summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c149
1 files changed, 77 insertions, 72 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index aa4bf6c9a..cdc912bba 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -206,13 +206,13 @@ static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw)
}
if (retry == IXGBE_CS4227_RETRIES) {
hw_err(hw, "CS4227 reset did not complete\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value);
if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) {
hw_err(hw, "CS4227 EEPROM did not load successfully\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
return 0;
@@ -350,13 +350,13 @@ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data)
{
- return IXGBE_NOT_IMPLEMENTED;
+ return -EOPNOTSUPP;
}
static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data)
{
- return IXGBE_NOT_IMPLEMENTED;
+ return -EOPNOTSUPP;
}
/**
@@ -463,7 +463,7 @@ s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity,
--retries;
} while (retries > 0);
- return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ return -EIO;
}
static const struct {
@@ -511,7 +511,7 @@ static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw)
hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK;
hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK;
if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK)
- return IXGBE_ERR_PHY_ADDR_INVALID;
+ return -EFAULT;
hw->phy.autoneg_advertised = hw->phy.speeds_supported;
hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL |
@@ -568,7 +568,7 @@ static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw)
if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
hw_err(hw, "rx_pause not valid in strict IEEE mode\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ return -EINVAL;
}
switch (hw->fc.requested_mode) {
@@ -600,8 +600,10 @@ static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw)
rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup);
if (rc)
return rc;
+
if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN)
- return IXGBE_ERR_OVERTEMP;
+ return -EIO;
+
return 0;
}
@@ -675,7 +677,7 @@ static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl)
*ctrl = command;
if (i == IXGBE_MDIO_COMMAND_TIMEOUT) {
hw_dbg(hw, "IOSF wait timed out\n");
- return IXGBE_ERR_PHY;
+ return -EIO;
}
return 0;
@@ -715,7 +717,8 @@ static s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
hw_dbg(hw, "Failed to read, error %x\n", error);
- return IXGBE_ERR_PHY;
+ ret = -EIO;
+ goto out;
}
if (!ret)
@@ -750,9 +753,9 @@ static s32 ixgbe_get_phy_token(struct ixgbe_hw *hw)
if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
return 0;
if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY)
- return IXGBE_ERR_FW_RESP_INVALID;
+ return -EIO;
- return IXGBE_ERR_TOKEN_RETRY;
+ return -EAGAIN;
}
/**
@@ -778,7 +781,7 @@ static s32 ixgbe_put_phy_token(struct ixgbe_hw *hw)
return status;
if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK)
return 0;
- return IXGBE_ERR_FW_RESP_INVALID;
+ return -EIO;
}
/**
@@ -942,7 +945,7 @@ static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
local_buffer = buf;
} else {
if (buffer_size < ptr)
- return IXGBE_ERR_PARAM;
+ return -EINVAL;
local_buffer = &buffer[ptr];
}
@@ -960,7 +963,7 @@ static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr,
}
if (buffer && ((u32)start + (u32)length > buffer_size))
- return IXGBE_ERR_PARAM;
+ return -EINVAL;
for (i = start; length; i++, length--) {
if (i == bufsz && !buffer) {
@@ -1012,7 +1015,7 @@ static s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer,
local_buffer = eeprom_ptrs;
} else {
if (buffer_size < IXGBE_EEPROM_LAST_WORD)
- return IXGBE_ERR_PARAM;
+ return -EINVAL;
local_buffer = buffer;
}
@@ -1148,7 +1151,7 @@ static s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw,
* calculated checksum
*/
if (read_checksum != checksum) {
- status = IXGBE_ERR_EEPROM_CHECKSUM;
+ status = -EIO;
hw_dbg(hw, "Invalid EEPROM checksum");
}
@@ -1203,7 +1206,7 @@ static s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 data)
hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
} else {
hw_dbg(hw, "write ee hostif failed to get semaphore");
- status = IXGBE_ERR_SWFW_SYNC;
+ status = -EBUSY;
}
return status;
