * unsigned long pfn and offset from hardware regs which are u8/u32. + */ + +static inline unsigned long deap_pfn(u8 edeap, u32 deap) +{ + deap >>= PAGE_SHIFT; + deap |= (edeap & 1) << (32 - PAGE_SHIFT); + return deap; +} + +static inline unsigned long deap_offset(u32 deap) +{ + return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK; +} + +static inline int deap_channel(u32 deap) +{ + return deap & 1; +} + +#define I3000_DERRSYN 0x5c /* DRAM Error Syndrome (8b) + * + * 7:0 DRAM ECC Syndrome + */ + +#define I3000_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15:12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 Received Refresh Timeout Flag (RRTOF) + * 7:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define I3000_ERRSTS_BITS 0x0b03 /* bits which indicate errors */ +#define I3000_ERRSTS_UE 0x0002 +#define I3000_ERRSTS_CE 0x0001 + +#define I3000_ERRCMD 0xca /* Error Command (16b) + * + * 15:12 reserved + * 11 SERR on MCH Thermal Sensor Event + * (TSESERR) + * 10 reserved + * 9 SERR on LOCK to non-DRAM Memory + * (LCKERR) + * 8 SERR on DRAM Refresh Timeout + * (DRTOERR) + * 7:2 reserved + * 1 SERR Multi-Bit DRAM ECC Error + * (DMERR) + * 0 SERR on Single-Bit ECC Error + * (DSERR) + */ + +/* Intel MMIO register space - device 0 function 0 - MMR space */ + +#define I3000_DRB_SHIFT 25 /* 32MiB grain */ + +#define I3000_C0DRB 0x100 /* Channel 0 DRAM Rank Boundary (8b x 4) + * + * 7:0 Channel 0 DRAM Rank Boundary Address + */ +#define I3000_C1DRB 0x180 /* Channel 1 DRAM Rank Boundary (8b x 4) + * + * 7:0 Channel 1 DRAM Rank Boundary Address + */ + +#define I3000_C0DRA 0x108 /* Channel 0 DRAM Rank Attribute (8b x 2) + * + * 7 reserved + * 6:4 DRAM odd Rank Attribute + * 3 reserved + * 2:0 DRAM even Rank Attribute + * + * Each attribute defines the page + * size of the corresponding rank: + * 000: unpopulated + * 001: reserved + * 010: 4 KB + * 011: 8 KB + * 100: 16 KB + * Others: reserved + */ +#define I3000_C1DRA 0x188 /* Channel 1 DRAM Rank Attribute (8b x 2) */ + +static inline unsigned char odd_rank_attrib(unsigned char dra) +{ + return (dra & 0x70) >> 4; +} + +static inline unsigned char even_rank_attrib(unsigned char dra) +{ + return dra & 0x07; +} + +#define I3000_C0DRC0 0x120 /* DRAM Controller Mode 0 (32b) + * + * 31:30 reserved + * 29 Initialization Complete (IC) + * 28:11 reserved + * 10:8 Refresh Mode Select (RMS) + * 7 reserved + * 6:4 Mode Select (SMS) + * 3:2 reserved + * 1:0 DRAM Type (DT) + */ + +#define I3000_C0DRC1 0x124 /* DRAM Controller Mode 1 (32b) + * + * 31 Enhanced Addressing Enable (ENHADE) + * 30:0 reserved + */ + +enum i3000p_chips { + I3000 = 0, +}; + +struct i3000_dev_info { + const char *ctl_name; +}; + +struct i3000_error_info { + u16 errsts; + u8 derrsyn; + u8 edeap; + u32 deap; + u16 errsts2; +}; + +static const struct i3000_dev_info i3000_devs[] = { + [I3000] = { + .ctl_name = "i3000"}, +}; + +static struct pci_dev *mci_pdev; +static int i3000_registered = 1; +static struct edac_pci_ctl_info *i3000_pci; + +static void i3000_get_error_info(struct mem_ctl_info *mci, + struct i3000_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts); + if (!(info->errsts & I3000_ERRSTS_BITS)) + return; + pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap); + pci_read_config_dword(pdev, I3000_DEAP, &info->deap); + pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn); + pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) { + pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap); + pci_read_config_dword(pdev, I3000_DEAP, &info->deap); + pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn); + } + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, + I3000_ERRSTS_BITS); +} + +static int i3000_process_error_info(struct mem_ctl_info *mci, + struct i3000_error_info *info, + int handle_errors) +{ + int row, multi_chan, channel; + unsigned long pfn, offset; + + multi_chan = mci->csrows[0]->nr_channels - 1; + + if (!(info->errsts & I3000_ERRSTS_BITS)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, + "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + pfn = deap_pfn(info->edeap, info->deap); + offset = deap_offset(info->deap); + channel = deap_channel(info->deap); + + row = edac_mc_find_csrow_by_page(mci, pfn); + + if (info->errsts & I3000_ERRSTS_UE) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + pfn, offset, 0, + row, -1, -1, + "i3000 UE", ""); + else + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + pfn, offset, info->derrsyn, + row, multi_chan ? channel : 0, -1, + "i3000 CE", ""); + + return 1; +} + +static void i3000_check(struct mem_ctl_info *mci) +{ + struct i3000_error_info info; + + i3000_get_error_info(mci, &info); + i3000_process_error_info(mci, &info, 1); +} + +static int i3000_is_interleaved(const unsigned char *c0dra, + const unsigned char *c1dra, + const unsigned char *c0drb, + const unsigned char *c1drb) +{ + int i; + + /* + * If the channels aren't populated identically then + * we're not interleaved. + */ + for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++) + if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) || + even_rank_attrib(c0dra[i]) != + even_rank_attrib(c1dra[i])) + return 0; + + /* + * If the rank boundaries for the two channels are different + * then we're not interleaved. + */ + for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) + if (c0drb[i] != c1drb[i]) + return 0; + + return 1; +} + +static int i3000_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc; + int i, j; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + unsigned long last_cumul_size, nr_pages; + int interleaved, nr_channels; + unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS]; + unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2]; + unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL]; + unsigned long mchbar; + void __iomem *window; + + edac_dbg(0, "MC:\n"); + + pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar); + mchbar &= I3000_MCHBAR_MASK; + window = ioremap(mchbar, I3000_MMR_WINDOW_SIZE); + if (!window) { + printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n", + mchbar); + return -ENODEV; + } + + c0dra[0] = readb(window + I3000_C0DRA + 0); /* ranks 0,1 */ + c0dra[1] = readb(window + I3000_C0DRA + 1); /* ranks 2,3 */ + c1dra[0] = readb(window + I3000_C1DRA + 0); /* ranks 0,1 */ + c1dra[1] = readb(window + I3000_C1DRA + 1); /* ranks 2,3 */ + + for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) { + c0drb[i] = readb(window + I3000_C0DRB + i); + c1drb[i] = readb(window + I3000_C1DRB + i); + } + + iounmap(window); + + /* + * Figure out how many channels we have. + * + * If we have what the datasheet calls "asymmetric channels" + * (essentially the same as what was called "virtual single + * channel mode" in the i82875) then it's a single channel as + * far as EDAC is concerned. + */ + interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb); + nr_channels = interleaved ? 2 : 1; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = I3000_RANKS / nr_channels; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_channels; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (!mci) + return -ENOMEM; + + edac_dbg(3, "MC: init mci\n"); + + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = i3000_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i3000_check; + mci->ctl_page_to_phys = NULL; + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 32MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + * + * If we're in interleaved mode then we're only walking through + * the ranks of controller 0, so we double all the values we see. + */ + for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) { + u8 value; + u32 cumul_size; + struct csrow_info *csrow = mci->csrows[i]; + + value = drb[i]; + cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT); + if (interleaved) + cumul_size <<= 1; + edac_dbg(3, "MC: (%d) cumul_size 0x%x\n", i, cumul_size); + if (cumul_size == last_cumul_size) + continue; + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + + for (j = 0; j < nr_channels; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; + + dimm->nr_pages = nr_pages / nr_channels; + dimm->grain = I3000_DEAP_GRAIN; + dimm->mtype = MEM_DDR2; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_UNKNOWN; + } + } + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS, + I3000_ERRSTS_BITS); + + rc = -ENODEV; + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); + goto fail; + } + + /* allocating generic PCI control info */ + i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i3000_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "MC: success\n"); + return 0; + +fail: + if (mci) + edac_mc_free(mci); + + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int i3000_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i3000_probe1(pdev, ent->driver_data); + if (!mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i3000_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (i3000_pci) + edac_pci_release_generic_ctl(i3000_pci); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id i3000_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I3000}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i3000_pci_tbl); + +static struct pci_driver i3000_driver = { + .name = EDAC_MOD_STR, + .probe = i3000_init_one, + .remove = i3000_remove_one, + .id_table = i3000_pci_tbl, +}; + +static int __init i3000_init(void) +{ + int pci_rc; + + edac_dbg(3, "MC:\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i3000_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + i3000_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_3000_HB, NULL); + if (!mci_pdev) { + edac_dbg(0, "i3000 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl); + if (pci_rc < 0) { + edac_dbg(0, "i3000 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i3000_driver); + +fail0: + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit i3000_exit(void) +{ + edac_dbg(3, "MC:\n"); + + pci_unregister_driver(&i3000_driver); + if (!i3000_registered) { + i3000_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(i3000_init); +module_exit(i3000_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott"); +MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c new file mode 100644 index 000000000..afccdebf5 --- /dev/null +++ b/drivers/edac/i3200_edac.c @@ -0,0 +1,545 @@ +/* + * Intel 3200/3210 Memory Controller kernel module + * Copyright (C) 2008-2009 Akamai Technologies, Inc. + * Portions by Hitoshi Mitake <h.mitake@gmail.com>. + * + * This file may be distributed under the terms of the + * GNU General Public License. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include <linux/io.h> +#include "edac_module.h" + +#include <linux/io-64-nonatomic-lo-hi.h> + +#define EDAC_MOD_STR "i3200_edac" + +#define PCI_DEVICE_ID_INTEL_3200_HB 0x29f0 + +#define I3200_DIMMS 4 +#define I3200_RANKS 8 +#define I3200_RANKS_PER_CHANNEL 4 +#define I3200_CHANNELS 2 + +/* Intel 3200 register addresses - device 0 function 0 - DRAM Controller */ + +#define I3200_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */ +#define I3200_MCHBAR_HIGH 0x4c +#define I3200_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */ +#define I3200_MMR_WINDOW_SIZE 16384 + +#define I3200_TOM 0xa0 /* Top of Memory (16b) + * + * 15:10 reserved + * 9:0 total populated physical memory + */ +#define I3200_TOM_MASK 0x3ff /* bits 9:0 */ +#define I3200_TOM_SHIFT 26 /* 64MiB grain */ + +#define I3200_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15 reserved + * 14 Isochronous TBWRR Run Behind FIFO Full + * (ITCV) + * 13 Isochronous TBWRR Run Behind FIFO Put + * (ITSTV) + * 12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR (GTSE) + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 reserved + * 7 DRAM Throttle Flag (DTF) + * 6:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define I3200_ERRSTS_UE 0x0002 +#define I3200_ERRSTS_CE 0x0001 +#define I3200_ERRSTS_BITS (I3200_ERRSTS_UE | I3200_ERRSTS_CE) + + +/* Intel MMIO register space - device 0 function 0 - MMR space */ + +#define I3200_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4) + * + * 15:10 reserved + * 9:0 Channel 0 DRAM Rank Boundary Address + */ +#define I3200_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */ +#define I3200_DRB_MASK 0x3ff /* bits 9:0 */ +#define I3200_DRB_SHIFT 26 /* 64MiB grain */ + +#define I3200_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b) + * + * 63:48 Error Column Address (ERRCOL) + * 47:32 Error Row Address (ERRROW) + * 31:29 Error Bank Address (ERRBANK) + * 28:27 Error Rank Address (ERRRANK) + * 26:24 reserved + * 23:16 Error Syndrome (ERRSYND) + * 15: 2 reserved + * 1 Multiple Bit Error Status (MERRSTS) + * 0 Correctable Error Status (CERRSTS) + */ +#define I3200_C1ECCERRLOG 0x680 /* Chan 1 ECC Error Log (64b) */ +#define I3200_ECCERRLOG_CE 0x1 +#define I3200_ECCERRLOG_UE 0x2 +#define I3200_ECCERRLOG_RANK_BITS 0x18000000 +#define I3200_ECCERRLOG_RANK_SHIFT 27 +#define I3200_ECCERRLOG_SYNDROME_BITS 0xff0000 +#define I3200_ECCERRLOG_SYNDROME_SHIFT 16 +#define I3200_CAPID0 0xe0 /* P.95 of spec for details */ + +struct i3200_priv { + void __iomem *window; +}; + +static int nr_channels; + +static int how_many_channels(struct pci_dev *pdev) +{ + int n_channels; + + unsigned char capid0_8b; /* 8th byte of CAPID0 */ + + pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b); + + if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */ + edac_dbg(0, "In single channel mode\n"); + n_channels = 1; + } else { + edac_dbg(0, "In dual channel mode\n"); + n_channels = 2; + } + + if (capid0_8b & 0x10) /* check if both channels are filled */ + edac_dbg(0, "2 DIMMS per channel disabled\n"); + else + edac_dbg(0, "2 DIMMS per channel enabled\n"); + + return n_channels; +} + +static unsigned long eccerrlog_syndrome(u64 log) +{ + return (log & I3200_ECCERRLOG_SYNDROME_BITS) >> + I3200_ECCERRLOG_SYNDROME_SHIFT; +} + +static int eccerrlog_row(int channel, u64 log) +{ + u64 rank = ((log & I3200_ECCERRLOG_RANK_BITS) >> + I3200_ECCERRLOG_RANK_SHIFT); + return rank | (channel * I3200_RANKS_PER_CHANNEL); +} + +enum i3200_chips { + I3200 = 0, +}; + +struct i3200_dev_info { + const char *ctl_name; +}; + +struct i3200_error_info { + u16 errsts; + u16 errsts2; + u64 eccerrlog[I3200_CHANNELS]; +}; + +static const struct i3200_dev_info i3200_devs[] = { + [I3200] = { + .ctl_name = "i3200" + }, +}; + +static struct pci_dev *mci_pdev; +static int i3200_registered = 1; + + +static void i3200_clear_error_info(struct mem_ctl_info *mci) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, I3200_ERRSTS, I3200_ERRSTS_BITS, + I3200_ERRSTS_BITS); +} + +static void i3200_get_and_clear_error_info(struct mem_ctl_info *mci, + struct i3200_error_info *info) +{ + struct pci_dev *pdev; + struct i3200_priv *priv = mci->pvt_info; + void __iomem *window = priv->window; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts); + if (!(info->errsts & I3200_ERRSTS_BITS)) + return; + + info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG); + if (nr_channels == 2) + info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG); + + pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) { + info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG); + if (nr_channels == 2) + info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG); + } + + i3200_clear_error_info(mci); +} + +static void i3200_process_error_info(struct mem_ctl_info *mci, + struct i3200_error_info *info) +{ + int channel; + u64 log; + + if (!(info->errsts & I3200_ERRSTS_BITS)) + return; + + if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + for (channel = 0; channel < nr_channels; channel++) { + log = info->eccerrlog[channel]; + if (log & I3200_ECCERRLOG_UE) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + 0, 0, 0, + eccerrlog_row(channel, log), + -1, -1, + "i3000 UE", ""); + } else if (log & I3200_ECCERRLOG_CE) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + 0, 0, eccerrlog_syndrome(log), + eccerrlog_row(channel, log), + -1, -1, + "i3000 CE", ""); + } + } +} + +static void i3200_check(struct mem_ctl_info *mci) +{ + struct i3200_error_info info; + + i3200_get_and_clear_error_info(mci, &info); + i3200_process_error_info(mci, &info); +} + +static void __iomem *i3200_map_mchbar(struct pci_dev *pdev) +{ + union { + u64 mchbar; + struct { + u32 mchbar_low; + u32 mchbar_high; + }; + } u; + void __iomem *window; + + pci_read_config_dword(pdev, I3200_MCHBAR_LOW, &u.mchbar_low); + pci_read_config_dword(pdev, I3200_MCHBAR_HIGH, &u.mchbar_high); + u.mchbar &= I3200_MCHBAR_MASK; + + if (u.mchbar != (resource_size_t)u.mchbar) { + printk(KERN_ERR + "i3200: mmio space beyond accessible range (0x%llx)\n", + (unsigned long long)u.mchbar); + return NULL; + } + + window = ioremap(u.mchbar, I3200_MMR_WINDOW_SIZE); + if (!window) + printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n", + (unsigned long long)u.mchbar); + + return window; +} + + +static void i3200_get_drbs(void __iomem *window, + u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL]) +{ + int i; + + for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) { + drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK; + drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK; + + edac_dbg(0, "drb[0][%d] = %d, drb[1][%d] = %d\n", i, drbs[0][i], i, drbs[1][i]); + } +} + +static bool i3200_is_stacked(struct pci_dev *pdev, + u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL]) +{ + u16 tom; + + pci_read_config_word(pdev, I3200_TOM, &tom); + tom &= I3200_TOM_MASK; + + return drbs[I3200_CHANNELS - 1][I3200_RANKS_PER_CHANNEL - 1] == tom; +} + +static unsigned long drb_to_nr_pages( + u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL], bool stacked, + int channel, int rank) +{ + int n; + + n = drbs[channel][rank]; + if (!n) + return 0; + + if (rank > 0) + n -= drbs[channel][rank - 1]; + if (stacked && (channel == 1) && + drbs[channel][rank] == drbs[channel][I3200_RANKS_PER_CHANNEL - 1]) + n -= drbs[0][I3200_RANKS_PER_CHANNEL - 1]; + + n <<= (I3200_DRB_SHIFT - PAGE_SHIFT); + return n; +} + +static int i3200_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc; + int i, j; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL]; + bool stacked; + void __iomem *window; + struct i3200_priv *priv; + + edac_dbg(0, "MC:\n"); + + window = i3200_map_mchbar(pdev); + if (!window) + return -ENODEV; + + i3200_get_drbs(window, drbs); + nr_channels = how_many_channels(pdev); + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = I3200_DIMMS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_channels; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct i3200_priv)); + if (!mci) + return -ENOMEM; + + edac_dbg(3, "MC: init mci\n"); + + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = i3200_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i3200_check; + mci->ctl_page_to_phys = NULL; + priv = mci->pvt_info; + priv->window = window; + + stacked = i3200_is_stacked(pdev, drbs); + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 64MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + */ + for (i = 0; i < I3200_DIMMS; i++) { + unsigned long nr_pages; + + for (j = 0; j < nr_channels; j++) { + struct dimm_info *dimm = edac_get_dimm(mci, i, j, 0); + + nr_pages = drb_to_nr_pages(drbs, stacked, j, i); + if (nr_pages == 0) + continue; + + edac_dbg(0, "csrow %d, channel %d%s, size = %ld MiB\n", i, j, + stacked ? " (stacked)" : "", PAGES_TO_MiB(nr_pages)); + + dimm->nr_pages = nr_pages; + dimm->grain = nr_pages << PAGE_SHIFT; + dimm->mtype = MEM_DDR2; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_UNKNOWN; + } + } + + i3200_clear_error_info(mci); + + rc = -ENODEV; + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); + goto fail; + } + + /* get this far and it's successful */ + edac_dbg(3, "MC: success\n"); + return 0; + +fail: + iounmap(window); + if (mci) + edac_mc_free(mci); + + return rc; +} + +static int i3200_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i3200_probe1(pdev, ent->driver_data); + if (!mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i3200_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i3200_priv *priv; + + edac_dbg(0, "\n"); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + priv = mci->pvt_info; + iounmap(priv->window); + + edac_mc_free(mci); + + pci_disable_device(pdev); +} + +static const struct pci_device_id i3200_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 3200_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I3200}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i3200_pci_tbl); + +static struct pci_driver i3200_driver = { + .name = EDAC_MOD_STR, + .probe = i3200_init_one, + .remove = i3200_remove_one, + .id_table = i3200_pci_tbl, +}; + +static int __init i3200_init(void) +{ + int pci_rc; + + edac_dbg(3, "MC:\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i3200_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + i3200_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_3200_HB, NULL); + if (!mci_pdev) { + edac_dbg(0, "i3200 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i3200_init_one(mci_pdev, i3200_pci_tbl); + if (pci_rc < 0) { + edac_dbg(0, "i3200 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i3200_driver); + +fail0: + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit i3200_exit(void) +{ + edac_dbg(3, "MC:\n"); + + pci_unregister_driver(&i3200_driver); + if (!i3200_registered) { + i3200_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(i3200_init); +module_exit(i3200_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Akamai Technologies, Inc."); +MODULE_DESCRIPTION("MC support for Intel 3200 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c new file mode 100644 index 000000000..ba46057d4 --- /dev/null +++ b/drivers/edac/i5000_edac.c @@ -0,0 +1,1585 @@ +/* + * Intel 5000(P/V/X) class Memory Controllers kernel module + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Douglas Thompson Linux Networx (http://lnxi.com) + * norsk5@xmission.com + * + * This module is based on the following document: + * + * Intel 5000X Chipset Memory Controller Hub (MCH) - Datasheet + * http://developer.intel.com/design/chipsets/datashts/313070.htm + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include <asm/mmzone.h> + +#include "edac_module.h" + +/* + * Alter this version for the I5000 module when modifications are made + */ +#define I5000_REVISION " Ver: 2.0.12" +#define EDAC_MOD_STR "i5000_edac" + +#define i5000_printk(level, fmt, arg...) \ + edac_printk(level, "i5000", fmt, ##arg) + +#define i5000_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i5000", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_FBD_0 +#define PCI_DEVICE_ID_INTEL_FBD_0 0x25F5 +#endif +#ifndef PCI_DEVICE_ID_INTEL_FBD_1 +#define PCI_DEVICE_ID_INTEL_FBD_1 0x25F6 +#endif + +/* Device 16, + * Function 0: System Address + * Function 1: Memory Branch Map, Control, Errors Register + * Function 2: FSB Error Registers + * + * All 3 functions of Device 16 (0,1,2) share the SAME DID + */ +#define PCI_DEVICE_ID_INTEL_I5000_DEV16 0x25F0 + +/* OFFSETS for Function 0 */ + +/* OFFSETS for Function 1 */ +#define AMBASE 0x48 +#define MAXCH 0x56 +#define MAXDIMMPERCH 0x57 +#define TOLM 0x6C +#define REDMEMB 0x7C +#define RED_ECC_LOCATOR(x) ((x) & 0x3FFFF) +#define REC_ECC_LOCATOR_EVEN(x) ((x) & 0x001FF) +#define REC_ECC_LOCATOR_ODD(x) ((x) & 0x3FE00) +#define MIR0 0x80 +#define MIR1 0x84 +#define MIR2 0x88 +#define AMIR0 0x8C +#define AMIR1 0x90 +#define AMIR2 0x94 + +#define FERR_FAT_FBD 0x98 +#define NERR_FAT_FBD 0x9C +#define EXTRACT_FBDCHAN_INDX(x) (((x)>>28) & 0x3) +#define FERR_FAT_FBDCHAN 0x30000000 +#define FERR_FAT_M3ERR 0x00000004 +#define FERR_FAT_M2ERR 0x00000002 +#define FERR_FAT_M1ERR 0x00000001 +#define FERR_FAT_MASK (FERR_FAT_M1ERR | \ + FERR_FAT_M2ERR | \ + FERR_FAT_M3ERR) + +#define FERR_NF_FBD 0xA0 + +/* Thermal and SPD or BFD errors */ +#define FERR_NF_M28ERR 0x01000000 +#define FERR_NF_M27ERR 0x00800000 +#define FERR_NF_M26ERR 0x00400000 +#define FERR_NF_M25ERR 0x00200000 +#define FERR_NF_M24ERR 0x00100000 +#define FERR_NF_M23ERR 0x00080000 +#define FERR_NF_M22ERR 0x00040000 +#define FERR_NF_M21ERR 0x00020000 + +/* Correctable errors */ +#define FERR_NF_M20ERR 0x00010000 +#define FERR_NF_M19ERR 0x00008000 +#define FERR_NF_M18ERR 0x00004000 +#define FERR_NF_M17ERR 0x00002000 + +/* Non-Retry or redundant Retry errors */ +#define FERR_NF_M16ERR 0x00001000 +#define FERR_NF_M15ERR 0x00000800 +#define FERR_NF_M14ERR 0x00000400 +#define FERR_NF_M13ERR 0x00000200 + +/* Uncorrectable errors */ +#define FERR_NF_M12ERR 0x00000100 +#define FERR_NF_M11ERR 0x00000080 +#define FERR_NF_M10ERR 0x00000040 +#define FERR_NF_M9ERR 0x00000020 +#define FERR_NF_M8ERR 0x00000010 +#define FERR_NF_M7ERR 0x00000008 +#define FERR_NF_M6ERR 0x00000004 +#define FERR_NF_M5ERR 0x00000002 +#define FERR_NF_M4ERR 0x00000001 + +#define FERR_NF_UNCORRECTABLE (FERR_NF_M12ERR | \ + FERR_NF_M11ERR | \ + FERR_NF_M10ERR | \ + FERR_NF_M9ERR | \ + FERR_NF_M8ERR | \ + FERR_NF_M7ERR | \ + FERR_NF_M6ERR | \ + FERR_NF_M5ERR | \ + FERR_NF_M4ERR) +#define FERR_NF_CORRECTABLE (FERR_NF_M20ERR | \ + FERR_NF_M19ERR | \ + FERR_NF_M18ERR | \ + FERR_NF_M17ERR) +#define FERR_NF_DIMM_SPARE (FERR_NF_M27ERR | \ + FERR_NF_M28ERR) +#define FERR_NF_THERMAL (FERR_NF_M26ERR | \ + FERR_NF_M25ERR | \ + FERR_NF_M24ERR | \ + FERR_NF_M23ERR) +#define FERR_NF_SPD_PROTOCOL (FERR_NF_M22ERR) +#define FERR_NF_NORTH_CRC (FERR_NF_M21ERR) +#define FERR_NF_NON_RETRY (FERR_NF_M13ERR | \ + FERR_NF_M14ERR | \ + FERR_NF_M15ERR) + +#define NERR_NF_FBD 0xA4 +#define FERR_NF_MASK (FERR_NF_UNCORRECTABLE | \ + FERR_NF_CORRECTABLE | \ + FERR_NF_DIMM_SPARE | \ + FERR_NF_THERMAL | \ + FERR_NF_SPD_PROTOCOL | \ + FERR_NF_NORTH_CRC | \ + FERR_NF_NON_RETRY) + +#define EMASK_FBD 0xA8 +#define EMASK_FBD_M28ERR 0x08000000 +#define EMASK_FBD_M27ERR 0x04000000 +#define EMASK_FBD_M26ERR 0x02000000 +#define EMASK_FBD_M25ERR 0x01000000 +#define EMASK_FBD_M24ERR 0x00800000 +#define EMASK_FBD_M23ERR 0x00400000 +#define EMASK_FBD_M22ERR 0x00200000 +#define EMASK_FBD_M21ERR 0x00100000 +#define EMASK_FBD_M20ERR 0x00080000 +#define EMASK_FBD_M19ERR 0x00040000 +#define EMASK_FBD_M18ERR 0x00020000 +#define EMASK_FBD_M17ERR 0x00010000 + +#define EMASK_FBD_M15ERR 0x00004000 +#define EMASK_FBD_M14ERR 0x00002000 +#define EMASK_FBD_M13ERR 0x00001000 +#define EMASK_FBD_M12ERR 0x00000800 +#define EMASK_FBD_M11ERR 0x00000400 +#define EMASK_FBD_M10ERR 0x00000200 +#define EMASK_FBD_M9ERR 0x00000100 +#define EMASK_FBD_M8ERR 0x00000080 +#define EMASK_FBD_M7ERR 0x00000040 +#define EMASK_FBD_M6ERR 0x00000020 +#define EMASK_FBD_M5ERR 0x00000010 +#define EMASK_FBD_M4ERR 0x00000008 +#define EMASK_FBD_M3ERR 0x00000004 +#define EMASK_FBD_M2ERR 0x00000002 +#define EMASK_FBD_M1ERR 0x00000001 + +#define ENABLE_EMASK_FBD_FATAL_ERRORS (EMASK_FBD_M1ERR | \ + EMASK_FBD_M2ERR | \ + EMASK_FBD_M3ERR) + +#define ENABLE_EMASK_FBD_UNCORRECTABLE (EMASK_FBD_M4ERR | \ + EMASK_FBD_M5ERR | \ + EMASK_FBD_M6ERR | \ + EMASK_FBD_M7ERR | \ + EMASK_FBD_M8ERR | \ + EMASK_FBD_M9ERR | \ + EMASK_FBD_M10ERR | \ + EMASK_FBD_M11ERR | \ + EMASK_FBD_M12ERR) +#define ENABLE_EMASK_FBD_CORRECTABLE (EMASK_FBD_M17ERR | \ + EMASK_FBD_M18ERR | \ + EMASK_FBD_M19ERR | \ + EMASK_FBD_M20ERR) +#define ENABLE_EMASK_FBD_DIMM_SPARE (EMASK_FBD_M27ERR | \ + EMASK_FBD_M28ERR) +#define ENABLE_EMASK_FBD_THERMALS (EMASK_FBD_M26ERR | \ + EMASK_FBD_M25ERR | \ + EMASK_FBD_M24ERR | \ + EMASK_FBD_M23ERR) +#define ENABLE_EMASK_FBD_SPD_PROTOCOL (EMASK_FBD_M22ERR) +#define ENABLE_EMASK_FBD_NORTH_CRC (EMASK_FBD_M21ERR) +#define ENABLE_EMASK_FBD_NON_RETRY (EMASK_FBD_M15ERR | \ + EMASK_FBD_M14ERR | \ + EMASK_FBD_M13ERR) + +#define ENABLE_EMASK_ALL (ENABLE_EMASK_FBD_NON_RETRY | \ + ENABLE_EMASK_FBD_NORTH_CRC | \ + ENABLE_EMASK_FBD_SPD_PROTOCOL | \ + ENABLE_EMASK_FBD_THERMALS | \ + ENABLE_EMASK_FBD_DIMM_SPARE | \ + ENABLE_EMASK_FBD_FATAL_ERRORS | \ + ENABLE_EMASK_FBD_CORRECTABLE | \ + ENABLE_EMASK_FBD_UNCORRECTABLE) + +#define ERR0_FBD 0xAC +#define ERR1_FBD 0xB0 +#define ERR2_FBD 0xB4 +#define MCERR_FBD 0xB8 +#define NRECMEMA 0xBE +#define NREC_BANK(x) (((x)>>12) & 0x7) +#define NREC_RDWR(x) (((x)>>11) & 1) +#define NREC_RANK(x) (((x)>>8) & 0x7) +#define NRECMEMB 0xC0 +#define NREC_CAS(x) (((x)>>16) & 0xFFF) +#define NREC_RAS(x) ((x) & 0x7FFF) +#define NRECFGLOG 0xC4 +#define NREEECFBDA 0xC8 +#define NREEECFBDB 0xCC +#define NREEECFBDC 0xD0 +#define NREEECFBDD 0xD4 +#define NREEECFBDE 0xD8 +#define REDMEMA 0xDC +#define RECMEMA 0xE2 +#define REC_BANK(x) (((x)>>12) & 0x7) +#define REC_RDWR(x) (((x)>>11) & 1) +#define REC_RANK(x) (((x)>>8) & 0x7) +#define RECMEMB 0xE4 +#define REC_CAS(x) (((x)>>16) & 0xFFFFFF) +#define REC_RAS(x) ((x) & 0x7FFF) +#define RECFGLOG 0xE8 +#define RECFBDA 0xEC +#define RECFBDB 0xF0 +#define RECFBDC 0xF4 +#define RECFBDD 0xF8 +#define RECFBDE 0xFC + +/* OFFSETS for Function 2 */ + +/* + * Device 21, + * Function 0: Memory Map Branch 0 + * + * Device 22, + * Function 0: Memory Map Branch 1 + */ +#define PCI_DEVICE_ID_I5000_BRANCH_0 0x25F5 +#define PCI_DEVICE_ID_I5000_BRANCH_1 0x25F6 + +#define AMB_PRESENT_0 0x64 +#define AMB_PRESENT_1 0x66 +#define MTR0 0x80 +#define MTR1 0x84 +#define MTR2 0x88 +#define MTR3 0x8C + +#define NUM_MTRS 4 +#define CHANNELS_PER_BRANCH 2 +#define MAX_BRANCHES 2 + +/* Defines to extract the various fields from the + * MTRx - Memory Technology Registers + */ +#define MTR_DIMMS_PRESENT(mtr) ((mtr) & (0x1 << 8)) +#define MTR_DRAM_WIDTH(mtr) ((((mtr) >> 6) & 0x1) ? 8 : 4) +#define MTR_DRAM_BANKS(mtr) ((((mtr) >> 5) & 0x1) ? 8 : 4) +#define MTR_DRAM_BANKS_ADDR_BITS(mtr) ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2) +#define MTR_DIMM_RANK(mtr) (((mtr) >> 4) & 0x1) +#define MTR_DIMM_RANK_ADDR_BITS(mtr) (MTR_DIMM_RANK(mtr) ? 2 : 1) +#define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3) +#define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13) +#define MTR_DIMM_COLS(mtr) ((mtr) & 0x3) +#define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10) + +/* enables the report of miscellaneous messages as CE errors - default off */ +static int misc_messages; + +/* Enumeration of supported devices */ +enum i5000_chips { + I5000P = 0, + I5000V = 1, /* future */ + I5000X = 2 /* future */ +}; + +/* Device name and register DID (Device ID) */ +struct i5000_dev_info { + const char *ctl_name; /* name for this device */ + u16 fsb_mapping_errors; /* DID for the branchmap,control */ +}; + +/* Table of devices attributes supported by this driver */ +static const struct i5000_dev_info i5000_devs[] = { + [I5000P] = { + .ctl_name = "I5000", + .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I5000_DEV16, + }, +}; + +struct i5000_dimm_info { + int megabytes; /* size, 0 means not present */ + int dual_rank; +}; + +#define MAX_CHANNELS 6 /* max possible channels */ +#define MAX_CSROWS (8*2) /* max possible csrows per channel */ + +/* driver private data structure */ +struct i5000_pvt { + struct pci_dev *system_address; /* 16.0 */ + struct pci_dev *branchmap_werrors; /* 16.1 */ + struct pci_dev *fsb_error_regs; /* 16.2 */ + struct pci_dev *branch_0; /* 21.0 */ + struct pci_dev *branch_1; /* 22.0 */ + + u16 tolm; /* top of low memory */ + union { + u64 ambase; /* AMB BAR */ + struct { + u32 ambase_bottom; + u32 ambase_top; + } u __packed; + }; + + u16 mir0, mir1, mir2; + + u16 b0_mtr[NUM_MTRS]; /* Memory Technlogy Reg */ + u16 b0_ambpresent0; /* Branch 0, Channel 0 */ + u16 b0_ambpresent1; /* Brnach 0, Channel 1 */ + + u16 b1_mtr[NUM_MTRS]; /* Memory Technlogy Reg */ + u16 b1_ambpresent0; /* Branch 1, Channel 8 */ + u16 b1_ambpresent1; /* Branch 1, Channel 1 */ + + /* DIMM information matrix, allocating architecture maximums */ + struct i5000_dimm_info dimm_info[MAX_CSROWS][MAX_CHANNELS]; + + /* Actual values for this controller */ + int maxch; /* Max channels */ + int maxdimmperch; /* Max DIMMs per channel */ +}; + +/* I5000 MCH error information retrieved from Hardware */ +struct i5000_error_info { + + /* These registers are always read from the MC */ + u32 ferr_fat_fbd; /* First Errors Fatal */ + u32 nerr_fat_fbd; /* Next Errors Fatal */ + u32 ferr_nf_fbd; /* First Errors Non-Fatal */ + u32 nerr_nf_fbd; /* Next Errors Non-Fatal */ + + /* These registers are input ONLY if there was a Recoverable Error */ + u32 redmemb; /* Recoverable Mem Data Error log B */ + u16 recmema; /* Recoverable Mem Error log A */ + u32 recmemb; /* Recoverable Mem Error log B */ + + /* These registers are input ONLY if there was a + * Non-Recoverable Error */ + u16 nrecmema; /* Non-Recoverable Mem log A */ + u32 nrecmemb; /* Non-Recoverable Mem log B */ + +}; + +static struct edac_pci_ctl_info *i5000_pci; + +/* + * i5000_get_error_info Retrieve the hardware error information from + * the hardware and cache it in the 'info' + * structure + */ +static void i5000_get_error_info(struct mem_ctl_info *mci, + struct i5000_error_info *info) +{ + struct i5000_pvt *pvt; + u32 value; + + pvt = mci->pvt_info; + + /* read in the 1st FATAL error register */ + pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value); + + /* Mask only the bits that the doc says are valid + */ + value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK); + + /* If there is an error, then read in the */ + /* NEXT FATAL error register and the Memory Error Log Register A */ + if (value & FERR_FAT_MASK) { + info->ferr_fat_fbd = value; + + /* harvest the various error data we need */ + pci_read_config_dword(pvt->branchmap_werrors, + NERR_FAT_FBD, &info->nerr_fat_fbd); + pci_read_config_word(pvt->branchmap_werrors, + NRECMEMA, &info->nrecmema); + pci_read_config_dword(pvt->branchmap_werrors, + NRECMEMB, &info->nrecmemb); + + /* Clear the error bits, by writing them back */ + pci_write_config_dword(pvt->branchmap_werrors, + FERR_FAT_FBD, value); + } else { + info->ferr_fat_fbd = 0; + info->nerr_fat_fbd = 0; + info->nrecmema = 0; + info->nrecmemb = 0; + } + + /* read in the 1st NON-FATAL error register */ + pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value); + + /* If there is an error, then read in the 1st NON-FATAL error + * register as well */ + if (value & FERR_NF_MASK) { + info->ferr_nf_fbd = value; + + /* harvest the various error data we need */ + pci_read_config_dword(pvt->branchmap_werrors, + NERR_NF_FBD, &info->nerr_nf_fbd); + pci_read_config_word(pvt->branchmap_werrors, + RECMEMA, &info->recmema); + pci_read_config_dword(pvt->branchmap_werrors, + RECMEMB, &info->recmemb); + pci_read_config_dword(pvt->branchmap_werrors, + REDMEMB, &info->redmemb); + + /* Clear the error bits, by writing them back */ + pci_write_config_dword(pvt->branchmap_werrors, + FERR_NF_FBD, value); + } else { + info->ferr_nf_fbd = 0; + info->nerr_nf_fbd = 0; + info->recmema = 0; + info->recmemb = 0; + info->redmemb = 0; + } +} + +/* + * i5000_process_fatal_error_info(struct mem_ctl_info *mci, + * struct i5000_error_info *info, + * int handle_errors); + * + * handle the Intel FATAL errors, if any + */ +static void i5000_process_fatal_error_info(struct mem_ctl_info *mci, + struct i5000_error_info *info, + int handle_errors) +{ + char msg[EDAC_MC_LABEL_LEN + 1 + 160]; + char *specific = NULL; + u32 allErrors; + int channel; + int bank; + int rank; + int rdwr; + int ras, cas; + + /* mask off the Error bits that are possible */ + allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK); + if (!allErrors) + return; /* if no error, return now */ + + channel = EXTRACT_FBDCHAN_INDX(info->ferr_fat_fbd); + + /* Use the NON-Recoverable macros to extract data */ + bank = NREC_BANK(info->nrecmema); + rank = NREC_RANK(info->nrecmema); + rdwr = NREC_RDWR(info->nrecmema); + ras = NREC_RAS(info->nrecmemb); + cas = NREC_CAS(info->nrecmemb); + + edac_dbg(0, "\t\tCSROW= %d Channel= %d (DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", + rank, channel, bank, + rdwr ? "Write" : "Read", ras, cas); + + /* Only 1 bit will be on */ + switch (allErrors) { + case FERR_FAT_M1ERR: + specific = "Alert on non-redundant retry or fast " + "reset timeout"; + break; + case FERR_FAT_M2ERR: + specific = "Northbound CRC error on non-redundant " + "retry"; + break; + case FERR_FAT_M3ERR: + { + static int done; + + /* + * This error is generated to inform that the intelligent + * throttling is disabled and the temperature passed the + * specified middle point. Since this is something the BIOS + * should take care of, we'll warn only once to avoid + * worthlessly flooding the log. + */ + if (done) + return; + done++; + + specific = ">Tmid Thermal event with intelligent " + "throttling disabled"; + } + break; + } + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Bank=%d RAS=%d CAS=%d FATAL Err=0x%x (%s)", + bank, ras, cas, allErrors, specific); + + /* Call the helper to output message */ + edac_mc_handle_error(HW_EVENT_ERR_FATAL, mci, 1, 0, 0, 0, + channel >> 1, channel & 1, rank, + rdwr ? "Write error" : "Read error", + msg); +} + +/* + * i5000_process_fatal_error_info(struct mem_ctl_info *mci, + * struct i5000_error_info *info, + * int handle_errors); + * + * handle the Intel NON-FATAL errors, if any + */ +static void i5000_process_nonfatal_error_info(struct mem_ctl_info *mci, + struct i5000_error_info *info, + int handle_errors) +{ + char msg[EDAC_MC_LABEL_LEN + 1 + 170]; + char *specific = NULL; + u32 allErrors; + u32 ue_errors; + u32 ce_errors; + u32 misc_errors; + int branch; + int channel; + int bank; + int rank; + int rdwr; + int ras, cas; + + /* mask off the Error bits that are possible */ + allErrors = (info->ferr_nf_fbd & FERR_NF_MASK); + if (!allErrors) + return; /* if no error, return now */ + + /* ONLY ONE of the possible error bits will be set, as per the docs */ + ue_errors = allErrors & FERR_NF_UNCORRECTABLE; + if (ue_errors) { + edac_dbg(0, "\tUncorrected bits= 0x%x\n", ue_errors); + + branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); + + /* + * According with i5000 datasheet, bit 28 has no significance + * for errors M4Err-M12Err and M17Err-M21Err, on FERR_NF_FBD + */ + channel = branch & 2; + + bank = NREC_BANK(info->nrecmema); + rank = NREC_RANK(info->nrecmema); + rdwr = NREC_RDWR(info->nrecmema); + ras = NREC_RAS(info->nrecmemb); + cas = NREC_CAS(info->nrecmemb); + + edac_dbg(0, "\t\tCSROW= %d Channels= %d,%d (Branch= %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", + rank, channel, channel + 1, branch >> 1, bank, + rdwr ? "Write" : "Read", ras, cas); + + switch (ue_errors) { + case FERR_NF_M12ERR: + specific = "Non-Aliased Uncorrectable Patrol Data ECC"; + break; + case FERR_NF_M11ERR: + specific = "Non-Aliased Uncorrectable Spare-Copy " + "Data ECC"; + break; + case FERR_NF_M10ERR: + specific = "Non-Aliased Uncorrectable Mirrored Demand " + "Data ECC"; + break; + case FERR_NF_M9ERR: + specific = "Non-Aliased Uncorrectable Non-Mirrored " + "Demand Data ECC"; + break; + case FERR_NF_M8ERR: + specific = "Aliased Uncorrectable Patrol Data ECC"; + break; + case FERR_NF_M7ERR: + specific = "Aliased Uncorrectable Spare-Copy Data ECC"; + break; + case FERR_NF_M6ERR: + specific = "Aliased Uncorrectable Mirrored Demand " + "Data ECC"; + break; + case FERR_NF_M5ERR: + specific = "Aliased Uncorrectable Non-Mirrored Demand " + "Data ECC"; + break; + case FERR_NF_M4ERR: + specific = "Uncorrectable Data ECC on Replay"; + break; + } + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Rank=%d Bank=%d RAS=%d CAS=%d, UE Err=0x%x (%s)", + rank, bank, ras, cas, ue_errors, specific); + + /* Call the helper to output message */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + channel >> 1, -1, rank, + rdwr ? "Write error" : "Read error", + msg); + } + + /* Check correctable errors */ + ce_errors = allErrors & FERR_NF_CORRECTABLE; + if (ce_errors) { + edac_dbg(0, "\tCorrected bits= 0x%x\n", ce_errors); + + branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); + + channel = 0; + if (REC_ECC_LOCATOR_ODD(info->redmemb)) + channel = 1; + + /* Convert channel to be based from zero, instead of + * from branch base of 0 */ + channel += branch; + + bank = REC_BANK(info->recmema); + rank = REC_RANK(info->recmema); + rdwr = REC_RDWR(info->recmema); + ras = REC_RAS(info->recmemb); + cas = REC_CAS(info->recmemb); + + edac_dbg(0, "\t\tCSROW= %d Channel= %d (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", + rank, channel, branch >> 1, bank, + rdwr ? "Write" : "Read", ras, cas); + + switch (ce_errors) { + case FERR_NF_M17ERR: + specific = "Correctable Non-Mirrored Demand Data ECC"; + break; + case FERR_NF_M18ERR: + specific = "Correctable Mirrored Demand Data ECC"; + break; + case FERR_NF_M19ERR: + specific = "Correctable Spare-Copy Data ECC"; + break; + case FERR_NF_M20ERR: + specific = "Correctable Patrol Data ECC"; + break; + } + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Rank=%d Bank=%d RDWR=%s RAS=%d " + "CAS=%d, CE Err=0x%x (%s))", branch >> 1, bank, + rdwr ? "Write" : "Read", ras, cas, ce_errors, + specific); + + /* Call the helper to output message */ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, + channel >> 1, channel % 2, rank, + rdwr ? "Write error" : "Read error", + msg); + } + + if (!misc_messages) + return; + + misc_errors = allErrors & (FERR_NF_NON_RETRY | FERR_NF_NORTH_CRC | + FERR_NF_SPD_PROTOCOL | FERR_NF_DIMM_SPARE); + if (misc_errors) { + switch (misc_errors) { + case FERR_NF_M13ERR: + specific = "Non-Retry or Redundant Retry FBD Memory " + "Alert or Redundant Fast Reset Timeout"; + break; + case FERR_NF_M14ERR: + specific = "Non-Retry or Redundant Retry FBD " + "Configuration Alert"; + break; + case FERR_NF_M15ERR: + specific = "Non-Retry or Redundant Retry FBD " + "Northbound CRC error on read data"; + break; + case FERR_NF_M21ERR: + specific = "FBD Northbound CRC error on " + "FBD Sync Status"; + break; + case FERR_NF_M22ERR: + specific = "SPD protocol error"; + break; + case FERR_NF_M27ERR: + specific = "DIMM-spare copy started"; + break; + case FERR_NF_M28ERR: + specific = "DIMM-spare copy completed"; + break; + } + branch = EXTRACT_FBDCHAN_INDX(info->ferr_nf_fbd); + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Err=%#x (%s)", misc_errors, specific); + + /* Call the helper to output message */ + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, + branch >> 1, -1, -1, + "Misc error", msg); + } +} + +/* + * i5000_process_error_info Process the error info that is + * in the 'info' structure, previously retrieved from hardware + */ +static void i5000_process_error_info(struct mem_ctl_info *mci, + struct i5000_error_info *info, + int handle_errors) +{ + /* First handle any fatal errors that occurred */ + i5000_process_fatal_error_info(mci, info, handle_errors); + + /* now handle any non-fatal errors that occurred */ + i5000_process_nonfatal_error_info(mci, info, handle_errors); +} + +/* + * i5000_clear_error Retrieve any error from the hardware + * but do NOT process that error. + * Used for 'clearing' out of previous errors + * Called by the Core module. + */ +static void i5000_clear_error(struct mem_ctl_info *mci) +{ + struct i5000_error_info info; + + i5000_get_error_info(mci, &info); +} + +/* + * i5000_check_error Retrieve and process errors reported by the + * hardware. Called by the Core module. + */ +static void i5000_check_error(struct mem_ctl_info *mci) +{ + struct i5000_error_info info; + + i5000_get_error_info(mci, &info); + i5000_process_error_info(mci, &info, 1); +} + +/* + * i5000_get_devices Find and perform 'get' operation on the MCH's + * device/functions we want to reference for this driver + * + * Need to 'get' device 16 func 1 and func 2 + */ +static int i5000_get_devices(struct mem_ctl_info *mci, int dev_idx) +{ + //const struct i5000_dev_info *i5000_dev = &i5000_devs[dev_idx]; + struct i5000_pvt *pvt; + struct pci_dev *pdev; + + pvt = mci->pvt_info; + + /* Attempt to 'get' the MCH register we want */ + pdev = NULL; + while (1) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev); + + /* End of list, leave */ + if (pdev == NULL) { + i5000_printk(KERN_ERR, + "'system address,Process Bus' " + "device not found:" + "vendor 0x%x device 0x%x FUNC 1 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I5000_DEV16); + + return 1; + } + + /* Scan for device 16 func 1 */ + if (PCI_FUNC(pdev->devfn) == 1) + break; + } + + pvt->branchmap_werrors = pdev; + + /* Attempt to 'get' the MCH register we want */ + pdev = NULL; + while (1) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I5000_DEV16, pdev); + + if (pdev == NULL) { + i5000_printk(KERN_ERR, + "MC: 'branchmap,control,errors' " + "device not found:" + "vendor 0x%x device 0x%x Func 2 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I5000_DEV16); + + pci_dev_put(pvt->branchmap_werrors); + return 1; + } + + /* Scan for device 16 func 1 */ + if (PCI_FUNC(pdev->devfn) == 2) + break; + } + + pvt->fsb_error_regs = pdev; + + edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s %x:%x\n", + pci_name(pvt->system_address), + pvt->system_address->vendor, pvt->system_address->device); + edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->branchmap_werrors), + pvt->branchmap_werrors->vendor, + pvt->branchmap_werrors->device); + edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->fsb_error_regs), + pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device); + + pdev = NULL; + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_I5000_BRANCH_0, pdev); + + if (pdev == NULL) { + i5000_printk(KERN_ERR, + "MC: 'BRANCH 0' device not found:" + "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_I5000_BRANCH_0); + + pci_dev_put(pvt->branchmap_werrors); + pci_dev_put(pvt->fsb_error_regs); + return 1; + } + + pvt->branch_0 = pdev; + + /* If this device claims to have more than 2 channels then + * fetch Branch 1's information + */ + if (pvt->maxch >= CHANNELS_PER_BRANCH) { + pdev = NULL; + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_I5000_BRANCH_1, pdev); + + if (pdev == NULL) { + i5000_printk(KERN_ERR, + "MC: 'BRANCH 1' device not found:" + "vendor 0x%x device 0x%x Func 0 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_I5000_BRANCH_1); + + pci_dev_put(pvt->branchmap_werrors); + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branch_0); + return 1; + } + + pvt->branch_1 = pdev; + } + + return 0; +} + +/* + * i5000_put_devices 'put' all the devices that we have + * reserved via 'get' + */ +static void i5000_put_devices(struct mem_ctl_info *mci) +{ + struct i5000_pvt *pvt; + + pvt = mci->pvt_info; + + pci_dev_put(pvt->branchmap_werrors); /* FUNC 1 */ + pci_dev_put(pvt->fsb_error_regs); /* FUNC 2 */ + pci_dev_put(pvt->branch_0); /* DEV 21 */ + + /* Only if more than 2 channels do we release the second branch */ + if (pvt->maxch >= CHANNELS_PER_BRANCH) + pci_dev_put(pvt->branch_1); /* DEV 22 */ +} + +/* + * determine_amb_resent + * + * the information is contained in NUM_MTRS different registers + * determineing which of the NUM_MTRS requires knowing + * which channel is in question + * + * 2 branches, each with 2 channels + * b0_ambpresent0 for channel '0' + * b0_ambpresent1 for channel '1' + * b1_ambpresent0 for channel '2' + * b1_ambpresent1 for channel '3' + */ +static int determine_amb_present_reg(struct i5000_pvt *pvt, int channel) +{ + int amb_present; + + if (channel < CHANNELS_PER_BRANCH) { + if (channel & 0x1) + amb_present = pvt->b0_ambpresent1; + else + amb_present = pvt->b0_ambpresent0; + } else { + if (channel & 0x1) + amb_present = pvt->b1_ambpresent1; + else + amb_present = pvt->b1_ambpresent0; + } + + return amb_present; +} + +/* + * determine_mtr(pvt, csrow, channel) + * + * return the proper MTR register as determine by the csrow and channel desired + */ +static int determine_mtr(struct i5000_pvt *pvt, int slot, int channel) +{ + int mtr; + + if (channel < CHANNELS_PER_BRANCH) + mtr = pvt->b0_mtr[slot]; + else + mtr = pvt->b1_mtr[slot]; + + return mtr; +} + +/* + */ +static void decode_mtr(int slot_row, u16 mtr) +{ + int ans; + + ans = MTR_DIMMS_PRESENT(mtr); + + edac_dbg(2, "\tMTR%d=0x%x: DIMMs are %sPresent\n", + slot_row, mtr, ans ? "" : "NOT "); + if (!ans) + return; + + edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr)); + edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr)); + edac_dbg(2, "\t\tNUMRANK: %s\n", + MTR_DIMM_RANK(mtr) ? "double" : "single"); + edac_dbg(2, "\t\tNUMROW: %s\n", + MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" : + MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" : + MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" : + "reserved"); + edac_dbg(2, "\t\tNUMCOL: %s\n", + MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" : + MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" : + MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" : + "reserved"); +} + +static void handle_channel(struct i5000_pvt *pvt, int slot, int channel, + struct i5000_dimm_info *dinfo) +{ + int mtr; + int amb_present_reg; + int addrBits; + + mtr = determine_mtr(pvt, slot, channel); + if (MTR_DIMMS_PRESENT(mtr)) { + amb_present_reg = determine_amb_present_reg(pvt, channel); + + /* Determine if there is a DIMM present in this DIMM slot */ + if (amb_present_reg) { + dinfo->dual_rank = MTR_DIMM_RANK(mtr); + + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); + /* Add the number of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + + /* Dual-rank memories have twice the size */ + if (dinfo->dual_rank) + addrBits++; + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; + } + } +} + +/* + * calculate_dimm_size + * + * also will output a DIMM matrix map, if debug is enabled, for viewing + * how the DIMMs are populated + */ +static void calculate_dimm_size(struct i5000_pvt *pvt) +{ + struct i5000_dimm_info *dinfo; + int slot, channel, branch; + char *p, *mem_buffer; + int space, n; + + /* ================= Generate some debug output ================= */ + space = PAGE_SIZE; + mem_buffer = p = kmalloc(space, GFP_KERNEL); + if (p == NULL) { + i5000_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n", + __FILE__, __func__); + return; + } + + /* Scan all the actual slots + * and calculate the information for each DIMM + * Start with the highest slot first, to display it first + * and work toward the 0th slot + */ + for (slot = pvt->maxdimmperch - 1; slot >= 0; slot--) { + + /* on an odd slot, first output a 'boundary' marker, + * then reset the message buffer */ + if (slot & 0x1) { + n = snprintf(p, space, "--------------------------" + "--------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + } + n = snprintf(p, space, "slot %2d ", slot); + p += n; + space -= n; + + for (channel = 0; channel < pvt->maxch; channel++) { + dinfo = &pvt->dimm_info[slot][channel]; + handle_channel(pvt, slot, channel, dinfo); + if (dinfo->megabytes) + n = snprintf(p, space, "%4d MB %dR| ", + dinfo->megabytes, dinfo->dual_rank + 1); + else + n = snprintf(p, space, "%4d MB | ", 0); + p += n; + space -= n; + } + p += n; + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + } + + /* Output the last bottom 'boundary' marker */ + n = snprintf(p, space, "--------------------------" + "--------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + + /* now output the 'channel' labels */ + n = snprintf(p, space, " "); + p += n; + space -= n; + for (channel = 0; channel < pvt->maxch; channel++) { + n = snprintf(p, space, "channel %d | ", channel); + p += n; + space -= n; + } + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + + n = snprintf(p, space, " "); + p += n; + for (branch = 0; branch < MAX_BRANCHES; branch++) { + n = snprintf(p, space, " branch %d | ", branch); + p += n; + space -= n; + } + + /* output the last message and free buffer */ + edac_dbg(2, "%s\n", mem_buffer); + kfree(mem_buffer); +} + +/* + * i5000_get_mc_regs read in the necessary registers and + * cache locally + * + * Fills in the private data members + */ +static void i5000_get_mc_regs(struct mem_ctl_info *mci) +{ + struct i5000_pvt *pvt; + u32 actual_tolm; + u16 limit; + int slot_row; + int way0, way1; + + pvt = mci->pvt_info; + + pci_read_config_dword(pvt->system_address, AMBASE, + &pvt->u.ambase_bottom); + pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32), + &pvt->u.ambase_top); + + edac_dbg(2, "AMBASE= 0x%lx MAXCH= %d MAX-DIMM-Per-CH= %d\n", + (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch); + + /* Get the Branch Map regs */ + pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm); + pvt->tolm >>= 12; + edac_dbg(2, "TOLM (number of 256M regions) =%u (0x%x)\n", + pvt->tolm, pvt->tolm); + + actual_tolm = pvt->tolm << 28; + edac_dbg(2, "Actual TOLM byte addr=%u (0x%x)\n", + actual_tolm, actual_tolm); + + pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0); + pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1); + pci_read_config_word(pvt->branchmap_werrors, MIR2, &pvt->mir2); + + /* Get the MIR[0-2] regs */ + limit = (pvt->mir0 >> 4) & 0x0FFF; + way0 = pvt->mir0 & 0x1; + way1 = pvt->mir0 & 0x2; + edac_dbg(2, "MIR0: limit= 0x%x WAY1= %u WAY0= %x\n", + limit, way1, way0); + limit = (pvt->mir1 >> 4) & 0x0FFF; + way0 = pvt->mir1 & 0x1; + way1 = pvt->mir1 & 0x2; + edac_dbg(2, "MIR1: limit= 0x%x WAY1= %u WAY0= %x\n", + limit, way1, way0); + limit = (pvt->mir2 >> 4) & 0x0FFF; + way0 = pvt->mir2 & 0x1; + way1 = pvt->mir2 & 0x2; + edac_dbg(2, "MIR2: limit= 0x%x WAY1= %u WAY0= %x\n", + limit, way1, way0); + + /* Get the MTR[0-3] regs */ + for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { + int where = MTR0 + (slot_row * sizeof(u32)); + + pci_read_config_word(pvt->branch_0, where, + &pvt->b0_mtr[slot_row]); + + edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n", + slot_row, where, pvt->b0_mtr[slot_row]); + + if (pvt->maxch >= CHANNELS_PER_BRANCH) { + pci_read_config_word(pvt->branch_1, where, + &pvt->b1_mtr[slot_row]); + edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n", + slot_row, where, pvt->b1_mtr[slot_row]); + } else { + pvt->b1_mtr[slot_row] = 0; + } + } + + /* Read and dump branch 0's MTRs */ + edac_dbg(2, "Memory Technology Registers:\n"); + edac_dbg(2, " Branch 0:\n"); + for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { + decode_mtr(slot_row, pvt->b0_mtr[slot_row]); + } + pci_read_config_word(pvt->branch_0, AMB_PRESENT_0, + &pvt->b0_ambpresent0); + edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0); + pci_read_config_word(pvt->branch_0, AMB_PRESENT_1, + &pvt->b0_ambpresent1); + edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1); + + /* Only if we have 2 branchs (4 channels) */ + if (pvt->maxch < CHANNELS_PER_BRANCH) { + pvt->b1_ambpresent0 = 0; + pvt->b1_ambpresent1 = 0; + } else { + /* Read and dump branch 1's MTRs */ + edac_dbg(2, " Branch 1:\n"); + for (slot_row = 0; slot_row < NUM_MTRS; slot_row++) { + decode_mtr(slot_row, pvt->b1_mtr[slot_row]); + } + pci_read_config_word(pvt->branch_1, AMB_PRESENT_0, + &pvt->b1_ambpresent0); + edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n", + pvt->b1_ambpresent0); + pci_read_config_word(pvt->branch_1, AMB_PRESENT_1, + &pvt->b1_ambpresent1); + edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n", + pvt->b1_ambpresent1); + } + + /* Go and determine the size of each DIMM and place in an + * orderly matrix */ + calculate_dimm_size(pvt); +} + +/* + * i5000_init_csrows Initialize the 'csrows' table within + * the mci control structure with the + * addressing of memory. + * + * return: + * 0 success + * 1 no actual memory found on this MC + */ +static int i5000_init_csrows(struct mem_ctl_info *mci) +{ + struct i5000_pvt *pvt; + struct dimm_info *dimm; + int empty; + int max_csrows; + int mtr; + int csrow_megs; + int channel; + int slot; + + pvt = mci->pvt_info; + max_csrows = pvt->maxdimmperch * 2; + + empty = 1; /* Assume NO memory */ + + /* + * FIXME: The memory layout used to map slot/channel into the + * real memory architecture is weird: branch+slot are "csrows" + * and channel is channel. That required an extra array (dimm_info) + * to map the dimms. A good cleanup would be to remove this array, + * and do a loop here with branch, channel, slot + */ + for (slot = 0; slot < max_csrows; slot++) { + for (channel = 0; channel < pvt->maxch; channel++) { + + mtr = determine_mtr(pvt, slot, channel); + + if (!MTR_DIMMS_PRESENT(mtr)) + continue; + + dimm = edac_get_dimm(mci, channel / MAX_BRANCHES, + channel % MAX_BRANCHES, slot); + + csrow_megs = pvt->dimm_info[slot][channel].megabytes; + dimm->grain = 8; + + /* Assume DDR2 for now */ + dimm->mtype = MEM_FB_DDR2; + + /* ask what device type on this row */ + if (MTR_DRAM_WIDTH(mtr) == 8) + dimm->dtype = DEV_X8; + else + dimm->dtype = DEV_X4; + + dimm->edac_mode = EDAC_S8ECD8ED; + dimm->nr_pages = csrow_megs << 8; + } + + empty = 0; + } + + return empty; +} + +/* + * i5000_enable_error_reporting + * Turn on the memory reporting features of the hardware + */ +static void i5000_enable_error_reporting(struct mem_ctl_info *mci) +{ + struct i5000_pvt *pvt; + u32 fbd_error_mask; + + pvt = mci->pvt_info; + + /* Read the FBD Error Mask Register */ + pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD, + &fbd_error_mask); + + /* Enable with a '0' */ + fbd_error_mask &= ~(ENABLE_EMASK_ALL); + + pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD, + fbd_error_mask); +} + +/* + * i5000_get_dimm_and_channel_counts(pdev, &nr_csrows, &num_channels) + * + * ask the device how many channels are present and how many CSROWS + * as well + */ +static void i5000_get_dimm_and_channel_counts(struct pci_dev *pdev, + int *num_dimms_per_channel, + int *num_channels) +{ + u8 value; + + /* Need to retrieve just how many channels and dimms per channel are + * supported on this memory controller + */ + pci_read_config_byte(pdev, MAXDIMMPERCH, &value); + *num_dimms_per_channel = (int)value; + + pci_read_config_byte(pdev, MAXCH, &value); + *num_channels = (int)value; +} + +/* + * i5000_probe1 Probe for ONE instance of device to see if it is + * present. + * return: + * 0 for FOUND a device + * < 0 for error code + */ +static int i5000_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[3]; + struct i5000_pvt *pvt; + int num_channels; + int num_dimms_per_channel; + + edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* We only are looking for func 0 of the set */ + if (PCI_FUNC(pdev->devfn) != 0) + return -ENODEV; + + /* Ask the devices for the number of CSROWS and CHANNELS so + * that we can calculate the memory resources, etc + * + * The Chipset will report what it can handle which will be greater + * or equal to what the motherboard manufacturer will implement. + * + * As we don't have a motherboard identification routine to determine + * actual number of slots/dimms per channel, we thus utilize the + * resource as specified by the chipset. Thus, we might have + * have more DIMMs per channel than actually on the mobo, but this + * allows the driver to support up to the chipset max, without + * some fancy mobo determination. + */ + i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, + &num_channels); + + edac_dbg(0, "MC: Number of Branches=2 Channels= %d DIMMS= %d\n", + num_channels, num_dimms_per_channel); + + /* allocate a new MC control structure */ + + layers[0].type = EDAC_MC_LAYER_BRANCH; + layers[0].size = MAX_BRANCHES; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = num_channels / MAX_BRANCHES; + layers[1].is_virt_csrow = false; + layers[2].type = EDAC_MC_LAYER_SLOT; + layers[2].size = num_dimms_per_channel; + layers[2].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p\n", mci); + + mci->pdev = &pdev->dev; /* record ptr to the generic device */ + + pvt = mci->pvt_info; + pvt->system_address = pdev; /* Record this device in our private */ + pvt->maxch = num_channels; + pvt->maxdimmperch = num_dimms_per_channel; + + /* 'get' the pci devices we want to reserve for our use */ + if (i5000_get_devices(mci, dev_idx)) + goto fail0; + + /* Time to get serious */ + i5000_get_mc_regs(mci); /* retrieve the hardware registers */ + + mci->mc_idx = 0; + mci->mtype_cap = MEM_FLAG_FB_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "i5000_edac.c"; + mci->ctl_name = i5000_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + /* Set the function pointer to an actual operation function */ + mci->edac_check = i5000_check_error; + + /* initialize the MC control structure 'csrows' table + * with the mapping and control information */ + if (i5000_init_csrows(mci)) { + edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5000_init_csrows() returned nonzero value\n"); + mci->edac_cap = EDAC_FLAG_NONE; /* no csrows found */ + } else { + edac_dbg(1, "MC: Enable error reporting now\n"); + i5000_enable_error_reporting(mci); + } + + /* add this new MC control structure to EDAC's list of MCs */ + if (edac_mc_add_mc(mci)) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + /* FIXME: perhaps some code should go here that disables error + * reporting if we just enabled it + */ + goto fail1; + } + + i5000_clear_error(mci); + + /* allocating generic PCI control info */ + i5000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i5000_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + return 0; + + /* Error exit unwinding stack */ +fail1: + + i5000_put_devices(mci); + +fail0: + edac_mc_free(mci); + return -ENODEV; +} + +/* + * i5000_init_one constructor for one instance of device + * + * returns: + * negative on error + * count (>= 0) + */ +static int i5000_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + /* wake up device */ + rc = pci_enable_device(pdev); + if (rc) + return rc; + + /* now probe and enable the device */ + return i5000_probe1(pdev, id->driver_data); +} + +/* + * i5000_remove_one destructor for one instance of device + * + */ +static void i5000_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (i5000_pci) + edac_pci_release_generic_ctl(i5000_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + /* retrieve references to resources, and free those resources */ + i5000_put_devices(mci); + edac_mc_free(mci); +} + +/* + * pci_device_id table for which devices we are looking for + * + * The "E500P" device is the first device supported. + */ +static const struct pci_device_id i5000_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I5000_DEV16), + .driver_data = I5000P}, + + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i5000_pci_tbl); + +/* + * i5000_driver pci_driver structure for this module + * + */ +static struct pci_driver i5000_driver = { + .name = KBUILD_BASENAME, + .probe = i5000_init_one, + .remove = i5000_remove_one, + .id_table = i5000_pci_tbl, +}; + +/* + * i5000_init Module entry function + * Try to initialize this module for its devices + */ +static int __init i5000_init(void) +{ + int pci_rc; + + edac_dbg(2, "MC:\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i5000_driver); + + return (pci_rc < 0) ? pci_rc : 0; +} + +/* + * i5000_exit() Module exit function + * Unregister the driver + */ +static void __exit i5000_exit(void) +{ + edac_dbg(2, "MC:\n"); + pci_unregister_driver(&i5000_driver); +} + +module_init(i5000_init); +module_exit(i5000_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR + ("Linux Networx (http://lnxi.com) Doug Thompson <norsk5@xmission.com>"); +MODULE_DESCRIPTION("MC Driver for Intel I5000 memory controllers - " + I5000_REVISION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); +module_param(misc_messages, int, 0444); +MODULE_PARM_DESC(misc_messages, "Log miscellaneous non fatal messages"); + diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c new file mode 100644 index 000000000..f5d82518c --- /dev/null +++ b/drivers/edac/i5100_edac.c @@ -0,0 +1,1225 @@ +/* + * Intel 5100 Memory Controllers kernel module + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * This module is based on the following document: + * + * Intel 5100X Chipset Memory Controller Hub (MCH) - Datasheet + * http://download.intel.com/design/chipsets/datashts/318378.pdf + * + * The intel 5100 has two independent channels. EDAC core currently + * can not reflect this configuration so instead the chip-select + * rows for each respective channel are laid out one after another, + * the first half belonging to channel 0, the second half belonging + * to channel 1. + * + * This driver is for DDR2 DIMMs, and it uses chip select to select among the + * several ranks. However, instead of showing memories as ranks, it outputs + * them as DIMM's. An internal table creates the association between ranks + * and DIMM's. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include <linux/delay.h> +#include <linux/mmzone.h> +#include <linux/debugfs.h> + +#include "edac_module.h" + +/* register addresses */ + +/* device 16, func 1 */ +#define I5100_MC 0x40 /* Memory Control Register */ +#define I5100_MC_SCRBEN_MASK (1 << 7) +#define I5100_MC_SCRBDONE_MASK (1 << 4) +#define I5100_MS 0x44 /* Memory Status Register */ +#define I5100_SPDDATA 0x48 /* Serial Presence Detect Status Reg */ +#define I5100_SPDCMD 0x4c /* Serial Presence Detect Command Reg */ +#define I5100_TOLM 0x6c /* Top of Low Memory */ +#define I5100_MIR0 0x80 /* Memory Interleave Range 0 */ +#define I5100_MIR1 0x84 /* Memory Interleave Range 1 */ +#define I5100_AMIR_0 0x8c /* Adjusted Memory Interleave Range 0 */ +#define I5100_AMIR_1 0x90 /* Adjusted Memory Interleave Range 1 */ +#define I5100_FERR_NF_MEM 0xa0 /* MC First Non Fatal Errors */ +#define I5100_FERR_NF_MEM_M16ERR_MASK (1 << 16) +#define I5100_FERR_NF_MEM_M15ERR_MASK (1 << 15) +#define I5100_FERR_NF_MEM_M14ERR_MASK (1 << 14) +#define I5100_FERR_NF_MEM_M12ERR_MASK (1 << 12) +#define I5100_FERR_NF_MEM_M11ERR_MASK (1 << 11) +#define I5100_FERR_NF_MEM_M10ERR_MASK (1 << 10) +#define I5100_FERR_NF_MEM_M6ERR_MASK (1 << 6) +#define I5100_FERR_NF_MEM_M5ERR_MASK (1 << 5) +#define I5100_FERR_NF_MEM_M4ERR_MASK (1 << 4) +#define I5100_FERR_NF_MEM_M1ERR_MASK (1 << 1) +#define I5100_FERR_NF_MEM_ANY_MASK \ + (I5100_FERR_NF_MEM_M16ERR_MASK | \ + I5100_FERR_NF_MEM_M15ERR_MASK | \ + I5100_FERR_NF_MEM_M14ERR_MASK | \ + I5100_FERR_NF_MEM_M12ERR_MASK | \ + I5100_FERR_NF_MEM_M11ERR_MASK | \ + I5100_FERR_NF_MEM_M10ERR_MASK | \ + I5100_FERR_NF_MEM_M6ERR_MASK | \ + I5100_FERR_NF_MEM_M5ERR_MASK | \ + I5100_FERR_NF_MEM_M4ERR_MASK | \ + I5100_FERR_NF_MEM_M1ERR_MASK) +#define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */ +#define I5100_EMASK_MEM 0xa8 /* MC Error Mask Register */ +#define I5100_MEM0EINJMSK0 0x200 /* Injection Mask0 Register Channel 0 */ +#define I5100_MEM1EINJMSK0 0x208 /* Injection Mask0 Register Channel 1 */ +#define I5100_MEMXEINJMSK0_EINJEN (1 << 27) +#define I5100_MEM0EINJMSK1 0x204 /* Injection Mask1 Register Channel 0 */ +#define I5100_MEM1EINJMSK1 0x206 /* Injection Mask1 Register Channel 1 */ + +/* Device 19, Function 0 */ +#define I5100_DINJ0 0x9a + +/* device 21 and 22, func 0 */ +#define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */ +#define I5100_DMIR 0x15c /* DIMM Interleave Range */ +#define I5100_VALIDLOG 0x18c /* Valid Log Markers */ +#define I5100_NRECMEMA 0x190 /* Non-Recoverable Memory Error Log Reg A */ +#define I5100_NRECMEMB 0x194 /* Non-Recoverable Memory Error Log Reg B */ +#define I5100_REDMEMA 0x198 /* Recoverable Memory Data Error Log Reg A */ +#define I5100_REDMEMB 0x19c /* Recoverable Memory Data Error Log Reg B */ +#define I5100_RECMEMA 0x1a0 /* Recoverable Memory Error Log Reg A */ +#define I5100_RECMEMB 0x1a4 /* Recoverable Memory Error Log Reg B */ +#define I5100_MTR_4 0x1b0 /* Memory Technology Registers 4,5 */ + +/* bit field accessors */ + +static inline u32 i5100_mc_scrben(u32 mc) +{ + return mc >> 7 & 1; +} + +static inline u32 i5100_mc_errdeten(u32 mc) +{ + return mc >> 5 & 1; +} + +static inline u32 i5100_mc_scrbdone(u32 mc) +{ + return mc >> 4 & 1; +} + +static inline u16 i5100_spddata_rdo(u16 a) +{ + return a >> 15 & 1; +} + +static inline u16 i5100_spddata_sbe(u16 a) +{ + return a >> 13 & 1; +} + +static inline u16 i5100_spddata_busy(u16 a) +{ + return a >> 12 & 1; +} + +static inline u16 i5100_spddata_data(u16 a) +{ + return a & ((1 << 8) - 1); +} + +static inline u32 i5100_spdcmd_create(u32 dti, u32 ckovrd, u32 sa, u32 ba, + u32 data, u32 cmd) +{ + return ((dti & ((1 << 4) - 1)) << 28) | + ((ckovrd & 1) << 27) | + ((sa & ((1 << 3) - 1)) << 24) | + ((ba & ((1 << 8) - 1)) << 16) | + ((data & ((1 << 8) - 1)) << 8) | + (cmd & 1); +} + +static inline u16 i5100_tolm_tolm(u16 a) +{ + return a >> 12 & ((1 << 4) - 1); +} + +static inline u16 i5100_mir_limit(u16 a) +{ + return a >> 4 & ((1 << 12) - 1); +} + +static inline u16 i5100_mir_way1(u16 a) +{ + return a >> 1 & 1; +} + +static inline u16 i5100_mir_way0(u16 a) +{ + return a & 1; +} + +static inline u32 i5100_ferr_nf_mem_chan_indx(u32 a) +{ + return a >> 28 & 1; +} + +static inline u32 i5100_ferr_nf_mem_any(u32 a) +{ + return a & I5100_FERR_NF_MEM_ANY_MASK; +} + +static inline u32 i5100_nerr_nf_mem_any(u32 a) +{ + return i5100_ferr_nf_mem_any(a); +} + +static inline u32 i5100_dmir_limit(u32 a) +{ + return a >> 16 & ((1 << 11) - 1); +} + +static inline u32 i5100_dmir_rank(u32 a, u32 i) +{ + return a >> (4 * i) & ((1 << 2) - 1); +} + +static inline u16 i5100_mtr_present(u16 a) +{ + return a >> 10 & 1; +} + +static inline u16 i5100_mtr_ethrottle(u16 a) +{ + return a >> 9 & 1; +} + +static inline u16 i5100_mtr_width(u16 a) +{ + return a >> 8 & 1; +} + +static inline u16 i5100_mtr_numbank(u16 a) +{ + return a >> 6 & 1; +} + +static inline u16 i5100_mtr_numrow(u16 a) +{ + return a >> 2 & ((1 << 2) - 1); +} + +static inline u16 i5100_mtr_numcol(u16 a) +{ + return a & ((1 << 2) - 1); +} + + +static inline u32 i5100_validlog_redmemvalid(u32 a) +{ + return a >> 2 & 1; +} + +static inline u32 i5100_validlog_recmemvalid(u32 a) +{ + return a >> 1 & 1; +} + +static inline u32 i5100_validlog_nrecmemvalid(u32 a) +{ + return a & 1; +} + +static inline u32 i5100_nrecmema_merr(u32 a) +{ + return a >> 15 & ((1 << 5) - 1); +} + +static inline u32 i5100_nrecmema_bank(u32 a) +{ + return a >> 12 & ((1 << 3) - 1); +} + +static inline u32 i5100_nrecmema_rank(u32 a) +{ + return a >> 8 & ((1 << 3) - 1); +} + +static inline u32 i5100_nrecmemb_cas(u32 a) +{ + return a >> 16 & ((1 << 13) - 1); +} + +static inline u32 i5100_nrecmemb_ras(u32 a) +{ + return a & ((1 << 16) - 1); +} + +static inline u32 i5100_recmema_merr(u32 a) +{ + return i5100_nrecmema_merr(a); +} + +static inline u32 i5100_recmema_bank(u32 a) +{ + return i5100_nrecmema_bank(a); +} + +static inline u32 i5100_recmema_rank(u32 a) +{ + return i5100_nrecmema_rank(a); +} + +static inline u32 i5100_recmemb_cas(u32 a) +{ + return i5100_nrecmemb_cas(a); +} + +static inline u32 i5100_recmemb_ras(u32 a) +{ + return i5100_nrecmemb_ras(a); +} + +/* some generic limits */ +#define I5100_MAX_RANKS_PER_CHAN 6 +#define I5100_CHANNELS 2 +#define I5100_MAX_RANKS_PER_DIMM 4 +#define I5100_DIMM_ADDR_LINES (6 - 3) /* 64 bits / 8 bits per byte */ +#define I5100_MAX_DIMM_SLOTS_PER_CHAN 4 +#define I5100_MAX_RANK_INTERLEAVE 4 +#define I5100_MAX_DMIRS 5 +#define I5100_SCRUB_REFRESH_RATE (5 * 60 * HZ) + +struct i5100_priv { + /* ranks on each dimm -- 0 maps to not present -- obtained via SPD */ + int dimm_numrank[I5100_CHANNELS][I5100_MAX_DIMM_SLOTS_PER_CHAN]; + + /* + * mainboard chip select map -- maps i5100 chip selects to + * DIMM slot chip selects. In the case of only 4 ranks per + * channel, the mapping is fairly obvious but not unique. + * we map -1 -> NC and assume both channels use the same + * map... + * + */ + int dimm_csmap[I5100_MAX_DIMM_SLOTS_PER_CHAN][I5100_MAX_RANKS_PER_DIMM]; + + /* memory interleave range */ + struct { + u64 limit; + unsigned way[2]; + } mir[I5100_CHANNELS]; + + /* adjusted memory interleave range register */ + unsigned amir[I5100_CHANNELS]; + + /* dimm interleave range */ + struct { + unsigned rank[I5100_MAX_RANK_INTERLEAVE]; + u64 limit; + } dmir[I5100_CHANNELS][I5100_MAX_DMIRS]; + + /* memory technology registers... */ + struct { + unsigned present; /* 0 or 1 */ + unsigned ethrottle; /* 0 or 1 */ + unsigned width; /* 4 or 8 bits */ + unsigned numbank; /* 2 or 3 lines */ + unsigned numrow; /* 13 .. 16 lines */ + unsigned numcol; /* 11 .. 12 lines */ + } mtr[I5100_CHANNELS][I5100_MAX_RANKS_PER_CHAN]; + + u64 tolm; /* top of low memory in bytes */ + unsigned ranksperchan; /* number of ranks per channel */ + + struct pci_dev *mc; /* device 16 func 1 */ + struct pci_dev *einj; /* device 19 func 0 */ + struct pci_dev *ch0mm; /* device 21 func 0 */ + struct pci_dev *ch1mm; /* device 22 func 0 */ + + struct delayed_work i5100_scrubbing; + int scrub_enable; + + /* Error injection */ + u8 inject_channel; + u8 inject_hlinesel; + u8 inject_deviceptr1; + u8 inject_deviceptr2; + u16 inject_eccmask1; + u16 inject_eccmask2; + + struct dentry *debugfs; +}; + +static struct dentry *i5100_debugfs; + +/* map a rank/chan to a slot number on the mainboard */ +static int i5100_rank_to_slot(const struct mem_ctl_info *mci, + int chan, int rank) +{ + const struct i5100_priv *priv = mci->pvt_info; + int i; + + for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) { + int j; + const int numrank = priv->dimm_numrank[chan][i]; + + for (j = 0; j < numrank; j++) + if (priv->dimm_csmap[i][j] == rank) + return i * 2 + chan; + } + + return -1; +} + +static const char *i5100_err_msg(unsigned err) +{ + static const char *merrs[] = { + "unknown", /* 0 */ + "uncorrectable data ECC on replay", /* 1 */ + "unknown", /* 2 */ + "unknown", /* 3 */ + "aliased uncorrectable demand data ECC", /* 4 */ + "aliased uncorrectable spare-copy data ECC", /* 5 */ + "aliased uncorrectable patrol data ECC", /* 6 */ + "unknown", /* 7 */ + "unknown", /* 8 */ + "unknown", /* 9 */ + "non-aliased uncorrectable demand data ECC", /* 10 */ + "non-aliased uncorrectable spare-copy data ECC", /* 11 */ + "non-aliased uncorrectable patrol data ECC", /* 12 */ + "unknown", /* 13 */ + "correctable demand data ECC", /* 14 */ + "correctable spare-copy data ECC", /* 15 */ + "correctable patrol data ECC", /* 16 */ + "unknown", /* 17 */ + "SPD protocol error", /* 18 */ + "unknown", /* 19 */ + "spare copy initiated", /* 20 */ + "spare copy completed", /* 21 */ + }; + unsigned i; + + for (i = 0; i < ARRAY_SIZE(merrs); i++) + if (1 << i & err) + return merrs[i]; + + return "none"; +} + +/* convert csrow index into a rank (per channel -- 0..5) */ +static unsigned int i5100_csrow_to_rank(const struct mem_ctl_info *mci, + unsigned int csrow) +{ + const struct i5100_priv *priv = mci->pvt_info; + + return csrow % priv->ranksperchan; +} + +/* convert csrow index into a channel (0..1) */ +static unsigned int i5100_csrow_to_chan(const struct mem_ctl_info *mci, + unsigned int csrow) +{ + const struct i5100_priv *priv = mci->pvt_info; + + return csrow / priv->ranksperchan; +} + +static void i5100_handle_ce(struct mem_ctl_info *mci, + int chan, + unsigned bank, + unsigned rank, + unsigned long syndrome, + unsigned cas, + unsigned ras, + const char *msg) +{ + char detail[80]; + + /* Form out message */ + snprintf(detail, sizeof(detail), + "bank %u, cas %u, ras %u\n", + bank, cas, ras); + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + 0, 0, syndrome, + chan, rank, -1, + msg, detail); +} + +static void i5100_handle_ue(struct mem_ctl_info *mci, + int chan, + unsigned bank, + unsigned rank, + unsigned long syndrome, + unsigned cas, + unsigned ras, + const char *msg) +{ + char detail[80]; + + /* Form out message */ + snprintf(detail, sizeof(detail), + "bank %u, cas %u, ras %u\n", + bank, cas, ras); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + 0, 0, syndrome, + chan, rank, -1, + msg, detail); +} + +static void i5100_read_log(struct mem_ctl_info *mci, int chan, + u32 ferr, u32 nerr) +{ + struct i5100_priv *priv = mci->pvt_info; + struct pci_dev *pdev = (chan) ? priv->ch1mm : priv->ch0mm; + u32 dw; + u32 dw2; + unsigned syndrome = 0; + unsigned merr; + unsigned bank; + unsigned rank; + unsigned cas; + unsigned ras; + + pci_read_config_dword(pdev, I5100_VALIDLOG, &dw); + + if (i5100_validlog_redmemvalid(dw)) { + pci_read_config_dword(pdev, I5100_REDMEMA, &dw2); + syndrome = dw2; + pci_read_config_dword(pdev, I5100_REDMEMB, &dw2); + } + + if (i5100_validlog_recmemvalid(dw)) { + const char *msg; + + pci_read_config_dword(pdev, I5100_RECMEMA, &dw2); + merr = i5100_recmema_merr(dw2); + bank = i5100_recmema_bank(dw2); + rank = i5100_recmema_rank(dw2); + + pci_read_config_dword(pdev, I5100_RECMEMB, &dw2); + cas = i5100_recmemb_cas(dw2); + ras = i5100_recmemb_ras(dw2); + + /* FIXME: not really sure if this is what merr is... + */ + if (!merr) + msg = i5100_err_msg(ferr); + else + msg = i5100_err_msg(nerr); + + i5100_handle_ce(mci, chan, bank, rank, syndrome, cas, ras, msg); + } + + if (i5100_validlog_nrecmemvalid(dw)) { + const char *msg; + + pci_read_config_dword(pdev, I5100_NRECMEMA, &dw2); + merr = i5100_nrecmema_merr(dw2); + bank = i5100_nrecmema_bank(dw2); + rank = i5100_nrecmema_rank(dw2); + + pci_read_config_dword(pdev, I5100_NRECMEMB, &dw2); + cas = i5100_nrecmemb_cas(dw2); + ras = i5100_nrecmemb_ras(dw2); + + /* FIXME: not really sure if this is what merr is... + */ + if (!merr) + msg = i5100_err_msg(ferr); + else + msg = i5100_err_msg(nerr); + + i5100_handle_ue(mci, chan, bank, rank, syndrome, cas, ras, msg); + } + + pci_write_config_dword(pdev, I5100_VALIDLOG, dw); +} + +static void i5100_check_error(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + u32 dw, dw2; + + pci_read_config_dword(priv->mc, I5100_FERR_NF_MEM, &dw); + if (i5100_ferr_nf_mem_any(dw)) { + + pci_read_config_dword(priv->mc, I5100_NERR_NF_MEM, &dw2); + + i5100_read_log(mci, i5100_ferr_nf_mem_chan_indx(dw), + i5100_ferr_nf_mem_any(dw), + i5100_nerr_nf_mem_any(dw2)); + + pci_write_config_dword(priv->mc, I5100_NERR_NF_MEM, dw2); + } + pci_write_config_dword(priv->mc, I5100_FERR_NF_MEM, dw); +} + +/* The i5100 chipset will scrub the entire memory once, then + * set a done bit. Continuous scrubbing is achieved by enqueing + * delayed work to a workqueue, checking every few minutes if + * the scrubbing has completed and if so reinitiating it. + */ + +static void i5100_refresh_scrubbing(struct work_struct *work) +{ + struct delayed_work *i5100_scrubbing = to_delayed_work(work); + struct i5100_priv *priv = container_of(i5100_scrubbing, + struct i5100_priv, + i5100_scrubbing); + u32 dw; + + pci_read_config_dword(priv->mc, I5100_MC, &dw); + + if (priv->scrub_enable) { + + pci_read_config_dword(priv->mc, I5100_MC, &dw); + + if (i5100_mc_scrbdone(dw)) { + dw |= I5100_MC_SCRBEN_MASK; + pci_write_config_dword(priv->mc, I5100_MC, dw); + pci_read_config_dword(priv->mc, I5100_MC, &dw); + } + + schedule_delayed_work(&(priv->i5100_scrubbing), + I5100_SCRUB_REFRESH_RATE); + } +} +/* + * The bandwidth is based on experimentation, feel free to refine it. + */ +static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth) +{ + struct i5100_priv *priv = mci->pvt_info; + u32 dw; + + pci_read_config_dword(priv->mc, I5100_MC, &dw); + if (bandwidth) { + priv->scrub_enable = 1; + dw |= I5100_MC_SCRBEN_MASK; + schedule_delayed_work(&(priv->i5100_scrubbing), + I5100_SCRUB_REFRESH_RATE); + } else { + priv->scrub_enable = 0; + dw &= ~I5100_MC_SCRBEN_MASK; + cancel_delayed_work(&(priv->i5100_scrubbing)); + } + pci_write_config_dword(priv->mc, I5100_MC, dw); + + pci_read_config_dword(priv->mc, I5100_MC, &dw); + + bandwidth = 5900000 * i5100_mc_scrben(dw); + + return bandwidth; +} + +static int i5100_get_scrub_rate(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + u32 dw; + + pci_read_config_dword(priv->mc, I5100_MC, &dw); + + return 5900000 * i5100_mc_scrben(dw); +} + +static struct pci_dev *pci_get_device_func(unsigned vendor, + unsigned device, + unsigned func) +{ + struct pci_dev *ret = NULL; + + while (1) { + ret = pci_get_device(vendor, device, ret); + + if (!ret) + break; + + if (PCI_FUNC(ret->devfn) == func) + break; + } + + return ret; +} + +static unsigned long i5100_npages(struct mem_ctl_info *mci, unsigned int csrow) +{ + struct i5100_priv *priv = mci->pvt_info; + const unsigned int chan_rank = i5100_csrow_to_rank(mci, csrow); + const unsigned int chan = i5100_csrow_to_chan(mci, csrow); + unsigned addr_lines; + + /* dimm present? */ + if (!priv->mtr[chan][chan_rank].present) + return 0ULL; + + addr_lines = + I5100_DIMM_ADDR_LINES + + priv->mtr[chan][chan_rank].numcol + + priv->mtr[chan][chan_rank].numrow + + priv->mtr[chan][chan_rank].numbank; + + return (unsigned long) + ((unsigned long long) (1ULL << addr_lines) / PAGE_SIZE); +} + +static void i5100_init_mtr(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm }; + int i; + + for (i = 0; i < I5100_CHANNELS; i++) { + int j; + struct pci_dev *pdev = mms[i]; + + for (j = 0; j < I5100_MAX_RANKS_PER_CHAN; j++) { + const unsigned addr = + (j < 4) ? I5100_MTR_0 + j * 2 : + I5100_MTR_4 + (j - 4) * 2; + u16 w; + + pci_read_config_word(pdev, addr, &w); + + priv->mtr[i][j].present = i5100_mtr_present(w); + priv->mtr[i][j].ethrottle = i5100_mtr_ethrottle(w); + priv->mtr[i][j].width = 4 + 4 * i5100_mtr_width(w); + priv->mtr[i][j].numbank = 2 + i5100_mtr_numbank(w); + priv->mtr[i][j].numrow = 13 + i5100_mtr_numrow(w); + priv->mtr[i][j].numcol = 10 + i5100_mtr_numcol(w); + } + } +} + +/* + * FIXME: make this into a real i2c adapter (so that dimm-decode + * will work)? + */ +static int i5100_read_spd_byte(const struct mem_ctl_info *mci, + u8 ch, u8 slot, u8 addr, u8 *byte) +{ + struct i5100_priv *priv = mci->pvt_info; + u16 w; + + pci_read_config_word(priv->mc, I5100_SPDDATA, &w); + if (i5100_spddata_busy(w)) + return -1; + + pci_write_config_dword(priv->mc, I5100_SPDCMD, + i5100_spdcmd_create(0xa, 1, ch * 4 + slot, addr, + 0, 0)); + + /* wait up to 100ms */ + udelay(100); + while (1) { + pci_read_config_word(priv->mc, I5100_SPDDATA, &w); + if (!i5100_spddata_busy(w)) + break; + udelay(100); + } + + if (!i5100_spddata_rdo(w) || i5100_spddata_sbe(w)) + return -1; + + *byte = i5100_spddata_data(w); + + return 0; +} + +/* + * fill dimm chip select map + * + * FIXME: + * o not the only way to may chip selects to dimm slots + * o investigate if there is some way to obtain this map from the bios + */ +static void i5100_init_dimm_csmap(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + int i; + + for (i = 0; i < I5100_MAX_DIMM_SLOTS_PER_CHAN; i++) { + int j; + + for (j = 0; j < I5100_MAX_RANKS_PER_DIMM; j++) + priv->dimm_csmap[i][j] = -1; /* default NC */ + } + + /* only 2 chip selects per slot... */ + if (priv->ranksperchan == 4) { + priv->dimm_csmap[0][0] = 0; + priv->dimm_csmap[0][1] = 3; + priv->dimm_csmap[1][0] = 1; + priv->dimm_csmap[1][1] = 2; + priv->dimm_csmap[2][0] = 2; + priv->dimm_csmap[3][0] = 3; + } else { + priv->dimm_csmap[0][0] = 0; + priv->dimm_csmap[0][1] = 1; + priv->dimm_csmap[1][0] = 2; + priv->dimm_csmap[1][1] = 3; + priv->dimm_csmap[2][0] = 4; + priv->dimm_csmap[2][1] = 5; + } +} + +static void i5100_init_dimm_layout(struct pci_dev *pdev, + struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + int i; + + for (i = 0; i < I5100_CHANNELS; i++) { + int j; + + for (j = 0; j < I5100_MAX_DIMM_SLOTS_PER_CHAN; j++) { + u8 rank; + + if (i5100_read_spd_byte(mci, i, j, 5, &rank) < 0) + priv->dimm_numrank[i][j] = 0; + else + priv->dimm_numrank[i][j] = (rank & 3) + 1; + } + } + + i5100_init_dimm_csmap(mci); +} + +static void i5100_init_interleaving(struct pci_dev *pdev, + struct mem_ctl_info *mci) +{ + u16 w; + u32 dw; + struct i5100_priv *priv = mci->pvt_info; + struct pci_dev *mms[2] = { priv->ch0mm, priv->ch1mm }; + int i; + + pci_read_config_word(pdev, I5100_TOLM, &w); + priv->tolm = (u64) i5100_tolm_tolm(w) * 256 * 1024 * 1024; + + pci_read_config_word(pdev, I5100_MIR0, &w); + priv->mir[0].limit = (u64) i5100_mir_limit(w) << 28; + priv->mir[0].way[1] = i5100_mir_way1(w); + priv->mir[0].way[0] = i5100_mir_way0(w); + + pci_read_config_word(pdev, I5100_MIR1, &w); + priv->mir[1].limit = (u64) i5100_mir_limit(w) << 28; + priv->mir[1].way[1] = i5100_mir_way1(w); + priv->mir[1].way[0] = i5100_mir_way0(w); + + pci_read_config_word(pdev, I5100_AMIR_0, &w); + priv->amir[0] = w; + pci_read_config_word(pdev, I5100_AMIR_1, &w); + priv->amir[1] = w; + + for (i = 0; i < I5100_CHANNELS; i++) { + int j; + + for (j = 0; j < 5; j++) { + int k; + + pci_read_config_dword(mms[i], I5100_DMIR + j * 4, &dw); + + priv->dmir[i][j].limit = + (u64) i5100_dmir_limit(dw) << 28; + for (k = 0; k < I5100_MAX_RANKS_PER_DIMM; k++) + priv->dmir[i][j].rank[k] = + i5100_dmir_rank(dw, k); + } + } + + i5100_init_mtr(mci); +} + +static void i5100_init_csrows(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + struct dimm_info *dimm; + + mci_for_each_dimm(mci, dimm) { + const unsigned long npages = i5100_npages(mci, dimm->idx); + const unsigned int chan = i5100_csrow_to_chan(mci, dimm->idx); + const unsigned int rank = i5100_csrow_to_rank(mci, dimm->idx); + + if (!npages) + continue; + + dimm->nr_pages = npages; + dimm->grain = 32; + dimm->dtype = (priv->mtr[chan][rank].width == 4) ? + DEV_X4 : DEV_X8; + dimm->mtype = MEM_RDDR2; + dimm->edac_mode = EDAC_SECDED; + snprintf(dimm->label, sizeof(dimm->label), "DIMM%u", + i5100_rank_to_slot(mci, chan, rank)); + + edac_dbg(2, "dimm channel %d, rank %d, size %ld\n", + chan, rank, (long)PAGES_TO_MiB(npages)); + } +} + +/**************************************************************************** + * Error injection routines + ****************************************************************************/ + +static void i5100_do_inject(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + u32 mask0; + u16 mask1; + + /* MEM[1:0]EINJMSK0 + * 31 - ADDRMATCHEN + * 29:28 - HLINESEL + * 00 Reserved + * 01 Lower half of cache line + * 10 Upper half of cache line + * 11 Both upper and lower parts of cache line + * 27 - EINJEN + * 25:19 - XORMASK1 for deviceptr1 + * 9:5 - SEC2RAM for deviceptr2 + * 4:0 - FIR2RAM for deviceptr1 + */ + mask0 = ((priv->inject_hlinesel & 0x3) << 28) | + I5100_MEMXEINJMSK0_EINJEN | + ((priv->inject_eccmask1 & 0xffff) << 10) | + ((priv->inject_deviceptr2 & 0x1f) << 5) | + (priv->inject_deviceptr1 & 0x1f); + + /* MEM[1:0]EINJMSK1 + * 15:0 - XORMASK2 for deviceptr2 + */ + mask1 = priv->inject_eccmask2; + + if (priv->inject_channel == 0) { + pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0); + pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1); + } else { + pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0); + pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1); + } + + /* Error Injection Response Function + * Intel 5100 Memory Controller Hub Chipset (318378) datasheet + * hints about this register but carry no data about them. All + * data regarding device 19 is based on experimentation and the + * Intel 7300 Chipset Memory Controller Hub (318082) datasheet + * which appears to be accurate for the i5100 in this area. + * + * The injection code don't work without setting this register. + * The register needs to be flipped off then on else the hardware + * will only preform the first injection. + * + * Stop condition bits 7:4 + * 1010 - Stop after one injection + * 1011 - Never stop injecting faults + * + * Start condition bits 3:0 + * 1010 - Never start + * 1011 - Start immediately + */ + pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa); + pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab); +} + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) +static ssize_t inject_enable_write(struct file *file, const char __user *data, + size_t count, loff_t *ppos) +{ + struct device *dev = file->private_data; + struct mem_ctl_info *mci = to_mci(dev); + + i5100_do_inject(mci); + + return count; +} + +static const struct file_operations i5100_inject_enable_fops = { + .open = simple_open, + .write = inject_enable_write, + .llseek = generic_file_llseek, +}; + +static int i5100_setup_debugfs(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + + if (!i5100_debugfs) + return -ENODEV; + + priv->debugfs = edac_debugfs_create_dir_at(mci->bus->name, i5100_debugfs); + + if (!priv->debugfs) + return -ENOMEM; + + edac_debugfs_create_x8("inject_channel", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_channel); + edac_debugfs_create_x8("inject_hlinesel", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_hlinesel); + edac_debugfs_create_x8("inject_deviceptr1", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_deviceptr1); + edac_debugfs_create_x8("inject_deviceptr2", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_deviceptr2); + edac_debugfs_create_x16("inject_eccmask1", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_eccmask1); + edac_debugfs_create_x16("inject_eccmask2", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_eccmask2); + edac_debugfs_create_file("inject_enable", S_IWUSR, priv->debugfs, + &mci->dev, &i5100_inject_enable_fops); + + return 0; + +} + +static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rc; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct i5100_priv *priv; + struct pci_dev *ch0mm, *ch1mm, *einj; + int ret = 0; + u32 dw; + int ranksperch; + + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + rc = pci_enable_device(pdev); + if (rc < 0) { + ret = rc; + goto bail; + } + + /* ECC enabled? */ + pci_read_config_dword(pdev, I5100_MC, &dw); + if (!i5100_mc_errdeten(dw)) { + printk(KERN_INFO "i5100_edac: ECC not enabled.\n"); + ret = -ENODEV; + goto bail_pdev; + } + + /* figure out how many ranks, from strapped state of 48GB_Mode input */ + pci_read_config_dword(pdev, I5100_MS, &dw); + ranksperch = !!(dw & (1 << 8)) * 2 + 4; + + /* enable error reporting... */ + pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw); + dw &= ~I5100_FERR_NF_MEM_ANY_MASK; + pci_write_config_dword(pdev, I5100_EMASK_MEM, dw); + + /* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */ + ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5100_21, 0); + if (!ch0mm) { + ret = -ENODEV; + goto bail_pdev; + } + + rc = pci_enable_device(ch0mm); + if (rc < 0) { + ret = rc; + goto bail_ch0; + } + + /* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */ + ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5100_22, 0); + if (!ch1mm) { + ret = -ENODEV; + goto bail_disable_ch0; + } + + rc = pci_enable_device(ch1mm); + if (rc < 0) { + ret = rc; + goto bail_ch1; + } + + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = 2; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = ranksperch; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(*priv)); + if (!mci) { + ret = -ENOMEM; + goto bail_disable_ch1; + } + + + /* device 19, func 0, Error injection */ + einj = pci_get_device_func(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5100_19, 0); + if (!einj) { + ret = -ENODEV; + goto bail_mc_free; + } + + rc = pci_enable_device(einj); + if (rc < 0) { + ret = rc; + goto bail_einj; + } + + mci->pdev = &pdev->dev; + + priv = mci->pvt_info; + priv->ranksperchan = ranksperch; + priv->mc = pdev; + priv->ch0mm = ch0mm; + priv->ch1mm = ch1mm; + priv->einj = einj; + + INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing); + + /* If scrubbing was already enabled by the bios, start maintaining it */ + pci_read_config_dword(pdev, I5100_MC, &dw); + if (i5100_mc_scrben(dw)) { + priv->scrub_enable = 1; + schedule_delayed_work(&(priv->i5100_scrubbing), + I5100_SCRUB_REFRESH_RATE); + } + + i5100_init_dimm_layout(pdev, mci); + i5100_init_interleaving(pdev, mci); + + mci->mtype_cap = MEM_FLAG_FB_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = "i5100_edac.c"; + mci->ctl_name = "i5100"; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + mci->edac_check = i5100_check_error; + mci->set_sdram_scrub_rate = i5100_set_scrub_rate; + mci->get_sdram_scrub_rate = i5100_get_scrub_rate; + + priv->inject_channel = 0; + priv->inject_hlinesel = 0; + priv->inject_deviceptr1 = 0; + priv->inject_deviceptr2 = 0; + priv->inject_eccmask1 = 0; + priv->inject_eccmask2 = 0; + + i5100_init_csrows(mci); + + /* this strange construction seems to be in every driver, dunno why */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_NMI: + break; + default: + edac_op_state = EDAC_OPSTATE_POLL; + break; + } + + if (edac_mc_add_mc(mci)) { + ret = -ENODEV; + goto bail_scrub; + } + + i5100_setup_debugfs(mci); + + return ret; + +bail_scrub: + priv->scrub_enable = 0; + cancel_delayed_work_sync(&(priv->i5100_scrubbing)); + pci_disable_device(einj); + +bail_einj: + pci_dev_put(einj); + +bail_mc_free: + edac_mc_free(mci); + +bail_disable_ch1: + pci_disable_device(ch1mm); + +bail_ch1: + pci_dev_put(ch1mm); + +bail_disable_ch0: + pci_disable_device(ch0mm); + +bail_ch0: + pci_dev_put(ch0mm); + +bail_pdev: + pci_disable_device(pdev); + +bail: + return ret; +} + +static void i5100_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i5100_priv *priv; + + mci = edac_mc_del_mc(&pdev->dev); + + if (!mci) + return; + + priv = mci->pvt_info; + + edac_debugfs_remove_recursive(priv->debugfs); + + priv->scrub_enable = 0; + cancel_delayed_work_sync(&(priv->i5100_scrubbing)); + + pci_disable_device(pdev); + pci_disable_device(priv->ch0mm); + pci_disable_device(priv->ch1mm); + pci_disable_device(priv->einj); + pci_dev_put(priv->ch0mm); + pci_dev_put(priv->ch1mm); + pci_dev_put(priv->einj); + + edac_mc_free(mci); +} + +static const struct pci_device_id i5100_pci_tbl[] = { + /* Device 16, Function 0, Channel 0 Memory Map, Error Flag/Mask, ... */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5100_16) }, + { 0, } +}; +MODULE_DEVICE_TABLE(pci, i5100_pci_tbl); + +static struct pci_driver i5100_driver = { + .name = KBUILD_BASENAME, + .probe = i5100_init_one, + .remove = i5100_remove_one, + .id_table = i5100_pci_tbl, +}; + +static int __init i5100_init(void) +{ + int pci_rc; + + i5100_debugfs = edac_debugfs_create_dir_at("i5100_edac", NULL); + + pci_rc = pci_register_driver(&i5100_driver); + return (pci_rc < 0) ? pci_rc : 0; +} + +static void __exit i5100_exit(void) +{ + edac_debugfs_remove(i5100_debugfs); + + pci_unregister_driver(&i5100_driver); +} + +module_init(i5100_init); +module_exit(i5100_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR + ("Arthur Jones <ajones@riverbed.com>"); +MODULE_DESCRIPTION("MC Driver for Intel I5100 memory controllers"); diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c new file mode 100644 index 000000000..f76624ee8 --- /dev/null +++ b/drivers/edac/i5400_edac.c @@ -0,0 +1,1468 @@ +/* + * Intel 5400 class Memory Controllers kernel module (Seaburg) + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Copyright (c) 2008 by: + * Ben Woodard <woodard@redhat.com> + * Mauro Carvalho Chehab + * + * Red Hat Inc. https://www.redhat.com + * + * Forked and adapted from the i5000_edac driver which was + * written by Douglas Thompson Linux Networx <norsk5@xmission.com> + * + * This module is based on the following document: + * + * Intel 5400 Chipset Memory Controller Hub (MCH) - Datasheet + * http://developer.intel.com/design/chipsets/datashts/313070.htm + * + * This Memory Controller manages DDR2 FB-DIMMs. It has 2 branches, each with + * 2 channels operating in lockstep no-mirror mode. Each channel can have up to + * 4 dimm's, each with up to 8GB. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include <linux/mmzone.h> + +#include "edac_module.h" + +/* + * Alter this version for the I5400 module when modifications are made + */ +#define I5400_REVISION " Ver: 1.0.0" + +#define EDAC_MOD_STR "i5400_edac" + +#define i5400_printk(level, fmt, arg...) \ + edac_printk(level, "i5400", fmt, ##arg) + +#define i5400_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i5400", fmt, ##arg) + +/* Limits for i5400 */ +#define MAX_BRANCHES 2 +#define CHANNELS_PER_BRANCH 2 +#define DIMMS_PER_CHANNEL 4 +#define MAX_CHANNELS (MAX_BRANCHES * CHANNELS_PER_BRANCH) + +/* Device 16, + * Function 0: System Address + * Function 1: Memory Branch Map, Control, Errors Register + * Function 2: FSB Error Registers + * + * All 3 functions of Device 16 (0,1,2) share the SAME DID and + * uses PCI_DEVICE_ID_INTEL_5400_ERR for device 16 (0,1,2), + * PCI_DEVICE_ID_INTEL_5400_FBD0 and PCI_DEVICE_ID_INTEL_5400_FBD1 + * for device 21 (0,1). + */ + + /* OFFSETS for Function 0 */ +#define AMBASE 0x48 /* AMB Mem Mapped Reg Region Base */ +#define MAXCH 0x56 /* Max Channel Number */ +#define MAXDIMMPERCH 0x57 /* Max DIMM PER Channel Number */ + + /* OFFSETS for Function 1 */ +#define TOLM 0x6C +#define REDMEMB 0x7C +#define REC_ECC_LOCATOR_ODD(x) ((x) & 0x3fe00) /* bits [17:9] indicate ODD, [8:0] indicate EVEN */ +#define MIR0 0x80 +#define MIR1 0x84 +#define AMIR0 0x8c +#define AMIR1 0x90 + + /* Fatal error registers */ +#define FERR_FAT_FBD 0x98 /* also called as FERR_FAT_FB_DIMM at datasheet */ +#define FERR_FAT_FBDCHAN (3<<28) /* channel index where the highest-order error occurred */ + +#define NERR_FAT_FBD 0x9c +#define FERR_NF_FBD 0xa0 /* also called as FERR_NFAT_FB_DIMM at datasheet */ + + /* Non-fatal error register */ +#define NERR_NF_FBD 0xa4 + + /* Enable error mask */ +#define EMASK_FBD 0xa8 + +#define ERR0_FBD 0xac +#define ERR1_FBD 0xb0 +#define ERR2_FBD 0xb4 +#define MCERR_FBD 0xb8 + + /* No OFFSETS for Device 16 Function 2 */ + +/* + * Device 21, + * Function 0: Memory Map Branch 0 + * + * Device 22, + * Function 0: Memory Map Branch 1 + */ + + /* OFFSETS for Function 0 */ +#define AMBPRESENT_0 0x64 +#define AMBPRESENT_1 0x66 +#define MTR0 0x80 +#define MTR1 0x82 +#define MTR2 0x84 +#define MTR3 0x86 + + /* OFFSETS for Function 1 */ +#define NRECFGLOG 0x74 +#define RECFGLOG 0x78 +#define NRECMEMA 0xbe +#define NRECMEMB 0xc0 +#define NRECFB_DIMMA 0xc4 +#define NRECFB_DIMMB 0xc8 +#define NRECFB_DIMMC 0xcc +#define NRECFB_DIMMD 0xd0 +#define NRECFB_DIMME 0xd4 +#define NRECFB_DIMMF 0xd8 +#define REDMEMA 0xdC +#define RECMEMA 0xf0 +#define RECMEMB 0xf4 +#define RECFB_DIMMA 0xf8 +#define RECFB_DIMMB 0xec +#define RECFB_DIMMC 0xf0 +#define RECFB_DIMMD 0xf4 +#define RECFB_DIMME 0xf8 +#define RECFB_DIMMF 0xfC + +/* + * Error indicator bits and masks + * Error masks are according with Table 5-17 of i5400 datasheet + */ + +enum error_mask { + EMASK_M1 = 1<<0, /* Memory Write error on non-redundant retry */ + EMASK_M2 = 1<<1, /* Memory or FB-DIMM configuration CRC read error */ + EMASK_M3 = 1<<2, /* Reserved */ + EMASK_M4 = 1<<3, /* Uncorrectable Data ECC on Replay */ + EMASK_M5 = 1<<4, /* Aliased Uncorrectable Non-Mirrored Demand Data ECC */ + EMASK_M6 = 1<<5, /* Unsupported on i5400 */ + EMASK_M7 = 1<<6, /* Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */ + EMASK_M8 = 1<<7, /* Aliased Uncorrectable Patrol Data ECC */ + EMASK_M9 = 1<<8, /* Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC */ + EMASK_M10 = 1<<9, /* Unsupported on i5400 */ + EMASK_M11 = 1<<10, /* Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */ + EMASK_M12 = 1<<11, /* Non-Aliased Uncorrectable Patrol Data ECC */ + EMASK_M13 = 1<<12, /* Memory Write error on first attempt */ + EMASK_M14 = 1<<13, /* FB-DIMM Configuration Write error on first attempt */ + EMASK_M15 = 1<<14, /* Memory or FB-DIMM configuration CRC read error */ + EMASK_M16 = 1<<15, /* Channel Failed-Over Occurred */ + EMASK_M17 = 1<<16, /* Correctable Non-Mirrored Demand Data ECC */ + EMASK_M18 = 1<<17, /* Unsupported on i5400 */ + EMASK_M19 = 1<<18, /* Correctable Resilver- or Spare-Copy Data ECC */ + EMASK_M20 = 1<<19, /* Correctable Patrol Data ECC */ + EMASK_M21 = 1<<20, /* FB-DIMM Northbound parity error on FB-DIMM Sync Status */ + EMASK_M22 = 1<<21, /* SPD protocol Error */ + EMASK_M23 = 1<<22, /* Non-Redundant Fast Reset Timeout */ + EMASK_M24 = 1<<23, /* Refresh error */ + EMASK_M25 = 1<<24, /* Memory Write error on redundant retry */ + EMASK_M26 = 1<<25, /* Redundant Fast Reset Timeout */ + EMASK_M27 = 1<<26, /* Correctable Counter Threshold Exceeded */ + EMASK_M28 = 1<<27, /* DIMM-Spare Copy Completed */ + EMASK_M29 = 1<<28, /* DIMM-Isolation Completed */ +}; + +/* + * Names to translate bit error into something useful + */ +static const char *error_name[] = { + [0] = "Memory Write error on non-redundant retry", + [1] = "Memory or FB-DIMM configuration CRC read error", + /* Reserved */ + [3] = "Uncorrectable Data ECC on Replay", + [4] = "Aliased Uncorrectable Non-Mirrored Demand Data ECC", + /* M6 Unsupported on i5400 */ + [6] = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", + [7] = "Aliased Uncorrectable Patrol Data ECC", + [8] = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC", + /* M10 Unsupported on i5400 */ + [10] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", + [11] = "Non-Aliased Uncorrectable Patrol Data ECC", + [12] = "Memory Write error on first attempt", + [13] = "FB-DIMM Configuration Write error on first attempt", + [14] = "Memory or FB-DIMM configuration CRC read error", + [15] = "Channel Failed-Over Occurred", + [16] = "Correctable Non-Mirrored Demand Data ECC", + /* M18 Unsupported on i5400 */ + [18] = "Correctable Resilver- or Spare-Copy Data ECC", + [19] = "Correctable Patrol Data ECC", + [20] = "FB-DIMM Northbound parity error on FB-DIMM Sync Status", + [21] = "SPD protocol Error", + [22] = "Non-Redundant Fast Reset Timeout", + [23] = "Refresh error", + [24] = "Memory Write error on redundant retry", + [25] = "Redundant Fast Reset Timeout", + [26] = "Correctable Counter Threshold Exceeded", + [27] = "DIMM-Spare Copy Completed", + [28] = "DIMM-Isolation Completed", +}; + +/* Fatal errors */ +#define ERROR_FAT_MASK (EMASK_M1 | \ + EMASK_M2 | \ + EMASK_M23) + +/* Correctable errors */ +#define ERROR_NF_CORRECTABLE (EMASK_M27 | \ + EMASK_M20 | \ + EMASK_M19 | \ + EMASK_M18 | \ + EMASK_M17 | \ + EMASK_M16) +#define ERROR_NF_DIMM_SPARE (EMASK_M29 | \ + EMASK_M28) +#define ERROR_NF_SPD_PROTOCOL (EMASK_M22) +#define ERROR_NF_NORTH_CRC (EMASK_M21) + +/* Recoverable errors */ +#define ERROR_NF_RECOVERABLE (EMASK_M26 | \ + EMASK_M25 | \ + EMASK_M24 | \ + EMASK_M15 | \ + EMASK_M14 | \ + EMASK_M13 | \ + EMASK_M12 | \ + EMASK_M11 | \ + EMASK_M9 | \ + EMASK_M8 | \ + EMASK_M7 | \ + EMASK_M5) + +/* uncorrectable errors */ +#define ERROR_NF_UNCORRECTABLE (EMASK_M4) + +/* mask to all non-fatal errors */ +#define ERROR_NF_MASK (ERROR_NF_CORRECTABLE | \ + ERROR_NF_UNCORRECTABLE | \ + ERROR_NF_RECOVERABLE | \ + ERROR_NF_DIMM_SPARE | \ + ERROR_NF_SPD_PROTOCOL | \ + ERROR_NF_NORTH_CRC) + +/* + * Define error masks for the several registers + */ + +/* Enable all fatal and non fatal errors */ +#define ENABLE_EMASK_ALL (ERROR_FAT_MASK | ERROR_NF_MASK) + +/* mask for fatal error registers */ +#define FERR_FAT_MASK ERROR_FAT_MASK + +/* masks for non-fatal error register */ +static inline int to_nf_mask(unsigned int mask) +{ + return (mask & EMASK_M29) | (mask >> 3); +}; + +static inline int from_nf_ferr(unsigned int mask) +{ + return (mask & EMASK_M29) | /* Bit 28 */ + (mask & ((1 << 28) - 1) << 3); /* Bits 0 to 27 */ +}; + +#define FERR_NF_MASK to_nf_mask(ERROR_NF_MASK) +#define FERR_NF_CORRECTABLE to_nf_mask(ERROR_NF_CORRECTABLE) +#define FERR_NF_DIMM_SPARE to_nf_mask(ERROR_NF_DIMM_SPARE) +#define FERR_NF_SPD_PROTOCOL to_nf_mask(ERROR_NF_SPD_PROTOCOL) +#define FERR_NF_NORTH_CRC to_nf_mask(ERROR_NF_NORTH_CRC) +#define FERR_NF_RECOVERABLE to_nf_mask(ERROR_NF_RECOVERABLE) +#define FERR_NF_UNCORRECTABLE to_nf_mask(ERROR_NF_UNCORRECTABLE) + +/* Defines to extract the vaious fields from the + * MTRx - Memory Technology Registers + */ +#define MTR_DIMMS_PRESENT(mtr) ((mtr) & (1 << 10)) +#define MTR_DIMMS_ETHROTTLE(mtr) ((mtr) & (1 << 9)) +#define MTR_DRAM_WIDTH(mtr) (((mtr) & (1 << 8)) ? 8 : 4) +#define MTR_DRAM_BANKS(mtr) (((mtr) & (1 << 6)) ? 8 : 4) +#define MTR_DRAM_BANKS_ADDR_BITS(mtr) ((MTR_DRAM_BANKS(mtr) == 8) ? 3 : 2) +#define MTR_DIMM_RANK(mtr) (((mtr) >> 5) & 0x1) +#define MTR_DIMM_RANK_ADDR_BITS(mtr) (MTR_DIMM_RANK(mtr) ? 2 : 1) +#define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3) +#define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13) +#define MTR_DIMM_COLS(mtr) ((mtr) & 0x3) +#define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10) + +/* This applies to FERR_NF_FB-DIMM as well as FERR_FAT_FB-DIMM */ +static inline int extract_fbdchan_indx(u32 x) +{ + return (x>>28) & 0x3; +} + +/* Device name and register DID (Device ID) */ +struct i5400_dev_info { + const char *ctl_name; /* name for this device */ + u16 fsb_mapping_errors; /* DID for the branchmap,control */ +}; + +/* Table of devices attributes supported by this driver */ +static const struct i5400_dev_info i5400_devs[] = { + { + .ctl_name = "I5400", + .