summaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/sc27xx_adc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc/sc27xx_adc.c')
-rw-r--r--drivers/iio/adc/sc27xx_adc.c965
1 files changed, 965 insertions, 0 deletions
diff --git a/drivers/iio/adc/sc27xx_adc.c b/drivers/iio/adc/sc27xx_adc.c
new file mode 100644
index 000000000..f8421cbba
--- /dev/null
+++ b/drivers/iio/adc/sc27xx_adc.c
@@ -0,0 +1,965 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/hwspinlock.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* PMIC global registers definition */
+#define SC2730_MODULE_EN 0x1808
+#define SC2731_MODULE_EN 0xc08
+#define SC27XX_MODULE_ADC_EN BIT(5)
+#define SC2721_ARM_CLK_EN 0xc0c
+#define SC2730_ARM_CLK_EN 0x180c
+#define SC2731_ARM_CLK_EN 0xc10
+#define SC27XX_CLK_ADC_EN BIT(5)
+#define SC27XX_CLK_ADC_CLK_EN BIT(6)
+
+/* ADC controller registers definition */
+#define SC27XX_ADC_CTL 0x0
+#define SC27XX_ADC_CH_CFG 0x4
+#define SC27XX_ADC_DATA 0x4c
+#define SC27XX_ADC_INT_EN 0x50
+#define SC27XX_ADC_INT_CLR 0x54
+#define SC27XX_ADC_INT_STS 0x58
+#define SC27XX_ADC_INT_RAW 0x5c
+
+/* Bits and mask definition for SC27XX_ADC_CTL register */
+#define SC27XX_ADC_EN BIT(0)
+#define SC27XX_ADC_CHN_RUN BIT(1)
+#define SC27XX_ADC_12BIT_MODE BIT(2)
+#define SC27XX_ADC_RUN_NUM_MASK GENMASK(7, 4)
+#define SC27XX_ADC_RUN_NUM_SHIFT 4
+
+/* Bits and mask definition for SC27XX_ADC_CH_CFG register */
+#define SC27XX_ADC_CHN_ID_MASK GENMASK(4, 0)
+#define SC27XX_ADC_SCALE_MASK GENMASK(10, 9)
+#define SC2721_ADC_SCALE_MASK BIT(5)
+#define SC27XX_ADC_SCALE_SHIFT 9
+#define SC2721_ADC_SCALE_SHIFT 5
+
+/* Bits definitions for SC27XX_ADC_INT_EN registers */
+#define SC27XX_ADC_IRQ_EN BIT(0)
+
+/* Bits definitions for SC27XX_ADC_INT_CLR registers */
+#define SC27XX_ADC_IRQ_CLR BIT(0)
+
+/* Bits definitions for SC27XX_ADC_INT_RAW registers */
+#define SC27XX_ADC_IRQ_RAW BIT(0)
+
+/* Mask definition for SC27XX_ADC_DATA register */
+#define SC27XX_ADC_DATA_MASK GENMASK(11, 0)
+
+/* Timeout (ms) for the trylock of hardware spinlocks */
+#define SC27XX_ADC_HWLOCK_TIMEOUT 5000
+
+/* Timeout (us) for ADC data conversion according to ADC datasheet */
+#define SC27XX_ADC_RDY_TIMEOUT 1000000
+#define SC27XX_ADC_POLL_RAW_STATUS 500
+
+/* Maximum ADC channel number */
+#define SC27XX_ADC_CHANNEL_MAX 32
+
+/* ADC voltage ratio definition */
+#define SC27XX_VOLT_RATIO(n, d) \
+ (((n) << SC27XX_RATIO_NUMERATOR_OFFSET) | (d))
+#define SC27XX_RATIO_NUMERATOR_OFFSET 16
+#define SC27XX_RATIO_DENOMINATOR_MASK GENMASK(15, 0)
+
+/* ADC specific channel reference voltage 3.5V */
+#define SC27XX_ADC_REFVOL_VDD35 3500000
+
+/* ADC default channel reference voltage is 2.8V */
+#define SC27XX_ADC_REFVOL_VDD28 2800000
+
+struct sc27xx_adc_data {
+ struct device *dev;
+ struct regulator *volref;
+ struct regmap *regmap;
+ /*
+ * One hardware spinlock to synchronize between the multiple
+ * subsystems which will access the unique ADC controller.
