summaryrefslogtreecommitdiffstats
path: root/drivers/firmware/arm_scmi/driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/firmware/arm_scmi/driver.c')
-rw-r--r--drivers/firmware/arm_scmi/driver.c2698
1 files changed, 2698 insertions, 0 deletions
diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c
new file mode 100644
index 000000000..fe06dc193
--- /dev/null
+++ b/drivers/firmware/arm_scmi/driver.c
@@ -0,0 +1,2698 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * System Control and Management Interface (SCMI) Message Protocol driver
+ *
+ * SCMI Message Protocol is used between the System Control Processor(SCP)
+ * and the Application Processors(AP). The Message Handling Unit(MHU)
+ * provides a mechanism for inter-processor communication between SCP's
+ * Cortex M3 and AP.
+ *
+ * SCP offers control and management of the core/cluster power states,
+ * various power domain DVFS including the core/cluster, certain system
+ * clocks configuration, thermal sensors and many others.
+ *
+ * Copyright (C) 2018-2021 ARM Ltd.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/idr.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/hashtable.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/processor.h>
+#include <linux/refcount.h>
+#include <linux/slab.h>
+
+#include "common.h"
+#include "notify.h"
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/scmi.h>
+
+enum scmi_error_codes {
+ SCMI_SUCCESS = 0, /* Success */
+ SCMI_ERR_SUPPORT = -1, /* Not supported */
+ SCMI_ERR_PARAMS = -2, /* Invalid Parameters */
+ SCMI_ERR_ACCESS = -3, /* Invalid access/permission denied */
+ SCMI_ERR_ENTRY = -4, /* Not found */
+ SCMI_ERR_RANGE = -5, /* Value out of range */
+ SCMI_ERR_BUSY = -6, /* Device busy */
+ SCMI_ERR_COMMS = -7, /* Communication Error */
+ SCMI_ERR_GENERIC = -8, /* Generic Error */
+ SCMI_ERR_HARDWARE = -9, /* Hardware Error */
+ SCMI_ERR_PROTOCOL = -10,/* Protocol Error */
+};
+
+/* List of all SCMI devices active in system */
+static LIST_HEAD(scmi_list);
+/* Protection for the entire list */
+static DEFINE_MUTEX(scmi_list_mutex);
+/* Track the unique id for the transfers for debug & profiling purpose */
+static atomic_t transfer_last_id;
+
+static DEFINE_IDR(scmi_requested_devices);
+static DEFINE_MUTEX(scmi_requested_devices_mtx);
+
+/* Track globally the creation of SCMI SystemPower related devices */
+static bool scmi_syspower_registered;
+/* Protect access to scmi_syspower_registered */
+static DEFINE_MUTEX(scmi_syspower_mtx);
+
+struct scmi_requested_dev {
+ const struct scmi_device_id *id_table;
+ struct list_head node;
+};
+
+/**
+ * struct scmi_xfers_info - Structure to manage transfer information
+ *
+ * @xfer_alloc_table: Bitmap table for allocated messages.
+ * Index of this bitmap table is also used for message
+ * sequence identifier.
+ * @xfer_lock: Protection for message allocation
+ * @max_msg: Maximum number of messages that can be pending
+ * @free_xfers: A free list for available to use xfers. It is initialized with
+ * a number of xfers equal to the maximum allowed in-flight
+ * messages.
+ * @pending_xfers: An hashtable, indexed by msg_hdr.seq, used to keep all the
+ * currently in-flight messages.
+ */
+struct scmi_xfers_info {
+ unsigned long *xfer_alloc_table;
+ spinlock_t xfer_lock;
+ int max_msg;
+ struct hlist_head free_xfers;
+ DECLARE_HASHTABLE(pending_xfers, SCMI_PENDING_XFERS_HT_ORDER_SZ);
+};
+
+/**
+ * struct scmi_protocol_instance - Describe an initialized protocol instance.
+ * @handle: Reference to the SCMI handle associated to this protocol instance.
+ * @proto: A reference to the protocol descriptor.
+ * @gid: A reference for per-protocol devres management.
+ * @users: A refcount to track effective users of this protocol.
+ * @priv: Reference for optional protocol private data.
+ * @ph: An embedded protocol handle that will be passed down to protocol
+ * initialization code to identify this instance.
+ *
+ * Each protocol is initialized independently once for each SCMI platform in
+ * which is defined by DT and implemented by the SCMI server fw.
+ */
+struct scmi_protocol_instance {
+ const struct scmi_handle *handle;
+ const struct scmi_protocol *proto;
+ void *gid;
+ refcount_t users;
+ void *priv;
+ struct scmi_protocol_handle ph;
+};
+
+#define ph_to_pi(h) container_of(h, struct scmi_protocol_instance, ph)
+
+/**
+ * struct scmi_info - Structure representing a SCMI instance
+ *
+ * @dev: Device pointer
+ * @desc: SoC description for this instance
+ * @version: SCMI revision information containing protocol version,
+ * implementation version and (sub-)vendor identification.
+ * @handle: Instance of SCMI handle to send to clients
+ * @tx_minfo: Universal Transmit Message management info
+ * @rx_minfo: Universal Receive Message management info
+ * @tx_idr: IDR object to map protocol id to Tx channel info pointer
+ * @rx_idr: IDR object to map protocol id to Rx channel info pointer
+ * @protocols: IDR for protocols' instance descriptors initialized for
+ * this SCMI instance: populated on protocol's first attempted
+ * usage.
+ * @protocols_mtx: A mutex to protect protocols instances initialization.
+ * @protocols_imp: List of protocols implemented, currently maximum of
+ * scmi_revision_info.num_protocols elements allocated by the
+ * base protocol
+ * @active_protocols: IDR storing device_nodes for protocols actually defined
+ * in the DT and confirmed as implemented by fw.
+ * @atomic_threshold: Optional system wide DT-configured threshold, expressed
+ * in microseconds, for atomic operations.
+ * Only SCMI synchronous commands reported by the platform
+ * to have an execution latency lesser-equal to the threshold
+ * should be considered for atomic mode operation: such
+ * decision is finally left up to the SCMI drivers.
+ * @notify_priv: Pointer to private data structure specific to notifications.
+ * @node: List head
+ * @users: Number of users of this instance
+ */
+struct scmi_info {
+ struct device *dev;
+ const struct scmi_desc *desc;
+ struct scmi_revision_info version;
+ struct scmi_handle handle;
+ struct scmi_xfers_info tx_minfo;
+ struct scmi_xfers_info rx_minfo;
+ struct idr tx_idr;
+ struct idr rx_idr;
+ struct idr protocols;
+ /* Ensure mutual exclusive access to protocols instance array */
+ struct mutex protocols_mtx;
+ u8 *protocols_imp;
+ struct idr active_protocols;
+ unsigned int atomic_threshold;
+ void *notify_priv;
+ struct list_head node;
+ int users;
+};
+
+#define handle_to_scmi_info(h) container_of(h, struct scmi_info, handle)
+
+static const int scmi_linux_errmap[] = {
+ /* better than switch case as long as return value is continuous */
+ 0, /* SCMI_SUCCESS */
+ -EOPNOTSUPP, /* SCMI_ERR_SUPPORT */
+ -EINVAL, /* SCMI_ERR_PARAM */
+ -EACCES, /* SCMI_ERR_ACCESS */
+ -ENOENT, /* SCMI_ERR_ENTRY */
+ -ERANGE, /* SCMI_ERR_RANGE */
+ -EBUSY, /* SCMI_ERR_BUSY */
+ -ECOMM, /* SCMI_ERR_COMMS */
+ -EIO, /* SCMI_ERR_GENERIC */
+ -EREMOTEIO, /* SCMI_ERR_HARDWARE */
+ -EPROTO, /* SCMI_ERR_PROTOCOL */
+};
+
+static inline int scmi_to_linux_errno(int errno)
+{
+ int err_idx = -errno;
+
+ if (err_idx >= SCMI_SUCCESS && err_idx < ARRAY_SIZE(scmi_linux_errmap))
+ return scmi_linux_errmap[err_idx];
+ return -EIO;
+}
+
+void scmi_notification_instance_data_set(const struct scmi_handle *handle,
+ void *priv)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ info->notify_priv = priv;
+ /* Ensure updated protocol private date are visible */
+ smp_wmb();
+}
+
+void *scmi_notification_instance_data_get(const struct scmi_handle *handle)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ /* Ensure protocols_private_data has been updated */
+ smp_rmb();
+ return info->notify_priv;
+}
+
+/**
+ * scmi_xfer_token_set - Reserve and set new token for the xfer at hand
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: The xfer to act upon
+ *
+ * Pick the next unused monotonically increasing token and set it into
+ * xfer->hdr.seq: picking a monotonically increasing value avoids immediate
+ * reuse of freshly completed or timed-out xfers, thus mitigating the risk
+ * of incorrect association of a late and expired xfer with a live in-flight
+ * transaction, both happening to re-use the same token identifier.
+ *
+ * Since platform is NOT required to answer our request in-order we should
+ * account for a few rare but possible scenarios:
+ *
+ * - exactly 'next_token' may be NOT available so pick xfer_id >= next_token
+ * using find_next_zero_bit() starting from candidate next_token bit
+ *
+ * - all tokens ahead upto (MSG_TOKEN_ID_MASK - 1) are used in-flight but we
+ * are plenty of free tokens at start, so try a second pass using
+ * find_next_zero_bit() and starting from 0.
+ *
+ * X = used in-flight
+ *
+ * Normal
+ * ------
+ *
+ * |- xfer_id picked
+ * -----------+----------------------------------------------------------
+ * | | |X|X|X| | | | | | ... ... ... ... ... ... ... ... ... ... ...|X|X|
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ * Out-of-order pending at start
+ * -----------------------------
+ *
+ * |- xfer_id picked, last_token fixed
+ * -----+----------------------------------------------------------------
+ * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... ... ...|X| |
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ *
+ * Out-of-order pending at end
+ * ---------------------------
+ *
+ * |- xfer_id picked, last_token fixed
+ * -----+----------------------------------------------------------------
+ * |X|X| | | | |X|X| ... ... ... ... ... ... ... ... ... ... |X|X|X||X|X|
+ * ----------------------------------------------------------------------
+ * ^
+ * |- next_token
+ *
+ * Context: Assumes to be called with @xfer_lock already acquired.
+ *
+ * Return: 0 on Success or error
+ */
+static int scmi_xfer_token_set(struct scmi_xfers_info *minfo,
+ struct scmi_xfer *xfer)
+{
+ unsigned long xfer_id, next_token;
+
+ /*
+ * Pick a candidate monotonic token in range [0, MSG_TOKEN_MAX - 1]
+ * using the pre-allocated transfer_id as a base.
+ * Note that the global transfer_id is shared across all message types
+ * so there could be holes in the allocated set of monotonic sequence
+ * numbers, but that is going to limit the effectiveness of the
+ * mitigation only in very rare limit conditions.
+ */
+ next_token = (xfer->transfer_id & (MSG_TOKEN_MAX - 1));
+
+ /* Pick the next available xfer_id >= next_token */
+ xfer_id = find_next_zero_bit(minfo->xfer_alloc_table,
+ MSG_TOKEN_MAX, next_token);
+ if (xfer_id == MSG_TOKEN_MAX) {
+ /*
+ * After heavily out-of-order responses, there are no free
+ * tokens ahead, but only at start of xfer_alloc_table so
+ * try again from the beginning.
