summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/atmel-mci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/atmel-mci.c')
-rw-r--r--drivers/mmc/host/atmel-mci.c2679
1 files changed, 2679 insertions, 0 deletions
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
new file mode 100644
index 000000000..dd18440a9
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci.c
@@ -0,0 +1,2679 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
+ * Copyright (C) 2004-2008 Atmel Corporation
+ */
+#include <linux/blkdev.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/scatterlist.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/types.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
+
+#include <linux/atmel-mci.h>
+#include <linux/atmel_pdc.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm/unaligned.h>
+
+/*
+ * Superset of MCI IP registers integrated in Atmel AT91 Processor
+ * Registers and bitfields marked with [2] are only available in MCI2
+ */
+
+/* MCI Register Definitions */
+#define ATMCI_CR 0x0000 /* Control */
+#define ATMCI_CR_MCIEN BIT(0) /* MCI Enable */
+#define ATMCI_CR_MCIDIS BIT(1) /* MCI Disable */
+#define ATMCI_CR_PWSEN BIT(2) /* Power Save Enable */
+#define ATMCI_CR_PWSDIS BIT(3) /* Power Save Disable */
+#define ATMCI_CR_SWRST BIT(7) /* Software Reset */
+#define ATMCI_MR 0x0004 /* Mode */
+#define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */
+#define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */
+#define ATMCI_MR_RDPROOF BIT(11) /* Read Proof */
+#define ATMCI_MR_WRPROOF BIT(12) /* Write Proof */
+#define ATMCI_MR_PDCFBYTE BIT(13) /* Force Byte Transfer */
+#define ATMCI_MR_PDCPADV BIT(14) /* Padding Value */
+#define ATMCI_MR_PDCMODE BIT(15) /* PDC-oriented Mode */
+#define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */
+#define ATMCI_DTOR 0x0008 /* Data Timeout */
+#define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */
+#define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */
+#define ATMCI_SDCR 0x000c /* SD Card / SDIO */
+#define ATMCI_SDCSEL_SLOT_A (0 << 0) /* Select SD slot A */
+#define ATMCI_SDCSEL_SLOT_B (1 << 0) /* Select SD slot A */
+#define ATMCI_SDCSEL_MASK (3 << 0)
+#define ATMCI_SDCBUS_1BIT (0 << 6) /* 1-bit data bus */
+#define ATMCI_SDCBUS_4BIT (2 << 6) /* 4-bit data bus */
+#define ATMCI_SDCBUS_8BIT (3 << 6) /* 8-bit data bus[2] */
+#define ATMCI_SDCBUS_MASK (3 << 6)
+#define ATMCI_ARGR 0x0010 /* Command Argument */
+#define ATMCI_CMDR 0x0014 /* Command */
+#define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
+#define ATMCI_CMDR_RSPTYP_NONE (0 << 6) /* No response */
+#define ATMCI_CMDR_RSPTYP_48BIT (1 << 6) /* 48-bit response */
+#define ATMCI_CMDR_RSPTYP_136BIT (2 << 6) /* 136-bit response */
+#define ATMCI_CMDR_SPCMD_INIT (1 << 8) /* Initialization command */
+#define ATMCI_CMDR_SPCMD_SYNC (2 << 8) /* Synchronized command */
+#define ATMCI_CMDR_SPCMD_INT (4 << 8) /* Interrupt command */
+#define ATMCI_CMDR_SPCMD_INTRESP (5 << 8) /* Interrupt response */
+#define ATMCI_CMDR_OPDCMD (1 << 11) /* Open Drain */
+#define ATMCI_CMDR_MAXLAT_5CYC (0 << 12) /* Max latency 5 cycles */
+#define ATMCI_CMDR_MAXLAT_64CYC (1 << 12) /* Max latency 64 cycles */
+#define ATMCI_CMDR_START_XFER (1 << 16) /* Start data transfer */
+#define ATMCI_CMDR_STOP_XFER (2 << 16) /* Stop data transfer */
+#define ATMCI_CMDR_TRDIR_WRITE (0 << 18) /* Write data */
+#define ATMCI_CMDR_TRDIR_READ (1 << 18) /* Read data */
+#define ATMCI_CMDR_BLOCK (0 << 19) /* Single-block transfer */
+#define ATMCI_CMDR_MULTI_BLOCK (1 << 19) /* Multi-block transfer */
+#define ATMCI_CMDR_STREAM (2 << 19) /* MMC Stream transfer */
+#define ATMCI_CMDR_SDIO_BYTE (4 << 19) /* SDIO Byte transfer */
+#define ATMCI_CMDR_SDIO_BLOCK (5 << 19) /* SDIO Block transfer */
+#define ATMCI_CMDR_SDIO_SUSPEND (1 << 24) /* SDIO Suspend Command */
+#define ATMCI_CMDR_SDIO_RESUME (2 << 24) /* SDIO Resume Command */
+#define ATMCI_BLKR 0x0018 /* Block */
+#define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */
+#define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */
+#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */
+#define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */
+#define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */
+#define ATMCI_RSPR 0x0020 /* Response 0 */
+#define ATMCI_RSPR1 0x0024 /* Response 1 */
+#define ATMCI_RSPR2 0x0028 /* Response 2 */
+#define ATMCI_RSPR3 0x002c /* Response 3 */
+#define ATMCI_RDR 0x0030 /* Receive Data */
+#define ATMCI_TDR 0x0034 /* Transmit Data */
+#define ATMCI_SR 0x0040 /* Status */
+#define ATMCI_IER 0x0044 /* Interrupt Enable */
+#define ATMCI_IDR 0x0048 /* Interrupt Disable */
+#define ATMCI_IMR 0x004c /* Interrupt Mask */
+#define ATMCI_CMDRDY BIT(0) /* Command Ready */
+#define ATMCI_RXRDY BIT(1) /* Receiver Ready */
+#define ATMCI_TXRDY BIT(2) /* Transmitter Ready */
+#define ATMCI_BLKE BIT(3) /* Data Block Ended */
+#define ATMCI_DTIP BIT(4) /* Data Transfer In Progress */
+#define ATMCI_NOTBUSY BIT(5) /* Data Not Busy */
+#define ATMCI_ENDRX BIT(6) /* End of RX Buffer */
+#define ATMCI_ENDTX BIT(7) /* End of TX Buffer */
+#define ATMCI_SDIOIRQA BIT(8) /* SDIO IRQ in slot A */
+#define ATMCI_SDIOIRQB BIT(9) /* SDIO IRQ in slot B */
+#define ATMCI_SDIOWAIT BIT(12) /* SDIO Read Wait Operation Status */
+#define ATMCI_CSRCV BIT(13) /* CE-ATA Completion Signal Received */
+#define ATMCI_RXBUFF BIT(14) /* RX Buffer Full */
+#define ATMCI_TXBUFE BIT(15) /* TX Buffer Empty */
+#define ATMCI_RINDE BIT(16) /* Response Index Error */
+#define ATMCI_RDIRE BIT(17) /* Response Direction Error */
+#define ATMCI_RCRCE BIT(18) /* Response CRC Error */
+#define ATMCI_RENDE BIT(19) /* Response End Bit Error */
+#define ATMCI_RTOE BIT(20) /* Response Time-Out Error */
+#define ATMCI_DCRCE BIT(21) /* Data CRC Error */
+#define ATMCI_DTOE BIT(22) /* Data Time-Out Error */
+#define ATMCI_CSTOE BIT(23) /* Completion Signal Time-out Error */
+#define ATMCI_BLKOVRE BIT(24) /* DMA Block Overrun Error */
+#define ATMCI_DMADONE BIT(25) /* DMA Transfer Done */
+#define ATMCI_FIFOEMPTY BIT(26) /* FIFO Empty Flag */
+#define ATMCI_XFRDONE BIT(27) /* Transfer Done Flag */
+#define ATMCI_ACKRCV BIT(28) /* Boot Operation Acknowledge Received */
+#define ATMCI_ACKRCVE BIT(29) /* Boot Operation Acknowledge Error */
+#define ATMCI_OVRE BIT(30) /* RX Overrun Error */
+#define ATMCI_UNRE BIT(31) /* TX Underrun Error */
+#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */
+#define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */
+#define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */
+#define ATMCI_DMAEN BIT(8) /* DMA Hardware Handshaking Enable */
+#define ATMCI_CFG 0x0054 /* Configuration[2] */
+#define ATMCI_CFG_FIFOMODE_1DATA BIT(0) /* MCI Internal FIFO control mode */
+#define ATMCI_CFG_FERRCTRL_COR BIT(4) /* Flow Error flag reset control mode */
+#define ATMCI_CFG_HSMODE BIT(8) /* High Speed Mode */
+#define ATMCI_CFG_LSYNC BIT(12) /* Synchronize on the last block */
+#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */
+#define ATMCI_WP_EN BIT(0) /* WP Enable */
+#define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */
+#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */
+#define ATMCI_GET_WP_VS(x) ((x) & 0x0f)
+#define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff)
+#define ATMCI_VERSION 0x00FC /* Version */
+#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */
+
+/* This is not including the FIFO Aperture on MCI2 */
+#define ATMCI_REGS_SIZE 0x100
+
+/* Register access macros */
+#define atmci_readl(port, reg) \
+ __raw_readl((port)->regs + reg)
+#define atmci_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + reg)
+
+#define ATMCI_CMD_TIMEOUT_MS 2000
+#define AUTOSUSPEND_DELAY 50
+
+#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
+#define ATMCI_DMA_THRESHOLD 16
+
+enum {
+ EVENT_CMD_RDY = 0,
+ EVENT_XFER_COMPLETE,
+ EVENT_NOTBUSY,
+ EVENT_DATA_ERROR,
+};
+
+enum atmel_mci_state {
+ STATE_IDLE = 0,
+ STATE_SENDING_CMD,
+ STATE_DATA_XFER,
+ STATE_WAITING_NOTBUSY,
+ STATE_SENDING_STOP,
+ STATE_END_REQUEST,
+};
+
+enum atmci_xfer_dir {
+ XFER_RECEIVE = 0,
+ XFER_TRANSMIT,
+};
+
+enum atmci_pdc_buf {
+ PDC_FIRST_BUF = 0,
+ PDC_SECOND_BUF,
+};
+
+struct atmel_mci_caps {
+ bool has_dma_conf_reg;
+ bool has_pdc;
+ bool has_cfg_reg;
+ bool has_cstor_reg;
+ bool has_highspeed;
+ bool has_rwproof;
+ bool has_odd_clk_div;
+ bool has_bad_data_ordering;
+ bool need_reset_after_xfer;
+ bool need_blksz_mul_4;
+ bool need_notbusy_for_read_ops;
+};
+
+struct atmel_mci_dma {
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *data_desc;
+};
+
+/**
+ * struct atmel_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @regs: Pointer to MMIO registers.
