diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_i225.c')
-rw-r--r-- | drivers/net/ethernet/intel/igc/igc_i225.c | 650 |
1 files changed, 650 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_i225.c b/drivers/net/ethernet/intel/igc/igc_i225.c new file mode 100644 index 000000000..59d5c467e --- /dev/null +++ b/drivers/net/ethernet/intel/igc/igc_i225.c @@ -0,0 +1,650 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018 Intel Corporation */ + +#include <linux/delay.h> + +#include "igc_hw.h" + +/** + * igc_acquire_nvm_i225 - Acquire exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Acquire the necessary semaphores for exclusive access to the EEPROM. + * Set the EEPROM access request bit and wait for EEPROM access grant bit. + * Return successful if access grant bit set, else clear the request for + * EEPROM access and return -IGC_ERR_NVM (-1). + */ +static s32 igc_acquire_nvm_i225(struct igc_hw *hw) +{ + return igc_acquire_swfw_sync_i225(hw, IGC_SWFW_EEP_SM); +} + +/** + * igc_release_nvm_i225 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit, + * then release the semaphores acquired. + */ +static void igc_release_nvm_i225(struct igc_hw *hw) +{ + igc_release_swfw_sync_i225(hw, IGC_SWFW_EEP_SM); +} + +/** + * igc_get_hw_semaphore_i225 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + */ +static s32 igc_get_hw_semaphore_i225(struct igc_hw *hw) +{ + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + u32 swsm; + + /* Get the SW semaphore */ + while (i < timeout) { + swsm = rd32(IGC_SWSM); + if (!(swsm & IGC_SWSM_SMBI)) + break; + + usleep_range(500, 600); + i++; + } + + if (i == timeout) { + /* In rare circumstances, the SW semaphore may already be held + * unintentionally. Clear the semaphore once before giving up. + */ + if (hw->dev_spec._base.clear_semaphore_once) { + hw->dev_spec._base.clear_semaphore_once = false; + igc_put_hw_semaphore(hw); + for (i = 0; i < timeout; i++) { + swsm = rd32(IGC_SWSM); + if (!(swsm & IGC_SWSM_SMBI)) + break; + + usleep_range(500, 600); + } + } + + /* If we do not have the semaphore here, we have to give up. */ + if (i == timeout) { + hw_dbg("Driver can't access device - SMBI bit is set.\n"); + return -IGC_ERR_NVM; + } + } + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = rd32(IGC_SWSM); + wr32(IGC_SWSM, swsm | IGC_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (rd32(IGC_SWSM) & IGC_SWSM_SWESMBI) + break; + + usleep_range(500, 600); + } + + if (i == timeout) { + /* Release semaphores */ + igc_put_hw_semaphore(hw); + hw_dbg("Driver can't access the NVM\n"); + return -IGC_ERR_NVM; + } + + return 0; +} + +/** + * igc_acquire_swfw_sync_i225 - Acquire SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Acquire the SW/FW semaphore to access the PHY or NVM. The mask + * will also specify which port we're acquiring the lock for. + */ +s32 igc_acquire_swfw_sync_i225(struct igc_hw *hw, u16 mask) +{ + s32 i = 0, timeout = 200; + u32 fwmask = mask << 16; + u32 swmask = mask; + s32 ret_val = 0; + u32 swfw_sync; + + while (i < timeout) { + if (igc_get_hw_semaphore_i225(hw)) { + ret_val = -IGC_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync = rd32(IGC_SW_FW_SYNC); + if (!