+ */
+ xfer_id = find_next_zero_bit(minfo->xfer_alloc_table,
+ MSG_TOKEN_MAX, 0);
+ /*
+ * Something is wrong if we got here since there can be a
+ * maximum number of (MSG_TOKEN_MAX - 1) in-flight messages
+ * but we have not found any free token [0, MSG_TOKEN_MAX - 1].
+ */
+ if (WARN_ON_ONCE(xfer_id == MSG_TOKEN_MAX))
+ return -ENOMEM;
+ }
+
+ /* Update +/- last_token accordingly if we skipped some hole */
+ if (xfer_id != next_token)
+ atomic_add((int)(xfer_id - next_token), &transfer_last_id);
+
+ /* Set in-flight */
+ set_bit(xfer_id, minfo->xfer_alloc_table);
+ xfer->hdr.seq = (u16)xfer_id;
+
+ return 0;
+}
+
+/**
+ * scmi_xfer_token_clear - Release the token
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: The xfer to act upon
+ */
+static inline void scmi_xfer_token_clear(struct scmi_xfers_info *minfo,
+ struct scmi_xfer *xfer)
+{
+ clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
+}
+
+/**
+ * scmi_xfer_get() - Allocate one message
+ *
+ * @handle: Pointer to SCMI entity handle
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @set_pending: If true a monotonic token is picked and the xfer is added to
+ * the pending hash table.
+ *
+ * Helper function which is used by various message functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * Picks an xfer from the free list @free_xfers (if any available) and, if
+ * required, sets a monotonically increasing token and stores the inflight xfer
+ * into the @pending_xfers hashtable for later retrieval.
+ *
+ * The successfully initialized xfer is refcounted.
+ *
+ * Context: Holds @xfer_lock while manipulating @xfer_alloc_table and
+ * @free_xfers.
+ *
+ * Return: 0 if all went fine, else corresponding error.
+ */
+static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
+ struct scmi_xfers_info *minfo,
+ bool set_pending)
+{
+ int ret;
+ unsigned long flags;
+ struct scmi_xfer *xfer;
+
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ if (hlist_empty(&minfo->free_xfers)) {
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* grab an xfer from the free_list */
+ xfer = hlist_entry(minfo->free_xfers.first, struct scmi_xfer, node);
+ hlist_del_init(&xfer->node);
+
+ /*
+ * Allocate transfer_id early so that can be used also as base for
+ * monotonic sequence number generation if needed.
+ */
+ xfer->transfer_id = atomic_inc_return(&transfer_last_id);
+
+ if (set_pending) {
+ /* Pick and set monotonic token */
+ ret = scmi_xfer_token_set(minfo, xfer);
+ if (!ret) {
+ hash_add(minfo->pending_xfers, &xfer->node,
+ xfer->hdr.seq);
+ xfer->pending = true;
+ } else {
+ dev_err(handle->dev,
+ "Failed to get monotonic token %d\n", ret);
+ hlist_add_head(&xfer->node, &minfo->free_xfers);
+ xfer = ERR_PTR(ret);
+ }
+ }
+
+ if (!IS_ERR(xfer)) {
+ refcount_set(&xfer->users, 1);
+ atomic_set(&xfer->busy, SCMI_XFER_FREE);
+ }
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ return xfer;
+}
+
+/**
+ * __scmi_xfer_put() - Release a message
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer: message that was reserved by scmi_xfer_get
+ *
+ * After refcount check, possibly release an xfer, clearing the token slot,
+ * removing xfer from @pending_xfers and putting it back into free_xfers.
+ *
+ * This holds a spinlock to maintain integrity of internal data structures.
+ */
+static void
+__scmi_xfer_put(struct scmi_xfers_info *minfo, struct scmi_xfer *xfer)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ if (refcount_dec_and_test(&xfer->users)) {
+ if (xfer->pending) {
+ scmi_xfer_token_clear(minfo, xfer);
+ hash_del(&xfer->node);
+ xfer->pending = false;
+ }
+ hlist_add_head(&xfer->node, &minfo->free_xfers);
+ }
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+}
+
+/**
+ * scmi_xfer_lookup_unlocked - Helper to lookup an xfer_id
+ *
+ * @minfo: Pointer to Tx/Rx Message management info based on channel type
+ * @xfer_id: Token ID to lookup in @pending_xfers
+ *
+ * Refcounting is untouched.
+ *
+ * Context: Assumes to be called with @xfer_lock already acquired.
+ *
+ * Return: A valid xfer on Success or error otherwise
+ */
+static struct scmi_xfer *
+scmi_xfer_lookup_unlocked(struct scmi_xfers_info *minfo, u16 xfer_id)
+{
+ struct scmi_xfer *xfer = NULL;
+
+ if (test_bit(xfer_id, minfo->xfer_alloc_table))
+ xfer = XFER_FIND(minfo->pending_xfers, xfer_id);
+
+ return xfer ?: ERR_PTR(-EINVAL);
+}
+
+/**
+ * scmi_msg_response_validate - Validate message type against state of related
+ * xfer
+ *
+ * @cinfo: A reference to the channel descriptor.
+ * @msg_type: Message type to check
+ * @xfer: A reference to the xfer to validate against @msg_type
+ *
+ * This function checks if @msg_type is congruent with the current state of
+ * a pending @xfer; if an asynchronous delayed response is received before the
+ * related synchronous response (Out-of-Order Delayed Response) the missing
+ * synchronous response is assumed to be OK and completed, carrying on with the
+ * Delayed Response: this is done to address the case in which the underlying
+ * SCMI transport can deliver such out-of-order responses.
+ *
+ * Context: Assumes to be called with xfer->lock already acquired.
+ *
+ * Return: 0 on Success, error otherwise
+ */
+static inline int scmi_msg_response_validate(struct scmi_chan_info *cinfo,
+ u8 msg_type,
+ struct scmi_xfer *xfer)
+{
+ /*
+ * Even if a response was indeed expected on this slot at this point,
+ * a buggy platform could wrongly reply feeding us an unexpected
+ * delayed response we're not prepared to handle: bail-out safely
+ * blaming firmware.
+ */
+ if (msg_type == MSG_TYPE_DELAYED_RESP && !xfer->async_done) {
+ dev_err(cinfo->dev,
+ "Delayed Response for %d not expected! Buggy F/W ?\n",
+ xfer->hdr.seq);
+ return -EINVAL;
+ }
+
+ switch (xfer->state) {
+ case SCMI_XFER_SENT_OK:
+ if (msg_type == MSG_TYPE_DELAYED_RESP) {
+ /*
+ * Delayed Response expected but delivered earlier.
+ * Assume message RESPONSE was OK and skip state.
+ */
+ xfer->hdr.status = SCMI_SUCCESS;
+ xfer->state = SCMI_XFER_RESP_OK;
+ complete(&xfer->done);
+ dev_warn(cinfo->dev,
+ "Received valid OoO Delayed Response for %d\n",
+ xfer->hdr.seq);
+ }
+ break;
+ case SCMI_XFER_RESP_OK:
+ if (msg_type != MSG_TYPE_DELAYED_RESP)
+ return -EINVAL;
+ break;
+ case SCMI_XFER_DRESP_OK:
+ /* No further message expected once in SCMI_XFER_DRESP_OK */
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * scmi_xfer_state_update - Update xfer state
+ *
+ * @xfer: A reference to the xfer to update
+ * @msg_type: Type of message being processed.
+ *
+ * Note that this message is assumed to have been already successfully validated
+ * by @scmi_msg_response_validate(), so here we just update the state.
+ *
+ * Context: Assumes to be called on an xfer exclusively acquired using the
+ * busy flag.
+ */
+static inline void scmi_xfer_state_update(struct scmi_xfer *xfer, u8 msg_type)
+{
+ xfer->hdr.type = msg_type;
+
+ /* Unknown command types were already discarded earlier */
+ if (xfer->hdr.type == MSG_TYPE_COMMAND)
+ xfer->state = SCMI_XFER_RESP_OK;
+ else
+ xfer->state = SCMI_XFER_DRESP_OK;
+}
+
+static bool scmi_xfer_acquired(struct scmi_xfer *xfer)
+{
+ int ret;
+
+ ret = atomic_cmpxchg(&xfer->busy, SCMI_XFER_FREE, SCMI_XFER_BUSY);
+
+ return ret == SCMI_XFER_FREE;
+}
+
+/**
+ * scmi_xfer_command_acquire - Helper to lookup and acquire a command xfer
+ *
+ * @cinfo: A reference to the channel descriptor.
+ * @msg_hdr: A message header to use as lookup key
+ *
+ * When a valid xfer is found for the sequence number embedded in the provided
+ * msg_hdr, reference counting is properly updated and exclusive access to this
+ * xfer is granted till released with @scmi_xfer_command_release.
+ *
+ * Return: A valid @xfer on Success or error otherwise.
+ */
+static inline struct scmi_xfer *
+scmi_xfer_command_acquire(struct scmi_chan_info *cinfo, u32 msg_hdr)
+{
+ int ret;
+ unsigned long flags;
+ struct scmi_xfer *xfer;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct scmi_xfers_info *minfo = &info->tx_minfo;
+ u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+ u16 xfer_id = MSG_XTRACT_TOKEN(msg_hdr);
+
+ /* Are we even expecting this? */
+ spin_lock_irqsave(&minfo->xfer_lock, flags);
+ xfer = scmi_xfer_lookup_unlocked(minfo, xfer_id);
+ if (IS_ERR(xfer)) {
+ dev_err(cinfo->dev,
+ "Message for %d type %d is not expected!\n",
+ xfer_id, msg_type);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+ return xfer;
+ }
+ refcount_inc(&xfer->users);
+ spin_unlock_irqrestore(&minfo->xfer_lock, flags);
+
+ spin_lock_irqsave(&xfer->lock, flags);
+ ret = scmi_msg_response_validate(cinfo, msg_type, xfer);
+ /*
+ * If a pending xfer was found which was also in a congruent state with
+ * the received message, acquire exclusive access to it setting the busy
+ * flag.
+ * Spins only on the rare limit condition of concurrent reception of
+ * RESP and DRESP for the same xfer.
