diff options
Diffstat (limited to 'drivers/net/ethernet/ezchip')
-rw-r--r-- | drivers/net/ethernet/ezchip/Kconfig | 28 | ||||
-rw-r--r-- | drivers/net/ethernet/ezchip/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/ezchip/nps_enet.c | 667 | ||||
-rw-r--r-- | drivers/net/ethernet/ezchip/nps_enet.h | 193 |
4 files changed, 890 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ezchip/Kconfig b/drivers/net/ethernet/ezchip/Kconfig new file mode 100644 index 000000000..9241b9b1c --- /dev/null +++ b/drivers/net/ethernet/ezchip/Kconfig @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# EZchip network device configuration +# + +config NET_VENDOR_EZCHIP + bool "EZchip devices" + default y + help + If you have a network (Ethernet) device belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about EZchip devices. If you say Y, you will be asked for + your specific device in the following questions. + +if NET_VENDOR_EZCHIP + +config EZCHIP_NPS_MANAGEMENT_ENET + tristate "EZchip NPS management enet support" + depends on OF_IRQ + depends on HAS_IOMEM + help + Simple LAN device for debug or management purposes. + Device supports interrupts for RX and TX(completion). + Device does not have DMA ability. + +endif diff --git a/drivers/net/ethernet/ezchip/Makefile b/drivers/net/ethernet/ezchip/Makefile new file mode 100644 index 000000000..444570f35 --- /dev/null +++ b/drivers/net/ethernet/ezchip/Makefile @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_EZCHIP_NPS_MANAGEMENT_ENET) += nps_enet.o diff --git a/drivers/net/ethernet/ezchip/nps_enet.c b/drivers/net/ethernet/ezchip/nps_enet.c new file mode 100644 index 000000000..f1eb660aa --- /dev/null +++ b/drivers/net/ethernet/ezchip/nps_enet.c @@ -0,0 +1,667 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright(c) 2015 EZchip Technologies. + */ + +#include <linux/module.h> +#include <linux/etherdevice.h> +#include <linux/interrupt.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/of_net.h> +#include <linux/of_platform.h> +#include "nps_enet.h" + +#define DRV_NAME "nps_mgt_enet" + +static inline bool nps_enet_is_tx_pending(struct nps_enet_priv *priv) +{ + u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); + u32 tx_ctrl_ct = (tx_ctrl_value & TX_CTL_CT_MASK) >> TX_CTL_CT_SHIFT; + + return (!tx_ctrl_ct && priv->tx_skb); +} + +static void nps_enet_clean_rx_fifo(struct net_device *ndev, u32 frame_len) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 i, len = DIV_ROUND_UP(frame_len, sizeof(u32)); + + /* Empty Rx FIFO buffer by reading all words */ + for (i = 0; i < len; i++) + nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); +} + +static void nps_enet_read_rx_fifo(struct net_device *ndev, + unsigned char *dst, u32 length) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + s32 i, last = length & (sizeof(u32) - 1); + u32 *reg = (u32 *)dst, len = length / sizeof(u32); + bool dst_is_aligned = IS_ALIGNED((unsigned long)dst, sizeof(u32)); + + /* In case dst is not aligned we need an intermediate buffer */ + if (dst_is_aligned) { + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, reg, len); + reg += len; + } else { /* !dst_is_aligned */ + for (i = 0; i < len; i++, reg++) { + u32 buf = nps_enet_reg_get(priv, NPS_ENET_REG_RX_BUF); + + put_unaligned_be32(buf, reg); + } + } + /* copy last bytes (if any) */ + if (last) { + u32 buf; + + ioread32_rep(priv->regs_base + NPS_ENET_REG_RX_BUF, &buf, 