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_5400_ERR, + }, +}; + +struct i5400_dimm_info { + int megabytes; /* size, 0 means not present */ +}; + +/* driver private data structure */ +struct i5400_pvt { + struct pci_dev *system_address; /* 16.0 */ + struct pci_dev *branchmap_werrors; /* 16.1 */ + struct pci_dev *fsb_error_regs; /* 16.2 */ + struct pci_dev *branch_0; /* 21.0 */ + struct pci_dev *branch_1; /* 22.0 */ + + u16 tolm; /* top of low memory */ + union { + u64 ambase; /* AMB BAR */ + struct { + u32 ambase_bottom; + u32 ambase_top; + } u __packed; + }; + + u16 mir0, mir1; + + u16 b0_mtr[DIMMS_PER_CHANNEL]; /* Memory Technlogy Reg */ + u16 b0_ambpresent0; /* Branch 0, Channel 0 */ + u16 b0_ambpresent1; /* Brnach 0, Channel 1 */ + + u16 b1_mtr[DIMMS_PER_CHANNEL]; /* Memory Technlogy Reg */ + u16 b1_ambpresent0; /* Branch 1, Channel 8 */ + u16 b1_ambpresent1; /* Branch 1, Channel 1 */ + + /* DIMM information matrix, allocating architecture maximums */ + struct i5400_dimm_info dimm_info[DIMMS_PER_CHANNEL][MAX_CHANNELS]; + + /* Actual values for this controller */ + int maxch; /* Max channels */ + int maxdimmperch; /* Max DIMMs per channel */ +}; + +/* I5400 MCH error information retrieved from Hardware */ +struct i5400_error_info { + /* These registers are always read from the MC */ + u32 ferr_fat_fbd; /* First Errors Fatal */ + u32 nerr_fat_fbd; /* Next Errors Fatal */ + u32 ferr_nf_fbd; /* First Errors Non-Fatal */ + u32 nerr_nf_fbd; /* Next Errors Non-Fatal */ + + /* These registers are input ONLY if there was a Recoverable Error */ + u32 redmemb; /* Recoverable Mem Data Error log B */ + u16 recmema; /* Recoverable Mem Error log A */ + u32 recmemb; /* Recoverable Mem Error log B */ + + /* These registers are input ONLY if there was a Non-Rec Error */ + u16 nrecmema; /* Non-Recoverable Mem log A */ + u32 nrecmemb; /* Non-Recoverable Mem log B */ + +}; + +/* note that nrec_rdwr changed from NRECMEMA to NRECMEMB between the 5000 and + 5400 better to use an inline function than a macro in this case */ +static inline int nrec_bank(struct i5400_error_info *info) +{ + return ((info->nrecmema) >> 12) & 0x7; +} +static inline int nrec_rank(struct i5400_error_info *info) +{ + return ((info->nrecmema) >> 8) & 0xf; +} +static inline int nrec_buf_id(struct i5400_error_info *info) +{ + return ((info->nrecmema)) & 0xff; +} +static inline int nrec_rdwr(struct i5400_error_info *info) +{ + return (info->nrecmemb) >> 31; +} +/* This applies to both NREC and REC string so it can be used with nrec_rdwr + and rec_rdwr */ +static inline const char *rdwr_str(int rdwr) +{ + return rdwr ? "Write" : "Read"; +} +static inline int nrec_cas(struct i5400_error_info *info) +{ + return ((info->nrecmemb) >> 16) & 0x1fff; +} +static inline int nrec_ras(struct i5400_error_info *info) +{ + return (info->nrecmemb) & 0xffff; +} +static inline int rec_bank(struct i5400_error_info *info) +{ + return ((info->recmema) >> 12) & 0x7; +} +static inline int rec_rank(struct i5400_error_info *info) +{ + return ((info->recmema) >> 8) & 0xf; +} +static inline int rec_rdwr(struct i5400_error_info *info) +{ + return (info->recmemb) >> 31; +} +static inline int rec_cas(struct i5400_error_info *info) +{ + return ((info->recmemb) >> 16) & 0x1fff; +} +static inline int rec_ras(struct i5400_error_info *info) +{ + return (info->recmemb) & 0xffff; +} + +static struct edac_pci_ctl_info *i5400_pci; + +/* + * i5400_get_error_info Retrieve the hardware error information from + * the hardware and cache it in the 'info' + * structure + */ +static void i5400_get_error_info(struct mem_ctl_info *mci, + struct i5400_error_info *info) +{ + struct i5400_pvt *pvt; + u32 value; + + pvt = mci->pvt_info; + + /* read in the 1st FATAL error register */ + pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value); + + /* Mask only the bits that the doc says are valid + */ + value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK); + + /* If there is an error, then read in the + NEXT FATAL error register and the Memory Error Log Register A + */ + if (value & FERR_FAT_MASK) { + info->ferr_fat_fbd = value; + + /* harvest the various error data we need */ + pci_read_config_dword(pvt->branchmap_werrors, + NERR_FAT_FBD, &info->nerr_fat_fbd); + pci_read_config_word(pvt->branchmap_werrors, + NRECMEMA, &info->nrecmema); + pci_read_config_dword(pvt->branchmap_werrors, + NRECMEMB, &info->nrecmemb); + + /* Clear the error bits, by writing them back */ + pci_write_config_dword(pvt->branchmap_werrors, + FERR_FAT_FBD, value); + } else { + info->ferr_fat_fbd = 0; + info->nerr_fat_fbd = 0; + info->nrecmema = 0; + info->nrecmemb = 0; + } + + /* read in the 1st NON-FATAL error register */ + pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value); + + /* If there is an error, then read in the 1st NON-FATAL error + * register as well */ + if (value & FERR_NF_MASK) { + info->ferr_nf_fbd = value; + + /* harvest the various error data we need */ + pci_read_config_dword(pvt->branchmap_werrors, + NERR_NF_FBD, &info->nerr_nf_fbd); + pci_read_config_word(pvt->branchmap_werrors, + RECMEMA, &info->recmema); + pci_read_config_dword(pvt->branchmap_werrors, + RECMEMB, &info->recmemb); + pci_read_config_dword(pvt->branchmap_werrors, + REDMEMB, &info->redmemb); + + /* Clear the error bits, by writing them back */ + pci_write_config_dword(pvt->branchmap_werrors, + FERR_NF_FBD, value); + } else { + info->ferr_nf_fbd = 0; + info->nerr_nf_fbd = 0; + info->recmema = 0; + info->recmemb = 0; + info->redmemb = 0; + } +} + +/* + * i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci, + * struct i5400_error_info *info, + * int handle_errors); + * + * handle the Intel FATAL and unrecoverable errors, if any + */ +static void i5400_proccess_non_recoverable_info(struct mem_ctl_info *mci, + struct i5400_error_info *info, + unsigned long allErrors) +{ + char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80]; + int branch; + int channel; + int bank; + int buf_id; + int rank; + int rdwr; + int ras, cas; + int errnum; + char *type = NULL; + enum hw_event_mc_err_type tp_event = HW_EVENT_ERR_UNCORRECTED; + + if (!allErrors) + return; /* if no error, return now */ + + if (allErrors & ERROR_FAT_MASK) { + type = "FATAL"; + tp_event = HW_EVENT_ERR_FATAL; + } else if (allErrors & FERR_NF_UNCORRECTABLE) + type = "NON-FATAL uncorrected"; + else + type = "NON-FATAL recoverable"; + + /* ONLY ONE of the possible error bits will be set, as per the docs */ + + branch = extract_fbdchan_indx(info->ferr_fat_fbd); + channel = branch; + + /* Use the NON-Recoverable macros to extract data */ + bank = nrec_bank(info); + rank = nrec_rank(info); + buf_id = nrec_buf_id(info); + rdwr = nrec_rdwr(info); + ras = nrec_ras(info); + cas = nrec_cas(info); + + edac_dbg(0, "\t\t%s DIMM= %d Channels= %d,%d (Branch= %d DRAM Bank= %d Buffer ID = %d rdwr= %s ras= %d cas= %d)\n", + type, rank, channel, channel + 1, branch >> 1, bank, + buf_id, rdwr_str(rdwr), ras, cas); + + /* Only 1 bit will be on */ + errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Bank=%d Buffer ID = %d RAS=%d CAS=%d Err=0x%lx (%s)", + bank, buf_id, ras, cas, allErrors, error_name[errnum]); + + edac_mc_handle_error(tp_event, mci, 1, 0, 0, 0, + branch >> 1, -1, rank, + rdwr ? "Write error" : "Read error", + msg); +} + +/* + * i5400_process_fatal_error_info(struct mem_ctl_info *mci, + * struct i5400_error_info *info, + * int handle_errors); + * + * handle the Intel NON-FATAL errors, if any + */ +static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci, + struct i5400_error_info *info) +{ + char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80]; + unsigned long allErrors; + int branch; + int channel; + int bank; + int rank; + int rdwr; + int ras, cas; + int errnum; + + /* mask off the Error bits that are possible */ + allErrors = from_nf_ferr(info->ferr_nf_fbd & FERR_NF_MASK); + if (!allErrors) + return; /* if no error, return now */ + + /* ONLY ONE of the possible error bits will be set, as per the docs */ + + if (allErrors & (ERROR_NF_UNCORRECTABLE | ERROR_NF_RECOVERABLE)) { + i5400_proccess_non_recoverable_info(mci, info, allErrors); + return; + } + + /* Correctable errors */ + if (allErrors & ERROR_NF_CORRECTABLE) { + edac_dbg(0, "\tCorrected bits= 0x%lx\n", allErrors); + + branch = extract_fbdchan_indx(info->ferr_nf_fbd); + + channel = 0; + if (REC_ECC_LOCATOR_ODD(info->redmemb)) + channel = 1; + + /* Convert channel to be based from zero, instead of + * from branch base of 0 */ + channel += branch; + + bank = rec_bank(info); + rank = rec_rank(info); + rdwr = rec_rdwr(info); + ras = rec_ras(info); + cas = rec_cas(info); + + /* Only 1 bit will be on */ + errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); + + edac_dbg(0, "\t\tDIMM= %d Channel= %d (Branch %d DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n", + rank, channel, branch >> 1, bank, + rdwr_str(rdwr), ras, cas); + + /* Form out message */ + snprintf(msg, sizeof(msg), + "Corrected error (Branch=%d DRAM-Bank=%d RDWR=%s " + "RAS=%d CAS=%d, CE Err=0x%lx (%s))", + branch >> 1, bank, rdwr_str(rdwr), ras, cas, + allErrors, error_name[errnum]); + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, + branch >> 1, channel % 2, rank, + rdwr ? "Write error" : "Read error", + msg); + + return; + } + + /* Miscellaneous errors */ + errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name)); + + branch = extract_fbdchan_indx(info->ferr_nf_fbd); + + i5400_mc_printk(mci, KERN_EMERG, + "Non-Fatal misc error (Branch=%d Err=%#lx (%s))", + branch >> 1, allErrors, error_name[errnum]); +} + +/* + * i5400_process_error_info Process the error info that is + * in the 'info' structure, previously retrieved from hardware + */ +static void i5400_process_error_info(struct mem_ctl_info *mci, + struct i5400_error_info *info) +{ u32 allErrors; + + /* First handle any fatal errors that occurred */ + allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK); + i5400_proccess_non_recoverable_info(mci, info, allErrors); + + /* now handle any non-fatal errors that occurred */ + i5400_process_nonfatal_error_info(mci, info); +} + +/* + * i5400_clear_error Retrieve any error from the hardware + * but do NOT process that error. + * Used for 'clearing' out of previous errors + * Called by the Core module. + */ +static void i5400_clear_error(struct mem_ctl_info *mci) +{ + struct i5400_error_info info; + + i5400_get_error_info(mci, &info); +} + +/* + * i5400_check_error Retrieve and process errors reported by the + * hardware. Called by the Core module. + */ +static void i5400_check_error(struct mem_ctl_info *mci) +{ + struct i5400_error_info info; + + i5400_get_error_info(mci, &info); + i5400_process_error_info(mci, &info); +} + +/* + * i5400_put_devices 'put' all the devices that we have + * reserved via 'get' + */ +static void i5400_put_devices(struct mem_ctl_info *mci) +{ + struct i5400_pvt *pvt; + + pvt = mci->pvt_info; + + /* Decrement usage count for devices */ + pci_dev_put(pvt->branch_1); + pci_dev_put(pvt->branch_0); + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branchmap_werrors); +} + +/* + * i5400_get_devices Find and perform 'get' operation on the MCH's + * device/functions we want to reference for this driver + * + * Need to 'get' device 16 func 1 and func 2 + */ +static int i5400_get_devices(struct mem_ctl_info *mci, int dev_idx) +{ + struct i5400_pvt *pvt; + struct pci_dev *pdev; + + pvt = mci->pvt_info; + pvt->branchmap_werrors = NULL; + pvt->fsb_error_regs = NULL; + pvt->branch_0 = NULL; + pvt->branch_1 = NULL; + + /* Attempt to 'get' the MCH register we want */ + pdev = NULL; + while (1) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR, pdev); + if (!pdev) { + /* End of list, leave */ + i5400_printk(KERN_ERR, + "'system address,Process Bus' " + "device not found:" + "vendor 0x%x device 0x%x ERR func 1 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR); + return -ENODEV; + } + + /* Store device 16 func 1 */ + if (PCI_FUNC(pdev->devfn) == 1) + break; + } + pvt->branchmap_werrors = pdev; + + pdev = NULL; + while (1) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR, pdev); + if (!pdev) { + /* End of list, leave */ + i5400_printk(KERN_ERR, + "'system address,Process Bus' " + "device not found:" + "vendor 0x%x device 0x%x ERR func 2 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_ERR); + + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; + } + + /* Store device 16 func 2 */ + if (PCI_FUNC(pdev->devfn) == 2) + break; + } + pvt->fsb_error_regs = pdev; + + edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s %x:%x\n", + pci_name(pvt->system_address), + pvt->system_address->vendor, pvt->system_address->device); + edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->branchmap_werrors), + pvt->branchmap_werrors->vendor, + pvt->branchmap_werrors->device); + edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->fsb_error_regs), + pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device); + + pvt->branch_0 = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_FBD0, NULL); + if (!pvt->branch_0) { + i5400_printk(KERN_ERR, + "MC: 'BRANCH 0' device not found:" + "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_FBD0); + + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; + } + + /* If this device claims to have more than 2 channels then + * fetch Branch 1's information + */ + if (pvt->maxch < CHANNELS_PER_BRANCH) + return 0; + + pvt->branch_1 = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_FBD1, NULL); + if (!pvt->branch_1) { + i5400_printk(KERN_ERR, + "MC: 'BRANCH 1' device not found:" + "vendor 0x%x device 0x%x Func 0 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5400_FBD1); + + pci_dev_put(pvt->branch_0); + pci_dev_put(pvt->fsb_error_regs); + pci_dev_put(pvt->branchmap_werrors); + return -ENODEV; + } + + return 0; +} + +/* + * determine_amb_present + * + * the information is contained in DIMMS_PER_CHANNEL different + * registers determining which of the DIMMS_PER_CHANNEL requires + * knowing which channel is in question + * + * 2 branches, each with 2 channels + * b0_ambpresent0 for channel '0' + * b0_ambpresent1 for channel '1' + * b1_ambpresent0 for channel '2' + * b1_ambpresent1 for channel '3' + */ +static int determine_amb_present_reg(struct i5400_pvt *pvt, int channel) +{ + int amb_present; + + if (channel < CHANNELS_PER_BRANCH) { + if (channel & 0x1) + amb_present = pvt->b0_ambpresent1; + else + amb_present = pvt->b0_ambpresent0; + } else { + if (channel & 0x1) + amb_present = pvt->b1_ambpresent1; + else + amb_present = pvt->b1_ambpresent0; + } + + return amb_present; +} + +/* + * determine_mtr(pvt, dimm, channel) + * + * return the proper MTR register as determine by the dimm and desired channel + */ +static int determine_mtr(struct i5400_pvt *pvt, int dimm, int channel) +{ + int mtr; + int n; + + /* There is one MTR for each slot pair of FB-DIMMs, + Each slot pair may be at branch 0 or branch 1. + */ + n = dimm; + + if (n >= DIMMS_PER_CHANNEL) { + edac_dbg(0, "ERROR: trying to access an invalid dimm: %d\n", + dimm); + return 0; + } + + if (channel < CHANNELS_PER_BRANCH) + mtr = pvt->b0_mtr[n]; + else + mtr = pvt->b1_mtr[n]; + + return mtr; +} + +/* + */ +static void decode_mtr(int slot_row, u16 mtr) +{ + int ans; + + ans = MTR_DIMMS_PRESENT(mtr); + + edac_dbg(2, "\tMTR%d=0x%x: DIMMs are %sPresent\n", + slot_row, mtr, ans ? "" : "NOT "); + if (!ans) + return; + + edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr)); + + edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n", + MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled"); + + edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr)); + edac_dbg(2, "\t\tNUMRANK: %s\n", + MTR_DIMM_RANK(mtr) ? "double" : "single"); + edac_dbg(2, "\t\tNUMROW: %s\n", + MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" : + MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" : + MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" : + "65,536 - 16 rows"); + edac_dbg(2, "\t\tNUMCOL: %s\n", + MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" : + MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" : + MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" : + "reserved"); +} + +static void handle_channel(struct i5400_pvt *pvt, int dimm, int channel, + struct i5400_dimm_info *dinfo) +{ + int mtr; + int amb_present_reg; + int addrBits; + + mtr = determine_mtr(pvt, dimm, channel); + if (MTR_DIMMS_PRESENT(mtr)) { + amb_present_reg = determine_amb_present_reg(pvt, channel); + + /* Determine if there is a DIMM present in this DIMM slot */ + if (amb_present_reg & (1 << dimm)) { + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); + /* Add thenumber of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* add the number of RANK bits */ + addrBits += MTR_DIMM_RANK(mtr); + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; + } + } +} + +/* + * calculate_dimm_size + * + * also will output a DIMM matrix map, if debug is enabled, for viewing + * how the DIMMs are populated + */ +static void calculate_dimm_size(struct i5400_pvt *pvt) +{ + struct i5400_dimm_info *dinfo; + int dimm, max_dimms; + char *p, *mem_buffer; + int space, n; + int channel, branch; + + /* ================= Generate some debug output ================= */ + space = PAGE_SIZE; + mem_buffer = p = kmalloc(space, GFP_KERNEL); + if (p == NULL) { + i5400_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n", + __FILE__, __func__); + return; + } + + /* Scan all the actual DIMMS + * and calculate the information for each DIMM + * Start with the highest dimm first, to display it first + * and work toward the 0th dimm + */ + max_dimms = pvt->maxdimmperch; + for (dimm = max_dimms - 1; dimm >= 0; dimm--) { + + /* on an odd dimm, first output a 'boundary' marker, + * then reset the message buffer */ + if (dimm & 0x1) { + n = snprintf(p, space, "---------------------------" + "-------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + } + n = snprintf(p, space, "dimm %2d ", dimm); + p += n; + space -= n; + + for (channel = 0; channel < pvt->maxch; channel++) { + dinfo = &pvt->dimm_info[dimm][channel]; + handle_channel(pvt, dimm, channel, dinfo); + n = snprintf(p, space, "%4d MB | ", dinfo->megabytes); + p += n; + space -= n; + } + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + } + + /* Output the last bottom 'boundary' marker */ + n = snprintf(p, space, "---------------------------" + "-------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + + /* now output the 'channel' labels */ + n = snprintf(p, space, " "); + p += n; + space -= n; + for (channel = 0; channel < pvt->maxch; channel++) { + n = snprintf(p, space, "channel %d | ", channel); + p += n; + space -= n; + } + + space -= n; + edac_dbg(2, "%s\n", mem_buffer); + p = mem_buffer; + space = PAGE_SIZE; + + n = snprintf(p, space, " "); + p += n; + for (branch = 0; branch < MAX_BRANCHES; branch++) { + n = snprintf(p, space, " branch %d | ", branch); + p += n; + space -= n; + } + + /* output the last message and free buffer */ + edac_dbg(2, "%s\n", mem_buffer); + kfree(mem_buffer); +} + +/* + * i5400_get_mc_regs read in the necessary registers and + * cache locally + * + * Fills in the private data members + */ +static void i5400_get_mc_regs(struct mem_ctl_info *mci) +{ + struct i5400_pvt *pvt; + u32 actual_tolm; + u16 limit; + int slot_row; + int way0, way1; + + pvt = mci->pvt_info; + + pci_read_config_dword(pvt->system_address, AMBASE, + &pvt->u.ambase_bottom); + pci_read_config_dword(pvt->system_address, AMBASE + sizeof(u32), + &pvt->u.ambase_top); + + edac_dbg(2, "AMBASE= 0x%lx MAXCH= %d MAX-DIMM-Per-CH= %d\n", + (long unsigned int)pvt->ambase, pvt->maxch, pvt->maxdimmperch); + + /* Get the Branch Map regs */ + pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm); + pvt->tolm >>= 12; + edac_dbg(2, "\nTOLM (number of 256M regions) =%u (0x%x)\n", + pvt->tolm, pvt->tolm); + + actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28)); + edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n", + actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28); + + pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir0); + pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir1); + + /* Get the MIR[0-1] regs */ + limit = (pvt->mir0 >> 4) & 0x0fff; + way0 = pvt->mir0 & 0x1; + way1 = pvt->mir0 & 0x2; + edac_dbg(2, "MIR0: limit= 0x%x WAY1= %u WAY0= %x\n", + limit, way1, way0); + limit = (pvt->mir1 >> 4) & 0xfff; + way0 = pvt->mir1 & 0x1; + way1 = pvt->mir1 & 0x2; + edac_dbg(2, "MIR1: limit= 0x%x WAY1= %u WAY0= %x\n", + limit, way1, way0); + + /* Get the set of MTR[0-3] regs by each branch */ + for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) { + int where = MTR0 + (slot_row * sizeof(u16)); + + /* Branch 0 set of MTR registers */ + pci_read_config_word(pvt->branch_0, where, + &pvt->b0_mtr[slot_row]); + + edac_dbg(2, "MTR%d where=0x%x B0 value=0x%x\n", + slot_row, where, pvt->b0_mtr[slot_row]); + + if (pvt->maxch < CHANNELS_PER_BRANCH) { + pvt->b1_mtr[slot_row] = 0; + continue; + } + + /* Branch 1 set of MTR registers */ + pci_read_config_word(pvt->branch_1, where, + &pvt->b1_mtr[slot_row]); + edac_dbg(2, "MTR%d where=0x%x B1 value=0x%x\n", + slot_row, where, pvt->b1_mtr[slot_row]); + } + + /* Read and dump branch 0's MTRs */ + edac_dbg(2, "Memory Technology Registers:\n"); + edac_dbg(2, " Branch 0:\n"); + for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) + decode_mtr(slot_row, pvt->b0_mtr[slot_row]); + + pci_read_config_word(pvt->branch_0, AMBPRESENT_0, + &pvt->b0_ambpresent0); + edac_dbg(2, "\t\tAMB-Branch 0-present0 0x%x:\n", pvt->b0_ambpresent0); + pci_read_config_word(pvt->branch_0, AMBPRESENT_1, + &pvt->b0_ambpresent1); + edac_dbg(2, "\t\tAMB-Branch 0-present1 0x%x:\n", pvt->b0_ambpresent1); + + /* Only if we have 2 branchs (4 channels) */ + if (pvt->maxch < CHANNELS_PER_BRANCH) { + pvt->b1_ambpresent0 = 0; + pvt->b1_ambpresent1 = 0; + } else { + /* Read and dump branch 1's MTRs */ + edac_dbg(2, " Branch 1:\n"); + for (slot_row = 0; slot_row < DIMMS_PER_CHANNEL; slot_row++) + decode_mtr(slot_row, pvt->b1_mtr[slot_row]); + + pci_read_config_word(pvt->branch_1, AMBPRESENT_0, + &pvt->b1_ambpresent0); + edac_dbg(2, "\t\tAMB-Branch 1-present0 0x%x:\n", + pvt->b1_ambpresent0); + pci_read_config_word(pvt->branch_1, AMBPRESENT_1, + &pvt->b1_ambpresent1); + edac_dbg(2, "\t\tAMB-Branch 1-present1 0x%x:\n", + pvt->b1_ambpresent1); + } + + /* Go and determine the size of each DIMM and place in an + * orderly matrix */ + calculate_dimm_size(pvt); +} + +/* + * i5400_init_dimms Initialize the 'dimms' table within + * the mci control structure with the + * addressing of memory. + * + * return: + * 0 success + * 1 no actual memory found on this MC + */ +static int i5400_init_dimms(struct mem_ctl_info *mci) +{ + struct i5400_pvt *pvt; + struct dimm_info *dimm; + int ndimms; + int mtr; + int size_mb; + int channel, slot; + + pvt = mci->pvt_info; + + ndimms = 0; + + /* + * FIXME: remove pvt->dimm_info[slot][channel] and use the 3 + * layers here. + */ + for (channel = 0; channel < mci->layers[0].size * mci->layers[1].size; + channel++) { + for (slot = 0; slot < mci->layers[2].size; slot++) { + mtr = determine_mtr(pvt, slot, channel); + + /* if no DIMMS on this slot, continue */ + if (!MTR_DIMMS_PRESENT(mtr)) + continue; + + dimm = edac_get_dimm(mci, channel / 2, channel % 2, slot); + + size_mb = pvt->dimm_info[slot][channel].megabytes; + + edac_dbg(2, "dimm (branch %d channel %d slot %d): %d.%03d GB\n", + channel / 2, channel % 2, slot, + size_mb / 1000, size_mb % 1000); + + dimm->nr_pages = size_mb << 8; + dimm->grain = 8; + dimm->dtype = MTR_DRAM_WIDTH(mtr) == 8 ? + DEV_X8 : DEV_X4; + dimm->mtype = MEM_FB_DDR2; + /* + * The eccc mechanism is SDDC (aka SECC), with + * is similar to Chipkill. + */ + dimm->edac_mode = MTR_DRAM_WIDTH(mtr) == 8 ? + EDAC_S8ECD8ED : EDAC_S4ECD4ED; + ndimms++; + } + } + + /* + * When just one memory is provided, it should be at location (0,0,0). + * With such single-DIMM mode, the SDCC algorithm degrades to SECDEC+. + */ + if (ndimms == 1) + mci->dimms[0]->edac_mode = EDAC_SECDED; + + return (ndimms == 0); +} + +/* + * i5400_enable_error_reporting + * Turn on the memory reporting features of the hardware + */ +static void i5400_enable_error_reporting(struct mem_ctl_info *mci) +{ + struct i5400_pvt *pvt; + u32 fbd_error_mask; + + pvt = mci->pvt_info; + + /* Read the FBD Error Mask Register */ + pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD, + &fbd_error_mask); + + /* Enable with a '0' */ + fbd_error_mask &= ~(ENABLE_EMASK_ALL); + + pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD, + fbd_error_mask); +} + +/* + * i5400_probe1 Probe for ONE instance of device to see if it is + * present. + * return: + * 0 for FOUND a device + * < 0 for error code + */ +static int i5400_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct i5400_pvt *pvt; + struct edac_mc_layer layers[3]; + + if (dev_idx >= ARRAY_SIZE(i5400_devs)) + return -EINVAL; + + edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* We only are looking for func 0 of the set */ + if (PCI_FUNC(pdev->devfn) != 0) + return -ENODEV; + + /* + * allocate a new MC control structure + * + * This drivers uses the DIMM slot as "csrow" and the rest as "channel". + */ + layers[0].type = EDAC_MC_LAYER_BRANCH; + layers[0].size = MAX_BRANCHES; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = CHANNELS_PER_BRANCH; + layers[1].is_virt_csrow = false; + layers[2].type = EDAC_MC_LAYER_SLOT; + layers[2].size = DIMMS_PER_CHANNEL; + layers[2].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p\n", mci); + + mci->pdev = &pdev->dev; /* record ptr to the generic device */ + + pvt = mci->pvt_info; + pvt->system_address = pdev; /* Record this device in our private */ + pvt->maxch = MAX_CHANNELS; + pvt->maxdimmperch = DIMMS_PER_CHANNEL; + + /* 'get' the pci devices we want to reserve for our use */ + if (i5400_get_devices(mci, dev_idx)) + goto fail0; + + /* Time to get serious */ + i5400_get_mc_regs(mci); /* retrieve the hardware registers */ + + mci->mc_idx = 0; + mci->mtype_cap = MEM_FLAG_FB_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "i5400_edac.c"; + mci->ctl_name = i5400_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + /* Set the function pointer to an actual operation function */ + mci->edac_check = i5400_check_error; + + /* initialize the MC control structure 'dimms' table + * with the mapping and control information */ + if (i5400_init_dimms(mci)) { + edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i5400_init_dimms() returned nonzero value\n"); + mci->edac_cap = EDAC_FLAG_NONE; /* no dimms found */ + } else { + edac_dbg(1, "MC: Enable error reporting now\n"); + i5400_enable_error_reporting(mci); + } + + /* add this new MC control structure to EDAC's list of MCs */ + if (edac_mc_add_mc(mci)) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + /* FIXME: perhaps some code should go here that disables error + * reporting if we just enabled it + */ + goto fail1; + } + + i5400_clear_error(mci); + + /* allocating generic PCI control info */ + i5400_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i5400_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + return 0; + + /* Error exit unwinding stack */ +fail1: + + i5400_put_devices(mci); + +fail0: + edac_mc_free(mci); + return -ENODEV; +} + +/* + * i5400_init_one constructor for one instance of device + * + * returns: + * negative on error + * count (>= 0) + */ +static int i5400_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + /* wake up device */ + rc = pci_enable_device(pdev); + if (rc) + return rc; + + /* now probe and enable the device */ + return i5400_probe1(pdev, id->driver_data); +} + +/* + * i5400_remove_one destructor for one instance of device + * + */ +static void i5400_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (i5400_pci) + edac_pci_release_generic_ctl(i5400_pci); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + /* retrieve references to resources, and free those resources */ + i5400_put_devices(mci); + + pci_disable_device(pdev); + + edac_mc_free(mci); +} + +/* + * pci_device_id table for which devices we are looking for + * + * The "E500P" device is the first device supported. + */ +static const struct pci_device_id i5400_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR)}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i5400_pci_tbl); + +/* + * i5400_driver pci_driver structure for this module + * + */ +static struct pci_driver i5400_driver = { + .name = "i5400_edac", + .probe = i5400_init_one, + .remove = i5400_remove_one, + .id_table = i5400_pci_tbl, +}; + +/* + * i5400_init Module entry function + * Try to initialize this module for its devices + */ +static int __init i5400_init(void) +{ + int pci_rc; + + edac_dbg(2, "MC:\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i5400_driver); + + return (pci_rc < 0) ? pci_rc : 0; +} + +/* + * i5400_exit() Module exit function + * Unregister the driver + */ +static void __exit i5400_exit(void) +{ + edac_dbg(2, "MC:\n"); + pci_unregister_driver(&i5400_driver); +} + +module_init(i5400_init); +module_exit(i5400_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ben Woodard <woodard@redhat.com>"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_AUTHOR("Red Hat Inc. (https://www.redhat.com)"); +MODULE_DESCRIPTION("MC Driver for Intel I5400 memory controllers - " + I5400_REVISION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c new file mode 100644 index 000000000..61adaa872 --- /dev/null +++ b/drivers/edac/i7300_edac.c @@ -0,0 +1,1214 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel 7300 class Memory Controllers kernel module (Clarksboro) + * + * Copyright (c) 2010 by: + * Mauro Carvalho Chehab + * + * Red Hat Inc. https://www.redhat.com + * + * Intel 7300 Chipset Memory Controller Hub (MCH) - Datasheet + * http://www.intel.com/Assets/PDF/datasheet/318082.pdf + * + * TODO: The chipset allow checking for PCI Express errors also. Currently, + * the driver covers only memory error errors + * + * This driver uses "csrows" EDAC attribute to represent DIMM slot# + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/edac.h> +#include <linux/mmzone.h> + +#include "edac_module.h" + +/* + * Alter this version for the I7300 module when modifications are made + */ +#define I7300_REVISION " Ver: 1.0.0" + +#define EDAC_MOD_STR "i7300_edac" + +#define i7300_printk(level, fmt, arg...) \ + edac_printk(level, "i7300", fmt, ##arg) + +#define i7300_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i7300", fmt, ##arg) + +/*********************************************** + * i7300 Limit constants Structs and static vars + ***********************************************/ + +/* + * Memory topology is organized as: + * Branch 0 - 2 channels: channels 0 and 1 (FDB0 PCI dev 21.0) + * Branch 1 - 2 channels: channels 2 and 3 (FDB1 PCI dev 22.0) + * Each channel can have to 8 DIMM sets (called as SLOTS) + * Slots should generally be filled in pairs + * Except on Single Channel mode of operation + * just slot 0/channel0 filled on this mode + * On normal operation mode, the two channels on a branch should be + * filled together for the same SLOT# + * When in mirrored mode, Branch 1 replicate memory at Branch 0, so, the four + * channels on both branches should be filled + */ + +/* Limits for i7300 */ +#define MAX_SLOTS 8 +#define MAX_BRANCHES 2 +#define MAX_CH_PER_BRANCH 2 +#define MAX_CHANNELS (MAX_CH_PER_BRANCH * MAX_BRANCHES) +#define MAX_MIR 3 + +#define to_channel(ch, branch) ((((branch)) << 1) | (ch)) + +#define to_csrow(slot, ch, branch) \ + (to_channel(ch, branch) | ((slot) << 2)) + +/* Device name and register DID (Device ID) */ +struct i7300_dev_info { + const char *ctl_name; /* name for this device */ + u16 fsb_mapping_errors; /* DID for the branchmap,control */ +}; + +/* Table of devices attributes supported by this driver */ +static const struct i7300_dev_info i7300_devs[] = { + { + .ctl_name = "I7300", + .fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, + }, +}; + +struct i7300_dimm_info { + int megabytes; /* size, 0 means not present */ +}; + +/* driver private data structure */ +struct i7300_pvt { + struct pci_dev *pci_dev_16_0_fsb_ctlr; /* 16.0 */ + struct pci_dev *pci_dev_16_1_fsb_addr_map; /* 16.1 */ + struct pci_dev *pci_dev_16_2_fsb_err_regs; /* 16.2 */ + struct pci_dev *pci_dev_2x_0_fbd_branch[MAX_BRANCHES]; /* 21.0 and 22.0 */ + + u16 tolm; /* top of low memory */ + u64 ambase; /* AMB BAR */ + + u32 mc_settings; /* Report several settings */ + u32 mc_settings_a; + + u16 mir[MAX_MIR]; /* Memory Interleave Reg*/ + + u16 mtr[MAX_SLOTS][MAX_BRANCHES]; /* Memory Technlogy Reg */ + u16 ambpresent[MAX_CHANNELS]; /* AMB present regs */ + + /* DIMM information matrix, allocating architecture maximums */ + struct i7300_dimm_info dimm_info[MAX_SLOTS][MAX_CHANNELS]; + + /* Temporary buffer for use when preparing error messages */ + char *tmp_prt_buffer; +}; + +/* FIXME: Why do we need to have this static? */ +static struct edac_pci_ctl_info *i7300_pci; + +/*************************************************** + * i7300 Register definitions for memory enumeration + ***************************************************/ + +/* + * Device 16, + * Function 0: System Address (not documented) + * Function 1: Memory Branch Map, Control, Errors Register + */ + + /* OFFSETS for Function 0 */ +#define AMBASE 0x48 /* AMB Mem Mapped Reg Region Base */ +#define MAXCH 0x56 /* Max Channel Number */ +#define MAXDIMMPERCH 0x57 /* Max DIMM PER Channel Number */ + + /* OFFSETS for Function 1 */ +#define MC_SETTINGS 0x40 + #define IS_MIRRORED(mc) ((mc) & (1 << 16)) + #define IS_ECC_ENABLED(mc) ((mc) & (1 << 5)) + #define IS_RETRY_ENABLED(mc) ((mc) & (1 << 31)) + #define IS_SCRBALGO_ENHANCED(mc) ((mc) & (1 << 8)) + +#define MC_SETTINGS_A 0x58 + #define IS_SINGLE_MODE(mca) ((mca) & (1 << 14)) + +#define TOLM 0x6C + +#define MIR0 0x80 +#define MIR1 0x84 +#define MIR2 0x88 + +/* + * Note: Other Intel EDAC drivers use AMBPRESENT to identify if the available + * memory. From datasheet item 7.3.1 (FB-DIMM technology & organization), it + * seems that we cannot use this information directly for the same usage. + * Each memory slot may have up to 2 AMB interfaces, one for income and another + * for outcome interface to the next slot. + * For now, the driver just stores the AMB present registers, but rely only at + * the MTR info to detect memory. + * Datasheet is also not clear about how to map each AMBPRESENT registers to + * one of the 4 available channels. + */ +#define AMBPRESENT_0 0x64 +#define AMBPRESENT_1 0x66 + +static const u16 mtr_regs[MAX_SLOTS] = { + 0x80, 0x84, 0x88, 0x8c, + 0x82, 0x86, 0x8a, 0x8e +}; + +/* + * Defines to extract the vaious fields from the + * MTRx - Memory Technology Registers + */ +#define MTR_DIMMS_PRESENT(mtr) ((mtr) & (1 << 8)) +#define MTR_DIMMS_ETHROTTLE(mtr) ((mtr) & (1 << 7)) +#define MTR_DRAM_WIDTH(mtr) (((mtr) & (1 << 6)) ? 8 : 4) +#define MTR_DRAM_BANKS(mtr) (((mtr) & (1 << 5)) ? 8 : 4) +#define MTR_DIMM_RANKS(mtr) (((mtr) & (1 << 4)) ? 1 : 0) +#define MTR_DIMM_ROWS(mtr) (((mtr) >> 2) & 0x3) +#define MTR_DRAM_BANKS_ADDR_BITS 2 +#define MTR_DIMM_ROWS_ADDR_BITS(mtr) (MTR_DIMM_ROWS(mtr) + 13) +#define MTR_DIMM_COLS(mtr) ((mtr) & 0x3) +#define MTR_DIMM_COLS_ADDR_BITS(mtr) (MTR_DIMM_COLS(mtr) + 10) + +/************************************************ + * i7300 Register definitions for error detection + ************************************************/ + +/* + * Device 16.1: FBD Error Registers + */ +#define FERR_FAT_FBD 0x98 +static const char *ferr_fat_fbd_name[] = { + [22] = "Non-Redundant Fast Reset Timeout", + [2] = ">Tmid Thermal event with intelligent throttling disabled", + [1] = "Memory or FBD configuration CRC read error", + [0] = "Memory Write error on non-redundant retry or " + "FBD configuration Write error on retry", +}; +#define GET_FBD_FAT_IDX(fbderr) (((fbderr) >> 28) & 3) +#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22)) + +#define FERR_NF_FBD 0xa0 +static const char *ferr_nf_fbd_name[] = { + [24] = "DIMM-Spare Copy Completed", + [23] = "DIMM-Spare Copy Initiated", + [22] = "Redundant Fast Reset Timeout", + [21] = "Memory Write error on redundant retry", + [18] = "SPD protocol Error", + [17] = "FBD Northbound parity error on FBD Sync Status", + [16] = "Correctable Patrol Data ECC", + [15] = "Correctable Resilver- or Spare-Copy Data ECC", + [14] = "Correctable Mirrored Demand Data ECC", + [13] = "Correctable Non-Mirrored Demand Data ECC", + [11] = "Memory or FBD configuration CRC read error", + [10] = "FBD Configuration Write error on first attempt", + [9] = "Memory Write error on first attempt", + [8] = "Non-Aliased Uncorrectable Patrol Data ECC", + [7] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", + [6] = "Non-Aliased Uncorrectable Mirrored Demand Data ECC", + [5] = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC", + [4] = "Aliased Uncorrectable Patrol Data ECC", + [3] = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC", + [2] = "Aliased Uncorrectable Mirrored Demand Data ECC", + [1] = "Aliased Uncorrectable Non-Mirrored Demand Data ECC", + [0] = "Uncorrectable Data ECC on Replay", +}; +#define GET_FBD_NF_IDX(fbderr) (((fbderr) >> 28) & 3) +#define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\ + (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\ + (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\ + (1 << 9) | (1 << 8) | (1 << 7) | (1 << 6) |\ + (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) |\ + (1 << 1) | (1 << 0)) + +#define EMASK_FBD 0xa8 +#define EMASK_FBD_ERR_MASK ((1 << 27) | (1 << 26) | (1 << 25) | (1 << 24) |\ + (1 << 22) | (1 << 21) | (1 << 20) | (1 << 19) |\ + (1 << 18) | (1 << 17) | (1 << 16) | (1 << 14) |\ + (1 << 13) | (1 << 12) | (1 << 11) | (1 << 10) |\ + (1 << 9) | (1 << 8) | (1 << 7) | (1 << 6) |\ + (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2) |\ + (1 << 1) | (1 << 0)) + +/* + * Device 16.2: Global Error Registers + */ + +#define FERR_GLOBAL_HI 0x48 +static const char *ferr_global_hi_name[] = { + [3] = "FSB 3 Fatal Error", + [2] = "FSB 2 Fatal Error", + [1] = "FSB 1 Fatal Error", + [0] = "FSB 0 Fatal Error", +}; +#define ferr_global_hi_is_fatal(errno) 1 + +#define FERR_GLOBAL_LO 0x40 +static const char *ferr_global_lo_name[] = { + [31] = "Internal MCH Fatal Error", + [30] = "Intel QuickData Technology Device Fatal Error", + [29] = "FSB1 Fatal Error", + [28] = "FSB0 Fatal Error", + [27] = "FBD Channel 3 Fatal Error", + [26] = "FBD Channel 2 Fatal Error", + [25] = "FBD Channel 1 Fatal Error", + [24] = "FBD Channel 0 Fatal Error", + [23] = "PCI Express Device 7Fatal Error", + [22] = "PCI Express Device 6 Fatal Error", + [21] = "PCI Express Device 5 Fatal Error", + [20] = "PCI Express Device 4 Fatal Error", + [19] = "PCI Express Device 3 Fatal Error", + [18] = "PCI Express Device 2 Fatal Error", + [17] = "PCI Express Device 1 Fatal Error", + [16] = "ESI Fatal Error", + [15] = "Internal MCH Non-Fatal Error", + [14] = "Intel QuickData Technology Device Non Fatal Error", + [13] = "FSB1 Non-Fatal Error", + [12] = "FSB 0 Non-Fatal Error", + [11] = "FBD Channel 3 Non-Fatal Error", + [10] = "FBD Channel 2 Non-Fatal Error", + [9] = "FBD Channel 1 Non-Fatal Error", + [8] = "FBD Channel 0 Non-Fatal Error", + [7] = "PCI Express Device 7 Non-Fatal Error", + [6] = "PCI Express Device 6 Non-Fatal Error", + [5] = "PCI Express Device 5 Non-Fatal Error", + [4] = "PCI Express Device 4 Non-Fatal Error", + [3] = "PCI Express Device 3 Non-Fatal Error", + [2] = "PCI Express Device 2 Non-Fatal Error", + [1] = "PCI Express Device 1 Non-Fatal Error", + [0] = "ESI Non-Fatal Error", +}; +#define ferr_global_lo_is_fatal(errno) ((errno < 16) ? 0 : 1) + +#define NRECMEMA 0xbe + #define NRECMEMA_BANK(v) (((v) >> 12) & 7) + #define NRECMEMA_RANK(v) (((v) >> 8) & 15) + +#define NRECMEMB 0xc0 + #define NRECMEMB_IS_WR(v) ((v) & (1 << 31)) + #define NRECMEMB_CAS(v) (((v) >> 16) & 0x1fff) + #define NRECMEMB_RAS(v) ((v) & 0xffff) + +#define REDMEMA 0xdc + +#define REDMEMB 0x7c + +#define RECMEMA 0xe0 + #define RECMEMA_BANK(v) (((v) >> 12) & 7) + #define RECMEMA_RANK(v) (((v) >> 8) & 15) + +#define RECMEMB 0xe4 + #define RECMEMB_IS_WR(v) ((v) & (1 << 31)) + #define RECMEMB_CAS(v) (((v) >> 16) & 0x1fff) + #define RECMEMB_RAS(v) ((v) & 0xffff) + +/******************************************** + * i7300 Functions related to error detection + ********************************************/ + +/** + * get_err_from_table() - Gets the error message from a table + * @table: table name (array of char *) + * @size: number of elements at the table + * @pos: position of the element to be returned + * + * This is a small routine that gets the pos-th element of a table. If the + * element doesn't exist (or it is empty), it returns "reserved". + * Instead of calling it directly, the better is to call via the macro + * GET_ERR_FROM_TABLE(), that automatically checks the table size via + * ARRAY_SIZE() macro + */ +static const char *get_err_from_table(const char *table[], int size, int pos) +{ + if (unlikely(pos >= size)) + return "Reserved"; + + if (unlikely(!table[pos])) + return "Reserved"; + + return table[pos]; +} + +#define GET_ERR_FROM_TABLE(table, pos) \ + get_err_from_table(table, ARRAY_SIZE(table), pos) + +/** + * i7300_process_error_global() - Retrieve the hardware error information from + * the hardware global error registers and + * sends it to dmesg + * @mci: struct mem_ctl_info pointer + */ +static void i7300_process_error_global(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + u32 errnum, error_reg; + unsigned long errors; + const char *specific; + bool is_fatal; + + pvt = mci->pvt_info; + + /* read in the 1st FATAL error register */ + pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_HI, &error_reg); + if (unlikely(error_reg)) { + errors = error_reg; + errnum = find_first_bit(&errors, + ARRAY_SIZE(ferr_global_hi_name)); + specific = GET_ERR_FROM_TABLE(ferr_global_hi_name, errnum); + is_fatal = ferr_global_hi_is_fatal(errnum); + + /* Clear the error bit */ + pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_HI, error_reg); + + goto error_global; + } + + pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_LO, &error_reg); + if (unlikely(error_reg)) { + errors = error_reg; + errnum = find_first_bit(&errors, + ARRAY_SIZE(ferr_global_lo_name)); + specific = GET_ERR_FROM_TABLE(ferr_global_lo_name, errnum); + is_fatal = ferr_global_lo_is_fatal(errnum); + + /* Clear the error bit */ + pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_LO, error_reg); + + goto error_global; + } + return; + +error_global: + i7300_mc_printk(mci, KERN_EMERG, "%s misc error: %s\n", + is_fatal ? "Fatal" : "NOT fatal", specific); +} + +/** + * i7300_process_fbd_error() - Retrieve the hardware error information from + * the FBD error registers and sends it via + * EDAC error API calls + * @mci: struct mem_ctl_info pointer + */ +static void i7300_process_fbd_error(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + u32 errnum, value, error_reg; + u16 val16; + unsigned branch, channel, bank, rank, cas, ras; + u32 syndrome; + + unsigned long errors; + const char *specific; + bool is_wr; + + pvt = mci->pvt_info; + + /* read in the 1st FATAL error register */ + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_FAT_FBD, &error_reg); + if (unlikely(error_reg & FERR_FAT_FBD_ERR_MASK)) { + errors = error_reg & FERR_FAT_FBD_ERR_MASK ; + errnum = find_first_bit(&errors, + ARRAY_SIZE(ferr_fat_fbd_name)); + specific = GET_ERR_FROM_TABLE(ferr_fat_fbd_name, errnum); + branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0; + + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, + NRECMEMA, &val16); + bank = NRECMEMA_BANK(val16); + rank = NRECMEMA_RANK(val16); + + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + NRECMEMB, &value); + is_wr = NRECMEMB_IS_WR(value); + cas = NRECMEMB_CAS(value); + ras = NRECMEMB_RAS(value); + + /* Clean the error register */ + pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_FAT_FBD, error_reg); + + snprintf(pvt->tmp_prt_buffer, PAGE_SIZE, + "Bank=%d RAS=%d CAS=%d Err=0x%lx (%s))", + bank, ras, cas, errors, specific); + + edac_mc_handle_error(HW_EVENT_ERR_FATAL, mci, 1, 0, 0, 0, + branch, -1, rank, + is_wr ? "Write error" : "Read error", + pvt->tmp_prt_buffer); + + } + + /* read in the 1st NON-FATAL error register */ + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_NF_FBD, &error_reg); + if (unlikely(error_reg & FERR_NF_FBD_ERR_MASK)) { + errors = error_reg & FERR_NF_FBD_ERR_MASK; + errnum = find_first_bit(&errors, + ARRAY_SIZE(ferr_nf_fbd_name)); + specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum); + branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0; + + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + REDMEMA, &syndrome); + + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, + RECMEMA, &val16); + bank = RECMEMA_BANK(val16); + rank = RECMEMA_RANK(val16); + + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + RECMEMB, &value); + is_wr = RECMEMB_IS_WR(value); + cas = RECMEMB_CAS(value); + ras = RECMEMB_RAS(value); + + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + REDMEMB, &value); + channel = (branch << 1); + + /* Second channel ? */ + channel += !!(value & BIT(17)); + + /* Clear the error bit */ + pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_NF_FBD, error_reg); + + /* Form out message */ + snprintf(pvt->tmp_prt_buffer, PAGE_SIZE, + "DRAM-Bank=%d RAS=%d CAS=%d, Err=0x%lx (%s))", + bank, ras, cas, errors, specific); + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, + syndrome, + branch >> 1, channel % 2, rank, + is_wr ? "Write error" : "Read error", + pvt->tmp_prt_buffer); + } + return; +} + +/** + * i7300_check_error() - Calls the error checking subroutines + * @mci: struct mem_ctl_info pointer + */ +static void i7300_check_error(struct mem_ctl_info *mci) +{ + i7300_process_error_global(mci); + i7300_process_fbd_error(mci); +}; + +/** + * i7300_clear_error() - Clears the error registers + * @mci: struct mem_ctl_info pointer + */ +static void i7300_clear_error(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt = mci->pvt_info; + u32 value; + /* + * All error values are RWC - we need to read and write 1 to the + * bit that we want to cleanup + */ + + /* Clear global error registers */ + pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_HI, &value); + pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_HI, value); + + pci_read_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_LO, &value); + pci_write_config_dword(pvt->pci_dev_16_2_fsb_err_regs, + FERR_GLOBAL_LO, value); + + /* Clear FBD error registers */ + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_FAT_FBD, &value); + pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_FAT_FBD, value); + + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_NF_FBD, &value); + pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + FERR_NF_FBD, value); +} + +/** + * i7300_enable_error_reporting() - Enable the memory reporting logic at the + * hardware + * @mci: struct mem_ctl_info pointer + */ +static void i7300_enable_error_reporting(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt = mci->pvt_info; + u32 fbd_error_mask; + + /* Read the FBD Error Mask Register */ + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + EMASK_FBD, &fbd_error_mask); + + /* Enable with a '0' */ + fbd_error_mask &= ~(EMASK_FBD_ERR_MASK); + + pci_write_config_dword(pvt->pci_dev_16_1_fsb_addr_map, + EMASK_FBD, fbd_error_mask); +} + +/************************************************ + * i7300 Functions related to memory enumberation + ************************************************/ + +/** + * decode_mtr() - Decodes the MTR descriptor, filling the edac structs + * @pvt: pointer to the private data struct used by i7300 driver + * @slot: DIMM slot (0 to 7) + * @ch: Channel number within the branch (0 or 1) + * @branch: Branch number (0 or 1) + * @dinfo: Pointer to DIMM info where dimm size is stored + * @dimm: Pointer to the struct dimm_info that corresponds to that element + */ +static int decode_mtr(struct i7300_pvt *pvt, + int slot, int ch, int branch, + struct i7300_dimm_info *dinfo, + struct dimm_info *dimm) +{ + int mtr, ans, addrBits, channel; + + channel = to_channel(ch, branch); + + mtr = pvt->mtr[slot][branch]; + ans = MTR_DIMMS_PRESENT(mtr) ? 1 : 0; + + edac_dbg(2, "\tMTR%d CH%d: DIMMs are %sPresent (mtr)\n", + slot, channel, ans ? "" : "NOT "); + + /* Determine if there is a DIMM present in this DIMM slot */ + if (!ans) + return 0; + + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS; + /* Add thenumber of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* add the number of RANK bits */ + addrBits += MTR_DIMM_RANKS(mtr); + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; + + edac_dbg(2, "\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr)); + + edac_dbg(2, "\t\tELECTRICAL THROTTLING is %s\n", + MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled"); + + edac_dbg(2, "\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr)); + edac_dbg(2, "\t\tNUMRANK: %s\n", + MTR_DIMM_RANKS(mtr) ? "double" : "single"); + edac_dbg(2, "\t\tNUMROW: %s\n", + MTR_DIMM_ROWS(mtr) == 0 ? "8,192 - 13 rows" : + MTR_DIMM_ROWS(mtr) == 1 ? "16,384 - 14 rows" : + MTR_DIMM_ROWS(mtr) == 2 ? "32,768 - 15 rows" : + "65,536 - 16 rows"); + edac_dbg(2, "\t\tNUMCOL: %s\n", + MTR_DIMM_COLS(mtr) == 0 ? "1,024 - 10 columns" : + MTR_DIMM_COLS(mtr) == 1 ? "2,048 - 11 columns" : + MTR_DIMM_COLS(mtr) == 2 ? "4,096 - 12 columns" : + "reserved"); + edac_dbg(2, "\t\tSIZE: %d MB\n", dinfo->megabytes); + + /* + * The type of error detection actually depends of the + * mode of operation. When it is just one single memory chip, at + * socket 0, channel 0, it uses 8-byte-over-32-byte SECDED+ code. + * In normal or mirrored mode, it uses Lockstep mode, + * with the possibility of using an extended algorithm for x8 memories + * See datasheet Sections 7.3.6 to 7.3.8 + */ + + dimm->nr_pages = MiB_TO_PAGES(dinfo->megabytes); + dimm->grain = 8; + dimm->mtype = MEM_FB_DDR2; + if (IS_SINGLE_MODE(pvt->mc_settings_a)) { + dimm->edac_mode = EDAC_SECDED; + edac_dbg(2, "\t\tECC code is 8-byte-over-32-byte SECDED+ code\n"); + } else { + edac_dbg(2, "\t\tECC code is on Lockstep mode\n"); + if (MTR_DRAM_WIDTH(mtr) == 8) + dimm->edac_mode = EDAC_S8ECD8ED; + else + dimm->edac_mode = EDAC_S4ECD4ED; + } + + /* ask what device type on this row */ + if (MTR_DRAM_WIDTH(mtr) == 8) { + edac_dbg(2, "\t\tScrub algorithm for x8 is on %s mode\n", + IS_SCRBALGO_ENHANCED(pvt->mc_settings) ? + "enhanced" : "normal"); + + dimm->dtype = DEV_X8; + } else + dimm->dtype = DEV_X4; + + return mtr; +} + +/** + * print_dimm_size() - Prints dump of the memory organization + * @pvt: pointer to the private data struct used by i7300 driver + * + * Useful for debug. If debug is disabled, this routine do nothing + */ +static void print_dimm_size(struct i7300_pvt *pvt) +{ +#ifdef CONFIG_EDAC_DEBUG + struct i7300_dimm_info *dinfo; + char *p; + int space, n; + int channel, slot; + + space = PAGE_SIZE; + p = pvt->tmp_prt_buffer; + + n = snprintf(p, space, " "); + p += n; + space -= n; + for (channel = 0; channel < MAX_CHANNELS; channel++) { + n = snprintf(p, space, "channel %d | ", channel); + p += n; + space -= n; + } + edac_dbg(2, "%s\n", pvt->tmp_prt_buffer); + p = pvt->tmp_prt_buffer; + space = PAGE_SIZE; + n = snprintf(p, space, "-------------------------------" + "------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", pvt->tmp_prt_buffer); + p = pvt->tmp_prt_buffer; + space = PAGE_SIZE; + + for (slot = 0; slot < MAX_SLOTS; slot++) { + n = snprintf(p, space, "csrow/SLOT %d ", slot); + p += n; + space -= n; + + for (channel = 0; channel < MAX_CHANNELS; channel++) { + dinfo = &pvt->dimm_info[slot][channel]; + n = snprintf(p, space, "%4d MB | ", dinfo->megabytes); + p += n; + space -= n; + } + + edac_dbg(2, "%s\n", pvt->tmp_prt_buffer); + p = pvt->tmp_prt_buffer; + space = PAGE_SIZE; + } + + n = snprintf(p, space, "-------------------------------" + "------------------------------"); + p += n; + space -= n; + edac_dbg(2, "%s\n", pvt->tmp_prt_buffer); + p = pvt->tmp_prt_buffer; + space = PAGE_SIZE; +#endif +} + +/** + * i7300_init_csrows() - Initialize the 'csrows' table within + * the mci control structure with the + * addressing of memory. + * @mci: struct mem_ctl_info pointer + */ +static int i7300_init_csrows(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + struct i7300_dimm_info *dinfo; + int rc = -ENODEV; + int mtr; + int ch, branch, slot, channel, max_channel, max_branch; + struct dimm_info *dimm; + + pvt = mci->pvt_info; + + edac_dbg(2, "Memory Technology Registers:\n"); + + if (IS_SINGLE_MODE(pvt->mc_settings_a)) { + max_branch = 1; + max_channel = 1; + } else { + max_branch = MAX_BRANCHES; + max_channel = MAX_CH_PER_BRANCH; + } + + /* Get the AMB present registers for the four channels */ + for (branch = 0; branch < max_branch; branch++) { + /* Read and dump branch 0's MTRs */ + channel = to_channel(0, branch); + pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], + AMBPRESENT_0, + &pvt->ambpresent[channel]); + edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n", + channel, pvt->ambpresent[channel]); + + if (max_channel == 1) + continue; + + channel = to_channel(1, branch); + pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], + AMBPRESENT_1, + &pvt->ambpresent[channel]); + edac_dbg(2, "\t\tAMB-present CH%d = 0x%x:\n", + channel, pvt->ambpresent[channel]); + } + + /* Get the set of MTR[0-7] regs by each branch */ + for (slot = 0; slot < MAX_SLOTS; slot++) { + int where = mtr_regs[slot]; + for (branch = 0; branch < max_branch; branch++) { + pci_read_config_word(pvt->pci_dev_2x_0_fbd_branch[branch], + where, + &pvt->mtr[slot][branch]); + for (ch = 0; ch < max_channel; ch++) { + int channel = to_channel(ch, branch); + + dimm = edac_get_dimm(mci, branch, ch, slot); + + dinfo = &pvt->dimm_info[slot][channel]; + + mtr = decode_mtr(pvt, slot, ch, branch, + dinfo, dimm); + + /* if no DIMMS on this row, continue */ + if (!MTR_DIMMS_PRESENT(mtr)) + continue; + + rc = 0; + + } + } + } + + return rc; +} + +/** + * decode_mir() - Decodes Memory Interleave Register (MIR) info + * @mir_no: number of the MIR register to decode + * @mir: array with the MIR data cached on the driver + */ +static void decode_mir(int mir_no, u16 mir[MAX_MIR]) +{ + if (mir[mir_no] & 3) + edac_dbg(2, "MIR%d: limit= 0x%x Branch(es) that participate: %s %s\n", + mir_no, + (mir[mir_no] >> 4) & 0xfff, + (mir[mir_no] & 1) ? "B0" : "", + (mir[mir_no] & 2) ? "B1" : ""); +} + +/** + * i7300_get_mc_regs() - Get the contents of the MC enumeration registers + * @mci: struct mem_ctl_info pointer + * + * Data read is cached internally for its usage when needed + */ +static int i7300_get_mc_regs(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + u32 actual_tolm; + int i, rc; + + pvt = mci->pvt_info; + + pci_read_config_dword(pvt->pci_dev_16_0_fsb_ctlr, AMBASE, + (u32 *) &pvt->ambase); + + edac_dbg(2, "AMBASE= 0x%lx\n", (long unsigned int)pvt->ambase); + + /* Get the Branch Map regs */ + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, TOLM, &pvt->tolm); + pvt->tolm >>= 12; + edac_dbg(2, "TOLM (number of 256M regions) =%u (0x%x)\n", + pvt->tolm, pvt->tolm); + + actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28)); + edac_dbg(2, "Actual TOLM byte addr=%u.%03u GB (0x%x)\n", + actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28); + + /* Get memory controller settings */ + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS, + &pvt->mc_settings); + pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, MC_SETTINGS_A, + &pvt->mc_settings_a); + + if (IS_SINGLE_MODE(pvt->mc_settings_a)) + edac_dbg(0, "Memory controller operating on single mode\n"); + else + edac_dbg(0, "Memory controller operating on %smirrored mode\n", + IS_MIRRORED(pvt->mc_settings) ? "" : "non-"); + + edac_dbg(0, "Error detection is %s\n", + IS_ECC_ENABLED(pvt->mc_settings) ? "enabled" : "disabled"); + edac_dbg(0, "Retry is %s\n", + IS_RETRY_ENABLED(pvt->mc_settings) ? "enabled" : "disabled"); + + /* Get Memory Interleave Range registers */ + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR0, + &pvt->mir[0]); + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR1, + &pvt->mir[1]); + pci_read_config_word(pvt->pci_dev_16_1_fsb_addr_map, MIR2, + &pvt->mir[2]); + + /* Decode the MIR regs */ + for (i = 0; i < MAX_MIR; i++) + decode_mir(i, pvt->mir); + + rc = i7300_init_csrows(mci); + if (rc < 0) + return rc; + + /* Go and determine the size of each DIMM and place in an + * orderly matrix */ + print_dimm_size(pvt); + + return 0; +} + +/************************************************* + * i7300 Functions related to device probe/release + *************************************************/ + +/** + * i7300_put_devices() - Release the PCI devices + * @mci: struct mem_ctl_info pointer + */ +static void i7300_put_devices(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + int branch; + + pvt = mci->pvt_info; + + /* Decrement usage count for devices */ + for (branch = 0; branch < MAX_CH_PER_BRANCH; branch++) + pci_dev_put(pvt->pci_dev_2x_0_fbd_branch[branch]); + pci_dev_put(pvt->pci_dev_16_2_fsb_err_regs); + pci_dev_put(pvt->pci_dev_16_1_fsb_addr_map); +} + +/** + * i7300_get_devices() - Find and perform 'get' operation on the MCH's + * device/functions we want to reference for this driver + * @mci: struct mem_ctl_info pointer + * + * Access and prepare the several devices for usage: + * I7300 devices used by this driver: + * Device 16, functions 0,1 and 2: PCI_DEVICE_ID_INTEL_I7300_MCH_ERR + * Device 21 function 0: PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 + * Device 22 function 0: PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 + */ +static int i7300_get_devices(struct mem_ctl_info *mci) +{ + struct i7300_pvt *pvt; + struct pci_dev *pdev; + + pvt = mci->pvt_info; + + /* Attempt to 'get' the MCH register we want */ + pdev = NULL; + while ((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, + pdev))) { + /* Store device 16 funcs 1 and 2 */ + switch (PCI_FUNC(pdev->devfn)) { + case 1: + if (!pvt->pci_dev_16_1_fsb_addr_map) + pvt->pci_dev_16_1_fsb_addr_map = + pci_dev_get(pdev); + break; + case 2: + if (!pvt->pci_dev_16_2_fsb_err_regs) + pvt->pci_dev_16_2_fsb_err_regs = + pci_dev_get(pdev); + break; + } + } + + if (!pvt->pci_dev_16_1_fsb_addr_map || + !pvt->pci_dev_16_2_fsb_err_regs) { + /* At least one device was not found */ + i7300_printk(KERN_ERR, + "'system address,Process Bus' device not found:" + "vendor 0x%x device 0x%x ERR funcs (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_ERR); + goto error; + } + + edac_dbg(1, "System Address, processor bus- PCI Bus ID: %s %x:%x\n", + pci_name(pvt->pci_dev_16_0_fsb_ctlr), + pvt->pci_dev_16_0_fsb_ctlr->vendor, + pvt->pci_dev_16_0_fsb_ctlr->device); + edac_dbg(1, "Branchmap, control and errors - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->pci_dev_16_1_fsb_addr_map), + pvt->pci_dev_16_1_fsb_addr_map->vendor, + pvt->pci_dev_16_1_fsb_addr_map->device); + edac_dbg(1, "FSB Error Regs - PCI Bus ID: %s %x:%x\n", + pci_name(pvt->pci_dev_16_2_fsb_err_regs), + pvt->pci_dev_16_2_fsb_err_regs->vendor, + pvt->pci_dev_16_2_fsb_err_regs->device); + + pvt->pci_dev_2x_0_fbd_branch[0] = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_FB0, + NULL); + if (!pvt->pci_dev_2x_0_fbd_branch[0]) { + i7300_printk(KERN_ERR, + "MC: 'BRANCH 0' device not found:" + "vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_FB0); + goto error; + } + + pvt->pci_dev_2x_0_fbd_branch[1] = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_FB1, + NULL); + if (!pvt->pci_dev_2x_0_fbd_branch[1]) { + i7300_printk(KERN_ERR, + "MC: 'BRANCH 1' device not found:" + "vendor 0x%x device 0x%x Func 0 " + "(broken BIOS?)\n", + PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7300_MCH_FB1); + goto error; + } + + return 0; + +error: + i7300_put_devices(mci); + return -ENODEV; +} + +/** + * i7300_init_one() - Probe for one instance of the device + * @pdev: struct pci_dev pointer + * @id: struct pci_device_id pointer - currently unused + */ +static int i7300_init_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[3]; + struct i7300_pvt *pvt; + int rc; + + /* wake up device */ + rc = pci_enable_device(pdev); + if (rc == -EIO) + return rc; + + edac_dbg(0, "MC: pdev bus %u dev=0x%x fn=0x%x\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + + /* We only are looking for func 0 of the set */ + if (PCI_FUNC(pdev->devfn) != 0) + return -ENODEV; + + /* allocate a new MC control structure */ + layers[0].type = EDAC_MC_LAYER_BRANCH; + layers[0].size = MAX_BRANCHES; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = MAX_CH_PER_BRANCH; + layers[1].is_virt_csrow = true; + layers[2].type = EDAC_MC_LAYER_SLOT; + layers[2].size = MAX_SLOTS; + layers[2].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p\n", mci); + + mci->pdev = &pdev->dev; /* record ptr to the generic device */ + + pvt = mci->pvt_info; + pvt->pci_dev_16_0_fsb_ctlr = pdev; /* Record this device in our private */ + + pvt->tmp_prt_buffer = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pvt->tmp_prt_buffer) { + edac_mc_free(mci); + return -ENOMEM; + } + + /* 'get' the pci devices we want to reserve for our use */ + if (i7300_get_devices(mci)) + goto fail0; + + mci->mc_idx = 0; + mci->mtype_cap = MEM_FLAG_FB_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "i7300_edac.c"; + mci->ctl_name = i7300_devs[0].ctl_name; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + /* Set the function pointer to an actual operation function */ + mci->edac_check = i7300_check_error; + + /* initialize the MC control structure 'csrows' table + * with the mapping and control information */ + if (i7300_get_mc_regs(mci)) { + edac_dbg(0, "MC: Setting mci->edac_cap to EDAC_FLAG_NONE because i7300_init_csrows() returned nonzero value\n"); + mci->edac_cap = EDAC_FLAG_NONE; /* no csrows found */ + } else { + edac_dbg(1, "MC: Enable error reporting now\n"); + i7300_enable_error_reporting(mci); + } + + /* add this new MC control structure to EDAC's list of MCs */ + if (edac_mc_add_mc(mci)) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + /* FIXME: perhaps some code should go here that disables error + * reporting if we just enabled it + */ + goto fail1; + } + + i7300_clear_error(mci); + + /* allocating generic PCI control info */ + i7300_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i7300_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + return 0; + + /* Error exit unwinding stack */ +fail1: + + i7300_put_devices(mci); + +fail0: + kfree(pvt->tmp_prt_buffer); + edac_mc_free(mci); + return -ENODEV; +} + +/** + * i7300_remove_one() - Remove the driver + * @pdev: struct pci_dev pointer + */ +static void i7300_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + char *tmp; + + edac_dbg(0, "\n"); + + if (i7300_pci) + edac_pci_release_generic_ctl(i7300_pci); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + tmp = ((struct i7300_pvt *)mci->pvt_info)->tmp_prt_buffer; + + /* retrieve references to resources, and free those resources */ + i7300_put_devices(mci); + + kfree(tmp); + edac_mc_free(mci); +} + +/* + * pci_device_id: table for which devices we are looking for + * + * Has only 8086:360c PCI ID + */ +static const struct pci_device_id i7300_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_ERR)}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i7300_pci_tbl); + +/* + * i7300_driver: pci_driver structure for this module + */ +static struct pci_driver i7300_driver = { + .name = "i7300_edac", + .probe = i7300_init_one, + .remove = i7300_remove_one, + .id_table = i7300_pci_tbl, +}; + +/** + * i7300_init() - Registers the driver + */ +static int __init i7300_init(void) +{ + int pci_rc; + + edac_dbg(2, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i7300_driver); + + return (pci_rc < 0) ? pci_rc : 0; +} + +/** + * i7300_exit() - Unregisters the driver + */ +static void __exit i7300_exit(void) +{ + edac_dbg(2, "\n"); + pci_unregister_driver(&i7300_driver); +} + +module_init(i7300_init); +module_exit(i7300_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_AUTHOR("Red Hat Inc. (https://www.redhat.com)"); +MODULE_DESCRIPTION("MC Driver for Intel I7300 memory controllers - " + I7300_REVISION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c new file mode 100644 index 000000000..23d25724b --- /dev/null +++ b/drivers/edac/i7core_edac.c @@ -0,0 +1,2399 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Intel i7 core/Nehalem Memory Controller kernel module + * + * This driver supports the memory controllers found on the Intel + * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx, + * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield + * and Westmere-EP. + * + * Copyright (c) 2009-2010 by: + * Mauro Carvalho Chehab + * + * Red Hat Inc. https://www.redhat.com + * + * Forked and adapted from the i5400_edac driver + * + * Based on the following public Intel datasheets: + * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor + * Datasheet, Volume 2: + * http://download.intel.com/design/processor/datashts/320835.pdf + * Intel Xeon Processor 5500 Series Datasheet Volume 2 + * http://www.intel.com/Assets/PDF/datasheet/321322.pdf + * also available at: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/edac.h> +#include <linux/mmzone.h> +#include <linux/smp.h> +#include <asm/mce.h> +#include <asm/processor.h> +#include <asm/div64.h> + +#include "edac_module.h" + +/* Static vars */ +static LIST_HEAD(i7core_edac_list); +static DEFINE_MUTEX(i7core_edac_lock); +static int probed; + +static int use_pci_fixup; +module_param(use_pci_fixup, int, 0444); +MODULE_PARM_DESC(use_pci_fixup, "Enable PCI fixup to seek for hidden devices"); +/* + * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core + * registers start at bus 255, and are not reported by BIOS. + * We currently find devices with only 2 sockets. In order to support more QPI + * Quick Path Interconnect, just increment this number. + */ +#define MAX_SOCKET_BUSES 2 + + +/* + * Alter this version for the module when modifications are made + */ +#define I7CORE_REVISION " Ver: 1.0.0" +#define EDAC_MOD_STR "i7core_edac" + +/* + * Debug macros + */ +#define i7core_printk(level, fmt, arg...) \ + edac_printk(level, "i7core", fmt, ##arg) + +#define i7core_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg) + +/* + * i7core Memory Controller Registers + */ + + /* OFFSETS for Device 0 Function 0 */ + +#define MC_CFG_CONTROL 0x90 + #define MC_CFG_UNLOCK 0x02 + #define MC_CFG_LOCK 0x00 + + /* OFFSETS for Device 3 Function 0 */ + +#define MC_CONTROL 0x48 +#define MC_STATUS 0x4c +#define MC_MAX_DOD 0x64 + +/* + * OFFSETS for Device 3 Function 4, as indicated on Xeon 5500 datasheet: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ + +#define MC_TEST_ERR_RCV1 0x60 + #define DIMM2_COR_ERR(r) ((r) & 0x7fff) + +#define MC_TEST_ERR_RCV0 0x64 + #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff) + #define DIMM0_COR_ERR(r) ((r) & 0x7fff) + +/* OFFSETS for Device 3 Function 2, as indicated on Xeon 5500 datasheet */ +#define MC_SSRCONTROL 0x48 + #define SSR_MODE_DISABLE 0x00 + #define SSR_MODE_ENABLE 0x01 + #define SSR_MODE_MASK 0x03 + +#define MC_SCRUB_CONTROL 0x4c + #define STARTSCRUB (1 << 24) + #define SCRUBINTERVAL_MASK 0xffffff + +#define MC_COR_ECC_CNT_0 0x80 +#define MC_COR_ECC_CNT_1 0x84 +#define MC_COR_ECC_CNT_2 0x88 +#define MC_COR_ECC_CNT_3 0x8c +#define MC_COR_ECC_CNT_4 0x90 +#define MC_COR_ECC_CNT_5 0x94 + +#define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff) +#define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff) + + + /* OFFSETS for Devices 4,5 and 6 Function 0 */ + +#define MC_CHANNEL_DIMM_INIT_PARAMS 0x58 + #define THREE_DIMMS_PRESENT (1 << 24) + #define SINGLE_QUAD_RANK_PRESENT (1 << 23) + #define QUAD_RANK_PRESENT (1 << 22) + #define REGISTERED_DIMM (1 << 15) + +#define MC_CHANNEL_MAPPER 0x60 + #define RDLCH(r, ch) ((((r) >> (3 + (ch * 6))) & 0x07) - 1) + #define WRLCH(r, ch) ((((r) >> (ch * 6)) & 0x07) - 1) + +#define MC_CHANNEL_RANK_PRESENT 0x7c + #define RANK_PRESENT_MASK 0xffff + +#define MC_CHANNEL_ADDR_MATCH 0xf0 +#define MC_CHANNEL_ERROR_MASK 0xf8 +#define MC_CHANNEL_ERROR_INJECT 0xfc + #define INJECT_ADDR_PARITY 0x10 + #define INJECT_ECC 0x08 + #define MASK_CACHELINE 0x06 + #define MASK_FULL_CACHELINE 0x06 + #define MASK_MSB32_CACHELINE 0x04 + #define MASK_LSB32_CACHELINE 0x02 + #define NO_MASK_CACHELINE 0x00 + #define REPEAT_EN 0x01 + + /* OFFSETS for Devices 4,5 and 6 Function 1 */ + +#define MC_DOD_CH_DIMM0 0x48 +#define MC_DOD_CH_DIMM1 0x4c +#define MC_DOD_CH_DIMM2 0x50 + #define RANKOFFSET_MASK ((1 << 12) | (1 << 11) | (1 << 10)) + #define RANKOFFSET(x) ((x & RANKOFFSET_MASK) >> 10) + #define DIMM_PRESENT_MASK (1 << 9) + #define DIMM_PRESENT(x) (((x) & DIMM_PRESENT_MASK) >> 9) + #define MC_DOD_NUMBANK_MASK ((1 << 8) | (1 << 7)) + #define MC_DOD_NUMBANK(x) (((x) & MC_DOD_NUMBANK_MASK) >> 7) + #define MC_DOD_NUMRANK_MASK ((1 << 6) | (1 << 5)) + #define MC_DOD_NUMRANK(x) (((x) & MC_DOD_NUMRANK_MASK) >> 5) + #define MC_DOD_NUMROW_MASK ((1 << 4) | (1 << 3) | (1 << 2)) + #define MC_DOD_NUMROW(x) (((x) & MC_DOD_NUMROW_MASK) >> 2) + #define MC_DOD_NUMCOL_MASK 3 + #define MC_DOD_NUMCOL(x) ((x) & MC_DOD_NUMCOL_MASK) + +#define MC_RANK_PRESENT 0x7c + +#define MC_SAG_CH_0 0x80 +#define MC_SAG_CH_1 0x84 +#define MC_SAG_CH_2 0x88 +#define MC_SAG_CH_3 0x8c +#define MC_SAG_CH_4 0x90 +#define MC_SAG_CH_5 0x94 +#define MC_SAG_CH_6 0x98 +#define MC_SAG_CH_7 0x9c + +#define MC_RIR_LIMIT_CH_0 0x40 +#define MC_RIR_LIMIT_CH_1 0x44 +#define MC_RIR_LIMIT_CH_2 0x48 +#define MC_RIR_LIMIT_CH_3 0x4C +#define MC_RIR_LIMIT_CH_4 0x50 +#define MC_RIR_LIMIT_CH_5 0x54 +#define MC_RIR_LIMIT_CH_6 0x58 +#define MC_RIR_LIMIT_CH_7 0x5C +#define MC_RIR_LIMIT_MASK ((1 << 10) - 1) + +#define MC_RIR_WAY_CH 0x80 + #define MC_RIR_WAY_OFFSET_MASK (((1 << 14) - 1) & ~0x7) + #define MC_RIR_WAY_RANK_MASK 0x7 + +/* + * i7core structs + */ + +#define NUM_CHANS 3 +#define MAX_DIMMS 3 /* Max DIMMS per channel */ +#define MAX_MCR_FUNC 4 +#define MAX_CHAN_FUNC 3 + +struct i7core_info { + u32 mc_control; + u32 mc_status; + u32 max_dod; + u32 ch_map; +}; + + +struct i7core_inject { + int enable; + + u32 section; + u32 type; + u32 eccmask; + + /* Error address mask */ + int channel, dimm, rank, bank, page, col; +}; + +struct i7core_channel { + bool is_3dimms_present; + bool is_single_4rank; + bool has_4rank; + u32 dimms; +}; + +struct pci_id_descr { + int dev; + int func; + int dev_id; + int optional; +}; + +struct pci_id_table { + const struct pci_id_descr *descr; + int n_devs; +}; + +struct i7core_dev { + struct list_head list; + u8 socket; + struct pci_dev **pdev; + int n_devs; + struct mem_ctl_info *mci; +}; + +struct i7core_pvt { + struct device *addrmatch_dev, *chancounts_dev; + + struct pci_dev *pci_noncore; + struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1]; + struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1]; + + struct i7core_dev *i7core_dev; + + struct i7core_info info; + struct i7core_inject inject; + struct i7core_channel channel[NUM_CHANS]; + + int ce_count_available; + + /* ECC corrected errors counts per udimm */ + unsigned long udimm_ce_count[MAX_DIMMS]; + int udimm_last_ce_count[MAX_DIMMS]; + /* ECC corrected errors counts per rdimm */ + unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS]; + int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS]; + + bool is_registered, enable_scrub; + + /* DCLK Frequency used for computing scrub rate */ + int dclk_freq; + + /* Struct to control EDAC polling */ + struct edac_pci_ctl_info *i7core_pci; +}; + +#define PCI_DESCR(device, function, device_id) \ + .dev = (device), \ + .func = (function), \ + .dev_id = (device_id) + +static const struct pci_id_descr pci_dev_descr_i7core_nehalem[] = { + /* Memory controller */ + { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) }, + { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) }, + /* Exists only for RDIMM */ + { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 }, + { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) }, + + /* Channel 0 */ + { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) }, + { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) }, + { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) }, + { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC) }, + + /* Channel 1 */ + { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) }, + { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) }, + { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) }, + { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC) }, + + /* Channel 2 */ + { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) }, + { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) }, + { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) }, + { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) }, + + /* Generic Non-core registers */ + /* + * This is the PCI device on i7core and on Xeon 35xx (8086:2c41) + * On Xeon 55xx, however, it has a different id (8086:2c40). So, + * the probing code needs to test for the other address in case of + * failure of this one + */ + { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) }, + +}; + +static const struct pci_id_descr pci_dev_descr_lynnfield[] = { + { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) }, + { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) }, + { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) }, + + { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) }, + { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) }, + { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) }, + { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) }, + + { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) }, + { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) }, + { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) }, + { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) }, + + /* + * This is the PCI device has an alternate address on some + * processors like Core i7 860 + */ + { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) }, +}; + +static const struct pci_id_descr pci_dev_descr_i7core_westmere[] = { + /* Memory controller */ + { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) }, + { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) }, + /* Exists only for RDIMM */ + { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 }, + { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) }, + + /* Channel 0 */ + { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) }, + { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) }, + { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) }, + { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) }, + + /* Channel 1 */ + { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) }, + { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) }, + { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) }, + { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) }, + + /* Channel 2 */ + { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) }, + { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) }, + { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) }, + { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) }, + + /* Generic Non-core registers */ + { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) }, + +}; + +#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) } +static const struct pci_id_table pci_dev_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem), + PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield), + PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere), + {0,} /* 0 terminated list. */ +}; + +/* + * pci_device_id table for which devices we are looking for + */ +static const struct pci_device_id i7core_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)}, + {0,} /* 0 terminated list. */ +}; + +/**************************************************************************** + Ancillary status routines + ****************************************************************************/ + + /* MC_CONTROL bits */ +#define CH_ACTIVE(pvt, ch) ((pvt)->info.mc_control & (1 << (8 + ch))) +#define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1)) + + /* MC_STATUS bits */ +#define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4)) +#define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch)) + + /* MC_MAX_DOD read functions */ +static inline int numdimms(u32 dimms) +{ + return (dimms & 0x3) + 1; +} + +static inline int numrank(u32 rank) +{ + static const int ranks[] = { 1, 2, 4, -EINVAL }; + + return ranks[rank & 0x3]; +} + +static inline int numbank(u32 bank) +{ + static const int banks[] = { 4, 8, 16, -EINVAL }; + + return banks[bank & 0x3]; +} + +static inline int numrow(u32 row) +{ + static const int rows[] = { + 1 << 12, 1 << 13, 1 << 14, 1 << 15, + 1 << 16, -EINVAL, -EINVAL, -EINVAL, + }; + + return rows[row & 0x7]; +} + +static inline int numcol(u32 col) +{ + static const int cols[] = { + 1 << 10, 1 << 11, 1 << 12, -EINVAL, + }; + return cols[col & 0x3]; +} + +static struct i7core_dev *get_i7core_dev(u8 socket) +{ + struct i7core_dev *i7core_dev; + + list_for_each_entry(i7core_dev, &i7core_edac_list, list) { + if (i7core_dev->socket == socket) + return i7core_dev; + } + + return NULL; +} + +static struct i7core_dev *alloc_i7core_dev(u8 socket, + const struct pci_id_table *table) +{ + struct i7core_dev *i7core_dev; + + i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL); + if (!i7core_dev) + return NULL; + + i7core_dev->pdev = kcalloc(table->n_devs, sizeof(*i7core_dev->pdev), + GFP_KERNEL); + if (!i7core_dev->pdev) { + kfree(i7core_dev); + return NULL; + } + + i7core_dev->socket = socket; + i7core_dev->n_devs = table->n_devs; + list_add_tail(&i7core_dev->list, &i7core_edac_list); + + return i7core_dev; +} + +static void free_i7core_dev(struct i7core_dev *i7core_dev) +{ + list_del(&i7core_dev->list); + kfree(i7core_dev->pdev); + kfree(i7core_dev); +} + +/**************************************************************************** + Memory check routines + ****************************************************************************/ + +static int get_dimm_config(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + int i, j; + enum edac_type mode; + enum mem_type mtype; + struct dimm_info *dimm; + + /* Get data from the MC register, function 0 */ + pdev = pvt->pci_mcr[0]; + if (!pdev) + return -ENODEV; + + /* Device 3 function 0 reads */ + pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control); + pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status); + pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod); + pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map); + + edac_dbg(0, "QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n", + pvt->i7core_dev->socket, pvt->info.mc_control, + pvt->info.mc_status, pvt->info.max_dod, pvt->info.ch_map); + + if (ECC_ENABLED(pvt)) { + edac_dbg(0, "ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4); + if (ECCx8(pvt)) + mode = EDAC_S8ECD8ED; + else + mode = EDAC_S4ECD4ED; + } else { + edac_dbg(0, "ECC disabled\n"); + mode = EDAC_NONE; + } + + /* FIXME: need to handle the error codes */ + edac_dbg(0, "DOD Max limits: DIMMS: %d, %d-ranked, %d-banked x%x x 0x%x\n", + numdimms(pvt->info.max_dod), + numrank(pvt->info.max_dod >> 2), + numbank(pvt->info.max_dod >> 4), + numrow(pvt->info.max_dod >> 6), + numcol(pvt->info.max_dod >> 9)); + + for (i = 0; i < NUM_CHANS; i++) { + u32 data, dimm_dod[3], value[8]; + + if (!pvt->pci_ch[i][0]) + continue; + + if (!CH_ACTIVE(pvt, i)) { + edac_dbg(0, "Channel %i is not active\n", i); + continue; + } + if (CH_DISABLED(pvt, i)) { + edac_dbg(0, "Channel %i is disabled\n", i); + continue; + } + + /* Devices 4-6 function 0 */ + pci_read_config_dword(pvt->pci_ch[i][0], + MC_CHANNEL_DIMM_INIT_PARAMS, &data); + + + if (data & THREE_DIMMS_PRESENT) + pvt->channel[i].is_3dimms_present = true; + + if (data & SINGLE_QUAD_RANK_PRESENT) + pvt->channel[i].is_single_4rank = true; + + if (data & QUAD_RANK_PRESENT) + pvt->channel[i].has_4rank = true; + + if (data & REGISTERED_DIMM) + mtype = MEM_RDDR3; + else + mtype = MEM_DDR3; + + /* Devices 4-6 function 1 */ + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM0, &dimm_dod[0]); + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM1, &dimm_dod[1]); + pci_read_config_dword(pvt->pci_ch[i][1], + MC_DOD_CH_DIMM2, &dimm_dod[2]); + + edac_dbg(0, "Ch%d phy rd%d, wr%d (0x%08x): %s%s%s%cDIMMs\n", + i, + RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i), + data, + pvt->channel[i].is_3dimms_present ? "3DIMMS " : "", + pvt->channel[i].is_3dimms_present ? "SINGLE_4R " : "", + pvt->channel[i].has_4rank ? "HAS_4R " : "", + (data & REGISTERED_DIMM) ? 'R' : 'U'); + + for (j = 0; j < 3; j++) { + u32 banks, ranks, rows, cols; + u32 size, npages; + + if (!DIMM_PRESENT(dimm_dod[j])) + continue; + + dimm = edac_get_dimm(mci, i, j, 0); + banks = numbank(MC_DOD_NUMBANK(dimm_dod[j])); + ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j])); + rows = numrow(MC_DOD_NUMROW(dimm_dod[j])); + cols = numcol(MC_DOD_NUMCOL(dimm_dod[j])); + + /* DDR3 has 8 I/O banks */ + size = (rows * cols * banks * ranks) >> (20 - 3); + + edac_dbg(0, "\tdimm %d %d MiB offset: %x, bank: %d, rank: %d, row: %#x, col: %#x\n", + j, size, + RANKOFFSET(dimm_dod[j]), + banks, ranks, rows, cols); + + npages = MiB_TO_PAGES(size); + + dimm->nr_pages = npages; + + switch (banks) { + case 4: + dimm->dtype = DEV_X4; + break; + case 8: + dimm->dtype = DEV_X8; + break; + case 16: + dimm->dtype = DEV_X16; + break; + default: + dimm->dtype = DEV_UNKNOWN; + } + + snprintf(dimm->label, sizeof(dimm->label), + "CPU#%uChannel#%u_DIMM#%u", + pvt->i7core_dev->socket, i, j); + dimm->grain = 8; + dimm->edac_mode = mode; + dimm->mtype = mtype; + } + + pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]); + pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]); + pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]); + pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]); + pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]); + pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]); + pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]); + pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]); + edac_dbg(1, "\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i); + for (j = 0; j < 8; j++) + edac_dbg(1, "\t\t%#x\t%#x\t%#x\n", + (value[j] >> 27) & 0x1, + (value[j] >> 24) & 0x7, + (value[j] & ((1 << 24) - 1))); + } + + return 0; +} + +/**************************************************************************** + Error insertion routines + ****************************************************************************/ + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +/* The i7core has independent error injection features per channel. + However, to have a simpler code, we don't allow enabling error injection + on more than one channel. + Also, since a change at an inject parameter will be applied only at enable, + we're disabling error injection on all write calls to the sysfs nodes that + controls the error code injection. + */ +static int disable_inject(const struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + + pvt->inject.enable = 0; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return -ENODEV; + + pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, 0); + + return 0; +} + +/* + * i7core inject inject.section + * + * accept and store error injection inject.section value + * bit 0 - refers to the lower 32-byte half cacheline + * bit 1 - refers to the upper 32-byte half cacheline + */ +static ssize_t i7core_inject_section_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = kstrtoul(data, 10, &value); + if ((rc < 0) || (value > 3)) + return -EIO; + + pvt->inject.section = (u32) value; + return count; +} + +static ssize_t i7core_inject_section_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + return sprintf(data, "0x%08x\n", pvt->inject.section); +} + +/* + * i7core inject.type + * + * accept and store error injection inject.section value + * bit 0 - repeat enable - Enable error repetition + * bit 1 - inject ECC error + * bit 2 - inject parity error + */ +static ssize_t i7core_inject_type_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = kstrtoul(data, 10, &value); + if ((rc < 0) || (value > 7)) + return -EIO; + + pvt->inject.type = (u32) value; + return count; +} + +static ssize_t i7core_inject_type_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + + return sprintf(data, "0x%08x\n", pvt->inject.type); +} + +/* + * i7core_inject_inject.eccmask_store + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ +static ssize_t i7core_inject_eccmask_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + unsigned long value; + int rc; + + if (pvt->inject.enable) + disable_inject(mci); + + rc = kstrtoul(data, 10, &value); + if (rc < 0) + return -EIO; + + pvt->inject.eccmask = (u32) value; + return count; +} + +static ssize_t i7core_inject_eccmask_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + + return sprintf(data, "0x%08x\n", pvt->inject.eccmask); +} + +/* + * i7core_addrmatch + * + * The type of error (UE/CE) will depend on the inject.eccmask value: + * Any bits set to a 1 will flip the corresponding ECC bit + * Correctable errors can be injected by flipping 1 bit or the bits within + * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or + * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an + * uncorrectable error to be injected. + */ + +#define DECLARE_ADDR_MATCH(param, limit) \ +static ssize_t i7core_inject_store_##param( \ + struct device *dev, \ + struct device_attribute *mattr, \ + const char *data, size_t count) \ +{ \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ + struct i7core_pvt *pvt; \ + long value; \ + int rc; \ + \ + edac_dbg(1, "\n"); \ + pvt = mci->pvt_info; \ + \ + if (pvt->inject.enable) \ + disable_inject(mci); \ + \ + if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\ + value = -1; \ + else { \ + rc = kstrtoul(data, 10, &value); \ + if ((rc < 0) || (value >= limit)) \ + return -EIO; \ + } \ + \ + pvt->inject.param = value; \ + \ + return count; \ +} \ + \ +static ssize_t i7core_inject_show_##param( \ + struct device *dev, \ + struct device_attribute *mattr, \ + char *data) \ +{ \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ + struct i7core_pvt *pvt; \ + \ + pvt = mci->pvt_info; \ + edac_dbg(1, "pvt=%p\n", pvt); \ + if (pvt->inject.param < 0) \ + return sprintf(data, "any\n"); \ + else \ + return sprintf(data, "%d\n", pvt->inject.param);\ +} + +#define ATTR_ADDR_MATCH(param) \ + static DEVICE_ATTR(param, S_IRUGO | S_IWUSR, \ + i7core_inject_show_##param, \ + i7core_inject_store_##param) + +DECLARE_ADDR_MATCH(channel, 3); +DECLARE_ADDR_MATCH(dimm, 3); +DECLARE_ADDR_MATCH(rank, 4); +DECLARE_ADDR_MATCH(bank, 32); +DECLARE_ADDR_MATCH(page, 0x10000); +DECLARE_ADDR_MATCH(col, 0x4000); + +ATTR_ADDR_MATCH(channel); +ATTR_ADDR_MATCH(dimm); +ATTR_ADDR_MATCH(rank); +ATTR_ADDR_MATCH(bank); +ATTR_ADDR_MATCH(page); +ATTR_ADDR_MATCH(col); + +static int write_and_test(struct pci_dev *dev, const int where, const u32 val) +{ + u32 read; + int count; + + edac_dbg(0, "setting pci %02x:%02x.%x reg=%02x value=%08x\n", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), + where, val); + + for (count = 0; count < 10; count++) { + if (count) + msleep(100); + pci_write_config_dword(dev, where, val); + pci_read_config_dword(dev, where, &read); + + if (read == val) + return 0; + } + + i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x " + "write=%08x. Read=%08x\n", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn), + where, val, read); + + return -EINVAL; +} + +/* + * This routine prepares the Memory Controller for error injection. + * The error will be injected when some process tries to write to the + * memory that matches the given criteria. + * The criteria can be set in terms of a mask where dimm, rank, bank, page + * and col can be specified. + * A -1 value for any of the mask items will make the MCU to ignore + * that matching criteria for error injection. + * + * It should be noticed that the error will only happen after a write operation + * on a memory that matches the condition. if REPEAT_EN is not enabled at + * inject mask, then it will produce just one error. Otherwise, it will repeat + * until the injectmask would be cleaned. + * + * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD + * is reliable enough to check if the MC is using the + * three channels. However, this is not clear at the datasheet. + */ +static ssize_t i7core_inject_enable_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + u32 injectmask; + u64 mask = 0; + int rc; + long enable; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return 0; + + rc = kstrtoul(data, 10, &enable); + if ((rc < 0)) + return 0; + + if (enable) { + pvt->inject.enable = 1; + } else { + disable_inject(mci); + return count; + } + + /* Sets pvt->inject.dimm mask */ + if (pvt->inject.dimm < 0) + mask |= 1LL << 41; + else { + if (pvt->channel[pvt->inject.channel].dimms > 2) + mask |= (pvt->inject.dimm & 0x3LL) << 35; + else + mask |= (pvt->inject.dimm & 0x1LL) << 36; + } + + /* Sets pvt->inject.rank mask */ + if (pvt->inject.rank < 0) + mask |= 1LL << 40; + else { + if (pvt->channel[pvt->inject.channel].dimms > 2) + mask |= (pvt->inject.rank & 0x1LL) << 34; + else + mask |= (pvt->inject.rank & 0x3LL) << 34; + } + + /* Sets pvt->inject.bank mask */ + if (pvt->inject.bank < 0) + mask |= 1LL << 39; + else + mask |= (pvt->inject.bank & 0x15LL) << 30; + + /* Sets pvt->inject.page mask */ + if (pvt->inject.page < 0) + mask |= 1LL << 38; + else + mask |= (pvt->inject.page & 0xffff) << 14; + + /* Sets pvt->inject.column mask */ + if (pvt->inject.col < 0) + mask |= 1LL << 37; + else + mask |= (pvt->inject.col & 0x3fff); + + /* + * bit 0: REPEAT_EN + * bits 1-2: MASK_HALF_CACHELINE + * bit 3: INJECT_ECC + * bit 4: INJECT_ADDR_PARITY + */ + + injectmask = (pvt->inject.type & 1) | + (pvt->inject.section & 0x3) << 1 | + (pvt->inject.type & 0x6) << (3 - 1); + + /* Unlock writes to registers - this register is write only */ + pci_write_config_dword(pvt->pci_noncore, + MC_CFG_CONTROL, 0x2); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ADDR_MATCH, mask); + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask); + + write_and_test(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, injectmask); + + /* + * This is something undocumented, based on my tests + * Without writing 8 to this register, errors aren't injected. Not sure + * why. + */ + pci_write_config_dword(pvt->pci_noncore, + MC_CFG_CONTROL, 8); + + edac_dbg(0, "Error inject addr match 0x%016llx, ecc 0x%08x, inject 0x%08x\n", + mask, pvt->inject.eccmask, injectmask); + + + return count; +} + +static ssize_t i7core_inject_enable_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct i7core_pvt *pvt = mci->pvt_info; + u32 injectmask; + + if (!pvt->pci_ch[pvt->inject.channel][0]) + return 0; + + pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0], + MC_CHANNEL_ERROR_INJECT, &injectmask); + + edac_dbg(0, "Inject error read: 0x%018x\n", injectmask); + + if (injectmask & 0x0c) + pvt->inject.enable = 1; + + return sprintf(data, "%d\n", pvt->inject.enable); +} + +#define DECLARE_COUNTER(param) \ +static ssize_t i7core_show_counter_##param( \ + struct device *dev, \ + struct device_attribute *mattr, \ + char *data) \ +{ \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ + struct i7core_pvt *pvt = mci->pvt_info; \ + \ + edac_dbg(1, "\n"); \ + if (!pvt->ce_count_available || (pvt->is_registered)) \ + return sprintf(data, "data unavailable\n"); \ + return sprintf(data, "%lu\n", \ + pvt->udimm_ce_count[param]); \ +} + +#define ATTR_COUNTER(param) \ + static DEVICE_ATTR(udimm##param, S_IRUGO | S_IWUSR, \ + i7core_show_counter_##param, \ + NULL) + +DECLARE_COUNTER(0); +DECLARE_COUNTER(1); +DECLARE_COUNTER(2); + +ATTR_COUNTER(0); +ATTR_COUNTER(1); +ATTR_COUNTER(2); + +/* + * inject_addrmatch device sysfs struct + */ + +static struct attribute *i7core_addrmatch_attrs[] = { + &dev_attr_channel.attr, + &dev_attr_dimm.attr, + &dev_attr_rank.attr, + &dev_attr_bank.attr, + &dev_attr_page.attr, + &dev_attr_col.attr, + NULL +}; + +static const struct attribute_group addrmatch_grp = { + .attrs = i7core_addrmatch_attrs, +}; + +static const struct attribute_group *addrmatch_groups[] = { + &addrmatch_grp, + NULL +}; + +static void addrmatch_release(struct device *device) +{ + edac_dbg(1, "Releasing device %s\n", dev_name(device)); + kfree(device); +} + +static const struct device_type addrmatch_type = { + .groups = addrmatch_groups, + .release = addrmatch_release, +}; + +/* + * all_channel_counts sysfs struct + */ + +static struct attribute *i7core_udimm_counters_attrs[] = { + &dev_attr_udimm0.attr, + &dev_attr_udimm1.attr, + &dev_attr_udimm2.attr, + NULL +}; + +static const struct attribute_group all_channel_counts_grp = { + .attrs = i7core_udimm_counters_attrs, +}; + +static const struct attribute_group *all_channel_counts_groups[] = { + &all_channel_counts_grp, + NULL +}; + +static void all_channel_counts_release(struct device *device) +{ + edac_dbg(1, "Releasing device %s\n", dev_name(device)); + kfree(device); +} + +static const struct device_type all_channel_counts_type = { + .groups = all_channel_counts_groups, + .release = all_channel_counts_release, +}; + +/* + * inject sysfs attributes + */ + +static DEVICE_ATTR(inject_section, S_IRUGO | S_IWUSR, + i7core_inject_section_show, i7core_inject_section_store); + +static DEVICE_ATTR(inject_type, S_IRUGO | S_IWUSR, + i7core_inject_type_show, i7core_inject_type_store); + + +static DEVICE_ATTR(inject_eccmask, S_IRUGO | S_IWUSR, + i7core_inject_eccmask_show, i7core_inject_eccmask_store); + +static DEVICE_ATTR(inject_enable, S_IRUGO | S_IWUSR, + i7core_inject_enable_show, i7core_inject_enable_store); + +static struct attribute *i7core_dev_attrs[] = { + &dev_attr_inject_section.attr, + &dev_attr_inject_type.attr, + &dev_attr_inject_eccmask.attr, + &dev_attr_inject_enable.attr, + NULL +}; + +ATTRIBUTE_GROUPS(i7core_dev); + +static int i7core_create_sysfs_devices(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + int rc; + + pvt->addrmatch_dev = kzalloc(sizeof(*pvt->addrmatch_dev), GFP_KERNEL); + if (!pvt->addrmatch_dev) + return -ENOMEM; + + pvt->addrmatch_dev->type = &addrmatch_type; + pvt->addrmatch_dev->bus = mci->dev.bus; + device_initialize(pvt->addrmatch_dev); + pvt->addrmatch_dev->parent = &mci->dev; + dev_set_name(pvt->addrmatch_dev, "inject_addrmatch"); + dev_set_drvdata(pvt->addrmatch_dev, mci); + + edac_dbg(1, "creating %s\n", dev_name(pvt->addrmatch_dev)); + + rc = device_add(pvt->addrmatch_dev); + if (rc < 0) + goto err_put_addrmatch; + + if (!pvt->is_registered) { + pvt->chancounts_dev = kzalloc(sizeof(*pvt->chancounts_dev), + GFP_KERNEL); + if (!pvt->chancounts_dev) { + rc = -ENOMEM; + goto err_del_addrmatch; + } + + pvt->chancounts_dev->type = &all_channel_counts_type; + pvt->chancounts_dev->bus = mci->dev.bus; + device_initialize(pvt->chancounts_dev); + pvt->chancounts_dev->parent = &mci->dev; + dev_set_name(pvt->chancounts_dev, "all_channel_counts"); + dev_set_drvdata(pvt->chancounts_dev, mci); + + edac_dbg(1, "creating %s\n", dev_name(pvt->chancounts_dev)); + + rc = device_add(pvt->chancounts_dev); + if (rc < 0) + goto err_put_chancounts; + } + return 0; + +err_put_chancounts: + put_device(pvt->chancounts_dev); +err_del_addrmatch: + device_del(pvt->addrmatch_dev); +err_put_addrmatch: + put_device(pvt->addrmatch_dev); + + return rc; +} + +static void i7core_delete_sysfs_devices(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + + edac_dbg(1, "\n"); + + if (!pvt->is_registered) { + device_del(pvt->chancounts_dev); + put_device(pvt->chancounts_dev); + } + device_del(pvt->addrmatch_dev); + put_device(pvt->addrmatch_dev); +} + +/**************************************************************************** + Device initialization routines: put/get, init/exit + ****************************************************************************/ + +/* + * i7core_put_all_devices 'put' all the devices that we have + * reserved via 'get' + */ +static void i7core_put_devices(struct i7core_dev *i7core_dev) +{ + int i; + + edac_dbg(0, "\n"); + for (i = 0; i < i7core_dev->n_devs; i++) { + struct pci_dev *pdev = i7core_dev->pdev[i]; + if (!pdev) + continue; + edac_dbg(0, "Removing dev %02x:%02x.%d\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + pci_dev_put(pdev); + } +} + +static void i7core_put_all_devices(void) +{ + struct i7core_dev *i7core_dev, *tmp; + + list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) { + i7core_put_devices(i7core_dev); + free_i7core_dev(i7core_dev); + } +} + +static void __init i7core_xeon_pci_fixup(const struct pci_id_table *table) +{ + struct pci_dev *pdev = NULL; + int i; + + /* + * On Xeon 55xx, the Intel Quick Path Arch Generic Non-core pci buses + * aren't announced by acpi. So, we need to use a legacy scan probing + * to detect them + */ + while (table && table->descr) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL); + if (unlikely(!pdev)) { + for (i = 0; i < MAX_SOCKET_BUSES; i++) + pcibios_scan_specific_bus(255-i); + } + pci_dev_put(pdev); + table++; + } +} + +static unsigned i7core_pci_lastbus(void) +{ + int last_bus = 0, bus; + struct pci_bus *b = NULL; + + while ((b = pci_find_next_bus(b)) != NULL) { + bus = b->number; + edac_dbg(0, "Found bus %d\n", bus); + if (bus > last_bus) + last_bus = bus; + } + + edac_dbg(0, "Last bus %d\n", last_bus); + + return last_bus; +} + +/* + * i7core_get_all_devices Find and perform 'get' operation on the MCH's + * device/functions we want to reference for this driver + * + * Need to 'get' device 16 func 1 and func 2 + */ +static int i7core_get_onedevice(struct pci_dev **prev, + const struct pci_id_table *table, + const unsigned devno, + const unsigned last_bus) +{ + struct i7core_dev *i7core_dev; + const struct pci_id_descr *dev_descr = &table->descr[devno]; + + struct pci_dev *pdev = NULL; + u8 bus = 0; + u8 socket = 0; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + dev_descr->dev_id, *prev); + + /* + * On Xeon 55xx, the Intel QuickPath Arch Generic Non-core regs + * is at addr 8086:2c40, instead of 8086:2c41. So, we need + * to probe for the alternate address in case of failure + */ + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev) { + pci_dev_get(*prev); /* pci_get_device will put it */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev); + } + + if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && + !pdev) { + pci_dev_get(*prev); /* pci_get_device will put it */ + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT, + *prev); + } + + if (!pdev) { + if (*prev) { + *prev = pdev; + return 0; + } + + if (dev_descr->optional) + return 0; + + if (devno == 0) + return -ENODEV; + + i7core_printk(KERN_INFO, + "Device not found: dev %02x.%d PCI ID %04x:%04x\n", + dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + /* End of list, leave */ + return -ENODEV; + } + bus = pdev->bus->number; + + socket = last_bus - bus; + + i7core_dev = get_i7core_dev(socket); + if (!i7core_dev) { + i7core_dev = alloc_i7core_dev(socket, table); + if (!i7core_dev) { + pci_dev_put(pdev); + return -ENOMEM; + } + } + + if (i7core_dev->pdev[devno]) { + i7core_printk(KERN_ERR, + "Duplicated device for " + "dev %02x:%02x.%d PCI ID %04x:%04x\n", + bus, dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + pci_dev_put(pdev); + return -ENODEV; + } + + i7core_dev->pdev[devno] = pdev; + + /* Sanity check */ + if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev || + PCI_FUNC(pdev->devfn) != dev_descr->func)) { + i7core_printk(KERN_ERR, + "Device PCI ID %04x:%04x " + "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id, + bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + bus, dev_descr->dev, dev_descr->func); + return -ENODEV; + } + + /* Be sure that the device is enabled */ + if (unlikely(pci_enable_device(pdev) < 0)) { + i7core_printk(KERN_ERR, + "Couldn't enable " + "dev %02x:%02x.%d PCI ID %04x:%04x\n", + bus, dev_descr->dev, dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + return -ENODEV; + } + + edac_dbg(0, "Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n", + socket, bus, dev_descr->dev, + dev_descr->func, + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + /* + * As stated on drivers/pci/search.c, the reference count for + * @from is always decremented if it is not %NULL. So, as we need + * to get all devices up to null, we need to do a get for the device + */ + pci_dev_get(pdev); + + *prev = pdev; + + return 0; +} + +static int i7core_get_all_devices(void) +{ + int i, rc, last_bus; + struct pci_dev *pdev = NULL; + const struct pci_id_table *table = pci_dev_table; + + last_bus = i7core_pci_lastbus(); + + while (table && table->descr) { + for (i = 0; i < table->n_devs; i++) { + pdev = NULL; + do { + rc = i7core_get_onedevice(&pdev, table, i, + last_bus); + if (rc < 0) { + if (i == 0) { + i = table->n_devs; + break; + } + i7core_put_all_devices(); + return -ENODEV; + } + } while (pdev); + } + table++; + } + + return 0; +} + +static int mci_bind_devs(struct mem_ctl_info *mci, + struct i7core_dev *i7core_dev) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + int i, func, slot; + char *family; + + pvt->is_registered = false; + pvt->enable_scrub = false; + for (i = 0; i < i7core_dev->n_devs; i++) { + pdev = i7core_dev->pdev[i]; + if (!pdev) + continue; + + func = PCI_FUNC(pdev->devfn); + slot = PCI_SLOT(pdev->devfn); + if (slot == 3) { + if (unlikely(func > MAX_MCR_FUNC)) + goto error; + pvt->pci_mcr[func] = pdev; + } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) { + if (unlikely(func > MAX_CHAN_FUNC)) + goto error; + pvt->pci_ch[slot - 4][func] = pdev; + } else if (!slot && !func) { + pvt->pci_noncore = pdev; + + /* Detect the processor family */ + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_I7_NONCORE: + family = "Xeon 35xx/ i7core"; + pvt->enable_scrub = false; + break; + case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT: + family = "i7-800/i5-700"; + pvt->enable_scrub = false; + break; + case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE: + family = "Xeon 34xx"; + pvt->enable_scrub = false; + break; + case PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT: + family = "Xeon 55xx"; + pvt->enable_scrub = true; + break; + case PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2: + family = "Xeon 56xx / i7-900"; + pvt->enable_scrub = true; + break; + default: + family = "unknown"; + pvt->enable_scrub = false; + } + edac_dbg(0, "Detected a processor type %s\n", family); + } else + goto error; + + edac_dbg(0, "Associated fn %d.