summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/dw_mmc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/dw_mmc.h')
-rw-r--r--drivers/mmc/host/dw_mmc.h589
1 files changed, 589 insertions, 0 deletions
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
new file mode 100644
index 000000000..4ed81f94f
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc.h
@@ -0,0 +1,589 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Synopsys DesignWare Multimedia Card Interface driver
+ * (Based on NXP driver for lpc 31xx)
+ *
+ * Copyright (C) 2009 NXP Semiconductors
+ * Copyright (C) 2009, 2010 Imagination Technologies Ltd.
+ */
+
+#ifndef _DW_MMC_H_
+#define _DW_MMC_H_
+
+#include <linux/scatterlist.h>
+#include <linux/mmc/core.h>
+#include <linux/dmaengine.h>
+#include <linux/reset.h>
+#include <linux/fault-inject.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+
+enum dw_mci_state {
+ STATE_IDLE = 0,
+ STATE_SENDING_CMD,
+ STATE_SENDING_DATA,
+ STATE_DATA_BUSY,
+ STATE_SENDING_STOP,
+ STATE_DATA_ERROR,
+ STATE_SENDING_CMD11,
+ STATE_WAITING_CMD11_DONE,
+};
+
+enum {
+ EVENT_CMD_COMPLETE = 0,
+ EVENT_XFER_COMPLETE,
+ EVENT_DATA_COMPLETE,
+ EVENT_DATA_ERROR,
+};
+
+enum dw_mci_cookie {
+ COOKIE_UNMAPPED,
+ COOKIE_PRE_MAPPED, /* mapped by pre_req() of dwmmc */
+ COOKIE_MAPPED, /* mapped by prepare_data() of dwmmc */
+};
+
+struct mmc_data;
+
+enum {
+ TRANS_MODE_PIO = 0,
+ TRANS_MODE_IDMAC,
+ TRANS_MODE_EDMAC
+};
+
+struct dw_mci_dma_slave {
+ struct dma_chan *ch;
+ enum dma_transfer_direction direction;
+};
+
+/**
+ * struct dw_mci - MMC controller state shared between all slots
+ * @lock: Spinlock protecting the queue and associated data.
+ * @irq_lock: Spinlock protecting the INTMASK setting.
+ * @regs: Pointer to MMIO registers.
+ * @fifo_reg: Pointer to MMIO registers for data FIFO
+ * @sg: Scatterlist entry currently being processed by PIO code, if any.
+ * @sg_miter: PIO mapping scatterlist iterator.
+ * @mrq: The request currently being processed on @slot,
+ * or NULL if the controller is idle.
+ * @cmd: The command currently being sent to the card, or NULL.
+ * @data: The data currently being transferred, or NULL if no data
+ * transfer is in progress.
+ * @stop_abort: The command currently prepared for stoping transfer.
+ * @prev_blksz: The former transfer blksz record.
+ * @timing: Record of current ios timing.
+ * @use_dma: Which DMA channel is in use for the current transfer, zero
+ * denotes PIO mode.
+ * @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
+ * @sg_dma: Bus address of DMA buffer.
+ * @sg_cpu: Virtual address of DMA buffer.
+ * @dma_ops: Pointer to platform-specific DMA callbacks.
+ * @cmd_status: Snapshot of SR taken upon completion of the current
+ * @ring_size: Buffer size for idma descriptors.
+ * command. Only valid when EVENT_CMD_COMPLETE is pending.
+ * @dms: structure of slave-dma private data.
+ * @phy_regs: physical address of controller's register map
+ * @data_status: Snapshot of SR taken upon completion of the current
+ * data transfer. Only valid when EVENT_DATA_COMPLETE or
+ * EVENT_DATA_ERROR is pending.
+ * @stop_cmdr: Value to be loaded into CMDR when the stop command is
+ * to be sent.
+ * @dir_status: Direction of current transfer.
+ * @tasklet: Tasklet running the request state machine.
+ * @pending_events: Bitmask of events flagged by the interrupt handler
+ * to be processed by the tasklet.
+ * @completed_events: Bitmask of events which the state machine has
+ * processed.
+ * @state: Tasklet state.
+ * @queue: List of slots waiting for access to the controller.
+ * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus
+ * rate and timeout calculations.
+ * @current_speed: Configured rate of the controller.
+ * @minimum_speed: Stored minimum rate of the controller.