(swfw_sync & (fwmask | swmask))) + break; + + /* Firmware currently using resource (fwmask) */ + igc_put_hw_semaphore(hw); + mdelay(5); + i++; + } + + if (i == timeout) { + hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); + ret_val = -IGC_ERR_SWFW_SYNC; + goto out; + } + + swfw_sync |= swmask; + wr32(IGC_SW_FW_SYNC, swfw_sync); + + igc_put_hw_semaphore(hw); +out: + return ret_val; +} + +/** + * igc_release_swfw_sync_i225 - Release SW/FW semaphore + * @hw: pointer to the HW structure + * @mask: specifies which semaphore to acquire + * + * Release the SW/FW semaphore used to access the PHY or NVM. The mask + * will also specify which port we're releasing the lock for. + */ +void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask) +{ + u32 swfw_sync; + + /* Releasing the resource requires first getting the HW semaphore. + * If we fail to get the semaphore, there is nothing we can do, + * except log an error and quit. We are not allowed to hang here + * indefinitely, as it may cause denial of service or system crash. + */ + if (igc_get_hw_semaphore_i225(hw)) { + hw_dbg("Failed to release SW_FW_SYNC.\n"); + return; + } + + swfw_sync = rd32(IGC_SW_FW_SYNC); + swfw_sync &= ~mask; + wr32(IGC_SW_FW_SYNC, swfw_sync); + + igc_put_hw_semaphore(hw); +} + +/** + * igc_read_nvm_srrd_i225 - Reads Shadow Ram using EERD register + * @hw: pointer to the HW structure + * @offset: offset of word in the Shadow Ram to read + * @words: number of words to read + * @data: word read from the Shadow Ram + * + * Reads a 16 bit word from the Shadow Ram using the EERD register. + * Uses necessary synchronization semaphores. + */ +static s32 igc_read_nvm_srrd_i225(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = 0; + u16 i, count; + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) { + count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ? + IGC_EERD_EEWR_MAX_COUNT : (words - i); + + status = hw->nvm.ops.acquire(hw); + if (status) + break; + + status = igc_read_nvm_eerd(hw, offset, count, data + i); + hw->nvm.ops.release(hw); + if (status) + break; + } + + return status; +} + +/** + * igc_write_nvm_srwr - Write to Shadow Ram using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow Ram to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow Ram + * + * Writes data to Shadow Ram at offset using EEWR register. + * + * If igc_update_nvm_checksum is not called after this function , the + * Shadow Ram will most likely contain an invalid checksum. + */ +static s32 igc_write_nvm_srwr(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + struct igc_nvm_info *nvm = &hw->nvm; + s32 ret_val = -IGC_ERR_NVM; + u32 attempts = 100000; + u32 i, k, eewr = 0; + + /* A check for invalid values: offset too large, too many words, + * too many words for the offset, and not enough words. + */ + if (offset >= nvm->word_size || (words > (nvm->word_size - offset)) || + words == 0) { + hw_dbg("nvm parameter(s) out of bounds\n"); + return ret_val; + } + + for (i = 0; i < words; i++) { + ret_val = -IGC_ERR_NVM; + eewr = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) | + (data[i] << IGC_NVM_RW_REG_DATA) | + IGC_NVM_RW_REG_START; + + wr32(IGC_SRWR, eewr); + + for (k = 0; k < attempts; k++) { + if (IGC_NVM_RW_REG_DONE & + rd32(IGC_SRWR)) { + ret_val = 0; + break; + } + udelay(5); + } + + if (ret_val) { + hw_dbg("Shadow RAM write EEWR timed out\n"); + break; + } + } + + return ret_val; +} + +/** + * igc_write_nvm_srwr_i225 - Write to Shadow RAM using EEWR + * @hw: pointer to the HW structure + * @offset: offset within the Shadow RAM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the Shadow RAM + * + * Writes data to Shadow RAM at offset using EEWR register. + * + * If igc_update_nvm_checksum is not called after this function , the + * data will not be committed to FLASH and also Shadow RAM will most likely + * contain an invalid checksum. + * + * If error code is returned, data and Shadow RAM may be inconsistent - buffer + * partially written. + */ +static s32 igc_write_nvm_srwr_i225(struct igc_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 status = 0; + u16 i, count; + + /* We cannot hold synchronization semaphores for too long, + * because of forceful takeover procedure. However it is more efficient + * to write in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) { + count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ? + IGC_EERD_EEWR_MAX_COUNT : (words - i); + + status = hw->nvm.ops.acquire(hw); + if (status) + break; + + status = igc_write_nvm_srwr(hw, offset, count, data + i); + hw->nvm.ops.release(hw); + if (status) + break; + } + + return status; +} + +/** + * igc_validate_nvm_checksum_i225 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + */ +static s32 igc_validate_nvm_checksum_i225(struct igc_hw *hw) +{ + s32 (*read_op_ptr)(struct igc_hw *hw, u16 offset, u16 count, + u16 *data); + s32 status = 0; + + status = hw->nvm.ops.acquire(hw); + if (status) + goto out; + + /* Replace the read function with semaphore grabbing with + * the one that skips this for a while. + * We have semaphore taken already here. + */ + read_op_ptr = hw->nvm.ops.read; + hw->nvm.ops.read = igc_read_nvm_eerd; + + status = igc_validate_nvm_checksum(hw); + + /* Revert original read operation. */ + hw->nvm.ops.read = read_op_ptr; + + hw->nvm.ops.release(hw); + +out: + return status; +} + +/** + * igc_pool_flash_update_done_i225 - Pool FLUDONE status + * @hw: pointer to the HW structure + */ +static s32 igc_pool_flash_update_done_i225(struct igc_hw *hw) +{ + s32 ret_val = -IGC_ERR_NVM; + u32 i, reg; + + for (i = 0; i < IGC_FLUDONE_ATTEMPTS; i++) { + reg = rd32(IGC_EECD); + if (reg & IGC_EECD_FLUDONE_I225) { + ret_val = 0; + break; + } + udelay(5); + } + + return ret_val; +} + +/** + * igc_update_flash_i225 - Commit EEPROM to the flash + * @hw: pointer to the HW structure + */ +static s32 igc_update_flash_i225(struct igc_hw *hw) +{ + s32 ret_val = 0; + u32 flup; + + ret_val = igc_pool_flash_update_done_i225(hw); + if (ret_val == -IGC_ERR_NVM) { + hw_dbg("Flash update time out\n"); + goto out; + } + + flup = rd32(IGC_EECD) | IGC_EECD_FLUPD_I225; + wr32(IGC_EECD, flup); + + ret_val = igc_pool_flash_update_done_i225(hw); + if (ret_val) + hw_dbg("Flash update time out\n"); + else + hw_dbg("Flash update complete\n"); + +out: + return ret_val; +} + +/** + * igc_update_nvm_checksum_i225 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. Next commit EEPROM