+ */
+ struct hwspinlock *hwlock;
+ int channel_scale[SC27XX_ADC_CHANNEL_MAX];
+ u32 base;
+ int irq;
+ const struct sc27xx_adc_variant_data *var_data;
+};
+
+/*
+ * Since different PMICs of SC27xx series can have different
+ * address and ratio, we should save ratio config and base
+ * in the device data structure.
+ */
+struct sc27xx_adc_variant_data {
+ u32 module_en;
+ u32 clk_en;
+ u32 scale_shift;
+ u32 scale_mask;
+ const struct sc27xx_adc_linear_graph *bscale_cal;
+ const struct sc27xx_adc_linear_graph *sscale_cal;
+ void (*init_scale)(struct sc27xx_adc_data *data);
+ int (*get_ratio)(int channel, int scale);
+ bool set_volref;
+};
+
+struct sc27xx_adc_linear_graph {
+ int volt0;
+ int adc0;
+ int volt1;
+ int adc1;
+};
+
+/*
+ * According to the datasheet, we can convert one ADC value to one voltage value
+ * through 2 points in the linear graph. If the voltage is less than 1.2v, we
+ * should use the small-scale graph, and if more than 1.2v, we should use the
+ * big-scale graph.
+ */
+static struct sc27xx_adc_linear_graph big_scale_graph = {
+ 4200, 3310,
+ 3600, 2832,
+};
+
+static struct sc27xx_adc_linear_graph small_scale_graph = {
+ 1000, 3413,
+ 100, 341,
+};
+
+static const struct sc27xx_adc_linear_graph sc2731_big_scale_graph_calib = {
+ 4200, 850,
+ 3600, 728,
+};
+
+static const struct sc27xx_adc_linear_graph sc2731_small_scale_graph_calib = {
+ 1000, 838,
+ 100, 84,
+};
+
+static const struct sc27xx_adc_linear_graph big_scale_graph_calib = {
+ 4200, 856,
+ 3600, 733,
+};
+
+static const struct sc27xx_adc_linear_graph small_scale_graph_calib = {
+ 1000, 833,
+ 100, 80,
+};
+
+static int sc27xx_adc_get_calib_data(u32 calib_data, int calib_adc)
+{
+ return ((calib_data & 0xff) + calib_adc - 128) * 4;
+}
+
+/* get the adc nvmem cell calibration data */
+static int adc_nvmem_cell_calib_data(struct sc27xx_adc_data *data, const char *cell_name)
+{
+ struct nvmem_cell *cell;
+ void *buf;
+ u32 origin_calib_data = 0;
+ size_t len;
+
+ if (!data)
+ return -EINVAL;
+
+ cell = nvmem_cell_get(data->dev, cell_name);
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ if (IS_ERR(buf)) {
+ nvmem_cell_put(cell);
+ return PTR_ERR(buf);
+ }
+
+ memcpy(&origin_calib_data, buf, min(len, sizeof(u32)));
+
+ kfree(buf);
+ nvmem_cell_put(cell);
+ return origin_calib_data;
+}
+
+static int sc27xx_adc_scale_calibration(struct sc27xx_adc_data *data,
+ bool big_scale)
+{
+ const struct sc27xx_adc_linear_graph *calib_graph;
+ struct sc27xx_adc_linear_graph *graph;
+ const char *cell_name;
+ u32 calib_data = 0;
+
+ if (big_scale) {
+ calib_graph = data->var_data->bscale_cal;
+ graph = &big_scale_graph;
+ cell_name = "big_scale_calib";
+ } else {
+ calib_graph = data->var_data->sscale_cal;
+ graph = &small_scale_graph;
+ cell_name = "small_scale_calib";
+ }
+
+ calib_data = adc_nvmem_cell_calib_data(data, cell_name);
+
+ /* Only need to calibrate the adc values in the linear graph. */
+ graph->adc0 = sc27xx_adc_get_calib_data(calib_data, calib_graph->adc0);
+ graph->adc1 = sc27xx_adc_get_calib_data(calib_data >> 8,
+ calib_graph->adc1);
+
+ return 0;
+}
+
+static int sc2720_adc_get_ratio(int channel, int scale)
+{
+ switch (channel) {
+ case 14:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(68, 900);
+ case 1:
+ return SC27XX_VOLT_RATIO(68, 1760);
+ case 2:
+ return SC27XX_VOLT_RATIO(68, 2327);
+ case 3:
+ return SC27XX_VOLT_RATIO(68, 3654);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 16:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(48, 100);
+ case 1:
