summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/qca
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/qca')
-rw-r--r--drivers/net/dsa/qca/Kconfig17
-rw-r--r--drivers/net/dsa/qca/Makefile4
-rw-r--r--drivers/net/dsa/qca/ar9331.c1135
-rw-r--r--drivers/net/dsa/qca/qca8k-8xxx.c2090
-rw-r--r--drivers/net/dsa/qca/qca8k-common.c1234
-rw-r--r--drivers/net/dsa/qca/qca8k.h515
6 files changed, 4995 insertions, 0 deletions
diff --git a/drivers/net/dsa/qca/Kconfig b/drivers/net/dsa/qca/Kconfig
new file mode 100644
index 000000000..ba3397473
--- /dev/null
+++ b/drivers/net/dsa/qca/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NET_DSA_AR9331
+ tristate "Qualcomm Atheros AR9331 Ethernet switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_AR9331
+ select REGMAP
+ help
+ This enables support for the Qualcomm Atheros AR9331 built-in Ethernet
+ switch.
+
+config NET_DSA_QCA8K
+ tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
+ select NET_DSA_TAG_QCA
+ select REGMAP
+ help
+ This enables support for the Qualcomm Atheros QCA8K Ethernet
+ switch chips.
diff --git a/drivers/net/dsa/qca/Makefile b/drivers/net/dsa/qca/Makefile
new file mode 100644
index 000000000..701f1d199
--- /dev/null
+++ b/drivers/net/dsa/qca/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o
+obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
+qca8k-y += qca8k-common.o qca8k-8xxx.o
diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
new file mode 100644
index 000000000..e7b98b864
--- /dev/null
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -0,0 +1,1135 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2019 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+/*
+ * +----------------------+
+ * GMAC1----RGMII----|--MAC0 |
+ * \---MDIO1----|--REGs |----MDIO3----\
+ * | | | +------+
+ * | | +--| |
+ * | MAC1-|----RMII--M-----| PHY0 |-o P0
+ * | | | | +------+
+ * | | | +--| |
+ * | MAC2-|----RMII--------| PHY1 |-o P1
+ * | | | | +------+
+ * | | | +--| |
+ * | MAC3-|----RMII--------| PHY2 |-o P2
+ * | | | | +------+
+ * | | | +--| |
+ * | MAC4-|----RMII--------| PHY3 |-o P3
+ * | | | | +------+
+ * | | | +--| |
+ * | MAC5-|--+-RMII--M-----|-PHY4-|-o P4
+ * | | | | +------+
+ * +----------------------+ | \--CFG_SW_PHY_SWAP
+ * GMAC0---------------RMII--------------------/ \-CFG_SW_PHY_ADDR_SWAP
+ * \---MDIO0--NC
+ *
+ * GMAC0 and MAC5 are connected together and use same PHY. Depending on
+ * configuration it can be PHY4 (default) or PHY0. Only GMAC0 or MAC5 can be
+ * used at same time. If GMAC0 is used (default) then MAC5 should be disabled.
+ *
+ * CFG_SW_PHY_SWAP - swap connections of PHY0 and PHY4. If this bit is not set
+ * PHY4 is connected to GMAC0/MAC5 bundle and PHY0 is connected to MAC1. If this
+ * bit is set, PHY4 is connected to MAC1 and PHY0 is connected to GMAC0/MAC5
+ * bundle.
+ *
+ * CFG_SW_PHY_ADDR_SWAP - swap addresses of PHY0 and PHY4
+ *
+ * CFG_SW_PHY_SWAP and CFG_SW_PHY_ADDR_SWAP are part of SoC specific register
+ * set and not related to switch internal registers.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/of_mdio.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <net/dsa.h>
+
+#define AR9331_SW_NAME "ar9331_switch"
+#define AR9331_SW_PORTS 6
+
+/* dummy reg to change page */
+#define AR9331_SW_REG_PAGE 0x40000
+
+/* Global Interrupt */
+#define AR9331_SW_REG_GINT 0x10
+#define AR9331_SW_REG_GINT_MASK 0x14
+#define AR9331_SW_GINT_PHY_INT BIT(2)
+
+#define AR9331_SW_REG_FLOOD_MASK 0x2c
+#define AR9331_SW_FLOOD_MASK_BROAD_TO_CPU BIT(26)
+
+#define AR9331_SW_REG_GLOBAL_CTRL 0x30
+#define AR9331_SW_GLOBAL_CTRL_MFS_M GENMASK(13, 0)
+
+#define AR9331_SW_REG_MDIO_CTRL 0x98
+#define AR9331_SW_MDIO_CTRL_BUSY BIT(31)
+#define AR9331_SW_MDIO_CTRL_MASTER_EN BIT(30)
+#define AR9331_SW_MDIO_CTRL_CMD_READ BIT(27)
+#define AR9331_SW_MDIO_CTRL_PHY_ADDR_M GENMASK(25, 21)
+#define AR9331_SW_MDIO_CTRL_REG_ADDR_M GENMASK(20, 16)
+#define AR9331_SW_MDIO_CTRL_DATA_M GENMASK(16, 0)
+
+#define AR9331_SW_REG_PORT_STATUS(_port) (0x100 + (_port) * 0x100)
+
+/* FLOW_LINK_EN - enable mac flow control config auto-neg with phy.
+ * If not set, mac can be config by software.
+ */
+#define AR9331_SW_PORT_STATUS_FLOW_LINK_EN BIT(12)
+
+/* LINK_EN - If set, MAC is configured from PHY link status.
+ * If not set, MAC should be configured by software.
+ */
+#define AR9331_SW_PORT_STATUS_LINK_EN BIT(9)
+#define AR9331_SW_PORT_STATUS_DUPLEX_MODE BIT(6)
+#define AR9331_SW_PORT_STATUS_RX_FLOW_EN BIT(5)
+#define AR9331_SW_PORT_STATUS_TX_FLOW_EN BIT(4)
+#define AR9331_SW_PORT_STATUS_RXMAC BIT(3)
+#define AR9331_SW_PORT_STATUS_TXMAC BIT(2)
+#define AR9331_SW_PORT_STATUS_SPEED_M GENMASK(1, 0)
+#define AR9331_SW_PORT_STATUS_SPEED_1000 2
+#define AR9331_SW_PORT_STATUS_SPEED_100 1
+#define AR9331_SW_PORT_STATUS_SPEED_10 0
+
+#define AR9331_SW_PORT_STATUS_MAC_MASK \
+ (AR9331_SW_PORT_STATUS_TXMAC | AR9331_SW_PORT_STATUS_RXMAC)
+
+#define AR9331_SW_PORT_STATUS_LINK_MASK \
+ (AR9331_SW_PORT_STATUS_DUPLEX_MODE | \
+ AR9331_SW_PORT_STATUS_RX_FLOW_EN | AR9331_SW_PORT_STATUS_TX_FLOW_EN | \
+ AR9331_SW_PORT_STATUS_SPEED_M)
+
+#define AR9331_SW_REG_PORT_CTRL(_port) (0x104 + (_port) * 0x100)
+#define AR9331_SW_PORT_CTRL_HEAD_EN BIT(11)
+#define AR9331_SW_PORT_CTRL_PORT_STATE GENMASK(2, 0)
+#define AR9331_SW_PORT_CTRL_PORT_STATE_DISABLED 0
+#define AR9331_SW_PORT_CTRL_PORT_STATE_BLOCKING 1
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LISTENING 2
+#define AR9331_SW_PORT_CTRL_PORT_STATE_LEARNING 3
+#define AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD 4
+
+#define AR9331_SW_REG_PORT_VLAN(_port) (0x108 + (_port) * 0x100)
+#define AR9331_SW_PORT_VLAN_8021Q_MODE GENMASK(31, 30)
+#define AR9331_SW_8021Q_MODE_SECURE 3
+#define AR9331_SW_8021Q_MODE_CHECK 2
+#define AR9331_SW_8021Q_MODE_FALLBACK 1
+#define AR9331_SW_8021Q_MODE_NONE 0
+#define AR9331_SW_PORT_VLAN_PORT_VID_MEMBER GENMASK(25, 16)
+
+/* MIB registers */
+#define AR9331_MIB_COUNTER(x) (0x20000 + ((x) * 0x100))
+
+/* Phy bypass mode
+ * ------------------------------------------------------------------------
+ * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |
+ *
+ * real | start | OP | PhyAddr | Reg Addr | TA |
+ * atheros| start | OP | 2'b00 |PhyAdd[2:0]| Reg Addr[4:0] | TA |
+ *
+ *
+ * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 |
+ * real | Data |
+ * atheros| Data |
+ *
+ * ------------------------------------------------------------------------
+ * Page address mode
+ * ------------------------------------------------------------------------
+ * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |
+ * real | start | OP | PhyAddr | Reg Addr | TA |
+ * atheros| start | OP | 2'b11 | 8'b0 | TA |
+ *
+ * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 |
+ * real | Data |
+ * atheros| | Page [9:0] |
+ */
+/* In case of Page Address mode, Bit[18:9] of 32 bit register address should be
+ * written to bits[9:0] of mdio data register.
+ */
+#define AR9331_SW_ADDR_PAGE GENMASK(18, 9)
+
+/* ------------------------------------------------------------------------
+ * Normal register access mode
+ * ------------------------------------------------------------------------
+ * Bit: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |10 |11 |12 |13 |14 |15 |
+ * real | start | OP | PhyAddr | Reg Addr | TA |
+ * atheros| start | OP | 2'b10 | low_addr[7:0] | TA |
+ *
+ * Bit: |16 |17 |18 |19 |20 |21 |22 |23 |24 |25 |26 |27 |28 |29 |30 |31 |
+ * real | Data |
+ * atheros| Data |
+ * ------------------------------------------------------------------------
+ */
+#define AR9331_SW_LOW_ADDR_PHY GENMASK(8, 6)
+#define AR9331_SW_LOW_ADDR_REG GENMASK(5, 1)
+
+#define AR9331_SW_MDIO_PHY_MODE_M GENMASK(4, 3)
+#define AR9331_SW_MDIO_PHY_MODE_PAGE 3
+#define AR9331_SW_MDIO_PHY_MODE_REG 2
+#define AR9331_SW_MDIO_PHY_MODE_BYPASS 0
+#define AR9331_SW_MDIO_PHY_ADDR_M GENMASK(2, 0)
+
+/* Empirical determined values */
+#define AR9331_SW_MDIO_POLL_SLEEP_US 1
+#define AR9331_SW_MDIO_POLL_TIMEOUT_US 20
+
+/* The interval should be small enough to avoid overflow of 32bit MIBs */
+/*
+ * FIXME: until we can read MIBs from stats64 call directly (i.e. sleep
+ * there), we have to poll stats more frequently then it is actually needed.
+ * For overflow protection, normally, 100 sec interval should have been OK.
+ */
+#define STATS_INTERVAL_JIFFIES (3 * HZ)
+
+struct ar9331_sw_stats_raw {
+ u32 rxbroad; /* 0x00 */
+ u32 rxpause; /* 0x04 */
+ u32 rxmulti; /* 0x08 */
+ u32 rxfcserr; /* 0x0c */
+ u32 rxalignerr; /* 0x10 */
+ u32 rxrunt; /* 0x14 */
+ u32 rxfragment; /* 0x18 */
+ u32 rx64byte; /* 0x1c */
+ u32 rx128byte; /* 0x20 */
+ u32 rx256byte; /* 0x24 */
+ u32 rx512byte; /* 0x28 */
+ u32 rx1024byte; /* 0x2c */
+ u32 rx1518byte; /* 0x30 */
+ u32 rxmaxbyte; /* 0x34 */
+ u32 rxtoolong; /* 0x38 */
+ u32 rxgoodbyte; /* 0x3c */
+ u32 rxgoodbyte_hi;
+ u32 rxbadbyte; /* 0x44 */
+ u32 rxbadbyte_hi;
+ u32 rxoverflow; /* 0x4c */
+ u32 filtered; /* 0x50 */
+ u32 txbroad; /* 0x54 */
+ u32 txpause; /* 0x58 */
+ u32 txmulti; /* 0x5c */
+ u32 txunderrun; /* 0x60 */
+ u32 tx64byte; /* 0x64 */
+ u32 tx128byte; /* 0x68 */
+ u32 tx256byte; /* 0x6c */
+ u32 tx512byte; /* 0x70 */
+ u32 tx1024byte; /* 0x74 */
+ u32 tx1518byte; /* 0x78 */
+ u32 txmaxbyte; /* 0x7c */
+ u32 txoversize; /* 0x80 */
+ u32 txbyte; /* 0x84 */
+ u32 txbyte_hi;
+ u32 txcollision; /* 0x8c */
+ u32 txabortcol; /* 0x90 */
+ u32 txmulticol; /* 0x94 */
+ u32 txsinglecol; /* 0x98 */
+ u32 txexcdefer; /* 0x9c */
+ u32 txdefer; /* 0xa0 */
+ u32 txlatecol; /* 0xa4 */
+};
+
+struct ar9331_sw_port {
+ int idx;
+ struct delayed_work mib_read;
+ struct rtnl_link_stats64 stats;
+ struct ethtool_pause_stats pause_stats;
+ struct spinlock stats_lock;
+};
+
+struct ar9331_sw_priv {
+ struct device *dev;
+ struct dsa_switch ds;
+ struct dsa_switch_ops ops;
+ struct irq_domain *irqdomain;
+ u32 irq_mask;
+ struct mutex lock_irq;
+ struct mii_bus *mbus; /* mdio master */
+ struct mii_bus *sbus; /* mdio slave */
+ struct regmap *regmap;
+ struct reset_control *sw_reset;
+ struct ar9331_sw_port port[AR9331_SW_PORTS];
+};
+
+static struct ar9331_sw_priv *ar9331_sw_port_to_priv(struct ar9331_sw_port *port)
+{
+ struct ar9331_sw_port *p = port - port->idx;
+
+ return (struct ar9331_sw_priv *)((void *)p -
+ offsetof(struct ar9331_sw_priv, port));
+}
+
+/* Warning: switch reset will reset last AR9331_SW_MDIO_PHY_MODE_PAGE request
+ * If some kind of optimization is used, the request should be repeated.
+ */
+static int ar9331_sw_reset(struct ar9331_sw_priv *priv)
+{
+ int ret;
+
+ ret = reset_control_assert(priv->sw_reset);
+ if (ret)
+ goto error;
+
+ /* AR9331 doc do not provide any information about proper reset
+ * sequence. The AR8136 (the closes switch to the AR9331) doc says:
+ * reset duration should be greater than 10ms. So, let's use this value
+ * for now.
+ */
+ usleep_range(10000, 15000);
+ ret = reset_control_deassert(priv->sw_reset);
+ if (ret)
+ goto error;
+ /* There is no information on how long should we wait after reset.
+ * AR8136 has an EEPROM and there is an Interrupt for EEPROM load
+ * status. AR9331 has no EEPROM support.
+ * For now, do not wait. In case AR8136 will be needed, the after
+ * reset delay can be added as well.
+ */
+
+ return 0;
+error:
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+ return ret;
+}
+
+static int ar9331_sw_mbus_write(struct mii_bus *mbus, int port, int regnum,
+ u16 data)
+{
+ struct ar9331_sw_priv *priv = mbus->priv;
+ struct regmap *regmap = priv->regmap;
+ u32 val;
+ int ret;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL,
+ AR9331_SW_MDIO_CTRL_BUSY |
+ AR9331_SW_MDIO_CTRL_MASTER_EN |
+ FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) |
+ FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum) |
+ FIELD_PREP(AR9331_SW_MDIO_CTRL_DATA_M, data));
+ if (ret)
+ goto error;
+
+ ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val,
+ !(val & AR9331_SW_MDIO_CTRL_BUSY),
+ AR9331_SW_MDIO_POLL_SLEEP_US,
+ AR9331_SW_MDIO_POLL_TIMEOUT_US);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err_ratelimited(priv->dev, "PHY write error: %i\n", ret);
+ return ret;
+}
+
+static int ar9331_sw_mbus_read(struct mii_bus *mbus, int port, int regnum)
+{
+ struct ar9331_sw_priv *priv = mbus->priv;
+ struct regmap *regmap = priv->regmap;
+ u32 val;
+ int ret;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_MDIO_CTRL,
+ AR9331_SW_MDIO_CTRL_BUSY |
+ AR9331_SW_MDIO_CTRL_MASTER_EN |
+ AR9331_SW_MDIO_CTRL_CMD_READ |
+ FIELD_PREP(AR9331_SW_MDIO_CTRL_PHY_ADDR_M, port) |
+ FIELD_PREP(AR9331_SW_MDIO_CTRL_REG_ADDR_M, regnum));
+ if (ret)
+ goto error;
+
+ ret = regmap_read_poll_timeout(regmap, AR9331_SW_REG_MDIO_CTRL, val,
+ !(val & AR9331_SW_MDIO_CTRL_BUSY),
+ AR9331_SW_MDIO_POLL_SLEEP_US,
+ AR9331_SW_MDIO_POLL_TIMEOUT_US);
+ if (ret)
+ goto error;
+
+ ret = regmap_read(regmap, AR9331_SW_REG_MDIO_CTRL, &val);
+ if (ret)
+ goto error;
+
+ return FIELD_GET(AR9331_SW_MDIO_CTRL_DATA_M, val);
+
+error:
+ dev_err_ratelimited(priv->dev, "PHY read error: %i\n", ret);
+ return ret;
+}
+
+static int ar9331_sw_mbus_init(struct ar9331_sw_priv *priv)
+{
+ struct device *dev = priv->dev;
+ struct mii_bus *mbus;
+ struct device_node *np, *mnp;
+ int ret;
+
+ np = dev->of_node;
+
+ mbus = devm_mdiobus_alloc(dev);
+ if (!mbus)
+ return -ENOMEM;
+
+ mbus->name = np->full_name;
+ snprintf(mbus->id, MII_BUS_ID_SIZE, "%pOF", np);
+
+ mbus->read = ar9331_sw_mbus_read;
+ mbus->write = ar9331_sw_mbus_write;
+ mbus->priv = priv;
+ mbus->parent = dev;
+
+ mnp = of_get_child_by_name(np, "mdio");
+ if (!mnp)
+ return -ENODEV;
+
+ ret = devm_of_mdiobus_register(dev, mbus, mnp);
+ of_node_put(mnp);
+ if (ret)
+ return ret;
+
+ priv->mbus = mbus;
+
+ return 0;
+}
+
+static int ar9331_sw_setup_port(struct dsa_switch *ds, int port)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ u32 port_mask, port_ctrl, val;
+ int ret;
+
+ /* Generate default port settings */
+ port_ctrl = FIELD_PREP(AR9331_SW_PORT_CTRL_PORT_STATE,
+ AR9331_SW_PORT_CTRL_PORT_STATE_FORWARD);
+
+ if (dsa_is_cpu_port(ds, port)) {
+ /* CPU port should be allowed to communicate with all user
+ * ports.
