diff options
Diffstat (limited to 'drivers/net/ethernet/ti/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/ti/Kconfig | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig new file mode 100644 index 000000000..fce06663e --- /dev/null +++ b/drivers/net/ethernet/ti/Kconfig @@ -0,0 +1,186 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# TI device configuration +# + +config NET_VENDOR_TI + bool "Texas Instruments (TI) devices" + default y + depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about TI devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_TI + +config TI_DAVINCI_EMAC + tristate "TI DaVinci EMAC Support" + depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 ) || COMPILE_TEST + select TI_DAVINCI_MDIO + select PHYLIB + select GENERIC_ALLOCATOR + help + This driver supports TI's DaVinci Ethernet . + + To compile this driver as a module, choose M here: the module + will be called davinci_emac_driver. This is recommended. + +config TI_DAVINCI_MDIO + tristate "TI DaVinci MDIO Support" + depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + select PHYLIB + select MDIO_BITBANG + help + This driver supports TI's DaVinci MDIO module. + + To compile this driver as a module, choose M here: the module + will be called davinci_mdio. This is recommended. + +config TI_CPSW_PHY_SEL + bool "TI CPSW Phy mode Selection (DEPRECATED)" + default n + help + This driver supports configuring of the phy mode connected to + the CPSW. DEPRECATED: use PHY_TI_GMII_SEL. + +config TI_CPSW + tristate "TI CPSW Switch Support" + depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST + depends on TI_CPTS || !TI_CPTS + select TI_DAVINCI_MDIO + select MFD_SYSCON + select PAGE_POOL + select REGMAP + imply PHY_TI_GMII_SEL + help + This driver supports TI's CPSW Ethernet Switch. + + To compile this driver as a module, choose M here: the module + will be called cpsw. + +config TI_CPSW_SWITCHDEV + tristate "TI CPSW Switch Support with switchdev" + depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST + depends on NET_SWITCHDEV + depends on TI_CPTS || !TI_CPTS + select PAGE_POOL + select TI_DAVINCI_MDIO + select MFD_SYSCON + select REGMAP + select NET_DEVLINK + imply PHY_TI_GMII_SEL + help + This driver supports TI's CPSW Ethernet Switch. + + To compile this driver as a module, choose M here: the module + will be called cpsw_new. + +config TI_CPTS + tristate "TI Common Platform Time Sync (CPTS) Support" + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST + depends on COMMON_CLK + depends on PTP_1588_CLOCK + help + This driver supports the Common Platform Time Sync unit of + the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem. + The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the + driver offers a PTP Hardware Clock. + +config TI_K3_AM65_CPSW_NUSS + tristate "TI K3 AM654x/J721E CPSW Ethernet driver" + depends on ARCH_K3 && OF && TI_K3_UDMA_GLUE_LAYER + select NET_DEVLINK + select TI_DAVINCI_MDIO + select PHYLINK + imply PHY_TI_GMII_SEL + depends on TI_K3_AM65_CPTS || !TI_K3_AM65_CPTS + help + This driver supports TI K3 AM654/J721E CPSW2G Ethernet SubSystem. + The two-port Gigabit Ethernet MAC (MCU_CPSW0) subsystem provides + Ethernet packet communication for the device: One Ethernet port + (port 1) with selectable RGMII and RMII interfaces and an internal + Communications Port Programming Interface (CPPI) port (port 0). + + To compile this driver as a module, choose M here: the module + will be called ti-am65-cpsw-nuss. + +config TI_K3_AM65_CPSW_SWITCHDEV + bool "TI K3 AM654x/J721E CPSW Switch mode support" + depends on TI_K3_AM65_CPSW_NUSS + depends on NET_SWITCHDEV + help + This enables switchdev support for TI K3 CPSWxG Ethernet + Switch. Enable this driver to support hardware switch support for AM65 + CPSW NUSS driver. + +config TI_K3_AM65_CPTS + tristate "TI K3 AM65x CPTS" + depends on ARCH_K3 && OF + depends on PTP_1588_CLOCK + help + Say y here to support the TI K3 AM65x CPTS with 1588 features such as + PTP hardware clock for each CPTS device and network packets + timestamping where applicable. + Depending on integration CPTS blocks enable compliance with + the IEEE 1588-2008 standard for a precision clock synchronization + protocol, Ethernet Enhanced Scheduled Traffic Operations (CPTS_ESTFn) + and PCIe Subsystem Precision Time Measurement (PTM). + +config TI_AM65_CPSW_TAS + bool "Enable TAS offload in AM65 CPSW" + depends on TI_K3_AM65_CPSW_NUSS && NET_SCH_TAPRIO && TI_K3_AM65_CPTS + help + Say y here to support Time Aware Shaper(TAS) offload in AM65 CPSW. + AM65 CPSW hardware supports Enhanced Scheduled Traffic (EST) + defined in IEEE 802.1Q 2018. The EST scheduler runs on CPTS and the + TAS/EST schedule is updated in the Fetch RAM memory of the CPSW. + +config TI_KEYSTONE_NETCP + tristate "TI Keystone NETCP Core Support" + select TI_DAVINCI_MDIO + depends on OF + depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS + depends on TI_CPTS || !TI_CPTS + help + This driver supports TI's Keystone NETCP Core. + + To compile this driver as a module, choose M here: the module + will be called keystone_netcp. + +config TI_KEYSTONE_NETCP_ETHSS + depends on TI_KEYSTONE_NETCP + tristate "TI Keystone NETCP Ethernet subsystem Support" + help + + To compile this driver as a module, choose M here: the module + will be called keystone_netcp_ethss. + +config TLAN + tristate "TI ThunderLAN support" + depends on (PCI || EISA) + help + If you have a PCI Ethernet network card based on the ThunderLAN chip + which is supported by this driver, say Y here. + + Devices currently supported by this driver are Compaq Netelligent, + Compaq NetFlex and Olicom cards. Please read the file + <file:Documentation/networking/device_drivers/ethernet/ti/tlan.rst> + for more details. + + To compile this driver as a module, choose M here. The module + will be called tlan. + + Please email feedback to <torben.mathiasen@compaq.com>. + +config CPMAC + tristate "TI AR7 CPMAC Ethernet support" + depends on AR7 + select PHYLIB + help + TI AR7 CPMAC Ethernet support + +endif # NET_VENDOR_TI |