data onto the Flash. + */ +static s32 igc_update_nvm_checksum_i225(struct igc_hw *hw) +{ + u16 checksum = 0; + s32 ret_val = 0; + u16 i, nvm_data; + + /* Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + ret_val = igc_read_nvm_eerd(hw, 0, 1, &nvm_data); + if (ret_val) { + hw_dbg("EEPROM read failed\n"); + goto out; + } + + ret_val = hw->nvm.ops.acquire(hw); + if (ret_val) + goto out; + + /* Do not use hw->nvm.ops.write, hw->nvm.ops.read + * because we do not want to take the synchronization + * semaphores twice here. + */ + + for (i = 0; i < NVM_CHECKSUM_REG; i++) { + ret_val = igc_read_nvm_eerd(hw, i, 1, &nvm_data); + if (ret_val) { + hw->nvm.ops.release(hw); + hw_dbg("NVM Read Error while updating checksum.\n"); + goto out; + } + checksum += nvm_data; + } + checksum = (u16)NVM_SUM - checksum; + ret_val = igc_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1, + &checksum); + if (ret_val) { + hw->nvm.ops.release(hw); + hw_dbg("NVM Write Error while updating checksum.\n"); + goto out; + } + + hw->nvm.ops.release(hw); + + ret_val = igc_update_flash_i225(hw); + +out: + return ret_val; +} + +/** + * igc_get_flash_presence_i225 - Check if flash device is detected + * @hw: pointer to the HW structure + */ +bool igc_get_flash_presence_i225(struct igc_hw *hw) +{ + bool ret_val = false; + u32 eec = 0; + + eec = rd32(IGC_EECD); + if (eec & IGC_EECD_FLASH_DETECTED_I225) + ret_val = true; + + return ret_val; +} + +/** + * igc_init_nvm_params_i225 - Init NVM func ptrs. + * @hw: pointer to the HW structure + */ +s32 igc_init_nvm_params_i225(struct igc_hw *hw) +{ + struct igc_nvm_info *nvm = &hw->nvm; + + nvm->ops.acquire = igc_acquire_nvm_i225; + nvm->ops.release = igc_release_nvm_i225; + + /* NVM Function Pointers */ + if (igc_get_flash_presence_i225(hw)) { + nvm->ops.read = igc_read_nvm_srrd_i225; + nvm->ops.write = igc_write_nvm_srwr_i225; + nvm->ops.validate = igc_validate_nvm_checksum_i225; + nvm->ops.update = igc_update_nvm_checksum_i225; + } else { + nvm->ops.read = igc_read_nvm_eerd; + nvm->ops.write = NULL; + nvm->ops.validate = NULL; + nvm->ops.update = NULL; + } + return 0; +} + +/** + * igc_set_eee_i225 - Enable/disable EEE support + * @hw: pointer to the HW structure + * @adv2p5G: boolean flag enabling 2.5G EEE advertisement + * @adv1G: boolean flag enabling 1G EEE advertisement + * @adv100M: boolean flag enabling 100M EEE advertisement + * + * Enable/disable EEE based on setting in dev_spec structure. + **/ +s32 igc_set_eee_i225(struct igc_hw *hw, bool adv2p5G, bool adv1G, + bool adv100M) +{ + u32 ipcnfg, eeer; + + ipcnfg = rd32(IGC_IPCNFG); + eeer = rd32(IGC_EEER); + + /* enable or disable per user setting */ + if (hw->dev_spec._base.eee_enable) { + u32 eee_su = rd32(IGC_EEE_SU); + + if (adv100M) + ipcnfg |= IGC_IPCNFG_EEE_100M_AN; + else + ipcnfg &= ~IGC_IPCNFG_EEE_100M_AN; + + if (adv1G) + ipcnfg |= IGC_IPCNFG_EEE_1G_AN; + else + ipcnfg &= ~IGC_IPCNFG_EEE_1G_AN; + + if (adv2p5G) + ipcnfg |= IGC_IPCNFG_EEE_2_5G_AN; + else + ipcnfg &= ~IGC_IPCNFG_EEE_2_5G_AN; + + eeer |= (IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN | + IGC_EEER_LPI_FC); + + /* This bit should not be set in normal operation. */ + if (eee_su & IGC_EEE_SU_LPI_CLK_STP) + hw_dbg("LPI Clock Stop Bit should not be set!