+ */
+ port_mask = dsa_user_ports(ds);
+ /* Enable Atheros header on CPU port. This will allow us
+ * communicate with each port separately
+ */
+ port_ctrl |= AR9331_SW_PORT_CTRL_HEAD_EN;
+ } else if (dsa_is_user_port(ds, port)) {
+ /* User ports should communicate only with the CPU port.
+ */
+ port_mask = BIT(dsa_upstream_port(ds, port));
+ } else {
+ /* Other ports do not need to communicate at all */
+ port_mask = 0;
+ }
+
+ val = FIELD_PREP(AR9331_SW_PORT_VLAN_8021Q_MODE,
+ AR9331_SW_8021Q_MODE_NONE) |
+ FIELD_PREP(AR9331_SW_PORT_VLAN_PORT_VID_MEMBER, port_mask);
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_VLAN(port), val);
+ if (ret)
+ goto error;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_CTRL(port), port_ctrl);
+ if (ret)
+ goto error;
+
+ return 0;
+error:
+ dev_err(priv->dev, "%s: error: %i\n", __func__, ret);
+
+ return ret;
+}
+
+static int ar9331_sw_setup(struct dsa_switch *ds)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret, i;
+
+ ret = ar9331_sw_reset(priv);
+ if (ret)
+ return ret;
+
+ /* Reset will set proper defaults. CPU - Port0 will be enabled and
+ * configured. All other ports (ports 1 - 5) are disabled
+ */
+ ret = ar9331_sw_mbus_init(priv);
+ if (ret)
+ return ret;
+
+ /* Do not drop broadcast frames */
+ ret = regmap_write_bits(regmap, AR9331_SW_REG_FLOOD_MASK,
+ AR9331_SW_FLOOD_MASK_BROAD_TO_CPU,
+ AR9331_SW_FLOOD_MASK_BROAD_TO_CPU);
+ if (ret)
+ goto error;
+
+ /* Set max frame size to the maximum supported value */
+ ret = regmap_write_bits(regmap, AR9331_SW_REG_GLOBAL_CTRL,
+ AR9331_SW_GLOBAL_CTRL_MFS_M,
+ AR9331_SW_GLOBAL_CTRL_MFS_M);
+ if (ret)
+ goto error;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ ret = ar9331_sw_setup_port(ds, i);
+ if (ret)
+ goto error;
+ }
+
+ ds->configure_vlan_while_not_filtering = false;
+
+ return 0;
+error:
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+ return ret;
+}
+
+static void ar9331_sw_port_disable(struct dsa_switch *ds, int port)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, AR9331_SW_REG_PORT_STATUS(port), 0);
+ if (ret)
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+}
+
+static enum dsa_tag_protocol ar9331_sw_get_tag_protocol(struct dsa_switch *ds,
+ int port,
+ enum dsa_tag_protocol m)
+{
+ return DSA_TAG_PROTO_AR9331;
+}
+
+static void ar9331_sw_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100;
+
+ switch (port) {
+ case 0:
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_1000;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+ }
+}
+
+static void ar9331_sw_phylink_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port),
+ AR9331_SW_PORT_STATUS_LINK_EN |
+ AR9331_SW_PORT_STATUS_FLOW_LINK_EN, 0);
+ if (ret)
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+}
+
+static void ar9331_sw_phylink_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct ar9331_sw_port *p = &priv->port[port];
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port),
+ AR9331_SW_PORT_STATUS_MAC_MASK, 0);
+ if (ret)
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+
+ cancel_delayed_work_sync(&p->mib_read);
+}
+
+static void ar9331_sw_phylink_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct ar9331_sw_port *p = &priv->port[port];
+ struct regmap *regmap = priv->regmap;
+ u32 val;
+ int ret;
+
+ schedule_delayed_work(&p->mib_read, 0);
+
+ val = AR9331_SW_PORT_STATUS_MAC_MASK;
+ switch (speed) {
+ case SPEED_1000:
+ val |= AR9331_SW_PORT_STATUS_SPEED_1000;
+ break;
+ case SPEED_100:
+ val |= AR9331_SW_PORT_STATUS_SPEED_100;
+ break;
+ case SPEED_10:
+ val |= AR9331_SW_PORT_STATUS_SPEED_10;
+ break;
+ default:
+ return;
+ }
+
+ if (duplex)
+ val |= AR9331_SW_PORT_STATUS_DUPLEX_MODE;
+
+ if (tx_pause)
+ val |= AR9331_SW_PORT_STATUS_TX_FLOW_EN;
+
+ if (rx_pause)
+ val |= AR9331_SW_PORT_STATUS_RX_FLOW_EN;
+
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_PORT_STATUS(port),
+ AR9331_SW_PORT_STATUS_MAC_MASK |
+ AR9331_SW_PORT_STATUS_LINK_MASK,
+ val);
+ if (ret)
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+}
+
+static void ar9331_read_stats(struct ar9331_sw_port *port)
+{
+ struct ar9331_sw_priv *priv = ar9331_sw_port_to_priv(port);
+ struct ethtool_pause_stats *pstats = &port->pause_stats;
+ struct rtnl_link_stats64 *stats = &port->stats;
+ struct ar9331_sw_stats_raw raw;
+ int ret;
+
+ /* Do the slowest part first, to avoid needless locking for long time */
+ ret = regmap_bulk_read(priv->regmap, AR9331_MIB_COUNTER(port->idx),
+ &raw, sizeof(raw) / sizeof(u32));
+ if (ret) {
+ dev_err_ratelimited(priv->dev, "%s: %i\n", __func__, ret);
+ return;
+ }
+ /* All MIB counters are cleared automatically on read */
+
+ spin_lock(&port->stats_lock);
+
+ stats->rx_bytes += raw.rxgoodbyte;
+ stats->tx_bytes += raw.txbyte;
+
+ stats->rx_packets += raw.rx64byte + raw.rx128byte + raw.rx256byte +
+ raw.rx512byte + raw.rx1024byte + raw.rx1518byte + raw.rxmaxbyte;
+ stats->tx_packets += raw.tx64byte + raw.tx128byte + raw.tx256byte +
+ raw.tx512byte + raw.tx1024byte + raw.tx1518byte + raw.txmaxbyte;
+
+ stats->rx_length_errors += raw.rxrunt + raw.rxfragment + raw.rxtoolong;
+ stats->rx_crc_errors += raw.rxfcserr;
+ stats->rx_frame_errors += raw.rxalignerr;
+ stats->rx_missed_errors += raw.rxoverflow;
+ stats->rx_dropped += raw.filtered;
+ stats->rx_errors += raw.rxfcserr + raw.rxalignerr + raw.rxrunt +
+ raw.rxfragment + raw.rxoverflow + raw.rxtoolong;
+
+ stats->tx_window_errors += raw.txlatecol;
+ stats->tx_fifo_errors += raw.txunderrun;
+ stats->tx_aborted_errors += raw.txabortcol;
+ stats->tx_errors += raw.txoversize + raw.txabortcol + raw.txunderrun +
+ raw.txlatecol;
+
+ stats->multicast += raw.rxmulti;
+ stats->collisions += raw.txcollision;
+
+ pstats->tx_pause_frames += raw.txpause;
+ pstats->rx_pause_frames += raw.rxpause;
+
+ spin_unlock(&port->stats_lock);
+}
+
+static void ar9331_do_stats_poll(struct work_struct *work)
+{
+ struct ar9331_sw_port *port = container_of(work, struct ar9331_sw_port,
+ mib_read.work);
+
+ ar9331_read_stats(port);
+
+ schedule_delayed_work(&port->mib_read, STATS_INTERVAL_JIFFIES);
+}
+
+static void ar9331_get_stats64(struct dsa_switch *ds, int port,
+ struct rtnl_link_stats64 *s)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct ar9331_sw_port *p = &priv->port[port];
+
+ spin_lock(&p->stats_lock);
+ memcpy(s, &p->stats, sizeof(*s));
+ spin_unlock(&p->stats_lock);
+}
+
+static void ar9331_get_pause_stats(struct dsa_switch *ds, int port,
+ struct ethtool_pause_stats *pause_stats)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+ struct ar9331_sw_port *p = &priv->port[port];
+
+ spin_lock(&p->stats_lock);
+ memcpy(pause_stats, &p->pause_stats, sizeof(*pause_stats));
+ spin_unlock(&p->stats_lock);
+}
+
+static const struct dsa_switch_ops ar9331_sw_ops = {
+ .get_tag_protocol = ar9331_sw_get_tag_protocol,
+ .setup = ar9331_sw_setup,
+ .port_disable = ar9331_sw_port_disable,
+ .phylink_get_caps = ar9331_sw_phylink_get_caps,
+ .phylink_mac_config = ar9331_sw_phylink_mac_config,
+ .phylink_mac_link_down = ar9331_sw_phylink_mac_link_down,
+ .phylink_mac_link_up = ar9331_sw_phylink_mac_link_up,
+ .get_stats64 = ar9331_get_stats64,
+ .get_pause_stats = ar9331_get_pause_stats,
+};
+
+static irqreturn_t ar9331_sw_irq(int irq, void *data)
+{
+ struct ar9331_sw_priv *priv = data;
+ struct regmap *regmap = priv->regmap;
+ u32 stat;
+ int ret;
+
+ ret = regmap_read(regmap, AR9331_SW_REG_GINT, &stat);
+ if (ret) {
+ dev_err(priv->dev, "can't read interrupt status\n");
+ return IRQ_NONE;
+ }
+
+ if (!stat)
+ return IRQ_NONE;
+
+ if (stat & AR9331_SW_GINT_PHY_INT) {
+ int child_irq;
+
+ child_irq = irq_find_mapping(priv->irqdomain, 0);
+ handle_nested_irq(child_irq);
+ }
+
+ ret = regmap_write(regmap, AR9331_SW_REG_GINT, stat);
+ if (ret) {
+ dev_err(priv->dev, "can't write interrupt status\n");
+ return IRQ_NONE;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void ar9331_sw_mask_irq(struct irq_data *d)
+{
+ struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d);
+
+ priv->irq_mask = 0;
+}
+
+static void ar9331_sw_unmask_irq(struct irq_data *d)
+{
+ struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d);
+
+ priv->irq_mask = AR9331_SW_GINT_PHY_INT;
+}
+
+static void ar9331_sw_irq_bus_lock(struct irq_data *d)
+{
+ struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d);
+
+ mutex_lock(&priv->lock_irq);
+}
+
+static void ar9331_sw_irq_bus_sync_unlock(struct irq_data *d)
+{
+ struct ar9331_sw_priv *priv = irq_data_get_irq_chip_data(d);
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_update_bits(regmap, AR9331_SW_REG_GINT_MASK,
+ AR9331_SW_GINT_PHY_INT, priv->irq_mask);
+ if (ret)
+ dev_err(priv->dev, "failed to change IRQ mask\n");
+
+ mutex_unlock(&priv->lock_irq);
+}
+
+static struct irq_chip ar9331_sw_irq_chip = {
+ .name = AR9331_SW_NAME,
+ .irq_mask = ar9331_sw_mask_irq,
+ .irq_unmask = ar9331_sw_unmask_irq,
+ .irq_bus_lock = ar9331_sw_irq_bus_lock,
+ .irq_bus_sync_unlock = ar9331_sw_irq_bus_sync_unlock,
+};
+
+static int ar9331_sw_irq_map(struct irq_domain *domain, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, domain->host_data);
+ irq_set_chip_and_handler(irq, &ar9331_sw_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, 1);
+ irq_set_noprobe(irq);
+
+ return 0;
+}
+
+static void ar9331_sw_irq_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_set_nested_thread(irq, 0);
+ irq_set_chip_and_handler(irq, NULL, NULL);
+ irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops ar9331_sw_irqdomain_ops = {
+ .map = ar9331_sw_irq_map,
+ .unmap = ar9331_sw_irq_unmap,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+static int ar9331_sw_irq_init(struct ar9331_sw_priv *priv)
+{
+ struct device_node *np = priv->dev->of_node;
+ struct device *dev = priv->dev;
+ int ret, irq;
+
+ irq = of_irq_get(np, 0);
+ if (irq <= 0) {
+ dev_err(dev, "failed to get parent IRQ\n");
+ return irq ? irq : -EINVAL;
+ }
+
+ mutex_init(&priv->lock_irq);
+ ret = devm_request_threaded_irq(dev, irq, NULL, ar9331_sw_irq,
+ IRQF_ONESHOT, AR9331_SW_NAME, priv);
+ if (ret) {
+ dev_err(dev, "unable to request irq: %d\n", ret);
+ return ret;
+ }
+
+ priv->irqdomain = irq_domain_add_linear(np, 1, &ar9331_sw_irqdomain_ops,
+ priv);
+ if (!priv->irqdomain) {
+ dev_err(dev, "failed to create IRQ domain\n");
+ return -EINVAL;
+ }
+
+ irq_set_parent(irq_create_mapping(priv->irqdomain, 0), irq);
+
+ return 0;
+}
+
+static int __ar9331_mdio_write(struct mii_bus *sbus, u8 mode, u16 reg, u16 val)
+{
+ u8 r, p;
+
+ p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, mode) |
+ FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg);
+ r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg);
+
+ return __mdiobus_write(sbus, p, r, val);
+}
+
+static int __ar9331_mdio_read(struct mii_bus *sbus, u16 reg)
+{
+ u8 r, p;
+
+ p = FIELD_PREP(AR9331_SW_MDIO_PHY_MODE_M, AR9331_SW_MDIO_PHY_MODE_REG) |
+ FIELD_GET(AR9331_SW_LOW_ADDR_PHY, reg);
+ r = FIELD_GET(AR9331_SW_LOW_ADDR_REG, reg);
+
+ return __mdiobus_read(sbus, p, r);
+}
+
+static int ar9331_mdio_read(void *ctx, const void *reg_buf, size_t reg_len,
+ void *val_buf, size_t val_len)
+{
+ struct ar9331_sw_priv *priv = ctx;
+ struct mii_bus *sbus = priv->sbus;
+ u32 reg = *(u32 *)reg_buf;
+ int ret;
+
+ if (reg == AR9331_SW_REG_PAGE) {
+ /* We cannot read the page selector register from hardware and
+ * we cache its value in regmap. Return all bits set here,
+ * that regmap will always write the page on first use.
+ */
+ *(u32 *)val_buf = GENMASK(9, 0);
+ return 0;
+ }
+
+ mutex_lock_nested(&sbus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = __ar9331_mdio_read(sbus, reg);
+ if (ret < 0)
+ goto error;
+
+ *(u32 *)val_buf = ret;
+ ret = __ar9331_mdio_read(sbus, reg + 2);
+ if (ret < 0)
+ goto error;
+
+ *(u32 *)val_buf |= ret << 16;
+
+ mutex_unlock(&sbus->mdio_lock);
+
+ return 0;
+error:
+ mutex_unlock(&sbus->mdio_lock);
+ dev_err_ratelimited(&sbus->dev, "Bus error. Failed to read register.\n");
+
+ return ret;
+}
+
+static int ar9331_mdio_write(void *ctx, u32 reg, u32 val)
+{
+ struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ctx;
+ struct mii_bus *sbus = priv->sbus;
+ int ret;
+
+ mutex_lock_nested(&sbus->mdio_lock, MDIO_MUTEX_NESTED);
+ if (reg == AR9331_SW_REG_PAGE) {
+ ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_PAGE,
+ 0, val);
+ if (ret < 0)
+ goto error;
+
+ mutex_unlock(&sbus->mdio_lock);
+
+ return 0;
+ }
+
+ /* In case of this switch we work with 32bit registers on top of 16bit
+ * bus. Some registers (for example access to forwarding database) have
+ * trigger bit on the first 16bit half of request, the result and
+ * configuration of request in the second half.
+ * To make it work properly, we should do the second part of transfer
+ * before the first one is done.