+ * @sg: Scatterlist entry currently being processed by PIO or PDC code.
+ * @sg_len: Size of the scatterlist
+ * @pio_offset: Offset into the current scatterlist entry.
+ * @buffer: Buffer used if we don't have the r/w proof capability. We
+ * don't have the time to switch pdc buffers so we have to use only
+ * one buffer for the full transaction.
+ * @buf_size: size of the buffer.
+ * @buf_phys_addr: buffer address needed for pdc.
+ * @cur_slot: The slot which is currently using the controller.
+ * @mrq: The request currently being processed on @cur_slot,
+ * or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ * transfer is in progress.
+ * @data_size: just data->blocks * data->blksz.
+ * @dma: DMA client state.
+ * @data_chan: DMA channel being used for the current data transfer.
+ * @dma_conf: Configuration for the DMA slave
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ * command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @data_status: Snapshot of SR taken upon completion of the current
+ * data transfer. Only valid when EVENT_DATA_COMPLETE or
+ * EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ * to be sent.
+ * @tasklet: Tasklet running the request state machine.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ * to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ * processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @need_clock_update: Update the clock rate before the next request.
+ * @need_reset: Reset controller before next request.
+ * @timer: Timer to balance the data timeout error flag which cannot rise.
+ * @mode_reg: Value of the MR register.
+ * @cfg_reg: Value of the CFG register.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ * rate and timeout calculations.
+ * @mapbase: Physical address of the MMIO registers.
+ * @mck: The peripheral bus clock hooked up to the MMC controller.
+ * @pdev: Platform device associated with the MMC controller.
+ * @slot: Slots sharing this MMC controller.
+ * @caps: MCI capabilities depending on MCI version.
+ * @prepare_data: function to setup MCI before data transfer which
+ * depends on MCI capabilities.
+ * @submit_data: function to start data transfer which depends on MCI
+ * capabilities.
+ * @stop_transfer: function to stop data transfer which depends on MCI
+ * capabilities.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @cur_slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ *
+ * @lock also protects mode_reg and need_clock_update since these are
+ * used to synchronize mode register updates with the queue
+ * processing.
+ *
+ * The @mrq field of struct atmel_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct atmel_mci {
+ spinlock_t lock;
+ void __iomem *regs;
+
+ struct scatterlist *sg;
+ unsigned int sg_len;
+ unsigned int pio_offset;
+ unsigned int *buffer;
+ unsigned int buf_size;
+ dma_addr_t buf_phys_addr;
+
+ struct atmel_mci_slot *cur_slot;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ unsigned int data_size;
+
+ struct atmel_mci_dma dma;
+ struct dma_chan *data_chan;
+ struct dma_slave_config dma_conf;
+
+ u32 cmd_status;
+ u32 data_status;
+ u32 stop_cmdr;
+
+ struct tasklet_struct tasklet;
+ unsigned long pending_events;
+ unsigned long completed_events;
+ enum atmel_mci_state state;
+ struct list_head queue;
+
+ bool need_clock_update;
+ bool need_reset;
+ struct timer_list timer;
+ u32 mode_reg;
+ u32 cfg_reg;
+ unsigned long bus_hz;
+ unsigned long mapbase;
+ struct clk *mck;
+ struct platform_device *pdev;
+
+ struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS];
+
+ struct atmel_mci_caps caps;
+
+ u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data);
+ void (*submit_data)(struct atmel_mci *host, struct mmc_data *data);
+ void (*stop_transfer)(struct atmel_mci *host);
+};
+
+/**
+ * struct atmel_mci_slot - MMC slot state
+ * @mmc: The mmc_host representing this slot.
+ * @host: The MMC controller this slot is using.
+ * @sdc_reg: Value of SDCR to be written before using this slot.
+ * @sdio_irq: SDIO irq mask for this slot.
+ * @mrq: mmc_request currently being processed or waiting to be
+ * processed, or NULL when the slot is idle.
+ * @queue_node: List node for placing this node in the @queue list of
+ * &struct atmel_mci.
+ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
+ * @flags: Random state bits associated with the slot.
+ * @detect_pin: GPIO pin used for card detection, or negative if not
+ * available.
+ * @wp_pin: GPIO pin used for card write protect sending, or negative
+ * if not available.
+ * @detect_is_active_high: The state of the detect pin when it is active.
+ * @detect_timer: Timer used for debouncing @detect_pin interrupts.
+ */
+struct atmel_mci_slot {
+ struct mmc_host *mmc;
+ struct atmel_mci *host;
+
+ u32 sdc_reg;
+ u32 sdio_irq;
+
+ struct mmc_request *mrq;
+ struct list_head queue_node;
+
+ unsigned int clock;
+ unsigned long flags;
+#define ATMCI_CARD_PRESENT 0
+#define ATMCI_CARD_NEED_INIT 1
+#define ATMCI_SHUTDOWN 2
+
+ int detect_pin;
+ int wp_pin;
+ bool detect_is_active_high;
+
+ struct timer_list detect_timer;
+};
+
+#define atmci_test_and_clear_pending(host, event) \
+ test_and_clear_bit(event, &host->pending_events)
+#define atmci_set_completed(host, event) \
+ set_bit(event, &host->completed_events)
+#define atmci_set_pending(host, event) \
+ set_bit(event, &host->pending_events)
+
+/*
+ * The debugfs stuff below is mostly optimized away when
+ * CONFIG_DEBUG_FS is not set.
+ */
+static int atmci_req_show(struct seq_file *s, void *v)
+{
+ struct atmel_mci_slot *slot = s->private;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_command *stop;
+ struct mmc_data *data;
+
+ /* Make sure we get a consistent snapshot */
+ spin_lock_bh(&slot->host->lock);
+ mrq = slot->mrq;
+
+ if (mrq) {
+ cmd = mrq->cmd;
+ data = mrq->data;
+ stop = mrq->stop;
+
+ if (cmd)
+ seq_printf(s,
+ "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+ cmd->opcode, cmd->arg, cmd->flags,
+ cmd->resp[0], cmd->resp[1], cmd->resp[2],
+ cmd->resp[3], cmd->error);
+ if (data)
+ seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
+ data->bytes_xfered, data->blocks,
+ data->blksz, data->flags, data->error);
+ if (stop)
+ seq_printf(s,
+ "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
+ stop->opcode, stop->arg, stop->flags,
+ stop->resp[0], stop->resp[1], stop->resp[2],
+ stop->resp[3], stop->error);
+ }
+
+ spin_unlock_bh(&slot->host->lock);
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(atmci_req);
+
+static void atmci_show_status_reg(struct seq_file *s,
+ const char *regname, u32 value)
+{
+ static const char *sr_bit[] = {
+ [0] = "CMDRDY",
+ [1] = "RXRDY",
+ [2] = "TXRDY",
+ [3] = "BLKE",
+ [4] = "DTIP",
+ [5] = "NOTBUSY",
+ [6] = "ENDRX",
+ [7] = "ENDTX",
+ [8] = "SDIOIRQA",
+ [9] = "SDIOIRQB",
+ [12] = "SDIOWAIT",
+ [14] = "RXBUFF",
+ [15] = "TXBUFE",
+ [16] = "RINDE",
+ [17] = "RDIRE",
+ [18] = "RCRCE",
+ [19] = "RENDE",
+ [20] = "RTOE",
+ [21] = "DCRCE",
+ [22] = "DTOE",
+ [23] = "CSTOE",
+ [24] = "BLKOVRE",
+ [25] = "DMADONE",
+ [26] = "FIFOEMPTY",
+ [27] = "XFRDONE",
+ [30] = "OVRE",
+ [31] = "UNRE",
+ };
+ unsigned int i;
+
+ seq_printf(s, "%s:\t0x%08x", regname, value);
+ for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
+ if (value & (1 << i)) {
+ if (sr_bit[i])
+ seq_printf(s, " %s", sr_bit[i]);
+ else
+ seq_puts(s, " UNKNOWN");
+ }
+ }
+ seq_putc(s, '\n');
+}
+
+static int atmci_regs_show(struct seq_file *s, void *v)
+{
+ struct atmel_mci *host = s->private;
+ u32 *buf;
+ int ret = 0;
+
+
+ buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ pm_runtime_get_sync(&host->pdev->dev);
+
+ /*
+ * Grab a more or less consistent snapshot. Note that we're
+ * not disabling interrupts, so IMR and SR may not be
+ * consistent.
+ */
+ spin_lock_bh(&host->lock);
+ memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
+ spin_unlock_bh(&host->lock);
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
+
+ seq_printf(s, "MR:\t0x%08x%s%s ",
+ buf[ATMCI_MR / 4],
+ buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "",
+ buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "");
+ if (host->caps.has_odd_clk_div)
+ seq_printf(s, "{CLKDIV,CLKODD}=%u\n",
+ ((buf[ATMCI_MR / 4] & 0xff) << 1)
+ | ((buf[ATMCI_MR / 4] >> 16) & 1));
+ else
+ seq_printf(s, "CLKDIV=%u\n",
+ (buf[ATMCI_MR / 4] & 0xff));
+ seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]);
+ seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]);
+ seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]);
+ seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
+ buf[ATMCI_BLKR / 4],
+ buf[ATMCI_BLKR / 4] & 0xffff,
+ (buf[ATMCI_BLKR / 4] >> 16) & 0xffff);
+ if (host->caps.has_cstor_reg)
+ seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]);
+
+ /* Don't read RSPR and RDR; it will consume the data there */
+
+ atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]);
+ atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]);
+
+ if (host->caps.has_dma_conf_reg) {
+ u32 val;
+
+ val = buf[ATMCI_DMA / 4];
+ seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n",
+ val, val & 3,
+ ((val >> 4) & 3) ?
