summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/bridge/chipone-icn6211.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/bridge/chipone-icn6211.c')
-rw-r--r--drivers/gpu/drm/bridge/chipone-icn6211.c827
1 files changed, 827 insertions, 0 deletions
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
new file mode 100644
index 000000000..bf920c350
--- /dev/null
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -0,0 +1,827 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#define VENDOR_ID 0x00
+#define DEVICE_ID_H 0x01
+#define DEVICE_ID_L 0x02
+#define VERSION_ID 0x03
+#define FIRMWARE_VERSION 0x08
+#define CONFIG_FINISH 0x09
+#define PD_CTRL(n) (0x0a + ((n) & 0x3)) /* 0..3 */
+#define RST_CTRL(n) (0x0e + ((n) & 0x1)) /* 0..1 */
+#define SYS_CTRL(n) (0x10 + ((n) & 0x7)) /* 0..4 */
+#define SYS_CTRL_1_CLK_PHASE_MSK GENMASK(5, 4)
+#define CLK_PHASE_0 0
+#define CLK_PHASE_1_4 1
+#define CLK_PHASE_1_2 2
+#define CLK_PHASE_3_4 3
+#define RGB_DRV(n) (0x18 + ((n) & 0x3)) /* 0..3 */
+#define RGB_DLY(n) (0x1c + ((n) & 0x1)) /* 0..1 */
+#define RGB_TEST_CTRL 0x1e
+#define ATE_PLL_EN 0x1f
+#define HACTIVE_LI 0x20
+#define VACTIVE_LI 0x21
+#define VACTIVE_HACTIVE_HI 0x22
+#define HFP_LI 0x23
+#define HSYNC_LI 0x24
+#define HBP_LI 0x25
+#define HFP_HSW_HBP_HI 0x26
+#define HFP_HSW_HBP_HI_HFP(n) (((n) & 0x300) >> 4)
+#define HFP_HSW_HBP_HI_HS(n) (((n) & 0x300) >> 6)
+#define HFP_HSW_HBP_HI_HBP(n) (((n) & 0x300) >> 8)
+#define VFP 0x27
+#define VSYNC 0x28
+#define VBP 0x29
+#define BIST_POL 0x2a
+#define BIST_POL_BIST_MODE(n) (((n) & 0xf) << 4)
+#define BIST_POL_BIST_GEN BIT(3)
+#define BIST_POL_HSYNC_POL BIT(2)
+#define BIST_POL_VSYNC_POL BIT(1)
+#define BIST_POL_DE_POL BIT(0)
+#define BIST_RED 0x2b
+#define BIST_GREEN 0x2c
+#define BIST_BLUE 0x2d
+#define BIST_CHESS_X 0x2e
+#define BIST_CHESS_Y 0x2f
+#define BIST_CHESS_XY_H 0x30
+#define BIST_FRAME_TIME_L 0x31
+#define BIST_FRAME_TIME_H 0x32
+#define FIFO_MAX_ADDR_LOW 0x33
+#define SYNC_EVENT_DLY 0x34
+#define HSW_MIN 0x35
+#define HFP_MIN 0x36
+#define LOGIC_RST_NUM 0x37
+#define OSC_CTRL(n) (0x48 + ((n) & 0x7)) /* 0..5 */
+#define BG_CTRL 0x4e
+#define LDO_PLL 0x4f
+#define PLL_CTRL(n) (0x50 + ((n) & 0xf)) /* 0..15 */
+#define PLL_CTRL_6_EXTERNAL 0x90
+#define PLL_CTRL_6_MIPI_CLK 0x92
+#define PLL_CTRL_6_INTERNAL 0x93
+#define PLL_REM(n) (0x60 + ((n) & 0x3)) /* 0..2 */
+#define PLL_DIV(n) (0x63 + ((n) & 0x3)) /* 0..2 */
+#define PLL_FRAC(n) (0x66 + ((n) & 0x3)) /* 0..2 */
+#define PLL_INT(n) (0x69 + ((n) & 0x1)) /* 0..1 */
+#define PLL_REF_DIV 0x6b
+#define PLL_REF_DIV_P(n) ((n) & 0xf)