+ * @fifoth_val: The value of FIFOTH register.
+ * @verid: Denote Version ID.
+ * @dev: Device associated with the MMC controller.
+ * @pdata: Platform data associated with the MMC controller.
+ * @drv_data: Driver specific data for identified variant of the controller
+ * @priv: Implementation defined private data.
+ * @biu_clk: Pointer to bus interface unit clock instance.
+ * @ciu_clk: Pointer to card interface unit clock instance.
+ * @slot: Slots sharing this MMC controller.
+ * @fifo_depth: depth of FIFO.
+ * @data_addr_override: override fifo reg offset with this value.
+ * @wm_aligned: force fifo watermark equal with data length in PIO mode.
+ * Set as true if alignment is needed.
+ * @data_shift: log2 of FIFO item size.
+ * @part_buf_start: Start index in part_buf.
+ * @part_buf_count: Bytes of partial data in part_buf.
+ * @part_buf: Simple buffer for partial fifo reads/writes.
+ * @push_data: Pointer to FIFO push function.
+ * @pull_data: Pointer to FIFO pull function.
+ * @quirks: Set of quirks that apply to specific versions of the IP.
+ * @vqmmc_enabled: Status of vqmmc, should be true or false.
+ * @irq_flags: The flags to be passed to request_irq.
+ * @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
+ * @cmd11_timer: Timer for SD3.0 voltage switch over scheme.
+ * @cto_timer: Timer for broken command transfer over scheme.
+ * @dto_timer: Timer for broken data transfer over scheme.
+ *
+ * Locking
+ * =======
+ *
+ * @lock is a softirq-safe spinlock protecting @queue as well as
+ * @slot, @mrq and @state. These must always be updated
+ * at the same time while holding @lock.
+ * The @mrq field of struct dw_mci_slot is also protected by @lock,
+ * and must always be written at the same time as the slot is added to
+ * @queue.
+ *
+ * @irq_lock is an irq-safe spinlock protecting the INTMASK register
+ * to allow the interrupt handler to modify it directly. Held for only long
+ * enough to read-modify-write INTMASK and no other locks are grabbed when
+ * holding this one.
+ *
+ * @pending_events and @completed_events are accessed using atomic bit
+ * operations, so they don't need any locking.
+ *
+ * None of the fields touched by the interrupt handler need any
+ * locking. However, ordering is important: Before EVENT_DATA_ERROR or
+ * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
+ * interrupts must be disabled and @data_status updated with a
+ * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
+ * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
+ * bytes_xfered field of @data must be written. This is ensured by
+ * using barriers.
+ */
+struct dw_mci {
+ spinlock_t lock;
+ spinlock_t irq_lock;
+ void __iomem *regs;
+ void __iomem *fifo_reg;
+ u32 data_addr_override;
+ bool wm_aligned;
+
+ struct scatterlist *sg;
+ struct sg_mapping_iter sg_miter;
+
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_data *data;
+ struct mmc_command stop_abort;
+ unsigned int prev_blksz;
+ unsigned char timing;
+
+ /* DMA interface members*/
+ int use_dma;
+ int using_dma;
+ int dma_64bit_address;
+
+ dma_addr_t sg_dma;
+ void *sg_cpu;