+ */
+ if (!ret) {
+ spin_until_cond(scmi_xfer_acquired(xfer));
+ scmi_xfer_state_update(xfer, msg_type);
+ }
+ spin_unlock_irqrestore(&xfer->lock, flags);
+
+ if (ret) {
+ dev_err(cinfo->dev,
+ "Invalid message type:%d for %d - HDR:0x%X state:%d\n",
+ msg_type, xfer_id, msg_hdr, xfer->state);
+ /* On error the refcount incremented above has to be dropped */
+ __scmi_xfer_put(minfo, xfer);
+ xfer = ERR_PTR(-EINVAL);
+ }
+
+ return xfer;
+}
+
+static inline void scmi_xfer_command_release(struct scmi_info *info,
+ struct scmi_xfer *xfer)
+{
+ atomic_set(&xfer->busy, SCMI_XFER_FREE);
+ __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
+static inline void scmi_clear_channel(struct scmi_info *info,
+ struct scmi_chan_info *cinfo)
+{
+ if (info->desc->ops->clear_channel)
+ info->desc->ops->clear_channel(cinfo);
+}
+
+static inline bool is_polling_required(struct scmi_chan_info *cinfo,
+ struct scmi_info *info)
+{
+ return cinfo->no_completion_irq || info->desc->force_polling;
+}
+
+static inline bool is_transport_polling_capable(struct scmi_info *info)
+{
+ return info->desc->ops->poll_done ||
+ info->desc->sync_cmds_completed_on_ret;
+}
+
+static inline bool is_polling_enabled(struct scmi_chan_info *cinfo,
+ struct scmi_info *info)
+{
+ return is_polling_required(cinfo, info) &&
+ is_transport_polling_capable(info);
+}
+
+static void scmi_handle_notification(struct scmi_chan_info *cinfo,
+ u32 msg_hdr, void *priv)
+{
+ struct scmi_xfer *xfer;
+ struct device *dev = cinfo->dev;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct scmi_xfers_info *minfo = &info->rx_minfo;
+ ktime_t ts;
+
+ ts = ktime_get_boottime();
+ xfer = scmi_xfer_get(cinfo->handle, minfo, false);
+ if (IS_ERR(xfer)) {
+ dev_err(dev, "failed to get free message slot (%ld)\n",
+ PTR_ERR(xfer));
+ scmi_clear_channel(info, cinfo);
+ return;
+ }
+
+ unpack_scmi_header(msg_hdr, &xfer->hdr);
+ if (priv)
+ /* Ensure order between xfer->priv store and following ops */
+ smp_store_mb(xfer->priv, priv);
+ info->desc->ops->fetch_notification(cinfo, info->desc->max_msg_size,
+ xfer);
+
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "NOTI",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
+
+ scmi_notify(cinfo->handle, xfer->hdr.protocol_id,
+ xfer->hdr.id, xfer->rx.buf, xfer->rx.len, ts);
+
+ trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ MSG_TYPE_NOTIFICATION);
+
+ __scmi_xfer_put(minfo, xfer);
+
+ scmi_clear_channel(info, cinfo);
+}
+
+static void scmi_handle_response(struct scmi_chan_info *cinfo,
+ u32 msg_hdr, void *priv)
+{
+ struct scmi_xfer *xfer;
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+
+ xfer = scmi_xfer_command_acquire(cinfo, msg_hdr);
+ if (IS_ERR(xfer)) {
+ if (MSG_XTRACT_TYPE(msg_hdr) == MSG_TYPE_DELAYED_RESP)
+ scmi_clear_channel(info, cinfo);
+ return;
+ }
+
+ /* rx.len could be shrunk in the sync do_xfer, so reset to maxsz */
+ if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP)
+ xfer->rx.len = info->desc->max_msg_size;
+
+ if (priv)
+ /* Ensure order between xfer->priv store and following ops */
+ smp_store_mb(xfer->priv, priv);
+ info->desc->ops->fetch_response(cinfo, xfer);
+
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
+ xfer->hdr.type == MSG_TYPE_DELAYED_RESP ?
+ "DLYD" : "RESP",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
+
+ trace_scmi_rx_done(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ xfer->hdr.type);
+
+ if (xfer->hdr.type == MSG_TYPE_DELAYED_RESP) {
+ scmi_clear_channel(info, cinfo);
+ complete(xfer->async_done);
+ } else {
+ complete(&xfer->done);
+ }
+
+ scmi_xfer_command_release(info, xfer);
+}
+
+/**
+ * scmi_rx_callback() - callback for receiving messages
+ *
+ * @cinfo: SCMI channel info
+ * @msg_hdr: Message header
+ * @priv: Transport specific private data.
+ *
+ * Processes one received message to appropriate transfer information and
+ * signals completion of the transfer.
+ *
+ * NOTE: This function will be invoked in IRQ context, hence should be
+ * as optimal as possible.
+ */
+void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr, void *priv)
+{
+ u8 msg_type = MSG_XTRACT_TYPE(msg_hdr);
+
+ switch (msg_type) {
+ case MSG_TYPE_NOTIFICATION:
+ scmi_handle_notification(cinfo, msg_hdr, priv);
+ break;
+ case MSG_TYPE_COMMAND:
+ case MSG_TYPE_DELAYED_RESP:
+ scmi_handle_response(cinfo, msg_hdr, priv);
+ break;
+ default:
+ WARN_ONCE(1, "received unknown msg_type:%d\n", msg_type);
+ break;
+ }
+}
+
+/**
+ * xfer_put() - Release a transmit message
+ *
+ * @ph: Pointer to SCMI protocol handle
+ * @xfer: message that was reserved by xfer_get_init
+ */
+static void xfer_put(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+ struct scmi_info *info = handle_to_scmi_info(pi->handle);
+
+ __scmi_xfer_put(&info->tx_minfo, xfer);
+}
+
+static bool scmi_xfer_done_no_timeout(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer, ktime_t stop)
+{
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+
+ /*
+ * Poll also on xfer->done so that polling can be forcibly terminated
+ * in case of out-of-order receptions of delayed responses
+ */
+ return info->desc->ops->poll_done(cinfo, xfer) ||
+ try_wait_for_completion(&xfer->done) ||
+ ktime_after(ktime_get(), stop);
+}
+
+/**
+ * scmi_wait_for_message_response - An helper to group all the possible ways of
+ * waiting for a synchronous message response.
+ *
+ * @cinfo: SCMI channel info
+ * @xfer: Reference to the transfer being waited for.
+ *
+ * Chooses waiting strategy (sleep-waiting vs busy-waiting) depending on
+ * configuration flags like xfer->hdr.poll_completion.
+ *
+ * Return: 0 on Success, error otherwise.
+ */
+static int scmi_wait_for_message_response(struct scmi_chan_info *cinfo,
+ struct scmi_xfer *xfer)
+{
+ struct scmi_info *info = handle_to_scmi_info(cinfo->handle);
+ struct device *dev = info->dev;
+ int ret = 0, timeout_ms = info->desc->max_rx_timeout_ms;
+
+ trace_scmi_xfer_response_wait(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ timeout_ms,
+ xfer->hdr.poll_completion);
+
+ if (xfer->hdr.poll_completion) {
+ /*
+ * Real polling is needed only if transport has NOT declared
+ * itself to support synchronous commands replies.
+ */
+ if (!info->desc->sync_cmds_completed_on_ret) {
+ /*
+ * Poll on xfer using transport provided .poll_done();
+ * assumes no completion interrupt was available.
+ */
+ ktime_t stop = ktime_add_ms(ktime_get(), timeout_ms);
+
+ spin_until_cond(scmi_xfer_done_no_timeout(cinfo,
+ xfer, stop));
+ if (ktime_after(ktime_get(), stop)) {
+ dev_err(dev,
+ "timed out in resp(caller: %pS) - polling\n",
+ (void *)_RET_IP_);
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ if (!ret) {
+ unsigned long flags;
+
+ /*
+ * Do not fetch_response if an out-of-order delayed
+ * response is being processed.
+ */
+ spin_lock_irqsave(&xfer->lock, flags);
+ if (xfer->state == SCMI_XFER_SENT_OK) {
+ info->desc->ops->fetch_response(cinfo, xfer);
+ xfer->state = SCMI_XFER_RESP_OK;
+ }
+ spin_unlock_irqrestore(&xfer->lock, flags);
+
+ /* Trace polled replies. */
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id,
+ "RESP",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->rx.buf, xfer->rx.len);
+ }
+ } else {
+ /* And we wait for the response. */
+ if (!wait_for_completion_timeout(&xfer->done,
+ msecs_to_jiffies(timeout_ms))) {
+ dev_err(dev, "timed out in resp(caller: %pS)\n",
+ (void *)_RET_IP_);
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * do_xfer() - Do one transfer
+ *
+ * @ph: Pointer to SCMI protocol handle
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Return: -ETIMEDOUT in case of no response, if transmit error,
+ * return corresponding error, else if all goes well,
+ * return 0.
+ */
+static int do_xfer(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer)
+{
+ int ret;
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+ struct scmi_info *info = handle_to_scmi_info(pi->handle);
+ struct device *dev = info->dev;
+ struct scmi_chan_info *cinfo;
+
+ /* Check for polling request on custom command xfers at first */
+ if (xfer->hdr.poll_completion && !is_transport_polling_capable(info)) {
+ dev_warn_once(dev,
+ "Polling mode is not supported by transport.\n");
+ return -EINVAL;
+ }
+
+ cinfo = idr_find(&info->tx_idr, pi->proto->id);
+ if (unlikely(!cinfo))
+ return -EINVAL;
+
+ /* True ONLY if also supported by transport. */
+ if (is_polling_enabled(cinfo, info))
+ xfer->hdr.poll_completion = true;
+
+ /*
+ * Initialise protocol id now from protocol handle to avoid it being
+ * overridden by mistake (or malice) by the protocol code mangling with
+ * the scmi_xfer structure prior to this.
+ */
+ xfer->hdr.protocol_id = pi->proto->id;
+ reinit_completion(&xfer->done);
+
+ trace_scmi_xfer_begin(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq,
+ xfer->hdr.poll_completion);
+
+ /* Clear any stale status */
+ xfer->hdr.status = SCMI_SUCCESS;
+ xfer->state = SCMI_XFER_SENT_OK;
+ /*
+ * Even though spinlocking is not needed here since no race is possible
+ * on xfer->state due to the monotonically increasing tokens allocation,
+ * we must anyway ensure xfer->state initialization is not re-ordered
+ * after the .send_message() to be sure that on the RX path an early
+ * ISR calling scmi_rx_callback() cannot see an old stale xfer->state.
+ */
+ smp_mb();
+
+ ret = info->desc->ops->send_message(cinfo, xfer);
+ if (ret < 0) {
+ dev_dbg(dev, "Failed to send message %d\n", ret);
+ return ret;
+ }
+
+ trace_scmi_msg_dump(xfer->hdr.protocol_id, xfer->hdr.id, "CMND",
+ xfer->hdr.seq, xfer->hdr.status,
+ xfer->tx.buf, xfer->tx.len);
+
+ ret = scmi_wait_for_message_response(cinfo, xfer);
+ if (!ret && xfer->hdr.status)
+ ret = scmi_to_linux_errno(xfer->hdr.status);
+
+ if (info->desc->ops->mark_txdone)
+ info->desc->ops->mark_txdone(cinfo, ret, xfer);
+
+ trace_scmi_xfer_end(xfer->transfer_id, xfer->hdr.id,
+ xfer->hdr.protocol_id, xfer->hdr.seq, ret);
+
+ return ret;
+}
+
+static void reset_rx_to_maxsz(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+ struct scmi_info *info = handle_to_scmi_info(pi->handle);
+
+ xfer->rx.len = info->desc->max_msg_size;
+}
+
+#define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC)
+
+/**
+ * do_xfer_with_response() - Do one transfer and wait until the delayed
+ * response is received
+ *
+ * @ph: Pointer to SCMI protocol handle
+ * @xfer: Transfer to initiate and wait for response
+ *
+ * Using asynchronous commands in atomic/polling mode should be avoided since
+ * it could cause long busy-waiting here, so ignore polling for the delayed
+ * response and WARN if it was requested for this command transaction since
+ * upper layers should refrain from issuing such kind of requests.