+#define PLL_REF_DIV_Pe BIT(4)
+#define PLL_REF_DIV_S(n) (((n) & 0x7) << 5)
+#define PLL_SSC_P(n) (0x6c + ((n) & 0x3)) /* 0..2 */
+#define PLL_SSC_STEP(n) (0x6f + ((n) & 0x3)) /* 0..2 */
+#define PLL_SSC_OFFSET(n) (0x72 + ((n) & 0x3)) /* 0..3 */
+#define GPIO_OEN 0x79
+#define MIPI_CFG_PW 0x7a
+#define MIPI_CFG_PW_CONFIG_DSI 0xc1
+#define MIPI_CFG_PW_CONFIG_I2C 0x3e
+#define GPIO_SEL(n) (0x7b + ((n) & 0x1)) /* 0..1 */
+#define IRQ_SEL 0x7d
+#define DBG_SEL 0x7e
+#define DBG_SIGNAL 0x7f
+#define MIPI_ERR_VECTOR_L 0x80
+#define MIPI_ERR_VECTOR_H 0x81
+#define MIPI_ERR_VECTOR_EN_L 0x82
+#define MIPI_ERR_VECTOR_EN_H 0x83
+#define MIPI_MAX_SIZE_L 0x84
+#define MIPI_MAX_SIZE_H 0x85
+#define DSI_CTRL 0x86
+#define DSI_CTRL_UNKNOWN 0x28
+#define DSI_CTRL_DSI_LANES(n) ((n) & 0x3)
+#define MIPI_PN_SWAP 0x87
+#define MIPI_PN_SWAP_CLK BIT(4)
+#define MIPI_PN_SWAP_D(n) BIT((n) & 0x3)
+#define MIPI_SOT_SYNC_BIT(n) (0x88 + ((n) & 0x1)) /* 0..1 */
+#define MIPI_ULPS_CTRL 0x8a
+#define MIPI_CLK_CHK_VAR 0x8e
+#define MIPI_CLK_CHK_INI 0x8f
+#define MIPI_T_TERM_EN 0x90
+#define MIPI_T_HS_SETTLE 0x91
+#define MIPI_T_TA_SURE_PRE 0x92
+#define MIPI_T_LPX_SET 0x94
+#define MIPI_T_CLK_MISS 0x95
+#define MIPI_INIT_TIME_L 0x96
+#define MIPI_INIT_TIME_H 0x97
+#define MIPI_T_CLK_TERM_EN 0x99
+#define MIPI_T_CLK_SETTLE 0x9a
+#define MIPI_TO_HS_RX_L 0x9e
+#define MIPI_TO_HS_RX_H 0x9f
+#define MIPI_PHY(n) (0xa0 + ((n) & 0x7)) /* 0..5 */
+#define MIPI_PD_RX 0xb0
+#define MIPI_PD_TERM 0xb1
+#define MIPI_PD_HSRX 0xb2
+#define MIPI_PD_LPTX 0xb3
+#define MIPI_PD_LPRX 0xb4
+#define MIPI_PD_CK_LANE 0xb5
+#define MIPI_FORCE_0 0xb6
+#define MIPI_RST_CTRL 0xb7
+#define MIPI_RST_NUM 0xb8
+#define MIPI_DBG_SET(n) (0xc0 + ((n) & 0xf)) /* 0..9 */
+#define MIPI_DBG_SEL 0xe0
+#define MIPI_DBG_DATA 0xe1
+#define MIPI_ATE_TEST_SEL 0xe2
+#define MIPI_ATE_STATUS(n) (0xe3 + ((n) & 0x1)) /* 0..1 */
+
+struct chipone {
+ struct device *dev;
+ struct regmap *regmap;
+ struct i2c_client *client;
+ struct drm_bridge bridge;
+ struct drm_display_mode mode;
+ struct drm_bridge *panel_bridge;
+ struct mipi_dsi_device *dsi;
+ struct gpio_desc *enable_gpio;
+ struct regulator *vdd1;
+ struct regulator *vdd2;
+ struct regulator *vdd3;
+ struct clk *refclk;
+ unsigned long refclk_rate;
+ bool interface_i2c;
+};
+
+static const struct regmap_range chipone_dsi_readable_ranges[] = {
+ regmap_reg_range(VENDOR_ID, VERSION_ID),
+ regmap_reg_range(FIRMWARE_VERSION, PLL_SSC_OFFSET(3)),
+ regmap_reg_range(GPIO_OEN, MIPI_ULPS_CTRL),
+ regmap_reg_range(MIPI_CLK_CHK_VAR, MIPI_T_TA_SURE_PRE),