+ const struct dw_mci_dma_ops *dma_ops;
+ /* For idmac */
+ unsigned int ring_size;
+
+ /* For edmac */
+ struct dw_mci_dma_slave *dms;
+ /* Registers's physical base address */
+ resource_size_t phy_regs;
+
+ u32 cmd_status;
+ u32 data_status;
+ u32 stop_cmdr;
+ u32 dir_status;
+ struct tasklet_struct tasklet;
+ unsigned long pending_events;
+ unsigned long completed_events;
+ enum dw_mci_state state;
+ struct list_head queue;
+
+ u32 bus_hz;
+ u32 current_speed;
+ u32 minimum_speed;
+ u32 fifoth_val;
+ u16 verid;
+ struct device *dev;
+ struct dw_mci_board *pdata;
+ const struct dw_mci_drv_data *drv_data;
+ void *priv;
+ struct clk *biu_clk;
+ struct clk *ciu_clk;
+ struct dw_mci_slot *slot;
+
+ /* FIFO push and pull */
+ int fifo_depth;
+ int data_shift;
+ u8 part_buf_start;
+ u8 part_buf_count;
+ union {
+ u16 part_buf16;
+ u32 part_buf32;
+ u64 part_buf;
+ };
+ void (*push_data)(struct dw_mci *host, void *buf, int cnt);
+ void (*pull_data)(struct dw_mci *host, void *buf, int cnt);
+
+ u32 quirks;
+ bool vqmmc_enabled;
+ unsigned long irq_flags; /* IRQ flags */
+ int irq;
+
+ int sdio_id0;
+
+ struct timer_list cmd11_timer;
+ struct timer_list cto_timer;
+ struct timer_list dto_timer;
+
+#ifdef CONFIG_FAULT_INJECTION
+ struct fault_attr fail_data_crc;
+ struct hrtimer fault_timer;
+#endif
+};
+
+/* DMA ops for Internal/External DMAC interface */
+struct dw_mci_dma_ops {
+ /* DMA Ops */
+ int (*init)(struct dw_mci *host);
+ int (*start)(struct dw_mci *host, unsigned int sg_len);
+ void (*complete)(void *host);
+ void (*stop)(struct dw_mci *host);
+ void (*cleanup)(struct dw_mci *host);
+ void (*exit)(struct dw_mci *host);
+};
+
+struct dma_pdata;
+
+/* Board platform data */
+struct dw_mci_board {
+ unsigned int bus_hz; /* Clock speed at the cclk_in pad */
+
+ u32 caps; /* Capabilities */
+ u32 caps2; /* More capabilities */
+ u32 pm_caps; /* PM capabilities */
+ /*
+ * Override fifo depth. If 0, autodetect it from the FIFOTH register,
+ * but note that this may not be reliable after a bootloader has used
+ * it.
+ */
+ unsigned int fifo_depth;
+
+ /* delay in mS before detecting cards after interrupt */
+ u32 detect_delay_ms;
+
+ struct reset_control *rstc;
+ struct dw_mci_dma_ops *dma_ops;
+ struct dma_pdata *data;
+};
+
+/* Support for longer data read timeout */
+#define DW_MMC_QUIRK_EXTENDED_TMOUT BIT(0)
+
+#define DW_MMC_240A 0x240a
+#define DW_MMC_280A 0x280a
+
+#define SDMMC_CTRL 0x000
+#define SDMMC_PWREN 0x004
+#define SDMMC_CLKDIV 0x008
+#define SDMMC_CLKSRC 0x00c
+#define SDMMC_CLKENA 0x010
+#define SDMMC_TMOUT 0x014
+#define SDMMC_CTYPE 0x018
+#define SDMMC_BLKSIZ 0x01c
+#define SDMMC_BYTCNT 0x020
+#define SDMMC_INTMASK 0x024
+#define SDMMC_CMDARG 0x028
+#define SDMMC_CMD 0x02c
+#define SDMMC_RESP0 0x030
+#define SDMMC_RESP1 0x034
+#define SDMMC_RESP2 0x038
+#define SDMMC_RESP3 0x03c
+#define SDMMC_MINTSTS 0x040
+#define SDMMC_RINTSTS 0x044
+#define SDMMC_STATUS 0x048
+#define SDMMC_FIFOTH 0x04c
+#define SDMMC_CDETECT 0x050
+#define SDMMC_WRTPRT 0x054
+#define SDMMC_GPIO 0x058
+#define SDMMC_TCBCNT 0x05c
+#define SDMMC_TBBCNT 0x060
+#define SDMMC_DEBNCE 0x064