\n"); + } else { + ipcnfg &= ~(IGC_IPCNFG_EEE_2_5G_AN | IGC_IPCNFG_EEE_1G_AN | + IGC_IPCNFG_EEE_100M_AN); + eeer &= ~(IGC_EEER_TX_LPI_EN | IGC_EEER_RX_LPI_EN | + IGC_EEER_LPI_FC); + } + wr32(IGC_IPCNFG, ipcnfg); + wr32(IGC_EEER, eeer); + rd32(IGC_IPCNFG); + rd32(IGC_EEER); + + return IGC_SUCCESS; +} + +/* igc_set_ltr_i225 - Set Latency Tolerance Reporting thresholds + * @hw: pointer to the HW structure + * @link: bool indicating link status + * + * Set the LTR thresholds based on the link speed (Mbps), EEE, and DMAC + * settings, otherwise specify that there is no LTR requirement. + */ +s32 igc_set_ltr_i225(struct igc_hw *hw, bool link) +{ + u32 tw_system, ltrc, ltrv, ltr_min, ltr_max, scale_min, scale_max; + u16 speed, duplex; + s32 size; + + /* If we do not have link, LTR thresholds are zero. */ + if (link) { + hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex); + + /* Check if using copper interface with EEE enabled or if the + * link speed is 10 Mbps. + */ + if (hw->dev_spec._base.eee_enable && + speed != SPEED_10) { + /* EEE enabled, so send LTRMAX threshold. */ + ltrc = rd32(IGC_LTRC) | + IGC_LTRC_EEEMS_EN; + wr32(IGC_LTRC, ltrc); + + /* Calculate tw_system (nsec). */ + if (speed == SPEED_100) { + tw_system = ((rd32(IGC_EEE_SU) & + IGC_TW_SYSTEM_100_MASK) >> + IGC_TW_SYSTEM_100_SHIFT) * 500; + } else { + tw_system = (rd32(IGC_EEE_SU) & + IGC_TW_SYSTEM_1000_MASK) * 500; + } + } else { + tw_system = 0; + } + + /* Get the Rx packet buffer size. */ + size = rd32(IGC_RXPBS) & + IGC_RXPBS_SIZE_I225_MASK; + + /* Calculations vary based on DMAC settings. */ + if (rd32(IGC_DMACR) & IGC_DMACR_DMAC_EN) { + size -= (rd32(IGC_DMACR) & + IGC_DMACR_DMACTHR_MASK) >> + IGC_DMACR_DMACTHR_SHIFT; + /* Convert size to bits. */ + size *= 1024 * 8; + } else { + /* Convert size to bytes, subtract the MTU, and then + * convert the size to bits. + */ + size *= 1024; + size *= 8; + } + + if (size < 0) { + hw_dbg("Invalid effective Rx buffer size %d\n", + size); + return -IGC_ERR_CONFIG; + } + + /* Calculate the thresholds. Since speed is in Mbps, simplify + * the calculation by multiplying size/speed by 1000 for result + * to be in nsec before dividing by the scale in nsec. Set the + * scale such that the LTR threshold fits in the register. + */ + ltr_min = (1000 * size) / speed; + ltr_max = ltr_min + tw_system; + scale_min = (ltr_min / 1024) < 1024 ? IGC_LTRMINV_SCALE_1024 : + IGC_LTRMINV_SCALE_32768; + scale_max = (ltr_max / 1024) < 1024 ? IGC_LTRMAXV_SCALE_1024 : + IGC_LTRMAXV_SCALE_32768; + ltr_min /= scale_min == IGC_LTRMINV_SCALE_1024 ? 1024 : 32768; + ltr_min -= 1; + ltr_max /= scale_max == IGC_LTRMAXV_SCALE_1024 ? 1024 : 32768; + ltr_max -= 1; + + /* Only write the LTR thresholds if they differ from before. */ + ltrv = rd32(IGC_LTRMINV); + if (ltr_min != (ltrv & IGC_LTRMINV_LTRV_MASK)) { + ltrv = IGC_LTRMINV_LSNP_REQ | ltr_min | + (scale_min << IGC_LTRMINV_SCALE_SHIFT); + wr32(IGC_LTRMINV, ltrv); + } + + ltrv = rd32(IGC_LTRMAXV); + if (ltr_max != (ltrv & IGC_LTRMAXV_LTRV_MASK)) { + ltrv = IGC_LTRMAXV_LSNP_REQ | ltr_max | + (scale_max << IGC_LTRMAXV_SCALE_SHIFT); + wr32(IGC_LTRMAXV, ltrv); + } + } + + return IGC_SUCCESS; +} |