+ regmap_reg_range(MIPI_T_LPX_SET, MIPI_INIT_TIME_H),
+ regmap_reg_range(MIPI_T_CLK_TERM_EN, MIPI_T_CLK_SETTLE),
+ regmap_reg_range(MIPI_TO_HS_RX_L, MIPI_PHY(5)),
+ regmap_reg_range(MIPI_PD_RX, MIPI_RST_NUM),
+ regmap_reg_range(MIPI_DBG_SET(0), MIPI_DBG_SET(9)),
+ regmap_reg_range(MIPI_DBG_SEL, MIPI_ATE_STATUS(1)),
+};
+
+static const struct regmap_access_table chipone_dsi_readable_table = {
+ .yes_ranges = chipone_dsi_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(chipone_dsi_readable_ranges),
+};
+
+static const struct regmap_range chipone_dsi_writeable_ranges[] = {
+ regmap_reg_range(CONFIG_FINISH, PLL_SSC_OFFSET(3)),
+ regmap_reg_range(GPIO_OEN, MIPI_ULPS_CTRL),
+ regmap_reg_range(MIPI_CLK_CHK_VAR, MIPI_T_TA_SURE_PRE),
+ regmap_reg_range(MIPI_T_LPX_SET, MIPI_INIT_TIME_H),
+ regmap_reg_range(MIPI_T_CLK_TERM_EN, MIPI_T_CLK_SETTLE),
+ regmap_reg_range(MIPI_TO_HS_RX_L, MIPI_PHY(5)),
+ regmap_reg_range(MIPI_PD_RX, MIPI_RST_NUM),
+ regmap_reg_range(MIPI_DBG_SET(0), MIPI_DBG_SET(9)),
+ regmap_reg_range(MIPI_DBG_SEL, MIPI_ATE_STATUS(1)),
+};
+
+static const struct regmap_access_table chipone_dsi_writeable_table = {
+ .yes_ranges = chipone_dsi_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(chipone_dsi_writeable_ranges),
+};
+
+static const struct regmap_config chipone_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &chipone_dsi_readable_table,
+ .wr_table = &chipone_dsi_writeable_table,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = MIPI_ATE_STATUS(1),
+};
+
+static int chipone_dsi_read(void *context,
+ const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct mipi_dsi_device *dsi = context;
+ const u16 reg16 = (val_size << 8) | *(u8 *)reg;
+ int ret;
+
+ ret = mipi_dsi_generic_read(dsi, &reg16, 2, val, val_size);
+
+ return ret == val_size ? 0 : -EINVAL;
+}
+
+static int chipone_dsi_write(void *context, const void *data, size_t count)
+{
+ struct mipi_dsi_device *dsi = context;
+
+ return mipi_dsi_generic_write(dsi, data, 2);
+}
+
+static const struct regmap_bus chipone_dsi_regmap_bus = {
+ .read = chipone_dsi_read,
+ .write = chipone_dsi_write,
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+};
+
+static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct chipone, bridge);
+}
+
+static void chipone_readb(struct chipone *icn, u8 reg, u8 *val)
+{
+ int ret, pval;
+
+ ret = regmap_read(icn->regmap, reg, &pval);
+
+ *val = ret ? 0 : pval & 0xff;
+}
+
+static int chipone_writeb(struct chipone *icn, u8 reg, u8 val)
+{
+ return regmap_write(icn->regmap, reg, val);
+}
+
+static void chipone_configure_pll(struct chipone *icn,