%d, dev = %p, socket %d\n", + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev, i7core_dev->socket); + + if (PCI_SLOT(pdev->devfn) == 3 && + PCI_FUNC(pdev->devfn) == 2) + pvt->is_registered = true; + } + + return 0; + +error: + i7core_printk(KERN_ERR, "Device %d, function %d " + "is out of the expected range\n", + slot, func); + return -EINVAL; +} + +/**************************************************************************** + Error check routines + ****************************************************************************/ + +static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci, + const int chan, + const int new0, + const int new1, + const int new2) +{ + struct i7core_pvt *pvt = mci->pvt_info; + int add0 = 0, add1 = 0, add2 = 0; + /* Updates CE counters if it is not the first time here */ + if (pvt->ce_count_available) { + /* Updates CE counters */ + + add2 = new2 - pvt->rdimm_last_ce_count[chan][2]; + add1 = new1 - pvt->rdimm_last_ce_count[chan][1]; + add0 = new0 - pvt->rdimm_last_ce_count[chan][0]; + + if (add2 < 0) + add2 += 0x7fff; + pvt->rdimm_ce_count[chan][2] += add2; + + if (add1 < 0) + add1 += 0x7fff; + pvt->rdimm_ce_count[chan][1] += add1; + + if (add0 < 0) + add0 += 0x7fff; + pvt->rdimm_ce_count[chan][0] += add0; + } else + pvt->ce_count_available = 1; + + /* Store the new values */ + pvt->rdimm_last_ce_count[chan][2] = new2; + pvt->rdimm_last_ce_count[chan][1] = new1; + pvt->rdimm_last_ce_count[chan][0] = new0; + + /*updated the edac core */ + if (add0 != 0) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add0, + 0, 0, 0, + chan, 0, -1, "error", ""); + if (add1 != 0) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add1, + 0, 0, 0, + chan, 1, -1, "error", ""); + if (add2 != 0) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add2, + 0, 0, 0, + chan, 2, -1, "error", ""); +} + +static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 rcv[3][2]; + int i, new0, new1, new2; + + /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/ + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0, + &rcv[0][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1, + &rcv[0][1]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2, + &rcv[1][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3, + &rcv[1][1]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4, + &rcv[2][0]); + pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5, + &rcv[2][1]); + for (i = 0 ; i < 3; i++) { + edac_dbg(3, "MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n", + (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]); + /*if the channel has 3 dimms*/ + if (pvt->channel[i].dimms > 2) { + new0 = DIMM_BOT_COR_ERR(rcv[i][0]); + new1 = DIMM_TOP_COR_ERR(rcv[i][0]); + new2 = DIMM_BOT_COR_ERR(rcv[i][1]); + } else { + new0 = DIMM_TOP_COR_ERR(rcv[i][0]) + + DIMM_BOT_COR_ERR(rcv[i][0]); + new1 = DIMM_TOP_COR_ERR(rcv[i][1]) + + DIMM_BOT_COR_ERR(rcv[i][1]); + new2 = 0; + } + + i7core_rdimm_update_ce_count(mci, i, new0, new1, new2); + } +} + +/* This function is based on the device 3 function 4 registers as described on: + * Intel Xeon Processor 5500 Series Datasheet Volume 2 + * http://www.intel.com/Assets/PDF/datasheet/321322.pdf + * also available at: + * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf + */ +static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 rcv1, rcv0; + int new0, new1, new2; + + if (!pvt->pci_mcr[4]) { + edac_dbg(0, "MCR registers not found\n"); + return; + } + + /* Corrected test errors */ + pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1); + pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0); + + /* Store the new values */ + new2 = DIMM2_COR_ERR(rcv1); + new1 = DIMM1_COR_ERR(rcv0); + new0 = DIMM0_COR_ERR(rcv0); + + /* Updates CE counters if it is not the first time here */ + if (pvt->ce_count_available) { + /* Updates CE counters */ + int add0, add1, add2; + + add2 = new2 - pvt->udimm_last_ce_count[2]; + add1 = new1 - pvt->udimm_last_ce_count[1]; + add0 = new0 - pvt->udimm_last_ce_count[0]; + + if (add2 < 0) + add2 += 0x7fff; + pvt->udimm_ce_count[2] += add2; + + if (add1 < 0) + add1 += 0x7fff; + pvt->udimm_ce_count[1] += add1; + + if (add0 < 0) + add0 += 0x7fff; + pvt->udimm_ce_count[0] += add0; + + if (add0 | add1 | add2) + i7core_printk(KERN_ERR, "New Corrected error(s): " + "dimm0: +%d, dimm1: +%d, dimm2 +%d\n", + add0, add1, add2); + } else + pvt->ce_count_available = 1; + + /* Store the new values */ + pvt->udimm_last_ce_count[2] = new2; + pvt->udimm_last_ce_count[1] = new1; + pvt->udimm_last_ce_count[0] = new0; +} + +/* + * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32 + * Architectures Software Developer’s Manual Volume 3B. + * Nehalem are defined as family 0x06, model 0x1a + * + * The MCA registers used here are the following ones: + * struct mce field MCA Register + * m->status MSR_IA32_MC8_STATUS + * m->addr MSR_IA32_MC8_ADDR + * m->misc MSR_IA32_MC8_MISC + * In the case of Nehalem, the error information is masked at .status and .misc + * fields + */ +static void i7core_mce_output_error(struct mem_ctl_info *mci, + const struct mce *m) +{ + struct i7core_pvt *pvt = mci->pvt_info; + char *optype, *err; + enum hw_event_mc_err_type tp_event; + unsigned long error = m->status & 0x1ff0000l; + bool uncorrected_error = m->mcgstatus & 1ll << 61; + bool ripv = m->mcgstatus & 1; + u32 optypenum = (m->status >> 4) & 0x07; + u32 core_err_cnt = (m->status >> 38) & 0x7fff; + u32 dimm = (m->misc >> 16) & 0x3; + u32 channel = (m->misc >> 18) & 0x3; + u32 syndrome = m->misc >> 32; + u32 errnum = find_first_bit(&error, 32); + + if (uncorrected_error) { + core_err_cnt = 1; + if (ripv) + tp_event = HW_EVENT_ERR_UNCORRECTED; + else + tp_event = HW_EVENT_ERR_FATAL; + } else { + tp_event = HW_EVENT_ERR_CORRECTED; + } + + switch (optypenum) { + case 0: + optype = "generic undef request"; + break; + case 1: + optype = "read error"; + break; + case 2: + optype = "write error"; + break; + case 3: + optype = "addr/cmd error"; + break; + case 4: + optype = "scrubbing error"; + break; + default: + optype = "reserved"; + break; + } + + switch (errnum) { + case 16: + err = "read ECC error"; + break; + case 17: + err = "RAS ECC error"; + break; + case 18: + err = "write parity error"; + break; + case 19: + err = "redundancy loss"; + break; + case 20: + err = "reserved"; + break; + case 21: + err = "memory range error"; + break; + case 22: + err = "RTID out of range"; + break; + case 23: + err = "address parity error"; + break; + case 24: + err = "byte enable parity error"; + break; + default: + err = "unknown"; + } + + /* + * Call the helper to output message + * FIXME: what to do if core_err_cnt > 1? Currently, it generates + * only one event + */ + if (uncorrected_error || !pvt->is_registered) + edac_mc_handle_error(tp_event, mci, core_err_cnt, + m->addr >> PAGE_SHIFT, + m->addr & ~PAGE_MASK, + syndrome, + channel, dimm, -1, + err, optype); +} + +/* + * i7core_check_error Retrieve and process errors reported by the + * hardware. Called by the Core module. + */ +static void i7core_check_error(struct mem_ctl_info *mci, struct mce *m) +{ + struct i7core_pvt *pvt = mci->pvt_info; + + i7core_mce_output_error(mci, m); + + /* + * Now, let's increment CE error counts + */ + if (!pvt->is_registered) + i7core_udimm_check_mc_ecc_err(mci); + else + i7core_rdimm_check_mc_ecc_err(mci); +} + +/* + * Check that logging is enabled and that this is the right type + * of error for us to handle. + */ +static int i7core_mce_check_error(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct mce *mce = (struct mce *)data; + struct i7core_dev *i7_dev; + struct mem_ctl_info *mci; + + i7_dev = get_i7core_dev(mce->socketid); + if (!i7_dev || (mce->kflags & MCE_HANDLED_CEC)) + return NOTIFY_DONE; + + mci = i7_dev->mci; + + /* + * Just let mcelog handle it if the error is + * outside the memory controller + */ + if (((mce->status & 0xffff) >> 7) != 1) + return NOTIFY_DONE; + + /* Bank 8 registers are the only ones that we know how to handle */ + if (mce->bank != 8) + return NOTIFY_DONE; + + i7core_check_error(mci, mce); + + /* Advise mcelog that the errors were handled */ + mce->kflags |= MCE_HANDLED_EDAC; + return NOTIFY_OK; +} + +static struct notifier_block i7_mce_dec = { + .notifier_call = i7core_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +struct memdev_dmi_entry { + u8 type; + u8 length; + u16 handle; + u16 phys_mem_array_handle; + u16 mem_err_info_handle; + u16 total_width; + u16 data_width; + u16 size; + u8 form; + u8 device_set; + u8 device_locator; + u8 bank_locator; + u8 memory_type; + u16 type_detail; + u16 speed; + u8 manufacturer; + u8 serial_number; + u8 asset_tag; + u8 part_number; + u8 attributes; + u32 extended_size; + u16 conf_mem_clk_speed; +} __attribute__((__packed__)); + + +/* + * Decode the DRAM Clock Frequency, be paranoid, make sure that all + * memory devices show the same speed, and if they don't then consider + * all speeds to be invalid. + */ +static void decode_dclk(const struct dmi_header *dh, void *_dclk_freq) +{ + int *dclk_freq = _dclk_freq; + u16 dmi_mem_clk_speed; + + if (*dclk_freq == -1) + return; + + if (dh->type == DMI_ENTRY_MEM_DEVICE) { + struct memdev_dmi_entry *memdev_dmi_entry = + (struct memdev_dmi_entry *)dh; + unsigned long conf_mem_clk_speed_offset = + (unsigned long)&memdev_dmi_entry->conf_mem_clk_speed - + (unsigned long)&memdev_dmi_entry->type; + unsigned long speed_offset = + (unsigned long)&memdev_dmi_entry->speed - + (unsigned long)&memdev_dmi_entry->type; + + /* Check that a DIMM is present */ + if (memdev_dmi_entry->size == 0) + return; + + /* + * Pick the configured speed if it's available, otherwise + * pick the DIMM speed, or we don't have a speed. + */ + if (memdev_dmi_entry->length > conf_mem_clk_speed_offset) { + dmi_mem_clk_speed = + memdev_dmi_entry->conf_mem_clk_speed; + } else if (memdev_dmi_entry->length > speed_offset) { + dmi_mem_clk_speed = memdev_dmi_entry->speed; + } else { + *dclk_freq = -1; + return; + } + + if (*dclk_freq == 0) { + /* First pass, speed was 0 */ + if (dmi_mem_clk_speed > 0) { + /* Set speed if a valid speed is read */ + *dclk_freq = dmi_mem_clk_speed; + } else { + /* Otherwise we don't have a valid speed */ + *dclk_freq = -1; + } + } else if (*dclk_freq > 0 && + *dclk_freq != dmi_mem_clk_speed) { + /* + * If we have a speed, check that all DIMMS are the same + * speed, otherwise set the speed as invalid. + */ + *dclk_freq = -1; + } + } +} + +/* + * The default DCLK frequency is used as a fallback if we + * fail to find anything reliable in the DMI. The value + * is taken straight from the datasheet. + */ +#define DEFAULT_DCLK_FREQ 800 + +static int get_dclk_freq(void) +{ + int dclk_freq = 0; + + dmi_walk(decode_dclk, (void *)&dclk_freq); + + if (dclk_freq < 1) + return DEFAULT_DCLK_FREQ; + + return dclk_freq; +} + +/* + * set_sdram_scrub_rate This routine sets byte/sec bandwidth scrub rate + * to hardware according to SCRUBINTERVAL formula + * found in datasheet. + */ +static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + u32 dw_scrub; + u32 dw_ssr; + + /* Get data from the MC register, function 2 */ + pdev = pvt->pci_mcr[2]; + if (!pdev) + return -ENODEV; + + pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &dw_scrub); + + if (new_bw == 0) { + /* Prepare to disable petrol scrub */ + dw_scrub &= ~STARTSCRUB; + /* Stop the patrol scrub engine */ + write_and_test(pdev, MC_SCRUB_CONTROL, + dw_scrub & ~SCRUBINTERVAL_MASK); + + /* Get current status of scrub rate and set bit to disable */ + pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr); + dw_ssr &= ~SSR_MODE_MASK; + dw_ssr |= SSR_MODE_DISABLE; + } else { + const int cache_line_size = 64; + const u32 freq_dclk_mhz = pvt->dclk_freq; + unsigned long long scrub_interval; + /* + * Translate the desired scrub rate to a register value and + * program the corresponding register value. + */ + scrub_interval = (unsigned long long)freq_dclk_mhz * + cache_line_size * 1000000; + do_div(scrub_interval, new_bw); + + if (!scrub_interval || scrub_interval > SCRUBINTERVAL_MASK) + return -EINVAL; + + dw_scrub = SCRUBINTERVAL_MASK & scrub_interval; + + /* Start the patrol scrub engine */ + pci_write_config_dword(pdev, MC_SCRUB_CONTROL, + STARTSCRUB | dw_scrub); + + /* Get current status of scrub rate and set bit to enable */ + pci_read_config_dword(pdev, MC_SSRCONTROL, &dw_ssr); + dw_ssr &= ~SSR_MODE_MASK; + dw_ssr |= SSR_MODE_ENABLE; + } + /* Disable or enable scrubbing */ + pci_write_config_dword(pdev, MC_SSRCONTROL, dw_ssr); + + return new_bw; +} + +/* + * get_sdram_scrub_rate This routine convert current scrub rate value + * into byte/sec bandwidth according to + * SCRUBINTERVAL formula found in datasheet. + */ +static int get_sdram_scrub_rate(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + const u32 cache_line_size = 64; + const u32 freq_dclk_mhz = pvt->dclk_freq; + unsigned long long scrub_rate; + u32 scrubval; + + /* Get data from the MC register, function 2 */ + pdev = pvt->pci_mcr[2]; + if (!pdev) + return -ENODEV; + + /* Get current scrub control data */ + pci_read_config_dword(pdev, MC_SCRUB_CONTROL, &scrubval); + + /* Mask highest 8-bits to 0 */ + scrubval &= SCRUBINTERVAL_MASK; + if (!scrubval) + return 0; + + /* Calculate scrub rate value into byte/sec bandwidth */ + scrub_rate = (unsigned long long)freq_dclk_mhz * + 1000000 * cache_line_size; + do_div(scrub_rate, scrubval); + return (int)scrub_rate; +} + +static void enable_sdram_scrub_setting(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 pci_lock; + + /* Unlock writes to pci registers */ + pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock); + pci_lock &= ~0x3; + pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, + pci_lock | MC_CFG_UNLOCK); + + mci->set_sdram_scrub_rate = set_sdram_scrub_rate; + mci->get_sdram_scrub_rate = get_sdram_scrub_rate; +} + +static void disable_sdram_scrub_setting(struct mem_ctl_info *mci) +{ + struct i7core_pvt *pvt = mci->pvt_info; + u32 pci_lock; + + /* Lock writes to pci registers */ + pci_read_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, &pci_lock); + pci_lock &= ~0x3; + pci_write_config_dword(pvt->pci_noncore, MC_CFG_CONTROL, + pci_lock | MC_CFG_LOCK); +} + +static void i7core_pci_ctl_create(struct i7core_pvt *pvt) +{ + pvt->i7core_pci = edac_pci_create_generic_ctl( + &pvt->i7core_dev->pdev[0]->dev, + EDAC_MOD_STR); + if (unlikely(!pvt->i7core_pci)) + i7core_printk(KERN_WARNING, + "Unable to setup PCI error report via EDAC\n"); +} + +static void i7core_pci_ctl_release(struct i7core_pvt *pvt) +{ + if (likely(pvt->i7core_pci)) + edac_pci_release_generic_ctl(pvt->i7core_pci); + else + i7core_printk(KERN_ERR, + "Couldn't find mem_ctl_info for socket %d\n", + pvt->i7core_dev->socket); + pvt->i7core_pci = NULL; +} + +static void i7core_unregister_mci(struct i7core_dev *i7core_dev) +{ + struct mem_ctl_info *mci = i7core_dev->mci; + struct i7core_pvt *pvt; + + if (unlikely(!mci || !mci->pvt_info)) { + edac_dbg(0, "MC: dev = %p\n", &i7core_dev->pdev[0]->dev); + + i7core_printk(KERN_ERR, "Couldn't find mci handler\n"); + return; + } + + pvt = mci->pvt_info; + + edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev); + + /* Disable scrubrate setting */ + if (pvt->enable_scrub) + disable_sdram_scrub_setting(mci); + + /* Disable EDAC polling */ + i7core_pci_ctl_release(pvt); + + /* Remove MC sysfs nodes */ + i7core_delete_sysfs_devices(mci); + edac_mc_del_mc(mci->pdev); + + edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); + kfree(mci->ctl_name); + edac_mc_free(mci); + i7core_dev->mci = NULL; +} + +static int i7core_register_mci(struct i7core_dev *i7core_dev) +{ + struct mem_ctl_info *mci; + struct i7core_pvt *pvt; + int rc; + struct edac_mc_layer layers[2]; + + /* allocate a new MC control structure */ + + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = NUM_CHANS; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = MAX_DIMMS; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(i7core_dev->socket, ARRAY_SIZE(layers), layers, + sizeof(*pvt)); + if (unlikely(!mci)) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p, dev = %p\n", mci, &i7core_dev->pdev[0]->dev); + + pvt = mci->pvt_info; + memset(pvt, 0, sizeof(*pvt)); + + /* Associates i7core_dev and mci for future usage */ + pvt->i7core_dev = i7core_dev; + i7core_dev->mci = mci; + + /* + * FIXME: how to handle RDDR3 at MCI level? It is possible to have + * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different + * memory channels + */ + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "i7core_edac.c"; + + mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d", i7core_dev->socket); + if (!mci->ctl_name) { + rc = -ENOMEM; + goto fail1; + } + + mci->dev_name = pci_name(i7core_dev->pdev[0]); + mci->ctl_page_to_phys = NULL; + + /* Store pci devices at mci for faster access */ + rc = mci_bind_devs(mci, i7core_dev); + if (unlikely(rc < 0)) + goto fail0; + + + /* Get dimm basic config */ + get_dimm_config(mci); + /* record ptr to the generic device */ + mci->pdev = &i7core_dev->pdev[0]->dev; + + /* Enable scrubrate setting */ + if (pvt->enable_scrub) + enable_sdram_scrub_setting(mci); + + /* add this new MC control structure to EDAC's list of MCs */ + if (unlikely(edac_mc_add_mc_with_groups(mci, i7core_dev_groups))) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + /* FIXME: perhaps some code should go here that disables error + * reporting if we just enabled it + */ + + rc = -EINVAL; + goto fail0; + } + if (i7core_create_sysfs_devices(mci)) { + edac_dbg(0, "MC: failed to create sysfs nodes\n"); + edac_mc_del_mc(mci->pdev); + rc = -EINVAL; + goto fail0; + } + + /* Default error mask is any memory */ + pvt->inject.channel = 0; + pvt->inject.dimm = -1; + pvt->inject.rank = -1; + pvt->inject.bank = -1; + pvt->inject.page = -1; + pvt->inject.col = -1; + + /* allocating generic PCI control info */ + i7core_pci_ctl_create(pvt); + + /* DCLK for scrub rate setting */ + pvt->dclk_freq = get_dclk_freq(); + + return 0; + +fail0: + kfree(mci->ctl_name); + +fail1: + edac_mc_free(mci); + i7core_dev->mci = NULL; + return rc; +} + +/* + * i7core_probe Probe for ONE instance of device to see if it is + * present. + * return: + * 0 for FOUND a device + * < 0 for error code + */ + +static int i7core_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + int rc, count = 0; + struct i7core_dev *i7core_dev; + + /* get the pci devices we want to reserve for our use */ + mutex_lock(&i7core_edac_lock); + + /* + * All memory controllers are allocated at the first pass. + */ + if (unlikely(probed >= 1)) { + mutex_unlock(&i7core_edac_lock); + return -ENODEV; + } + probed++; + + rc = i7core_get_all_devices(); + if (unlikely(rc < 0)) + goto fail0; + + list_for_each_entry(i7core_dev, &i7core_edac_list, list) { + count++; + rc = i7core_register_mci(i7core_dev); + if (unlikely(rc < 0)) + goto fail1; + } + + /* + * Nehalem-EX uses a different memory controller. However, as the + * memory controller is not visible on some Nehalem/Nehalem-EP, we + * need to indirectly probe via a X58 PCI device. The same devices + * are found on (some) Nehalem-EX. So, on those machines, the + * probe routine needs to return -ENODEV, as the actual Memory + * Controller registers won't be detected. + */ + if (!count) { + rc = -ENODEV; + goto fail1; + } + + i7core_printk(KERN_INFO, + "Driver loaded, %d memory controller(s) found.\n", + count); + + mutex_unlock(&i7core_edac_lock); + return 0; + +fail1: + list_for_each_entry(i7core_dev, &i7core_edac_list, list) + i7core_unregister_mci(i7core_dev); + + i7core_put_all_devices(); +fail0: + mutex_unlock(&i7core_edac_lock); + return rc; +} + +/* + * i7core_remove destructor for one instance of device + * + */ +static void i7core_remove(struct pci_dev *pdev) +{ + struct i7core_dev *i7core_dev; + + edac_dbg(0, "\n"); + + /* + * we have a trouble here: pdev value for removal will be wrong, since + * it will point to the X58 register used to detect that the machine + * is a Nehalem or upper design. However, due to the way several PCI + * devices are grouped together to provide MC functionality, we need + * to use a different method for releasing the devices + */ + + mutex_lock(&i7core_edac_lock); + + if (unlikely(!probed)) { + mutex_unlock(&i7core_edac_lock); + return; + } + + list_for_each_entry(i7core_dev, &i7core_edac_list, list) + i7core_unregister_mci(i7core_dev); + + /* Release PCI resources */ + i7core_put_all_devices(); + + probed--; + + mutex_unlock(&i7core_edac_lock); +} + +MODULE_DEVICE_TABLE(pci, i7core_pci_tbl); + +/* + * i7core_driver pci_driver structure for this module + * + */ +static struct pci_driver i7core_driver = { + .name = "i7core_edac", + .probe = i7core_probe, + .remove = i7core_remove, + .id_table = i7core_pci_tbl, +}; + +/* + * i7core_init Module entry function + * Try to initialize this module for its devices + */ +static int __init i7core_init(void) +{ + int pci_rc; + + edac_dbg(2, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + if (use_pci_fixup) + i7core_xeon_pci_fixup(pci_dev_table); + + pci_rc = pci_register_driver(&i7core_driver); + + if (pci_rc >= 0) { + mce_register_decode_chain(&i7_mce_dec); + return 0; + } + + i7core_printk(KERN_ERR, "Failed to register device with error %d.\n", + pci_rc); + + return pci_rc; +} + +/* + * i7core_exit() Module exit function + * Unregister the driver + */ +static void __exit i7core_exit(void) +{ + edac_dbg(2, "\n"); + pci_unregister_driver(&i7core_driver); + mce_unregister_decode_chain(&i7_mce_dec); +} + +module_init(i7core_init); +module_exit(i7core_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_AUTHOR("Red Hat Inc. (https://www.redhat.com)"); +MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - " + I7CORE_REVISION); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c new file mode 100644 index 000000000..933dcf3cf --- /dev/null +++ b/drivers/edac/i82443bxgx_edac.c @@ -0,0 +1,462 @@ +/* + * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel + * module (C) 2006 Tim Small + * + * This file may be distributed under the terms of the GNU General + * Public License. + * + * Written by Tim Small <tim@buttersideup.com>, based on work by Linux + * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and + * others. + * + * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>. + * + * Written with reference to 82443BX Host Bridge Datasheet: + * http://download.intel.com/design/chipsets/datashts/29063301.pdf + * references to this document given in []. + * + * This module doesn't support the 440LX, but it may be possible to + * make it do so (the 440LX's register definitions are different, but + * not completely so - I haven't studied them in enough detail to know + * how easy this would be). + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include <linux/pci.h> +#include <linux/pci_ids.h> + + +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "i82443bxgx_edac" + +/* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory + * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory + * rows" "The 82443BX supports multiple-bit error detection and + * single-bit error correction when ECC mode is enabled and + * single/multi-bit error detection when correction is disabled. + * During writes to the DRAM, the 82443BX generates ECC for the data + * on a QWord basis. Partial QWord writes require a read-modify-write + * cycle when ECC is enabled." +*/ + +/* "Additionally, the 82443BX ensures that the data is corrected in + * main memory so that accumulation of errors is prevented. Another + * error within the same QWord would result in a double-bit error + * which is unrecoverable. This is known as hardware scrubbing since + * it requires no software intervention to correct the data in memory." + */ + +/* [Also see page 100 (section 4.3), "DRAM Interface"] + * [Also see page 112 (section 4.6.1.4), ECC] + */ + +#define I82443BXGX_NR_CSROWS 8 +#define I82443BXGX_NR_CHANS 1 +#define I82443BXGX_NR_DIMMS 4 + +/* 82443 PCI Device 0 */ +#define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI + * config space offset */ +#define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if + * row is non-ECC */ +#define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */ + +#define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */ +#define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */ +#define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */ +#define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */ +#define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */ + +#define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6 + +/* 82443 PCI Device 0 */ +#define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI + * config space offset, Error Address + * Pointer Register */ +#define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */ +#define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */ +#define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC) */ + +#define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */ +#define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */ + +#define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */ +#define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */ +#define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */ +#define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */ + +#define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI + * config space offset. */ +#define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */ +#define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */ +#define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */ +#define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */ + +#define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI + * config space offset. */ + +/* FIXME - don't poll when ECC disabled? */ + +struct i82443bxgx_edacmc_error_info { + u32 eap; +}; + +static struct edac_pci_ctl_info *i82443bxgx_pci; + +static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has + * already registered driver + */ + +static int i82443bxgx_registered = 1; + +static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci, + struct i82443bxgx_edacmc_error_info + *info) +{ + struct pci_dev *pdev; + pdev = to_pci_dev(mci->pdev); + pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap); + if (info->eap & I82443BXGX_EAP_OFFSET_SBE) + /* Clear error to allow next error to be reported [p.61] */ + pci_write_bits32(pdev, I82443BXGX_EAP, + I82443BXGX_EAP_OFFSET_SBE, + I82443BXGX_EAP_OFFSET_SBE); + + if (info->eap & I82443BXGX_EAP_OFFSET_MBE) + /* Clear error to allow next error to be reported [p.61] */ + pci_write_bits32(pdev, I82443BXGX_EAP, + I82443BXGX_EAP_OFFSET_MBE, + I82443BXGX_EAP_OFFSET_MBE); +} + +static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci, + struct + i82443bxgx_edacmc_error_info + *info, int handle_errors) +{ + int error_found = 0; + u32 eapaddr, page, pageoffset; + + /* bits 30:12 hold the 4kb block in which the error occurred + * [p.61] */ + eapaddr = (info->eap & 0xfffff000); + page = eapaddr >> PAGE_SHIFT; + pageoffset = eapaddr - (page << PAGE_SHIFT); + + if (info->eap & I82443BXGX_EAP_OFFSET_SBE) { + error_found = 1; + if (handle_errors) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + page, pageoffset, 0, + edac_mc_find_csrow_by_page(mci, page), + 0, -1, mci->ctl_name, ""); + } + + if (info->eap & I82443BXGX_EAP_OFFSET_MBE) { + error_found = 1; + if (handle_errors) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + page, pageoffset, 0, + edac_mc_find_csrow_by_page(mci, page), + 0, -1, mci->ctl_name, ""); + } + + return error_found; +} + +static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci) +{ + struct i82443bxgx_edacmc_error_info info; + + i82443bxgx_edacmc_get_error_info(mci, &info); + i82443bxgx_edacmc_process_error_info(mci, &info, 1); +} + +static void i82443bxgx_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, + enum edac_type edac_mode, + enum mem_type mtype) +{ + struct csrow_info *csrow; + struct dimm_info *dimm; + int index; + u8 drbar, dramc; + u32 row_base, row_high_limit, row_high_limit_last; + + pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc); + row_high_limit_last = 0; + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar); + edac_dbg(1, "MC%d: Row=%d DRB = %#0x\n", + mci->mc_idx, index, drbar); + row_high_limit = ((u32) drbar << 23); + /* find the DRAM Chip Select Base address and mask */ + edac_dbg(1, "MC%d: Row=%d, Boundary Address=%#0x, Last = %#0x\n", + mci->mc_idx, index, row_high_limit, + row_high_limit_last); + + /* 440GX goes to 2GB, represented with a DRB of 0. */ + if (row_high_limit_last && !row_high_limit) + row_high_limit = 1UL << 31; + + /* This row is empty [p.49] */ + if (row_high_limit == row_high_limit_last) + continue; + row_base = row_high_limit_last; + csrow->first_page = row_base >> PAGE_SHIFT; + csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1; + dimm->nr_pages = csrow->last_page - csrow->first_page + 1; + /* EAP reports in 4kilobyte granularity [61] */ + dimm->grain = 1 << 12; + dimm->mtype = mtype; + /* I don't think 440BX can tell you device type? FIXME? */ + dimm->dtype = DEV_UNKNOWN; + /* Mode is global to all rows on 440BX */ + dimm->edac_mode = edac_mode; + row_high_limit_last = row_high_limit; + } +} + +static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + u8 dramc; + u32 nbxcfg, ecc_mode; + enum mem_type mtype; + enum edac_type edac_mode; + + edac_dbg(0, "MC:\n"); + + /* Something is really hosed if PCI config space reads from + * the MC aren't working. + */ + if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg)) + return -EIO; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = I82443BXGX_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = I82443BXGX_NR_CHANS; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p\n", mci); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc); + switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) { + case I82443BXGX_DRAMC_DRAM_IS_EDO: + mtype = MEM_EDO; + break; + case I82443BXGX_DRAMC_DRAM_IS_SDRAM: + mtype = MEM_SDR; + break; + case I82443BXGX_DRAMC_DRAM_IS_RSDRAM: + mtype = MEM_RDR; + break; + default: + edac_dbg(0, "Unknown/reserved DRAM type value in DRAMC register!\n"); + mtype = -MEM_UNKNOWN; + } + + if ((mtype == MEM_SDR) || (mtype == MEM_RDR)) + mci->edac_cap = mci->edac_ctl_cap; + else + mci->edac_cap = EDAC_FLAG_NONE; + + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg); + ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) & + (BIT(0) | BIT(1))); + + mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB) + ? SCRUB_HW_SRC : SCRUB_NONE; + + switch (ecc_mode) { + case I82443BXGX_NBXCFG_INTEGRITY_NONE: + edac_mode = EDAC_NONE; + break; + case I82443BXGX_NBXCFG_INTEGRITY_EC: + edac_mode = EDAC_EC; + break; + case I82443BXGX_NBXCFG_INTEGRITY_ECC: + case I82443BXGX_NBXCFG_INTEGRITY_SCRUB: + edac_mode = EDAC_SECDED; + break; + default: + edac_dbg(0, "Unknown/reserved ECC state in NBXCFG register!\n"); + edac_mode = EDAC_UNKNOWN; + break; + } + + i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype); + + /* Many BIOSes don't clear error flags on boot, so do this + * here, or we get "phantom" errors occurring at module-load + * time. */ + pci_write_bits32(pdev, I82443BXGX_EAP, + (I82443BXGX_EAP_OFFSET_SBE | + I82443BXGX_EAP_OFFSET_MBE), + (I82443BXGX_EAP_OFFSET_SBE | + I82443BXGX_EAP_OFFSET_MBE)); + + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = "I82443BXGX"; + mci->dev_name = pci_name(pdev); + mci->edac_check = i82443bxgx_edacmc_check; + mci->ctl_page_to_phys = NULL; + + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail; + } + + /* allocating generic PCI control info */ + i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i82443bxgx_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + edac_dbg(3, "MC: success\n"); + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int i82443bxgx_edacmc_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + /* don't need to call pci_enable_device() */ + rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data); + + if (mci_pdev == NULL) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i82443bxgx_edacmc_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (i82443bxgx_pci) + edac_pci_release_generic_ctl(i82443bxgx_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id i82443bxgx_pci_tbl[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)}, + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)}, + {0,} /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl); + +static struct pci_driver i82443bxgx_edacmc_driver = { + .name = EDAC_MOD_STR, + .probe = i82443bxgx_edacmc_init_one, + .remove = i82443bxgx_edacmc_remove_one, + .id_table = i82443bxgx_pci_tbl, +}; + +static int __init i82443bxgx_edacmc_init(void) +{ + int pci_rc; + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver); + if (pci_rc < 0) + goto fail0; + + if (mci_pdev == NULL) { + const struct pci_device_id *id = &i82443bxgx_pci_tbl[0]; + int i = 0; + i82443bxgx_registered = 0; + + while (mci_pdev == NULL && id->vendor != 0) { + mci_pdev = pci_get_device(id->vendor, + id->device, NULL); + i++; + id = &i82443bxgx_pci_tbl[i]; + } + if (!mci_pdev) { + edac_dbg(0, "i82443bxgx pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl); + + if (pci_rc < 0) { + edac_dbg(0, "i82443bxgx init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i82443bxgx_edacmc_driver); + +fail0: + pci_dev_put(mci_pdev); + return pci_rc; +} + +static void __exit i82443bxgx_edacmc_exit(void) +{ + pci_unregister_driver(&i82443bxgx_edacmc_driver); + + if (!i82443bxgx_registered) + i82443bxgx_edacmc_remove_one(mci_pdev); + + pci_dev_put(mci_pdev); +} + +module_init(i82443bxgx_edacmc_init); +module_exit(i82443bxgx_edacmc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD"); +MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i82860_edac.c b/drivers/edac/i82860_edac.c new file mode 100644 index 000000000..fbec90d00 --- /dev/null +++ b/drivers/edac/i82860_edac.c @@ -0,0 +1,363 @@ +/* + * Intel 82860 Memory Controller kernel module + * (C) 2005 Red Hat (http://www.redhat.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Ben Woodard <woodard@redhat.com> + * shamelessly copied from and based upon the edac_i82875 driver + * by Thayne Harbaugh of Linux Networx. (http://lnxi.com) + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "i82860_edac" + +#define i82860_printk(level, fmt, arg...) \ + edac_printk(level, "i82860", fmt, ##arg) + +#define i82860_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i82860", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_82860_0 +#define PCI_DEVICE_ID_INTEL_82860_0 0x2531 +#endif /* PCI_DEVICE_ID_INTEL_82860_0 */ + +#define I82860_MCHCFG 0x50 +#define I82860_GBA 0x60 +#define I82860_GBA_MASK 0x7FF +#define I82860_GBA_SHIFT 24 +#define I82860_ERRSTS 0xC8 +#define I82860_EAP 0xE4 +#define I82860_DERRCTL_STS 0xE2 + +enum i82860_chips { + I82860 = 0, +}; + +struct i82860_dev_info { + const char *ctl_name; +}; + +struct i82860_error_info { + u16 errsts; + u32 eap; + u16 derrsyn; + u16 errsts2; +}; + +static const struct i82860_dev_info i82860_devs[] = { + [I82860] = { + .ctl_name = "i82860"}, +}; + +static struct pci_dev *mci_pdev; /* init dev: in case that AGP code + * has already registered driver + */ +static struct edac_pci_ctl_info *i82860_pci; + +static void i82860_get_error_info(struct mem_ctl_info *mci, + struct i82860_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts); + pci_read_config_dword(pdev, I82860_EAP, &info->eap); + pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn); + pci_read_config_word(pdev, I82860_ERRSTS, &info->errsts2); + + pci_write_bits16(pdev, I82860_ERRSTS, 0x0003, 0x0003); + + /* + * If the error is the same for both reads then the first set of reads + * is valid. If there is a change then there is a CE no info and the + * second set of reads is valid and should be UE info. + */ + if (!(info->errsts2 & 0x0003)) + return; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + pci_read_config_dword(pdev, I82860_EAP, &info->eap); + pci_read_config_word(pdev, I82860_DERRCTL_STS, &info->derrsyn); + } +} + +static int i82860_process_error_info(struct mem_ctl_info *mci, + struct i82860_error_info *info, + int handle_errors) +{ + struct dimm_info *dimm; + int row; + + if (!(info->errsts2 & 0x0003)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + info->eap >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, info->eap); + dimm = mci->csrows[row]->channels[0]->dimm; + + if (info->errsts & 0x0002) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + info->eap, 0, 0, + dimm->location[0], dimm->location[1], -1, + "i82860 UE", ""); + else + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + info->eap, 0, info->derrsyn, + dimm->location[0], dimm->location[1], -1, + "i82860 CE", ""); + + return 1; +} + +static void i82860_check(struct mem_ctl_info *mci) +{ + struct i82860_error_info info; + + i82860_get_error_info(mci, &info); + i82860_process_error_info(mci, &info, 1); +} + +static void i82860_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev) +{ + unsigned long last_cumul_size; + u16 mchcfg_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */ + u16 value; + u32 cumul_size; + struct csrow_info *csrow; + struct dimm_info *dimm; + int index; + + pci_read_config_word(pdev, I82860_MCHCFG, &mchcfg_ddim); + mchcfg_ddim = mchcfg_ddim & 0x180; + last_cumul_size = 0; + + /* The group row boundary (GRA) reg values are boundary address + * for each DRAM row with a granularity of 16MB. GRA regs are + * cumulative; therefore GRA15 will contain the total memory contained + * in all eight rows. + */ + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + pci_read_config_word(pdev, I82860_GBA + index * 2, &value); + cumul_size = (value & I82860_GBA_MASK) << + (I82860_GBA_SHIFT - PAGE_SHIFT); + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); + + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + dimm->nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + dimm->grain = 1 << 12; /* I82860_EAP has 4KiB reolution */ + dimm->mtype = MEM_RMBS; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = mchcfg_ddim ? EDAC_SECDED : EDAC_NONE; + } +} + +static int i82860_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct i82860_error_info discard; + + /* + * RDRAM has channels but these don't map onto the csrow abstraction. + * According with the datasheet, there are 2 Rambus channels, supporting + * up to 16 direct RDRAM devices. + * The device groups from the GRA registers seem to map reasonably + * well onto the notion of a chip select row. + * There are 16 GRA registers and since the name is associated with + * the channel and the GRA registers map to physical devices so we are + * going to make 1 channel for group. + */ + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = 2; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = 8; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (!mci) + return -ENOMEM; + + edac_dbg(3, "init mci\n"); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + /* I"m not sure about this but I think that all RDRAM is SECDED */ + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = i82860_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i82860_check; + mci->ctl_page_to_phys = NULL; + i82860_init_csrows(mci, pdev); + i82860_get_error_info(mci, &discard); /* clear counters */ + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail; + } + + /* allocating generic PCI control info */ + i82860_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i82860_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int i82860_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "\n"); + i82860_printk(KERN_INFO, "i82860 init one\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i82860_probe1(pdev, ent->driver_data); + + if (rc == 0) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i82860_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (i82860_pci) + edac_pci_release_generic_ctl(i82860_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id i82860_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 82860_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82860}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82860_pci_tbl); + +static struct pci_driver i82860_driver = { + .name = EDAC_MOD_STR, + .probe = i82860_init_one, + .remove = i82860_remove_one, + .id_table = i82860_pci_tbl, +}; + +static int __init i82860_init(void) +{ + int pci_rc; + + edac_dbg(3, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + if ((pci_rc = pci_register_driver(&i82860_driver)) < 0) + goto fail0; + + if (!mci_pdev) { + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82860_0, NULL); + + if (mci_pdev == NULL) { + edac_dbg(0, "860 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i82860_init_one(mci_pdev, i82860_pci_tbl); + + if (pci_rc < 0) { + edac_dbg(0, "860 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i82860_driver); + +fail0: + pci_dev_put(mci_pdev); + return pci_rc; +} + +static void __exit i82860_exit(void) +{ + edac_dbg(3, "\n"); + pci_unregister_driver(&i82860_driver); + pci_dev_put(mci_pdev); +} + +module_init(i82860_init); +module_exit(i82860_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com) " + "Ben Woodard <woodard@redhat.com>"); +MODULE_DESCRIPTION("ECC support for Intel 82860 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i82875p_edac.c b/drivers/edac/i82875p_edac.c new file mode 100644 index 000000000..553880b9f --- /dev/null +++ b/drivers/edac/i82875p_edac.c @@ -0,0 +1,599 @@ +/* + * Intel D82875P Memory Controller kernel module + * (C) 2003 Linux Networx (http://lnxi.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Thayne Harbaugh + * Contributors: + * Wang Zhenyu at intel.com + * + * $Id: edac_i82875p.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ + * + * Note: E7210 appears same as D82875P - zhenyu.z.wang at intel.com + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "i82875p_edac" + +#define i82875p_printk(level, fmt, arg...) \ + edac_printk(level, "i82875p", fmt, ##arg) + +#define i82875p_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i82875p", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_82875_0 +#define PCI_DEVICE_ID_INTEL_82875_0 0x2578 +#endif /* PCI_DEVICE_ID_INTEL_82875_0 */ + +#ifndef PCI_DEVICE_ID_INTEL_82875_6 +#define PCI_DEVICE_ID_INTEL_82875_6 0x257e +#endif /* PCI_DEVICE_ID_INTEL_82875_6 */ + +/* four csrows in dual channel, eight in single channel */ +#define I82875P_NR_DIMMS 8 +#define I82875P_NR_CSROWS(nr_chans) (I82875P_NR_DIMMS / (nr_chans)) + +/* Intel 82875p register addresses - device 0 function 0 - DRAM Controller */ +#define I82875P_EAP 0x58 /* Error Address Pointer (32b) + * + * 31:12 block address + * 11:0 reserved + */ + +#define I82875P_DERRSYN 0x5c /* DRAM Error Syndrome (8b) + * + * 7:0 DRAM ECC Syndrome + */ + +#define I82875P_DES 0x5d /* DRAM Error Status (8b) + * + * 7:1 reserved + * 0 Error channel 0/1 + */ + +#define I82875P_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15:10 reserved + * 9 non-DRAM lock error (ndlock) + * 8 Sftwr Generated SMI + * 7 ECC UE + * 6 reserved + * 5 MCH detects unimplemented cycle + * 4 AGP access outside GA + * 3 Invalid AGP access + * 2 Invalid GA translation table + * 1 Unsupported AGP command + * 0 ECC CE + */ + +#define I82875P_ERRCMD 0xca /* Error Command (16b) + * + * 15:10 reserved + * 9 SERR on non-DRAM lock + * 8 SERR on ECC UE + * 7 SERR on ECC CE + * 6 target abort on high exception + * 5 detect unimplemented cyc + * 4 AGP access outside of GA + * 3 SERR on invalid AGP access + * 2 invalid translation table + * 1 SERR on unsupported AGP command + * 0 reserved + */ + +/* Intel 82875p register addresses - device 6 function 0 - DRAM Controller */ +#define I82875P_PCICMD6 0x04 /* PCI Command Register (16b) + * + * 15:10 reserved + * 9 fast back-to-back - ro 0 + * 8 SERR enable - ro 0 + * 7 addr/data stepping - ro 0 + * 6 parity err enable - ro 0 + * 5 VGA palette snoop - ro 0 + * 4 mem wr & invalidate - ro 0 + * 3 special cycle - ro 0 + * 2 bus master - ro 0 + * 1 mem access dev6 - 0(dis),1(en) + * 0 IO access dev3 - 0(dis),1(en) + */ + +#define I82875P_BAR6 0x10 /* Mem Delays Base ADDR Reg (32b) + * + * 31:12 mem base addr [31:12] + * 11:4 address mask - ro 0 + * 3 prefetchable - ro 0(non),1(pre) + * 2:1 mem type - ro 0 + * 0 mem space - ro 0 + */ + +/* Intel 82875p MMIO register space - device 0 function 0 - MMR space */ + +#define I82875P_DRB_SHIFT 26 /* 64MiB grain */ +#define I82875P_DRB 0x00 /* DRAM Row Boundary (8b x 8) + * + * 7 reserved + * 6:0 64MiB row boundary addr + */ + +#define I82875P_DRA 0x10 /* DRAM Row Attribute (4b x 8) + * + * 7 reserved + * 6:4 row attr row 1 + * 3 reserved + * 2:0 row attr row 0 + * + * 000 = 4KiB + * 001 = 8KiB + * 010 = 16KiB + * 011 = 32KiB + */ + +#define I82875P_DRC 0x68 /* DRAM Controller Mode (32b) + * + * 31:30 reserved + * 29 init complete + * 28:23 reserved + * 22:21 nr chan 00=1,01=2 + * 20 reserved + * 19:18 Data Integ Mode 00=none,01=ecc + * 17:11 reserved + * 10:8 refresh mode + * 7 reserved + * 6:4 mode select + * 3:2 reserved + * 1:0 DRAM type 01=DDR + */ + +enum i82875p_chips { + I82875P = 0, +}; + +struct i82875p_pvt { + struct pci_dev *ovrfl_pdev; + void __iomem *ovrfl_window; +}; + +struct i82875p_dev_info { + const char *ctl_name; +}; + +struct i82875p_error_info { + u16 errsts; + u32 eap; + u8 des; + u8 derrsyn; + u16 errsts2; +}; + +static const struct i82875p_dev_info i82875p_devs[] = { + [I82875P] = { + .ctl_name = "i82875p"}, +}; + +static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has + * already registered driver + */ + +static struct edac_pci_ctl_info *i82875p_pci; + +static void i82875p_get_error_info(struct mem_ctl_info *mci, + struct i82875p_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts); + + if (!(info->errsts & 0x0081)) + return; + + pci_read_config_dword(pdev, I82875P_EAP, &info->eap); + pci_read_config_byte(pdev, I82875P_DES, &info->des); + pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); + pci_read_config_word(pdev, I82875P_ERRSTS, &info->errsts2); + + /* + * If the error is the same then we can for both reads then + * the first set of reads is valid. If there is a change then + * there is a CE no info and the second set of reads is valid + * and should be UE info. + */ + if ((info->errsts ^ info->errsts2) & 0x0081) { + pci_read_config_dword(pdev, I82875P_EAP, &info->eap); + pci_read_config_byte(pdev, I82875P_DES, &info->des); + pci_read_config_byte(pdev, I82875P_DERRSYN, &info->derrsyn); + } + + pci_write_bits16(pdev, I82875P_ERRSTS, 0x0081, 0x0081); +} + +static int i82875p_process_error_info(struct mem_ctl_info *mci, + struct i82875p_error_info *info, + int handle_errors) +{ + int row, multi_chan; + + multi_chan = mci->csrows[0]->nr_channels - 1; + + if (!(info->errsts & 0x0081)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0081) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, + "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + info->eap >>= PAGE_SHIFT; + row = edac_mc_find_csrow_by_page(mci, info->eap); + + if (info->errsts & 0x0080) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + info->eap, 0, 0, + row, -1, -1, + "i82875p UE", ""); + else + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + info->eap, 0, info->derrsyn, + row, multi_chan ? (info->des & 0x1) : 0, + -1, "i82875p CE", ""); + + return 1; +} + +static void i82875p_check(struct mem_ctl_info *mci) +{ + struct i82875p_error_info info; + + i82875p_get_error_info(mci, &info); + i82875p_process_error_info(mci, &info, 1); +} + +/* Return 0 on success or 1 on failure. */ +static int i82875p_setup_overfl_dev(struct pci_dev *pdev, + struct pci_dev **ovrfl_pdev, + void __iomem **ovrfl_window) +{ + struct pci_dev *dev; + void __iomem *window; + + *ovrfl_pdev = NULL; + *ovrfl_window = NULL; + dev = pci_get_device(PCI_VEND_DEV(INTEL, 82875_6), NULL); + + if (dev == NULL) { + /* Intel tells BIOS developers to hide device 6 which + * configures the overflow device access containing + * the DRBs - this is where we expose device 6. + * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm + */ + pci_write_bits8(pdev, 0xf4, 0x2, 0x2); + dev = pci_scan_single_device(pdev->bus, PCI_DEVFN(6, 0)); + + if (dev == NULL) + return 1; + + pci_bus_assign_resources(dev->bus); + pci_bus_add_device(dev); + } + + *ovrfl_pdev = dev; + + if (pci_enable_device(dev)) { + i82875p_printk(KERN_ERR, "%s(): Failed to enable overflow " + "device\n", __func__); + return 1; + } + + if (pci_request_regions(dev, pci_name(dev))) { +#ifdef CORRECT_BIOS + goto fail0; +#endif + } + + /* cache is irrelevant for PCI bus reads/writes */ + window = pci_ioremap_bar(dev, 0); + if (window == NULL) { + i82875p_printk(KERN_ERR, "%s(): Failed to ioremap bar6\n", + __func__); + goto fail1; + } + + *ovrfl_window = window; + return 0; + +fail1: + pci_release_regions(dev); + +#ifdef CORRECT_BIOS +fail0: + pci_disable_device(dev); +#endif + /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ + return 1; +} + +/* Return 1 if dual channel mode is active. Else return 0. */ +static inline int dual_channel_active(u32 drc) +{ + return (drc >> 21) & 0x1; +} + +static void i82875p_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, + void __iomem * ovrfl_window, u32 drc) +{ + struct csrow_info *csrow; + struct dimm_info *dimm; + unsigned nr_chans = dual_channel_active(drc) + 1; + unsigned long last_cumul_size; + u8 value; + u32 drc_ddim; /* DRAM Data Integrity Mode 0=none,2=edac */ + u32 cumul_size, nr_pages; + int index, j; + + drc_ddim = (drc >> 18) & 0x1; + last_cumul_size = 0; + + /* The dram row boundary (DRB) reg values are boundary address + * for each DRAM row with a granularity of 32 or 64MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all eight rows. + */ + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + + value = readb(ovrfl_window + I82875P_DRB + index); + cumul_size = value << (I82875P_DRB_SHIFT - PAGE_SHIFT); + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); + if (cumul_size == last_cumul_size) + continue; /* not populated */ + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + nr_pages = cumul_size - last_cumul_size; + last_cumul_size = cumul_size; + + for (j = 0; j < nr_chans; j++) { + dimm = csrow->channels[j]->dimm; + + dimm->nr_pages = nr_pages / nr_chans; + dimm->grain = 1 << 12; /* I82875P_EAP has 4KiB reolution */ + dimm->mtype = MEM_DDR; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = drc_ddim ? EDAC_SECDED : EDAC_NONE; + } + } +} + +static int i82875p_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct i82875p_pvt *pvt; + struct pci_dev *ovrfl_pdev; + void __iomem *ovrfl_window; + u32 drc; + u32 nr_chans; + struct i82875p_error_info discard; + + edac_dbg(0, "\n"); + + if (i82875p_setup_overfl_dev(pdev, &ovrfl_pdev, &ovrfl_window)) + return -ENODEV; + drc = readl(ovrfl_window + I82875P_DRC); + nr_chans = dual_channel_active(drc) + 1; + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = I82875P_NR_CSROWS(nr_chans); + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_chans; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (!mci) { + rc = -ENOMEM; + goto fail0; + } + + edac_dbg(3, "init mci\n"); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_UNKNOWN; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = i82875p_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i82875p_check; + mci->ctl_page_to_phys = NULL; + edac_dbg(3, "init pvt\n"); + pvt = (struct i82875p_pvt *)mci->pvt_info; + pvt->ovrfl_pdev = ovrfl_pdev; + pvt->ovrfl_window = ovrfl_window; + i82875p_init_csrows(mci, pdev, ovrfl_window, drc); + i82875p_get_error_info(mci, &discard); /* clear counters */ + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail1; + } + + /* allocating generic PCI control info */ + i82875p_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!i82875p_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + return 0; + +fail1: + edac_mc_free(mci); + +fail0: + iounmap(ovrfl_window); + pci_release_regions(ovrfl_pdev); + + pci_disable_device(ovrfl_pdev); + /* NOTE: the ovrfl proc entry and pci_dev are intentionally left */ + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int i82875p_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "\n"); + i82875p_printk(KERN_INFO, "i82875p init one\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i82875p_probe1(pdev, ent->driver_data); + + if (mci_pdev == NULL) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i82875p_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i82875p_pvt *pvt = NULL; + + edac_dbg(0, "\n"); + + if (i82875p_pci) + edac_pci_release_generic_ctl(i82875p_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + pvt = (struct i82875p_pvt *)mci->pvt_info; + + if (pvt->ovrfl_window) + iounmap(pvt->ovrfl_window); + + if (pvt->ovrfl_pdev) { +#ifdef CORRECT_BIOS + pci_release_regions(pvt->ovrfl_pdev); +#endif /*CORRECT_BIOS */ + pci_disable_device(pvt->ovrfl_pdev); + pci_dev_put(pvt->ovrfl_pdev); + } + + edac_mc_free(mci); +} + +static const struct pci_device_id i82875p_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 82875_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82875P}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl); + +static struct pci_driver i82875p_driver = { + .name = EDAC_MOD_STR, + .probe = i82875p_init_one, + .remove = i82875p_remove_one, + .id_table = i82875p_pci_tbl, +}; + +static int __init i82875p_init(void) +{ + int pci_rc; + + edac_dbg(3, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i82875p_driver); + + if (pci_rc < 0) + goto fail0; + + if (mci_pdev == NULL) { + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82875_0, NULL); + + if (!mci_pdev) { + edac_dbg(0, "875p pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i82875p_init_one(mci_pdev, i82875p_pci_tbl); + + if (pci_rc < 0) { + edac_dbg(0, "875p init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i82875p_driver); + +fail0: + pci_dev_put(mci_pdev); + return pci_rc; +} + +static void __exit i82875p_exit(void) +{ + edac_dbg(3, "\n"); + + i82875p_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + + pci_unregister_driver(&i82875p_driver); + +} + +module_init(i82875p_init); +module_exit(i82875p_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Linux Networx (http://lnxi.com) Thayne Harbaugh"); +MODULE_DESCRIPTION("MC support for Intel 82875 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c new file mode 100644 index 000000000..d99f00583 --- /dev/null +++ b/drivers/edac/i82975x_edac.c @@ -0,0 +1,706 @@ +/* + * Intel 82975X Memory Controller kernel module + * (C) 2007 aCarLab (India) Pvt. Ltd. (http://acarlab.com) + * (C) 2007 jetzbroadband (http://jetzbroadband.com) + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Arvind R. + * Copied from i82875p_edac.c source: + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "i82975x_edac" + +#define i82975x_printk(level, fmt, arg...) \ + edac_printk(level, "i82975x", fmt, ##arg) + +#define i82975x_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "i82975x", fmt, ##arg) + +#ifndef PCI_DEVICE_ID_INTEL_82975_0 +#define PCI_DEVICE_ID_INTEL_82975_0 0x277c +#endif /* PCI_DEVICE_ID_INTEL_82975_0 */ + +#define I82975X_NR_DIMMS 8 +#define I82975X_NR_CSROWS(nr_chans) (I82975X_NR_DIMMS / (nr_chans)) + +/* Intel 82975X register addresses - device 0 function 0 - DRAM Controller */ +#define I82975X_EAP 0x58 /* Dram Error Address Pointer (32b) + * + * 31:7 128 byte cache-line address + * 6:1 reserved + * 0 0: CH0; 1: CH1 + */ + +#define I82975X_DERRSYN 0x5c /* Dram Error SYNdrome (8b) + * + * 7:0 DRAM ECC Syndrome + */ + +#define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b) + * 0h: Processor Memory Reads + * 1h:7h reserved + * More - See Page 65 of Intel DocSheet. + */ + +#define I82975X_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15:12 reserved + * 11 Thermal Sensor Event + * 10 reserved + * 9 non-DRAM lock error (ndlock) + * 8 Refresh Timeout + * 7:2 reserved + * 1 ECC UE (multibit DRAM error) + * 0 ECC CE (singlebit DRAM error) + */ + +/* Error Reporting is supported by 3 mechanisms: + 1. DMI SERR generation ( ERRCMD ) + 2. SMI DMI generation ( SMICMD ) + 3. SCI DMI generation ( SCICMD ) +NOTE: Only ONE of the three must be enabled +*/ +#define I82975X_ERRCMD 0xca /* Error Command (16b) + * + * 15:12 reserved + * 11 Thermal Sensor Event + * 10 reserved + * 9 non-DRAM lock error (ndlock) + * 8 Refresh Timeout + * 7:2 reserved + * 1 ECC UE (multibit DRAM error) + * 0 ECC CE (singlebit DRAM error) + */ + +#define I82975X_SMICMD 0xcc /* Error Command (16b) + * + * 15:2 reserved + * 1 ECC UE (multibit DRAM error) + * 0 ECC CE (singlebit DRAM error) + */ + +#define I82975X_SCICMD 0xce /* Error Command (16b) + * + * 15:2 reserved + * 1 ECC UE (multibit DRAM error) + * 0 ECC CE (singlebit DRAM error) + */ + +#define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b) + * + * 7:1 reserved + * 0 Bit32 of the Dram Error Address + */ + +#define I82975X_MCHBAR 0x44 /* + * + * 31:14 Base Addr of 16K memory-mapped + * configuration space + * 13:1 reserved + * 0 mem-mapped config space enable + */ + +/* NOTE: Following addresses have to indexed using MCHBAR offset (44h, 32b) */ +/* Intel 82975x memory mapped register space */ + +#define I82975X_DRB_SHIFT 25 /* fixed 32MiB grain */ + +#define I82975X_DRB 0x100 /* DRAM Row Boundary (8b x 8) + * + * 7 set to 1 in highest DRB of + * channel if 4GB in ch. + * 6:2 upper boundary of rank in + * 32MB grains + * 1:0 set to 0 + */ +#define I82975X_DRB_CH0R0 0x100 +#define I82975X_DRB_CH0R1 0x101 +#define I82975X_DRB_CH0R2 0x102 +#define I82975X_DRB_CH0R3 0x103 +#define I82975X_DRB_CH1R0 0x180 +#define I82975X_DRB_CH1R1 0x181 +#define I82975X_DRB_CH1R2 0x182 +#define I82975X_DRB_CH1R3 0x183 + + +#define I82975X_DRA 0x108 /* DRAM Row Attribute (4b x 8) + * defines the PAGE SIZE to be used + * for the rank + * 7 reserved + * 6:4 row attr of odd rank, i.e. 1 + * 3 reserved + * 2:0 row attr of even rank, i.e. 0 + * + * 000 = unpopulated + * 001 = reserved + * 010 = 4KiB + * 011 = 8KiB + * 100 = 16KiB + * others = reserved + */ +#define I82975X_DRA_CH0R01 0x108 +#define I82975X_DRA_CH0R23 0x109 +#define I82975X_DRA_CH1R01 0x188 +#define I82975X_DRA_CH1R23 0x189 + + +#define I82975X_BNKARC 0x10e /* Type of device in each rank - Bank Arch (16b) + * + * 15:8 reserved + * 7:6 Rank 3 architecture + * 5:4 Rank 2 architecture + * 3:2 Rank 1 architecture + * 1:0 Rank 0 architecture + * + * 00 => 4 banks + * 01 => 8 banks + */ +#define I82975X_C0BNKARC 0x10e +#define I82975X_C1BNKARC 0x18e + + + +#define I82975X_DRC 0x120 /* DRAM Controller Mode0 (32b) + * + * 31:30 reserved + * 29 init complete + * 28:11 reserved, according to Intel + * 22:21 number of channels + * 00=1 01=2 in 82875 + * seems to be ECC mode + * bits in 82975 in Asus + * P5W + * 19:18 Data Integ Mode + * 00=none 01=ECC in 82875 + * 10:8 refresh mode + * 7 reserved + * 6:4 mode select + * 3:2 reserved + * 1:0 DRAM type 10=Second Revision + * DDR2 SDRAM + * 00, 01, 11 reserved + */ +#define I82975X_DRC_CH0M0 0x120 +#define I82975X_DRC_CH1M0 0x1A0 + + +#define I82975X_DRC_M1 0x124 /* DRAM Controller Mode1 (32b) + * 31 0=Standard Address Map + * 1=Enhanced Address Map + * 30:0 reserved + */ + +#define I82975X_DRC_CH0M1 0x124 +#define I82975X_DRC_CH1M1 0x1A4 + +enum i82975x_chips { + I82975X = 0, +}; + +struct i82975x_pvt { + void __iomem *mch_window; +}; + +struct i82975x_dev_info { + const char *ctl_name; +}; + +struct i82975x_error_info { + u16 errsts; + u32 eap; + u8 des; + u8 derrsyn; + u16 errsts2; + u8 chan; /* the channel is bit 0 of EAP */ + u8 xeap; /* extended eap bit */ +}; + +static const struct i82975x_dev_info i82975x_devs[] = { + [I82975X] = { + .ctl_name = "i82975x" + }, +}; + +static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has + * already registered driver + */ + +static int i82975x_registered = 1; + +static void i82975x_get_error_info(struct mem_ctl_info *mci, + struct i82975x_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts); + pci_read_config_dword(pdev, I82975X_EAP, &info->eap); + pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); + pci_read_config_byte(pdev, I82975X_DES, &info->des); + pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn); + pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2); + + pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003); + + /* + * If the error is the same then we can for both reads then + * the first set of reads is valid. If there is a change then + * there is a CE no info and the second set of reads is valid + * and should be UE info. + */ + if (!(info->errsts2 & 0x0003)) + return; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + pci_read_config_dword(pdev, I82975X_EAP, &info->eap); + pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap); + pci_read_config_byte(pdev, I82975X_DES, &info->des); + pci_read_config_byte(pdev, I82975X_DERRSYN, + &info->derrsyn); + } +} + +static int i82975x_process_error_info(struct mem_ctl_info *mci, + struct i82975x_error_info *info, int handle_errors) +{ + int row, chan; + unsigned long offst, page; + + if (!(info->errsts2 & 0x0003)) + return 0; + + if (!handle_errors) + return 1; + + if ((info->errsts ^ info->errsts2) & 0x0003) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + page = (unsigned long) info->eap; + page >>= 1; + if (info->xeap & 1) + page |= 0x80000000; + page >>= (PAGE_SHIFT - 1); + row = edac_mc_find_csrow_by_page(mci, page); + + if (row == -1) { + i82975x_mc_printk(mci, KERN_ERR, "error processing EAP:\n" + "\tXEAP=%u\n" + "\t EAP=0x%08x\n" + "\tPAGE=0x%08x\n", + (info->xeap & 1) ? 1 : 0, info->eap, (unsigned int) page); + return 0; + } + chan = (mci->csrows[row]->nr_channels == 1) ? 0 : info->eap & 1; + offst = info->eap + & ((1 << PAGE_SHIFT) - + (1 << mci->csrows[row]->channels[chan]->dimm->grain)); + + if (info->errsts & 0x0002) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + page, offst, 0, + row, -1, -1, + "i82975x UE", ""); + else + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + page, offst, info->derrsyn, + row, chan ? chan : 0, -1, + "i82975x CE", ""); + + return 1; +} + +static void i82975x_check(struct mem_ctl_info *mci) +{ + struct i82975x_error_info info; + + i82975x_get_error_info(mci, &info); + i82975x_process_error_info(mci, &info, 1); +} + +/* Return 1 if dual channel mode is active. Else return 0. */ +static int dual_channel_active(void __iomem *mch_window) +{ + /* + * We treat interleaved-symmetric configuration as dual-channel - EAP's + * bit-0 giving the channel of the error location. + * + * All other configurations are treated as single channel - the EAP's + * bit-0 will resolve ok in symmetric area of mixed + * (symmetric/asymmetric) configurations + */ + u8 drb[4][2]; + int row; + int dualch; + + for (dualch = 1, row = 0; dualch && (row < 4); row++) { + drb[row][0] = readb(mch_window + I82975X_DRB + row); + drb[row][1] = readb(mch_window + I82975X_DRB + row + 0x80); + dualch = dualch && (drb[row][0] == drb[row][1]); + } + return dualch; +} + +static void i82975x_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, void __iomem *mch_window) +{ + struct csrow_info *csrow; + unsigned long last_cumul_size; + u8 value; + u32 cumul_size, nr_pages; + int index, chan; + struct dimm_info *dimm; + + last_cumul_size = 0; + + /* + * 82875 comment: + * The dram row boundary (DRB) reg values are boundary address + * for each DRAM row with a granularity of 32 or 64MB (single/dual + * channel operation). DRB regs are cumulative; therefore DRB7 will + * contain the total memory contained in all rows. + * + */ + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + + value = readb(mch_window + I82975X_DRB + index + + ((index >= 4) ? 0x80 : 0)); + cumul_size = value; + cumul_size <<= (I82975X_DRB_SHIFT - PAGE_SHIFT); + /* + * Adjust cumul_size w.r.t number of channels + * + */ + if (csrow->nr_channels > 1) + cumul_size <<= 1; + edac_dbg(3, "(%d) cumul_size 0x%x\n", index, cumul_size); + + nr_pages = cumul_size - last_cumul_size; + if (!nr_pages) + continue; + + /* + * Initialise dram labels + * index values: + * [0-7] for single-channel; i.e. csrow->nr_channels = 1 + * [0-3] for dual-channel; i.e. csrow->nr_channels = 2 + */ + for (chan = 0; chan < csrow->nr_channels; chan++) { + dimm = mci->csrows[index]->channels[chan]->dimm; + + dimm->nr_pages = nr_pages / csrow->nr_channels; + + snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d", + (chan == 0) ? 'A' : 'B', + index); + dimm->grain = 1 << 7; /* 128Byte cache-line resolution */ + + /* ECC is possible on i92975x ONLY with DEV_X8. */ + dimm->dtype = DEV_X8; + + dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ + dimm->edac_mode = EDAC_SECDED; /* only supported */ + } + + csrow->first_page = last_cumul_size; + csrow->last_page = cumul_size - 1; + last_cumul_size = cumul_size; + } +} + +/* #define i82975x_DEBUG_IOMEM */ + +#ifdef i82975x_DEBUG_IOMEM +static void i82975x_print_dram_timings(void __iomem *mch_window) +{ + /* + * The register meanings are from Intel specs; + * (shows 13-5-5-5 for 800-DDR2) + * Asus P5W Bios reports 15-5-4-4 + * What's your religion? + */ + static const int caslats[4] = { 5, 4, 3, 6 }; + u32 dtreg[2]; + + dtreg[0] = readl(mch_window + 0x114); + dtreg[1] = readl(mch_window + 0x194); + i82975x_printk(KERN_INFO, "DRAM Timings : Ch0 Ch1\n" + " RAS Active Min = %d %d\n" + " CAS latency = %d %d\n" + " RAS to CAS = %d %d\n" + " RAS precharge = %d %d\n", + (dtreg[0] >> 19 ) & 0x0f, + (dtreg[1] >> 19) & 0x0f, + caslats[(dtreg[0] >> 8) & 0x03], + caslats[(dtreg[1] >> 8) & 0x03], + ((dtreg[0] >> 4) & 0x07) + 2, + ((dtreg[1] >> 4) & 0x07) + 2, + (dtreg[0] & 0x07) + 2, + (dtreg[1] & 0x07) + 2 + ); + +} +#endif + +static int i82975x_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc = -ENODEV; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct i82975x_pvt *pvt; + void __iomem *mch_window; + u32 mchbar; + u32 drc[2]; + struct i82975x_error_info discard; + int chans; +#ifdef i82975x_DEBUG_IOMEM + u8 c0drb[4]; + u8 c1drb[4]; +#endif + + edac_dbg(0, "\n"); + + pci_read_config_dword(pdev, I82975X_MCHBAR, &mchbar); + if (!(mchbar & 1)) { + edac_dbg(3, "failed, MCHBAR disabled!\n"); + goto fail0; + } + mchbar &= 0xffffc000; /* bits 31:14 used for 16K window */ + mch_window = ioremap(mchbar, 0x1000); + if (!mch_window) { + edac_dbg(3, "error ioremapping MCHBAR!\n"); + goto fail0; + } + +#ifdef i82975x_DEBUG_IOMEM + i82975x_printk(KERN_INFO, "MCHBAR real = %0x, remapped = %p\n", + mchbar, mch_window); + + c0drb[0] = readb(mch_window + I82975X_DRB_CH0R0); + c0drb[1] = readb(mch_window + I82975X_DRB_CH0R1); + c0drb[2] = readb(mch_window + I82975X_DRB_CH0R2); + c0drb[3] = readb(mch_window + I82975X_DRB_CH0R3); + c1drb[0] = readb(mch_window + I82975X_DRB_CH1R0); + c1drb[1] = readb(mch_window + I82975X_DRB_CH1R1); + c1drb[2] = readb(mch_window + I82975X_DRB_CH1R2); + c1drb[3] = readb(mch_window + I82975X_DRB_CH1R3); + i82975x_printk(KERN_INFO, "DRBCH0R0 = 0x%02x\n", c0drb[0]); + i82975x_printk(KERN_INFO, "DRBCH0R1 = 0x%02x\n", c0drb[1]); + i82975x_printk(KERN_INFO, "DRBCH0R2 = 0x%02x\n", c0drb[2]); + i82975x_printk(KERN_INFO, "DRBCH0R3 = 0x%02x\n", c0drb[3]); + i82975x_printk(KERN_INFO, "DRBCH1R0 = 0x%02x\n", c1drb[0]); + i82975x_printk(KERN_INFO, "DRBCH1R1 = 0x%02x\n", c1drb[1]); + i82975x_printk(KERN_INFO, "DRBCH1R2 = 0x%02x\n", c1drb[2]); + i82975x_printk(KERN_INFO, "DRBCH1R3 = 0x%02x\n", c1drb[3]); +#endif + + drc[0] = readl(mch_window + I82975X_DRC_CH0M0); + drc[1] = readl(mch_window + I82975X_DRC_CH1M0); +#ifdef i82975x_DEBUG_IOMEM + i82975x_printk(KERN_INFO, "DRC_CH0 = %0x, %s\n", drc[0], + ((drc[0] >> 21) & 3) == 1 ? + "ECC enabled" : "ECC disabled"); + i82975x_printk(KERN_INFO, "DRC_CH1 = %0x, %s\n", drc[1], + ((drc[1] >> 21) & 3) == 1 ? + "ECC enabled" : "ECC disabled"); + + i82975x_printk(KERN_INFO, "C0 BNKARC = %0x\n", + readw(mch_window + I82975X_C0BNKARC)); + i82975x_printk(KERN_INFO, "C1 BNKARC = %0x\n", + readw(mch_window + I82975X_C1BNKARC)); + i82975x_print_dram_timings(mch_window); + goto fail1; +#endif + if (!(((drc[0] >> 21) & 3) == 1 || ((drc[1] >> 21) & 3) == 1)) { + i82975x_printk(KERN_INFO, "ECC disabled on both channels.\n"); + goto fail1; + } + + chans = dual_channel_active(mch_window) + 1; + + /* assuming only one controller, index thus is 0 */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = I82975X_NR_DIMMS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = I82975X_NR_CSROWS(chans); + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (!mci) { + rc = -ENOMEM; + goto fail1; + } + + edac_dbg(3, "init mci\n"); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = i82975x_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = i82975x_check; + mci->ctl_page_to_phys = NULL; + edac_dbg(3, "init pvt\n"); + pvt = (struct i82975x_pvt *) mci->pvt_info; + pvt->mch_window = mch_window; + i82975x_init_csrows(mci, pdev, mch_window); + mci->scrub_mode = SCRUB_HW_SRC; + i82975x_get_error_info(mci, &discard); /* clear counters */ + + /* finalize this instance of memory controller with edac core */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail2; + } + + /* get this far and it's successful */ + edac_dbg(3, "success\n"); + return 0; + +fail2: + edac_mc_free(mci); + +fail1: + iounmap(mch_window); +fail0: + return rc; +} + +/* returns count (>= 0), or negative on error */ +static int i82975x_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = i82975x_probe1(pdev, ent->driver_data); + + if (mci_pdev == NULL) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void i82975x_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct i82975x_pvt *pvt; + + edac_dbg(0, "\n"); + + mci = edac_mc_del_mc(&pdev->dev); + if (mci == NULL) + return; + + pvt = mci->pvt_info; + if (pvt->mch_window) + iounmap( pvt->mch_window ); + + edac_mc_free(mci); +} + +static const struct pci_device_id i82975x_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, 82975_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + I82975X + }, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, i82975x_pci_tbl); + +static struct pci_driver i82975x_driver = { + .name = EDAC_MOD_STR, + .probe = i82975x_init_one, + .remove = i82975x_remove_one, + .id_table = i82975x_pci_tbl, +}; + +static int __init i82975x_init(void) +{ + int pci_rc; + + edac_dbg(3, "\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&i82975x_driver); + if (pci_rc < 0) + goto fail0; + + if (mci_pdev == NULL) { + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_82975_0, NULL); + + if (!mci_pdev) { + edac_dbg(0, "i82975x pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = i82975x_init_one(mci_pdev, i82975x_pci_tbl); + + if (pci_rc < 0) { + edac_dbg(0, "i82975x init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&i82975x_driver); + +fail0: + pci_dev_put(mci_pdev); + return pci_rc; +} + +static void __exit i82975x_exit(void) +{ + edac_dbg(3, "\n"); + + pci_unregister_driver(&i82975x_driver); + + if (!i82975x_registered) { + i82975x_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(i82975x_init); +module_exit(i82975x_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Arvind R. <arvino55@gmail.com>"); +MODULE_DESCRIPTION("MC support for Intel 82975 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/ie31200_edac.c b/drivers/edac/ie31200_edac.c new file mode 100644 index 000000000..9ef13570f --- /dev/null +++ b/drivers/edac/ie31200_edac.c @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Intel E3-1200 + * Copyright (C) 2014 Jason Baron <jbaron@akamai.com> + * + * Support for the E3-1200 processor family. Heavily based on previous + * Intel EDAC drivers. + * + * Since the DRAM controller is on the cpu chip, we can use its PCI device + * id to identify these processors. + * + * PCI DRAM controller device ids (Taken from The PCI ID Repository - https://pci-ids.ucw.cz/) + * + * 0108: Xeon E3-1200 Processor Family DRAM Controller + * 010c: Xeon E3-1200/2nd Generation Core Processor Family DRAM Controller + * 0150: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller + * 0158: Xeon E3-1200 v2/Ivy Bridge DRAM Controller + * 015c: Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller + * 0c04: Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller + * 0c08: Xeon E3-1200 v3 Processor DRAM Controller + * 1918: Xeon E3-1200 v5 Skylake Host Bridge/DRAM Registers + * 5918: Xeon E3-1200 Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers + * 190f: 6th Gen Core Dual-Core Processor Host Bridge/DRAM Registers + * 191f: 6th Gen Core Quad-Core Processor Host Bridge/DRAM Registers + * 3e..: 8th/9th Gen Core Processor Host Bridge/DRAM Registers + * + * Based on Intel specification: + * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v3-vol-2-datasheet.pdf + * http://www.intel.com/content/www/us/en/processors/xeon/xeon-e3-1200-family-vol-2-datasheet.html + * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/desktop-6th-gen-core-family-datasheet-vol-2.pdf + * https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e3-1200v6-vol-2-datasheet.pdf + * https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-h-processor-lines-datasheet-vol-2.html + * https://www.intel.com/content/www/us/en/products/docs/processors/core/8th-gen-core-family-datasheet-vol-2.html + * + * According to the above datasheet (p.16): + * " + * 6. Software must not access B0/D0/F0 32-bit memory-mapped registers with + * requests that cross a DW boundary. + * " + * + * Thus, we make use of the explicit: lo_hi_readq(), which breaks the readq into + * 2 readl() calls. This restriction may be lifted in subsequent chip releases, + * but lo_hi_readq() ensures that we are safe across all e3-1200 processors. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> + +#include <linux/io-64-nonatomic-lo-hi.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "ie31200_edac" + +#define ie31200_printk(level, fmt, arg...) \ + edac_printk(level, "ie31200", fmt, ##arg) + +#define PCI_DEVICE_ID_INTEL_IE31200_HB_1 0x0108 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_2 0x010c +#define PCI_DEVICE_ID_INTEL_IE31200_HB_3 0x0150 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_4 0x0158 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_5 0x015c +#define PCI_DEVICE_ID_INTEL_IE31200_HB_6 0x0c04 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_7 0x0c08 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_8 0x190F +#define PCI_DEVICE_ID_INTEL_IE31200_HB_9 0x1918 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_10 0x191F +#define PCI_DEVICE_ID_INTEL_IE31200_HB_11 0x5918 + +/* Coffee Lake-S */ +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK 0x3e00 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_1 0x3e0f +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_2 0x3e18 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_3 0x3e1f +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_4 0x3e30 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_5 0x3e31 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_6 0x3e32 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_7 0x3e33 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_8 0x3ec2 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_9 0x3ec6 +#define PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_10 0x3eca + +/* Test if HB is for Skylake or later. */ +#define DEVICE_ID_SKYLAKE_OR_LATER(did) \ + (((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_8) || \ + ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_9) || \ + ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_10) || \ + ((did) == PCI_DEVICE_ID_INTEL_IE31200_HB_11) || \ + (((did) & PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK) == \ + PCI_DEVICE_ID_INTEL_IE31200_HB_CFL_MASK)) + +#define IE31200_DIMMS 4 +#define IE31200_RANKS 8 +#define IE31200_RANKS_PER_CHANNEL 4 +#define IE31200_DIMMS_PER_CHANNEL 2 +#define IE31200_CHANNELS 2 + +/* Intel IE31200 register addresses - device 0 function 0 - DRAM Controller */ +#define IE31200_MCHBAR_LOW 0x48 +#define IE31200_MCHBAR_HIGH 0x4c +#define IE31200_MCHBAR_MASK GENMASK_ULL(38, 15) +#define IE31200_MMR_WINDOW_SIZE BIT(15) + +/* + * Error Status Register (16b) + * + * 15 reserved + * 14 Isochronous TBWRR Run Behind FIFO Full + * (ITCV) + * 13 Isochronous TBWRR Run Behind FIFO Put + * (ITSTV) + * 12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR (GTSE) + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 reserved + * 7 DRAM Throttle Flag (DTF) + * 6:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define IE31200_ERRSTS 0xc8 +#define IE31200_ERRSTS_UE BIT(1) +#define IE31200_ERRSTS_CE BIT(0) +#define IE31200_ERRSTS_BITS (IE31200_ERRSTS_UE | IE31200_ERRSTS_CE) + +/* + * Channel 0 ECC Error Log (64b) + * + * 63:48 Error Column Address (ERRCOL) + * 47:32 Error Row Address (ERRROW) + * 31:29 Error Bank Address (ERRBANK) + * 28:27 Error Rank Address (ERRRANK) + * 26:24 reserved + * 23:16 Error Syndrome (ERRSYND) + * 15: 2 reserved + * 1 Multiple Bit Error Status (MERRSTS) + * 0 Correctable Error Status (CERRSTS) + */ + +#define IE31200_C0ECCERRLOG 0x40c8 +#define IE31200_C1ECCERRLOG 0x44c8 +#define IE31200_C0ECCERRLOG_SKL 0x4048 +#define IE31200_C1ECCERRLOG_SKL 0x4448 +#define IE31200_ECCERRLOG_CE BIT(0) +#define IE31200_ECCERRLOG_UE BIT(1) +#define IE31200_ECCERRLOG_RANK_BITS GENMASK_ULL(28, 27) +#define IE31200_ECCERRLOG_RANK_SHIFT 27 +#define IE31200_ECCERRLOG_SYNDROME_BITS GENMASK_ULL(23, 16) +#define IE31200_ECCERRLOG_SYNDROME_SHIFT 16 + +#define IE31200_ECCERRLOG_SYNDROME(log) \ + ((log & IE31200_ECCERRLOG_SYNDROME_BITS) >> \ + IE31200_ECCERRLOG_SYNDROME_SHIFT) + +#define IE31200_CAPID0 0xe4 +#define IE31200_CAPID0_PDCD BIT(4) +#define IE31200_CAPID0_DDPCD BIT(6) +#define IE31200_CAPID0_ECC BIT(1) + +#define IE31200_MAD_DIMM_0_OFFSET 0x5004 +#define IE31200_MAD_DIMM_0_OFFSET_SKL 0x500C +#define IE31200_MAD_DIMM_SIZE GENMASK_ULL(7, 0) +#define IE31200_MAD_DIMM_A_RANK BIT(17) +#define IE31200_MAD_DIMM_A_RANK_SHIFT 17 +#define IE31200_MAD_DIMM_A_RANK_SKL BIT(10) +#define IE31200_MAD_DIMM_A_RANK_SKL_SHIFT 10 +#define IE31200_MAD_DIMM_A_WIDTH BIT(19) +#define IE31200_MAD_DIMM_A_WIDTH_SHIFT 19 +#define IE31200_MAD_DIMM_A_WIDTH_SKL GENMASK_ULL(9, 8) +#define IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT 8 + +/* Skylake reports 1GB increments, everything else is 256MB */ +#define IE31200_PAGES(n, skl) \ + (n << (28 + (2 * skl) - PAGE_SHIFT)) + +static int nr_channels; +static struct pci_dev *mci_pdev; +static int ie31200_registered = 1; + +struct ie31200_priv { + void __iomem *window; + void __iomem *c0errlog; + void __iomem *c1errlog; +}; + +enum ie31200_chips { + IE31200 = 0, +}; + +struct ie31200_dev_info { + const char *ctl_name; +}; + +struct ie31200_error_info { + u16 errsts; + u16 errsts2; + u64 eccerrlog[IE31200_CHANNELS]; +}; + +static const struct ie31200_dev_info ie31200_devs[] = { + [IE31200] = { + .ctl_name = "IE31200" + }, +}; + +struct dimm_data { + u8 size; /* in multiples of 256MB, except Skylake is 1GB */ + u8 dual_rank : 1, + x16_width : 2; /* 0 means x8 width */ +}; + +static int how_many_channels(struct pci_dev *pdev) +{ + int n_channels; + unsigned char capid0_2b; /* 2nd byte of CAPID0 */ + + pci_read_config_byte(pdev, IE31200_CAPID0 + 1, &capid0_2b); + + /* check PDCD: Dual Channel Disable */ + if (capid0_2b & IE31200_CAPID0_PDCD) { + edac_dbg(0, "In single channel mode\n"); + n_channels = 1; + } else { + edac_dbg(0, "In dual channel mode\n"); + n_channels = 2; + } + + /* check DDPCD - check if both channels are filled */ + if (capid0_2b & IE31200_CAPID0_DDPCD) + edac_dbg(0, "2 DIMMS per channel disabled\n"); + else + edac_dbg(0, "2 DIMMS per channel enabled\n"); + + return n_channels; +} + +static bool ecc_capable(struct pci_dev *pdev) +{ + unsigned char capid0_4b; /* 4th byte of CAPID0 */ + + pci_read_config_byte(pdev, IE31200_CAPID0 + 3, &capid0_4b); + if (capid0_4b & IE31200_CAPID0_ECC) + return false; + return true; +} + +static int eccerrlog_row(u64 log) +{ + return ((log & IE31200_ECCERRLOG_RANK_BITS) >> + IE31200_ECCERRLOG_RANK_SHIFT); +} + +static void ie31200_clear_error_info(struct mem_ctl_info *mci) +{ + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(to_pci_dev(mci->pdev), IE31200_ERRSTS, + IE31200_ERRSTS_BITS, IE31200_ERRSTS_BITS); +} + +static void ie31200_get_and_clear_error_info(struct mem_ctl_info *mci, + struct ie31200_error_info *info) +{ + struct pci_dev *pdev; + struct ie31200_priv *priv = mci->pvt_info; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts); + if (!(info->errsts & IE31200_ERRSTS_BITS)) + return; + + info->eccerrlog[0] = lo_hi_readq(priv->c0errlog); + if (nr_channels == 2) + info->eccerrlog[1] = lo_hi_readq(priv->c1errlog); + + pci_read_config_word(pdev, IE31200_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) { + info->eccerrlog[0] = lo_hi_readq(priv->c0errlog); + if (nr_channels == 2) + info->eccerrlog[1] = + lo_hi_readq(priv->c1errlog); + } + + ie31200_clear_error_info(mci); +} + +static void ie31200_process_error_info(struct mem_ctl_info *mci, + struct ie31200_error_info *info) +{ + int channel; + u64 log; + + if (!(info->errsts & IE31200_ERRSTS_BITS)) + return; + + if ((info->errsts ^ info->errsts2) & IE31200_ERRSTS_BITS) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + for (channel = 0; channel < nr_channels; channel++) { + log = info->eccerrlog[channel]; + if (log & IE31200_ECCERRLOG_UE) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + 0, 0, 0, + eccerrlog_row(log), + channel, -1, + "ie31200 UE", ""); + } else if (log & IE31200_ECCERRLOG_CE) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + 0, 0, + IE31200_ECCERRLOG_SYNDROME(log), + eccerrlog_row(log), + channel, -1, + "ie31200 CE", ""); + } + } +} + +static void ie31200_check(struct mem_ctl_info *mci) +{ + struct ie31200_error_info info; + + ie31200_get_and_clear_error_info(mci, &info); + ie31200_process_error_info(mci, &info); +} + +static void __iomem *ie31200_map_mchbar(struct pci_dev *pdev) +{ + union { + u64 mchbar; + struct { + u32 mchbar_low; + u32 mchbar_high; + }; + } u; + void __iomem *window; + + pci_read_config_dword(pdev, IE31200_MCHBAR_LOW, &u.mchbar_low); + pci_read_config_dword(pdev, IE31200_MCHBAR_HIGH, &u.mchbar_high); + u.mchbar &= IE31200_MCHBAR_MASK; + + if (u.mchbar != (resource_size_t)u.mchbar) { + ie31200_printk(KERN_ERR, "mmio space beyond accessible range (0x%llx)\n", + (unsigned long long)u.mchbar); + return NULL; + } + + window = ioremap(u.mchbar, IE31200_MMR_WINDOW_SIZE); + if (!window) + ie31200_printk(KERN_ERR, "Cannot map mmio space at 0x%llx\n", + (unsigned long long)u.mchbar); + + return window; +} + +static void __skl_populate_dimm_info(struct dimm_data *dd, u32 addr_decode, + int chan) +{ + dd->size = (addr_decode >> (chan << 4)) & IE31200_MAD_DIMM_SIZE; + dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK_SKL << (chan << 4))) ? 1 : 0; + dd->x16_width = ((addr_decode & (IE31200_MAD_DIMM_A_WIDTH_SKL << (chan << 4))) >> + (IE31200_MAD_DIMM_A_WIDTH_SKL_SHIFT + (chan << 4))); +} + +static void __populate_dimm_info(struct dimm_data *dd, u32 addr_decode, + int chan) +{ + dd->size = (addr_decode >> (chan << 3)) & IE31200_MAD_DIMM_SIZE; + dd->dual_rank = (addr_decode & (IE31200_MAD_DIMM_A_RANK << chan)) ? 1 : 0; + dd->x16_width = (addr_decode & (IE31200_MAD_DIMM_A_WIDTH << chan)) ? 1 : 0; +} + +static void populate_dimm_info(struct dimm_data *dd, u32 addr_decode, int chan, + bool skl) +{ + if (skl) + __skl_populate_dimm_info(dd, addr_decode, chan); + else + __populate_dimm_info(dd, addr_decode, chan); +} + + +static int ie31200_probe1(struct pci_dev *pdev, int dev_idx) +{ + int i, j, ret; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL]; + void __iomem *window; + struct ie31200_priv *priv; + u32 addr_decode, mad_offset; + + /* + * Kaby Lake, Coffee Lake seem to work like Skylake. Please re-visit + * this logic when adding new CPU support. + */ + bool skl = DEVICE_ID_SKYLAKE_OR_LATER(pdev->device); + + edac_dbg(0, "MC:\n"); + + if (!ecc_capable(pdev)) { + ie31200_printk(KERN_INFO, "No ECC support\n"); + return -ENODEV; + } + + nr_channels = how_many_channels(pdev); + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = IE31200_DIMMS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = nr_channels; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct ie31200_priv)); + if (!mci) + return -ENOMEM; + + window = ie31200_map_mchbar(pdev); + if (!window) { + ret = -ENODEV; + goto fail_free; + } + + edac_dbg(3, "MC: init mci\n"); + mci->pdev = &pdev->dev; + if (skl) + mci->mtype_cap = MEM_FLAG_DDR4; + else + mci->mtype_cap = MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = ie31200_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = ie31200_check; + mci->ctl_page_to_phys = NULL; + priv = mci->pvt_info; + priv->window = window; + if (skl) { + priv->c0errlog = window + IE31200_C0ECCERRLOG_SKL; + priv->c1errlog = window + IE31200_C1ECCERRLOG_SKL; + mad_offset = IE31200_MAD_DIMM_0_OFFSET_SKL; + } else { + priv->c0errlog = window + IE31200_C0ECCERRLOG; + priv->c1errlog = window + IE31200_C1ECCERRLOG; + mad_offset = IE31200_MAD_DIMM_0_OFFSET; + } + + /* populate DIMM info */ + for (i = 0; i < IE31200_CHANNELS; i++) { + addr_decode = readl(window + mad_offset + + (i * 4)); + edac_dbg(0, "addr_decode: 0x%x\n", addr_decode); + for (j = 0; j < IE31200_DIMMS_PER_CHANNEL; j++) { + populate_dimm_info(&dimm_info[i][j], addr_decode, j, + skl); + edac_dbg(0, "size: 0x%x, rank: %d, width: %d\n", + dimm_info[i][j].size, + dimm_info[i][j].dual_rank, + dimm_info[i][j].x16_width); + } + } + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 64MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + */ + for (i = 0; i < IE31200_DIMMS_PER_CHANNEL; i++) { + for (j = 0; j < IE31200_CHANNELS; j++) { + struct dimm_info *dimm; + unsigned long nr_pages; + + nr_pages = IE31200_PAGES(dimm_info[j][i].size, skl); + if (nr_pages == 0) + continue; + + if (dimm_info[j][i].dual_rank) { + nr_pages = nr_pages / 2; + dimm = edac_get_dimm(mci, (i * 2) + 1, j, 0); + dimm->nr_pages = nr_pages; + edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages); + dimm->grain = 8; /* just a guess */ + if (skl) + dimm->mtype = MEM_DDR4; + else + dimm->mtype = MEM_DDR3; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_UNKNOWN; + } + dimm = edac_get_dimm(mci, i * 2, j, 0); + dimm->nr_pages = nr_pages; + edac_dbg(0, "set nr pages: 0x%lx\n", nr_pages); + dimm->grain = 8; /* same guess */ + if (skl) + dimm->mtype = MEM_DDR4; + else + dimm->mtype = MEM_DDR3; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_UNKNOWN; + } + } + + ie31200_clear_error_info(mci); + + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); + ret = -ENODEV; + goto fail_unmap; + } + + /* get this far and it's successful */ + edac_dbg(3, "MC: success\n"); + return 0; + +fail_unmap: + iounmap(window); + +fail_free: + edac_mc_free(mci); + + return ret; +} + +static int ie31200_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "MC:\n"); + if (pci_enable_device(pdev) < 0) + return -EIO; + rc = ie31200_probe1(pdev, ent->driver_data); + if (rc == 0 && !mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void ie31200_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + struct ie31200_priv *priv; + + edac_dbg(0, "\n"); + pci_dev_put(mci_pdev); + mci_pdev = NULL; + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + priv = mci->pvt_info; + iounmap(priv->window); + edac_mc_free(mci); +} + +static const struct pci_device_id ie31200_pci_tbl[] = { + { PCI_VEND_DEV(INTEL, IE31200_HB_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_9), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_10), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_11), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_1), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_2), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_3), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_4), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_5), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_6), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_7), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_8), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_9), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { PCI_VEND_DEV(INTEL, IE31200_HB_CFL_10), PCI_ANY_ID, PCI_ANY_ID, 0, 0, IE31200 }, + { 0, } /* 0 terminated list. */ +}; +MODULE_DEVICE_TABLE(pci, ie31200_pci_tbl); + +static struct pci_driver ie31200_driver = { + .name = EDAC_MOD_STR, + .probe = ie31200_init_one, + .remove = ie31200_remove_one, + .id_table = ie31200_pci_tbl, +}; + +static int __init ie31200_init(void) +{ + int pci_rc, i; + + edac_dbg(3, "MC:\n"); + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&ie31200_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + ie31200_registered = 0; + for (i = 0; ie31200_pci_tbl[i].vendor != 0; i++) { + mci_pdev = pci_get_device(ie31200_pci_tbl[i].vendor, + ie31200_pci_tbl[i].device, + NULL); + if (mci_pdev) + break; + } + if (!mci_pdev) { + edac_dbg(0, "ie31200 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + pci_rc = ie31200_init_one(mci_pdev, &ie31200_pci_tbl[i]); + if (pci_rc < 0) { + edac_dbg(0, "ie31200 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + return 0; + +fail1: + pci_unregister_driver(&ie31200_driver); +fail0: + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit ie31200_exit(void) +{ + edac_dbg(3, "MC:\n"); + pci_unregister_driver(&ie31200_driver); + if (!ie31200_registered) + ie31200_remove_one(mci_pdev); +} + +module_init(ie31200_init); +module_exit(ie31200_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jason Baron <jbaron@akamai.com>"); +MODULE_DESCRIPTION("MC support for Intel Processor E31200 memory hub controllers"); diff --git a/drivers/edac/igen6_edac.c b/drivers/edac/igen6_edac.c new file mode 100644 index 000000000..8ec70da8d --- /dev/null +++ b/drivers/edac/igen6_edac.c @@ -0,0 +1,1301 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Intel client SoC with integrated memory controller using IBECC + * + * Copyright (C) 2020 Intel Corporation + * + * The In-Band ECC (IBECC) IP provides ECC protection to all or specific + * regions of the physical memory space. It's used for memory controllers + * that don't support the out-of-band ECC which often needs an additional + * storage device to each channel for storing ECC data. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/irq_work.h> +#include <linux/llist.h> +#include <linux/genalloc.h> +#include <linux/edac.h> +#include <linux/bits.h> +#include <linux/io.h> +#include <asm/mach_traps.h> +#include <asm/nmi.h> +#include <asm/mce.h> + +#include "edac_mc.h" +#include "edac_module.h" + +#define IGEN6_REVISION "v2.5.1" + +#define EDAC_MOD_STR "igen6_edac" +#define IGEN6_NMI_NAME "igen6_ibecc" + +/* Debug macros */ +#define igen6_printk(level, fmt, arg...) \ + edac_printk(level, "igen6", fmt, ##arg) + +#define igen6_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "igen6", fmt, ##arg) + +#define GET_BITFIELD(v, lo, hi) (((v) & GENMASK_ULL(hi, lo)) >> (lo)) + +#define NUM_IMC 2 /* Max memory controllers */ +#define NUM_CHANNELS 2 /* Max channels */ +#define NUM_DIMMS 2 /* Max DIMMs per channel */ + +#define _4GB BIT_ULL(32) + +/* Size of physical memory */ +#define TOM_OFFSET 0xa0 +/* Top of low usable DRAM */ +#define TOLUD_OFFSET 0xbc +/* Capability register C */ +#define CAPID_C_OFFSET 0xec +#define CAPID_C_IBECC BIT(15) + +/* Capability register E */ +#define CAPID_E_OFFSET 0xf0 +#define CAPID_E_IBECC BIT(12) + +/* Error Status */ +#define ERRSTS_OFFSET 0xc8 +#define ERRSTS_CE BIT_ULL(6) +#define ERRSTS_UE BIT_ULL(7) + +/* Error Command */ +#define ERRCMD_OFFSET 0xca +#define ERRCMD_CE BIT_ULL(6) +#define ERRCMD_UE BIT_ULL(7) + +/* IBECC MMIO base address */ +#define IBECC_BASE (res_cfg->ibecc_base) +#define IBECC_ACTIVATE_OFFSET IBECC_BASE +#define IBECC_ACTIVATE_EN BIT(0) + +/* IBECC error log */ +#define ECC_ERROR_LOG_OFFSET (IBECC_BASE + res_cfg->ibecc_error_log_offset) +#define ECC_ERROR_LOG_CE BIT_ULL(62) +#define ECC_ERROR_LOG_UE BIT_ULL(63) +#define ECC_ERROR_LOG_ADDR_SHIFT 5 +#define ECC_ERROR_LOG_ADDR(v) GET_BITFIELD(v, 5, 38) +#define ECC_ERROR_LOG_SYND(v) GET_BITFIELD(v, 46, 61) + +/* Host MMIO base address */ +#define MCHBAR_OFFSET 0x48 +#define MCHBAR_EN BIT_ULL(0) +#define MCHBAR_BASE(v) (GET_BITFIELD(v, 16, 38) << 16) +#define MCHBAR_SIZE 0x10000 + +/* Parameters for the channel decode stage */ +#define IMC_BASE (res_cfg->imc_base) +#define MAD_INTER_CHANNEL_OFFSET IMC_BASE +#define MAD_INTER_CHANNEL_DDR_TYPE(v) GET_BITFIELD(v, 0, 2) +#define MAD_INTER_CHANNEL_ECHM(v) GET_BITFIELD(v, 3, 3) +#define MAD_INTER_CHANNEL_CH_L_MAP(v) GET_BITFIELD(v, 4, 4) +#define MAD_INTER_CHANNEL_CH_S_SIZE(v) ((u64)GET_BITFIELD(v, 12, 19) << 29) + +/* Parameters for DRAM decode stage */ +#define MAD_INTRA_CH0_OFFSET (IMC_BASE + 4) +#define MAD_INTRA_CH_DIMM_L_MAP(v) GET_BITFIELD(v, 0, 0) + +/* DIMM characteristics */ +#define MAD_DIMM_CH0_OFFSET (IMC_BASE + 0xc) +#define MAD_DIMM_CH_DIMM_L_SIZE(v) ((u64)GET_BITFIELD(v, 0, 6) << 29) +#define MAD_DIMM_CH_DLW(v) GET_BITFIELD(v, 7, 8) +#define MAD_DIMM_CH_DIMM_S_SIZE(v) ((u64)GET_BITFIELD(v, 16, 22) << 29) +#define MAD_DIMM_CH_DSW(v) GET_BITFIELD(v, 24, 25) + +/* Hash for memory controller selection */ +#define MAD_MC_HASH_OFFSET (IMC_BASE + 0x1b8) +#define MAC_MC_HASH_LSB(v) GET_BITFIELD(v, 1, 3) + +/* Hash for channel selection */ +#define CHANNEL_HASH_OFFSET (IMC_BASE + 0x24) +/* Hash for enhanced channel selection */ +#define CHANNEL_EHASH_OFFSET (IMC_BASE + 0x28) +#define CHANNEL_HASH_MASK(v) (GET_BITFIELD(v, 6, 19) << 6) +#define CHANNEL_HASH_LSB_MASK_BIT(v) GET_BITFIELD(v, 24, 26) +#define CHANNEL_HASH_MODE(v) GET_BITFIELD(v, 28, 28) + +/* Parameters for memory slice decode stage */ +#define MEM_SLICE_HASH_MASK(v) (GET_BITFIELD(v, 6, 19) << 6) +#define MEM_SLICE_HASH_LSB_MASK_BIT(v) GET_BITFIELD(v, 24, 26) + +static struct res_config { + bool machine_check; + int num_imc; + u32 imc_base; + u32 cmf_base; + u32 cmf_size; + u32 ms_hash_offset; + u32 ibecc_base; + u32 ibecc_error_log_offset; + bool (*ibecc_available)(struct pci_dev *pdev); + /* Convert error address logged in IBECC to system physical address */ + u64 (*err_addr_to_sys_addr)(u64 eaddr, int mc); + /* Convert error address logged in IBECC to integrated memory controller address */ + u64 (*err_addr_to_imc_addr)(u64 eaddr, int mc); +} *res_cfg; + +struct igen6_imc { + int mc; + struct mem_ctl_info *mci; + struct pci_dev *pdev; + struct device dev; + void __iomem *window; + u64 size; + u64 ch_s_size; + int ch_l_map; + u64 dimm_s_size[NUM_CHANNELS]; + u64 dimm_l_size[NUM_CHANNELS]; + int dimm_l_map[NUM_CHANNELS]; +}; + +static struct igen6_pvt { + struct igen6_imc imc[NUM_IMC]; + u64 ms_hash; + u64 ms_s_size; + int ms_l_map; +} *igen6_pvt; + +/* The top of low usable DRAM */ +static u32 igen6_tolud; +/* The size of physical memory */ +static u64 igen6_tom; + +struct decoded_addr { + int mc; + u64 imc_addr; + u64 sys_addr; + int channel_idx; + u64 channel_addr; + int sub_channel_idx; + u64 sub_channel_addr; +}; + +struct ecclog_node { + struct llist_node llnode; + int mc; + u64 ecclog; +}; + +/* + * In the NMI handler, the driver uses the lock-less memory allocator + * to allocate memory to store the IBECC error logs and links the logs + * to the lock-less list. Delay printk() and the work of error reporting + * to EDAC core in a worker. + */ +#define ECCLOG_POOL_SIZE PAGE_SIZE +static LLIST_HEAD(ecclog_llist); +static struct gen_pool *ecclog_pool; +static char ecclog_buf[ECCLOG_POOL_SIZE]; +static struct irq_work ecclog_irq_work; +static struct work_struct ecclog_work; + +/* Compute die IDs for Elkhart Lake with IBECC */ +#define DID_EHL_SKU5 0x4514 +#define DID_EHL_SKU6 0x4528 +#define DID_EHL_SKU7 0x452a +#define DID_EHL_SKU8 0x4516 +#define DID_EHL_SKU9 0x452c +#define DID_EHL_SKU10 0x452e +#define DID_EHL_SKU11 0x4532 +#define DID_EHL_SKU12 0x4518 +#define DID_EHL_SKU13 0x451a +#define DID_EHL_SKU14 0x4534 +#define DID_EHL_SKU15 0x4536 + +/* Compute die IDs for ICL-NNPI with IBECC */ +#define DID_ICL_SKU8 0x4581 +#define DID_ICL_SKU10 0x4585 +#define DID_ICL_SKU11 0x4589 +#define DID_ICL_SKU12 0x458d + +/* Compute die IDs for Tiger Lake with IBECC */ +#define DID_TGL_SKU 0x9a14 + +/* Compute die IDs for Alder Lake with IBECC */ +#define DID_ADL_SKU1 0x4601 +#define DID_ADL_SKU2 0x4602 +#define DID_ADL_SKU3 0x4621 +#define DID_ADL_SKU4 0x4641 + +static bool ehl_ibecc_available(struct pci_dev *pdev) +{ + u32 v; + + if (pci_read_config_dword(pdev, CAPID_C_OFFSET, &v)) + return false; + + return !!(CAPID_C_IBECC & v); +} + +static u64 ehl_err_addr_to_sys_addr(u64 eaddr, int mc) +{ + return eaddr; +} + +static u64 ehl_err_addr_to_imc_addr(u64 eaddr, int mc) +{ + if (eaddr < igen6_tolud) + return eaddr; + + if (igen6_tom <= _4GB) + return eaddr + igen6_tolud - _4GB; + + if (eaddr < _4GB) + return eaddr + igen6_tolud - igen6_tom; + + return eaddr; +} + +static bool icl_ibecc_available(struct pci_dev *pdev) +{ + u32 v; + + if (pci_read_config_dword(pdev, CAPID_C_OFFSET, &v)) + return false; + + return !(CAPID_C_IBECC & v) && + (boot_cpu_data.x86_stepping >= 1); +} + +static bool tgl_ibecc_available(struct pci_dev *pdev) +{ + u32 v; + + if (pci_read_config_dword(pdev, CAPID_E_OFFSET, &v)) + return false; + + return !(CAPID_E_IBECC & v); +} + +static u64 mem_addr_to_sys_addr(u64 maddr) +{ + if (maddr < igen6_tolud) + return maddr; + + if (igen6_tom <= _4GB) + return maddr - igen6_tolud + _4GB; + + if (maddr < _4GB) + return maddr - igen6_tolud + igen6_tom; + + return maddr; +} + +static u64 mem_slice_hash(u64 addr, u64 mask, u64 hash_init, int intlv_bit) +{ + u64 hash_addr = addr & mask, hash = hash_init; + u64 intlv = (addr >> intlv_bit) & 1; + int i; + + for (i = 6; i < 20; i++) + hash ^= (hash_addr >> i) & 1; + + return hash ^ intlv; +} + +static u64 tgl_err_addr_to_mem_addr(u64 eaddr, int mc) +{ + u64 maddr, hash, mask, ms_s_size; + int intlv_bit; + u32 ms_hash; + + ms_s_size = igen6_pvt->ms_s_size; + if (eaddr >= ms_s_size) + return eaddr + ms_s_size; + + ms_hash = igen6_pvt->ms_hash; + + mask = MEM_SLICE_HASH_MASK(ms_hash); + intlv_bit = MEM_SLICE_HASH_LSB_MASK_BIT(ms_hash) + 6; + + maddr = GET_BITFIELD(eaddr, intlv_bit, 63) << (intlv_bit + 1) | + GET_BITFIELD(eaddr, 0, intlv_bit - 1); + + hash = mem_slice_hash(maddr, mask, mc, intlv_bit); + + return maddr | (hash << intlv_bit); +} + +static u64 tgl_err_addr_to_sys_addr(u64 eaddr, int mc) +{ + u64 maddr = tgl_err_addr_to_mem_addr(eaddr, mc); + + return mem_addr_to_sys_addr(maddr); +} + +static u64 tgl_err_addr_to_imc_addr(u64 eaddr, int mc) +{ + return eaddr; +} + +static u64 adl_err_addr_to_sys_addr(u64 eaddr, int mc) +{ + return mem_addr_to_sys_addr(eaddr); +} + +static u64 adl_err_addr_to_imc_addr(u64 eaddr, int mc) +{ + u64 imc_addr, ms_s_size = igen6_pvt->ms_s_size; + struct igen6_imc *imc = &igen6_pvt->imc[mc]; + int intlv_bit; + u32 mc_hash; + + if (eaddr >= 2 * ms_s_size) + return eaddr - ms_s_size; + + mc_hash = readl(imc->window + MAD_MC_HASH_OFFSET); + + intlv_bit = MAC_MC_HASH_LSB(mc_hash) + 6; + + imc_addr = GET_BITFIELD(eaddr, intlv_bit + 1, 63) << intlv_bit | + GET_BITFIELD(eaddr, 0, intlv_bit - 1); + + return imc_addr; +} + +static struct res_config ehl_cfg = { + .num_imc = 1, + .imc_base = 0x5000, + .ibecc_base = 0xdc00, + .ibecc_available = ehl_ibecc_available, + .ibecc_error_log_offset = 0x170, + .err_addr_to_sys_addr = ehl_err_addr_to_sys_addr, + .err_addr_to_imc_addr = ehl_err_addr_to_imc_addr, +}; + +static struct res_config icl_cfg = { + .num_imc = 1, + .imc_base = 0x5000, + .ibecc_base = 0xd800, + .ibecc_error_log_offset = 0x170, + .ibecc_available = icl_ibecc_available, + .err_addr_to_sys_addr = ehl_err_addr_to_sys_addr, + .err_addr_to_imc_addr = ehl_err_addr_to_imc_addr, +}; + +static struct res_config tgl_cfg = { + .machine_check = true, + .num_imc = 2, + .imc_base = 0x5000, + .cmf_base = 0x11000, + .cmf_size = 0x800, + .ms_hash_offset = 0xac, + .ibecc_base = 0xd400, + .ibecc_error_log_offset = 0x170, + .ibecc_available = tgl_ibecc_available, + .err_addr_to_sys_addr = tgl_err_addr_to_sys_addr, + .err_addr_to_imc_addr = tgl_err_addr_to_imc_addr, +}; + +static struct res_config adl_cfg = { + .machine_check = true, + .num_imc = 2, + .imc_base = 0xd800, + .ibecc_base = 0xd400, + .ibecc_error_log_offset = 0x68, + .ibecc_available = tgl_ibecc_available, + .err_addr_to_sys_addr = adl_err_addr_to_sys_addr, + .err_addr_to_imc_addr = adl_err_addr_to_imc_addr, +}; + +static const struct pci_device_id igen6_pci_tbl[] = { + { PCI_VDEVICE(INTEL, DID_EHL_SKU5), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU6), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU7), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU8), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU9), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU10), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU11), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU12), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU13), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU14), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_EHL_SKU15), (kernel_ulong_t)&ehl_cfg }, + { PCI_VDEVICE(INTEL, DID_ICL_SKU8), (kernel_ulong_t)&icl_cfg }, + { PCI_VDEVICE(INTEL, DID_ICL_SKU10), (kernel_ulong_t)&icl_cfg }, + { PCI_VDEVICE(INTEL, DID_ICL_SKU11), (kernel_ulong_t)&icl_cfg }, + { PCI_VDEVICE(INTEL, DID_ICL_SKU12), (kernel_ulong_t)&icl_cfg }, + { PCI_VDEVICE(INTEL, DID_TGL_SKU), (kernel_ulong_t)&tgl_cfg }, + { PCI_VDEVICE(INTEL, DID_ADL_SKU1), (kernel_ulong_t)&adl_cfg }, + { PCI_VDEVICE(INTEL, DID_ADL_SKU2), (kernel_ulong_t)&adl_cfg }, + { PCI_VDEVICE(INTEL, DID_ADL_SKU3), (kernel_ulong_t)&adl_cfg }, + { PCI_VDEVICE(INTEL, DID_ADL_SKU4), (kernel_ulong_t)&adl_cfg }, + { }, +}; +MODULE_DEVICE_TABLE(pci, igen6_pci_tbl); + +static enum dev_type get_width(int dimm_l, u32 mad_dimm) +{ + u32 w = dimm_l ? MAD_DIMM_CH_DLW(mad_dimm) : + MAD_DIMM_CH_DSW(mad_dimm); + + switch (w) { + case 0: + return DEV_X8; + case 1: + return DEV_X16; + case 2: + return DEV_X32; + default: + return DEV_UNKNOWN; + } +} + +static enum mem_type get_memory_type(u32 mad_inter) +{ + u32 t = MAD_INTER_CHANNEL_DDR_TYPE(mad_inter); + + switch (t) { + case 0: + return MEM_DDR4; + case 1: + return MEM_DDR3; + case 2: + return MEM_LPDDR3; + case 3: + return MEM_LPDDR4; + case 4: + return MEM_WIO2; + default: + return MEM_UNKNOWN; + } +} + +static int decode_chan_idx(u64 addr, u64 mask, int intlv_bit) +{ + u64 hash_addr = addr & mask, hash = 0; + u64 intlv = (addr >> intlv_bit) & 1; + int i; + + for (i = 6; i < 20; i++) + hash ^= (hash_addr >> i) & 1; + + return (int)hash ^ intlv; +} + +static u64 decode_channel_addr(u64 addr, int intlv_bit) +{ + u64 channel_addr; + + /* Remove the interleave bit and shift upper part down to fill gap */ + channel_addr = GET_BITFIELD(addr, intlv_bit + 1, 63) << intlv_bit; + channel_addr |= GET_BITFIELD(addr, 0, intlv_bit - 1); + + return channel_addr; +} + +static void decode_addr(u64 addr, u32 hash, u64 s_size, int l_map, + int *idx, u64 *sub_addr) +{ + int intlv_bit = CHANNEL_HASH_LSB_MASK_BIT(hash) + 6; + + if (addr > 2 * s_size) { + *sub_addr = addr - s_size; + *idx = l_map; + return; + } + + if (CHANNEL_HASH_MODE(hash)) { + *sub_addr = decode_channel_addr(addr, intlv_bit); + *idx = decode_chan_idx(addr, CHANNEL_HASH_MASK(hash), intlv_bit); + } else { + *sub_addr = decode_channel_addr(addr, 6); + *idx = GET_BITFIELD(addr, 6, 6); + } +} + +static int igen6_decode(struct decoded_addr *res) +{ + struct igen6_imc *imc = &igen6_pvt->imc[res->mc]; + u64 addr = res->imc_addr, sub_addr, s_size; + int idx, l_map; + u32 hash; + + if (addr >= igen6_tom) { + edac_dbg(0, "Address 0x%llx out of range\n", addr); + return -EINVAL; + } + + /* Decode channel */ + hash = readl(imc->window + CHANNEL_HASH_OFFSET); + s_size = imc->ch_s_size; + l_map = imc->ch_l_map; + decode_addr(addr, hash, s_size, l_map, &idx, &sub_addr); + res->channel_idx = idx; + res->channel_addr = sub_addr; + + /* Decode sub-channel/DIMM */ + hash = readl(imc->window + CHANNEL_EHASH_OFFSET); + s_size = imc->dimm_s_size[idx]; + l_map = imc->dimm_l_map[idx]; + decode_addr(res->channel_addr, hash, s_size, l_map, &idx, &sub_addr); + res->sub_channel_idx = idx; + res->sub_channel_addr = sub_addr; + + return 0; +} + +static void igen6_output_error(struct decoded_addr *res, + struct mem_ctl_info *mci, u64 ecclog) +{ + enum hw_event_mc_err_type type = ecclog & ECC_ERROR_LOG_UE ? + HW_EVENT_ERR_UNCORRECTED : + HW_EVENT_ERR_CORRECTED; + + edac_mc_handle_error(type, mci, 1, + res->sys_addr >> PAGE_SHIFT, + res->sys_addr & ~PAGE_MASK, + ECC_ERROR_LOG_SYND(ecclog), + res->channel_idx, res->sub_channel_idx, + -1, "", ""); +} + +static struct gen_pool *ecclog_gen_pool_create(void) +{ + struct gen_pool *pool; + + pool = gen_pool_create(ilog2(sizeof(struct ecclog_node)), -1); + if (!pool) + return NULL; + + if (gen_pool_add(pool, (unsigned long)ecclog_buf, ECCLOG_POOL_SIZE, -1)) { + gen_pool_destroy(pool); + return NULL; + } + + return pool; +} + +static int ecclog_gen_pool_add(int mc, u64 ecclog) +{ + struct ecclog_node *node; + + node = (void *)gen_pool_alloc(ecclog_pool, sizeof(*node)); + if (!node) + return -ENOMEM; + + node->mc = mc; + node->ecclog = ecclog; + llist_add(&node->llnode, &ecclog_llist); + + return 0; +} + +/* + * Either the memory-mapped I/O status register ECC_ERROR_LOG or the PCI + * configuration space status register ERRSTS can indicate whether a + * correctable error or an uncorrectable error occurred. We only use the + * ECC_ERROR_LOG register to check error type, but need to clear both + * registers to enable future error events. + */ +static u64 ecclog_read_and_clear(struct igen6_imc *imc) +{ + u64 ecclog = readq(imc->window + ECC_ERROR_LOG_OFFSET); + + if (ecclog & (ECC_ERROR_LOG_CE | ECC_ERROR_LOG_UE)) { + /* Clear CE/UE bits by writing 1s */ + writeq(ecclog, imc->window + ECC_ERROR_LOG_OFFSET); + return ecclog; + } + + return 0; +} + +static void errsts_clear(struct igen6_imc *imc) +{ + u16 errsts; + + if (pci_read_config_word(imc->pdev, ERRSTS_OFFSET, &errsts)) { + igen6_printk(KERN_ERR, "Failed to read ERRSTS\n"); + return; + } + + /* Clear CE/UE bits by writing 1s */ + if (errsts & (ERRSTS_CE | ERRSTS_UE)) + pci_write_config_word(imc->pdev, ERRSTS_OFFSET, errsts); +} + +static int errcmd_enable_error_reporting(bool enable) +{ + struct igen6_imc *imc = &igen6_pvt->imc[0]; + u16 errcmd; + int rc; + + rc = pci_read_config_word(imc->pdev, ERRCMD_OFFSET, &errcmd); + if (rc) + return rc; + + if (enable) + errcmd |= ERRCMD_CE | ERRSTS_UE; + else + errcmd &= ~(ERRCMD_CE | ERRSTS_UE); + + rc = pci_write_config_word(imc->pdev, ERRCMD_OFFSET, errcmd); + if (rc) + return rc; + + return 0; +} + +static int ecclog_handler(void) +{ + struct igen6_imc *imc; + int i, n = 0; + u64 ecclog; + + for (i = 0; i < res_cfg->num_imc; i++) { + imc = &igen6_pvt->imc[i]; + + /* errsts_clear() isn't NMI-safe. Delay it in the IRQ context */ + + ecclog = ecclog_read_and_clear(imc); + if (!ecclog) + continue; + + if (!ecclog_gen_pool_add(i, ecclog)) + irq_work_queue(&ecclog_irq_work); + + n++; + } + + return n; +} + +static void ecclog_work_cb(struct work_struct *work) +{ + struct ecclog_node *node, *tmp; + struct mem_ctl_info *mci; + struct llist_node *head; + struct decoded_addr res; + u64 eaddr; + + head = llist_del_all(&ecclog_llist); + if (!head) + return; + + llist_for_each_entry_safe(node, tmp, head, llnode) { + memset(&res, 0, sizeof(res)); + eaddr = ECC_ERROR_LOG_ADDR(node->ecclog) << + ECC_ERROR_LOG_ADDR_SHIFT; + res.mc = node->mc; + res.sys_addr = res_cfg->err_addr_to_sys_addr(eaddr, res.mc); + res.imc_addr = res_cfg->err_addr_to_imc_addr(eaddr, res.mc); + + mci = igen6_pvt->imc[res.mc].mci; + + edac_dbg(2, "MC %d, ecclog = 0x%llx\n", node->mc, node->ecclog); + igen6_mc_printk(mci, KERN_DEBUG, "HANDLING IBECC MEMORY ERROR\n"); + igen6_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", res.sys_addr); + + if (!igen6_decode(&res)) + igen6_output_error(&res, mci, node->ecclog); + + gen_pool_free(ecclog_pool, (unsigned long)node, sizeof(*node)); + } +} + +static void ecclog_irq_work_cb(struct irq_work *irq_work) +{ + int i; + + for (i = 0; i < res_cfg->num_imc; i++) + errsts_clear(&igen6_pvt->imc[i]); + + if (!llist_empty(&ecclog_llist)) + schedule_work(&ecclog_work); +} + +static int ecclog_nmi_handler(unsigned int cmd, struct pt_regs *regs) +{ + unsigned char reason; + + if (!ecclog_handler()) + return NMI_DONE; + + /* + * Both In-Band ECC correctable error and uncorrectable error are + * reported by SERR# NMI. The NMI generic code (see pci_serr_error()) + * doesn't clear the bit NMI_REASON_CLEAR_SERR (in port 0x61) to + * re-enable the SERR# NMI after NMI handling. So clear this bit here + * to re-enable SERR# NMI for receiving future In-Band ECC errors. + */ + reason = x86_platform.get_nmi_reason() & NMI_REASON_CLEAR_MASK; + reason |= NMI_REASON_CLEAR_SERR; + outb(reason, NMI_REASON_PORT); + reason &= ~NMI_REASON_CLEAR_SERR; + outb(reason, NMI_REASON_PORT); + + return NMI_HANDLED; +} + +static int ecclog_mce_handler(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct mce *mce = (struct mce *)data; + char *type; + + if (mce->kflags & MCE_HANDLED_CEC) + return NOTIFY_DONE; + + /* + * Ignore unless this is a memory related error. + * We don't check the bit MCI_STATUS_ADDRV of MCi_STATUS here, + * since this bit isn't set on some CPU (e.g., Tiger Lake UP3). + */ + if ((mce->status & 0xefff) >> 7 != 1) + return NOTIFY_DONE; + + if (mce->mcgstatus & MCG_STATUS_MCIP) + type = "Exception"; + else + type = "Event"; + + edac_dbg(0, "CPU %d: Machine Check %s: 0x%llx Bank %d: 0x%llx\n", + mce->extcpu, type, mce->mcgstatus, + mce->bank, mce->status); + edac_dbg(0, "TSC 0x%llx\n", mce->tsc); + edac_dbg(0, "ADDR 0x%llx\n", mce->addr); + edac_dbg(0, "MISC 0x%llx\n", mce->misc); + edac_dbg(0, "PROCESSOR %u:0x%x TIME %llu SOCKET %u APIC 0x%x\n", + mce->cpuvendor, mce->cpuid, mce->time, + mce->socketid, mce->apicid); + /* + * We just use the Machine Check for the memory error notification. + * Each memory controller is associated with an IBECC instance. + * Directly read and clear the error information(error address and + * error type) on all the IBECC instances so that we know on which + * memory controller the memory error(s) occurred. + */ + if (!ecclog_handler()) + return NOTIFY_DONE; + + mce->kflags |= MCE_HANDLED_EDAC; + + return NOTIFY_DONE; +} + +static struct notifier_block ecclog_mce_dec = { + .notifier_call = ecclog_mce_handler, + .priority = MCE_PRIO_EDAC, +}; + +static bool igen6_check_ecc(struct igen6_imc *imc) +{ + u32 activate = readl(imc->window + IBECC_ACTIVATE_OFFSET); + + return !!