+ */
+ ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg + 2,
+ val >> 16);
+ if (ret < 0)
+ goto error;
+
+ ret = __ar9331_mdio_write(sbus, AR9331_SW_MDIO_PHY_MODE_REG, reg, val);
+ if (ret < 0)
+ goto error;
+
+ mutex_unlock(&sbus->mdio_lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&sbus->mdio_lock);
+ dev_err_ratelimited(&sbus->dev, "Bus error. Failed to write register.\n");
+
+ return ret;
+}
+
+static int ar9331_sw_bus_write(void *context, const void *data, size_t count)
+{
+ u32 reg = *(u32 *)data;
+ u32 val = *((u32 *)data + 1);
+
+ return ar9331_mdio_write(context, reg, val);
+}
+
+static const struct regmap_range ar9331_valid_regs[] = {
+ regmap_reg_range(0x0, 0x0),
+ regmap_reg_range(0x10, 0x14),
+ regmap_reg_range(0x20, 0x24),
+ regmap_reg_range(0x2c, 0x30),
+ regmap_reg_range(0x40, 0x44),
+ regmap_reg_range(0x50, 0x78),
+ regmap_reg_range(0x80, 0x98),
+
+ regmap_reg_range(0x100, 0x120),
+ regmap_reg_range(0x200, 0x220),
+ regmap_reg_range(0x300, 0x320),
+ regmap_reg_range(0x400, 0x420),
+ regmap_reg_range(0x500, 0x520),
+ regmap_reg_range(0x600, 0x620),
+
+ regmap_reg_range(0x20000, 0x200a4),
+ regmap_reg_range(0x20100, 0x201a4),
+ regmap_reg_range(0x20200, 0x202a4),
+ regmap_reg_range(0x20300, 0x203a4),
+ regmap_reg_range(0x20400, 0x204a4),
+ regmap_reg_range(0x20500, 0x205a4),
+
+ /* dummy page selector reg */
+ regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE),
+};
+
+static const struct regmap_range ar9331_nonvolatile_regs[] = {
+ regmap_reg_range(AR9331_SW_REG_PAGE, AR9331_SW_REG_PAGE),
+};
+
+static const struct regmap_range_cfg ar9331_regmap_range[] = {
+ {
+ .selector_reg = AR9331_SW_REG_PAGE,
+ .selector_mask = GENMASK(9, 0),
+ .selector_shift = 0,
+
+ .window_start = 0,
+ .window_len = 512,
+
+ .range_min = 0,
+ .range_max = AR9331_SW_REG_PAGE - 4,
+ },
+};
+
+static const struct regmap_access_table ar9331_register_set = {
+ .yes_ranges = ar9331_valid_regs,
+ .n_yes_ranges = ARRAY_SIZE(ar9331_valid_regs),
+};
+
+static const struct regmap_access_table ar9331_volatile_set = {
+ .no_ranges = ar9331_nonvolatile_regs,
+ .n_no_ranges = ARRAY_SIZE(ar9331_nonvolatile_regs),
+};
+
+static const struct regmap_config ar9331_mdio_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = AR9331_SW_REG_PAGE,
+
+ .ranges = ar9331_regmap_range,
+ .num_ranges = ARRAY_SIZE(ar9331_regmap_range),
+
+ .volatile_table = &ar9331_volatile_set,
+ .wr_table = &ar9331_register_set,
+ .rd_table = &ar9331_register_set,
+
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static struct regmap_bus ar9331_sw_bus = {
+ .reg_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .val_format_endian_default = REGMAP_ENDIAN_NATIVE,
+ .read = ar9331_mdio_read,
+ .write = ar9331_sw_bus_write,
+ .max_raw_read = 4,
+ .max_raw_write = 4,
+};
+
+static int ar9331_sw_probe(struct mdio_device *mdiodev)
+{
+ struct ar9331_sw_priv *priv;
+ struct dsa_switch *ds;
+ int ret, i;
+
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regmap = devm_regmap_init(&mdiodev->dev, &ar9331_sw_bus, priv,
+ &ar9331_mdio_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ dev_err(&mdiodev->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ priv->sw_reset = devm_reset_control_get(&mdiodev->dev, "switch");
+ if (IS_ERR(priv->sw_reset)) {
+ dev_err(&mdiodev->dev, "missing switch reset\n");
+ return PTR_ERR(priv->sw_reset);
+ }
+
+ priv->sbus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+
+ ret = ar9331_sw_irq_init(priv);
+ if (ret)
+ return ret;
+
+ ds = &priv->ds;
+ ds->dev = &mdiodev->dev;
+ ds->num_ports = AR9331_SW_PORTS;
+ ds->priv = priv;
+ priv->ops = ar9331_sw_ops;
+ ds->ops = &priv->ops;
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
+ struct ar9331_sw_port *port = &priv->port[i];
+
+ port->idx = i;
+ spin_lock_init(&port->stats_lock);
+ INIT_DELAYED_WORK(&port->mib_read, ar9331_do_stats_poll);
+ }
+
+ ret = dsa_register_switch(ds);
+ if (ret)
+ goto err_remove_irq;
+
+ return 0;
+
+err_remove_irq:
+ irq_domain_remove(priv->irqdomain);
+
+ return ret;
+}
+
+static void ar9331_sw_remove(struct mdio_device *mdiodev)
+{
+ struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ unsigned int i;
+
+ if (!priv)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
+ struct ar9331_sw_port *port = &priv->port[i];
+
+ cancel_delayed_work_sync(&port->mib_read);
+ }
+
+ irq_domain_remove(priv->irqdomain);
+ dsa_unregister_switch(&priv->ds);
+
+ reset_control_assert(priv->sw_reset);
+}
+
+static void ar9331_sw_shutdown(struct mdio_device *mdiodev)
+{
+ struct ar9331_sw_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(&priv->ds);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+static const struct of_device_id ar9331_sw_of_match[] = {
+ { .compatible = "qca,ar9331-switch" },
+ { },
+};
+
+static struct mdio_driver ar9331_sw_mdio_driver = {
+ .probe = ar9331_sw_probe,
+ .remove = ar9331_sw_remove,
+ .shutdown = ar9331_sw_shutdown,
+ .mdiodrv.driver = {
+ .name = AR9331_SW_NAME,
+ .of_match_table = ar9331_sw_of_match,
+ },
+};
+
+mdio_module_driver(ar9331_sw_mdio_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <kernel@pengutronix.de>");
+MODULE_DESCRIPTION("Driver for Atheros AR9331 switch");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
new file mode 100644
index 000000000..1e94ba103
--- /dev/null
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -0,0 +1,2090 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/bitfield.h>
+#include <linux/regmap.h>
+#include <net/dsa.h>
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/gpio/consumer.h>
+#include <linux/etherdevice.h>
+#include <linux/dsa/tag_qca.h>
+
+#include "qca8k.h"
+
+static void
+qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+ regaddr >>= 1;
+ *r1 = regaddr & 0x1e;
+
+ regaddr >>= 5;
+ *r2 = regaddr & 0x7;
+
+ regaddr >>= 3;
+ *page = regaddr & 0x3ff;
+}
+
+static int
+qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
+{
+ int ret;
+
+ ret = bus->read(bus, phy_id, regnum);
+ if (ret >= 0) {
+ *val = ret;
+ ret = bus->read(bus, phy_id, regnum + 1);
+ *val |= ret << 16;
+ }
+
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to read qca8k 32bit register\n");
+ *val = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static void
+qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
+{
+ u16 lo, hi;
+ int ret;
+
+ lo = val & 0xffff;
+ hi = (u16)(val >> 16);
+
+ ret = bus->write(bus, phy_id, regnum, lo);
+ if (ret >= 0)
+ ret = bus->write(bus, phy_id, regnum + 1, hi);
+ if (ret < 0)
+ dev_err_ratelimited(&bus->dev,
+ "failed to write qca8k 32bit register\n");
+}
+
+static int
+qca8k_set_page(struct qca8k_priv *priv, u16 page)
+{
+ u16 *cached_page = &priv->mdio_cache.page;
+ struct mii_bus *bus = priv->bus;
+ int ret;
+
+ if (page == *cached_page)
+ return 0;
+
+ ret = bus->write(bus, 0x18, 0, page);
+ if (ret < 0) {
+ dev_err_ratelimited(&bus->dev,
+ "failed to set qca8k page\n");
+ return ret;
+ }
+
+ *cached_page = page;
+ usleep_range(1000, 2000);
+ return 0;
+}
+
+static void qca8k_rw_reg_ack_handler(struct dsa_switch *ds, struct sk_buff *skb)
+{
+ struct qca8k_mgmt_eth_data *mgmt_eth_data;
+ struct qca8k_priv *priv = ds->priv;
+ struct qca_mgmt_ethhdr *mgmt_ethhdr;
+ u32 command;
+ u8 len, cmd;
+ int i;
+
+ mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb_mac_header(skb);
+ mgmt_eth_data = &priv->mgmt_eth_data;
+
+ command = get_unaligned_le32(&mgmt_ethhdr->command);
+ cmd = FIELD_GET(QCA_HDR_MGMT_CMD, command);
+
+ len = FIELD_GET(QCA_HDR_MGMT_LENGTH, command);
+ /* Special case for len of 15 as this is the max value for len and needs to
+ * be increased before converting it from word to dword.
+ */
+ if (len == 15)
+ len++;
+
+ /* We can ignore odd value, we always round up them in the alloc function. */
+ len *= sizeof(u16);
+
+ /* Make sure the seq match the requested packet */
+ if (get_unaligned_le32(&mgmt_ethhdr->seq) == mgmt_eth_data->seq)
+ mgmt_eth_data->ack = true;
+
+ if (cmd == MDIO_READ) {
+ u32 *val = mgmt_eth_data->data;
+
+ *val = get_unaligned_le32(&mgmt_ethhdr->mdio_data);
+
+ /* Get the rest of the 12 byte of data.
+ * The read/write function will extract the requested data.
+ */
+ if (len > QCA_HDR_MGMT_DATA1_LEN) {
+ __le32 *data2 = (__le32 *)skb->data;
+ int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN,
+ len - QCA_HDR_MGMT_DATA1_LEN);
+
+ val++;
+
+ for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) {
+ *val = get_unaligned_le32(data2);
+ val++;
+ data2++;
+ }
+ }
+ }
+
+ complete(&mgmt_eth_data->rw_done);
+}
+
+static struct sk_buff *qca8k_alloc_mdio_header(enum mdio_cmd cmd, u32 reg, u32 *val,
+ int priority, unsigned int len)
+{
+ struct qca_mgmt_ethhdr *mgmt_ethhdr;
+ unsigned int real_len;
+ struct sk_buff *skb;
+ __le32 *data2;
+ u32 command;
+ u16 hdr;
+ int i;
+
+ skb = dev_alloc_skb(QCA_HDR_MGMT_PKT_LEN);
+ if (!skb)
+ return NULL;
+
+ /* Hdr mgmt length value is in step of word size.
+ * As an example to process 4 byte of data the correct length to set is 2.
+ * To process 8 byte 4, 12 byte 6, 16 byte 8...
+ *
+ * Odd values will always return the next size on the ack packet.
+ * (length of 3 (6 byte) will always return 8 bytes of data)
+ *
+ * This means that a value of 15 (0xf) actually means reading/writing 32 bytes
+ * of data.
+ *
+ * To correctly calculate the length we devide the requested len by word and
+ * round up.
+ * On the ack function we can skip the odd check as we already handle the
+ * case here.
+ */
+ real_len = DIV_ROUND_UP(len, sizeof(u16));
+
+ /* We check if the result len is odd and we round up another time to
+ * the next size. (length of 3 will be increased to 4 as switch will always
+ * return 8 bytes)
+ */
+ if (real_len % sizeof(u16) != 0)
+ real_len++;
+
+ /* Max reg value is 0xf(15) but switch will always return the next size (32 byte) */
+ if (real_len == 16)
+ real_len--;
+
+ skb_reset_mac_header(skb);
+ skb_set_network_header(skb, skb->len);
+
+ mgmt_ethhdr = skb_push(skb, QCA_HDR_MGMT_HEADER_LEN + QCA_HDR_LEN);
+
+ hdr = FIELD_PREP(QCA_HDR_XMIT_VERSION, QCA_HDR_VERSION);
+ hdr |= FIELD_PREP(QCA_HDR_XMIT_PRIORITY, priority);
+ hdr |= QCA_HDR_XMIT_FROM_CPU;
+ hdr |= FIELD_PREP(QCA_HDR_XMIT_DP_BIT, BIT(0));
+ hdr |= FIELD_PREP(QCA_HDR_XMIT_CONTROL, QCA_HDR_XMIT_TYPE_RW_REG);
+
+ command = FIELD_PREP(QCA_HDR_MGMT_ADDR, reg);
+ command |= FIELD_PREP(QCA_HDR_MGMT_LENGTH, real_len);
+ command |= FIELD_PREP(QCA_HDR_MGMT_CMD, cmd);
+ command |= FIELD_PREP(QCA_HDR_MGMT_CHECK_CODE,
+ QCA_HDR_MGMT_CHECK_CODE_VAL);
+
+ put_unaligned_le32(command, &mgmt_ethhdr->command);
+
+ if (cmd == MDIO_WRITE)
+ put_unaligned_le32(*val, &mgmt_ethhdr->mdio_data);
+
+ mgmt_ethhdr->hdr = htons(hdr);
+
+ data2 = skb_put_zero(skb, QCA_HDR_MGMT_DATA2_LEN + QCA_HDR_MGMT_PADDING_LEN);
+ if (cmd == MDIO_WRITE && len > QCA_HDR_MGMT_DATA1_LEN) {
+ int data_len = min_t(int, QCA_HDR_MGMT_DATA2_LEN,
+ len - QCA_HDR_MGMT_DATA1_LEN);
+
+ val++;
+
+ for (i = sizeof(u32); i <= data_len; i += sizeof(u32)) {
+ put_unaligned_le32(*val, data2);
+ data2++;
+ val++;
+ }
+ }
+
+ return skb;
+}
+
+static void qca8k_mdio_header_fill_seq_num(struct sk_buff *skb, u32 seq_num)
+{
+ struct qca_mgmt_ethhdr *mgmt_ethhdr;
+ u32 seq;
+
+ seq = FIELD_PREP(QCA_HDR_MGMT_SEQ_NUM, seq_num);
+ mgmt_ethhdr = (struct qca_mgmt_ethhdr *)skb->data;
+ put_unaligned_le32(seq, &mgmt_ethhdr->seq);
+}
+
+static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+{
+ struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data;
+ struct sk_buff *skb;
+ bool ack;
+ int ret;
+
+ skb = qca8k_alloc_mdio_header(MDIO_READ, reg, NULL,
+ QCA8K_ETHERNET_MDIO_PRIORITY, len);
+ if (!skb)
+ return -ENOMEM;
+
+ mutex_lock(&mgmt_eth_data->mutex);
+
+ /* Check mgmt_master if is operational */
+ if (!priv->mgmt_master) {
+ kfree_skb(skb);
+ mutex_unlock(&mgmt_eth_data->mutex);
+ return -EINVAL;
+ }
+
+ skb->dev = priv->mgmt_master;
+
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the mdio pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(skb);
+
+ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT));
+
+ *val = mgmt_eth_data->data[0];
+ if (len > QCA_HDR_MGMT_DATA1_LEN)
+ memcpy(val + 1, mgmt_eth_data->data + 1, len - QCA_HDR_MGMT_DATA1_LEN);
+
+ ack = mgmt_eth_data->ack;
+
+ mutex_unlock(&mgmt_eth_data->mutex);
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ if (!ack)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+{
+ struct qca8k_mgmt_eth_data *mgmt_eth_data = &priv->mgmt_eth_data;
+ struct sk_buff *skb;
+ bool ack;
+ int ret;
+
+ skb = qca8k_alloc_mdio_header(MDIO_WRITE, reg, val,
+ QCA8K_ETHERNET_MDIO_PRIORITY, len);
+ if (!skb)
+ return -ENOMEM;
+
+ mutex_lock(&mgmt_eth_data->mutex);
+
+ /* Check mgmt_master if is operational */
+ if (!priv->mgmt_master) {
+ kfree_skb(skb);
+ mutex_unlock(&mgmt_eth_data->mutex);
+ return -EINVAL;
+ }
+
+ skb->dev = priv->mgmt_master;
+
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the mdio pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(skb);
+
+ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ msecs_to_jiffies(QCA8K_ETHERNET_TIMEOUT));
+
+ ack = mgmt_eth_data->ack;
+
+ mutex_unlock(&mgmt_eth_data->mutex);
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ if (!ack)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int
+qca8k_regmap_update_bits_eth(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
+{
+ u32 val = 0;
+ int ret;
+
+ ret = qca8k_read_eth(priv, reg, &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ val &= ~mask;
+ val |= write_val;
+
+ return qca8k_write_eth(priv, reg, &val, sizeof(val));
+}
+
+static int
+qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ if (!qca8k_read_eth(priv, reg, val, sizeof(*val)))
+ return 0;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(priv, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ int ret;
+
+ if (!qca8k_write_eth(priv, reg, &val, sizeof(val)))
+ return 0;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(priv, page);
+ if (ret < 0)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+ return ret;
+}
+
+static int
+qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (!qca8k_regmap_update_bits_eth(priv, reg, mask, write_val))
+ return 0;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(priv, page);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+ if (ret < 0)
+ goto exit;
+
+ val &= ~mask;
+ val |= write_val;
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+exit:
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static struct regmap_config qca8k_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = 0x16ac, /* end MIB - Port6 range */
+ .reg_read = qca8k_regmap_read,
+ .reg_write = qca8k_regmap_write,
+ .reg_update_bits = qca8k_regmap_update_bits,
+ .rd_table = &qca8k_readable_table,
+ .disable_locking = true, /* Locking is handled by qca8k read/write */
+ .cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
+};
+
+static int
+qca8k_phy_eth_busy_wait(struct qca8k_mgmt_eth_data *mgmt_eth_data,
+ struct sk_buff *read_skb, u32 *val)
+{
+ struct sk_buff *skb = skb_copy(read_skb, GFP_KERNEL);
+ bool ack;
+ int ret;
+
+ if (!skb)
+ return -ENOMEM;
+
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the copy pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(skb);
+
+ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ QCA8K_ETHERNET_TIMEOUT);
+
+ ack = mgmt_eth_data->ack;
+
+ if (ret <= 0)
+ return -ETIMEDOUT;
+
+ if (!ack)
+ return -EINVAL;
+
+ *val = mgmt_eth_data->data[0];
+
+ return 0;
+}
+
+static int
+qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
+ int regnum, u16 data)
+{
+ struct sk_buff *write_skb, *clear_skb, *read_skb;
+ struct qca8k_mgmt_eth_data *mgmt_eth_data;
+ u32 write_val, clear_val = 0, val;
+ struct net_device *mgmt_master;
+ int ret, ret1;
+ bool ack;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ mgmt_eth_data = &priv->mgmt_eth_data;
+
+ write_val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+ if (read) {
+ write_val |= QCA8K_MDIO_MASTER_READ;
+ } else {
+ write_val |= QCA8K_MDIO_MASTER_WRITE;
+ write_val |= QCA8K_MDIO_MASTER_DATA(data);
+ }
+
+ /* Prealloc all the needed skb before the lock */
+ write_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &write_val,
+ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(write_val));
+ if (!write_skb)
+ return -ENOMEM;
+
+ clear_skb = qca8k_alloc_mdio_header(MDIO_WRITE, QCA8K_MDIO_MASTER_CTRL, &clear_val,
+ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val));
+ if (!clear_skb) {
+ ret = -ENOMEM;
+ goto err_clear_skb;
+ }
+
+ read_skb = qca8k_alloc_mdio_header(MDIO_READ, QCA8K_MDIO_MASTER_CTRL, &clear_val,
+ QCA8K_ETHERNET_PHY_PRIORITY, sizeof(clear_val));
+ if (!read_skb) {
+ ret = -ENOMEM;
+ goto err_read_skb;
+ }
+
+ /* It seems that accessing the switch's internal PHYs via management
+ * packets still uses the MDIO bus within the switch internally, and
+ * these accesses can conflict with external MDIO accesses to other
+ * devices on the MDIO bus.