+ const struct drm_display_mode *mode)
+{
+ unsigned int best_p = 0, best_m = 0, best_s = 0;
+ unsigned int mode_clock = mode->clock * 1000;
+ unsigned int delta, min_delta = 0xffffffff;
+ unsigned int freq_p, freq_s, freq_out;
+ unsigned int p_min, p_max;
+ unsigned int p, m, s;
+ unsigned int fin;
+ bool best_p_pot;
+ u8 ref_div;
+
+ /*
+ * DSI byte clock frequency (input into PLL) is calculated as:
+ * DSI_CLK = HS clock / 4
+ *
+ * DPI pixel clock frequency (output from PLL) is mode clock.
+ *
+ * The chip contains fractional PLL which works as follows:
+ * DPI_CLK = ((DSI_CLK / P) * M) / S
+ * P is pre-divider, register PLL_REF_DIV[3:0] is 1:n divider
+ * register PLL_REF_DIV[4] is extra 1:2 divider
+ * M is integer multiplier, register PLL_INT(0) is multiplier
+ * S is post-divider, register PLL_REF_DIV[7:5] is 2^(n+1) divider
+ *
+ * It seems the PLL input clock after applying P pre-divider have
+ * to be lower than 20 MHz.
+ */
+ if (icn->refclk)
+ fin = icn->refclk_rate;
+ else
+ fin = icn->dsi->hs_rate / 4; /* in Hz */
+
+ /* Minimum value of P predivider for PLL input in 5..20 MHz */
+ p_min = clamp(DIV_ROUND_UP(fin, 20000000), 1U, 31U);
+ p_max = clamp(fin / 5000000, 1U, 31U);
+
+ for (p = p_min; p < p_max; p++) { /* PLL_REF_DIV[4,3:0] */
+ if (p > 16 && p & 1) /* P > 16 uses extra /2 */
+ continue;
+ freq_p = fin / p;
+ if (freq_p == 0) /* Divider too high */
+ break;
+
+ for (s = 0; s < 0x7; s++) { /* PLL_REF_DIV[7:5] */
+ freq_s = freq_p / BIT(s + 1);
+ if (freq_s == 0) /* Divider too high */
+ break;
+
+ m = mode_clock / freq_s;
+
+ /* Multiplier is 8 bit */
+ if (m > 0xff)
+ continue;
+
+ /* Limit PLL VCO frequency to 1 GHz */
+ freq_out = (fin * m) / p;
+ if (freq_out > 1000000000)
+ continue;
+
+ /* Apply post-divider */
+ freq_out /= BIT(s + 1);
+
+ delta = abs(mode_clock - freq_out);
+ if (delta < min_delta) {
+ best_p = p;
+ best_m = m;
+ best_s = s;
+ min_delta = delta;
+ }
+ }
+ }
+
+ best_p_pot = !(best_p & 1);
+
+ dev_dbg(icn->dev,
+ "PLL: P[3:0]=%d P[4]=2*%d M=%d S[7:5]=2^%d delta=%d => DSI f_in(%s)=%d Hz ; DPI f_out=%d Hz\n",
+ best_p >> best_p_pot, best_p_pot, best_m, best_s + 1,
+ min_delta, icn->refclk ? "EXT" : "DSI", fin,
+ (fin * best_m) / (best_p << (best_s + 1)));
+
+ ref_div = PLL_REF_DIV_P(best_p >> best_p_pot) | PLL_REF_DIV_S(best_s);
+ if (best_p_pot) /* Prefer /2 pre-divider */
+ ref_div |= PLL_REF_DIV_Pe;
+
+ /* Clock source selection either external clock or MIPI DSI clock lane */
+ chipone_writeb(icn, PLL_CTRL(6),
+ icn->refclk ? PLL_CTRL_6_EXTERNAL : PLL_CTRL_6_MIPI_CLK);