(activate & IBECC_ACTIVATE_EN); +} + +static int igen6_get_dimm_config(struct mem_ctl_info *mci) +{ + struct igen6_imc *imc = mci->pvt_info; + u32 mad_inter, mad_intra, mad_dimm; + int i, j, ndimms, mc = imc->mc; + struct dimm_info *dimm; + enum mem_type mtype; + enum dev_type dtype; + u64 dsize; + bool ecc; + + edac_dbg(2, "\n"); + + mad_inter = readl(imc->window + MAD_INTER_CHANNEL_OFFSET); + mtype = get_memory_type(mad_inter); + ecc = igen6_check_ecc(imc); + imc->ch_s_size = MAD_INTER_CHANNEL_CH_S_SIZE(mad_inter); + imc->ch_l_map = MAD_INTER_CHANNEL_CH_L_MAP(mad_inter); + + for (i = 0; i < NUM_CHANNELS; i++) { + mad_intra = readl(imc->window + MAD_INTRA_CH0_OFFSET + i * 4); + mad_dimm = readl(imc->window + MAD_DIMM_CH0_OFFSET + i * 4); + + imc->dimm_l_size[i] = MAD_DIMM_CH_DIMM_L_SIZE(mad_dimm); + imc->dimm_s_size[i] = MAD_DIMM_CH_DIMM_S_SIZE(mad_dimm); + imc->dimm_l_map[i] = MAD_INTRA_CH_DIMM_L_MAP(mad_intra); + imc->size += imc->dimm_s_size[i]; + imc->size += imc->dimm_l_size[i]; + ndimms = 0; + + for (j = 0; j < NUM_DIMMS; j++) { + dimm = edac_get_dimm(mci, i, j, 0); + + if (j ^ imc->dimm_l_map[i]) { + dtype = get_width(0, mad_dimm); + dsize = imc->dimm_s_size[i]; + } else { + dtype = get_width(1, mad_dimm); + dsize = imc->dimm_l_size[i]; + } + + if (!dsize) + continue; + + dimm->grain = 64; + dimm->mtype = mtype; + dimm->dtype = dtype; + dimm->nr_pages = MiB_TO_PAGES(dsize >> 20); + dimm->edac_mode = EDAC_SECDED; + snprintf(dimm->label, sizeof(dimm->label), + "MC#%d_Chan#%d_DIMM#%d", mc, i, j); + edac_dbg(0, "MC %d, Channel %d, DIMM %d, Size %llu MiB (%u pages)\n", + mc, i, j, dsize >> 20, dimm->nr_pages); + + ndimms++; + } + + if (ndimms && !ecc) { + igen6_printk(KERN_ERR, "MC%d In-Band ECC is disabled\n", mc); + return -ENODEV; + } + } + + edac_dbg(0, "MC %d, total size %llu MiB\n", mc, imc->size >> 20); + + return 0; +} + +#ifdef CONFIG_EDAC_DEBUG +/* Top of upper usable DRAM */ +static u64 igen6_touud; +#define TOUUD_OFFSET 0xa8 + +static void igen6_reg_dump(struct igen6_imc *imc) +{ + int i; + + edac_dbg(2, "CHANNEL_HASH : 0x%x\n", + readl(imc->window + CHANNEL_HASH_OFFSET)); + edac_dbg(2, "CHANNEL_EHASH : 0x%x\n", + readl(imc->window + CHANNEL_EHASH_OFFSET)); + edac_dbg(2, "MAD_INTER_CHANNEL: 0x%x\n", + readl(imc->window + MAD_INTER_CHANNEL_OFFSET)); + edac_dbg(2, "ECC_ERROR_LOG : 0x%llx\n", + readq(imc->window + ECC_ERROR_LOG_OFFSET)); + + for (i = 0; i < NUM_CHANNELS; i++) { + edac_dbg(2, "MAD_INTRA_CH%d : 0x%x\n", i, + readl(imc->window + MAD_INTRA_CH0_OFFSET + i * 4)); + edac_dbg(2, "MAD_DIMM_CH%d : 0x%x\n", i, + readl(imc->window + MAD_DIMM_CH0_OFFSET + i * 4)); + } + edac_dbg(2, "TOLUD : 0x%x", igen6_tolud); + edac_dbg(2, "TOUUD : 0x%llx", igen6_touud); + edac_dbg(2, "TOM : 0x%llx", igen6_tom); +} + +static struct dentry *igen6_test; + +static int debugfs_u64_set(void *data, u64 val) +{ + u64 ecclog; + + if ((val >= igen6_tolud && val < _4GB) || val >= igen6_touud) { + edac_dbg(0, "Address 0x%llx out of range\n", val); + return 0; + } + + pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); + + val >>= ECC_ERROR_LOG_ADDR_SHIFT; + ecclog = (val << ECC_ERROR_LOG_ADDR_SHIFT) | ECC_ERROR_LOG_CE; + + if (!ecclog_gen_pool_add(0, ecclog)) + irq_work_queue(&ecclog_irq_work); + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); + +static void igen6_debug_setup(void) +{ + igen6_test = edac_debugfs_create_dir("igen6_test"); + if (!igen6_test) + return; + + if (!edac_debugfs_create_file("addr", 0200, igen6_test, + NULL, &fops_u64_wo)) { + debugfs_remove(igen6_test); + igen6_test = NULL; + } +} + +static void igen6_debug_teardown(void) +{ + debugfs_remove_recursive(igen6_test); +} +#else +static void igen6_reg_dump(struct igen6_imc *imc) {} +static void igen6_debug_setup(void) {} +static void igen6_debug_teardown(void) {} +#endif + +static int igen6_pci_setup(struct pci_dev *pdev, u64 *mchbar) +{ + union { + u64 v; + struct { + u32 v_lo; + u32 v_hi; + }; + } u; + + edac_dbg(2, "\n"); + + if (!res_cfg->ibecc_available(pdev)) { + edac_dbg(2, "No In-Band ECC IP\n"); + goto fail; + } + + if (pci_read_config_dword(pdev, TOLUD_OFFSET, &igen6_tolud)) { + igen6_printk(KERN_ERR, "Failed to read TOLUD\n"); + goto fail; + } + + igen6_tolud &= GENMASK(31, 20); + + if (pci_read_config_dword(pdev, TOM_OFFSET, &u.v_lo)) { + igen6_printk(KERN_ERR, "Failed to read lower TOM\n"); + goto fail; + } + + if (pci_read_config_dword(pdev, TOM_OFFSET + 4, &u.v_hi)) { + igen6_printk(KERN_ERR, "Failed to read upper TOM\n"); + goto fail; + } + + igen6_tom = u.v & GENMASK_ULL(38, 20); + + if (pci_read_config_dword(pdev, MCHBAR_OFFSET, &u.v_lo)) { + igen6_printk(KERN_ERR, "Failed to read lower MCHBAR\n"); + goto fail; + } + + if (pci_read_config_dword(pdev, MCHBAR_OFFSET + 4, &u.v_hi)) { + igen6_printk(KERN_ERR, "Failed to read upper MCHBAR\n"); + goto fail; + } + + if (!(u.v & MCHBAR_EN)) { + igen6_printk(KERN_ERR, "MCHBAR is disabled\n"); + goto fail; + } + + *mchbar = MCHBAR_BASE(u.v); + +#ifdef CONFIG_EDAC_DEBUG + if (pci_read_config_dword(pdev, TOUUD_OFFSET, &u.v_lo)) + edac_dbg(2, "Failed to read lower TOUUD\n"); + else if (pci_read_config_dword(pdev, TOUUD_OFFSET + 4, &u.v_hi)) + edac_dbg(2, "Failed to read upper TOUUD\n"); + else + igen6_touud = u.v & GENMASK_ULL(38, 20); +#endif + + return 0; +fail: + return -ENODEV; +} + +static int igen6_register_mci(int mc, u64 mchbar, struct pci_dev *pdev) +{ + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct igen6_imc *imc; + void __iomem *window; + int rc; + + edac_dbg(2, "\n"); + + mchbar += mc * MCHBAR_SIZE; + window = ioremap(mchbar, MCHBAR_SIZE); + if (!window) { + igen6_printk(KERN_ERR, "Failed to ioremap 0x%llx\n", mchbar); + return -ENODEV; + } + + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = NUM_CHANNELS; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = NUM_DIMMS; + layers[1].is_virt_csrow = true; + + mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, 0); + if (!mci) { + rc = -ENOMEM; + goto fail; + } + + mci->ctl_name = kasprintf(GFP_KERNEL, "Intel_client_SoC MC#%d", mc); + if (!mci->ctl_name) { + rc = -ENOMEM; + goto fail2; + } + + mci->mtype_cap = MEM_FLAG_LPDDR4 | MEM_FLAG_DDR4; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->dev_name = pci_name(pdev); + mci->pvt_info = &igen6_pvt->imc[mc]; + + imc = mci->pvt_info; + device_initialize(&imc->dev); + /* + * EDAC core uses mci->pdev(pointer of structure device) as + * memory controller ID. The client SoCs attach one or more + * memory controllers to single pci_dev (single pci_dev->dev + * can be for multiple memory controllers). + * + * To make mci->pdev unique, assign pci_dev->dev to mci->pdev + * for the first memory controller and assign a unique imc->dev + * to mci->pdev for each non-first memory controller. + */ + mci->pdev = mc ? &imc->dev : &pdev->dev; + imc->mc = mc; + imc->pdev = pdev; + imc->window = window; + + igen6_reg_dump(imc); + + rc = igen6_get_dimm_config(mci); + if (rc) + goto fail3; + + rc = edac_mc_add_mc(mci); + if (rc) { + igen6_printk(KERN_ERR, "Failed to register mci#%d\n", mc); + goto fail3; + } + + imc->mci = mci; + return 0; +fail3: + kfree(mci->ctl_name); +fail2: + edac_mc_free(mci); +fail: + iounmap(window); + return rc; +} + +static void igen6_unregister_mcis(void) +{ + struct mem_ctl_info *mci; + struct igen6_imc *imc; + int i; + + edac_dbg(2, "\n"); + + for (i = 0; i < res_cfg->num_imc; i++) { + imc = &igen6_pvt->imc[i]; + mci = imc->mci; + if (!mci) + continue; + + edac_mc_del_mc(mci->pdev); + kfree(mci->ctl_name); + edac_mc_free(mci); + iounmap(imc->window); + } +} + +static int igen6_mem_slice_setup(u64 mchbar) +{ + struct igen6_imc *imc = &igen6_pvt->imc[0]; + u64 base = mchbar + res_cfg->cmf_base; + u32 offset = res_cfg->ms_hash_offset; + u32 size = res_cfg->cmf_size; + u64 ms_s_size, ms_hash; + void __iomem *cmf; + int ms_l_map; + + edac_dbg(2, "\n"); + + if (imc[0].size < imc[1].size) { + ms_s_size = imc[0].size; + ms_l_map = 1; + } else { + ms_s_size = imc[1].size; + ms_l_map = 0; + } + + igen6_pvt->ms_s_size = ms_s_size; + igen6_pvt->ms_l_map = ms_l_map; + + edac_dbg(0, "ms_s_size: %llu MiB, ms_l_map %d\n", + ms_s_size >> 20, ms_l_map); + + if (!size) + return 0; + + cmf = ioremap(base, size); + if (!cmf) { + igen6_printk(KERN_ERR, "Failed to ioremap cmf 0x%llx\n", base); + return -ENODEV; + } + + ms_hash = readq(cmf + offset); + igen6_pvt->ms_hash = ms_hash; + + edac_dbg(0, "MEM_SLICE_HASH: 0x%llx\n", ms_hash); + + iounmap(cmf); + + return 0; +} + +static int register_err_handler(void) +{ + int rc; + + if (res_cfg->machine_check) { + mce_register_decode_chain(&ecclog_mce_dec); + return 0; + } + + rc = register_nmi_handler(NMI_SERR, ecclog_nmi_handler, + 0, IGEN6_NMI_NAME); + if (rc) { + igen6_printk(KERN_ERR, "Failed to register NMI handler\n"); + return rc; + } + + return 0; +} + +static void unregister_err_handler(void) +{ + if (res_cfg->machine_check) { + mce_unregister_decode_chain(&ecclog_mce_dec); + return; + } + + unregister_nmi_handler(NMI_SERR, IGEN6_NMI_NAME); +} + +static int igen6_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + u64 mchbar; + int i, rc; + + edac_dbg(2, "\n"); + + igen6_pvt = kzalloc(sizeof(*igen6_pvt), GFP_KERNEL); + if (!igen6_pvt) + return -ENOMEM; + + res_cfg = (struct res_config *)ent->driver_data; + + rc = igen6_pci_setup(pdev, &mchbar); + if (rc) + goto fail; + + for (i = 0; i < res_cfg->num_imc; i++) { + rc = igen6_register_mci(i, mchbar, pdev); + if (rc) + goto fail2; + } + + if (res_cfg->num_imc > 1) { + rc = igen6_mem_slice_setup(mchbar); + if (rc) + goto fail2; + } + + ecclog_pool = ecclog_gen_pool_create(); + if (!ecclog_pool) { + rc = -ENOMEM; + goto fail2; + } + + INIT_WORK(&ecclog_work, ecclog_work_cb); + init_irq_work(&ecclog_irq_work, ecclog_irq_work_cb); + + rc = register_err_handler(); + if (rc) + goto fail3; + + /* Enable error reporting */ + rc = errcmd_enable_error_reporting(true); + if (rc) { + igen6_printk(KERN_ERR, "Failed to enable error reporting\n"); + goto fail4; + } + + /* Check if any pending errors before/during the registration of the error handler */ + ecclog_handler(); + + igen6_debug_setup(); + return 0; +fail4: + unregister_nmi_handler(NMI_SERR, IGEN6_NMI_NAME); +fail3: + gen_pool_destroy(ecclog_pool); +fail2: + igen6_unregister_mcis(); +fail: + kfree(igen6_pvt); + return rc; +} + +static void igen6_remove(struct pci_dev *pdev) +{ + edac_dbg(2, "\n"); + + igen6_debug_teardown(); + errcmd_enable_error_reporting(false); + unregister_err_handler(); + irq_work_sync(&ecclog_irq_work); + flush_work(&ecclog_work); + gen_pool_destroy(ecclog_pool); + igen6_unregister_mcis(); + kfree(igen6_pvt); +} + +static struct pci_driver igen6_driver = { + .name = EDAC_MOD_STR, + .probe = igen6_probe, + .remove = igen6_remove, + .id_table = igen6_pci_tbl, +}; + +static int __init igen6_init(void) +{ + const char *owner; + int rc; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -ENODEV; + + edac_op_state = EDAC_OPSTATE_NMI; + + rc = pci_register_driver(&igen6_driver); + if (rc) + return rc; + + igen6_printk(KERN_INFO, "%s\n", IGEN6_REVISION); + + return 0; +} + +static void __exit igen6_exit(void) +{ + edac_dbg(2, "\n"); + + pci_unregister_driver(&igen6_driver); +} + +module_init(igen6_init); +module_exit(igen6_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Qiuxu Zhuo"); +MODULE_DESCRIPTION("MC Driver for Intel client SoC using In-Band ECC"); diff --git a/drivers/edac/layerscape_edac.c b/drivers/edac/layerscape_edac.c new file mode 100644 index 000000000..94cac7686 --- /dev/null +++ b/drivers/edac/layerscape_edac.c @@ -0,0 +1,73 @@ +/* + * Freescale Memory Controller kernel module + * + * Author: York Sun <york.sun@nxp.com> + * + * Copyright 2016 NXP Semiconductor + * + * Derived from mpc85xx_edac.c + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "edac_module.h" +#include "fsl_ddr_edac.h" + +static const struct of_device_id fsl_ddr_mc_err_of_match[] = { + { .compatible = "fsl,qoriq-memory-controller", }, + {}, +}; +MODULE_DEVICE_TABLE(of, fsl_ddr_mc_err_of_match); + +static struct platform_driver fsl_ddr_mc_err_driver = { + .probe = fsl_mc_err_probe, + .remove = fsl_mc_err_remove, + .driver = { + .name = "fsl_ddr_mc_err", + .of_match_table = fsl_ddr_mc_err_of_match, + }, +}; + +static int __init fsl_ddr_mc_init(void) +{ + int res; + + /* make sure error reporting method is sane */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + res = platform_driver_register(&fsl_ddr_mc_err_driver); + if (res) { + pr_err("MC fails to register\n"); + return res; + } + + return 0; +} + +module_init(fsl_ddr_mc_init); + +static void __exit fsl_ddr_mc_exit(void) +{ + platform_driver_unregister(&fsl_ddr_mc_err_driver); +} + +module_exit(fsl_ddr_mc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NXP Semiconductor"); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, + "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c new file mode 100644 index 000000000..cc5c63feb --- /dev/null +++ b/drivers/edac/mce_amd.c @@ -0,0 +1,1446 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/module.h> +#include <linux/slab.h> + +#include <asm/cpu.h> + +#include "mce_amd.h" + +static struct amd_decoder_ops fam_ops; + +static u8 xec_mask = 0xf; + +static void (*decode_dram_ecc)(int node_id, struct mce *m); + +void amd_register_ecc_decoder(void (*f)(int, struct mce *)) +{ + decode_dram_ecc = f; +} +EXPORT_SYMBOL_GPL(amd_register_ecc_decoder); + +void amd_unregister_ecc_decoder(void (*f)(int, struct mce *)) +{ + if (decode_dram_ecc) { + WARN_ON(decode_dram_ecc != f); + + decode_dram_ecc = NULL; + } +} +EXPORT_SYMBOL_GPL(amd_unregister_ecc_decoder); + +/* + * string representation for the different MCA reported error types, see F3x48 + * or MSR0000_0411. + */ + +/* transaction type */ +static const char * const tt_msgs[] = { "INSN", "DATA", "GEN", "RESV" }; + +/* cache level */ +static const char * const ll_msgs[] = { "RESV", "L1", "L2", "L3/GEN" }; + +/* memory transaction type */ +static const char * const rrrr_msgs[] = { + "GEN", "RD", "WR", "DRD", "DWR", "IRD", "PRF", "EV", "SNP" +}; + +/* participating processor */ +const char * const pp_msgs[] = { "SRC", "RES", "OBS", "GEN" }; +EXPORT_SYMBOL_GPL(pp_msgs); + +/* request timeout */ +static const char * const to_msgs[] = { "no timeout", "timed out" }; + +/* memory or i/o */ +static const char * const ii_msgs[] = { "MEM", "RESV", "IO", "GEN" }; + +/* internal error type */ +static const char * const uu_msgs[] = { "RESV", "RESV", "HWA", "RESV" }; + +static const char * const f15h_mc1_mce_desc[] = { + "UC during a demand linefill from L2", + "Parity error during data load from IC", + "Parity error for IC valid bit", + "Main tag parity error", + "Parity error in prediction queue", + "PFB data/address parity error", + "Parity error in the branch status reg", + "PFB promotion address error", + "Tag error during probe/victimization", + "Parity error for IC probe tag valid bit", + "PFB non-cacheable bit parity error", + "PFB valid bit parity error", /* xec = 0xd */ + "Microcode Patch Buffer", /* xec = 010 */ + "uop queue", + "insn buffer", + "predecode buffer", + "fetch address FIFO", + "dispatch uop queue" +}; + +static const char * const f15h_mc2_mce_desc[] = { + "Fill ECC error on data fills", /* xec = 0x4 */ + "Fill parity error on insn fills", + "Prefetcher request FIFO parity error", + "PRQ address parity error", + "PRQ data parity error", + "WCC Tag ECC error", + "WCC Data ECC error", + "WCB Data parity error", + "VB Data ECC or parity error", + "L2 Tag ECC error", /* xec = 0x10 */ + "Hard L2 Tag ECC error", + "Multiple hits on L2 tag", + "XAB parity error", + "PRB address parity error" +}; + +static const char * const mc4_mce_desc[] = { + "DRAM ECC error detected on the NB", + "CRC error detected on HT link", + "Link-defined sync error packets detected on HT link", + "HT Master abort", + "HT Target abort", + "Invalid GART PTE entry during GART table walk", + "Unsupported atomic RMW received from an IO link", + "Watchdog timeout due to lack of progress", + "DRAM ECC error detected on the NB", + "SVM DMA Exclusion Vector error", + "HT data error detected on link", + "Protocol error (link, L3, probe filter)", + "NB internal arrays parity error", + "DRAM addr/ctl signals parity error", + "IO link transmission error", + "L3 data cache ECC error", /* xec = 0x1c */ + "L3 cache tag error", + "L3 LRU parity bits error", + "ECC Error in the Probe Filter directory" +}; + +static const char * const mc5_mce_desc[] = { + "CPU Watchdog timer expire", + "Wakeup array dest tag", + "AG payload array", + "EX payload array", + "IDRF array", + "Retire dispatch queue", + "Mapper checkpoint array", + "Physical register file EX0 port", + "Physical register file EX1 port", + "Physical register file AG0 port", + "Physical register file AG1 port", + "Flag register file", + "DE error occurred", + "Retire status queue" +}; + +static const char * const mc6_mce_desc[] = { + "Hardware Assertion", + "Free List", + "Physical Register File", + "Retire Queue", + "Scheduler table", + "Status Register File", +}; + +/* Scalable MCA error strings */ +static const char * const smca_ls_mce_desc[] = { + "Load queue parity error", + "Store queue parity error", + "Miss address buffer payload parity error", + "Level 1 TLB parity error", + "DC Tag error type 5", + "DC Tag error type 6", + "DC Tag error type 1", + "Internal error type 1", + "Internal error type 2", + "System Read Data Error Thread 0", + "System Read Data Error Thread 1", + "DC Tag error type 2", + "DC Data error type 1 and poison consumption", + "DC Data error type 2", + "DC Data error type 3", + "DC Tag error type 4", + "Level 2 TLB parity error", + "PDC parity error", + "DC Tag error type 3", + "DC Tag error type 5", + "L2 Fill Data error", +}; + +static const char * const smca_ls2_mce_desc[] = { + "An ECC error was detected on a data cache read by a probe or victimization", + "An ECC error or L2 poison was detected on a data cache read by a load", + "An ECC error was detected on a data cache read-modify-write by a store", + "An ECC error or poison bit mismatch was detected on a tag read by a probe or victimization", + "An ECC error or poison bit mismatch was detected on a tag read by a load", + "An ECC error or poison bit mismatch was detected on a tag read by a store", + "An ECC error was detected on an EMEM read by a load", + "An ECC error was detected on an EMEM read-modify-write by a store", + "A parity error was detected in an L1 TLB entry by any access", + "A parity error was detected in an L2 TLB entry by any access", + "A parity error was detected in a PWC entry by any access", + "A parity error was detected in an STQ entry by any access", + "A parity error was detected in an LDQ entry by any access", + "A parity error was detected in a MAB entry by any access", + "A parity error was detected in an SCB entry state field by any access", + "A parity error was detected in an SCB entry address field by any access", + "A parity error was detected in an SCB entry data field by any access", + "A parity error was detected in a WCB entry by any access", + "A poisoned line was detected in an SCB entry by any access", + "A SystemReadDataError error was reported on read data returned from L2 for a load", + "A SystemReadDataError error was reported on read data returned from L2 for an SCB store", + "A SystemReadDataError error was reported on read data returned from L2 for a WCB store", + "A hardware assertion error was reported", + "A parity error was detected in an STLF, SCB EMEM entry or SRB store data by any access", +}; + +static const char * const smca_if_mce_desc[] = { + "Op Cache Microtag Probe Port Parity Error", + "IC Microtag or Full Tag Multi-hit Error", + "IC Full Tag Parity Error", + "IC Data Array Parity Error", + "Decoupling Queue PhysAddr Parity Error", + "L0 ITLB Parity Error", + "L1 ITLB Parity Error", + "L2 ITLB Parity Error", + "BPQ Thread 0 Snoop Parity Error", + "BPQ Thread 1 Snoop Parity Error", + "L1 BTB Multi-Match Error", + "L2 BTB Multi-Match Error", + "L2 Cache Response Poison Error", + "System Read Data Error", + "Hardware Assertion Error", + "L1-TLB Multi-Hit", + "L2-TLB Multi-Hit", + "BSR Parity Error", + "CT MCE", +}; + +static const char * const smca_l2_mce_desc[] = { + "L2M Tag Multiple-Way-Hit error", + "L2M Tag or State Array ECC Error", + "L2M Data Array ECC Error", + "Hardware Assert Error", +}; + +static const char * const smca_de_mce_desc[] = { + "Micro-op cache tag parity error", + "Micro-op cache data parity error", + "Instruction buffer parity error", + "Micro-op queue parity error", + "Instruction dispatch queue parity error", + "Fetch address FIFO parity error", + "Patch RAM data parity error", + "Patch RAM sequencer parity error", + "Micro-op buffer parity error", + "Hardware Assertion MCA Error", +}; + +static const char * const smca_ex_mce_desc[] = { + "Watchdog Timeout error", + "Physical register file parity error", + "Flag register file parity error", + "Immediate displacement register file parity error", + "Address generator payload parity error", + "EX payload parity error", + "Checkpoint queue parity error", + "Retire dispatch queue parity error", + "Retire status queue parity error", + "Scheduling queue parity error", + "Branch buffer queue parity error", + "Hardware Assertion error", + "Spec Map parity error", + "Retire Map parity error", +}; + +static const char * const smca_fp_mce_desc[] = { + "Physical register file (PRF) parity error", + "Freelist (FL) parity error", + "Schedule queue parity error", + "NSQ parity error", + "Retire queue (RQ) parity error", + "Status register file (SRF) parity error", + "Hardware assertion", +}; + +static const char * const smca_l3_mce_desc[] = { + "Shadow Tag Macro ECC Error", + "Shadow Tag Macro Multi-way-hit Error", + "L3M Tag ECC Error", + "L3M Tag Multi-way-hit Error", + "L3M Data ECC Error", + "SDP Parity Error or SystemReadDataError from XI", + "L3 Victim Queue Parity Error", + "L3 Hardware Assertion", +}; + +static const char * const smca_cs_mce_desc[] = { + "Illegal Request", + "Address Violation", + "Security Violation", + "Illegal Response", + "Unexpected Response", + "Request or Probe Parity Error", + "Read Response Parity Error", + "Atomic Request Parity Error", + "Probe Filter ECC Error", +}; + +static const char * const smca_cs2_mce_desc[] = { + "Illegal Request", + "Address Violation", + "Security Violation", + "Illegal Response", + "Unexpected Response", + "Request or Probe Parity Error", + "Read Response Parity Error", + "Atomic Request Parity Error", + "SDP read response had no match in the CS queue", + "Probe Filter Protocol Error", + "Probe Filter ECC Error", + "SDP read response had an unexpected RETRY error", + "Counter overflow error", + "Counter underflow error", +}; + +static const char * const smca_pie_mce_desc[] = { + "Hardware Assert", + "Register security violation", + "Link Error", + "Poison data consumption", + "A deferred error was detected in the DF" +}; + +static const char * const smca_umc_mce_desc[] = { + "DRAM ECC error", + "Data poison error", + "SDP parity error", + "Advanced peripheral bus error", + "Address/Command parity error", + "Write data CRC error", + "DCQ SRAM ECC error", + "AES SRAM ECC error", +}; + +static const char * const smca_umc2_mce_desc[] = { + "DRAM ECC error", + "Data poison error", + "SDP parity error", + "Reserved", + "Address/Command parity error", + "Write data parity error", + "DCQ SRAM ECC error", + "Reserved", + "Read data parity error", + "Rdb SRAM ECC error", + "RdRsp SRAM ECC error", + "LM32 MP errors", +}; + +static const char * const smca_pb_mce_desc[] = { + "An ECC error in the Parameter Block RAM array", +}; + +static const char * const smca_psp_mce_desc[] = { + "An ECC or parity error in a PSP RAM instance", +}; + +static const char * const smca_psp2_mce_desc[] = { + "High SRAM ECC or parity error", + "Low SRAM ECC or parity error", + "Instruction Cache Bank 0 ECC or parity error", + "Instruction Cache Bank 1 ECC or parity error", + "Instruction Tag Ram 0 parity error", + "Instruction Tag Ram 1 parity error", + "Data Cache Bank 0 ECC or parity error", + "Data Cache Bank 1 ECC or parity error", + "Data Cache Bank 2 ECC or parity error", + "Data Cache Bank 3 ECC or parity error", + "Data Tag Bank 0 parity error", + "Data Tag Bank 1 parity error", + "Data Tag Bank 2 parity error", + "Data Tag Bank 3 parity error", + "Dirty Data Ram parity error", + "TLB Bank 0 parity error", + "TLB Bank 1 parity error", + "System Hub Read Buffer ECC or parity error", +}; + +static const char * const smca_smu_mce_desc[] = { + "An ECC or parity error in an SMU RAM instance", +}; + +static const char * const smca_smu2_mce_desc[] = { + "High SRAM ECC or parity error", + "Low SRAM ECC or parity error", + "Data Cache Bank A ECC or parity error", + "Data Cache Bank B ECC or parity error", + "Data Tag Cache Bank A ECC or parity error", + "Data Tag Cache Bank B ECC or parity error", + "Instruction Cache Bank A ECC or parity error", + "Instruction Cache Bank B ECC or parity error", + "Instruction Tag Cache Bank A ECC or parity error", + "Instruction Tag Cache Bank B ECC or parity error", + "System Hub Read Buffer ECC or parity error", + "PHY RAM ECC error", +}; + +static const char * const smca_mp5_mce_desc[] = { + "High SRAM ECC or parity error", + "Low SRAM ECC or parity error", + "Data Cache Bank A ECC or parity error", + "Data Cache Bank B ECC or parity error", + "Data Tag Cache Bank A ECC or parity error", + "Data Tag Cache Bank B ECC or parity error", + "Instruction Cache Bank A ECC or parity error", + "Instruction Cache Bank B ECC or parity error", + "Instruction Tag Cache Bank A ECC or parity error", + "Instruction Tag Cache Bank B ECC or parity error", +}; + +static const char * const smca_mpdma_mce_desc[] = { + "Main SRAM [31:0] bank ECC or parity error", + "Main SRAM [63:32] bank ECC or parity error", + "Main SRAM [95:64] bank ECC or parity error", + "Main SRAM [127:96] bank ECC or parity error", + "Data Cache Bank A ECC or parity error", + "Data Cache Bank B ECC or parity error", + "Data Tag Cache Bank A ECC or parity error", + "Data Tag Cache Bank B ECC or parity error", + "Instruction Cache Bank A ECC or parity error", + "Instruction Cache Bank B ECC or parity error", + "Instruction Tag Cache Bank A ECC or parity error", + "Instruction Tag Cache Bank B ECC or parity error", + "Data Cache Bank A ECC or parity error", + "Data Cache Bank B ECC or parity error", + "Data Tag Cache Bank A ECC or parity error", + "Data Tag Cache Bank B ECC or parity error", + "Instruction Cache Bank A ECC or parity error", + "Instruction Cache Bank B ECC or parity error", + "Instruction Tag Cache Bank A ECC or parity error", + "Instruction Tag Cache Bank B ECC or parity error", + "Data Cache Bank A ECC or parity error", + "Data Cache Bank B ECC or parity error", + "Data Tag Cache Bank A ECC or parity error", + "Data Tag Cache Bank B ECC or parity error", + "Instruction Cache Bank A ECC or parity error", + "Instruction Cache Bank B ECC or parity error", + "Instruction Tag Cache Bank A ECC or parity error", + "Instruction Tag Cache Bank B ECC or parity error", + "System Hub Read Buffer ECC or parity error", + "MPDMA TVF DVSEC Memory ECC or parity error", + "MPDMA TVF MMIO Mailbox0 ECC or parity error", + "MPDMA TVF MMIO Mailbox1 ECC or parity error", + "MPDMA TVF Doorbell Memory ECC or parity error", + "MPDMA TVF SDP Slave Memory 0 ECC or parity error", + "MPDMA TVF SDP Slave Memory 1 ECC or parity error", + "MPDMA TVF SDP Slave Memory 2 ECC or parity error", + "MPDMA TVF SDP Master Memory 0 ECC or parity error", + "MPDMA TVF SDP Master Memory 1 ECC or parity error", + "MPDMA TVF SDP Master Memory 2 ECC or parity error", + "MPDMA TVF SDP Master Memory 3 ECC or parity error", + "MPDMA TVF SDP Master Memory 4 ECC or parity error", + "MPDMA TVF SDP Master Memory 5 ECC or parity error", + "MPDMA TVF SDP Master Memory 6 ECC or parity error", + "MPDMA PTE Command FIFO ECC or parity error", + "MPDMA PTE Hub Data FIFO ECC or parity error", + "MPDMA PTE Internal Data FIFO ECC or parity error", + "MPDMA PTE Command Memory DMA ECC or parity error", + "MPDMA PTE Command Memory Internal ECC or parity error", + "MPDMA PTE DMA Completion FIFO ECC or parity error", + "MPDMA PTE Tablewalk Completion FIFO ECC or parity error", + "MPDMA PTE Descriptor Completion FIFO ECC or parity error", + "MPDMA PTE ReadOnly Completion FIFO ECC or parity error", + "MPDMA PTE DirectWrite Completion FIFO ECC or parity error", + "SDP Watchdog Timer expired", +}; + +static const char * const smca_nbio_mce_desc[] = { + "ECC or Parity error", + "PCIE error", + "SDP ErrEvent error", + "SDP Egress Poison Error", + "IOHC Internal Poison Error", +}; + +static const char * const smca_pcie_mce_desc[] = { + "CCIX PER Message logging", + "CCIX Read Response with Status: Non-Data Error", + "CCIX Write Response with Status: Non-Data Error", + "CCIX Read Response with Status: Data Error", + "CCIX Non-okay write response with data error", +}; + +static const char * const smca_pcie2_mce_desc[] = { + "SDP Parity Error logging", +}; + +static const char * const smca_xgmipcs_mce_desc[] = { + "Data Loss Error", + "Training Error", + "Flow Control Acknowledge Error", + "Rx Fifo Underflow Error", + "Rx Fifo Overflow Error", + "CRC Error", + "BER Exceeded Error", + "Tx Vcid Data Error", + "Replay Buffer Parity Error", + "Data Parity Error", + "Replay Fifo Overflow Error", + "Replay Fifo Underflow Error", + "Elastic Fifo Overflow Error", + "Deskew Error", + "Flow Control CRC Error", + "Data Startup Limit Error", + "FC Init Timeout Error", + "Recovery Timeout Error", + "Ready Serial Timeout Error", + "Ready Serial Attempt Error", + "Recovery Attempt Error", + "Recovery Relock Attempt Error", + "Replay Attempt Error", + "Sync Header Error", + "Tx Replay Timeout Error", + "Rx Replay Timeout Error", + "LinkSub Tx Timeout Error", + "LinkSub Rx Timeout Error", + "Rx CMD Packet Error", +}; + +static const char * const smca_xgmiphy_mce_desc[] = { + "RAM ECC Error", + "ARC instruction buffer parity error", + "ARC data buffer parity error", + "PHY APB error", +}; + +static const char * const smca_nbif_mce_desc[] = { + "Timeout error from GMI", + "SRAM ECC error", + "NTB Error Event", + "SDP Parity error", +}; + +static const char * const smca_sata_mce_desc[] = { + "Parity error for port 0", + "Parity error for port 1", + "Parity error for port 2", + "Parity error for port 3", + "Parity error for port 4", + "Parity error for port 5", + "Parity error for port 6", + "Parity error for port 7", +}; + +static const char * const smca_usb_mce_desc[] = { + "Parity error or ECC error for S0 RAM0", + "Parity error or ECC error for S0 RAM1", + "Parity error or ECC error for S0 RAM2", + "Parity error for PHY RAM0", + "Parity error for PHY RAM1", + "AXI Slave Response error", +}; + +static const char * const smca_gmipcs_mce_desc[] = { + "Data Loss Error", + "Training Error", + "Replay Parity Error", + "Rx Fifo Underflow Error", + "Rx Fifo Overflow Error", + "CRC Error", + "BER Exceeded Error", + "Tx Fifo Underflow Error", + "Replay Buffer Parity Error", + "Tx Overflow Error", + "Replay Fifo Overflow Error", + "Replay Fifo Underflow Error", + "Elastic Fifo Overflow Error", + "Deskew Error", + "Offline Error", + "Data Startup Limit Error", + "FC Init Timeout Error", + "Recovery Timeout Error", + "Ready Serial Timeout Error", + "Ready Serial Attempt Error", + "Recovery Attempt Error", + "Recovery Relock Attempt Error", + "Deskew Abort Error", + "Rx Buffer Error", + "Rx LFDS Fifo Overflow Error", + "Rx LFDS Fifo Underflow Error", + "LinkSub Tx Timeout Error", + "LinkSub Rx Timeout Error", + "Rx CMD Packet Error", + "LFDS Training Timeout Error", + "LFDS FC Init Timeout Error", + "Data Loss Error", +}; + +struct smca_mce_desc { + const char * const *descs; + unsigned int num_descs; +}; + +static struct smca_mce_desc smca_mce_descs[] = { + [SMCA_LS] = { smca_ls_mce_desc, ARRAY_SIZE(smca_ls_mce_desc) }, + [SMCA_LS_V2] = { smca_ls2_mce_desc, ARRAY_SIZE(smca_ls2_mce_desc) }, + [SMCA_IF] = { smca_if_mce_desc, ARRAY_SIZE(smca_if_mce_desc) }, + [SMCA_L2_CACHE] = { smca_l2_mce_desc, ARRAY_SIZE(smca_l2_mce_desc) }, + [SMCA_DE] = { smca_de_mce_desc, ARRAY_SIZE(smca_de_mce_desc) }, + [SMCA_EX] = { smca_ex_mce_desc, ARRAY_SIZE(smca_ex_mce_desc) }, + [SMCA_FP] = { smca_fp_mce_desc, ARRAY_SIZE(smca_fp_mce_desc) }, + [SMCA_L3_CACHE] = { smca_l3_mce_desc, ARRAY_SIZE(smca_l3_mce_desc) }, + [SMCA_CS] = { smca_cs_mce_desc, ARRAY_SIZE(smca_cs_mce_desc) }, + [SMCA_CS_V2] = { smca_cs2_mce_desc, ARRAY_SIZE(smca_cs2_mce_desc) }, + [SMCA_PIE] = { smca_pie_mce_desc, ARRAY_SIZE(smca_pie_mce_desc) }, + [SMCA_UMC] = { smca_umc_mce_desc, ARRAY_SIZE(smca_umc_mce_desc) }, + [SMCA_UMC_V2] = { smca_umc2_mce_desc, ARRAY_SIZE(smca_umc2_mce_desc) }, + [SMCA_PB] = { smca_pb_mce_desc, ARRAY_SIZE(smca_pb_mce_desc) }, + [SMCA_PSP] = { smca_psp_mce_desc, ARRAY_SIZE(smca_psp_mce_desc) }, + [SMCA_PSP_V2] = { smca_psp2_mce_desc, ARRAY_SIZE(smca_psp2_mce_desc) }, + [SMCA_SMU] = { smca_smu_mce_desc, ARRAY_SIZE(smca_smu_mce_desc) }, + [SMCA_SMU_V2] = { smca_smu2_mce_desc, ARRAY_SIZE(smca_smu2_mce_desc) }, + [SMCA_MP5] = { smca_mp5_mce_desc, ARRAY_SIZE(smca_mp5_mce_desc) }, + [SMCA_MPDMA] = { smca_mpdma_mce_desc, ARRAY_SIZE(smca_mpdma_mce_desc) }, + [SMCA_NBIO] = { smca_nbio_mce_desc, ARRAY_SIZE(smca_nbio_mce_desc) }, + [SMCA_PCIE] = { smca_pcie_mce_desc, ARRAY_SIZE(smca_pcie_mce_desc) }, + [SMCA_PCIE_V2] = { smca_pcie2_mce_desc, ARRAY_SIZE(smca_pcie2_mce_desc) }, + [SMCA_XGMI_PCS] = { smca_xgmipcs_mce_desc, ARRAY_SIZE(smca_xgmipcs_mce_desc) }, + /* NBIF and SHUB have the same error descriptions, for now. */ + [SMCA_NBIF] = { smca_nbif_mce_desc, ARRAY_SIZE(smca_nbif_mce_desc) }, + [SMCA_SHUB] = { smca_nbif_mce_desc, ARRAY_SIZE(smca_nbif_mce_desc) }, + [SMCA_SATA] = { smca_sata_mce_desc, ARRAY_SIZE(smca_sata_mce_desc) }, + [SMCA_USB] = { smca_usb_mce_desc, ARRAY_SIZE(smca_usb_mce_desc) }, + [SMCA_GMI_PCS] = { smca_gmipcs_mce_desc, ARRAY_SIZE(smca_gmipcs_mce_desc) }, + /* All the PHY bank types have the same error descriptions, for now. */ + [SMCA_XGMI_PHY] = { smca_xgmiphy_mce_desc, ARRAY_SIZE(smca_xgmiphy_mce_desc) }, + [SMCA_WAFL_PHY] = { smca_xgmiphy_mce_desc, ARRAY_SIZE(smca_xgmiphy_mce_desc) }, + [SMCA_GMI_PHY] = { smca_xgmiphy_mce_desc, ARRAY_SIZE(smca_xgmiphy_mce_desc) }, +}; + +static bool f12h_mc0_mce(u16 ec, u8 xec) +{ + bool ret = false; + + if (MEM_ERROR(ec)) { + u8 ll = LL(ec); + ret = true; + + if (ll == LL_L2) + pr_cont("during L1 linefill from L2.\n"); + else if (ll == LL_L1) + pr_cont("Data/Tag %s error.\n", R4_MSG(ec)); + else + ret = false; + } + return ret; +} + +static bool f10h_mc0_mce(u16 ec, u8 xec) +{ + if (R4(ec) == R4_GEN && LL(ec) == LL_L1) { + pr_cont("during data scrub.\n"); + return true; + } + return f12h_mc0_mce(ec, xec); +} + +static bool k8_mc0_mce(u16 ec, u8 xec) +{ + if (BUS_ERROR(ec)) { + pr_cont("during system linefill.\n"); + return true; + } + + return f10h_mc0_mce(ec, xec); +} + +static bool cat_mc0_mce(u16 ec, u8 xec) +{ + u8 r4 = R4(ec); + bool ret = true; + + if (MEM_ERROR(ec)) { + + if (TT(ec) != TT_DATA || LL(ec) != LL_L1) + return false; + + switch (r4) { + case R4_DRD: + case R4_DWR: + pr_cont("Data/Tag parity error due to %s.\n", + (r4 == R4_DRD ? "load/hw prf" : "store")); + break; + case R4_EVICT: + pr_cont("Copyback parity error on a tag miss.\n"); + break; + case R4_SNOOP: + pr_cont("Tag parity error during snoop.\n"); + break; + default: + ret = false; + } + } else if (BUS_ERROR(ec)) { + + if ((II(ec) != II_MEM && II(ec) != II_IO) || LL(ec) != LL_LG) + return false; + + pr_cont("System read data error on a "); + + switch (r4) { + case R4_RD: + pr_cont("TLB reload.\n"); + break; + case R4_DWR: + pr_cont("store.\n"); + break; + case R4_DRD: + pr_cont("load.\n"); + break; + default: + ret = false; + } + } else { + ret = false; + } + + return ret; +} + +static bool f15h_mc0_mce(u16 ec, u8 xec) +{ + bool ret = true; + + if (MEM_ERROR(ec)) { + + switch (xec) { + case 0x0: + pr_cont("Data Array access error.\n"); + break; + + case 0x1: + pr_cont("UC error during a linefill from L2/NB.\n"); + break; + + case 0x2: + case 0x11: + pr_cont("STQ access error.\n"); + break; + + case 0x3: + pr_cont("SCB access error.\n"); + break; + + case 0x10: + pr_cont("Tag error.\n"); + break; + + case 0x12: + pr_cont("LDQ access error.\n"); + break; + + default: + ret = false; + } + } else if (BUS_ERROR(ec)) { + + if (!xec) + pr_cont("System Read Data Error.\n"); + else + pr_cont(" Internal error condition type %d.\n", xec); + } else if (INT_ERROR(ec)) { + if (xec <= 0x1f) + pr_cont("Hardware Assert.\n"); + else + ret = false; + + } else + ret = false; + + return ret; +} + +static void decode_mc0_mce(struct mce *m) +{ + u16 ec = EC(m->status); + u8 xec = XEC(m->status, xec_mask); + + pr_emerg(HW_ERR "MC0 Error: "); + + /* TLB error signatures are the same across families */ + if (TLB_ERROR(ec)) { + if (TT(ec) == TT_DATA) { + pr_cont("%s TLB %s.\n", LL_MSG(ec), + ((xec == 2) ? "locked miss" + : (xec ? "multimatch" : "parity"))); + return; + } + } else if (fam_ops.mc0_mce(ec, xec)) + ; + else + pr_emerg(HW_ERR "Corrupted MC0 MCE info?\n"); +} + +static bool k8_mc1_mce(u16 ec, u8 xec) +{ + u8 ll = LL(ec); + bool ret = true; + + if (!MEM_ERROR(ec)) + return false; + + if (ll == 0x2) + pr_cont("during a linefill from L2.\n"); + else if (ll == 0x1) { + switch (R4(ec)) { + case R4_IRD: + pr_cont("Parity error during data load.\n"); + break; + + case R4_EVICT: + pr_cont("Copyback Parity/Victim error.\n"); + break; + + case R4_SNOOP: + pr_cont("Tag Snoop error.\n"); + break; + + default: + ret = false; + break; + } + } else + ret = false; + + return ret; +} + +static bool cat_mc1_mce(u16 ec, u8 xec) +{ + u8 r4 = R4(ec); + bool ret = true; + + if (!MEM_ERROR(ec)) + return false; + + if (TT(ec) != TT_INSTR) + return false; + + if (r4 == R4_IRD) + pr_cont("Data/tag array parity error for a tag hit.\n"); + else if (r4 == R4_SNOOP) + pr_cont("Tag error during snoop/victimization.\n"); + else if (xec == 0x0) + pr_cont("Tag parity error from victim castout.\n"); + else if (xec == 0x2) + pr_cont("Microcode patch RAM parity error.\n"); + else + ret = false; + + return ret; +} + +static bool f15h_mc1_mce(u16 ec, u8 xec) +{ + bool ret = true; + + if (!MEM_ERROR(ec)) + return false; + + switch (xec) { + case 0x0 ... 0xa: + pr_cont("%s.\n", f15h_mc1_mce_desc[xec]); + break; + + case 0xd: + pr_cont("%s.\n", f15h_mc1_mce_desc[xec-2]); + break; + + case 0x10: + pr_cont("%s.\n", f15h_mc1_mce_desc[xec-4]); + break; + + case 0x11 ... 0x15: + pr_cont("Decoder %s parity error.\n", f15h_mc1_mce_desc[xec-4]); + break; + + default: + ret = false; + } + return ret; +} + +static void decode_mc1_mce(struct mce *m) +{ + u16 ec = EC(m->status); + u8 xec = XEC(m->status, xec_mask); + + pr_emerg(HW_ERR "MC1 Error: "); + + if (TLB_ERROR(ec)) + pr_cont("%s TLB %s.\n", LL_MSG(ec), + (xec ? "multimatch" : "parity error")); + else if (BUS_ERROR(ec)) { + bool k8 = (boot_cpu_data.x86 == 0xf && (m->status & BIT_64(58))); + + pr_cont("during %s.\n", (k8 ? "system linefill" : "NB data read")); + } else if (INT_ERROR(ec)) { + if (xec <= 0x3f) + pr_cont("Hardware Assert.\n"); + else + goto wrong_mc1_mce; + } else if (fam_ops.mc1_mce(ec, xec)) + ; + else + goto wrong_mc1_mce; + + return; + +wrong_mc1_mce: + pr_emerg(HW_ERR "Corrupted MC1 MCE info?\n"); +} + +static bool k8_mc2_mce(u16 ec, u8 xec) +{ + bool ret = true; + + if (xec == 0x1) + pr_cont(" in the write data buffers.\n"); + else if (xec == 0x3) + pr_cont(" in the victim data buffers.\n"); + else if (xec == 0x2 && MEM_ERROR(ec)) + pr_cont(": %s error in the L2 cache tags.\n", R4_MSG(ec)); + else if (xec == 0x0) { + if (TLB_ERROR(ec)) + pr_cont("%s error in a Page Descriptor Cache or Guest TLB.\n", + TT_MSG(ec)); + else if (BUS_ERROR(ec)) + pr_cont(": %s/ECC error in data read from NB: %s.\n", + R4_MSG(ec), PP_MSG(ec)); + else if (MEM_ERROR(ec)) { + u8 r4 = R4(ec); + + if (r4 >= 0x7) + pr_cont(": %s error during data copyback.\n", + R4_MSG(ec)); + else if (r4 <= 0x1) + pr_cont(": %s parity/ECC error during data " + "access from L2.\n", R4_MSG(ec)); + else + ret = false; + } else + ret = false; + } else + ret = false; + + return ret; +} + +static bool f15h_mc2_mce(u16 ec, u8 xec) +{ + bool ret = true; + + if (TLB_ERROR(ec)) { + if (xec == 0x0) + pr_cont("Data parity TLB read error.\n"); + else if (xec == 0x1) + pr_cont("Poison data provided for TLB fill.\n"); + else + ret = false; + } else if (BUS_ERROR(ec)) { + if (xec > 2) + ret = false; + + pr_cont("Error during attempted NB data read.\n"); + } else if (MEM_ERROR(ec)) { + switch (xec) { + case 0x4 ... 0xc: + pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x4]); + break; + + case 0x10 ... 0x14: + pr_cont("%s.\n", f15h_mc2_mce_desc[xec - 0x7]); + break; + + default: + ret = false; + } + } else if (INT_ERROR(ec)) { + if (xec <= 0x3f) + pr_cont("Hardware Assert.\n"); + else + ret = false; + } + + return ret; +} + +static bool f16h_mc2_mce(u16 ec, u8 xec) +{ + u8 r4 = R4(ec); + + if (!MEM_ERROR(ec)) + return false; + + switch (xec) { + case 0x04 ... 0x05: + pr_cont("%cBUFF parity error.\n", (r4 == R4_RD) ? 'I' : 'O'); + break; + + case 0x09 ... 0x0b: + case 0x0d ... 0x0f: + pr_cont("ECC error in L2 tag (%s).\n", + ((r4 == R4_GEN) ? "BankReq" : + ((r4 == R4_SNOOP) ? "Prb" : "Fill"))); + break; + + case 0x10 ... 0x19: + case 0x1b: + pr_cont("ECC error in L2 data array (%s).\n", + (((r4 == R4_RD) && !(xec & 0x3)) ? "Hit" : + ((r4 == R4_GEN) ? "Attr" : + ((r4 == R4_EVICT) ? "Vict" : "Fill")))); + break; + + case 0x1c ... 0x1d: + case 0x1f: + pr_cont("Parity error in L2 attribute bits (%s).\n", + ((r4 == R4_RD) ? "Hit" : + ((r4 == R4_GEN) ? "Attr" : "Fill"))); + break; + + default: + return false; + } + + return true; +} + +static void decode_mc2_mce(struct mce *m) +{ + u16 ec = EC(m->status); + u8 xec = XEC(m->status, xec_mask); + + pr_emerg(HW_ERR "MC2 Error: "); + + if (!fam_ops.mc2_mce(ec, xec)) + pr_cont(HW_ERR "Corrupted MC2 MCE info?\n"); +} + +static void decode_mc3_mce(struct mce *m) +{ + u16 ec = EC(m->status); + u8 xec = XEC(m->status, xec_mask); + + if (boot_cpu_data.x86 >= 0x14) { + pr_emerg("You shouldn't be seeing MC3 MCE on this cpu family," + " please report on LKML.\n"); + return; + } + + pr_emerg(HW_ERR "MC3 Error"); + + if (xec == 0x0) { + u8 r4 = R4(ec); + + if (!BUS_ERROR(ec) || (r4 != R4_DRD && r4 != R4_DWR)) + goto wrong_mc3_mce; + + pr_cont(" during %s.\n", R4_MSG(ec)); + } else + goto wrong_mc3_mce; + + return; + + wrong_mc3_mce: + pr_emerg(HW_ERR "Corrupted MC3 MCE info?\n"); +} + +static void decode_mc4_mce(struct mce *m) +{ + unsigned int fam = x86_family(m->cpuid); + int node_id = topology_die_id(m->extcpu); + u16 ec = EC(m->status); + u8 xec = XEC(m->status, 0x1f); + u8 offset = 0; + + pr_emerg(HW_ERR "MC4 Error (node %d): ", node_id); + + switch (xec) { + case 0x0 ... 0xe: + + /* special handling for DRAM ECCs */ + if (xec == 0x0 || xec == 0x8) { + /* no ECCs on F11h */ + if (fam == 0x11) + goto wrong_mc4_mce; + + pr_cont("%s.\n", mc4_mce_desc[xec]); + + if (decode_dram_ecc) + decode_dram_ecc(node_id, m); + return; + } + break; + + case 0xf: + if (TLB_ERROR(ec)) + pr_cont("GART Table Walk data error.\n"); + else if (BUS_ERROR(ec)) + pr_cont("DMA Exclusion Vector Table Walk error.\n"); + else + goto wrong_mc4_mce; + return; + + case 0x19: + if (fam == 0x15 || fam == 0x16) + pr_cont("Compute Unit Data Error.\n"); + else + goto wrong_mc4_mce; + return; + + case 0x1c ... 0x1f: + offset = 13; + break; + + default: + goto wrong_mc4_mce; + } + + pr_cont("%s.\n", mc4_mce_desc[xec - offset]); + return; + + wrong_mc4_mce: + pr_emerg(HW_ERR "Corrupted MC4 MCE info?\n"); +} + +static void decode_mc5_mce(struct mce *m) +{ + unsigned int fam = x86_family(m->cpuid); + u16 ec = EC(m->status); + u8 xec = XEC(m->status, xec_mask); + + if (fam == 0xf || fam == 0x11) + goto wrong_mc5_mce; + + pr_emerg(HW_ERR "MC5 Error: "); + + if (INT_ERROR(ec)) { + if (xec <= 0x1f) { + pr_cont("Hardware Assert.\n"); + return; + } else + goto wrong_mc5_mce; + } + + if (xec == 0x0 || xec == 0xc) + pr_cont("%s.\n", mc5_mce_desc[xec]); + else if (xec <= 0xd) + pr_cont("%s parity error.\n", mc5_mce_desc[xec]); + else + goto wrong_mc5_mce; + + return; + + wrong_mc5_mce: + pr_emerg(HW_ERR "Corrupted MC5 MCE info?\n"); +} + +static void decode_mc6_mce(struct mce *m) +{ + u8 xec = XEC(m->status, xec_mask); + + pr_emerg(HW_ERR "MC6 Error: "); + + if (xec > 0x5) + goto wrong_mc6_mce; + + pr_cont("%s parity error.\n", mc6_mce_desc[xec]); + return; + + wrong_mc6_mce: + pr_emerg(HW_ERR "Corrupted MC6 MCE info?\n"); +} + +/* Decode errors according to Scalable MCA specification */ +static void decode_smca_error(struct mce *m) +{ + enum smca_bank_types bank_type = smca_get_bank_type(m->extcpu, m->bank); + const char *ip_name; + u8 xec = XEC(m->status, xec_mask); + + if (bank_type >= N_SMCA_BANK_TYPES) + return; + + if (bank_type == SMCA_RESERVED) { + pr_emerg(HW_ERR "Bank %d is reserved.\n", m->bank); + return; + } + + ip_name = smca_get_long_name(bank_type); + + pr_emerg(HW_ERR "%s Ext. Error Code: %d", ip_name, xec); + + /* Only print the decode of valid error codes */ + if (xec < smca_mce_descs[bank_type].num_descs) + pr_cont(", %s.\n", smca_mce_descs[bank_type].descs[xec]); + + if (bank_type == SMCA_UMC && xec == 0 && decode_dram_ecc) + decode_dram_ecc(topology_die_id(m->extcpu), m); +} + +static inline void amd_decode_err_code(u16 ec) +{ + if (INT_ERROR(ec)) { + pr_emerg(HW_ERR "internal: %s\n", UU_MSG(ec)); + return; + } + + pr_emerg(HW_ERR "cache level: %s", LL_MSG(ec)); + + if (BUS_ERROR(ec)) + pr_cont(", mem/io: %s", II_MSG(ec)); + else + pr_cont(", tx: %s", TT_MSG(ec)); + + if (MEM_ERROR(ec) || BUS_ERROR(ec)) { + pr_cont(", mem-tx: %s", R4_MSG(ec)); + + if (BUS_ERROR(ec)) + pr_cont(", part-proc: %s (%s)", PP_MSG(ec), TO_MSG(ec)); + } + + pr_cont("\n"); +} + +static const char *decode_error_status(struct mce *m) +{ + if (m->status & MCI_STATUS_UC) { + if (m->status & MCI_STATUS_PCC) + return "System Fatal error."; + if (m->mcgstatus & MCG_STATUS_RIPV) + return "Uncorrected, software restartable error."; + return "Uncorrected, software containable error."; + } + + if (m->status & MCI_STATUS_DEFERRED) + return "Deferred error, no action required."; + + return "Corrected error, no action required."; +} + +static int +amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data) +{ + struct mce *m = (struct mce *)data; + unsigned int fam = x86_family(m->cpuid); + int ecc; + + if (m->kflags & MCE_HANDLED_CEC) + return NOTIFY_DONE; + + pr_emerg(HW_ERR "%s\n", decode_error_status(m)); + + pr_emerg(HW_ERR "CPU:%d (%x:%x:%x) MC%d_STATUS[%s|%s|%s|%s|%s", + m->extcpu, + fam, x86_model(m->cpuid), x86_stepping(m->cpuid), + m->bank, + ((m->status & MCI_STATUS_OVER) ? "Over" : "-"), + ((m->status & MCI_STATUS_UC) ? "UE" : + (m->status & MCI_STATUS_DEFERRED) ? "-" : "CE"), + ((m->status & MCI_STATUS_MISCV) ? "MiscV" : "-"), + ((m->status & MCI_STATUS_ADDRV) ? "AddrV" : "-"), + ((m->status & MCI_STATUS_PCC) ? "PCC" : "-")); + + if (boot_cpu_has(X86_FEATURE_SMCA)) { + u32 low, high; + u32 addr = MSR_AMD64_SMCA_MCx_CONFIG(m->bank); + + if (!rdmsr_safe(addr, &low, &high) && + (low & MCI_CONFIG_MCAX)) + pr_cont("|%s", ((m->status & MCI_STATUS_TCC) ? "TCC" : "-")); + + pr_cont("|%s", ((m->status & MCI_STATUS_SYNDV) ? "SyndV" : "-")); + } + + /* do the two bits[14:13] together */ + ecc = (m->status >> 45) & 0x3; + if (ecc) + pr_cont("|%sECC", ((ecc == 2) ? "C" : "U")); + + if (fam >= 0x15) { + pr_cont("|%s", (m->status & MCI_STATUS_DEFERRED ? "Deferred" : "-")); + + /* F15h, bank4, bit 43 is part of McaStatSubCache. */ + if (fam != 0x15 || m->bank != 4) + pr_cont("|%s", (m->status & MCI_STATUS_POISON ? "Poison" : "-")); + } + + if (fam >= 0x17) + pr_cont("|%s", (m->status & MCI_STATUS_SCRUB ? "Scrub" : "-")); + + pr_cont("]: 0x%016llx\n", m->status); + + if (m->status & MCI_STATUS_ADDRV) + pr_emerg(HW_ERR "Error Addr: 0x%016llx\n", m->addr); + + if (m->ppin) + pr_emerg(HW_ERR "PPIN: 0x%016llx\n", m->ppin); + + if (boot_cpu_has(X86_FEATURE_SMCA)) { + pr_emerg(HW_ERR "IPID: 0x%016llx", m->ipid); + + if (m->status & MCI_STATUS_SYNDV) + pr_cont(", Syndrome: 0x%016llx", m->synd); + + pr_cont("\n"); + + decode_smca_error(m); + goto err_code; + } + + if (m->tsc) + pr_emerg(HW_ERR "TSC: %llu\n", m->tsc); + + /* Doesn't matter which member to test. */ + if (!fam_ops.mc0_mce) + goto err_code; + + switch (m->bank) { + case 0: + decode_mc0_mce(m); + break; + + case 1: + decode_mc1_mce(m); + break; + + case 2: + decode_mc2_mce(m); + break; + + case 3: + decode_mc3_mce(m); + break; + + case 4: + decode_mc4_mce(m); + break; + + case 5: + decode_mc5_mce(m); + break; + + case 6: + decode_mc6_mce(m); + break; + + default: + break; + } + + err_code: + amd_decode_err_code(m->status & 0xffff); + + m->kflags |= MCE_HANDLED_EDAC; + return NOTIFY_OK; +} + +static struct notifier_block amd_mce_dec_nb = { + .notifier_call = amd_decode_mce, + .priority = MCE_PRIO_EDAC, +}; + +static int __init mce_amd_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + + if (c->x86_vendor != X86_VENDOR_AMD && + c->x86_vendor != X86_VENDOR_HYGON) + return -ENODEV; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + if (boot_cpu_has(X86_FEATURE_SMCA)) { + xec_mask = 0x3f; + goto out; + } + + switch (c->x86) { + case 0xf: + fam_ops.mc0_mce = k8_mc0_mce; + fam_ops.mc1_mce = k8_mc1_mce; + fam_ops.mc2_mce = k8_mc2_mce; + break; + + case 0x10: + fam_ops.mc0_mce = f10h_mc0_mce; + fam_ops.mc1_mce = k8_mc1_mce; + fam_ops.mc2_mce = k8_mc2_mce; + break; + + case 0x11: + fam_ops.mc0_mce = k8_mc0_mce; + fam_ops.mc1_mce = k8_mc1_mce; + fam_ops.mc2_mce = k8_mc2_mce; + break; + + case 0x12: + fam_ops.mc0_mce = f12h_mc0_mce; + fam_ops.mc1_mce = k8_mc1_mce; + fam_ops.mc2_mce = k8_mc2_mce; + break; + + case 0x14: + fam_ops.mc0_mce = cat_mc0_mce; + fam_ops.mc1_mce = cat_mc1_mce; + fam_ops.mc2_mce = k8_mc2_mce; + break; + + case 0x15: + xec_mask = c->x86_model == 0x60 ? 0x3f : 0x1f; + + fam_ops.mc0_mce = f15h_mc0_mce; + fam_ops.mc1_mce = f15h_mc1_mce; + fam_ops.mc2_mce = f15h_mc2_mce; + break; + + case 0x16: + xec_mask = 0x1f; + fam_ops.mc0_mce = cat_mc0_mce; + fam_ops.mc1_mce = cat_mc1_mce; + fam_ops.mc2_mce = f16h_mc2_mce; + break; + + case 0x17: + case 0x18: + pr_warn_once("Decoding supported only on Scalable MCA processors.\n"); + return -EINVAL; + + default: + printk(KERN_WARNING "Huh? What family is it: 0x%x?!\n", c->x86); + return -EINVAL; + } + +out: + pr_info("MCE: In-kernel MCE decoding enabled.\n"); + + mce_register_decode_chain(&amd_mce_dec_nb); + + return 0; +} +early_initcall(mce_amd_init); + +#ifdef MODULE +static void __exit mce_amd_exit(void) +{ + mce_unregister_decode_chain(&amd_mce_dec_nb); +} + +MODULE_DESCRIPTION("AMD MCE decoder"); +MODULE_ALIAS("edac-mce-amd"); +MODULE_LICENSE("GPL"); +module_exit(mce_amd_exit); +#endif diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h new file mode 100644 index 000000000..4811b18d9 --- /dev/null +++ b/drivers/edac/mce_amd.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _EDAC_MCE_AMD_H +#define _EDAC_MCE_AMD_H + +#include <linux/notifier.h> + +#include <asm/mce.h> + +#define EC(x) ((x) & 0xffff) + +#define LOW_SYNDROME(x) (((x) >> 15) & 0xff) +#define HIGH_SYNDROME(x) (((x) >> 24) & 0xff) + +#define TLB_ERROR(x) (((x) & 0xFFF0) == 0x0010) +#define MEM_ERROR(x) (((x) & 0xFF00) == 0x0100) +#define BUS_ERROR(x) (((x) & 0xF800) == 0x0800) +#define INT_ERROR(x) (((x) & 0xF4FF) == 0x0400) + +#define TT(x) (((x) >> 2) & 0x3) +#define TT_MSG(x) tt_msgs[TT(x)] +#define II(x) (((x) >> 2) & 0x3) +#define II_MSG(x) ii_msgs[II(x)] +#define LL(x) ((x) & 0x3) +#define LL_MSG(x) ll_msgs[LL(x)] +#define TO(x) (((x) >> 8) & 0x1) +#define TO_MSG(x) to_msgs[TO(x)] +#define PP(x) (((x) >> 9) & 0x3) +#define PP_MSG(x) pp_msgs[PP(x)] +#define UU(x) (((x) >> 8) & 0x3) +#define UU_MSG(x) uu_msgs[UU(x)] + +#define R4(x) (((x) >> 4) & 0xf) +#define R4_MSG(x) ((R4(x) < 9) ? rrrr_msgs[R4(x)] : "Wrong R4!") + +extern const char * const pp_msgs[]; + +enum tt_ids { + TT_INSTR = 0, + TT_DATA, + TT_GEN, + TT_RESV, +}; + +enum ll_ids { + LL_RESV = 0, + LL_L1, + LL_L2, + LL_LG, +}; + +enum ii_ids { + II_MEM = 0, + II_RESV, + II_IO, + II_GEN, +}; + +enum rrrr_ids { + R4_GEN = 0, + R4_RD, + R4_WR, + R4_DRD, + R4_DWR, + R4_IRD, + R4_PREF, + R4_EVICT, + R4_SNOOP, +}; + +/* + * per-family decoder ops + */ +struct amd_decoder_ops { + bool (*mc0_mce)(u16, u8); + bool (*mc1_mce)(u16, u8); + bool (*mc2_mce)(u16, u8); +}; + +void amd_register_ecc_decoder(void (*f)(int, struct mce *)); +void amd_unregister_ecc_decoder(void (*f)(int, struct mce *)); + +#endif /* _EDAC_MCE_AMD_H */ diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c new file mode 100644 index 000000000..e50d7928b --- /dev/null +++ b/drivers/edac/mpc85xx_edac.c @@ -0,0 +1,715 @@ +/* + * Freescale MPC85xx Memory Controller kernel module + * + * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc. + * + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ctype.h> +#include <linux/io.h> +#include <linux/mod_devicetable.h> +#include <linux/edac.h> +#include <linux/smp.h> +#include <linux/gfp.h> +#include <linux/fsl/edac.h> + +#include <linux/of_platform.h> +#include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include "edac_module.h" +#include "mpc85xx_edac.h" +#include "fsl_ddr_edac.h" + +static int edac_dev_idx; +#ifdef CONFIG_PCI +static int edac_pci_idx; +#endif + +/* + * PCI Err defines + */ +#ifdef CONFIG_PCI +static u32 orig_pci_err_cap_dr; +static u32 orig_pci_err_en; +#endif + +static u32 orig_l2_err_disable; + +/**************************** PCI Err device ***************************/ +#ifdef CONFIG_PCI + +static void mpc85xx_pci_check(struct edac_pci_ctl_info *pci) +{ + struct mpc85xx_pci_pdata *pdata = pci->pvt_info; + u32 err_detect; + + err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); + + /* master aborts can happen during PCI config cycles */ + if (!(err_detect & ~(PCI_EDE_MULTI_ERR | PCI_EDE_MST_ABRT))) { + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); + return; + } + + pr_err("PCI error(s) detected\n"); + pr_err("PCI/X ERR_DR register: %#08x\n", err_detect); + + pr_err("PCI/X ERR_ATTRIB register: %#08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ATTRIB)); + pr_err("PCI/X ERR_ADDR register: %#08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR)); + pr_err("PCI/X ERR_EXT_ADDR register: %#08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EXT_ADDR)); + pr_err("PCI/X ERR_DL register: %#08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DL)); + pr_err("PCI/X ERR_DH register: %#08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DH)); + + /* clear error bits */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); + + if (err_detect & PCI_EDE_PERR_MASK) + edac_pci_handle_pe(pci, pci->ctl_name); + + if ((err_detect & ~PCI_EDE_MULTI_ERR) & ~PCI_EDE_PERR_MASK) + edac_pci_handle_npe(pci, pci->ctl_name); +} + +static void mpc85xx_pcie_check(struct edac_pci_ctl_info *pci) +{ + struct mpc85xx_pci_pdata *pdata = pci->pvt_info; + u32 err_detect, err_cap_stat; + + err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); + err_cap_stat = in_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR); + + pr_err("PCIe error(s) detected\n"); + pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect); + pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n", err_cap_stat); + pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R0)); + pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R1)); + pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R2)); + pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n", + in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R3)); + + /* clear error bits */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect); + + /* reset error capture */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, err_cap_stat | 0x1); +} + +static int mpc85xx_pcie_find_capability(struct device_node *np) +{ + struct pci_controller *hose; + + if (!np) + return -EINVAL; + + hose = pci_find_hose_for_OF_device(np); + + return early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); +} + +static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id) +{ + struct edac_pci_ctl_info *pci = dev_id; + struct mpc85xx_pci_pdata *pdata = pci->pvt_info; + u32 err_detect; + + err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR); + + if (!err_detect) + return IRQ_NONE; + + if (pdata->is_pcie) + mpc85xx_pcie_check(pci); + else + mpc85xx_pci_check(pci); + + return IRQ_HANDLED; +} + +static int mpc85xx_pci_err_probe(struct platform_device *op) +{ + struct edac_pci_ctl_info *pci; + struct mpc85xx_pci_pdata *pdata; + struct mpc85xx_edac_pci_plat_data *plat_data; + struct device_node *of_node; + struct resource r; + int res = 0; + + if (!devres_open_group(&op->dev, mpc85xx_pci_err_probe, GFP_KERNEL)) + return -ENOMEM; + + pci = edac_pci_alloc_ctl_info(sizeof(*pdata), "mpc85xx_pci_err"); + if (!pci) + return -ENOMEM; + + /* make sure error reporting method is sane */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + pdata = pci->pvt_info; + pdata->name = "mpc85xx_pci_err"; + + plat_data = op->dev.platform_data; + if (!plat_data) { + dev_err(&op->dev, "no platform data"); + res = -ENXIO; + goto err; + } + of_node = plat_data->of_node; + + if (mpc85xx_pcie_find_capability(of_node) > 0) + pdata->is_pcie = true; + + dev_set_drvdata(&op->dev, pci); + pci->dev = &op->dev; + pci->mod_name = EDAC_MOD_STR; + pci->ctl_name = pdata->name; + pci->dev_name = dev_name(&op->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) { + if (pdata->is_pcie) + pci->edac_check = mpc85xx_pcie_check; + else + pci->edac_check = mpc85xx_pci_check; + } + + pdata->edac_idx = edac_pci_idx++; + + res = of_address_to_resource(of_node, 0, &r); + if (res) { + pr_err("%s: Unable to get resource for PCI err regs\n", __func__); + goto err; + } + + /* we only need the error registers */ + r.start += 0xe00; + + if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), + pdata->name)) { + pr_err("%s: Error while requesting mem region\n", __func__); + res = -EBUSY; + goto err; + } + + pdata->pci_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); + if (!pdata->pci_vbase) { + pr_err("%s: Unable to setup PCI err regs\n", __func__); + res = -ENOMEM; + goto err; + } + + if (pdata->is_pcie) { + orig_pci_err_cap_dr = + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR); + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, ~0); + orig_pci_err_en = + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, 0); + } else { + orig_pci_err_cap_dr = + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR); + + /* PCI master abort is expected during config cycles */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40); + + orig_pci_err_en = + in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN); + + /* disable master abort reporting */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40); + } + + /* clear error bits */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0); + + /* reset error capture */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR, 0x1); + + if (edac_pci_add_device(pci, pdata->edac_idx) > 0) { + edac_dbg(3, "failed edac_pci_add_device()\n"); + goto err; + } + + if (edac_op_state == EDAC_OPSTATE_INT) { + pdata->irq = irq_of_parse_and_map(of_node, 0); + res = devm_request_irq(&op->dev, pdata->irq, + mpc85xx_pci_isr, + IRQF_SHARED, + "[EDAC] PCI err", pci); + if (res < 0) { + pr_err("%s: Unable to request irq %d for MPC85xx PCI err\n", + __func__, pdata->irq); + irq_dispose_mapping(pdata->irq); + res = -ENODEV; + goto err2; + } + + pr_info(EDAC_MOD_STR " acquired irq %d for PCI Err\n", + pdata->irq); + } + + if (pdata->is_pcie) { + /* + * Enable all PCIe error interrupt & error detect except invalid + * PEX_CONFIG_ADDR/PEX_CONFIG_DATA access interrupt generation + * enable bit and invalid PEX_CONFIG_ADDR/PEX_CONFIG_DATA access + * detection enable bit. Because PCIe bus code to initialize and + * configure these PCIe devices on booting will use some invalid + * PEX_CONFIG_ADDR/PEX_CONFIG_DATA, edac driver prints the much + * notice information. So disable this detect to fix ugly print. + */ + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0 + & ~PEX_ERR_ICCAIE_EN_BIT); + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, 0 + | PEX_ERR_ICCAD_DISR_BIT); + } + + devres_remove_group(&op->dev, mpc85xx_pci_err_probe); + edac_dbg(3, "success\n"); + pr_info(EDAC_MOD_STR " PCI err registered\n"); + + return 0; + +err2: + edac_pci_del_device(&op->dev); +err: + edac_pci_free_ctl_info(pci); + devres_release_group(&op->dev, mpc85xx_pci_err_probe); + return res; +} + +static int mpc85xx_pci_err_remove(struct platform_device *op) +{ + struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev); + struct mpc85xx_pci_pdata *pdata = pci->pvt_info; + + edac_dbg(0, "\n"); + + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, orig_pci_err_cap_dr); + out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, orig_pci_err_en); + + edac_pci_del_device(&op->dev); + edac_pci_free_ctl_info(pci); + + return 0; +} + +static const struct platform_device_id mpc85xx_pci_err_match[] = { + { + .name = "mpc85xx-pci-edac" + }, + {} +}; + +static struct platform_driver mpc85xx_pci_err_driver = { + .probe = mpc85xx_pci_err_probe, + .remove = mpc85xx_pci_err_remove, + .id_table = mpc85xx_pci_err_match, + .driver = { + .name = "mpc85xx_pci_err", + .suppress_bind_attrs = true, + }, +}; +#endif /* CONFIG_PCI */ + +/**************************** L2 Err device ***************************/ + +/************************ L2 SYSFS parts ***********************************/ + +static ssize_t mpc85xx_l2_inject_data_hi_show(struct edac_device_ctl_info + *edac_dev, char *data) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + return sprintf(data, "0x%08x", + in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI)); +} + +static ssize_t mpc85xx_l2_inject_data_lo_show(struct edac_device_ctl_info + *edac_dev, char *data) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + return sprintf(data, "0x%08x", + in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO)); +} + +static ssize_t mpc85xx_l2_inject_ctrl_show(struct edac_device_ctl_info + *edac_dev, char *data) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + return sprintf(data, "0x%08x", + in_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL)); +} + +static ssize_t mpc85xx_l2_inject_data_hi_store(struct edac_device_ctl_info + *edac_dev, const char *data, + size_t count) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + if (isdigit(*data)) { + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJHI, + simple_strtoul(data, NULL, 0)); + return count; + } + return 0; +} + +static ssize_t mpc85xx_l2_inject_data_lo_store(struct edac_device_ctl_info + *edac_dev, const char *data, + size_t count) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + if (isdigit(*data)) { + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJLO, + simple_strtoul(data, NULL, 0)); + return count; + } + return 0; +} + +static ssize_t mpc85xx_l2_inject_ctrl_store(struct edac_device_ctl_info + *edac_dev, const char *data, + size_t count) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + if (isdigit(*data)) { + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINJCTL, + simple_strtoul(data, NULL, 0)); + return count; + } + return 0; +} + +static struct edac_dev_sysfs_attribute mpc85xx_l2_sysfs_attributes[] = { + { + .attr = { + .name = "inject_data_hi", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = mpc85xx_l2_inject_data_hi_show, + .store = mpc85xx_l2_inject_data_hi_store}, + { + .attr = { + .name = "inject_data_lo", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = mpc85xx_l2_inject_data_lo_show, + .store = mpc85xx_l2_inject_data_lo_store}, + { + .attr = { + .name = "inject_ctrl", + .mode = (S_IRUGO | S_IWUSR) + }, + .show = mpc85xx_l2_inject_ctrl_show, + .store = mpc85xx_l2_inject_ctrl_store}, + + /* End of list */ + { + .attr = {.name = NULL} + } +}; + +static void mpc85xx_set_l2_sysfs_attributes(struct edac_device_ctl_info + *edac_dev) +{ + edac_dev->sysfs_attributes = mpc85xx_l2_sysfs_attributes; +} + +/***************************** L2 ops ***********************************/ + +static void mpc85xx_l2_check(struct edac_device_ctl_info *edac_dev) +{ + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + u32 err_detect; + + err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); + + if (!(err_detect & L2_EDE_MASK)) + return; + + pr_err("ECC Error in CPU L2 cache\n"); + pr_err("L2 Error Detect Register: 0x%08x\n", err_detect); + pr_err("L2 Error Capture Data High Register: 0x%08x\n", + in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATAHI)); + pr_err("L2 Error Capture Data Lo Register: 0x%08x\n", + in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTDATALO)); + pr_err("L2 Error Syndrome Register: 0x%08x\n", + in_be32(pdata->l2_vbase + MPC85XX_L2_CAPTECC)); + pr_err("L2 Error Attributes Capture Register: 0x%08x\n", + in_be32(pdata->l2_vbase + MPC85XX_L2_ERRATTR)); + pr_err("L2 Error Address Capture Register: 0x%08x\n", + in_be32(pdata->l2_vbase + MPC85XX_L2_ERRADDR)); + + /* clear error detect register */ + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, err_detect); + + if (err_detect & L2_EDE_CE_MASK) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + + if (err_detect & L2_EDE_UE_MASK) + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static irqreturn_t mpc85xx_l2_isr(int irq, void *dev_id) +{ + struct edac_device_ctl_info *edac_dev = dev_id; + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + u32 err_detect; + + err_detect = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET); + + if (!(err_detect & L2_EDE_MASK)) + return IRQ_NONE; + + mpc85xx_l2_check(edac_dev); + + return IRQ_HANDLED; +} + +static int mpc85xx_l2_err_probe(struct platform_device *op) +{ + struct edac_device_ctl_info *edac_dev; + struct mpc85xx_l2_pdata *pdata; + struct resource r; + int res; + + if (!devres_open_group(&op->dev, mpc85xx_l2_err_probe, GFP_KERNEL)) + return -ENOMEM; + + edac_dev = edac_device_alloc_ctl_info(sizeof(*pdata), + "cpu", 1, "L", 1, 2, NULL, 0, + edac_dev_idx); + if (!edac_dev) { + devres_release_group(&op->dev, mpc85xx_l2_err_probe); + return -ENOMEM; + } + + pdata = edac_dev->pvt_info; + pdata->name = "mpc85xx_l2_err"; + edac_dev->dev = &op->dev; + dev_set_drvdata(edac_dev->dev, edac_dev); + edac_dev->ctl_name = pdata->name; + edac_dev->dev_name = pdata->name; + + res = of_address_to_resource(op->dev.of_node, 0, &r); + if (res) { + pr_err("%s: Unable to get resource for L2 err regs\n", __func__); + goto err; + } + + /* we only need the error registers */ + r.start += 0xe00; + + if (!devm_request_mem_region(&op->dev, r.start, resource_size(&r), + pdata->name)) { + pr_err("%s: Error while requesting mem region\n", __func__); + res = -EBUSY; + goto err; + } + + pdata->l2_vbase = devm_ioremap(&op->dev, r.start, resource_size(&r)); + if (!pdata->l2_vbase) { + pr_err("%s: Unable to setup L2 err regs\n", __func__); + res = -ENOMEM; + goto err; + } + + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDET, ~0); + + orig_l2_err_disable = in_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS); + + /* clear the err_dis */ + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, 0); + + edac_dev->mod_name = EDAC_MOD_STR; + + if (edac_op_state == EDAC_OPSTATE_POLL) + edac_dev->edac_check = mpc85xx_l2_check; + + mpc85xx_set_l2_sysfs_attributes(edac_dev); + + pdata->edac_idx = edac_dev_idx++; + + if (edac_device_add_device(edac_dev) > 0) { + edac_dbg(3, "failed edac_device_add_device()\n"); + goto err; + } + + if (edac_op_state == EDAC_OPSTATE_INT) { + pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0); + res = devm_request_irq(&op->dev, pdata->irq, + mpc85xx_l2_isr, IRQF_SHARED, + "[EDAC] L2 err", edac_dev); + if (res < 0) { + pr_err("%s: Unable to request irq %d for MPC85xx L2 err\n", + __func__, pdata->irq); + irq_dispose_mapping(pdata->irq); + res = -ENODEV; + goto err2; + } + + pr_info(EDAC_MOD_STR " acquired irq %d for L2 Err\n", pdata->irq); + + edac_dev->op_state = OP_RUNNING_INTERRUPT; + + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, L2_EIE_MASK); + } + + devres_remove_group(&op->dev, mpc85xx_l2_err_probe); + + edac_dbg(3, "success\n"); + pr_info(EDAC_MOD_STR " L2 err registered\n"); + + return 0; + +err2: + edac_device_del_device(&op->dev); +err: + devres_release_group(&op->dev, mpc85xx_l2_err_probe); + edac_device_free_ctl_info(edac_dev); + return res; +} + +static int mpc85xx_l2_err_remove(struct platform_device *op) +{ + struct edac_device_ctl_info *edac_dev = dev_get_drvdata(&op->dev); + struct mpc85xx_l2_pdata *pdata = edac_dev->pvt_info; + + edac_dbg(0, "\n"); + + if (edac_op_state == EDAC_OPSTATE_INT) { + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRINTEN, 0); + irq_dispose_mapping(pdata->irq); + } + + out_be32(pdata->l2_vbase + MPC85XX_L2_ERRDIS, orig_l2_err_disable); + edac_device_del_device(&op->dev); + edac_device_free_ctl_info(edac_dev); + return 0; +} + +static const struct of_device_id mpc85xx_l2_err_of_match[] = { + { .compatible = "fsl,mpc8536-l2-cache-controller", }, + { .compatible = "fsl,mpc8540-l2-cache-controller", }, + { .compatible = "fsl,mpc8541-l2-cache-controller", }, + { .compatible = "fsl,mpc8544-l2-cache-controller", }, + { .compatible = "fsl,mpc8548-l2-cache-controller", }, + { .compatible = "fsl,mpc8555-l2-cache-controller", }, + { .compatible = "fsl,mpc8560-l2-cache-controller", }, + { .compatible = "fsl,mpc8568-l2-cache-controller", }, + { .compatible = "fsl,mpc8569-l2-cache-controller", }, + { .compatible = "fsl,mpc8572-l2-cache-controller", }, + { .compatible = "fsl,p1020-l2-cache-controller", }, + { .compatible = "fsl,p1021-l2-cache-controller", }, + { .compatible = "fsl,p2020-l2-cache-controller", }, + { .compatible = "fsl,t2080-l2-cache-controller", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc85xx_l2_err_of_match); + +static struct platform_driver mpc85xx_l2_err_driver = { + .probe = mpc85xx_l2_err_probe, + .remove = mpc85xx_l2_err_remove, + .driver = { + .name = "mpc85xx_l2_err", + .of_match_table = mpc85xx_l2_err_of_match, + }, +}; + +static const struct of_device_id mpc85xx_mc_err_of_match[] = { + { .compatible = "fsl,mpc8536-memory-controller", }, + { .compatible = "fsl,mpc8540-memory-controller", }, + { .compatible = "fsl,mpc8541-memory-controller", }, + { .compatible = "fsl,mpc8544-memory-controller", }, + { .compatible = "fsl,mpc8548-memory-controller", }, + { .compatible = "fsl,mpc8555-memory-controller", }, + { .compatible = "fsl,mpc8560-memory-controller", }, + { .compatible = "fsl,mpc8568-memory-controller", }, + { .compatible = "fsl,mpc8569-memory-controller", }, + { .compatible = "fsl,mpc8572-memory-controller", }, + { .compatible = "fsl,mpc8349-memory-controller", }, + { .compatible = "fsl,p1020-memory-controller", }, + { .compatible = "fsl,p1021-memory-controller", }, + { .compatible = "fsl,p2020-memory-controller", }, + { .compatible = "fsl,qoriq-memory-controller", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpc85xx_mc_err_of_match); + +static struct platform_driver mpc85xx_mc_err_driver = { + .probe = fsl_mc_err_probe, + .remove = fsl_mc_err_remove, + .driver = { + .name = "mpc85xx_mc_err", + .of_match_table = mpc85xx_mc_err_of_match, + }, +}; + +static struct platform_driver * const drivers[] = { + &mpc85xx_mc_err_driver, + &mpc85xx_l2_err_driver, +#ifdef CONFIG_PCI + &mpc85xx_pci_err_driver, +#endif +}; + +static int __init mpc85xx_mc_init(void) +{ + int res = 0; + u32 __maybe_unused pvr = 0; + + pr_info("Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software\n"); + + /* make sure error reporting method is sane */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + res = platform_register_drivers(drivers, ARRAY_SIZE(drivers)); + if (res) + pr_warn(EDAC_MOD_STR "drivers fail to register\n"); + + return 0; +} + +module_init(mpc85xx_mc_init); + +static void __exit mpc85xx_mc_exit(void) +{ + platform_unregister_drivers(drivers, ARRAY_SIZE(drivers)); +} + +module_exit(mpc85xx_mc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Montavista Software, Inc."); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, + "EDAC Error Reporting state: 0=Poll, 2=Interrupt"); diff --git a/drivers/edac/mpc85xx_edac.h b/drivers/edac/mpc85xx_edac.h new file mode 100644 index 000000000..66a046ae3 --- /dev/null +++ b/drivers/edac/mpc85xx_edac.h @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Freescale MPC85xx Memory Controller kernel module + * Author: Dave Jiang <djiang@mvista.com> + * + * 2006-2007 (c) MontaVista Software, Inc. + */ +#ifndef _MPC85XX_EDAC_H_ +#define _MPC85XX_EDAC_H_ + +#define MPC85XX_REVISION " Ver: 2.0.0" +#define EDAC_MOD_STR "MPC85xx_edac" + +#define mpc85xx_printk(level, fmt, arg...) \ + edac_printk(level, "MPC85xx", fmt, ##arg) + +/* + * L2 Err defines + */ +#define MPC85XX_L2_ERRINJHI 0x0000 +#define MPC85XX_L2_ERRINJLO 0x0004 +#define MPC85XX_L2_ERRINJCTL 0x0008 +#define MPC85XX_L2_CAPTDATAHI 0x0020 +#define MPC85XX_L2_CAPTDATALO 0x0024 +#define MPC85XX_L2_CAPTECC 0x0028 +#define MPC85XX_L2_ERRDET 0x0040 +#define MPC85XX_L2_ERRDIS 0x0044 +#define MPC85XX_L2_ERRINTEN 0x0048 +#define MPC85XX_L2_ERRATTR 0x004c +#define MPC85XX_L2_ERRADDR 0x0050 +#define MPC85XX_L2_ERRCTL 0x0058 + +/* Error Interrupt Enable */ +#define L2_EIE_L2CFGINTEN 0x1 +#define L2_EIE_SBECCINTEN 0x4 +#define L2_EIE_MBECCINTEN 0x8 +#define L2_EIE_TPARINTEN 0x10 +#define L2_EIE_MASK (L2_EIE_L2CFGINTEN | L2_EIE_SBECCINTEN | \ + L2_EIE_MBECCINTEN | L2_EIE_TPARINTEN) + +/* Error Detect */ +#define L2_EDE_L2CFGERR 0x1 +#define L2_EDE_SBECCERR 0x4 +#define L2_EDE_MBECCERR 0x8 +#define L2_EDE_TPARERR 0x10 +#define L2_EDE_MULL2ERR 0x80000000 + +#define L2_EDE_CE_MASK L2_EDE_SBECCERR +#define L2_EDE_UE_MASK (L2_EDE_L2CFGERR | L2_EDE_MBECCERR | \ + L2_EDE_TPARERR) +#define L2_EDE_MASK (L2_EDE_L2CFGERR | L2_EDE_SBECCERR | \ + L2_EDE_MBECCERR | L2_EDE_TPARERR | L2_EDE_MULL2ERR) + +/* + * PCI Err defines + */ +#define PCI_EDE_TOE 0x00000001 +#define PCI_EDE_SCM 0x00000002 +#define PCI_EDE_IRMSV 0x00000004 +#define PCI_EDE_ORMSV 0x00000008 +#define PCI_EDE_OWMSV 0x00000010 +#define PCI_EDE_TGT_ABRT 0x00000020 +#define PCI_EDE_MST_ABRT 0x00000040 +#define PCI_EDE_TGT_PERR 0x00000080 +#define PCI_EDE_MST_PERR 0x00000100 +#define PCI_EDE_RCVD_SERR 0x00000200 +#define PCI_EDE_ADDR_PERR 0x00000400 +#define PCI_EDE_MULTI_ERR 0x80000000 + +#define PCI_EDE_PERR_MASK (PCI_EDE_TGT_PERR | PCI_EDE_MST_PERR | \ + PCI_EDE_ADDR_PERR) + +#define MPC85XX_PCI_ERR_DR 0x0000 +#define MPC85XX_PCI_ERR_CAP_DR 0x0004 +#define MPC85XX_PCI_ERR_EN 0x0008 +#define PEX_ERR_ICCAIE_EN_BIT 0x00020000 +#define MPC85XX_PCI_ERR_ATTRIB 0x000c +#define MPC85XX_PCI_ERR_ADDR 0x0010 +#define PEX_ERR_ICCAD_DISR_BIT 0x00020000 +#define MPC85XX_PCI_ERR_EXT_ADDR 0x0014 +#define MPC85XX_PCI_ERR_DL 0x0018 +#define MPC85XX_PCI_ERR_DH 0x001c +#define MPC85XX_PCI_GAS_TIMR 0x0020 +#define MPC85XX_PCI_PCIX_TIMR 0x0024 +#define MPC85XX_PCIE_ERR_CAP_R0 0x0028 +#define MPC85XX_PCIE_ERR_CAP_R1 0x002c +#define MPC85XX_PCIE_ERR_CAP_R2 0x0030 +#define MPC85XX_PCIE_ERR_CAP_R3 0x0034 + +struct mpc85xx_l2_pdata { + char *name; + int edac_idx; + void __iomem *l2_vbase; + int irq; +}; + +struct mpc85xx_pci_pdata { + char *name; + bool is_pcie; + int edac_idx; + void __iomem *pci_vbase; + int irq; +}; + +#endif diff --git a/drivers/edac/octeon_edac-l2c.c b/drivers/edac/octeon_edac-l2c.c new file mode 100644 index 000000000..c33059e9b --- /dev/null +++ b/drivers/edac/octeon_edac-l2c.c @@ -0,0 +1,207 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 Cavium, Inc. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/edac.h> + +#include <asm/octeon/cvmx.h> + +#include "edac_module.h" + +#define EDAC_MOD_STR "octeon-l2c" + +static void octeon_l2c_poll_oct1(struct edac_device_ctl_info *l2c) +{ + union cvmx_l2t_err l2t_err, l2t_err_reset; + union cvmx_l2d_err l2d_err, l2d_err_reset; + + l2t_err_reset.u64 = 0; + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + if (l2t_err.s.sec_err) { + edac_device_handle_ce(l2c, 0, 0, + "Tag Single bit error (corrected)"); + l2t_err_reset.s.sec_err = 1; + } + if (l2t_err.s.ded_err) { + edac_device_handle_ue(l2c, 0, 0, + "Tag Double bit error (detected)"); + l2t_err_reset.s.ded_err = 1; + } + if (l2t_err_reset.u64) + cvmx_write_csr(CVMX_L2T_ERR, l2t_err_reset.u64); + + l2d_err_reset.u64 = 0; + l2d_err.u64 = cvmx_read_csr(CVMX_L2D_ERR); + if (l2d_err.s.sec_err) { + edac_device_handle_ce(l2c, 0, 1, + "Data Single bit error (corrected)"); + l2d_err_reset.s.sec_err = 1; + } + if (l2d_err.s.ded_err) { + edac_device_handle_ue(l2c, 0, 1, + "Data Double bit error (detected)"); + l2d_err_reset.s.ded_err = 1; + } + if (l2d_err_reset.u64) + cvmx_write_csr(CVMX_L2D_ERR, l2d_err_reset.u64); + +} + +static void _octeon_l2c_poll_oct2(struct edac_device_ctl_info *l2c, int tad) +{ + union cvmx_l2c_err_tdtx err_tdtx, err_tdtx_reset; + union cvmx_l2c_err_ttgx err_ttgx, err_ttgx_reset; + char buf1[64]; + char buf2[80]; + + err_tdtx_reset.u64 = 0; + err_tdtx.u64 = cvmx_read_csr(CVMX_L2C_ERR_TDTX(tad)); + if (err_tdtx.s.dbe || err_tdtx.s.sbe || + err_tdtx.s.vdbe || err_tdtx.s.vsbe) + snprintf(buf1, sizeof(buf1), + "type:%d, syn:0x%x, way:%d", + err_tdtx.s.type, err_tdtx.s.syn, err_tdtx.s.wayidx); + + if (err_tdtx.s.dbe) { + snprintf(buf2, sizeof(buf2), + "L2D Double bit error (detected):%s", buf1); + err_tdtx_reset.s.dbe = 1; + edac_device_handle_ue(l2c, tad, 1, buf2); + } + if (err_tdtx.s.sbe) { + snprintf(buf2, sizeof(buf2), + "L2D Single bit error (corrected):%s", buf1); + err_tdtx_reset.s.sbe = 1; + edac_device_handle_ce(l2c, tad, 1, buf2); + } + if (err_tdtx.s.vdbe) { + snprintf(buf2, sizeof(buf2), + "VBF Double bit error (detected):%s", buf1); + err_tdtx_reset.s.vdbe = 1; + edac_device_handle_ue(l2c, tad, 1, buf2); + } + if (err_tdtx.s.vsbe) { + snprintf(buf2, sizeof(buf2), + "VBF Single bit error (corrected):%s", buf1); + err_tdtx_reset.s.vsbe = 1; + edac_device_handle_ce(l2c, tad, 1, buf2); + } + if (err_tdtx_reset.u64) + cvmx_write_csr(CVMX_L2C_ERR_TDTX(tad), err_tdtx_reset.u64); + + err_ttgx_reset.u64 = 0; + err_ttgx.u64 = cvmx_read_csr(CVMX_L2C_ERR_TTGX(tad)); + + if (err_ttgx.s.dbe || err_ttgx.s.sbe) + snprintf(buf1, sizeof(buf1), + "type:%d, syn:0x%x, way:%d", + err_ttgx.s.type, err_ttgx.s.syn, err_ttgx.s.wayidx); + + if (err_ttgx.s.dbe) { + snprintf(buf2, sizeof(buf2), + "Tag Double bit error (detected):%s", buf1); + err_ttgx_reset.s.dbe = 1; + edac_device_handle_ue(l2c, tad, 0, buf2); + } + if (err_ttgx.s.sbe) { + snprintf(buf2, sizeof(buf2), + "Tag Single bit error (corrected):%s", buf1); + err_ttgx_reset.s.sbe = 1; + edac_device_handle_ce(l2c, tad, 0, buf2); + } + if (err_ttgx_reset.u64) + cvmx_write_csr(CVMX_L2C_ERR_TTGX(tad), err_ttgx_reset.u64); +} + +static void octeon_l2c_poll_oct2(struct edac_device_ctl_info *l2c) +{ + int i; + for (i = 0; i < l2c->nr_instances; i++) + _octeon_l2c_poll_oct2(l2c, i); +} + +static int octeon_l2c_probe(struct platform_device *pdev) +{ + struct edac_device_ctl_info *l2c; + + int num_tads = OCTEON_IS_MODEL(OCTEON_CN68XX) ? 4 : 1; + + /* 'Tags' are block 0, 'Data' is block 1*/ + l2c = edac_device_alloc_ctl_info(0, "l2c", num_tads, "l2c", 2, 0, + NULL, 0, edac_device_alloc_index()); + if (!l2c) + return -ENOMEM; + + l2c->dev = &pdev->dev; + platform_set_drvdata(pdev, l2c); + l2c->dev_name = dev_name(&pdev->dev); + + l2c->mod_name = "octeon-l2c"; + l2c->ctl_name = "octeon_l2c_err"; + + + if (OCTEON_IS_OCTEON1PLUS()) { + union cvmx_l2t_err l2t_err; + union cvmx_l2d_err l2d_err; + + l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR); + l2t_err.s.sec_intena = 0; /* We poll */ + l2t_err.s.ded_intena = 0; + cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64); + + l2d_err.u64 = cvmx_read_csr(CVMX_L2D_ERR); + l2d_err.s.sec_intena = 0; /* We poll */ + l2d_err.s.ded_intena = 0; + cvmx_write_csr(CVMX_L2T_ERR, l2d_err.u64); + + l2c->edac_check = octeon_l2c_poll_oct1; + } else { + /* OCTEON II */ + l2c->edac_check = octeon_l2c_poll_oct2; + } + + if (edac_device_add_device(l2c) > 0) { + pr_err("%s: edac_device_add_device() failed\n", __func__); + goto err; + } + + + return 0; + +err: + edac_device_free_ctl_info(l2c); + + return -ENXIO; +} + +static int octeon_l2c_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *l2c = platform_get_drvdata(pdev); + + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(l2c); + + return 0; +} + +static struct platform_driver octeon_l2c_driver = { + .probe = octeon_l2c_probe, + .remove = octeon_l2c_remove, + .driver = { + .name = "octeon_l2c_edac", + } +}; +module_platform_driver(octeon_l2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); diff --git a/drivers/edac/octeon_edac-lmc.c b/drivers/edac/octeon_edac-lmc.c new file mode 100644 index 000000000..aeb222ca3 --- /dev/null +++ b/drivers/edac/octeon_edac-lmc.c @@ -0,0 +1,324 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + * + * Copyright (c) 2013 by Cisco Systems, Inc. + * All rights reserved. + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/edac.h> +#include <linux/ctype.h> + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-lmcx-defs.h> + +#include "edac_module.h" + +#define OCTEON_MAX_MC 4 + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +struct octeon_lmc_pvt { + unsigned long inject; + unsigned long error_type; + unsigned long dimm; + unsigned long rank; + unsigned long bank; + unsigned long row; + unsigned long col; +}; + +static void octeon_lmc_edac_poll(struct mem_ctl_info *mci) +{ + union cvmx_lmcx_mem_cfg0 cfg0; + bool do_clear = false; + char msg[64]; + + cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx)); + if (cfg0.s.sec_err || cfg0.s.ded_err) { + union cvmx_lmcx_fadr fadr; + fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx)); + snprintf(msg, sizeof(msg), + "DIMM %d rank %d bank %d row %d col %d", + fadr.cn30xx.fdimm, fadr.cn30xx.fbunk, + fadr.cn30xx.fbank, fadr.cn30xx.frow, fadr.cn30xx.fcol); + } + + if (cfg0.s.sec_err) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, msg, ""); + cfg0.s.sec_err = -1; /* Done, re-arm */ + do_clear = true; + } + + if (cfg0.s.ded_err) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, msg, ""); + cfg0.s.ded_err = -1; /* Done, re-arm */ + do_clear = true; + } + if (do_clear) + cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mci->mc_idx), cfg0.u64); +} + +static void octeon_lmc_edac_poll_o2(struct mem_ctl_info *mci) +{ + struct octeon_lmc_pvt *pvt = mci->pvt_info; + union cvmx_lmcx_int int_reg; + bool do_clear = false; + char msg[64]; + + if (!pvt->inject) + int_reg.u64 = cvmx_read_csr(CVMX_LMCX_INT(mci->mc_idx)); + else { + int_reg.u64 = 0; + if (pvt->error_type == 1) + int_reg.s.sec_err = 1; + if (pvt->error_type == 2) + int_reg.s.ded_err = 1; + } + + if (int_reg.s.sec_err || int_reg.s.ded_err) { + union cvmx_lmcx_fadr fadr; + if (likely(!pvt->inject)) + fadr.u64 = cvmx_read_csr(CVMX_LMCX_FADR(mci->mc_idx)); + else { + fadr.cn61xx.fdimm = pvt->dimm; + fadr.cn61xx.fbunk = pvt->rank; + fadr.cn61xx.fbank = pvt->bank; + fadr.cn61xx.frow = pvt->row; + fadr.cn61xx.fcol = pvt->col; + } + snprintf(msg, sizeof(msg), + "DIMM %d rank %d bank %d row %d col %d", + fadr.cn61xx.fdimm, fadr.cn61xx.fbunk, + fadr.cn61xx.fbank, fadr.cn61xx.frow, fadr.cn61xx.fcol); + } + + if (int_reg.s.sec_err) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, msg, ""); + int_reg.s.sec_err = -1; /* Done, re-arm */ + do_clear = true; + } + + if (int_reg.s.ded_err) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, msg, ""); + int_reg.s.ded_err = -1; /* Done, re-arm */ + do_clear = true; + } + + if (do_clear) { + if (likely(!pvt->inject)) + cvmx_write_csr(CVMX_LMCX_INT(mci->mc_idx), int_reg.u64); + else + pvt->inject = 0; + } +} + +/************************ MC SYSFS parts ***********************************/ + +/* Only a couple naming differences per template, so very similar */ +#define TEMPLATE_SHOW(reg) \ +static ssize_t octeon_mc_inject_##reg##_show(struct device *dev, \ + struct device_attribute *attr, \ + char *data) \ +{ \ + struct mem_ctl_info *mci = to_mci(dev); \ + struct octeon_lmc_pvt *pvt = mci->pvt_info; \ + return sprintf(data, "%016llu\n", (u64)pvt->reg); \ +} + +#define TEMPLATE_STORE(reg) \ +static ssize_t octeon_mc_inject_##reg##_store(struct device *dev, \ + struct device_attribute *attr, \ + const char *data, size_t count) \ +{ \ + struct mem_ctl_info *mci = to_mci(dev); \ + struct octeon_lmc_pvt *pvt = mci->pvt_info; \ + if (isdigit(*data)) { \ + if (!kstrtoul(data, 0, &pvt->reg)) \ + return count; \ + } \ + return 0; \ +} + +TEMPLATE_SHOW(inject); +TEMPLATE_STORE(inject); +TEMPLATE_SHOW(dimm); +TEMPLATE_STORE(dimm); +TEMPLATE_SHOW(bank); +TEMPLATE_STORE(bank); +TEMPLATE_SHOW(rank); +TEMPLATE_STORE(rank); +TEMPLATE_SHOW(row); +TEMPLATE_STORE(row); +TEMPLATE_SHOW(col); +TEMPLATE_STORE(col); + +static ssize_t octeon_mc_inject_error_type_store(struct device *dev, + struct device_attribute *attr, + const char *data, + size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct octeon_lmc_pvt *pvt = mci->pvt_info; + + if (!strncmp(data, "single", 6)) + pvt->error_type = 1; + else if (!strncmp(data, "double", 6)) + pvt->error_type = 2; + + return count; +} + +static ssize_t octeon_mc_inject_error_type_show(struct device *dev, + struct device_attribute *attr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct octeon_lmc_pvt *pvt = mci->pvt_info; + if (pvt->error_type == 1) + return sprintf(data, "single"); + else if (pvt->error_type == 2) + return sprintf(data, "double"); + + return 0; +} + +static DEVICE_ATTR(inject, S_IRUGO | S_IWUSR, + octeon_mc_inject_inject_show, octeon_mc_inject_inject_store); +static DEVICE_ATTR(error_type, S_IRUGO | S_IWUSR, + octeon_mc_inject_error_type_show, octeon_mc_inject_error_type_store); +static DEVICE_ATTR(dimm, S_IRUGO | S_IWUSR, + octeon_mc_inject_dimm_show, octeon_mc_inject_dimm_store); +static DEVICE_ATTR(rank, S_IRUGO | S_IWUSR, + octeon_mc_inject_rank_show, octeon_mc_inject_rank_store); +static DEVICE_ATTR(bank, S_IRUGO | S_IWUSR, + octeon_mc_inject_bank_show, octeon_mc_inject_bank_store); +static DEVICE_ATTR(row, S_IRUGO | S_IWUSR, + octeon_mc_inject_row_show, octeon_mc_inject_row_store); +static DEVICE_ATTR(col, S_IRUGO | S_IWUSR, + octeon_mc_inject_col_show, octeon_mc_inject_col_store); + +static struct attribute *octeon_dev_attrs[] = { + &dev_attr_inject.attr, + &dev_attr_error_type.attr, + &dev_attr_dimm.attr, + &dev_attr_rank.attr, + &dev_attr_bank.attr, + &dev_attr_row.attr, + &dev_attr_col.attr, + NULL +}; + +ATTRIBUTE_GROUPS(octeon_dev); + +static int octeon_lmc_edac_probe(struct platform_device *pdev) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[1]; + int mc = pdev->id; + + opstate_init(); + + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = 1; + layers[0].is_virt_csrow = false; + + if (OCTEON_IS_OCTEON1PLUS()) { + union cvmx_lmcx_mem_cfg0 cfg0; + + cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(0)); + if (!cfg0.s.ecc_ena) { + dev_info(&pdev->dev, "Disabled (ECC not enabled)\n"); + return 0; + } + + mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt)); + if (!mci) + return -ENXIO; + + mci->pdev = &pdev->dev; + mci->dev_name = dev_name(&pdev->dev); + + mci->mod_name = "octeon-lmc"; + mci->ctl_name = "octeon-lmc-err"; + mci->edac_check = octeon_lmc_edac_poll; + + if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) { + dev_err(&pdev->dev, "edac_mc_add_mc() failed\n"); + edac_mc_free(mci); + return -ENXIO; + } + + cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc)); + cfg0.s.intr_ded_ena = 0; /* We poll */ + cfg0.s.intr_sec_ena = 0; + cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), cfg0.u64); + } else { + /* OCTEON II */ + union cvmx_lmcx_int_en en; + union cvmx_lmcx_config config; + + config.u64 = cvmx_read_csr(CVMX_LMCX_CONFIG(0)); + if (!config.s.ecc_ena) { + dev_info(&pdev->dev, "Disabled (ECC not enabled)\n"); + return 0; + } + + mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt)); + if (!mci) + return -ENXIO; + + mci->pdev = &pdev->dev; + mci->dev_name = dev_name(&pdev->dev); + + mci->mod_name = "octeon-lmc"; + mci->ctl_name = "co_lmc_err"; + mci->edac_check = octeon_lmc_edac_poll_o2; + + if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) { + dev_err(&pdev->dev, "edac_mc_add_mc() failed\n"); + edac_mc_free(mci); + return -ENXIO; + } + + en.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc)); + en.s.intr_ded_ena = 0; /* We poll */ + en.s.intr_sec_ena = 0; + cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), en.u64); + } + platform_set_drvdata(pdev, mci); + + return 0; +} + +static int octeon_lmc_edac_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + return 0; +} + +static struct platform_driver octeon_lmc_edac_driver = { + .probe = octeon_lmc_edac_probe, + .remove = octeon_lmc_edac_remove, + .driver = { + .name = "octeon_lmc_edac", + } +}; +module_platform_driver(octeon_lmc_edac_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); diff --git a/drivers/edac/octeon_edac-pc.c b/drivers/edac/octeon_edac-pc.c new file mode 100644 index 000000000..754eced59 --- /dev/null +++ b/drivers/edac/octeon_edac-pc.c @@ -0,0 +1,142 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 Cavium, Inc. + * + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/edac.h> + +#include "edac_module.h" + +#include <asm/octeon/cvmx.h> +#include <asm/mipsregs.h> + +extern int register_co_cache_error_notifier(struct notifier_block *nb); +extern int unregister_co_cache_error_notifier(struct notifier_block *nb); + +extern unsigned long long cache_err_dcache[NR_CPUS]; + +struct co_cache_error { + struct notifier_block notifier; + struct edac_device_ctl_info *ed; +}; + +/** + * EDAC CPU cache error callback + * + * @event: non-zero if unrecoverable. + */ +static int co_cache_error_event(struct notifier_block *this, + unsigned long event, void *ptr) +{ + struct co_cache_error *p = container_of(this, struct co_cache_error, + notifier); + + unsigned int core = cvmx_get_core_num(); + unsigned int cpu = smp_processor_id(); + u64 icache_err = read_octeon_c0_icacheerr(); + u64 dcache_err; + + if (event) { + dcache_err = cache_err_dcache[core]; + cache_err_dcache[core] = 0; + } else { + dcache_err = read_octeon_c0_dcacheerr(); + } + + if (icache_err & 1) { + edac_device_printk(p->ed, KERN_ERR, + "CacheErr (Icache):%llx, core %d/cpu %d, cp0_errorepc == %lx\n", + (unsigned long long)icache_err, core, cpu, + read_c0_errorepc()); + write_octeon_c0_icacheerr(0); + edac_device_handle_ce(p->ed, cpu, 1, "icache"); + } + if (dcache_err & 1) { + edac_device_printk(p->ed, KERN_ERR, + "CacheErr (Dcache):%llx, core %d/cpu %d, cp0_errorepc == %lx\n", + (unsigned long long)dcache_err, core, cpu, + read_c0_errorepc()); + if (event) + edac_device_handle_ue(p->ed, cpu, 0, "dcache"); + else + edac_device_handle_ce(p->ed, cpu, 0, "dcache"); + + /* Clear the error indication */ + if (OCTEON_IS_OCTEON2()) + write_octeon_c0_dcacheerr(1); + else + write_octeon_c0_dcacheerr(0); + } + + return NOTIFY_STOP; +} + +static int co_cache_error_probe(struct platform_device *pdev) +{ + struct co_cache_error *p = devm_kzalloc(&pdev->dev, sizeof(*p), + GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->notifier.notifier_call = co_cache_error_event; + platform_set_drvdata(pdev, p); + + p->ed = edac_device_alloc_ctl_info(0, "cpu", num_possible_cpus(), + "cache", 2, 0, NULL, 0, + edac_device_alloc_index()); + if (!p->ed) + goto err; + + p->ed->dev = &pdev->dev; + + p->ed->dev_name = dev_name(&pdev->dev); + + p->ed->mod_name = "octeon-cpu"; + p->ed->ctl_name = "cache"; + + if (edac_device_add_device(p->ed)) { + pr_err("%s: edac_device_add_device() failed\n", __func__); + goto err1; + } + + register_co_cache_error_notifier(&p->notifier); + + return 0; + +err1: + edac_device_free_ctl_info(p->ed); +err: + return -ENXIO; +} + +static int co_cache_error_remove(struct platform_device *pdev) +{ + struct co_cache_error *p = platform_get_drvdata(pdev); + + unregister_co_cache_error_notifier(&p->notifier); + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(p->ed); + return 0; +} + +static struct platform_driver co_cache_error_driver = { + .probe = co_cache_error_probe, + .remove = co_cache_error_remove, + .driver = { + .name = "octeon_pc_edac", + } +}; +module_platform_driver(co_cache_error_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); diff --git a/drivers/edac/octeon_edac-pci.c b/drivers/edac/octeon_edac-pci.c new file mode 100644 index 000000000..28b238eec --- /dev/null +++ b/drivers/edac/octeon_edac-pci.c @@ -0,0 +1,110 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2012 Cavium, Inc. + * Copyright (C) 2009 Wind River Systems, + * written by Ralf Baechle <ralf@linux-mips.org> + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/edac.h> + +#include <asm/octeon/cvmx.h> +#include <asm/octeon/cvmx-npi-defs.h> +#include <asm/octeon/cvmx-pci-defs.h> +#include <asm/octeon/octeon.h> + +#include "edac_module.h" + +static void octeon_pci_poll(struct edac_pci_ctl_info *pci) +{ + union cvmx_pci_cfg01 cfg01; + + cfg01.u32 = octeon_npi_read32(CVMX_NPI_PCI_CFG01); + if (cfg01.s.dpe) { /* Detected parity error */ + edac_pci_handle_pe(pci, pci->ctl_name); + cfg01.s.dpe = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } + if (cfg01.s.sse) { + edac_pci_handle_npe(pci, "Signaled System Error"); + cfg01.s.sse = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } + if (cfg01.s.rma) { + edac_pci_handle_npe(pci, "Received Master Abort"); + cfg01.s.rma = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } + if (cfg01.s.rta) { + edac_pci_handle_npe(pci, "Received Target Abort"); + cfg01.s.rta = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } + if (cfg01.s.sta) { + edac_pci_handle_npe(pci, "Signaled Target Abort"); + cfg01.s.sta = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } + if (cfg01.s.mdpe) { + edac_pci_handle_npe(pci, "Master Data Parity Error"); + cfg01.s.mdpe = 1; /* Reset */ + octeon_npi_write32(CVMX_NPI_PCI_CFG01, cfg01.u32); + } +} + +static int octeon_pci_probe(struct platform_device *pdev) +{ + struct edac_pci_ctl_info *pci; + int res = 0; + + pci = edac_pci_alloc_ctl_info(0, "octeon_pci_err"); + if (!pci) + return -ENOMEM; + + pci->dev = &pdev->dev; + platform_set_drvdata(pdev, pci); + pci->dev_name = dev_name(&pdev->dev); + + pci->mod_name = "octeon-pci"; + pci->ctl_name = "octeon_pci_err"; + pci->edac_check = octeon_pci_poll; + + if (edac_pci_add_device(pci, 0) > 0) { + pr_err("%s: edac_pci_add_device() failed\n", __func__); + goto err; + } + + return 0; + +err: + edac_pci_free_ctl_info(pci); + + return res; +} + +static int octeon_pci_remove(struct platform_device *pdev) +{ + struct edac_pci_ctl_info *pci = platform_get_drvdata(pdev); + + edac_pci_del_device(&pdev->dev); + edac_pci_free_ctl_info(pci); + + return 0; +} + +static struct platform_driver octeon_pci_driver = { + .probe = octeon_pci_probe, + .remove = octeon_pci_remove, + .driver = { + .name = "octeon_pci_edac", + } +}; +module_platform_driver(octeon_pci_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); diff --git a/drivers/edac/pasemi_edac.c b/drivers/edac/pasemi_edac.c new file mode 100644 index 000000000..1a1c3296c --- /dev/null +++ b/drivers/edac/pasemi_edac.c @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Author: Egor Martovetsky <egor@pasemi.com> + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Driver for the PWRficient onchip memory controllers + */ + + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define MODULE_NAME "pasemi_edac" + +#define MCCFG_MCEN 0x300 +#define MCCFG_MCEN_MMC_EN 0x00000001 +#define MCCFG_ERRCOR 0x388 +#define MCCFG_ERRCOR_RNK_FAIL_DET_EN 0x00000100 +#define MCCFG_ERRCOR_ECC_GEN_EN 0x00000010 +#define MCCFG_ERRCOR_ECC_CRR_EN 0x00000001 +#define MCCFG_SCRUB 0x384 +#define MCCFG_SCRUB_RGLR_SCRB_EN 0x00000001 +#define MCDEBUG_ERRCTL1 0x728 +#define MCDEBUG_ERRCTL1_RFL_LOG_EN 0x00080000 +#define MCDEBUG_ERRCTL1_MBE_LOG_EN 0x00040000 +#define MCDEBUG_ERRCTL1_SBE_LOG_EN 0x00020000 +#define MCDEBUG_ERRSTA 0x730 +#define MCDEBUG_ERRSTA_RFL_STATUS 0x00000004 +#define MCDEBUG_ERRSTA_MBE_STATUS 0x00000002 +#define MCDEBUG_ERRSTA_SBE_STATUS 0x00000001 +#define MCDEBUG_ERRCNT1 0x734 +#define MCDEBUG_ERRCNT1_SBE_CNT_OVRFLO 0x00000080 +#define MCDEBUG_ERRLOG1A 0x738 +#define MCDEBUG_ERRLOG1A_MERR_TYPE_M 0x30000000 +#define MCDEBUG_ERRLOG1A_MERR_TYPE_NONE 0x00000000 +#define MCDEBUG_ERRLOG1A_MERR_TYPE_SBE 0x10000000 +#define MCDEBUG_ERRLOG1A_MERR_TYPE_MBE 0x20000000 +#define MCDEBUG_ERRLOG1A_MERR_TYPE_RFL 0x30000000 +#define MCDEBUG_ERRLOG1A_MERR_BA_M 0x00700000 +#define MCDEBUG_ERRLOG1A_MERR_BA_S 20 +#define MCDEBUG_ERRLOG1A_MERR_CS_M 0x00070000 +#define MCDEBUG_ERRLOG1A_MERR_CS_S 16 +#define MCDEBUG_ERRLOG1A_SYNDROME_M 0x0000ffff +#define MCDRAM_RANKCFG 0x114 +#define MCDRAM_RANKCFG_EN 0x00000001 +#define MCDRAM_RANKCFG_TYPE_SIZE_M 0x000001c0 +#define MCDRAM_RANKCFG_TYPE_SIZE_S 6 + +#define PASEMI_EDAC_NR_CSROWS 8 +#define PASEMI_EDAC_NR_CHANS 1 +#define PASEMI_EDAC_ERROR_GRAIN 64 + +static int last_page_in_mmc; +static int system_mmc_id; + + +static u32 pasemi_edac_get_error_info(struct mem_ctl_info *mci) +{ + struct pci_dev *pdev = to_pci_dev(mci->pdev); + u32 tmp; + + pci_read_config_dword(pdev, MCDEBUG_ERRSTA, + &tmp); + + tmp &= (MCDEBUG_ERRSTA_RFL_STATUS | MCDEBUG_ERRSTA_MBE_STATUS + | MCDEBUG_ERRSTA_SBE_STATUS); + + if (tmp) { + if (tmp & MCDEBUG_ERRSTA_SBE_STATUS) + pci_write_config_dword(pdev, MCDEBUG_ERRCNT1, + MCDEBUG_ERRCNT1_SBE_CNT_OVRFLO); + pci_write_config_dword(pdev, MCDEBUG_ERRSTA, tmp); + } + + return tmp; +} + +static void pasemi_edac_process_error_info(struct mem_ctl_info *mci, u32 errsta) +{ + struct pci_dev *pdev = to_pci_dev(mci->pdev); + u32 errlog1a; + u32 cs; + + if (!errsta) + return; + + pci_read_config_dword(pdev, MCDEBUG_ERRLOG1A, &errlog1a); + + cs = (errlog1a & MCDEBUG_ERRLOG1A_MERR_CS_M) >> + MCDEBUG_ERRLOG1A_MERR_CS_S; + + /* uncorrectable/multi-bit errors */ + if (errsta & (MCDEBUG_ERRSTA_MBE_STATUS | + MCDEBUG_ERRSTA_RFL_STATUS)) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + mci->csrows[cs]->first_page, 0, 0, + cs, 0, -1, mci->ctl_name, ""); + } + + /* correctable/single-bit errors */ + if (errsta & MCDEBUG_ERRSTA_SBE_STATUS) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + mci->csrows[cs]->first_page, 0, 0, + cs, 0, -1, mci->ctl_name, ""); +} + +static void pasemi_edac_check(struct mem_ctl_info *mci) +{ + u32 errsta; + + errsta = pasemi_edac_get_error_info(mci); + if (errsta) + pasemi_edac_process_error_info(mci, errsta); +} + +static int pasemi_edac_init_csrows(struct mem_ctl_info *mci, + struct pci_dev *pdev, + enum edac_type edac_mode) +{ + struct csrow_info *csrow; + struct dimm_info *dimm; + u32 rankcfg; + int index; + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + pci_read_config_dword(pdev, + MCDRAM_RANKCFG + (index * 12), + &rankcfg); + + if (!(rankcfg & MCDRAM_RANKCFG_EN)) + continue; + + switch ((rankcfg & MCDRAM_RANKCFG_TYPE_SIZE_M) >> + MCDRAM_RANKCFG_TYPE_SIZE_S) { + case 0: + dimm->nr_pages = 128 << (20 - PAGE_SHIFT); + break; + case 1: + dimm->nr_pages = 256 << (20 - PAGE_SHIFT); + break; + case 2: + case 3: + dimm->nr_pages = 512 << (20 - PAGE_SHIFT); + break; + case 4: + dimm->nr_pages = 1024 << (20 - PAGE_SHIFT); + break; + case 5: + dimm->nr_pages = 2048 << (20 - PAGE_SHIFT); + break; + default: + edac_mc_printk(mci, KERN_ERR, + "Unrecognized Rank Config. rankcfg=%u\n", + rankcfg); + return -EINVAL; + } + + csrow->first_page = last_page_in_mmc; + csrow->last_page = csrow->first_page + dimm->nr_pages - 1; + last_page_in_mmc += dimm->nr_pages; + csrow->page_mask = 0; + dimm->grain = PASEMI_EDAC_ERROR_GRAIN; + dimm->mtype = MEM_DDR; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = edac_mode; + } + return 0; +} + +static int pasemi_edac_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + u32 errctl1, errcor, scrub, mcen; + + pci_read_config_dword(pdev, MCCFG_MCEN, &mcen); + if (!(mcen & MCCFG_MCEN_MMC_EN)) + return -ENODEV; + + /* + * We should think about enabling other error detection later on + */ + + pci_read_config_dword(pdev, MCDEBUG_ERRCTL1, &errctl1); + errctl1 |= MCDEBUG_ERRCTL1_SBE_LOG_EN | + MCDEBUG_ERRCTL1_MBE_LOG_EN | + MCDEBUG_ERRCTL1_RFL_LOG_EN; + pci_write_config_dword(pdev, MCDEBUG_ERRCTL1, errctl1); + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = PASEMI_EDAC_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = PASEMI_EDAC_NR_CHANS; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(system_mmc_id++, ARRAY_SIZE(layers), layers, + 0); + if (mci == NULL) + return -ENOMEM; + + pci_read_config_dword(pdev, MCCFG_ERRCOR, &errcor); + errcor |= MCCFG_ERRCOR_RNK_FAIL_DET_EN | + MCCFG_ERRCOR_ECC_GEN_EN | + MCCFG_ERRCOR_ECC_CRR_EN; + + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + mci->edac_cap = (errcor & MCCFG_ERRCOR_ECC_GEN_EN) ? + ((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ? + (EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_EC) : + EDAC_FLAG_NONE; + mci->mod_name = MODULE_NAME; + mci->dev_name = pci_name(pdev); + mci->ctl_name = "pasemi,pwrficient-mc"; + mci->edac_check = pasemi_edac_check; + mci->ctl_page_to_phys = NULL; + pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub); + mci->scrub_cap = SCRUB_FLAG_HW_PROG | SCRUB_FLAG_HW_SRC; + mci->scrub_mode = + ((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ? SCRUB_FLAG_HW_SRC : 0) | + ((scrub & MCCFG_SCRUB_RGLR_SCRB_EN) ? SCRUB_FLAG_HW_PROG : 0); + + if (pasemi_edac_init_csrows(mci, pdev, + (mci->edac_cap & EDAC_FLAG_SECDED) ? + EDAC_SECDED : + ((mci->edac_cap & EDAC_FLAG_EC) ? + EDAC_EC : EDAC_NONE))) + goto fail; + + /* + * Clear status + */ + pasemi_edac_get_error_info(mci); + + if (edac_mc_add_mc(mci)) + goto fail; + + /* get this far and it's successful */ + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +static void pasemi_edac_remove(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev); + + if (!mci) + return; + + edac_mc_free(mci); +} + + +static const struct pci_device_id pasemi_edac_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa00a) }, + { } +}; + +MODULE_DEVICE_TABLE(pci, pasemi_edac_pci_tbl); + +static struct pci_driver pasemi_edac_driver = { + .name = MODULE_NAME, + .probe = pasemi_edac_probe, + .remove = pasemi_edac_remove, + .id_table = pasemi_edac_pci_tbl, +}; + +static int __init pasemi_edac_init(void) +{ + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + return pci_register_driver(&pasemi_edac_driver); +} + +static void __exit pasemi_edac_exit(void) +{ + pci_unregister_driver(&pasemi_edac_driver); +} + +module_init(pasemi_edac_init); +module_exit(pasemi_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>"); +MODULE_DESCRIPTION("MC support for PA Semi PWRficient memory controller"); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + diff --git a/drivers/edac/pnd2_edac.c b/drivers/edac/pnd2_edac.c new file mode 100644 index 000000000..a20b299f1 --- /dev/null +++ b/drivers/edac/pnd2_edac.c @@ -0,0 +1,1584 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for Pondicherry2 memory controller. + * + * Copyright (c) 2016, Intel Corporation. + * + * [Derived from sb_edac.c] + * + * Translation of system physical addresses to DIMM addresses + * is a two stage process: + * + * First the Pondicherry 2 memory controller handles slice and channel interleaving + * in "sys2pmi()". This is (almost) completley common between platforms. + * + * Then a platform specific dunit (DIMM unit) completes the process to provide DIMM, + * rank, bank, row and column using the appropriate "dunit_ops" functions/parameters. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/edac.h> +#include <linux/mmzone.h> +#include <linux/smp.h> +#include <linux/bitmap.h> +#include <linux/math64.h> +#include <linux/mod_devicetable.h> +#include <linux/platform_data/x86/p2sb.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/processor.h> +#include <asm/mce.h> + +#include "edac_mc.h" +#include "edac_module.h" +#include "pnd2_edac.h" + +#define EDAC_MOD_STR "pnd2_edac" + +#define APL_NUM_CHANNELS 4 +#define DNV_NUM_CHANNELS 2 +#define DNV_MAX_DIMMS 2 /* Max DIMMs per channel */ + +enum type { + APL, + DNV, /* All requests go to PMI CH0 on each slice (CH1 disabled) */ +}; + +struct dram_addr { + int chan; + int dimm; + int rank; + int bank; + int row; + int col; +}; + +struct pnd2_pvt { + int dimm_geom[APL_NUM_CHANNELS]; + u64 tolm, tohm; +}; + +/* + * System address space is divided into multiple regions with + * different interleave rules in each. The as0/as1 regions + * have no interleaving at all. The as2 region is interleaved + * between two channels. The mot region is magic and may overlap + * other regions, with its interleave rules taking precedence. + * Addresses not in any of these regions are interleaved across + * all four channels. + */ +static struct region { + u64 base; + u64 limit; + u8 enabled; +} mot, as0, as1, as2; + +static struct dunit_ops { + char *name; + enum type type; + int pmiaddr_shift; + int pmiidx_shift; + int channels; + int dimms_per_channel; + int (*rd_reg)(int port, int off, int op, void *data, size_t sz, char *name); + int (*get_registers)(void); + int (*check_ecc)(void); + void (*mk_region)(char *name, struct region *rp, void *asym); + void (*get_dimm_config)(struct mem_ctl_info *mci); + int (*pmi2mem)(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx, + struct dram_addr *daddr, char *msg); +} *ops; + +static struct mem_ctl_info *pnd2_mci; + +#define PND2_MSG_SIZE 256 + +/* Debug macros */ +#define pnd2_printk(level, fmt, arg...) \ + edac_printk(level, "pnd2", fmt, ##arg) + +#define pnd2_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "pnd2", fmt, ##arg) + +#define MOT_CHAN_INTLV_BIT_1SLC_2CH 12 +#define MOT_CHAN_INTLV_BIT_2SLC_2CH 13 +#define SELECTOR_DISABLED (-1) +#define _4GB (1ul << 32) + +#define PMI_ADDRESS_WIDTH 31 +#define PND_MAX_PHYS_BIT 39 + +#define APL_ASYMSHIFT 28 +#define DNV_ASYMSHIFT 31 +#define CH_HASH_MASK_LSB 6 +#define SLICE_HASH_MASK_LSB 6 +#define MOT_SLC_INTLV_BIT 12 +#define LOG2_PMI_ADDR_GRANULARITY 5 +#define MOT_SHIFT 24 + +#define GET_BITFIELD(v, lo, hi) (((v) & GENMASK_ULL(hi, lo)) >> (lo)) +#define U64_LSHIFT(val, s) ((u64)(val) << (s)) + +/* + * On Apollo Lake we access memory controller registers via a + * side-band mailbox style interface in a hidden PCI device + * configuration space. + */ +static struct pci_bus *p2sb_bus; +#define P2SB_DEVFN PCI_DEVFN(0xd, 0) +#define P2SB_ADDR_OFF 0xd0 +#define P2SB_DATA_OFF 0xd4 +#define P2SB_STAT_OFF 0xd8 +#define P2SB_ROUT_OFF 0xda +#define P2SB_EADD_OFF 0xdc +#define P2SB_HIDE_OFF 0xe1 + +#define P2SB_BUSY 1 + +#define P2SB_READ(size, off, ptr) \ + pci_bus_read_config_##size(p2sb_bus, P2SB_DEVFN, off, ptr) +#define P2SB_WRITE(size, off, val) \ + pci_bus_write_config_##size(p2sb_bus, P2SB_DEVFN, off, val) + +static bool p2sb_is_busy(u16 *status) +{ + P2SB_READ(word, P2SB_STAT_OFF, status); + + return !!(*status & P2SB_BUSY); +} + +static int _apl_rd_reg(int port, int off, int op, u32 *data) +{ + int retries = 0xff, ret; + u16 status; + u8 hidden; + + /* Unhide the P2SB device, if it's hidden */ + P2SB_READ(byte, P2SB_HIDE_OFF, &hidden); + if (hidden) + P2SB_WRITE(byte, P2SB_HIDE_OFF, 0); + + if (p2sb_is_busy(&status)) { + ret = -EAGAIN; + goto out; + } + + P2SB_WRITE(dword, P2SB_ADDR_OFF, (port << 24) | off); + P2SB_WRITE(dword, P2SB_DATA_OFF, 0); + P2SB_WRITE(dword, P2SB_EADD_OFF, 0); + P2SB_WRITE(word, P2SB_ROUT_OFF, 0); + P2SB_WRITE(word, P2SB_STAT_OFF, (op << 8) | P2SB_BUSY); + + while (p2sb_is_busy(&status)) { + if (retries-- == 0) { + ret = -EBUSY; + goto out; + } + } + + P2SB_READ(dword, P2SB_DATA_OFF, data); + ret = (status >> 1) & 0x3; +out: + /* Hide the P2SB device, if it was hidden before */ + if (hidden) + P2SB_WRITE(byte, P2SB_HIDE_OFF, hidden); + + return ret; +} + +static int apl_rd_reg(int port, int off, int op, void *data, size_t sz, char *name) +{ + int ret = 0; + + edac_dbg(2, "Read %s port=%x off=%x op=%x\n", name, port, off, op); + switch (sz) { + case 8: + ret = _apl_rd_reg(port, off + 4, op, (u32 *)(data + 4)); + fallthrough; + case 4: + ret |= _apl_rd_reg(port, off, op, (u32 *)data); + pnd2_printk(KERN_DEBUG, "%s=%x%08x ret=%d\n", name, + sz == 8 ? *((u32 *)(data + 4)) : 0, *((u32 *)data), ret); + break; + } + + return ret; +} + +static u64 get_mem_ctrl_hub_base_addr(void) +{ + struct b_cr_mchbar_lo_pci lo; + struct b_cr_mchbar_hi_pci hi; + struct pci_dev *pdev; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL); + if (pdev) { + pci_read_config_dword(pdev, 0x48, (u32 *)&lo); + pci_read_config_dword(pdev, 0x4c, (u32 *)&hi); + pci_dev_put(pdev); + } else { + return 0; + } + + if (!lo.enable) { + edac_dbg(2, "MMIO via memory controller hub base address is disabled!