1); + memcpy((u8 *)reg, &buf, last); + } +} + +static u32 nps_enet_rx_handler(struct net_device *ndev) +{ + u32 frame_len, err = 0; + u32 work_done = 0; + struct nps_enet_priv *priv = netdev_priv(ndev); + struct sk_buff *skb; + u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); + u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT; + u32 rx_ctrl_er = (rx_ctrl_value & RX_CTL_ER_MASK) >> RX_CTL_ER_SHIFT; + u32 rx_ctrl_crc = (rx_ctrl_value & RX_CTL_CRC_MASK) >> RX_CTL_CRC_SHIFT; + + frame_len = (rx_ctrl_value & RX_CTL_NR_MASK) >> RX_CTL_NR_SHIFT; + + /* Check if we got RX */ + if (!rx_ctrl_cr) + return work_done; + + /* If we got here there is a work for us */ + work_done++; + + /* Check Rx error */ + if (rx_ctrl_er) { + ndev->stats.rx_errors++; + err = 1; + } + + /* Check Rx CRC error */ + if (rx_ctrl_crc) { + ndev->stats.rx_crc_errors++; + ndev->stats.rx_dropped++; + err = 1; + } + + /* Check Frame length Min 64b */ + if (unlikely(frame_len < ETH_ZLEN)) { + ndev->stats.rx_length_errors++; + ndev->stats.rx_dropped++; + err = 1; + } + + if (err) + goto rx_irq_clean; + + /* Skb allocation */ + skb = netdev_alloc_skb_ip_align(ndev, frame_len); + if (unlikely(!skb)) { + ndev->stats.rx_errors++; + ndev->stats.rx_dropped++; + goto rx_irq_clean; + } + + /* Copy frame from Rx fifo into the skb */ + nps_enet_read_rx_fifo(ndev, skb->data, frame_len); + + skb_put(skb, frame_len); + skb->protocol = eth_type_trans(skb, ndev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + ndev->stats.rx_packets++; + ndev->stats.rx_bytes += frame_len; + netif_receive_skb(skb); + + goto rx_irq_frame_done; + +rx_irq_clean: + /* Clean Rx fifo */ + nps_enet_clean_rx_fifo(ndev, frame_len); + +rx_irq_frame_done: + /* Ack Rx ctrl register */ + nps_enet_reg_set(priv, NPS_ENET_REG_RX_CTL, 0); + + return work_done; +} + +static void nps_enet_tx_handler(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 tx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_TX_CTL); + u32 tx_ctrl_et = (tx_ctrl_value & TX_CTL_ET_MASK) >> TX_CTL_ET_SHIFT; + u32 tx_ctrl_nt = (tx_ctrl_value & TX_CTL_NT_MASK) >> TX_CTL_NT_SHIFT; + + /* Check if we got TX */ + if (!nps_enet_is_tx_pending(priv)) + return; + + /* Ack Tx ctrl register */ + nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, 0); + + /* Check Tx transmit error */ + if (unlikely(tx_ctrl_et)) { + ndev->stats.tx_errors++; + } else { + ndev->stats.tx_packets++; + ndev->stats.tx_bytes += tx_ctrl_nt; + } + + dev_kfree_skb(priv->tx_skb); + priv->tx_skb = NULL; + + if (netif_queue_stopped(ndev)) + netif_wake_queue(ndev); +} + +/** + * nps_enet_poll - NAPI poll handler. + * @napi: Pointer to napi_struct structure. + * @budget: How many frames to process on one call. + * + * returns: Number of processed frames + */ +static int nps_enet_poll(struct napi_struct *napi, int budget) +{ + struct net_device *ndev = napi->dev; + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 work_done; + + nps_enet_tx_handler(ndev); + work_done = nps_enet_rx_handler(ndev); + if ((work_done < budget) && napi_complete_done(napi, work_done)) { + u32 buf_int_enable_value = 0; + + /* set tx_done and rx_rdy bits */ + buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT; + buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT; + + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, + buf_int_enable_value); + + /* in case we will get a tx