+ chipone_writeb(icn, PLL_REF_DIV, ref_div);
+ chipone_writeb(icn, PLL_INT(0), best_m);
+}
+
+static void chipone_atomic_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ struct drm_atomic_state *state = old_bridge_state->base.state;
+ struct drm_display_mode *mode = &icn->mode;
+ const struct drm_bridge_state *bridge_state;
+ u16 hfp, hbp, hsync;
+ u32 bus_flags;
+ u8 pol, sys_ctrl_1, id[4];
+
+ chipone_readb(icn, VENDOR_ID, id);
+ chipone_readb(icn, DEVICE_ID_H, id + 1);
+ chipone_readb(icn, DEVICE_ID_L, id + 2);
+ chipone_readb(icn, VERSION_ID, id + 3);
+
+ dev_dbg(icn->dev,
+ "Chip IDs: Vendor=0x%02x Device=0x%02x:0x%02x Version=0x%02x\n",
+ id[0], id[1], id[2], id[3]);
+
+ if (id[0] != 0xc1 || id[1] != 0x62 || id[2] != 0x11) {
+ dev_dbg(icn->dev, "Invalid Chip IDs, aborting configuration\n");
+ return;
+ }
+
+ /* Get the DPI flags from the bridge state. */
+ bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
+ bus_flags = bridge_state->output_bus_cfg.flags;
+
+ if (icn->interface_i2c)
+ chipone_writeb(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_I2C);
+ else
+ chipone_writeb(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
+
+ chipone_writeb(icn, HACTIVE_LI, mode->hdisplay & 0xff);
+
+ chipone_writeb(icn, VACTIVE_LI, mode->vdisplay & 0xff);
+
+ /*
+ * lsb nibble: 2nd nibble of hdisplay
+ * msb nibble: 2nd nibble of vdisplay
+ */
+ chipone_writeb(icn, VACTIVE_HACTIVE_HI,
+ ((mode->hdisplay >> 8) & 0xf) |
+ (((mode->vdisplay >> 8) & 0xf) << 4));
+
+ hfp = mode->hsync_start - mode->hdisplay;
+ hsync = mode->hsync_end - mode->hsync_start;
+ hbp = mode->htotal - mode->hsync_end;
+
+ chipone_writeb(icn, HFP_LI, hfp & 0xff);
+ chipone_writeb(icn, HSYNC_LI, hsync & 0xff);
+ chipone_writeb(icn, HBP_LI, hbp & 0xff);
+ /* Top two bits of Horizontal Front porch/Sync/Back porch */
+ chipone_writeb(icn, HFP_HSW_HBP_HI,
+ HFP_HSW_HBP_HI_HFP(hfp) |
+ HFP_HSW_HBP_HI_HS(hsync) |
+ HFP_HSW_HBP_HI_HBP(hbp));
+
+ chipone_writeb(icn, VFP, mode->vsync_start - mode->vdisplay);
+
+ chipone_writeb(icn, VSYNC, mode->vsync_end - mode->vsync_start);
+
+ chipone_writeb(icn, VBP, mode->vtotal - mode->vsync_end);
+
+ /* dsi specific sequence */
+ chipone_writeb(icn, SYNC_EVENT_DLY, 0x80);
+ chipone_writeb(icn, HFP_MIN, hfp & 0xff);
+
+ /* DSI data lane count */
+ chipone_writeb(icn, DSI_CTRL,
+ DSI_CTRL_UNKNOWN | DSI_CTRL_DSI_LANES(icn->dsi->lanes - 1));
+
+ chipone_writeb(icn, MIPI_PD_CK_LANE, 0xa0);
+ chipone_writeb(icn, PLL_CTRL(12), 0xff);
+ chipone_writeb(icn, MIPI_PN_SWAP, 0x00);
+
+ /* DPI HS/VS/DE polarity */