+#define SDMMC_USRID 0x068
+#define SDMMC_VERID 0x06c
+#define SDMMC_HCON 0x070
+#define SDMMC_UHS_REG 0x074
+#define SDMMC_RST_N 0x078
+#define SDMMC_BMOD 0x080
+#define SDMMC_PLDMND 0x084
+#define SDMMC_DBADDR 0x088
+#define SDMMC_IDSTS 0x08c
+#define SDMMC_IDINTEN 0x090
+#define SDMMC_DSCADDR 0x094
+#define SDMMC_BUFADDR 0x098
+#define SDMMC_CDTHRCTL 0x100
+#define SDMMC_UHS_REG_EXT 0x108
+#define SDMMC_DDR_REG 0x10c
+#define SDMMC_ENABLE_SHIFT 0x110
+#define SDMMC_DATA(x) (x)
+/*
+ * Registers to support idmac 64-bit address mode
+ */
+#define SDMMC_DBADDRL 0x088
+#define SDMMC_DBADDRU 0x08c
+#define SDMMC_IDSTS64 0x090
+#define SDMMC_IDINTEN64 0x094
+#define SDMMC_DSCADDRL 0x098
+#define SDMMC_DSCADDRU 0x09c
+#define SDMMC_BUFADDRL 0x0A0
+#define SDMMC_BUFADDRU 0x0A4
+
+/*
+ * Data offset is difference according to Version
+ * Lower than 2.40a : data register offest is 0x100
+ */
+#define DATA_OFFSET 0x100
+#define DATA_240A_OFFSET 0x200
+
+/* shift bit field */
+#define _SBF(f, v) ((v) << (f))
+
+/* Control register defines */
+#define SDMMC_CTRL_USE_IDMAC BIT(25)
+#define SDMMC_CTRL_CEATA_INT_EN BIT(11)
+#define SDMMC_CTRL_SEND_AS_CCSD BIT(10)
+#define SDMMC_CTRL_SEND_CCSD BIT(9)
+#define SDMMC_CTRL_ABRT_READ_DATA BIT(8)
+#define SDMMC_CTRL_SEND_IRQ_RESP BIT(7)
+#define SDMMC_CTRL_READ_WAIT BIT(6)
+#define SDMMC_CTRL_DMA_ENABLE BIT(5)
+#define SDMMC_CTRL_INT_ENABLE BIT(4)
+#define SDMMC_CTRL_DMA_RESET BIT(2)
+#define SDMMC_CTRL_FIFO_RESET BIT(1)
+#define SDMMC_CTRL_RESET BIT(0)
+/* Clock Enable register defines */
+#define SDMMC_CLKEN_LOW_PWR BIT(16)
+#define SDMMC_CLKEN_ENABLE BIT(0)
+/* time-out register defines */
+#define SDMMC_TMOUT_DATA(n) _SBF(8, (n))
+#define SDMMC_TMOUT_DATA_MSK 0xFFFFFF00
+#define SDMMC_TMOUT_RESP(n) ((n) & 0xFF)
+#define SDMMC_TMOUT_RESP_MSK 0xFF
+/* card-type register defines */
+#define SDMMC_CTYPE_8BIT BIT(16)
+#define SDMMC_CTYPE_4BIT BIT(0)
+#define SDMMC_CTYPE_1BIT 0
+/* Interrupt status & mask register defines */
+#define SDMMC_INT_SDIO(n) BIT(16 + (n))
+#define SDMMC_INT_EBE BIT(15)
+#define SDMMC_INT_ACD BIT(14)
+#define SDMMC_INT_SBE BIT(13)
+#define SDMMC_INT_HLE BIT(12)
+#define SDMMC_INT_FRUN BIT(11)
+#define SDMMC_INT_HTO BIT(10)
+#define SDMMC_INT_VOLT_SWITCH BIT(10) /* overloads bit 10! */
+#define SDMMC_INT_DRTO BIT(9)
+#define SDMMC_INT_RTO BIT(8)
+#define SDMMC_INT_DCRC BIT(7)
+#define SDMMC_INT_RCRC BIT(6)
+#define SDMMC_INT_RXDR BIT(5)
+#define SDMMC_INT_TXDR BIT(4)
+#define SDMMC_INT_DATA_OVER BIT(3)
+#define SDMMC_INT_CMD_DONE BIT(2)
+#define SDMMC_INT_RESP_ERR BIT(1)
+#define SDMMC_INT_CD BIT(0)
+#define SDMMC_INT_ERROR 0xbfc2
+/* Command register defines */
+#define SDMMC_CMD_START BIT(31)
+#define SDMMC_CMD_USE_HOLD_REG BIT(29)
+#define SDMMC_CMD_VOLT_SWITCH BIT(28)
+#define SDMMC_CMD_CCS_EXP BIT(23)
+#define SDMMC_CMD_CEATA_RD BIT(22)
+#define SDMMC_CMD_UPD_CLK BIT(21)
+#define SDMMC_CMD_INIT BIT(15)
+#define SDMMC_CMD_STOP BIT(14)
+#define SDMMC_CMD_PRV_DAT_WAIT BIT(13)
+#define SDMMC_CMD_SEND_STOP BIT(12)
+#define SDMMC_CMD_STRM_MODE BIT(11)
+#define SDMMC_CMD_DAT_WR BIT(10)