+ return SC27XX_VOLT_RATIO(480, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(480, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(48, 406);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 21:
+ case 22:
+ case 23:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(3, 8);
+ case 1:
+ return SC27XX_VOLT_RATIO(375, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(375, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(300, 3248);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ default:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(1, 1);
+ case 1:
+ return SC27XX_VOLT_RATIO(1000, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(1000, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(100, 406);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ }
+ return SC27XX_VOLT_RATIO(1, 1);
+}
+
+static int sc2721_adc_get_ratio(int channel, int scale)
+{
+ switch (channel) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ return scale ? SC27XX_VOLT_RATIO(400, 1025) :
+ SC27XX_VOLT_RATIO(1, 1);
+ case 5:
+ return SC27XX_VOLT_RATIO(7, 29);
+ case 7:
+ case 9:
+ return scale ? SC27XX_VOLT_RATIO(100, 125) :
+ SC27XX_VOLT_RATIO(1, 1);
+ case 14:
+ return SC27XX_VOLT_RATIO(68, 900);
+ case 16:
+ return SC27XX_VOLT_RATIO(48, 100);
+ case 19:
+ return SC27XX_VOLT_RATIO(1, 3);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ return SC27XX_VOLT_RATIO(1, 1);
+}
+
+static int sc2730_adc_get_ratio(int channel, int scale)
+{
+ switch (channel) {
+ case 14:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(68, 900);
+ case 1:
+ return SC27XX_VOLT_RATIO(68, 1760);
+ case 2:
+ return SC27XX_VOLT_RATIO(68, 2327);
+ case 3:
+ return SC27XX_VOLT_RATIO(68, 3654);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 15:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(1, 3);
+ case 1:
+ return SC27XX_VOLT_RATIO(1000, 5865);
+ case 2:
+ return SC27XX_VOLT_RATIO(500, 3879);
+ case 3:
+ return SC27XX_VOLT_RATIO(500, 6090);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 16:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(48, 100);
+ case 1:
+ return SC27XX_VOLT_RATIO(480, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(480, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(48, 406);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ case 21:
+ case 22:
+ case 23:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(3, 8);
+ case 1:
+ return SC27XX_VOLT_RATIO(375, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(375, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(300, 3248);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ default:
+ switch (scale) {
+ case 0:
+ return SC27XX_VOLT_RATIO(1, 1);
+ case 1:
+ return SC27XX_VOLT_RATIO(1000, 1955);
+ case 2:
+ return SC27XX_VOLT_RATIO(1000, 2586);
+ case 3:
+ return SC27XX_VOLT_RATIO(1000, 4060);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ }
+ return SC27XX_VOLT_RATIO(1, 1);
+}
+
+static int sc2731_adc_get_ratio(int channel, int scale)
+{
+ switch (channel) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ return scale ? SC27XX_VOLT_RATIO(400, 1025) :
+ SC27XX_VOLT_RATIO(1, 1);
+ case 5:
+ return SC27XX_VOLT_RATIO(7, 29);
+ case 6:
+ return SC27XX_VOLT_RATIO(375, 9000);
+ case 7:
+ case 8:
+ return scale ? SC27XX_VOLT_RATIO(100, 125) :
+ SC27XX_VOLT_RATIO(1, 1);
+ case 19:
+ return SC27XX_VOLT_RATIO(1, 3);
+ default:
+ return SC27XX_VOLT_RATIO(1, 1);
+ }
+ return SC27XX_VOLT_RATIO(1, 1);
+}
+
+/*
+ * According to the datasheet set specific value on some channel.