+ 1 << (((val >> 4) & 3) + 1) : 1,
+ val & ATMCI_DMAEN ? " DMAEN" : "");
+ }
+ if (host->caps.has_cfg_reg) {
+ u32 val;
+
+ val = buf[ATMCI_CFG / 4];
+ seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n",
+ val,
+ val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "",
+ val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "",
+ val & ATMCI_CFG_HSMODE ? " HSMODE" : "",
+ val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
+ }
+
+ kfree(buf);
+
+ return ret;
+}
+
+DEFINE_SHOW_ATTRIBUTE(atmci_regs);
+
+static void atmci_init_debugfs(struct atmel_mci_slot *slot)
+{
+ struct mmc_host *mmc = slot->mmc;
+ struct atmel_mci *host = slot->host;
+ struct dentry *root;
+
+ root = mmc->debugfs_root;
+ if (!root)
+ return;
+
+ debugfs_create_file("regs", S_IRUSR, root, host, &atmci_regs_fops);
+ debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops);
+ debugfs_create_u32("state", S_IRUSR, root, &host->state);
+ debugfs_create_xul("pending_events", S_IRUSR, root,
+ &host->pending_events);
+ debugfs_create_xul("completed_events", S_IRUSR, root,
+ &host->completed_events);
+}
+
+#if defined(CONFIG_OF)
+static const struct of_device_id atmci_dt_ids[] = {
+ { .compatible = "atmel,hsmci" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmci_dt_ids);
+
+static struct mci_platform_data*
+atmci_of_init(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *cnp;
+ struct mci_platform_data *pdata;
+ u32 slot_id;
+
+ if (!np) {
+ dev_err(&pdev->dev, "device node not found\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ for_each_child_of_node(np, cnp) {
+ if (of_property_read_u32(cnp, "reg", &slot_id)) {
+ dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
+ cnp);
+ continue;
+ }
+
+ if (slot_id >= ATMCI_MAX_NR_SLOTS) {
+ dev_warn(&pdev->dev, "can't have more than %d slots\n",
+ ATMCI_MAX_NR_SLOTS);
+ of_node_put(cnp);
+ break;
+ }
+
+ if (of_property_read_u32(cnp, "bus-width",
+ &pdata->slot[slot_id].bus_width))
+ pdata->slot[slot_id].bus_width = 1;
+
+ pdata->slot[slot_id].detect_pin =
+ of_get_named_gpio(cnp, "cd-gpios", 0);
+
+ pdata->slot[slot_id].detect_is_active_high =
+ of_property_read_bool(cnp, "cd-inverted");
+
+ pdata->slot[slot_id].non_removable =
+ of_property_read_bool(cnp, "non-removable");
+
+ pdata->slot[slot_id].wp_pin =
+ of_get_named_gpio(cnp, "wp-gpios", 0);
+ }
+
+ return pdata;
+}
+#else /* CONFIG_OF */
+static inline struct mci_platform_data*
+atmci_of_init(struct platform_device *dev)
+{
+ return ERR_PTR(-EINVAL);
+}
+#endif
+
+static inline unsigned int atmci_get_version(struct atmel_mci *host)
+{
+ return atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
+}
+
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2,
+ * 8 -> 3, 16 -> 4.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(struct atmel_mci *host,
+ unsigned int maxburst)
+{
+ unsigned int version = atmci_get_version(host);
+ unsigned int offset = 2;
+
+ if (version >= 0x600)
+ offset = 1;
+
+ if (maxburst > 1)
+ return fls(maxburst) - offset;
+ else
+ return 0;
+}
+
+static void atmci_timeout_timer(struct timer_list *t)
+{
+ struct atmel_mci *host;
+
+ host = from_timer(host, t, timer);
+
+ dev_dbg(&host->pdev->dev, "software timeout\n");
+
+ if (host->mrq->cmd->data) {
+ host->mrq->cmd->data->error = -ETIMEDOUT;
+ host->data = NULL;
+ /*
+ * With some SDIO modules, sometimes DMA transfer hangs. If
+ * stop_transfer() is not called then the DMA request is not
+ * removed, following ones are queued and never computed.
+ */
+ if (host->state == STATE_DATA_XFER)
+ host->stop_transfer(host);
+ } else {
+ host->mrq->cmd->error = -ETIMEDOUT;
+ host->cmd = NULL;
+ }
+ host->need_reset = 1;
+ host->state = STATE_END_REQUEST;
+ smp_wmb();
+ tasklet_schedule(&host->tasklet);
+}
+
+static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host,
+ unsigned int ns)
+{
+ /*
+ * It is easier here to use us instead of ns for the timeout,
+ * it prevents from overflows during calculation.
+ */
+ unsigned int us = DIV_ROUND_UP(ns, 1000);
+
+ /* Maximum clock frequency is host->bus_hz/2 */
+ return us * (DIV_ROUND_UP(host->bus_hz, 2000000));
+}
+
+static void atmci_set_timeout(struct atmel_mci *host,
+ struct atmel_mci_slot *slot, struct mmc_data *data)
+{
+ static unsigned dtomul_to_shift[] = {
+ 0, 4, 7, 8, 10, 12, 16, 20
+ };
+ unsigned timeout;
+ unsigned dtocyc;
+ unsigned dtomul;
+
+ timeout = atmci_ns_to_clocks(host, data->timeout_ns)
+ + data->timeout_clks;
+
+ for (dtomul = 0; dtomul < 8; dtomul++) {
+ unsigned shift = dtomul_to_shift[dtomul];
+ dtocyc = (timeout + (1 << shift) - 1) >> shift;
+ if (dtocyc < 15)
+ break;
+ }
+
+ if (dtomul >= 8) {
+ dtomul = 7;
+ dtocyc = 15;
+ }
+
+ dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n",
+ dtocyc << dtomul_to_shift[dtomul]);
+ atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc)));
+}
+
+/*
+ * Return mask with command flags to be enabled for this command.
+ */
+static u32 atmci_prepare_command(struct mmc_host *mmc,
+ struct mmc_command *cmd)
+{
+ struct mmc_data *data;
+ u32 cmdr;
+
+ cmd->error = -EINPROGRESS;
+
+ cmdr = ATMCI_CMDR_CMDNB(cmd->opcode);
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ cmdr |= ATMCI_CMDR_RSPTYP_136BIT;
+ else
+ cmdr |= ATMCI_CMDR_RSPTYP_48BIT;
+ }
+
+ /*
+ * This should really be MAXLAT_5 for CMD2 and ACMD41, but
+ * it's too difficult to determine whether this is an ACMD or
+ * not. Better make it 64.
+ */
+ cmdr |= ATMCI_CMDR_MAXLAT_64CYC;
+
+ if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
+ cmdr |= ATMCI_CMDR_OPDCMD;
+
+ data = cmd->data;
+ if (data) {
+ cmdr |= ATMCI_CMDR_START_XFER;
+
+ if (cmd->opcode == SD_IO_RW_EXTENDED) {
+ cmdr |= ATMCI_CMDR_SDIO_BLOCK;
+ } else {
+ if (data->blocks > 1)
+ cmdr |= ATMCI_CMDR_MULTI_BLOCK;
+ else
+ cmdr |= ATMCI_CMDR_BLOCK;
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ cmdr |= ATMCI_CMDR_TRDIR_READ;
+ }
+
+ return cmdr;
+}
+
+static void atmci_send_command(struct atmel_mci *host,
+ struct mmc_command *cmd, u32 cmd_flags)
+{
+ unsigned int timeout_ms = cmd->busy_timeout ? cmd->busy_timeout :
+ ATMCI_CMD_TIMEOUT_MS;
+
+ WARN_ON(host->cmd);
+ host->cmd = cmd;
+
+ dev_vdbg(&host->pdev->dev,
+ "start command: ARGR=0x%08x CMDR=0x%08x\n",
+ cmd->arg, cmd_flags);
+
+ atmci_writel(host, ATMCI_ARGR, cmd->arg);
+ atmci_writel(host, ATMCI_CMDR, cmd_flags);
+
+ mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout_ms));
+}
+
+static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data)
+{
+ dev_dbg(&host->pdev->dev, "send stop command\n");
+ atmci_send_command(host, data->stop, host->stop_cmdr);
+ atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
+}
+
+/*
+ * Configure given PDC buffer taking care of alignement issues.
+ * Update host->data_size and host->sg.
+ */
+static void atmci_pdc_set_single_buf(struct atmel_mci *host,
+ enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb)
+{
+ u32 pointer_reg, counter_reg;
+ unsigned int buf_size;
+
+ if (dir == XFER_RECEIVE) {
+ pointer_reg = ATMEL_PDC_RPR;
+ counter_reg = ATMEL_PDC_RCR;
+ } else {
+ pointer_reg = ATMEL_PDC_TPR;
+ counter_reg = ATMEL_PDC_TCR;
+ }
+
+ if (buf_nb == PDC_SECOND_BUF) {
+ pointer_reg += ATMEL_PDC_SCND_BUF_OFF;
+ counter_reg += ATMEL_PDC_SCND_BUF_OFF;
+ }
+
+ if (!host->caps.has_rwproof) {
+ buf_size = host->buf_size;
+ atmci_writel(host, pointer_reg, host->buf_phys_addr);
+ } else {
+ buf_size = sg_dma_len(host->sg);
+ atmci_writel(host, pointer_reg, sg_dma_address(host->sg));
+ }
+
+ if (host->data_size <= buf_size) {
+ if (host->data_size & 0x3) {
+ /* If size is different from modulo 4, transfer bytes */
+ atmci_writel(host, counter_reg, host->data_size);
+ atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE);
+ } else {
+ /* Else transfer 32-bits words */
+ atmci_writel(host, counter_reg, host->data_size / 4);
+ }
+ host->data_size = 0;
+ } else {
+ /* We assume the size of a page is 32-bits aligned */
+ atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4);
+ host->data_size -= sg_dma_len(host->sg);
+ if (host->data_size)
+ host->sg = sg_next(host->sg);
+ }
+}
+
+/*
+ * Configure PDC buffer according to the data size ie configuring one or two
+ * buffers. Don't use this function if you want to configure only the second
+ * buffer. In this case, use atmci_pdc_set_single_buf.