+ * We therefore need to lock the MDIO bus onto which the switch is
+ * connected.
+ */
+ mutex_lock(&priv->bus->mdio_lock);
+
+ /* Actually start the request:
+ * 1. Send mdio master packet
+ * 2. Busy Wait for mdio master command
+ * 3. Get the data if we are reading
+ * 4. Reset the mdio master (even with error)
+ */
+ mutex_lock(&mgmt_eth_data->mutex);
+
+ /* Check if mgmt_master is operational */
+ mgmt_master = priv->mgmt_master;
+ if (!mgmt_master) {
+ mutex_unlock(&mgmt_eth_data->mutex);
+ mutex_unlock(&priv->bus->mdio_lock);
+ ret = -EINVAL;
+ goto err_mgmt_master;
+ }
+
+ read_skb->dev = mgmt_master;
+ clear_skb->dev = mgmt_master;
+ write_skb->dev = mgmt_master;
+
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the write pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(write_skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(write_skb);
+
+ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ QCA8K_ETHERNET_TIMEOUT);
+
+ ack = mgmt_eth_data->ack;
+
+ if (ret <= 0) {
+ ret = -ETIMEDOUT;
+ kfree_skb(read_skb);
+ goto exit;
+ }
+
+ if (!ack) {
+ ret = -EINVAL;
+ kfree_skb(read_skb);
+ goto exit;
+ }
+
+ ret = read_poll_timeout(qca8k_phy_eth_busy_wait, ret1,
+ !(val & QCA8K_MDIO_MASTER_BUSY), 0,
+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ mgmt_eth_data, read_skb, &val);
+
+ if (ret < 0 && ret1 < 0) {
+ ret = ret1;
+ goto exit;
+ }
+
+ if (read) {
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the read pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(read_skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(read_skb);
+
+ ret = wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ QCA8K_ETHERNET_TIMEOUT);
+
+ ack = mgmt_eth_data->ack;
+
+ if (ret <= 0) {
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ if (!ack) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ ret = mgmt_eth_data->data[0] & QCA8K_MDIO_MASTER_DATA_MASK;
+ } else {
+ kfree_skb(read_skb);
+ }
+exit:
+ reinit_completion(&mgmt_eth_data->rw_done);
+
+ /* Increment seq_num and set it in the clear pkt */
+ mgmt_eth_data->seq++;
+ qca8k_mdio_header_fill_seq_num(clear_skb, mgmt_eth_data->seq);
+ mgmt_eth_data->ack = false;
+
+ dev_queue_xmit(clear_skb);
+
+ wait_for_completion_timeout(&mgmt_eth_data->rw_done,
+ QCA8K_ETHERNET_TIMEOUT);
+
+ mutex_unlock(&mgmt_eth_data->mutex);
+ mutex_unlock(&priv->bus->mdio_lock);
+
+ return ret;
+
+ /* Error handling before lock */
+err_mgmt_master:
+ kfree_skb(read_skb);
+err_read_skb:
+ kfree_skb(clear_skb);
+err_clear_skb:
+ kfree_skb(write_skb);
+
+ return ret;
+}
+
+static u32
+qca8k_port_to_phy(int port)
+{
+ /* From Andrew Lunn:
+ * Port 0 has no internal phy.
+ * Port 1 has an internal PHY at MDIO address 0.
+ * Port 2 has an internal PHY at MDIO address 1.
+ * ...
+ * Port 5 has an internal PHY at MDIO address 4.
+ * Port 6 has no internal PHY.
+ */
+
+ return port - 1;
+}
+
+static int
+qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
+{
+ u16 r1, r2, page;
+ u32 val;
+ int ret, ret1;
+
+ qca8k_split_addr(reg, &r1, &r2, &page);
+
+ ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
+ bus, 0x10 | r2, r1, &val);
+
+ /* Check if qca8k_read has failed for a different reason
+ * before returnting -ETIMEDOUT
+ */
+ if (ret < 0 && ret1 < 0)
+ return ret1;
+
+ return ret;
+}
+
+static int
+qca8k_mdio_write(struct qca8k_priv *priv, int phy, int regnum, u16 data)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
+ QCA8K_MDIO_MASTER_DATA(data);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(priv, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ return ret;
+}
+
+static int
+qca8k_mdio_read(struct qca8k_priv *priv, int phy, int regnum)
+{
+ struct mii_bus *bus = priv->bus;
+ u16 r1, r2, page;
+ u32 val;
+ int ret;
+
+ if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
+ return -EINVAL;
+
+ val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
+ QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
+ QCA8K_MDIO_MASTER_REG_ADDR(regnum);
+
+ qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
+
+ mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
+
+ ret = qca8k_set_page(priv, page);
+ if (ret)
+ goto exit;
+
+ qca8k_mii_write32(bus, 0x10 | r2, r1, val);
+
+ ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
+
+exit:
+ /* even if the busy_wait timeouts try to clear the MASTER_EN */
+ qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
+
+ mutex_unlock(&bus->mdio_lock);
+
+ if (ret >= 0)
+ ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
+
+ return ret;
+}
+
+static int
+qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ int ret;
+
+ /* Use mdio Ethernet when available, fallback to legacy one on error */
+ ret = qca8k_phy_eth_command(priv, false, phy, regnum, data);
+ if (!ret)
+ return 0;
+
+ return qca8k_mdio_write(priv, phy, regnum, data);
+}
+
+static int
+qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
+{
+ struct qca8k_priv *priv = slave_bus->priv;
+ int ret;
+
+ /* Use mdio Ethernet when available, fallback to legacy one on error */
+ ret = qca8k_phy_eth_command(priv, true, phy, regnum, 0);
+ if (ret >= 0)
+ return ret;
+
+ ret = qca8k_mdio_read(priv, phy, regnum);
+
+ if (ret < 0)
+ return 0xffff;
+
+ return ret;
+}
+
+static int
+qca8k_legacy_mdio_write(struct mii_bus *slave_bus, int port, int regnum, u16 data)
+{
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ return qca8k_internal_mdio_write(slave_bus, port, regnum, data);
+}
+
+static int
+qca8k_legacy_mdio_read(struct mii_bus *slave_bus, int port, int regnum)
+{
+ port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
+
+ return qca8k_internal_mdio_read(slave_bus, port, regnum);
+}
+
+static int
+qca8k_mdio_register(struct qca8k_priv *priv)
+{
+ struct dsa_switch *ds = priv->ds;
+ struct device_node *mdio;
+ struct mii_bus *bus;
+
+ bus = devm_mdiobus_alloc(ds->dev);
+ if (!bus)
+ return -ENOMEM;
+
+ bus->priv = (void *)priv;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d",
+ ds->dst->index, ds->index);
+ bus->parent = ds->dev;
+ bus->phy_mask = ~ds->phys_mii_mask;
+ ds->slave_mii_bus = bus;
+
+ /* Check if the devicetree declare the port:phy mapping */
+ mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
+ if (of_device_is_available(mdio)) {
+ bus->name = "qca8k slave mii";
+ bus->read = qca8k_internal_mdio_read;
+ bus->write = qca8k_internal_mdio_write;
+ return devm_of_mdiobus_register(priv->dev, bus, mdio);
+ }
+
+ /* If a mapping can't be found the legacy mapping is used,
+ * using the qca8k_port_to_phy function
+ */
+ bus->name = "qca8k-legacy slave mii";
+ bus->read = qca8k_legacy_mdio_read;
+ bus->write = qca8k_legacy_mdio_write;
+ return devm_mdiobus_register(priv->dev, bus);
+}
+
+static int
+qca8k_setup_mdio_bus(struct qca8k_priv *priv)
+{
+ u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
+ struct device_node *ports, *port;
+ phy_interface_t mode;
+ int err;
+
+ ports = of_get_child_by_name(priv->dev->of_node, "ports");
+ if (!ports)
+ ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
+
+ if (!ports)
+ return -EINVAL;
+
+ for_each_available_child_of_node(ports, port) {
+ err = of_property_read_u32(port, "reg", &reg);
+ if (err) {
+ of_node_put(port);
+ of_node_put(ports);
+ return err;
+ }
+
+ if (!dsa_is_user_port(priv->ds, reg))
+ continue;
+
+ of_get_phy_mode(port, &mode);
+
+ if (of_property_read_bool(port, "phy-handle") &&
+ mode != PHY_INTERFACE_MODE_INTERNAL)
+ external_mdio_mask |= BIT(reg);
+ else
+ internal_mdio_mask |= BIT(reg);
+ }
+
+ of_node_put(ports);
+ if (!external_mdio_mask && !internal_mdio_mask) {
+ dev_err(priv->dev, "no PHYs are defined.\n");
+ return -EINVAL;
+ }
+
+ /* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
+ * the MDIO_MASTER register also _disconnects_ the external MDC
+ * passthrough to the internal PHYs. It's not possible to use both
+ * configurations at the same time!
+ *
+ * Because this came up during the review process:
+ * If the external mdio-bus driver is capable magically disabling
+ * the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
+ * accessors for the time being, it would be possible to pull this
+ * off.
+ */
+ if (!!external_mdio_mask && !!internal_mdio_mask) {
+ dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
+ return -EINVAL;
+ }
+
+ if (external_mdio_mask) {
+ /* Make sure to disable the internal mdio bus in cases
+ * a dt-overlay and driver reload changed the configuration
+ */
+
+ return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL,
+ QCA8K_MDIO_MASTER_EN);
+ }
+
+ return qca8k_mdio_register(priv);
+}
+
+static int
+qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
+{
+ u32 mask = 0;
+ int ret = 0;
+
+ /* SoC specific settings for ipq8064.
+ * If more device require this consider adding
+ * a dedicated binding.
+ */
+ if (of_machine_is_compatible("qcom,ipq8064"))
+ mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
+
+ /* SoC specific settings for ipq8065 */
+ if (of_machine_is_compatible("qcom,ipq8065"))
+ mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
+
+ if (mask) {
+ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
+ QCA8K_MAC_PWR_RGMII0_1_8V |
+ QCA8K_MAC_PWR_RGMII1_1_8V,
+ mask);
+ }
+
+ return ret;
+}
+
+static int qca8k_find_cpu_port(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Find the connected cpu port. Valid port are 0 or 6 */
+ if (dsa_is_cpu_port(ds, 0))
+ return 0;
+
+ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
+
+ if (dsa_is_cpu_port(ds, 6))
+ return 6;
+
+ return -EINVAL;
+}
+
+static int
+qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
+{
+ const struct qca8k_match_data *data = priv->info;
+ struct device_node *node = priv->dev->of_node;
+ u32 val = 0;
+ int ret;
+
+ /* QCA8327 require to set to the correct mode.
+ * His bigger brother QCA8328 have the 172 pin layout.
+ * Should be applied by default but we set this just to make sure.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ /* Set the correct package of 148 pin for QCA8327 */
+ if (data->reduced_package)
+ val |= QCA8327_PWS_PACKAGE148_EN;
+
+ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
+ val);
+ if (ret)
+ return ret;
+ }
+
+ if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
+ val |= QCA8K_PWS_POWER_ON_SEL;
+
+ if (of_property_read_bool(node, "qca,led-open-drain")) {
+ if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
+ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
+ return -EINVAL;
+ }
+
+ val |= QCA8K_PWS_LED_OPEN_EN_CSR;
+ }
+
+ return qca8k_rmw(priv, QCA8K_REG_PWS,
+ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
+ val);
+}
+
+static int
+qca8k_parse_port_config(struct qca8k_priv *priv)
+{
+ int port, cpu_port_index = -1, ret;
+ struct device_node *port_dn;
+ phy_interface_t mode;
+ struct dsa_port *dp;
+ u32 delay;
+
+ /* We have 2 CPU port. Check them */
+ for (port = 0; port < QCA8K_NUM_PORTS; port++) {
+ /* Skip every other port */
+ if (port != 0 && port != 6)
+ continue;
+
+ dp = dsa_to_port(priv->ds, port);
+ port_dn = dp->dn;
+ cpu_port_index++;
+
+ if (!of_device_is_available(port_dn))
+ continue;
+
+ ret = of_get_phy_mode(port_dn, &mode);
+ if (ret)
+ continue;
+
+ switch (mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_SGMII:
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID)
+ delay = 1;
+
+ if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) {
+ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
+
+ delay = 0;
+
+ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
+ /* Switch regs accept value in ns, convert ps to ns */
+ delay = delay / 1000;
+ else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ delay = 2;
+
+ if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) {
+ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
+ delay = 3;
+ }
+
+ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
+
+ /* Skip sgmii parsing for rgmii* mode */
+ if (mode == PHY_INTERFACE_MODE_RGMII ||
+ mode == PHY_INTERFACE_MODE_RGMII_ID ||
+ mode == PHY_INTERFACE_MODE_RGMII_TXID ||
+ mode == PHY_INTERFACE_MODE_RGMII_RXID)
+ break;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
+ priv->ports_config.sgmii_tx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
+ priv->ports_config.sgmii_rx_clk_falling_edge = true;
+
+ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
+ priv->ports_config.sgmii_enable_pll = true;
+
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
+ priv->ports_config.sgmii_enable_pll = false;
+ }
+
+ if (priv->switch_revision < 2)
+ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
+ }
+
+ break;
+ default:
+ continue;
+ }
+ }
+
+ return 0;
+}
+
+static void
+qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
+ u32 reg)
+{
+ u32 delay, val = 0;
+ int ret;
+
+ /* Delay can be declared in 3 different way.
+ * Mode to rgmii and internal-delay standard binding defined
+ * rgmii-id or rgmii-tx/rx phy mode set.
+ * The parse logic set a delay different than 0 only when one
+ * of the 3 different way is used. In all other case delay is
+ * not enabled. With ID or TX/RXID delay is enabled and set
+ * to the default and recommended value.
+ */
+ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
+ }
+
+ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
+ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
+
+ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
+ }
+
+ /* Set RGMII delay based on the selected values */
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
+ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
+ val);
+ if (ret)
+ dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
+ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
+}
+
+static struct phylink_pcs *
+qca8k_phylink_mac_select_pcs(struct dsa_switch *ds, int port,
+ phy_interface_t interface)
+{
+ struct qca8k_priv *priv = ds->priv;
+ struct phylink_pcs *pcs = NULL;
+
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ switch (port) {
+ case 0:
+ pcs = &priv->pcs_port_0.pcs;
+ break;
+
+ case 6:
+ pcs = &priv->pcs_port_6.pcs;
+ break;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return pcs;
+}
+
+static void
+qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int cpu_port_index;
+ u32 reg;
+
+ switch (port) {
+ case 0: /* 1st CPU port */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII)
+ return;
+
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
+ break;
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY, nothing to do */
+ return;
+ case 6: /* 2nd CPU port / external PHY */
+ if (state->interface != PHY_INTERFACE_MODE_RGMII &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
+ state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
+ state->interface != PHY_INTERFACE_MODE_SGMII &&
+ state->interface != PHY_INTERFACE_MODE_1000BASEX)
+ return;
+
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
+ break;
+ default:
+ dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
+ return;
+ }
+
+ if (port != 6 && phylink_autoneg_inband(mode)) {
+ dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
+ __func__);
+ return;
+ }
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
+
+ /* Configure rgmii delay */
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+
+ /* QCA8337 requires to set rgmii rx delay for all ports.