+ */
+static void sc2720_adc_scale_init(struct sc27xx_adc_data *data)
+{
+ int i;
+
+ for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
+ switch (i) {
+ case 5:
+ data->channel_scale[i] = 3;
+ break;
+ case 7:
+ case 9:
+ data->channel_scale[i] = 2;
+ break;
+ case 13:
+ data->channel_scale[i] = 1;
+ break;
+ case 19:
+ case 30:
+ case 31:
+ data->channel_scale[i] = 3;
+ break;
+ default:
+ data->channel_scale[i] = 0;
+ break;
+ }
+ }
+}
+
+static void sc2730_adc_scale_init(struct sc27xx_adc_data *data)
+{
+ int i;
+
+ for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
+ switch (i) {
+ case 5:
+ case 10:
+ case 19:
+ case 30:
+ case 31:
+ data->channel_scale[i] = 3;
+ break;
+ case 7:
+ case 9:
+ data->channel_scale[i] = 2;
+ break;
+ case 13:
+ data->channel_scale[i] = 1;
+ break;
+ default:
+ data->channel_scale[i] = 0;
+ break;
+ }
+ }
+}
+
+static void sc2731_adc_scale_init(struct sc27xx_adc_data *data)
+{
+ int i;
+ /*
+ * In the current software design, SC2731 support 2 scales,
+ * channels 5 uses big scale, others use smale.
+ */
+ for (i = 0; i < SC27XX_ADC_CHANNEL_MAX; i++) {
+ switch (i) {
+ case 5:
+ data->channel_scale[i] = 1;
+ break;
+ default:
+ data->channel_scale[i] = 0;
+ break;
+ }
+ }
+}
+
+static int sc27xx_adc_read(struct sc27xx_adc_data *data, int channel,
+ int scale, int *val)
+{
+ int ret, ret_volref;
+ u32 tmp, value, status;
+
+ ret = hwspin_lock_timeout_raw(data->hwlock, SC27XX_ADC_HWLOCK_TIMEOUT);
+ if (ret) {
+ dev_err(data->dev, "timeout to get the hwspinlock\n");
+ return ret;
+ }
+
+ /*
+ * According to the sc2721 chip data sheet, the reference voltage of
+ * specific channel 30 and channel 31 in ADC module needs to be set from
+ * the default 2.8v to 3.5v.
+ */
+ if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) {
+ ret = regulator_set_voltage(data->volref,
+ SC27XX_ADC_REFVOL_VDD35,
+ SC27XX_ADC_REFVOL_VDD35);
+ if (ret) {
+ dev_err(data->dev, "failed to set the volref 3.5v\n");
+ goto unlock_adc;
+ }
+ }
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
+ SC27XX_ADC_EN, SC27XX_ADC_EN);
+ if (ret)
+ goto regulator_restore;
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_INT_CLR,
+ SC27XX_ADC_IRQ_CLR, SC27XX_ADC_IRQ_CLR);
+ if (ret)
+ goto disable_adc;
+
+ /* Configure the channel id and scale */
+ tmp = (scale << data->var_data->scale_shift) & data->var_data->scale_mask;
+ tmp |= channel & SC27XX_ADC_CHN_ID_MASK;
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CH_CFG,
+ SC27XX_ADC_CHN_ID_MASK |
+ data->var_data->scale_mask,
+ tmp);
+ if (ret)
+ goto disable_adc;
+
+ /* Select 12bit conversion mode, and only sample 1 time */
+ tmp = SC27XX_ADC_12BIT_MODE;
+ tmp |= (0 << SC27XX_ADC_RUN_NUM_SHIFT) & SC27XX_ADC_RUN_NUM_MASK;
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
+ SC27XX_ADC_RUN_NUM_MASK | SC27XX_ADC_12BIT_MODE,
+ tmp);
+ if (ret)
+ goto disable_adc;
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
+ SC27XX_ADC_CHN_RUN, SC27XX_ADC_CHN_RUN);
+ if (ret)
+ goto disable_adc;
+
+ ret = regmap_read_poll_timeout(data->regmap,
+ data->base + SC27XX_ADC_INT_RAW,
+ status, (status & SC27XX_ADC_IRQ_RAW),
+ SC27XX_ADC_POLL_RAW_STATUS,
+ SC27XX_ADC_RDY_TIMEOUT);
+ if (ret) {
+ dev_err(data->dev, "read adc timeout, status = 0x%x\n", status);
+ goto disable_adc;
+ }
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_ADC_DATA, &value);
+ if (ret)
+ goto disable_adc;
+
+ value &= SC27XX_ADC_DATA_MASK;
+
+disable_adc:
+ regmap_update_bits(data->regmap, data->base + SC27XX_ADC_CTL,
+ SC27XX_ADC_EN, 0);
+regulator_restore:
+ if ((data->var_data->set_volref) && (channel == 30 || channel == 31)) {
+ ret_volref = regulator_set_voltage(data->volref,
+ SC27XX_ADC_REFVOL_VDD28,