+ */
+static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir)
+{
+ atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF);
+ if (host->data_size)
+ atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF);
+}
+
+/*
+ * Unmap sg lists, called when transfer is finished.
+ */
+static void atmci_pdc_cleanup(struct atmel_mci *host)
+{
+ struct mmc_data *data = host->data;
+
+ if (data)
+ dma_unmap_sg(&host->pdev->dev,
+ data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+}
+
+/*
+ * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after
+ * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY
+ * interrupt needed for both transfer directions.
+ */
+static void atmci_pdc_complete(struct atmel_mci *host)
+{
+ int transfer_size = host->data->blocks * host->data->blksz;
+ int i;
+
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+
+ if ((!host->caps.has_rwproof)
+ && (host->data->flags & MMC_DATA_READ)) {
+ if (host->caps.has_bad_data_ordering)
+ for (i = 0; i < transfer_size; i++)
+ host->buffer[i] = swab32(host->buffer[i]);
+ sg_copy_from_buffer(host->data->sg, host->data->sg_len,
+ host->buffer, transfer_size);
+ }
+
+ atmci_pdc_cleanup(host);
+
+ dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__);
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ tasklet_schedule(&host->tasklet);
+}
+
+static void atmci_dma_cleanup(struct atmel_mci *host)
+{
+ struct mmc_data *data = host->data;
+
+ if (data)
+ dma_unmap_sg(host->dma.chan->device->dev,
+ data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+}
+
+/*
+ * This function is called by the DMA driver from tasklet context.
+ */
+static void atmci_dma_complete(void *arg)
+{
+ struct atmel_mci *host = arg;
+ struct mmc_data *data = host->data;
+
+ dev_vdbg(&host->pdev->dev, "DMA complete\n");
+
+ if (host->caps.has_dma_conf_reg)
+ /* Disable DMA hardware handshaking on MCI */
+ atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN);
+
+ atmci_dma_cleanup(host);
+
+ /*
+ * If the card was removed, data will be NULL. No point trying
+ * to send the stop command or waiting for NBUSY in this case.
+ */
+ if (data) {
+ dev_dbg(&host->pdev->dev,
+ "(%s) set pending xfer complete\n", __func__);
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ tasklet_schedule(&host->tasklet);
+
+ /*
+ * Regardless of what the documentation says, we have
+ * to wait for NOTBUSY even after block read
+ * operations.
+ *
+ * When the DMA transfer is complete, the controller
+ * may still be reading the CRC from the card, i.e.
+ * the data transfer is still in progress and we
+ * haven't seen all the potential error bits yet.
+ *
+ * The interrupt handler will schedule a different
+ * tasklet to finish things up when the data transfer
+ * is completely done.
+ *
+ * We may not complete the mmc request here anyway
+ * because the mmc layer may call back and cause us to
+ * violate the "don't submit new operations from the
+ * completion callback" rule of the dma engine
+ * framework.
+ */
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ }
+}
+
+/*
+ * Returns a mask of interrupt flags to be enabled after the whole
+ * request has been prepared.
+ */
+static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data)
+{
+ u32 iflags;
+
+ data->error = -EINPROGRESS;
+
+ host->sg = data->sg;
+ host->sg_len = data->sg_len;
+ host->data = data;
+ host->data_chan = NULL;
+
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+
+ /*
+ * Errata: MMC data write operation with less than 12
+ * bytes is impossible.
+ *
+ * Errata: MCI Transmit Data Register (TDR) FIFO
+ * corruption when length is not multiple of 4.
+ */
+ if (data->blocks * data->blksz < 12
+ || (data->blocks * data->blksz) & 3)
+ host->need_reset = true;
+
+ host->pio_offset = 0;
+ if (data->flags & MMC_DATA_READ)
+ iflags |= ATMCI_RXRDY;
+ else
+ iflags |= ATMCI_TXRDY;
+
+ return iflags;
+}
+
+/*
+ * Set interrupt flags and set block length into the MCI mode register even
+ * if this value is also accessible in the MCI block register. It seems to be
+ * necessary before the High Speed MCI version. It also map sg and configure
+ * PDC registers.
+ */
+static u32
+atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+ u32 iflags, tmp;
+ int i;
+
+ data->error = -EINPROGRESS;
+
+ host->data = data;
+ host->sg = data->sg;
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+
+ /* Enable pdc mode */
+ atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE);
+
+ if (data->flags & MMC_DATA_READ)
+ iflags |= ATMCI_ENDRX | ATMCI_RXBUFF;
+ else
+ iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE;
+
+ /* Set BLKLEN */
+ tmp = atmci_readl(host, ATMCI_MR);
+ tmp &= 0x0000ffff;
+ tmp |= ATMCI_BLKLEN(data->blksz);
+ atmci_writel(host, ATMCI_MR, tmp);
+
+ /* Configure PDC */
+ host->data_size = data->blocks * data->blksz;
+ dma_map_sg(&host->pdev->dev, data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+
+ if ((!host->caps.has_rwproof)
+ && (host->data->flags & MMC_DATA_WRITE)) {
+ sg_copy_to_buffer(host->data->sg, host->data->sg_len,
+ host->buffer, host->data_size);
+ if (host->caps.has_bad_data_ordering)
+ for (i = 0; i < host->data_size; i++)
+ host->buffer[i] = swab32(host->buffer[i]);
+ }
+
+ if (host->data_size)
+ atmci_pdc_set_both_buf(host, data->flags & MMC_DATA_READ ?
+ XFER_RECEIVE : XFER_TRANSMIT);
+ return iflags;
+}
+
+static u32
+atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+ struct dma_chan *chan;
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sg;
+ unsigned int i;
+ enum dma_transfer_direction slave_dirn;
+ unsigned int sglen;
+ u32 maxburst;
+ u32 iflags;
+
+ data->error = -EINPROGRESS;
+
+ WARN_ON(host->data);
+ host->sg = NULL;
+ host->data = data;
+
+ iflags = ATMCI_DATA_ERROR_FLAGS;
+
+ /*
+ * We don't do DMA on "complex" transfers, i.e. with
+ * non-word-aligned buffers or lengths. Also, we don't bother
+ * with all the DMA setup overhead for short transfers.
+ */
+ if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD)
+ return atmci_prepare_data(host, data);
+ if (data->blksz & 3)
+ return atmci_prepare_data(host, data);
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->offset & 3 || sg->length & 3)
+ return atmci_prepare_data(host, data);
+ }
+
+ /* If we don't have a channel, we can't do DMA */
+ if (!host->dma.chan)
+ return -ENODEV;
+
+ chan = host->dma.chan;
+ host->data_chan = chan;
+
+ if (data->flags & MMC_DATA_READ) {
+ host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+ maxburst = atmci_convert_chksize(host,
+ host->dma_conf.src_maxburst);
+ } else {
+ host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+ maxburst = atmci_convert_chksize(host,
+ host->dma_conf.dst_maxburst);
+ }
+
+ if (host->caps.has_dma_conf_reg)
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) |
+ ATMCI_DMAEN);
+
+ sglen = dma_map_sg(chan->device->dev, data->sg,
+ data->sg_len, mmc_get_dma_dir(data));
+
+ dmaengine_slave_config(chan, &host->dma_conf);
+ desc = dmaengine_prep_slave_sg(chan,
+ data->sg, sglen, slave_dirn,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ goto unmap_exit;
+
+ host->dma.data_desc = desc;
+ desc->callback = atmci_dma_complete;
+ desc->callback_param = host;
+
+ return iflags;
+unmap_exit:
+ dma_unmap_sg(chan->device->dev, data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+ return -ENOMEM;
+}
+
+static void
+atmci_submit_data(struct atmel_mci *host, struct mmc_data *data)
+{
+ return;
+}
+
+/*
+ * Start PDC according to transfer direction.
+ */
+static void
+atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data)
+{
+ if (data->flags & MMC_DATA_READ)
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN);
+ else
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN);
+}
+
+static void
+atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data)
+{
+ struct dma_chan *chan = host->data_chan;
+ struct dma_async_tx_descriptor *desc = host->dma.data_desc;
+
+ if (chan) {
+ dmaengine_submit(desc);
+ dma_async_issue_pending(chan);
+ }
+}
+
+static void atmci_stop_transfer(struct atmel_mci *host)
+{
+ dev_dbg(&host->pdev->dev,
+ "(%s) set pending xfer complete\n", __func__);
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+}
+
+/*
+ * Stop data transfer because error(s) occurred.
+ */
+static void atmci_stop_transfer_pdc(struct atmel_mci *host)
+{
+ atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS);
+}
+
+static void atmci_stop_transfer_dma(struct atmel_mci *host)
+{
+ struct dma_chan *chan = host->data_chan;
+
+ if (chan) {
+ dmaengine_terminate_all(chan);
+ atmci_dma_cleanup(host);
+ } else {
+ /* Data transfer was stopped by the interrupt handler */
+ dev_dbg(&host->pdev->dev,
+ "(%s) set pending xfer complete\n", __func__);
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ }
+}
+
+/*
+ * Start a request: prepare data if needed, prepare the command and activate
+ * interrupts.