+ * This is enabled through PORT5_PAD_CTRL for all ports,
+ * rather than individual port registers.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337)
+ qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
+ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ /* Enable SGMII on the port */
+ qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
+ break;
+ default:
+ dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
+ phy_modes(state->interface), port);
+ return;
+ }
+}
+
+static void qca8k_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ case 0: /* 1st CPU port */
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ config->supported_interfaces);
+ break;
+
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ /* Internal PHY */
+ __set_bit(PHY_INTERFACE_MODE_GMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+
+ case 6: /* 2nd CPU port / external PHY */
+ phy_interface_set_rgmii(config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ config->supported_interfaces);
+ break;
+ }
+
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_10 | MAC_100 | MAC_1000FD;
+
+ config->legacy_pre_march2020 = false;
+}
+
+static void
+qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+}
+
+static void
+qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
+ phy_interface_t interface, struct phy_device *phydev,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+
+ if (phylink_autoneg_inband(mode)) {
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ } else {
+ switch (speed) {
+ case SPEED_10:
+ reg = QCA8K_PORT_STATUS_SPEED_10;
+ break;
+ case SPEED_100:
+ reg = QCA8K_PORT_STATUS_SPEED_100;
+ break;
+ case SPEED_1000:
+ reg = QCA8K_PORT_STATUS_SPEED_1000;
+ break;
+ default:
+ reg = QCA8K_PORT_STATUS_LINK_AUTO;
+ break;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ reg |= QCA8K_PORT_STATUS_DUPLEX;
+
+ if (rx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_RXFLOW;
+
+ if (tx_pause || dsa_is_cpu_port(ds, port))
+ reg |= QCA8K_PORT_STATUS_TXFLOW;
+ }
+
+ reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
+}
+
+static struct qca8k_pcs *pcs_to_qca8k_pcs(struct phylink_pcs *pcs)
+{
+ return container_of(pcs, struct qca8k_pcs, pcs);
+}
+
+static void qca8k_pcs_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
+ int port = pcs_to_qca8k_pcs(pcs)->port;
+ u32 reg;
+ int ret;
+
+ ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), &reg);
+ if (ret < 0) {
+ state->link = false;
+ return;
+ }
+
+ state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
+ state->an_complete = state->link;
+ state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL :
+ DUPLEX_HALF;
+
+ switch (reg & QCA8K_PORT_STATUS_SPEED) {
+ case QCA8K_PORT_STATUS_SPEED_10:
+ state->speed = SPEED_10;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_100:
+ state->speed = SPEED_100;
+ break;
+ case QCA8K_PORT_STATUS_SPEED_1000:
+ state->speed = SPEED_1000;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ break;
+ }
+
+ if (reg & QCA8K_PORT_STATUS_RXFLOW)
+ state->pause |= MLO_PAUSE_RX;
+ if (reg & QCA8K_PORT_STATUS_TXFLOW)
+ state->pause |= MLO_PAUSE_TX;
+}
+
+static int qca8k_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct qca8k_priv *priv = pcs_to_qca8k_pcs(pcs)->priv;
+ int cpu_port_index, ret, port;
+ u32 reg, val;
+
+ port = pcs_to_qca8k_pcs(pcs)->port;
+ switch (port) {
+ case 0:
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT0;
+ break;
+
+ case 6:
+ reg = QCA8K_REG_PORT6_PAD_CTRL;
+ cpu_port_index = QCA8K_CPU_PORT6;
+ break;
+
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ /* Enable/disable SerDes auto-negotiation as necessary */
+ ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
+ if (ret)
+ return ret;
+ if (phylink_autoneg_inband(mode))
+ val &= ~QCA8K_PWS_SERDES_AEN_DIS;
+ else
+ val |= QCA8K_PWS_SERDES_AEN_DIS;
+ qca8k_write(priv, QCA8K_REG_PWS, val);
+
+ /* Configure the SGMII parameters */
+ ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
+ if (ret)
+ return ret;
+
+ val |= QCA8K_SGMII_EN_SD;
+
+ if (priv->ports_config.sgmii_enable_pll)
+ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
+ QCA8K_SGMII_EN_TX;
+
+ if (dsa_is_cpu_port(priv->ds, port)) {
+ /* CPU port, we're talking to the CPU MAC, be a PHY */
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_PHY;
+ } else if (interface == PHY_INTERFACE_MODE_SGMII) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_MAC;
+ } else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
+ val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
+ val |= QCA8K_SGMII_MODE_CTRL_BASEX;
+ }
+
+ qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
+
+ /* From original code is reported port instability as SGMII also
+ * require delay set. Apply advised values here or take them from DT.
+ */
+ if (interface == PHY_INTERFACE_MODE_SGMII)
+ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
+ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
+ * falling edge is set writing in the PORT0 PAD reg
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8327 ||
+ priv->switch_id == QCA8K_ID_QCA8337)
+ reg = QCA8K_REG_PORT0_PAD_CTRL;
+
+ val = 0;
+
+ /* SGMII Clock phase configuration */
+ if (priv->ports_config.sgmii_rx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
+
+ if (priv->ports_config.sgmii_tx_clk_falling_edge)
+ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
+
+ if (val)
+ ret = qca8k_rmw(priv, reg,
+ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
+ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
+ val);
+
+ return 0;
+}
+
+static void qca8k_pcs_an_restart(struct phylink_pcs *pcs)
+{
+}
+
+static const struct phylink_pcs_ops qca8k_pcs_ops = {
+ .pcs_get_state = qca8k_pcs_get_state,
+ .pcs_config = qca8k_pcs_config,
+ .pcs_an_restart = qca8k_pcs_an_restart,
+};
+
+static void qca8k_setup_pcs(struct qca8k_priv *priv, struct qca8k_pcs *qpcs,
+ int port)
+{
+ qpcs->pcs.ops = &qca8k_pcs_ops;
+
+ /* We don't have interrupts for link changes, so we need to poll */
+ qpcs->pcs.poll = true;
+ qpcs->priv = priv;
+ qpcs->port = port;
+}
+
+static void qca8k_mib_autocast_handler(struct dsa_switch *ds, struct sk_buff *skb)
+{
+ struct qca8k_mib_eth_data *mib_eth_data;
+ struct qca8k_priv *priv = ds->priv;
+ const struct qca8k_mib_desc *mib;
+ struct mib_ethhdr *mib_ethhdr;
+ __le32 *data2;
+ u8 port;
+ int i;
+
+ mib_ethhdr = (struct mib_ethhdr *)skb_mac_header(skb);
+ mib_eth_data = &priv->mib_eth_data;
+
+ /* The switch autocast every port. Ignore other packet and
+ * parse only the requested one.
+ */
+ port = FIELD_GET(QCA_HDR_RECV_SOURCE_PORT, ntohs(mib_ethhdr->hdr));
+ if (port != mib_eth_data->req_port)
+ goto exit;
+
+ data2 = (__le32 *)skb->data;
+
+ for (i = 0; i < priv->info->mib_count; i++) {
+ mib = &ar8327_mib[i];
+
+ /* First 3 mib are present in the skb head */
+ if (i < 3) {
+ mib_eth_data->data[i] = get_unaligned_le32(mib_ethhdr->data + i);
+ continue;
+ }
+
+ /* Some mib are 64 bit wide */
+ if (mib->size == 2)
+ mib_eth_data->data[i] = get_unaligned_le64((__le64 *)data2);
+ else
+ mib_eth_data->data[i] = get_unaligned_le32(data2);
+
+ data2 += mib->size;
+ }
+
+exit:
+ /* Complete on receiving all the mib packet */
+ if (refcount_dec_and_test(&mib_eth_data->port_parsed))
+ complete(&mib_eth_data->rw_done);
+}
+
+static int
+qca8k_get_ethtool_stats_eth(struct dsa_switch *ds, int port, u64 *data)
+{
+ struct dsa_port *dp = dsa_to_port(ds, port);
+ struct qca8k_mib_eth_data *mib_eth_data;
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ mib_eth_data = &priv->mib_eth_data;
+
+ mutex_lock(&mib_eth_data->mutex);
+
+ reinit_completion(&mib_eth_data->rw_done);
+
+ mib_eth_data->req_port = dp->index;
+ mib_eth_data->data = data;
+ refcount_set(&mib_eth_data->port_parsed, QCA8K_NUM_PORTS);
+
+ mutex_lock(&priv->reg_mutex);
+
+ /* Send mib autocast request */
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB,
+ QCA8K_MIB_FUNC | QCA8K_MIB_BUSY,
+ FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_CAST) |
+ QCA8K_MIB_BUSY);
+
+ mutex_unlock(&priv->reg_mutex);
+
+ if (ret)
+ goto exit;
+
+ ret = wait_for_completion_timeout(&mib_eth_data->rw_done, QCA8K_ETHERNET_TIMEOUT);
+
+exit:
+ mutex_unlock(&mib_eth_data->mutex);
+
+ return ret;
+}
+
+static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Communicate to the phy internal driver the switch revision.
+ * Based on the switch revision different values needs to be
+ * set to the dbg and mmd reg on the phy.
+ * The first 2 bit are used to communicate the switch revision
+ * to the phy driver.
+ */
+ if (port > 0 && port < 6)
+ return priv->switch_revision;
+
+ return 0;
+}
+
+static enum dsa_tag_protocol
+qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mp)
+{
+ return DSA_TAG_PROTO_QCA;
+}
+
+static void
+qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
+ bool operational)
+{
+ struct dsa_port *dp = master->dsa_ptr;
+ struct qca8k_priv *priv = ds->priv;
+
+ /* Ethernet MIB/MDIO is only supported for CPU port 0 */
+ if (dp->index != 0)
+ return;
+
+ mutex_lock(&priv->mgmt_eth_data.mutex);
+ mutex_lock(&priv->mib_eth_data.mutex);
+
+ priv->mgmt_master = operational ? (struct net_device *)master : NULL;
+
+ mutex_unlock(&priv->mib_eth_data.mutex);
+ mutex_unlock(&priv->mgmt_eth_data.mutex);
+}
+
+static int qca8k_connect_tag_protocol(struct dsa_switch *ds,
+ enum dsa_tag_protocol proto)
+{
+ struct qca_tagger_data *tagger_data;
+
+ switch (proto) {
+ case DSA_TAG_PROTO_QCA:
+ tagger_data = ds->tagger_data;
+
+ tagger_data->rw_reg_ack_handler = qca8k_rw_reg_ack_handler;
+ tagger_data->mib_autocast_handler = qca8k_mib_autocast_handler;
+
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int
+qca8k_setup(struct dsa_switch *ds)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ int cpu_port, ret, i;
+ u32 mask;
+
+ cpu_port = qca8k_find_cpu_port(ds);
+ if (cpu_port < 0) {
+ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
+ return cpu_port;
+ }
+
+ /* Parse CPU port config to be later used in phy_link mac_config */
+ ret = qca8k_parse_port_config(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_mdio_bus(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_of_pws_reg(priv);
+ if (ret)
+ return ret;
+
+ ret = qca8k_setup_mac_pwr_sel(priv);
+ if (ret)
+ return ret;
+
+ qca8k_setup_pcs(priv, &priv->pcs_port_0, 0);
+ qca8k_setup_pcs(priv, &priv->pcs_port_6, 6);
+
+ /* Make sure MAC06 is disabled */
+ ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
+ QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
+ if (ret) {
+ dev_err(priv->dev, "failed disabling MAC06 exchange");
+ return ret;
+ }
+
+ /* Enable CPU Port */
+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+ if (ret) {
+ dev_err(priv->dev, "failed enabling CPU port");
+ return ret;
+ }
+
+ /* Enable MIB counters */
+ ret = qca8k_mib_init(priv);
+ if (ret)
+ dev_warn(priv->dev, "mib init failed");
+
+ /* Initial setup of all ports */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* Disable forwarding by default on all ports */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, 0);
+ if (ret)
+ return ret;
+
+ /* Enable QCA header mode on all cpu ports */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
+ FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
+ if (ret) {
+ dev_err(priv->dev, "failed enabling QCA header mode");
+ return ret;
+ }
+ }
+
+ /* Disable MAC by default on all user ports */
+ if (dsa_is_user_port(ds, i))
+ qca8k_port_set_status(priv, i, 0);
+ }
+
+ /* Forward all unknown frames to CPU port for Linux processing
+ * Notice that in multi-cpu config only one port should be set
+ * for igmp, unknown, multicast and broadcast packet
+ */
+ ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
+ FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
+ if (ret)
+ return ret;
+
+ /* Setup connection between CPU port & user ports
+ * Configure specific switch configuration for ports
+ */
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ /* CPU port gets connected to all user ports of the switch */
+ if (dsa_is_cpu_port(ds, i)) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+ if (ret)
+ return ret;
+ }
+
+ /* Individual user ports get connected to CPU port only */
+ if (dsa_is_user_port(ds, i)) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_MEMBER,
+ BIT(cpu_port));
+ if (ret)
+ return ret;
+
+ /* Enable ARP Auto-learning by default */
+ ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
+ QCA8K_PORT_LOOKUP_LEARN);
+ if (ret)
+ return ret;
+
+ /* For port based vlans to work we need to set the
+ * default egress vid
+ */
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+ QCA8K_EGREES_VLAN_PORT_MASK(i),
+ QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+ QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+ QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+ if (ret)
+ return ret;
+ }
+
+ /* The port 5 of the qca8337 have some problem in flood condition. The
+ * original legacy driver had some specific buffer and priority settings
+ * for the different port suggested by the QCA switch team. Add this
+ * missing settings to improve switch stability under load condition.
+ * This problem is limited to qca8337 and other qca8k switch are not affected.
+ */
+ if (priv->switch_id == QCA8K_ID_QCA8337) {
+ switch (i) {
+ /* The 2 CPU port and port 5 requires some different
+ * priority than any other ports.
+ */
+ case 0:
+ case 5:
+ case 6:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+ break;
+ default:
+ mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+ QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+ QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+ }
+ qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
+
+ mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN;
+ qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
+ QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
+ QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+ QCA8K_PORT_HOL_CTRL1_WRED_EN,
+ mask);
+ }
+ }
+
+ /* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+ if (priv->switch_id == QCA8K_ID_QCA8327) {
+ mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
+ qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
+ QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
+ QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
+ mask);
+ }
+
+ /* Setup our port MTUs to match power on defaults */
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+ if (ret)
+ dev_warn(priv->dev, "failed setting MTU settings");
+
+ /* Flush the FDB table */
+ qca8k_fdb_flush(priv);
+
+ /* Set min a max ageing value supported */
+ ds->ageing_time_min = 7000;
+ ds->ageing_time_max = 458745000;
+
+ /* Set max number of LAGs supported */
+ ds->num_lag_ids = QCA8K_NUM_LAGS;
+
+ return 0;
+}
+
+static const struct dsa_switch_ops qca8k_switch_ops = {
+ .get_tag_protocol = qca8k_get_tag_protocol,
+ .setup = qca8k_setup,
+ .get_strings = qca8k_get_strings,
+ .get_ethtool_stats = qca8k_get_ethtool_stats,
+ .get_sset_count = qca8k_get_sset_count,
+ .set_ageing_time = qca8k_set_ageing_time,
+ .get_mac_eee = qca8k_get_mac_eee,
+ .set_mac_eee = qca8k_set_mac_eee,
+ .port_enable = qca8k_port_enable,
+ .port_disable = qca8k_port_disable,
+ .port_change_mtu = qca8k_port_change_mtu,
+ .port_max_mtu = qca8k_port_max_mtu,
+ .port_stp_state_set = qca8k_port_stp_state_set,
+ .port_bridge_join = qca8k_port_bridge_join,
+ .port_bridge_leave = qca8k_port_bridge_leave,
+ .port_fast_age = qca8k_port_fast_age,
+ .port_fdb_add = qca8k_port_fdb_add,
+ .port_fdb_del = qca8k_port_fdb_del,
+ .port_fdb_dump = qca8k_port_fdb_dump,
+ .port_mdb_add = qca8k_port_mdb_add,
+ .port_mdb_del = qca8k_port_mdb_del,
+ .port_mirror_add = qca8k_port_mirror_add,
+ .port_mirror_del = qca8k_port_mirror_del,
+ .port_vlan_filtering = qca8k_port_vlan_filtering,
+ .port_vlan_add = qca8k_port_vlan_add,
+ .port_vlan_del = qca8k_port_vlan_del,
+ .phylink_get_caps = qca8k_phylink_get_caps,
+ .phylink_mac_select_pcs = qca8k_phylink_mac_select_pcs,
+ .phylink_mac_config = qca8k_phylink_mac_config,
+ .phylink_mac_link_down = qca8k_phylink_mac_link_down,
+ .phylink_mac_link_up = qca8k_phylink_mac_link_up,
+ .get_phy_flags = qca8k_get_phy_flags,
+ .port_lag_join = qca8k_port_lag_join,
+ .port_lag_leave = qca8k_port_lag_leave,
+ .master_state_change = qca8k_master_change,
+ .connect_tag_protocol = qca8k_connect_tag_protocol,
+};
+
+static int
+qca8k_sw_probe(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv;
+ int ret;
+
+ /* allocate the private data struct so that we can probe the switches
+ * ID register
+ */
+ priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->bus = mdiodev->bus;
+ priv->dev = &mdiodev->dev;
+ priv->info = of_device_get_match_data(priv->dev);
+
+ priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
+ GPIOD_ASIS);
+ if (IS_ERR(priv->reset_gpio))
+ return PTR_ERR(priv->reset_gpio);
+
+ if (priv->reset_gpio) {
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ /* The active low duration must be greater than 10 ms
+ * and checkpatch.pl wants 20 ms.
+ */
+ msleep(20);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ }
+
+ /* Start by setting up the register mapping */
+ priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
+ &qca8k_regmap_config);
+ if (IS_ERR(priv->regmap)) {
+ dev_err(priv->dev, "regmap initialization failed");
+ return PTR_ERR(priv->regmap);
+ }
+
+ priv->mdio_cache.page = 0xffff;
+
+ /* Check the detected switch id */
+ ret = qca8k_read_switch_id(priv);
+ if (ret)
+ return ret;
+
+ priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
+ if (!priv->ds)
+ return -ENOMEM;
+
+ mutex_init(&priv->mgmt_eth_data.mutex);
+ init_completion(&priv->mgmt_eth_data.rw_done);
+
+ mutex_init(&priv->mib_eth_data.mutex);
+ init_completion(&priv->mib_eth_data.rw_done);
+
+ priv->ds->dev = &mdiodev->dev;
+ priv->ds->num_ports = QCA8K_NUM_PORTS;
+ priv->ds->priv = priv;
+ priv->ds->ops = &qca8k_switch_ops;
+ mutex_init(&priv->reg_mutex);
+ dev_set_drvdata(&mdiodev->dev, priv);
+
+ return dsa_register_switch(priv->ds);
+}
+
+static void
+qca8k_sw_remove(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+ int i;
+
+ if (!priv)
+ return;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++)
+ qca8k_port_set_status(priv, i, 0);
+
+ dsa_unregister_switch(priv->ds);
+}
+
+static void qca8k_sw_shutdown(struct mdio_device *mdiodev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+
+ dev_set_drvdata(&mdiodev->dev, NULL);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static void
+qca8k_set_pm(struct qca8k_priv *priv, int enable)
+{
+ int port;
+
+ for (port = 0; port < QCA8K_NUM_PORTS; port++) {
+ /* Do not enable on resume if the port was
+ * disabled before.