+ SC27XX_ADC_REFVOL_VDD28);
+ if (ret_volref) {
+ dev_err(data->dev, "failed to set the volref 2.8v,ret_volref = 0x%x\n",
+ ret_volref);
+ ret = ret || ret_volref;
+ }
+ }
+unlock_adc:
+ hwspin_unlock_raw(data->hwlock);
+
+ if (!ret)
+ *val = value;
+
+ return ret;
+}
+
+static void sc27xx_adc_volt_ratio(struct sc27xx_adc_data *data, int channel, int scale,
+ struct u32_fract *fract)
+{
+ u32 ratio;
+
+ ratio = data->var_data->get_ratio(channel, scale);
+ fract->numerator = ratio >> SC27XX_RATIO_NUMERATOR_OFFSET;
+ fract->denominator = ratio & SC27XX_RATIO_DENOMINATOR_MASK;
+}
+
+static int adc_to_volt(struct sc27xx_adc_linear_graph *graph,
+ int raw_adc)
+{
+ int tmp;
+
+ tmp = (graph->volt0 - graph->volt1) * (raw_adc - graph->adc1);
+ tmp /= (graph->adc0 - graph->adc1);
+ tmp += graph->volt1;
+
+ return tmp;
+}
+
+static int sc27xx_adc_to_volt(struct sc27xx_adc_linear_graph *graph,
+ int raw_adc)
+{
+ int tmp;
+
+ tmp = adc_to_volt(graph, raw_adc);
+
+ return tmp < 0 ? 0 : tmp;
+}
+
+static int sc27xx_adc_convert_volt(struct sc27xx_adc_data *data, int channel,
+ int scale, int raw_adc)
+{
+ struct u32_fract fract;
+ u32 volt;
+
+ /*
+ * Convert ADC values to voltage values according to the linear graph,
+ * and channel 5 and channel 1 has been calibrated, so we can just
+ * return the voltage values calculated by the linear graph. But other
+ * channels need be calculated to the real voltage values with the
+ * voltage ratio.
+ */
+ switch (channel) {
+ case 5:
+ return sc27xx_adc_to_volt(&big_scale_graph, raw_adc);
+
+ case 1:
+ return sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
+
+ default:
+ volt = sc27xx_adc_to_volt(&small_scale_graph, raw_adc);
+ break;
+ }
+
+ sc27xx_adc_volt_ratio(data, channel, scale, &fract);
+
+ return DIV_ROUND_CLOSEST(volt * fract.denominator, fract.numerator);
+}
+
+static int sc27xx_adc_read_processed(struct sc27xx_adc_data *data,
+ int channel, int scale, int *val)
+{
+ int ret, raw_adc;
+
+ ret = sc27xx_adc_read(data, channel, scale, &raw_adc);
+ if (ret)
+ return ret;
+
+ *val = sc27xx_adc_convert_volt(data, channel, scale, raw_adc);
+ return 0;
+}
+
+static int sc27xx_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct sc27xx_adc_data *data = iio_priv(indio_dev);
+ int scale = data->channel_scale[chan->channel];
+ int ret, tmp;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ ret = sc27xx_adc_read(data, chan->channel, scale, &tmp);
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret)
+ return ret;
+
+ *val = tmp;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_PROCESSED:
+ mutex_lock(&indio_dev->mlock);
+ ret = sc27xx_adc_read_processed(data, chan->channel, scale,
+ &tmp);
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret)
+ return ret;
+
+ *val = tmp;
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = scale;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int sc27xx_adc_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct sc27xx_adc_data *data = iio_priv(indio_dev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ data->channel_scale[chan->channel] = val;
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info sc27xx_info = {
+ .read_raw = &sc27xx_adc_read_raw,
+ .write_raw = &sc27xx_adc_write_raw,
+};
+
+#define SC27XX_ADC_CHANNEL(index, mask) { \
+ .type = IIO_VOLTAGE, \
+ .channel = index, \
+ .info_mask_separate = mask | BIT(IIO_CHAN_INFO_SCALE), \
+ .datasheet_name = "CH##index", \
+ .indexed = 1, \
+}
+
+static const struct iio_chan_spec sc27xx_channels[] = {