+ */
+static void atmci_start_request(struct atmel_mci *host,
+ struct atmel_mci_slot *slot)
+{
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ u32 iflags;
+ u32 cmdflags;
+
+ mrq = slot->mrq;
+ host->cur_slot = slot;
+ host->mrq = mrq;
+
+ host->pending_events = 0;
+ host->completed_events = 0;
+ host->cmd_status = 0;
+ host->data_status = 0;
+
+ dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode);
+
+ if (host->need_reset || host->caps.need_reset_after_xfer) {
+ iflags = atmci_readl(host, ATMCI_IMR);
+ iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ atmci_writel(host, ATMCI_IER, iflags);
+ host->need_reset = false;
+ }
+ atmci_writel(host, ATMCI_SDCR, slot->sdc_reg);
+
+ iflags = atmci_readl(host, ATMCI_IMR);
+ if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
+ dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n",
+ iflags);
+
+ if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) {
+ /* Send init sequence (74 clock cycles) */
+ atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT);
+ while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY))
+ cpu_relax();
+ }
+ iflags = 0;
+ data = mrq->data;
+ if (data) {
+ atmci_set_timeout(host, slot, data);
+
+ /* Must set block count/size before sending command */
+ atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks)
+ | ATMCI_BLKLEN(data->blksz));
+ dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n",
+ ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz));
+
+ iflags |= host->prepare_data(host, data);
+ }
+
+ iflags |= ATMCI_CMDRDY;
+ cmd = mrq->cmd;
+ cmdflags = atmci_prepare_command(slot->mmc, cmd);
+
+ /*
+ * DMA transfer should be started before sending the command to avoid
+ * unexpected errors especially for read operations in SDIO mode.
+ * Unfortunately, in PDC mode, command has to be sent before starting
+ * the transfer.
+ */
+ if (host->submit_data != &atmci_submit_data_dma)
+ atmci_send_command(host, cmd, cmdflags);
+
+ if (data)
+ host->submit_data(host, data);
+
+ if (host->submit_data == &atmci_submit_data_dma)
+ atmci_send_command(host, cmd, cmdflags);
+
+ if (mrq->stop) {
+ host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
+ host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;
+ if (!(data->flags & MMC_DATA_WRITE))
+ host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ;
+ host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK;
+ }
+
+ /*
+ * We could have enabled interrupts earlier, but I suspect
+ * that would open up a nice can of interesting race
+ * conditions (e.g. command and data complete, but stop not
+ * prepared yet.)
+ */
+ atmci_writel(host, ATMCI_IER, iflags);
+}
+
+static void atmci_queue_request(struct atmel_mci *host,
+ struct atmel_mci_slot *slot, struct mmc_request *mrq)
+{
+ dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n",
+ host->state);
+
+ spin_lock_bh(&host->lock);
+ slot->mrq = mrq;
+ if (host->state == STATE_IDLE) {
+ host->state = STATE_SENDING_CMD;
+ atmci_start_request(host, slot);
+ } else {
+ dev_dbg(&host->pdev->dev, "queue request\n");
+ list_add_tail(&slot->queue_node, &host->queue);
+ }
+ spin_unlock_bh(&host->lock);
+}
+
+static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+ struct atmel_mci *host = slot->host;
+ struct mmc_data *data;
+
+ WARN_ON(slot->mrq);
+ dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+
+ /*
+ * We may "know" the card is gone even though there's still an
+ * electrical connection. If so, we really need to communicate
+ * this to the MMC core since there won't be any more
+ * interrupts as the card is completely removed. Otherwise,
+ * the MMC core might believe the card is still there even
+ * though the card was just removed very slowly.
+ */
+ if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) {
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ /* We don't support multiple blocks of weird lengths. */
+ data = mrq->data;
+ if (data && data->blocks > 1 && data->blksz & 3) {
+ mrq->cmd->error = -EINVAL;
+ mmc_request_done(mmc, mrq);
+ }
+
+ atmci_queue_request(host, slot, mrq);
+}
+
+static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+ struct atmel_mci *host = slot->host;
+ unsigned int i;
+
+ slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ slot->sdc_reg |= ATMCI_SDCBUS_1BIT;
+ break;
+ case MMC_BUS_WIDTH_4:
+ slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
+ break;
+ case MMC_BUS_WIDTH_8:
+ slot->sdc_reg |= ATMCI_SDCBUS_8BIT;
+ break;
+ }
+
+ if (ios->clock) {
+ unsigned int clock_min = ~0U;
+ int clkdiv;
+
+ spin_lock_bh(&host->lock);
+ if (!host->mode_reg) {
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ }
+
+ /*
+ * Use mirror of ios->clock to prevent race with mmc
+ * core ios update when finding the minimum.
+ */
+ slot->clock = ios->clock;
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+ if (host->slot[i] && host->slot[i]->clock
+ && host->slot[i]->clock < clock_min)
+ clock_min = host->slot[i]->clock;
+ }
+
+ /* Calculate clock divider */
+ if (host->caps.has_odd_clk_div) {
+ clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
+ if (clkdiv < 0) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too fast; using %lu\n",
+ clock_min, host->bus_hz / 2);
+ clkdiv = 0;
+ } else if (clkdiv > 511) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too slow; using %lu\n",
+ clock_min, host->bus_hz / (511 + 2));
+ clkdiv = 511;
+ }
+ host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
+ | ATMCI_MR_CLKODD(clkdiv & 1);
+ } else {
+ clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
+ if (clkdiv > 255) {
+ dev_warn(&mmc->class_dev,
+ "clock %u too slow; using %lu\n",
+ clock_min, host->bus_hz / (2 * 256));
+ clkdiv = 255;
+ }
+ host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
+ }
+
+ /*
+ * WRPROOF and RDPROOF prevent overruns/underruns by
+ * stopping the clock when the FIFO is full/empty.
+ * This state is not expected to last for long.
+ */
+ if (host->caps.has_rwproof)
+ host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF);
+
+ if (host->caps.has_cfg_reg) {
+ /* setup High Speed mode in relation with card capacity */
+ if (ios->timing == MMC_TIMING_SD_HS)
+ host->cfg_reg |= ATMCI_CFG_HSMODE;
+ else
+ host->cfg_reg &= ~ATMCI_CFG_HSMODE;
+ }
+
+ if (list_empty(&host->queue)) {
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ } else {
+ host->need_clock_update = true;
+ }
+
+ spin_unlock_bh(&host->lock);
+ } else {
+ bool any_slot_active = false;
+
+ spin_lock_bh(&host->lock);
+ slot->clock = 0;
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+ if (host->slot[i] && host->slot[i]->clock) {
+ any_slot_active = true;
+ break;
+ }
+ }
+ if (!any_slot_active) {
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+ if (host->mode_reg) {
+ atmci_readl(host, ATMCI_MR);
+ }
+ host->mode_reg = 0;
+ }
+ spin_unlock_bh(&host->lock);
+ }
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ break;
+ case MMC_POWER_UP:
+ set_bit(ATMCI_CARD_NEED_INIT, &slot->flags);
+ if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+ break;
+ default:
+ break;
+ }
+}
+
+static int atmci_get_ro(struct mmc_host *mmc)
+{
+ int read_only = -ENOSYS;
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+
+ if (gpio_is_valid(slot->wp_pin)) {
+ read_only = gpio_get_value(slot->wp_pin);
+ dev_dbg(&mmc->class_dev, "card is %s\n",
+ read_only ? "read-only" : "read-write");
+ }
+
+ return read_only;
+}
+
+static int atmci_get_cd(struct mmc_host *mmc)
+{
+ int present = -ENOSYS;
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+
+ if (gpio_is_valid(slot->detect_pin)) {
+ present = !(gpio_get_value(slot->detect_pin) ^
+ slot->detect_is_active_high);
+ dev_dbg(&mmc->class_dev, "card is %spresent\n",
+ present ? "" : "not ");
+ }
+
+ return present;
+}
+
+static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct atmel_mci_slot *slot = mmc_priv(mmc);
+ struct atmel_mci *host = slot->host;
+
+ if (enable)
+ atmci_writel(host, ATMCI_IER, slot->sdio_irq);
+ else
+ atmci_writel(host, ATMCI_IDR, slot->sdio_irq);
+}
+
+static const struct mmc_host_ops atmci_ops = {
+ .request = atmci_request,
+ .set_ios = atmci_set_ios,
+ .get_ro = atmci_get_ro,
+ .get_cd = atmci_get_cd,
+ .enable_sdio_irq = atmci_enable_sdio_irq,
+};
+
+/* Called with host->lock held */
+static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
+ __releases(&host->lock)
+ __acquires(&host->lock)
+{
+ struct atmel_mci_slot *slot = NULL;
+ struct mmc_host *prev_mmc = host->cur_slot->mmc;
+
+ WARN_ON(host->cmd || host->data);
+
+ del_timer(&host->timer);
+
+ /*
+ * Update the MMC clock rate if necessary. This may be
+ * necessary if set_ios() is called when a different slot is
+ * busy transferring data.
+ */
+ if (host->need_clock_update) {
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+ }
+
+ host->cur_slot->mrq = NULL;
+ host->mrq = NULL;
+ if (!list_empty(&host->queue)) {
+ slot = list_entry(host->queue.next,
+ struct atmel_mci_slot, queue_node);
+ list_del(&slot->queue_node);
+ dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n",
+ mmc_hostname(slot->mmc));
+ host->state = STATE_SENDING_CMD;
+ atmci_start_request(host, slot);
+ } else {
+ dev_vdbg(&host->pdev->dev, "list empty\n");
+ host->state = STATE_IDLE;
+ }
+
+ spin_unlock(&host->lock);
+ mmc_request_done(prev_mmc, mrq);
+ spin_lock(&host->lock);
+}
+
+static void atmci_command_complete(struct atmel_mci *host,
+ struct mmc_command *cmd)
+{
+ u32 status = host->cmd_status;
+
+ /* Read the response from the card (up to 16 bytes) */
+ cmd->resp[0] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[1] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[2] = atmci_readl(host, ATMCI_RSPR);
+ cmd->resp[3] = atmci_readl(host, ATMCI_RSPR);
+
+ if (status & ATMCI_RTOE)
+ cmd->error = -ETIMEDOUT;
+ else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE))
+ cmd->error = -EILSEQ;
+ else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE))
+ cmd->error = -EIO;
+ else if (host->mrq->data && (host->mrq->data->blksz & 3)) {
+ if (host->caps.need_blksz_mul_4) {
+ cmd->error = -EINVAL;
+ host->need_reset = 1;
+ }
+ } else
+ cmd->error = 0;
+}
+
+static void atmci_detect_change(struct timer_list *t)
+{
+ struct atmel_mci_slot *slot = from_timer(slot, t, detect_timer);
+ bool present;
+ bool present_old;
+
+ /*
+ * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before
+ * freeing the interrupt. We must not re-enable the interrupt
+ * if it has been freed, and if we're shutting down, it
+ * doesn't really matter whether the card is present or not.