+ */
+ if (!(priv->port_enabled_map & BIT(port)))
+ continue;
+
+ qca8k_port_set_status(priv, port, enable);
+ }
+}
+
+static int qca8k_suspend(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 0);
+
+ return dsa_switch_suspend(priv->ds);
+}
+
+static int qca8k_resume(struct device *dev)
+{
+ struct qca8k_priv *priv = dev_get_drvdata(dev);
+
+ qca8k_set_pm(priv, 1);
+
+ return dsa_switch_resume(priv->ds);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
+ qca8k_suspend, qca8k_resume);
+
+static const struct qca8k_info_ops qca8xxx_ops = {
+ .autocast_mib = qca8k_get_ethtool_stats_eth,
+ .read_eth = qca8k_read_eth,
+ .write_eth = qca8k_write_eth,
+};
+
+static const struct qca8k_match_data qca8327 = {
+ .id = QCA8K_ID_QCA8327,
+ .reduced_package = true,
+ .mib_count = QCA8K_QCA832X_MIB_COUNT,
+ .ops = &qca8xxx_ops,
+};
+
+static const struct qca8k_match_data qca8328 = {
+ .id = QCA8K_ID_QCA8327,
+ .mib_count = QCA8K_QCA832X_MIB_COUNT,
+ .ops = &qca8xxx_ops,
+};
+
+static const struct qca8k_match_data qca833x = {
+ .id = QCA8K_ID_QCA8337,
+ .mib_count = QCA8K_QCA833X_MIB_COUNT,
+ .ops = &qca8xxx_ops,
+};
+
+static const struct of_device_id qca8k_of_match[] = {
+ { .compatible = "qca,qca8327", .data = &qca8327 },
+ { .compatible = "qca,qca8328", .data = &qca8328 },
+ { .compatible = "qca,qca8334", .data = &qca833x },
+ { .compatible = "qca,qca8337", .data = &qca833x },
+ { /* sentinel */ },
+};
+
+static struct mdio_driver qca8kmdio_driver = {
+ .probe = qca8k_sw_probe,
+ .remove = qca8k_sw_remove,
+ .shutdown = qca8k_sw_shutdown,
+ .mdiodrv.driver = {
+ .name = "qca8k",
+ .of_match_table = qca8k_of_match,
+ .pm = &qca8k_pm_ops,
+ },
+};
+
+mdio_module_driver(qca8kmdio_driver);
+
+MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
+MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qca8k");
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
new file mode 100644
index 000000000..7c3dd71a8
--- /dev/null
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -0,0 +1,1234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2016 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/netdevice.h>
+#include <net/dsa.h>
+#include <linux/if_bridge.h>
+
+#include "qca8k.h"
+
+#define MIB_DESC(_s, _o, _n) \
+ { \
+ .size = (_s), \
+ .offset = (_o), \
+ .name = (_n), \
+ }
+
+const struct qca8k_mib_desc ar8327_mib[] = {
+ MIB_DESC(1, 0x00, "RxBroad"),
+ MIB_DESC(1, 0x04, "RxPause"),
+ MIB_DESC(1, 0x08, "RxMulti"),
+ MIB_DESC(1, 0x0c, "RxFcsErr"),
+ MIB_DESC(1, 0x10, "RxAlignErr"),
+ MIB_DESC(1, 0x14, "RxRunt"),
+ MIB_DESC(1, 0x18, "RxFragment"),
+ MIB_DESC(1, 0x1c, "Rx64Byte"),
+ MIB_DESC(1, 0x20, "Rx128Byte"),
+ MIB_DESC(1, 0x24, "Rx256Byte"),
+ MIB_DESC(1, 0x28, "Rx512Byte"),
+ MIB_DESC(1, 0x2c, "Rx1024Byte"),
+ MIB_DESC(1, 0x30, "Rx1518Byte"),
+ MIB_DESC(1, 0x34, "RxMaxByte"),
+ MIB_DESC(1, 0x38, "RxTooLong"),
+ MIB_DESC(2, 0x3c, "RxGoodByte"),
+ MIB_DESC(2, 0x44, "RxBadByte"),
+ MIB_DESC(1, 0x4c, "RxOverFlow"),
+ MIB_DESC(1, 0x50, "Filtered"),
+ MIB_DESC(1, 0x54, "TxBroad"),
+ MIB_DESC(1, 0x58, "TxPause"),
+ MIB_DESC(1, 0x5c, "TxMulti"),
+ MIB_DESC(1, 0x60, "TxUnderRun"),
+ MIB_DESC(1, 0x64, "Tx64Byte"),
+ MIB_DESC(1, 0x68, "Tx128Byte"),
+ MIB_DESC(1, 0x6c, "Tx256Byte"),
+ MIB_DESC(1, 0x70, "Tx512Byte"),
+ MIB_DESC(1, 0x74, "Tx1024Byte"),
+ MIB_DESC(1, 0x78, "Tx1518Byte"),
+ MIB_DESC(1, 0x7c, "TxMaxByte"),
+ MIB_DESC(1, 0x80, "TxOverSize"),
+ MIB_DESC(2, 0x84, "TxByte"),
+ MIB_DESC(1, 0x8c, "TxCollision"),
+ MIB_DESC(1, 0x90, "TxAbortCol"),
+ MIB_DESC(1, 0x94, "TxMultiCol"),
+ MIB_DESC(1, 0x98, "TxSingleCol"),
+ MIB_DESC(1, 0x9c, "TxExcDefer"),
+ MIB_DESC(1, 0xa0, "TxDefer"),
+ MIB_DESC(1, 0xa4, "TxLateCol"),
+ MIB_DESC(1, 0xa8, "RXUnicast"),
+ MIB_DESC(1, 0xac, "TXUnicast"),
+};
+
+int qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
+{
+ return regmap_read(priv->regmap, reg, val);
+}
+
+int qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
+{
+ return regmap_write(priv->regmap, reg, val);
+}
+
+int qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
+{
+ return regmap_update_bits(priv->regmap, reg, mask, write_val);
+}
+
+static const struct regmap_range qca8k_readable_ranges[] = {
+ regmap_reg_range(0x0000, 0x00e4), /* Global control */
+ regmap_reg_range(0x0100, 0x0168), /* EEE control */
+ regmap_reg_range(0x0200, 0x0270), /* Parser control */
+ regmap_reg_range(0x0400, 0x0454), /* ACL */
+ regmap_reg_range(0x0600, 0x0718), /* Lookup */
+ regmap_reg_range(0x0800, 0x0b70), /* QM */
+ regmap_reg_range(0x0c00, 0x0c80), /* PKT */
+ regmap_reg_range(0x0e00, 0x0e98), /* L3 */
+ regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
+ regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
+ regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
+ regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
+ regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
+ regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
+ regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
+};
+
+const struct regmap_access_table qca8k_readable_table = {
+ .yes_ranges = qca8k_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
+};
+
+/* TODO: remove these extra ops when we can support regmap bulk read/write */
+static int qca8k_bulk_read(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+{
+ int i, count = len / sizeof(u32), ret;
+
+ if (priv->mgmt_master && priv->info->ops->read_eth &&
+ !priv->info->ops->read_eth(priv, reg, val, len))
+ return 0;
+
+ for (i = 0; i < count; i++) {
+ ret = regmap_read(priv->regmap, reg + (i * 4), val + i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/* TODO: remove these extra ops when we can support regmap bulk read/write */
+static int qca8k_bulk_write(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
+{
+ int i, count = len / sizeof(u32), ret;
+ u32 tmp;
+
+ if (priv->mgmt_master && priv->info->ops->write_eth &&
+ !priv->info->ops->write_eth(priv, reg, val, len))
+ return 0;
+
+ for (i = 0; i < count; i++) {
+ tmp = val[i];
+
+ ret = regmap_write(priv->regmap, reg + (i * 4), tmp);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
+{
+ u32 val;
+
+ return regmap_read_poll_timeout(priv->regmap, reg, val, !(val & mask), 0,
+ QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC);
+}
+
+static int qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
+{
+ u32 reg[3];
+ int ret;
+
+ /* load the ARL table into an array */
+ ret = qca8k_bulk_read(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
+ if (ret)
+ return ret;
+
+ /* vid - 83:72 */
+ fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]);
+ /* aging - 67:64 */
+ fdb->aging = FIELD_GET(QCA8K_ATU_STATUS_MASK, reg[2]);
+ /* portmask - 54:48 */
+ fdb->port_mask = FIELD_GET(QCA8K_ATU_PORT_MASK, reg[1]);
+ /* mac - 47:0 */
+ fdb->mac[0] = FIELD_GET(QCA8K_ATU_ADDR0_MASK, reg[1]);
+ fdb->mac[1] = FIELD_GET(QCA8K_ATU_ADDR1_MASK, reg[1]);
+ fdb->mac[2] = FIELD_GET(QCA8K_ATU_ADDR2_MASK, reg[0]);
+ fdb->mac[3] = FIELD_GET(QCA8K_ATU_ADDR3_MASK, reg[0]);
+ fdb->mac[4] = FIELD_GET(QCA8K_ATU_ADDR4_MASK, reg[0]);
+ fdb->mac[5] = FIELD_GET(QCA8K_ATU_ADDR5_MASK, reg[0]);
+
+ return 0;
+}
+
+static void qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask,
+ const u8 *mac, u8 aging)
+{
+ u32 reg[3] = { 0 };
+
+ /* vid - 83:72 */
+ reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid);
+ /* aging - 67:64 */
+ reg[2] |= FIELD_PREP(QCA8K_ATU_STATUS_MASK, aging);
+ /* portmask - 54:48 */
+ reg[1] = FIELD_PREP(QCA8K_ATU_PORT_MASK, port_mask);
+ /* mac - 47:0 */
+ reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR0_MASK, mac[0]);
+ reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR1_MASK, mac[1]);
+ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR2_MASK, mac[2]);
+ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR3_MASK, mac[3]);
+ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR4_MASK, mac[4]);
+ reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
+
+ /* load the array into the ARL table */
+ qca8k_bulk_write(priv, QCA8K_REG_ATU_DATA0, reg, sizeof(reg));
+}
+
+static int qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd,
+ int port)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and FDB index */
+ reg = QCA8K_ATU_FUNC_BUSY;
+ reg |= cmd;
+ if (port >= 0) {
+ reg |= QCA8K_ATU_FUNC_PORT_EN;
+ reg |= FIELD_PREP(QCA8K_ATU_FUNC_PORT_MASK, port);
+ }
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_FDB_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, &reg);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_ATU_FUNC_FULL)
+ return -1;
+ }
+
+ return 0;
+}
+
+static int qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb,
+ int port)
+{
+ int ret;
+
+ qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
+ if (ret < 0)
+ return ret;
+
+ return qca8k_fdb_read(priv, fdb);
+}
+
+static int qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac,
+ u16 port_mask, u16 vid, u8 aging)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac,
+ u16 port_mask, u16 vid)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_write(priv, vid, port_mask, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+void qca8k_fdb_flush(struct qca8k_priv *priv)
+{
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+static int qca8k_fdb_search_and_insert(struct qca8k_priv *priv, u8 port_mask,
+ const u8 *mac, u16 vid, u8 aging)
+{
+ struct qca8k_fdb fdb = { 0 };
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+
+ qca8k_fdb_write(priv, vid, 0, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_fdb_read(priv, &fdb);
+ if (ret < 0)
+ goto exit;
+
+ /* Rule exist. Delete first */
+ if (fdb.aging) {
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ if (ret)
+ goto exit;
+ } else {
+ fdb.aging = aging;
+ }
+
+ /* Add port to fdb portmask */
+ fdb.port_mask |= port_mask;
+
+ qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static int qca8k_fdb_search_and_del(struct qca8k_priv *priv, u8 port_mask,
+ const u8 *mac, u16 vid)
+{
+ struct qca8k_fdb fdb = { 0 };
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+
+ qca8k_fdb_write(priv, vid, 0, mac, 0);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
+ if (ret < 0)
+ goto exit;
+
+ ret = qca8k_fdb_read(priv, &fdb);
+ if (ret < 0)
+ goto exit;
+
+ /* Rule doesn't exist. Why delete? */
+ if (!fdb.aging) {
+ ret = -EINVAL;
+ goto exit;
+ }
+
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
+ if (ret)
+ goto exit;
+
+ /* Only port in the rule is this port. Don't re insert */
+ if (fdb.port_mask == port_mask)
+ goto exit;
+
+ /* Remove port from port mask */
+ fdb.port_mask &= ~port_mask;
+
+ qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
+ ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+static int qca8k_vlan_access(struct qca8k_priv *priv,
+ enum qca8k_vlan_cmd cmd, u16 vid)
+{
+ u32 reg;
+ int ret;
+
+ /* Set the command and VLAN index */
+ reg = QCA8K_VTU_FUNC1_BUSY;
+ reg |= cmd;
+ reg |= FIELD_PREP(QCA8K_VTU_FUNC1_VID_MASK, vid);
+
+ /* Write the function register triggering the table access */
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
+ if (ret)
+ return ret;
+
+ /* wait for completion */
+ ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY);
+ if (ret)
+ return ret;
+
+ /* Check for table full violation when adding an entry */
+ if (cmd == QCA8K_VLAN_LOAD) {
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, &reg);
+ if (ret < 0)
+ return ret;
+ if (reg & QCA8K_VTU_FUNC1_FULL)
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static int qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid,
+ bool untagged)
+{
+ u32 reg;
+ int ret;
+
+ /* We do the right thing with VLAN 0 and treat it as untagged while
+ * preserving the tag on egress.
+ */
+ if (vid == 0)
+ return 0;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
+ if (ret < 0)
+ goto out;
+ reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
+ reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
+ if (untagged)
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(port);
+ else
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(port);
+
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+static int qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
+{
+ u32 reg, mask;
+ int ret, i;
+ bool del;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
+ if (ret < 0)
+ goto out;
+
+ ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, &reg);
+ if (ret < 0)
+ goto out;
+ reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
+ reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(port);
+
+ /* Check if we're the last member to be removed */
+ del = true;
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i);
+
+ if ((reg & mask) != mask) {
+ del = false;
+ break;
+ }
+ }
+
+ if (del) {
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
+ } else {
+ ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
+ if (ret)
+ goto out;
+ ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
+ }
+
+out:
+ mutex_unlock(&priv->reg_mutex);
+
+ return ret;
+}
+
+int qca8k_mib_init(struct qca8k_priv *priv)
+{
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_MIB,
+ QCA8K_MIB_FUNC | QCA8K_MIB_BUSY,
+ FIELD_PREP(QCA8K_MIB_FUNC, QCA8K_MIB_FLUSH) |
+ QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
+ if (ret)
+ goto exit;
+
+ ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
+ if (ret)
+ goto exit;
+
+ ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+void qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
+{
+ u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
+
+ /* Port 0 and 6 have no internal PHY */
+ if (port > 0 && port < 6)
+ mask |= QCA8K_PORT_STATUS_LINK_AUTO;
+
+ if (enable)
+ regmap_set_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
+ else
+ regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
+}
+
+void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset,
+ uint8_t *data)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int i;
+
+ if (stringset != ETH_SS_STATS)
+ return;
+
+ for (i = 0; i < priv->info->mib_count; i++)
+ strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
+ ETH_GSTRING_LEN);
+}
+
+void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data)
+{
+ struct qca8k_priv *priv = ds->priv;
+ const struct qca8k_mib_desc *mib;
+ u32 reg, i, val;
+ u32 hi = 0;
+ int ret;
+
+ if (priv->mgmt_master && priv->info->ops->autocast_mib &&
+ priv->info->ops->autocast_mib(ds, port, data) > 0)
+ return;
+
+ for (i = 0; i < priv->info->mib_count; i++) {
+ mib = &ar8327_mib[i];
+ reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
+
+ ret = qca8k_read(priv, reg, &val);
+ if (ret < 0)
+ continue;
+
+ if (mib->size == 2) {
+ ret = qca8k_read(priv, reg + 4, &hi);
+ if (ret < 0)
+ continue;
+ }
+
+ data[i] = val;
+ if (mib->size == 2)
+ data[i] |= (u64)hi << 32;
+ }
+}
+
+int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ if (sset != ETH_SS_STATS)
+ return 0;
+
+ return priv->info->mib_count;
+}
+
+int qca8k_set_mac_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *eee)
+{
+ u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg;
+ int ret;
+
+ mutex_lock(&priv->reg_mutex);
+ ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, &reg);
+ if (ret < 0)
+ goto exit;
+
+ if (eee->eee_enabled)
+ reg |= lpi_en;
+ else
+ reg &= ~lpi_en;
+ ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
+
+exit:
+ mutex_unlock(&priv->reg_mutex);
+ return ret;
+}
+
+int qca8k_get_mac_eee(struct dsa_switch *ds, int port,
+ struct ethtool_eee *e)
+{
+ /* Nothing to do on the port's MAC */
+ return 0;
+}
+
+void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 stp_state;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
+ break;
+ case BR_STATE_BLOCKING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
+ break;
+ case BR_STATE_LISTENING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
+ break;
+ case BR_STATE_LEARNING:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ default:
+ stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
+ break;
+ }
+
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
+}
+
+int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int port_mask, cpu_port;
+ int i, ret;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+ port_mask = BIT(cpu_port);
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+ /* Add this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ ret = regmap_set_bits(priv->regmap,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ if (ret)
+ return ret;
+ if (i != port)
+ port_mask |= BIT(i);
+ }
+
+ /* Add all other ports to this ports portvlan mask */
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, port_mask);
+
+ return ret;
+}
+
+void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int cpu_port, i;
+
+ cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
+
+ for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+ if (dsa_is_cpu_port(ds, i))
+ continue;
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+ /* Remove this port to the portvlan mask of the other ports
+ * in the bridge
+ */
+ regmap_clear_bits(priv->regmap,
+ QCA8K_PORT_LOOKUP_CTRL(i),
+ BIT(port));
+ }
+
+ /* Set the cpu port to be the only one in the portvlan mask of
+ * this port
+ */
+ qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
+}
+
+void qca8k_port_fast_age(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ mutex_lock(&priv->reg_mutex);
+ qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port);
+ mutex_unlock(&priv->reg_mutex);
+}
+
+int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+ struct qca8k_priv *priv = ds->priv;
+ unsigned int secs = msecs / 1000;
+ u32 val;
+
+ /* AGE_TIME reg is set in 7s step */
+ val = secs / 7;
+
+ /* Handle case with 0 as val to NOT disable
+ * learning
+ */
+ if (!val)
+ val = 1;
+
+ return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL,
+ QCA8K_ATU_AGE_TIME_MASK,
+ QCA8K_ATU_AGE_TIME(val));
+}
+
+int qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ qca8k_port_set_status(priv, port, 1);
+ priv->port_enabled_map |= BIT(port);
+
+ if (dsa_is_user_port(ds, port))
+ phy_support_asym_pause(phy);
+
+ return 0;
+}
+
+void qca8k_port_disable(struct dsa_switch *ds, int port)
+{
+ struct qca8k_priv *priv = ds->priv;
+
+ qca8k_port_set_status(priv, port, 0);
+ priv->port_enabled_map &= ~BIT(port);
+}
+
+int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ /* We have only have a general MTU setting.