+ pol = ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIST_POL_HSYNC_POL : 0) |
+ ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIST_POL_VSYNC_POL : 0) |
+ ((bus_flags & DRM_BUS_FLAG_DE_HIGH) ? BIST_POL_DE_POL : 0);
+ chipone_writeb(icn, BIST_POL, pol);
+
+ /* Configure PLL settings */
+ chipone_configure_pll(icn, mode);
+
+ chipone_writeb(icn, SYS_CTRL(0), 0x40);
+ sys_ctrl_1 = 0x88;
+
+ if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE)
+ sys_ctrl_1 |= FIELD_PREP(SYS_CTRL_1_CLK_PHASE_MSK, CLK_PHASE_0);
+ else
+ sys_ctrl_1 |= FIELD_PREP(SYS_CTRL_1_CLK_PHASE_MSK, CLK_PHASE_1_2);
+
+ chipone_writeb(icn, SYS_CTRL(1), sys_ctrl_1);
+
+ /* icn6211 specific sequence */
+ chipone_writeb(icn, MIPI_FORCE_0, 0x20);
+ chipone_writeb(icn, PLL_CTRL(1), 0x20);
+ chipone_writeb(icn, CONFIG_FINISH, 0x10);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_atomic_pre_enable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ int ret;
+
+ if (icn->vdd1) {
+ ret = regulator_enable(icn->vdd1);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD1 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd2) {
+ ret = regulator_enable(icn->vdd2);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD2 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd3) {
+ ret = regulator_enable(icn->vdd3);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD3 regulator: %d\n", ret);
+ }
+
+ ret = clk_prepare_enable(icn->refclk);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable RECLK clock: %d\n", ret);
+
+ gpiod_set_value(icn->enable_gpio, 1);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_atomic_post_disable(struct drm_bridge *bridge,
+ struct drm_bridge_state *old_bridge_state)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ clk_disable_unprepare(icn->refclk);
+
+ if (icn->vdd1)
+ regulator_disable(icn->vdd1);
+
+ if (icn->vdd2)
+ regulator_disable(icn->vdd2);
+
+ if (icn->vdd3)
+ regulator_disable(icn->vdd3);
+
+ gpiod_set_value(icn->enable_gpio, 0);
+}
+
+static void chipone_mode_set(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ const struct drm_display_mode *adjusted_mode)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ drm_mode_copy(&icn->mode, adjusted_mode);
+};
+
+static int chipone_dsi_attach(struct chipone *icn)
+{
+ struct mipi_dsi_device *dsi = icn->dsi;
+ struct device *dev = icn->dev;
+ int dsi_lanes, ret;
+
+ dsi_lanes = drm_of_get_data_lanes_count_ep(dev->of_node, 0, 0, 1, 4);
+
+ /*
+ * If the 'data-lanes' property does not exist in DT or is invalid,
+ * default to previously hard-coded behavior, which was 4 data lanes.