+ */
+ smp_rmb();
+ if (test_bit(ATMCI_SHUTDOWN, &slot->flags))
+ return;
+
+ enable_irq(gpio_to_irq(slot->detect_pin));
+ present = !(gpio_get_value(slot->detect_pin) ^
+ slot->detect_is_active_high);
+ present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags);
+
+ dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n",
+ present, present_old);
+
+ if (present != present_old) {
+ struct atmel_mci *host = slot->host;
+ struct mmc_request *mrq;
+
+ dev_dbg(&slot->mmc->class_dev, "card %s\n",
+ present ? "inserted" : "removed");
+
+ spin_lock(&host->lock);
+
+ if (!present)
+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
+ else
+ set_bit(ATMCI_CARD_PRESENT, &slot->flags);
+
+ /* Clean up queue if present */
+ mrq = slot->mrq;
+ if (mrq) {
+ if (mrq == host->mrq) {
+ /*
+ * Reset controller to terminate any ongoing
+ * commands or data transfers.
+ */
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+ atmci_writel(host, ATMCI_MR, host->mode_reg);
+ if (host->caps.has_cfg_reg)
+ atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+
+ host->data = NULL;
+ host->cmd = NULL;
+
+ switch (host->state) {
+ case STATE_IDLE:
+ break;
+ case STATE_SENDING_CMD:
+ mrq->cmd->error = -ENOMEDIUM;
+ if (mrq->data)
+ host->stop_transfer(host);
+ break;
+ case STATE_DATA_XFER:
+ mrq->data->error = -ENOMEDIUM;
+ host->stop_transfer(host);
+ break;
+ case STATE_WAITING_NOTBUSY:
+ mrq->data->error = -ENOMEDIUM;
+ break;
+ case STATE_SENDING_STOP:
+ mrq->stop->error = -ENOMEDIUM;
+ break;
+ case STATE_END_REQUEST:
+ break;
+ }
+
+ atmci_request_end(host, mrq);
+ } else {
+ list_del(&slot->queue_node);
+ mrq->cmd->error = -ENOMEDIUM;
+ if (mrq->data)
+ mrq->data->error = -ENOMEDIUM;
+ if (mrq->stop)
+ mrq->stop->error = -ENOMEDIUM;
+
+ spin_unlock(&host->lock);
+ mmc_request_done(slot->mmc, mrq);
+ spin_lock(&host->lock);
+ }
+ }
+ spin_unlock(&host->lock);
+
+ mmc_detect_change(slot->mmc, 0);
+ }
+}
+
+static void atmci_tasklet_func(struct tasklet_struct *t)
+{
+ struct atmel_mci *host = from_tasklet(host, t, tasklet);
+ struct mmc_request *mrq = host->mrq;
+ struct mmc_data *data = host->data;
+ enum atmel_mci_state state = host->state;
+ enum atmel_mci_state prev_state;
+ u32 status;
+
+ spin_lock(&host->lock);
+
+ state = host->state;
+
+ dev_vdbg(&host->pdev->dev,
+ "tasklet: state %u pending/completed/mask %lx/%lx/%x\n",
+ state, host->pending_events, host->completed_events,
+ atmci_readl(host, ATMCI_IMR));
+
+ do {
+ prev_state = state;
+ dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state);
+
+ switch (state) {
+ case STATE_IDLE:
+ break;
+
+ case STATE_SENDING_CMD:
+ /*
+ * Command has been sent, we are waiting for command
+ * ready. Then we have three next states possible:
+ * END_REQUEST by default, WAITING_NOTBUSY if it's a
+ * command needing it or DATA_XFER if there is data.
+ */
+ dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+ if (!atmci_test_and_clear_pending(host,
+ EVENT_CMD_RDY))
+ break;
+
+ dev_dbg(&host->pdev->dev, "set completed cmd ready\n");
+ host->cmd = NULL;
+ atmci_set_completed(host, EVENT_CMD_RDY);
+ atmci_command_complete(host, mrq->cmd);
+ if (mrq->data) {
+ dev_dbg(&host->pdev->dev,
+ "command with data transfer");
+ /*
+ * If there is a command error don't start
+ * data transfer.
+ */
+ if (mrq->cmd->error) {
+ host->stop_transfer(host);
+ host->data = NULL;
+ atmci_writel(host, ATMCI_IDR,
+ ATMCI_TXRDY | ATMCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS);
+ state = STATE_END_REQUEST;
+ } else
+ state = STATE_DATA_XFER;
+ } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) {
+ dev_dbg(&host->pdev->dev,
+ "command response need waiting notbusy");
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ state = STATE_WAITING_NOTBUSY;
+ } else
+ state = STATE_END_REQUEST;
+
+ break;
+
+ case STATE_DATA_XFER:
+ if (atmci_test_and_clear_pending(host,
+ EVENT_DATA_ERROR)) {
+ dev_dbg(&host->pdev->dev, "set completed data error\n");
+ atmci_set_completed(host, EVENT_DATA_ERROR);
+ state = STATE_END_REQUEST;
+ break;
+ }
+
+ /*
+ * A data transfer is in progress. The event expected
+ * to move to the next state depends of data transfer
+ * type (PDC or DMA). Once transfer done we can move
+ * to the next step which is WAITING_NOTBUSY in write
+ * case and directly SENDING_STOP in read case.
+ */
+ dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n");
+ if (!atmci_test_and_clear_pending(host,
+ EVENT_XFER_COMPLETE))
+ break;
+
+ dev_dbg(&host->pdev->dev,
+ "(%s) set completed xfer complete\n",
+ __func__);
+ atmci_set_completed(host, EVENT_XFER_COMPLETE);
+
+ if (host->caps.need_notbusy_for_read_ops ||
+ (host->data->flags & MMC_DATA_WRITE)) {
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ state = STATE_WAITING_NOTBUSY;
+ } else if (host->mrq->stop) {
+ atmci_send_stop_cmd(host, data);
+ state = STATE_SENDING_STOP;
+ } else {
+ host->data = NULL;
+ data->bytes_xfered = data->blocks * data->blksz;
+ data->error = 0;
+ state = STATE_END_REQUEST;
+ }
+ break;
+
+ case STATE_WAITING_NOTBUSY:
+ /*
+ * We can be in the state for two reasons: a command
+ * requiring waiting not busy signal (stop command
+ * included) or a write operation. In the latest case,
+ * we need to send a stop command.
+ */
+ dev_dbg(&host->pdev->dev, "FSM: not busy?\n");
+ if (!atmci_test_and_clear_pending(host,
+ EVENT_NOTBUSY))
+ break;
+
+ dev_dbg(&host->pdev->dev, "set completed not busy\n");
+ atmci_set_completed(host, EVENT_NOTBUSY);
+
+ if (host->data) {
+ /*
+ * For some commands such as CMD53, even if
+ * there is data transfer, there is no stop
+ * command to send.
+ */
+ if (host->mrq->stop) {
+ atmci_send_stop_cmd(host, data);
+ state = STATE_SENDING_STOP;
+ } else {
+ host->data = NULL;
+ data->bytes_xfered = data->blocks
+ * data->blksz;
+ data->error = 0;
+ state = STATE_END_REQUEST;
+ }
+ } else
+ state = STATE_END_REQUEST;
+ break;
+
+ case STATE_SENDING_STOP:
+ /*
+ * In this state, it is important to set host->data to
+ * NULL (which is tested in the waiting notbusy state)
+ * in order to go to the end request state instead of
+ * sending stop again.