\n"); + return 0; + } + + return U64_LSHIFT(hi.base, 32) | U64_LSHIFT(lo.base, 15); +} + +#define DNV_MCHBAR_SIZE 0x8000 +#define DNV_SB_PORT_SIZE 0x10000 +static int dnv_rd_reg(int port, int off, int op, void *data, size_t sz, char *name) +{ + struct pci_dev *pdev; + void __iomem *base; + struct resource r; + int ret; + + if (op == 4) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x1980, NULL); + if (!pdev) + return -ENODEV; + + pci_read_config_dword(pdev, off, data); + pci_dev_put(pdev); + } else { + /* MMIO via memory controller hub base address */ + if (op == 0 && port == 0x4c) { + memset(&r, 0, sizeof(r)); + + r.start = get_mem_ctrl_hub_base_addr(); + if (!r.start) + return -ENODEV; + r.end = r.start + DNV_MCHBAR_SIZE - 1; + } else { + /* MMIO via sideband register base address */ + ret = p2sb_bar(NULL, 0, &r); + if (ret) + return ret; + + r.start += (port << 16); + r.end = r.start + DNV_SB_PORT_SIZE - 1; + } + + base = ioremap(r.start, resource_size(&r)); + if (!base) + return -ENODEV; + + if (sz == 8) + *(u64 *)data = readq(base + off); + else + *(u32 *)data = readl(base + off); + + iounmap(base); + } + + edac_dbg(2, "Read %s=%.8x_%.8x\n", name, + (sz == 8) ? *(u32 *)(data + 4) : 0, *(u32 *)data); + + return 0; +} + +#define RD_REGP(regp, regname, port) \ + ops->rd_reg(port, \ + regname##_offset, \ + regname##_r_opcode, \ + regp, sizeof(struct regname), \ + #regname) + +#define RD_REG(regp, regname) \ + ops->rd_reg(regname ## _port, \ + regname##_offset, \ + regname##_r_opcode, \ + regp, sizeof(struct regname), \ + #regname) + +static u64 top_lm, top_hm; +static bool two_slices; +static bool two_channels; /* Both PMI channels in one slice enabled */ + +static u8 sym_chan_mask; +static u8 asym_chan_mask; +static u8 chan_mask; + +static int slice_selector = -1; +static int chan_selector = -1; +static u64 slice_hash_mask; +static u64 chan_hash_mask; + +static void mk_region(char *name, struct region *rp, u64 base, u64 limit) +{ + rp->enabled = 1; + rp->base = base; + rp->limit = limit; + edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, limit); +} + +static void mk_region_mask(char *name, struct region *rp, u64 base, u64 mask) +{ + if (mask == 0) { + pr_info(FW_BUG "MOT mask cannot be zero\n"); + return; + } + if (mask != GENMASK_ULL(PND_MAX_PHYS_BIT, __ffs(mask))) { + pr_info(FW_BUG "MOT mask not power of two\n"); + return; + } + if (base & ~mask) { + pr_info(FW_BUG "MOT region base/mask alignment error\n"); + return; + } + rp->base = base; + rp->limit = (base | ~mask) & GENMASK_ULL(PND_MAX_PHYS_BIT, 0); + rp->enabled = 1; + edac_dbg(2, "Region:%s [%llx, %llx]\n", name, base, rp->limit); +} + +static bool in_region(struct region *rp, u64 addr) +{ + if (!rp->enabled) + return false; + + return rp->base <= addr && addr <= rp->limit; +} + +static int gen_sym_mask(struct b_cr_slice_channel_hash *p) +{ + int mask = 0; + + if (!p->slice_0_mem_disabled) + mask |= p->sym_slice0_channel_enabled; + + if (!p->slice_1_disabled) + mask |= p->sym_slice1_channel_enabled << 2; + + if (p->ch_1_disabled || p->enable_pmi_dual_data_mode) + mask &= 0x5; + + return mask; +} + +static int gen_asym_mask(struct b_cr_slice_channel_hash *p, + struct b_cr_asym_mem_region0_mchbar *as0, + struct b_cr_asym_mem_region1_mchbar *as1, + struct b_cr_asym_2way_mem_region_mchbar *as2way) +{ + const int intlv[] = { 0x5, 0xA, 0x3, 0xC }; + int mask = 0; + + if (as2way->asym_2way_interleave_enable) + mask = intlv[as2way->asym_2way_intlv_mode]; + if (as0->slice0_asym_enable) + mask |= (1 << as0->slice0_asym_channel_select); + if (as1->slice1_asym_enable) + mask |= (4 << as1->slice1_asym_channel_select); + if (p->slice_0_mem_disabled) + mask &= 0xc; + if (p->slice_1_disabled) + mask &= 0x3; + if (p->ch_1_disabled || p->enable_pmi_dual_data_mode) + mask &= 0x5; + + return mask; +} + +static struct b_cr_tolud_pci tolud; +static struct b_cr_touud_lo_pci touud_lo; +static struct b_cr_touud_hi_pci touud_hi; +static struct b_cr_asym_mem_region0_mchbar asym0; +static struct b_cr_asym_mem_region1_mchbar asym1; +static struct b_cr_asym_2way_mem_region_mchbar asym_2way; +static struct b_cr_mot_out_base_mchbar mot_base; +static struct b_cr_mot_out_mask_mchbar mot_mask; +static struct b_cr_slice_channel_hash chash; + +/* Apollo Lake dunit */ +/* + * Validated on board with just two DIMMs in the [0] and [2] positions + * in this array. Other port number matches documentation, but caution + * advised. + */ +static const int apl_dports[APL_NUM_CHANNELS] = { 0x18, 0x10, 0x11, 0x19 }; +static struct d_cr_drp0 drp0[APL_NUM_CHANNELS]; + +/* Denverton dunit */ +static const int dnv_dports[DNV_NUM_CHANNELS] = { 0x10, 0x12 }; +static struct d_cr_dsch dsch; +static struct d_cr_ecc_ctrl ecc_ctrl[DNV_NUM_CHANNELS]; +static struct d_cr_drp drp[DNV_NUM_CHANNELS]; +static struct d_cr_dmap dmap[DNV_NUM_CHANNELS]; +static struct d_cr_dmap1 dmap1[DNV_NUM_CHANNELS]; +static struct d_cr_dmap2 dmap2[DNV_NUM_CHANNELS]; +static struct d_cr_dmap3 dmap3[DNV_NUM_CHANNELS]; +static struct d_cr_dmap4 dmap4[DNV_NUM_CHANNELS]; +static struct d_cr_dmap5 dmap5[DNV_NUM_CHANNELS]; + +static void apl_mk_region(char *name, struct region *rp, void *asym) +{ + struct b_cr_asym_mem_region0_mchbar *a = asym; + + mk_region(name, rp, + U64_LSHIFT(a->slice0_asym_base, APL_ASYMSHIFT), + U64_LSHIFT(a->slice0_asym_limit, APL_ASYMSHIFT) + + GENMASK_ULL(APL_ASYMSHIFT - 1, 0)); +} + +static void dnv_mk_region(char *name, struct region *rp, void *asym) +{ + struct b_cr_asym_mem_region_denverton *a = asym; + + mk_region(name, rp, + U64_LSHIFT(a->slice_asym_base, DNV_ASYMSHIFT), + U64_LSHIFT(a->slice_asym_limit, DNV_ASYMSHIFT) + + GENMASK_ULL(DNV_ASYMSHIFT - 1, 0)); +} + +static int apl_get_registers(void) +{ + int ret = -ENODEV; + int i; + + if (RD_REG(&asym_2way, b_cr_asym_2way_mem_region_mchbar)) + return -ENODEV; + + /* + * RD_REGP() will fail for unpopulated or non-existent + * DIMM slots. Return success if we find at least one DIMM. + */ + for (i = 0; i < APL_NUM_CHANNELS; i++) + if (!RD_REGP(&drp0[i], d_cr_drp0, apl_dports[i])) + ret = 0; + + return ret; +} + +static int dnv_get_registers(void) +{ + int i; + + if (RD_REG(&dsch, d_cr_dsch)) + return -ENODEV; + + for (i = 0; i < DNV_NUM_CHANNELS; i++) + if (RD_REGP(&ecc_ctrl[i], d_cr_ecc_ctrl, dnv_dports[i]) || + RD_REGP(&drp[i], d_cr_drp, dnv_dports[i]) || + RD_REGP(&dmap[i], d_cr_dmap, dnv_dports[i]) || + RD_REGP(&dmap1[i], d_cr_dmap1, dnv_dports[i]) || + RD_REGP(&dmap2[i], d_cr_dmap2, dnv_dports[i]) || + RD_REGP(&dmap3[i], d_cr_dmap3, dnv_dports[i]) || + RD_REGP(&dmap4[i], d_cr_dmap4, dnv_dports[i]) || + RD_REGP(&dmap5[i], d_cr_dmap5, dnv_dports[i])) + return -ENODEV; + + return 0; +} + +/* + * Read all the h/w config registers once here (they don't + * change at run time. Figure out which address ranges have + * which interleave characteristics. + */ +static int get_registers(void) +{ + const int intlv[] = { 10, 11, 12, 12 }; + + if (RD_REG(&tolud, b_cr_tolud_pci) || + RD_REG(&touud_lo, b_cr_touud_lo_pci) || + RD_REG(&touud_hi, b_cr_touud_hi_pci) || + RD_REG(&asym0, b_cr_asym_mem_region0_mchbar) || + RD_REG(&asym1, b_cr_asym_mem_region1_mchbar) || + RD_REG(&mot_base, b_cr_mot_out_base_mchbar) || + RD_REG(&mot_mask, b_cr_mot_out_mask_mchbar) || + RD_REG(&chash, b_cr_slice_channel_hash)) + return -ENODEV; + + if (ops->get_registers()) + return -ENODEV; + + if (ops->type == DNV) { + /* PMI channel idx (always 0) for asymmetric region */ + asym0.slice0_asym_channel_select = 0; + asym1.slice1_asym_channel_select = 0; + /* PMI channel bitmap (always 1) for symmetric region */ + chash.sym_slice0_channel_enabled = 0x1; + chash.sym_slice1_channel_enabled = 0x1; + } + + if (asym0.slice0_asym_enable) + ops->mk_region("as0", &as0, &asym0); + + if (asym1.slice1_asym_enable) + ops->mk_region("as1", &as1, &asym1); + + if (asym_2way.asym_2way_interleave_enable) { + mk_region("as2way", &as2, + U64_LSHIFT(asym_2way.asym_2way_base, APL_ASYMSHIFT), + U64_LSHIFT(asym_2way.asym_2way_limit, APL_ASYMSHIFT) + + GENMASK_ULL(APL_ASYMSHIFT - 1, 0)); + } + + if (mot_base.imr_en) { + mk_region_mask("mot", &mot, + U64_LSHIFT(mot_base.mot_out_base, MOT_SHIFT), + U64_LSHIFT(mot_mask.mot_out_mask, MOT_SHIFT)); + } + + top_lm = U64_LSHIFT(tolud.tolud, 20); + top_hm = U64_LSHIFT(touud_hi.touud, 32) | U64_LSHIFT(touud_lo.touud, 20); + + two_slices = !chash.slice_1_disabled && + !chash.slice_0_mem_disabled && + (chash.sym_slice0_channel_enabled != 0) && + (chash.sym_slice1_channel_enabled != 0); + two_channels = !chash.ch_1_disabled && + !chash.enable_pmi_dual_data_mode && + ((chash.sym_slice0_channel_enabled == 3) || + (chash.sym_slice1_channel_enabled == 3)); + + sym_chan_mask = gen_sym_mask(&chash); + asym_chan_mask = gen_asym_mask(&chash, &asym0, &asym1, &asym_2way); + chan_mask = sym_chan_mask | asym_chan_mask; + + if (two_slices && !two_channels) { + if (chash.hvm_mode) + slice_selector = 29; + else + slice_selector = intlv[chash.interleave_mode]; + } else if (!two_slices && two_channels) { + if (chash.hvm_mode) + chan_selector = 29; + else + chan_selector = intlv[chash.interleave_mode]; + } else if (two_slices && two_channels) { + if (chash.hvm_mode) { + slice_selector = 29; + chan_selector = 30; + } else { + slice_selector = intlv[chash.interleave_mode]; + chan_selector = intlv[chash.interleave_mode] + 1; + } + } + + if (two_slices) { + if (!chash.hvm_mode) + slice_hash_mask = chash.slice_hash_mask << SLICE_HASH_MASK_LSB; + if (!two_channels) + slice_hash_mask |= BIT_ULL(slice_selector); + } + + if (two_channels) { + if (!chash.hvm_mode) + chan_hash_mask = chash.ch_hash_mask << CH_HASH_MASK_LSB; + if (!two_slices) + chan_hash_mask |= BIT_ULL(chan_selector); + } + + return 0; +} + +/* Get a contiguous memory address (remove the MMIO gap) */ +static u64 remove_mmio_gap(u64 sys) +{ + return (sys < _4GB) ? sys : sys - (_4GB - top_lm); +} + +/* Squeeze out one address bit, shift upper part down to fill gap */ +static void remove_addr_bit(u64 *addr, int bitidx) +{ + u64 mask; + + if (bitidx == -1) + return; + + mask = (1ull << bitidx) - 1; + *addr = ((*addr >> 1) & ~mask) | (*addr & mask); +} + +/* XOR all the bits from addr specified in mask */ +static int hash_by_mask(u64 addr, u64 mask) +{ + u64 result = addr & mask; + + result = (result >> 32) ^ result; + result = (result >> 16) ^ result; + result = (result >> 8) ^ result; + result = (result >> 4) ^ result; + result = (result >> 2) ^ result; + result = (result >> 1) ^ result; + + return (int)result & 1; +} + +/* + * First stage decode. Take the system address and figure out which + * second stage will deal with it based on interleave modes. + */ +static int sys2pmi(const u64 addr, u32 *pmiidx, u64 *pmiaddr, char *msg) +{ + u64 contig_addr, contig_base, contig_offset, contig_base_adj; + int mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH : + MOT_CHAN_INTLV_BIT_1SLC_2CH; + int slice_intlv_bit_rm = SELECTOR_DISABLED; + int chan_intlv_bit_rm = SELECTOR_DISABLED; + /* Determine if address is in the MOT region. */ + bool mot_hit = in_region(&mot, addr); + /* Calculate the number of symmetric regions enabled. */ + int sym_channels = hweight8(sym_chan_mask); + + /* + * The amount we need to shift the asym base can be determined by the + * number of enabled symmetric channels. + * NOTE: This can only work because symmetric memory is not supposed + * to do a 3-way interleave. + */ + int sym_chan_shift = sym_channels >> 1; + + /* Give up if address is out of range, or in MMIO gap */ + if (addr >= (1ul << PND_MAX_PHYS_BIT) || + (addr >= top_lm && addr < _4GB) || addr >= top_hm) { + snprintf(msg, PND2_MSG_SIZE, "Error address 0x%llx is not DRAM", addr); + return -EINVAL; + } + + /* Get a contiguous memory address (remove the MMIO gap) */ + contig_addr = remove_mmio_gap(addr); + + if (in_region(&as0, addr)) { + *pmiidx = asym0.slice0_asym_channel_select; + + contig_base = remove_mmio_gap(as0.base); + contig_offset = contig_addr - contig_base; + contig_base_adj = (contig_base >> sym_chan_shift) * + ((chash.sym_slice0_channel_enabled >> (*pmiidx & 1)) & 1); + contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull); + } else if (in_region(&as1, addr)) { + *pmiidx = 2u + asym1.slice1_asym_channel_select; + + contig_base = remove_mmio_gap(as1.base); + contig_offset = contig_addr - contig_base; + contig_base_adj = (contig_base >> sym_chan_shift) * + ((chash.sym_slice1_channel_enabled >> (*pmiidx & 1)) & 1); + contig_addr = contig_offset + ((sym_channels > 0) ? contig_base_adj : 0ull); + } else if (in_region(&as2, addr) && (asym_2way.asym_2way_intlv_mode == 0x3ul)) { + bool channel1; + + mot_intlv_bit = MOT_CHAN_INTLV_BIT_1SLC_2CH; + *pmiidx = (asym_2way.asym_2way_intlv_mode & 1) << 1; + channel1 = mot_hit ? ((bool)((addr >> mot_intlv_bit) & 1)) : + hash_by_mask(contig_addr, chan_hash_mask); + *pmiidx |= (u32)channel1; + + contig_base = remove_mmio_gap(as2.base); + chan_intlv_bit_rm = mot_hit ? mot_intlv_bit : chan_selector; + contig_offset = contig_addr - contig_base; + remove_addr_bit(&contig_offset, chan_intlv_bit_rm); + contig_addr = (contig_base >> sym_chan_shift) + contig_offset; + } else { + /* Otherwise we're in normal, boring symmetric mode. */ + *pmiidx = 0u; + + if (two_slices) { + bool slice1; + + if (mot_hit) { + slice_intlv_bit_rm = MOT_SLC_INTLV_BIT; + slice1 = (addr >> MOT_SLC_INTLV_BIT) & 1; + } else { + slice_intlv_bit_rm = slice_selector; + slice1 = hash_by_mask(addr, slice_hash_mask); + } + + *pmiidx = (u32)slice1 << 1; + } + + if (two_channels) { + bool channel1; + + mot_intlv_bit = two_slices ? MOT_CHAN_INTLV_BIT_2SLC_2CH : + MOT_CHAN_INTLV_BIT_1SLC_2CH; + + if (mot_hit) { + chan_intlv_bit_rm = mot_intlv_bit; + channel1 = (addr >> mot_intlv_bit) & 1; + } else { + chan_intlv_bit_rm = chan_selector; + channel1 = hash_by_mask(contig_addr, chan_hash_mask); + } + + *pmiidx |= (u32)channel1; + } + } + + /* Remove the chan_selector bit first */ + remove_addr_bit(&contig_addr, chan_intlv_bit_rm); + /* Remove the slice bit (we remove it second because it must be lower */ + remove_addr_bit(&contig_addr, slice_intlv_bit_rm); + *pmiaddr = contig_addr; + + return 0; +} + +/* Translate PMI address to memory (rank, row, bank, column) */ +#define C(n) (0x10 | (n)) /* column */ +#define B(n) (0x20 | (n)) /* bank */ +#define R(n) (0x40 | (n)) /* row */ +#define RS (0x80) /* rank */ + +/* addrdec values */ +#define AMAP_1KB 0 +#define AMAP_2KB 1 +#define AMAP_4KB 2 +#define AMAP_RSVD 3 + +/* dden values */ +#define DEN_4Gb 0 +#define DEN_8Gb 2 + +/* dwid values */ +#define X8 0 +#define X16 1 + +static struct dimm_geometry { + u8 addrdec; + u8 dden; + u8 dwid; + u8 rowbits, colbits; + u16 bits[PMI_ADDRESS_WIDTH]; +} dimms[] = { + { + .addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X16, + .rowbits = 15, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), B(0), B(1), B(2), R(0), + R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), R(9), + R(10), C(7), C(8), C(9), R(11), RS, R(12), R(13), R(14), + 0, 0, 0, 0 + } + }, + { + .addrdec = AMAP_1KB, .dden = DEN_4Gb, .dwid = X8, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), B(0), B(1), B(2), R(0), + R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), R(9), + R(10), C(7), C(8), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X16, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), B(0), B(1), B(2), R(0), + R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), R(9), + R(10), C(7), C(8), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_1KB, .dden = DEN_8Gb, .dwid = X8, + .rowbits = 16, .colbits = 11, + .bits = { + C(2), C(3), C(4), C(5), C(6), B(0), B(1), B(2), R(0), + R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), R(9), + R(10), C(7), C(8), C(9), R(11), RS, C(11), R(12), R(13), + R(14), R(15), 0, 0 + } + }, + { + .addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X16, + .rowbits = 15, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), B(0), B(1), B(2), + R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), + R(9), R(10), C(8), C(9), R(11), RS, R(12), R(13), R(14), + 0, 0, 0, 0 + } + }, + { + .addrdec = AMAP_2KB, .dden = DEN_4Gb, .dwid = X8, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), B(0), B(1), B(2), + R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), + R(9), R(10), C(8), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X16, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), B(0), B(1), B(2), + R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), + R(9), R(10), C(8), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_2KB, .dden = DEN_8Gb, .dwid = X8, + .rowbits = 16, .colbits = 11, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), B(0), B(1), B(2), + R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), R(8), + R(9), R(10), C(8), C(9), R(11), RS, C(11), R(12), R(13), + R(14), R(15), 0, 0 + } + }, + { + .addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X16, + .rowbits = 15, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), C(8), B(0), B(1), + B(2), R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), + R(8), R(9), R(10), C(9), R(11), RS, R(12), R(13), R(14), + 0, 0, 0, 0 + } + }, + { + .addrdec = AMAP_4KB, .dden = DEN_4Gb, .dwid = X8, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), C(8), B(0), B(1), + B(2), R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), + R(8), R(9), R(10), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X16, + .rowbits = 16, .colbits = 10, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), C(8), B(0), B(1), + B(2), R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), + R(8), R(9), R(10), C(9), R(11), RS, R(12), R(13), R(14), + R(15), 0, 0, 0 + } + }, + { + .addrdec = AMAP_4KB, .dden = DEN_8Gb, .dwid = X8, + .rowbits = 16, .colbits = 11, + .bits = { + C(2), C(3), C(4), C(5), C(6), C(7), C(8), B(0), B(1), + B(2), R(0), R(1), R(2), R(3), R(4), R(5), R(6), R(7), + R(8), R(9), R(10), C(9), R(11), RS, C(11), R(12), R(13), + R(14), R(15), 0, 0 + } + } +}; + +static int bank_hash(u64 pmiaddr, int idx, int shft) +{ + int bhash = 0; + + switch (idx) { + case 0: + bhash ^= ((pmiaddr >> (12 + shft)) ^ (pmiaddr >> (9 + shft))) & 1; + break; + case 1: + bhash ^= (((pmiaddr >> (10 + shft)) ^ (pmiaddr >> (8 + shft))) & 1) << 1; + bhash ^= ((pmiaddr >> 22) & 1) << 1; + break; + case 2: + bhash ^= (((pmiaddr >> (13 + shft)) ^ (pmiaddr >> (11 + shft))) & 1) << 2; + break; + } + + return bhash; +} + +static int rank_hash(u64 pmiaddr) +{ + return ((pmiaddr >> 16) ^ (pmiaddr >> 10)) & 1; +} + +/* Second stage decode. Compute rank, bank, row & column. */ +static int apl_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx, + struct dram_addr *daddr, char *msg) +{ + struct d_cr_drp0 *cr_drp0 = &drp0[pmiidx]; + struct pnd2_pvt *pvt = mci->pvt_info; + int g = pvt->dimm_geom[pmiidx]; + struct dimm_geometry *d = &dimms[g]; + int column = 0, bank = 0, row = 0, rank = 0; + int i, idx, type, skiprs = 0; + + for (i = 0; i < PMI_ADDRESS_WIDTH; i++) { + int bit = (pmiaddr >> i) & 1; + + if (i + skiprs >= PMI_ADDRESS_WIDTH) { + snprintf(msg, PND2_MSG_SIZE, "Bad dimm_geometry[] table\n"); + return -EINVAL; + } + + type = d->bits[i + skiprs] & ~0xf; + idx = d->bits[i + skiprs] & 0xf; + + /* + * On single rank DIMMs ignore the rank select bit + * and shift remainder of "bits[]" down one place. + */ + if (type == RS && (cr_drp0->rken0 + cr_drp0->rken1) == 1) { + skiprs = 1; + type = d->bits[i + skiprs] & ~0xf; + idx = d->bits[i + skiprs] & 0xf; + } + + switch (type) { + case C(0): + column |= (bit << idx); + break; + case B(0): + bank |= (bit << idx); + if (cr_drp0->bahen) + bank ^= bank_hash(pmiaddr, idx, d->addrdec); + break; + case R(0): + row |= (bit << idx); + break; + case RS: + rank = bit; + if (cr_drp0->rsien) + rank ^= rank_hash(pmiaddr); + break; + default: + if (bit) { + snprintf(msg, PND2_MSG_SIZE, "Bad translation\n"); + return -EINVAL; + } + goto done; + } + } + +done: + daddr->col = column; + daddr->bank = bank; + daddr->row = row; + daddr->rank = rank; + daddr->dimm = 0; + + return 0; +} + +/* Pluck bit "in" from pmiaddr and return value shifted to bit "out" */ +#define dnv_get_bit(pmi, in, out) ((int)(((pmi) >> (in)) & 1u) << (out)) + +static int dnv_pmi2mem(struct mem_ctl_info *mci, u64 pmiaddr, u32 pmiidx, + struct dram_addr *daddr, char *msg) +{ + /* Rank 0 or 1 */ + daddr->rank = dnv_get_bit(pmiaddr, dmap[pmiidx].rs0 + 13, 0); + /* Rank 2 or 3 */ + daddr->rank |= dnv_get_bit(pmiaddr, dmap[pmiidx].rs1 + 13, 1); + + /* + * Normally ranks 0,1 are DIMM0, and 2,3 are DIMM1, but we + * flip them if DIMM1 is larger than DIMM0. + */ + daddr->dimm = (daddr->rank >= 2) ^ drp[pmiidx].dimmflip; + + daddr->bank = dnv_get_bit(pmiaddr, dmap[pmiidx].ba0 + 6, 0); + daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].ba1 + 6, 1); + daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg0 + 6, 2); + if (dsch.ddr4en) + daddr->bank |= dnv_get_bit(pmiaddr, dmap[pmiidx].bg1 + 6, 3); + if (dmap1[pmiidx].bxor) { + if (dsch.ddr4en) { + daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 0); + daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 1); + if (dsch.chan_width == 0) + /* 64/72 bit dram channel width */ + daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2); + else + /* 32/40 bit dram channel width */ + daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2); + daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 3); + } else { + daddr->bank ^= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 0); + daddr->bank ^= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 1); + if (dsch.chan_width == 0) + daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 2); + else + daddr->bank ^= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 2); + } + } + + daddr->row = dnv_get_bit(pmiaddr, dmap2[pmiidx].row0 + 6, 0); + daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row1 + 6, 1); + daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row2 + 6, 2); + daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row3 + 6, 3); + daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row4 + 6, 4); + daddr->row |= dnv_get_bit(pmiaddr, dmap2[pmiidx].row5 + 6, 5); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row6 + 6, 6); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row7 + 6, 7); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row8 + 6, 8); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row9 + 6, 9); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row10 + 6, 10); + daddr->row |= dnv_get_bit(pmiaddr, dmap3[pmiidx].row11 + 6, 11); + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row12 + 6, 12); + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row13 + 6, 13); + if (dmap4[pmiidx].row14 != 31) + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row14 + 6, 14); + if (dmap4[pmiidx].row15 != 31) + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row15 + 6, 15); + if (dmap4[pmiidx].row16 != 31) + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row16 + 6, 16); + if (dmap4[pmiidx].row17 != 31) + daddr->row |= dnv_get_bit(pmiaddr, dmap4[pmiidx].row17 + 6, 17); + + daddr->col = dnv_get_bit(pmiaddr, dmap5[pmiidx].ca3 + 6, 3); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca4 + 6, 4); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca5 + 6, 5); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca6 + 6, 6); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca7 + 6, 7); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca8 + 6, 8); + daddr->col |= dnv_get_bit(pmiaddr, dmap5[pmiidx].ca9 + 6, 9); + if (!dsch.ddr4en && dmap1[pmiidx].ca11 != 0x3f) + daddr->col |= dnv_get_bit(pmiaddr, dmap1[pmiidx].ca11 + 13, 11); + + return 0; +} + +static int check_channel(int ch) +{ + if (drp0[ch].dramtype != 0) { + pnd2_printk(KERN_INFO, "Unsupported DIMM in channel %d\n", ch); + return 1; + } else if (drp0[ch].eccen == 0) { + pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch); + return 1; + } + return 0; +} + +static int apl_check_ecc_active(void) +{ + int i, ret = 0; + + /* Check dramtype and ECC mode for each present DIMM */ + for (i = 0; i < APL_NUM_CHANNELS; i++) + if (chan_mask & BIT(i)) + ret += check_channel(i); + return ret ? -EINVAL : 0; +} + +#define DIMMS_PRESENT(d) ((d)->rken0 + (d)->rken1 + (d)->rken2 + (d)->rken3) + +static int check_unit(int ch) +{ + struct d_cr_drp *d = &drp[ch]; + + if (DIMMS_PRESENT(d) && !ecc_ctrl[ch].eccen) { + pnd2_printk(KERN_INFO, "ECC disabled on channel %d\n", ch); + return 1; + } + return 0; +} + +static int dnv_check_ecc_active(void) +{ + int i, ret = 0; + + for (i = 0; i < DNV_NUM_CHANNELS; i++) + ret += check_unit(i); + return ret ? -EINVAL : 0; +} + +static int get_memory_error_data(struct mem_ctl_info *mci, u64 addr, + struct dram_addr *daddr, char *msg) +{ + u64 pmiaddr; + u32 pmiidx; + int ret; + + ret = sys2pmi(addr, &pmiidx, &pmiaddr, msg); + if (ret) + return ret; + + pmiaddr >>= ops->pmiaddr_shift; + /* pmi channel idx to dimm channel idx */ + pmiidx >>= ops->pmiidx_shift; + daddr->chan = pmiidx; + + ret = ops->pmi2mem(mci, pmiaddr, pmiidx, daddr, msg); + if (ret) + return ret; + + edac_dbg(0, "SysAddr=%llx PmiAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n", + addr, pmiaddr, daddr->chan, daddr->dimm, daddr->rank, daddr->bank, daddr->row, daddr->col); + + return 0; +} + +static void pnd2_mce_output_error(struct mem_ctl_info *mci, const struct mce *m, + struct dram_addr *daddr) +{ + enum hw_event_mc_err_type tp_event; + char *optype, msg[PND2_MSG_SIZE]; + bool ripv = m->mcgstatus & MCG_STATUS_RIPV; + bool overflow = m->status & MCI_STATUS_OVER; + bool uc_err = m->status & MCI_STATUS_UC; + bool recov = m->status & MCI_STATUS_S; + u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); + u32 mscod = GET_BITFIELD(m->status, 16, 31); + u32 errcode = GET_BITFIELD(m->status, 0, 15); + u32 optypenum = GET_BITFIELD(m->status, 4, 6); + int rc; + + tp_event = uc_err ? (ripv ? HW_EVENT_ERR_UNCORRECTED : HW_EVENT_ERR_FATAL) : + HW_EVENT_ERR_CORRECTED; + + /* + * According with Table 15-9 of the Intel Architecture spec vol 3A, + * memory errors should fit in this mask: + * 000f 0000 1mmm cccc (binary) + * where: + * f = Correction Report Filtering Bit. If 1, subsequent errors + * won't be shown + * mmm = error type + * cccc = channel + * If the mask doesn't match, report an error to the parsing logic + */ + if (!((errcode & 0xef80) == 0x80)) { + optype = "Can't parse: it is not a mem"; + } else { + switch (optypenum) { + case 0: + optype = "generic undef request error"; + break; + case 1: + optype = "memory read error"; + break; + case 2: + optype = "memory write error"; + break; + case 3: + optype = "addr/cmd error"; + break; + case 4: + optype = "memory scrubbing error"; + break; + default: + optype = "reserved"; + break; + } + } + + /* Only decode errors with an valid address (ADDRV) */ + if (!(m->status & MCI_STATUS_ADDRV)) + return; + + rc = get_memory_error_data(mci, m->addr, daddr, msg); + if (rc) + goto address_error; + + snprintf(msg, sizeof(msg), + "%s%s err_code:%04x:%04x channel:%d DIMM:%d rank:%d row:%d bank:%d col:%d", + overflow ? " OVERFLOW" : "", (uc_err && recov) ? " recoverable" : "", mscod, + errcode, daddr->chan, daddr->dimm, daddr->rank, daddr->row, daddr->bank, daddr->col); + + edac_dbg(0, "%s\n", msg); + + /* Call the helper to output message */ + edac_mc_handle_error(tp_event, mci, core_err_cnt, m->addr >> PAGE_SHIFT, + m->addr & ~PAGE_MASK, 0, daddr->chan, daddr->dimm, -1, optype, msg); + + return; + +address_error: + edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0, -1, -1, -1, msg, ""); +} + +static void apl_get_dimm_config(struct mem_ctl_info *mci) +{ + struct pnd2_pvt *pvt = mci->pvt_info; + struct dimm_info *dimm; + struct d_cr_drp0 *d; + u64 capacity; + int i, g; + + for (i = 0; i < APL_NUM_CHANNELS; i++) { + if (!(chan_mask & BIT(i))) + continue; + + dimm = edac_get_dimm(mci, i, 0, 0); + if (!dimm) { + edac_dbg(0, "No allocated DIMM for channel %d\n", i); + continue; + } + + d = &drp0[i]; + for (g = 0; g < ARRAY_SIZE(dimms); g++) + if (dimms[g].addrdec == d->addrdec && + dimms[g].dden == d->dden && + dimms[g].dwid == d->dwid) + break; + + if (g == ARRAY_SIZE(dimms)) { + edac_dbg(0, "Channel %d: unrecognized DIMM\n", i); + continue; + } + + pvt->dimm_geom[i] = g; + capacity = (d->rken0 + d->rken1) * 8 * (1ul << dimms[g].rowbits) * + (1ul << dimms[g].colbits); + edac_dbg(0, "Channel %d: %lld MByte DIMM\n", i, capacity >> (20 - 3)); + dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3)); + dimm->grain = 32; + dimm->dtype = (d->dwid == 0) ? DEV_X8 : DEV_X16; + dimm->mtype = MEM_DDR3; + dimm->edac_mode = EDAC_SECDED; + snprintf(dimm->label, sizeof(dimm->label), "Slice#%d_Chan#%d", i / 2, i % 2); + } +} + +static const int dnv_dtypes[] = { + DEV_X8, DEV_X4, DEV_X16, DEV_UNKNOWN +}; + +static void dnv_get_dimm_config(struct mem_ctl_info *mci) +{ + int i, j, ranks_of_dimm[DNV_MAX_DIMMS], banks, rowbits, colbits, memtype; + struct dimm_info *dimm; + struct d_cr_drp *d; + u64 capacity; + + if (dsch.ddr4en) { + memtype = MEM_DDR4; + banks = 16; + colbits = 10; + } else { + memtype = MEM_DDR3; + banks = 8; + } + + for (i = 0; i < DNV_NUM_CHANNELS; i++) { + if (dmap4[i].row14 == 31) + rowbits = 14; + else if (dmap4[i].row15 == 31) + rowbits = 15; + else if (dmap4[i].row16 == 31) + rowbits = 16; + else if (dmap4[i].row17 == 31) + rowbits = 17; + else + rowbits = 18; + + if (memtype == MEM_DDR3) { + if (dmap1[i].ca11 != 0x3f) + colbits = 12; + else + colbits = 10; + } + + d = &drp[i]; + /* DIMM0 is present if rank0 and/or rank1 is enabled */ + ranks_of_dimm[0] = d->rken0 + d->rken1; + /* DIMM1 is present if rank2 and/or rank3 is enabled */ + ranks_of_dimm[1] = d->rken2 + d->rken3; + + for (j = 0; j < DNV_MAX_DIMMS; j++) { + if (!ranks_of_dimm[j]) + continue; + + dimm = edac_get_dimm(mci, i, j, 0); + if (!dimm) { + edac_dbg(0, "No allocated DIMM for channel %d DIMM %d\n", i, j); + continue; + } + + capacity = ranks_of_dimm[j] * banks * (1ul << rowbits) * (1ul << colbits); + edac_dbg(0, "Channel %d DIMM %d: %lld MByte DIMM\n", i, j, capacity >> (20 - 3)); + dimm->nr_pages = MiB_TO_PAGES(capacity >> (20 - 3)); + dimm->grain = 32; + dimm->dtype = dnv_dtypes[j ? d->dimmdwid0 : d->dimmdwid1]; + dimm->mtype = memtype; + dimm->edac_mode = EDAC_SECDED; + snprintf(dimm->label, sizeof(dimm->label), "Chan#%d_DIMM#%d", i, j); + } + } +} + +static int pnd2_register_mci(struct mem_ctl_info **ppmci) +{ + struct edac_mc_layer layers[2]; + struct mem_ctl_info *mci; + struct pnd2_pvt *pvt; + int rc; + + rc = ops->check_ecc(); + if (rc < 0) + return rc; + + /* Allocate a new MC control structure */ + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = ops->channels; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = ops->dimms_per_channel; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (!mci) + return -ENOMEM; + + pvt = mci->pvt_info; + memset(pvt, 0, sizeof(*pvt)); + + mci->mod_name = EDAC_MOD_STR; + mci->dev_name = ops->name; + mci->ctl_name = "Pondicherry2"; + + /* Get dimm basic config and the memory layout */ + ops->get_dimm_config(mci); + + if (edac_mc_add_mc(mci)) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + edac_mc_free(mci); + return -EINVAL; + } + + *ppmci = mci; + + return 0; +} + +static void pnd2_unregister_mci(struct mem_ctl_info *mci) +{ + if (unlikely(!mci || !mci->pvt_info)) { + pnd2_printk(KERN_ERR, "Couldn't find mci handler\n"); + return; + } + + /* Remove MC sysfs nodes */ + edac_mc_del_mc(NULL); + edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); + edac_mc_free(mci); +} + +/* + * Callback function registered with core kernel mce code. + * Called once for each logged error. + */ +static int pnd2_mce_check_error(struct notifier_block *nb, unsigned long val, void *data) +{ + struct mce *mce = (struct mce *)data; + struct mem_ctl_info *mci; + struct dram_addr daddr; + char *type; + + mci = pnd2_mci; + if (!mci || (mce->kflags & MCE_HANDLED_CEC)) + return NOTIFY_DONE; + + /* + * Just let mcelog handle it if the error is + * outside the memory controller. A memory error + * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0. + * bit 12 has an special meaning. + */ + if ((mce->status & 0xefff) >> 7 != 1) + return NOTIFY_DONE; + + if (mce->mcgstatus & MCG_STATUS_MCIP) + type = "Exception"; + else + type = "Event"; + + pnd2_mc_printk(mci, KERN_INFO, "HANDLING MCE MEMORY ERROR\n"); + pnd2_mc_printk(mci, KERN_INFO, "CPU %u: Machine Check %s: %llx Bank %u: %llx\n", + mce->extcpu, type, mce->mcgstatus, mce->bank, mce->status); + pnd2_mc_printk(mci, KERN_INFO, "TSC %llx ", mce->tsc); + pnd2_mc_printk(mci, KERN_INFO, "ADDR %llx ", mce->addr); + pnd2_mc_printk(mci, KERN_INFO, "MISC %llx ", mce->misc); + pnd2_mc_printk(mci, KERN_INFO, "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n", + mce->cpuvendor, mce->cpuid, mce->time, mce->socketid, mce->apicid); + + pnd2_mce_output_error(mci, mce, &daddr); + + /* Advice mcelog that the error were handled */ + mce->kflags |= MCE_HANDLED_EDAC; + return NOTIFY_OK; +} + +static struct notifier_block pnd2_mce_dec = { + .notifier_call = pnd2_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +#ifdef CONFIG_EDAC_DEBUG +/* + * Write an address to this file to exercise the address decode + * logic in this driver. + */ +static u64 pnd2_fake_addr; +#define PND2_BLOB_SIZE 1024 +static char pnd2_result[PND2_BLOB_SIZE]; +static struct dentry *pnd2_test; +static struct debugfs_blob_wrapper pnd2_blob = { + .data = pnd2_result, + .size = 0 +}; + +static int debugfs_u64_set(void *data, u64 val) +{ + struct dram_addr daddr; + struct mce m; + + *(u64 *)data = val; + m.mcgstatus = 0; + /* ADDRV + MemRd + Unknown channel */ + m.status = MCI_STATUS_ADDRV + 0x9f; + m.addr = val; + pnd2_mce_output_error(pnd2_mci, &m, &daddr); + snprintf(pnd2_blob.data, PND2_BLOB_SIZE, + "SysAddr=%llx Channel=%d DIMM=%d Rank=%d Bank=%d Row=%d Column=%d\n", + m.addr, daddr.chan, daddr.dimm, daddr.rank, daddr.bank, daddr.row, daddr.col); + pnd2_blob.size = strlen(pnd2_blob.data); + + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); + +static void setup_pnd2_debug(void) +{ + pnd2_test = edac_debugfs_create_dir("pnd2_test"); + edac_debugfs_create_file("pnd2_debug_addr", 0200, pnd2_test, + &pnd2_fake_addr, &fops_u64_wo); + debugfs_create_blob("pnd2_debug_results", 0400, pnd2_test, &pnd2_blob); +} + +static void teardown_pnd2_debug(void) +{ + debugfs_remove_recursive(pnd2_test); +} +#else +static void setup_pnd2_debug(void) {} +static void teardown_pnd2_debug(void) {} +#endif /* CONFIG_EDAC_DEBUG */ + + +static int pnd2_probe(void) +{ + int rc; + + edac_dbg(2, "\n"); + rc = get_registers(); + if (rc) + return rc; + + return pnd2_register_mci(&pnd2_mci); +} + +static void pnd2_remove(void) +{ + edac_dbg(0, "\n"); + pnd2_unregister_mci(pnd2_mci); +} + +static struct dunit_ops apl_ops = { + .name = "pnd2/apl", + .type = APL, + .pmiaddr_shift = LOG2_PMI_ADDR_GRANULARITY, + .pmiidx_shift = 0, + .channels = APL_NUM_CHANNELS, + .dimms_per_channel = 1, + .rd_reg = apl_rd_reg, + .get_registers = apl_get_registers, + .check_ecc = apl_check_ecc_active, + .mk_region = apl_mk_region, + .get_dimm_config = apl_get_dimm_config, + .pmi2mem = apl_pmi2mem, +}; + +static struct dunit_ops dnv_ops = { + .name = "pnd2/dnv", + .type = DNV, + .pmiaddr_shift = 0, + .pmiidx_shift = 1, + .channels = DNV_NUM_CHANNELS, + .dimms_per_channel = 2, + .rd_reg = dnv_rd_reg, + .get_registers = dnv_get_registers, + .check_ecc = dnv_check_ecc_active, + .mk_region = dnv_mk_region, + .get_dimm_config = dnv_get_dimm_config, + .pmi2mem = dnv_pmi2mem, +}; + +static const struct x86_cpu_id pnd2_cpuids[] = { + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, &apl_ops), + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, &dnv_ops), + { } +}; +MODULE_DEVICE_TABLE(x86cpu, pnd2_cpuids); + +static int __init pnd2_init(void) +{ + const struct x86_cpu_id *id; + const char *owner; + int rc; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + id = x86_match_cpu(pnd2_cpuids); + if (!id) + return -ENODEV; + + ops = (struct dunit_ops *)id->driver_data; + + if (ops->type == APL) { + p2sb_bus = pci_find_bus(0, 0); + if (!p2sb_bus) + return -ENODEV; + } + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + rc = pnd2_probe(); + if (rc < 0) { + pnd2_printk(KERN_ERR, "Failed to register device with error %d.\n", rc); + return rc; + } + + if (!pnd2_mci) + return -ENODEV; + + mce_register_decode_chain(&pnd2_mce_dec); + setup_pnd2_debug(); + + return 0; +} + +static void __exit pnd2_exit(void) +{ + edac_dbg(2, "\n"); + teardown_pnd2_debug(); + mce_unregister_decode_chain(&pnd2_mce_dec); + pnd2_remove(); +} + +module_init(pnd2_init); +module_exit(pnd2_exit); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Tony Luck"); +MODULE_DESCRIPTION("MC Driver for Intel SoC using Pondicherry memory controller"); diff --git a/drivers/edac/pnd2_edac.h b/drivers/edac/pnd2_edac.h new file mode 100644 index 000000000..028ef7017 --- /dev/null +++ b/drivers/edac/pnd2_edac.h @@ -0,0 +1,293 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Register bitfield descriptions for Pondicherry2 memory controller. + * + * Copyright (c) 2016, Intel Corporation. + */ + +#ifndef _PND2_REGS_H +#define _PND2_REGS_H + +struct b_cr_touud_lo_pci { + u32 lock : 1; + u32 reserved_1 : 19; + u32 touud : 12; +}; + +#define b_cr_touud_lo_pci_port 0x4c +#define b_cr_touud_lo_pci_offset 0xa8 +#define b_cr_touud_lo_pci_r_opcode 0x04 + +struct b_cr_touud_hi_pci { + u32 touud : 7; + u32 reserved_0 : 25; +}; + +#define b_cr_touud_hi_pci_port 0x4c +#define b_cr_touud_hi_pci_offset 0xac +#define b_cr_touud_hi_pci_r_opcode 0x04 + +struct b_cr_tolud_pci { + u32 lock : 1; + u32 reserved_0 : 19; + u32 tolud : 12; +}; + +#define b_cr_tolud_pci_port 0x4c +#define b_cr_tolud_pci_offset 0xbc +#define b_cr_tolud_pci_r_opcode 0x04 + +struct b_cr_mchbar_lo_pci { + u32 enable : 1; + u32 pad_3_1 : 3; + u32 pad_14_4: 11; + u32 base: 17; +}; + +struct b_cr_mchbar_hi_pci { + u32 base : 7; + u32 pad_31_7 : 25; +}; + +/* Symmetric region */ +struct b_cr_slice_channel_hash { + u64 slice_1_disabled : 1; + u64 hvm_mode : 1; + u64 interleave_mode : 2; + u64 slice_0_mem_disabled : 1; + u64 reserved_0 : 1; + u64 slice_hash_mask : 14; + u64 reserved_1 : 11; + u64 enable_pmi_dual_data_mode : 1; + u64 ch_1_disabled : 1; + u64 reserved_2 : 1; + u64 sym_slice0_channel_enabled : 2; + u64 sym_slice1_channel_enabled : 2; + u64 ch_hash_mask : 14; + u64 reserved_3 : 11; + u64 lock : 1; +}; + +#define b_cr_slice_channel_hash_port 0x4c +#define b_cr_slice_channel_hash_offset 0x4c58 +#define b_cr_slice_channel_hash_r_opcode 0x06 + +struct b_cr_mot_out_base_mchbar { + u32 reserved_0 : 14; + u32 mot_out_base : 15; + u32 reserved_1 : 1; + u32 tr_en : 1; + u32 imr_en : 1; +}; + +#define b_cr_mot_out_base_mchbar_port 0x4c +#define b_cr_mot_out_base_mchbar_offset 0x6af0 +#define b_cr_mot_out_base_mchbar_r_opcode 0x00 + +struct b_cr_mot_out_mask_mchbar { + u32 reserved_0 : 14; + u32 mot_out_mask : 15; + u32 reserved_1 : 1; + u32 ia_iwb_en : 1; + u32 gt_iwb_en : 1; +}; + +#define b_cr_mot_out_mask_mchbar_port 0x4c +#define b_cr_mot_out_mask_mchbar_offset 0x6af4 +#define b_cr_mot_out_mask_mchbar_r_opcode 0x00 + +struct b_cr_asym_mem_region0_mchbar { + u32 pad : 4; + u32 slice0_asym_base : 11; + u32 pad_18_15 : 4; + u32 slice0_asym_limit : 11; + u32 slice0_asym_channel_select : 1; + u32 slice0_asym_enable : 1; +}; + +#define b_cr_asym_mem_region0_mchbar_port 0x4c +#define b_cr_asym_mem_region0_mchbar_offset 0x6e40 +#define b_cr_asym_mem_region0_mchbar_r_opcode 0x00 + +struct b_cr_asym_mem_region1_mchbar { + u32 pad : 4; + u32 slice1_asym_base : 11; + u32 pad_18_15 : 4; + u32 slice1_asym_limit : 11; + u32 slice1_asym_channel_select : 1; + u32 slice1_asym_enable : 1; +}; + +#define b_cr_asym_mem_region1_mchbar_port 0x4c +#define b_cr_asym_mem_region1_mchbar_offset 0x6e44 +#define b_cr_asym_mem_region1_mchbar_r_opcode 0x00 + +/* Some bit fields moved in above two structs on Denverton */ +struct b_cr_asym_mem_region_denverton { + u32 pad : 4; + u32 slice_asym_base : 8; + u32 pad_19_12 : 8; + u32 slice_asym_limit : 8; + u32 pad_28_30 : 3; + u32 slice_asym_enable : 1; +}; + +struct b_cr_asym_2way_mem_region_mchbar { + u32 pad : 2; + u32 asym_2way_intlv_mode : 2; + u32 asym_2way_base : 11; + u32 pad_16_15 : 2; + u32 asym_2way_limit : 11; + u32 pad_30_28 : 3; + u32 asym_2way_interleave_enable : 1; +}; + +#define b_cr_asym_2way_mem_region_mchbar_port 0x4c +#define b_cr_asym_2way_mem_region_mchbar_offset 0x6e50 +#define b_cr_asym_2way_mem_region_mchbar_r_opcode 0x00 + +/* Apollo Lake d-unit */ + +struct d_cr_drp0 { + u32 rken0 : 1; + u32 rken1 : 1; + u32 ddmen : 1; + u32 rsvd3 : 1; + u32 dwid : 2; + u32 dden : 3; + u32 rsvd13_9 : 5; + u32 rsien : 1; + u32 bahen : 1; + u32 rsvd18_16 : 3; + u32 caswizzle : 2; + u32 eccen : 1; + u32 dramtype : 3; + u32 blmode : 3; + u32 addrdec : 2; + u32 dramdevice_pr : 2; +}; + +#define d_cr_drp0_offset 0x1400 +#define d_cr_drp0_r_opcode 0x00 + +/* Denverton d-unit */ + +struct d_cr_dsch { + u32 ch0en : 1; + u32 ch1en : 1; + u32 ddr4en : 1; + u32 coldwake : 1; + u32 newbypdis : 1; + u32 chan_width : 1; + u32 rsvd6_6 : 1; + u32 ooodis : 1; + u32 rsvd18_8 : 11; + u32 ic : 1; + u32 rsvd31_20 : 12; +}; + +#define d_cr_dsch_port 0x16 +#define d_cr_dsch_offset 0x0 +#define d_cr_dsch_r_opcode 0x0 + +struct d_cr_ecc_ctrl { + u32 eccen : 1; + u32 rsvd31_1 : 31; +}; + +#define d_cr_ecc_ctrl_offset 0x180 +#define d_cr_ecc_ctrl_r_opcode 0x0 + +struct d_cr_drp { + u32 rken0 : 1; + u32 rken1 : 1; + u32 rken2 : 1; + u32 rken3 : 1; + u32 dimmdwid0 : 2; + u32 dimmdden0 : 2; + u32 dimmdwid1 : 2; + u32 dimmdden1 : 2; + u32 rsvd15_12 : 4; + u32 dimmflip : 1; + u32 rsvd31_17 : 15; +}; + +#define d_cr_drp_offset 0x158 +#define d_cr_drp_r_opcode 0x0 + +struct d_cr_dmap { + u32 ba0 : 5; + u32 ba1 : 5; + u32 bg0 : 5; /* if ddr3, ba2 = bg0 */ + u32 bg1 : 5; /* if ddr3, ba3 = bg1 */ + u32 rs0 : 5; + u32 rs1 : 5; + u32 rsvd : 2; +}; + +#define d_cr_dmap_offset 0x174 +#define d_cr_dmap_r_opcode 0x0 + +struct d_cr_dmap1 { + u32 ca11 : 6; + u32 bxor : 1; + u32 rsvd : 25; +}; + +#define d_cr_dmap1_offset 0xb4 +#define d_cr_dmap1_r_opcode 0x0 + +struct d_cr_dmap2 { + u32 row0 : 5; + u32 row1 : 5; + u32 row2 : 5; + u32 row3 : 5; + u32 row4 : 5; + u32 row5 : 5; + u32 rsvd : 2; +}; + +#define d_cr_dmap2_offset 0x148 +#define d_cr_dmap2_r_opcode 0x0 + +struct d_cr_dmap3 { + u32 row6 : 5; + u32 row7 : 5; + u32 row8 : 5; + u32 row9 : 5; + u32 row10 : 5; + u32 row11 : 5; + u32 rsvd : 2; +}; + +#define d_cr_dmap3_offset 0x14c +#define d_cr_dmap3_r_opcode 0x0 + +struct d_cr_dmap4 { + u32 row12 : 5; + u32 row13 : 5; + u32 row14 : 5; + u32 row15 : 5; + u32 row16 : 5; + u32 row17 : 5; + u32 rsvd : 2; +}; + +#define d_cr_dmap4_offset 0x150 +#define d_cr_dmap4_r_opcode 0x0 + +struct d_cr_dmap5 { + u32 ca3 : 4; + u32 ca4 : 4; + u32 ca5 : 4; + u32 ca6 : 4; + u32 ca7 : 4; + u32 ca8 : 4; + u32 ca9 : 4; + u32 rsvd : 4; +}; + +#define d_cr_dmap5_offset 0x154 +#define d_cr_dmap5_r_opcode 0x0 + +#endif /* _PND2_REGS_H */ diff --git a/drivers/edac/ppc4xx_edac.c b/drivers/edac/ppc4xx_edac.c new file mode 100644 index 000000000..046969b4e --- /dev/null +++ b/drivers/edac/ppc4xx_edac.c @@ -0,0 +1,1428 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson <gerickson@nuovations.com> + */ + +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/types.h> + +#include <asm/dcr.h> + +#include "edac_module.h" +#include "ppc4xx_edac.h" + +/* + * This file implements a driver for monitoring and handling events + * associated with the IMB DDR2 ECC controller found in the AMCC/IBM + * 405EX[r], 440SP, 440SPe, 460EX, 460GT and 460SX. + * + * As realized in the 405EX[r], this controller features: + * + * - Support for registered- and non-registered DDR1 and DDR2 memory. + * - 32-bit or 16-bit memory interface with optional ECC. + * + * o ECC support includes: + * + * - 4-bit SEC/DED + * - Aligned-nibble error detect + * - Bypass mode + * + * - Two (2) memory banks/ranks. + * - Up to 1 GiB per bank/rank in 32-bit mode and up to 512 MiB per + * bank/rank in 16-bit mode. + * + * As realized in the 440SP and 440SPe, this controller changes/adds: + * + * - 64-bit or 32-bit memory interface with optional ECC. + * + * o ECC support includes: + * + * - 8-bit SEC/DED + * - Aligned-nibble error detect + * - Bypass mode + * + * - Up to 4 GiB per bank/rank in 64-bit mode and up to 2 GiB + * per bank/rank in 32-bit mode. + * + * As realized in the 460EX and 460GT, this controller changes/adds: + * + * - 64-bit or 32-bit memory interface with optional ECC. + * + * o ECC support includes: + * + * - 8-bit SEC/DED + * - Aligned-nibble error detect + * - Bypass mode + * + * - Four (4) memory banks/ranks. + * - Up to 16 GiB per bank/rank in 64-bit mode and up to 8 GiB + * per bank/rank in 32-bit mode. + * + * At present, this driver has ONLY been tested against the controller + * realization in the 405EX[r] on the AMCC Kilauea and Haleakala + * boards (256 MiB w/o ECC memory soldered onto the board) and a + * proprietary board based on those designs (128 MiB ECC memory, also + * soldered onto the board). + * + * Dynamic feature detection and handling needs to be added for the + * other realizations of this controller listed above. + * + * Eventually, this driver will likely be adapted to the above variant + * realizations of this controller as well as broken apart to handle + * the other known ECC-capable controllers prevalent in other 4xx + * processors: + * + * - IBM SDRAM (405GP, 405CR and 405EP) "ibm,sdram-4xx" + * - IBM DDR1 (440GP, 440GX, 440EP and 440GR) "ibm,sdram-4xx-ddr" + * - Denali DDR1/DDR2 (440EPX and 440GRX) "denali,sdram-4xx-ddr2" + * + * For this controller, unfortunately, correctable errors report + * nothing more than the beat/cycle and byte/lane the correction + * occurred on and the check bit group that covered the error. + * + * In contrast, uncorrectable errors also report the failing address, + * the bus master and the transaction direction (i.e. read or write) + * + * Regardless of whether the error is a CE or a UE, we report the + * following pieces of information in the driver-unique message to the + * EDAC subsystem: + * + * - Device tree path + * - Bank(s) + * - Check bit error group + * - Beat(s)/lane(s) + */ + +/* Preprocessor Definitions */ + +#define EDAC_OPSTATE_INT_STR "interrupt" +#define EDAC_OPSTATE_POLL_STR "polled" +#define EDAC_OPSTATE_UNKNOWN_STR "unknown" + +#define PPC4XX_EDAC_MODULE_NAME "ppc4xx_edac" +#define PPC4XX_EDAC_MODULE_REVISION "v1.0.0" + +#define PPC4XX_EDAC_MESSAGE_SIZE 256 + +/* + * Kernel logging without an EDAC instance + */ +#define ppc4xx_edac_printk(level, fmt, arg...) \ + edac_printk(level, "PPC4xx MC", fmt, ##arg) + +/* + * Kernel logging with an EDAC instance + */ +#define ppc4xx_edac_mc_printk(level, mci, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "PPC4xx", fmt, ##arg) + +/* + * Macros to convert bank configuration size enumerations into MiB and + * page values. + */ +#define SDRAM_MBCF_SZ_MiB_MIN 4 +#define SDRAM_MBCF_SZ_TO_MiB(n) (SDRAM_MBCF_SZ_MiB_MIN \ + << (SDRAM_MBCF_SZ_DECODE(n))) +#define SDRAM_MBCF_SZ_TO_PAGES(n) (SDRAM_MBCF_SZ_MiB_MIN \ + << (20 - PAGE_SHIFT + \ + SDRAM_MBCF_SZ_DECODE(n))) + +/* + * The ibm,sdram-4xx-ddr2 Device Control Registers (DCRs) are + * indirectly accessed and have a base and length defined by the + * device tree. The base can be anything; however, we expect the + * length to be precisely two registers, the first for the address + * window and the second for the data window. + */ +#define SDRAM_DCR_RESOURCE_LEN 2 +#define SDRAM_DCR_ADDR_OFFSET 0 +#define SDRAM_DCR_DATA_OFFSET 1 + +/* + * Device tree interrupt indices + */ +#define INTMAP_ECCDED_INDEX 0 /* Double-bit Error Detect */ +#define INTMAP_ECCSEC_INDEX 1 /* Single-bit Error Correct */ + +/* Type Definitions */ + +/* + * PPC4xx SDRAM memory controller private instance data + */ +struct ppc4xx_edac_pdata { + dcr_host_t dcr_host; /* Indirect DCR address/data window mapping */ + struct { + int sec; /* Single-bit correctable error IRQ assigned */ + int ded; /* Double-bit detectable error IRQ assigned */ + } irqs; +}; + +/* + * Various status data gathered and manipulated when checking and + * reporting ECC status. + */ +struct ppc4xx_ecc_status { + u32 ecces; + u32 besr; + u32 bearh; + u32 bearl; + u32 wmirq; +}; + +/* Global Variables */ + +/* + * Device tree node type and compatible tuples this driver can match + * on. + */ +static const struct of_device_id ppc4xx_edac_match[] = { + { + .compatible = "ibm,sdram-4xx-ddr2" + }, + { } +}; +MODULE_DEVICE_TABLE(of, ppc4xx_edac_match); + +/* + * TODO: The row and channel parameters likely need to be dynamically + * set based on the aforementioned variant controller realizations. + */ +static const unsigned ppc4xx_edac_nr_csrows = 2; +static const unsigned ppc4xx_edac_nr_chans = 1; + +/* + * Strings associated with PLB master IDs capable of being posted in + * SDRAM_BESR or SDRAM_WMIRQ on uncorrectable ECC errors. + */ +static const char * const ppc4xx_plb_masters[9] = { + [SDRAM_PLB_M0ID_ICU] = "ICU", + [SDRAM_PLB_M0ID_PCIE0] = "PCI-E 0", + [SDRAM_PLB_M0ID_PCIE1] = "PCI-E 1", + [SDRAM_PLB_M0ID_DMA] = "DMA", + [SDRAM_PLB_M0ID_DCU] = "DCU", + [SDRAM_PLB_M0ID_OPB] = "OPB", + [SDRAM_PLB_M0ID_MAL] = "MAL", + [SDRAM_PLB_M0ID_SEC] = "SEC", + [SDRAM_PLB_M0ID_AHB] = "AHB" +}; + +/** + * mfsdram - read and return controller register data + * @dcr_host: A pointer to the DCR mapping. + * @idcr_n: The indirect DCR register to read. + * + * This routine reads and returns the data associated with the + * controller's specified indirect DCR register. + * + * Returns the read data. + */ +static inline u32 +mfsdram(const dcr_host_t *dcr_host, unsigned int idcr_n) +{ + return __mfdcri(dcr_host->base + SDRAM_DCR_ADDR_OFFSET, + dcr_host->base + SDRAM_DCR_DATA_OFFSET, + idcr_n); +} + +/** + * mtsdram - write controller register data + * @dcr_host: A pointer to the DCR mapping. + * @idcr_n: The indirect DCR register to write. + * @value: The data to write. + * + * This routine writes the provided data to the controller's specified + * indirect DCR register. + */ +static inline void +mtsdram(const dcr_host_t *dcr_host, unsigned int idcr_n, u32 value) +{ + return __mtdcri(dcr_host->base + SDRAM_DCR_ADDR_OFFSET, + dcr_host->base + SDRAM_DCR_DATA_OFFSET, + idcr_n, + value); +} + +/** + * ppc4xx_edac_check_bank_error - check a bank for an ECC bank error + * @status: A pointer to the ECC status structure to check for an + * ECC bank error. + * @bank: The bank to check for an ECC error. + * + * This routine determines whether the specified bank has an ECC + * error. + * + * Returns true if the specified bank has an ECC error; otherwise, + * false. + */ +static bool +ppc4xx_edac_check_bank_error(const struct ppc4xx_ecc_status *status, + unsigned int bank) +{ + switch (bank) { + case 0: + return status->ecces & SDRAM_ECCES_BK0ER; + case 1: + return status->ecces & SDRAM_ECCES_BK1ER; + default: + return false; + } +} + +/** + * ppc4xx_edac_generate_bank_message - generate interpretted bank status message + * @mci: A pointer to the EDAC memory controller instance associated + * with the bank message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the portion of the + * driver-unique report message associated with the ECCESS[BKNER] + * field of the specified ECC status. + * + * Returns the number of characters generated on success; otherwise, < + * 0 on error. + */ +static int +ppc4xx_edac_generate_bank_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + int n, total = 0; + unsigned int row, rows; + + n = snprintf(buffer, size, "%s: Banks: ", mci->dev_name); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + for (rows = 0, row = 0; row < mci->nr_csrows; row++) { + if (ppc4xx_edac_check_bank_error(status, row)) { + n = snprintf(buffer, size, "%s%u", + (rows++ ? ", " : ""), row); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + } + } + + n = snprintf(buffer, size, "%s; ", rows ? "" : "None"); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + fail: + return total; +} + +/** + * ppc4xx_edac_generate_checkbit_message - generate interpretted checkbit message + * @mci: A pointer to the EDAC memory controller instance associated + * with the checkbit message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the portion of the + * driver-unique report message associated with the ECCESS[CKBER] + * field of the specified ECC status. + * + * Returns the number of characters generated on success; otherwise, < + * 0 on error. + */ +static int +ppc4xx_edac_generate_checkbit_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + const struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + const char *ckber = NULL; + + switch (status->ecces & SDRAM_ECCES_CKBER_MASK) { + case SDRAM_ECCES_CKBER_NONE: + ckber = "None"; + break; + case SDRAM_ECCES_CKBER_32_ECC_0_3: + ckber = "ECC0:3"; + break; + case SDRAM_ECCES_CKBER_32_ECC_4_8: + switch (mfsdram(&pdata->dcr_host, SDRAM_MCOPT1) & + SDRAM_MCOPT1_WDTH_MASK) { + case SDRAM_MCOPT1_WDTH_16: + ckber = "ECC0:3"; + break; + case SDRAM_MCOPT1_WDTH_32: + ckber = "ECC4:8"; + break; + default: + ckber = "Unknown"; + break; + } + break; + case SDRAM_ECCES_CKBER_32_ECC_0_8: + ckber = "ECC0:8"; + break; + default: + ckber = "Unknown"; + break; + } + + return snprintf(buffer, size, "Checkbit Error: %s", ckber); +} + +/** + * ppc4xx_edac_generate_lane_message - generate interpretted byte lane message + * @mci: A pointer to the EDAC memory controller instance associated + * with the byte lane message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the portion of the + * driver-unique report message associated with the ECCESS[BNCE] + * field of the specified ECC status. + * + * Returns the number of characters generated on success; otherwise, < + * 0 on error. + */ +static int +ppc4xx_edac_generate_lane_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + int n, total = 0; + unsigned int lane, lanes; + const unsigned int first_lane = 0; + const unsigned int lane_count = 16; + + n = snprintf(buffer, size, "; Byte Lane Errors: "); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + for (lanes = 0, lane = first_lane; lane < lane_count; lane++) { + if ((status->ecces & SDRAM_ECCES_BNCE_ENCODE(lane)) != 0) { + n = snprintf(buffer, size, + "%s%u", + (lanes++ ? ", " : ""), lane); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + } + } + + n = snprintf(buffer, size, "%s; ", lanes ? "" : "None"); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + fail: + return total; +} + +/** + * ppc4xx_edac_generate_ecc_message - generate interpretted ECC status message + * @mci: A pointer to the EDAC memory controller instance associated + * with the ECCES message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the portion of the + * driver-unique report message associated with the ECCESS register of + * the specified ECC status. + * + * Returns the number of characters generated on success; otherwise, < + * 0 on error. + */ +static int +ppc4xx_edac_generate_ecc_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + int n, total = 0; + + n = ppc4xx_edac_generate_bank_message(mci, status, buffer, size); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + n = ppc4xx_edac_generate_checkbit_message(mci, status, buffer, size); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + n = ppc4xx_edac_generate_lane_message(mci, status, buffer, size); + + if (n < 0 || n >= size) + goto fail; + + buffer += n; + size -= n; + total += n; + + fail: + return total; +} + +/** + * ppc4xx_edac_generate_plb_message - generate interpretted PLB status message + * @mci: A pointer to the EDAC memory controller instance associated + * with the PLB message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the portion of the + * driver-unique report message associated with the PLB-related BESR + * and/or WMIRQ registers of the specified ECC status. + * + * Returns the number of characters generated on success; otherwise, < + * 0 on error. + */ +static int +ppc4xx_edac_generate_plb_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + unsigned int master; + bool read; + + if ((status->besr & SDRAM_BESR_MASK) == 0) + return 0; + + if ((status->besr & SDRAM_BESR_M0ET_MASK) == SDRAM_BESR_M0ET_NONE) + return 0; + + read = ((status->besr & SDRAM_BESR_M0RW_MASK) == SDRAM_BESR_M0RW_READ); + + master = SDRAM_BESR_M0ID_DECODE(status->besr); + + return snprintf(buffer, size, + "%s error w/ PLB master %u \"%s\"; ", + (read ? "Read" : "Write"), + master, + (((master >= SDRAM_PLB_M0ID_FIRST) && + (master <= SDRAM_PLB_M0ID_LAST)) ? + ppc4xx_plb_masters[master] : "UNKNOWN")); +} + +/** + * ppc4xx_edac_generate_message - generate interpretted status message + * @mci: A pointer to the EDAC memory controller instance associated + * with the driver-unique message being generated. + * @status: A pointer to the ECC status structure to generate the + * message from. + * @buffer: A pointer to the buffer in which to generate the + * message. + * @size: The size, in bytes, of space available in buffer. + * + * This routine generates to the provided buffer the driver-unique + * EDAC report message from the specified ECC status. + */ +static void +ppc4xx_edac_generate_message(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status, + char *buffer, + size_t size) +{ + int n; + + if (buffer == NULL || size == 0) + return; + + n = ppc4xx_edac_generate_ecc_message(mci, status, buffer, size); + + if (n < 0 || n >= size) + return; + + buffer += n; + size -= n; + + ppc4xx_edac_generate_plb_message(mci, status, buffer, size); +} + +#ifdef DEBUG +/** + * ppc4xx_ecc_dump_status - dump controller ECC status registers + * @mci: A pointer to the EDAC memory controller instance + * associated with the status being dumped. + * @status: A pointer to the ECC status structure to generate the + * dump from. + * + * This routine dumps to the kernel log buffer the raw and + * interpretted specified ECC status. + */ +static void +ppc4xx_ecc_dump_status(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status) +{ + char message[PPC4XX_EDAC_MESSAGE_SIZE]; + + ppc4xx_edac_generate_message(mci, status, message, sizeof(message)); + + ppc4xx_edac_mc_printk(KERN_INFO, mci, + "\n" + "\tECCES: 0x%08x\n" + "\tWMIRQ: 0x%08x\n" + "\tBESR: 0x%08x\n" + "\tBEAR: 0x%08x%08x\n" + "\t%s\n", + status->ecces, + status->wmirq, + status->besr, + status->bearh, + status->bearl, + message); +} +#endif /* DEBUG */ + +/** + * ppc4xx_ecc_get_status - get controller ECC status + * @mci: A pointer to the EDAC memory controller instance + * associated with the status being retrieved. + * @status: A pointer to the ECC status structure to populate the + * ECC status with. + * + * This routine reads and masks, as appropriate, all the relevant + * status registers that deal with ibm,sdram-4xx-ddr2 ECC errors. + * While we read all of them, for correctable errors, we only expect + * to deal with ECCES. For uncorrectable errors, we expect to deal + * with all of them. + */ +static void +ppc4xx_ecc_get_status(const struct mem_ctl_info *mci, + struct ppc4xx_ecc_status *status) +{ + const struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + const dcr_host_t *dcr_host = &pdata->dcr_host; + + status->ecces = mfsdram(dcr_host, SDRAM_ECCES) & SDRAM_ECCES_MASK; + status->wmirq = mfsdram(dcr_host, SDRAM_WMIRQ) & SDRAM_WMIRQ_MASK; + status->besr = mfsdram(dcr_host, SDRAM_BESR) & SDRAM_BESR_MASK; + status->bearl = mfsdram(dcr_host, SDRAM_BEARL); + status->bearh = mfsdram(dcr_host, SDRAM_BEARH); +} + +/** + * ppc4xx_ecc_clear_status - clear controller ECC status + * @mci: A pointer to the EDAC memory controller instance + * associated with the status being cleared. + * @status: A pointer to the ECC status structure containing the + * values to write to clear the ECC status. + * + * This routine clears--by writing the masked (as appropriate) status + * values back to--the status registers that deal with + * ibm,sdram-4xx-ddr2 ECC errors. + */ +static void +ppc4xx_ecc_clear_status(const struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status) +{ + const struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + const dcr_host_t *dcr_host = &pdata->dcr_host; + + mtsdram(dcr_host, SDRAM_ECCES, status->ecces & SDRAM_ECCES_MASK); + mtsdram(dcr_host, SDRAM_WMIRQ, status->wmirq & SDRAM_WMIRQ_MASK); + mtsdram(dcr_host, SDRAM_BESR, status->besr & SDRAM_BESR_MASK); + mtsdram(dcr_host, SDRAM_BEARL, 0); + mtsdram(dcr_host, SDRAM_BEARH, 0); +} + +/** + * ppc4xx_edac_handle_ce - handle controller correctable ECC error (CE) + * @mci: A pointer to the EDAC memory controller instance + * associated with the correctable error being handled and reported. + * @status: A pointer to the ECC status structure associated with + * the correctable error being handled and reported. + * + * This routine handles an ibm,sdram-4xx-ddr2 controller ECC + * correctable error. Per the aforementioned discussion, there's not + * enough status available to use the full EDAC correctable error + * interface, so we just pass driver-unique message to the "no info" + * interface. + */ +static void +ppc4xx_edac_handle_ce(struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status) +{ + int row; + char message[PPC4XX_EDAC_MESSAGE_SIZE]; + + ppc4xx_edac_generate_message(mci, status, message, sizeof(message)); + + for (row = 0; row < mci->nr_csrows; row++) + if (ppc4xx_edac_check_bank_error(status, row)) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + 0, 0, 0, + row, 0, -1, + message, ""); +} + +/** + * ppc4xx_edac_handle_ue - handle controller uncorrectable ECC error (UE) + * @mci: A pointer to the EDAC memory controller instance + * associated with the uncorrectable error being handled and + * reported. + * @status: A pointer to the ECC status structure associated with + * the uncorrectable error being handled and reported. + * + * This routine handles an ibm,sdram-4xx-ddr2 controller ECC + * uncorrectable error. + */ +static void +ppc4xx_edac_handle_ue(struct mem_ctl_info *mci, + const struct ppc4xx_ecc_status *status) +{ + const u64 bear = ((u64)status->bearh << 32 | status->bearl); + const unsigned long page = bear >> PAGE_SHIFT; + const unsigned long offset = bear & ~PAGE_MASK; + int row; + char message[PPC4XX_EDAC_MESSAGE_SIZE]; + + ppc4xx_edac_generate_message(mci, status, message, sizeof(message)); + + for (row = 0; row < mci->nr_csrows; row++) + if (ppc4xx_edac_check_bank_error(status, row)) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + page, offset, 0, + row, 0, -1, + message, ""); +} + +/** + * ppc4xx_edac_check - check controller for ECC errors + * @mci: A pointer to the EDAC memory controller instance + * associated with the ibm,sdram-4xx-ddr2 controller being + * checked. + * + * This routine is used to check and post ECC errors and is called by + * both the EDAC polling thread and this driver's CE and UE interrupt + * handler. + */ +static void +ppc4xx_edac_check(struct mem_ctl_info *mci) +{ +#ifdef DEBUG + static unsigned int count; +#endif + struct ppc4xx_ecc_status status; + + ppc4xx_ecc_get_status(mci, &status); + +#ifdef DEBUG + if (count++ % 30 == 0) + ppc4xx_ecc_dump_status(mci, &status); +#endif + + if (status.ecces & SDRAM_ECCES_UE) + ppc4xx_edac_handle_ue(mci, &status); + + if (status.ecces & SDRAM_ECCES_CE) + ppc4xx_edac_handle_ce(mci, &status); + + ppc4xx_ecc_clear_status(mci, &status); +} + +/** + * ppc4xx_edac_isr - SEC (CE) and DED (UE) interrupt service routine + * @irq: The virtual interrupt number being serviced. + * @dev_id: A pointer to the EDAC memory controller instance + * associated with the interrupt being handled. + * + * This routine implements the interrupt handler for both correctable + * (CE) and uncorrectable (UE) ECC errors for the ibm,sdram-4xx-ddr2 + * controller. It simply calls through to the same routine used during + * polling to check, report and clear the ECC status. + * + * Unconditionally returns IRQ_HANDLED. + */ +static irqreturn_t +ppc4xx_edac_isr(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + + ppc4xx_edac_check(mci); + + return IRQ_HANDLED; +} + +/** + * ppc4xx_edac_get_dtype - return the controller memory width + * @mcopt1: The 32-bit Memory Controller Option 1 register value + * currently set for the controller, from which the width + * is derived. + * + * This routine returns the EDAC device type width appropriate for the + * current controller configuration. + * + * TODO: This needs to be conditioned dynamically through feature + * flags or some such when other controller variants are supported as + * the 405EX[r] is 16-/32-bit and the others are 32-/64-bit with the + * 16- and 64-bit field definition/value/enumeration (b1) overloaded + * among them. + * + * Returns a device type width enumeration. + */ +static enum dev_type ppc4xx_edac_get_dtype(u32 mcopt1) +{ + switch (mcopt1 & SDRAM_MCOPT1_WDTH_MASK) { + case SDRAM_MCOPT1_WDTH_16: + return DEV_X2; + case SDRAM_MCOPT1_WDTH_32: + return DEV_X4; + default: + return DEV_UNKNOWN; + } +} + +/** + * ppc4xx_edac_get_mtype - return controller memory type + * @mcopt1: The 32-bit Memory Controller Option 1 register value + * currently set for the controller, from which the memory type + * is derived. + * + * This routine returns the EDAC memory type appropriate for the + * current controller configuration. + * + * Returns a memory type enumeration. + */ +static enum mem_type ppc4xx_edac_get_mtype(u32 mcopt1) +{ + bool rden = ((mcopt1 & SDRAM_MCOPT1_RDEN_MASK) == SDRAM_MCOPT1_RDEN); + + switch (mcopt1 & SDRAM_MCOPT1_DDR_TYPE_MASK) { + case SDRAM_MCOPT1_DDR2_TYPE: + return rden ? MEM_RDDR2 : MEM_DDR2; + case SDRAM_MCOPT1_DDR1_TYPE: + return rden ? MEM_RDDR : MEM_DDR; + default: + return MEM_UNKNOWN; + } +} + +/** + * ppc4xx_edac_init_csrows - initialize driver instance rows + * @mci: A pointer to the EDAC memory controller instance + * associated with the ibm,sdram-4xx-ddr2 controller for which + * the csrows (i.e. banks/ranks) are being initialized. + * @mcopt1: The 32-bit Memory Controller Option 1 register value + * currently set for the controller, from which bank width + * and memory typ information is derived. + * + * This routine initializes the virtual "chip select rows" associated + * with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2 + * controller bank/rank is mapped to a row. + * + * Returns 0 if OK; otherwise, -EINVAL if the memory bank size + * configuration cannot be determined. + */ +static int ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1) +{ + const struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + int status = 0; + enum mem_type mtype; + enum dev_type dtype; + enum edac_type edac_mode; + int row, j; + u32 mbxcf, size, nr_pages; + + /* Establish the memory type and width */ + + mtype = ppc4xx_edac_get_mtype(mcopt1); + dtype = ppc4xx_edac_get_dtype(mcopt1); + + /* Establish EDAC mode */ + + if (mci->edac_cap & EDAC_FLAG_SECDED) + edac_mode = EDAC_SECDED; + else if (mci->edac_cap & EDAC_FLAG_EC) + edac_mode = EDAC_EC; + else + edac_mode = EDAC_NONE; + + /* + * Initialize each chip select row structure which correspond + * 1:1 with a controller bank/rank. + */ + + for (row = 0; row < mci->nr_csrows; row++) { + struct csrow_info *csi = mci->csrows[row]; + + /* + * Get the configuration settings for this + * row/bank/rank and skip disabled banks. + */ + + mbxcf = mfsdram(&pdata->dcr_host, SDRAM_MBXCF(row)); + + if ((mbxcf & SDRAM_MBCF_BE_MASK) != SDRAM_MBCF_BE_ENABLE) + continue; + + /* Map the bank configuration size setting to pages. */ + + size = mbxcf & SDRAM_MBCF_SZ_MASK; + + switch (size) { + case SDRAM_MBCF_SZ_4MB: + case SDRAM_MBCF_SZ_8MB: + case SDRAM_MBCF_SZ_16MB: + case SDRAM_MBCF_SZ_32MB: + case SDRAM_MBCF_SZ_64MB: + case SDRAM_MBCF_SZ_128MB: + case SDRAM_MBCF_SZ_256MB: + case SDRAM_MBCF_SZ_512MB: + case SDRAM_MBCF_SZ_1GB: + case SDRAM_MBCF_SZ_2GB: + case SDRAM_MBCF_SZ_4GB: + case SDRAM_MBCF_SZ_8GB: + nr_pages = SDRAM_MBCF_SZ_TO_PAGES(size); + break; + default: + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Unrecognized memory bank %d " + "size 0x%08x\n", + row, SDRAM_MBCF_SZ_DECODE(size)); + status = -EINVAL; + goto done; + } + + /* + * It's unclear exactly what grain should be set to + * here. The SDRAM_ECCES register allows resolution of + * an error down to a nibble which would potentially + * argue for a grain of '1' byte, even though we only + * know the associated address for uncorrectable + * errors. This value is not used at present for + * anything other than error reporting so getting it + * wrong should be of little consequence. Other + * possible values would be the PLB width (16), the + * page size (PAGE_SIZE) or the memory width (2 or 4). + */ + for (j = 0; j < csi->nr_channels; j++) { + struct dimm_info *dimm = csi->channels[j]->dimm; + + dimm->nr_pages = nr_pages / csi->nr_channels; + dimm->grain = 1; + + dimm->mtype = mtype; + dimm->dtype = dtype; + + dimm->edac_mode = edac_mode; + } + } + + done: + return status; +} + +/** + * ppc4xx_edac_mc_init - initialize driver instance + * @mci: A pointer to the EDAC memory controller instance being + * initialized. + * @op: A pointer to the OpenFirmware device tree node associated + * with the controller this EDAC instance is bound to. + * @dcr_host: A pointer to the DCR data containing the DCR mapping + * for this controller instance. + * @mcopt1: The 32-bit Memory Controller Option 1 register value + * currently set for the controller, from which ECC capabilities + * and scrub mode are derived. + * + * This routine performs initialization of the EDAC memory controller + * instance and related driver-private data associated with the + * ibm,sdram-4xx-ddr2 memory controller the instance is bound to. + * + * Returns 0 if OK; otherwise, < 0 on error. + */ +static int ppc4xx_edac_mc_init(struct mem_ctl_info *mci, + struct platform_device *op, + const dcr_host_t *dcr_host, u32 mcopt1) +{ + int status = 0; + const u32 memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK); + struct ppc4xx_edac_pdata *pdata = NULL; + const struct device_node *np = op->dev.of_node; + + if (of_match_device(ppc4xx_edac_match, &op->dev) == NULL) + return -EINVAL; + + /* Initial driver pointers and private data */ + + mci->pdev = &op->dev; + + dev_set_drvdata(mci->pdev, mci); + + pdata = mci->pvt_info; + + pdata->dcr_host = *dcr_host; + + /* Initialize controller capabilities and configuration */ + + mci->mtype_cap = (MEM_FLAG_DDR | MEM_FLAG_RDDR | + MEM_FLAG_DDR2 | MEM_FLAG_RDDR2); + + mci->edac_ctl_cap = (EDAC_FLAG_NONE | + EDAC_FLAG_EC | + EDAC_FLAG_SECDED); + + mci->scrub_cap = SCRUB_NONE; + mci->scrub_mode = SCRUB_NONE; + + /* + * Update the actual capabilites based on the MCOPT1[MCHK] + * settings. Scrubbing is only useful if reporting is enabled. + */ + + switch (memcheck) { + case SDRAM_MCOPT1_MCHK_CHK: + mci->edac_cap = EDAC_FLAG_EC; + break; + case SDRAM_MCOPT1_MCHK_CHK_REP: + mci->edac_cap = (EDAC_FLAG_EC | EDAC_FLAG_SECDED); + mci->scrub_mode = SCRUB_SW_SRC; + break; + default: + mci->edac_cap = EDAC_FLAG_NONE; + break; + } + + /* Initialize strings */ + + mci->mod_name = PPC4XX_EDAC_MODULE_NAME; + mci->ctl_name = ppc4xx_edac_match->compatible; + mci->dev_name = np->full_name; + + /* Initialize callbacks */ + + mci->edac_check = ppc4xx_edac_check; + mci->ctl_page_to_phys = NULL; + + /* Initialize chip select rows */ + + status = ppc4xx_edac_init_csrows(mci, mcopt1); + + if (status) + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Failed to initialize rows!\n"); + + return status; +} + +/** + * ppc4xx_edac_register_irq - setup and register controller interrupts + * @op: A pointer to the OpenFirmware device tree node associated + * with the controller this EDAC instance is bound to. + * @mci: A pointer to the EDAC memory controller instance + * associated with the ibm,sdram-4xx-ddr2 controller for which + * interrupts are being registered. + * + * This routine parses the correctable (CE) and uncorrectable error (UE) + * interrupts from the device tree node and maps and assigns them to + * the associated EDAC memory controller instance. + * + * Returns 0 if OK; otherwise, -ENODEV if the interrupts could not be + * mapped and assigned. + */ +static int ppc4xx_edac_register_irq(struct platform_device *op, + struct mem_ctl_info *mci) +{ + int status = 0; + int ded_irq, sec_irq; + struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + struct device_node *np = op->dev.of_node; + + ded_irq = irq_of_parse_and_map(np, INTMAP_ECCDED_INDEX); + sec_irq = irq_of_parse_and_map(np, INTMAP_ECCSEC_INDEX); + + if (!ded_irq || !sec_irq) { + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Unable to map interrupts.\n"); + status = -ENODEV; + goto fail; + } + + status = request_irq(ded_irq, + ppc4xx_edac_isr, + 0, + "[EDAC] MC ECCDED", + mci); + + if (status < 0) { + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Unable to request irq %d for ECC DED", + ded_irq); + status = -ENODEV; + goto fail1; + } + + status = request_irq(sec_irq, + ppc4xx_edac_isr, + 0, + "[EDAC] MC ECCSEC", + mci); + + if (status < 0) { + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Unable to request irq %d for ECC SEC", + sec_irq); + status = -ENODEV; + goto fail2; + } + + ppc4xx_edac_mc_printk(KERN_INFO, mci, "ECCDED irq is %d\n", ded_irq); + ppc4xx_edac_mc_printk(KERN_INFO, mci, "ECCSEC irq is %d\n", sec_irq); + + pdata->irqs.ded = ded_irq; + pdata->irqs.sec = sec_irq; + + return 0; + + fail2: + free_irq(sec_irq, mci); + + fail1: + free_irq(ded_irq, mci); + + fail: + return status; +} + +/** + * ppc4xx_edac_map_dcrs - locate and map controller registers + * @np: A pointer to the device tree node containing the DCR + * resources to map. + * @dcr_host: A pointer to the DCR data to populate with the + * DCR mapping. + * + * This routine attempts to locate in the device tree and map the DCR + * register resources associated with the controller's indirect DCR + * address and data windows. + * + * Returns 0 if the DCRs were successfully mapped; otherwise, < 0 on + * error. + */ +static int ppc4xx_edac_map_dcrs(const struct device_node *np, + dcr_host_t *dcr_host) +{ + unsigned int dcr_base, dcr_len; + + if (np == NULL || dcr_host == NULL) + return -EINVAL; + + /* Get the DCR resource extent and sanity check the values. */ + + dcr_base = dcr_resource_start(np, 0); + dcr_len = dcr_resource_len(np, 0); + + if (dcr_base == 0 || dcr_len == 0) { + ppc4xx_edac_printk(KERN_ERR, + "Failed to obtain DCR property.\n"); + return -ENODEV; + } + + if (dcr_len != SDRAM_DCR_RESOURCE_LEN) { + ppc4xx_edac_printk(KERN_ERR, + "Unexpected DCR length %d, expected %d.\n", + dcr_len, SDRAM_DCR_RESOURCE_LEN); + return -ENODEV; + } + + /* Attempt to map the DCR extent. */ + + *dcr_host = dcr_map(np, dcr_base, dcr_len); + + if (!DCR_MAP_OK(*dcr_host)) { + ppc4xx_edac_printk(KERN_INFO, "Failed to map DCRs.\n"); + return -ENODEV; + } + + return 0; +} + +/** + * ppc4xx_edac_probe - check controller and bind driver + * @op: A pointer to the OpenFirmware device tree node associated + * with the controller being probed for driver binding. + * + * This routine probes a specific ibm,sdram-4xx-ddr2 controller + * instance for binding with the driver. + * + * Returns 0 if the controller instance was successfully bound to the + * driver; otherwise, < 0 on error. + */ +static int ppc4xx_edac_probe(struct platform_device *op) +{ + int status = 0; + u32 mcopt1, memcheck; + dcr_host_t dcr_host; + const struct device_node *np = op->dev.of_node; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + static int ppc4xx_edac_instance; + + /* + * At this point, we only support the controller realized on + * the AMCC PPC 405EX[r]. Reject anything else. + */ + + if (!of_device_is_compatible(np, "ibm,sdram-405ex") && + !of_device_is_compatible(np, "ibm,sdram-405exr")) { + ppc4xx_edac_printk(KERN_NOTICE, + "Only the PPC405EX[r] is supported.\n"); + return -ENODEV; + } + + /* + * Next, get the DCR property and attempt to map it so that we + * can probe the controller. + */ + + status = ppc4xx_edac_map_dcrs(np, &dcr_host); + + if (status) + return status; + + /* + * First determine whether ECC is enabled at all. If not, + * there is no useful checking or monitoring that can be done + * for this controller. + */ + + mcopt1 = mfsdram(&dcr_host, SDRAM_MCOPT1); + memcheck = (mcopt1 & SDRAM_MCOPT1_MCHK_MASK); + + if (memcheck == SDRAM_MCOPT1_MCHK_NON) { + ppc4xx_edac_printk(KERN_INFO, "%pOF: No ECC memory detected or " + "ECC is disabled.\n", np); + status = -ENODEV; + goto done; + } + + /* + * At this point, we know ECC is enabled, allocate an EDAC + * controller instance and perform the appropriate + * initialization. + */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = ppc4xx_edac_nr_csrows; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = ppc4xx_edac_nr_chans; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(ppc4xx_edac_instance, ARRAY_SIZE(layers), layers, + sizeof(struct ppc4xx_edac_pdata)); + if (mci == NULL) { + ppc4xx_edac_printk(KERN_ERR, "%pOF: " + "Failed to allocate EDAC MC instance!\n", + np); + status = -ENOMEM; + goto done; + } + + status = ppc4xx_edac_mc_init(mci, op, &dcr_host, mcopt1); + + if (status) { + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Failed to initialize instance!\n"); + goto fail; + } + + /* + * We have a valid, initialized EDAC instance bound to the + * controller. Attempt to register it with the EDAC subsystem + * and, if necessary, register interrupts. + */ + + if (edac_mc_add_mc(mci)) { + ppc4xx_edac_mc_printk(KERN_ERR, mci, + "Failed to add instance!\n"); + status = -ENODEV; + goto fail; + } + + if (edac_op_state == EDAC_OPSTATE_INT) { + status = ppc4xx_edac_register_irq(op, mci); + + if (status) + goto fail1; + } + + ppc4xx_edac_instance++; + + return 0; + + fail1: + edac_mc_del_mc(mci->pdev); + + fail: + edac_mc_free(mci); + + done: + return status; +} + +/** + * ppc4xx_edac_remove - unbind driver from controller + * @op: A pointer to the OpenFirmware device tree node associated + * with the controller this EDAC instance is to be unbound/removed + * from. + * + * This routine unbinds the EDAC memory controller instance associated + * with the specified ibm,sdram-4xx-ddr2 controller described by the + * OpenFirmware device tree node passed as a parameter. + * + * Unconditionally returns 0. + */ +static int +ppc4xx_edac_remove(struct platform_device *op) +{ + struct mem_ctl_info *mci = dev_get_drvdata(&op->dev); + struct ppc4xx_edac_pdata *pdata = mci->pvt_info; + + if (edac_op_state == EDAC_OPSTATE_INT) { + free_irq(pdata->irqs.sec, mci); + free_irq(pdata->irqs.ded, mci); + } + + dcr_unmap(pdata->dcr_host, SDRAM_DCR_RESOURCE_LEN); + + edac_mc_del_mc(mci->pdev); + edac_mc_free(mci); + + return 0; +} + +/** + * ppc4xx_edac_opstate_init - initialize EDAC reporting method + * + * This routine ensures that the EDAC memory controller reporting + * method is mapped to a sane value as the EDAC core defines the value + * to EDAC_OPSTATE_INVAL by default. We don't call the global + * opstate_init as that defaults to polling and we want interrupt as + * the default. + */ +static inline void __init +ppc4xx_edac_opstate_init(void) +{ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + ppc4xx_edac_printk(KERN_INFO, "Reporting type: %s\n", + ((edac_op_state == EDAC_OPSTATE_POLL) ? + EDAC_OPSTATE_POLL_STR : + ((edac_op_state == EDAC_OPSTATE_INT) ? + EDAC_OPSTATE_INT_STR : + EDAC_OPSTATE_UNKNOWN_STR))); +} + +static struct platform_driver ppc4xx_edac_driver = { + .probe = ppc4xx_edac_probe, + .remove = ppc4xx_edac_remove, + .driver = { + .name = PPC4XX_EDAC_MODULE_NAME, + .of_match_table = ppc4xx_edac_match, + }, +}; + +/** + * ppc4xx_edac_init - driver/module insertion entry point + * + * This routine is the driver/module insertion entry point. It + * initializes the EDAC memory controller reporting state and + * registers the driver as an OpenFirmware device tree platform + * driver. + */ +static int __init +ppc4xx_edac_init(void) +{ + ppc4xx_edac_printk(KERN_INFO, PPC4XX_EDAC_MODULE_REVISION "\n"); + + ppc4xx_edac_opstate_init(); + + return platform_driver_register(&ppc4xx_edac_driver); +} + +/** + * ppc4xx_edac_exit - driver/module removal entry point + * + * This routine is the driver/module removal entry point. It + * unregisters the driver as an OpenFirmware device tree platform + * driver. + */ +static void __exit +ppc4xx_edac_exit(void) +{ + platform_driver_unregister(&ppc4xx_edac_driver); +} + +module_init(ppc4xx_edac_init); +module_exit(ppc4xx_edac_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Grant Erickson <gerickson@nuovations.com>"); +MODULE_DESCRIPTION("EDAC MC Driver for the PPC4xx IBM DDR2 Memory Controller"); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting State: " + "0=" EDAC_OPSTATE_POLL_STR ", 2=" EDAC_OPSTATE_INT_STR); diff --git a/drivers/edac/ppc4xx_edac.h b/drivers/edac/ppc4xx_edac.h new file mode 100644 index 000000000..b38459aa5 --- /dev/null +++ b/drivers/edac/ppc4xx_edac.h @@ -0,0 +1,167 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (c) 2008 Nuovation System Designs, LLC + * Grant Erickson <gerickson@nuovations.com> + * + * This file defines processor mnemonics for accessing and managing + * the IBM DDR1/DDR2 ECC controller found in the 405EX[r], 440SP, + * 440SPe, 460EX, 460GT and 460SX. + */ + +#ifndef __PPC4XX_EDAC_H +#define __PPC4XX_EDAC_H + +#include <linux/types.h> + +/* + * Macro for generating register field mnemonics + */ +#define PPC_REG_BITS 32 +#define PPC_REG_VAL(bit, val) ((val) << ((PPC_REG_BITS - 1) - (bit))) +#define PPC_REG_DECODE(bit, val) ((val) >> ((PPC_REG_BITS - 1) - (bit))) + +/* + * IBM 4xx DDR1/DDR2 SDRAM memory controller registers (at least those + * relevant to ECC) + */ +#define SDRAM_BESR 0x00 /* Error status (read/clear) */ +#define SDRAM_BESRT 0x01 /* Error statuss (test/set) */ +#define SDRAM_BEARL 0x02 /* Error address low */ +#define SDRAM_BEARH 0x03 /* Error address high */ +#define SDRAM_WMIRQ 0x06 /* Write master (read/clear) */ +#define SDRAM_WMIRQT 0x07 /* Write master (test/set) */ +#define SDRAM_MCOPT1 0x20 /* Controller options 1 */ +#define SDRAM_MBXCF_BASE 0x40 /* Bank n configuration base */ +#define SDRAM_MBXCF(n) (SDRAM_MBXCF_BASE + (4 * (n))) +#define SDRAM_MB0CF SDRAM_MBXCF(0) +#define SDRAM_MB1CF SDRAM_MBXCF(1) +#define SDRAM_MB2CF SDRAM_MBXCF(2) +#define SDRAM_MB3CF SDRAM_MBXCF(3) +#define SDRAM_ECCCR 0x98 /* ECC error status */ +#define SDRAM_ECCES SDRAM_ECCCR + +/* + * PLB Master IDs + */ +#define SDRAM_PLB_M0ID_FIRST 0 +#define SDRAM_PLB_M0ID_ICU SDRAM_PLB_M0ID_FIRST +#define SDRAM_PLB_M0ID_PCIE0 1 +#define SDRAM_PLB_M0ID_PCIE1 2 +#define SDRAM_PLB_M0ID_DMA 3 +#define SDRAM_PLB_M0ID_DCU 4 +#define SDRAM_PLB_M0ID_OPB 5 +#define SDRAM_PLB_M0ID_MAL 6 +#define SDRAM_PLB_M0ID_SEC 7 +#define SDRAM_PLB_M0ID_AHB 8 +#define SDRAM_PLB_M0ID_LAST SDRAM_PLB_M0ID_AHB +#define SDRAM_PLB_M0ID_COUNT (SDRAM_PLB_M0ID_LAST - \ + SDRAM_PLB_M0ID_FIRST + 1) + +/* + * Memory Controller Bus Error Status Register + */ +#define SDRAM_BESR_MASK PPC_REG_VAL(7, 0xFF) +#define SDRAM_BESR_M0ID_MASK PPC_REG_VAL(3, 0xF) +#define SDRAM_BESR_M0ID_DECODE(n) PPC_REG_DECODE(3, n) +#define SDRAM_BESR_M0ID_ICU PPC_REG_VAL(3, SDRAM_PLB_M0ID_ICU) +#define SDRAM_BESR_M0ID_PCIE0 PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE0) +#define SDRAM_BESR_M0ID_PCIE1 PPC_REG_VAL(3, SDRAM_PLB_M0ID_PCIE1) +#define SDRAM_BESR_M0ID_DMA PPC_REG_VAL(3, SDRAM_PLB_M0ID_DMA) +#define SDRAM_BESR_M0ID_DCU PPC_REG_VAL(3, SDRAM_PLB_M0ID_DCU) +#define SDRAM_BESR_M0ID_OPB PPC_REG_VAL(3, SDRAM_PLB_M0ID_OPB) +#define SDRAM_BESR_M0ID_MAL PPC_REG_VAL(3, SDRAM_PLB_M0ID_MAL) +#define SDRAM_BESR_M0ID_SEC PPC_REG_VAL(3, SDRAM_PLB_M0ID_SEC) +#define SDRAM_BESR_M0ID_AHB PPC_REG_VAL(3, SDRAM_PLB_M0ID_AHB) +#define SDRAM_BESR_M0ET_MASK PPC_REG_VAL(6, 0x7) +#define SDRAM_BESR_M0ET_NONE PPC_REG_VAL(6, 0) +#define SDRAM_BESR_M0ET_ECC PPC_REG_VAL(6, 1) +#define SDRAM_BESR_M0RW_MASK PPC_REG_VAL(7, 1) +#define SDRAM_BESR_M0RW_WRITE PPC_REG_VAL(7, 0) +#define SDRAM_BESR_M0RW_READ PPC_REG_VAL(7, 1) + +/* + * Memory Controller PLB Write Master Interrupt Register + */ +#define SDRAM_WMIRQ_MASK PPC_REG_VAL(8, 0x1FF) +#define SDRAM_WMIRQ_ENCODE(id) PPC_REG_VAL((id % \ + SDRAM_PLB_M0ID_COUNT), 1) +#define SDRAM_WMIRQ_ICU PPC_REG_VAL(SDRAM_PLB_M0ID_ICU, 1) +#define SDRAM_WMIRQ_PCIE0 PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE0, 1) +#define SDRAM_WMIRQ_PCIE1 PPC_REG_VAL(SDRAM_PLB_M0ID_PCIE1, 1) +#define SDRAM_WMIRQ_DMA PPC_REG_VAL(SDRAM_PLB_M0ID_DMA, 1) +#define SDRAM_WMIRQ_DCU PPC_REG_VAL(SDRAM_PLB_M0ID_DCU, 1) +#define SDRAM_WMIRQ_OPB PPC_REG_VAL(SDRAM_PLB_M0ID_OPB, 1) +#define SDRAM_WMIRQ_MAL PPC_REG_VAL(SDRAM_PLB_M0ID_MAL, 1) +#define SDRAM_WMIRQ_SEC PPC_REG_VAL(SDRAM_PLB_M0ID_SEC, 1) +#define SDRAM_WMIRQ_AHB PPC_REG_VAL(SDRAM_PLB_M0ID_AHB, 1) + +/* + * Memory Controller Options 1 Register + */ +#define SDRAM_MCOPT1_MCHK_MASK PPC_REG_VAL(3, 0x3) /* ECC mask */ +#define SDRAM_MCOPT1_MCHK_NON PPC_REG_VAL(3, 0x0) /* No ECC gen */ +#define SDRAM_MCOPT1_MCHK_GEN PPC_REG_VAL(3, 0x2) /* ECC gen */ +#define SDRAM_MCOPT1_MCHK_CHK PPC_REG_VAL(3, 0x1) /* ECC gen and chk */ +#define SDRAM_MCOPT1_MCHK_CHK_REP PPC_REG_VAL(3, 0x3) /* ECC gen/chk/rpt */ +#define SDRAM_MCOPT1_MCHK_DECODE(n) ((((u32)(n)) >> 28) & 0x3) +#define SDRAM_MCOPT1_RDEN_MASK PPC_REG_VAL(4, 0x1) /* Rgstrd DIMM mask */ +#define SDRAM_MCOPT1_RDEN PPC_REG_VAL(4, 0x1) /* Rgstrd DIMM enbl */ +#define SDRAM_MCOPT1_WDTH_MASK PPC_REG_VAL(7, 0x1) /* Width mask */ +#define SDRAM_MCOPT1_WDTH_32 PPC_REG_VAL(7, 0x0) /* 32 bits */ +#define SDRAM_MCOPT1_WDTH_16 PPC_REG_VAL(7, 0x1) /* 16 bits */ +#define SDRAM_MCOPT1_DDR_TYPE_MASK PPC_REG_VAL(11, 0x1) /* DDR type mask */ +#define SDRAM_MCOPT1_DDR1_TYPE PPC_REG_VAL(11, 0x0) /* DDR1 type */ +#define SDRAM_MCOPT1_DDR2_TYPE PPC_REG_VAL(11, 0x1) /* DDR2 type */ + +/* + * Memory Bank 0 - n Configuration Register + */ +#define SDRAM_MBCF_BA_MASK PPC_REG_VAL(12, 0x1FFF) +#define SDRAM_MBCF_SZ_MASK PPC_REG_VAL(19, 0xF) +#define SDRAM_MBCF_SZ_DECODE(mbxcf) PPC_REG_DECODE(19, mbxcf) +#define SDRAM_MBCF_SZ_4MB PPC_REG_VAL(19, 0x0) +#define SDRAM_MBCF_SZ_8MB PPC_REG_VAL(19, 0x1) +#define SDRAM_MBCF_SZ_16MB PPC_REG_VAL(19, 0x2) +#define SDRAM_MBCF_SZ_32MB PPC_REG_VAL(19, 0x3) +#define SDRAM_MBCF_SZ_64MB PPC_REG_VAL(19, 0x4) +#define SDRAM_MBCF_SZ_128MB PPC_REG_VAL(19, 0x5) +#define SDRAM_MBCF_SZ_256MB PPC_REG_VAL(19, 0x6) +#define SDRAM_MBCF_SZ_512MB PPC_REG_VAL(19, 0x7) +#define SDRAM_MBCF_SZ_1GB PPC_REG_VAL(19, 0x8) +#define SDRAM_MBCF_SZ_2GB PPC_REG_VAL(19, 0x9) +#define SDRAM_MBCF_SZ_4GB PPC_REG_VAL(19, 0xA) +#define SDRAM_MBCF_SZ_8GB PPC_REG_VAL(19, 0xB) +#define SDRAM_MBCF_AM_MASK PPC_REG_VAL(23, 0xF) +#define SDRAM_MBCF_AM_MODE0 PPC_REG_VAL(23, 0x0) +#define SDRAM_MBCF_AM_MODE1 PPC_REG_VAL(23, 0x1) +#define SDRAM_MBCF_AM_MODE2 PPC_REG_VAL(23, 0x2) +#define SDRAM_MBCF_AM_MODE3 PPC_REG_VAL(23, 0x3) +#define SDRAM_MBCF_AM_MODE4 PPC_REG_VAL(23, 0x4) +#define SDRAM_MBCF_AM_MODE5 PPC_REG_VAL(23, 0x5) +#define SDRAM_MBCF_AM_MODE6 PPC_REG_VAL(23, 0x6) +#define SDRAM_MBCF_AM_MODE7 PPC_REG_VAL(23, 0x7) +#define SDRAM_MBCF_AM_MODE8 PPC_REG_VAL(23, 0x8) +#define SDRAM_MBCF_AM_MODE9 PPC_REG_VAL(23, 0x9) +#define SDRAM_MBCF_BE_MASK PPC_REG_VAL(31, 0x1) +#define SDRAM_MBCF_BE_DISABLE PPC_REG_VAL(31, 0x0) +#define SDRAM_MBCF_BE_ENABLE PPC_REG_VAL(31, 0x1) + +/* + * ECC Error Status + */ +#define SDRAM_ECCES_MASK PPC_REG_VAL(21, 0x3FFFFF) +#define SDRAM_ECCES_BNCE_MASK PPC_REG_VAL(15, 0xFFFF) +#define SDRAM_ECCES_BNCE_ENCODE(lane) PPC_REG_VAL(((lane) & 0xF), 1) +#define SDRAM_ECCES_CKBER_MASK PPC_REG_VAL(17, 0x3) +#define SDRAM_ECCES_CKBER_NONE PPC_REG_VAL(17, 0) +#define SDRAM_ECCES_CKBER_16_ECC_0_3 PPC_REG_VAL(17, 2) +#define SDRAM_ECCES_CKBER_32_ECC_0_3 PPC_REG_VAL(17, 1) +#define SDRAM_ECCES_CKBER_32_ECC_4_8 PPC_REG_VAL(17, 2) +#define SDRAM_ECCES_CKBER_32_ECC_0_8 PPC_REG_VAL(17, 3) +#define SDRAM_ECCES_CE PPC_REG_VAL(18, 1) +#define SDRAM_ECCES_UE PPC_REG_VAL(19, 1) +#define SDRAM_ECCES_BKNER_MASK PPC_REG_VAL(21, 0x3) +#define SDRAM_ECCES_BK0ER PPC_REG_VAL(20, 1) +#define SDRAM_ECCES_BK1ER PPC_REG_VAL(21, 1) + +#endif /* __PPC4XX_EDAC_H */ diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c new file mode 100644 index 000000000..518092d7e --- /dev/null +++ b/drivers/edac/qcom_edac.c @@ -0,0 +1,413 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018, The Linux Foundation. All rights reserved. + */ + +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/soc/qcom/llcc-qcom.h> + +#include "edac_mc.h" +#include "edac_device.h" + +#define EDAC_LLCC "qcom_llcc" + +#define LLCC_ERP_PANIC_ON_UE 1 + +#define TRP_SYN_REG_CNT 6 +#define DRP_SYN_REG_CNT 8 + +#define LLCC_LB_CNT_MASK GENMASK(31, 28) +#define LLCC_LB_CNT_SHIFT 28 + +/* Mask and shift macros */ +#define ECC_DB_ERR_COUNT_MASK GENMASK(4, 0) +#define ECC_DB_ERR_WAYS_MASK GENMASK(31, 16) +#define ECC_DB_ERR_WAYS_SHIFT BIT(4) + +#define ECC_SB_ERR_COUNT_MASK GENMASK(23, 16) +#define ECC_SB_ERR_COUNT_SHIFT BIT(4) +#define ECC_SB_ERR_WAYS_MASK GENMASK(15, 0) + +#define SB_ECC_ERROR BIT(0) +#define DB_ECC_ERROR BIT(1) + +#define DRP_TRP_INT_CLEAR GENMASK(1, 0) +#define DRP_TRP_CNT_CLEAR GENMASK(1, 0) + +#define SB_ERROR_THRESHOLD 0x1 +#define SB_ERROR_THRESHOLD_SHIFT 24 +#define SB_DB_TRP_INTERRUPT_ENABLE 0x3 +#define TRP0_INTERRUPT_ENABLE 0x1 +#define DRP0_INTERRUPT_ENABLE BIT(6) +#define SB_DB_DRP_INTERRUPT_ENABLE 0x3 + +#define ECC_POLL_MSEC 5000 + +enum { + LLCC_DRAM_CE = 0, + LLCC_DRAM_UE, + LLCC_TRAM_CE, + LLCC_TRAM_UE, +}; + +static const struct llcc_edac_reg_data edac_reg_data[] = { + [LLCC_DRAM_CE] = { + .name = "DRAM Single-bit", + .reg_cnt = DRP_SYN_REG_CNT, + .count_mask = ECC_SB_ERR_COUNT_MASK, + .ways_mask = ECC_SB_ERR_WAYS_MASK, + .count_shift = ECC_SB_ERR_COUNT_SHIFT, + }, + [LLCC_DRAM_UE] = { + .name = "DRAM Double-bit", + .reg_cnt = DRP_SYN_REG_CNT, + .count_mask = ECC_DB_ERR_COUNT_MASK, + .ways_mask = ECC_DB_ERR_WAYS_MASK, + .ways_shift = ECC_DB_ERR_WAYS_SHIFT, + }, + [LLCC_TRAM_CE] = { + .name = "TRAM Single-bit", + .reg_cnt = TRP_SYN_REG_CNT, + .count_mask = ECC_SB_ERR_COUNT_MASK, + .ways_mask = ECC_SB_ERR_WAYS_MASK, + .count_shift = ECC_SB_ERR_COUNT_SHIFT, + }, + [LLCC_TRAM_UE] = { + .name = "TRAM Double-bit", + .reg_cnt = TRP_SYN_REG_CNT, + .count_mask = ECC_DB_ERR_COUNT_MASK, + .ways_mask = ECC_DB_ERR_WAYS_MASK, + .ways_shift = ECC_DB_ERR_WAYS_SHIFT, + }, +}; + +static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_bcast_regmap) +{ + u32 sb_err_threshold; + int ret; + + /* + * Configure interrupt enable registers such that Tag, Data RAM related + * interrupts are propagated to interrupt controller for servicing + */ + ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable, + TRP0_INTERRUPT_ENABLE, + TRP0_INTERRUPT_ENABLE); + if (ret) + return ret; + + ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->trp_interrupt_0_enable, + SB_DB_TRP_INTERRUPT_ENABLE, + SB_DB_TRP_INTERRUPT_ENABLE); + if (ret) + return ret; + + sb_err_threshold = (SB_ERROR_THRESHOLD << SB_ERROR_THRESHOLD_SHIFT); + ret = regmap_write(llcc_bcast_regmap, drv->edac_reg_offset->drp_ecc_error_cfg, + sb_err_threshold); + if (ret) + return ret; + + ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable, + DRP0_INTERRUPT_ENABLE, + DRP0_INTERRUPT_ENABLE); + if (ret) + return ret; + + ret = regmap_write(llcc_bcast_regmap, drv->edac_reg_offset->drp_interrupt_enable, + SB_DB_DRP_INTERRUPT_ENABLE); + return ret; +} + +/* Clear the error interrupt and counter registers */ +static int +qcom_llcc_clear_error_status(int err_type, struct llcc_drv_data *drv) +{ + int ret = 0; + + switch (err_type) { + case LLCC_DRAM_CE: + case LLCC_DRAM_UE: + ret = regmap_write(drv->bcast_regmap, + drv->edac_reg_offset->drp_interrupt_clear, + DRP_TRP_INT_CLEAR); + if (ret) + return ret; + + ret = regmap_write(drv->bcast_regmap, + drv->edac_reg_offset->drp_ecc_error_cntr_clear, + DRP_TRP_CNT_CLEAR); + if (ret) + return ret; + break; + case LLCC_TRAM_CE: + case LLCC_TRAM_UE: + ret = regmap_write(drv->bcast_regmap, + drv->edac_reg_offset->trp_interrupt_0_clear, + DRP_TRP_INT_CLEAR); + if (ret) + return ret; + + ret = regmap_write(drv->bcast_regmap, + drv->edac_reg_offset->trp_ecc_error_cntr_clear, + DRP_TRP_CNT_CLEAR); + if (ret) + return ret; + break; + default: + ret = -EINVAL; + edac_printk(KERN_CRIT, EDAC_LLCC, "Unexpected error type: %d\n", + err_type); + } + return ret; +} + +struct qcom_llcc_syn_regs { + u32 synd_reg; + u32 count_status_reg; + u32 ways_status_reg; +}; + +static void get_reg_offsets(struct llcc_drv_data *drv, int err_type, + struct qcom_llcc_syn_regs *syn_regs) +{ + const struct llcc_edac_reg_offset *edac_reg_offset = drv->edac_reg_offset; + + switch (err_type) { + case LLCC_DRAM_CE: + syn_regs->synd_reg = edac_reg_offset->drp_ecc_sb_err_syn0; + syn_regs->count_status_reg = edac_reg_offset->drp_ecc_error_status1; + syn_regs->ways_status_reg = edac_reg_offset->drp_ecc_error_status0; + break; + case LLCC_DRAM_UE: + syn_regs->synd_reg = edac_reg_offset->drp_ecc_db_err_syn0; + syn_regs->count_status_reg = edac_reg_offset->drp_ecc_error_status1; + syn_regs->ways_status_reg = edac_reg_offset->drp_ecc_error_status0; + break; + case LLCC_TRAM_CE: + syn_regs->synd_reg = edac_reg_offset->trp_ecc_sb_err_syn0; + syn_regs->count_status_reg = edac_reg_offset->trp_ecc_error_status1; + syn_regs->ways_status_reg = edac_reg_offset->trp_ecc_error_status0; + break; + case LLCC_TRAM_UE: + syn_regs->synd_reg = edac_reg_offset->trp_ecc_db_err_syn0; + syn_regs->count_status_reg = edac_reg_offset->trp_ecc_error_status1; + syn_regs->ways_status_reg = edac_reg_offset->trp_ecc_error_status0; + break; + } +} + +/* Dump Syndrome registers data for Tag RAM, Data RAM bit errors*/ +static int +dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) +{ + struct llcc_edac_reg_data reg_data = edac_reg_data[err_type]; + struct qcom_llcc_syn_regs regs = { }; + int err_cnt, err_ways, ret, i; + u32 synd_reg, synd_val; + + get_reg_offsets(drv, err_type, ®s); + + for (i = 0; i < reg_data.reg_cnt; i++) { + synd_reg = regs.synd_reg + (i * 4); + ret = regmap_read(drv->regmaps[bank], synd_reg, + &synd_val); + if (ret) + goto clear; + + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: ECC_SYN%d: 0x%8x\n", + reg_data.name, i, synd_val); + } + + ret = regmap_read(drv->regmaps[bank], regs.count_status_reg, + &err_cnt); + if (ret) + goto clear; + + err_cnt &= reg_data.count_mask; + err_cnt >>= reg_data.count_shift; + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", + reg_data.name, err_cnt); + + ret = regmap_read(drv->regmaps[bank], regs.ways_status_reg, + &err_ways); + if (ret) + goto clear; + + err_ways &= reg_data.ways_mask; + err_ways >>= reg_data.ways_shift; + + edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error ways: 0x%4x\n", + reg_data.name, err_ways); + +clear: + return qcom_llcc_clear_error_status(err_type, drv); +} + +static int +dump_syn_reg(struct edac_device_ctl_info *edev_ctl, int err_type, u32 bank) +{ + struct llcc_drv_data *drv = edev_ctl->dev->platform_data; + int ret; + + ret = dump_syn_reg_values(drv, bank, err_type); + if (ret) + return ret; + + switch (err_type) { + case LLCC_DRAM_CE: + edac_device_handle_ce(edev_ctl, 0, bank, + "LLCC Data RAM correctable Error"); + break; + case LLCC_DRAM_UE: + edac_device_handle_ue(edev_ctl, 0, bank, + "LLCC Data RAM uncorrectable Error"); + break; + case LLCC_TRAM_CE: + edac_device_handle_ce(edev_ctl, 0, bank, + "LLCC Tag RAM correctable Error"); + break; + case LLCC_TRAM_UE: + edac_device_handle_ue(edev_ctl, 0, bank, + "LLCC Tag RAM uncorrectable Error"); + break; + default: + ret = -EINVAL; + edac_printk(KERN_CRIT, EDAC_LLCC, "Unexpected error type: %d\n", + err_type); + } + + return ret; +} + +static irqreturn_t llcc_ecc_irq_handler(int irq, void *edev_ctl) +{ + struct edac_device_ctl_info *edac_dev_ctl = edev_ctl; + struct llcc_drv_data *drv = edac_dev_ctl->dev->platform_data; + irqreturn_t irq_rc = IRQ_NONE; + u32 drp_error, trp_error, i; + int ret; + + /* Iterate over the banks and look for Tag RAM or Data RAM errors */ + for (i = 0; i < drv->num_banks; i++) { + ret = regmap_read(drv->regmaps[i], drv->edac_reg_offset->drp_interrupt_status, + &drp_error); + + if (!ret && (drp_error & SB_ECC_ERROR)) { + edac_printk(KERN_CRIT, EDAC_LLCC, + "Single Bit Error detected in Data RAM\n"); + ret = dump_syn_reg(edev_ctl, LLCC_DRAM_CE, i); + } else if (!ret && (drp_error & DB_ECC_ERROR)) { + edac_printk(KERN_CRIT, EDAC_LLCC, + "Double Bit Error detected in Data RAM\n"); + ret = dump_syn_reg(edev_ctl, LLCC_DRAM_UE, i); + } + if (!ret) + irq_rc = IRQ_HANDLED; + + ret = regmap_read(drv->regmaps[i], drv->edac_reg_offset->trp_interrupt_0_status, + &trp_error); + + if (!ret && (trp_error & SB_ECC_ERROR)) { + edac_printk(KERN_CRIT, EDAC_LLCC, + "Single Bit Error detected in Tag RAM\n"); + ret = dump_syn_reg(edev_ctl, LLCC_TRAM_CE, i); + } else if (!ret && (trp_error & DB_ECC_ERROR)) { + edac_printk(KERN_CRIT, EDAC_LLCC, + "Double Bit Error detected in Tag RAM\n"); + ret = dump_syn_reg(edev_ctl, LLCC_TRAM_UE, i); + } + if (!ret) + irq_rc = IRQ_HANDLED; + } + + return irq_rc; +} + +static void llcc_ecc_check(struct edac_device_ctl_info *edev_ctl) +{ + llcc_ecc_irq_handler(0, edev_ctl); +} + +static int qcom_llcc_edac_probe(struct platform_device *pdev) +{ + struct llcc_drv_data *llcc_driv_data = pdev->dev.platform_data; + struct edac_device_ctl_info *edev_ctl; + struct device *dev = &pdev->dev; + int ecc_irq; + int rc; + + rc = qcom_llcc_core_setup(llcc_driv_data, llcc_driv_data->bcast_regmap); + if (rc) + return rc; + + /* Allocate edac control info */ + edev_ctl = edac_device_alloc_ctl_info(0, "qcom-llcc", 1, "bank", + llcc_driv_data->num_banks, 1, + NULL, 0, + edac_device_alloc_index()); + + if (!edev_ctl) + return -ENOMEM; + + edev_ctl->dev = dev; + edev_ctl->mod_name = dev_name(dev); + edev_ctl->dev_name = dev_name(dev); + edev_ctl->ctl_name = "llcc"; + edev_ctl->panic_on_ue = LLCC_ERP_PANIC_ON_UE; + + /* Check if LLCC driver has passed ECC IRQ */ + ecc_irq = llcc_driv_data->ecc_irq; + if (ecc_irq > 0) { + /* Use interrupt mode if IRQ is available */ + rc = devm_request_irq(dev, ecc_irq, llcc_ecc_irq_handler, + IRQF_TRIGGER_HIGH, "llcc_ecc", edev_ctl); + if (!rc) { + edac_op_state = EDAC_OPSTATE_INT; + goto irq_done; + } + } + + /* Fall back to polling mode otherwise */ + edev_ctl->poll_msec = ECC_POLL_MSEC; + edev_ctl->edac_check = llcc_ecc_check; + edac_op_state = EDAC_OPSTATE_POLL; + +irq_done: + rc = edac_device_add_device(edev_ctl); + if (rc) { + edac_device_free_ctl_info(edev_ctl); + return rc; + } + + platform_set_drvdata(pdev, edev_ctl); + + return rc; +} + +static int qcom_llcc_edac_remove(struct platform_device *pdev) +{ + struct edac_device_ctl_info *edev_ctl = dev_get_drvdata(&pdev->dev); + + edac_device_del_device(edev_ctl->dev); + edac_device_free_ctl_info(edev_ctl); + + return 0; +} + +static struct platform_driver qcom_llcc_edac_driver = { + .probe = qcom_llcc_edac_probe, + .remove = qcom_llcc_edac_remove, + .driver = { + .name = "qcom_llcc_edac", + }, +}; +module_platform_driver(qcom_llcc_edac_driver); + +MODULE_DESCRIPTION("QCOM EDAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c new file mode 100644 index 000000000..d0aef83dc --- /dev/null +++ b/drivers/edac/r82600_edac.c @@ -0,0 +1,427 @@ +/* + * Radisys 82600 Embedded chipset Memory Controller kernel module + * (C) 2005 EADS Astrium + * This file may be distributed under the terms of the + * GNU General Public License. + * + * Written by Tim Small <tim@buttersideup.com>, based on work by Thayne + * Harbaugh, Dan Hollis <goemon at anime dot net> and others. + * + * $Id: edac_r82600.c,v 1.1.2.6 2005/10/05 00:43:44 dsp_llnl Exp $ + * + * Written with reference to 82600 High Integration Dual PCI System + * Controller Data Book: + * www.radisys.com/files/support_downloads/007-01277-0002.82600DataBook.pdf + * references to this document given in [] + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "r82600_edac" + +#define r82600_printk(level, fmt, arg...) \ + edac_printk(level, "r82600", fmt, ##arg) + +#define r82600_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "r82600", fmt, ##arg) + +/* Radisys say "The 82600 integrates a main memory SDRAM controller that + * supports up to four banks of memory. The four banks can support a mix of + * sizes of 64 bit wide (72 bits with ECC) Synchronous DRAM (SDRAM) DIMMs, + * each of which can be any size from 16MB to 512MB. Both registered (control + * signals buffered) and unbuffered DIMM types are supported. Mixing of + * registered and unbuffered DIMMs as well as mixing of ECC and non-ECC DIMMs + * is not allowed. The 82600 SDRAM interface operates at the same frequency as + * the CPU bus, 66MHz, 100MHz or 133MHz." + */ + +#define R82600_NR_CSROWS 4 +#define R82600_NR_CHANS 1 +#define R82600_NR_DIMMS 4 + +#define R82600_BRIDGE_ID 0x8200 + +/* Radisys 82600 register addresses - device 0 function 0 - PCI bridge */ +#define R82600_DRAMC 0x57 /* Various SDRAM related control bits + * all bits are R/W + * + * 7 SDRAM ISA Hole Enable + * 6 Flash Page Mode Enable + * 5 ECC Enable: 1=ECC 0=noECC + * 4 DRAM DIMM Type: 1= + * 3 BIOS Alias Disable + * 2 SDRAM BIOS Flash Write Enable + * 1:0 SDRAM Refresh Rate: 00=Disabled + * 01=7.8usec (256Mbit SDRAMs) + * 10=15.6us 11=125usec + */ + +#define R82600_SDRAMC 0x76 /* "SDRAM Control Register" + * More SDRAM related control bits + * all bits are R/W + * + * 15:8 Reserved. + * + * 7:5 Special SDRAM Mode Select + * + * 4 Force ECC + * + * 1=Drive ECC bits to 0 during + * write cycles (i.e. ECC test mode) + * + * 0=Normal ECC functioning + * + * 3 Enhanced Paging Enable + * + * 2 CAS# Latency 0=3clks 1=2clks + * + * 1 RAS# to CAS# Delay 0=3 1=2 + * + * 0 RAS# Precharge 0=3 1=2 + */ + +#define R82600_EAP 0x80 /* ECC Error Address Pointer Register + * + * 31 Disable Hardware Scrubbing (RW) + * 0=Scrub on corrected read + * 1=Don't scrub on corrected read + * + * 30:12 Error Address Pointer (RO) + * Upper 19 bits of error address + * + * 11:4 Syndrome Bits (RO) + * + * 3 BSERR# on multibit error (RW) + * 1=enable 0=disable + * + * 2 NMI on Single Bit Eror (RW) + * 1=NMI triggered by SBE n.b. other + * prerequeists + * 0=NMI not triggered + * + * 1 MBE (R/WC) + * read 1=MBE at EAP (see above) + * read 0=no MBE, or SBE occurred first + * write 1=Clear MBE status (must also + * clear SBE) + * write 0=NOP + * + * 1 SBE (R/WC) + * read 1=SBE at EAP (see above) + * read 0=no SBE, or MBE occurred first + * write 1=Clear SBE status (must also + * clear MBE) + * write 0=NOP + */ + +#define R82600_DRBA 0x60 /* + 0x60..0x63 SDRAM Row Boundary Address + * Registers + * + * 7:0 Address lines 30:24 - upper limit of + * each row [p57] + */ + +struct r82600_error_info { + u32 eapr; +}; + +static bool disable_hardware_scrub; + +static struct edac_pci_ctl_info *r82600_pci; + +static void r82600_get_error_info(struct mem_ctl_info *mci, + struct r82600_error_info *info) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + pci_read_config_dword(pdev, R82600_EAP, &info->eapr); + + if (info->eapr & BIT(0)) + /* Clear error to allow next error to be reported [p.62] */ + pci_write_bits32(pdev, R82600_EAP, + ((u32) BIT(0) & (u32) BIT(1)), + ((u32) BIT(0) & (u32) BIT(1))); + + if (info->eapr & BIT(1)) + /* Clear error to allow next error to be reported [p.62] */ + pci_write_bits32(pdev, R82600_EAP, + ((u32) BIT(0) & (u32) BIT(1)), + ((u32) BIT(0) & (u32) BIT(1))); +} + +static int r82600_process_error_info(struct mem_ctl_info *mci, + struct r82600_error_info *info, + int handle_errors) +{ + int error_found; + u32 eapaddr, page; + u32 syndrome; + + error_found = 0; + + /* bits 30:12 store the upper 19 bits of the 32 bit error address */ + eapaddr = ((info->eapr >> 12) & 0x7FFF) << 13; + /* Syndrome in bits 11:4 [p.62] */ + syndrome = (info->eapr >> 4) & 0xFF; + + /* the R82600 reports at less than page * + * granularity (upper 19 bits only) */ + page = eapaddr >> PAGE_SHIFT; + + if (info->eapr & BIT(0)) { /* CE? */ + error_found = 1; + + if (handle_errors) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + page, 0, syndrome, + edac_mc_find_csrow_by_page(mci, page), + 0, -1, + mci->ctl_name, ""); + } + + if (info->eapr & BIT(1)) { /* UE? */ + error_found = 1; + + if (handle_errors) + /* 82600 doesn't give enough info */ + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + page, 0, 0, + edac_mc_find_csrow_by_page(mci, page), + 0, -1, + mci->ctl_name, ""); + } + + return error_found; +} + +static void r82600_check(struct mem_ctl_info *mci) +{ + struct r82600_error_info info; + + r82600_get_error_info(mci, &info); + r82600_process_error_info(mci, &info, 1); +} + +static inline int ecc_enabled(u8 dramcr) +{ + return dramcr & BIT(5); +} + +static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, + u8 dramcr) +{ + struct csrow_info *csrow; + struct dimm_info *dimm; + int index; + u8 drbar; /* SDRAM Row Boundary Address Register */ + u32 row_high_limit, row_high_limit_last; + u32 reg_sdram, ecc_on, row_base; + + ecc_on = ecc_enabled(dramcr); + reg_sdram = dramcr & BIT(4); + row_high_limit_last = 0; + + for (index = 0; index < mci->nr_csrows; index++) { + csrow = mci->csrows[index]; + dimm = csrow->channels[0]->dimm; + + /* find the DRAM Chip Select Base address and mask */ + pci_read_config_byte(pdev, R82600_DRBA + index, &drbar); + + edac_dbg(1, "Row=%d DRBA = %#0x\n", index, drbar); + + row_high_limit = ((u32) drbar << 24); +/* row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */ + + edac_dbg(1, "Row=%d, Boundary Address=%#0x, Last = %#0x\n", + index, row_high_limit, row_high_limit_last); + + /* Empty row [p.57] */ + if (row_high_limit == row_high_limit_last) + continue; + + row_base = row_high_limit_last; + + csrow->first_page = row_base >> PAGE_SHIFT; + csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1; + + dimm->nr_pages = csrow->last_page - csrow->first_page + 1; + /* Error address is top 19 bits - so granularity is * + * 14 bits */ + dimm->grain = 1 << 14; + dimm->mtype = reg_sdram ? MEM_RDDR : MEM_DDR; + /* FIXME - check that this is unknowable with this chipset */ + dimm->dtype = DEV_UNKNOWN; + + /* Mode is global on 82600 */ + dimm->edac_mode = ecc_on ? EDAC_SECDED : EDAC_NONE; + row_high_limit_last = row_high_limit; + } +} + +static int r82600_probe1(struct pci_dev *pdev, int dev_idx) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + u8 dramcr; + u32 eapr; + u32 scrub_disabled; + u32 sdram_refresh_rate; + struct r82600_error_info discard; + + edac_dbg(0, "\n"); + pci_read_config_byte(pdev, R82600_DRAMC, &dramcr); + pci_read_config_dword(pdev, R82600_EAP, &eapr); + scrub_disabled = eapr & BIT(31); + sdram_refresh_rate = dramcr & (BIT(0) | BIT(1)); + edac_dbg(2, "sdram refresh rate = %#0x\n", sdram_refresh_rate); + edac_dbg(2, "DRAMC register = %#0x\n", dramcr); + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = R82600_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = R82600_NR_CHANS; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "mci = %p\n", mci); + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + /* FIXME try to work out if the chip leads have been used for COM2 + * instead on this board? [MA6?] MAYBE: + */ + + /* On the R82600, the pins for memory bits 72:65 - i.e. the * + * EC bits are shared with the pins for COM2 (!), so if COM2 * + * is enabled, we assume COM2 is wired up, and thus no EDAC * + * is possible. */ + mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED; + + if (ecc_enabled(dramcr)) { + if (scrub_disabled) + edac_dbg(3, "mci = %p - Scrubbing disabled! EAP: %#0x\n", + mci, eapr); + } else + mci->edac_cap = EDAC_FLAG_NONE; + + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = "R82600"; + mci->dev_name = pci_name(pdev); + mci->edac_check = r82600_check; + mci->ctl_page_to_phys = NULL; + r82600_init_csrows(mci, pdev, dramcr); + r82600_get_error_info(mci, &discard); /* clear counters */ + + /* Here we assume that we will never see multiple instances of this + * type of memory controller. The ID is therefore hardcoded to 0. + */ + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "failed edac_mc_add_mc()\n"); + goto fail; + } + + /* get this far and it's successful */ + + if (disable_hardware_scrub) { + edac_dbg(3, "Disabling Hardware Scrub (scrub on error)\n"); + pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31)); + } + + /* allocating generic PCI control info */ + r82600_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR); + if (!r82600_pci) { + printk(KERN_WARNING + "%s(): Unable to create PCI control\n", + __func__); + printk(KERN_WARNING + "%s(): PCI error report via EDAC not setup\n", + __func__); + } + + edac_dbg(3, "success\n"); + return 0; + +fail: + edac_mc_free(mci); + return -ENODEV; +} + +/* returns count (>= 0), or negative on error */ +static int r82600_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + edac_dbg(0, "\n"); + + /* don't need to call pci_enable_device() */ + return r82600_probe1(pdev, ent->driver_data); +} + +static void r82600_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + if (r82600_pci) + edac_pci_release_generic_ctl(r82600_pci); + + if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) + return; + + edac_mc_free(mci); +} + +static const struct pci_device_id r82600_pci_tbl[] = { + { + PCI_DEVICE(PCI_VENDOR_ID_RADISYS, R82600_BRIDGE_ID) + }, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, r82600_pci_tbl); + +static struct pci_driver r82600_driver = { + .name = EDAC_MOD_STR, + .probe = r82600_init_one, + .remove = r82600_remove_one, + .id_table = r82600_pci_tbl, +}; + +static int __init r82600_init(void) +{ + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + return pci_register_driver(&r82600_driver); +} + +static void __exit r82600_exit(void) +{ + pci_unregister_driver(&r82600_driver); +} + +module_init(r82600_init); +module_exit(r82600_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD Ltd. " + "on behalf of EADS Astrium"); +MODULE_DESCRIPTION("MC support for Radisys 82600 memory controllers"); + +module_param(disable_hardware_scrub, bool, 0644); +MODULE_PARM_DESC(disable_hardware_scrub, + "If set, disable the chipset's automatic scrub for CEs"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c new file mode 100644 index 000000000..8e39370fd --- /dev/null +++ b/drivers/edac/sb_edac.c @@ -0,0 +1,3685 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Intel Sandy Bridge -EN/-EP/-EX Memory Controller kernel module + * + * This driver supports the memory controllers found on the Intel + * processor family Sandy Bridge. + * + * Copyright (c) 2011 by: + * Mauro Carvalho Chehab + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/edac.h> +#include <linux/mmzone.h> +#include <linux/smp.h> +#include <linux/bitmap.h> +#include <linux/math64.h> +#include <linux/mod_devicetable.