+ */
+ if (dsi_lanes < 0)
+ icn->dsi->lanes = 4;
+ else
+ icn->dsi->lanes = dsi_lanes;
+
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET;
+ dsi->hs_rate = 500000000;
+ dsi->lp_rate = 16000000;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0)
+ dev_err(icn->dev, "failed to attach dsi\n");
+
+ return ret;
+}
+
+static int chipone_dsi_host_attach(struct chipone *icn)
+{
+ struct device *dev = icn->dev;
+ struct device_node *host_node;
+ struct device_node *endpoint;
+ struct mipi_dsi_device *dsi;
+ struct mipi_dsi_host *host;
+ int ret = 0;
+
+ const struct mipi_dsi_device_info info = {
+ .type = "chipone",
+ .channel = 0,
+ .node = NULL,
+ };
+
+ endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0);
+ host_node = of_graph_get_remote_port_parent(endpoint);
+ of_node_put(endpoint);
+
+ if (!host_node)
+ return -EINVAL;
+
+ host = of_find_mipi_dsi_host_by_node(host_node);
+ of_node_put(host_node);
+ if (!host) {
+ dev_err(dev, "failed to find dsi host\n");
+ return -EPROBE_DEFER;
+ }
+
+ dsi = mipi_dsi_device_register_full(host, &info);
+ if (IS_ERR(dsi)) {
+ return dev_err_probe(dev, PTR_ERR(dsi),
+ "failed to create dsi device\n");
+ }
+
+ icn->dsi = dsi;
+
+ ret = chipone_dsi_attach(icn);
+ if (ret < 0)
+ mipi_dsi_device_unregister(dsi);
+
+ return ret;
+}
+
+static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
+}
+
+#define MAX_INPUT_SEL_FORMATS 1
+
+static u32 *
+chipone_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+ struct drm_bridge_state *bridge_state,
+ struct drm_crtc_state *crtc_state,
+ struct drm_connector_state *conn_state,
+ u32 output_fmt,
+ unsigned int *num_input_fmts)
+{
+ u32 *input_fmts;
+
+ *num_input_fmts = 0;
+
+ input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+ GFP_KERNEL);
+ if (!input_fmts)
+ return NULL;
+
+ /* This is the DSI-end bus format */
+ input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+ *num_input_fmts = 1;
+
+ return input_fmts;
+}
+
+static const struct drm_bridge_funcs chipone_bridge_funcs = {
+ .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+ .atomic_reset = drm_atomic_helper_bridge_reset,
+ .atomic_pre_enable = chipone_atomic_pre_enable,
+ .atomic_enable = chipone_atomic_enable,
+ .atomic_post_disable = chipone_atomic_post_disable,
+ .mode_set = chipone_mode_set,
+ .attach = chipone_attach,
+ .atomic_get_input_bus_fmts = chipone_atomic_get_input_bus_fmts,
+};
+
+static int chipone_parse_dt(struct chipone *icn)
+{
+ struct device *dev = icn->dev;
+ int ret;
+
+ icn->refclk = devm_clk_get_optional(dev, "refclk");
+ if (IS_ERR(icn->refclk)) {
+ ret = PTR_ERR(icn->refclk);
+ DRM_DEV_ERROR(dev, "failed to get REFCLK clock: %d\n", ret);
+ return ret;
+ } else if (icn->refclk) {
+ icn->refclk_rate = clk_get_rate(icn->refclk);
+ if (icn->refclk_rate < 10000000 || icn->refclk_rate > 154000000) {
+ DRM_DEV_ERROR(dev, "REFCLK out of range: %ld Hz\n",
+ icn->refclk_rate);
+ return -EINVAL;
+ }
+ }
+
+ icn->vdd1 = devm_regulator_get_optional(dev, "vdd1");
+ if (IS_ERR(icn->vdd1)) {
+ ret = PTR_ERR(icn->vdd1);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd1 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret);
+ }
+
+ icn->vdd2 = devm_regulator_get_optional(dev, "vdd2");
+ if (IS_ERR(icn->vdd2)) {
+ ret = PTR_ERR(icn->vdd2);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd2 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret);
+ }
+
+ icn->vdd3 = devm_regulator_get_optional(dev, "vdd3");
+ if (IS_ERR(icn->vdd3)) {