interrupt while interrupts + * are masked, we will lose it since the tx is edge interrupt. + * specifically, while executing the code section above, + * between nps_enet_tx_handler and the interrupts enable, all + * tx requests will be stuck until we will get an rx interrupt. + * the two code lines below will solve this situation by + * re-adding ourselves to the poll list. + */ + if (nps_enet_is_tx_pending(priv)) { + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); + napi_reschedule(napi); + } + } + + return work_done; +} + +/** + * nps_enet_irq_handler - Global interrupt handler for ENET. + * @irq: irq number. + * @dev_instance: device instance. + * + * returns: IRQ_HANDLED for all cases. + * + * EZchip ENET has 2 interrupt causes, and depending on bits raised in + * CTRL registers we may tell what is a reason for interrupt to fire up. + * We got one for RX and the other for TX (completion). + */ +static irqreturn_t nps_enet_irq_handler(s32 irq, void *dev_instance) +{ + struct net_device *ndev = dev_instance; + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 rx_ctrl_value = nps_enet_reg_get(priv, NPS_ENET_REG_RX_CTL); + u32 rx_ctrl_cr = (rx_ctrl_value & RX_CTL_CR_MASK) >> RX_CTL_CR_SHIFT; + + if (nps_enet_is_tx_pending(priv) || rx_ctrl_cr) + if (likely(napi_schedule_prep(&priv->napi))) { + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); + __napi_schedule(&priv->napi); + } + + return IRQ_HANDLED; +} + +static void nps_enet_set_hw_mac_address(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 ge_mac_cfg_1_value = 0; + u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value; + + /* set MAC address in HW */ + ge_mac_cfg_1_value |= ndev->dev_addr[0] << CFG_1_OCTET_0_SHIFT; + ge_mac_cfg_1_value |= ndev->dev_addr[1] << CFG_1_OCTET_1_SHIFT; + ge_mac_cfg_1_value |= ndev->dev_addr[2] << CFG_1_OCTET_2_SHIFT; + ge_mac_cfg_1_value |= ndev->dev_addr[3] << CFG_1_OCTET_3_SHIFT; + *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_4_MASK) + | ndev->dev_addr[4] << CFG_2_OCTET_4_SHIFT; + *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_OCTET_5_MASK) + | ndev->dev_addr[5] << CFG_2_OCTET_5_SHIFT; + + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_1, + ge_mac_cfg_1_value); + + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, + *ge_mac_cfg_2_value); +} + +/** + * nps_enet_hw_reset - Reset the network device. + * @ndev: Pointer to the network device. + * + * This function reset the PCS and TX fifo. + * The programming model is to set the relevant reset bits + * wait for some time for this to propagate and then unset + * the reset bits. This way we ensure that reset procedure + * is done successfully by device. + */ +static void nps_enet_hw_reset(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 ge_rst_value = 0, phase_fifo_ctl_value = 0; + + /* Pcs reset sequence*/ + ge_rst_value |= NPS_ENET_ENABLE << RST_GMAC_0_SHIFT; + nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); + usleep_range(10, 20); + ge_rst_value = 0; + nps_enet_reg_set(priv, NPS_ENET_REG_GE_RST, ge_rst_value); + + /* Tx fifo reset sequence */ + phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_RST_SHIFT; + phase_fifo_ctl_value |= NPS_ENET_ENABLE << PHASE_FIFO_CTL_INIT_SHIFT; + nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, + phase_fifo_ctl_value); + usleep_range(10, 20); + phase_fifo_ctl_value = 