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/processor.h> +#include <asm/mce.h> + +#include "edac_module.h" + +/* Static vars */ +static LIST_HEAD(sbridge_edac_list); + +/* + * Alter this version for the module when modifications are made + */ +#define SBRIDGE_REVISION " Ver: 1.1.2 " +#define EDAC_MOD_STR "sb_edac" + +/* + * Debug macros + */ +#define sbridge_printk(level, fmt, arg...) \ + edac_printk(level, "sbridge", fmt, ##arg) + +#define sbridge_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "sbridge", fmt, ##arg) + +/* + * Get a bit field at register value <v>, from bit <lo> to bit <hi> + */ +#define GET_BITFIELD(v, lo, hi) \ + (((v) & GENMASK_ULL(hi, lo)) >> (lo)) + +/* Devices 12 Function 6, Offsets 0x80 to 0xcc */ +static const u32 sbridge_dram_rule[] = { + 0x80, 0x88, 0x90, 0x98, 0xa0, + 0xa8, 0xb0, 0xb8, 0xc0, 0xc8, +}; + +static const u32 ibridge_dram_rule[] = { + 0x60, 0x68, 0x70, 0x78, 0x80, + 0x88, 0x90, 0x98, 0xa0, 0xa8, + 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, + 0xd8, 0xe0, 0xe8, 0xf0, 0xf8, +}; + +static const u32 knl_dram_rule[] = { + 0x60, 0x68, 0x70, 0x78, 0x80, /* 0-4 */ + 0x88, 0x90, 0x98, 0xa0, 0xa8, /* 5-9 */ + 0xb0, 0xb8, 0xc0, 0xc8, 0xd0, /* 10-14 */ + 0xd8, 0xe0, 0xe8, 0xf0, 0xf8, /* 15-19 */ + 0x100, 0x108, 0x110, 0x118, /* 20-23 */ +}; + +#define DRAM_RULE_ENABLE(reg) GET_BITFIELD(reg, 0, 0) +#define A7MODE(reg) GET_BITFIELD(reg, 26, 26) + +static char *show_dram_attr(u32 attr) +{ + switch (attr) { + case 0: + return "DRAM"; + case 1: + return "MMCFG"; + case 2: + return "NXM"; + default: + return "unknown"; + } +} + +static const u32 sbridge_interleave_list[] = { + 0x84, 0x8c, 0x94, 0x9c, 0xa4, + 0xac, 0xb4, 0xbc, 0xc4, 0xcc, +}; + +static const u32 ibridge_interleave_list[] = { + 0x64, 0x6c, 0x74, 0x7c, 0x84, + 0x8c, 0x94, 0x9c, 0xa4, 0xac, + 0xb4, 0xbc, 0xc4, 0xcc, 0xd4, + 0xdc, 0xe4, 0xec, 0xf4, 0xfc, +}; + +static const u32 knl_interleave_list[] = { + 0x64, 0x6c, 0x74, 0x7c, 0x84, /* 0-4 */ + 0x8c, 0x94, 0x9c, 0xa4, 0xac, /* 5-9 */ + 0xb4, 0xbc, 0xc4, 0xcc, 0xd4, /* 10-14 */ + 0xdc, 0xe4, 0xec, 0xf4, 0xfc, /* 15-19 */ + 0x104, 0x10c, 0x114, 0x11c, /* 20-23 */ +}; +#define MAX_INTERLEAVE \ + (max_t(unsigned int, ARRAY_SIZE(sbridge_interleave_list), \ + max_t(unsigned int, ARRAY_SIZE(ibridge_interleave_list), \ + ARRAY_SIZE(knl_interleave_list)))) + +struct interleave_pkg { + unsigned char start; + unsigned char end; +}; + +static const struct interleave_pkg sbridge_interleave_pkg[] = { + { 0, 2 }, + { 3, 5 }, + { 8, 10 }, + { 11, 13 }, + { 16, 18 }, + { 19, 21 }, + { 24, 26 }, + { 27, 29 }, +}; + +static const struct interleave_pkg ibridge_interleave_pkg[] = { + { 0, 3 }, + { 4, 7 }, + { 8, 11 }, + { 12, 15 }, + { 16, 19 }, + { 20, 23 }, + { 24, 27 }, + { 28, 31 }, +}; + +static inline int sad_pkg(const struct interleave_pkg *table, u32 reg, + int interleave) +{ + return GET_BITFIELD(reg, table[interleave].start, + table[interleave].end); +} + +/* Devices 12 Function 7 */ + +#define TOLM 0x80 +#define TOHM 0x84 +#define HASWELL_TOLM 0xd0 +#define HASWELL_TOHM_0 0xd4 +#define HASWELL_TOHM_1 0xd8 +#define KNL_TOLM 0xd0 +#define KNL_TOHM_0 0xd4 +#define KNL_TOHM_1 0xd8 + +#define GET_TOLM(reg) ((GET_BITFIELD(reg, 0, 3) << 28) | 0x3ffffff) +#define GET_TOHM(reg) ((GET_BITFIELD(reg, 0, 20) << 25) | 0x3ffffff) + +/* Device 13 Function 6 */ + +#define SAD_TARGET 0xf0 + +#define SOURCE_ID(reg) GET_BITFIELD(reg, 9, 11) + +#define SOURCE_ID_KNL(reg) GET_BITFIELD(reg, 12, 14) + +#define SAD_CONTROL 0xf4 + +/* Device 14 function 0 */ + +static const u32 tad_dram_rule[] = { + 0x40, 0x44, 0x48, 0x4c, + 0x50, 0x54, 0x58, 0x5c, + 0x60, 0x64, 0x68, 0x6c, +}; +#define MAX_TAD ARRAY_SIZE(tad_dram_rule) + +#define TAD_LIMIT(reg) ((GET_BITFIELD(reg, 12, 31) << 26) | 0x3ffffff) +#define TAD_SOCK(reg) GET_BITFIELD(reg, 10, 11) +#define TAD_CH(reg) GET_BITFIELD(reg, 8, 9) +#define TAD_TGT3(reg) GET_BITFIELD(reg, 6, 7) +#define TAD_TGT2(reg) GET_BITFIELD(reg, 4, 5) +#define TAD_TGT1(reg) GET_BITFIELD(reg, 2, 3) +#define TAD_TGT0(reg) GET_BITFIELD(reg, 0, 1) + +/* Device 15, function 0 */ + +#define MCMTR 0x7c +#define KNL_MCMTR 0x624 + +#define IS_ECC_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 2, 2) +#define IS_LOCKSTEP_ENABLED(mcmtr) GET_BITFIELD(mcmtr, 1, 1) +#define IS_CLOSE_PG(mcmtr) GET_BITFIELD(mcmtr, 0, 0) + +/* Device 15, function 1 */ + +#define RASENABLES 0xac +#define IS_MIRROR_ENABLED(reg) GET_BITFIELD(reg, 0, 0) + +/* Device 15, functions 2-5 */ + +static const int mtr_regs[] = { + 0x80, 0x84, 0x88, +}; + +static const int knl_mtr_reg = 0xb60; + +#define RANK_DISABLE(mtr) GET_BITFIELD(mtr, 16, 19) +#define IS_DIMM_PRESENT(mtr) GET_BITFIELD(mtr, 14, 14) +#define RANK_CNT_BITS(mtr) GET_BITFIELD(mtr, 12, 13) +#define RANK_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 2, 4) +#define COL_WIDTH_BITS(mtr) GET_BITFIELD(mtr, 0, 1) + +static const u32 tad_ch_nilv_offset[] = { + 0x90, 0x94, 0x98, 0x9c, + 0xa0, 0xa4, 0xa8, 0xac, + 0xb0, 0xb4, 0xb8, 0xbc, +}; +#define CHN_IDX_OFFSET(reg) GET_BITFIELD(reg, 28, 29) +#define TAD_OFFSET(reg) (GET_BITFIELD(reg, 6, 25) << 26) + +static const u32 rir_way_limit[] = { + 0x108, 0x10c, 0x110, 0x114, 0x118, +}; +#define MAX_RIR_RANGES ARRAY_SIZE(rir_way_limit) + +#define IS_RIR_VALID(reg) GET_BITFIELD(reg, 31, 31) +#define RIR_WAY(reg) GET_BITFIELD(reg, 28, 29) + +#define MAX_RIR_WAY 8 + +static const u32 rir_offset[MAX_RIR_RANGES][MAX_RIR_WAY] = { + { 0x120, 0x124, 0x128, 0x12c, 0x130, 0x134, 0x138, 0x13c }, + { 0x140, 0x144, 0x148, 0x14c, 0x150, 0x154, 0x158, 0x15c }, + { 0x160, 0x164, 0x168, 0x16c, 0x170, 0x174, 0x178, 0x17c }, + { 0x180, 0x184, 0x188, 0x18c, 0x190, 0x194, 0x198, 0x19c }, + { 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc }, +}; + +#define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \ + GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19)) + +#define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \ + GET_BITFIELD(reg, 2, 15) : GET_BITFIELD(reg, 2, 14)) + +/* Device 16, functions 2-7 */ + +/* + * FIXME: Implement the error count reads directly + */ + +#define RANK_ODD_OV(reg) GET_BITFIELD(reg, 31, 31) +#define RANK_ODD_ERR_CNT(reg) GET_BITFIELD(reg, 16, 30) +#define RANK_EVEN_OV(reg) GET_BITFIELD(reg, 15, 15) +#define RANK_EVEN_ERR_CNT(reg) GET_BITFIELD(reg, 0, 14) + +#if 0 /* Currently unused*/ +static const u32 correrrcnt[] = { + 0x104, 0x108, 0x10c, 0x110, +}; + +static const u32 correrrthrsld[] = { + 0x11c, 0x120, 0x124, 0x128, +}; +#endif + +#define RANK_ODD_ERR_THRSLD(reg) GET_BITFIELD(reg, 16, 30) +#define RANK_EVEN_ERR_THRSLD(reg) GET_BITFIELD(reg, 0, 14) + + +/* Device 17, function 0 */ + +#define SB_RANK_CFG_A 0x0328 + +#define IB_RANK_CFG_A 0x0320 + +/* + * sbridge structs + */ + +#define NUM_CHANNELS 6 /* Max channels per MC */ +#define MAX_DIMMS 3 /* Max DIMMS per channel */ +#define KNL_MAX_CHAS 38 /* KNL max num. of Cache Home Agents */ +#define KNL_MAX_CHANNELS 6 /* KNL max num. of PCI channels */ +#define KNL_MAX_EDCS 8 /* Embedded DRAM controllers */ +#define CHANNEL_UNSPECIFIED 0xf /* Intel IA32 SDM 15-14 */ + +enum type { + SANDY_BRIDGE, + IVY_BRIDGE, + HASWELL, + BROADWELL, + KNIGHTS_LANDING, +}; + +enum domain { + IMC0 = 0, + IMC1, + SOCK, +}; + +enum mirroring_mode { + NON_MIRRORING, + ADDR_RANGE_MIRRORING, + FULL_MIRRORING, +}; + +struct sbridge_pvt; +struct sbridge_info { + enum type type; + u32 mcmtr; + u32 rankcfgr; + u64 (*get_tolm)(struct sbridge_pvt *pvt); + u64 (*get_tohm)(struct sbridge_pvt *pvt); + u64 (*rir_limit)(u32 reg); + u64 (*sad_limit)(u32 reg); + u32 (*interleave_mode)(u32 reg); + u32 (*dram_attr)(u32 reg); + const u32 *dram_rule; + const u32 *interleave_list; + const struct interleave_pkg *interleave_pkg; + u8 max_sad; + u8 (*get_node_id)(struct sbridge_pvt *pvt); + u8 (*get_ha)(u8 bank); + enum mem_type (*get_memory_type)(struct sbridge_pvt *pvt); + enum dev_type (*get_width)(struct sbridge_pvt *pvt, u32 mtr); + struct pci_dev *pci_vtd; +}; + +struct sbridge_channel { + u32 ranks; + u32 dimms; + struct dimm { + u32 rowbits; + u32 colbits; + u32 bank_xor_enable; + u32 amap_fine; + } dimm[MAX_DIMMS]; +}; + +struct pci_id_descr { + int dev_id; + int optional; + enum domain dom; +}; + +struct pci_id_table { + const struct pci_id_descr *descr; + int n_devs_per_imc; + int n_devs_per_sock; + int n_imcs_per_sock; + enum type type; +}; + +struct sbridge_dev { + struct list_head list; + int seg; + u8 bus, mc; + u8 node_id, source_id; + struct pci_dev **pdev; + enum domain dom; + int n_devs; + int i_devs; + struct mem_ctl_info *mci; +}; + +struct knl_pvt { + struct pci_dev *pci_cha[KNL_MAX_CHAS]; + struct pci_dev *pci_channel[KNL_MAX_CHANNELS]; + struct pci_dev *pci_mc0; + struct pci_dev *pci_mc1; + struct pci_dev *pci_mc0_misc; + struct pci_dev *pci_mc1_misc; + struct pci_dev *pci_mc_info; /* tolm, tohm */ +}; + +struct sbridge_pvt { + /* Devices per socket */ + struct pci_dev *pci_ddrio; + struct pci_dev *pci_sad0, *pci_sad1; + struct pci_dev *pci_br0, *pci_br1; + /* Devices per memory controller */ + struct pci_dev *pci_ha, *pci_ta, *pci_ras; + struct pci_dev *pci_tad[NUM_CHANNELS]; + + struct sbridge_dev *sbridge_dev; + + struct sbridge_info info; + struct sbridge_channel channel[NUM_CHANNELS]; + + /* Memory type detection */ + bool is_cur_addr_mirrored, is_lockstep, is_close_pg; + bool is_chan_hash; + enum mirroring_mode mirror_mode; + + /* Memory description */ + u64 tolm, tohm; + struct knl_pvt knl; +}; + +#define PCI_DESCR(device_id, opt, domain) \ + .dev_id = (device_id), \ + .optional = opt, \ + .dom = domain + +static const struct pci_id_descr pci_dev_descr_sbridge[] = { + /* Processor Home Agent */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0, 0, IMC0) }, + + /* Memory controller */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO, 1, SOCK) }, + + /* System Address Decoder */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0, 0, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1, 0, SOCK) }, + + /* Broadcast Registers */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0, SOCK) }, +}; + +#define PCI_ID_TABLE_ENTRY(A, N, M, T) { \ + .descr = A, \ + .n_devs_per_imc = N, \ + .n_devs_per_sock = ARRAY_SIZE(A), \ + .n_imcs_per_sock = M, \ + .type = T \ +} + +static const struct pci_id_table pci_dev_descr_sbridge_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, ARRAY_SIZE(pci_dev_descr_sbridge), 1, SANDY_BRIDGE), + {0,} /* 0 terminated list. */ +}; + +/* This changes depending if 1HA or 2HA: + * 1HA: + * 0x0eb8 (17.0) is DDRIO0 + * 2HA: + * 0x0ebc (17.4) is DDRIO0 + */ +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0 0x0eb8 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0 0x0ebc + +/* pci ids */ +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0 0x0ea0 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA 0x0ea8 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS 0x0e71 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0 0x0eaa +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1 0x0eab +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2 0x0eac +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3 0x0ead +#define PCI_DEVICE_ID_INTEL_IBRIDGE_SAD 0x0ec8 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_BR0 0x0ec9 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_BR1 0x0eca +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1 0x0e60 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA 0x0e68 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS 0x0e79 +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0 0x0e6a +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1 0x0e6b +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2 0x0e6c +#define PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3 0x0e6d + +static const struct pci_id_descr pci_dev_descr_ibridge[] = { + /* Processor Home Agent */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1, 1, IMC1) }, + + /* Memory controller */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3, 0, IMC0) }, + + /* Optional, mode 2HA */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3, 1, IMC1) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0, 1, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0, 1, SOCK) }, + + /* System Address Decoder */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_SAD, 0, SOCK) }, + + /* Broadcast Registers */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR0, 1, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_IBRIDGE_BR1, 0, SOCK) }, + +}; + +static const struct pci_id_table pci_dev_descr_ibridge_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, 12, 2, IVY_BRIDGE), + {0,} /* 0 terminated list. */ +}; + +/* Haswell support */ +/* EN processor: + * - 1 IMC + * - 3 DDR3 channels, 2 DPC per channel + * EP processor: + * - 1 or 2 IMC + * - 4 DDR4 channels, 3 DPC per channel + * EP 4S processor: + * - 2 IMC + * - 4 DDR4 channels, 3 DPC per channel + * EX processor: + * - 2 IMC + * - each IMC interfaces with a SMI 2 channel + * - each SMI channel interfaces with a scalable memory buffer + * - each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC + */ +#define HASWELL_DDRCRCLKCONTROLS 0xa10 /* Ditto on Broadwell */ +#define HASWELL_HASYSDEFEATURE2 0x84 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC 0x2f28 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0 0x2fa0 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1 0x2f60 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA 0x2fa8 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM 0x2f71 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA 0x2f68 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM 0x2f79 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0 0x2ffc +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1 0x2ffd +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0 0x2faa +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1 0x2fab +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2 0x2fac +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3 0x2fad +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0 0x2f6a +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1 0x2f6b +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2 0x2f6c +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3 0x2f6d +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0 0x2fbd +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1 0x2fbf +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2 0x2fb9 +#define PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3 0x2fbb +static const struct pci_id_descr pci_dev_descr_haswell[] = { + /* first item must be the HA */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1, 1, IMC1) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2, 1, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3, 1, IMC0) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3, 1, IMC1) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0, 0, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1, 0, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0, 1, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1, 1, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2, 1, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3, 1, SOCK) }, +}; + +static const struct pci_id_table pci_dev_descr_haswell_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, 13, 2, HASWELL), + {0,} /* 0 terminated list. */ +}; + +/* Knight's Landing Support */ +/* + * KNL's memory channels are swizzled between memory controllers. + * MC0 is mapped to CH3,4,5 and MC1 is mapped to CH0,1,2 + */ +#define knl_channel_remap(mc, chan) ((mc) ? (chan) : (chan) + 3) + +/* Memory controller, TAD tables, error injection - 2-8-0, 2-9-0 (2 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_MC 0x7840 +/* DRAM channel stuff; bank addrs, dimmmtr, etc.. 2-8-2 - 2-9-4 (6 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN 0x7843 +/* kdrwdbu TAD limits/offsets, MCMTR - 2-10-1, 2-11-1 (2 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_TA 0x7844 +/* CHA broadcast registers, dram rules - 1-29-0 (1 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0 0x782a +/* SAD target - 1-29-1 (1 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1 0x782b +/* Caching / Home Agent */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_CHA 0x782c +/* Device with TOLM and TOHM, 0-5-0 (1 of these) */ +#define PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM 0x7810 + +/* + * KNL differs from SB, IB, and Haswell in that it has multiple + * instances of the same device with the same device ID, so we handle that + * by creating as many copies in the table as we expect to find. + * (Like device ID must be grouped together.) + */ + +static const struct pci_id_descr pci_dev_descr_knl[] = { + [0 ... 1] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_MC, 0, IMC0)}, + [2 ... 7] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN, 0, IMC0) }, + [8] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TA, 0, IMC0) }, + [9] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM, 0, IMC0) }, + [10] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0, 0, SOCK) }, + [11] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1, 0, SOCK) }, + [12 ... 49] = { PCI_DESCR(PCI_DEVICE_ID_INTEL_KNL_IMC_CHA, 0, SOCK) }, +}; + +static const struct pci_id_table pci_dev_descr_knl_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, ARRAY_SIZE(pci_dev_descr_knl), 1, KNIGHTS_LANDING), + {0,} +}; + +/* + * Broadwell support + * + * DE processor: + * - 1 IMC + * - 2 DDR3 channels, 2 DPC per channel + * EP processor: + * - 1 or 2 IMC + * - 4 DDR4 channels, 3 DPC per channel + * EP 4S processor: + * - 2 IMC + * - 4 DDR4 channels, 3 DPC per channel + * EX processor: + * - 2 IMC + * - each IMC interfaces with a SMI 2 channel + * - each SMI channel interfaces with a scalable memory buffer + * - each scalable memory buffer supports 4 DDR3/DDR4 channels, 3 DPC + */ +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC 0x6f28 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0 0x6fa0 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1 0x6f60 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA 0x6fa8 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM 0x6f71 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA 0x6f68 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM 0x6f79 +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0 0x6ffc +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1 0x6ffd +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0 0x6faa +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1 0x6fab +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2 0x6fac +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3 0x6fad +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0 0x6f6a +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1 0x6f6b +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2 0x6f6c +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3 0x6f6d +#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0 0x6faf + +static const struct pci_id_descr pci_dev_descr_broadwell[] = { + /* first item must be the HA */ + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1, 1, IMC1) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1, 0, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2, 1, IMC0) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3, 1, IMC0) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2, 1, IMC1) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3, 1, IMC1) }, + + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0, 0, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1, 0, SOCK) }, + { PCI_DESCR(PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0, 1, SOCK) }, +}; + +static const struct pci_id_table pci_dev_descr_broadwell_table[] = { + PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, 10, 2, BROADWELL), + {0,} /* 0 terminated list. */ +}; + + +/**************************************************************************** + Ancillary status routines + ****************************************************************************/ + +static inline int numrank(enum type type, u32 mtr) +{ + int ranks = (1 << RANK_CNT_BITS(mtr)); + int max = 4; + + if (type == HASWELL || type == BROADWELL || type == KNIGHTS_LANDING) + max = 8; + + if (ranks > max) { + edac_dbg(0, "Invalid number of ranks: %d (max = %i) raw value = %x (%04x)\n", + ranks, max, (unsigned int)RANK_CNT_BITS(mtr), mtr); + return -EINVAL; + } + + return ranks; +} + +static inline int numrow(u32 mtr) +{ + int rows = (RANK_WIDTH_BITS(mtr) + 12); + + if (rows < 13 || rows > 18) { + edac_dbg(0, "Invalid number of rows: %d (should be between 14 and 17) raw value = %x (%04x)\n", + rows, (unsigned int)RANK_WIDTH_BITS(mtr), mtr); + return -EINVAL; + } + + return 1 << rows; +} + +static inline int numcol(u32 mtr) +{ + int cols = (COL_WIDTH_BITS(mtr) + 10); + + if (cols > 12) { + edac_dbg(0, "Invalid number of cols: %d (max = 4) raw value = %x (%04x)\n", + cols, (unsigned int)COL_WIDTH_BITS(mtr), mtr); + return -EINVAL; + } + + return 1 << cols; +} + +static struct sbridge_dev *get_sbridge_dev(int seg, u8 bus, enum domain dom, + int multi_bus, + struct sbridge_dev *prev) +{ + struct sbridge_dev *sbridge_dev; + + /* + * If we have devices scattered across several busses that pertain + * to the same memory controller, we'll lump them all together. + */ + if (multi_bus) { + return list_first_entry_or_null(&sbridge_edac_list, + struct sbridge_dev, list); + } + + sbridge_dev = list_entry(prev ? prev->list.next + : sbridge_edac_list.next, struct sbridge_dev, list); + + list_for_each_entry_from(sbridge_dev, &sbridge_edac_list, list) { + if ((sbridge_dev->seg == seg) && (sbridge_dev->bus == bus) && + (dom == SOCK || dom == sbridge_dev->dom)) + return sbridge_dev; + } + + return NULL; +} + +static struct sbridge_dev *alloc_sbridge_dev(int seg, u8 bus, enum domain dom, + const struct pci_id_table *table) +{ + struct sbridge_dev *sbridge_dev; + + sbridge_dev = kzalloc(sizeof(*sbridge_dev), GFP_KERNEL); + if (!sbridge_dev) + return NULL; + + sbridge_dev->pdev = kcalloc(table->n_devs_per_imc, + sizeof(*sbridge_dev->pdev), + GFP_KERNEL); + if (!sbridge_dev->pdev) { + kfree(sbridge_dev); + return NULL; + } + + sbridge_dev->seg = seg; + sbridge_dev->bus = bus; + sbridge_dev->dom = dom; + sbridge_dev->n_devs = table->n_devs_per_imc; + list_add_tail(&sbridge_dev->list, &sbridge_edac_list); + + return sbridge_dev; +} + +static void free_sbridge_dev(struct sbridge_dev *sbridge_dev) +{ + list_del(&sbridge_dev->list); + kfree(sbridge_dev->pdev); + kfree(sbridge_dev); +} + +static u64 sbridge_get_tolm(struct sbridge_pvt *pvt) +{ + u32 reg; + + /* Address range is 32:28 */ + pci_read_config_dword(pvt->pci_sad1, TOLM, ®); + return GET_TOLM(reg); +} + +static u64 sbridge_get_tohm(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->pci_sad1, TOHM, ®); + return GET_TOHM(reg); +} + +static u64 ibridge_get_tolm(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->pci_br1, TOLM, ®); + + return GET_TOLM(reg); +} + +static u64 ibridge_get_tohm(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->pci_br1, TOHM, ®); + + return GET_TOHM(reg); +} + +static u64 rir_limit(u32 reg) +{ + return ((u64)GET_BITFIELD(reg, 1, 10) << 29) | 0x1fffffff; +} + +static u64 sad_limit(u32 reg) +{ + return (GET_BITFIELD(reg, 6, 25) << 26) | 0x3ffffff; +} + +static u32 interleave_mode(u32 reg) +{ + return GET_BITFIELD(reg, 1, 1); +} + +static u32 dram_attr(u32 reg) +{ + return GET_BITFIELD(reg, 2, 3); +} + +static u64 knl_sad_limit(u32 reg) +{ + return (GET_BITFIELD(reg, 7, 26) << 26) | 0x3ffffff; +} + +static u32 knl_interleave_mode(u32 reg) +{ + return GET_BITFIELD(reg, 1, 2); +} + +static const char * const knl_intlv_mode[] = { + "[8:6]", "[10:8]", "[14:12]", "[32:30]" +}; + +static const char *get_intlv_mode_str(u32 reg, enum type t) +{ + if (t == KNIGHTS_LANDING) + return knl_intlv_mode[knl_interleave_mode(reg)]; + else + return interleave_mode(reg) ? "[8:6]" : "[8:6]XOR[18:16]"; +} + +static u32 dram_attr_knl(u32 reg) +{ + return GET_BITFIELD(reg, 3, 4); +} + + +static enum mem_type get_memory_type(struct sbridge_pvt *pvt) +{ + u32 reg; + enum mem_type mtype; + + if (pvt->pci_ddrio) { + pci_read_config_dword(pvt->pci_ddrio, pvt->info.rankcfgr, + ®); + if (GET_BITFIELD(reg, 11, 11)) + /* FIXME: Can also be LRDIMM */ + mtype = MEM_RDDR3; + else + mtype = MEM_DDR3; + } else + mtype = MEM_UNKNOWN; + + return mtype; +} + +static enum mem_type haswell_get_memory_type(struct sbridge_pvt *pvt) +{ + u32 reg; + bool registered = false; + enum mem_type mtype = MEM_UNKNOWN; + + if (!pvt->pci_ddrio) + goto out; + + pci_read_config_dword(pvt->pci_ddrio, + HASWELL_DDRCRCLKCONTROLS, ®); + /* Is_Rdimm */ + if (GET_BITFIELD(reg, 16, 16)) + registered = true; + + pci_read_config_dword(pvt->pci_ta, MCMTR, ®); + if (GET_BITFIELD(reg, 14, 14)) { + if (registered) + mtype = MEM_RDDR4; + else + mtype = MEM_DDR4; + } else { + if (registered) + mtype = MEM_RDDR3; + else + mtype = MEM_DDR3; + } + +out: + return mtype; +} + +static enum dev_type knl_get_width(struct sbridge_pvt *pvt, u32 mtr) +{ + /* for KNL value is fixed */ + return DEV_X16; +} + +static enum dev_type sbridge_get_width(struct sbridge_pvt *pvt, u32 mtr) +{ + /* there's no way to figure out */ + return DEV_UNKNOWN; +} + +static enum dev_type __ibridge_get_width(u32 mtr) +{ + enum dev_type type = DEV_UNKNOWN; + + switch (mtr) { + case 2: + type = DEV_X16; + break; + case 1: + type = DEV_X8; + break; + case 0: + type = DEV_X4; + break; + } + + return type; +} + +static enum dev_type ibridge_get_width(struct sbridge_pvt *pvt, u32 mtr) +{ + /* + * ddr3_width on the documentation but also valid for DDR4 on + * Haswell + */ + return __ibridge_get_width(GET_BITFIELD(mtr, 7, 8)); +} + +static enum dev_type broadwell_get_width(struct sbridge_pvt *pvt, u32 mtr) +{ + /* ddr3_width on the documentation but also valid for DDR4 */ + return __ibridge_get_width(GET_BITFIELD(mtr, 8, 9)); +} + +static enum mem_type knl_get_memory_type(struct sbridge_pvt *pvt) +{ + /* DDR4 RDIMMS and LRDIMMS are supported */ + return MEM_RDDR4; +} + +static u8 get_node_id(struct sbridge_pvt *pvt) +{ + u32 reg; + pci_read_config_dword(pvt->pci_br0, SAD_CONTROL, ®); + return GET_BITFIELD(reg, 0, 2); +} + +static u8 haswell_get_node_id(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, ®); + return GET_BITFIELD(reg, 0, 3); +} + +static u8 knl_get_node_id(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->pci_sad1, SAD_CONTROL, ®); + return GET_BITFIELD(reg, 0, 2); +} + +/* + * Use the reporting bank number to determine which memory + * controller (also known as "ha" for "home agent"). Sandy + * Bridge only has one memory controller per socket, so the + * answer is always zero. + */ +static u8 sbridge_get_ha(u8 bank) +{ + return 0; +} + +/* + * On Ivy Bridge, Haswell and Broadwell the error may be in a + * home agent bank (7, 8), or one of the per-channel memory + * controller banks (9 .. 16). + */ +static u8 ibridge_get_ha(u8 bank) +{ + switch (bank) { + case 7 ... 8: + return bank - 7; + case 9 ... 16: + return (bank - 9) / 4; + default: + return 0xff; + } +} + +/* Not used, but included for safety/symmetry */ +static u8 knl_get_ha(u8 bank) +{ + return 0xff; +} + +static u64 haswell_get_tolm(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOLM, ®); + return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff; +} + +static u64 haswell_get_tohm(struct sbridge_pvt *pvt) +{ + u64 rc; + u32 reg; + + pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_0, ®); + rc = GET_BITFIELD(reg, 26, 31); + pci_read_config_dword(pvt->info.pci_vtd, HASWELL_TOHM_1, ®); + rc = ((reg << 6) | rc) << 26; + + return rc | 0x3ffffff; +} + +static u64 knl_get_tolm(struct sbridge_pvt *pvt) +{ + u32 reg; + + pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOLM, ®); + return (GET_BITFIELD(reg, 26, 31) << 26) | 0x3ffffff; +} + +static u64 knl_get_tohm(struct sbridge_pvt *pvt) +{ + u64 rc; + u32 reg_lo, reg_hi; + + pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_0, ®_lo); + pci_read_config_dword(pvt->knl.pci_mc_info, KNL_TOHM_1, ®_hi); + rc = ((u64)reg_hi << 32) | reg_lo; + return rc | 0x3ffffff; +} + + +static u64 haswell_rir_limit(u32 reg) +{ + return (((u64)GET_BITFIELD(reg, 1, 11) + 1) << 29) - 1; +} + +static inline u8 sad_pkg_socket(u8 pkg) +{ + /* on Ivy Bridge, nodeID is SASS, where A is HA and S is node id */ + return ((pkg >> 3) << 2) | (pkg & 0x3); +} + +static inline u8 sad_pkg_ha(u8 pkg) +{ + return (pkg >> 2) & 0x1; +} + +static int haswell_chan_hash(int idx, u64 addr) +{ + int i; + + /* + * XOR even bits from 12:26 to bit0 of idx, + * odd bits from 13:27 to bit1 + */ + for (i = 12; i < 28; i += 2) + idx ^= (addr >> i) & 3; + + return idx; +} + +/* Low bits of TAD limit, and some metadata. */ +static const u32 knl_tad_dram_limit_lo[] = { + 0x400, 0x500, 0x600, 0x700, + 0x800, 0x900, 0xa00, 0xb00, +}; + +/* Low bits of TAD offset. */ +static const u32 knl_tad_dram_offset_lo[] = { + 0x404, 0x504, 0x604, 0x704, + 0x804, 0x904, 0xa04, 0xb04, +}; + +/* High 16 bits of TAD limit and offset. */ +static const u32 knl_tad_dram_hi[] = { + 0x408, 0x508, 0x608, 0x708, + 0x808, 0x908, 0xa08, 0xb08, +}; + +/* Number of ways a tad entry is interleaved. */ +static const u32 knl_tad_ways[] = { + 8, 6, 4, 3, 2, 1, +}; + +/* + * Retrieve the n'th Target Address Decode table entry + * from the memory controller's TAD table. + * + * @pvt: driver private data + * @entry: which entry you want to retrieve + * @mc: which memory controller (0 or 1) + * @offset: output tad range offset + * @limit: output address of first byte above tad range + * @ways: output number of interleave ways + * + * The offset value has curious semantics. It's a sort of running total + * of the sizes of all the memory regions that aren't mapped in this + * tad table. + */ +static int knl_get_tad(const struct sbridge_pvt *pvt, + const int entry, + const int mc, + u64 *offset, + u64 *limit, + int *ways) +{ + u32 reg_limit_lo, reg_offset_lo, reg_hi; + struct pci_dev *pci_mc; + int way_id; + + switch (mc) { + case 0: + pci_mc = pvt->knl.pci_mc0; + break; + case 1: + pci_mc = pvt->knl.pci_mc1; + break; + default: + WARN_ON(1); + return -EINVAL; + } + + pci_read_config_dword(pci_mc, + knl_tad_dram_limit_lo[entry], ®_limit_lo); + pci_read_config_dword(pci_mc, + knl_tad_dram_offset_lo[entry], ®_offset_lo); + pci_read_config_dword(pci_mc, + knl_tad_dram_hi[entry], ®_hi); + + /* Is this TAD entry enabled? */ + if (!GET_BITFIELD(reg_limit_lo, 0, 0)) + return -ENODEV; + + way_id = GET_BITFIELD(reg_limit_lo, 3, 5); + + if (way_id < ARRAY_SIZE(knl_tad_ways)) { + *ways = knl_tad_ways[way_id]; + } else { + *ways = 0; + sbridge_printk(KERN_ERR, + "Unexpected value %d in mc_tad_limit_lo wayness field\n", + way_id); + return -ENODEV; + } + + /* + * The least significant 6 bits of base and limit are truncated. + * For limit, we fill the missing bits with 1s. + */ + *offset = ((u64) GET_BITFIELD(reg_offset_lo, 6, 31) << 6) | + ((u64) GET_BITFIELD(reg_hi, 0, 15) << 32); + *limit = ((u64) GET_BITFIELD(reg_limit_lo, 6, 31) << 6) | 63 | + ((u64) GET_BITFIELD(reg_hi, 16, 31) << 32); + + return 0; +} + +/* Determine which memory controller is responsible for a given channel. */ +static int knl_channel_mc(int channel) +{ + WARN_ON(channel < 0 || channel >= 6); + + return channel < 3 ? 1 : 0; +} + +/* + * Get the Nth entry from EDC_ROUTE_TABLE register. + * (This is the per-tile mapping of logical interleave targets to + * physical EDC modules.) + * + * entry 0: 0:2 + * 1: 3:5 + * 2: 6:8 + * 3: 9:11 + * 4: 12:14 + * 5: 15:17 + * 6: 18:20 + * 7: 21:23 + * reserved: 24:31 + */ +static u32 knl_get_edc_route(int entry, u32 reg) +{ + WARN_ON(entry >= KNL_MAX_EDCS); + return GET_BITFIELD(reg, entry*3, (entry*3)+2); +} + +/* + * Get the Nth entry from MC_ROUTE_TABLE register. + * (This is the per-tile mapping of logical interleave targets to + * physical DRAM channels modules.) + * + * entry 0: mc 0:2 channel 18:19 + * 1: mc 3:5 channel 20:21 + * 2: mc 6:8 channel 22:23 + * 3: mc 9:11 channel 24:25 + * 4: mc 12:14 channel 26:27 + * 5: mc 15:17 channel 28:29 + * reserved: 30:31 + * + * Though we have 3 bits to identify the MC, we should only see + * the values 0 or 1. + */ + +static u32 knl_get_mc_route(int entry, u32 reg) +{ + int mc, chan; + + WARN_ON(entry >= KNL_MAX_CHANNELS); + + mc = GET_BITFIELD(reg, entry*3, (entry*3)+2); + chan = GET_BITFIELD(reg, (entry*2) + 18, (entry*2) + 18 + 1); + + return knl_channel_remap(mc, chan); +} + +/* + * Render the EDC_ROUTE register in human-readable form. + * Output string s should be at least KNL_MAX_EDCS*2 bytes. + */ +static void knl_show_edc_route(u32 reg, char *s) +{ + int i; + + for (i = 0; i < KNL_MAX_EDCS; i++) { + s[i*2] = knl_get_edc_route(i, reg) + '0'; + s[i*2+1] = '-'; + } + + s[KNL_MAX_EDCS*2 - 1] = '\0'; +} + +/* + * Render the MC_ROUTE register in human-readable form. + * Output string s should be at least KNL_MAX_CHANNELS*2 bytes. + */ +static void knl_show_mc_route(u32 reg, char *s) +{ + int i; + + for (i = 0; i < KNL_MAX_CHANNELS; i++) { + s[i*2] = knl_get_mc_route(i, reg) + '0'; + s[i*2+1] = '-'; + } + + s[KNL_MAX_CHANNELS*2 - 1] = '\0'; +} + +#define KNL_EDC_ROUTE 0xb8 +#define KNL_MC_ROUTE 0xb4 + +/* Is this dram rule backed by regular DRAM in flat mode? */ +#define KNL_EDRAM(reg) GET_BITFIELD(reg, 29, 29) + +/* Is this dram rule cached? */ +#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28) + +/* Is this rule backed by edc ? */ +#define KNL_EDRAM_ONLY(reg) GET_BITFIELD(reg, 29, 29) + +/* Is this rule backed by DRAM, cacheable in EDRAM? */ +#define KNL_CACHEABLE(reg) GET_BITFIELD(reg, 28, 28) + +/* Is this rule mod3? */ +#define KNL_MOD3(reg) GET_BITFIELD(reg, 27, 27) + +/* + * Figure out how big our RAM modules are. + * + * The DIMMMTR register in KNL doesn't tell us the size of the DIMMs, so we + * have to figure this out from the SAD rules, interleave lists, route tables, + * and TAD rules. + * + * SAD rules can have holes in them (e.g. the 3G-4G hole), so we have to + * inspect the TAD rules to figure out how large the SAD regions really are. + * + * When we know the real size of a SAD region and how many ways it's + * interleaved, we know the individual contribution of each channel to + * TAD is size/ways. + * + * Finally, we have to check whether each channel participates in each SAD + * region. + * + * Fortunately, KNL only supports one DIMM per channel, so once we know how + * much memory the channel uses, we know the DIMM is at least that large. + * (The BIOS might possibly choose not to map all available memory, in which + * case we will underreport the size of the DIMM.) + * + * In theory, we could try to determine the EDC sizes as well, but that would + * only work in flat mode, not in cache mode. + * + * @mc_sizes: Output sizes of channels (must have space for KNL_MAX_CHANNELS + * elements) + */ +static int knl_get_dimm_capacity(struct sbridge_pvt *pvt, u64 *mc_sizes) +{ + u64 sad_base, sad_limit = 0; + u64 tad_base, tad_size, tad_limit, tad_deadspace, tad_livespace; + int sad_rule = 0; + int tad_rule = 0; + int intrlv_ways, tad_ways; + u32 first_pkg, pkg; + int i; + u64 sad_actual_size[2]; /* sad size accounting for holes, per mc */ + u32 dram_rule, interleave_reg; + u32 mc_route_reg[KNL_MAX_CHAS]; + u32 edc_route_reg[KNL_MAX_CHAS]; + int edram_only; + char edc_route_string[KNL_MAX_EDCS*2]; + char mc_route_string[KNL_MAX_CHANNELS*2]; + int cur_reg_start; + int mc; + int channel; + int participants[KNL_MAX_CHANNELS]; + + for (i = 0; i < KNL_MAX_CHANNELS; i++) + mc_sizes[i] = 0; + + /* Read the EDC route table in each CHA. */ + cur_reg_start = 0; + for (i = 0; i < KNL_MAX_CHAS; i++) { + pci_read_config_dword(pvt->knl.pci_cha[i], + KNL_EDC_ROUTE, &edc_route_reg[i]); + + if (i > 0 && edc_route_reg[i] != edc_route_reg[i-1]) { + knl_show_edc_route(edc_route_reg[i-1], + edc_route_string); + if (cur_reg_start == i-1) + edac_dbg(0, "edc route table for CHA %d: %s\n", + cur_reg_start, edc_route_string); + else + edac_dbg(0, "edc route table for CHA %d-%d: %s\n", + cur_reg_start, i-1, edc_route_string); + cur_reg_start = i; + } + } + knl_show_edc_route(edc_route_reg[i-1], edc_route_string); + if (cur_reg_start == i-1) + edac_dbg(0, "edc route table for CHA %d: %s\n", + cur_reg_start, edc_route_string); + else + edac_dbg(0, "edc route table for CHA %d-%d: %s\n", + cur_reg_start, i-1, edc_route_string); + + /* Read the MC route table in each CHA. */ + cur_reg_start = 0; + for (i = 0; i < KNL_MAX_CHAS; i++) { + pci_read_config_dword(pvt->knl.pci_cha[i], + KNL_MC_ROUTE, &mc_route_reg[i]); + + if (i > 0 && mc_route_reg[i] != mc_route_reg[i-1]) { + knl_show_mc_route(mc_route_reg[i-1], mc_route_string); + if (cur_reg_start == i-1) + edac_dbg(0, "mc route table for CHA %d: %s\n", + cur_reg_start, mc_route_string); + else + edac_dbg(0, "mc route table for CHA %d-%d: %s\n", + cur_reg_start, i-1, mc_route_string); + cur_reg_start = i; + } + } + knl_show_mc_route(mc_route_reg[i-1], mc_route_string); + if (cur_reg_start == i-1) + edac_dbg(0, "mc route table for CHA %d: %s\n", + cur_reg_start, mc_route_string); + else + edac_dbg(0, "mc route table for CHA %d-%d: %s\n", + cur_reg_start, i-1, mc_route_string); + + /* Process DRAM rules */ + for (sad_rule = 0; sad_rule < pvt->info.max_sad; sad_rule++) { + /* previous limit becomes the new base */ + sad_base = sad_limit; + + pci_read_config_dword(pvt->pci_sad0, + pvt->info.dram_rule[sad_rule], &dram_rule); + + if (!DRAM_RULE_ENABLE(dram_rule)) + break; + + edram_only = KNL_EDRAM_ONLY(dram_rule); + + sad_limit = pvt->info.sad_limit(dram_rule)+1; + + pci_read_config_dword(pvt->pci_sad0, + pvt->info.interleave_list[sad_rule], &interleave_reg); + + /* + * Find out how many ways this dram rule is interleaved. + * We stop when we see the first channel again. + */ + first_pkg = sad_pkg(pvt->info.interleave_pkg, + interleave_reg, 0); + for (intrlv_ways = 1; intrlv_ways < 8; intrlv_ways++) { + pkg = sad_pkg(pvt->info.interleave_pkg, + interleave_reg, intrlv_ways); + + if ((pkg & 0x8) == 0) { + /* + * 0 bit means memory is non-local, + * which KNL doesn't support + */ + edac_dbg(0, "Unexpected interleave target %d\n", + pkg); + return -1; + } + + if (pkg == first_pkg) + break; + } + if (KNL_MOD3(dram_rule)) + intrlv_ways *= 3; + + edac_dbg(3, "dram rule %d (base 0x%llx, limit 0x%llx), %d way interleave%s\n", + sad_rule, + sad_base, + sad_limit, + intrlv_ways, + edram_only ? ", EDRAM" : ""); + + /* + * Find out how big the SAD region really is by iterating + * over TAD tables (SAD regions may contain holes). + * Each memory controller might have a different TAD table, so + * we have to look at both. + * + * Livespace is the memory that's mapped in this TAD table, + * deadspace is the holes (this could be the MMIO hole, or it + * could be memory that's mapped by the other TAD table but + * not this one). + */ + for (mc = 0; mc < 2; mc++) { + sad_actual_size[mc] = 0; + tad_livespace = 0; + for (tad_rule = 0; + tad_rule < ARRAY_SIZE( + knl_tad_dram_limit_lo); + tad_rule++) { + if (knl_get_tad(pvt, + tad_rule, + mc, + &tad_deadspace, + &tad_limit, + &tad_ways)) + break; + + tad_size = (tad_limit+1) - + (tad_livespace + tad_deadspace); + tad_livespace += tad_size; + tad_base = (tad_limit+1) - tad_size; + + if (tad_base < sad_base) { + if (tad_limit > sad_base) + edac_dbg(0, "TAD region overlaps lower SAD boundary -- TAD tables may be configured incorrectly.\n"); + } else if (tad_base < sad_limit) { + if (tad_limit+1 > sad_limit) { + edac_dbg(0, "TAD region overlaps upper SAD boundary -- TAD tables may be configured incorrectly.\n"); + } else { + /* TAD region is completely inside SAD region */ + edac_dbg(3, "TAD region %d 0x%llx - 0x%llx (%lld bytes) table%d\n", + tad_rule, tad_base, + tad_limit, tad_size, + mc); + sad_actual_size[mc] += tad_size; + } + } + } + } + + for (mc = 0; mc < 2; mc++) { + edac_dbg(3, " total TAD DRAM footprint in table%d : 0x%llx (%lld bytes)\n", + mc, sad_actual_size[mc], sad_actual_size[mc]); + } + + /* Ignore EDRAM rule */ + if (edram_only) + continue; + + /* Figure out which channels participate in interleave. */ + for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) + participants[channel] = 0; + + /* For each channel, does at least one CHA have + * this channel mapped to the given target? + */ + for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) { + int target; + int cha; + + for (target = 0; target < KNL_MAX_CHANNELS; target++) { + for (cha = 0; cha < KNL_MAX_CHAS; cha++) { + if (knl_get_mc_route(target, + mc_route_reg[cha]) == channel + && !participants[channel]) { + participants[channel] = 1; + break; + } + } + } + } + + for (channel = 0; channel < KNL_MAX_CHANNELS; channel++) { + mc = knl_channel_mc(channel); + if (participants[channel]) { + edac_dbg(4, "mc channel %d contributes %lld bytes via sad entry %d\n", + channel, + sad_actual_size[mc]/intrlv_ways, + sad_rule); + mc_sizes[channel] += + sad_actual_size[mc]/intrlv_ways; + } + } + } + + return 0; +} + +static void get_source_id(struct mem_ctl_info *mci) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + u32 reg; + + if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL || + pvt->info.type == KNIGHTS_LANDING) + pci_read_config_dword(pvt->pci_sad1, SAD_TARGET, ®); + else + pci_read_config_dword(pvt->pci_br0, SAD_TARGET, ®); + + if (pvt->info.type == KNIGHTS_LANDING) + pvt->sbridge_dev->source_id = SOURCE_ID_KNL(reg); + else + pvt->sbridge_dev->source_id = SOURCE_ID(reg); +} + +static int __populate_dimms(struct mem_ctl_info *mci, + u64 knl_mc_sizes[KNL_MAX_CHANNELS], + enum edac_type mode) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + int channels = pvt->info.type == KNIGHTS_LANDING ? KNL_MAX_CHANNELS + : NUM_CHANNELS; + unsigned int i, j, banks, ranks, rows, cols, npages; + struct dimm_info *dimm; + enum mem_type mtype; + u64 size; + + mtype = pvt->info.get_memory_type(pvt); + if (mtype == MEM_RDDR3 || mtype == MEM_RDDR4) + edac_dbg(0, "Memory is registered\n"); + else if (mtype == MEM_UNKNOWN) + edac_dbg(0, "Cannot determine memory type\n"); + else + edac_dbg(0, "Memory is unregistered\n"); + + if (mtype == MEM_DDR4 || mtype == MEM_RDDR4) + banks = 16; + else + banks = 8; + + for (i = 0; i < channels; i++) { + u32 mtr, amap = 0; + + int max_dimms_per_channel; + + if (pvt->info.type == KNIGHTS_LANDING) { + max_dimms_per_channel = 1; + if (!pvt->knl.pci_channel[i]) + continue; + } else { + max_dimms_per_channel = ARRAY_SIZE(mtr_regs); + if (!pvt->pci_tad[i]) + continue; + pci_read_config_dword(pvt->pci_tad[i], 0x8c, &amap); + } + + for (j = 0; j < max_dimms_per_channel; j++) { + dimm = edac_get_dimm(mci, i, j, 0); + if (pvt->info.type == KNIGHTS_LANDING) { + pci_read_config_dword(pvt->knl.pci_channel[i], + knl_mtr_reg, &mtr); + } else { + pci_read_config_dword(pvt->pci_tad[i], + mtr_regs[j], &mtr); + } + edac_dbg(4, "Channel #%d MTR%d = %x\n", i, j, mtr); + + if (IS_DIMM_PRESENT(mtr)) { + if (!IS_ECC_ENABLED(pvt->info.mcmtr)) { + sbridge_printk(KERN_ERR, "CPU SrcID #%d, Ha #%d, Channel #%d has DIMMs, but ECC is disabled\n", + pvt->sbridge_dev->source_id, + pvt->sbridge_dev->dom, i); + return -ENODEV; + } + pvt->channel[i].dimms++; + + ranks = numrank(pvt->info.type, mtr); + + if (pvt->info.type == KNIGHTS_LANDING) { + /* For DDR4, this is fixed. */ + cols = 1 << 10; + rows = knl_mc_sizes[i] / + ((u64) cols * ranks * banks * 8); + } else { + rows = numrow(mtr); + cols = numcol(mtr); + } + + size = ((u64)rows * cols * banks * ranks) >> (20 - 3); + npages = MiB_TO_PAGES(size); + + edac_dbg(0, "mc#%d: ha %d channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: %#x, col: %#x\n", + pvt->sbridge_dev->mc, pvt->sbridge_dev->dom, i, j, + size, npages, + banks, ranks, rows, cols); + + dimm->nr_pages = npages; + dimm->grain = 32; + dimm->dtype = pvt->info.get_width(pvt, mtr); + dimm->mtype = mtype; + dimm->edac_mode = mode; + pvt->channel[i].dimm[j].rowbits = order_base_2(rows); + pvt->channel[i].dimm[j].colbits = order_base_2(cols); + pvt->channel[i].dimm[j].bank_xor_enable = + GET_BITFIELD(pvt->info.mcmtr, 9, 9); + pvt->channel[i].dimm[j].amap_fine = GET_BITFIELD(amap, 0, 0); + snprintf(dimm->label, sizeof(dimm->label), + "CPU_SrcID#%u_Ha#%u_Chan#%u_DIMM#%u", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom, i, j); + } + } + } + + return 0; +} + +static int get_dimm_config(struct mem_ctl_info *mci) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + u64 knl_mc_sizes[KNL_MAX_CHANNELS]; + enum edac_type mode; + u32 reg; + + pvt->sbridge_dev->node_id = pvt->info.get_node_id(pvt); + edac_dbg(0, "mc#%d: Node ID: %d, source ID: %d\n", + pvt->sbridge_dev->mc, + pvt->sbridge_dev->node_id, + pvt->sbridge_dev->source_id); + + /* KNL doesn't support mirroring or lockstep, + * and is always closed page + */ + if (pvt->info.type == KNIGHTS_LANDING) { + mode = EDAC_S4ECD4ED; + pvt->mirror_mode = NON_MIRRORING; + pvt->is_cur_addr_mirrored = false; + + if (knl_get_dimm_capacity(pvt, knl_mc_sizes) != 0) + return -1; + if (pci_read_config_dword(pvt->pci_ta, KNL_MCMTR, &pvt->info.mcmtr)) { + edac_dbg(0, "Failed to read KNL_MCMTR register\n"); + return -ENODEV; + } + } else { + if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) { + if (pci_read_config_dword(pvt->pci_ha, HASWELL_HASYSDEFEATURE2, ®)) { + edac_dbg(0, "Failed to read HASWELL_HASYSDEFEATURE2 register\n"); + return -ENODEV; + } + pvt->is_chan_hash = GET_BITFIELD(reg, 21, 21); + if (GET_BITFIELD(reg, 28, 28)) { + pvt->mirror_mode = ADDR_RANGE_MIRRORING; + edac_dbg(0, "Address range partial memory mirroring is enabled\n"); + goto next; + } + } + if (pci_read_config_dword(pvt->pci_ras, RASENABLES, ®)) { + edac_dbg(0, "Failed to read RASENABLES register\n"); + return -ENODEV; + } + if (IS_MIRROR_ENABLED(reg)) { + pvt->mirror_mode = FULL_MIRRORING; + edac_dbg(0, "Full memory mirroring is enabled\n"); + } else { + pvt->mirror_mode = NON_MIRRORING; + edac_dbg(0, "Memory mirroring is disabled\n"); + } + +next: + if (pci_read_config_dword(pvt->pci_ta, MCMTR, &pvt->info.mcmtr)) { + edac_dbg(0, "Failed to read MCMTR register\n"); + return -ENODEV; + } + if (IS_LOCKSTEP_ENABLED(pvt->info.mcmtr)) { + edac_dbg(0, "Lockstep is enabled\n"); + mode = EDAC_S8ECD8ED; + pvt->is_lockstep = true; + } else { + edac_dbg(0, "Lockstep is disabled\n"); + mode = EDAC_S4ECD4ED; + pvt->is_lockstep = false; + } + if (IS_CLOSE_PG(pvt->info.mcmtr)) { + edac_dbg(0, "address map is on closed page mode\n"); + pvt->is_close_pg = true; + } else { + edac_dbg(0, "address map is on open page mode\n"); + pvt->is_close_pg = false; + } + } + + return __populate_dimms(mci, knl_mc_sizes, mode); +} + +static void get_memory_layout(const struct mem_ctl_info *mci) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + int i, j, k, n_sads, n_tads, sad_interl; + u32 reg; + u64 limit, prv = 0; + u64 tmp_mb; + u32 gb, mb; + u32 rir_way; + + /* + * Step 1) Get TOLM/TOHM ranges + */ + + pvt->tolm = pvt->info.get_tolm(pvt); + tmp_mb = (1 + pvt->tolm) >> 20; + + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "TOLM: %u.%03u GB (0x%016Lx)\n", + gb, (mb*1000)/1024, (u64)pvt->tolm); + + /* Address range is already 45:25 */ + pvt->tohm = pvt->info.get_tohm(pvt); + tmp_mb = (1 + pvt->tohm) >> 20; + + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)\n", + gb, (mb*1000)/1024, (u64)pvt->tohm); + + /* + * Step 2) Get SAD range and SAD Interleave list + * TAD registers contain the interleave wayness. However, it + * seems simpler to just discover it indirectly, with the + * algorithm bellow. + */ + prv = 0; + for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) { + /* SAD_LIMIT Address range is 45:26 */ + pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads], + ®); + limit = pvt->info.sad_limit(reg); + + if (!DRAM_RULE_ENABLE(reg)) + continue; + + if (limit <= prv) + break; + + tmp_mb = (limit + 1) >> 20; + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "SAD#%d %s up to %u.%03u GB (0x%016Lx) Interleave: %s reg=0x%08x\n", + n_sads, + show_dram_attr(pvt->info.dram_attr(reg)), + gb, (mb*1000)/1024, + ((u64)tmp_mb) << 20L, + get_intlv_mode_str(reg, pvt->info.type), + reg); + prv = limit; + + pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads], + ®); + sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0); + for (j = 0; j < 8; j++) { + u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, j); + if (j > 0 && sad_interl == pkg) + break; + + edac_dbg(0, "SAD#%d, interleave #%d: %d\n", + n_sads, j, pkg); + } + } + + if (pvt->info.type == KNIGHTS_LANDING) + return; + + /* + * Step 3) Get TAD range + */ + prv = 0; + for (n_tads = 0; n_tads < MAX_TAD; n_tads++) { + pci_read_config_dword(pvt->pci_ha, tad_dram_rule[n_tads], ®); + limit = TAD_LIMIT(reg); + if (limit <= prv) + break; + tmp_mb = (limit + 1) >> 20; + + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "TAD#%d: up to %u.%03u GB (0x%016Lx), socket interleave %d, memory interleave %d, TGT: %d, %d, %d, %d, reg=0x%08x\n", + n_tads, gb, (mb*1000)/1024, + ((u64)tmp_mb) << 20L, + (u32)(1 << TAD_SOCK(reg)), + (u32)TAD_CH(reg) + 1, + (u32)TAD_TGT0(reg), + (u32)TAD_TGT1(reg), + (u32)TAD_TGT2(reg), + (u32)TAD_TGT3(reg), + reg); + prv = limit; + } + + /* + * Step 4) Get TAD offsets, per each channel + */ + for (i = 0; i < NUM_CHANNELS; i++) { + if (!pvt->channel[i].dimms) + continue; + for (j = 0; j < n_tads; j++) { + pci_read_config_dword(pvt->pci_tad[i], + tad_ch_nilv_offset[j], + ®); + tmp_mb = TAD_OFFSET(reg) >> 20; + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "TAD CH#%d, offset #%d: %u.%03u GB (0x%016Lx), reg=0x%08x\n", + i, j, + gb, (mb*1000)/1024, + ((u64)tmp_mb) << 20L, + reg); + } + } + + /* + * Step 6) Get RIR Wayness/Limit, per each channel + */ + for (i = 0; i < NUM_CHANNELS; i++) { + if (!pvt->channel[i].dimms) + continue; + for (j = 0; j < MAX_RIR_RANGES; j++) { + pci_read_config_dword(pvt->pci_tad[i], + rir_way_limit[j], + ®); + + if (!IS_RIR_VALID(reg)) + continue; + + tmp_mb = pvt->info.rir_limit(reg) >> 20; + rir_way = 1 << RIR_WAY(reg); + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "CH#%d RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d, reg=0x%08x\n", + i, j, + gb, (mb*1000)/1024, + ((u64)tmp_mb) << 20L, + rir_way, + reg); + + for (k = 0; k < rir_way; k++) { + pci_read_config_dword(pvt->pci_tad[i], + rir_offset[j][k], + ®); + tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6; + + gb = div_u64_rem(tmp_mb, 1024, &mb); + edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n", + i, j, k, + gb, (mb*1000)/1024, + ((u64)tmp_mb) << 20L, + (u32)RIR_RNK_TGT(pvt->info.type, reg), + reg); + } + } + } +} + +static struct mem_ctl_info *get_mci_for_node_id(u8 node_id, u8 ha) +{ + struct sbridge_dev *sbridge_dev; + + list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) { + if (sbridge_dev->node_id == node_id && sbridge_dev->dom == ha) + return sbridge_dev->mci; + } + return NULL; +} + +static u8 sb_close_row[] = { + 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33 +}; + +static u8 sb_close_column[] = { + 3, 4, 5, 14, 19, 23, 24, 25, 26, 27 +}; + +static u8 sb_open_row[] = { + 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33 +}; + +static u8 sb_open_column[] = { + 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 +}; + +static u8 sb_open_fine_column[] = { + 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 +}; + +static int sb_bits(u64 addr, int nbits, u8 *bits) +{ + int i, res = 0; + + for (i = 0; i < nbits; i++) + res |= ((addr >> bits[i]) & 1) << i; + return res; +} + +static int sb_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1) +{ + int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1); + + if (do_xor) + ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1); + + return ret; +} + +static bool sb_decode_ddr4(struct mem_ctl_info *mci, int ch, u8 rank, + u64 rank_addr, char *msg) +{ + int dimmno = 0; + int row, col, bank_address, bank_group; + struct sbridge_pvt *pvt; + u32 bg0 = 0, rowbits = 0, colbits = 0; + u32 amap_fine = 0, bank_xor_enable = 0; + + dimmno = (rank < 12) ? rank / 4 : 2; + pvt = mci->pvt_info; + amap_fine = pvt->channel[ch].dimm[dimmno].amap_fine; + bg0 = amap_fine ? 6 : 13; + rowbits = pvt->channel[ch].dimm[dimmno].rowbits; + colbits = pvt->channel[ch].dimm[dimmno].colbits; + bank_xor_enable = pvt->channel[ch].dimm[dimmno].bank_xor_enable; + + if (pvt->is_lockstep) { + pr_warn_once("LockStep row/column decode is not supported yet!\n"); + msg[0] = '\0'; + return false; + } + + if (pvt->is_close_pg) { + row = sb_bits(rank_addr, rowbits, sb_close_row); + col = sb_bits(rank_addr, colbits, sb_close_column); + col |= 0x400; /* C10 is autoprecharge, always set */ + bank_address = sb_bank_bits(rank_addr, 8, 9, bank_xor_enable, 22, 28); + bank_group = sb_bank_bits(rank_addr, 6, 7, bank_xor_enable, 20, 21); + } else { + row = sb_bits(rank_addr, rowbits, sb_open_row); + if (amap_fine) + col = sb_bits(rank_addr, colbits, sb_open_fine_column); + else + col = sb_bits(rank_addr, colbits, sb_open_column); + bank_address = sb_bank_bits(rank_addr, 18, 19, bank_xor_enable, 22, 23); + bank_group = sb_bank_bits(rank_addr, bg0, 17, bank_xor_enable, 20, 21); + } + + row &= (1u << rowbits) - 1; + + sprintf(msg, "row:0x%x col:0x%x bank_addr:%d bank_group:%d", + row, col, bank_address, bank_group); + return true; +} + +static bool sb_decode_ddr3(struct mem_ctl_info *mci, int ch, u8 rank, + u64 rank_addr, char *msg) +{ + pr_warn_once("DDR3 row/column decode not support yet!\n"); + msg[0] = '\0'; + return false; +} + +static int get_memory_error_data(struct mem_ctl_info *mci, + u64 addr, + u8 *socket, u8 *ha, + long *channel_mask, + u8 *rank, + char **area_type, char *msg) +{ + struct mem_ctl_info *new_mci; + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pci_ha; + int n_rir, n_sads, n_tads, sad_way, sck_xch; + int sad_interl, idx, base_ch; + int interleave_mode, shiftup = 0; + unsigned int sad_interleave[MAX_INTERLEAVE]; + u32 reg, dram_rule; + u8 ch_way, sck_way, pkg, sad_ha = 0, rankid = 0; + u32 tad_offset; + u32 rir_way; + u32 mb, gb; + u64 ch_addr, offset, limit = 0, prv = 0; + u64 rank_addr; + enum mem_type mtype; + + /* + * Step 0) Check if the address is at special memory ranges + * The check bellow is probably enough to fill all cases where + * the error is not inside a memory, except for the legacy + * range (e. g. VGA addresses). It is unlikely, however, that the + * memory controller would generate an error on that range. + */ + if ((addr > (u64) pvt->tolm) && (addr < (1LL << 32))) { + sprintf(msg, "Error at TOLM area, on addr 0x%08Lx", addr); + return -EINVAL; + } + if (addr >= (u64)pvt->tohm) { + sprintf(msg, "Error at MMIOH area, on addr 0x%016Lx", addr); + return -EINVAL; + } + + /* + * Step 1) Get socket + */ + for (n_sads = 0; n_sads < pvt->info.max_sad; n_sads++) { + pci_read_config_dword(pvt->pci_sad0, pvt->info.dram_rule[n_sads], + ®); + + if (!DRAM_RULE_ENABLE(reg)) + continue; + + limit = pvt->info.sad_limit(reg); + if (limit <= prv) { + sprintf(msg, "Can't discover the memory socket"); + return -EINVAL; + } + if (addr <= limit) + break; + prv = limit; + } + if (n_sads == pvt->info.max_sad) { + sprintf(msg, "Can't discover the memory socket"); + return -EINVAL; + } + dram_rule = reg; + *area_type = show_dram_attr(pvt->info.dram_attr(dram_rule)); + interleave_mode = pvt->info.interleave_mode(dram_rule); + + pci_read_config_dword(pvt->pci_sad0, pvt->info.interleave_list[n_sads], + ®); + + if (pvt->info.type == SANDY_BRIDGE) { + sad_interl = sad_pkg(pvt->info.interleave_pkg, reg, 0); + for (sad_way = 0; sad_way < 8; sad_way++) { + u32 pkg = sad_pkg(pvt->info.interleave_pkg, reg, sad_way); + if (sad_way > 0 && sad_interl == pkg) + break; + sad_interleave[sad_way] = pkg; + edac_dbg(0, "SAD interleave #%d: %d\n", + sad_way, sad_interleave[sad_way]); + } + edac_dbg(0, "mc#%d: Error detected on SAD#%d: address 0x%016Lx < 0x%016Lx, Interleave [%d:6]%s\n", + pvt->sbridge_dev->mc, + n_sads, + addr, + limit, + sad_way + 7, + !interleave_mode ? "" : "XOR[18:16]"); + if (interleave_mode) + idx = ((addr >> 6) ^ (addr >> 16)) & 7; + else + idx = (addr >> 6) & 7; + switch (sad_way) { + case 1: + idx = 0; + break; + case 2: + idx = idx & 1; + break; + case 4: + idx = idx & 3; + break; + case 8: + break; + default: + sprintf(msg, "Can't discover socket interleave"); + return -EINVAL; + } + *socket = sad_interleave[idx]; + edac_dbg(0, "SAD interleave index: %d (wayness %d) = CPU socket %d\n", + idx, sad_way, *socket); + } else if (pvt->info.type == HASWELL || pvt->info.type == BROADWELL) { + int bits, a7mode = A7MODE(dram_rule); + + if (a7mode) { + /* A7 mode swaps P9 with P6 */ + bits = GET_BITFIELD(addr, 7, 8) << 1; + bits |= GET_BITFIELD(addr, 9, 9); + } else + bits = GET_BITFIELD(addr, 6, 8); + + if (interleave_mode == 0) { + /* interleave mode will XOR {8,7,6} with {18,17,16} */ + idx = GET_BITFIELD(addr, 16, 18); + idx ^= bits; + } else + idx = bits; + + pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx); + *socket = sad_pkg_socket(pkg); + sad_ha = sad_pkg_ha(pkg); + + if (a7mode) { + /* MCChanShiftUpEnable */ + pci_read_config_dword(pvt->pci_ha, HASWELL_HASYSDEFEATURE2, ®); + shiftup = GET_BITFIELD(reg, 22, 22); + } + + edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %i, shiftup: %i\n", + idx, *socket, sad_ha, shiftup); + } else { + /* Ivy Bridge's SAD mode doesn't support XOR interleave mode */ + idx = (addr >> 6) & 7; + pkg = sad_pkg(pvt->info.interleave_pkg, reg, idx); + *socket = sad_pkg_socket(pkg); + sad_ha = sad_pkg_ha(pkg); + edac_dbg(0, "SAD interleave package: %d = CPU socket %d, HA %d\n", + idx, *socket, sad_ha); + } + + *ha = sad_ha; + + /* + * Move to the proper node structure, in order to access the + * right PCI registers + */ + new_mci = get_mci_for_node_id(*socket, sad_ha); + if (!new_mci) { + sprintf(msg, "Struct for socket #%u wasn't initialized", + *socket); + return -EINVAL; + } + mci = new_mci; + pvt = mci->pvt_info; + + /* + * Step 2) Get memory channel + */ + prv = 0; + pci_ha = pvt->pci_ha; + for (n_tads = 0; n_tads < MAX_TAD; n_tads++) { + pci_read_config_dword(pci_ha, tad_dram_rule[n_tads], ®); + limit = TAD_LIMIT(reg); + if (limit <= prv) { + sprintf(msg, "Can't discover the memory channel"); + return -EINVAL; + } + if (addr <= limit) + break; + prv = limit; + } + if (n_tads == MAX_TAD) { + sprintf(msg, "Can't discover the memory channel"); + return -EINVAL; + } + + ch_way = TAD_CH(reg) + 1; + sck_way = TAD_SOCK(reg); + + if (ch_way == 3) + idx = addr >> 6; + else { + idx = (addr >> (6 + sck_way + shiftup)) & 0x3; + if (pvt->is_chan_hash) + idx = haswell_chan_hash(idx, addr); + } + idx = idx % ch_way; + + /* + * FIXME: Shouldn't we use CHN_IDX_OFFSET() here, when ch_way == 3 ??? + */ + switch (idx) { + case 0: + base_ch = TAD_TGT0(reg); + break; + case 1: + base_ch = TAD_TGT1(reg); + break; + case 2: + base_ch = TAD_TGT2(reg); + break; + case 3: + base_ch = TAD_TGT3(reg); + break; + default: + sprintf(msg, "Can't discover the TAD target"); + return -EINVAL; + } + *channel_mask = 1 << base_ch; + + pci_read_config_dword(pvt->pci_tad[base_ch], tad_ch_nilv_offset[n_tads], &tad_offset); + + if (pvt->mirror_mode == FULL_MIRRORING || + (pvt->mirror_mode == ADDR_RANGE_MIRRORING && n_tads == 0)) { + *channel_mask |= 1 << ((base_ch + 2) % 4); + switch(ch_way) { + case 2: + case 4: + sck_xch = (1 << sck_way) * (ch_way >> 1); + break; + default: + sprintf(msg, "Invalid mirror set. Can't decode addr"); + return -EINVAL; + } + + pvt->is_cur_addr_mirrored = true; + } else { + sck_xch = (1 << sck_way) * ch_way; + pvt->is_cur_addr_mirrored = false; + } + + if (pvt->is_lockstep) + *channel_mask |= 1 << ((base_ch + 1) % 4); + + offset = TAD_OFFSET(tad_offset); + + edac_dbg(0, "TAD#%d: address 0x%016Lx < 0x%016Lx, socket interleave %d, channel interleave %d (offset 0x%08Lx), index %d, base ch: %d, ch mask: 0x%02lx\n", + n_tads, + addr, + limit, + sck_way, + ch_way, + offset, + idx, + base_ch, + *channel_mask); + + /* Calculate channel address */ + /* Remove the TAD offset */ + + if (offset > addr) { + sprintf(msg, "Can't calculate ch addr: TAD offset 0x%08Lx is too high for addr 0x%08Lx!", + offset, addr); + return -EINVAL; + } + + ch_addr = addr - offset; + ch_addr >>= (6 + shiftup); + ch_addr /= sck_xch; + ch_addr <<= (6 + shiftup); + ch_addr |= addr & ((1 << (6 + shiftup)) - 1); + + /* + * Step 3) Decode rank + */ + for (n_rir = 0; n_rir < MAX_RIR_RANGES; n_rir++) { + pci_read_config_dword(pvt->pci_tad[base_ch], rir_way_limit[n_rir], ®); + + if (!IS_RIR_VALID(reg)) + continue; + + limit = pvt->info.rir_limit(reg); + gb = div_u64_rem(limit >> 20, 1024, &mb); + edac_dbg(0, "RIR#%d, limit: %u.%03u GB (0x%016Lx), way: %d\n", + n_rir, + gb, (mb*1000)/1024, + limit, + 1 << RIR_WAY(reg)); + if (ch_addr <= limit) + break; + } + if (n_rir == MAX_RIR_RANGES) { + sprintf(msg, "Can't discover the memory rank for ch addr 0x%08Lx", + ch_addr); + return -EINVAL; + } + rir_way = RIR_WAY(reg); + + if (pvt->is_close_pg) + idx = (ch_addr >> 6); + else + idx = (ch_addr >> 13); /* FIXME: Datasheet says to shift by 15 */ + idx %= 1 << rir_way; + + pci_read_config_dword(pvt->pci_tad[base_ch], rir_offset[n_rir][idx], ®); + *rank = RIR_RNK_TGT(pvt->info.type, reg); + + if (pvt->info.type == BROADWELL) { + if (pvt->is_close_pg) + shiftup = 6; + else + shiftup = 13; + + rank_addr = ch_addr >> shiftup; + rank_addr /= (1 << rir_way); + rank_addr <<= shiftup; + rank_addr |= ch_addr & GENMASK_ULL(shiftup - 1, 0); + rank_addr -= RIR_OFFSET(pvt->info.type, reg); + + mtype = pvt->info.get_memory_type(pvt); + rankid = *rank; + if (mtype == MEM_DDR4 || mtype == MEM_RDDR4) + sb_decode_ddr4(mci, base_ch, rankid, rank_addr, msg); + else + sb_decode_ddr3(mci, base_ch, rankid, rank_addr, msg); + } else { + msg[0] = '\0'; + } + + edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n", + n_rir, + ch_addr, + limit, + rir_way, + idx); + + return 0; +} + +static int get_memory_error_data_from_mce(struct mem_ctl_info *mci, + const struct mce *m, u8 *socket, + u8 *ha, long *channel_mask, + char *msg) +{ + u32 reg, channel = GET_BITFIELD(m->status, 0, 3); + struct mem_ctl_info *new_mci; + struct sbridge_pvt *pvt; + struct pci_dev *pci_ha; + bool tad0; + + if (channel >= NUM_CHANNELS) { + sprintf(msg, "Invalid channel 0x%x", channel); + return -EINVAL; + } + + pvt = mci->pvt_info; + if (!pvt->info.get_ha) { + sprintf(msg, "No get_ha()"); + return -EINVAL; + } + *ha = pvt->info.get_ha(m->bank); + if (*ha != 0 && *ha != 1) { + sprintf(msg, "Impossible bank %d", m->bank); + return -EINVAL; + } + + *socket = m->socketid; + new_mci = get_mci_for_node_id(*socket, *ha); + if (!new_mci) { + strcpy(msg, "mci socket got corrupted!"); + return -EINVAL; + } + + pvt = new_mci->pvt_info; + pci_ha = pvt->pci_ha; + pci_read_config_dword(pci_ha, tad_dram_rule[0], ®); + tad0 = m->addr <= TAD_LIMIT(reg); + + *channel_mask = 1 << channel; + if (pvt->mirror_mode == FULL_MIRRORING || + (pvt->mirror_mode == ADDR_RANGE_MIRRORING && tad0)) { + *channel_mask |= 1 << ((channel + 2) % 4); + pvt->is_cur_addr_mirrored = true; + } else { + pvt->is_cur_addr_mirrored = false; + } + + if (pvt->is_lockstep) + *channel_mask |= 1 << ((channel + 1) % 4); + + return 0; +} + +/**************************************************************************** + Device initialization routines: put/get, init/exit + ****************************************************************************/ + +/* + * sbridge_put_all_devices 'put' all the devices that we have + * reserved via 'get' + */ +static void sbridge_put_devices(struct sbridge_dev *sbridge_dev) +{ + int i; + + edac_dbg(0, "\n"); + for (i = 0; i < sbridge_dev->n_devs; i++) { + struct pci_dev *pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + edac_dbg(0, "Removing dev %02x:%02x.%d\n", + pdev->bus->number, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + pci_dev_put(pdev); + } +} + +static void sbridge_put_all_devices(void) +{ + struct sbridge_dev *sbridge_dev, *tmp; + + list_for_each_entry_safe(sbridge_dev, tmp, &sbridge_edac_list, list) { + sbridge_put_devices(sbridge_dev); + free_sbridge_dev(sbridge_dev); + } +} + +static int sbridge_get_onedevice(struct pci_dev **prev, + u8 *num_mc, + const struct pci_id_table *table, + const unsigned devno, + const int multi_bus) +{ + struct sbridge_dev *sbridge_dev = NULL; + const struct pci_id_descr *dev_descr = &table->descr[devno]; + struct pci_dev *pdev = NULL; + int seg = 0; + u8 bus = 0; + int i = 0; + + sbridge_printk(KERN_DEBUG, + "Seeking for: PCI ID %04x:%04x\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + dev_descr->dev_id, *prev); + + if (!pdev) { + if (*prev) { + *prev = pdev; + return 0; + } + + if (dev_descr->optional) + return 0; + + /* if the HA wasn't found */ + if (devno == 0) + return -ENODEV; + + sbridge_printk(KERN_INFO, + "Device not found: %04x:%04x\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + /* End of list, leave */ + return -ENODEV; + } + seg = pci_domain_nr(pdev->bus); + bus = pdev->bus->number; + +next_imc: + sbridge_dev = get_sbridge_dev(seg, bus, dev_descr->dom, + multi_bus, sbridge_dev); + if (!sbridge_dev) { + /* If the HA1 wasn't found, don't create EDAC second memory controller */ + if (dev_descr->dom == IMC1 && devno != 1) { + edac_dbg(0, "Skip IMC1: %04x:%04x (since HA1 was absent)\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + pci_dev_put(pdev); + return 0; + } + + if (dev_descr->dom == SOCK) + goto out_imc; + + sbridge_dev = alloc_sbridge_dev(seg, bus, dev_descr->dom, table); + if (!sbridge_dev) { + pci_dev_put(pdev); + return -ENOMEM; + } + (*num_mc)++; + } + + if (sbridge_dev->pdev[sbridge_dev->i_devs]) { + sbridge_printk(KERN_ERR, + "Duplicated device for %04x:%04x\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + pci_dev_put(pdev); + return -ENODEV; + } + + sbridge_dev->pdev[sbridge_dev->i_devs++] = pdev; + + /* pdev belongs to more than one IMC, do extra gets */ + if (++i > 1) + pci_dev_get(pdev); + + if (dev_descr->dom == SOCK && i < table->n_imcs_per_sock) + goto next_imc; + +out_imc: + /* Be sure that the device is enabled */ + if (unlikely(pci_enable_device(pdev) < 0)) { + sbridge_printk(KERN_ERR, + "Couldn't enable %04x:%04x\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + return -ENODEV; + } + + edac_dbg(0, "Detected %04x:%04x\n", + PCI_VENDOR_ID_INTEL, dev_descr->dev_id); + + /* + * As stated on drivers/pci/search.c, the reference count for + * @from is always decremented if it is not %NULL. So, as we need + * to get all devices up to null, we need to do a get for the device + */ + pci_dev_get(pdev); + + *prev = pdev; + + return 0; +} + +/* + * sbridge_get_all_devices - Find and perform 'get' operation on the MCH's + * devices we want to reference for this driver. + * @num_mc: pointer to the memory controllers count, to be incremented in case + * of success. + * @table: model specific table + * + * returns 0 in case of success or error code + */ +static int sbridge_get_all_devices(u8 *num_mc, + const struct pci_id_table *table) +{ + int i, rc; + struct pci_dev *pdev = NULL; + int allow_dups = 0; + int multi_bus = 0; + + if (table->type == KNIGHTS_LANDING) + allow_dups = multi_bus = 1; + while (table && table->descr) { + for (i = 0; i < table->n_devs_per_sock; i++) { + if (!allow_dups || i == 0 || + table->descr[i].dev_id != + table->descr[i-1].dev_id) { + pdev = NULL; + } + do { + rc = sbridge_get_onedevice(&pdev, num_mc, + table, i, multi_bus); + if (rc < 0) { + if (i == 0) { + i = table->n_devs_per_sock; + break; + } + sbridge_put_all_devices(); + return -ENODEV; + } + } while (pdev && !allow_dups); + } + table++; + } + + return 0; +} + +/* + * Device IDs for {SBRIDGE,IBRIDGE,HASWELL,BROADWELL}_IMC_HA0_TAD0 are in + * the format: XXXa. So we can convert from a device to the corresponding + * channel like this + */ +#define TAD_DEV_TO_CHAN(dev) (((dev) & 0xf) - 0xa) + +static int sbridge_mci_bind_devs(struct mem_ctl_info *mci, + struct sbridge_dev *sbridge_dev) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + u8 saw_chan_mask = 0; + int i; + + for (i = 0; i < sbridge_dev->n_devs; i++) { + pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD0: + pvt->pci_sad0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_SAD1: + pvt->pci_sad1 = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_BR: + pvt->pci_br0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_HA0: + pvt->pci_ha = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA: + pvt->pci_ta = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_RAS: + pvt->pci_ras = pdev; + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD0: + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD1: + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD2: + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TAD3: + { + int id = TAD_DEV_TO_CHAN(pdev->device); + pvt->pci_tad[id] = pdev; + saw_chan_mask |= 1 << id; + } + break; + case PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_DDRIO: + pvt->pci_ddrio = pdev; + break; + default: + goto error; + } + + edac_dbg(0, "Associated PCI %02x:%02x, bus %d with dev = %p\n", + pdev->vendor, pdev->device, + sbridge_dev->bus, + pdev); + } + + /* Check if everything were registered */ + if (!pvt->pci_sad0 || !pvt->pci_sad1 || !pvt->pci_ha || + !pvt->pci_ras || !pvt->pci_ta) + goto enodev; + + if (saw_chan_mask != 0x0f) + goto enodev; + return 0; + +enodev: + sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); + return -ENODEV; + +error: + sbridge_printk(KERN_ERR, "Unexpected device %02x:%02x\n", + PCI_VENDOR_ID_INTEL, pdev->device); + return -EINVAL; +} + +static int ibridge_mci_bind_devs(struct mem_ctl_info *mci, + struct sbridge_dev *sbridge_dev) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + u8 saw_chan_mask = 0; + int i; + + for (i = 0; i < sbridge_dev->n_devs; i++) { + pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1: + pvt->pci_ha = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TA: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TA: + pvt->pci_ta = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_RAS: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_RAS: + pvt->pci_ras = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD0: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD1: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD2: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA0_TAD3: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD0: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD1: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD2: + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_HA1_TAD3: + { + int id = TAD_DEV_TO_CHAN(pdev->device); + pvt->pci_tad[id] = pdev; + saw_chan_mask |= 1 << id; + } + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_2HA_DDRIO0: + pvt->pci_ddrio = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_IMC_1HA_DDRIO0: + pvt->pci_ddrio = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_SAD: + pvt->pci_sad0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_BR0: + pvt->pci_br0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_IBRIDGE_BR1: + pvt->pci_br1 = pdev; + break; + default: + goto error; + } + + edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", + sbridge_dev->bus, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev); + } + + /* Check if everything were registered */ + if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_br0 || + !pvt->pci_br1 || !pvt->pci_ras || !pvt->pci_ta) + goto enodev; + + if (saw_chan_mask != 0x0f && /* -EN/-EX */ + saw_chan_mask != 0x03) /* -EP */ + goto enodev; + return 0; + +enodev: + sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); + return -ENODEV; + +error: + sbridge_printk(KERN_ERR, + "Unexpected device %02x:%02x\n", PCI_VENDOR_ID_INTEL, + pdev->device); + return -EINVAL; +} + +static int haswell_mci_bind_devs(struct mem_ctl_info *mci, + struct sbridge_dev *sbridge_dev) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + u8 saw_chan_mask = 0; + int i; + + /* there's only one device per system; not tied to any bus */ + if (pvt->info.pci_vtd == NULL) + /* result will be checked later */ + pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_HASWELL_IMC_VTD_MISC, + NULL); + + for (i = 0; i < sbridge_dev->n_devs; i++) { + pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD0: + pvt->pci_sad0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_CBO_SAD1: + pvt->pci_sad1 = pdev; + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1: + pvt->pci_ha = pdev; + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TA: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TA: + pvt->pci_ta = pdev; + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TM: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TM: + pvt->pci_ras = pdev; + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD0: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD1: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD2: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA0_TAD3: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD0: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD1: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD2: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_HA1_TAD3: + { + int id = TAD_DEV_TO_CHAN(pdev->device); + pvt->pci_tad[id] = pdev; + saw_chan_mask |= 1 << id; + } + break; + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO0: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO1: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO2: + case PCI_DEVICE_ID_INTEL_HASWELL_IMC_DDRIO3: + if (!pvt->pci_ddrio) + pvt->pci_ddrio = pdev; + break; + default: + break; + } + + edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", + sbridge_dev->bus, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev); + } + + /* Check if everything were registered */ + if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_sad1 || + !pvt->pci_ras || !pvt->pci_ta || !pvt->info.pci_vtd) + goto enodev; + + if (saw_chan_mask != 0x0f && /* -EN/-EX */ + saw_chan_mask != 0x03) /* -EP */ + goto enodev; + return 0; + +enodev: + sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); + return -ENODEV; +} + +static int broadwell_mci_bind_devs(struct mem_ctl_info *mci, + struct sbridge_dev *sbridge_dev) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + u8 saw_chan_mask = 0; + int i; + + /* there's only one device per system; not tied to any bus */ + if (pvt->info.pci_vtd == NULL) + /* result will be checked later */ + pvt->info.pci_vtd = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_BROADWELL_IMC_VTD_MISC, + NULL); + + for (i = 0; i < sbridge_dev->n_devs; i++) { + pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD0: + pvt->pci_sad0 = pdev; + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_CBO_SAD1: + pvt->pci_sad1 = pdev; + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1: + pvt->pci_ha = pdev; + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TA: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TA: + pvt->pci_ta = pdev; + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TM: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TM: + pvt->pci_ras = pdev; + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD0: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD1: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD2: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA0_TAD3: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD0: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD1: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD2: + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_HA1_TAD3: + { + int id = TAD_DEV_TO_CHAN(pdev->device); + pvt->pci_tad[id] = pdev; + saw_chan_mask |= 1 << id; + } + break; + case PCI_DEVICE_ID_INTEL_BROADWELL_IMC_DDRIO0: + pvt->pci_ddrio = pdev; + break; + default: + break; + } + + edac_dbg(0, "Associated PCI %02x.%02d.%d with dev = %p\n", + sbridge_dev->bus, + PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), + pdev); + } + + /* Check if everything were registered */ + if (!pvt->pci_sad0 || !pvt->pci_ha || !pvt->pci_sad1 || + !pvt->pci_ras || !pvt->pci_ta || !pvt->info.pci_vtd) + goto enodev; + + if (saw_chan_mask != 0x0f && /* -EN/-EX */ + saw_chan_mask != 0x03) /* -EP */ + goto enodev; + return 0; + +enodev: + sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); + return -ENODEV; +} + +static int knl_mci_bind_devs(struct mem_ctl_info *mci, + struct sbridge_dev *sbridge_dev) +{ + struct sbridge_pvt *pvt = mci->pvt_info; + struct pci_dev *pdev; + int dev, func; + + int i; + int devidx; + + for (i = 0; i < sbridge_dev->n_devs; i++) { + pdev = sbridge_dev->pdev[i]; + if (!pdev) + continue; + + /* Extract PCI device and function. */ + dev = (pdev->devfn >> 3) & 0x1f; + func = pdev->devfn & 0x7; + + switch (pdev->device) { + case PCI_DEVICE_ID_INTEL_KNL_IMC_MC: + if (dev == 8) + pvt->knl.pci_mc0 = pdev; + else if (dev == 9) + pvt->knl.pci_mc1 = pdev; + else { + sbridge_printk(KERN_ERR, + "Memory controller in unexpected place! (dev %d, fn %d)\n", + dev, func); + continue; + } + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD0: + pvt->pci_sad0 = pdev; + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_SAD1: + pvt->pci_sad1 = pdev; + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_CHA: + /* There are one of these per tile, and range from + * 1.14.0 to 1.18.5. + */ + devidx = ((dev-14)*8)+func; + + if (devidx < 0 || devidx >= KNL_MAX_CHAS) { + sbridge_printk(KERN_ERR, + "Caching and Home Agent in unexpected place! (dev %d, fn %d)\n", + dev, func); + continue; + } + + WARN_ON(pvt->knl.pci_cha[devidx] != NULL); + + pvt->knl.pci_cha[devidx] = pdev; + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_CHAN: + devidx = -1; + + /* + * MC0 channels 0-2 are device 9 function 2-4, + * MC1 channels 3-5 are device 8 function 2-4. + */ + + if (dev == 9) + devidx = func-2; + else if (dev == 8) + devidx = 3 + (func-2); + + if (devidx < 0 || devidx >= KNL_MAX_CHANNELS) { + sbridge_printk(KERN_ERR, + "DRAM Channel Registers in unexpected place! (dev %d, fn %d)\n", + dev, func); + continue; + } + + WARN_ON(pvt->knl.pci_channel[devidx] != NULL); + pvt->knl.pci_channel[devidx] = pdev; + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_TOLHM: + pvt->knl.pci_mc_info = pdev; + break; + + case PCI_DEVICE_ID_INTEL_KNL_IMC_TA: + pvt->pci_ta = pdev; + break; + + default: + sbridge_printk(KERN_ERR, "Unexpected device %d\n", + pdev->device); + break; + } + } + + if (!pvt->knl.pci_mc0 || !pvt->knl.pci_mc1 || + !pvt->pci_sad0 || !pvt->pci_sad1 || + !pvt->pci_ta) { + goto enodev; + } + + for (i = 0; i < KNL_MAX_CHANNELS; i++) { + if (!pvt->knl.pci_channel[i]) { + sbridge_printk(KERN_ERR, "Missing channel %d\n", i); + goto enodev; + } + } + + for (i = 0; i < KNL_MAX_CHAS; i++) { + if (!pvt->knl.pci_cha[i]) { + sbridge_printk(KERN_ERR, "Missing CHA %d\n", i); + goto enodev; + } + } + + return 0; + +enodev: + sbridge_printk(KERN_ERR, "Some needed devices are missing\n"); + return -ENODEV; +} + +/**************************************************************************** + Error check routines + ****************************************************************************/ + +/* + * While Sandy Bridge has error count registers, SMI BIOS read values from + * and resets the counters. So, they are not reliable for the OS to read + * from them. So, we have no option but to just trust on whatever MCE is + * telling us about the errors. + */ +static void sbridge_mce_output_error(struct mem_ctl_info *mci, + const struct mce *m) +{ + struct mem_ctl_info *new_mci; + struct sbridge_pvt *pvt = mci->pvt_info; + enum hw_event_mc_err_type tp_event; + char *optype, msg[256], msg_full[512]; + bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0); + bool overflow = GET_BITFIELD(m->status, 62, 62); + bool uncorrected_error = GET_BITFIELD(m->status, 61, 61); + bool recoverable; + u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); + u32 mscod = GET_BITFIELD(m->status, 16, 31); + u32 errcode = GET_BITFIELD(m->status, 0, 15); + u32 channel = GET_BITFIELD(m->status, 0, 3); + u32 optypenum = GET_BITFIELD(m->status, 4, 6); + /* + * Bits 5-0 of MCi_MISC give the least significant bit that is valid. + * A value 6 is for cache line aligned address, a value 12 is for page + * aligned address reported by patrol scrubber. + */ + u32 lsb = GET_BITFIELD(m->misc, 0, 5); + long channel_mask, first_channel; + u8 rank = 0xff, socket, ha; + int rc, dimm; + char *area_type = "DRAM"; + + if (pvt->info.type != SANDY_BRIDGE) + recoverable = true; + else + recoverable = GET_BITFIELD(m->status, 56, 56); + + if (uncorrected_error) { + core_err_cnt = 1; + if (ripv) { + tp_event = HW_EVENT_ERR_UNCORRECTED; + } else { + tp_event = HW_EVENT_ERR_FATAL; + } + } else { + tp_event = HW_EVENT_ERR_CORRECTED; + } + + /* + * According with Table 15-9 of the Intel Architecture spec vol 3A, + * memory errors should fit in this mask: + * 000f 0000 1mmm cccc (binary) + * where: + * f = Correction Report Filtering Bit. If 1, subsequent errors + * won't be shown + * mmm = error type + * cccc = channel + * If the mask doesn't match, report an error to the parsing logic + */ + switch (optypenum) { + case 0: + optype = "generic undef request error"; + break; + case 1: + optype = "memory read error"; + break; + case 2: + optype = "memory write error"; + break; + case 3: + optype = "addr/cmd error"; + break; + case 4: + optype = "memory scrubbing error"; + break; + default: + optype = "reserved"; + break; + } + + if (pvt->info.type == KNIGHTS_LANDING) { + if (channel == 14) { + edac_dbg(0, "%s%s err_code:%04x:%04x EDRAM bank %d\n", + overflow ? " OVERFLOW" : "", + (uncorrected_error && recoverable) + ? " recoverable" : "", + mscod, errcode, + m->bank); + } else { + char A = *("A"); + + /* + * Reported channel is in range 0-2, so we can't map it + * back to mc. To figure out mc we check machine check + * bank register that reported this error. + * bank15 means mc0 and bank16 means mc1. + */ + channel = knl_channel_remap(m->bank == 16, channel); + channel_mask = 1 << channel; + + snprintf(msg, sizeof(msg), + "%s%s err_code:%04x:%04x channel:%d (DIMM_%c)", + overflow ? " OVERFLOW" : "", + (uncorrected_error && recoverable) + ? " recoverable" : " ", + mscod, errcode, channel, A + channel); + edac_mc_handle_error(tp_event, mci, core_err_cnt, + m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, + channel, 0, -1, + optype, msg); + } + return; + } else if (lsb < 12) { + rc = get_memory_error_data(mci, m->addr, &socket, &ha, + &channel_mask, &rank, + &area_type, msg); + } else { + rc = get_memory_error_data_from_mce(mci, m, &socket, &ha, + &channel_mask, msg); + } + + if (rc < 0) + goto err_parsing; + new_mci = get_mci_for_node_id(socket, ha); + if (!new_mci) { + strcpy(msg, "Error: socket got corrupted!"); + goto err_parsing; + } + mci = new_mci; + pvt = mci->pvt_info; + + first_channel = find_first_bit(&channel_mask, NUM_CHANNELS); + + if (rank == 0xff) + dimm = -1; + else if (rank < 4) + dimm = 0; + else if (rank < 8) + dimm = 1; + else + dimm = 2; + + /* + * FIXME: On some memory configurations (mirror, lockstep), the + * Memory Controller can't point the error to a single DIMM. The + * EDAC core should be handling the channel mask, in order to point + * to the group of dimm's where the error may be happening. + */ + if (!pvt->is_lockstep && !pvt->is_cur_addr_mirrored && !pvt->is_close_pg) + channel = first_channel; + snprintf(msg_full, sizeof(msg_full), + "%s%s area:%s err_code:%04x:%04x socket:%d ha:%d channel_mask:%ld rank:%d %s", + overflow ? " OVERFLOW" : "", + (uncorrected_error && recoverable) ? " recoverable" : "", + area_type, + mscod, errcode, + socket, ha, + channel_mask, + rank, msg); + + edac_dbg(0, "%s\n", msg_full); + + /* FIXME: need support for channel mask */ + + if (channel == CHANNEL_UNSPECIFIED) + channel = -1; + + /* Call the helper to output message */ + edac_mc_handle_error(tp_event, mci, core_err_cnt, + m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, + channel, dimm, -1, + optype, msg_full); + return; +err_parsing: + edac_mc_handle_error(tp_event, mci, core_err_cnt, 0, 0, 0, + -1, -1, -1, + msg, ""); + +} + +/* + * Check that logging is enabled and that this is the right type + * of error for us to handle. + */ +static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct mce *mce = (struct mce *)data; + struct mem_ctl_info *mci; + char *type; + + if (mce->kflags & MCE_HANDLED_CEC) + return NOTIFY_DONE; + + /* + * Just let mcelog handle it if the error is + * outside the memory controller. A memory error + * is indicated by bit 7 = 1 and bits = 8-11,13-15 = 0. + * bit 12 has an special meaning. + */ + if ((mce->status & 0xefff) >> 7 != 1) + return NOTIFY_DONE; + + /* Check ADDRV bit in STATUS */ + if (!GET_BITFIELD(mce->status, 58, 58)) + return NOTIFY_DONE; + + /* Check MISCV bit in STATUS */ + if (!GET_BITFIELD(mce->status, 59, 59)) + return NOTIFY_DONE; + + /* Check address type in MISC (physical address only) */ + if (GET_BITFIELD(mce->misc, 6, 8) != 2) + return NOTIFY_DONE; + + mci = get_mci_for_node_id(mce->socketid, IMC0); + if (!mci) + return NOTIFY_DONE; + + if (mce->mcgstatus & MCG_STATUS_MCIP) + type = "Exception"; + else + type = "Event"; + + sbridge_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n"); + + sbridge_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: %Lx " + "Bank %d: %016Lx\n", mce->extcpu, type, + mce->mcgstatus, mce->bank, mce->status); + sbridge_mc_printk(mci, KERN_DEBUG, "TSC %llx ", mce->tsc); + sbridge_mc_printk(mci, KERN_DEBUG, "ADDR %llx ", mce->addr); + sbridge_mc_printk(mci, KERN_DEBUG, "MISC %llx ", mce->misc); + + sbridge_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:%x TIME %llu SOCKET " + "%u APIC %x\n", mce->cpuvendor, mce->cpuid, + mce->time, mce->socketid, mce->apicid); + + sbridge_mce_output_error(mci, mce); + + /* Advice mcelog that the error were handled */ + mce->kflags |= MCE_HANDLED_EDAC; + return NOTIFY_OK; +} + +static struct notifier_block sbridge_mce_dec = { + .notifier_call = sbridge_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +/**************************************************************************** + EDAC register/unregister logic + ****************************************************************************/ + +static void sbridge_unregister_mci(struct sbridge_dev *sbridge_dev) +{ + struct mem_ctl_info *mci = sbridge_dev->mci; + + if (unlikely(!mci || !mci->pvt_info)) { + edac_dbg(0, "MC: dev = %p\n", &sbridge_dev->pdev[0]->dev); + + sbridge_printk(KERN_ERR, "Couldn't find mci handler\n"); + return; + } + + edac_dbg(0, "MC: mci = %p, dev = %p\n", + mci, &sbridge_dev->pdev[0]->dev); + + /* Remove MC sysfs nodes */ + edac_mc_del_mc(mci->pdev); + + edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); + kfree(mci->ctl_name); + edac_mc_free(mci); + sbridge_dev->mci = NULL; +} + +static int sbridge_register_mci(struct sbridge_dev *sbridge_dev, enum type type) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct sbridge_pvt *pvt; + struct pci_dev *pdev = sbridge_dev->pdev[0]; + int rc; + + /* allocate a new MC control structure */ + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = type == KNIGHTS_LANDING ? + KNL_MAX_CHANNELS : NUM_CHANNELS; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = type == KNIGHTS_LANDING ? 1 : MAX_DIMMS; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(sbridge_dev->mc, ARRAY_SIZE(layers), layers, + sizeof(*pvt)); + + if (unlikely(!mci)) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p, dev = %p\n", + mci, &pdev->dev); + + pvt = mci->pvt_info; + memset(pvt, 0, sizeof(*pvt)); + + /* Associate sbridge_dev and mci for future usage */ + pvt->sbridge_dev = sbridge_dev; + sbridge_dev->mci = mci; + + mci->mtype_cap = type == KNIGHTS_LANDING ? + MEM_FLAG_DDR4 : MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = EDAC_MOD_STR; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + pvt->info.type = type; + switch (type) { + case IVY_BRIDGE: + pvt->info.rankcfgr = IB_RANK_CFG_A; + pvt->info.get_tolm = ibridge_get_tolm; + pvt->info.get_tohm = ibridge_get_tohm; + pvt->info.dram_rule = ibridge_dram_rule; + pvt->info.get_memory_type = get_memory_type; + pvt->info.get_node_id = get_node_id; + pvt->info.get_ha = ibridge_get_ha; + pvt->info.rir_limit = rir_limit; + pvt->info.sad_limit = sad_limit; + pvt->info.interleave_mode = interleave_mode; + pvt->info.dram_attr = dram_attr; + pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); + pvt->info.interleave_list = ibridge_interleave_list; + pvt->info.interleave_pkg = ibridge_interleave_pkg; + pvt->info.get_width = ibridge_get_width; + + /* Store pci devices at mci for faster access */ + rc = ibridge_mci_bind_devs(mci, sbridge_dev); + if (unlikely(rc < 0)) + goto fail0; + get_source_id(mci); + mci->ctl_name = kasprintf(GFP_KERNEL, "Ivy Bridge SrcID#%d_Ha#%d", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom); + break; + case SANDY_BRIDGE: + pvt->info.rankcfgr = SB_RANK_CFG_A; + pvt->info.get_tolm = sbridge_get_tolm; + pvt->info.get_tohm = sbridge_get_tohm; + pvt->info.dram_rule = sbridge_dram_rule; + pvt->info.get_memory_type = get_memory_type; + pvt->info.get_node_id = get_node_id; + pvt->info.get_ha = sbridge_get_ha; + pvt->info.rir_limit = rir_limit; + pvt->info.sad_limit = sad_limit; + pvt->info.interleave_mode = interleave_mode; + pvt->info.dram_attr = dram_attr; + pvt->info.max_sad = ARRAY_SIZE(sbridge_dram_rule); + pvt->info.interleave_list = sbridge_interleave_list; + pvt->info.interleave_pkg = sbridge_interleave_pkg; + pvt->info.get_width = sbridge_get_width; + + /* Store pci devices at mci for faster access */ + rc = sbridge_mci_bind_devs(mci, sbridge_dev); + if (unlikely(rc < 0)) + goto fail0; + get_source_id(mci); + mci->ctl_name = kasprintf(GFP_KERNEL, "Sandy Bridge SrcID#%d_Ha#%d", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom); + break; + case HASWELL: + /* rankcfgr isn't used */ + pvt->info.get_tolm = haswell_get_tolm; + pvt->info.get_tohm = haswell_get_tohm; + pvt->info.dram_rule = ibridge_dram_rule; + pvt->info.get_memory_type = haswell_get_memory_type; + pvt->info.get_node_id = haswell_get_node_id; + pvt->info.get_ha = ibridge_get_ha; + pvt->info.rir_limit = haswell_rir_limit; + pvt->info.sad_limit = sad_limit; + pvt->info.interleave_mode = interleave_mode; + pvt->info.dram_attr = dram_attr; + pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); + pvt->info.interleave_list = ibridge_interleave_list; + pvt->info.interleave_pkg = ibridge_interleave_pkg; + pvt->info.get_width = ibridge_get_width; + + /* Store pci devices at mci for faster access */ + rc = haswell_mci_bind_devs(mci, sbridge_dev); + if (unlikely(rc < 0)) + goto fail0; + get_source_id(mci); + mci->ctl_name = kasprintf(GFP_KERNEL, "Haswell SrcID#%d_Ha#%d", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom); + break; + case BROADWELL: + /* rankcfgr isn't used */ + pvt->info.get_tolm = haswell_get_tolm; + pvt->info.get_tohm = haswell_get_tohm; + pvt->info.dram_rule = ibridge_dram_rule; + pvt->info.get_memory_type = haswell_get_memory_type; + pvt->info.get_node_id = haswell_get_node_id; + pvt->info.get_ha = ibridge_get_ha; + pvt->info.rir_limit = haswell_rir_limit; + pvt->info.sad_limit = sad_limit; + pvt->info.interleave_mode = interleave_mode; + pvt->info.dram_attr = dram_attr; + pvt->info.max_sad = ARRAY_SIZE(ibridge_dram_rule); + pvt->info.interleave_list = ibridge_interleave_list; + pvt->info.interleave_pkg = ibridge_interleave_pkg; + pvt->info.get_width = broadwell_get_width; + + /* Store pci devices at mci for faster access */ + rc = broadwell_mci_bind_devs(mci, sbridge_dev); + if (unlikely(rc < 0)) + goto fail0; + get_source_id(mci); + mci->ctl_name = kasprintf(GFP_KERNEL, "Broadwell SrcID#%d_Ha#%d", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom); + break; + case KNIGHTS_LANDING: + /* pvt->info.rankcfgr == ??? */ + pvt->info.get_tolm = knl_get_tolm; + pvt->info.get_tohm = knl_get_tohm; + pvt->info.dram_rule = knl_dram_rule; + pvt->info.get_memory_type = knl_get_memory_type; + pvt->info.get_node_id = knl_get_node_id; + pvt->info.get_ha = knl_get_ha; + pvt->info.rir_limit = NULL; + pvt->info.sad_limit = knl_sad_limit; + pvt->info.interleave_mode = knl_interleave_mode; + pvt->info.dram_attr = dram_attr_knl; + pvt->info.max_sad = ARRAY_SIZE(knl_dram_rule); + pvt->info.interleave_list = knl_interleave_list; + pvt->info.interleave_pkg = ibridge_interleave_pkg; + pvt->info.get_width = knl_get_width; + + rc = knl_mci_bind_devs(mci, sbridge_dev); + if (unlikely(rc < 0)) + goto fail0; + get_source_id(mci); + mci->ctl_name = kasprintf(GFP_KERNEL, "Knights Landing SrcID#%d_Ha#%d", + pvt->sbridge_dev->source_id, pvt->sbridge_dev->dom); + break; + } + + if (!mci->ctl_name) { + rc = -ENOMEM; + goto fail0; + } + + /* Get dimm basic config and the memory layout */ + rc = get_dimm_config(mci); + if (rc < 0) { + edac_dbg(0, "MC: failed to get_dimm_config()\n"); + goto fail; + } + get_memory_layout(mci); + + /* record ptr to the generic device */ + mci->pdev = &pdev->dev; + + /* add this new MC control structure to EDAC's list of MCs */ + if (unlikely(edac_mc_add_mc(mci))) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + rc = -EINVAL; + goto fail; + } + + return 0; + +fail: + kfree(mci->ctl_name); +fail0: + edac_mc_free(mci); + sbridge_dev->mci = NULL; + return rc; +} + +static const struct x86_cpu_id sbridge_cpuids[] = { + X86_MATCH_INTEL_FAM6_MODEL(SANDYBRIDGE_X, &pci_dev_descr_sbridge_table), + X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X, &pci_dev_descr_ibridge_table), + X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, &pci_dev_descr_haswell_table), + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, &pci_dev_descr_broadwell_table), + X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, &pci_dev_descr_broadwell_table), + X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &pci_dev_descr_knl_table), + X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &pci_dev_descr_knl_table), + { } +}; +MODULE_DEVICE_TABLE(x86cpu, sbridge_cpuids); + +/* + * sbridge_probe Get all devices and register memory controllers + * present. + * return: + * 0 for FOUND a device + * < 0 for error code + */ + +static int sbridge_probe(const struct x86_cpu_id *id) +{ + int rc; + u8 mc, num_mc = 0; + struct sbridge_dev *sbridge_dev; + struct pci_id_table *ptable = (struct pci_id_table *)id->driver_data; + + /* get the pci devices we want to reserve for our use */ + rc = sbridge_get_all_devices(&num_mc, ptable); + + if (unlikely(rc < 0)) { + edac_dbg(0, "couldn't get all devices\n"); + goto fail0; + } + + mc = 0; + + list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) { + edac_dbg(0, "Registering MC#%d (%d of %d)\n", + mc, mc + 1, num_mc); + + sbridge_dev->mc = mc++; + rc = sbridge_register_mci(sbridge_dev, ptable->type); + if (unlikely(rc < 0)) + goto fail1; + } + + sbridge_printk(KERN_INFO, "%s\n", SBRIDGE_REVISION); + + return 0; + +fail1: + list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) + sbridge_unregister_mci(sbridge_dev); + + sbridge_put_all_devices(); +fail0: + return rc; +} + +/* + * sbridge_remove cleanup + * + */ +static void sbridge_remove(void) +{ + struct sbridge_dev *sbridge_dev; + + edac_dbg(0, "\n"); + + list_for_each_entry(sbridge_dev, &sbridge_edac_list, list) + sbridge_unregister_mci(sbridge_dev); + + /* Release PCI resources */ + sbridge_put_all_devices(); +} + +/* + * sbridge_init Module entry function + * Try to initialize this module for its devices + */ +static int __init sbridge_init(void) +{ + const struct x86_cpu_id *id; + const char *owner; + int rc; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + id = x86_match_cpu(sbridge_cpuids); + if (!id) + return -ENODEV; + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + rc = sbridge_probe(id); + + if (rc >= 0) { + mce_register_decode_chain(&sbridge_mce_dec); + return 0; + } + + sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n", + rc); + + return rc; +} + +/* + * sbridge_exit() Module exit function + * Unregister the driver + */ +static void __exit sbridge_exit(void) +{ + edac_dbg(2, "\n"); + sbridge_remove(); + mce_unregister_decode_chain(&sbridge_mce_dec); +} + +module_init(sbridge_init); +module_exit(sbridge_exit); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_AUTHOR("Red Hat Inc. (https://www.redhat.com)"); +MODULE_DESCRIPTION("MC Driver for Intel Sandy Bridge and Ivy Bridge memory controllers - " + SBRIDGE_REVISION); diff --git a/drivers/edac/sifive_edac.c b/drivers/edac/sifive_edac.c new file mode 100644 index 000000000..b844e2626 --- /dev/null +++ b/drivers/edac/sifive_edac.c @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SiFive Platform EDAC Driver + * + * Copyright (C) 2018-2022 SiFive, Inc. + * + * This driver is partially based on octeon_edac-pc.c + * + */ +#include <linux/edac.h> +#include <linux/platform_device.h> +#include "edac_module.h" +#include <soc/sifive/sifive_ccache.h> + +#define DRVNAME "sifive_edac" + +struct sifive_edac_priv { + struct notifier_block notifier; + struct edac_device_ctl_info *dci; +}; + +/* + * EDAC error callback + * + * @event: non-zero if unrecoverable. + */ +static +int ecc_err_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + const char *msg = (char *)ptr; + struct sifive_edac_priv *p; + + p = container_of(this, struct sifive_edac_priv, notifier); + + if (event == SIFIVE_CCACHE_ERR_TYPE_UE) + edac_device_handle_ue(p->dci, 0, 0, msg); + else if (event == SIFIVE_CCACHE_ERR_TYPE_CE) + edac_device_handle_ce(p->dci, 0, 0, msg); + + return NOTIFY_OK; +} + +static int ecc_register(struct platform_device *pdev) +{ + struct sifive_edac_priv *p; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->notifier.notifier_call = ecc_err_event; + platform_set_drvdata(pdev, p); + + p->dci = edac_device_alloc_ctl_info(0, "sifive_ecc", 1, "sifive_ecc", + 1, 1, NULL, 0, + edac_device_alloc_index()); + if (!p->dci) + return -ENOMEM; + + p->dci->dev = &pdev->dev; + p->dci->mod_name = "Sifive ECC Manager"; + p->dci->ctl_name = dev_name(&pdev->dev); + p->dci->dev_name = dev_name(&pdev->dev); + + if (edac_device_add_device(p->dci)) { + dev_err(p->dci->dev, "failed to register with EDAC core\n"); + goto err; + } + + register_sifive_ccache_error_notifier(&p->notifier); + + return 0; + +err: + edac_device_free_ctl_info(p->dci); + + return -ENXIO; +} + +static int ecc_unregister(struct platform_device *pdev) +{ + struct sifive_edac_priv *p = platform_get_drvdata(pdev); + + unregister_sifive_ccache_error_notifier(&p->notifier); + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(p->dci); + + return 0; +} + +static struct platform_device *sifive_pdev; + +static int __init sifive_edac_init(void) +{ + int ret; + + sifive_pdev = platform_device_register_simple(DRVNAME, 0, NULL, 0); + if (IS_ERR(sifive_pdev)) + return PTR_ERR(sifive_pdev); + + ret = ecc_register(sifive_pdev); + if (ret) + platform_device_unregister(sifive_pdev); + + return ret; +} + +static void __exit sifive_edac_exit(void) +{ + ecc_unregister(sifive_pdev); + platform_device_unregister(sifive_pdev); +} + +module_init(sifive_edac_init); +module_exit(sifive_edac_exit); + +MODULE_AUTHOR("SiFive Inc."); +MODULE_DESCRIPTION("SiFive platform EDAC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c new file mode 100644 index 000000000..bc399469e --- /dev/null +++ b/drivers/edac/skx_base.c @@ -0,0 +1,756 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * EDAC driver for Intel(R) Xeon(R) Skylake processors + * Copyright (c) 2016, Intel Corporation. + */ + +#include <linux/kernel.h> +#include <linux/processor.h> +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/mce.h> + +#include "edac_module.h" +#include "skx_common.h" + +#define EDAC_MOD_STR "skx_edac" + +/* + * Debug macros + */ +#define skx_printk(level, fmt, arg...) \ + edac_printk(level, "skx", fmt, ##arg) + +#define skx_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg) + +static struct list_head *skx_edac_list; + +static u64 skx_tolm, skx_tohm; +static int skx_num_sockets; +static unsigned int nvdimm_count; + +#define MASK26 0x3FFFFFF /* Mask for 2^26 */ +#define MASK29 0x1FFFFFFF /* Mask for 2^29 */ + +static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx) +{ + struct skx_dev *d; + + list_for_each_entry(d, skx_edac_list, list) { + if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number) + return d; + } + + return NULL; +} + +enum munittype { + CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD, + ERRCHAN0, ERRCHAN1, ERRCHAN2, +}; + +struct munit { + u16 did; + u16 devfn[SKX_NUM_IMC]; + u8 busidx; + u8 per_socket; + enum munittype mtype; +}; + +/* + * List of PCI device ids that we need together with some device + * number and function numbers to tell which memory controller the + * device belongs to. + */ +static const struct munit skx_all_munits[] = { + { 0x2054, { }, 1, 1, SAD_ALL }, + { 0x2055, { }, 1, 1, UTIL_ALL }, + { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 }, + { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 }, + { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 }, + { 0x2043, { PCI_DEVFN(10, 3), PCI_DEVFN(12, 3) }, 2, 2, ERRCHAN0 }, + { 0x2047, { PCI_DEVFN(10, 7), PCI_DEVFN(12, 7) }, 2, 2, ERRCHAN1 }, + { 0x204b, { PCI_DEVFN(11, 3), PCI_DEVFN(13, 3) }, 2, 2, ERRCHAN2 }, + { 0x208e, { }, 1, 0, SAD }, + { } +}; + +static int get_all_munits(const struct munit *m) +{ + struct pci_dev *pdev, *prev; + struct skx_dev *d; + u32 reg; + int i = 0, ndev = 0; + + prev = NULL; + for (;;) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev); + if (!pdev) + break; + ndev++; + if (m->per_socket == SKX_NUM_IMC) { + for (i = 0; i < SKX_NUM_IMC; i++) + if (m->devfn[i] == pdev->devfn) + break; + if (i == SKX_NUM_IMC) + goto fail; + } + d = get_skx_dev(pdev->bus, m->busidx); + if (!d) + goto fail; + + /* Be sure that the device is enabled */ + if (unlikely(pci_enable_device(pdev) < 0)) { + skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n", + PCI_VENDOR_ID_INTEL, m->did); + goto fail; + } + + switch (m->mtype) { + case CHAN0: + case CHAN1: + case CHAN2: + pci_dev_get(pdev); + d->imc[i].chan[m->mtype].cdev = pdev; + break; + case ERRCHAN0: + case ERRCHAN1: + case ERRCHAN2: + pci_dev_get(pdev); + d->imc[i].chan[m->mtype - ERRCHAN0].edev = pdev; + break; + case SAD_ALL: + pci_dev_get(pdev); + d->sad_all = pdev; + break; + case UTIL_ALL: + pci_dev_get(pdev); + d->util_all = pdev; + break; + case SAD: + /* + * one of these devices per core, including cores + * that don't exist on this SKU. Ignore any that + * read a route table of zero, make sure all the + * non-zero values match. + */ + pci_read_config_dword(pdev, 0xB4, ®); + if (reg != 0) { + if (d->mcroute == 0) { + d->mcroute = reg; + } else if (d->mcroute != reg) { + skx_printk(KERN_ERR, "mcroute mismatch\n"); + goto fail; + } + } + ndev--; + break; + } + + prev = pdev; + } + + return ndev; +fail: + pci_dev_put(pdev); + return -ENODEV; +} + +static struct res_config skx_cfg = { + .type = SKX, + .decs_did = 0x2016, + .busno_cfg_offset = 0xcc, +}; + +static const struct x86_cpu_id skx_cpuids[] = { + X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(SKYLAKE_X, X86_STEPPINGS(0x0, 0xf), &skx_cfg), + { } +}; +MODULE_DEVICE_TABLE(x86cpu, skx_cpuids); + +static bool skx_check_ecc(u32 mcmtr) +{ + return !!GET_BITFIELD(mcmtr, 2, 2); +} + +static int skx_get_dimm_config(struct mem_ctl_info *mci, struct res_config *cfg) +{ + struct skx_pvt *pvt = mci->pvt_info; + u32 mtr, mcmtr, amap, mcddrtcfg; + struct skx_imc *imc = pvt->imc; + struct dimm_info *dimm; + int i, j; + int ndimms; + + /* Only the mcmtr on the first channel is effective */ + pci_read_config_dword(imc->chan[0].cdev, 0x87c, &mcmtr); + + for (i = 0; i < SKX_NUM_CHANNELS; i++) { + ndimms = 0; + pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap); + pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg); + for (j = 0; j < SKX_NUM_DIMMS; j++) { + dimm = edac_get_dimm(mci, i, j, 0); + pci_read_config_dword(imc->chan[i].cdev, + 0x80 + 4 * j, &mtr); + if (IS_DIMM_PRESENT(mtr)) { + ndimms += skx_get_dimm_info(mtr, mcmtr, amap, dimm, imc, i, j, cfg); + } else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) { + ndimms += skx_get_nvdimm_info(dimm, imc, i, j, + EDAC_MOD_STR); + nvdimm_count++; + } + } + if (ndimms && !skx_check_ecc(mcmtr)) { + skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc); + return -ENODEV; + } + } + + return 0; +} + +#define SKX_MAX_SAD 24 + +#define SKX_GET_SAD(d, i, reg) \ + pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &(reg)) +#define SKX_GET_ILV(d, i, reg) \ + pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &(reg)) + +#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31) +#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27) +#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26) +#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6) +#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4) +#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2) +#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0) + +#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0) +#define SKX_ILV_TARGET(tgt) ((tgt) & 7) + +static void skx_show_retry_rd_err_log(struct decoded_addr *res, + char *msg, int len, + bool scrub_err) +{ + u32 log0, log1, log2, log3, log4; + u32 corr0, corr1, corr2, corr3; + struct pci_dev *edev; + int n; + + edev = res->dev->imc[res->imc].chan[res->channel].edev; + + pci_read_config_dword(edev, 0x154, &log0); + pci_read_config_dword(edev, 0x148, &log1); + pci_read_config_dword(edev, 0x150, &log2); + pci_read_config_dword(edev, 0x15c, &log3); + pci_read_config_dword(edev, 0x114, &log4); + + n = snprintf(msg, len, " retry_rd_err_log[%.8x %.8x %.8x %.8x %.8x]", + log0, log1, log2, log3, log4); + + pci_read_config_dword(edev, 0x104, &corr0); + pci_read_config_dword(edev, 0x108, &corr1); + pci_read_config_dword(edev, 0x10c, &corr2); + pci_read_config_dword(edev, 0x110, &corr3); + + if (len - n > 0) + snprintf(msg + n, len - n, + " correrrcnt[%.4x %.4x %.4x %.4x %.4x %.4x %.4x %.4x]", + corr0 & 0xffff, corr0 >> 16, + corr1 & 0xffff, corr1 >> 16, + corr2 & 0xffff, corr2 >> 16, + corr3 & 0xffff, corr3 >> 16); +} + +static bool skx_sad_decode(struct decoded_addr *res) +{ + struct skx_dev *d = list_first_entry(skx_edac_list, typeof(*d), list); + u64 addr = res->addr; + int i, idx, tgt, lchan, shift; + u32 sad, ilv; + u64 limit, prev_limit; + int remote = 0; + + /* Simple sanity check for I/O space or out of range */ + if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) { + edac_dbg(0, "Address 0x%llx out of range\n", addr); + return false; + } + +restart: + prev_limit = 0; + for (i = 0; i < SKX_MAX_SAD; i++) { + SKX_GET_SAD(d, i, sad); + limit = SKX_SAD_LIMIT(sad); + if (SKX_SAD_ENABLE(sad)) { + if (addr >= prev_limit && addr <= limit) + goto sad_found; + } + prev_limit = limit + 1; + } + edac_dbg(0, "No SAD entry for 0x%llx\n", addr); + return false; + +sad_found: + SKX_GET_ILV(d, i, ilv); + + switch (SKX_SAD_INTERLEAVE(sad)) { + case 0: + idx = GET_BITFIELD(addr, 6, 8); + break; + case 1: + idx = GET_BITFIELD(addr, 8, 10); + break; + case 2: + idx = GET_BITFIELD(addr, 12, 14); + break; + case 3: + idx = GET_BITFIELD(addr, 30, 32); + break; + } + + tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3); + + /* If point to another node, find it and start over */ + if (SKX_ILV_REMOTE(tgt)) { + if (remote) { + edac_dbg(0, "Double remote!