+ ret = PTR_ERR(icn->vdd3);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd3 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret);
+ }
+
+ icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(icn->enable_gpio)) {
+ DRM_DEV_ERROR(dev, "failed to get enable GPIO\n");
+ return PTR_ERR(icn->enable_gpio);
+ }
+
+ icn->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+ if (IS_ERR(icn->panel_bridge))
+ return PTR_ERR(icn->panel_bridge);
+
+ return 0;
+}
+
+static int chipone_common_probe(struct device *dev, struct chipone **icnr)
+{
+ struct chipone *icn;
+ int ret;
+
+ icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
+ if (!icn)
+ return -ENOMEM;
+
+ icn->dev = dev;
+
+ ret = chipone_parse_dt(icn);
+ if (ret)
+ return ret;
+
+ icn->bridge.funcs = &chipone_bridge_funcs;
+ icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
+ icn->bridge.of_node = dev->of_node;
+
+ *icnr = icn;
+
+ return ret;
+}
+
+static int chipone_dsi_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct chipone *icn;
+ int ret;
+
+ ret = chipone_common_probe(dev, &icn);
+ if (ret)
+ return ret;
+
+ icn->regmap = devm_regmap_init(dev, &chipone_dsi_regmap_bus,
+ dsi, &chipone_regmap_config);
+ if (IS_ERR(icn->regmap))
+ return PTR_ERR(icn->regmap);
+
+ icn->interface_i2c = false;
+ icn->dsi = dsi;
+
+ mipi_dsi_set_drvdata(dsi, icn);
+
+ drm_bridge_add(&icn->bridge);
+
+ ret = chipone_dsi_attach(icn);
+ if (ret)
+ drm_bridge_remove(&icn->bridge);
+
+ return ret;
+}
+
+static int chipone_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct chipone *icn;
+ int ret;
+
+ ret = chipone_common_probe(dev, &icn);
+ if (ret)
+ return ret;
+
+ icn->regmap = devm_regmap_init_i2c(client, &chipone_regmap_config);
+ if (IS_ERR(icn->regmap))
+ return PTR_ERR(icn->regmap);
+
+ icn->interface_i2c = true;
+ icn->client = client;
+ dev_set_drvdata(dev, icn);
+ i2c_set_clientdata(client, icn);
+
+ drm_bridge_add(&icn->bridge);
+
+ return chipone_dsi_host_attach(icn);
+}
+
+static void chipone_dsi_remove(struct mipi_dsi_device *dsi)
+{
+ struct chipone *icn = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_bridge_remove(&icn->bridge);
+}
+
+static const struct of_device_id chipone_of_match[] = {
+ { .compatible = "chipone,icn6211", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, chipone_of_match);
+
+static struct mipi_dsi_driver chipone_dsi_driver = {
+ .probe = chipone_dsi_probe,
+ .remove = chipone_dsi_remove,
+ .driver = {
+ .name = "chipone-icn6211",
+ .owner = THIS_MODULE,
+ .of_match_table = chipone_of_match,
+ },
+};
+
+static struct i2c_device_id chipone_i2c_id[] = {
+ { "chipone,icn6211" },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, chipone_i2c_id);
+
+static struct i2c_driver chipone_i2c_driver = {
+ .probe = chipone_i2c_probe,
+ .id_table = chipone_i2c_id,
+ .driver = {
+ .name = "chipone-icn6211-i2c",
+ .of_match_table = chipone_of_match,
+ },
+};
+
+static int __init chipone_init(void)
+{
+ if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+ mipi_dsi_driver_register(&chipone_dsi_driver);
+
+ return i2c_add_driver(&chipone_i2c_driver);
+}
+module_init(chipone_init);
+
+static void __exit chipone_exit(void)
+{
+ i2c_del_driver(&chipone_i2c_driver);
+
+ if (IS_ENABLED(CONFIG_DRM_MIPI_DSI))
+ mipi_dsi_driver_unregister(&chipone_dsi_driver);
+}
+module_exit(chipone_exit);
+
+MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>");
+MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge");
+MODULE_LICENSE("GPL");