+#define SDMMC_CMD_DAT_EXP BIT(9)
+#define SDMMC_CMD_RESP_CRC BIT(8)
+#define SDMMC_CMD_RESP_LONG BIT(7)
+#define SDMMC_CMD_RESP_EXP BIT(6)
+#define SDMMC_CMD_INDX(n) ((n) & 0x1F)
+/* Status register defines */
+#define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF)
+#define SDMMC_STATUS_DMA_REQ BIT(31)
+#define SDMMC_STATUS_BUSY BIT(9)
+/* FIFOTH register defines */
+#define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \
+ ((r) & 0xFFF) << 16 | \
+ ((t) & 0xFFF))
+/* HCON register defines */
+#define DMA_INTERFACE_IDMA (0x0)
+#define DMA_INTERFACE_DWDMA (0x1)
+#define DMA_INTERFACE_GDMA (0x2)
+#define DMA_INTERFACE_NODMA (0x3)
+#define SDMMC_GET_TRANS_MODE(x) (((x)>>16) & 0x3)
+#define SDMMC_GET_SLOT_NUM(x) ((((x)>>1) & 0x1F) + 1)
+#define SDMMC_GET_HDATA_WIDTH(x) (((x)>>7) & 0x7)
+#define SDMMC_GET_ADDR_CONFIG(x) (((x)>>27) & 0x1)
+/* Internal DMAC interrupt defines */
+#define SDMMC_IDMAC_INT_AI BIT(9)
+#define SDMMC_IDMAC_INT_NI BIT(8)
+#define SDMMC_IDMAC_INT_CES BIT(5)
+#define SDMMC_IDMAC_INT_DU BIT(4)
+#define SDMMC_IDMAC_INT_FBE BIT(2)
+#define SDMMC_IDMAC_INT_RI BIT(1)
+#define SDMMC_IDMAC_INT_TI BIT(0)
+/* Internal DMAC bus mode bits */
+#define SDMMC_IDMAC_ENABLE BIT(7)
+#define SDMMC_IDMAC_FB BIT(1)
+#define SDMMC_IDMAC_SWRESET BIT(0)
+/* H/W reset */
+#define SDMMC_RST_HWACTIVE 0x1
+/* Version ID register define */
+#define SDMMC_GET_VERID(x) ((x) & 0xFFFF)
+/* Card read threshold */
+#define SDMMC_SET_THLD(v, x) (((v) & 0xFFF) << 16 | (x))
+#define SDMMC_CARD_WR_THR_EN BIT(2)
+#define SDMMC_CARD_RD_THR_EN BIT(0)
+/* UHS-1 register defines */
+#define SDMMC_UHS_DDR BIT(16)
+#define SDMMC_UHS_18V BIT(0)
+/* DDR register defines */
+#define SDMMC_DDR_HS400 BIT(31)
+/* Enable shift register defines */
+#define SDMMC_ENABLE_PHASE BIT(0)
+/* All ctrl reset bits */
+#define SDMMC_CTRL_ALL_RESET_FLAGS \
+ (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET)
+
+/* FIFO register access macros. These should not change the data endian-ness
+ * as they are written to memory to be dealt with by the upper layers
+ */
+#define mci_fifo_readw(__reg) __raw_readw(__reg)
+#define mci_fifo_readl(__reg) __raw_readl(__reg)
+#define mci_fifo_readq(__reg) __raw_readq(__reg)
+
+#define mci_fifo_writew(__value, __reg) __raw_writew(__reg, __value)
+#define mci_fifo_writel(__value, __reg) __raw_writel(__reg, __value)
+#define mci_fifo_writeq(__value, __reg) __raw_writeq(__reg, __value)
+
+/* Register access macros */
+#define mci_readl(dev, reg) \
+ readl_relaxed((dev)->regs + SDMMC_##reg)
+#define mci_writel(dev, reg, value) \
+ writel_relaxed((value), (dev)->regs + SDMMC_##reg)
+
+/* 16-bit FIFO access macros */
+#define mci_readw(dev, reg) \
+ readw_relaxed((dev)->regs + SDMMC_##reg)
+#define mci_writew(dev, reg, value) \
+ writew_relaxed((value), (dev)->regs + SDMMC_##reg)
+
+/* 64-bit FIFO access macros */
+#ifdef readq
+#define mci_readq(dev, reg) \
+ readq_relaxed((dev)->regs + SDMMC_##reg)
+#define mci_writeq(dev, reg, value) \
+ writeq_relaxed((value), (dev)->regs + SDMMC_##reg)
+#else
+/*
+ * Dummy readq implementation for architectures that don't define it.