+ * DSA always set the CPU port's MTU to the largest MTU of the slave
+ * ports.
+ * Setting MTU just for the CPU port is sufficient to correctly set a
+ * value for every port.
+ */
+ if (!dsa_is_cpu_port(ds, port))
+ return 0;
+
+ /* To change the MAX_FRAME_SIZE the cpu ports must be off or
+ * the switch panics.
+ * Turn off both cpu ports before applying the new value to prevent
+ * this.
+ */
+ if (priv->port_enabled_map & BIT(0))
+ qca8k_port_set_status(priv, 0, 0);
+
+ if (priv->port_enabled_map & BIT(6))
+ qca8k_port_set_status(priv, 6, 0);
+
+ /* Include L2 header / FCS length */
+ ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, new_mtu +
+ ETH_HLEN + ETH_FCS_LEN);
+
+ if (priv->port_enabled_map & BIT(0))
+ qca8k_port_set_status(priv, 0, 1);
+
+ if (priv->port_enabled_map & BIT(6))
+ qca8k_port_set_status(priv, 6, 1);
+
+ return ret;
+}
+
+int qca8k_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return QCA8K_MAX_MTU;
+}
+
+int qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
+ u16 port_mask, u16 vid)
+{
+ /* Set the vid to the port vlan id if no vid is set */
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_add(priv, addr, port_mask, vid,
+ QCA8K_ATU_STATUS_STATIC);
+}
+
+int qca8k_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
+}
+
+int qca8k_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ u16 port_mask = BIT(port);
+
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_del(priv, addr, port_mask, vid);
+}
+
+int qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+ struct qca8k_fdb _fdb = { 0 };
+ int cnt = QCA8K_NUM_FDB_RECORDS;
+ bool is_static;
+ int ret = 0;
+
+ mutex_lock(&priv->reg_mutex);
+ while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
+ if (!_fdb.aging)
+ break;
+ is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
+ ret = cb(_fdb.mac, _fdb.vid, is_static, data);
+ if (ret)
+ break;
+ }
+ mutex_unlock(&priv->reg_mutex);
+
+ return 0;
+}
+
+int qca8k_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ struct qca8k_priv *priv = ds->priv;
+ const u8 *addr = mdb->addr;
+ u16 vid = mdb->vid;
+
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid,
+ QCA8K_ATU_STATUS_STATIC);
+}
+
+int qca8k_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ struct qca8k_priv *priv = ds->priv;
+ const u8 *addr = mdb->addr;
+ u16 vid = mdb->vid;
+
+ if (!vid)
+ vid = QCA8K_PORT_VID_DEF;
+
+ return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
+}
+
+int qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int monitor_port, ret;
+ u32 reg, val;
+
+ /* Check for existent entry */
+ if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
+ return -EEXIST;
+
+ ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ /* QCA83xx can have only one port set to mirror mode.
+ * Check that the correct port is requested and return error otherwise.
+ * When no mirror port is set, the values is set to 0xF
+ */
+ monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
+ return -EEXIST;
+
+ /* Set the monitor port */
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
+ mirror->to_local_port);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ return ret;
+
+ if (ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_update_bits(priv->regmap, reg, val, val);
+ if (ret)
+ return ret;
+
+ /* Track mirror port for tx and rx to decide when the
+ * mirror port has to be disabled.
+ */
+ if (ingress)
+ priv->mirror_rx |= BIT(port);
+ else
+ priv->mirror_tx |= BIT(port);
+
+ return 0;
+}
+
+void qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror)
+{
+ struct qca8k_priv *priv = ds->priv;
+ u32 reg, val;
+ int ret;
+
+ if (mirror->ingress) {
+ reg = QCA8K_PORT_LOOKUP_CTRL(port);
+ val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
+ } else {
+ reg = QCA8K_REG_PORT_HOL_CTRL1(port);
+ val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, reg, val);
+ if (ret)
+ goto err;
+
+ if (mirror->ingress)
+ priv->mirror_rx &= ~BIT(port);
+ else
+ priv->mirror_tx &= ~BIT(port);
+
+ /* No port set to send packet to mirror port. Disable mirror port */
+ if (!priv->mirror_rx && !priv->mirror_tx) {
+ val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+ QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
+ if (ret)
+ goto err;
+ }
+err:
+ dev_err(priv->dev, "Failed to del mirror port from %d", port);
+}
+
+int qca8k_port_vlan_filtering(struct dsa_switch *ds, int port,
+ bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ if (vlan_filtering) {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
+ } else {
+ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
+ QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
+ QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
+ }
+
+ return ret;
+}
+
+int qca8k_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+{
+ bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
+ bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ ret = qca8k_vlan_add(priv, port, vlan->vid, untagged);
+ if (ret) {
+ dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
+ return ret;
+ }
+
+ if (pvid) {
+ ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
+ QCA8K_EGREES_VLAN_PORT_MASK(port),
+ QCA8K_EGREES_VLAN_PORT(port, vlan->vid));
+ if (ret)
+ return ret;
+
+ ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
+ QCA8K_PORT_VLAN_CVID(vlan->vid) |
+ QCA8K_PORT_VLAN_SVID(vlan->vid));
+ }
+
+ return ret;
+}
+
+int qca8k_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret;
+
+ ret = qca8k_vlan_del(priv, port, vlan->vid);
+ if (ret)
+ dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret);
+
+ return ret;
+}
+
+static bool qca8k_lag_can_offload(struct dsa_switch *ds,
+ struct dsa_lag lag,
+ struct netdev_lag_upper_info *info,
+ struct netlink_ext_ack *extack)
+{
+ struct dsa_port *dp;
+ int members = 0;
+
+ if (!lag.id)
+ return false;
+
+ dsa_lag_foreach_port(dp, ds->dst, &lag)
+ /* Includes the port joining the LAG */
+ members++;
+
+ if (members > QCA8K_NUM_PORTS_FOR_LAG) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot offload more than 4 LAG ports");
+ return false;
+ }
+
+ if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Can only offload LAG using hash TX type");
+ return false;
+ }
+
+ if (info->hash_type != NETDEV_LAG_HASH_L2 &&
+ info->hash_type != NETDEV_LAG_HASH_L23) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Can only offload L2 or L2+L3 TX hash");
+ return false;
+ }
+
+ return true;
+}
+
+static int qca8k_lag_setup_hash(struct dsa_switch *ds,
+ struct dsa_lag lag,
+ struct netdev_lag_upper_info *info)
+{
+ struct net_device *lag_dev = lag.dev;
+ struct qca8k_priv *priv = ds->priv;
+ bool unique_lag = true;
+ unsigned int i;
+ u32 hash = 0;
+
+ switch (info->hash_type) {
+ case NETDEV_LAG_HASH_L23:
+ hash |= QCA8K_TRUNK_HASH_SIP_EN;
+ hash |= QCA8K_TRUNK_HASH_DIP_EN;
+ fallthrough;
+ case NETDEV_LAG_HASH_L2:
+ hash |= QCA8K_TRUNK_HASH_SA_EN;
+ hash |= QCA8K_TRUNK_HASH_DA_EN;
+ break;
+ default: /* We should NEVER reach this */
+ return -EOPNOTSUPP;
+ }
+
+ /* Check if we are the unique configured LAG */
+ dsa_lags_foreach_id(i, ds->dst)
+ if (i != lag.id && dsa_lag_by_id(ds->dst, i)) {
+ unique_lag = false;
+ break;
+ }
+
+ /* Hash Mode is global. Make sure the same Hash Mode
+ * is set to all the 4 possible lag.
+ * If we are the unique LAG we can set whatever hash
+ * mode we want.
+ * To change hash mode it's needed to remove all LAG
+ * and change the mode with the latest.
+ */
+ if (unique_lag) {
+ priv->lag_hash_mode = hash;
+ } else if (priv->lag_hash_mode != hash) {
+ netdev_err(lag_dev, "Error: Mismatched Hash Mode across different lag is not supported\n");
+ return -EOPNOTSUPP;
+ }
+
+ return regmap_update_bits(priv->regmap, QCA8K_TRUNK_HASH_EN_CTRL,
+ QCA8K_TRUNK_HASH_MASK, hash);
+}
+
+static int qca8k_lag_refresh_portmap(struct dsa_switch *ds, int port,
+ struct dsa_lag lag, bool delete)
+{
+ struct qca8k_priv *priv = ds->priv;
+ int ret, id, i;
+ u32 val;
+
+ /* DSA LAG IDs are one-based, hardware is zero-based */
+ id = lag.id - 1;
+
+ /* Read current port member */
+ ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0, &val);
+ if (ret)
+ return ret;
+
+ /* Shift val to the correct trunk */
+ val >>= QCA8K_REG_GOL_TRUNK_SHIFT(id);
+ val &= QCA8K_REG_GOL_TRUNK_MEMBER_MASK;
+ if (delete)
+ val &= ~BIT(port);
+ else
+ val |= BIT(port);
+
+ /* Update port member. With empty portmap disable trunk */
+ ret = regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0,
+ QCA8K_REG_GOL_TRUNK_MEMBER(id) |
+ QCA8K_REG_GOL_TRUNK_EN(id),
+ !val << QCA8K_REG_GOL_TRUNK_SHIFT(id) |
+ val << QCA8K_REG_GOL_TRUNK_SHIFT(id));
+
+ /* Search empty member if adding or port on deleting */
+ for (i = 0; i < QCA8K_NUM_PORTS_FOR_LAG; i++) {
+ ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id), &val);
+ if (ret)
+ return ret;
+
+ val >>= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i);
+ val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_MASK;
+
+ if (delete) {
+ /* If port flagged to be disabled assume this member is
+ * empty
+ */
+ if (val != QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
+ continue;
+
+ val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK;
+ if (val != port)
+ continue;
+ } else {
+ /* If port flagged to be enabled assume this member is
+ * already set
+ */
+ if (val == QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
+ continue;
+ }
+
+ /* We have found the member to add/remove */
+ break;
+ }
+
+ /* Set port in the correct port mask or disable port if in delete mode */
+ return regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id),
+ QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN(id, i) |
+ QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT(id, i),
+ !delete << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i) |
+ port << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i));
+}
+
+int qca8k_port_lag_join(struct dsa_switch *ds, int port, struct dsa_lag lag,
+ struct netdev_lag_upper_info *info,
+ struct netlink_ext_ack *extack)
+{
+ int ret;
+
+ if (!qca8k_lag_can_offload(ds, lag, info, extack))
+ return -EOPNOTSUPP;
+
+ ret = qca8k_lag_setup_hash(ds, lag, info);
+ if (ret)
+ return ret;
+
+ return qca8k_lag_refresh_portmap(ds, port, lag, false);
+}
+
+int qca8k_port_lag_leave(struct dsa_switch *ds, int port,
+ struct dsa_lag lag)
+{
+ return qca8k_lag_refresh_portmap(ds, port, lag, true);
+}
+
+int qca8k_read_switch_id(struct qca8k_priv *priv)
+{
+ u32 val;
+ u8 id;
+ int ret;
+
+ if (!priv->info)
+ return -ENODEV;
+
+ ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
+ if (ret < 0)
+ return -ENODEV;
+
+ id = QCA8K_MASK_CTRL_DEVICE_ID(val);
+ if (id != priv->info->id) {
+ dev_err(priv->dev,
+ "Switch id detected %x but expected %x",
+ id, priv->info->id);
+ return -ENODEV;
+ }
+
+ priv->switch_id = id;
+
+ /* Save revision to communicate to the internal PHY driver */
+ priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val);
+
+ return 0;
+}
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
new file mode 100644
index 000000000..03514f7a2
--- /dev/null
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -0,0 +1,515 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __QCA8K_H
+#define __QCA8K_H
+
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/gpio.h>
+#include <linux/dsa/tag_qca.h>
+
+#define QCA8K_ETHERNET_MDIO_PRIORITY 7
+#define QCA8K_ETHERNET_PHY_PRIORITY 6
+#define QCA8K_ETHERNET_TIMEOUT 5
+
+#define QCA8K_NUM_PORTS 7
+#define QCA8K_NUM_CPU_PORTS 2
+#define QCA8K_MAX_MTU 9000
+#define QCA8K_NUM_LAGS 4
+#define QCA8K_NUM_PORTS_FOR_LAG 4
+
+#define PHY_ID_QCA8327 0x004dd034
+#define QCA8K_ID_QCA8327 0x12
+#define PHY_ID_QCA8337 0x004dd036
+#define QCA8K_ID_QCA8337 0x13
+
+#define QCA8K_QCA832X_MIB_COUNT 39
+#define QCA8K_QCA833X_MIB_COUNT 41
+
+#define QCA8K_BUSY_WAIT_TIMEOUT 2000
+
+#define QCA8K_NUM_FDB_RECORDS 2048
+
+#define QCA8K_PORT_VID_DEF 1
+
+/* Global control registers */
+#define QCA8K_REG_MASK_CTRL 0x000
+#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0)
+#define QCA8K_MASK_CTRL_REV_ID(x) FIELD_GET(QCA8K_MASK_CTRL_REV_ID_MASK, x)
+#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8)
+#define QCA8K_MASK_CTRL_DEVICE_ID(x) FIELD_GET(QCA8K_MASK_CTRL_DEVICE_ID_MASK, x)
+#define QCA8K_REG_PORT0_PAD_CTRL 0x004
+#define QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN BIT(31)
+#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19)
+#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18)
+#define QCA8K_REG_PORT5_PAD_CTRL 0x008
+#define QCA8K_REG_PORT6_PAD_CTRL 0x00c
+#define QCA8K_PORT_PAD_RGMII_EN BIT(26)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) FIELD_PREP(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, x)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) FIELD_PREP(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, x)
+#define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25)
+#define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24)
+#define QCA8K_PORT_PAD_SGMII_EN BIT(7)
+#define QCA8K_REG_PWS 0x010
+#define QCA8K_PWS_POWER_ON_SEL BIT(31)
+/* This reg is only valid for QCA832x and toggle the package
+ * type from 176 pin (by default) to 148 pin used on QCA8327
+ */
+#define QCA8327_PWS_PACKAGE148_EN BIT(30)
+#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24)
+#define QCA8K_PWS_SERDES_AEN_DIS BIT(7)
+#define QCA8K_REG_MODULE_EN 0x030
+#define QCA8K_MODULE_EN_MIB BIT(0)
+#define QCA8K_REG_MIB 0x034
+#define QCA8K_MIB_FUNC GENMASK(26, 24)
+#define QCA8K_MIB_CPU_KEEP BIT(20)
+#define QCA8K_MIB_BUSY BIT(17)
+#define QCA8K_MDIO_MASTER_CTRL 0x3c
+#define QCA8K_MDIO_MASTER_BUSY BIT(31)
+#define QCA8K_MDIO_MASTER_EN BIT(30)
+#define QCA8K_MDIO_MASTER_READ BIT(27)
+#define QCA8K_MDIO_MASTER_WRITE 0
+#define QCA8K_MDIO_MASTER_SUP_PRE BIT(26)
+#define QCA8K_MDIO_MASTER_PHY_ADDR_MASK GENMASK(25, 21)
+#define QCA8K_MDIO_MASTER_PHY_ADDR(x) FIELD_PREP(QCA8K_MDIO_MASTER_PHY_ADDR_MASK, x)
+#define QCA8K_MDIO_MASTER_REG_ADDR_MASK GENMASK(20, 16)
+#define QCA8K_MDIO_MASTER_REG_ADDR(x) FIELD_PREP(QCA8K_MDIO_MASTER_REG_ADDR_MASK, x)
+#define QCA8K_MDIO_MASTER_DATA_MASK GENMASK(15, 0)
+#define QCA8K_MDIO_MASTER_DATA(x) FIELD_PREP(QCA8K_MDIO_MASTER_DATA_MASK, x)
+#define QCA8K_MDIO_MASTER_MAX_PORTS 5
+#define QCA8K_MDIO_MASTER_MAX_REG 32
+#define QCA8K_GOL_MAC_ADDR0 0x60
+#define QCA8K_GOL_MAC_ADDR1 0x64
+#define QCA8K_MAX_FRAME_SIZE 0x78
+#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4)
+#define QCA8K_PORT_STATUS_SPEED GENMASK(1, 0)
+#define QCA8K_PORT_STATUS_SPEED_10 0
+#define QCA8K_PORT_STATUS_SPEED_100 0x1
+#define QCA8K_PORT_STATUS_SPEED_1000 0x2
+#define QCA8K_PORT_STATUS_TXMAC BIT(2)
+#define QCA8K_PORT_STATUS_RXMAC BIT(3)
+#define QCA8K_PORT_STATUS_TXFLOW BIT(4)
+#define QCA8K_PORT_STATUS_RXFLOW BIT(5)
+#define QCA8K_PORT_STATUS_DUPLEX BIT(6)
+#define QCA8K_PORT_STATUS_LINK_UP BIT(8)
+#define QCA8K_PORT_STATUS_LINK_AUTO BIT(9)
+#define QCA8K_PORT_STATUS_LINK_PAUSE BIT(10)
+#define QCA8K_PORT_STATUS_FLOW_AUTO BIT(12)
+#define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4))
+#define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2)
+#define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0)
+#define QCA8K_PORT_HDR_CTRL_ALL 2
+#define QCA8K_PORT_HDR_CTRL_MGMT 1
+#define QCA8K_PORT_HDR_CTRL_NONE 0
+#define QCA8K_REG_SGMII_CTRL 0x0e0
+#define QCA8K_SGMII_EN_PLL BIT(1)
+#define QCA8K_SGMII_EN_RX BIT(2)
+#define QCA8K_SGMII_EN_TX BIT(3)
+#define QCA8K_SGMII_EN_SD BIT(4)
+#define QCA8K_SGMII_CLK125M_DELAY BIT(7)
+#define QCA8K_SGMII_MODE_CTRL_MASK GENMASK(23, 22)
+#define QCA8K_SGMII_MODE_CTRL(x) FIELD_PREP(QCA8K_SGMII_MODE_CTRL_MASK, x)
+#define QCA8K_SGMII_MODE_CTRL_BASEX QCA8K_SGMII_MODE_CTRL(0x0)
+#define QCA8K_SGMII_MODE_CTRL_PHY QCA8K_SGMII_MODE_CTRL(0x1)
+#define QCA8K_SGMII_MODE_CTRL_MAC QCA8K_SGMII_MODE_CTRL(0x2)
+
+/* MAC_PWR_SEL registers */
+#define QCA8K_REG_MAC_PWR_SEL 0x0e4
+#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18)
+#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19)
+
+/* EEE control registers */
+#define QCA8K_REG_EEE_CTRL 0x100
+#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2)
+
+/* TRUNK_HASH_EN registers */
+#define QCA8K_TRUNK_HASH_EN_CTRL 0x270
+#define QCA8K_TRUNK_HASH_SIP_EN BIT(3)
+#define QCA8K_TRUNK_HASH_DIP_EN BIT(2)
+#define QCA8K_TRUNK_HASH_SA_EN BIT(1)
+#define QCA8K_TRUNK_HASH_DA_EN BIT(0)
+#define QCA8K_TRUNK_HASH_MASK GENMASK(3, 0)
+
+/* ACL registers */
+#define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8))
+#define QCA8K_PORT_VLAN_CVID_MASK GENMASK(27, 16)
+#define QCA8K_PORT_VLAN_CVID(x) FIELD_PREP(QCA8K_PORT_VLAN_CVID_MASK, x)
+#define QCA8K_PORT_VLAN_SVID_MASK GENMASK(11, 0)
+#define QCA8K_PORT_VLAN_SVID(x) FIELD_PREP(QCA8K_PORT_VLAN_SVID_MASK, x)
+#define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8))
+#define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470
+#define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474
+
+/* Lookup registers */
+#define QCA8K_REG_ATU_DATA0 0x600
+#define QCA8K_ATU_ADDR2_MASK GENMASK(31, 24)
+#define QCA8K_ATU_ADDR3_MASK GENMASK(23, 16)
+#define QCA8K_ATU_ADDR4_MASK GENMASK(15, 8)
+#define QCA8K_ATU_ADDR5_MASK GENMASK(7, 0)
+#define QCA8K_REG_ATU_DATA1 0x604
+#define QCA8K_ATU_PORT_MASK GENMASK(22, 16)
+#define QCA8K_ATU_ADDR0_MASK GENMASK(15, 8)
+#define QCA8K_ATU_ADDR1_MASK GENMASK(7, 0)
+#define QCA8K_REG_ATU_DATA2 0x608
+#define QCA8K_ATU_VID_MASK GENMASK(19, 8)
+#define QCA8K_ATU_STATUS_MASK GENMASK(3, 0)
+#define QCA8K_ATU_STATUS_STATIC 0xf
+#define QCA8K_REG_ATU_FUNC 0x60c
+#define QCA8K_ATU_FUNC_BUSY BIT(31)
+#define QCA8K_ATU_FUNC_PORT_EN BIT(14)
+#define QCA8K_ATU_FUNC_MULTI_EN BIT(13)
+#define QCA8K_ATU_FUNC_FULL BIT(12)
+#define QCA8K_ATU_FUNC_PORT_MASK GENMASK(11, 8)
+#define QCA8K_REG_VTU_FUNC0 0x610
+#define QCA8K_VTU_FUNC0_VALID BIT(20)
+#define QCA8K_VTU_FUNC0_IVL_EN BIT(19)
+/* QCA8K_VTU_FUNC0_EG_MODE_MASK GENMASK(17, 4)
+ * It does contain VLAN_MODE for each port [5:4] for port0,
+ * [7:6] for port1 ... [17:16] for port6. Use virtual port
+ * define to handle this.