+ */
+ dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n");
+ if (!atmci_test_and_clear_pending(host,
+ EVENT_CMD_RDY))
+ break;
+
+ dev_dbg(&host->pdev->dev, "FSM: cmd ready\n");
+ host->cmd = NULL;
+ data->bytes_xfered = data->blocks * data->blksz;
+ data->error = 0;
+ atmci_command_complete(host, mrq->stop);
+ if (mrq->stop->error) {
+ host->stop_transfer(host);
+ atmci_writel(host, ATMCI_IDR,
+ ATMCI_TXRDY | ATMCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS);
+ state = STATE_END_REQUEST;
+ } else {
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ state = STATE_WAITING_NOTBUSY;
+ }
+ host->data = NULL;
+ break;
+
+ case STATE_END_REQUEST:
+ atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS);
+ status = host->data_status;
+ if (unlikely(status)) {
+ host->stop_transfer(host);
+ host->data = NULL;
+ if (data) {
+ if (status & ATMCI_DTOE) {
+ data->error = -ETIMEDOUT;
+ } else if (status & ATMCI_DCRCE) {
+ data->error = -EILSEQ;
+ } else {
+ data->error = -EIO;
+ }
+ }
+ }
+
+ atmci_request_end(host, host->mrq);
+ goto unlock; /* atmci_request_end() sets host->state */
+ break;
+ }
+ } while (state != prev_state);
+
+ host->state = state;
+
+unlock:
+ spin_unlock(&host->lock);
+}
+
+static void atmci_read_data_pio(struct atmel_mci *host)
+{
+ struct scatterlist *sg = host->sg;
+ unsigned int offset = host->pio_offset;
+ struct mmc_data *data = host->data;
+ u32 value;
+ u32 status;
+ unsigned int nbytes = 0;
+
+ do {
+ value = atmci_readl(host, ATMCI_RDR);
+ if (likely(offset + 4 <= sg->length)) {
+ sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset);
+
+ offset += 4;
+ nbytes += 4;
+
+ if (offset == sg->length) {
+ flush_dcache_page(sg_page(sg));
+ host->sg = sg = sg_next(sg);
+ host->sg_len--;
+ if (!sg || !host->sg_len)
+ goto done;
+
+ offset = 0;
+ }
+ } else {
+ unsigned int remaining = sg->length - offset;
+
+ sg_pcopy_from_buffer(sg, 1, &value, remaining, offset);
+ nbytes += remaining;
+
+ flush_dcache_page(sg_page(sg));
+ host->sg = sg = sg_next(sg);
+ host->sg_len--;
+ if (!sg || !host->sg_len)
+ goto done;
+
+ offset = 4 - remaining;
+ sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining,
+ offset, 0);
+ nbytes += offset;
+ }
+
+ status = atmci_readl(host, ATMCI_SR);
+ if (status & ATMCI_DATA_ERROR_FLAGS) {
+ atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY
+ | ATMCI_DATA_ERROR_FLAGS));
+ host->data_status = status;
+ data->bytes_xfered += nbytes;
+ return;
+ }
+ } while (status & ATMCI_RXRDY);
+
+ host->pio_offset = offset;
+ data->bytes_xfered += nbytes;
+
+ return;
+
+done:
+ atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ data->bytes_xfered += nbytes;
+ smp_wmb();
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+}
+
+static void atmci_write_data_pio(struct atmel_mci *host)
+{
+ struct scatterlist *sg = host->sg;
+ unsigned int offset = host->pio_offset;
+ struct mmc_data *data = host->data;
+ u32 value;
+ u32 status;
+ unsigned int nbytes = 0;
+
+ do {
+ if (likely(offset + 4 <= sg->length)) {
+ sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset);
+ atmci_writel(host, ATMCI_TDR, value);
+
+ offset += 4;
+ nbytes += 4;
+ if (offset == sg->length) {
+ host->sg = sg = sg_next(sg);
+ host->sg_len--;
+ if (!sg || !host->sg_len)
+ goto done;
+
+ offset = 0;
+ }
+ } else {
+ unsigned int remaining = sg->length - offset;
+
+ value = 0;
+ sg_pcopy_to_buffer(sg, 1, &value, remaining, offset);
+ nbytes += remaining;
+
+ host->sg = sg = sg_next(sg);
+ host->sg_len--;
+ if (!sg || !host->sg_len) {
+ atmci_writel(host, ATMCI_TDR, value);
+ goto done;
+ }
+
+ offset = 4 - remaining;
+ sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining,
+ offset, 0);
+ atmci_writel(host, ATMCI_TDR, value);
+ nbytes += offset;
+ }
+
+ status = atmci_readl(host, ATMCI_SR);
+ if (status & ATMCI_DATA_ERROR_FLAGS) {
+ atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY
+ | ATMCI_DATA_ERROR_FLAGS));
+ host->data_status = status;
+ data->bytes_xfered += nbytes;
+ return;
+ }
+ } while (status & ATMCI_TXRDY);
+
+ host->pio_offset = offset;
+ data->bytes_xfered += nbytes;
+
+ return;
+
+done:
+ atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY);
+ atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
+ data->bytes_xfered += nbytes;
+ smp_wmb();
+ atmci_set_pending(host, EVENT_XFER_COMPLETE);
+}
+
+static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status)
+{
+ int i;
+
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+ struct atmel_mci_slot *slot = host->slot[i];
+ if (slot && (status & slot->sdio_irq)) {
+ mmc_signal_sdio_irq(slot->mmc);
+ }
+ }
+}
+
+
+static irqreturn_t atmci_interrupt(int irq, void *dev_id)
+{
+ struct atmel_mci *host = dev_id;
+ u32 status, mask, pending;
+ unsigned int pass_count = 0;
+
+ do {
+ status = atmci_readl(host, ATMCI_SR);
+ mask = atmci_readl(host, ATMCI_IMR);
+ pending = status & mask;
+ if (!pending)
+ break;
+
+ if (pending & ATMCI_DATA_ERROR_FLAGS) {
+ dev_dbg(&host->pdev->dev, "IRQ: data error\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS
+ | ATMCI_RXRDY | ATMCI_TXRDY
+ | ATMCI_ENDRX | ATMCI_ENDTX
+ | ATMCI_RXBUFF | ATMCI_TXBUFE);
+
+ host->data_status = status;
+ dev_dbg(&host->pdev->dev, "set pending data error\n");
+ smp_wmb();
+ atmci_set_pending(host, EVENT_DATA_ERROR);
+ tasklet_schedule(&host->tasklet);
+ }
+
+ if (pending & ATMCI_TXBUFE) {
+ dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE);
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+ /*
+ * We can receive this interruption before having configured
+ * the second pdc buffer, so we need to reconfigure first and
+ * second buffers again
+ */
+ if (host->data_size) {
+ atmci_pdc_set_both_buf(host, XFER_TRANSMIT);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+ atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE);
+ } else {
+ atmci_pdc_complete(host);
+ }
+ } else if (pending & ATMCI_ENDTX) {
+ dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX);
+
+ if (host->data_size) {
+ atmci_pdc_set_single_buf(host,
+ XFER_TRANSMIT, PDC_SECOND_BUF);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDTX);
+ }
+ }
+
+ if (pending & ATMCI_RXBUFF) {
+ dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF);
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+ /*
+ * We can receive this interruption before having configured
+ * the second pdc buffer, so we need to reconfigure first and
+ * second buffers again
+ */
+ if (host->data_size) {
+ atmci_pdc_set_both_buf(host, XFER_RECEIVE);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+ atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF);
+ } else {
+ atmci_pdc_complete(host);
+ }
+ } else if (pending & ATMCI_ENDRX) {
+ dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX);
+
+ if (host->data_size) {
+ atmci_pdc_set_single_buf(host,
+ XFER_RECEIVE, PDC_SECOND_BUF);
+ atmci_writel(host, ATMCI_IER, ATMCI_ENDRX);
+ }
+ }
+
+ /*
+ * First mci IPs, so mainly the ones having pdc, have some
+ * issues with the notbusy signal. You can't get it after
+ * data transmission if you have not sent a stop command.
+ * The appropriate workaround is to use the BLKE signal.
+ */
+ if (pending & ATMCI_BLKE) {
+ dev_dbg(&host->pdev->dev, "IRQ: blke\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_BLKE);
+ smp_wmb();
+ dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+ atmci_set_pending(host, EVENT_NOTBUSY);
+ tasklet_schedule(&host->tasklet);
+ }
+
+ if (pending & ATMCI_NOTBUSY) {
+ dev_dbg(&host->pdev->dev, "IRQ: not_busy\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY);
+ smp_wmb();
+ dev_dbg(&host->pdev->dev, "set pending notbusy\n");
+ atmci_set_pending(host, EVENT_NOTBUSY);
+ tasklet_schedule(&host->tasklet);
+ }
+
+ if (pending & ATMCI_RXRDY)
+ atmci_read_data_pio(host);
+ if (pending & ATMCI_TXRDY)
+ atmci_write_data_pio(host);
+
+ if (pending & ATMCI_CMDRDY) {
+ dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n");
+ atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY);
+ host->cmd_status = status;
+ smp_wmb();
+ dev_dbg(&host->pdev->dev, "set pending cmd rdy\n");
+ atmci_set_pending(host, EVENT_CMD_RDY);
+ tasklet_schedule(&host->tasklet);
+ }
+
+ if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB))
+ atmci_sdio_interrupt(host, status);
+
+ } while (pass_count++ < 5);
+
+ return pass_count ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
+{
+ struct atmel_mci_slot *slot = dev_id;
+
+ /*
+ * Disable interrupts until the pin has stabilized and check
+ * the state then. Use mod_timer() since we may be in the
+ * middle of the timer routine when this interrupt triggers.
+ */
+ disable_irq_nosync(irq);
+ mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20));
+
+ return IRQ_HANDLED;
+}
+
+static int atmci_init_slot(struct atmel_mci *host,
+ struct mci_slot_pdata *slot_data, unsigned int id,
+ u32 sdc_reg, u32 sdio_irq)
+{
+ struct mmc_host *mmc;
+ struct atmel_mci_slot *slot;
+ int ret;
+
+ mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ slot = mmc_priv(mmc);
+ slot->mmc = mmc;
+ slot->host = host;
+ slot->detect_pin = slot_data->detect_pin;
+ slot->wp_pin = slot_data->wp_pin;
+ slot->detect_is_active_high = slot_data->detect_is_active_high;
+ slot->sdc_reg = sdc_reg;
+ slot->sdio_irq = sdio_irq;
+
+ dev_dbg(&mmc->class_dev,
+ "slot[%u]: bus_width=%u, detect_pin=%d, "
+ "detect_is_active_high=%s, wp_pin=%d\n",
+ id, slot_data->bus_width, slot_data->detect_pin,
+ slot_data->detect_is_active_high ? "true" : "false",
+ slot_data->wp_pin);
+
+ mmc->ops = &atmci_ops;
+ mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512);
+ mmc->f_max = host->bus_hz / 2;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (sdio_irq)
+ mmc->caps |= MMC_CAP_SDIO_IRQ;
+ if (host->caps.has_highspeed)
+ mmc->caps |= MMC_CAP_SD_HIGHSPEED;
+ /*
+ * Without the read/write proof capability, it is strongly suggested to
+ * use only one bit for data to prevent fifo underruns and overruns
+ * which will corrupt data.