+ *
+ * We would assume that none of these architectures would configure
+ * the IP block with a 64bit FIFO width, so this code will never be
+ * executed on those machines. Defining these macros here keeps the
+ * rest of the code free from ifdefs.
+ */
+#define mci_readq(dev, reg) \
+ (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg))
+#define mci_writeq(dev, reg, value) \
+ (*(volatile u64 __force *)((dev)->regs + SDMMC_##reg) = (value))
+
+#define __raw_writeq(__value, __reg) \
+ (*(volatile u64 __force *)(__reg) = (__value))
+#define __raw_readq(__reg) (*(volatile u64 __force *)(__reg))
+#endif
+
+extern int dw_mci_probe(struct dw_mci *host);
+extern void dw_mci_remove(struct dw_mci *host);
+#ifdef CONFIG_PM
+extern int dw_mci_runtime_suspend(struct device *device);
+extern int dw_mci_runtime_resume(struct device *device);
+#endif
+
+/**
+ * struct dw_mci_slot - MMC slot state
+ * @mmc: The mmc_host representing this slot.
+ * @host: The MMC controller this slot is using.
+ * @ctype: Card type for this slot.
+ * @mrq: mmc_request currently being processed or waiting to be
+ * processed, or NULL when the slot is idle.
+ * @queue_node: List node for placing this node in the @queue list of
+ * &struct dw_mci.
+ * @clock: Clock rate configured by set_ios(). Protected by host->lock.
+ * @__clk_old: The last clock value that was requested from core.
+ * Keeping track of this helps us to avoid spamming the console.
+ * @flags: Random state bits associated with the slot.
+ * @id: Number of this slot.
+ * @sdio_id: Number of this slot in the SDIO interrupt registers.
+ */
+struct dw_mci_slot {
+ struct mmc_host *mmc;
+ struct dw_mci *host;
+
+ u32 ctype;
+
+ struct mmc_request *mrq;
+ struct list_head queue_node;
+
+ unsigned int clock;
+ unsigned int __clk_old;
+
+ unsigned long flags;
+#define DW_MMC_CARD_PRESENT 0
+#define DW_MMC_CARD_NEED_INIT 1
+#define DW_MMC_CARD_NO_LOW_PWR 2
+#define DW_MMC_CARD_NO_USE_HOLD 3
+#define DW_MMC_CARD_NEEDS_POLL 4
+ int id;
+ int sdio_id;
+};
+
+/**
+ * dw_mci driver data - dw-mshc implementation specific driver data.
+ * @caps: mmc subsystem specified capabilities of the controller(s).
+ * @num_caps: number of capabilities specified by @caps.
+ * @common_caps: mmc subsystem specified capabilities applicable to all of
+ * the controllers
+ * @init: early implementation specific initialization.
+ * @set_ios: handle bus specific extensions.
+ * @parse_dt: parse implementation specific device tree properties.
+ * @execute_tuning: implementation specific tuning procedure.
+ * @set_data_timeout: implementation specific timeout.
+ * @get_drto_clks: implementation specific cycle count for data read timeout.
+ *
+ * Provide controller implementation specific extensions. The usage of this
+ * data structure is fully optional and usage of each member in this structure
+ * is optional as well.
+ */
+struct dw_mci_drv_data {
+ unsigned long *caps;
+ u32 num_caps;
+ u32 common_caps;
+ int (*init)(struct dw_mci *host);
+ void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
+ int (*parse_dt)(struct dw_mci *host);
+ int (*execute_tuning)(struct dw_mci_slot *slot, u32 opcode);
+ int (*prepare_hs400_tuning)(struct dw_mci *host,
+ struct mmc_ios *ios);
+ int (*switch_voltage)(struct mmc_host *mmc,
+ struct mmc_ios *ios);
+ void (*set_data_timeout)(struct dw_mci *host,
+ unsigned int timeout_ns);
+ u32 (*get_drto_clks)(struct dw_mci *host);
+};
+#endif /* _DW_MMC_H_ */