+ *
+ * The only other option would have been to refrain from using any asynchronous
+ * command even if made available, when an atomic transport is detected, and
+ * instead forcibly use the synchronous version (thing that can be easily
+ * attained at the protocol layer), but this would also have led to longer
+ * stalls of the channel for synchronous commands and possibly timeouts.
+ * (in other words there is usually a good reason if a platform provides an
+ * asynchronous version of a command and we should prefer to use it...just not
+ * when using atomic/polling mode)
+ *
+ * Return: -ETIMEDOUT in case of no delayed response, if transmit error,
+ * return corresponding error, else if all goes well, return 0.
+ */
+static int do_xfer_with_response(const struct scmi_protocol_handle *ph,
+ struct scmi_xfer *xfer)
+{
+ int ret, timeout = msecs_to_jiffies(SCMI_MAX_RESPONSE_TIMEOUT);
+ DECLARE_COMPLETION_ONSTACK(async_response);
+
+ xfer->async_done = &async_response;
+
+ /*
+ * Delayed responses should not be polled, so an async command should
+ * not have been used when requiring an atomic/poll context; WARN and
+ * perform instead a sleeping wait.
+ * (Note Async + IgnoreDelayedResponses are sent via do_xfer)
+ */
+ WARN_ON_ONCE(xfer->hdr.poll_completion);
+
+ ret = do_xfer(ph, xfer);
+ if (!ret) {
+ if (!wait_for_completion_timeout(xfer->async_done, timeout)) {
+ dev_err(ph->dev,
+ "timed out in delayed resp(caller: %pS)\n",
+ (void *)_RET_IP_);
+ ret = -ETIMEDOUT;
+ } else if (xfer->hdr.status) {
+ ret = scmi_to_linux_errno(xfer->hdr.status);
+ }
+ }
+
+ xfer->async_done = NULL;
+ return ret;
+}
+
+/**
+ * xfer_get_init() - Allocate and initialise one message for transmit
+ *
+ * @ph: Pointer to SCMI protocol handle
+ * @msg_id: Message identifier
+ * @tx_size: transmit message size
+ * @rx_size: receive message size
+ * @p: pointer to the allocated and initialised message
+ *
+ * This function allocates the message using @scmi_xfer_get and
+ * initialise the header.
+ *
+ * Return: 0 if all went fine with @p pointing to message, else
+ * corresponding error.
+ */
+static int xfer_get_init(const struct scmi_protocol_handle *ph,
+ u8 msg_id, size_t tx_size, size_t rx_size,
+ struct scmi_xfer **p)
+{
+ int ret;
+ struct scmi_xfer *xfer;
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+ struct scmi_info *info = handle_to_scmi_info(pi->handle);
+ struct scmi_xfers_info *minfo = &info->tx_minfo;
+ struct device *dev = info->dev;
+
+ /* Ensure we have sane transfer sizes */
+ if (rx_size > info->desc->max_msg_size ||
+ tx_size > info->desc->max_msg_size)
+ return -ERANGE;
+
+ xfer = scmi_xfer_get(pi->handle, minfo, true);
+ if (IS_ERR(xfer)) {
+ ret = PTR_ERR(xfer);
+ dev_err(dev, "failed to get free message slot(%d)\n", ret);
+ return ret;
+ }
+
+ xfer->tx.len = tx_size;
+ xfer->rx.len = rx_size ? : info->desc->max_msg_size;
+ xfer->hdr.type = MSG_TYPE_COMMAND;
+ xfer->hdr.id = msg_id;
+ xfer->hdr.poll_completion = false;
+
+ *p = xfer;
+
+ return 0;
+}
+
+/**
+ * version_get() - command to get the revision of the SCMI entity
+ *
+ * @ph: Pointer to SCMI protocol handle
+ * @version: Holds returned version of protocol.
+ *
+ * Updates the SCMI information in the internal data structure.
+ *
+ * Return: 0 if all went fine, else return appropriate error.
+ */
+static int version_get(const struct scmi_protocol_handle *ph, u32 *version)
+{
+ int ret;
+ __le32 *rev_info;
+ struct scmi_xfer *t;
+
+ ret = xfer_get_init(ph, PROTOCOL_VERSION, 0, sizeof(*version), &t);
+ if (ret)
+ return ret;
+
+ ret = do_xfer(ph, t);
+ if (!ret) {
+ rev_info = t->rx.buf;
+ *version = le32_to_cpu(*rev_info);
+ }
+
+ xfer_put(ph, t);
+ return ret;
+}
+
+/**
+ * scmi_set_protocol_priv - Set protocol specific data at init time
+ *
+ * @ph: A reference to the protocol handle.
+ * @priv: The private data to set.
+ *
+ * Return: 0 on Success
+ */
+static int scmi_set_protocol_priv(const struct scmi_protocol_handle *ph,
+ void *priv)
+{
+ struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ pi->priv = priv;
+
+ return 0;
+}
+
+/**
+ * scmi_get_protocol_priv - Set protocol specific data at init time
+ *
+ * @ph: A reference to the protocol handle.
+ *
+ * Return: Protocol private data if any was set.
+ */
+static void *scmi_get_protocol_priv(const struct scmi_protocol_handle *ph)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ return pi->priv;
+}
+
+static const struct scmi_xfer_ops xfer_ops = {
+ .version_get = version_get,
+ .xfer_get_init = xfer_get_init,
+ .reset_rx_to_maxsz = reset_rx_to_maxsz,
+ .do_xfer = do_xfer,
+ .do_xfer_with_response = do_xfer_with_response,
+ .xfer_put = xfer_put,
+};
+
+struct scmi_msg_resp_domain_name_get {
+ __le32 flags;
+ u8 name[SCMI_MAX_STR_SIZE];
+};
+
+/**
+ * scmi_common_extended_name_get - Common helper to get extended resources name
+ * @ph: A protocol handle reference.
+ * @cmd_id: The specific command ID to use.
+ * @res_id: The specific resource ID to use.
+ * @name: A pointer to the preallocated area where the retrieved name will be
+ * stored as a NULL terminated string.
+ * @len: The len in bytes of the @name char array.
+ *
+ * Return: 0 on Succcess
+ */
+static int scmi_common_extended_name_get(const struct scmi_protocol_handle *ph,
+ u8 cmd_id, u32 res_id, char *name,
+ size_t len)
+{
+ int ret;
+ struct scmi_xfer *t;
+ struct scmi_msg_resp_domain_name_get *resp;
+
+ ret = ph->xops->xfer_get_init(ph, cmd_id, sizeof(res_id),
+ sizeof(*resp), &t);
+ if (ret)
+ goto out;
+
+ put_unaligned_le32(res_id, t->tx.buf);
+ resp = t->rx.buf;
+
+ ret = ph->xops->do_xfer(ph, t);
+ if (!ret)
+ strscpy(name, resp->name, len);
+
+ ph->xops->xfer_put(ph, t);
+out:
+ if (ret)
+ dev_warn(ph->dev,
+ "Failed to get extended name - id:%u (ret:%d). Using %s\n",
+ res_id, ret, name);
+ return ret;
+}
+
+/**
+ * struct scmi_iterator - Iterator descriptor
+ * @msg: A reference to the message TX buffer; filled by @prepare_message with
+ * a proper custom command payload for each multi-part command request.
+ * @resp: A reference to the response RX buffer; used by @update_state and
+ * @process_response to parse the multi-part replies.
+ * @t: A reference to the underlying xfer initialized and used transparently by
+ * the iterator internal routines.
+ * @ph: A reference to the associated protocol handle to be used.
+ * @ops: A reference to the custom provided iterator operations.
+ * @state: The current iterator state; used and updated in turn by the iterators
+ * internal routines and by the caller-provided @scmi_iterator_ops.
+ * @priv: A reference to optional private data as provided by the caller and
+ * passed back to the @@scmi_iterator_ops.
+ */
+struct scmi_iterator {
+ void *msg;
+ void *resp;
+ struct scmi_xfer *t;
+ const struct scmi_protocol_handle *ph;
+ struct scmi_iterator_ops *ops;
+ struct scmi_iterator_state state;
+ void *priv;
+};
+
+static void *scmi_iterator_init(const struct scmi_protocol_handle *ph,
+ struct scmi_iterator_ops *ops,
+ unsigned int max_resources, u8 msg_id,
+ size_t tx_size, void *priv)
+{
+ int ret;
+ struct scmi_iterator *i;
+
+ i = devm_kzalloc(ph->dev, sizeof(*i), GFP_KERNEL);
+ if (!i)
+ return ERR_PTR(-ENOMEM);
+
+ i->ph = ph;
+ i->ops = ops;
+ i->priv = priv;
+
+ ret = ph->xops->xfer_get_init(ph, msg_id, tx_size, 0, &i->t);
+ if (ret) {
+ devm_kfree(ph->dev, i);
+ return ERR_PTR(ret);
+ }
+
+ i->state.max_resources = max_resources;
+ i->msg = i->t->tx.buf;
+ i->resp = i->t->rx.buf;
+
+ return i;
+}
+
+static int scmi_iterator_run(void *iter)
+{
+ int ret = -EINVAL;
+ struct scmi_iterator_ops *iops;
+ const struct scmi_protocol_handle *ph;
+ struct scmi_iterator_state *st;
+ struct scmi_iterator *i = iter;
+
+ if (!i || !i->ops || !i->ph)
+ return ret;
+
+ iops = i->ops;
+ ph = i->ph;
+ st = &i->state;
+
+ do {
+ iops->prepare_message(i->msg, st->desc_index, i->priv);
+ ret = ph->xops->do_xfer(ph, i->t);
+ if (ret)
+ break;
+
+ st->rx_len = i->t->rx.len;
+ ret = iops->update_state(st, i->resp, i->priv);
+ if (ret)
+ break;
+
+ if (st->num_returned > st->max_resources - st->desc_index) {
+ dev_err(ph->dev,
+ "No. of resources can't exceed %d\n",
+ st->max_resources);
+ ret = -EINVAL;
+ break;
+ }
+
+ for (st->loop_idx = 0; st->loop_idx < st->num_returned;
+ st->loop_idx++) {
+ ret = iops->process_response(ph, i->resp, st, i->priv);
+ if (ret)
+ goto out;
+ }
+
+ st->desc_index += st->num_returned;
+ ph->xops->reset_rx_to_maxsz(ph, i->t);
+ /*
+ * check for both returned and remaining to avoid infinite
+ * loop due to buggy firmware
+ */
+ } while (st->num_returned && st->num_remaining);
+
+out:
+ /* Finalize and destroy iterator */
+ ph->xops->xfer_put(ph, i->t);
+ devm_kfree(ph->dev, i);
+
+ return ret;
+}
+
+struct scmi_msg_get_fc_info {
+ __le32 domain;
+ __le32 message_id;
+};
+
+struct scmi_msg_resp_desc_fc {
+ __le32 attr;
+#define SUPPORTS_DOORBELL(x) ((x) & BIT(0))
+#define DOORBELL_REG_WIDTH(x) FIELD_GET(GENMASK(2, 1), (x))
+ __le32 rate_limit;
+ __le32 chan_addr_low;
+ __le32 chan_addr_high;
+ __le32 chan_size;
+ __le32 db_addr_low;
+ __le32 db_addr_high;
+ __le32 db_set_lmask;
+ __le32 db_set_hmask;
+ __le32 db_preserve_lmask;
+ __le32 db_preserve_hmask;
+};
+
+static void
+scmi_common_fastchannel_init(const struct scmi_protocol_handle *ph,
+ u8 describe_id, u32 message_id, u32 valid_size,
+ u32 domain, void __iomem **p_addr,
+ struct scmi_fc_db_info **p_db)
+{
+ int ret;
+ u32 flags;
+ u64 phys_addr;
+ u8 size;
+ void __iomem *addr;
+ struct scmi_xfer *t;
+ struct scmi_fc_db_info *db = NULL;
+ struct scmi_msg_get_fc_info *info;
+ struct scmi_msg_resp_desc_fc *resp;
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ if (!p_addr) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ ret = ph->xops->xfer_get_init(ph, describe_id,
+ sizeof(*info), sizeof(*resp), &t);
+ if (ret)
+ goto err_out;
+
+ info = t->tx.buf;
+ info->domain = cpu_to_le32(domain);
+ info->message_id = cpu_to_le32(message_id);
+
+ /*
+ * Bail out on error leaving fc_info addresses zeroed; this includes
+ * the case in which the requested domain/message_id does NOT support
+ * fastchannels at all.