@@ -1415,7 +1418,7 @@ static s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr,
error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >>
IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT;
hw_dbg(hw, "Failed to write, error %x\n", error);
- return IXGBE_ERR_PHY;
+ return -EIO;
}
out:
@@ -1558,7 +1561,7 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
/* iXFI is only supported with X552 */
if (mac->type != ixgbe_mac_X550EM_x)
- return IXGBE_ERR_LINK_SETUP;
+ return -EIO;
/* Disable AN and force speed to 10G Serial. */
status = ixgbe_read_iosf_sb_reg_x550(hw,
@@ -1580,7 +1583,7 @@ static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
break;
default:
/* Other link speeds are not supported by internal KR PHY. */
- return IXGBE_ERR_LINK_SETUP;
+ return -EINVAL;
}
status = ixgbe_write_iosf_sb_reg_x550(hw,
@@ -1611,7 +1614,7 @@ static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
{
switch (hw->phy.sfp_type) {
case ixgbe_sfp_type_not_present:
- return IXGBE_ERR_SFP_NOT_PRESENT;
+ return -ENOENT;
case ixgbe_sfp_type_da_cu_core0:
case ixgbe_sfp_type_da_cu_core1:
*linear = true;
@@ -1630,7 +1633,7 @@ static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear)
case ixgbe_sfp_type_1g_cu_core0:
case ixgbe_sfp_type_1g_cu_core1:
default:
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ return -EOPNOTSUPP;
}
return 0;
@@ -1660,7 +1663,7 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
* there is no reason to configure CS4227 and SFP not present error is
* not accepted in the setup MAC link flow.
*/
- if (status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status == -ENOENT)
return 0;
if (status)
@@ -1718,7 +1721,7 @@ static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed)
break;
default:
/* Other link speeds are not supported by internal PHY. */
- return IXGBE_ERR_LINK_SETUP;
+ return -EINVAL;
}
(void)mac->ops.write_iosf_sb_reg(hw,
@@ -1803,7 +1806,7 @@ ixgbe_setup_mac_link_sfp_n(struct ixgbe_hw *hw, ixgbe_link_speed speed,
/* If no SFP module present, then return success. Return success since
* SFP not present error is not excepted in the setup MAC link flow.
*/
- if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (ret_val == -ENOENT)
return 0;
if (ret_val)
@@ -1853,7 +1856,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
/* If no SFP module present, then return success. Return success since
* SFP not present error is not excepted in the setup MAC link flow.
*/
- if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (ret_val == -ENOENT)
return 0;
if (ret_val)
@@ -1863,7 +1866,7 @@ ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, ixgbe_link_speed speed,
ixgbe_setup_kr_speed_x550em(hw, speed);
if (hw->phy.mdio.prtad == MDIO_PRTAD_NONE)
- return IXGBE_ERR_PHY_ADDR_INVALID;
+ return -EFAULT;
/* Get external PHY SKU id */
ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU,
@@ -1962,7 +1965,7 @@ static s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw,
u16 i, autoneg_status;
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
- return IXGBE_ERR_CONFIG;
+ return -EIO;
status = ixgbe_check_mac_link_generic(hw, speed, link_up,
link_up_wait_to_complete);
@@ -2145,9 +2148,9 @@ static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed,
*/
static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
{
- s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 };
ixgbe_link_speed speed;
+ s32 status = -EIO;
bool link_up;
/* AN should have completed when the cable was plugged in.
@@ -2165,7 +2168,7 @@ static void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw)
/* Check if auto-negotiation has completed */
status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info);
if (status || !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) {
- status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ status = -EIO;
goto out;
}
@@ -2369,18 +2372,18 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw,
* @hw: pointer to hardware structure
* @lsc: pointer to boolean flag which indicates whether external Base T
* PHY interrupt is lsc
+ * @is_overtemp: indicate whether an overtemp event encountered
*
* Determime if external Base T PHY interrupt cause is high temperature
* failure alarm or link status change.