+ */
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i) (4 + (_i) * 2)
+#define QCA8K_VTU_FUNC0_EG_MODE_MASK GENMASK(1, 0)
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(_i) (GENMASK(1, 0) << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
+#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x0)
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_UNMOD(_i) (QCA8K_VTU_FUNC0_EG_MODE_UNMOD << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
+#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x1)
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(_i) (QCA8K_VTU_FUNC0_EG_MODE_UNTAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
+#define QCA8K_VTU_FUNC0_EG_MODE_TAG FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x2)
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(_i) (QCA8K_VTU_FUNC0_EG_MODE_TAG << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
+#define QCA8K_VTU_FUNC0_EG_MODE_NOT FIELD_PREP(QCA8K_VTU_FUNC0_EG_MODE_MASK, 0x3)
+#define QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(_i) (QCA8K_VTU_FUNC0_EG_MODE_NOT << QCA8K_VTU_FUNC0_EG_MODE_PORT_SHIFT(_i))
+#define QCA8K_REG_VTU_FUNC1 0x614
+#define QCA8K_VTU_FUNC1_BUSY BIT(31)
+#define QCA8K_VTU_FUNC1_VID_MASK GENMASK(27, 16)
+#define QCA8K_VTU_FUNC1_FULL BIT(4)
+#define QCA8K_REG_ATU_CTRL 0x618
+#define QCA8K_ATU_AGE_TIME_MASK GENMASK(15, 0)
+#define QCA8K_ATU_AGE_TIME(x) FIELD_PREP(QCA8K_ATU_AGE_TIME_MASK, (x))
+#define QCA8K_REG_GLOBAL_FW_CTRL0 0x620
+#define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10)
+#define QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM GENMASK(7, 4)
+#define QCA8K_REG_GLOBAL_FW_CTRL1 0x624
+#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK GENMASK(30, 24)
+#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK GENMASK(22, 16)
+#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK GENMASK(14, 8)
+#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK GENMASK(6, 0)
+#define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc)
+#define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_MASK GENMASK(9, 8)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE(x) FIELD_PREP(QCA8K_PORT_LOOKUP_VLAN_MODE_MASK, x)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE QCA8K_PORT_LOOKUP_VLAN_MODE(0x0)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK QCA8K_PORT_LOOKUP_VLAN_MODE(0x1)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK QCA8K_PORT_LOOKUP_VLAN_MODE(0x2)
+#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE QCA8K_PORT_LOOKUP_VLAN_MODE(0x3)
+#define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16)
+#define QCA8K_PORT_LOOKUP_STATE(x) FIELD_PREP(QCA8K_PORT_LOOKUP_STATE_MASK, x)
+#define QCA8K_PORT_LOOKUP_STATE_DISABLED QCA8K_PORT_LOOKUP_STATE(0x0)
+#define QCA8K_PORT_LOOKUP_STATE_BLOCKING QCA8K_PORT_LOOKUP_STATE(0x1)
+#define QCA8K_PORT_LOOKUP_STATE_LISTENING QCA8K_PORT_LOOKUP_STATE(0x2)
+#define QCA8K_PORT_LOOKUP_STATE_LEARNING QCA8K_PORT_LOOKUP_STATE(0x3)
+#define QCA8K_PORT_LOOKUP_STATE_FORWARD QCA8K_PORT_LOOKUP_STATE(0x4)
+#define QCA8K_PORT_LOOKUP_LEARN BIT(20)
+#define QCA8K_PORT_LOOKUP_ING_MIRROR_EN BIT(25)
+
+#define QCA8K_REG_GOL_TRUNK_CTRL0 0x700
+/* 4 max trunk first
+ * first 6 bit for member bitmap
+ * 7th bit is to enable trunk port
+ */
+#define QCA8K_REG_GOL_TRUNK_SHIFT(_i) ((_i) * 8)
+#define QCA8K_REG_GOL_TRUNK_EN_MASK BIT(7)
+#define QCA8K_REG_GOL_TRUNK_EN(_i) (QCA8K_REG_GOL_TRUNK_EN_MASK << QCA8K_REG_GOL_TRUNK_SHIFT(_i))
+#define QCA8K_REG_GOL_TRUNK_MEMBER_MASK GENMASK(6, 0)
+#define QCA8K_REG_GOL_TRUNK_MEMBER(_i) (QCA8K_REG_GOL_TRUNK_MEMBER_MASK << QCA8K_REG_GOL_TRUNK_SHIFT(_i))
+/* 0x704 for TRUNK 0-1 --- 0x708 for TRUNK 2-3 */
+#define QCA8K_REG_GOL_TRUNK_CTRL(_i) (0x704 + (((_i) / 2) * 4))
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_MASK GENMASK(3, 0)
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK BIT(3)
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK GENMASK(2, 0)
+#define QCA8K_REG_GOL_TRUNK_ID_SHIFT(_i) (((_i) / 2) * 16)
+#define QCA8K_REG_GOL_MEM_ID_SHIFT(_i) ((_i) * 4)
+/* Complex shift: FIRST shift for port THEN shift for trunk */
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j) (QCA8K_REG_GOL_MEM_ID_SHIFT(_j) + QCA8K_REG_GOL_TRUNK_ID_SHIFT(_i))
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN(_i, _j) (QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j))
+#define QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT(_i, _j) (QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(_i, _j))
+
+#define QCA8K_REG_GLOBAL_FC_THRESH 0x800
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK GENMASK(24, 16)
+#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK, x)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK GENMASK(8, 0)
+#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) FIELD_PREP(QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK, x)
+
+#define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK GENMASK(7, 4)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK GENMASK(11, 8)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK GENMASK(15, 12)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK GENMASK(19, 16)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK GENMASK(23, 20)
+#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK GENMASK(29, 24)
+#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF_MASK, x)
+
+#define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8)
+#define QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK GENMASK(3, 0)
+#define QCA8K_PORT_HOL_CTRL1_ING(x) FIELD_PREP(QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK, x)
+#define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6)
+#define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7)
+#define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8)
+#define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16)
+
+/* Pkt edit registers */
+#define QCA8K_EGREES_VLAN_PORT_SHIFT(_i) (16 * ((_i) % 2))
+#define QCA8K_EGREES_VLAN_PORT_MASK(_i) (GENMASK(11, 0) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i))
+#define QCA8K_EGREES_VLAN_PORT(_i, x) ((x) << QCA8K_EGREES_VLAN_PORT_SHIFT(_i))
+#define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2)))
+
+/* L3 registers */
+#define QCA8K_HROUTER_CONTROL 0xe00
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M GENMASK(17, 16)
+#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S 16
+#define QCA8K_HROUTER_CONTROL_ARP_AGE_MODE 1
+#define QCA8K_HROUTER_PBASED_CONTROL1 0xe08
+#define QCA8K_HROUTER_PBASED_CONTROL2 0xe0c
+#define QCA8K_HNAT_CONTROL 0xe38
+
+/* MIB registers */
+#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100)
+
+/* QCA specific MII registers */
+#define MII_ATH_MMD_ADDR 0x0d
+#define MII_ATH_MMD_DATA 0x0e
+
+enum {
+ QCA8K_PORT_SPEED_10M = 0,
+ QCA8K_PORT_SPEED_100M = 1,
+ QCA8K_PORT_SPEED_1000M = 2,
+ QCA8K_PORT_SPEED_ERR = 3,
+};
+
+enum qca8k_fdb_cmd {
+ QCA8K_FDB_FLUSH = 1,
+ QCA8K_FDB_LOAD = 2,
+ QCA8K_FDB_PURGE = 3,
+ QCA8K_FDB_FLUSH_PORT = 5,
+ QCA8K_FDB_NEXT = 6,
+ QCA8K_FDB_SEARCH = 7,
+};
+
+enum qca8k_vlan_cmd {
+ QCA8K_VLAN_FLUSH = 1,
+ QCA8K_VLAN_LOAD = 2,
+ QCA8K_VLAN_PURGE = 3,
+ QCA8K_VLAN_REMOVE_PORT = 4,
+ QCA8K_VLAN_NEXT = 5,
+ QCA8K_VLAN_READ = 6,
+};
+
+enum qca8k_mid_cmd {
+ QCA8K_MIB_FLUSH = 1,
+ QCA8K_MIB_FLUSH_PORT = 2,
+ QCA8K_MIB_CAST = 3,
+};
+
+struct qca8k_priv;
+
+struct qca8k_info_ops {
+ int (*autocast_mib)(struct dsa_switch *ds, int port, u64 *data);
+ /* TODO: remove these extra ops when we can support regmap bulk read/write */
+ int (*read_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
+ int (*write_eth)(struct qca8k_priv *priv, u32 reg, u32 *val, int len);
+};
+
+struct qca8k_match_data {
+ u8 id;
+ bool reduced_package;
+ u8 mib_count;
+ const struct qca8k_info_ops *ops;
+};
+
+enum {
+ QCA8K_CPU_PORT0,
+ QCA8K_CPU_PORT6,
+};
+
+struct qca8k_mgmt_eth_data {
+ struct completion rw_done;
+ struct mutex mutex; /* Enforce one mdio read/write at time */
+ bool ack;
+ u32 seq;
+ u32 data[4];
+};
+
+struct qca8k_mib_eth_data {
+ struct completion rw_done;
+ struct mutex mutex; /* Process one command at time */
+ refcount_t port_parsed; /* Counter to track parsed port */
+ u8 req_port;
+ u64 *data; /* pointer to ethtool data */
+};
+
+struct qca8k_ports_config {
+ bool sgmii_rx_clk_falling_edge;
+ bool sgmii_tx_clk_falling_edge;
+ bool sgmii_enable_pll;
+ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */
+};
+
+struct qca8k_mdio_cache {
+/* The 32bit switch registers are accessed indirectly. To achieve this we need
+ * to set the page of the register. Track the last page that was set to reduce
+ * mdio writes
+ */
+ u16 page;
+};
+
+struct qca8k_pcs {
+ struct phylink_pcs pcs;
+ struct qca8k_priv *priv;
+ int port;
+};
+
+struct qca8k_priv {
+ u8 switch_id;
+ u8 switch_revision;
+ u8 mirror_rx;
+ u8 mirror_tx;
+ u8 lag_hash_mode;
+ /* Each bit correspond to a port. This switch can support a max of 7 port.
+ * Bit 1: port enabled. Bit 0: port disabled.
+ */
+ u8 port_enabled_map;
+ struct qca8k_ports_config ports_config;
+ struct regmap *regmap;
+ struct mii_bus *bus;
+ struct dsa_switch *ds;
+ struct mutex reg_mutex;
+ struct device *dev;
+ struct gpio_desc *reset_gpio;
+ struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */
+ struct qca8k_mgmt_eth_data mgmt_eth_data;
+ struct qca8k_mib_eth_data mib_eth_data;
+ struct qca8k_mdio_cache mdio_cache;
+ struct qca8k_pcs pcs_port_0;
+ struct qca8k_pcs pcs_port_6;
+ const struct qca8k_match_data *info;
+};
+
+struct qca8k_mib_desc {
+ unsigned int size;
+ unsigned int offset;
+ const char *name;
+};
+
+struct qca8k_fdb {
+ u16 vid;
+ u8 port_mask;
+ u8 aging;
+ u8 mac[6];
+};
+
+/* Common setup function */
+extern const struct qca8k_mib_desc ar8327_mib[];
+extern const struct regmap_access_table qca8k_readable_table;
+int qca8k_mib_init(struct qca8k_priv *priv);
+void qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable);
+int qca8k_read_switch_id(struct qca8k_priv *priv);
+
+/* Common read/write/rmw function */
+int qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val);
+int qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val);
+int qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val);
+
+/* Common ops function */
+void qca8k_fdb_flush(struct qca8k_priv *priv);
+
+/* Common ethtool stats function */
+void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data);
+void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
+ uint64_t *data);
+int qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset);
+
+/* Common eee function */
+int qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee);
+int qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+
+/* Common bridge function */
+void qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
+int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack);
+void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge);
+
+/* Common port enable/disable function */
+int qca8k_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy);
+void qca8k_port_disable(struct dsa_switch *ds, int port);
+
+/* Common MTU function */
+int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu);
+int qca8k_port_max_mtu(struct dsa_switch *ds, int port);
+
+/* Common fast age function */
+void qca8k_port_fast_age(struct dsa_switch *ds, int port);
+int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs);
+
+/* Common FDB function */
+int qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
+ u16 port_mask, u16 vid);
+int qca8k_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db);
+int qca8k_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db);
+int qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data);
+
+/* Common MDB function */
+int qca8k_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db);
+int qca8k_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db);
+
+/* Common port mirror function */
+int qca8k_port_mirror_add(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror,
+ bool ingress, struct netlink_ext_ack *extack);
+void qca8k_port_mirror_del(struct dsa_switch *ds, int port,
+ struct dsa_mall_mirror_tc_entry *mirror);
+
+/* Common port VLAN function */
+int qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack);
+int qca8k_port_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack);
+int qca8k_port_vlan_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan);
+
+/* Common port LAG function */
+int qca8k_port_lag_join(struct dsa_switch *ds, int port, struct dsa_lag lag,
+ struct netdev_lag_upper_info *info,
+ struct netlink_ext_ack *extack);
+int qca8k_port_lag_leave(struct dsa_switch *ds, int port,
+ struct dsa_lag lag);
+
+#endif /* __QCA8K_H */