+ */
+ ret = ph->xops->do_xfer(ph, t);
+ if (ret)
+ goto err_xfer;
+
+ resp = t->rx.buf;
+ flags = le32_to_cpu(resp->attr);
+ size = le32_to_cpu(resp->chan_size);
+ if (size != valid_size) {
+ ret = -EINVAL;
+ goto err_xfer;
+ }
+
+ phys_addr = le32_to_cpu(resp->chan_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->chan_addr_high) << 32;
+ addr = devm_ioremap(ph->dev, phys_addr, size);
+ if (!addr) {
+ ret = -EADDRNOTAVAIL;
+ goto err_xfer;
+ }
+
+ *p_addr = addr;
+
+ if (p_db && SUPPORTS_DOORBELL(flags)) {
+ db = devm_kzalloc(ph->dev, sizeof(*db), GFP_KERNEL);
+ if (!db) {
+ ret = -ENOMEM;
+ goto err_db;
+ }
+
+ size = 1 << DOORBELL_REG_WIDTH(flags);
+ phys_addr = le32_to_cpu(resp->db_addr_low);
+ phys_addr |= (u64)le32_to_cpu(resp->db_addr_high) << 32;
+ addr = devm_ioremap(ph->dev, phys_addr, size);
+ if (!addr) {
+ ret = -EADDRNOTAVAIL;
+ goto err_db_mem;
+ }
+
+ db->addr = addr;
+ db->width = size;
+ db->set = le32_to_cpu(resp->db_set_lmask);
+ db->set |= (u64)le32_to_cpu(resp->db_set_hmask) << 32;
+ db->mask = le32_to_cpu(resp->db_preserve_lmask);
+ db->mask |= (u64)le32_to_cpu(resp->db_preserve_hmask) << 32;
+
+ *p_db = db;
+ }
+
+ ph->xops->xfer_put(ph, t);
+
+ dev_dbg(ph->dev,
+ "Using valid FC for protocol %X [MSG_ID:%u / RES_ID:%u]\n",
+ pi->proto->id, message_id, domain);
+
+ return;
+
+err_db_mem:
+ devm_kfree(ph->dev, db);
+
+err_db:
+ *p_addr = NULL;
+
+err_xfer:
+ ph->xops->xfer_put(ph, t);
+
+err_out:
+ dev_warn(ph->dev,
+ "Failed to get FC for protocol %X [MSG_ID:%u / RES_ID:%u] - ret:%d. Using regular messaging.\n",
+ pi->proto->id, message_id, domain, ret);
+}
+
+#define SCMI_PROTO_FC_RING_DB(w) \
+do { \
+ u##w val = 0; \
+ \
+ if (db->mask) \
+ val = ioread##w(db->addr) & db->mask; \
+ iowrite##w((u##w)db->set | val, db->addr); \
+} while (0)
+
+static void scmi_common_fastchannel_db_ring(struct scmi_fc_db_info *db)
+{
+ if (!db || !db->addr)
+ return;
+
+ if (db->width == 1)
+ SCMI_PROTO_FC_RING_DB(8);
+ else if (db->width == 2)
+ SCMI_PROTO_FC_RING_DB(16);
+ else if (db->width == 4)
+ SCMI_PROTO_FC_RING_DB(32);
+ else /* db->width == 8 */
+#ifdef CONFIG_64BIT
+ SCMI_PROTO_FC_RING_DB(64);
+#else
+ {
+ u64 val = 0;
+
+ if (db->mask)
+ val = ioread64_hi_lo(db->addr) & db->mask;
+ iowrite64_hi_lo(db->set | val, db->addr);
+ }
+#endif
+}
+
+static const struct scmi_proto_helpers_ops helpers_ops = {
+ .extended_name_get = scmi_common_extended_name_get,
+ .iter_response_init = scmi_iterator_init,
+ .iter_response_run = scmi_iterator_run,
+ .fastchannel_init = scmi_common_fastchannel_init,
+ .fastchannel_db_ring = scmi_common_fastchannel_db_ring,
+};
+
+/**
+ * scmi_revision_area_get - Retrieve version memory area.
+ *
+ * @ph: A reference to the protocol handle.
+ *
+ * A helper to grab the version memory area reference during SCMI Base protocol
+ * initialization.
+ *
+ * Return: A reference to the version memory area associated to the SCMI
+ * instance underlying this protocol handle.
+ */
+struct scmi_revision_info *
+scmi_revision_area_get(const struct scmi_protocol_handle *ph)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+
+ return pi->handle->version;
+}
+
+/**
+ * scmi_alloc_init_protocol_instance - Allocate and initialize a protocol
+ * instance descriptor.
+ * @info: The reference to the related SCMI instance.
+ * @proto: The protocol descriptor.
+ *
+ * Allocate a new protocol instance descriptor, using the provided @proto
+ * description, against the specified SCMI instance @info, and initialize it;
+ * all resources management is handled via a dedicated per-protocol devres
+ * group.
+ *
+ * Context: Assumes to be called with @protocols_mtx already acquired.
+ * Return: A reference to a freshly allocated and initialized protocol instance
+ * or ERR_PTR on failure. On failure the @proto reference is at first
+ * put using @scmi_protocol_put() before releasing all the devres group.
+ */
+static struct scmi_protocol_instance *
+scmi_alloc_init_protocol_instance(struct scmi_info *info,
+ const struct scmi_protocol *proto)
+{
+ int ret = -ENOMEM;
+ void *gid;
+ struct scmi_protocol_instance *pi;
+ const struct scmi_handle *handle = &info->handle;
+
+ /* Protocol specific devres group */
+ gid = devres_open_group(handle->dev, NULL, GFP_KERNEL);
+ if (!gid) {
+ scmi_protocol_put(proto->id);
+ goto out;
+ }
+
+ pi = devm_kzalloc(handle->dev, sizeof(*pi), GFP_KERNEL);
+ if (!pi)
+ goto clean;
+
+ pi->gid = gid;
+ pi->proto = proto;
+ pi->handle = handle;
+ pi->ph.dev = handle->dev;
+ pi->ph.xops = &xfer_ops;
+ pi->ph.hops = &helpers_ops;
+ pi->ph.set_priv = scmi_set_protocol_priv;
+ pi->ph.get_priv = scmi_get_protocol_priv;
+ refcount_set(&pi->users, 1);
+ /* proto->init is assured NON NULL by scmi_protocol_register */
+ ret = pi->proto->instance_init(&pi->ph);
+ if (ret)
+ goto clean;
+
+ ret = idr_alloc(&info->protocols, pi, proto->id, proto->id + 1,
+ GFP_KERNEL);
+ if (ret != proto->id)
+ goto clean;
+
+ /*
+ * Warn but ignore events registration errors since we do not want
+ * to skip whole protocols if their notifications are messed up.
+ */
+ if (pi->proto->events) {
+ ret = scmi_register_protocol_events(handle, pi->proto->id,
+ &pi->ph,
+ pi->proto->events);
+ if (ret)
+ dev_warn(handle->dev,
+ "Protocol:%X - Events Registration Failed - err:%d\n",
+ pi->proto->id, ret);
+ }
+
+ devres_close_group(handle->dev, pi->gid);
+ dev_dbg(handle->dev, "Initialized protocol: 0x%X\n", pi->proto->id);
+
+ return pi;
+
+clean:
+ /* Take care to put the protocol module's owner before releasing all */
+ scmi_protocol_put(proto->id);
+ devres_release_group(handle->dev, gid);
+out:
+ return ERR_PTR(ret);
+}
+
+/**
+ * scmi_get_protocol_instance - Protocol initialization helper.
+ * @handle: A reference to the SCMI platform instance.
+ * @protocol_id: The protocol being requested.
+ *
+ * In case the required protocol has never been requested before for this
+ * instance, allocate and initialize all the needed structures while handling
+ * resource allocation with a dedicated per-protocol devres subgroup.
+ *
+ * Return: A reference to an initialized protocol instance or error on failure:
+ * in particular returns -EPROBE_DEFER when the desired protocol could
+ * NOT be found.
+ */
+static struct scmi_protocol_instance * __must_check
+scmi_get_protocol_instance(const struct scmi_handle *handle, u8 protocol_id)
+{
+ struct scmi_protocol_instance *pi;
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ mutex_lock(&info->protocols_mtx);
+ pi = idr_find(&info->protocols, protocol_id);
+
+ if (pi) {
+ refcount_inc(&pi->users);
+ } else {
+ const struct scmi_protocol *proto;
+
+ /* Fails if protocol not registered on bus */
+ proto = scmi_protocol_get(protocol_id);
+ if (proto)
+ pi = scmi_alloc_init_protocol_instance(info, proto);
+ else
+ pi = ERR_PTR(-EPROBE_DEFER);
+ }
+ mutex_unlock(&info->protocols_mtx);
+
+ return pi;
+}
+
+/**
+ * scmi_protocol_acquire - Protocol acquire
+ * @handle: A reference to the SCMI platform instance.
+ * @protocol_id: The protocol being requested.
+ *
+ * Register a new user for the requested protocol on the specified SCMI
+ * platform instance, possibly triggering its initialization on first user.
+ *
+ * Return: 0 if protocol was acquired successfully.
+ */
+int scmi_protocol_acquire(const struct scmi_handle *handle, u8 protocol_id)
+{
+ return PTR_ERR_OR_ZERO(scmi_get_protocol_instance(handle, protocol_id));
+}
+
+/**
+ * scmi_protocol_release - Protocol de-initialization helper.
+ * @handle: A reference to the SCMI platform instance.
+ * @protocol_id: The protocol being requested.
+ *
+ * Remove one user for the specified protocol and triggers de-initialization
+ * and resources de-allocation once the last user has gone.