0; + nps_enet_reg_set(priv, NPS_ENET_REG_PHASE_FIFO_CTL, + phase_fifo_ctl_value); +} + +static void nps_enet_hw_enable_control(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 ge_mac_cfg_0_value = 0, buf_int_enable_value = 0; + u32 *ge_mac_cfg_2_value = &priv->ge_mac_cfg_2_value; + u32 *ge_mac_cfg_3_value = &priv->ge_mac_cfg_3_value; + s32 max_frame_length; + + /* Enable Rx and Tx statistics */ + *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_STAT_EN_MASK) + | NPS_ENET_GE_MAC_CFG_2_STAT_EN << CFG_2_STAT_EN_SHIFT; + + /* Discard packets with different MAC address */ + *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) + | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT; + + /* Discard multicast packets */ + *ge_mac_cfg_2_value = (*ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) + | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT; + + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, + *ge_mac_cfg_2_value); + + /* Discard Packets bigger than max frame length */ + max_frame_length = ETH_HLEN + ndev->mtu + ETH_FCS_LEN; + if (max_frame_length <= NPS_ENET_MAX_FRAME_LENGTH) { + *ge_mac_cfg_3_value = + (*ge_mac_cfg_3_value & ~CFG_3_MAX_LEN_MASK) + | max_frame_length << CFG_3_MAX_LEN_SHIFT; + } + + /* Enable interrupts */ + buf_int_enable_value |= NPS_ENET_ENABLE << RX_RDY_SHIFT; + buf_int_enable_value |= NPS_ENET_ENABLE << TX_DONE_SHIFT; + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, + buf_int_enable_value); + + /* Write device MAC address to HW */ + nps_enet_set_hw_mac_address(ndev); + + /* Rx and Tx HW features */ + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_PAD_EN_SHIFT; + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_CRC_EN_SHIFT; + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_CRC_STRIP_SHIFT; + + /* IFG configuration */ + ge_mac_cfg_0_value |= + NPS_ENET_GE_MAC_CFG_0_RX_IFG << CFG_0_RX_IFG_SHIFT; + ge_mac_cfg_0_value |= + NPS_ENET_GE_MAC_CFG_0_TX_IFG << CFG_0_TX_IFG_SHIFT; + + /* preamble configuration */ + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_PR_CHECK_EN_SHIFT; + ge_mac_cfg_0_value |= + NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN << CFG_0_TX_PR_LEN_SHIFT; + + /* enable flow control frames */ + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_FC_EN_SHIFT; + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_FC_EN_SHIFT; + ge_mac_cfg_0_value |= + NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR << CFG_0_TX_FC_RETR_SHIFT; + *ge_mac_cfg_3_value = (*ge_mac_cfg_3_value & ~CFG_3_CF_DROP_MASK) + | NPS_ENET_ENABLE << CFG_3_CF_DROP_SHIFT; + + /* Enable Rx and Tx */ + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_RX_EN_SHIFT; + ge_mac_cfg_0_value |= NPS_ENET_ENABLE << CFG_0_TX_EN_SHIFT; + + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_3, + *ge_mac_cfg_3_value); + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, + ge_mac_cfg_0_value); +} + +static void nps_enet_hw_disable_control(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + + /* Disable interrupts */ + nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0); + + /* Disable Rx and Tx */ + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_0, 0); +} + +static void nps_enet_send_frame(struct net_device *ndev, + struct sk_buff *skb) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 tx_ctrl_value = 0; + short length = skb->len; + u32 i, len = DIV_ROUND_UP(length, sizeof(u32)); + u32 *src = (void *)skb->data; + bool