- *
- * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
- * failure alarm, else return PHY access status.
**/
-static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
+static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc,
+ bool *is_overtemp)
{
u32 status;
u16 reg;
+ *is_overtemp = false;
*lsc = false;
/* Vendor alarm triggered */
@@ -2412,7 +2415,8 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) {
/* power down the PHY in case the PHY FW didn't already */
ixgbe_set_copper_phy_power(hw, false);
- return IXGBE_ERR_OVERTEMP;
+ *is_overtemp = true;
+ return -EIO;
}
if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) {
/* device fault alarm triggered */
@@ -2426,7 +2430,8 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) {
/* power down the PHY in case the PHY FW didn't */
ixgbe_set_copper_phy_power(hw, false);
- return IXGBE_ERR_OVERTEMP;
+ *is_overtemp = true;
+ return -EIO;
}
}
@@ -2462,12 +2467,12 @@ static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc)
**/
static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
{
+ bool lsc, overtemp;
u32 status;
u16 reg;
- bool lsc;
/* Clear interrupt flags */
- status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, &overtemp);
/* Enable link status change alarm */
@@ -2546,21 +2551,20 @@ static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw)
/**
* ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt
* @hw: pointer to hardware structure
+ * @is_overtemp: indicate whether an overtemp event encountered
*
* Handle external Base T PHY interrupt. If high temperature
* failure alarm then return error, else if link status change
* then setup internal/external PHY link
- *
- * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature
- * failure alarm, else return PHY access status.
**/
-static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw)
+static s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw,
+ bool *is_overtemp)
{
struct ixgbe_phy_info *phy = &hw->phy;
bool lsc;
u32 status;
- status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc);
+ status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc, is_overtemp);
if (status)
return status;
@@ -2692,7 +2696,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
u16 speed;
if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
- return IXGBE_ERR_CONFIG;
+ return -EIO;
if (!(hw->mac.type == ixgbe_mac_X550EM_x &&
!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))) {
@@ -2735,7 +2739,7 @@ static s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
break;
default:
/* Internal PHY does not support anything else */
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ return -EINVAL;
}
return ixgbe_setup_ixfi_x550em(hw, &force_speed);
@@ -2767,7 +2771,7 @@ static s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
u16 phy_data;
if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
- return IXGBE_ERR_PARAM;
+ return -EINVAL;
/* To turn on the LED, set mode to ON. */
hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
@@ -2789,7 +2793,7 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
u16 phy_data;
if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
- return IXGBE_ERR_PARAM;
+ return -EINVAL;
/* To turn on the LED, set mode to ON. */
hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
@@ -2813,8 +2817,9 @@ static s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
*
* Sends driver version number to firmware through the manageability
* block. On success return 0
- * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
- * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ * else returns -EBUSY when encountering an error acquiring
+ * semaphore, -EIO when command fails or -ENIVAL when incorrect
+ * params passed.
**/
static s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
u8 build, u8 sub, u16 len,
@@ -2825,7 +2830,7 @@ static s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
int i;
if (!len || !driver_ver || (len > sizeof(fw_cmd.driver_string)))
- return IXGBE_ERR_INVALID_ARGUMENT;
+ return -EINVAL;
fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len;
@@ -2850,7 +2855,7 @@ static s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min,
if (fw_cmd.hdr.cmd_or_resp.ret_status !=
FW_CEM_RESP_STATUS_SUCCESS)
- return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ return -EIO;
return 0;
}
@@ -2907,7 +2912,7 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
/* Validate the requested mode */
if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ return -EINVAL;
}
/* 10gig parts do not have a word in the EEPROM to determine the
@@ -2942,7 +2947,7 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
break;
default:
hw_err(hw, "Flow control param set incorrectly\n");
- return IXGBE_ERR_CONFIG;
+ return -EIO;
}
switch (hw->device_id) {
@@ -2986,8 +2991,8 @@ static s32 ixgbe_setup_fc_x550em(struct ixgbe_hw *hw)
static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
{
u32 link_s1, lp_an_page_low, an_cntl_1;
- s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED;
ixgbe_link_speed speed;
+ s32 status = -EIO;
bool link_up;
/* AN should have completed when the cable was plugged in.