+ */
+void scmi_protocol_release(const struct scmi_handle *handle, u8 protocol_id)
+{
+ struct scmi_info *info = handle_to_scmi_info(handle);
+ struct scmi_protocol_instance *pi;
+
+ mutex_lock(&info->protocols_mtx);
+ pi = idr_find(&info->protocols, protocol_id);
+ if (WARN_ON(!pi))
+ goto out;
+
+ if (refcount_dec_and_test(&pi->users)) {
+ void *gid = pi->gid;
+
+ if (pi->proto->events)
+ scmi_deregister_protocol_events(handle, protocol_id);
+
+ if (pi->proto->instance_deinit)
+ pi->proto->instance_deinit(&pi->ph);
+
+ idr_remove(&info->protocols, protocol_id);
+
+ scmi_protocol_put(protocol_id);
+
+ devres_release_group(handle->dev, gid);
+ dev_dbg(handle->dev, "De-Initialized protocol: 0x%X\n",
+ protocol_id);
+ }
+
+out:
+ mutex_unlock(&info->protocols_mtx);
+}
+
+void scmi_setup_protocol_implemented(const struct scmi_protocol_handle *ph,
+ u8 *prot_imp)
+{
+ const struct scmi_protocol_instance *pi = ph_to_pi(ph);
+ struct scmi_info *info = handle_to_scmi_info(pi->handle);
+
+ info->protocols_imp = prot_imp;
+}
+
+static bool
+scmi_is_protocol_implemented(const struct scmi_handle *handle, u8 prot_id)
+{
+ int i;
+ struct scmi_info *info = handle_to_scmi_info(handle);
+ struct scmi_revision_info *rev = handle->version;
+
+ if (!info->protocols_imp)
+ return false;
+
+ for (i = 0; i < rev->num_protocols; i++)
+ if (info->protocols_imp[i] == prot_id)
+ return true;
+ return false;
+}
+
+struct scmi_protocol_devres {
+ const struct scmi_handle *handle;
+ u8 protocol_id;
+};
+
+static void scmi_devm_release_protocol(struct device *dev, void *res)
+{
+ struct scmi_protocol_devres *dres = res;
+
+ scmi_protocol_release(dres->handle, dres->protocol_id);
+}
+
+static struct scmi_protocol_instance __must_check *
+scmi_devres_protocol_instance_get(struct scmi_device *sdev, u8 protocol_id)
+{
+ struct scmi_protocol_instance *pi;
+ struct scmi_protocol_devres *dres;
+
+ dres = devres_alloc(scmi_devm_release_protocol,
+ sizeof(*dres), GFP_KERNEL);
+ if (!dres)
+ return ERR_PTR(-ENOMEM);
+
+ pi = scmi_get_protocol_instance(sdev->handle, protocol_id);
+ if (IS_ERR(pi)) {
+ devres_free(dres);
+ return pi;
+ }
+
+ dres->handle = sdev->handle;
+ dres->protocol_id = protocol_id;
+ devres_add(&sdev->dev, dres);
+
+ return pi;
+}
+
+/**
+ * scmi_devm_protocol_get - Devres managed get protocol operations and handle
+ * @sdev: A reference to an scmi_device whose embedded struct device is to
+ * be used for devres accounting.
+ * @protocol_id: The protocol being requested.
+ * @ph: A pointer reference used to pass back the associated protocol handle.
+ *
+ * Get hold of a protocol accounting for its usage, eventually triggering its
+ * initialization, and returning the protocol specific operations and related
+ * protocol handle which will be used as first argument in most of the
+ * protocols operations methods.
+ * Being a devres based managed method, protocol hold will be automatically
+ * released, and possibly de-initialized on last user, once the SCMI driver
+ * owning the scmi_device is unbound from it.
+ *
+ * Return: A reference to the requested protocol operations or error.
+ * Must be checked for errors by caller.
+ */
+static const void __must_check *
+scmi_devm_protocol_get(struct scmi_device *sdev, u8 protocol_id,
+ struct scmi_protocol_handle **ph)
+{
+ struct scmi_protocol_instance *pi;
+
+ if (!ph)
+ return ERR_PTR(-EINVAL);
+
+ pi = scmi_devres_protocol_instance_get(sdev, protocol_id);
+ if (IS_ERR(pi))
+ return pi;
+
+ *ph = &pi->ph;
+
+ return pi->proto->ops;
+}
+
+/**
+ * scmi_devm_protocol_acquire - Devres managed helper to get hold of a protocol
+ * @sdev: A reference to an scmi_device whose embedded struct device is to
+ * be used for devres accounting.
+ * @protocol_id: The protocol being requested.
+ *
+ * Get hold of a protocol accounting for its usage, possibly triggering its
+ * initialization but without getting access to its protocol specific operations
+ * and handle.
+ *
+ * Being a devres based managed method, protocol hold will be automatically
+ * released, and possibly de-initialized on last user, once the SCMI driver
+ * owning the scmi_device is unbound from it.
+ *
+ * Return: 0 on SUCCESS
+ */
+static int __must_check scmi_devm_protocol_acquire(struct scmi_device *sdev,
+ u8 protocol_id)
+{
+ struct scmi_protocol_instance *pi;
+
+ pi = scmi_devres_protocol_instance_get(sdev, protocol_id);
+ if (IS_ERR(pi))
+ return PTR_ERR(pi);
+
+ return 0;
+}
+
+static int scmi_devm_protocol_match(struct device *dev, void *res, void *data)
+{
+ struct scmi_protocol_devres *dres = res;
+
+ if (WARN_ON(!dres || !data))
+ return 0;
+
+ return dres->protocol_id == *((u8 *)data);
+}
+
+/**
+ * scmi_devm_protocol_put - Devres managed put protocol operations and handle
+ * @sdev: A reference to an scmi_device whose embedded struct device is to
+ * be used for devres accounting.
+ * @protocol_id: The protocol being requested.
+ *
+ * Explicitly release a protocol hold previously obtained calling the above
+ * @scmi_devm_protocol_get.
+ */
+static void scmi_devm_protocol_put(struct scmi_device *sdev, u8 protocol_id)
+{
+ int ret;
+
+ ret = devres_release(&sdev->dev, scmi_devm_release_protocol,
+ scmi_devm_protocol_match, &protocol_id);
+ WARN_ON(ret);
+}
+
+/**
+ * scmi_is_transport_atomic - Method to check if underlying transport for an
+ * SCMI instance is configured as atomic.
+ *
+ * @handle: A reference to the SCMI platform instance.
+ * @atomic_threshold: An optional return value for the system wide currently
+ * configured threshold for atomic operations.
+ *
+ * Return: True if transport is configured as atomic
+ */
+static bool scmi_is_transport_atomic(const struct scmi_handle *handle,
+ unsigned int *atomic_threshold)
+{
+ bool ret;
+ struct scmi_info *info = handle_to_scmi_info(handle);
+
+ ret = info->desc->atomic_enabled && is_transport_polling_capable(info);
+ if (ret && atomic_threshold)
+ *atomic_threshold = info->atomic_threshold;
+
+ return ret;
+}
+
+static inline
+struct scmi_handle *scmi_handle_get_from_info_unlocked(struct scmi_info *info)
+{
+ info->users++;
+ return &info->handle;
+}
+
+/**
+ * scmi_handle_get() - Get the SCMI handle for a device
+ *
+ * @dev: pointer to device for which we want SCMI handle
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of SCMI protocol library.
+ * scmi_handle_put must be balanced with successful scmi_handle_get
+ *
+ * Return: pointer to handle if successful, NULL on error
+ */
+struct scmi_handle *scmi_handle_get(struct device *dev)
+{
+ struct list_head *p;
+ struct scmi_info *info;
+ struct scmi_handle *handle = NULL;
+
+ mutex_lock(&scmi_list_mutex);
+ list_for_each(p, &scmi_list) {
+ info = list_entry(p, struct scmi_info, node);
+ if (dev->parent == info->dev) {
+ handle = scmi_handle_get_from_info_unlocked(info);
+ break;
+ }
+ }
+ mutex_unlock(&scmi_list_mutex);
+
+ return handle;
+}
+
+/**
+ * scmi_handle_put() - Release the handle acquired by scmi_handle_get
+ *
+ * @handle: handle acquired by scmi_handle_get
+ *
+ * NOTE: The function does not track individual clients of the framework
+ * and is expected to be maintained by caller of SCMI protocol library.
+ * scmi_handle_put must be balanced with successful scmi_handle_get
+ *
+ * Return: 0 is successfully released
+ * if null was passed, it returns -EINVAL;
+ */
+int scmi_handle_put(const struct scmi_handle *handle)
+{
+ struct scmi_info *info;
+
+ if (!handle)
+ return -EINVAL;
+
+ info = handle_to_scmi_info(handle);
+ mutex_lock(&scmi_list_mutex);
+ if (!WARN_ON(!info->users))
+ info->users--;
+ mutex_unlock(&scmi_list_mutex);
+
+ return 0;
+}
+
+static int __scmi_xfer_info_init(struct scmi_info *sinfo,
+ struct scmi_xfers_info *info)
+{
+ int i;
+ struct scmi_xfer *xfer;
+ struct device *dev = sinfo->dev;
+ const struct scmi_desc *desc = sinfo->desc;
+
+ /* Pre-allocated messages, no more than what hdr.seq can support */
+ if (WARN_ON(!info->max_msg || info->max_msg > MSG_TOKEN_MAX)) {
+ dev_err(dev,
+ "Invalid maximum messages %d, not in range [1 - %lu]\n",
+ info->max_msg, MSG_TOKEN_MAX);
+ return -EINVAL;
+ }
+
+ hash_init(info->pending_xfers);
+
+ /* Allocate a bitmask sized to hold MSG_TOKEN_MAX tokens */
+ info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(MSG_TOKEN_MAX),
+ sizeof(long), GFP_KERNEL);
+ if (!info->xfer_alloc_table)
+ return -ENOMEM;
+
+ /*
+ * Preallocate a number of xfers equal to max inflight messages,
+ * pre-initialize the buffer pointer to pre-allocated buffers and
+ * attach all of them to the free list
+ */
+ INIT_HLIST_HEAD(&info->free_xfers);
+ for (i = 0; i < info->max_msg; i++) {
+ xfer = devm_kzalloc(dev, sizeof(*xfer), GFP_KERNEL);
+ if (!xfer)
+ return -ENOMEM;
+
+ xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size,
+ GFP_KERNEL);
+ if (!xfer->rx.buf)
+ return -ENOMEM;
+
+ xfer->tx.buf = xfer->rx.buf;
+ init_completion(&xfer->done);
+ spin_lock_init(&xfer->lock);
+
+ /* Add initialized xfer to the free list */
+ hlist_add_head(&xfer->node, &info->free_xfers);
+ }
+
+ spin_lock_init(&info->xfer_lock);
+
+ return 0;
+}
+
+static int scmi_channels_max_msg_configure(struct scmi_info *sinfo)
+{
+ const struct scmi_desc *desc = sinfo->desc;
+
+ if (!desc->ops->get_max_msg) {
+ sinfo->tx_minfo.max_msg = desc->max_msg;
+ sinfo->rx_minfo.max_msg = desc->max_msg;
+ } else {
+ struct scmi_chan_info *base_cinfo;
+
+ base_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE);
+ if (!base_cinfo)
+ return -EINVAL;
+ sinfo->tx_minfo.max_msg = desc->ops->get_max_msg(base_cinfo);
+
+ /* RX channel is optional so can be skipped */
+ base_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE);
+ if (base_cinfo)
+ sinfo->rx_minfo.max_msg =
+ desc->ops->get_max_msg(base_cinfo);
+ }
+
+ return 0;
+}
+
+static int scmi_xfer_info_init(struct scmi_info *sinfo)
+{
+ int ret;
+
+ ret = scmi_channels_max_msg_configure(sinfo);
+ if (ret)
+ return ret;
+
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo);
+ if (!ret && !idr_is_empty(&sinfo->rx_idr))
+ ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo);
+
+ return ret;
+}
+
+static int scmi_chan_setup(struct scmi_info *info, struct device *dev,
+ int prot_id, bool tx)
+{
+ int ret, idx;
+ struct scmi_chan_info *cinfo;
+ struct idr *idr;
+
+ /* Transmit channel is first entry i.e. index 0 */
+ idx = tx ? 0 : 1;
+ idr = tx ? &info->tx_idr : &info->rx_idr;
+
+ /* check if already allocated, used for multiple device per protocol */
+ cinfo = idr_find(idr, prot_id);
+ if (cinfo)
+ return 0;
+
+ if (!info->desc->ops->chan_available(dev, idx)) {
+ cinfo = idr_find(idr, SCMI_PROTOCOL_BASE);
+ if (unlikely(!cinfo)) /* Possible only if platform has no Rx */
+ return -EINVAL;
+ goto idr_alloc;
+ }
+
+ cinfo = devm_kzalloc(info->dev, sizeof(*cinfo), GFP_KERNEL);
+ if (!cinfo)
+ return -ENOMEM;
+
+ cinfo->dev = dev;
+ cinfo->rx_timeout_ms = info->desc->max_rx_timeout_ms;
+
+ ret = info->desc->ops->chan_setup(cinfo, info->dev, tx);
+ if (ret)
+ return ret;
+
+ if (tx && is_polling_required(cinfo, info)) {
+ if (is_transport_polling_capable(info))
+ dev_info(dev,
+ "Enabled polling mode TX channel - prot_id:%d\n",
+ prot_id);
+ else
+ dev_warn(dev,
+ "Polling mode NOT supported by transport.\n");
+ }
+
+idr_alloc:
+ ret = idr_alloc(idr, cinfo, prot_id, prot_id + 1, GFP_KERNEL);
+ if (ret != prot_id) {
+ dev_err(dev, "unable to allocate SCMI idr slot err %d\n", ret);
+ return ret;
+ }
+
+ cinfo->handle = &info->handle;
+ return 0;
+}
+
+static inline int
+scmi_txrx_setup(struct scmi_info *info, struct device *dev, int prot_id)
+{
+ int ret = scmi_chan_setup(info, dev, prot_id, true);
+
+ if (!ret) {
+ /* Rx is optional, report only memory errors */
+ ret = scmi_chan_setup(info, dev, prot_id, false);
+ if (ret && ret != -ENOMEM)
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/**
+ * scmi_get_protocol_device - Helper to get/create an SCMI device.