src_is_aligned = IS_ALIGNED((unsigned long)src, sizeof(u32)); + + /* In case src is not aligned we need an intermediate buffer */ + if (src_is_aligned) + iowrite32_rep(priv->regs_base + NPS_ENET_REG_TX_BUF, src, len); + else /* !src_is_aligned */ + for (i = 0; i < len; i++, src++) + nps_enet_reg_set(priv, NPS_ENET_REG_TX_BUF, + get_unaligned_be32(src)); + + /* Write the length of the Frame */ + tx_ctrl_value |= length << TX_CTL_NT_SHIFT; + + tx_ctrl_value |= NPS_ENET_ENABLE << TX_CTL_CT_SHIFT; + /* Send Frame */ + nps_enet_reg_set(priv, NPS_ENET_REG_TX_CTL, tx_ctrl_value); +} + +/** + * nps_enet_set_mac_address - Set the MAC address for this device. + * @ndev: Pointer to net_device structure. + * @p: 6 byte Address to be written as MAC address. + * + * This function copies the HW address from the sockaddr structure to the + * net_device structure and updates the address in HW. + * + * returns: -EBUSY if the net device is busy or 0 if the address is set + * successfully. + */ +static s32 nps_enet_set_mac_address(struct net_device *ndev, void *p) +{ + struct sockaddr *addr = p; + s32 res; + + if (netif_running(ndev)) + return -EBUSY; + + res = eth_mac_addr(ndev, p); + if (!res) { + eth_hw_addr_set(ndev, addr->sa_data); + nps_enet_set_hw_mac_address(ndev); + } + + return res; +} + +/** + * nps_enet_set_rx_mode - Change the receive filtering mode. + * @ndev: Pointer to the network device. + * + * This function enables/disables promiscuous mode + */ +static void nps_enet_set_rx_mode(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + u32 ge_mac_cfg_2_value = priv->ge_mac_cfg_2_value; + + if (ndev->flags & IFF_PROMISC) { + ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) + | NPS_ENET_DISABLE << CFG_2_DISK_DA_SHIFT; + ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) + | NPS_ENET_DISABLE << CFG_2_DISK_MC_SHIFT; + + } else { + ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_DA_MASK) + | NPS_ENET_ENABLE << CFG_2_DISK_DA_SHIFT; + ge_mac_cfg_2_value = (ge_mac_cfg_2_value & ~CFG_2_DISK_MC_MASK) + | NPS_ENET_ENABLE << CFG_2_DISK_MC_SHIFT; + } + + nps_enet_reg_set(priv, NPS_ENET_REG_GE_MAC_CFG_2, ge_mac_cfg_2_value); +} + +/** + * nps_enet_open - Open the network device. + * @ndev: Pointer to the network device. + * + * returns: 0, on success or non-zero error value on failure. + * + * This function sets the MAC address, requests and enables an IRQ + * for the ENET device and starts the Tx queue. + */ +static s32 nps_enet_open(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + s32 err; + + /* Reset private variables */ + priv->tx_skb = NULL; + priv->ge_mac_cfg_2_value = 0; + priv->ge_mac_cfg_3_value = 0; + + /* ge_mac_cfg_3 default values */ + priv->ge_mac_cfg_3_value |= + NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH << CFG_3_RX_IFG_TH_SHIFT; + + priv->ge_mac_cfg_3_value |= + NPS_ENET_GE_MAC_CFG_3_MAX_LEN << CFG_3_MAX_LEN_SHIFT; + + /* Disable HW device */ + nps_enet_hw_disable_control(ndev); + + /* irq Rx allocation */ + err = request_irq(priv->irq, nps_enet_irq_handler, + 0, "enet-rx-tx", ndev); + if (err) + return err; + + napi_enable(&priv->napi); + + /* Enable HW device */ + nps_enet_hw_reset(ndev); + nps_enet_hw_enable_control(ndev); + + netif_start_queue(ndev); + + return 0; +} + +/** + * nps_enet_stop - Close the network device. + * @ndev: Pointer to the network device. + * + * This function stops the Tx