@@ -3013,7 +3018,7 @@ static void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw)
if (status || (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) {
hw_dbg(hw, "Auto-Negotiation did not complete\n");
- status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ status = -EIO;
goto out;
}
@@ -3187,21 +3192,23 @@ static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw)
/**
* ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp
* @hw: pointer to hardware structure
+ *
+ * Return true when an overtemp event detected, otherwise false.
*/
-static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
+static bool ixgbe_check_overtemp_fw(struct ixgbe_hw *hw)
{
u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 };
s32 rc;
rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store);
if (rc)
- return rc;
+ return false;
if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) {
ixgbe_shutdown_fw_phy(hw);
- return IXGBE_ERR_OVERTEMP;
+ return true;
}
- return 0;
+ return false;
}
/**
@@ -3251,8 +3258,7 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
/* Identify the PHY or SFP module */
ret_val = phy->ops.identify(hw);
- if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED ||
- ret_val == IXGBE_ERR_PHY_ADDR_INVALID)
+ if (ret_val == -EOPNOTSUPP || ret_val == -EFAULT)
return ret_val;
/* Setup function pointers based on detected hardware */
@@ -3460,8 +3466,7 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
/* PHY ops must be identified and initialized prior to reset */
status = hw->phy.ops.init(hw);
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED ||
- status == IXGBE_ERR_PHY_ADDR_INVALID)
+ if (status == -EOPNOTSUPP || status == -EFAULT)
return status;
/* start the external PHY */
@@ -3477,7 +3482,7 @@ static s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw)
hw->phy.sfp_setup_needed = false;
}
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ if (status == -EOPNOTSUPP)
return status;
/* Reset PHY */
@@ -3501,7 +3506,7 @@ mac_reset_top:
status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
if (status) {
hw_dbg(hw, "semaphore failed with %d", status);
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
}
ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
@@ -3519,7 +3524,7 @@ mac_reset_top:
}
if (ctrl & IXGBE_CTRL_RST_MASK) {
- status = IXGBE_ERR_RESET_FAILED;
+ status = -EIO;
hw_dbg(hw, "Reset polling failed to complete.\n");
}
@@ -3615,7 +3620,7 @@ static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
/* Validate the requested mode */
if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
hw_err(hw, "ixgbe_fc_rx_pause not valid in strict IEEE mode\n");
- return IXGBE_ERR_INVALID_LINK_SETTINGS;
+ return -EINVAL;
}
if (hw->fc.requested_mode == ixgbe_fc_default)
@@ -3672,7 +3677,7 @@ static s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw)
break;
default:
hw_err(hw, "Flow control param set incorrectly\n");
- return IXGBE_ERR_CONFIG;
+ return -EIO;
}
status = hw->mac.ops.write_iosf_sb_reg(hw,
@@ -3768,7 +3773,7 @@ static s32 ixgbe_acquire_swfw_sync_x550em_a(struct ixgbe_hw *hw, u32 mask)
return 0;
if (hmask)
ixgbe_release_swfw_sync_X540(hw, hmask);
- if (status != IXGBE_ERR_TOKEN_RETRY)
+ if (status != -EAGAIN)
return status;
msleep(FW_PHY_TOKEN_DELAY);
}
@@ -3812,7 +3817,7 @@ static s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data);
@@ -3838,7 +3843,7 @@ static s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
s32 status;
if (hw->mac.ops.acquire_swfw_sync(hw, mask))
- return IXGBE_ERR_SWFW_SYNC;
+ return -EBUSY;
status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type, phy_data);
hw->mac.ops.release_swfw_sync(hw, mask);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 00:02:08 +0000