+ */
+ if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) {
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ if (slot_data->bus_width >= 8)
+ mmc->caps |= MMC_CAP_8_BIT_DATA;
+ }
+
+ if (atmci_get_version(host) < 0x200) {
+ mmc->max_segs = 256;
+ mmc->max_blk_size = 4095;
+ mmc->max_blk_count = 256;
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs;
+ } else {
+ mmc->max_segs = 64;
+ mmc->max_req_size = 32768 * 512;
+ mmc->max_blk_size = 32768;
+ mmc->max_blk_count = 512;
+ }
+
+ /* Assume card is present initially */
+ set_bit(ATMCI_CARD_PRESENT, &slot->flags);
+ if (gpio_is_valid(slot->detect_pin)) {
+ if (devm_gpio_request(&host->pdev->dev, slot->detect_pin,
+ "mmc_detect")) {
+ dev_dbg(&mmc->class_dev, "no detect pin available\n");
+ slot->detect_pin = -EBUSY;
+ } else if (gpio_get_value(slot->detect_pin) ^
+ slot->detect_is_active_high) {
+ clear_bit(ATMCI_CARD_PRESENT, &slot->flags);
+ }
+ }
+
+ if (!gpio_is_valid(slot->detect_pin)) {
+ if (slot_data->non_removable)
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
+ else
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+ }
+
+ if (gpio_is_valid(slot->wp_pin)) {
+ if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
+ "mmc_wp")) {
+ dev_dbg(&mmc->class_dev, "no WP pin available\n");
+ slot->wp_pin = -EBUSY;
+ }
+ }
+
+ host->slot[id] = slot;
+ mmc_regulator_get_supply(mmc);
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ mmc_free_host(mmc);
+ return ret;
+ }
+
+ if (gpio_is_valid(slot->detect_pin)) {
+ timer_setup(&slot->detect_timer, atmci_detect_change, 0);
+
+ ret = request_irq(gpio_to_irq(slot->detect_pin),
+ atmci_detect_interrupt,
+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+ "mmc-detect", slot);
+ if (ret) {
+ dev_dbg(&mmc->class_dev,
+ "could not request IRQ %d for detect pin\n",
+ gpio_to_irq(slot->detect_pin));
+ slot->detect_pin = -EBUSY;
+ }
+ }
+
+ atmci_init_debugfs(slot);
+
+ return 0;
+}
+
+static void atmci_cleanup_slot(struct atmel_mci_slot *slot,
+ unsigned int id)
+{
+ /* Debugfs stuff is cleaned up by mmc core */
+
+ set_bit(ATMCI_SHUTDOWN, &slot->flags);
+ smp_wmb();
+
+ mmc_remove_host(slot->mmc);
+
+ if (gpio_is_valid(slot->detect_pin)) {
+ int pin = slot->detect_pin;
+
+ free_irq(gpio_to_irq(pin), slot);
+ del_timer_sync(&slot->detect_timer);
+ }
+
+ slot->host->slot[id] = NULL;
+ mmc_free_host(slot->mmc);
+}
+
+static int atmci_configure_dma(struct atmel_mci *host)
+{
+ host->dma.chan = dma_request_chan(&host->pdev->dev, "rxtx");
+
+ if (PTR_ERR(host->dma.chan) == -ENODEV) {
+ struct mci_platform_data *pdata = host->pdev->dev.platform_data;
+ dma_cap_mask_t mask;
+
+ if (!pdata || !pdata->dma_filter)
+ return -ENODEV;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ host->dma.chan = dma_request_channel(mask, pdata->dma_filter,
+ pdata->dma_slave);
+ if (!host->dma.chan)
+ host->dma.chan = ERR_PTR(-ENODEV);
+ }
+
+ if (IS_ERR(host->dma.chan))
+ return PTR_ERR(host->dma.chan);
+
+ dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
+
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
+
+ return 0;
+}
+
+/*
+ * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
+ * HSMCI provides DMA support and a new config register but no more supports
+ * PDC.
+ */
+static void atmci_get_cap(struct atmel_mci *host)
+{
+ unsigned int version;
+
+ version = atmci_get_version(host);
+ dev_info(&host->pdev->dev,
+ "version: 0x%x\n", version);
+
+ host->caps.has_dma_conf_reg = false;
+ host->caps.has_pdc = true;
+ host->caps.has_cfg_reg = false;
+ host->caps.has_cstor_reg = false;
+ host->caps.has_highspeed = false;
+ host->caps.has_rwproof = false;
+ host->caps.has_odd_clk_div = false;
+ host->caps.has_bad_data_ordering = true;
+ host->caps.need_reset_after_xfer = true;
+ host->caps.need_blksz_mul_4 = true;
+ host->caps.need_notbusy_for_read_ops = false;
+
+ /* keep only major version number */
+ switch (version & 0xf00) {
+ case 0x600:
+ case 0x500:
+ host->caps.has_odd_clk_div = true;
+ fallthrough;
+ case 0x400:
+ case 0x300:
+ host->caps.has_dma_conf_reg = true;
+ host->caps.has_pdc = false;
+ host->caps.has_cfg_reg = true;
+ host->caps.has_cstor_reg = true;
+ host->caps.has_highspeed = true;
+ fallthrough;
+ case 0x200:
+ host->caps.has_rwproof = true;
+ host->caps.need_blksz_mul_4 = false;
+ host->caps.need_notbusy_for_read_ops = true;
+ fallthrough;
+ case 0x100:
+ host->caps.has_bad_data_ordering = false;
+ host->caps.need_reset_after_xfer = false;
+ fallthrough;
+ case 0x0:
+ break;
+ default:
+ host->caps.has_pdc = false;
+ dev_warn(&host->pdev->dev,
+ "Unmanaged mci version, set minimum capabilities\n");
+ break;
+ }
+}
+
+static int atmci_probe(struct platform_device *pdev)
+{
+ struct mci_platform_data *pdata;
+ struct atmel_mci *host;
+ struct resource *regs;
+ unsigned int nr_slots;
+ int irq;
+ int ret, i;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ pdata = atmci_of_init(pdev);
+ if (IS_ERR(pdata)) {
+ dev_err(&pdev->dev, "platform data not available\n");
+ return PTR_ERR(pdata);
+ }
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->pdev = pdev;
+ spin_lock_init(&host->lock);
+ INIT_LIST_HEAD(&host->queue);
+
+ host->mck = devm_clk_get(&pdev->dev, "mci_clk");
+ if (IS_ERR(host->mck))
+ return PTR_ERR(host->mck);
+
+ host->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
+ if (!host->regs)
+ return -ENOMEM;
+
+ ret = clk_prepare_enable(host->mck);
+ if (ret)
+ return ret;
+
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+ host->bus_hz = clk_get_rate(host->mck);
+
+ host->mapbase = regs->start;
+
+ tasklet_setup(&host->tasklet, atmci_tasklet_func);
+
+ ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
+ if (ret) {
+ clk_disable_unprepare(host->mck);
+ return ret;
+ }
+
+ /* Get MCI capabilities and set operations according to it */
+ atmci_get_cap(host);
+ ret = atmci_configure_dma(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_probe_defer;
+ if (ret == 0) {
+ host->prepare_data = &atmci_prepare_data_dma;
+ host->submit_data = &atmci_submit_data_dma;
+ host->stop_transfer = &atmci_stop_transfer_dma;
+ } else if (host->caps.has_pdc) {
+ dev_info(&pdev->dev, "using PDC\n");
+ host->prepare_data = &atmci_prepare_data_pdc;
+ host->submit_data = &atmci_submit_data_pdc;
+ host->stop_transfer = &atmci_stop_transfer_pdc;
+ } else {
+ dev_info(&pdev->dev, "using PIO\n");
+ host->prepare_data = &atmci_prepare_data;
+ host->submit_data = &atmci_submit_data;
+ host->stop_transfer = &atmci_stop_transfer;
+ }
+
+ platform_set_drvdata(pdev, host);
+
+ timer_setup(&host->timer, atmci_timeout_timer, 0);
+
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ /* We need at least one slot to succeed */
+ nr_slots = 0;
+ ret = -ENODEV;
+ if (pdata->slot[0].bus_width) {
+ ret = atmci_init_slot(host, &pdata->slot[0],
+ 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA);
+ if (!ret) {
+ nr_slots++;
+ host->buf_size = host->slot[0]->mmc->max_req_size;
+ }
+ }
+ if (pdata->slot[1].bus_width) {
+ ret = atmci_init_slot(host, &pdata->slot[1],
+ 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB);
+ if (!ret) {
+ nr_slots++;
+ if (host->slot[1]->mmc->max_req_size > host->buf_size)
+ host->buf_size =
+ host->slot[1]->mmc->max_req_size;
+ }
+ }
+
+ if (!nr_slots) {
+ dev_err(&pdev->dev, "init failed: no slot defined\n");
+ goto err_init_slot;
+ }
+
+ if (!host->caps.has_rwproof) {
+ host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size,
+ &host->buf_phys_addr,
+ GFP_KERNEL);
+ if (!host->buffer) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "buffer allocation failed\n");
+ goto err_dma_alloc;
+ }
+ }
+
+ dev_info(&pdev->dev,
+ "Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
+ host->mapbase, irq, nr_slots);
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
+ return 0;
+
+err_dma_alloc:
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+ if (host->slot[i])
+ atmci_cleanup_slot(host->slot[i], i);
+ }
+err_init_slot:
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
+ del_timer_sync(&host->timer);
+ if (!IS_ERR(host->dma.chan))
+ dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
+ free_irq(irq, host);
+ return ret;
+}
+
+static int atmci_remove(struct platform_device *pdev)
+{
+ struct atmel_mci *host = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ if (host->buffer)
+ dma_free_coherent(&pdev->dev, host->buf_size,
+ host->buffer, host->buf_phys_addr);
+
+ for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
+ if (host->slot[i])
+ atmci_cleanup_slot(host->slot[i], i);
+ }
+
+ atmci_writel(host, ATMCI_IDR, ~0UL);
+ atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+ atmci_readl(host, ATMCI_SR);
+
+ del_timer_sync(&host->timer);
+ if (!IS_ERR(host->dma.chan))
+ dma_release_channel(host->dma.chan);
+
+ free_irq(platform_get_irq(pdev, 0), host);
+
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmci_runtime_suspend(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(host->mck);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
+}
+
+static int atmci_runtime_resume(struct device *dev)
+{
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ pinctrl_select_default_state(dev);
+
+ return clk_prepare_enable(host->mck);
+}
+#endif
+
+static const struct dev_pm_ops atmci_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL)
+};
+
+static struct platform_driver atmci_driver = {
+ .probe = atmci_probe,
+ .remove = atmci_remove,
+ .driver = {
+ .name = "atmel_mci",
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = of_match_ptr(atmci_dt_ids),
+ .pm = &atmci_dev_pm_ops,
+ },
+};
+module_platform_driver(atmci_driver);
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
+MODULE_LICENSE("GPL v2");