queue, disables interrupts for the ENET device. + */ +static s32 nps_enet_stop(struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + + napi_disable(&priv->napi); + netif_stop_queue(ndev); + nps_enet_hw_disable_control(ndev); + free_irq(priv->irq, ndev); + + return 0; +} + +/** + * nps_enet_start_xmit - Starts the data transmission. + * @skb: sk_buff pointer that contains data to be Transmitted. + * @ndev: Pointer to net_device structure. + * + * returns: NETDEV_TX_OK, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free. + * + * This function is invoked from upper layers to initiate transmission. + */ +static netdev_tx_t nps_enet_start_xmit(struct sk_buff *skb, + struct net_device *ndev) +{ + struct nps_enet_priv *priv = netdev_priv(ndev); + + /* This driver handles one frame at a time */ + netif_stop_queue(ndev); + + priv->tx_skb = skb; + + /* make sure tx_skb is actually written to the memory + * before the HW is informed and the IRQ is fired. + */ + wmb(); + + nps_enet_send_frame(ndev, skb); + + return NETDEV_TX_OK; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void nps_enet_poll_controller(struct net_device *ndev) +{ + disable_irq(ndev->irq); + nps_enet_irq_handler(ndev->irq, ndev); + enable_irq(ndev->irq); +} +#endif + +static const struct net_device_ops nps_netdev_ops = { + .ndo_open = nps_enet_open, + .ndo_stop = nps_enet_stop, + .ndo_start_xmit = nps_enet_start_xmit, + .ndo_set_mac_address = nps_enet_set_mac_address, + .ndo_set_rx_mode = nps_enet_set_rx_mode, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = nps_enet_poll_controller, +#endif +}; + +static s32 nps_enet_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct net_device *ndev; + struct nps_enet_priv *priv; + s32 err = 0; + + if (!dev->of_node) + return -ENODEV; + + ndev = alloc_etherdev(sizeof(struct nps_enet_priv)); + if (!ndev) + return -ENOMEM; + + platform_set_drvdata(pdev, ndev); + SET_NETDEV_DEV(ndev, dev); + priv = netdev_priv(ndev); + + /* The EZ NET specific entries in the device structure. */ + ndev->netdev_ops = &nps_netdev_ops; + ndev->watchdog_timeo = (400 * HZ / 1000); + /* FIXME :: no multicast support yet */ + ndev->flags &= ~IFF_MULTICAST; + + priv->regs_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->regs_base)) { + err = PTR_ERR(priv->regs_base); + goto out_netdev; + } + dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs_base); + + /* set kernel MAC address to dev */ + err = of_get_ethdev_address(dev->of_node, ndev); + if (err) + eth_hw_addr_random(ndev); + + /* Get IRQ number */ + priv->irq = platform_get_irq(pdev, 0); + if (priv->irq < 0) { + err = -ENODEV; + goto out_netdev; + } + + netif_napi_add_weight(ndev, &priv->napi, nps_enet_poll, + NPS_ENET_NAPI_POLL_WEIGHT); + + /* Register the driver. Should be the last thing in probe */ + err = register_netdev(ndev); + if (err) { + dev_err(dev, "Failed to register ndev for %s, err = 0x%08x\n", + ndev->name, (s32)err); + goto out_netif_api; + } + + dev_info(dev, "(rx/tx=%d)\n", priv->irq); + return 0; + +out_netif_api: + netif_napi_del(&priv->napi); +out_netdev: + free_netdev(ndev); + + return err; +} + +static s32 nps_enet_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct nps_enet_priv *priv = netdev_priv(ndev); + + unregister_netdev(ndev); + netif_napi_del(&priv->napi); + free_netdev(ndev); + + return 0; +} + +static const struct of_device_id nps_enet_dt_ids[] = { + { .compatible = "ezchip,nps-mgt-enet" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, nps_enet_dt_ids); + +static struct platform_driver nps_enet_driver = { + .probe = nps_enet_probe, + .remove = nps_enet_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = nps_enet_dt_ids, + }, +}; + +module_platform_driver(nps_enet_driver); + +MODULE_AUTHOR("EZchip Semiconductor"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/ethernet/ezchip/nps_enet.h b/drivers/net/ethernet/ezchip/nps_enet.h new file mode 100644 index 000000000..092da2d90 --- /dev/null +++ b/drivers/net/ethernet/ezchip/nps_enet.h @@ -0,0 +1,193 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright(c) 2015 EZchip Technologies. + */ + +#ifndef _NPS_ENET_H +#define _NPS_ENET_H + +/* default values */ +#define NPS_ENET_NAPI_POLL_WEIGHT 0x2 +#define NPS_ENET_MAX_FRAME_LENGTH 0x3FFF +#define NPS_ENET_GE_MAC_CFG_0_TX_FC_RETR 0x7 +#define NPS_ENET_GE_MAC_CFG_0_RX_IFG 0x5 +#define NPS_ENET_GE_MAC_CFG_0_TX_IFG 0xC +#define NPS_ENET_GE_MAC_CFG_0_TX_PR_LEN 0x7 +#define NPS_ENET_GE_MAC_CFG_2_STAT_EN 0x3 +#define NPS_ENET_GE_MAC_CFG_3_RX_IFG_TH 0x14 +#define NPS_ENET_GE_MAC_CFG_3_MAX_LEN 0x3FFC +#define NPS_ENET_ENABLE 1 +#define NPS_ENET_DISABLE 0 + +/* register definitions */ +#define NPS_ENET_REG_TX_CTL 0x800 +#define NPS_ENET_REG_TX_BUF 0x808 +#define NPS_ENET_REG_RX_CTL 0x810 +#define NPS_ENET_REG_RX_BUF 0x818 +#define NPS_ENET_REG_BUF_INT_ENABLE 0x8C0 +#define NPS_ENET_REG_GE_MAC_CFG_0 0x1000 +#define NPS_ENET_REG_GE_MAC_CFG_1 0x1004 +#define NPS_ENET_REG_GE_MAC_CFG_2 0x1008 +#define NPS_ENET_REG_GE_MAC_CFG_3 0x100C +#define NPS_ENET_REG_GE_RST 0x1400 +#define NPS_ENET_REG_PHASE_FIFO_CTL 0x1404 + +/* Tx control register masks and shifts */ +#define TX_CTL_NT_MASK 0x7FF +#define TX_CTL_NT_SHIFT 0 +#define TX_CTL_ET_MASK 0x4000 +#define TX_CTL_ET_SHIFT 14 +#define TX_CTL_CT_MASK 0x8000 +#define TX_CTL_CT_SHIFT 15 + +/* Rx control register masks and shifts */ +#define RX_CTL_NR_MASK 0x7FF +#define RX_CTL_NR_SHIFT 0 +#define RX_CTL_CRC_MASK 0x2000 +#define RX_CTL_CRC_SHIFT 13 +#define RX_CTL_ER_MASK 0x4000 +#define RX_CTL_ER_SHIFT 14 +#define RX_CTL_CR_MASK 0x8000 +#define RX_CTL_CR_SHIFT 15 + +/* Interrupt enable for data buffer events register masks and shifts */ +#define RX_RDY_MASK 0x1 +#define RX_RDY_SHIFT 0 +#define TX_DONE_MASK 0x2 +#define TX_DONE_SHIFT 1 + +/* Gbps Eth MAC Configuration 0 register masks and shifts */ +#define CFG_0_RX_EN_MASK 0x1 +#define CFG_0_RX_EN_SHIFT 0 +#define CFG_0_TX_EN_MASK 0x2 +#define CFG_0_TX_EN_SHIFT 1 +#define CFG_0_TX_FC_EN_MASK 0x4 +#define CFG_0_TX_FC_EN_SHIFT 2 +#define CFG_0_TX_PAD_EN_MASK 0x8 +#define CFG_0_TX_PAD_EN_SHIFT 3 +#define CFG_0_TX_CRC_EN_MASK 0x10 +#define CFG_0_TX_CRC_EN_SHIFT 4 +#define CFG_0_RX_FC_EN_MASK 0x20 +#define CFG_0_RX_FC_EN_SHIFT 5 +#define CFG_0_RX_CRC_STRIP_MASK 0x40 +#define CFG_0_RX_CRC_STRIP_SHIFT 6 +#define CFG_0_RX_CRC_IGNORE_MASK 0x80 +#define CFG_0_RX_CRC_IGNORE_SHIFT 7 +#define CFG_0_RX_LENGTH_CHECK_EN_MASK 0x100 +#define CFG_0_RX_LENGTH_CHECK_EN_SHIFT 8 +#define CFG_0_TX_FC_RETR_MASK 0xE00 +#define CFG_0_TX_FC_RETR_SHIFT 9 +#define CFG_0_RX_IFG_MASK 0xF000 +#define CFG_0_RX_IFG_SHIFT 12 +#define CFG_0_TX_IFG_MASK 0x3F0000 +#define CFG_0_TX_IFG_SHIFT 16 +#define CFG_0_RX_PR_CHECK_EN_MASK 0x400000 +#define CFG_0_RX_PR_CHECK_EN_SHIFT 22 +#define CFG_0_NIB_MODE_MASK 0x800000 +#define CFG_0_NIB_MODE_SHIFT 23 +#define