+ *
+ * @np: A device node representing a valid active protocols for the referred
+ * SCMI instance.
+ * @info: The referred SCMI instance for which we are getting/creating this
+ * device.
+ * @prot_id: The protocol ID.
+ * @name: The device name.
+ *
+ * Referring to the specific SCMI instance identified by @info, this helper
+ * takes care to return a properly initialized device matching the requested
+ * @proto_id and @name: if device was still not existent it is created as a
+ * child of the specified SCMI instance @info and its transport properly
+ * initialized as usual.
+ *
+ * Return: A properly initialized scmi device, NULL otherwise.
+ */
+static inline struct scmi_device *
+scmi_get_protocol_device(struct device_node *np, struct scmi_info *info,
+ int prot_id, const char *name)
+{
+ struct scmi_device *sdev;
+
+ /* Already created for this parent SCMI instance ? */
+ sdev = scmi_child_dev_find(info->dev, prot_id, name);
+ if (sdev)
+ return sdev;
+
+ mutex_lock(&scmi_syspower_mtx);
+ if (prot_id == SCMI_PROTOCOL_SYSTEM && scmi_syspower_registered) {
+ dev_warn(info->dev,
+ "SCMI SystemPower protocol device must be unique !\n");
+ mutex_unlock(&scmi_syspower_mtx);
+
+ return NULL;
+ }
+
+ pr_debug("Creating SCMI device (%s) for protocol %x\n", name, prot_id);
+
+ sdev = scmi_device_create(np, info->dev, prot_id, name);
+ if (!sdev) {
+ dev_err(info->dev, "failed to create %d protocol device\n",
+ prot_id);
+ mutex_unlock(&scmi_syspower_mtx);
+
+ return NULL;
+ }
+
+ if (scmi_txrx_setup(info, &sdev->dev, prot_id)) {
+ dev_err(&sdev->dev, "failed to setup transport\n");
+ scmi_device_destroy(sdev);
+ mutex_unlock(&scmi_syspower_mtx);
+
+ return NULL;
+ }
+
+ if (prot_id == SCMI_PROTOCOL_SYSTEM)
+ scmi_syspower_registered = true;
+
+ mutex_unlock(&scmi_syspower_mtx);
+
+ return sdev;
+}
+
+static inline void
+scmi_create_protocol_device(struct device_node *np, struct scmi_info *info,
+ int prot_id, const char *name)
+{
+ struct scmi_device *sdev;
+
+ sdev = scmi_get_protocol_device(np, info, prot_id, name);
+ if (!sdev)
+ return;
+
+ /* setup handle now as the transport is ready */
+ scmi_set_handle(sdev);
+}
+
+/**
+ * scmi_create_protocol_devices - Create devices for all pending requests for
+ * this SCMI instance.
+ *
+ * @np: The device node describing the protocol
+ * @info: The SCMI instance descriptor
+ * @prot_id: The protocol ID
+ *
+ * All devices previously requested for this instance (if any) are found and
+ * created by scanning the proper @&scmi_requested_devices entry.
+ */
+static void scmi_create_protocol_devices(struct device_node *np,
+ struct scmi_info *info, int prot_id)
+{
+ struct list_head *phead;
+
+ mutex_lock(&scmi_requested_devices_mtx);
+ phead = idr_find(&scmi_requested_devices, prot_id);
+ if (phead) {
+ struct scmi_requested_dev *rdev;
+
+ list_for_each_entry(rdev, phead, node)
+ scmi_create_protocol_device(np, info, prot_id,
+ rdev->id_table->name);
+ }
+ mutex_unlock(&scmi_requested_devices_mtx);
+}
+
+/**
+ * scmi_protocol_device_request - Helper to request a device
+ *
+ * @id_table: A protocol/name pair descriptor for the device to be created.
+ *
+ * This helper let an SCMI driver request specific devices identified by the
+ * @id_table to be created for each active SCMI instance.
+ *
+ * The requested device name MUST NOT be already existent for any protocol;
+ * at first the freshly requested @id_table is annotated in the IDR table
+ * @scmi_requested_devices, then a matching device is created for each already
+ * active SCMI instance. (if any)
+ *
+ * This way the requested device is created straight-away for all the already
+ * initialized(probed) SCMI instances (handles) and it remains also annotated
+ * as pending creation if the requesting SCMI driver was loaded before some
+ * SCMI instance and related transports were available: when such late instance
+ * is probed, its probe will take care to scan the list of pending requested
+ * devices and create those on its own (see @scmi_create_protocol_devices and
+ * its enclosing loop)
+ *
+ * Return: 0 on Success
+ */
+int scmi_protocol_device_request(const struct scmi_device_id *id_table)
+{
+ int ret = 0;
+ unsigned int id = 0;
+ struct list_head *head, *phead = NULL;
+ struct scmi_requested_dev *rdev;
+ struct scmi_info *info;
+
+ pr_debug("Requesting SCMI device (%s) for protocol %x\n",
+ id_table->name, id_table->protocol_id);
+
+ /*
+ * Search for the matching protocol rdev list and then search
+ * of any existent equally named device...fails if any duplicate found.
+ */
+ mutex_lock(&scmi_requested_devices_mtx);
+ idr_for_each_entry(&scmi_requested_devices, head, id) {
+ if (!phead) {
+ /* A list found registered in the IDR is never empty */
+ rdev = list_first_entry(head, struct scmi_requested_dev,
+ node);
+ if (rdev->id_table->protocol_id ==
+ id_table->protocol_id)
+ phead = head;
+ }
+ list_for_each_entry(rdev, head, node) {
+ if (!strcmp(rdev->id_table->name, id_table->name)) {
+ pr_err("Ignoring duplicate request [%d] %s\n",
+ rdev->id_table->protocol_id,
+ rdev->id_table->name);
+ ret = -EINVAL;
+ goto out;
+ }
+ }
+ }
+
+ /*
+ * No duplicate found for requested id_table, so let's create a new
+ * requested device entry for this new valid request.
+ */
+ rdev = kzalloc(sizeof(*rdev), GFP_KERNEL);
+ if (!rdev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+ rdev->id_table = id_table;
+
+ /*
+ * Append the new requested device table descriptor to the head of the
+ * related protocol list, eventually creating such head if not already
+ * there.
+ */
+ if (!phead) {
+ phead = kzalloc(sizeof(*phead), GFP_KERNEL);
+ if (!phead) {
+ kfree(rdev);
+ ret = -ENOMEM;
+ goto out;
+ }
+ INIT_LIST_HEAD(phead);
+
+ ret = idr_alloc(&scmi_requested_devices, (void *)phead,
+ id_table->protocol_id,
+ id_table->protocol_id + 1, GFP_KERNEL);
+ if (ret != id_table->protocol_id) {
+ pr_err("Failed to save SCMI device - ret:%d\n", ret);
+ kfree(rdev);
+ kfree(phead);
+ ret = -EINVAL;
+ goto out;
+ }
+ ret = 0;
+ }
+ list_add(&rdev->node, phead);
+
+ /*
+ * Now effectively create and initialize the requested device for every
+ * already initialized SCMI instance which has registered the requested
+ * protocol as a valid active one: i.e. defined in DT and supported by
+ * current platform FW.
+ */
+ mutex_lock(&scmi_list_mutex);
+ list_for_each_entry(info, &scmi_list, node) {
+ struct device_node *child;
+
+ child = idr_find(&info->active_protocols,
+ id_table->protocol_id);
+ if (child) {
+ struct scmi_device *sdev;
+
+ sdev = scmi_get_protocol_device(child, info,
+ id_table->protocol_id,
+ id_table->name);
+ if (sdev) {
+ /* Set handle if not already set: device existed */
+ if (!sdev->handle)
+ sdev->handle =
+ scmi_handle_get_from_info_unlocked(info);
+ /* Relink consumer and suppliers */
+ if (sdev->handle)
+ scmi_device_link_add(&sdev->dev,
+ sdev->handle->dev);
+ }
+ } else {
+ dev_err(info->dev,
+ "Failed. SCMI protocol %d not active.\n",
+ id_table->protocol_id);
+ }
+ }
+ mutex_unlock(&scmi_list_mutex);
+
+out:
+ mutex_unlock(&scmi_requested_devices_mtx);
+
+ return ret;
+}
+
+/**
+ * scmi_protocol_device_unrequest - Helper to unrequest a device
+ *
+ * @id_table: A protocol/name pair descriptor for the device to be unrequested.