\n"); + return false; + } + remote = 1; + list_for_each_entry(d, skx_edac_list, list) { + if (d->imc[0].src_id == SKX_ILV_TARGET(tgt)) + goto restart; + } + edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt)); + return false; + } + + if (SKX_SAD_MOD3(sad) == 0) { + lchan = SKX_ILV_TARGET(tgt); + } else { + switch (SKX_SAD_MOD3MODE(sad)) { + case 0: + shift = 6; + break; + case 1: + shift = 8; + break; + case 2: + shift = 12; + break; + default: + edac_dbg(0, "illegal mod3mode\n"); + return false; + } + switch (SKX_SAD_MOD3ASMOD2(sad)) { + case 0: + lchan = (addr >> shift) % 3; + break; + case 1: + lchan = (addr >> shift) % 2; + break; + case 2: + lchan = (addr >> shift) % 2; + lchan = (lchan << 1) | !lchan; + break; + case 3: + lchan = ((addr >> shift) % 2) << 1; + break; + } + lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1); + } + + res->dev = d; + res->socket = d->imc[0].src_id; + res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2); + res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19); + + edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n", + res->addr, res->socket, res->imc, res->channel); + return true; +} + +#define SKX_MAX_TAD 8 + +#define SKX_GET_TADBASE(d, mc, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &(reg)) +#define SKX_GET_TADWAYNESS(d, mc, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &(reg)) +#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &(reg)) + +#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26) +#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5) +#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7) +#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26) +#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26) +#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11)) +#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1) + +/* which bit used for both socket and channel interleave */ +static int skx_granularity[] = { 6, 8, 12, 30 }; + +static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits) +{ + addr >>= shift; + addr /= ways; + addr <<= shift; + + return addr | (lowbits & ((1ull << shift) - 1)); +} + +static bool skx_tad_decode(struct decoded_addr *res) +{ + int i; + u32 base, wayness, chnilvoffset; + int skt_interleave_bit, chn_interleave_bit; + u64 channel_addr; + + for (i = 0; i < SKX_MAX_TAD; i++) { + SKX_GET_TADBASE(res->dev, res->imc, i, base); + SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness); + if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness)) + goto tad_found; + } + edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr); + return false; + +tad_found: + res->sktways = SKX_TAD_SKTWAYS(wayness); + res->chanways = SKX_TAD_CHNWAYS(wayness); + skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)]; + chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)]; + + SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset); + channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset); + + if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) { + /* Must handle channel first, then socket */ + channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, + res->chanways, channel_addr); + channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, + res->sktways, channel_addr); + } else { + /* Handle socket then channel. Preserve low bits from original address */ + channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit, + res->sktways, res->addr); + channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit, + res->chanways, res->addr); + } + + res->chan_addr = channel_addr; + + edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n", + res->addr, res->chan_addr, res->sktways, res->chanways); + return true; +} + +#define SKX_MAX_RIR 4 + +#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ + 0x108 + 4 * (i), &(reg)) +#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \ + pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \ + 0x120 + 16 * (idx) + 4 * (i), &(reg)) + +#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31) +#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29) +#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29)) +#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19) +#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26)) + +static bool skx_rir_decode(struct decoded_addr *res) +{ + int i, idx, chan_rank; + int shift; + u32 rirway, rirlv; + u64 rank_addr, prev_limit = 0, limit; + + if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg) + shift = 6; + else + shift = 13; + + for (i = 0; i < SKX_MAX_RIR; i++) { + SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway); + limit = SKX_RIR_LIMIT(rirway); + if (SKX_RIR_VALID(rirway)) { + if (prev_limit <= res->chan_addr && + res->chan_addr <= limit) + goto rir_found; + } + prev_limit = limit; + } + edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr); + return false; + +rir_found: + rank_addr = res->chan_addr >> shift; + rank_addr /= SKX_RIR_WAYS(rirway); + rank_addr <<= shift; + rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0); + + res->rank_address = rank_addr; + idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway); + + SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv); + res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv); + chan_rank = SKX_RIR_CHAN_RANK(rirlv); + res->channel_rank = chan_rank; + res->dimm = chan_rank / 4; + res->rank = chan_rank % 4; + + edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n", + res->addr, res->dimm, res->rank, + res->channel_rank, res->rank_address); + return true; +} + +static u8 skx_close_row[] = { + 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33, 34 +}; + +static u8 skx_close_column[] = { + 3, 4, 5, 14, 19, 23, 24, 25, 26, 27 +}; + +static u8 skx_open_row[] = { + 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34 +}; + +static u8 skx_open_column[] = { + 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 +}; + +static u8 skx_open_fine_column[] = { + 3, 4, 5, 7, 8, 9, 10, 11, 12, 13 +}; + +static int skx_bits(u64 addr, int nbits, u8 *bits) +{ + int i, res = 0; + + for (i = 0; i < nbits; i++) + res |= ((addr >> bits[i]) & 1) << i; + return res; +} + +static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1) +{ + int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1); + + if (do_xor) + ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1); + + return ret; +} + +static bool skx_mad_decode(struct decoded_addr *r) +{ + struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm]; + int bg0 = dimm->fine_grain_bank ? 6 : 13; + + if (dimm->close_pg) { + r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row); + r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column); + r->column |= 0x400; /* C10 is autoprecharge, always set */ + r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28); + r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21); + } else { + r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row); + if (dimm->fine_grain_bank) + r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column); + else + r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column); + r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23); + r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21); + } + r->row &= (1u << dimm->rowbits) - 1; + + edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n", + r->addr, r->row, r->column, r->bank_address, + r->bank_group); + return true; +} + +static bool skx_decode(struct decoded_addr *res) +{ + return skx_sad_decode(res) && skx_tad_decode(res) && + skx_rir_decode(res) && skx_mad_decode(res); +} + +static struct notifier_block skx_mce_dec = { + .notifier_call = skx_mce_check_error, + .priority = MCE_PRIO_EDAC, +}; + +#ifdef CONFIG_EDAC_DEBUG +/* + * Debug feature. + * Exercise the address decode logic by writing an address to + * /sys/kernel/debug/edac/skx_test/addr. + */ +static struct dentry *skx_test; + +static int debugfs_u64_set(void *data, u64 val) +{ + struct mce m; + + pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); + + memset(&m, 0, sizeof(m)); + /* ADDRV + MemRd + Unknown channel */ + m.status = MCI_STATUS_ADDRV + 0x90; + /* One corrected error */ + m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT); + m.addr = val; + skx_mce_check_error(NULL, 0, &m); + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); + +static void setup_skx_debug(void) +{ + skx_test = edac_debugfs_create_dir("skx_test"); + if (!skx_test) + return; + + if (!edac_debugfs_create_file("addr", 0200, skx_test, + NULL, &fops_u64_wo)) { + debugfs_remove(skx_test); + skx_test = NULL; + } +} + +static void teardown_skx_debug(void) +{ + debugfs_remove_recursive(skx_test); +} +#else +static inline void setup_skx_debug(void) {} +static inline void teardown_skx_debug(void) {} +#endif /*CONFIG_EDAC_DEBUG*/ + +/* + * skx_init: + * make sure we are running on the correct cpu model + * search for all the devices we need + * check which DIMMs are present. + */ +static int __init skx_init(void) +{ + const struct x86_cpu_id *id; + struct res_config *cfg; + const struct munit *m; + const char *owner; + int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8}; + u8 mc = 0, src_id, node_id; + struct skx_dev *d; + + edac_dbg(2, "\n"); + + owner = edac_get_owner(); + if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR))) + return -EBUSY; + + if (cpu_feature_enabled(X86_FEATURE_HYPERVISOR)) + return -ENODEV; + + id = x86_match_cpu(skx_cpuids); + if (!id) + return -ENODEV; + + cfg = (struct res_config *)id->driver_data; + + rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm); + if (rc) + return rc; + + rc = skx_get_all_bus_mappings(cfg, &skx_edac_list); + if (rc < 0) + goto fail; + if (rc == 0) { + edac_dbg(2, "No memory controllers found\n"); + return -ENODEV; + } + skx_num_sockets = rc; + + for (m = skx_all_munits; m->did; m++) { + rc = get_all_munits(m); + if (rc < 0) + goto fail; + if (rc != m->per_socket * skx_num_sockets) { + edac_dbg(2, "Expected %d, got %d of 0x%x\n", + m->per_socket * skx_num_sockets, rc, m->did); + rc = -ENODEV; + goto fail; + } + } + + list_for_each_entry(d, skx_edac_list, list) { + rc = skx_get_src_id(d, 0xf0, &src_id); + if (rc < 0) + goto fail; + rc = skx_get_node_id(d, &node_id); + if (rc < 0) + goto fail; + edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id); + for (i = 0; i < SKX_NUM_IMC; i++) { + d->imc[i].mc = mc++; + d->imc[i].lmc = i; + d->imc[i].src_id = src_id; + d->imc[i].node_id = node_id; + rc = skx_register_mci(&d->imc[i], d->imc[i].chan[0].cdev, + "Skylake Socket", EDAC_MOD_STR, + skx_get_dimm_config, cfg); + if (rc < 0) + goto fail; + } + } + + skx_set_decode(skx_decode, skx_show_retry_rd_err_log); + + if (nvdimm_count && skx_adxl_get() != -ENODEV) { + skx_set_decode(NULL, skx_show_retry_rd_err_log); + } else { + if (nvdimm_count) + skx_printk(KERN_NOTICE, "Only decoding DDR4 address!\n"); + skx_set_decode(skx_decode, skx_show_retry_rd_err_log); + } + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + setup_skx_debug(); + + mce_register_decode_chain(&skx_mce_dec); + + return 0; +fail: + skx_remove(); + return rc; +} + +static void __exit skx_exit(void) +{ + edac_dbg(2, "\n"); + mce_unregister_decode_chain(&skx_mce_dec); + teardown_skx_debug(); + if (nvdimm_count) + skx_adxl_put(); + skx_remove(); +} + +module_init(skx_init); +module_exit(skx_exit); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Tony Luck"); +MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors"); diff --git a/drivers/edac/skx_common.c b/drivers/edac/skx_common.c new file mode 100644 index 000000000..f0f8e98f6 --- /dev/null +++ b/drivers/edac/skx_common.c @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * + * Shared code by both skx_edac and i10nm_edac. Originally split out + * from the skx_edac driver. + * + * This file is linked into both skx_edac and i10nm_edac drivers. In + * order to avoid link errors, this file must be like a pure library + * without including symbols and defines which would otherwise conflict, + * when linked once into a module and into a built-in object, at the + * same time. For example, __this_module symbol references when that + * file is being linked into a built-in object. + * + * Copyright (c) 2018, Intel Corporation. + */ + +#include <linux/acpi.h> +#include <linux/dmi.h> +#include <linux/adxl.h> +#include <acpi/nfit.h> +#include <asm/mce.h> +#include "edac_module.h" +#include "skx_common.h" + +static const char * const component_names[] = { + [INDEX_SOCKET] = "ProcessorSocketId", + [INDEX_MEMCTRL] = "MemoryControllerId", + [INDEX_CHANNEL] = "ChannelId", + [INDEX_DIMM] = "DimmSlotId", + [INDEX_CS] = "ChipSelect", + [INDEX_NM_MEMCTRL] = "NmMemoryControllerId", + [INDEX_NM_CHANNEL] = "NmChannelId", + [INDEX_NM_DIMM] = "NmDimmSlotId", + [INDEX_NM_CS] = "NmChipSelect", +}; + +static int component_indices[ARRAY_SIZE(component_names)]; +static int adxl_component_count; +static const char * const *adxl_component_names; +static u64 *adxl_values; +static char *adxl_msg; +static unsigned long adxl_nm_bitmap; + +static char skx_msg[MSG_SIZE]; +static skx_decode_f driver_decode; +static skx_show_retry_log_f skx_show_retry_rd_err_log; +static u64 skx_tolm, skx_tohm; +static LIST_HEAD(dev_edac_list); +static bool skx_mem_cfg_2lm; + +int __init skx_adxl_get(void) +{ + const char * const *names; + int i, j; + + names = adxl_get_component_names(); + if (!names) { + skx_printk(KERN_NOTICE, "No firmware support for address translation.\n"); + return -ENODEV; + } + + for (i = 0; i < INDEX_MAX; i++) { + for (j = 0; names[j]; j++) { + if (!strcmp(component_names[i], names[j])) { + component_indices[i] = j; + + if (i >= INDEX_NM_FIRST) + adxl_nm_bitmap |= 1 << i; + + break; + } + } + + if (!names[j] && i < INDEX_NM_FIRST) + goto err; + } + + if (skx_mem_cfg_2lm) { + if (!adxl_nm_bitmap) + skx_printk(KERN_NOTICE, "Not enough ADXL components for 2-level memory.\n"); + else + edac_dbg(2, "adxl_nm_bitmap: 0x%lx\n", adxl_nm_bitmap); + } + + adxl_component_names = names; + while (*names++) + adxl_component_count++; + + adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values), + GFP_KERNEL); + if (!adxl_values) { + adxl_component_count = 0; + return -ENOMEM; + } + + adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL); + if (!adxl_msg) { + adxl_component_count = 0; + kfree(adxl_values); + return -ENOMEM; + } + + return 0; +err: + skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ", + component_names[i]); + for (j = 0; names[j]; j++) + skx_printk(KERN_CONT, "%s ", names[j]); + skx_printk(KERN_CONT, "\n"); + + return -ENODEV; +} + +void __exit skx_adxl_put(void) +{ + kfree(adxl_values); + kfree(adxl_msg); +} + +static bool skx_adxl_decode(struct decoded_addr *res, bool error_in_1st_level_mem) +{ + struct skx_dev *d; + int i, len = 0; + + if (res->addr >= skx_tohm || (res->addr >= skx_tolm && + res->addr < BIT_ULL(32))) { + edac_dbg(0, "Address 0x%llx out of range\n", res->addr); + return false; + } + + if (adxl_decode(res->addr, adxl_values)) { + edac_dbg(0, "Failed to decode 0x%llx\n", res->addr); + return false; + } + + res->socket = (int)adxl_values[component_indices[INDEX_SOCKET]]; + if (error_in_1st_level_mem) { + res->imc = (adxl_nm_bitmap & BIT_NM_MEMCTRL) ? + (int)adxl_values[component_indices[INDEX_NM_MEMCTRL]] : -1; + res->channel = (adxl_nm_bitmap & BIT_NM_CHANNEL) ? + (int)adxl_values[component_indices[INDEX_NM_CHANNEL]] : -1; + res->dimm = (adxl_nm_bitmap & BIT_NM_DIMM) ? + (int)adxl_values[component_indices[INDEX_NM_DIMM]] : -1; + res->cs = (adxl_nm_bitmap & BIT_NM_CS) ? + (int)adxl_values[component_indices[INDEX_NM_CS]] : -1; + } else { + res->imc = (int)adxl_values[component_indices[INDEX_MEMCTRL]]; + res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]]; + res->dimm = (int)adxl_values[component_indices[INDEX_DIMM]]; + res->cs = (int)adxl_values[component_indices[INDEX_CS]]; + } + + if (res->imc > NUM_IMC - 1 || res->imc < 0) { + skx_printk(KERN_ERR, "Bad imc %d\n", res->imc); + return false; + } + + list_for_each_entry(d, &dev_edac_list, list) { + if (d->imc[0].src_id == res->socket) { + res->dev = d; + break; + } + } + + if (!res->dev) { + skx_printk(KERN_ERR, "No device for src_id %d imc %d\n", + res->socket, res->imc); + return false; + } + + for (i = 0; i < adxl_component_count; i++) { + if (adxl_values[i] == ~0x0ull) + continue; + + len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx", + adxl_component_names[i], adxl_values[i]); + if (MSG_SIZE - len <= 0) + break; + } + + res->decoded_by_adxl = true; + + return true; +} + +void skx_set_mem_cfg(bool mem_cfg_2lm) +{ + skx_mem_cfg_2lm = mem_cfg_2lm; +} + +void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log) +{ + driver_decode = decode; + skx_show_retry_rd_err_log = show_retry_log; +} + +int skx_get_src_id(struct skx_dev *d, int off, u8 *id) +{ + u32 reg; + + if (pci_read_config_dword(d->util_all, off, ®)) { + skx_printk(KERN_ERR, "Failed to read src id\n"); + return -ENODEV; + } + + *id = GET_BITFIELD(reg, 12, 14); + return 0; +} + +int skx_get_node_id(struct skx_dev *d, u8 *id) +{ + u32 reg; + + if (pci_read_config_dword(d->util_all, 0xf4, ®)) { + skx_printk(KERN_ERR, "Failed to read node id\n"); + return -ENODEV; + } + + *id = GET_BITFIELD(reg, 0, 2); + return 0; +} + +static int get_width(u32 mtr) +{ + switch (GET_BITFIELD(mtr, 8, 9)) { + case 0: + return DEV_X4; + case 1: + return DEV_X8; + case 2: + return DEV_X16; + } + return DEV_UNKNOWN; +} + +/* + * We use the per-socket device @cfg->did to count how many sockets are present, + * and to detemine which PCI buses are associated with each socket. Allocate + * and build the full list of all the skx_dev structures that we need here. + */ +int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list) +{ + struct pci_dev *pdev, *prev; + struct skx_dev *d; + u32 reg; + int ndev = 0; + + prev = NULL; + for (;;) { + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, cfg->decs_did, prev); + if (!pdev) + break; + ndev++; + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + pci_dev_put(pdev); + return -ENOMEM; + } + + if (pci_read_config_dword(pdev, cfg->busno_cfg_offset, ®)) { + kfree(d); + pci_dev_put(pdev); + skx_printk(KERN_ERR, "Failed to read bus idx\n"); + return -ENODEV; + } + + d->bus[0] = GET_BITFIELD(reg, 0, 7); + d->bus[1] = GET_BITFIELD(reg, 8, 15); + if (cfg->type == SKX) { + d->seg = pci_domain_nr(pdev->bus); + d->bus[2] = GET_BITFIELD(reg, 16, 23); + d->bus[3] = GET_BITFIELD(reg, 24, 31); + } else { + d->seg = GET_BITFIELD(reg, 16, 23); + } + + edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n", + d->bus[0], d->bus[1], d->bus[2], d->bus[3]); + list_add_tail(&d->list, &dev_edac_list); + prev = pdev; + } + + if (list) + *list = &dev_edac_list; + return ndev; +} + +int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm) +{ + struct pci_dev *pdev; + u32 reg; + + pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, NULL); + if (!pdev) { + edac_dbg(2, "Can't get tolm/tohm\n"); + return -ENODEV; + } + + if (pci_read_config_dword(pdev, off[0], ®)) { + skx_printk(KERN_ERR, "Failed to read tolm\n"); + goto fail; + } + skx_tolm = reg; + + if (pci_read_config_dword(pdev, off[1], ®)) { + skx_printk(KERN_ERR, "Failed to read lower tohm\n"); + goto fail; + } + skx_tohm = reg; + + if (pci_read_config_dword(pdev, off[2], ®)) { + skx_printk(KERN_ERR, "Failed to read upper tohm\n"); + goto fail; + } + skx_tohm |= (u64)reg << 32; + + pci_dev_put(pdev); + *tolm = skx_tolm; + *tohm = skx_tohm; + edac_dbg(2, "tolm = 0x%llx tohm = 0x%llx\n", skx_tolm, skx_tohm); + return 0; +fail: + pci_dev_put(pdev); + return -ENODEV; +} + +static int skx_get_dimm_attr(u32 reg, int lobit, int hibit, int add, + int minval, int maxval, const char *name) +{ + u32 val = GET_BITFIELD(reg, lobit, hibit); + + if (val < minval || val > maxval) { + edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg); + return -EINVAL; + } + return val + add; +} + +#define numrank(reg) skx_get_dimm_attr(reg, 12, 13, 0, 0, 2, "ranks") +#define numrow(reg) skx_get_dimm_attr(reg, 2, 4, 12, 1, 6, "rows") +#define numcol(reg) skx_get_dimm_attr(reg, 0, 1, 10, 0, 2, "cols") + +int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm, + struct skx_imc *imc, int chan, int dimmno, + struct res_config *cfg) +{ + int banks, ranks, rows, cols, npages; + enum mem_type mtype; + u64 size; + + ranks = numrank(mtr); + rows = numrow(mtr); + cols = imc->hbm_mc ? 6 : numcol(mtr); + + if (imc->hbm_mc) { + banks = 32; + mtype = MEM_HBM2; + } else if (cfg->support_ddr5 && (amap & 0x8)) { + banks = 32; + mtype = MEM_DDR5; + } else { + banks = 16; + mtype = MEM_DDR4; + } + + /* + * Compute size in 8-byte (2^3) words, then shift to MiB (2^20) + */ + size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3); + npages = MiB_TO_PAGES(size); + + edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%x, col: 0x%x\n", + imc->mc, chan, dimmno, size, npages, + banks, 1 << ranks, rows, cols); + + imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mcmtr, 0, 0); + imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mcmtr, 9, 9); + imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0); + imc->chan[chan].dimms[dimmno].rowbits = rows; + imc->chan[chan].dimms[dimmno].colbits = cols; + + dimm->nr_pages = npages; + dimm->grain = 32; + dimm->dtype = get_width(mtr); + dimm->mtype = mtype; + dimm->edac_mode = EDAC_SECDED; /* likely better than this */ + + if (imc->hbm_mc) + snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_HBMC#%u_Chan#%u", + imc->src_id, imc->lmc, chan); + else + snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", + imc->src_id, imc->lmc, chan, dimmno); + + return 1; +} + +int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc, + int chan, int dimmno, const char *mod_str) +{ + int smbios_handle; + u32 dev_handle; + u16 flags; + u64 size = 0; + + dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc, + imc->src_id, 0); + + smbios_handle = nfit_get_smbios_id(dev_handle, &flags); + if (smbios_handle == -EOPNOTSUPP) { + pr_warn_once("%s: Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n", mod_str); + goto unknown_size; + } + + if (smbios_handle < 0) { + skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle); + goto unknown_size; + } + + if (flags & ACPI_NFIT_MEM_MAP_FAILED) { + skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle); + goto unknown_size; + } + + size = dmi_memdev_size(smbios_handle); + if (size == ~0ull) + skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n", + dev_handle, smbios_handle); + +unknown_size: + dimm->nr_pages = size >> PAGE_SHIFT; + dimm->grain = 32; + dimm->dtype = DEV_UNKNOWN; + dimm->mtype = MEM_NVDIMM; + dimm->edac_mode = EDAC_SECDED; /* likely better than this */ + + edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n", + imc->mc, chan, dimmno, size >> 20, dimm->nr_pages); + + snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", + imc->src_id, imc->lmc, chan, dimmno); + + return (size == 0 || size == ~0ull) ? 0 : 1; +} + +int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev, + const char *ctl_name, const char *mod_str, + get_dimm_config_f get_dimm_config, + struct res_config *cfg) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct skx_pvt *pvt; + int rc; + + /* Allocate a new MC control structure */ + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = NUM_CHANNELS; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = NUM_DIMMS; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers, + sizeof(struct skx_pvt)); + + if (unlikely(!mci)) + return -ENOMEM; + + edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci); + + /* Associate skx_dev and mci for future usage */ + imc->mci = mci; + pvt = mci->pvt_info; + pvt->imc = imc; + + mci->ctl_name = kasprintf(GFP_KERNEL, "%s#%d IMC#%d", ctl_name, + imc->node_id, imc->lmc); + if (!mci->ctl_name) { + rc = -ENOMEM; + goto fail0; + } + + mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM; + if (cfg->support_ddr5) + mci->mtype_cap |= MEM_FLAG_DDR5; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = mod_str; + mci->dev_name = pci_name(pdev); + mci->ctl_page_to_phys = NULL; + + rc = get_dimm_config(mci, cfg); + if (rc < 0) + goto fail; + + /* Record ptr to the generic device */ + mci->pdev = &pdev->dev; + + /* Add this new MC control structure to EDAC's list of MCs */ + if (unlikely(edac_mc_add_mc(mci))) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + rc = -EINVAL; + goto fail; + } + + return 0; + +fail: + kfree(mci->ctl_name); +fail0: + edac_mc_free(mci); + imc->mci = NULL; + return rc; +} + +static void skx_unregister_mci(struct skx_imc *imc) +{ + struct mem_ctl_info *mci = imc->mci; + + if (!mci) + return; + + edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci); + + /* Remove MC sysfs nodes */ + edac_mc_del_mc(mci->pdev); + + edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); + kfree(mci->ctl_name); + edac_mc_free(mci); +} + +static void skx_mce_output_error(struct mem_ctl_info *mci, + const struct mce *m, + struct decoded_addr *res) +{ + enum hw_event_mc_err_type tp_event; + char *optype; + bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0); + bool overflow = GET_BITFIELD(m->status, 62, 62); + bool uncorrected_error = GET_BITFIELD(m->status, 61, 61); + bool scrub_err = false; + bool recoverable; + int len; + u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); + u32 mscod = GET_BITFIELD(m->status, 16, 31); + u32 errcode = GET_BITFIELD(m->status, 0, 15); + u32 optypenum = GET_BITFIELD(m->status, 4, 6); + + recoverable = GET_BITFIELD(m->status, 56, 56); + + if (uncorrected_error) { + core_err_cnt = 1; + if (ripv) { + tp_event = HW_EVENT_ERR_UNCORRECTED; + } else { + tp_event = HW_EVENT_ERR_FATAL; + } + } else { + tp_event = HW_EVENT_ERR_CORRECTED; + } + + /* + * According to Intel Architecture spec vol 3B, + * Table 15-10 "IA32_MCi_Status [15:0] Compound Error Code Encoding" + * memory errors should fit one of these masks: + * 000f 0000 1mmm cccc (binary) + * 000f 0010 1mmm cccc (binary) [RAM used as cache] + * where: + * f = Correction Report Filtering Bit. If 1, subsequent errors + * won't be shown + * mmm = error type + * cccc = channel + * If the mask doesn't match, report an error to the parsing logic + */ + if (!((errcode & 0xef80) == 0x80 || (errcode & 0xef80) == 0x280)) { + optype = "Can't parse: it is not a mem"; + } else { + switch (optypenum) { + case 0: + optype = "generic undef request error"; + break; + case 1: + optype = "memory read error"; + break; + case 2: + optype = "memory write error"; + break; + case 3: + optype = "addr/cmd error"; + break; + case 4: + optype = "memory scrubbing error"; + scrub_err = true; + break; + default: + optype = "reserved"; + break; + } + } + if (res->decoded_by_adxl) { + len = snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s", + overflow ? " OVERFLOW" : "", + (uncorrected_error && recoverable) ? " recoverable" : "", + mscod, errcode, adxl_msg); + } else { + len = snprintf(skx_msg, MSG_SIZE, + "%s%s err_code:0x%04x:0x%04x ProcessorSocketId:0x%x MemoryControllerId:0x%x PhysicalRankId:0x%x Row:0x%x Column:0x%x Bank:0x%x BankGroup:0x%x", + overflow ? " OVERFLOW" : "", + (uncorrected_error && recoverable) ? " recoverable" : "", + mscod, errcode, + res->socket, res->imc, res->rank, + res->row, res->column, res->bank_address, res->bank_group); + } + + if (skx_show_retry_rd_err_log) + skx_show_retry_rd_err_log(res, skx_msg + len, MSG_SIZE - len, scrub_err); + + edac_dbg(0, "%s\n", skx_msg); + + /* Call the helper to output message */ + edac_mc_handle_error(tp_event, mci, core_err_cnt, + m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, + res->channel, res->dimm, -1, + optype, skx_msg); +} + +static bool skx_error_in_1st_level_mem(const struct mce *m) +{ + u32 errcode; + + if (!skx_mem_cfg_2lm) + return false; + + errcode = GET_BITFIELD(m->status, 0, 15); + + if ((errcode & 0xef80) != 0x280) + return false; + + return true; +} + +int skx_mce_check_error(struct notifier_block *nb, unsigned long val, + void *data) +{ + struct mce *mce = (struct mce *)data; + struct decoded_addr res; + struct mem_ctl_info *mci; + char *type; + + if (mce->kflags & MCE_HANDLED_CEC) + return NOTIFY_DONE; + + /* ignore unless this is memory related with an address */ + if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV)) + return NOTIFY_DONE; + + memset(&res, 0, sizeof(res)); + res.mce = mce; + res.addr = mce->addr; + + /* Try driver decoder first */ + if (!(driver_decode && driver_decode(&res))) { + /* Then try firmware decoder (ACPI DSM methods) */ + if (!(adxl_component_count && skx_adxl_decode(&res, skx_error_in_1st_level_mem(mce)))) + return NOTIFY_DONE; + } + + mci = res.dev->imc[res.imc].mci; + + if (!mci) + return NOTIFY_DONE; + + if (mce->mcgstatus & MCG_STATUS_MCIP) + type = "Exception"; + else + type = "Event"; + + skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n"); + + skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx " + "Bank %d: 0x%llx\n", mce->extcpu, type, + mce->mcgstatus, mce->bank, mce->status); + skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc); + skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr); + skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc); + + skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET " + "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid, + mce->time, mce->socketid, mce->apicid); + + skx_mce_output_error(mci, mce, &res); + + mce->kflags |= MCE_HANDLED_EDAC; + return NOTIFY_DONE; +} + +void skx_remove(void) +{ + int i, j; + struct skx_dev *d, *tmp; + + edac_dbg(0, "\n"); + + list_for_each_entry_safe(d, tmp, &dev_edac_list, list) { + list_del(&d->list); + for (i = 0; i < NUM_IMC; i++) { + if (d->imc[i].mci) + skx_unregister_mci(&d->imc[i]); + + if (d->imc[i].mdev) + pci_dev_put(d->imc[i].mdev); + + if (d->imc[i].mbase) + iounmap(d->imc[i].mbase); + + for (j = 0; j < NUM_CHANNELS; j++) { + if (d->imc[i].chan[j].cdev) + pci_dev_put(d->imc[i].chan[j].cdev); + } + } + if (d->util_all) + pci_dev_put(d->util_all); + if (d->pcu_cr3) + pci_dev_put(d->pcu_cr3); + if (d->sad_all) + pci_dev_put(d->sad_all); + if (d->uracu) + pci_dev_put(d->uracu); + + kfree(d); + } +} diff --git a/drivers/edac/skx_common.h b/drivers/edac/skx_common.h new file mode 100644 index 000000000..0cbadd3d2 --- /dev/null +++ b/drivers/edac/skx_common.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Common codes for both the skx_edac driver and Intel 10nm server EDAC driver. + * Originally split out from the skx_edac driver. + * + * Copyright (c) 2018, Intel Corporation. + */ + +#ifndef _SKX_COMM_EDAC_H +#define _SKX_COMM_EDAC_H + +#include <linux/bits.h> +#include <asm/mce.h> + +#define MSG_SIZE 1024 + +/* + * Debug macros + */ +#define skx_printk(level, fmt, arg...) \ + edac_printk(level, "skx", fmt, ##arg) + +#define skx_mc_printk(mci, level, fmt, arg...) \ + edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg) + +/* + * Get a bit field at register value <v>, from bit <lo> to bit <hi> + */ +#define GET_BITFIELD(v, lo, hi) \ + (((v) & GENMASK_ULL((hi), (lo))) >> (lo)) + +#define SKX_NUM_IMC 2 /* Memory controllers per socket */ +#define SKX_NUM_CHANNELS 3 /* Channels per memory controller */ +#define SKX_NUM_DIMMS 2 /* Max DIMMS per channel */ + +#define I10NM_NUM_DDR_IMC 4 +#define I10NM_NUM_DDR_CHANNELS 2 +#define I10NM_NUM_DDR_DIMMS 2 + +#define I10NM_NUM_HBM_IMC 16 +#define I10NM_NUM_HBM_CHANNELS 2 +#define I10NM_NUM_HBM_DIMMS 1 + +#define I10NM_NUM_IMC (I10NM_NUM_DDR_IMC + I10NM_NUM_HBM_IMC) +#define I10NM_NUM_CHANNELS MAX(I10NM_NUM_DDR_CHANNELS, I10NM_NUM_HBM_CHANNELS) +#define I10NM_NUM_DIMMS MAX(I10NM_NUM_DDR_DIMMS, I10NM_NUM_HBM_DIMMS) + +#define MAX(a, b) ((a) > (b) ? (a) : (b)) +#define NUM_IMC MAX(SKX_NUM_IMC, I10NM_NUM_IMC) +#define NUM_CHANNELS MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS) +#define NUM_DIMMS MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS) + +#define IS_DIMM_PRESENT(r) GET_BITFIELD(r, 15, 15) +#define IS_NVDIMM_PRESENT(r, i) GET_BITFIELD(r, i, i) + +#define MCI_MISC_ECC_MODE(m) (((m) >> 59) & 15) +#define MCI_MISC_ECC_DDRT 8 /* read from DDRT */ + +/* + * Each cpu socket contains some pci devices that provide global + * information, and also some that are local to each of the two + * memory controllers on the die. + */ +struct skx_dev { + struct list_head list; + u8 bus[4]; + int seg; + struct pci_dev *sad_all; + struct pci_dev *util_all; + struct pci_dev *uracu; /* for i10nm CPU */ + struct pci_dev *pcu_cr3; /* for HBM memory detection */ + u32 mcroute; + struct skx_imc { + struct mem_ctl_info *mci; + struct pci_dev *mdev; /* for i10nm CPU */ + void __iomem *mbase; /* for i10nm CPU */ + int chan_mmio_sz; /* for i10nm CPU */ + int num_channels; /* channels per memory controller */ + int num_dimms; /* dimms per channel */ + bool hbm_mc; + u8 mc; /* system wide mc# */ + u8 lmc; /* socket relative mc# */ + u8 src_id, node_id; + struct skx_channel { + struct pci_dev *cdev; + struct pci_dev *edev; + u32 retry_rd_err_log_s; + u32 retry_rd_err_log_d; + u32 retry_rd_err_log_d2; + struct skx_dimm { + u8 close_pg; + u8 bank_xor_enable; + u8 fine_grain_bank; + u8 rowbits; + u8 colbits; + } dimms[NUM_DIMMS]; + } chan[NUM_CHANNELS]; + } imc[NUM_IMC]; +}; + +struct skx_pvt { + struct skx_imc *imc; +}; + +enum type { + SKX, + I10NM, + SPR +}; + +enum { + INDEX_SOCKET, + INDEX_MEMCTRL, + INDEX_CHANNEL, + INDEX_DIMM, + INDEX_CS, + INDEX_NM_FIRST, + INDEX_NM_MEMCTRL = INDEX_NM_FIRST, + INDEX_NM_CHANNEL, + INDEX_NM_DIMM, + INDEX_NM_CS, + INDEX_MAX +}; + +#define BIT_NM_MEMCTRL BIT_ULL(INDEX_NM_MEMCTRL) +#define BIT_NM_CHANNEL BIT_ULL(INDEX_NM_CHANNEL) +#define BIT_NM_DIMM BIT_ULL(INDEX_NM_DIMM) +#define BIT_NM_CS BIT_ULL(INDEX_NM_CS) + +struct decoded_addr { + struct mce *mce; + struct skx_dev *dev; + u64 addr; + int socket; + int imc; + int channel; + u64 chan_addr; + int sktways; + int chanways; + int dimm; + int cs; + int rank; + int channel_rank; + u64 rank_address; + int row; + int column; + int bank_address; + int bank_group; + bool decoded_by_adxl; +}; + +struct res_config { + enum type type; + /* Configuration agent device ID */ + unsigned int decs_did; + /* Default bus number configuration register offset */ + int busno_cfg_offset; + /* Per DDR channel memory-mapped I/O size */ + int ddr_chan_mmio_sz; + /* Per HBM channel memory-mapped I/O size */ + int hbm_chan_mmio_sz; + bool support_ddr5; + /* SAD device number and function number */ + unsigned int sad_all_devfn; + int sad_all_offset; + /* Offsets of retry_rd_err_log registers */ + u32 *offsets_scrub; + u32 *offsets_scrub_hbm0; + u32 *offsets_scrub_hbm1; + u32 *offsets_demand; + u32 *offsets_demand2; + u32 *offsets_demand_hbm0; + u32 *offsets_demand_hbm1; +}; + +typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci, + struct res_config *cfg); +typedef bool (*skx_decode_f)(struct decoded_addr *res); +typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len, bool scrub_err); + +int __init skx_adxl_get(void); +void __exit skx_adxl_put(void); +void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log); +void skx_set_mem_cfg(bool mem_cfg_2lm); + +int skx_get_src_id(struct skx_dev *d, int off, u8 *id); +int skx_get_node_id(struct skx_dev *d, u8 *id); + +int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list); + +int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm); + +int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm, + struct skx_imc *imc, int chan, int dimmno, + struct res_config *cfg); + +int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc, + int chan, int dimmno, const char *mod_str); + +int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev, + const char *ctl_name, const char *mod_str, + get_dimm_config_f get_dimm_config, + struct res_config *cfg); + +int skx_mce_check_error(struct notifier_block *nb, unsigned long val, + void *data); + +void skx_remove(void); + +#endif /* _SKX_COMM_EDAC_H */ diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c new file mode 100644 index 000000000..f7d37c282 --- /dev/null +++ b/drivers/edac/synopsys_edac.c @@ -0,0 +1,1446 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Synopsys DDR ECC Driver + * This driver is based on ppc4xx_edac.c drivers + * + * Copyright (C) 2012 - 2014 Xilinx, Inc. + */ + +#include <linux/edac.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/of_device.h> + +#include "edac_module.h" + +/* Number of cs_rows needed per memory controller */ +#define SYNPS_EDAC_NR_CSROWS 1 + +/* Number of channels per memory controller */ +#define SYNPS_EDAC_NR_CHANS 1 + +/* Granularity of reported error in bytes */ +#define SYNPS_EDAC_ERR_GRAIN 1 + +#define SYNPS_EDAC_MSG_SIZE 256 + +#define SYNPS_EDAC_MOD_STRING "synps_edac" +#define SYNPS_EDAC_MOD_VER "1" + +/* Synopsys DDR memory controller registers that are relevant to ECC */ +#define CTRL_OFST 0x0 +#define T_ZQ_OFST 0xA4 + +/* ECC control register */ +#define ECC_CTRL_OFST 0xC4 +/* ECC log register */ +#define CE_LOG_OFST 0xC8 +/* ECC address register */ +#define CE_ADDR_OFST 0xCC +/* ECC data[31:0] register */ +#define CE_DATA_31_0_OFST 0xD0 + +/* Uncorrectable error info registers */ +#define UE_LOG_OFST 0xDC +#define UE_ADDR_OFST 0xE0 +#define UE_DATA_31_0_OFST 0xE4 + +#define STAT_OFST 0xF0 +#define SCRUB_OFST 0xF4 + +/* Control register bit field definitions */ +#define CTRL_BW_MASK 0xC +#define CTRL_BW_SHIFT 2 + +#define DDRCTL_WDTH_16 1 +#define DDRCTL_WDTH_32 0 + +/* ZQ register bit field definitions */ +#define T_ZQ_DDRMODE_MASK 0x2 + +/* ECC control register bit field definitions */ +#define ECC_CTRL_CLR_CE_ERR 0x2 +#define ECC_CTRL_CLR_UE_ERR 0x1 + +/* ECC correctable/uncorrectable error log register definitions */ +#define LOG_VALID 0x1 +#define CE_LOG_BITPOS_MASK 0xFE +#define CE_LOG_BITPOS_SHIFT 1 + +/* ECC correctable/uncorrectable error address register definitions */ +#define ADDR_COL_MASK 0xFFF +#define ADDR_ROW_MASK 0xFFFF000 +#define ADDR_ROW_SHIFT 12 +#define ADDR_BANK_MASK 0x70000000 +#define ADDR_BANK_SHIFT 28 + +/* ECC statistic register definitions */ +#define STAT_UECNT_MASK 0xFF +#define STAT_CECNT_MASK 0xFF00 +#define STAT_CECNT_SHIFT 8 + +/* ECC scrub register definitions */ +#define SCRUB_MODE_MASK 0x7 +#define SCRUB_MODE_SECDED 0x4 + +/* DDR ECC Quirks */ +#define DDR_ECC_INTR_SUPPORT BIT(0) +#define DDR_ECC_DATA_POISON_SUPPORT BIT(1) +#define DDR_ECC_INTR_SELF_CLEAR BIT(2) + +/* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */ +/* ECC Configuration Registers */ +#define ECC_CFG0_OFST 0x70 +#define ECC_CFG1_OFST 0x74 + +/* ECC Status Register */ +#define ECC_STAT_OFST 0x78 + +/* ECC Clear Register */ +#define ECC_CLR_OFST 0x7C + +/* ECC Error count Register */ +#define ECC_ERRCNT_OFST 0x80 + +/* ECC Corrected Error Address Register */ +#define ECC_CEADDR0_OFST 0x84 +#define ECC_CEADDR1_OFST 0x88 + +/* ECC Syndrome Registers */ +#define ECC_CSYND0_OFST 0x8C +#define ECC_CSYND1_OFST 0x90 +#define ECC_CSYND2_OFST 0x94 + +/* ECC Bit Mask0 Address Register */ +#define ECC_BITMASK0_OFST 0x98 +#define ECC_BITMASK1_OFST 0x9C +#define ECC_BITMASK2_OFST 0xA0 + +/* ECC UnCorrected Error Address Register */ +#define ECC_UEADDR0_OFST 0xA4 +#define ECC_UEADDR1_OFST 0xA8 + +/* ECC Syndrome Registers */ +#define ECC_UESYND0_OFST 0xAC +#define ECC_UESYND1_OFST 0xB0 +#define ECC_UESYND2_OFST 0xB4 + +/* ECC Poison Address Reg */ +#define ECC_POISON0_OFST 0xB8 +#define ECC_POISON1_OFST 0xBC + +#define ECC_ADDRMAP0_OFFSET 0x200 + +/* Control register bitfield definitions */ +#define ECC_CTRL_BUSWIDTH_MASK 0x3000 +#define ECC_CTRL_BUSWIDTH_SHIFT 12 +#define ECC_CTRL_CLR_CE_ERRCNT BIT(2) +#define ECC_CTRL_CLR_UE_ERRCNT BIT(3) + +/* DDR Control Register width definitions */ +#define DDRCTL_EWDTH_16 2 +#define DDRCTL_EWDTH_32 1 +#define DDRCTL_EWDTH_64 0 + +/* ECC status register definitions */ +#define ECC_STAT_UECNT_MASK 0xF0000 +#define ECC_STAT_UECNT_SHIFT 16 +#define ECC_STAT_CECNT_MASK 0xF00 +#define ECC_STAT_CECNT_SHIFT 8 +#define ECC_STAT_BITNUM_MASK 0x7F + +/* ECC error count register definitions */ +#define ECC_ERRCNT_UECNT_MASK 0xFFFF0000 +#define ECC_ERRCNT_UECNT_SHIFT 16 +#define ECC_ERRCNT_CECNT_MASK 0xFFFF + +/* DDR QOS Interrupt register definitions */ +#define DDR_QOS_IRQ_STAT_OFST 0x20200 +#define DDR_QOSUE_MASK 0x4 +#define DDR_QOSCE_MASK 0x2 +#define ECC_CE_UE_INTR_MASK 0x6 +#define DDR_QOS_IRQ_EN_OFST 0x20208 +#define DDR_QOS_IRQ_DB_OFST 0x2020C + +/* DDR QOS Interrupt register definitions */ +#define DDR_UE_MASK BIT(9) +#define DDR_CE_MASK BIT(8) + +/* ECC Corrected Error Register Mask and Shifts*/ +#define ECC_CEADDR0_RW_MASK 0x3FFFF +#define ECC_CEADDR0_RNK_MASK BIT(24) +#define ECC_CEADDR1_BNKGRP_MASK 0x3000000 +#define ECC_CEADDR1_BNKNR_MASK 0x70000 +#define ECC_CEADDR1_BLKNR_MASK 0xFFF +#define ECC_CEADDR1_BNKGRP_SHIFT 24 +#define ECC_CEADDR1_BNKNR_SHIFT 16 + +/* ECC Poison register shifts */ +#define ECC_POISON0_RANK_SHIFT 24 +#define ECC_POISON0_RANK_MASK BIT(24) +#define ECC_POISON0_COLUMN_SHIFT 0 +#define ECC_POISON0_COLUMN_MASK 0xFFF +#define ECC_POISON1_BG_SHIFT 28 +#define ECC_POISON1_BG_MASK 0x30000000 +#define ECC_POISON1_BANKNR_SHIFT 24 +#define ECC_POISON1_BANKNR_MASK 0x7000000 +#define ECC_POISON1_ROW_SHIFT 0 +#define ECC_POISON1_ROW_MASK 0x3FFFF + +/* DDR Memory type defines */ +#define MEM_TYPE_DDR3 0x1 +#define MEM_TYPE_LPDDR3 0x8 +#define MEM_TYPE_DDR2 0x4 +#define MEM_TYPE_DDR4 0x10 +#define MEM_TYPE_LPDDR4 0x20 + +/* DDRC Software control register */ +#define DDRC_SWCTL 0x320 + +/* DDRC ECC CE & UE poison mask */ +#define ECC_CEPOISON_MASK 0x3 +#define ECC_UEPOISON_MASK 0x1 + +/* DDRC Device config masks */ +#define DDRC_MSTR_CFG_MASK 0xC0000000 +#define DDRC_MSTR_CFG_SHIFT 30 +#define DDRC_MSTR_CFG_X4_MASK 0x0 +#define DDRC_MSTR_CFG_X8_MASK 0x1 +#define DDRC_MSTR_CFG_X16_MASK 0x2 +#define DDRC_MSTR_CFG_X32_MASK 0x3 + +#define DDR_MAX_ROW_SHIFT 18 +#define DDR_MAX_COL_SHIFT 14 +#define DDR_MAX_BANK_SHIFT 3 +#define DDR_MAX_BANKGRP_SHIFT 2 + +#define ROW_MAX_VAL_MASK 0xF +#define COL_MAX_VAL_MASK 0xF +#define BANK_MAX_VAL_MASK 0x1F +#define BANKGRP_MAX_VAL_MASK 0x1F +#define RANK_MAX_VAL_MASK 0x1F + +#define ROW_B0_BASE 6 +#define ROW_B1_BASE 7 +#define ROW_B2_BASE 8 +#define ROW_B3_BASE 9 +#define ROW_B4_BASE 10 +#define ROW_B5_BASE 11 +#define ROW_B6_BASE 12 +#define ROW_B7_BASE 13 +#define ROW_B8_BASE 14 +#define ROW_B9_BASE 15 +#define ROW_B10_BASE 16 +#define ROW_B11_BASE 17 +#define ROW_B12_BASE 18 +#define ROW_B13_BASE 19 +#define ROW_B14_BASE 20 +#define ROW_B15_BASE 21 +#define ROW_B16_BASE 22 +#define ROW_B17_BASE 23 + +#define COL_B2_BASE 2 +#define COL_B3_BASE 3 +#define COL_B4_BASE 4 +#define COL_B5_BASE 5 +#define COL_B6_BASE 6 +#define COL_B7_BASE 7 +#define COL_B8_BASE 8 +#define COL_B9_BASE 9 +#define COL_B10_BASE 10 +#define COL_B11_BASE 11 +#define COL_B12_BASE 12 +#define COL_B13_BASE 13 + +#define BANK_B0_BASE 2 +#define BANK_B1_BASE 3 +#define BANK_B2_BASE 4 + +#define BANKGRP_B0_BASE 2 +#define BANKGRP_B1_BASE 3 + +#define RANK_B0_BASE 6 + +/** + * struct ecc_error_info - ECC error log information. + * @row: Row number. + * @col: Column number. + * @bank: Bank number. + * @bitpos: Bit position. + * @data: Data causing the error. + * @bankgrpnr: Bank group number. + * @blknr: Block number. + */ +struct ecc_error_info { + u32 row; + u32 col; + u32 bank; + u32 bitpos; + u32 data; + u32 bankgrpnr; + u32 blknr; +}; + +/** + * struct synps_ecc_status - ECC status information to report. + * @ce_cnt: Correctable error count. + * @ue_cnt: Uncorrectable error count. + * @ceinfo: Correctable error log information. + * @ueinfo: Uncorrectable error log information. + */ +struct synps_ecc_status { + u32 ce_cnt; + u32 ue_cnt; + struct ecc_error_info ceinfo; + struct ecc_error_info ueinfo; +}; + +/** + * struct synps_edac_priv - DDR memory controller private instance data. + * @baseaddr: Base address of the DDR controller. + * @message: Buffer for framing the event specific info. + * @stat: ECC status information. + * @p_data: Platform data. + * @ce_cnt: Correctable Error count. + * @ue_cnt: Uncorrectable Error count. + * @poison_addr: Data poison address. + * @row_shift: Bit shifts for row bit. + * @col_shift: Bit shifts for column bit. + * @bank_shift: Bit shifts for bank bit. + * @bankgrp_shift: Bit shifts for bank group bit. + * @rank_shift: Bit shifts for rank bit. + */ +struct synps_edac_priv { + void __iomem *baseaddr; + char message[SYNPS_EDAC_MSG_SIZE]; + struct synps_ecc_status stat; + const struct synps_platform_data *p_data; + u32 ce_cnt; + u32 ue_cnt; +#ifdef CONFIG_EDAC_DEBUG + ulong poison_addr; + u32 row_shift[18]; + u32 col_shift[14]; + u32 bank_shift[3]; + u32 bankgrp_shift[2]; + u32 rank_shift[1]; +#endif +}; + +/** + * struct synps_platform_data - synps platform data structure. + * @get_error_info: Get EDAC error info. + * @get_mtype: Get mtype. + * @get_dtype: Get dtype. + * @get_ecc_state: Get ECC state. + * @quirks: To differentiate IPs. + */ +struct synps_platform_data { + int (*get_error_info)(struct synps_edac_priv *priv); + enum mem_type (*get_mtype)(const void __iomem *base); + enum dev_type (*get_dtype)(const void __iomem *base); + bool (*get_ecc_state)(void __iomem *base); + int quirks; +}; + +/** + * zynq_get_error_info - Get the current ECC error info. + * @priv: DDR memory controller private instance data. + * + * Return: one if there is no error, otherwise zero. + */ +static int zynq_get_error_info(struct synps_edac_priv *priv) +{ + struct synps_ecc_status *p; + u32 regval, clearval = 0; + void __iomem *base; + + base = priv->baseaddr; + p = &priv->stat; + + regval = readl(base + STAT_OFST); + if (!regval) + return 1; + + p->ce_cnt = (regval & STAT_CECNT_MASK) >> STAT_CECNT_SHIFT; + p->ue_cnt = regval & STAT_UECNT_MASK; + + regval = readl(base + CE_LOG_OFST); + if (!(p->ce_cnt && (regval & LOG_VALID))) + goto ue_err; + + p->ceinfo.bitpos = (regval & CE_LOG_BITPOS_MASK) >> CE_LOG_BITPOS_SHIFT; + regval = readl(base + CE_ADDR_OFST); + p->ceinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; + p->ceinfo.col = regval & ADDR_COL_MASK; + p->ceinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; + p->ceinfo.data = readl(base + CE_DATA_31_0_OFST); + edac_dbg(3, "CE bit position: %d data: %d\n", p->ceinfo.bitpos, + p->ceinfo.data); + clearval = ECC_CTRL_CLR_CE_ERR; + +ue_err: + regval = readl(base + UE_LOG_OFST); + if (!(p->ue_cnt && (regval & LOG_VALID))) + goto out; + + regval = readl(base + UE_ADDR_OFST); + p->ueinfo.row = (regval & ADDR_ROW_MASK) >> ADDR_ROW_SHIFT; + p->ueinfo.col = regval & ADDR_COL_MASK; + p->ueinfo.bank = (regval & ADDR_BANK_MASK) >> ADDR_BANK_SHIFT; + p->ueinfo.data = readl(base + UE_DATA_31_0_OFST); + clearval |= ECC_CTRL_CLR_UE_ERR; + +out: + writel(clearval, base + ECC_CTRL_OFST); + writel(0x0, base + ECC_CTRL_OFST); + + return 0; +} + +/** + * zynqmp_get_error_info - Get the current ECC error info. + * @priv: DDR memory controller private instance data. + * + * Return: one if there is no error otherwise returns zero. + */ +static int zynqmp_get_error_info(struct synps_edac_priv *priv) +{ + struct synps_ecc_status *p; + u32 regval, clearval = 0; + void __iomem *base; + + base = priv->baseaddr; + p = &priv->stat; + + regval = readl(base + ECC_ERRCNT_OFST); + p->ce_cnt = regval & ECC_ERRCNT_CECNT_MASK; + p->ue_cnt = (regval & ECC_ERRCNT_UECNT_MASK) >> ECC_ERRCNT_UECNT_SHIFT; + if (!p->ce_cnt) + goto ue_err; + + regval = readl(base + ECC_STAT_OFST); + if (!regval) + return 1; + + p->ceinfo.bitpos = (regval & ECC_STAT_BITNUM_MASK); + + regval = readl(base + ECC_CEADDR0_OFST); + p->ceinfo.row = (regval & ECC_CEADDR0_RW_MASK); + regval = readl(base + ECC_CEADDR1_OFST); + p->ceinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >> + ECC_CEADDR1_BNKNR_SHIFT; + p->ceinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >> + ECC_CEADDR1_BNKGRP_SHIFT; + p->ceinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK); + p->ceinfo.data = readl(base + ECC_CSYND0_OFST); + edac_dbg(2, "ECCCSYN0: 0x%08X ECCCSYN1: 0x%08X ECCCSYN2: 0x%08X\n", + readl(base + ECC_CSYND0_OFST), readl(base + ECC_CSYND1_OFST), + readl(base + ECC_CSYND2_OFST)); +ue_err: + if (!p->ue_cnt) + goto out; + + regval = readl(base + ECC_UEADDR0_OFST); + p->ueinfo.row = (regval & ECC_CEADDR0_RW_MASK); + regval = readl(base + ECC_UEADDR1_OFST); + p->ueinfo.bankgrpnr = (regval & ECC_CEADDR1_BNKGRP_MASK) >> + ECC_CEADDR1_BNKGRP_SHIFT; + p->ueinfo.bank = (regval & ECC_CEADDR1_BNKNR_MASK) >> + ECC_CEADDR1_BNKNR_SHIFT; + p->ueinfo.blknr = (regval & ECC_CEADDR1_BLKNR_MASK); + p->ueinfo.data = readl(base + ECC_UESYND0_OFST); +out: + clearval = ECC_CTRL_CLR_CE_ERR | ECC_CTRL_CLR_CE_ERRCNT; + clearval |= ECC_CTRL_CLR_UE_ERR | ECC_CTRL_CLR_UE_ERRCNT; + writel(clearval, base + ECC_CLR_OFST); + writel(0x0, base + ECC_CLR_OFST); + + return 0; +} + +/** + * handle_error - Handle Correctable and Uncorrectable errors. + * @mci: EDAC memory controller instance. + * @p: Synopsys ECC status structure. + * + * Handles ECC correctable and uncorrectable errors. + */ +static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p) +{ + struct synps_edac_priv *priv = mci->pvt_info; + struct ecc_error_info *pinf; + + if (p->ce_cnt) { + pinf = &p->ceinfo; + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { + snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, + "DDR ECC error type:%s Row %d Bank %d BankGroup Number %d Block Number %d Bit Position: %d Data: 0x%08x", + "CE", pinf->row, pinf->bank, + pinf->bankgrpnr, pinf->blknr, + pinf->bitpos, pinf->data); + } else { + snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, + "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x", + "CE", pinf->row, pinf->bank, pinf->col, + pinf->bitpos, pinf->data); + } + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + p->ce_cnt, 0, 0, 0, 0, 0, -1, + priv->message, ""); + } + + if (p->ue_cnt) { + pinf = &p->ueinfo; + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { + snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, + "DDR ECC error type :%s Row %d Bank %d BankGroup Number %d Block Number %d", + "UE", pinf->row, pinf->bank, + pinf->bankgrpnr, pinf->blknr); + } else { + snprintf(priv->message, SYNPS_EDAC_MSG_SIZE, + "DDR ECC error type :%s Row %d Bank %d Col %d ", + "UE", pinf->row, pinf->bank, pinf->col); + } + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + p->ue_cnt, 0, 0, 0, 0, 0, -1, + priv->message, ""); + } + + memset(p, 0, sizeof(*p)); +} + +static void enable_intr(struct synps_edac_priv *priv) +{ + /* Enable UE/CE Interrupts */ + if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR) + writel(DDR_UE_MASK | DDR_CE_MASK, + priv->baseaddr + ECC_CLR_OFST); + else + writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, + priv->baseaddr + DDR_QOS_IRQ_EN_OFST); + +} + +static void disable_intr(struct synps_edac_priv *priv) +{ + /* Disable UE/CE Interrupts */ + if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR) + writel(0x0, priv->baseaddr + ECC_CLR_OFST); + else + writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK, + priv->baseaddr + DDR_QOS_IRQ_DB_OFST); +} + +/** + * intr_handler - Interrupt Handler for ECC interrupts. + * @irq: IRQ number. + * @dev_id: Device ID. + * + * Return: IRQ_NONE, if interrupt not set or IRQ_HANDLED otherwise. + */ +static irqreturn_t intr_handler(int irq, void *dev_id) +{ + const struct synps_platform_data *p_data; + struct mem_ctl_info *mci = dev_id; + struct synps_edac_priv *priv; + int status, regval; + + priv = mci->pvt_info; + p_data = priv->p_data; + + /* + * v3.0 of the controller has the ce/ue bits cleared automatically, + * so this condition does not apply. + */ + if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) { + regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); + regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK); + if (!(regval & ECC_CE_UE_INTR_MASK)) + return IRQ_NONE; + } + + status = p_data->get_error_info(priv); + if (status) + return IRQ_NONE; + + priv->ce_cnt += priv->stat.ce_cnt; + priv->ue_cnt += priv->stat.ue_cnt; + handle_error(mci, &priv->stat); + + edac_dbg(3, "Total error count CE %d UE %d\n", + priv->ce_cnt, priv->ue_cnt); + /* v3.0 of the controller does not have this register */ + if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) + writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST); + else + enable_intr(priv); + + return IRQ_HANDLED; +} + +/** + * check_errors - Check controller for ECC errors. + * @mci: EDAC memory controller instance. + * + * Check and post ECC errors. Called by the polling thread. + */ +static void check_errors(struct mem_ctl_info *mci) +{ + const struct synps_platform_data *p_data; + struct synps_edac_priv *priv; + int status; + + priv = mci->pvt_info; + p_data = priv->p_data; + + status = p_data->get_error_info(priv); + if (status) + return; + + priv->ce_cnt += priv->stat.ce_cnt; + priv->ue_cnt += priv->stat.ue_cnt; + handle_error(mci, &priv->stat); + + edac_dbg(3, "Total error count CE %d UE %d\n", + priv->ce_cnt, priv->ue_cnt); +} + +/** + * zynq_get_dtype - Return the controller memory width. + * @base: DDR memory controller base address. + * + * Get the EDAC device type width appropriate for the current controller + * configuration. + * + * Return: a device type width enumeration. + */ +static enum dev_type zynq_get_dtype(const void __iomem *base) +{ + enum dev_type dt; + u32 width; + + width = readl(base + CTRL_OFST); + width = (width & CTRL_BW_MASK) >> CTRL_BW_SHIFT; + + switch (width) { + case DDRCTL_WDTH_16: + dt = DEV_X2; + break; + case DDRCTL_WDTH_32: + dt = DEV_X4; + break; + default: + dt = DEV_UNKNOWN; + } + + return dt; +} + +/** + * zynqmp_get_dtype - Return the controller memory width. + * @base: DDR memory controller base address. + * + * Get the EDAC device type width appropriate for the current controller + * configuration. + * + * Return: a device type width enumeration. + */ +static enum dev_type zynqmp_get_dtype(const void __iomem *base) +{ + enum dev_type dt; + u32 width; + + width = readl(base + CTRL_OFST); + width = (width & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT; + switch (width) { + case DDRCTL_EWDTH_16: + dt = DEV_X2; + break; + case DDRCTL_EWDTH_32: + dt = DEV_X4; + break; + case DDRCTL_EWDTH_64: + dt = DEV_X8; + break; + default: + dt = DEV_UNKNOWN; + } + + return dt; +} + +/** + * zynq_get_ecc_state - Return the controller ECC enable/disable status. + * @base: DDR memory controller base address. + * + * Get the ECC enable/disable status of the controller. + * + * Return: true if enabled, otherwise false. + */ +static bool zynq_get_ecc_state(void __iomem *base) +{ + enum dev_type dt; + u32 ecctype; + + dt = zynq_get_dtype(base); + if (dt == DEV_UNKNOWN) + return false; + + ecctype = readl(base + SCRUB_OFST) & SCRUB_MODE_MASK; + if ((ecctype == SCRUB_MODE_SECDED) && (dt == DEV_X2)) + return true; + + return false; +} + +/** + * zynqmp_get_ecc_state - Return the controller ECC enable/disable status. + * @base: DDR memory controller base address. + * + * Get the ECC enable/disable status for the controller. + * + * Return: a ECC status boolean i.e true/false - enabled/disabled. + */ +static bool zynqmp_get_ecc_state(void __iomem *base) +{ + enum dev_type dt; + u32 ecctype; + + dt = zynqmp_get_dtype(base); + if (dt == DEV_UNKNOWN) + return false; + + ecctype = readl(base + ECC_CFG0_OFST) & SCRUB_MODE_MASK; + if ((ecctype == SCRUB_MODE_SECDED) && + ((dt == DEV_X2) || (dt == DEV_X4) || (dt == DEV_X8))) + return true; + + return false; +} + +/** + * get_memsize - Read the size of the attached memory device. + * + * Return: the memory size in bytes. + */ +static u32 get_memsize(void) +{ + struct sysinfo inf; + + si_meminfo(&inf); + + return inf.totalram * inf.mem_unit; +} + +/** + * zynq_get_mtype - Return the controller memory type. + * @base: Synopsys ECC status structure. + * + * Get the EDAC memory type appropriate for the current controller + * configuration. + * + * Return: a memory type enumeration. + */ +static enum mem_type zynq_get_mtype(const void __iomem *base) +{ + enum mem_type mt; + u32 memtype; + + memtype = readl(base + T_ZQ_OFST); + + if (memtype & T_ZQ_DDRMODE_MASK) + mt = MEM_DDR3; + else + mt = MEM_DDR2; + + return mt; +} + +/** + * zynqmp_get_mtype - Returns controller memory type. + * @base: Synopsys ECC status structure. + * + * Get the EDAC memory type appropriate for the current controller + * configuration. + * + * Return: a memory type enumeration. + */ +static enum mem_type zynqmp_get_mtype(const void __iomem *base) +{ + enum mem_type mt; + u32 memtype; + + memtype = readl(base + CTRL_OFST); + + if ((memtype & MEM_TYPE_DDR3) || (memtype & MEM_TYPE_LPDDR3)) + mt = MEM_DDR3; + else if (memtype & MEM_TYPE_DDR2) + mt = MEM_RDDR2; + else if ((memtype & MEM_TYPE_LPDDR4) || (memtype & MEM_TYPE_DDR4)) + mt = MEM_DDR4; + else + mt = MEM_EMPTY; + + return mt; +} + +/** + * init_csrows - Initialize the csrow data. + * @mci: EDAC memory controller instance. + * + * Initialize the chip select rows associated with the EDAC memory + * controller instance. + */ +static void init_csrows(struct mem_ctl_info *mci) +{ + struct synps_edac_priv *priv = mci->pvt_info; + const struct synps_platform_data *p_data; + struct csrow_info *csi; + struct dimm_info *dimm; + u32 size, row; + int j; + + p_data = priv->p_data; + + for (row = 0; row < mci->nr_csrows; row++) { + csi = mci->csrows[row]; + size = get_memsize(); + + for (j = 0; j < csi->nr_channels; j++) { + dimm = csi->channels[j]->dimm; + dimm->edac_mode = EDAC_SECDED; + dimm->mtype = p_data->get_mtype(priv->baseaddr); + dimm->nr_pages = (size >> PAGE_SHIFT) / csi->nr_channels; + dimm->grain = SYNPS_EDAC_ERR_GRAIN; + dimm->dtype = p_data->get_dtype(priv->baseaddr); + } + } +} + +/** + * mc_init - Initialize one driver instance. + * @mci: EDAC memory controller instance. + * @pdev: platform device. + * + * Perform initialization of the EDAC memory controller instance and + * related driver-private data associated with the memory controller the + * instance is bound to. + */ +static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev) +{ + struct synps_edac_priv *priv; + + mci->pdev = &pdev->dev; + priv = mci->pvt_info; + platform_set_drvdata(pdev, mci); + + /* Initialize controller capabilities and configuration */ + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->scrub_cap = SCRUB_HW_SRC; + mci->scrub_mode = SCRUB_NONE; + + mci->edac_cap = EDAC_FLAG_SECDED; + mci->ctl_name = "synps_ddr_controller"; + mci->dev_name = SYNPS_EDAC_MOD_STRING; + mci->mod_name = SYNPS_EDAC_MOD_VER; + + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { + edac_op_state = EDAC_OPSTATE_INT; + } else { + edac_op_state = EDAC_OPSTATE_POLL; + mci->edac_check = check_errors; + } + + mci->ctl_page_to_phys = NULL; + + init_csrows(mci); +} + +static int setup_irq(struct mem_ctl_info *mci, + struct platform_device *pdev) +{ + struct synps_edac_priv *priv = mci->pvt_info; + int ret, irq; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + edac_printk(KERN_ERR, EDAC_MC, + "No IRQ %d in DT\n", irq); + return irq; + } + + ret = devm_request_irq(&pdev->dev, irq, intr_handler, + 0, dev_name(&pdev->dev), mci); + if (ret < 0) { + edac_printk(KERN_ERR, EDAC_MC, "Failed to request IRQ\n"); + return ret; + } + + enable_intr(priv); + + return 0; +} + +static const struct synps_platform_data zynq_edac_def = { + .get_error_info = zynq_get_error_info, + .get_mtype = zynq_get_mtype, + .get_dtype = zynq_get_dtype, + .get_ecc_state = zynq_get_ecc_state, + .quirks = 0, +}; + +static const struct synps_platform_data zynqmp_edac_def = { + .get_error_info = zynqmp_get_error_info, + .get_mtype = zynqmp_get_mtype, + .get_dtype = zynqmp_get_dtype, + .get_ecc_state = zynqmp_get_ecc_state, + .quirks = (DDR_ECC_INTR_SUPPORT +#ifdef CONFIG_EDAC_DEBUG + | DDR_ECC_DATA_POISON_SUPPORT +#endif + ), +}; + +static const struct synps_platform_data synopsys_edac_def = { + .get_error_info = zynqmp_get_error_info, + .get_mtype = zynqmp_get_mtype, + .get_dtype = zynqmp_get_dtype, + .get_ecc_state = zynqmp_get_ecc_state, + .quirks = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR +#ifdef CONFIG_EDAC_DEBUG + | DDR_ECC_DATA_POISON_SUPPORT +#endif + ), +}; + + +static const struct of_device_id synps_edac_match[] = { + { + .compatible = "xlnx,zynq-ddrc-a05", + .data = (void *)&zynq_edac_def + }, + { + .compatible = "xlnx,zynqmp-ddrc-2.40a", + .data = (void *)&zynqmp_edac_def + }, + { + .compatible = "snps,ddrc-3.80a", + .data = (void *)&synopsys_edac_def + }, + { + /* end of table */ + } +}; + +MODULE_DEVICE_TABLE(of, synps_edac_match); + +#ifdef CONFIG_EDAC_DEBUG +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) + +/** + * ddr_poison_setup - Update poison registers. + * @priv: DDR memory controller private instance data. + * + * Update poison registers as per DDR mapping. + * Return: none. + */ +static void ddr_poison_setup(struct synps_edac_priv *priv) +{ + int col = 0, row = 0, bank = 0, bankgrp = 0, rank = 0, regval; + int index; + ulong hif_addr = 0; + + hif_addr = priv->poison_addr >> 3; + + for (index = 0; index < DDR_MAX_ROW_SHIFT; index++) { + if (priv->row_shift[index]) + row |= (((hif_addr >> priv->row_shift[index]) & + BIT(0)) << index); + else + break; + } + + for (index = 0; index < DDR_MAX_COL_SHIFT; index++) { + if (priv->col_shift[index] || index < 3) + col |= (((hif_addr >> priv->col_shift[index]) & + BIT(0)) << index); + else + break; + } + + for (index = 0; index < DDR_MAX_BANK_SHIFT; index++) { + if (priv->bank_shift[index]) + bank |= (((hif_addr >> priv->bank_shift[index]) & + BIT(0)) << index); + else + break; + } + + for (index = 0; index < DDR_MAX_BANKGRP_SHIFT; index++) { + if (priv->bankgrp_shift[index]) + bankgrp |= (((hif_addr >> priv->bankgrp_shift[index]) + & BIT(0)) << index); + else + break; + } + + if (priv->rank_shift[0]) + rank = (hif_addr >> priv->rank_shift[0]) & BIT(0); + + regval = (rank << ECC_POISON0_RANK_SHIFT) & ECC_POISON0_RANK_MASK; + regval |= (col << ECC_POISON0_COLUMN_SHIFT) & ECC_POISON0_COLUMN_MASK; + writel(regval, priv->baseaddr + ECC_POISON0_OFST); + + regval = (bankgrp << ECC_POISON1_BG_SHIFT) & ECC_POISON1_BG_MASK; + regval |= (bank << ECC_POISON1_BANKNR_SHIFT) & ECC_POISON1_BANKNR_MASK; + regval |= (row << ECC_POISON1_ROW_SHIFT) & ECC_POISON1_ROW_MASK; + writel(regval, priv->baseaddr + ECC_POISON1_OFST); +} + +static ssize_t inject_data_error_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct synps_edac_priv *priv = mci->pvt_info; + + return sprintf(data, "Poison0 Addr: 0x%08x\n\rPoison1 Addr: 0x%08x\n\r" + "Error injection Address: 0x%lx\n\r", + readl(priv->baseaddr + ECC_POISON0_OFST), + readl(priv->baseaddr + ECC_POISON1_OFST), + priv->poison_addr); +} + +static ssize_t inject_data_error_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct synps_edac_priv *priv = mci->pvt_info; + + if (kstrtoul(data, 0, &priv->poison_addr)) + return -EINVAL; + + ddr_poison_setup(priv); + + return count; +} + +static ssize_t inject_data_poison_show(struct device *dev, + struct device_attribute *mattr, + char *data) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct synps_edac_priv *priv = mci->pvt_info; + + return sprintf(data, "Data Poisoning: %s\n\r", + (((readl(priv->baseaddr + ECC_CFG1_OFST)) & 0x3) == 0x3) + ? ("Correctable Error") : ("UnCorrectable Error")); +} + +static ssize_t inject_data_poison_store(struct device *dev, + struct device_attribute *mattr, + const char *data, size_t count) +{ + struct mem_ctl_info *mci = to_mci(dev); + struct synps_edac_priv *priv = mci->pvt_info; + + writel(0, priv->baseaddr + DDRC_SWCTL); + if (strncmp(data, "CE", 2) == 0) + writel(ECC_CEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST); + else + writel(ECC_UEPOISON_MASK, priv->baseaddr + ECC_CFG1_OFST); + writel(1, priv->baseaddr + DDRC_SWCTL); + + return count; +} + +static DEVICE_ATTR_RW(inject_data_error); +static DEVICE_ATTR_RW(inject_data_poison); + +static int edac_create_sysfs_attributes(struct mem_ctl_info *mci) +{ + int rc; + + rc = device_create_file(&mci->dev, &dev_attr_inject_data_error); + if (rc < 0) + return rc; + rc = device_create_file(&mci->dev, &dev_attr_inject_data_poison); + if (rc < 0) + return rc; + return 0; +} + +static void edac_remove_sysfs_attributes(struct mem_ctl_info *mci) +{ + device_remove_file(&mci->dev, &dev_attr_inject_data_error); + device_remove_file(&mci->dev, &dev_attr_inject_data_poison); +} + +static void setup_row_address_map(struct synps_edac_priv *priv, u32 *addrmap) +{ + u32 addrmap_row_b2_10; + int index; + + priv->row_shift[0] = (addrmap[5] & ROW_MAX_VAL_MASK) + ROW_B0_BASE; + priv->row_shift[1] = ((addrmap[5] >> 8) & + ROW_MAX_VAL_MASK) + ROW_B1_BASE; + + addrmap_row_b2_10 = (addrmap[5] >> 16) & ROW_MAX_VAL_MASK; + if (addrmap_row_b2_10 != ROW_MAX_VAL_MASK) { + for (index = 2; index < 11; index++) + priv->row_shift[index] = addrmap_row_b2_10 + + index + ROW_B0_BASE; + + } else { + priv->row_shift[2] = (addrmap[9] & + ROW_MAX_VAL_MASK) + ROW_B2_BASE; + priv->row_shift[3] = ((addrmap[9] >> 8) & + ROW_MAX_VAL_MASK) + ROW_B3_BASE; + priv->row_shift[4] = ((addrmap[9] >> 16) & + ROW_MAX_VAL_MASK) + ROW_B4_BASE; + priv->row_shift[5] = ((addrmap[9] >> 24) & + ROW_MAX_VAL_MASK) + ROW_B5_BASE; + priv->row_shift[6] = (addrmap[10] & + ROW_MAX_VAL_MASK) + ROW_B6_BASE; + priv->row_shift[7] = ((addrmap[10] >> 8) & + ROW_MAX_VAL_MASK) + ROW_B7_BASE; + priv->row_shift[8] = ((addrmap[10] >> 16) & + ROW_MAX_VAL_MASK) + ROW_B8_BASE; + priv->row_shift[9] = ((addrmap[10] >> 24) & + ROW_MAX_VAL_MASK) + ROW_B9_BASE; + priv->row_shift[10] = (addrmap[11] & + ROW_MAX_VAL_MASK) + ROW_B10_BASE; + } + + priv->row_shift[11] = (((addrmap[5] >> 24) & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : (((addrmap[5] >> 24) & + ROW_MAX_VAL_MASK) + ROW_B11_BASE); + priv->row_shift[12] = ((addrmap[6] & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : ((addrmap[6] & + ROW_MAX_VAL_MASK) + ROW_B12_BASE); + priv->row_shift[13] = (((addrmap[6] >> 8) & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 8) & + ROW_MAX_VAL_MASK) + ROW_B13_BASE); + priv->row_shift[14] = (((addrmap[6] >> 16) & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 16) & + ROW_MAX_VAL_MASK) + ROW_B14_BASE); + priv->row_shift[15] = (((addrmap[6] >> 24) & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : (((addrmap[6] >> 24) & + ROW_MAX_VAL_MASK) + ROW_B15_BASE); + priv->row_shift[16] = ((addrmap[7] & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : ((addrmap[7] & + ROW_MAX_VAL_MASK) + ROW_B16_BASE); + priv->row_shift[17] = (((addrmap[7] >> 8) & ROW_MAX_VAL_MASK) == + ROW_MAX_VAL_MASK) ? 0 : (((addrmap[7] >> 8) & + ROW_MAX_VAL_MASK) + ROW_B17_BASE); +} + +static void setup_column_address_map(struct synps_edac_priv *priv, u32 *addrmap) +{ + u32 width, memtype; + int index; + + memtype = readl(priv->baseaddr + CTRL_OFST); + width = (memtype & ECC_CTRL_BUSWIDTH_MASK) >> ECC_CTRL_BUSWIDTH_SHIFT; + + priv->col_shift[0] = 0; + priv->col_shift[1] = 1; + priv->col_shift[2] = (addrmap[2] & COL_MAX_VAL_MASK) + COL_B2_BASE; + priv->col_shift[3] = ((addrmap[2] >> 8) & + COL_MAX_VAL_MASK) + COL_B3_BASE; + priv->col_shift[4] = (((addrmap[2] >> 16) & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 16) & + COL_MAX_VAL_MASK) + COL_B4_BASE); + priv->col_shift[5] = (((addrmap[2] >> 24) & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : (((addrmap[2] >> 24) & + COL_MAX_VAL_MASK) + COL_B5_BASE); + priv->col_shift[6] = ((addrmap[3] & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : ((addrmap[3] & + COL_MAX_VAL_MASK) + COL_B6_BASE); + priv->col_shift[7] = (((addrmap[3] >> 8) & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 8) & + COL_MAX_VAL_MASK) + COL_B7_BASE); + priv->col_shift[8] = (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 16) & + COL_MAX_VAL_MASK) + COL_B8_BASE); + priv->col_shift[9] = (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) == + COL_MAX_VAL_MASK) ? 0 : (((addrmap[3] >> 24) & + COL_MAX_VAL_MASK) + COL_B9_BASE); + if (width == DDRCTL_EWDTH_64) { + if (memtype & MEM_TYPE_LPDDR3) { + priv->col_shift[10] = ((addrmap[4] & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + ((addrmap[4] & COL_MAX_VAL_MASK) + + COL_B10_BASE); + priv->col_shift[11] = (((addrmap[4] >> 8) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) + + COL_B11_BASE); + } else { + priv->col_shift[11] = ((addrmap[4] & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + ((addrmap[4] & COL_MAX_VAL_MASK) + + COL_B10_BASE); + priv->col_shift[13] = (((addrmap[4] >> 8) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[4] >> 8) & COL_MAX_VAL_MASK) + + COL_B11_BASE); + } + } else if (width == DDRCTL_EWDTH_32) { + if (memtype & MEM_TYPE_LPDDR3) { + priv->col_shift[10] = (((addrmap[3] >> 24) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + + COL_B9_BASE); + priv->col_shift[11] = ((addrmap[4] & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + ((addrmap[4] & COL_MAX_VAL_MASK) + + COL_B10_BASE); + } else { + priv->col_shift[11] = (((addrmap[3] >> 24) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + + COL_B9_BASE); + priv->col_shift[13] = ((addrmap[4] & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + ((addrmap[4] & COL_MAX_VAL_MASK) + + COL_B10_BASE); + } + } else { + if (memtype & MEM_TYPE_LPDDR3) { + priv->col_shift[10] = (((addrmap[3] >> 16) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) + + COL_B8_BASE); + priv->col_shift[11] = (((addrmap[3] >> 24) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + + COL_B9_BASE); + priv->col_shift[13] = ((addrmap[4] & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + ((addrmap[4] & COL_MAX_VAL_MASK) + + COL_B10_BASE); + } else { + priv->col_shift[11] = (((addrmap[3] >> 16) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 16) & COL_MAX_VAL_MASK) + + COL_B8_BASE); + priv->col_shift[13] = (((addrmap[3] >> 24) & + COL_MAX_VAL_MASK) == COL_MAX_VAL_MASK) ? 0 : + (((addrmap[3] >> 24) & COL_MAX_VAL_MASK) + + COL_B9_BASE); + } + } + + if (width) { + for (index = 9; index > width; index--) { + priv->col_shift[index] = priv->col_shift[index - width]; + priv->col_shift[index - width] = 0; + } + } + +} + +static void setup_bank_address_map(struct synps_edac_priv *priv, u32 *addrmap) +{ + priv->bank_shift[0] = (addrmap[1] & BANK_MAX_VAL_MASK) + BANK_B0_BASE; + priv->bank_shift[1] = ((addrmap[1] >> 8) & + BANK_MAX_VAL_MASK) + BANK_B1_BASE; + priv->bank_shift[2] = (((addrmap[1] >> 16) & + BANK_MAX_VAL_MASK) == BANK_MAX_VAL_MASK) ? 0 : + (((addrmap[1] >> 16) & BANK_MAX_VAL_MASK) + + BANK_B2_BASE); + +} + +static void setup_bg_address_map(struct synps_edac_priv *priv, u32 *addrmap) +{ + priv->bankgrp_shift[0] = (addrmap[8] & + BANKGRP_MAX_VAL_MASK) + BANKGRP_B0_BASE; + priv->bankgrp_shift[1] = (((addrmap[8] >> 8) & BANKGRP_MAX_VAL_MASK) == + BANKGRP_MAX_VAL_MASK) ? 0 : (((addrmap[8] >> 8) + & BANKGRP_MAX_VAL_MASK) + BANKGRP_B1_BASE); + +} + +static void setup_rank_address_map(struct synps_edac_priv *priv, u32 *addrmap) +{ + priv->rank_shift[0] = ((addrmap[0] & RANK_MAX_VAL_MASK) == + RANK_MAX_VAL_MASK) ? 0 : ((addrmap[0] & + RANK_MAX_VAL_MASK) + RANK_B0_BASE); +} + +/** + * setup_address_map - Set Address Map by querying ADDRMAP registers. + * @priv: DDR memory controller private instance data. + * + * Set Address Map by querying ADDRMAP registers. + * + * Return: none. + */ +static void setup_address_map(struct synps_edac_priv *priv) +{ + u32 addrmap[12]; + int index; + + for (index = 0; index < 12; index++) { + u32 addrmap_offset; + + addrmap_offset = ECC_ADDRMAP0_OFFSET + (index * 4); + addrmap[index] = readl(priv->baseaddr + addrmap_offset); + } + + setup_row_address_map(priv, addrmap); + + setup_column_address_map(priv, addrmap); + + setup_bank_address_map(priv, addrmap); + + setup_bg_address_map(priv, addrmap); + + setup_rank_address_map(priv, addrmap); +} +#endif /* CONFIG_EDAC_DEBUG */ + +/** + * mc_probe - Check controller and bind driver. + * @pdev: platform device. + * + * Probe a specific controller instance for binding with the driver. + * + * Return: 0 if the controller instance was successfully bound to the + * driver; otherwise, < 0 on error. + */ +static int mc_probe(struct platform_device *pdev) +{ + const struct synps_platform_data *p_data; + struct edac_mc_layer layers[2]; + struct synps_edac_priv *priv; + struct mem_ctl_info *mci; + void __iomem *baseaddr; + struct resource *res; + int rc; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + baseaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(baseaddr)) + return PTR_ERR(baseaddr); + + p_data = of_device_get_match_data(&pdev->dev); + if (!p_data) + return -ENODEV; + + if (!p_data->get_ecc_state(baseaddr)) { + edac_printk(KERN_INFO, EDAC_MC, "ECC not enabled\n"); + return -ENXIO; + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = SYNPS_EDAC_NR_CSROWS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = SYNPS_EDAC_NR_CHANS; + layers[1].is_virt_csrow = false; + + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, + sizeof(struct synps_edac_priv)); + if (!mci) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed memory allocation for mc instance\n"); + return -ENOMEM; + } + + priv = mci->pvt_info; + priv->baseaddr = baseaddr; + priv->p_data = p_data; + + mc_init(mci, pdev); + + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) { + rc = setup_irq(mci, pdev); + if (rc) + goto free_edac_mc; + } + + rc = edac_mc_add_mc(mci); + if (rc) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed to register with EDAC core\n"); + goto free_edac_mc; + } + +#ifdef CONFIG_EDAC_DEBUG + if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) { + rc = edac_create_sysfs_attributes(mci); + if (rc) { + edac_printk(KERN_ERR, EDAC_MC, + "Failed to create sysfs entries\n"); + goto free_edac_mc; + } + } + + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) + setup_address_map(priv); +#endif + + /* + * Start capturing the correctable and uncorrectable errors. A write of + * 0 starts the counters. + */ + if (!(priv->p_data->quirks & DDR_ECC_INTR_SUPPORT)) + writel(0x0, baseaddr + ECC_CTRL_OFST); + + return rc; + +free_edac_mc: + edac_mc_free(mci); + + return rc; +} + +/** + * mc_remove - Unbind driver from controller. + * @pdev: Platform device. + * + * Return: Unconditionally 0 + */ +static int mc_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + struct synps_edac_priv *priv = mci->pvt_info; + + if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) + disable_intr(priv); + +#ifdef CONFIG_EDAC_DEBUG + if (priv->p_data->quirks & DDR_ECC_DATA_POISON_SUPPORT) + edac_remove_sysfs_attributes(mci); +#endif + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static struct platform_driver synps_edac_mc_driver = { + .driver = { + .name = "synopsys-edac", + .of_match_table = synps_edac_match, + }, + .probe = mc_probe, + .remove = mc_remove, +}; + +module_platform_driver(synps_edac_mc_driver); + +MODULE_AUTHOR("Xilinx Inc"); +MODULE_DESCRIPTION("Synopsys DDR ECC driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c new file mode 100644 index 000000000..4dca21b39 --- /dev/null +++ b/drivers/edac/thunderx_edac.c @@ -0,0 +1,2151 @@ +/* + * Cavium ThunderX memory controller kernel module + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright Cavium, Inc. (C) 2015-2017. All rights reserved. + * + */ + +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/string.h> +#include <linux/stop_machine.h> +#include <linux/delay.h> +#include <linux/sizes.h> +#include <linux/atomic.h> +#include <linux/bitfield.h> +#include <linux/circ_buf.h> + +#include <asm/page.h> + +#include "edac_module.h" + +#define phys_to_pfn(phys) (PFN_DOWN(phys)) + +#define THUNDERX_NODE GENMASK(45, 44) + +enum { + ERR_CORRECTED = 1, + ERR_UNCORRECTED = 2, + ERR_UNKNOWN = 3, +}; + +#define MAX_SYNDROME_REGS 4 + +struct error_syndrome { + u64 reg[MAX_SYNDROME_REGS]; +}; + +struct error_descr { + int type; + u64 mask; + char *descr; +}; + +static void decode_register(char *str, size_t size, + const struct error_descr *descr, + const uint64_t reg) +{ + int ret = 0; + + while (descr->type && descr->mask && descr->descr) { + if (reg & descr->mask) { + ret = snprintf(str, size, "\n\t%s, %s", + descr->type == ERR_CORRECTED ? + "Corrected" : "Uncorrected", + descr->descr); + str += ret; + size -= ret; + } + descr++; + } +} + +static unsigned long get_bits(unsigned long data, int pos, int width) +{ + return (data >> pos) & ((1 << width) - 1); +} + +#define L2C_CTL 0x87E080800000 +#define L2C_CTL_DISIDXALIAS BIT(0) + +#define PCI_DEVICE_ID_THUNDER_LMC 0xa022 + +#define LMC_FADR 0x20 +#define LMC_FADR_FDIMM(x) ((x >> 37) & 0x1) +#define LMC_FADR_FBUNK(x) ((x >> 36) & 0x1) +#define LMC_FADR_FBANK(x) ((x >> 32) & 0xf) +#define LMC_FADR_FROW(x) ((x >> 14) & 0xffff) +#define LMC_FADR_FCOL(x) ((x >> 0) & 0x1fff) + +#define LMC_NXM_FADR 0x28 +#define LMC_ECC_SYND 0x38 + +#define LMC_ECC_PARITY_TEST 0x108 + +#define LMC_INT_W1S 0x150 + +#define LMC_INT_ENA_W1C 0x158 +#define LMC_INT_ENA_W1S 0x160 + +#define LMC_CONFIG 0x188 + +#define LMC_CONFIG_BG2 BIT(62) +#define LMC_CONFIG_RANK_ENA BIT(42) +#define LMC_CONFIG_PBANK_LSB(x) (((x) >> 5) & 0xF) +#define LMC_CONFIG_ROW_LSB(x) (((x) >> 2) & 0x7) + +#define LMC_CONTROL 0x190 +#define LMC_CONTROL_XOR_BANK BIT(16) + +#define LMC_INT 0x1F0 + +#define LMC_INT_DDR_ERR BIT(11) +#define LMC_INT_DED_ERR (0xFUL << 5) +#define LMC_INT_SEC_ERR (0xFUL << 1) +#define LMC_INT_NXM_WR_MASK BIT(0) + +#define LMC_DDR_PLL_CTL 0x258 +#define LMC_DDR_PLL_CTL_DDR4 BIT(29) + +#define LMC_FADR_SCRAMBLED 0x330 + +#define LMC_INT_UE (LMC_INT_DDR_ERR | LMC_INT_DED_ERR | \ + LMC_INT_NXM_WR_MASK) + +#define LMC_INT_CE (LMC_INT_SEC_ERR) + +static const struct error_descr lmc_errors[] = { + { + .type = ERR_CORRECTED, + .mask = LMC_INT_SEC_ERR, + .descr = "Single-bit ECC error", + }, + { + .type = ERR_UNCORRECTED, + .mask = LMC_INT_DDR_ERR, + .descr = "DDR chip error", + }, + { + .type = ERR_UNCORRECTED, + .mask = LMC_INT_DED_ERR, + .descr = "Double-bit ECC error", + }, + { + .type = ERR_UNCORRECTED, + .mask = LMC_INT_NXM_WR_MASK, + .descr = "Non-existent memory write", + }, + {0, 0, NULL}, +}; + +#define LMC_INT_EN_DDR_ERROR_ALERT_ENA BIT(5) +#define LMC_INT_EN_DLCRAM_DED_ERR BIT(4) +#define LMC_INT_EN_DLCRAM_SEC_ERR BIT(3) +#define LMC_INT_INTR_DED_ENA BIT(2) +#define LMC_INT_INTR_SEC_ENA BIT(1) +#define LMC_INT_INTR_NXM_WR_ENA BIT(0) + +#define LMC_INT_ENA_ALL GENMASK(5, 0) + +#define LMC_DDR_PLL_CTL 0x258 +#define LMC_DDR_PLL_CTL_DDR4 BIT(29) + +#define LMC_CONTROL 0x190 +#define LMC_CONTROL_RDIMM BIT(0) + +#define LMC_SCRAM_FADR 0x330 + +#define LMC_CHAR_MASK0 0x228 +#define LMC_CHAR_MASK2 0x238 + +#define RING_ENTRIES 8 + +struct debugfs_entry { + const char *name; + umode_t mode; + const struct file_operations fops; +}; + +struct lmc_err_ctx { + u64 reg_int; + u64 reg_fadr; + u64 reg_nxm_fadr; + u64 reg_scram_fadr; + u64 reg_ecc_synd; +}; + +struct thunderx_lmc { + void __iomem *regs; + struct pci_dev *pdev; + struct msix_entry msix_ent; + + atomic_t ecc_int; + + u64 mask0; + u64 mask2; + u64 parity_test; + u64 node; + + int xbits; + int bank_width; + int pbank_lsb; + int dimm_lsb; + int rank_lsb; + int bank_lsb; + int row_lsb; + int col_hi_lsb; + + int xor_bank; + int l2c_alias; + + struct page *mem; + + struct lmc_err_ctx err_ctx[RING_ENTRIES]; + unsigned long ring_head; + unsigned long ring_tail; +}; + +#define ring_pos(pos, size) ((pos) & (size - 1)) + +#define DEBUGFS_STRUCT(_name, _mode, _write, _read) \ +static struct debugfs_entry debugfs_##_name = { \ + .name = __stringify(_name), \ + .mode = VERIFY_OCTAL_PERMISSIONS(_mode), \ + .fops = { \ + .open = simple_open, \ + .write = _write, \ + .read = _read, \ + .llseek = generic_file_llseek, \ + }, \ +} + +#define DEBUGFS_FIELD_ATTR(_type, _field) \ +static ssize_t thunderx_##_type##_##_field##_read(struct file *file, \ + char __user *data, \ + size_t count, loff_t *ppos) \ +{ \ + struct thunderx_##_type *pdata = file->private_data; \ + char buf[20]; \ + \ + snprintf(buf, count, "0x%016llx", pdata->_field); \ + return simple_read_from_buffer(data, count, ppos, \ + buf, sizeof(buf)); \ +} \ + \ +static ssize_t thunderx_##_type##_##_field##_write(struct file *file, \ + const char __user *data, \ + size_t count, loff_t *ppos) \ +{ \ + struct thunderx_##_type *pdata = file->private_data; \ + int res; \ + \ + res = kstrtoull_from_user(data, count, 0, &pdata->_field); \ + \ + return res ? res : count; \ +} \ + \ +DEBUGFS_STRUCT(_field, 0600, \ + thunderx_##_type##_##_field##_write, \ + thunderx_##_type##_##_field##_read) \ + +#define DEBUGFS_REG_ATTR(_type, _name, _reg) \ +static ssize_t thunderx_##_type##_##_name##_read(struct file *file, \ + char __user *data, \ + size_t count, loff_t *ppos) \ +{ \ + struct thunderx_##_type *pdata = file->private_data; \ + char buf[20]; \ + \ + sprintf(buf, "0x%016llx", readq(pdata->regs + _reg)); \ + return simple_read_from_buffer(data, count, ppos, \ + buf, sizeof(buf)); \ +} \ + \ +static ssize_t thunderx_##_type##_##_name##_write(struct file *file, \ + const char __user *data, \ + size_t count, loff_t *ppos) \ +{ \ + struct thunderx_##_type *pdata = file->private_data; \ + u64 val; \ + int res; \ + \ + res = kstrtoull_from_user(data, count, 0, &val); \ + \ + if (!res) { \ + writeq(val, pdata->regs + _reg); \ + res = count; \ + } \ + \ + return res; \ +} \ + \ +DEBUGFS_STRUCT(_name, 0600, \ + thunderx_##_type##_##_name##_write, \ + thunderx_##_type##_##_name##_read) + +#define LMC_DEBUGFS_ENT(_field) DEBUGFS_FIELD_ATTR(lmc, _field) + +/* + * To get an ECC error injected, the following steps are needed: + * - Setup the ECC injection by writing the appropriate parameters: + * echo <bit mask value> > /sys/kernel/debug/<device number>/ecc_mask0 + * echo <bit mask value> > /sys/kernel/debug/<device number>/ecc_mask2 + * echo 0x802 > /sys/kernel/debug/<device number>/ecc_parity_test + * - Do the actual injection: + * echo 1 > /sys/kernel/debug/<device number>/inject_ecc + */ +static ssize_t thunderx_lmc_inject_int_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct thunderx_lmc *lmc = file->private_data; + u64 val; + int res; + + res = kstrtoull_from_user(data, count, 0, &val); + + if (!res) { + /* Trigger the interrupt */ + writeq(val, lmc->regs + LMC_INT_W1S); + res = count; + } + + return res; +} + +static ssize_t thunderx_lmc_int_read(struct file *file, + char __user *data, + size_t count, loff_t *ppos) +{ + struct thunderx_lmc *lmc = file->private_data; + char buf[20]; + u64 lmc_int = readq(lmc->regs + LMC_INT); + + snprintf(buf, sizeof(buf), "0x%016llx", lmc_int); + return simple_read_from_buffer(data, count, ppos, buf, sizeof(buf)); +} + +#define TEST_PATTERN 0xa5 + +static int inject_ecc_fn(void *arg) +{ + struct thunderx_lmc *lmc = arg; + uintptr_t addr, phys; + unsigned int cline_size = cache_line_size(); + const unsigned int lines = PAGE_SIZE / cline_size; + unsigned int i, cl_idx; + + addr = (uintptr_t)page_address(lmc->mem); + phys = (uintptr_t)page_to_phys(lmc->mem); + + cl_idx = (phys & 0x7f) >> 4; + lmc->parity_test &= ~(7ULL << 8); + lmc->parity_test |= (cl_idx << 8); + + writeq(lmc->mask0, lmc->regs + LMC_CHAR_MASK0); + writeq(lmc->mask2, lmc->regs + LMC_CHAR_MASK2); + writeq(lmc->parity_test, lmc->regs + LMC_ECC_PARITY_TEST); + + readq(lmc->regs + LMC_CHAR_MASK0); + readq(lmc->regs + LMC_CHAR_MASK2); + readq(lmc->regs + LMC_ECC_PARITY_TEST); + + for (i = 0; i < lines; i++) { + memset((void *)addr, TEST_PATTERN, cline_size); + barrier(); + + /* + * Flush L1 cachelines to the PoC (L2). + * This will cause cacheline eviction to the L2. + */ + asm volatile("dc civac, %0\n" + "dsb sy\n" + : : "r"(addr + i * cline_size)); + } + + for (i = 0; i < lines; i++) { + /* + * Flush L2 cachelines to the DRAM. + * This will cause cacheline eviction to the DRAM + * and ECC corruption according to the masks set. + */ + __asm__ volatile("sys #0,c11,C1,#2, %0\n" + : : "r"(phys + i * cline_size)); + } + + for (i = 0; i < lines; i++) { + /* + * Invalidate L2 cachelines. + * The subsequent load will cause cacheline fetch + * from the DRAM and an error interrupt + */ + __asm__ volatile("sys #0,c11,C1,#1, %0" + : : "r"(phys + i * cline_size)); + } + + for (i = 0; i < lines; i++) { + /* + * Invalidate L1 cachelines. + * The subsequent load will cause cacheline fetch + * from the L2 and/or DRAM + */ + asm volatile("dc ivac, %0\n" + "dsb sy\n" + : : "r"(addr + i * cline_size)); + } + + return 0; +} + +static ssize_t thunderx_lmc_inject_ecc_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct thunderx_lmc *lmc = file->private_data; + unsigned int cline_size = cache_line_size(); + u8 *tmp; + void __iomem *addr; + unsigned int offs, timeout = 100000; + + atomic_set(&lmc->ecc_int, 0); + + lmc->mem = alloc_pages_node(lmc->node, GFP_KERNEL, 0); + if (!lmc->mem) + return -ENOMEM; + + tmp = kmalloc(cline_size, GFP_KERNEL); + if (!tmp) { + __free_pages(lmc->mem, 0); + return -ENOMEM; + } + + addr = page_address(lmc->mem); + + while (!atomic_read(&lmc->ecc_int) && timeout--) { + stop_machine(inject_ecc_fn, lmc, NULL); + + for (offs = 0; offs < PAGE_SIZE; offs += cline_size) { + /* + * Do a load from the previously rigged location + * This should generate an error interrupt. + */ + memcpy(tmp, addr + offs, cline_size); + asm volatile("dsb ld\n"); + } + } + + kfree(tmp); + __free_pages(lmc->mem, 0); + + return count; +} + +LMC_DEBUGFS_ENT(mask0); +LMC_DEBUGFS_ENT(mask2); +LMC_DEBUGFS_ENT(parity_test); + +DEBUGFS_STRUCT(inject_int, 0200, thunderx_lmc_inject_int_write, NULL); +DEBUGFS_STRUCT(inject_ecc, 0200, thunderx_lmc_inject_ecc_write, NULL); +DEBUGFS_STRUCT(int_w1c, 0400, NULL, thunderx_lmc_int_read); + +static struct debugfs_entry *lmc_dfs_ents[] = { + &debugfs_mask0, + &debugfs_mask2, + &debugfs_parity_test, + &debugfs_inject_ecc, + &debugfs_inject_int, + &debugfs_int_w1c, +}; + +static int thunderx_create_debugfs_nodes(struct dentry *parent, + struct debugfs_entry *attrs[], + void *data, + size_t num) +{ + int i; + struct dentry *ent; + + if (!IS_ENABLED(CONFIG_EDAC_DEBUG)) + return 0; + + if (!parent) + return -ENOENT; + + for (i = 0; i < num; i++) { + ent = edac_debugfs_create_file(attrs[i]->name, attrs[i]->mode, + parent, data, &attrs[i]->fops); + + if (!ent) + break; + } + + return i; +} + +static phys_addr_t thunderx_faddr_to_phys(u64 faddr, struct thunderx_lmc *lmc) +{ + phys_addr_t addr = 0; + int bank, xbits; + + addr |= lmc->node << 40; + addr |= LMC_FADR_FDIMM(faddr) << lmc->dimm_lsb; + addr |= LMC_FADR_FBUNK(faddr) << lmc->rank_lsb; + addr |= LMC_FADR_FROW(faddr) << lmc->row_lsb; + addr |= (LMC_FADR_FCOL(faddr) >> 4) << lmc->col_hi_lsb; + + bank = LMC_FADR_FBANK(faddr) << lmc->bank_lsb; + + if (lmc->xor_bank) + bank ^= get_bits(addr, 12 + lmc->xbits, lmc->bank_width); + + addr |= bank << lmc->bank_lsb; + + xbits = PCI_FUNC(lmc->pdev->devfn); + + if (lmc->l2c_alias) + xbits ^= get_bits(addr, 20, lmc->xbits) ^ + get_bits(addr, 12, lmc->xbits); + + addr |= xbits << 7; + + return addr; +} + +static unsigned int thunderx_get_num_lmcs(unsigned int node) +{ + unsigned int number = 0; + struct pci_dev *pdev = NULL; + + do { + pdev = pci_get_device(PCI_VENDOR_ID_CAVIUM, + PCI_DEVICE_ID_THUNDER_LMC, + pdev); + if (pdev) { +#ifdef CONFIG_NUMA + if (pdev->dev.numa_node == node) + number++; +#else + number++; +#endif + } + } while (pdev); + + return number; +} + +#define LMC_MESSAGE_SIZE 120 +#define LMC_OTHER_SIZE (50 * ARRAY_SIZE(lmc_errors)) + +static irqreturn_t thunderx_lmc_err_isr(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct thunderx_lmc *lmc = mci->pvt_info; + + unsigned long head = ring_pos(lmc->ring_head, ARRAY_SIZE(lmc->err_ctx)); + struct lmc_err_ctx *ctx = &lmc->err_ctx[head]; + + writeq(0, lmc->regs + LMC_CHAR_MASK0); + writeq(0, lmc->regs + LMC_CHAR_MASK2); + writeq(0x2, lmc->regs + LMC_ECC_PARITY_TEST); + + ctx->reg_int = readq(lmc->regs + LMC_INT); + ctx->reg_fadr = readq(lmc->regs + LMC_FADR); + ctx->reg_nxm_fadr = readq(lmc->regs + LMC_NXM_FADR); + ctx->reg_scram_fadr = readq(lmc->regs + LMC_SCRAM_FADR); + ctx->reg_ecc_synd = readq(lmc->regs + LMC_ECC_SYND); + + lmc->ring_head++; + + atomic_set(&lmc->ecc_int, 1); + + /* Clear the interrupt */ + writeq(ctx->reg_int, lmc->regs + LMC_INT); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_lmc_threaded_isr(int irq, void *dev_id) +{ + struct mem_ctl_info *mci = dev_id; + struct thunderx_lmc *lmc = mci->pvt_info; + phys_addr_t phys_addr; + + unsigned long tail; + struct lmc_err_ctx *ctx; + + irqreturn_t ret = IRQ_NONE; + + char *msg; + char *other; + + msg = kmalloc(LMC_MESSAGE_SIZE, GFP_KERNEL); + other = kmalloc(LMC_OTHER_SIZE, GFP_KERNEL); + + if (!msg || !other) + goto err_free; + + while (CIRC_CNT(lmc->ring_head, lmc->ring_tail, + ARRAY_SIZE(lmc->err_ctx))) { + tail = ring_pos(lmc->ring_tail, ARRAY_SIZE(lmc->err_ctx)); + + ctx = &lmc->err_ctx[tail]; + + dev_dbg(&lmc->pdev->dev, "LMC_INT: %016llx\n", + ctx->reg_int); + dev_dbg(&lmc->pdev->dev, "LMC_FADR: %016llx\n", + ctx->reg_fadr); + dev_dbg(&lmc->pdev->dev, "LMC_NXM_FADR: %016llx\n", + ctx->reg_nxm_fadr); + dev_dbg(&lmc->pdev->dev, "LMC_SCRAM_FADR: %016llx\n", + ctx->reg_scram_fadr); + dev_dbg(&lmc->pdev->dev, "LMC_ECC_SYND: %016llx\n", + ctx->reg_ecc_synd); + + snprintf(msg, LMC_MESSAGE_SIZE, + "DIMM %lld rank %lld bank %lld row %lld col %lld", + LMC_FADR_FDIMM(ctx->reg_scram_fadr), + LMC_FADR_FBUNK(ctx->reg_scram_fadr), + LMC_FADR_FBANK(ctx->reg_scram_fadr), + LMC_FADR_FROW(ctx->reg_scram_fadr), + LMC_FADR_FCOL(ctx->reg_scram_fadr)); + + decode_register(other, LMC_OTHER_SIZE, lmc_errors, + ctx->reg_int); + + phys_addr = thunderx_faddr_to_phys(ctx->reg_fadr, lmc); + + if (ctx->reg_int & LMC_INT_UE) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + phys_to_pfn(phys_addr), + offset_in_page(phys_addr), + 0, -1, -1, -1, msg, other); + else if (ctx->reg_int & LMC_INT_CE) + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + phys_to_pfn(phys_addr), + offset_in_page(phys_addr), + 0, -1, -1, -1, msg, other); + + lmc->ring_tail++; + } + + ret = IRQ_HANDLED; + +err_free: + kfree(msg); + kfree(other); + + return ret; +} + +static const struct pci_device_id thunderx_lmc_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_LMC) }, + { 0, }, +}; + +static inline int pci_dev_to_mc_idx(struct pci_dev *pdev) +{ + int node = dev_to_node(&pdev->dev); + int ret = PCI_FUNC(pdev->devfn); + + ret += max(node, 0) << 3; + + return ret; +} + +static int thunderx_lmc_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct thunderx_lmc *lmc; + struct edac_mc_layer layer; + struct mem_ctl_info *mci; + u64 lmc_control, lmc_ddr_pll_ctl, lmc_config; + int ret; + u64 lmc_int; + void *l2c_ioaddr; + + layer.type = EDAC_MC_LAYER_SLOT; + layer.size = 2; + layer.is_virt_csrow = false; + + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_lmc"); + if (ret) { + dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret); + return ret; + } + + mci = edac_mc_alloc(pci_dev_to_mc_idx(pdev), 1, &layer, + sizeof(struct thunderx_lmc)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + lmc = mci->pvt_info; + + pci_set_drvdata(pdev, mci); + + lmc->regs = pcim_iomap_table(pdev)[0]; + + lmc_control = readq(lmc->regs + LMC_CONTROL); + lmc_ddr_pll_ctl = readq(lmc->regs + LMC_DDR_PLL_CTL); + lmc_config = readq(lmc->regs + LMC_CONFIG); + + if (lmc_control & LMC_CONTROL_RDIMM) { + mci->mtype_cap = FIELD_GET(LMC_DDR_PLL_CTL_DDR4, + lmc_ddr_pll_ctl) ? + MEM_RDDR4 : MEM_RDDR3; + } else { + mci->mtype_cap = FIELD_GET(LMC_DDR_PLL_CTL_DDR4, + lmc_ddr_pll_ctl) ? + MEM_DDR4 : MEM_DDR3; + } + + mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = "thunderx-lmc"; + mci->ctl_name = "thunderx-lmc"; + mci->dev_name = dev_name(&pdev->dev); + mci->scrub_mode = SCRUB_NONE; + + lmc->pdev = pdev; + lmc->msix_ent.entry = 0; + + lmc->ring_head = 0; + lmc->ring_tail = 0; + + ret = pci_enable_msix_exact(pdev, &lmc->msix_ent, 1); + if (ret) { + dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret); + goto err_free; + } + + ret = devm_request_threaded_irq(&pdev->dev, lmc->msix_ent.vector, + thunderx_lmc_err_isr, + thunderx_lmc_threaded_isr, 0, + "[EDAC] ThunderX LMC", mci); + if (ret) { + dev_err(&pdev->dev, "Cannot set ISR: %d\n", ret); + goto err_free; + } + + lmc->node = FIELD_GET(THUNDERX_NODE, pci_resource_start(pdev, 0)); + + lmc->xbits = thunderx_get_num_lmcs(lmc->node) >> 1; + lmc->bank_width = (FIELD_GET(LMC_DDR_PLL_CTL_DDR4, lmc_ddr_pll_ctl) && + FIELD_GET(LMC_CONFIG_BG2, lmc_config)) ? 4 : 3; + + lmc->pbank_lsb = (lmc_config >> 5) & 0xf; + lmc->dimm_lsb = 28 + lmc->pbank_lsb + lmc->xbits; + lmc->rank_lsb = lmc->dimm_lsb; + lmc->rank_lsb -= FIELD_GET(LMC_CONFIG_RANK_ENA, lmc_config) ? 1 : 0; + lmc->bank_lsb = 7 + lmc->xbits; + lmc->row_lsb = 14 + LMC_CONFIG_ROW_LSB(lmc_config) + lmc->xbits; + + lmc->col_hi_lsb = lmc->bank_lsb + lmc->bank_width; + + lmc->xor_bank = lmc_control & LMC_CONTROL_XOR_BANK; + + l2c_ioaddr = ioremap(L2C_CTL | FIELD_PREP(THUNDERX_NODE, lmc->node), PAGE_SIZE); + if (!l2c_ioaddr) { + dev_err(&pdev->dev, "Cannot map L2C_CTL\n"); + ret = -ENOMEM; + goto err_free; + } + + lmc->l2c_alias = !