CFG_0_TX_IFG_NIB_MASK 0xF000000 +#define CFG_0_TX_IFG_NIB_SHIFT 24 +#define CFG_0_TX_PR_LEN_MASK 0xF0000000 +#define CFG_0_TX_PR_LEN_SHIFT 28 + +/* Gbps Eth MAC Configuration 1 register masks and shifts */ +#define CFG_1_OCTET_0_MASK 0x000000FF +#define CFG_1_OCTET_0_SHIFT 0 +#define CFG_1_OCTET_1_MASK 0x0000FF00 +#define CFG_1_OCTET_1_SHIFT 8 +#define CFG_1_OCTET_2_MASK 0x00FF0000 +#define CFG_1_OCTET_2_SHIFT 16 +#define CFG_1_OCTET_3_MASK 0xFF000000 +#define CFG_1_OCTET_3_SHIFT 24 + +/* Gbps Eth MAC Configuration 2 register masks and shifts */ +#define CFG_2_OCTET_4_MASK 0x000000FF +#define CFG_2_OCTET_4_SHIFT 0 +#define CFG_2_OCTET_5_MASK 0x0000FF00 +#define CFG_2_OCTET_5_SHIFT 8 +#define CFG_2_DISK_MC_MASK 0x00100000 +#define CFG_2_DISK_MC_SHIFT 20 +#define CFG_2_DISK_BC_MASK 0x00200000 +#define CFG_2_DISK_BC_SHIFT 21 +#define CFG_2_DISK_DA_MASK 0x00400000 +#define CFG_2_DISK_DA_SHIFT 22 +#define CFG_2_STAT_EN_MASK 0x3000000 +#define CFG_2_STAT_EN_SHIFT 24 +#define CFG_2_TRANSMIT_FLUSH_EN_MASK 0x80000000 +#define CFG_2_TRANSMIT_FLUSH_EN_SHIFT 31 + +/* Gbps Eth MAC Configuration 3 register masks and shifts */ +#define CFG_3_TM_HD_MODE_MASK 0x1 +#define CFG_3_TM_HD_MODE_SHIFT 0 +#define CFG_3_RX_CBFC_EN_MASK 0x2 +#define CFG_3_RX_CBFC_EN_SHIFT 1 +#define CFG_3_RX_CBFC_REDIR_EN_MASK 0x4 +#define CFG_3_RX_CBFC_REDIR_EN_SHIFT 2 +#define CFG_3_REDIRECT_CBFC_SEL_MASK 0x18 +#define CFG_3_REDIRECT_CBFC_SEL_SHIFT 3 +#define CFG_3_CF_DROP_MASK 0x20 +#define CFG_3_CF_DROP_SHIFT 5 +#define CFG_3_CF_TIMEOUT_MASK 0x3C0 +#define CFG_3_CF_TIMEOUT_SHIFT 6 +#define CFG_3_RX_IFG_TH_MASK 0x7C00 +#define CFG_3_RX_IFG_TH_SHIFT 10 +#define CFG_3_TX_CBFC_EN_MASK 0x8000 +#define CFG_3_TX_CBFC_EN_SHIFT 15 +#define CFG_3_MAX_LEN_MASK 0x3FFF0000 +#define CFG_3_MAX_LEN_SHIFT 16 +#define CFG_3_EXT_OOB_CBFC_SEL_MASK 0xC0000000 +#define CFG_3_EXT_OOB_CBFC_SEL_SHIFT 30 + +/* GE MAC, PCS reset control register masks and shifts */ +#define RST_SPCS_MASK 0x1 +#define RST_SPCS_SHIFT 0 +#define RST_GMAC_0_MASK 0x100 +#define RST_GMAC_0_SHIFT 8 + +/* Tx phase sync FIFO control register masks and shifts */ +#define PHASE_FIFO_CTL_RST_MASK 0x1 +#define PHASE_FIFO_CTL_RST_SHIFT 0 +#define PHASE_FIFO_CTL_INIT_MASK 0x2 +#define PHASE_FIFO_CTL_INIT_SHIFT 1 + +/** + * struct nps_enet_priv - Storage of ENET's private information. + * @regs_base: Base address of ENET memory-mapped control registers. + * @irq: For RX/TX IRQ number. + * @tx_skb: socket buffer of sent frame. + * @napi: Structure for NAPI. + */ +struct nps_enet_priv { + void __iomem *regs_base; + s32 irq; + struct sk_buff *tx_skb; + struct napi_struct napi; + u32 ge_mac_cfg_2_value; + u32 ge_mac_cfg_3_value; +}; + +/** + * nps_enet_reg_set - Sets ENET register with provided value. + * @priv: Pointer to EZchip ENET private data structure. + * @reg: Register offset from base address. + * @value: Value to set in register. + */ +static inline void nps_enet_reg_set(struct nps_enet_priv *priv, + s32 reg, s32 value) +{ + iowrite32be(value, priv->regs_base + reg); +} + +/** + * nps_enet_reg_get - Gets value of specified ENET register. + * @priv: Pointer to EZchip ENET private data structure. + * @reg: Register offset from base address. + * + * returns: Value of requested register. + */ +static inline u32 nps_enet_reg_get(struct nps_enet_priv *priv, s32 reg) +{ + return ioread32be(priv->regs_base + reg); +} + +#endif /* _NPS_ENET_H */ |