+ SC27XX_ADC_CHANNEL(0, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(1, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(2, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(3, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(4, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(5, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(6, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(7, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(8, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(9, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(10, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(11, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(12, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(13, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(14, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(15, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(16, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(17, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(18, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(19, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(20, BIT(IIO_CHAN_INFO_RAW)),
+ SC27XX_ADC_CHANNEL(21, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(22, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(23, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(24, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(25, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(26, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(27, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(28, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(29, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(30, BIT(IIO_CHAN_INFO_PROCESSED)),
+ SC27XX_ADC_CHANNEL(31, BIT(IIO_CHAN_INFO_PROCESSED)),
+};
+
+static int sc27xx_adc_enable(struct sc27xx_adc_data *data)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, data->var_data->module_en,
+ SC27XX_MODULE_ADC_EN, SC27XX_MODULE_ADC_EN);
+ if (ret)
+ return ret;
+
+ /* Enable ADC work clock and controller clock */
+ ret = regmap_update_bits(data->regmap, data->var_data->clk_en,
+ SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN,
+ SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN);
+ if (ret)
+ goto disable_adc;
+
+ /* ADC channel scales' calibration from nvmem device */
+ ret = sc27xx_adc_scale_calibration(data, true);
+ if (ret)
+ goto disable_clk;
+
+ ret = sc27xx_adc_scale_calibration(data, false);
+ if (ret)
+ goto disable_clk;
+
+ return 0;
+
+disable_clk:
+ regmap_update_bits(data->regmap, data->var_data->clk_en,
+ SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
+disable_adc:
+ regmap_update_bits(data->regmap, data->var_data->module_en,
+ SC27XX_MODULE_ADC_EN, 0);
+
+ return ret;
+}
+
+static void sc27xx_adc_disable(void *_data)
+{
+ struct sc27xx_adc_data *data = _data;
+
+ /* Disable ADC work clock and controller clock */
+ regmap_update_bits(data->regmap, data->var_data->clk_en,
+ SC27XX_CLK_ADC_EN | SC27XX_CLK_ADC_CLK_EN, 0);
+
+ regmap_update_bits(data->regmap, data->var_data->module_en,
+ SC27XX_MODULE_ADC_EN, 0);
+}
+
+static const struct sc27xx_adc_variant_data sc2731_data = {
+ .module_en = SC2731_MODULE_EN,
+ .clk_en = SC2731_ARM_CLK_EN,
+ .scale_shift = SC27XX_ADC_SCALE_SHIFT,
+ .scale_mask = SC27XX_ADC_SCALE_MASK,
+ .bscale_cal = &sc2731_big_scale_graph_calib,
+ .sscale_cal = &sc2731_small_scale_graph_calib,
+ .init_scale = sc2731_adc_scale_init,
+ .get_ratio = sc2731_adc_get_ratio,
+ .set_volref = false,
+};
+
+static const struct sc27xx_adc_variant_data sc2730_data = {
+ .module_en = SC2730_MODULE_EN,
+ .clk_en = SC2730_ARM_CLK_EN,
+ .scale_shift = SC27XX_ADC_SCALE_SHIFT,
+ .scale_mask = SC27XX_ADC_SCALE_MASK,
+ .bscale_cal = &big_scale_graph_calib,
+ .sscale_cal = &small_scale_graph_calib,
+ .init_scale = sc2730_adc_scale_init,
+ .get_ratio = sc2730_adc_get_ratio,