(readq(l2c_ioaddr) & L2C_CTL_DISIDXALIAS); + + iounmap(l2c_ioaddr); + + ret = edac_mc_add_mc(mci); + if (ret) { + dev_err(&pdev->dev, "Cannot add the MC: %d\n", ret); + goto err_free; + } + + lmc_int = readq(lmc->regs + LMC_INT); + writeq(lmc_int, lmc->regs + LMC_INT); + + writeq(LMC_INT_ENA_ALL, lmc->regs + LMC_INT_ENA_W1S); + + if (IS_ENABLED(CONFIG_EDAC_DEBUG)) { + ret = thunderx_create_debugfs_nodes(mci->debugfs, + lmc_dfs_ents, + lmc, + ARRAY_SIZE(lmc_dfs_ents)); + + if (ret != ARRAY_SIZE(lmc_dfs_ents)) { + dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n", + ret, ret >= 0 ? " created" : ""); + } + } + + return 0; + +err_free: + pci_set_drvdata(pdev, NULL); + edac_mc_free(mci); + + return ret; +} + +static void thunderx_lmc_remove(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci = pci_get_drvdata(pdev); + struct thunderx_lmc *lmc = mci->pvt_info; + + writeq(LMC_INT_ENA_ALL, lmc->regs + LMC_INT_ENA_W1C); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); +} + +MODULE_DEVICE_TABLE(pci, thunderx_lmc_pci_tbl); + +static struct pci_driver thunderx_lmc_driver = { + .name = "thunderx_lmc_edac", + .probe = thunderx_lmc_probe, + .remove = thunderx_lmc_remove, + .id_table = thunderx_lmc_pci_tbl, +}; + +/*---------------------- OCX driver ---------------------------------*/ + +#define PCI_DEVICE_ID_THUNDER_OCX 0xa013 + +#define OCX_LINK_INTS 3 +#define OCX_INTS (OCX_LINK_INTS + 1) +#define OCX_RX_LANES 24 +#define OCX_RX_LANE_STATS 15 + +#define OCX_COM_INT 0x100 +#define OCX_COM_INT_W1S 0x108 +#define OCX_COM_INT_ENA_W1S 0x110 +#define OCX_COM_INT_ENA_W1C 0x118 + +#define OCX_COM_IO_BADID BIT(54) +#define OCX_COM_MEM_BADID BIT(53) +#define OCX_COM_COPR_BADID BIT(52) +#define OCX_COM_WIN_REQ_BADID BIT(51) +#define OCX_COM_WIN_REQ_TOUT BIT(50) +#define OCX_COM_RX_LANE GENMASK(23, 0) + +#define OCX_COM_INT_CE (OCX_COM_IO_BADID | \ + OCX_COM_MEM_BADID | \ + OCX_COM_COPR_BADID | \ + OCX_COM_WIN_REQ_BADID | \ + OCX_COM_WIN_REQ_TOUT) + +static const struct error_descr ocx_com_errors[] = { + { + .type = ERR_CORRECTED, + .mask = OCX_COM_IO_BADID, + .descr = "Invalid IO transaction node ID", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_MEM_BADID, + .descr = "Invalid memory transaction node ID", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_COPR_BADID, + .descr = "Invalid coprocessor transaction node ID", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_WIN_REQ_BADID, + .descr = "Invalid SLI transaction node ID", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_WIN_REQ_TOUT, + .descr = "Window/core request timeout", + }, + {0, 0, NULL}, +}; + +#define OCX_COM_LINKX_INT(x) (0x120 + (x) * 8) +#define OCX_COM_LINKX_INT_W1S(x) (0x140 + (x) * 8) +#define OCX_COM_LINKX_INT_ENA_W1S(x) (0x160 + (x) * 8) +#define OCX_COM_LINKX_INT_ENA_W1C(x) (0x180 + (x) * 8) + +#define OCX_COM_LINK_BAD_WORD BIT(13) +#define OCX_COM_LINK_ALIGN_FAIL BIT(12) +#define OCX_COM_LINK_ALIGN_DONE BIT(11) +#define OCX_COM_LINK_UP BIT(10) +#define OCX_COM_LINK_STOP BIT(9) +#define OCX_COM_LINK_BLK_ERR BIT(8) +#define OCX_COM_LINK_REINIT BIT(7) +#define OCX_COM_LINK_LNK_DATA BIT(6) +#define OCX_COM_LINK_RXFIFO_DBE BIT(5) +#define OCX_COM_LINK_RXFIFO_SBE BIT(4) +#define OCX_COM_LINK_TXFIFO_DBE BIT(3) +#define OCX_COM_LINK_TXFIFO_SBE BIT(2) +#define OCX_COM_LINK_REPLAY_DBE BIT(1) +#define OCX_COM_LINK_REPLAY_SBE BIT(0) + +static const struct error_descr ocx_com_link_errors[] = { + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_REPLAY_SBE, + .descr = "Replay buffer single-bit error", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_TXFIFO_SBE, + .descr = "TX FIFO single-bit error", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_RXFIFO_SBE, + .descr = "RX FIFO single-bit error", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_BLK_ERR, + .descr = "Block code error", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_ALIGN_FAIL, + .descr = "Link alignment failure", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_COM_LINK_BAD_WORD, + .descr = "Bad code word", + }, + { + .type = ERR_UNCORRECTED, + .mask = OCX_COM_LINK_REPLAY_DBE, + .descr = "Replay buffer double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = OCX_COM_LINK_TXFIFO_DBE, + .descr = "TX FIFO double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = OCX_COM_LINK_RXFIFO_DBE, + .descr = "RX FIFO double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = OCX_COM_LINK_STOP, + .descr = "Link stopped", + }, + {0, 0, NULL}, +}; + +#define OCX_COM_LINK_INT_UE (OCX_COM_LINK_REPLAY_DBE | \ + OCX_COM_LINK_TXFIFO_DBE | \ + OCX_COM_LINK_RXFIFO_DBE | \ + OCX_COM_LINK_STOP) + +#define OCX_COM_LINK_INT_CE (OCX_COM_LINK_REPLAY_SBE | \ + OCX_COM_LINK_TXFIFO_SBE | \ + OCX_COM_LINK_RXFIFO_SBE | \ + OCX_COM_LINK_BLK_ERR | \ + OCX_COM_LINK_ALIGN_FAIL | \ + OCX_COM_LINK_BAD_WORD) + +#define OCX_LNE_INT(x) (0x8018 + (x) * 0x100) +#define OCX_LNE_INT_EN(x) (0x8020 + (x) * 0x100) +#define OCX_LNE_BAD_CNT(x) (0x8028 + (x) * 0x100) +#define OCX_LNE_CFG(x) (0x8000 + (x) * 0x100) +#define OCX_LNE_STAT(x, y) (0x8040 + (x) * 0x100 + (y) * 8) + +#define OCX_LNE_CFG_RX_BDRY_LOCK_DIS BIT(8) +#define OCX_LNE_CFG_RX_STAT_WRAP_DIS BIT(2) +#define OCX_LNE_CFG_RX_STAT_RDCLR BIT(1) +#define OCX_LNE_CFG_RX_STAT_ENA BIT(0) + + +#define OCX_LANE_BAD_64B67B BIT(8) +#define OCX_LANE_DSKEW_FIFO_OVFL BIT(5) +#define OCX_LANE_SCRM_SYNC_LOSS BIT(4) +#define OCX_LANE_UKWN_CNTL_WORD BIT(3) +#define OCX_LANE_CRC32_ERR BIT(2) +#define OCX_LANE_BDRY_SYNC_LOSS BIT(1) +#define OCX_LANE_SERDES_LOCK_LOSS BIT(0) + +#define OCX_COM_LANE_INT_UE (0) +#define OCX_COM_LANE_INT_CE (OCX_LANE_SERDES_LOCK_LOSS | \ + OCX_LANE_BDRY_SYNC_LOSS | \ + OCX_LANE_CRC32_ERR | \ + OCX_LANE_UKWN_CNTL_WORD | \ + OCX_LANE_SCRM_SYNC_LOSS | \ + OCX_LANE_DSKEW_FIFO_OVFL | \ + OCX_LANE_BAD_64B67B) + +static const struct error_descr ocx_lane_errors[] = { + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_SERDES_LOCK_LOSS, + .descr = "RX SerDes lock lost", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_BDRY_SYNC_LOSS, + .descr = "RX word boundary lost", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_CRC32_ERR, + .descr = "CRC32 error", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_UKWN_CNTL_WORD, + .descr = "Unknown control word", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_SCRM_SYNC_LOSS, + .descr = "Scrambler synchronization lost", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_DSKEW_FIFO_OVFL, + .descr = "RX deskew FIFO overflow", + }, + { + .type = ERR_CORRECTED, + .mask = OCX_LANE_BAD_64B67B, + .descr = "Bad 64B/67B codeword", + }, + {0, 0, NULL}, +}; + +#define OCX_LNE_INT_ENA_ALL (GENMASK(9, 8) | GENMASK(6, 0)) +#define OCX_COM_INT_ENA_ALL (GENMASK(54, 50) | GENMASK(23, 0)) +#define OCX_COM_LINKX_INT_ENA_ALL (GENMASK(13, 12) | \ + GENMASK(9, 7) | GENMASK(5, 0)) + +#define OCX_TLKX_ECC_CTL(x) (0x10018 + (x) * 0x2000) +#define OCX_RLKX_ECC_CTL(x) (0x18018 + (x) * 0x2000) + +struct ocx_com_err_ctx { + u64 reg_com_int; + u64 reg_lane_int[OCX_RX_LANES]; + u64 reg_lane_stat11[OCX_RX_LANES]; +}; + +struct ocx_link_err_ctx { + u64 reg_com_link_int; + int link; +}; + +struct thunderx_ocx { + void __iomem *regs; + int com_link; + struct pci_dev *pdev; + struct edac_device_ctl_info *edac_dev; + + struct dentry *debugfs; + struct msix_entry msix_ent[OCX_INTS]; + + struct ocx_com_err_ctx com_err_ctx[RING_ENTRIES]; + struct ocx_link_err_ctx link_err_ctx[RING_ENTRIES]; + + unsigned long com_ring_head; + unsigned long com_ring_tail; + + unsigned long link_ring_head; + unsigned long link_ring_tail; +}; + +#define OCX_MESSAGE_SIZE SZ_1K +#define OCX_OTHER_SIZE (50 * ARRAY_SIZE(ocx_com_link_errors)) + +/* This handler is threaded */ +static irqreturn_t thunderx_ocx_com_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx, + msix_ent[msix->entry]); + + int lane; + unsigned long head = ring_pos(ocx->com_ring_head, + ARRAY_SIZE(ocx->com_err_ctx)); + struct ocx_com_err_ctx *ctx = &ocx->com_err_ctx[head]; + + ctx->reg_com_int = readq(ocx->regs + OCX_COM_INT); + + for (lane = 0; lane < OCX_RX_LANES; lane++) { + ctx->reg_lane_int[lane] = + readq(ocx->regs + OCX_LNE_INT(lane)); + ctx->reg_lane_stat11[lane] = + readq(ocx->regs + OCX_LNE_STAT(lane, 11)); + + writeq(ctx->reg_lane_int[lane], ocx->regs + OCX_LNE_INT(lane)); + } + + writeq(ctx->reg_com_int, ocx->regs + OCX_COM_INT); + + ocx->com_ring_head++; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx, + msix_ent[msix->entry]); + + irqreturn_t ret = IRQ_NONE; + + unsigned long tail; + struct ocx_com_err_ctx *ctx; + int lane; + char *msg; + char *other; + + msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL); + other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL); + + if (!msg || !other) + goto err_free; + + while (CIRC_CNT(ocx->com_ring_head, ocx->com_ring_tail, + ARRAY_SIZE(ocx->com_err_ctx))) { + tail = ring_pos(ocx->com_ring_tail, + ARRAY_SIZE(ocx->com_err_ctx)); + ctx = &ocx->com_err_ctx[tail]; + + snprintf(msg, OCX_MESSAGE_SIZE, "%s: OCX_COM_INT: %016llx", + ocx->edac_dev->ctl_name, ctx->reg_com_int); + + decode_register(other, OCX_OTHER_SIZE, + ocx_com_errors, ctx->reg_com_int); + + strlcat(msg, other, OCX_MESSAGE_SIZE); + + for (lane = 0; lane < OCX_RX_LANES; lane++) + if (ctx->reg_com_int & BIT(lane)) { + snprintf(other, OCX_OTHER_SIZE, + "\n\tOCX_LNE_INT[%02d]: %016llx OCX_LNE_STAT11[%02d]: %016llx", + lane, ctx->reg_lane_int[lane], + lane, ctx->reg_lane_stat11[lane]); + + strlcat(msg, other, OCX_MESSAGE_SIZE); + + decode_register(other, OCX_OTHER_SIZE, + ocx_lane_errors, + ctx->reg_lane_int[lane]); + strlcat(msg, other, OCX_MESSAGE_SIZE); + } + + if (ctx->reg_com_int & OCX_COM_INT_CE) + edac_device_handle_ce(ocx->edac_dev, 0, 0, msg); + + ocx->com_ring_tail++; + } + + ret = IRQ_HANDLED; + +err_free: + kfree(other); + kfree(msg); + + return ret; +} + +static irqreturn_t thunderx_ocx_lnk_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx, + msix_ent[msix->entry]); + unsigned long head = ring_pos(ocx->link_ring_head, + ARRAY_SIZE(ocx->link_err_ctx)); + struct ocx_link_err_ctx *ctx = &ocx->link_err_ctx[head]; + + ctx->link = msix->entry; + ctx->reg_com_link_int = readq(ocx->regs + OCX_COM_LINKX_INT(ctx->link)); + + writeq(ctx->reg_com_link_int, ocx->regs + OCX_COM_LINKX_INT(ctx->link)); + + ocx->link_ring_head++; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_ocx *ocx = container_of(msix, struct thunderx_ocx, + msix_ent[msix->entry]); + irqreturn_t ret = IRQ_NONE; + unsigned long tail; + struct ocx_link_err_ctx *ctx; + + char *msg; + char *other; + + msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL); + other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL); + + if (!msg || !other) + goto err_free; + + while (CIRC_CNT(ocx->link_ring_head, ocx->link_ring_tail, + ARRAY_SIZE(ocx->link_err_ctx))) { + tail = ring_pos(ocx->link_ring_head, + ARRAY_SIZE(ocx->link_err_ctx)); + + ctx = &ocx->link_err_ctx[tail]; + + snprintf(msg, OCX_MESSAGE_SIZE, + "%s: OCX_COM_LINK_INT[%d]: %016llx", + ocx->edac_dev->ctl_name, + ctx->link, ctx->reg_com_link_int); + + decode_register(other, OCX_OTHER_SIZE, + ocx_com_link_errors, ctx->reg_com_link_int); + + strlcat(msg, other, OCX_MESSAGE_SIZE); + + if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE) + edac_device_handle_ue(ocx->edac_dev, 0, 0, msg); + else if (ctx->reg_com_link_int & OCX_COM_LINK_INT_CE) + edac_device_handle_ce(ocx->edac_dev, 0, 0, msg); + + ocx->link_ring_tail++; + } + + ret = IRQ_HANDLED; +err_free: + kfree(other); + kfree(msg); + + return ret; +} + +#define OCX_DEBUGFS_ATTR(_name, _reg) DEBUGFS_REG_ATTR(ocx, _name, _reg) + +OCX_DEBUGFS_ATTR(tlk0_ecc_ctl, OCX_TLKX_ECC_CTL(0)); +OCX_DEBUGFS_ATTR(tlk1_ecc_ctl, OCX_TLKX_ECC_CTL(1)); +OCX_DEBUGFS_ATTR(tlk2_ecc_ctl, OCX_TLKX_ECC_CTL(2)); + +OCX_DEBUGFS_ATTR(rlk0_ecc_ctl, OCX_RLKX_ECC_CTL(0)); +OCX_DEBUGFS_ATTR(rlk1_ecc_ctl, OCX_RLKX_ECC_CTL(1)); +OCX_DEBUGFS_ATTR(rlk2_ecc_ctl, OCX_RLKX_ECC_CTL(2)); + +OCX_DEBUGFS_ATTR(com_link0_int, OCX_COM_LINKX_INT_W1S(0)); +OCX_DEBUGFS_ATTR(com_link1_int, OCX_COM_LINKX_INT_W1S(1)); +OCX_DEBUGFS_ATTR(com_link2_int, OCX_COM_LINKX_INT_W1S(2)); + +OCX_DEBUGFS_ATTR(lne00_badcnt, OCX_LNE_BAD_CNT(0)); +OCX_DEBUGFS_ATTR(lne01_badcnt, OCX_LNE_BAD_CNT(1)); +OCX_DEBUGFS_ATTR(lne02_badcnt, OCX_LNE_BAD_CNT(2)); +OCX_DEBUGFS_ATTR(lne03_badcnt, OCX_LNE_BAD_CNT(3)); +OCX_DEBUGFS_ATTR(lne04_badcnt, OCX_LNE_BAD_CNT(4)); +OCX_DEBUGFS_ATTR(lne05_badcnt, OCX_LNE_BAD_CNT(5)); +OCX_DEBUGFS_ATTR(lne06_badcnt, OCX_LNE_BAD_CNT(6)); +OCX_DEBUGFS_ATTR(lne07_badcnt, OCX_LNE_BAD_CNT(7)); + +OCX_DEBUGFS_ATTR(lne08_badcnt, OCX_LNE_BAD_CNT(8)); +OCX_DEBUGFS_ATTR(lne09_badcnt, OCX_LNE_BAD_CNT(9)); +OCX_DEBUGFS_ATTR(lne10_badcnt, OCX_LNE_BAD_CNT(10)); +OCX_DEBUGFS_ATTR(lne11_badcnt, OCX_LNE_BAD_CNT(11)); +OCX_DEBUGFS_ATTR(lne12_badcnt, OCX_LNE_BAD_CNT(12)); +OCX_DEBUGFS_ATTR(lne13_badcnt, OCX_LNE_BAD_CNT(13)); +OCX_DEBUGFS_ATTR(lne14_badcnt, OCX_LNE_BAD_CNT(14)); +OCX_DEBUGFS_ATTR(lne15_badcnt, OCX_LNE_BAD_CNT(15)); + +OCX_DEBUGFS_ATTR(lne16_badcnt, OCX_LNE_BAD_CNT(16)); +OCX_DEBUGFS_ATTR(lne17_badcnt, OCX_LNE_BAD_CNT(17)); +OCX_DEBUGFS_ATTR(lne18_badcnt, OCX_LNE_BAD_CNT(18)); +OCX_DEBUGFS_ATTR(lne19_badcnt, OCX_LNE_BAD_CNT(19)); +OCX_DEBUGFS_ATTR(lne20_badcnt, OCX_LNE_BAD_CNT(20)); +OCX_DEBUGFS_ATTR(lne21_badcnt, OCX_LNE_BAD_CNT(21)); +OCX_DEBUGFS_ATTR(lne22_badcnt, OCX_LNE_BAD_CNT(22)); +OCX_DEBUGFS_ATTR(lne23_badcnt, OCX_LNE_BAD_CNT(23)); + +OCX_DEBUGFS_ATTR(com_int, OCX_COM_INT_W1S); + +static struct debugfs_entry *ocx_dfs_ents[] = { + &debugfs_tlk0_ecc_ctl, + &debugfs_tlk1_ecc_ctl, + &debugfs_tlk2_ecc_ctl, + + &debugfs_rlk0_ecc_ctl, + &debugfs_rlk1_ecc_ctl, + &debugfs_rlk2_ecc_ctl, + + &debugfs_com_link0_int, + &debugfs_com_link1_int, + &debugfs_com_link2_int, + + &debugfs_lne00_badcnt, + &debugfs_lne01_badcnt, + &debugfs_lne02_badcnt, + &debugfs_lne03_badcnt, + &debugfs_lne04_badcnt, + &debugfs_lne05_badcnt, + &debugfs_lne06_badcnt, + &debugfs_lne07_badcnt, + &debugfs_lne08_badcnt, + &debugfs_lne09_badcnt, + &debugfs_lne10_badcnt, + &debugfs_lne11_badcnt, + &debugfs_lne12_badcnt, + &debugfs_lne13_badcnt, + &debugfs_lne14_badcnt, + &debugfs_lne15_badcnt, + &debugfs_lne16_badcnt, + &debugfs_lne17_badcnt, + &debugfs_lne18_badcnt, + &debugfs_lne19_badcnt, + &debugfs_lne20_badcnt, + &debugfs_lne21_badcnt, + &debugfs_lne22_badcnt, + &debugfs_lne23_badcnt, + + &debugfs_com_int, +}; + +static const struct pci_device_id thunderx_ocx_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_OCX) }, + { 0, }, +}; + +static void thunderx_ocx_clearstats(struct thunderx_ocx *ocx) +{ + int lane, stat, cfg; + + for (lane = 0; lane < OCX_RX_LANES; lane++) { + cfg = readq(ocx->regs + OCX_LNE_CFG(lane)); + cfg |= OCX_LNE_CFG_RX_STAT_RDCLR; + cfg &= ~OCX_LNE_CFG_RX_STAT_ENA; + writeq(cfg, ocx->regs + OCX_LNE_CFG(lane)); + + for (stat = 0; stat < OCX_RX_LANE_STATS; stat++) + readq(ocx->regs + OCX_LNE_STAT(lane, stat)); + } +} + +static int thunderx_ocx_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct thunderx_ocx *ocx; + struct edac_device_ctl_info *edac_dev; + char name[32]; + int idx; + int i; + int ret; + u64 reg; + + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_ocx"); + if (ret) { + dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret); + return ret; + } + + idx = edac_device_alloc_index(); + snprintf(name, sizeof(name), "OCX%d", idx); + edac_dev = edac_device_alloc_ctl_info(sizeof(struct thunderx_ocx), + name, 1, "CCPI", 1, + 0, NULL, 0, idx); + if (!edac_dev) { + dev_err(&pdev->dev, "Cannot allocate EDAC device\n"); + return -ENOMEM; + } + ocx = edac_dev->pvt_info; + ocx->edac_dev = edac_dev; + ocx->com_ring_head = 0; + ocx->com_ring_tail = 0; + ocx->link_ring_head = 0; + ocx->link_ring_tail = 0; + + ocx->regs = pcim_iomap_table(pdev)[0]; + if (!ocx->regs) { + dev_err(&pdev->dev, "Cannot map PCI resources\n"); + ret = -ENODEV; + goto err_free; + } + + ocx->pdev = pdev; + + for (i = 0; i < OCX_INTS; i++) { + ocx->msix_ent[i].entry = i; + ocx->msix_ent[i].vector = 0; + } + + ret = pci_enable_msix_exact(pdev, ocx->msix_ent, OCX_INTS); + if (ret) { + dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret); + goto err_free; + } + + for (i = 0; i < OCX_INTS; i++) { + ret = devm_request_threaded_irq(&pdev->dev, + ocx->msix_ent[i].vector, + (i == 3) ? + thunderx_ocx_com_isr : + thunderx_ocx_lnk_isr, + (i == 3) ? + thunderx_ocx_com_threaded_isr : + thunderx_ocx_lnk_threaded_isr, + 0, "[EDAC] ThunderX OCX", + &ocx->msix_ent[i]); + if (ret) + goto err_free; + } + + edac_dev->dev = &pdev->dev; + edac_dev->dev_name = dev_name(&pdev->dev); + edac_dev->mod_name = "thunderx-ocx"; + edac_dev->ctl_name = "thunderx-ocx"; + + ret = edac_device_add_device(edac_dev); + if (ret) { + dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret); + goto err_free; + } + + if (IS_ENABLED(CONFIG_EDAC_DEBUG)) { + ocx->debugfs = edac_debugfs_create_dir(pdev->dev.kobj.name); + + ret = thunderx_create_debugfs_nodes(ocx->debugfs, + ocx_dfs_ents, + ocx, + ARRAY_SIZE(ocx_dfs_ents)); + if (ret != ARRAY_SIZE(ocx_dfs_ents)) { + dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n", + ret, ret >= 0 ? " created" : ""); + } + } + + pci_set_drvdata(pdev, edac_dev); + + thunderx_ocx_clearstats(ocx); + + for (i = 0; i < OCX_RX_LANES; i++) { + writeq(OCX_LNE_INT_ENA_ALL, + ocx->regs + OCX_LNE_INT_EN(i)); + + reg = readq(ocx->regs + OCX_LNE_INT(i)); + writeq(reg, ocx->regs + OCX_LNE_INT(i)); + + } + + for (i = 0; i < OCX_LINK_INTS; i++) { + reg = readq(ocx->regs + OCX_COM_LINKX_INT(i)); + writeq(reg, ocx->regs + OCX_COM_LINKX_INT(i)); + + writeq(OCX_COM_LINKX_INT_ENA_ALL, + ocx->regs + OCX_COM_LINKX_INT_ENA_W1S(i)); + } + + reg = readq(ocx->regs + OCX_COM_INT); + writeq(reg, ocx->regs + OCX_COM_INT); + + writeq(OCX_COM_INT_ENA_ALL, ocx->regs + OCX_COM_INT_ENA_W1S); + + return 0; +err_free: + edac_device_free_ctl_info(edac_dev); + + return ret; +} + +static void thunderx_ocx_remove(struct pci_dev *pdev) +{ + struct edac_device_ctl_info *edac_dev = pci_get_drvdata(pdev); + struct thunderx_ocx *ocx = edac_dev->pvt_info; + int i; + + writeq(OCX_COM_INT_ENA_ALL, ocx->regs + OCX_COM_INT_ENA_W1C); + + for (i = 0; i < OCX_INTS; i++) { + writeq(OCX_COM_LINKX_INT_ENA_ALL, + ocx->regs + OCX_COM_LINKX_INT_ENA_W1C(i)); + } + + edac_debugfs_remove_recursive(ocx->debugfs); + + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(edac_dev); +} + +MODULE_DEVICE_TABLE(pci, thunderx_ocx_pci_tbl); + +static struct pci_driver thunderx_ocx_driver = { + .name = "thunderx_ocx_edac", + .probe = thunderx_ocx_probe, + .remove = thunderx_ocx_remove, + .id_table = thunderx_ocx_pci_tbl, +}; + +/*---------------------- L2C driver ---------------------------------*/ + +#define PCI_DEVICE_ID_THUNDER_L2C_TAD 0xa02e +#define PCI_DEVICE_ID_THUNDER_L2C_CBC 0xa02f +#define PCI_DEVICE_ID_THUNDER_L2C_MCI 0xa030 + +#define L2C_TAD_INT_W1C 0x40000 +#define L2C_TAD_INT_W1S 0x40008 + +#define L2C_TAD_INT_ENA_W1C 0x40020 +#define L2C_TAD_INT_ENA_W1S 0x40028 + + +#define L2C_TAD_INT_L2DDBE BIT(1) +#define L2C_TAD_INT_SBFSBE BIT(2) +#define L2C_TAD_INT_SBFDBE BIT(3) +#define L2C_TAD_INT_FBFSBE BIT(4) +#define L2C_TAD_INT_FBFDBE BIT(5) +#define L2C_TAD_INT_TAGDBE BIT(9) +#define L2C_TAD_INT_RDDISLMC BIT(15) +#define L2C_TAD_INT_WRDISLMC BIT(16) +#define L2C_TAD_INT_LFBTO BIT(17) +#define L2C_TAD_INT_GSYNCTO BIT(18) +#define L2C_TAD_INT_RTGSBE BIT(32) +#define L2C_TAD_INT_RTGDBE BIT(33) +#define L2C_TAD_INT_RDDISOCI BIT(34) +#define L2C_TAD_INT_WRDISOCI BIT(35) + +#define L2C_TAD_INT_ECC (L2C_TAD_INT_L2DDBE | \ + L2C_TAD_INT_SBFSBE | L2C_TAD_INT_SBFDBE | \ + L2C_TAD_INT_FBFSBE | L2C_TAD_INT_FBFDBE) + +#define L2C_TAD_INT_CE (L2C_TAD_INT_SBFSBE | \ + L2C_TAD_INT_FBFSBE) + +#define L2C_TAD_INT_UE (L2C_TAD_INT_L2DDBE | \ + L2C_TAD_INT_SBFDBE | \ + L2C_TAD_INT_FBFDBE | \ + L2C_TAD_INT_TAGDBE | \ + L2C_TAD_INT_RTGDBE | \ + L2C_TAD_INT_WRDISOCI | \ + L2C_TAD_INT_RDDISOCI | \ + L2C_TAD_INT_WRDISLMC | \ + L2C_TAD_INT_RDDISLMC | \ + L2C_TAD_INT_LFBTO | \ + L2C_TAD_INT_GSYNCTO) + +static const struct error_descr l2_tad_errors[] = { + { + .type = ERR_CORRECTED, + .mask = L2C_TAD_INT_SBFSBE, + .descr = "SBF single-bit error", + }, + { + .type = ERR_CORRECTED, + .mask = L2C_TAD_INT_FBFSBE, + .descr = "FBF single-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_L2DDBE, + .descr = "L2D double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_SBFDBE, + .descr = "SBF double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_FBFDBE, + .descr = "FBF double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_TAGDBE, + .descr = "TAG double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_RTGDBE, + .descr = "RTG double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_WRDISOCI, + .descr = "Write to a disabled CCPI", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_RDDISOCI, + .descr = "Read from a disabled CCPI", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_WRDISLMC, + .descr = "Write to a disabled LMC", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_RDDISLMC, + .descr = "Read from a disabled LMC", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_LFBTO, + .descr = "LFB entry timeout", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_TAD_INT_GSYNCTO, + .descr = "Global sync CCPI timeout", + }, + {0, 0, NULL}, +}; + +#define L2C_TAD_INT_TAG (L2C_TAD_INT_TAGDBE) + +#define L2C_TAD_INT_RTG (L2C_TAD_INT_RTGDBE) + +#define L2C_TAD_INT_DISLMC (L2C_TAD_INT_WRDISLMC | L2C_TAD_INT_RDDISLMC) + +#define L2C_TAD_INT_DISOCI (L2C_TAD_INT_WRDISOCI | L2C_TAD_INT_RDDISOCI) + +#define L2C_TAD_INT_ENA_ALL (L2C_TAD_INT_ECC | L2C_TAD_INT_TAG | \ + L2C_TAD_INT_RTG | \ + L2C_TAD_INT_DISLMC | L2C_TAD_INT_DISOCI | \ + L2C_TAD_INT_LFBTO) + +#define L2C_TAD_TIMETWO 0x50000 +#define L2C_TAD_TIMEOUT 0x50100 +#define L2C_TAD_ERR 0x60000 +#define L2C_TAD_TQD_ERR 0x60100 +#define L2C_TAD_TTG_ERR 0x60200 + + +#define L2C_CBC_INT_W1C 0x60000 + +#define L2C_CBC_INT_RSDSBE BIT(0) +#define L2C_CBC_INT_RSDDBE BIT(1) + +#define L2C_CBC_INT_RSD (L2C_CBC_INT_RSDSBE | L2C_CBC_INT_RSDDBE) + +#define L2C_CBC_INT_MIBSBE BIT(4) +#define L2C_CBC_INT_MIBDBE BIT(5) + +#define L2C_CBC_INT_MIB (L2C_CBC_INT_MIBSBE | L2C_CBC_INT_MIBDBE) + +#define L2C_CBC_INT_IORDDISOCI BIT(6) +#define L2C_CBC_INT_IOWRDISOCI BIT(7) + +#define L2C_CBC_INT_IODISOCI (L2C_CBC_INT_IORDDISOCI | \ + L2C_CBC_INT_IOWRDISOCI) + +#define L2C_CBC_INT_CE (L2C_CBC_INT_RSDSBE | L2C_CBC_INT_MIBSBE) +#define L2C_CBC_INT_UE (L2C_CBC_INT_RSDDBE | L2C_CBC_INT_MIBDBE) + + +static const struct error_descr l2_cbc_errors[] = { + { + .type = ERR_CORRECTED, + .mask = L2C_CBC_INT_RSDSBE, + .descr = "RSD single-bit error", + }, + { + .type = ERR_CORRECTED, + .mask = L2C_CBC_INT_MIBSBE, + .descr = "MIB single-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_CBC_INT_RSDDBE, + .descr = "RSD double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_CBC_INT_MIBDBE, + .descr = "MIB double-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_CBC_INT_IORDDISOCI, + .descr = "Read from a disabled CCPI", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_CBC_INT_IOWRDISOCI, + .descr = "Write to a disabled CCPI", + }, + {0, 0, NULL}, +}; + +#define L2C_CBC_INT_W1S 0x60008 +#define L2C_CBC_INT_ENA_W1C 0x60020 + +#define L2C_CBC_INT_ENA_ALL (L2C_CBC_INT_RSD | L2C_CBC_INT_MIB | \ + L2C_CBC_INT_IODISOCI) + +#define L2C_CBC_INT_ENA_W1S 0x60028 + +#define L2C_CBC_IODISOCIERR 0x80008 +#define L2C_CBC_IOCERR 0x80010 +#define L2C_CBC_RSDERR 0x80018 +#define L2C_CBC_MIBERR 0x80020 + + +#define L2C_MCI_INT_W1C 0x0 + +#define L2C_MCI_INT_VBFSBE BIT(0) +#define L2C_MCI_INT_VBFDBE BIT(1) + +static const struct error_descr l2_mci_errors[] = { + { + .type = ERR_CORRECTED, + .mask = L2C_MCI_INT_VBFSBE, + .descr = "VBF single-bit error", + }, + { + .type = ERR_UNCORRECTED, + .mask = L2C_MCI_INT_VBFDBE, + .descr = "VBF double-bit error", + }, + {0, 0, NULL}, +}; + +#define L2C_MCI_INT_W1S 0x8 +#define L2C_MCI_INT_ENA_W1C 0x20 + +#define L2C_MCI_INT_ENA_ALL (L2C_MCI_INT_VBFSBE | L2C_MCI_INT_VBFDBE) + +#define L2C_MCI_INT_ENA_W1S 0x28 + +#define L2C_MCI_ERR 0x10000 + +#define L2C_MESSAGE_SIZE SZ_1K +#define L2C_OTHER_SIZE (50 * ARRAY_SIZE(l2_tad_errors)) + +struct l2c_err_ctx { + char *reg_ext_name; + u64 reg_int; + u64 reg_ext; +}; + +struct thunderx_l2c { + void __iomem *regs; + struct pci_dev *pdev; + struct edac_device_ctl_info *edac_dev; + + struct dentry *debugfs; + + int index; + + struct msix_entry msix_ent; + + struct l2c_err_ctx err_ctx[RING_ENTRIES]; + unsigned long ring_head; + unsigned long ring_tail; +}; + +static irqreturn_t thunderx_l2c_tad_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_l2c *tad = container_of(msix, struct thunderx_l2c, + msix_ent); + + unsigned long head = ring_pos(tad->ring_head, ARRAY_SIZE(tad->err_ctx)); + struct l2c_err_ctx *ctx = &tad->err_ctx[head]; + + ctx->reg_int = readq(tad->regs + L2C_TAD_INT_W1C); + + if (ctx->reg_int & L2C_TAD_INT_ECC) { + ctx->reg_ext_name = "TQD_ERR"; + ctx->reg_ext = readq(tad->regs + L2C_TAD_TQD_ERR); + } else if (ctx->reg_int & L2C_TAD_INT_TAG) { + ctx->reg_ext_name = "TTG_ERR"; + ctx->reg_ext = readq(tad->regs + L2C_TAD_TTG_ERR); + } else if (ctx->reg_int & L2C_TAD_INT_LFBTO) { + ctx->reg_ext_name = "TIMEOUT"; + ctx->reg_ext = readq(tad->regs + L2C_TAD_TIMEOUT); + } else if (ctx->reg_int & L2C_TAD_INT_DISOCI) { + ctx->reg_ext_name = "ERR"; + ctx->reg_ext = readq(tad->regs + L2C_TAD_ERR); + } + + writeq(ctx->reg_int, tad->regs + L2C_TAD_INT_W1C); + + tad->ring_head++; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_l2c_cbc_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_l2c *cbc = container_of(msix, struct thunderx_l2c, + msix_ent); + + unsigned long head = ring_pos(cbc->ring_head, ARRAY_SIZE(cbc->err_ctx)); + struct l2c_err_ctx *ctx = &cbc->err_ctx[head]; + + ctx->reg_int = readq(cbc->regs + L2C_CBC_INT_W1C); + + if (ctx->reg_int & L2C_CBC_INT_RSD) { + ctx->reg_ext_name = "RSDERR"; + ctx->reg_ext = readq(cbc->regs + L2C_CBC_RSDERR); + } else if (ctx->reg_int & L2C_CBC_INT_MIB) { + ctx->reg_ext_name = "MIBERR"; + ctx->reg_ext = readq(cbc->regs + L2C_CBC_MIBERR); + } else if (ctx->reg_int & L2C_CBC_INT_IODISOCI) { + ctx->reg_ext_name = "IODISOCIERR"; + ctx->reg_ext = readq(cbc->regs + L2C_CBC_IODISOCIERR); + } + + writeq(ctx->reg_int, cbc->regs + L2C_CBC_INT_W1C); + + cbc->ring_head++; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_l2c_mci_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_l2c *mci = container_of(msix, struct thunderx_l2c, + msix_ent); + + unsigned long head = ring_pos(mci->ring_head, ARRAY_SIZE(mci->err_ctx)); + struct l2c_err_ctx *ctx = &mci->err_ctx[head]; + + ctx->reg_int = readq(mci->regs + L2C_MCI_INT_W1C); + ctx->reg_ext = readq(mci->regs + L2C_MCI_ERR); + + writeq(ctx->reg_int, mci->regs + L2C_MCI_INT_W1C); + + ctx->reg_ext_name = "ERR"; + + mci->ring_head++; + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id) +{ + struct msix_entry *msix = irq_id; + struct thunderx_l2c *l2c = container_of(msix, struct thunderx_l2c, + msix_ent); + + unsigned long tail = ring_pos(l2c->ring_tail, ARRAY_SIZE(l2c->err_ctx)); + struct l2c_err_ctx *ctx = &l2c->err_ctx[tail]; + irqreturn_t ret = IRQ_NONE; + + u64 mask_ue, mask_ce; + const struct error_descr *l2_errors; + char *reg_int_name; + + char *msg; + char *other; + + msg = kmalloc(OCX_MESSAGE_SIZE, GFP_KERNEL); + other = kmalloc(OCX_OTHER_SIZE, GFP_KERNEL); + + if (!msg || !other) + goto err_free; + + switch (l2c->pdev->device) { + case PCI_DEVICE_ID_THUNDER_L2C_TAD: + reg_int_name = "L2C_TAD_INT"; + mask_ue = L2C_TAD_INT_UE; + mask_ce = L2C_TAD_INT_CE; + l2_errors = l2_tad_errors; + break; + case PCI_DEVICE_ID_THUNDER_L2C_CBC: + reg_int_name = "L2C_CBC_INT"; + mask_ue = L2C_CBC_INT_UE; + mask_ce = L2C_CBC_INT_CE; + l2_errors = l2_cbc_errors; + break; + case PCI_DEVICE_ID_THUNDER_L2C_MCI: + reg_int_name = "L2C_MCI_INT"; + mask_ue = L2C_MCI_INT_VBFDBE; + mask_ce = L2C_MCI_INT_VBFSBE; + l2_errors = l2_mci_errors; + break; + default: + dev_err(&l2c->pdev->dev, "Unsupported device: %04x\n", + l2c->pdev->device); + goto err_free; + } + + while (CIRC_CNT(l2c->ring_head, l2c->ring_tail, + ARRAY_SIZE(l2c->err_ctx))) { + snprintf(msg, L2C_MESSAGE_SIZE, + "%s: %s: %016llx, %s: %016llx", + l2c->edac_dev->ctl_name, reg_int_name, ctx->reg_int, + ctx->reg_ext_name, ctx->reg_ext); + + decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int); + + strlcat(msg, other, L2C_MESSAGE_SIZE); + + if (ctx->reg_int & mask_ue) + edac_device_handle_ue(l2c->edac_dev, 0, 0, msg); + else if (ctx->reg_int & mask_ce) + edac_device_handle_ce(l2c->edac_dev, 0, 0, msg); + + l2c->ring_tail++; + } + + ret = IRQ_HANDLED; + +err_free: + kfree(other); + kfree(msg); + + return ret; +} + +#define L2C_DEBUGFS_ATTR(_name, _reg) DEBUGFS_REG_ATTR(l2c, _name, _reg) + +L2C_DEBUGFS_ATTR(tad_int, L2C_TAD_INT_W1S); + +static struct debugfs_entry *l2c_tad_dfs_ents[] = { + &debugfs_tad_int, +}; + +L2C_DEBUGFS_ATTR(cbc_int, L2C_CBC_INT_W1S); + +static struct debugfs_entry *l2c_cbc_dfs_ents[] = { + &debugfs_cbc_int, +}; + +L2C_DEBUGFS_ATTR(mci_int, L2C_MCI_INT_W1S); + +static struct debugfs_entry *l2c_mci_dfs_ents[] = { + &debugfs_mci_int, +}; + +static const struct pci_device_id thunderx_l2c_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_TAD), }, + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_CBC), }, + { PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVICE_ID_THUNDER_L2C_MCI), }, + { 0, }, +}; + +static int thunderx_l2c_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct thunderx_l2c *l2c; + struct edac_device_ctl_info *edac_dev; + struct debugfs_entry **l2c_devattr; + size_t dfs_entries; + irqreturn_t (*thunderx_l2c_isr)(int, void *) = NULL; + char name[32]; + const char *fmt; + u64 reg_en_offs, reg_en_mask; + int idx; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "Cannot enable PCI device: %d\n", ret); + return ret; + } + + ret = pcim_iomap_regions(pdev, BIT(0), "thunderx_l2c"); + if (ret) { + dev_err(&pdev->dev, "Cannot map PCI resources: %d\n", ret); + return ret; + } + + switch (pdev->device) { + case PCI_DEVICE_ID_THUNDER_L2C_TAD: + thunderx_l2c_isr = thunderx_l2c_tad_isr; + l2c_devattr = l2c_tad_dfs_ents; + dfs_entries = ARRAY_SIZE(l2c_tad_dfs_ents); + fmt = "L2C-TAD%d"; + reg_en_offs = L2C_TAD_INT_ENA_W1S; + reg_en_mask = L2C_TAD_INT_ENA_ALL; + break; + case PCI_DEVICE_ID_THUNDER_L2C_CBC: + thunderx_l2c_isr = thunderx_l2c_cbc_isr; + l2c_devattr = l2c_cbc_dfs_ents; + dfs_entries = ARRAY_SIZE(l2c_cbc_dfs_ents); + fmt = "L2C-CBC%d"; + reg_en_offs = L2C_CBC_INT_ENA_W1S; + reg_en_mask = L2C_CBC_INT_ENA_ALL; + break; + case PCI_DEVICE_ID_THUNDER_L2C_MCI: + thunderx_l2c_isr = thunderx_l2c_mci_isr; + l2c_devattr = l2c_mci_dfs_ents; + dfs_entries = ARRAY_SIZE(l2c_mci_dfs_ents); + fmt = "L2C-MCI%d"; + reg_en_offs = L2C_MCI_INT_ENA_W1S; + reg_en_mask = L2C_MCI_INT_ENA_ALL; + break; + default: + //Should never ever get here + dev_err(&pdev->dev, "Unsupported PCI device: %04x\n", + pdev->device); + return -EINVAL; + } + + idx = edac_device_alloc_index(); + snprintf(name, sizeof(name), fmt, idx); + + edac_dev = edac_device_alloc_ctl_info(sizeof(struct thunderx_l2c), + name, 1, "L2C", 1, 0, + NULL, 0, idx); + if (!edac_dev) { + dev_err(&pdev->dev, "Cannot allocate EDAC device\n"); + return -ENOMEM; + } + + l2c = edac_dev->pvt_info; + l2c->edac_dev = edac_dev; + + l2c->regs = pcim_iomap_table(pdev)[0]; + if (!l2c->regs) { + dev_err(&pdev->dev, "Cannot map PCI resources\n"); + ret = -ENODEV; + goto err_free; + } + + l2c->pdev = pdev; + + l2c->ring_head = 0; + l2c->ring_tail = 0; + + l2c->msix_ent.entry = 0; + l2c->msix_ent.vector = 0; + + ret = pci_enable_msix_exact(pdev, &l2c->msix_ent, 1); + if (ret) { + dev_err(&pdev->dev, "Cannot enable interrupt: %d\n", ret); + goto err_free; + } + + ret = devm_request_threaded_irq(&pdev->dev, l2c->msix_ent.vector, + thunderx_l2c_isr, + thunderx_l2c_threaded_isr, + 0, "[EDAC] ThunderX L2C", + &l2c->msix_ent); + if (ret) + goto err_free; + + edac_dev->dev = &pdev->dev; + edac_dev->dev_name = dev_name(&pdev->dev); + edac_dev->mod_name = "thunderx-l2c"; + edac_dev->ctl_name = "thunderx-l2c"; + + ret = edac_device_add_device(edac_dev); + if (ret) { + dev_err(&pdev->dev, "Cannot add EDAC device: %d\n", ret); + goto err_free; + } + + if (IS_ENABLED(CONFIG_EDAC_DEBUG)) { + l2c->debugfs = edac_debugfs_create_dir(pdev->dev.kobj.name); + + ret = thunderx_create_debugfs_nodes(l2c->debugfs, l2c_devattr, + l2c, dfs_entries); + + if (ret != dfs_entries) { + dev_warn(&pdev->dev, "Error creating debugfs entries: %d%s\n", + ret, ret >= 0 ? " created" : ""); + } + } + + pci_set_drvdata(pdev, edac_dev); + + writeq(reg_en_mask, l2c->regs + reg_en_offs); + + return 0; + +err_free: + edac_device_free_ctl_info(edac_dev); + + return ret; +} + +static void thunderx_l2c_remove(struct pci_dev *pdev) +{ + struct edac_device_ctl_info *edac_dev = pci_get_drvdata(pdev); + struct thunderx_l2c *l2c = edac_dev->pvt_info; + + switch (pdev->device) { + case PCI_DEVICE_ID_THUNDER_L2C_TAD: + writeq(L2C_TAD_INT_ENA_ALL, l2c->regs + L2C_TAD_INT_ENA_W1C); + break; + case PCI_DEVICE_ID_THUNDER_L2C_CBC: + writeq(L2C_CBC_INT_ENA_ALL, l2c->regs + L2C_CBC_INT_ENA_W1C); + break; + case PCI_DEVICE_ID_THUNDER_L2C_MCI: + writeq(L2C_MCI_INT_ENA_ALL, l2c->regs + L2C_MCI_INT_ENA_W1C); + break; + } + + edac_debugfs_remove_recursive(l2c->debugfs); + + edac_device_del_device(&pdev->dev); + edac_device_free_ctl_info(edac_dev); +} + +MODULE_DEVICE_TABLE(pci, thunderx_l2c_pci_tbl); + +static struct pci_driver thunderx_l2c_driver = { + .name = "thunderx_l2c_edac", + .probe = thunderx_l2c_probe, + .remove = thunderx_l2c_remove, + .id_table = thunderx_l2c_pci_tbl, +}; + +static int __init thunderx_edac_init(void) +{ + int rc = 0; + + rc = pci_register_driver(&thunderx_lmc_driver); + if (rc) + return rc; + + rc = pci_register_driver(&thunderx_ocx_driver); + if (rc) + goto err_lmc; + + rc = pci_register_driver(&thunderx_l2c_driver); + if (rc) + goto err_ocx; + + return rc; +err_ocx: + pci_unregister_driver(&thunderx_ocx_driver); +err_lmc: + pci_unregister_driver(&thunderx_lmc_driver); + + return rc; +} + +static void __exit thunderx_edac_exit(void) +{ + pci_unregister_driver(&thunderx_l2c_driver); + pci_unregister_driver(&thunderx_ocx_driver); + pci_unregister_driver(&thunderx_lmc_driver); + +} + +module_init(thunderx_edac_init); +module_exit(thunderx_edac_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Cavium, Inc."); +MODULE_DESCRIPTION("EDAC Driver for Cavium ThunderX"); diff --git a/drivers/edac/ti_edac.c b/drivers/edac/ti_edac.c new file mode 100644 index 000000000..6971ded59 --- /dev/null +++ b/drivers/edac/ti_edac.c @@ -0,0 +1,338 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/ + * + * Texas Instruments DDR3 ECC error correction and detection driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/edac.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/module.h> + +#include "edac_module.h" + +/* EMIF controller registers */ +#define EMIF_SDRAM_CONFIG 0x008 +#define EMIF_IRQ_STATUS 0x0ac +#define EMIF_IRQ_ENABLE_SET 0x0b4 +#define EMIF_ECC_CTRL 0x110 +#define EMIF_1B_ECC_ERR_CNT 0x130 +#define EMIF_1B_ECC_ERR_THRSH 0x134 +#define EMIF_1B_ECC_ERR_ADDR_LOG 0x13c +#define EMIF_2B_ECC_ERR_ADDR_LOG 0x140 + +/* Bit definitions for EMIF_SDRAM_CONFIG */ +#define SDRAM_TYPE_SHIFT 29 +#define SDRAM_TYPE_MASK GENMASK(31, 29) +#define SDRAM_TYPE_DDR3 (3 << SDRAM_TYPE_SHIFT) +#define SDRAM_TYPE_DDR2 (2 << SDRAM_TYPE_SHIFT) +#define SDRAM_NARROW_MODE_MASK GENMASK(15, 14) +#define SDRAM_K2_NARROW_MODE_SHIFT 12 +#define SDRAM_K2_NARROW_MODE_MASK GENMASK(13, 12) +#define SDRAM_ROWSIZE_SHIFT 7 +#define SDRAM_ROWSIZE_MASK GENMASK(9, 7) +#define SDRAM_IBANK_SHIFT 4 +#define SDRAM_IBANK_MASK GENMASK(6, 4) +#define SDRAM_K2_IBANK_SHIFT 5 +#define SDRAM_K2_IBANK_MASK GENMASK(6, 5) +#define SDRAM_K2_EBANK_SHIFT 3 +#define SDRAM_K2_EBANK_MASK BIT(SDRAM_K2_EBANK_SHIFT) +#define SDRAM_PAGESIZE_SHIFT 0 +#define SDRAM_PAGESIZE_MASK GENMASK(2, 0) +#define SDRAM_K2_PAGESIZE_SHIFT 0 +#define SDRAM_K2_PAGESIZE_MASK GENMASK(1, 0) + +#define EMIF_1B_ECC_ERR_THRSH_SHIFT 24 + +/* IRQ bit definitions */ +#define EMIF_1B_ECC_ERR BIT(5) +#define EMIF_2B_ECC_ERR BIT(4) +#define EMIF_WR_ECC_ERR BIT(3) +#define EMIF_SYS_ERR BIT(0) +/* Bit 31 enables ECC and 28 enables RMW */ +#define ECC_ENABLED (BIT(31) | BIT(28)) + +#define EDAC_MOD_NAME "ti-emif-edac" + +enum { + EMIF_TYPE_DRA7, + EMIF_TYPE_K2 +}; + +struct ti_edac { + void __iomem *reg; +}; + +static u32 ti_edac_readl(struct ti_edac *edac, u16 offset) +{ + return readl_relaxed(edac->reg + offset); +} + +static void ti_edac_writel(struct ti_edac *edac, u32 val, u16 offset) +{ + writel_relaxed(val, edac->reg + offset); +} + +static irqreturn_t ti_edac_isr(int irq, void *data) +{ + struct mem_ctl_info *mci = data; + struct ti_edac *edac = mci->pvt_info; + u32 irq_status; + u32 err_addr; + int err_count; + + irq_status = ti_edac_readl(edac, EMIF_IRQ_STATUS); + + if (irq_status & EMIF_1B_ECC_ERR) { + err_addr = ti_edac_readl(edac, EMIF_1B_ECC_ERR_ADDR_LOG); + err_count = ti_edac_readl(edac, EMIF_1B_ECC_ERR_CNT); + ti_edac_writel(edac, err_count, EMIF_1B_ECC_ERR_CNT); + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, -1, 0, 0, 0, + mci->ctl_name, "1B"); + } + + if (irq_status & EMIF_2B_ECC_ERR) { + err_addr = ti_edac_readl(edac, EMIF_2B_ECC_ERR_ADDR_LOG); + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + err_addr >> PAGE_SHIFT, + err_addr & ~PAGE_MASK, -1, 0, 0, 0, + mci->ctl_name, "2B"); + } + + if (irq_status & EMIF_WR_ECC_ERR) + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + 0, 0, -1, 0, 0, 0, + mci->ctl_name, "WR"); + + ti_edac_writel(edac, irq_status, EMIF_IRQ_STATUS); + + return IRQ_HANDLED; +} + +static void ti_edac_setup_dimm(struct mem_ctl_info *mci, u32 type) +{ + struct dimm_info *dimm; + struct ti_edac *edac = mci->pvt_info; + int bits; + u32 val; + u32 memsize; + + dimm = edac_get_dimm(mci, 0, 0, 0); + + val = ti_edac_readl(edac, EMIF_SDRAM_CONFIG); + + if (type == EMIF_TYPE_DRA7) { + bits = ((val & SDRAM_PAGESIZE_MASK) >> SDRAM_PAGESIZE_SHIFT) + 8; + bits += ((val & SDRAM_ROWSIZE_MASK) >> SDRAM_ROWSIZE_SHIFT) + 9; + bits += (val & SDRAM_IBANK_MASK) >> SDRAM_IBANK_SHIFT; + + if (val & SDRAM_NARROW_MODE_MASK) { + bits++; + dimm->dtype = DEV_X16; + } else { + bits += 2; + dimm->dtype = DEV_X32; + } + } else { + bits = 16; + bits += ((val & SDRAM_K2_PAGESIZE_MASK) >> + SDRAM_K2_PAGESIZE_SHIFT) + 8; + bits += (val & SDRAM_K2_IBANK_MASK) >> SDRAM_K2_IBANK_SHIFT; + bits += (val & SDRAM_K2_EBANK_MASK) >> SDRAM_K2_EBANK_SHIFT; + + val = (val & SDRAM_K2_NARROW_MODE_MASK) >> + SDRAM_K2_NARROW_MODE_SHIFT; + switch (val) { + case 0: + bits += 3; + dimm->dtype = DEV_X64; + break; + case 1: + bits += 2; + dimm->dtype = DEV_X32; + break; + case 2: + bits++; + dimm->dtype = DEV_X16; + break; + } + } + + memsize = 1 << bits; + + dimm->nr_pages = memsize >> PAGE_SHIFT; + dimm->grain = 4; + if ((val & SDRAM_TYPE_MASK) == SDRAM_TYPE_DDR2) + dimm->mtype = MEM_DDR2; + else + dimm->mtype = MEM_DDR3; + + val = ti_edac_readl(edac, EMIF_ECC_CTRL); + if (val & ECC_ENABLED) + dimm->edac_mode = EDAC_SECDED; + else + dimm->edac_mode = EDAC_NONE; +} + +static const struct of_device_id ti_edac_of_match[] = { + { .compatible = "ti,emif-keystone", .data = (void *)EMIF_TYPE_K2 }, + { .compatible = "ti,emif-dra7xx", .data = (void *)EMIF_TYPE_DRA7 }, + {}, +}; +MODULE_DEVICE_TABLE(of, ti_edac_of_match); + +static int _emif_get_id(struct device_node *node) +{ + struct device_node *np; + const __be32 *addrp; + u32 addr, my_addr; + int my_id = 0; + + addrp = of_get_address(node, 0, NULL, NULL); + my_addr = (u32)of_translate_address(node, addrp); + + for_each_matching_node(np, ti_edac_of_match) { + if (np == node) + continue; + + addrp = of_get_address(np, 0, NULL, NULL); + addr = (u32)of_translate_address(np, addrp); + + edac_printk(KERN_INFO, EDAC_MOD_NAME, + "addr=%x, my_addr=%x\n", + addr, my_addr); + + if (addr < my_addr) + my_id++; + } + + return my_id; +} + +static int ti_edac_probe(struct platform_device *pdev) +{ + int error_irq = 0, ret = -ENODEV; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *reg; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[1]; + const struct of_device_id *id; + struct ti_edac *edac; + int emif_id; + + id = of_match_device(ti_edac_of_match, &pdev->dev); + if (!id) + return -ENODEV; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg = devm_ioremap_resource(dev, res); + if (IS_ERR(reg)) + return PTR_ERR(reg); + + layers[0].type = EDAC_MC_LAYER_ALL_MEM; + layers[0].size = 1; + + /* Allocate ID number for our EMIF controller */ + emif_id = _emif_get_id(pdev->dev.of_node); + if (emif_id < 0) + return -EINVAL; + + mci = edac_mc_alloc(emif_id, 1, layers, sizeof(*edac)); + if (!mci) + return -ENOMEM; + + mci->pdev = &pdev->dev; + edac = mci->pvt_info; + edac->reg = reg; + platform_set_drvdata(pdev, mci); + + mci->mtype_cap = MEM_FLAG_DDR3 | MEM_FLAG_DDR2; + mci->edac_ctl_cap = EDAC_FLAG_SECDED | EDAC_FLAG_NONE; + mci->mod_name = EDAC_MOD_NAME; + mci->ctl_name = id->compatible; + mci->dev_name = dev_name(&pdev->dev); + + /* Setup memory layout */ + ti_edac_setup_dimm(mci, (u32)(id->data)); + + /* add EMIF ECC error handler */ + error_irq = platform_get_irq(pdev, 0); + if (error_irq < 0) { + ret = error_irq; + goto err; + } + + ret = devm_request_irq(dev, error_irq, ti_edac_isr, 0, + "emif-edac-irq", mci); + if (ret) { + edac_printk(KERN_ERR, EDAC_MOD_NAME, + "request_irq fail for EMIF EDAC irq\n"); + goto err; + } + + ret = edac_mc_add_mc(mci); + if (ret) { + edac_printk(KERN_ERR, EDAC_MOD_NAME, + "Failed to register mci: %d.\n", ret); + goto err; + } + + /* Generate an interrupt with each 1b error */ + ti_edac_writel(edac, 1 << EMIF_1B_ECC_ERR_THRSH_SHIFT, + EMIF_1B_ECC_ERR_THRSH); + + /* Enable interrupts */ + ti_edac_writel(edac, + EMIF_1B_ECC_ERR | EMIF_2B_ECC_ERR | EMIF_WR_ECC_ERR, + EMIF_IRQ_ENABLE_SET); + + return 0; + +err: + edac_mc_free(mci); + return ret; +} + +static int ti_edac_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = platform_get_drvdata(pdev); + + edac_mc_del_mc(&pdev->dev); + edac_mc_free(mci); + + return 0; +} + +static struct platform_driver ti_edac_driver = { + .probe = ti_edac_probe, + .remove = ti_edac_remove, + .driver = { + .name = EDAC_MOD_NAME, + .of_match_table = ti_edac_of_match, + }, +}; + +module_platform_driver(ti_edac_driver); + +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("EDAC Driver for Texas Instruments DDR3 MC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/edac/wq.c b/drivers/edac/wq.c new file mode 100644 index 000000000..ad3f51662 --- /dev/null +++ b/drivers/edac/wq.c @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "edac_module.h" + +static struct workqueue_struct *wq; + +bool edac_queue_work(struct delayed_work *work, unsigned long delay) +{ + return queue_delayed_work(wq, work, delay); +} +EXPORT_SYMBOL_GPL(edac_queue_work); + +bool edac_mod_work(struct delayed_work *work, unsigned long delay) +{ + return mod_delayed_work(wq, work, delay); +} +EXPORT_SYMBOL_GPL(edac_mod_work); + +bool edac_stop_work(struct delayed_work *work) +{ + bool ret; + + ret = cancel_delayed_work_sync(work); + flush_workqueue(wq); + + return ret; +} +EXPORT_SYMBOL_GPL(edac_stop_work); + +int edac_workqueue_setup(void) +{ + wq = alloc_ordered_workqueue("edac-poller", WQ_MEM_RECLAIM); + if (!wq) + return -ENODEV; + else + return 0; +} + +void edac_workqueue_teardown(void) +{ + destroy_workqueue(wq); + wq = NULL; +} diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c new file mode 100644 index 000000000..49ab5721a --- /dev/null +++ b/drivers/edac/x38_edac.c @@ -0,0 +1,523 @@ +/* + * Intel X38 Memory Controller kernel module + * Copyright (C) 2008 Cluster Computing, Inc. + * + * This file may be distributed under the terms of the + * GNU General Public License. + * + * This file is based on i3200_edac.c + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/pci_ids.h> +#include <linux/edac.h> + +#include <linux/io-64-nonatomic-lo-hi.h> +#include "edac_module.h" + +#define EDAC_MOD_STR "x38_edac" + +#define PCI_DEVICE_ID_INTEL_X38_HB 0x29e0 + +#define X38_RANKS 8 +#define X38_RANKS_PER_CHANNEL 4 +#define X38_CHANNELS 2 + +/* Intel X38 register addresses - device 0 function 0 - DRAM Controller */ + +#define X38_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */ +#define X38_MCHBAR_HIGH 0x4c +#define X38_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */ +#define X38_MMR_WINDOW_SIZE 16384 + +#define X38_TOM 0xa0 /* Top of Memory (16b) + * + * 15:10 reserved + * 9:0 total populated physical memory + */ +#define X38_TOM_MASK 0x3ff /* bits 9:0 */ +#define X38_TOM_SHIFT 26 /* 64MiB grain */ + +#define X38_ERRSTS 0xc8 /* Error Status Register (16b) + * + * 15 reserved + * 14 Isochronous TBWRR Run Behind FIFO Full + * (ITCV) + * 13 Isochronous TBWRR Run Behind FIFO Put + * (ITSTV) + * 12 reserved + * 11 MCH Thermal Sensor Event + * for SMI/SCI/SERR (GTSE) + * 10 reserved + * 9 LOCK to non-DRAM Memory Flag (LCKF) + * 8 reserved + * 7 DRAM Throttle Flag (DTF) + * 6:2 reserved + * 1 Multi-bit DRAM ECC Error Flag (DMERR) + * 0 Single-bit DRAM ECC Error Flag (DSERR) + */ +#define X38_ERRSTS_UE 0x0002 +#define X38_ERRSTS_CE 0x0001 +#define X38_ERRSTS_BITS (X38_ERRSTS_UE | X38_ERRSTS_CE) + + +/* Intel MMIO register space - device 0 function 0 - MMR space */ + +#define X38_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4) + * + * 15:10 reserved + * 9:0 Channel 0 DRAM Rank Boundary Address + */ +#define X38_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */ +#define X38_DRB_MASK 0x3ff /* bits 9:0 */ +#define X38_DRB_SHIFT 26 /* 64MiB grain */ + +#define X38_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b) + * + * 63:48 Error Column Address (ERRCOL) + * 47:32 Error Row Address (ERRROW) + * 31:29 Error Bank Address (ERRBANK) + * 28:27 Error Rank Address (ERRRANK) + * 26:24 reserved + * 23:16 Error Syndrome (ERRSYND) + * 15: 2 reserved + * 1 Multiple Bit Error Status (MERRSTS) + * 0 Correctable Error Status (CERRSTS) + */ +#define X38_C1ECCERRLOG 0x680 /* Channel 1 ECC Error Log (64b) */ +#define X38_ECCERRLOG_CE 0x1 +#define X38_ECCERRLOG_UE 0x2 +#define X38_ECCERRLOG_RANK_BITS 0x18000000 +#define X38_ECCERRLOG_SYNDROME_BITS 0xff0000 + +#define X38_CAPID0 0xe0 /* see P.94 of spec for details */ + +static int x38_channel_num; + +static int how_many_channel(struct pci_dev *pdev) +{ + unsigned char capid0_8b; /* 8th byte of CAPID0 */ + + pci_read_config_byte(pdev, X38_CAPID0 + 8, &capid0_8b); + if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */ + edac_dbg(0, "In single channel mode\n"); + x38_channel_num = 1; + } else { + edac_dbg(0, "In dual channel mode\n"); + x38_channel_num = 2; + } + + return x38_channel_num; +} + +static unsigned long eccerrlog_syndrome(u64 log) +{ + return (log & X38_ECCERRLOG_SYNDROME_BITS) >> 16; +} + +static int eccerrlog_row(int channel, u64 log) +{ + return ((log & X38_ECCERRLOG_RANK_BITS) >> 27) | + (channel * X38_RANKS_PER_CHANNEL); +} + +enum x38_chips { + X38 = 0, +}; + +struct x38_dev_info { + const char *ctl_name; +}; + +struct x38_error_info { + u16 errsts; + u16 errsts2; + u64 eccerrlog[X38_CHANNELS]; +}; + +static const struct x38_dev_info x38_devs[] = { + [X38] = { + .ctl_name = "x38"}, +}; + +static struct pci_dev *mci_pdev; +static int x38_registered = 1; + + +static void x38_clear_error_info(struct mem_ctl_info *mci) +{ + struct pci_dev *pdev; + + pdev = to_pci_dev(mci->pdev); + + /* + * Clear any error bits. + * (Yes, we really clear bits by writing 1 to them.) + */ + pci_write_bits16(pdev, X38_ERRSTS, X38_ERRSTS_BITS, + X38_ERRSTS_BITS); +} + +static void x38_get_and_clear_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + struct pci_dev *pdev; + void __iomem *window = mci->pvt_info; + + pdev = to_pci_dev(mci->pdev); + + /* + * This is a mess because there is no atomic way to read all the + * registers at once and the registers can transition from CE being + * overwritten by UE. + */ + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts); + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + info->eccerrlog[0] = lo_hi_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = lo_hi_readq(window + X38_C1ECCERRLOG); + + pci_read_config_word(pdev, X38_ERRSTS, &info->errsts2); + + /* + * If the error is the same for both reads then the first set + * of reads is valid. If there is a change then there is a CE + * with no info and the second set of reads is valid and + * should be UE info. + */ + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + info->eccerrlog[0] = lo_hi_readq(window + X38_C0ECCERRLOG); + if (x38_channel_num == 2) + info->eccerrlog[1] = + lo_hi_readq(window + X38_C1ECCERRLOG); + } + + x38_clear_error_info(mci); +} + +static void x38_process_error_info(struct mem_ctl_info *mci, + struct x38_error_info *info) +{ + int channel; + u64 log; + + if (!(info->errsts & X38_ERRSTS_BITS)) + return; + + if ((info->errsts ^ info->errsts2) & X38_ERRSTS_BITS) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, + -1, -1, -1, + "UE overwrote CE", ""); + info->errsts = info->errsts2; + } + + for (channel = 0; channel < x38_channel_num; channel++) { + log = info->eccerrlog[channel]; + if (log & X38_ECCERRLOG_UE) { + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, + 0, 0, 0, + eccerrlog_row(channel, log), + -1, -1, + "x38 UE", ""); + } else if (log & X38_ECCERRLOG_CE) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, + 0, 0, eccerrlog_syndrome(log), + eccerrlog_row(channel, log), + -1, -1, + "x38 CE", ""); + } + } +} + +static void x38_check(struct mem_ctl_info *mci) +{ + struct x38_error_info info; + + x38_get_and_clear_error_info(mci, &info); + x38_process_error_info(mci, &info); +} + +static void __iomem *x38_map_mchbar(struct pci_dev *pdev) +{ + union { + u64 mchbar; + struct { + u32 mchbar_low; + u32 mchbar_high; + }; + } u; + void __iomem *window; + + pci_read_config_dword(pdev, X38_MCHBAR_LOW, &u.mchbar_low); + pci_write_config_dword(pdev, X38_MCHBAR_LOW, u.mchbar_low | 0x1); + pci_read_config_dword(pdev, X38_MCHBAR_HIGH, &u.mchbar_high); + u.mchbar &= X38_MCHBAR_MASK; + + if (u.mchbar != (resource_size_t)u.mchbar) { + printk(KERN_ERR + "x38: mmio space beyond accessible range (0x%llx)\n", + (unsigned long long)u.mchbar); + return NULL; + } + + window = ioremap(u.mchbar, X38_MMR_WINDOW_SIZE); + if (!window) + printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n", + (unsigned long long)u.mchbar); + + return window; +} + + +static void x38_get_drbs(void __iomem *window, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + int i; + + for (i = 0; i < X38_RANKS_PER_CHANNEL; i++) { + drbs[0][i] = readw(window + X38_C0DRB + 2*i) & X38_DRB_MASK; + drbs[1][i] = readw(window + X38_C1DRB + 2*i) & X38_DRB_MASK; + } +} + +static bool x38_is_stacked(struct pci_dev *pdev, + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]) +{ + u16 tom; + + pci_read_config_word(pdev, X38_TOM, &tom); + tom &= X38_TOM_MASK; + + return drbs[X38_CHANNELS - 1][X38_RANKS_PER_CHANNEL - 1] == tom; +} + +static unsigned long drb_to_nr_pages( + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL], + bool stacked, int channel, int rank) +{ + int n; + + n = drbs[channel][rank]; + if (rank > 0) + n -= drbs[channel][rank - 1]; + if (stacked && (channel == 1) && drbs[channel][rank] == + drbs[channel][X38_RANKS_PER_CHANNEL - 1]) { + n -= drbs[0][X38_RANKS_PER_CHANNEL - 1]; + } + + n <<= (X38_DRB_SHIFT - PAGE_SHIFT); + return n; +} + +static int x38_probe1(struct pci_dev *pdev, int dev_idx) +{ + int rc; + int i, j; + struct mem_ctl_info *mci = NULL; + struct edac_mc_layer layers[2]; + u16 drbs[X38_CHANNELS][X38_RANKS_PER_CHANNEL]; + bool stacked; + void __iomem *window; + + edac_dbg(0, "MC:\n"); + + window = x38_map_mchbar(pdev); + if (!window) + return -ENODEV; + + x38_get_drbs(window, drbs); + + how_many_channel(pdev); + + /* FIXME: unconventional pvt_info usage */ + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = X38_RANKS; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = x38_channel_num; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0); + if (!mci) + return -ENOMEM; + + edac_dbg(3, "MC: init mci\n"); + + mci->pdev = &pdev->dev; + mci->mtype_cap = MEM_FLAG_DDR2; + + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + + mci->mod_name = EDAC_MOD_STR; + mci->ctl_name = x38_devs[dev_idx].ctl_name; + mci->dev_name = pci_name(pdev); + mci->edac_check = x38_check; + mci->ctl_page_to_phys = NULL; + mci->pvt_info = window; + + stacked = x38_is_stacked(pdev, drbs); + + /* + * The dram rank boundary (DRB) reg values are boundary addresses + * for each DRAM rank with a granularity of 64MB. DRB regs are + * cumulative; the last one will contain the total memory + * contained in all ranks. + */ + for (i = 0; i < mci->nr_csrows; i++) { + unsigned long nr_pages; + struct csrow_info *csrow = mci->csrows[i]; + + nr_pages = drb_to_nr_pages(drbs, stacked, + i / X38_RANKS_PER_CHANNEL, + i % X38_RANKS_PER_CHANNEL); + + if (nr_pages == 0) + continue; + + for (j = 0; j < x38_channel_num; j++) { + struct dimm_info *dimm = csrow->channels[j]->dimm; + + dimm->nr_pages = nr_pages / x38_channel_num; + dimm->grain = nr_pages << PAGE_SHIFT; + dimm->mtype = MEM_DDR2; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_UNKNOWN; + } + } + + x38_clear_error_info(mci); + + rc = -ENODEV; + if (edac_mc_add_mc(mci)) { + edac_dbg(3, "MC: failed edac_mc_add_mc()\n"); + goto fail; + } + + /* get this far and it's successful */ + edac_dbg(3, "MC: success\n"); + return 0; + +fail: + iounmap(window); + if (mci) + edac_mc_free(mci); + + return rc; +} + +static int x38_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + int rc; + + edac_dbg(0, "MC:\n"); + + if (pci_enable_device(pdev) < 0) + return -EIO; + + rc = x38_probe1(pdev, ent->driver_data); + if (!mci_pdev) + mci_pdev = pci_dev_get(pdev); + + return rc; +} + +static void x38_remove_one(struct pci_dev *pdev) +{ + struct mem_ctl_info *mci; + + edac_dbg(0, "\n"); + + mci = edac_mc_del_mc(&pdev->dev); + if (!mci) + return; + + iounmap(mci->pvt_info); + + edac_mc_free(mci); +} + +static const struct pci_device_id x38_pci_tbl[] = { + { + PCI_VEND_DEV(INTEL, X38_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0, + X38}, + { + 0, + } /* 0 terminated list. */ +}; + +MODULE_DEVICE_TABLE(pci, x38_pci_tbl); + +static struct pci_driver x38_driver = { + .name = EDAC_MOD_STR, + .probe = x38_init_one, + .remove = x38_remove_one, + .id_table = x38_pci_tbl, +}; + +static int __init x38_init(void) +{ + int pci_rc; + + edac_dbg(3, "MC:\n"); + + /* Ensure that the OPSTATE is set correctly for POLL or NMI */ + opstate_init(); + + pci_rc = pci_register_driver(&x38_driver); + if (pci_rc < 0) + goto fail0; + + if (!mci_pdev) { + x38_registered = 0; + mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_X38_HB, NULL); + if (!mci_pdev) { + edac_dbg(0, "x38 pci_get_device fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + + pci_rc = x38_init_one(mci_pdev, x38_pci_tbl); + if (pci_rc < 0) { + edac_dbg(0, "x38 init fail\n"); + pci_rc = -ENODEV; + goto fail1; + } + } + + return 0; + +fail1: + pci_unregister_driver(&x38_driver); + +fail0: + pci_dev_put(mci_pdev); + + return pci_rc; +} + +static void __exit x38_exit(void) +{ + edac_dbg(3, "MC:\n"); + + pci_unregister_driver(&x38_driver); + if (!x38_registered) { + x38_remove_one(mci_pdev); + pci_dev_put(mci_pdev); + } +} + +module_init(x38_init); +module_exit(x38_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cluster Computing, Inc. Hitoshi Mitake"); +MODULE_DESCRIPTION("MC support for Intel X38 memory hub controllers"); + +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI"); diff --git a/drivers/edac/xgene_edac.c b/drivers/edac/xgene_edac.c new file mode 100644 index 000000000..54081403d --- /dev/null +++ b/drivers/edac/xgene_edac.c @@ -0,0 +1,2042 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * APM X-Gene SoC EDAC (error detection and correction) + * + * Copyright (c) 2015, Applied Micro Circuits Corporation + * Author: Feng Kan <fkan@apm.com> + * Loc Ho <lho@apm.com> + */ + +#include <linux/ctype.h> +#include <linux/edac.h> +#include <linux/interrupt.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/regmap.h> + +#include "edac_module.h" + +#define EDAC_MOD_STR "xgene_edac" + +/* Global error configuration status registers (CSR) */ +#define PCPHPERRINTSTS 0x0000 +#define PCPHPERRINTMSK 0x0004 +#define MCU_CTL_ERR_MASK BIT(12) +#define IOB_PA_ERR_MASK BIT(11) +#define IOB_BA_ERR_MASK BIT(10) +#define IOB_XGIC_ERR_MASK BIT(9) +#define IOB_RB_ERR_MASK BIT(8) +#define L3C_UNCORR_ERR_MASK BIT(5) +#define MCU_UNCORR_ERR_MASK BIT(4) +#define PMD3_MERR_MASK BIT(3) +#define PMD2_MERR_MASK BIT(2) +#define PMD1_MERR_MASK BIT(1) +#define PMD0_MERR_MASK BIT(0) +#define PCPLPERRINTSTS 0x0008 +#define PCPLPERRINTMSK 0x000C +#define CSW_SWITCH_TRACE_ERR_MASK BIT(2) +#define L3C_CORR_ERR_MASK BIT(1) +#define MCU_CORR_ERR_MASK BIT(0) +#define MEMERRINTSTS 0x0010 +#define MEMERRINTMSK 0x0014 + +struct xgene_edac { + struct device *dev; + struct regmap *csw_map; + struct regmap *mcba_map; + struct regmap *mcbb_map; + struct regmap *efuse_map; + struct regmap *rb_map; + void __iomem *pcp_csr; + spinlock_t lock; + struct dentry *dfs; + + struct list_head mcus; + struct list_head pmds; + struct list_head l3s; + struct list_head socs; + + struct mutex mc_lock; + int mc_active_mask; + int mc_registered_mask; +}; + +static void xgene_edac_pcp_rd(struct xgene_edac *edac, u32 reg, u32 *val) +{ + *val = readl(edac->pcp_csr + reg); +} + +static void xgene_edac_pcp_clrbits(struct xgene_edac *edac, u32 reg, + u32 bits_mask) +{ + u32 val; + + spin_lock(&edac->lock); + val = readl(edac->pcp_csr + reg); + val &= ~bits_mask; + writel(val, edac->pcp_csr + reg); + spin_unlock(&edac->lock); +} + +static void xgene_edac_pcp_setbits(struct xgene_edac *edac, u32 reg, + u32 bits_mask) +{ + u32 val; + + spin_lock(&edac->lock); + val = readl(edac->pcp_csr + reg); + val |= bits_mask; + writel(val, edac->pcp_csr + reg); + spin_unlock(&edac->lock); +} + +/* Memory controller error CSR */ +#define MCU_MAX_RANK 8 +#define MCU_RANK_STRIDE 0x40 + +#define MCUGECR 0x0110 +#define MCU_GECR_DEMANDUCINTREN_MASK BIT(0) +#define MCU_GECR_BACKUCINTREN_MASK BIT(1) +#define MCU_GECR_CINTREN_MASK BIT(2) +#define MUC_GECR_MCUADDRERREN_MASK BIT(9) +#define MCUGESR 0x0114 +#define MCU_GESR_ADDRNOMATCH_ERR_MASK BIT(7) +#define MCU_GESR_ADDRMULTIMATCH_ERR_MASK BIT(6) +#define MCU_GESR_PHYP_ERR_MASK BIT(3) +#define MCUESRR0 0x0314 +#define MCU_ESRR_MULTUCERR_MASK BIT(3) +#define MCU_ESRR_BACKUCERR_MASK BIT(2) +#define MCU_ESRR_DEMANDUCERR_MASK BIT(1) +#define MCU_ESRR_CERR_MASK BIT(0) +#define MCUESRRA0 0x0318 +#define MCUEBLRR0 0x031c +#define MCU_EBLRR_ERRBANK_RD(src) (((src) & 0x00000007) >> 0) +#define MCUERCRR0 0x0320 +#define MCU_ERCRR_ERRROW_RD(src) (((src) & 0xFFFF0000) >> 16) +#define MCU_ERCRR_ERRCOL_RD(src) ((src) & 0x00000FFF) +#define MCUSBECNT0 0x0324 +#define MCU_SBECNT_COUNT(src) ((src) & 0xFFFF) + +#define CSW_CSWCR 0x0000 +#define CSW_CSWCR_DUALMCB_MASK BIT(0) + +#define MCBADDRMR 0x0000 +#define MCBADDRMR_MCU_INTLV_MODE_MASK BIT(3) +#define MCBADDRMR_DUALMCU_MODE_MASK BIT(2) +#define MCBADDRMR_MCB_INTLV_MODE_MASK BIT(1) +#define MCBADDRMR_ADDRESS_MODE_MASK BIT(0) + +struct xgene_edac_mc_ctx { + struct list_head next; + char *name; + struct mem_ctl_info *mci; + struct xgene_edac *edac; + void __iomem *mcu_csr; + u32 mcu_id; +}; + +static ssize_t xgene_edac_mc_err_inject_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct mem_ctl_info *mci = file->private_data; + struct xgene_edac_mc_ctx *ctx = mci->pvt_info; + int i; + + for (i = 0; i < MCU_MAX_RANK; i++) { + writel(MCU_ESRR_MULTUCERR_MASK | MCU_ESRR_BACKUCERR_MASK | + MCU_ESRR_DEMANDUCERR_MASK | MCU_ESRR_CERR_MASK, + ctx->mcu_csr + MCUESRRA0 + i * MCU_RANK_STRIDE); + } + return count; +} + +static const struct file_operations xgene_edac_mc_debug_inject_fops = { + .open = simple_open, + .write = xgene_edac_mc_err_inject_write, + .llseek = generic_file_llseek, +}; + +static void xgene_edac_mc_create_debugfs_node(struct mem_ctl_info *mci) +{ + if (!IS_ENABLED(CONFIG_EDAC_DEBUG)) + return; + + if (!mci->debugfs) + return; + + edac_debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci, + &xgene_edac_mc_debug_inject_fops); +} + +static void xgene_edac_mc_check(struct mem_ctl_info *mci) +{ + struct xgene_edac_mc_ctx *ctx = mci->pvt_info; + unsigned int pcp_hp_stat; + unsigned int pcp_lp_stat; + u32 reg; + u32 rank; + u32 bank; + u32 count; + u32 col_row; + + xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat); + xgene_edac_pcp_rd(ctx->edac, PCPLPERRINTSTS, &pcp_lp_stat); + if (!((MCU_UNCORR_ERR_MASK & pcp_hp_stat) || + (MCU_CTL_ERR_MASK & pcp_hp_stat) || + (MCU_CORR_ERR_MASK & pcp_lp_stat))) + return; + + for (rank = 0; rank < MCU_MAX_RANK; rank++) { + reg = readl(ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE); + + /* Detect uncorrectable memory error */ + if (reg & (MCU_ESRR_DEMANDUCERR_MASK | + MCU_ESRR_BACKUCERR_MASK)) { + /* Detected uncorrectable memory error */ + edac_mc_chipset_printk(mci, KERN_ERR, "X-Gene", + "MCU uncorrectable error at rank %d\n", rank); + + edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, + 1, 0, 0, 0, 0, 0, -1, mci->ctl_name, ""); + } + + /* Detect correctable memory error */ + if (reg & MCU_ESRR_CERR_MASK) { + bank = readl(ctx->mcu_csr + MCUEBLRR0 + + rank * MCU_RANK_STRIDE); + col_row = readl(ctx->mcu_csr + MCUERCRR0 + + rank * MCU_RANK_STRIDE); + count = readl(ctx->mcu_csr + MCUSBECNT0 + + rank * MCU_RANK_STRIDE); + edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene", + "MCU correctable error at rank %d bank %d column %d row %d count %d\n", + rank, MCU_EBLRR_ERRBANK_RD(bank), + MCU_ERCRR_ERRCOL_RD(col_row), + MCU_ERCRR_ERRROW_RD(col_row), + MCU_SBECNT_COUNT(count)); + + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, + 1, 0, 0, 0, 0, 0, -1, mci->ctl_name, ""); + } + + /* Clear all error registers */ + writel(0x0, ctx->mcu_csr + MCUEBLRR0 + rank * MCU_RANK_STRIDE); + writel(0x0, ctx->mcu_csr + MCUERCRR0 + rank * MCU_RANK_STRIDE); + writel(0x0, ctx->mcu_csr + MCUSBECNT0 + + rank * MCU_RANK_STRIDE); + writel(reg, ctx->mcu_csr + MCUESRR0 + rank * MCU_RANK_STRIDE); + } + + /* Detect memory controller error */ + reg = readl(ctx->mcu_csr + MCUGESR); + if (reg) { + if (reg & MCU_GESR_ADDRNOMATCH_ERR_MASK) + edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene", + "MCU address miss-match error\n"); + if (reg & MCU_GESR_ADDRMULTIMATCH_ERR_MASK) + edac_mc_chipset_printk(mci, KERN_WARNING, "X-Gene", + "MCU address multi-match error\n"); + + writel(reg, ctx->mcu_csr + MCUGESR); + } +} + +static void xgene_edac_mc_irq_ctl(struct mem_ctl_info *mci, bool enable) +{ + struct xgene_edac_mc_ctx *ctx = mci->pvt_info; + unsigned int val; + + if (edac_op_state != EDAC_OPSTATE_INT) + return; + + mutex_lock(&ctx->edac->mc_lock); + + /* + * As there is only single bit for enable error and interrupt mask, + * we must only enable top level interrupt after all MCUs are + * registered. Otherwise, if there is an error and the corresponding + * MCU has not registered, the interrupt will never get cleared. To + * determine all MCU have registered, we will keep track of active + * MCUs and registered MCUs. + */ + if (enable) { + /* Set registered MCU bit */ + ctx->edac->mc_registered_mask |= 1 << ctx->mcu_id; + + /* Enable interrupt after all active MCU registered */ + if (ctx->edac->mc_registered_mask == + ctx->edac->mc_active_mask) { + /* Enable memory controller top level interrupt */ + xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK, + MCU_UNCORR_ERR_MASK | + MCU_CTL_ERR_MASK); + xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK, + MCU_CORR_ERR_MASK); + } + + /* Enable MCU interrupt and error reporting */ + val = readl(ctx->mcu_csr + MCUGECR); + val |= MCU_GECR_DEMANDUCINTREN_MASK | + MCU_GECR_BACKUCINTREN_MASK | + MCU_GECR_CINTREN_MASK | + MUC_GECR_MCUADDRERREN_MASK; + writel(val, ctx->mcu_csr + MCUGECR); + } else { + /* Disable MCU interrupt */ + val = readl(ctx->mcu_csr + MCUGECR); + val &= ~(MCU_GECR_DEMANDUCINTREN_MASK | + MCU_GECR_BACKUCINTREN_MASK | + MCU_GECR_CINTREN_MASK | + MUC_GECR_MCUADDRERREN_MASK); + writel(val, ctx->mcu_csr + MCUGECR); + + /* Disable memory controller top level interrupt */ + xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK, + MCU_UNCORR_ERR_MASK | MCU_CTL_ERR_MASK); + xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK, + MCU_CORR_ERR_MASK); + + /* Clear registered MCU bit */ + ctx->edac->mc_registered_mask &= ~(1 << ctx->mcu_id); + } + + mutex_unlock(&ctx->edac->mc_lock); +} + +static int xgene_edac_mc_is_active(struct xgene_edac_mc_ctx *ctx, int mc_idx) +{ + unsigned int reg; + u32 mcu_mask; + + if (regmap_read(ctx->edac->csw_map, CSW_CSWCR, ®)) + return 0; + + if (reg & CSW_CSWCR_DUALMCB_MASK) { + /* + * Dual MCB active - Determine if all 4 active or just MCU0 + * and MCU2 active + */ + if (regmap_read(ctx->edac->mcbb_map, MCBADDRMR, ®)) + return 0; + mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0xF : 0x5; + } else { + /* + * Single MCB active - Determine if MCU0/MCU1 or just MCU0 + * active + */ + if (regmap_read(ctx->edac->mcba_map, MCBADDRMR, ®)) + return 0; + mcu_mask = (reg & MCBADDRMR_DUALMCU_MODE_MASK) ? 0x3 : 0x1; + } + + /* Save active MC mask if hasn't set already */ + if (!ctx->edac->mc_active_mask) + ctx->edac->mc_active_mask = mcu_mask; + + return (mcu_mask & (1 << mc_idx)) ? 1 : 0; +} + +static int xgene_edac_mc_add(struct xgene_edac *edac, struct device_node *np) +{ + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct xgene_edac_mc_ctx tmp_ctx; + struct xgene_edac_mc_ctx *ctx; + struct resource res; + int rc; + + memset(&tmp_ctx, 0, sizeof(tmp_ctx)); + tmp_ctx.edac = edac; + + if (!devres_open_group(edac->dev, xgene_edac_mc_add, GFP_KERNEL)) + return -ENOMEM; + + rc = of_address_to_resource(np, 0, &res); + if (rc < 0) { + dev_err(edac->dev, "no MCU resource address\n"); + goto err_group; + } + tmp_ctx.mcu_csr = devm_ioremap_resource(edac->dev, &res); + if (IS_ERR(tmp_ctx.mcu_csr)) { + dev_err(edac->dev, "unable to map MCU resource\n"); + rc = PTR_ERR(tmp_ctx.mcu_csr); + goto err_group; + } + + /* Ignore non-active MCU */ + if (of_property_read_u32(np, "memory-controller", &tmp_ctx.mcu_id)) { + dev_err(edac->dev, "no memory-controller property\n"); + rc = -ENODEV; + goto err_group; + } + if (!xgene_edac_mc_is_active(&tmp_ctx, tmp_ctx.mcu_id)) { + rc = -ENODEV; + goto err_group; + } + + layers[0].type = EDAC_MC_LAYER_CHIP_SELECT; + layers[0].size = 4; + layers[0].is_virt_csrow = true; + layers[1].type = EDAC_MC_LAYER_CHANNEL; + layers[1].size = 2; + layers[1].is_virt_csrow = false; + mci = edac_mc_alloc(tmp_ctx.mcu_id, ARRAY_SIZE(layers), layers, + sizeof(*ctx)); + if (!mci) { + rc = -ENOMEM; + goto err_group; + } + + ctx = mci->pvt_info; + *ctx = tmp_ctx; /* Copy over resource value */ + ctx->name = "xgene_edac_mc_err"; + ctx->mci = mci; + mci->pdev = &mci->dev; + mci->ctl_name = ctx->name; + mci->dev_name = ctx->name; + + mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 | MEM_FLAG_RDDR3 | + MEM_FLAG_DDR | MEM_FLAG_DDR2 | MEM_FLAG_DDR3; + mci->edac_ctl_cap = EDAC_FLAG_SECDED; + mci->edac_cap = EDAC_FLAG_SECDED; + mci->mod_name = EDAC_MOD_STR; + mci->ctl_page_to_phys = NULL; + mci->scrub_cap = SCRUB_FLAG_HW_SRC; + mci->scrub_mode = SCRUB_HW_SRC; + + if (edac_op_state == EDAC_OPSTATE_POLL) + mci->edac_check = xgene_edac_mc_check; + + if (edac_mc_add_mc(mci)) { + dev_err(edac->dev, "edac_mc_add_mc failed\n"); + rc = -EINVAL; + goto err_free; + } + + xgene_edac_mc_create_debugfs_node(mci); + + list_add(&ctx->next, &edac->mcus); + + xgene_edac_mc_irq_ctl(mci, true); + + devres_remove_group(edac->dev, xgene_edac_mc_add); + + dev_info(edac->dev, "X-Gene EDAC MC registered\n"); + return 0; + +err_free: + edac_mc_free(mci); +err_group: + devres_release_group(edac->dev, xgene_edac_mc_add); + return rc; +} + +static int xgene_edac_mc_remove(struct xgene_edac_mc_ctx *mcu) +{ + xgene_edac_mc_irq_ctl(mcu->mci, false); + edac_mc_del_mc(&mcu->mci->dev); + edac_mc_free(mcu->mci); + return 0; +} + +/* CPU L1/L2 error CSR */ +#define MAX_CPU_PER_PMD 2 +#define CPU_CSR_STRIDE 0x00100000 +#define CPU_L2C_PAGE 0x000D0000 +#define CPU_MEMERR_L2C_PAGE 0x000E0000 +#define CPU_MEMERR_CPU_PAGE 0x000F0000 + +#define MEMERR_CPU_ICFECR_PAGE_OFFSET 0x0000 +#define MEMERR_CPU_ICFESR_PAGE_OFFSET 0x0004 +#define MEMERR_CPU_ICFESR_ERRWAY_RD(src) (((src) & 0xFF000000) >> 24) +#define MEMERR_CPU_ICFESR_ERRINDEX_RD(src) (((src) & 0x003F0000) >> 16) +#define MEMERR_CPU_ICFESR_ERRINFO_RD(src) (((src) & 0x0000FF00) >> 8) +#define MEMERR_CPU_ICFESR_ERRTYPE_RD(src) (((src) & 0x00000070) >> 4) +#define MEMERR_CPU_ICFESR_MULTCERR_MASK BIT(2) +#define MEMERR_CPU_ICFESR_CERR_MASK BIT(0) +#define MEMERR_CPU_LSUESR_PAGE_OFFSET 0x000c +#define MEMERR_CPU_LSUESR_ERRWAY_RD(src) (((src) & 0xFF000000) >> 24) +#define MEMERR_CPU_LSUESR_ERRINDEX_RD(src) (((src) & 0x003F0000) >> 16) +#define MEMERR_CPU_LSUESR_ERRINFO_RD(src) (((src) & 0x0000FF00) >> 8) +#define MEMERR_CPU_LSUESR_ERRTYPE_RD(src) (((src) & 0x00000070) >> 4) +#define MEMERR_CPU_LSUESR_MULTCERR_MASK BIT(2) +#define MEMERR_CPU_LSUESR_CERR_MASK BIT(0) +#define MEMERR_CPU_LSUECR_PAGE_OFFSET 0x0008 +#define MEMERR_CPU_MMUECR_PAGE_OFFSET 0x0010 +#define MEMERR_CPU_MMUESR_PAGE_OFFSET 0x0014 +#define MEMERR_CPU_MMUESR_ERRWAY_RD(src) (((src) & 0xFF000000) >> 24) +#define MEMERR_CPU_MMUESR_ERRINDEX_RD(src) (((src) & 0x007F0000) >> 16) +#define MEMERR_CPU_MMUESR_ERRINFO_RD(src) (((src) & 0x0000FF00) >> 8) +#define MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK BIT(7) +#define MEMERR_CPU_MMUESR_ERRTYPE_RD(src) (((src) & 0x00000070) >> 4) +#define MEMERR_CPU_MMUESR_MULTCERR_MASK BIT(2) +#define MEMERR_CPU_MMUESR_CERR_MASK BIT(0) +#define MEMERR_CPU_ICFESRA_PAGE_OFFSET 0x0804 +#define MEMERR_CPU_LSUESRA_PAGE_OFFSET 0x080c +#define MEMERR_CPU_MMUESRA_PAGE_OFFSET 0x0814 + +#define MEMERR_L2C_L2ECR_PAGE_OFFSET 0x0000 +#define MEMERR_L2C_L2ESR_PAGE_OFFSET 0x0004 +#define MEMERR_L2C_L2ESR_ERRSYN_RD(src) (((src) & 0xFF000000) >> 24) +#define MEMERR_L2C_L2ESR_ERRWAY_RD(src) (((src) & 0x00FC0000) >> 18) +#define MEMERR_L2C_L2ESR_ERRCPU_RD(src) (((src) & 0x00020000) >> 17) +#define MEMERR_L2C_L2ESR_ERRGROUP_RD(src) (((src) & 0x0000E000) >> 13) +#define MEMERR_L2C_L2ESR_ERRACTION_RD(src) (((src) & 0x00001C00) >> 10) +#define MEMERR_L2C_L2ESR_ERRTYPE_RD(src) (((src) & 0x00000300) >> 8) +#define MEMERR_L2C_L2ESR_MULTUCERR_MASK BIT(3) +#define MEMERR_L2C_L2ESR_MULTICERR_MASK BIT(2) +#define MEMERR_L2C_L2ESR_UCERR_MASK BIT(1) +#define MEMERR_L2C_L2ESR_ERR_MASK BIT(0) +#define MEMERR_L2C_L2EALR_PAGE_OFFSET 0x0008 +#define CPUX_L2C_L2RTOCR_PAGE_OFFSET 0x0010 +#define MEMERR_L2C_L2EAHR_PAGE_OFFSET 0x000c +#define CPUX_L2C_L2RTOSR_PAGE_OFFSET 0x0014 +#define MEMERR_L2C_L2RTOSR_MULTERR_MASK BIT(1) +#define MEMERR_L2C_L2RTOSR_ERR_MASK BIT(0) +#define CPUX_L2C_L2RTOALR_PAGE_OFFSET 0x0018 +#define CPUX_L2C_L2RTOAHR_PAGE_OFFSET 0x001c +#define MEMERR_L2C_L2ESRA_PAGE_OFFSET 0x0804 + +/* + * Processor Module Domain (PMD) context - Context for a pair of processors. + * Each PMD consists of 2 CPUs and a shared L2 cache. Each CPU consists of + * its own L1 cache. + */ +struct xgene_edac_pmd_ctx { + struct list_head next; + struct device ddev; + char *name; + struct xgene_edac *edac; + struct edac_device_ctl_info *edac_dev; + void __iomem *pmd_csr; + u32 pmd; + int version; +}; + +static void xgene_edac_pmd_l1_check(struct edac_device_ctl_info *edac_dev, + int cpu_idx) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *pg_f; + u32 val; + + pg_f = ctx->pmd_csr + cpu_idx * CPU_CSR_STRIDE + CPU_MEMERR_CPU_PAGE; + + val = readl(pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET); + if (!val) + goto chk_lsu; + dev_err(edac_dev->dev, + "CPU%d L1 memory error ICF 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n", + ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val, + MEMERR_CPU_ICFESR_ERRWAY_RD(val), + MEMERR_CPU_ICFESR_ERRINDEX_RD(val), + MEMERR_CPU_ICFESR_ERRINFO_RD(val)); + if (val & MEMERR_CPU_ICFESR_CERR_MASK) + dev_err(edac_dev->dev, "One or more correctable error\n"); + if (val & MEMERR_CPU_ICFESR_MULTCERR_MASK) + dev_err(edac_dev->dev, "Multiple correctable error\n"); + switch (MEMERR_CPU_ICFESR_ERRTYPE_RD(val)) { + case 1: + dev_err(edac_dev->dev, "L1 TLB multiple hit\n"); + break; + case 2: + dev_err(edac_dev->dev, "Way select multiple hit\n"); + break; + case 3: + dev_err(edac_dev->dev, "Physical tag parity error\n"); + break; + case 4: + case 5: + dev_err(edac_dev->dev, "L1 data parity error\n"); + break; + case 6: + dev_err(edac_dev->dev, "L1 pre-decode parity error\n"); + break; + } + + /* Clear any HW errors */ + writel(val, pg_f + MEMERR_CPU_ICFESR_PAGE_OFFSET); + + if (val & (MEMERR_CPU_ICFESR_CERR_MASK | + MEMERR_CPU_ICFESR_MULTCERR_MASK)) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + +chk_lsu: + val = readl(pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET); + if (!val) + goto chk_mmu; + dev_err(edac_dev->dev, + "CPU%d memory error LSU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X\n", + ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val, + MEMERR_CPU_LSUESR_ERRWAY_RD(val), + MEMERR_CPU_LSUESR_ERRINDEX_RD(val), + MEMERR_CPU_LSUESR_ERRINFO_RD(val)); + if (val & MEMERR_CPU_LSUESR_CERR_MASK) + dev_err(edac_dev->dev, "One or more correctable error\n"); + if (val & MEMERR_CPU_LSUESR_MULTCERR_MASK) + dev_err(edac_dev->dev, "Multiple correctable error\n"); + switch (MEMERR_CPU_LSUESR_ERRTYPE_RD(val)) { + case 0: + dev_err(edac_dev->dev, "Load tag error\n"); + break; + case 1: + dev_err(edac_dev->dev, "Load data error\n"); + break; + case 2: + dev_err(edac_dev->dev, "WSL multihit error\n"); + break; + case 3: + dev_err(edac_dev->dev, "Store tag error\n"); + break; + case 4: + dev_err(edac_dev->dev, + "DTB multihit from load pipeline error\n"); + break; + case 5: + dev_err(edac_dev->dev, + "DTB multihit from store pipeline error\n"); + break; + } + + /* Clear any HW errors */ + writel(val, pg_f + MEMERR_CPU_LSUESR_PAGE_OFFSET); + + if (val & (MEMERR_CPU_LSUESR_CERR_MASK | + MEMERR_CPU_LSUESR_MULTCERR_MASK)) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + +chk_mmu: + val = readl(pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET); + if (!val) + return; + dev_err(edac_dev->dev, + "CPU%d memory error MMU 0x%08X Way 0x%02X Index 0x%02X Info 0x%02X %s\n", + ctx->pmd * MAX_CPU_PER_PMD + cpu_idx, val, + MEMERR_CPU_MMUESR_ERRWAY_RD(val), + MEMERR_CPU_MMUESR_ERRINDEX_RD(val), + MEMERR_CPU_MMUESR_ERRINFO_RD(val), + val & MEMERR_CPU_MMUESR_ERRREQSTR_LSU_MASK ? "LSU" : "ICF"); + if (val & MEMERR_CPU_MMUESR_CERR_MASK) + dev_err(edac_dev->dev, "One or more correctable error\n"); + if (val & MEMERR_CPU_MMUESR_MULTCERR_MASK) + dev_err(edac_dev->dev, "Multiple correctable error\n"); + switch (MEMERR_CPU_MMUESR_ERRTYPE_RD(val)) { + case 0: + dev_err(edac_dev->dev, "Stage 1 UTB hit error\n"); + break; + case 1: + dev_err(edac_dev->dev, "Stage 1 UTB miss error\n"); + break; + case 2: + dev_err(edac_dev->dev, "Stage 1 UTB allocate error\n"); + break; + case 3: + dev_err(edac_dev->dev, "TMO operation single bank error\n"); + break; + case 4: + dev_err(edac_dev->dev, "Stage 2 UTB error\n"); + break; + case 5: + dev_err(edac_dev->dev, "Stage 2 UTB miss error\n"); + break; + case 6: + dev_err(edac_dev->dev, "Stage 2 UTB allocate error\n"); + break; + case 7: + dev_err(edac_dev->dev, "TMO operation multiple bank error\n"); + break; + } + + /* Clear any HW errors */ + writel(val, pg_f + MEMERR_CPU_MMUESR_PAGE_OFFSET); + + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static void xgene_edac_pmd_l2_check(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *pg_d; + void __iomem *pg_e; + u32 val_hi; + u32 val_lo; + u32 val; + + /* Check L2 */ + pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE; + val = readl(pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET); + if (!val) + goto chk_l2c; + val_lo = readl(pg_e + MEMERR_L2C_L2EALR_PAGE_OFFSET); + val_hi = readl(pg_e + MEMERR_L2C_L2EAHR_PAGE_OFFSET); + dev_err(edac_dev->dev, + "PMD%d memory error L2C L2ESR 0x%08X @ 0x%08X.%08X\n", + ctx->pmd, val, val_hi, val_lo); + dev_err(edac_dev->dev, + "ErrSyndrome 0x%02X ErrWay 0x%02X ErrCpu %d ErrGroup 0x%02X ErrAction 0x%02X\n", + MEMERR_L2C_L2ESR_ERRSYN_RD(val), + MEMERR_L2C_L2ESR_ERRWAY_RD(val), + MEMERR_L2C_L2ESR_ERRCPU_RD(val), + MEMERR_L2C_L2ESR_ERRGROUP_RD(val), + MEMERR_L2C_L2ESR_ERRACTION_RD(val)); + + if (val & MEMERR_L2C_L2ESR_ERR_MASK) + dev_err(edac_dev->dev, "One or more correctable error\n"); + if (val & MEMERR_L2C_L2ESR_MULTICERR_MASK) + dev_err(edac_dev->dev, "Multiple correctable error\n"); + if (val & MEMERR_L2C_L2ESR_UCERR_MASK) + dev_err(edac_dev->dev, "One or more uncorrectable error\n"); + if (val & MEMERR_L2C_L2ESR_MULTUCERR_MASK) + dev_err(edac_dev->dev, "Multiple uncorrectable error\n"); + + switch (MEMERR_L2C_L2ESR_ERRTYPE_RD(val)) { + case 0: + dev_err(edac_dev->dev, "Outbound SDB parity error\n"); + break; + case 1: + dev_err(edac_dev->dev, "Inbound SDB parity error\n"); + break; + case 2: + dev_err(edac_dev->dev, "Tag ECC error\n"); + break; + case 3: + dev_err(edac_dev->dev, "Data ECC error\n"); + break; + } + + /* Clear any HW errors */ + writel(val, pg_e + MEMERR_L2C_L2ESR_PAGE_OFFSET); + + if (val & (MEMERR_L2C_L2ESR_ERR_MASK | + MEMERR_L2C_L2ESR_MULTICERR_MASK)) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + if (val & (MEMERR_L2C_L2ESR_UCERR_MASK | + MEMERR_L2C_L2ESR_MULTUCERR_MASK)) + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); + +chk_l2c: + /* Check if any memory request timed out on L2 cache */ + pg_d = ctx->pmd_csr + CPU_L2C_PAGE; + val = readl(pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET); + if (val) { + val_lo = readl(pg_d + CPUX_L2C_L2RTOALR_PAGE_OFFSET); + val_hi = readl(pg_d + CPUX_L2C_L2RTOAHR_PAGE_OFFSET); + dev_err(edac_dev->dev, + "PMD%d L2C error L2C RTOSR 0x%08X @ 0x%08X.%08X\n", + ctx->pmd, val, val_hi, val_lo); + writel(val, pg_d + CPUX_L2C_L2RTOSR_PAGE_OFFSET); + } +} + +static void xgene_edac_pmd_check(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + unsigned int pcp_hp_stat; + int i; + + xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat); + if (!((PMD0_MERR_MASK << ctx->pmd) & pcp_hp_stat)) + return; + + /* Check CPU L1 error */ + for (i = 0; i < MAX_CPU_PER_PMD; i++) + xgene_edac_pmd_l1_check(edac_dev, i); + + /* Check CPU L2 error */ + xgene_edac_pmd_l2_check(edac_dev); +} + +static void xgene_edac_pmd_cpu_hw_cfg(struct edac_device_ctl_info *edac_dev, + int cpu) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *pg_f = ctx->pmd_csr + cpu * CPU_CSR_STRIDE + + CPU_MEMERR_CPU_PAGE; + + /* + * Enable CPU memory error: + * MEMERR_CPU_ICFESRA, MEMERR_CPU_LSUESRA, and MEMERR_CPU_MMUESRA + */ + writel(0x00000301, pg_f + MEMERR_CPU_ICFECR_PAGE_OFFSET); + writel(0x00000301, pg_f + MEMERR_CPU_LSUECR_PAGE_OFFSET); + writel(0x00000101, pg_f + MEMERR_CPU_MMUECR_PAGE_OFFSET); +} + +static void xgene_edac_pmd_hw_cfg(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *pg_d = ctx->pmd_csr + CPU_L2C_PAGE; + void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE; + + /* Enable PMD memory error - MEMERR_L2C_L2ECR and L2C_L2RTOCR */ + writel(0x00000703, pg_e + MEMERR_L2C_L2ECR_PAGE_OFFSET); + /* Configure L2C HW request time out feature if supported */ + if (ctx->version > 1) + writel(0x00000119, pg_d + CPUX_L2C_L2RTOCR_PAGE_OFFSET); +} + +static void xgene_edac_pmd_hw_ctl(struct edac_device_ctl_info *edac_dev, + bool enable) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + int i; + + /* Enable PMD error interrupt */ + if (edac_dev->op_state == OP_RUNNING_INTERRUPT) { + if (enable) + xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK, + PMD0_MERR_MASK << ctx->pmd); + else + xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK, + PMD0_MERR_MASK << ctx->pmd); + } + + if (enable) { + xgene_edac_pmd_hw_cfg(edac_dev); + + /* Two CPUs per a PMD */ + for (i = 0; i < MAX_CPU_PER_PMD; i++) + xgene_edac_pmd_cpu_hw_cfg(edac_dev, i); + } +} + +static ssize_t xgene_edac_pmd_l1_inject_ctrl_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct edac_device_ctl_info *edac_dev = file->private_data; + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *cpux_pg_f; + int i; + + for (i = 0; i < MAX_CPU_PER_PMD; i++) { + cpux_pg_f = ctx->pmd_csr + i * CPU_CSR_STRIDE + + CPU_MEMERR_CPU_PAGE; + + writel(MEMERR_CPU_ICFESR_MULTCERR_MASK | + MEMERR_CPU_ICFESR_CERR_MASK, + cpux_pg_f + MEMERR_CPU_ICFESRA_PAGE_OFFSET); + writel(MEMERR_CPU_LSUESR_MULTCERR_MASK | + MEMERR_CPU_LSUESR_CERR_MASK, + cpux_pg_f + MEMERR_CPU_LSUESRA_PAGE_OFFSET); + writel(MEMERR_CPU_MMUESR_MULTCERR_MASK | + MEMERR_CPU_MMUESR_CERR_MASK, + cpux_pg_f + MEMERR_CPU_MMUESRA_PAGE_OFFSET); + } + return count; +} + +static ssize_t xgene_edac_pmd_l2_inject_ctrl_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct edac_device_ctl_info *edac_dev = file->private_data; + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + void __iomem *pg_e = ctx->pmd_csr + CPU_MEMERR_L2C_PAGE; + + writel(MEMERR_L2C_L2ESR_MULTUCERR_MASK | + MEMERR_L2C_L2ESR_MULTICERR_MASK | + MEMERR_L2C_L2ESR_UCERR_MASK | + MEMERR_L2C_L2ESR_ERR_MASK, + pg_e + MEMERR_L2C_L2ESRA_PAGE_OFFSET); + return count; +} + +static const struct file_operations xgene_edac_pmd_debug_inject_fops[] = { + { + .open = simple_open, + .write = xgene_edac_pmd_l1_inject_ctrl_write, + .llseek = generic_file_llseek, }, + { + .open = simple_open, + .write = xgene_edac_pmd_l2_inject_ctrl_write, + .llseek = generic_file_llseek, }, + { } +}; + +static void +xgene_edac_pmd_create_debugfs_nodes(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_pmd_ctx *ctx = edac_dev->pvt_info; + struct dentry *dbgfs_dir; + char name[10]; + + if (!IS_ENABLED(CONFIG_EDAC_DEBUG) || !ctx->edac->dfs) + return; + + snprintf(name, sizeof(name), "PMD%d", ctx->pmd); + dbgfs_dir = edac_debugfs_create_dir_at(name, ctx->edac->dfs); + if (!dbgfs_dir) + return; + + edac_debugfs_create_file("l1_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev, + &xgene_edac_pmd_debug_inject_fops[0]); + edac_debugfs_create_file("l2_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev, + &xgene_edac_pmd_debug_inject_fops[1]); +} + +static int xgene_edac_pmd_available(u32 efuse, int pmd) +{ + return (efuse & (1 << pmd)) ? 0 : 1; +} + +static int xgene_edac_pmd_add(struct xgene_edac *edac, struct device_node *np, + int version) +{ + struct edac_device_ctl_info *edac_dev; + struct xgene_edac_pmd_ctx *ctx; + struct resource res; + char edac_name[10]; + u32 pmd; + int rc; + u32 val; + + if (!devres_open_group(edac->dev, xgene_edac_pmd_add, GFP_KERNEL)) + return -ENOMEM; + + /* Determine if this PMD is disabled */ + if (of_property_read_u32(np, "pmd-controller", &pmd)) { + dev_err(edac->dev, "no pmd-controller property\n"); + rc = -ENODEV; + goto err_group; + } + rc = regmap_read(edac->efuse_map, 0, &val); + if (rc) + goto err_group; + if (!xgene_edac_pmd_available(val, pmd)) { + rc = -ENODEV; + goto err_group; + } + + snprintf(edac_name, sizeof(edac_name), "l2c%d", pmd); + edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx), + edac_name, 1, "l2c", 1, 2, NULL, + 0, edac_device_alloc_index()); + if (!edac_dev) { + rc = -ENOMEM; + goto err_group; + } + + ctx = edac_dev->pvt_info; + ctx->name = "xgene_pmd_err"; + ctx->pmd = pmd; + ctx->edac = edac; + ctx->edac_dev = edac_dev; + ctx->ddev = *edac->dev; + ctx->version = version; + edac_dev->dev = &ctx->ddev; + edac_dev->ctl_name = ctx->name; + edac_dev->dev_name = ctx->name; + edac_dev->mod_name = EDAC_MOD_STR; + + rc = of_address_to_resource(np, 0, &res); + if (rc < 0) { + dev_err(edac->dev, "no PMD resource address\n"); + goto err_free; + } + ctx->pmd_csr = devm_ioremap_resource(edac->dev, &res); + if (IS_ERR(ctx->pmd_csr)) { + dev_err(edac->dev, + "devm_ioremap_resource failed for PMD resource address\n"); + rc = PTR_ERR(ctx->pmd_csr); + goto err_free; + } + + if (edac_op_state == EDAC_OPSTATE_POLL) + edac_dev->edac_check = xgene_edac_pmd_check; + + xgene_edac_pmd_create_debugfs_nodes(edac_dev); + + rc = edac_device_add_device(edac_dev); + if (rc > 0) { + dev_err(edac->dev, "edac_device_add_device failed\n"); + rc = -ENOMEM; + goto err_free; + } + + if (edac_op_state == EDAC_OPSTATE_INT) + edac_dev->op_state = OP_RUNNING_INTERRUPT; + + list_add(&ctx->next, &edac->pmds); + + xgene_edac_pmd_hw_ctl(edac_dev, 1); + + devres_remove_group(edac->dev, xgene_edac_pmd_add); + + dev_info(edac->dev, "X-Gene EDAC PMD%d registered\n", ctx->pmd); + return 0; + +err_free: + edac_device_free_ctl_info(edac_dev); +err_group: + devres_release_group(edac->dev, xgene_edac_pmd_add); + return rc; +} + +static int xgene_edac_pmd_remove(struct xgene_edac_pmd_ctx *pmd) +{ + struct edac_device_ctl_info *edac_dev = pmd->edac_dev; + + xgene_edac_pmd_hw_ctl(edac_dev, 0); + edac_device_del_device(edac_dev->dev); + edac_device_free_ctl_info(edac_dev); + return 0; +} + +/* L3 Error device */ +#define L3C_ESR (0x0A * 4) +#define L3C_ESR_DATATAG_MASK BIT(9) +#define L3C_ESR_MULTIHIT_MASK BIT(8) +#define L3C_ESR_UCEVICT_MASK BIT(6) +#define L3C_ESR_MULTIUCERR_MASK BIT(5) +#define L3C_ESR_MULTICERR_MASK BIT(4) +#define L3C_ESR_UCERR_MASK BIT(3) +#define L3C_ESR_CERR_MASK BIT(2) +#define L3C_ESR_UCERRINTR_MASK BIT(1) +#define L3C_ESR_CERRINTR_MASK BIT(0) +#define L3C_ECR (0x0B * 4) +#define L3C_ECR_UCINTREN BIT(3) +#define L3C_ECR_CINTREN BIT(2) +#define L3C_UCERREN BIT(1) +#define L3C_CERREN BIT(0) +#define L3C_ELR (0x0C * 4) +#define L3C_ELR_ERRSYN(src) ((src & 0xFF800000) >> 23) +#define L3C_ELR_ERRWAY(src) ((src & 0x007E0000) >> 17) +#define L3C_ELR_AGENTID(src) ((src & 0x0001E000) >> 13) +#define L3C_ELR_ERRGRP(src) ((src & 0x00000F00) >> 8) +#define L3C_ELR_OPTYPE(src) ((src & 0x000000F0) >> 4) +#define L3C_ELR_PADDRHIGH(src) (src & 0x0000000F) +#define L3C_AELR (0x0D * 4) +#define L3C_BELR (0x0E * 4) +#define L3C_BELR_BANK(src) (src & 0x0000000F) + +struct xgene_edac_dev_ctx { + struct list_head next; + struct device ddev; + char *name; + struct xgene_edac *edac; + struct edac_device_ctl_info *edac_dev; + int edac_idx; + void __iomem *dev_csr; + int version; +}; + +/* + * Version 1 of the L3 controller has broken single bit correctable logic for + * certain error syndromes. Log them as uncorrectable in that case. + */ +static bool xgene_edac_l3_promote_to_uc_err(u32 l3cesr, u32 l3celr) +{ + if (l3cesr & L3C_ESR_DATATAG_MASK) { + switch (L3C_ELR_ERRSYN(l3celr)) { + case 0x13C: + case 0x0B4: + case 0x007: + case 0x00D: + case 0x00E: + case 0x019: + case 0x01A: + case 0x01C: + case 0x04E: + case 0x041: + return true; + } + } else if (L3C_ELR_ERRWAY(l3celr) == 9) + return true; + + return false; +} + +static void xgene_edac_l3_check(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + u32 l3cesr; + u32 l3celr; + u32 l3caelr; + u32 l3cbelr; + + l3cesr = readl(ctx->dev_csr + L3C_ESR); + if (!(l3cesr & (L3C_ESR_UCERR_MASK | L3C_ESR_CERR_MASK))) + return; + + if (l3cesr & L3C_ESR_UCERR_MASK) + dev_err(edac_dev->dev, "L3C uncorrectable error\n"); + if (l3cesr & L3C_ESR_CERR_MASK) + dev_warn(edac_dev->dev, "L3C correctable error\n"); + + l3celr = readl(ctx->dev_csr + L3C_ELR); + l3caelr = readl(ctx->dev_csr + L3C_AELR); + l3cbelr = readl(ctx->dev_csr + L3C_BELR); + if (l3cesr & L3C_ESR_MULTIHIT_MASK) + dev_err(edac_dev->dev, "L3C multiple hit error\n"); + if (l3cesr & L3C_ESR_UCEVICT_MASK) + dev_err(edac_dev->dev, + "L3C dropped eviction of line with error\n"); + if (l3cesr & L3C_ESR_MULTIUCERR_MASK) + dev_err(edac_dev->dev, "L3C multiple uncorrectable error\n"); + if (l3cesr & L3C_ESR_DATATAG_MASK) + dev_err(edac_dev->dev, + "L3C data error syndrome 0x%X group 0x%X\n", + L3C_ELR_ERRSYN(l3celr), L3C_ELR_ERRGRP(l3celr)); + else + dev_err(edac_dev->dev, + "L3C tag error syndrome 0x%X Way of Tag 0x%X Agent ID 0x%X Operation type 0x%X\n", + L3C_ELR_ERRSYN(l3celr), L3C_ELR_ERRWAY(l3celr), + L3C_ELR_AGENTID(l3celr), L3C_ELR_OPTYPE(l3celr)); + /* + * NOTE: Address [41:38] in L3C_ELR_PADDRHIGH(l3celr). + * Address [37:6] in l3caelr. Lower 6 bits are zero. + */ + dev_err(edac_dev->dev, "L3C error address 0x%08X.%08X bank %d\n", + L3C_ELR_PADDRHIGH(l3celr) << 6 | (l3caelr >> 26), + (l3caelr & 0x3FFFFFFF) << 6, L3C_BELR_BANK(l3cbelr)); + dev_err(edac_dev->dev, + "L3C error status register value 0x%X\n", l3cesr); + + /* Clear L3C error interrupt */ + writel(0, ctx->dev_csr + L3C_ESR); + + if (ctx->version <= 1 && + xgene_edac_l3_promote_to_uc_err(l3cesr, l3celr)) { + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); + return; + } + if (l3cesr & L3C_ESR_CERR_MASK) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + if (l3cesr & L3C_ESR_UCERR_MASK) + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static void xgene_edac_l3_hw_init(struct edac_device_ctl_info *edac_dev, + bool enable) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + u32 val; + + val = readl(ctx->dev_csr + L3C_ECR); + val |= L3C_UCERREN | L3C_CERREN; + /* On disable, we just disable interrupt but keep error enabled */ + if (edac_dev->op_state == OP_RUNNING_INTERRUPT) { + if (enable) + val |= L3C_ECR_UCINTREN | L3C_ECR_CINTREN; + else + val &= ~(L3C_ECR_UCINTREN | L3C_ECR_CINTREN); + } + writel(val, ctx->dev_csr + L3C_ECR); + + if (edac_dev->op_state == OP_RUNNING_INTERRUPT) { + /* Enable/disable L3 error top level interrupt */ + if (enable) { + xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK, + L3C_UNCORR_ERR_MASK); + xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK, + L3C_CORR_ERR_MASK); + } else { + xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK, + L3C_UNCORR_ERR_MASK); + xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK, + L3C_CORR_ERR_MASK); + } + } +} + +static ssize_t xgene_edac_l3_inject_ctrl_write(struct file *file, + const char __user *data, + size_t count, loff_t *ppos) +{ + struct edac_device_ctl_info *edac_dev = file->private_data; + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + + /* Generate all errors */ + writel(0xFFFFFFFF, ctx->dev_csr + L3C_ESR); + return count; +} + +static const struct file_operations xgene_edac_l3_debug_inject_fops = { + .open = simple_open, + .write = xgene_edac_l3_inject_ctrl_write, + .llseek = generic_file_llseek +}; + +static void +xgene_edac_l3_create_debugfs_nodes(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + struct dentry *dbgfs_dir; + char name[10]; + + if (!IS_ENABLED(CONFIG_EDAC_DEBUG) || !ctx->edac->dfs) + return; + + snprintf(name, sizeof(name), "l3c%d", ctx->edac_idx); + dbgfs_dir = edac_debugfs_create_dir_at(name, ctx->edac->dfs); + if (!dbgfs_dir) + return; + + debugfs_create_file("l3_inject_ctrl", S_IWUSR, dbgfs_dir, edac_dev, + &xgene_edac_l3_debug_inject_fops); +} + +static int xgene_edac_l3_add(struct xgene_edac *edac, struct device_node *np, + int version) +{ + struct edac_device_ctl_info *edac_dev; + struct xgene_edac_dev_ctx *ctx; + struct resource res; + void __iomem *dev_csr; + int edac_idx; + int rc = 0; + + if (!devres_open_group(edac->dev, xgene_edac_l3_add, GFP_KERNEL)) + return -ENOMEM; + + rc = of_address_to_resource(np, 0, &res); + if (rc < 0) { + dev_err(edac->dev, "no L3 resource address\n"); + goto err_release_group; + } + dev_csr = devm_ioremap_resource(edac->dev, &res); + if (IS_ERR(dev_csr)) { + dev_err(edac->dev, + "devm_ioremap_resource failed for L3 resource address\n"); + rc = PTR_ERR(dev_csr); + goto err_release_group; + } + + edac_idx = edac_device_alloc_index(); + edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx), + "l3c", 1, "l3c", 1, 0, NULL, 0, + edac_idx); + if (!edac_dev) { + rc = -ENOMEM; + goto err_release_group; + } + + ctx = edac_dev->pvt_info; + ctx->dev_csr = dev_csr; + ctx->name = "xgene_l3_err"; + ctx->edac_idx = edac_idx; + ctx->edac = edac; + ctx->edac_dev = edac_dev; + ctx->ddev = *edac->dev; + ctx->version = version; + edac_dev->dev = &ctx->ddev; + edac_dev->ctl_name = ctx->name; + edac_dev->dev_name = ctx->name; + edac_dev->mod_name = EDAC_MOD_STR; + + if (edac_op_state == EDAC_OPSTATE_POLL) + edac_dev->edac_check = xgene_edac_l3_check; + + xgene_edac_l3_create_debugfs_nodes(edac_dev); + + rc = edac_device_add_device(edac_dev); + if (rc > 0) { + dev_err(edac->dev, "failed edac_device_add_device()\n"); + rc = -ENOMEM; + goto err_ctl_free; + } + + if (edac_op_state == EDAC_OPSTATE_INT) + edac_dev->op_state = OP_RUNNING_INTERRUPT; + + list_add(&ctx->next, &edac->l3s); + + xgene_edac_l3_hw_init(edac_dev, 1); + + devres_remove_group(edac->dev, xgene_edac_l3_add); + + dev_info(edac->dev, "X-Gene EDAC L3 registered\n"); + return 0; + +err_ctl_free: + edac_device_free_ctl_info(edac_dev); +err_release_group: + devres_release_group(edac->dev, xgene_edac_l3_add); + return rc; +} + +static int xgene_edac_l3_remove(struct xgene_edac_dev_ctx *l3) +{ + struct edac_device_ctl_info *edac_dev = l3->edac_dev; + + xgene_edac_l3_hw_init(edac_dev, 0); + edac_device_del_device(l3->edac->dev); + edac_device_free_ctl_info(edac_dev); + return 0; +} + +/* SoC error device */ +#define IOBAXIS0TRANSERRINTSTS 0x0000 +#define IOBAXIS0_M_ILLEGAL_ACCESS_MASK BIT(1) +#define IOBAXIS0_ILLEGAL_ACCESS_MASK BIT(0) +#define IOBAXIS0TRANSERRINTMSK 0x0004 +#define IOBAXIS0TRANSERRREQINFOL 0x0008 +#define IOBAXIS0TRANSERRREQINFOH 0x000c +#define REQTYPE_RD(src) (((src) & BIT(0))) +#define ERRADDRH_RD(src) (((src) & 0xffc00000) >> 22) +#define IOBAXIS1TRANSERRINTSTS 0x0010 +#define IOBAXIS1TRANSERRINTMSK 0x0014 +#define IOBAXIS1TRANSERRREQINFOL 0x0018 +#define IOBAXIS1TRANSERRREQINFOH 0x001c +#define IOBPATRANSERRINTSTS 0x0020 +#define IOBPA_M_REQIDRAM_CORRUPT_MASK BIT(7) +#define IOBPA_REQIDRAM_CORRUPT_MASK BIT(6) +#define IOBPA_M_TRANS_CORRUPT_MASK BIT(5) +#define IOBPA_TRANS_CORRUPT_MASK BIT(4) +#define IOBPA_M_WDATA_CORRUPT_MASK BIT(3) +#define IOBPA_WDATA_CORRUPT_MASK BIT(2) +#define IOBPA_M_RDATA_CORRUPT_MASK BIT(1) +#define IOBPA_RDATA_CORRUPT_MASK BIT(0) +#define IOBBATRANSERRINTSTS 0x0030 +#define M_ILLEGAL_ACCESS_MASK BIT(15) +#define ILLEGAL_ACCESS_MASK BIT(14) +#define M_WIDRAM_CORRUPT_MASK BIT(13) +#define WIDRAM_CORRUPT_MASK BIT(12) +#define M_RIDRAM_CORRUPT_MASK BIT(11) +#define RIDRAM_CORRUPT_MASK BIT(10) +#define M_TRANS_CORRUPT_MASK BIT(9) +#define TRANS_CORRUPT_MASK BIT(8) +#define M_WDATA_CORRUPT_MASK BIT(7) +#define WDATA_CORRUPT_MASK BIT(6) +#define M_RBM_POISONED_REQ_MASK BIT(5) +#define RBM_POISONED_REQ_MASK BIT(4) +#define M_XGIC_POISONED_REQ_MASK BIT(3) +#define XGIC_POISONED_REQ_MASK BIT(2) +#define M_WRERR_RESP_MASK BIT(1) +#define WRERR_RESP_MASK BIT(0) +#define IOBBATRANSERRREQINFOL 0x0038 +#define IOBBATRANSERRREQINFOH 0x003c +#define REQTYPE_F2_RD(src) ((src) & BIT(0)) +#define ERRADDRH_F2_RD(src) (((src) & 0xffc00000) >> 22) +#define IOBBATRANSERRCSWREQID 0x0040 +#define XGICTRANSERRINTSTS 0x0050 +#define M_WR_ACCESS_ERR_MASK BIT(3) +#define WR_ACCESS_ERR_MASK BIT(2) +#define M_RD_ACCESS_ERR_MASK BIT(1) +#define RD_ACCESS_ERR_MASK BIT(0) +#define XGICTRANSERRINTMSK 0x0054 +#define XGICTRANSERRREQINFO 0x0058 +#define REQTYPE_MASK BIT(26) +#define ERRADDR_RD(src) ((src) & 0x03ffffff) +#define GLBL_ERR_STS 0x0800 +#define MDED_ERR_MASK BIT(3) +#define DED_ERR_MASK BIT(2) +#define MSEC_ERR_MASK BIT(1) +#define SEC_ERR_MASK BIT(0) +#define GLBL_SEC_ERRL 0x0810 +#define GLBL_SEC_ERRH 0x0818 +#define GLBL_MSEC_ERRL 0x0820 +#define GLBL_MSEC_ERRH 0x0828 +#define GLBL_DED_ERRL 0x0830 +#define GLBL_DED_ERRLMASK 0x0834 +#define GLBL_DED_ERRH 0x0838 +#define GLBL_DED_ERRHMASK 0x083c +#define GLBL_MDED_ERRL 0x0840 +#define GLBL_MDED_ERRLMASK 0x0844 +#define GLBL_MDED_ERRH 0x0848 +#define GLBL_MDED_ERRHMASK 0x084c + +/* IO Bus Registers */ +#define RBCSR 0x0000 +#define STICKYERR_MASK BIT(0) +#define RBEIR 0x0008 +#define AGENT_OFFLINE_ERR_MASK BIT(30) +#define UNIMPL_RBPAGE_ERR_MASK BIT(29) +#define WORD_ALIGNED_ERR_MASK BIT(28) +#define PAGE_ACCESS_ERR_MASK BIT(27) +#define WRITE_ACCESS_MASK BIT(26) + +static const char * const soc_mem_err_v1[] = { + "10GbE0", + "10GbE1", + "Security", + "SATA45", + "SATA23/ETH23", + "SATA01/ETH01", + "USB1", + "USB0", + "QML", + "QM0", + "QM1 (XGbE01)", + "PCIE4", + "PCIE3", + "PCIE2", + "PCIE1", + "PCIE0", + "CTX Manager", + "OCM", + "1GbE", + "CLE", + "AHBC", + "PktDMA", + "GFC", + "MSLIM", + "10GbE2", + "10GbE3", + "QM2 (XGbE23)", + "IOB", + "unknown", + "unknown", + "unknown", + "unknown", +}; + +static void xgene_edac_iob_gic_report(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + u32 err_addr_lo; + u32 err_addr_hi; + u32 reg; + u32 info; + + /* GIC transaction error interrupt */ + reg = readl(ctx->dev_csr + XGICTRANSERRINTSTS); + if (!reg) + goto chk_iob_err; + dev_err(edac_dev->dev, "XGIC transaction error\n"); + if (reg & RD_ACCESS_ERR_MASK) + dev_err(edac_dev->dev, "XGIC read size error\n"); + if (reg & M_RD_ACCESS_ERR_MASK) + dev_err(edac_dev->dev, "Multiple XGIC read size error\n"); + if (reg & WR_ACCESS_ERR_MASK) + dev_err(edac_dev->dev, "XGIC write size error\n"); + if (reg & M_WR_ACCESS_ERR_MASK) + dev_err(edac_dev->dev, "Multiple XGIC write size error\n"); + info = readl(ctx->dev_csr + XGICTRANSERRREQINFO); + dev_err(edac_dev->dev, "XGIC %s access @ 0x%08X (0x%08X)\n", + info & REQTYPE_MASK ? "read" : "write", ERRADDR_RD(info), + info); + writel(reg, ctx->dev_csr + XGICTRANSERRINTSTS); + +chk_iob_err: + /* IOB memory error */ + reg = readl(ctx->dev_csr + GLBL_ERR_STS); + if (!reg) + return; + if (reg & SEC_ERR_MASK) { + err_addr_lo = readl(ctx->dev_csr + GLBL_SEC_ERRL); + err_addr_hi = readl(ctx->dev_csr + GLBL_SEC_ERRH); + dev_err(edac_dev->dev, + "IOB single-bit correctable memory at 0x%08X.%08X error\n", + err_addr_lo, err_addr_hi); + writel(err_addr_lo, ctx->dev_csr + GLBL_SEC_ERRL); + writel(err_addr_hi, ctx->dev_csr + GLBL_SEC_ERRH); + } + if (reg & MSEC_ERR_MASK) { + err_addr_lo = readl(ctx->dev_csr + GLBL_MSEC_ERRL); + err_addr_hi = readl(ctx->dev_csr + GLBL_MSEC_ERRH); + dev_err(edac_dev->dev, + "IOB multiple single-bit correctable memory at 0x%08X.%08X error\n", + err_addr_lo, err_addr_hi); + writel(err_addr_lo, ctx->dev_csr + GLBL_MSEC_ERRL); + writel(err_addr_hi, ctx->dev_csr + GLBL_MSEC_ERRH); + } + if (reg & (SEC_ERR_MASK | MSEC_ERR_MASK)) + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + + if (reg & DED_ERR_MASK) { + err_addr_lo = readl(ctx->dev_csr + GLBL_DED_ERRL); + err_addr_hi = readl(ctx->dev_csr + GLBL_DED_ERRH); + dev_err(edac_dev->dev, + "IOB double-bit uncorrectable memory at 0x%08X.%08X error\n", + err_addr_lo, err_addr_hi); + writel(err_addr_lo, ctx->dev_csr + GLBL_DED_ERRL); + writel(err_addr_hi, ctx->dev_csr + GLBL_DED_ERRH); + } + if (reg & MDED_ERR_MASK) { + err_addr_lo = readl(ctx->dev_csr + GLBL_MDED_ERRL); + err_addr_hi = readl(ctx->dev_csr + GLBL_MDED_ERRH); + dev_err(edac_dev->dev, + "Multiple IOB double-bit uncorrectable memory at 0x%08X.%08X error\n", + err_addr_lo, err_addr_hi); + writel(err_addr_lo, ctx->dev_csr + GLBL_MDED_ERRL); + writel(err_addr_hi, ctx->dev_csr + GLBL_MDED_ERRH); + } + if (reg & (DED_ERR_MASK | MDED_ERR_MASK)) + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); +} + +static void xgene_edac_rb_report(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + u32 err_addr_lo; + u32 err_addr_hi; + u32 reg; + + /* If the register bus resource isn't available, just skip it */ + if (!ctx->edac->rb_map) + goto rb_skip; + + /* + * Check RB access errors + * 1. Out of range + * 2. Un-implemented page + * 3. Un-aligned access + * 4. Offline slave IP + */ + if (regmap_read(ctx->edac->rb_map, RBCSR, ®)) + return; + if (reg & STICKYERR_MASK) { + bool write; + + dev_err(edac_dev->dev, "IOB bus access error(s)\n"); + if (regmap_read(ctx->edac->rb_map, RBEIR, ®)) + return; + write = reg & WRITE_ACCESS_MASK ? 1 : 0; + if (reg & AGENT_OFFLINE_ERR_MASK) + dev_err(edac_dev->dev, + "IOB bus %s access to offline agent error\n", + write ? "write" : "read"); + if (reg & UNIMPL_RBPAGE_ERR_MASK) + dev_err(edac_dev->dev, + "IOB bus %s access to unimplemented page error\n", + write ? "write" : "read"); + if (reg & WORD_ALIGNED_ERR_MASK) + dev_err(edac_dev->dev, + "IOB bus %s word aligned access error\n", + write ? "write" : "read"); + if (reg & PAGE_ACCESS_ERR_MASK) + dev_err(edac_dev->dev, + "IOB bus %s to page out of range access error\n", + write ? "write" : "read"); + if (regmap_write(ctx->edac->rb_map, RBEIR, 0)) + return; + if (regmap_write(ctx->edac->rb_map, RBCSR, 0)) + return; + } +rb_skip: + + /* IOB Bridge agent transaction error interrupt */ + reg = readl(ctx->dev_csr + IOBBATRANSERRINTSTS); + if (!reg) + return; + + dev_err(edac_dev->dev, "IOB bridge agent (BA) transaction error\n"); + if (reg & WRERR_RESP_MASK) + dev_err(edac_dev->dev, "IOB BA write response error\n"); + if (reg & M_WRERR_RESP_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA write response error\n"); + if (reg & XGIC_POISONED_REQ_MASK) + dev_err(edac_dev->dev, "IOB BA XGIC poisoned write error\n"); + if (reg & M_XGIC_POISONED_REQ_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA XGIC poisoned write error\n"); + if (reg & RBM_POISONED_REQ_MASK) + dev_err(edac_dev->dev, "IOB BA RBM poisoned write error\n"); + if (reg & M_RBM_POISONED_REQ_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA RBM poisoned write error\n"); + if (reg & WDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB BA write error\n"); + if (reg & M_WDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, "Multiple IOB BA write error\n"); + if (reg & TRANS_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB BA transaction error\n"); + if (reg & M_TRANS_CORRUPT_MASK) + dev_err(edac_dev->dev, "Multiple IOB BA transaction error\n"); + if (reg & RIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, + "IOB BA RDIDRAM read transaction ID error\n"); + if (reg & M_RIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA RDIDRAM read transaction ID error\n"); + if (reg & WIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, + "IOB BA RDIDRAM write transaction ID error\n"); + if (reg & M_WIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA RDIDRAM write transaction ID error\n"); + if (reg & ILLEGAL_ACCESS_MASK) + dev_err(edac_dev->dev, + "IOB BA XGIC/RB illegal access error\n"); + if (reg & M_ILLEGAL_ACCESS_MASK) + dev_err(edac_dev->dev, + "Multiple IOB BA XGIC/RB illegal access error\n"); + + err_addr_lo = readl(ctx->dev_csr + IOBBATRANSERRREQINFOL); + err_addr_hi = readl(ctx->dev_csr + IOBBATRANSERRREQINFOH); + dev_err(edac_dev->dev, "IOB BA %s access at 0x%02X.%08X (0x%08X)\n", + REQTYPE_F2_RD(err_addr_hi) ? "read" : "write", + ERRADDRH_F2_RD(err_addr_hi), err_addr_lo, err_addr_hi); + if (reg & WRERR_RESP_MASK) + dev_err(edac_dev->dev, "IOB BA requestor ID 0x%08X\n", + readl(ctx->dev_csr + IOBBATRANSERRCSWREQID)); + writel(reg, ctx->dev_csr + IOBBATRANSERRINTSTS); +} + +static void xgene_edac_pa_report(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + u32 err_addr_lo; + u32 err_addr_hi; + u32 reg; + + /* IOB Processing agent transaction error interrupt */ + reg = readl(ctx->dev_csr + IOBPATRANSERRINTSTS); + if (!reg) + goto chk_iob_axi0; + dev_err(edac_dev->dev, "IOB processing agent (PA) transaction error\n"); + if (reg & IOBPA_RDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB PA read data RAM error\n"); + if (reg & IOBPA_M_RDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, + "Multiple IOB PA read data RAM error\n"); + if (reg & IOBPA_WDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB PA write data RAM error\n"); + if (reg & IOBPA_M_WDATA_CORRUPT_MASK) + dev_err(edac_dev->dev, + "Multiple IOB PA write data RAM error\n"); + if (reg & IOBPA_TRANS_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB PA transaction error\n"); + if (reg & IOBPA_M_TRANS_CORRUPT_MASK) + dev_err(edac_dev->dev, "Multiple IOB PA transaction error\n"); + if (reg & IOBPA_REQIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, "IOB PA transaction ID RAM error\n"); + if (reg & IOBPA_M_REQIDRAM_CORRUPT_MASK) + dev_err(edac_dev->dev, + "Multiple IOB PA transaction ID RAM error\n"); + writel(reg, ctx->dev_csr + IOBPATRANSERRINTSTS); + +chk_iob_axi0: + /* IOB AXI0 Error */ + reg = readl(ctx->dev_csr + IOBAXIS0TRANSERRINTSTS); + if (!reg) + goto chk_iob_axi1; + err_addr_lo = readl(ctx->dev_csr + IOBAXIS0TRANSERRREQINFOL); + err_addr_hi = readl(ctx->dev_csr + IOBAXIS0TRANSERRREQINFOH); + dev_err(edac_dev->dev, + "%sAXI slave 0 illegal %s access @ 0x%02X.%08X (0x%08X)\n", + reg & IOBAXIS0_M_ILLEGAL_ACCESS_MASK ? "Multiple " : "", + REQTYPE_RD(err_addr_hi) ? "read" : "write", + ERRADDRH_RD(err_addr_hi), err_addr_lo, err_addr_hi); + writel(reg, ctx->dev_csr + IOBAXIS0TRANSERRINTSTS); + +chk_iob_axi1: + /* IOB AXI1 Error */ + reg = readl(ctx->dev_csr + IOBAXIS1TRANSERRINTSTS); + if (!reg) + return; + err_addr_lo = readl(ctx->dev_csr + IOBAXIS1TRANSERRREQINFOL); + err_addr_hi = readl(ctx->dev_csr + IOBAXIS1TRANSERRREQINFOH); + dev_err(edac_dev->dev, + "%sAXI slave 1 illegal %s access @ 0x%02X.%08X (0x%08X)\n", + reg & IOBAXIS0_M_ILLEGAL_ACCESS_MASK ? "Multiple " : "", + REQTYPE_RD(err_addr_hi) ? "read" : "write", + ERRADDRH_RD(err_addr_hi), err_addr_lo, err_addr_hi); + writel(reg, ctx->dev_csr + IOBAXIS1TRANSERRINTSTS); +} + +static void xgene_edac_soc_check(struct edac_device_ctl_info *edac_dev) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + const char * const *soc_mem_err = NULL; + u32 pcp_hp_stat; + u32 pcp_lp_stat; + u32 reg; + int i; + + xgene_edac_pcp_rd(ctx->edac, PCPHPERRINTSTS, &pcp_hp_stat); + xgene_edac_pcp_rd(ctx->edac, PCPLPERRINTSTS, &pcp_lp_stat); + xgene_edac_pcp_rd(ctx->edac, MEMERRINTSTS, ®); + if (!((pcp_hp_stat & (IOB_PA_ERR_MASK | IOB_BA_ERR_MASK | + IOB_XGIC_ERR_MASK | IOB_RB_ERR_MASK)) || + (pcp_lp_stat & CSW_SWITCH_TRACE_ERR_MASK) || reg)) + return; + + if (pcp_hp_stat & IOB_XGIC_ERR_MASK) + xgene_edac_iob_gic_report(edac_dev); + + if (pcp_hp_stat & (IOB_RB_ERR_MASK | IOB_BA_ERR_MASK)) + xgene_edac_rb_report(edac_dev); + + if (pcp_hp_stat & IOB_PA_ERR_MASK) + xgene_edac_pa_report(edac_dev); + + if (pcp_lp_stat & CSW_SWITCH_TRACE_ERR_MASK) { + dev_info(edac_dev->dev, + "CSW switch trace correctable memory parity error\n"); + edac_device_handle_ce(edac_dev, 0, 0, edac_dev->ctl_name); + } + + if (!reg) + return; + if (ctx->version == 1) + soc_mem_err = soc_mem_err_v1; + if (!soc_mem_err) { + dev_err(edac_dev->dev, "SoC memory parity error 0x%08X\n", + reg); + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); + return; + } + for (i = 0; i < 31; i++) { + if (reg & (1 << i)) { + dev_err(edac_dev->dev, "%s memory parity error\n", + soc_mem_err[i]); + edac_device_handle_ue(edac_dev, 0, 0, + edac_dev->ctl_name); + } + } +} + +static void xgene_edac_soc_hw_init(struct edac_device_ctl_info *edac_dev, + bool enable) +{ + struct xgene_edac_dev_ctx *ctx = edac_dev->pvt_info; + + /* Enable SoC IP error interrupt */ + if (edac_dev->op_state == OP_RUNNING_INTERRUPT) { + if (enable) { + xgene_edac_pcp_clrbits(ctx->edac, PCPHPERRINTMSK, + IOB_PA_ERR_MASK | + IOB_BA_ERR_MASK | + IOB_XGIC_ERR_MASK | + IOB_RB_ERR_MASK); + xgene_edac_pcp_clrbits(ctx->edac, PCPLPERRINTMSK, + CSW_SWITCH_TRACE_ERR_MASK); + } else { + xgene_edac_pcp_setbits(ctx->edac, PCPHPERRINTMSK, + IOB_PA_ERR_MASK | + IOB_BA_ERR_MASK | + IOB_XGIC_ERR_MASK | + IOB_RB_ERR_MASK); + xgene_edac_pcp_setbits(ctx->edac, PCPLPERRINTMSK, + CSW_SWITCH_TRACE_ERR_MASK); + } + + writel(enable ? 0x0 : 0xFFFFFFFF, + ctx->dev_csr + IOBAXIS0TRANSERRINTMSK); + writel(enable ? 0x0 : 0xFFFFFFFF, + ctx->dev_csr + IOBAXIS1TRANSERRINTMSK); + writel(enable ? 0x0 : 0xFFFFFFFF, + ctx->dev_csr + XGICTRANSERRINTMSK); + + xgene_edac_pcp_setbits(ctx->edac, MEMERRINTMSK, + enable ? 0x0 : 0xFFFFFFFF); + } +} + +static int xgene_edac_soc_add(struct xgene_edac *edac, struct device_node *np, + int version) +{ + struct edac_device_ctl_info *edac_dev; + struct xgene_edac_dev_ctx *ctx; + void __iomem *dev_csr; + struct resource res; + int edac_idx; + int rc; + + if (!devres_open_group(edac->dev, xgene_edac_soc_add, GFP_KERNEL)) + return -ENOMEM; + + rc = of_address_to_resource(np, 0, &res); + if (rc < 0) { + dev_err(edac->dev, "no SoC resource address\n"); + goto err_release_group; + } + dev_csr = devm_ioremap_resource(edac->dev, &res); + if (IS_ERR(dev_csr)) { + dev_err(edac->dev, + "devm_ioremap_resource failed for soc resource address\n"); + rc = PTR_ERR(dev_csr); + goto err_release_group; + } + + edac_idx = edac_device_alloc_index(); + edac_dev = edac_device_alloc_ctl_info(sizeof(*ctx), + "SOC", 1, "SOC", 1, 2, NULL, 0, + edac_idx); + if (!edac_dev) { + rc = -ENOMEM; + goto err_release_group; + } + + ctx = edac_dev->pvt_info; + ctx->dev_csr = dev_csr; + ctx->name = "xgene_soc_err"; + ctx->edac_idx = edac_idx; + ctx->edac = edac; + ctx->edac_dev = edac_dev; + ctx->ddev = *edac->dev; + ctx->version = version; + edac_dev->dev = &ctx->ddev; + edac_dev->ctl_name = ctx->name; + edac_dev->dev_name = ctx->name; + edac_dev->mod_name = EDAC_MOD_STR; + + if (edac_op_state == EDAC_OPSTATE_POLL) + edac_dev->edac_check = xgene_edac_soc_check; + + rc = edac_device_add_device(edac_dev); + if (rc > 0) { + dev_err(edac->dev, "failed edac_device_add_device()\n"); + rc = -ENOMEM; + goto err_ctl_free; + } + + if (edac_op_state == EDAC_OPSTATE_INT) + edac_dev->op_state = OP_RUNNING_INTERRUPT; + + list_add(&ctx->next, &edac->socs); + + xgene_edac_soc_hw_init(edac_dev, 1); + + devres_remove_group(edac->dev, xgene_edac_soc_add); + + dev_info(edac->dev, "X-Gene EDAC SoC registered\n"); + + return 0; + +err_ctl_free: + edac_device_free_ctl_info(edac_dev); +err_release_group: + devres_release_group(edac->dev, xgene_edac_soc_add); + return rc; +} + +static int xgene_edac_soc_remove(struct xgene_edac_dev_ctx *soc) +{ + struct edac_device_ctl_info *edac_dev = soc->edac_dev; + + xgene_edac_soc_hw_init(edac_dev, 0); + edac_device_del_device(soc->edac->dev); + edac_device_free_ctl_info(edac_dev); + return 0; +} + +static irqreturn_t xgene_edac_isr(int irq, void *dev_id) +{ + struct xgene_edac *ctx = dev_id; + struct xgene_edac_pmd_ctx *pmd; + struct xgene_edac_dev_ctx *node; + unsigned int pcp_hp_stat; + unsigned int pcp_lp_stat; + + xgene_edac_pcp_rd(ctx, PCPHPERRINTSTS, &pcp_hp_stat); + xgene_edac_pcp_rd(ctx, PCPLPERRINTSTS, &pcp_lp_stat); + if ((MCU_UNCORR_ERR_MASK & pcp_hp_stat) || + (MCU_CTL_ERR_MASK & pcp_hp_stat) || + (MCU_CORR_ERR_MASK & pcp_lp_stat)) { + struct xgene_edac_mc_ctx *mcu; + + list_for_each_entry(mcu, &ctx->mcus, next) + xgene_edac_mc_check(mcu->mci); + } + + list_for_each_entry(pmd, &ctx->pmds, next) { + if ((PMD0_MERR_MASK << pmd->pmd) & pcp_hp_stat) + xgene_edac_pmd_check(pmd->edac_dev); + } + + list_for_each_entry(node, &ctx->l3s, next) + xgene_edac_l3_check(node->edac_dev); + + list_for_each_entry(node, &ctx->socs, next) + xgene_edac_soc_check(node->edac_dev); + + return IRQ_HANDLED; +} + +static int xgene_edac_probe(struct platform_device *pdev) +{ + struct xgene_edac *edac; + struct device_node *child; + struct resource *res; + int rc; + + edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL); + if (!edac) + return -ENOMEM; + + edac->dev = &pdev->dev; + platform_set_drvdata(pdev, edac); + INIT_LIST_HEAD(&edac->mcus); + INIT_LIST_HEAD(&edac->pmds); + INIT_LIST_HEAD(&edac->l3s); + INIT_LIST_HEAD(&edac->socs); + spin_lock_init(&edac->lock); + mutex_init(&edac->mc_lock); + + edac->csw_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "regmap-csw"); + if (IS_ERR(edac->csw_map)) { + dev_err(edac->dev, "unable to get syscon regmap csw\n"); + rc = PTR_ERR(edac->csw_map); + goto out_err; + } + + edac->mcba_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "regmap-mcba"); + if (IS_ERR(edac->mcba_map)) { + dev_err(edac->dev, "unable to get syscon regmap mcba\n"); + rc = PTR_ERR(edac->mcba_map); + goto out_err; + } + + edac->mcbb_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "regmap-mcbb"); + if (IS_ERR(edac->mcbb_map)) { + dev_err(edac->dev, "unable to get syscon regmap mcbb\n"); + rc = PTR_ERR(edac->mcbb_map); + goto out_err; + } + edac->efuse_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "regmap-efuse"); + if (IS_ERR(edac->efuse_map)) { + dev_err(edac->dev, "unable to get syscon regmap efuse\n"); + rc = PTR_ERR(edac->efuse_map); + goto out_err; + } + + /* + * NOTE: The register bus resource is optional for compatibility + * reason. + */ + edac->rb_map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "regmap-rb"); + if (IS_ERR(edac->rb_map)) { + dev_warn(edac->dev, "missing syscon regmap rb\n"); + edac->rb_map = NULL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + edac->pcp_csr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(edac->pcp_csr)) { + dev_err(&pdev->dev, "no PCP resource address\n"); + rc = PTR_ERR(edac->pcp_csr); + goto out_err; + } + + if (edac_op_state == EDAC_OPSTATE_INT) { + int irq; + int i; + + for (i = 0; i < 3; i++) { + irq = platform_get_irq_optional(pdev, i); + if (irq < 0) { + dev_err(&pdev->dev, "No IRQ resource\n"); + rc = irq; + goto out_err; + } + rc = devm_request_irq(&pdev->dev, irq, + xgene_edac_isr, IRQF_SHARED, + dev_name(&pdev->dev), edac); + if (rc) { + dev_err(&pdev->dev, + "Could not request IRQ %d\n", irq); + goto out_err; + } + } + } + + edac->dfs = edac_debugfs_create_dir(pdev->dev.kobj.name); + + for_each_child_of_node(pdev->dev.of_node, child) { + if (!of_device_is_available(child)) + continue; + if (of_device_is_compatible(child, "apm,xgene-edac-mc")) + xgene_edac_mc_add(edac, child); + if (of_device_is_compatible(child, "apm,xgene-edac-pmd")) + xgene_edac_pmd_add(edac, child, 1); + if (of_device_is_compatible(child, "apm,xgene-edac-pmd-v2")) + xgene_edac_pmd_add(edac, child, 2); + if (of_device_is_compatible(child, "apm,xgene-edac-l3")) + xgene_edac_l3_add(edac, child, 1); + if (of_device_is_compatible(child, "apm,xgene-edac-l3-v2")) + xgene_edac_l3_add(edac, child, 2); + if (of_device_is_compatible(child, "apm,xgene-edac-soc")) + xgene_edac_soc_add(edac, child, 0); + if (of_device_is_compatible(child, "apm,xgene-edac-soc-v1")) + xgene_edac_soc_add(edac, child, 1); + } + + return 0; + +out_err: + return rc; +} + +static int xgene_edac_remove(struct platform_device *pdev) +{ + struct xgene_edac *edac = dev_get_drvdata(&pdev->dev); + struct xgene_edac_mc_ctx *mcu; + struct xgene_edac_mc_ctx *temp_mcu; + struct xgene_edac_pmd_ctx *pmd; + struct xgene_edac_pmd_ctx *temp_pmd; + struct xgene_edac_dev_ctx *node; + struct xgene_edac_dev_ctx *temp_node; + + list_for_each_entry_safe(mcu, temp_mcu, &edac->mcus, next) + xgene_edac_mc_remove(mcu); + + list_for_each_entry_safe(pmd, temp_pmd, &edac->pmds, next) + xgene_edac_pmd_remove(pmd); + + list_for_each_entry_safe(node, temp_node, &edac->l3s, next) + xgene_edac_l3_remove(node); + + list_for_each_entry_safe(node, temp_node, &edac->socs, next) + xgene_edac_soc_remove(node); + + return 0; +} + +static const struct of_device_id xgene_edac_of_match[] = { + { .compatible = "apm,xgene-edac" }, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_edac_of_match); + +static struct platform_driver xgene_edac_driver = { + .probe = xgene_edac_probe, + .remove = xgene_edac_remove, + .driver = { + .name = "xgene-edac", + .of_match_table = xgene_edac_of_match, + }, +}; + +static int __init xgene_edac_init(void) +{ + int rc; + + /* Make sure error reporting method is sane */ + switch (edac_op_state) { + case EDAC_OPSTATE_POLL: + case EDAC_OPSTATE_INT: + break; + default: + edac_op_state = EDAC_OPSTATE_INT; + break; + } + + rc = platform_driver_register(&xgene_edac_driver); + if (rc) { + edac_printk(KERN_ERR, EDAC_MOD_STR, + "EDAC fails to register\n"); + goto reg_failed; + } + + return 0; + +reg_failed: + return rc; +} +module_init(xgene_edac_init); + +static void __exit xgene_edac_exit(void) +{ + platform_driver_unregister(&xgene_edac_driver); +} +module_exit(xgene_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Feng Kan <fkan@apm.com>"); +MODULE_DESCRIPTION("APM X-Gene EDAC driver"); +module_param(edac_op_state, int, 0444); +MODULE_PARM_DESC(edac_op_state, + "EDAC error reporting state: 0=Poll, 2=Interrupt"); |