+ *
+ * An helper to let an SCMI driver release its request about devices; note that
+ * devices are created and initialized once the first SCMI driver request them
+ * but they destroyed only on SCMI core unloading/unbinding.
+ *
+ * The current SCMI transport layer uses such devices as internal references and
+ * as such they could be shared as same transport between multiple drivers so
+ * that cannot be safely destroyed till the whole SCMI stack is removed.
+ * (unless adding further burden of refcounting.)
+ */
+void scmi_protocol_device_unrequest(const struct scmi_device_id *id_table)
+{
+ struct list_head *phead;
+
+ pr_debug("Unrequesting SCMI device (%s) for protocol %x\n",
+ id_table->name, id_table->protocol_id);
+
+ mutex_lock(&scmi_requested_devices_mtx);
+ phead = idr_find(&scmi_requested_devices, id_table->protocol_id);
+ if (phead) {
+ struct scmi_requested_dev *victim, *tmp;
+
+ list_for_each_entry_safe(victim, tmp, phead, node) {
+ if (!strcmp(victim->id_table->name, id_table->name)) {
+ list_del(&victim->node);
+ kfree(victim);
+ break;
+ }
+ }
+
+ if (list_empty(phead)) {
+ idr_remove(&scmi_requested_devices,
+ id_table->protocol_id);
+ kfree(phead);
+ }
+ }
+ mutex_unlock(&scmi_requested_devices_mtx);
+}
+
+static int scmi_cleanup_txrx_channels(struct scmi_info *info)
+{
+ int ret;
+ struct idr *idr = &info->tx_idr;
+
+ ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+ idr_destroy(&info->tx_idr);
+
+ idr = &info->rx_idr;
+ ret = idr_for_each(idr, info->desc->ops->chan_free, idr);
+ idr_destroy(&info->rx_idr);
+
+ return ret;
+}
+
+static int scmi_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct scmi_handle *handle;
+ const struct scmi_desc *desc;
+ struct scmi_info *info;
+ struct device *dev = &pdev->dev;
+ struct device_node *child, *np = dev->of_node;
+
+ desc = of_device_get_match_data(dev);
+ if (!desc)
+ return -EINVAL;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = dev;
+ info->desc = desc;
+ INIT_LIST_HEAD(&info->node);
+ idr_init(&info->protocols);
+ mutex_init(&info->protocols_mtx);
+ idr_init(&info->active_protocols);
+
+ platform_set_drvdata(pdev, info);
+ idr_init(&info->tx_idr);
+ idr_init(&info->rx_idr);
+
+ handle = &info->handle;
+ handle->dev = info->dev;
+ handle->version = &info->version;
+ handle->devm_protocol_acquire = scmi_devm_protocol_acquire;
+ handle->devm_protocol_get = scmi_devm_protocol_get;
+ handle->devm_protocol_put = scmi_devm_protocol_put;
+
+ /* System wide atomic threshold for atomic ops .. if any */
+ if (!of_property_read_u32(np, "atomic-threshold-us",
+ &info->atomic_threshold))
+ dev_info(dev,
+ "SCMI System wide atomic threshold set to %d us\n",
+ info->atomic_threshold);
+ handle->is_transport_atomic = scmi_is_transport_atomic;
+
+ if (desc->ops->link_supplier) {
+ ret = desc->ops->link_supplier(dev);
+ if (ret)
+ return ret;
+ }
+
+ ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE);
+ if (ret)
+ return ret;
+
+ ret = scmi_xfer_info_init(info);
+ if (ret)
+ goto clear_txrx_setup;
+
+ if (scmi_notification_init(handle))
+ dev_err(dev, "SCMI Notifications NOT available.\n");
+
+ if (info->desc->atomic_enabled && !is_transport_polling_capable(info))
+ dev_err(dev,
+ "Transport is not polling capable. Atomic mode not supported.\n");
+
+ /*
+ * Trigger SCMI Base protocol initialization.
+ * It's mandatory and won't be ever released/deinit until the
+ * SCMI stack is shutdown/unloaded as a whole.
+ */
+ ret = scmi_protocol_acquire(handle, SCMI_PROTOCOL_BASE);
+ if (ret) {
+ dev_err(dev, "unable to communicate with SCMI\n");
+ goto notification_exit;
+ }
+
+ mutex_lock(&scmi_list_mutex);
+ list_add_tail(&info->node, &scmi_list);
+ mutex_unlock(&scmi_list_mutex);
+
+ for_each_available_child_of_node(np, child) {
+ u32 prot_id;
+
+ if (of_property_read_u32(child, "reg", &prot_id))
+ continue;
+
+ if (!FIELD_FIT(MSG_PROTOCOL_ID_MASK, prot_id))
+ dev_err(dev, "Out of range protocol %d\n", prot_id);
+
+ if (!scmi_is_protocol_implemented(handle, prot_id)) {
+ dev_err(dev, "SCMI protocol %d not implemented\n",
+ prot_id);
+ continue;
+ }
+
+ /*
+ * Save this valid DT protocol descriptor amongst
+ * @active_protocols for this SCMI instance/
+ */
+ ret = idr_alloc(&info->active_protocols, child,
+ prot_id, prot_id + 1, GFP_KERNEL);
+ if (ret != prot_id) {
+ dev_err(dev, "SCMI protocol %d already activated. Skip\n",
+ prot_id);
+ continue;
+ }
+
+ of_node_get(child);
+ scmi_create_protocol_devices(child, info, prot_id);
+ }
+
+ return 0;
+
+notification_exit:
+ scmi_notification_exit(&info->handle);
+clear_txrx_setup:
+ scmi_cleanup_txrx_channels(info);
+ return ret;
+}
+
+void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id)
+{
+ idr_remove(idr, id);
+}
+
+static int scmi_remove(struct platform_device *pdev)
+{
+ int ret, id;
+ struct scmi_info *info = platform_get_drvdata(pdev);
+ struct device_node *child;
+
+ mutex_lock(&scmi_list_mutex);
+ if (info->users)
+ dev_warn(&pdev->dev,
+ "Still active SCMI users will be forcibly unbound.\n");
+ list_del(&info->node);
+ mutex_unlock(&scmi_list_mutex);
+
+ scmi_notification_exit(&info->handle);
+
+ mutex_lock(&info->protocols_mtx);
+ idr_destroy(&info->protocols);
+ mutex_unlock(&info->protocols_mtx);
+
+ idr_for_each_entry(&info->active_protocols, child, id)
+ of_node_put(child);
+ idr_destroy(&info->active_protocols);
+
+ /* Safe to free channels since no more users */
+ ret = scmi_cleanup_txrx_channels(info);
+ if (ret)
+ dev_warn(&pdev->dev, "Failed to cleanup SCMI channels.\n");
+
+ return 0;
+}
+
+static ssize_t protocol_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scmi_info *info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%u.%u\n", info->version.major_ver,
+ info->version.minor_ver);
+}
+static DEVICE_ATTR_RO(protocol_version);
+
+static ssize_t firmware_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scmi_info *info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "0x%x\n", info->version.impl_ver);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static ssize_t vendor_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scmi_info *info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", info->version.vendor_id);
+}
+static DEVICE_ATTR_RO(vendor_id);
+
+static ssize_t sub_vendor_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct scmi_info *info = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s\n", info->version.sub_vendor_id);
+}
+static DEVICE_ATTR_RO(sub_vendor_id);
+
+static struct attribute *versions_attrs[] = {
+ &dev_attr_firmware_version.attr,
+ &dev_attr_protocol_version.attr,
+ &dev_attr_vendor_id.attr,
+ &dev_attr_sub_vendor_id.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(versions);
+
+/* Each compatible listed below must have descriptor associated with it */
+static const struct of_device_id scmi_of_match[] = {
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_MAILBOX
+ { .compatible = "arm,scmi", .data = &scmi_mailbox_desc },
+#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_OPTEE
+ { .compatible = "linaro,scmi-optee", .data = &scmi_optee_desc },
+#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_SMC
+ { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc},
+#endif
+#ifdef CONFIG_ARM_SCMI_TRANSPORT_VIRTIO
+ { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc},
+#endif
+ { /* Sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, scmi_of_match);
+
+static struct platform_driver scmi_driver = {
+ .driver = {
+ .name = "arm-scmi",
+ .suppress_bind_attrs = true,
+ .of_match_table = scmi_of_match,
+ .dev_groups = versions_groups,
+ },
+ .probe = scmi_probe,
+ .remove = scmi_remove,
+};
+
+/**
+ * __scmi_transports_setup - Common helper to call transport-specific
+ * .init/.exit code if provided.
+ *
+ * @init: A flag to distinguish between init and exit.
+ *
+ * Note that, if provided, we invoke .init/.exit functions for all the
+ * transports currently compiled in.
+ *
+ * Return: 0 on Success.
+ */
+static inline int __scmi_transports_setup(bool init)
+{
+ int ret = 0;
+ const struct of_device_id *trans;
+
+ for (trans = scmi_of_match; trans->data; trans++) {
+ const struct scmi_desc *tdesc = trans->data;
+
+ if ((init && !tdesc->transport_init) ||
+ (!init && !tdesc->transport_exit))
+ continue;
+
+ if (init)
+ ret = tdesc->transport_init();
+ else
+ tdesc->transport_exit();
+
+ if (ret) {
+ pr_err("SCMI transport %s FAILED initialization!\n",
+ trans->compatible);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+static int __init scmi_transports_init(void)
+{
+ return __scmi_transports_setup(true);
+}
+
+static void __exit scmi_transports_exit(void)
+{
+ __scmi_transports_setup(false);
+}
+
+static int __init scmi_driver_init(void)
+{
+ int ret;
+
+ /* Bail out if no SCMI transport was configured */
+ if (WARN_ON(!IS_ENABLED(CONFIG_ARM_SCMI_HAVE_TRANSPORT)))
+ return -EINVAL;
+
+ scmi_bus_init();
+
+ /* Initialize any compiled-in transport which provided an init/exit */
+ ret = scmi_transports_init();
+ if (ret)
+ return ret;
+
+ scmi_base_register();
+
+ scmi_clock_register();
+ scmi_perf_register();
+ scmi_power_register();
+ scmi_reset_register();
+ scmi_sensors_register();
+ scmi_voltage_register();
+ scmi_system_register();
+ scmi_powercap_register();
+
+ return platform_driver_register(&scmi_driver);
+}
+subsys_initcall(scmi_driver_init);
+
+static void __exit scmi_driver_exit(void)
+{
+ scmi_base_unregister();
+
+ scmi_clock_unregister();
+ scmi_perf_unregister();
+ scmi_power_unregister();
+ scmi_reset_unregister();
+ scmi_sensors_unregister();
+ scmi_voltage_unregister();
+ scmi_system_unregister();
+ scmi_powercap_unregister();
+
+ scmi_bus_exit();
+
+ scmi_transports_exit();
+
+ platform_driver_unregister(&scmi_driver);
+}
+module_exit(scmi_driver_exit);
+
+MODULE_ALIAS("platform:arm-scmi");
+MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
+MODULE_DESCRIPTION("ARM SCMI protocol driver");
+MODULE_LICENSE("GPL v2");