+ .set_volref = false,
+};
+
+static const struct sc27xx_adc_variant_data sc2721_data = {
+ .module_en = SC2731_MODULE_EN,
+ .clk_en = SC2721_ARM_CLK_EN,
+ .scale_shift = SC2721_ADC_SCALE_SHIFT,
+ .scale_mask = SC2721_ADC_SCALE_MASK,
+ .bscale_cal = &sc2731_big_scale_graph_calib,
+ .sscale_cal = &sc2731_small_scale_graph_calib,
+ .init_scale = sc2731_adc_scale_init,
+ .get_ratio = sc2721_adc_get_ratio,
+ .set_volref = true,
+};
+
+static const struct sc27xx_adc_variant_data sc2720_data = {
+ .module_en = SC2731_MODULE_EN,
+ .clk_en = SC2721_ARM_CLK_EN,
+ .scale_shift = SC27XX_ADC_SCALE_SHIFT,
+ .scale_mask = SC27XX_ADC_SCALE_MASK,
+ .bscale_cal = &big_scale_graph_calib,
+ .sscale_cal = &small_scale_graph_calib,
+ .init_scale = sc2720_adc_scale_init,
+ .get_ratio = sc2720_adc_get_ratio,
+ .set_volref = false,
+};
+
+static int sc27xx_adc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct sc27xx_adc_data *sc27xx_data;
+ const struct sc27xx_adc_variant_data *pdata;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ pdata = of_device_get_match_data(dev);
+ if (!pdata) {
+ dev_err(dev, "No matching driver data found\n");
+ return -EINVAL;
+ }
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*sc27xx_data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ sc27xx_data = iio_priv(indio_dev);
+
+ sc27xx_data->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!sc27xx_data->regmap) {
+ dev_err(dev, "failed to get ADC regmap\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(np, "reg", &sc27xx_data->base);
+ if (ret) {
+ dev_err(dev, "failed to get ADC base address\n");
+ return ret;
+ }
+
+ sc27xx_data->irq = platform_get_irq(pdev, 0);
+ if (sc27xx_data->irq < 0)
+ return sc27xx_data->irq;
+
+ ret = of_hwspin_lock_get_id(np, 0);
+ if (ret < 0) {
+ dev_err(dev, "failed to get hwspinlock id\n");
+ return ret;
+ }
+
+ sc27xx_data->hwlock = devm_hwspin_lock_request_specific(dev, ret);
+ if (!sc27xx_data->hwlock) {
+ dev_err(dev, "failed to request hwspinlock\n");
+ return -ENXIO;
+ }
+
+ sc27xx_data->dev = dev;
+ if (pdata->set_volref) {
+ sc27xx_data->volref = devm_regulator_get(dev, "vref");
+ if (IS_ERR(sc27xx_data->volref)) {
+ ret = PTR_ERR(sc27xx_data->volref);
+ return dev_err_probe(dev, ret, "failed to get ADC volref\n");
+ }
+ }
+
+ sc27xx_data->var_data = pdata;
+ sc27xx_data->var_data->init_scale(sc27xx_data);
+
+ ret = sc27xx_adc_enable(sc27xx_data);
+ if (ret) {
+ dev_err(dev, "failed to enable ADC module\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, sc27xx_adc_disable, sc27xx_data);
+ if (ret) {
+ dev_err(dev, "failed to add ADC disable action\n");
+ return ret;
+ }
+
+ indio_dev->name = dev_name(dev);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &sc27xx_info;
+ indio_dev->channels = sc27xx_channels;
+ indio_dev->num_channels = ARRAY_SIZE(sc27xx_channels);
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ dev_err(dev, "could not register iio (ADC)");
+
+ return ret;
+}
+
+static const struct of_device_id sc27xx_adc_of_match[] = {
+ { .compatible = "sprd,sc2731-adc", .data = &sc2731_data},
+ { .compatible = "sprd,sc2730-adc", .data = &sc2730_data},
+ { .compatible = "sprd,sc2721-adc", .data = &sc2721_data},
+ { .compatible = "sprd,sc2720-adc", .data = &sc2720_data},
+ { }
+};
+MODULE_DEVICE_TABLE(of, sc27xx_adc_of_match);
+
+static struct platform_driver sc27xx_adc_driver = {
+ .probe = sc27xx_adc_probe,
+ .driver = {
+ .name = "sc27xx-adc",
+ .of_match_table = sc27xx_adc_of_match,
+ },
+};
+
+module_platform_driver(sc27xx_adc_driver);
+
+MODULE_AUTHOR("Freeman Liu <freeman.liu@spreadtrum.com>");
+MODULE_DESCRIPTION("Spreadtrum SC27XX ADC Driver");
+MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 23:34:31 +0000