summaryrefslogtreecommitdiffstats
path: root/drivers/net/phy/vitesse.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/phy/vitesse.c')
-rw-r--r--drivers/net/phy/vitesse.c522
1 files changed, 522 insertions, 0 deletions
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
new file mode 100644
index 000000000..897b979ec
--- /dev/null
+++ b/drivers/net/phy/vitesse.c
@@ -0,0 +1,522 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Vitesse PHYs
+ *
+ * Author: Kriston Carson
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+/* Vitesse Extended Page Magic Register(s) */
+#define MII_VSC82X4_EXT_PAGE_16E 0x10
+#define MII_VSC82X4_EXT_PAGE_17E 0x11
+#define MII_VSC82X4_EXT_PAGE_18E 0x12
+
+/* Vitesse Extended Control Register 1 */
+#define MII_VSC8244_EXT_CON1 0x17
+#define MII_VSC8244_EXTCON1_INIT 0x0000
+#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
+#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
+#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
+#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
+
+/* Vitesse Interrupt Mask Register */
+#define MII_VSC8244_IMASK 0x19
+#define MII_VSC8244_IMASK_IEN 0x8000
+#define MII_VSC8244_IMASK_SPEED 0x4000
+#define MII_VSC8244_IMASK_LINK 0x2000
+#define MII_VSC8244_IMASK_DUPLEX 0x1000
+#define MII_VSC8244_IMASK_MASK 0xf000
+
+#define MII_VSC8221_IMASK_MASK 0xa000
+
+/* Vitesse Interrupt Status Register */
+#define MII_VSC8244_ISTAT 0x1a
+#define MII_VSC8244_ISTAT_STATUS 0x8000
+#define MII_VSC8244_ISTAT_SPEED 0x4000
+#define MII_VSC8244_ISTAT_LINK 0x2000
+#define MII_VSC8244_ISTAT_DUPLEX 0x1000
+#define MII_VSC8244_ISTAT_MASK (MII_VSC8244_ISTAT_SPEED | \
+ MII_VSC8244_ISTAT_LINK | \
+ MII_VSC8244_ISTAT_DUPLEX)
+
+#define MII_VSC8221_ISTAT_MASK MII_VSC8244_ISTAT_LINK
+
+/* Vitesse Auxiliary Control/Status Register */
+#define MII_VSC8244_AUX_CONSTAT 0x1c
+#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
+#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
+#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
+#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
+#define MII_VSC8244_AUXCONSTAT_100 0x0008
+
+#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
+#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
+
+/* Vitesse Extended Page Access Register */
+#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
+
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MII_VSC8601_EPHY_CTL 0x17
+#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8)
+
+#define PHY_ID_VSC8234 0x000fc620
+#define PHY_ID_VSC8244 0x000fc6c0
+#define PHY_ID_VSC8572 0x000704d0
+#define PHY_ID_VSC8601 0x00070420
+#define PHY_ID_VSC7385 0x00070450
+#define PHY_ID_VSC7388 0x00070480
+#define PHY_ID_VSC7395 0x00070550
+#define PHY_ID_VSC7398 0x00070580
+#define PHY_ID_VSC8662 0x00070660
+#define PHY_ID_VSC8221 0x000fc550
+#define PHY_ID_VSC8211 0x000fc4b0
+
+MODULE_DESCRIPTION("Vitesse PHY driver");
+MODULE_AUTHOR("Kriston Carson");
+MODULE_LICENSE("GPL");
+
+static int vsc824x_add_skew(struct phy_device *phydev)
+{
+ int err;
+ int extcon;
+
+ extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
+
+ if (extcon < 0)
+ return extcon;
+
+ extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
+ MII_VSC8244_EXTCON1_RX_SKEW_MASK);
+
+ extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
+ MII_VSC8244_EXTCON1_RX_SKEW);
+
+ err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
+
+ return err;
+}
+
+static int vsc824x_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8244_AUXCONSTAT_INIT);
+ if (err < 0)
+ return err;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ err = vsc824x_add_skew(phydev);
+
+ return err;
+}
+
+#define VSC73XX_EXT_PAGE_ACCESS 0x1f
+
+static int vsc73xx_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, VSC73XX_EXT_PAGE_ACCESS);
+}
+
+static int vsc73xx_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, VSC73XX_EXT_PAGE_ACCESS, page);
+}
+
+static void vsc73xx_config_init(struct phy_device *phydev)
+{
+ /* Receiver init */
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x0c, 0x0300, 0x0200);
+ phy_write(phydev, 0x1f, 0x0000);
+
+ /* Config LEDs 0x61 */
+ phy_modify(phydev, MII_TPISTATUS, 0xff00, 0x0061);
+}
+
+static int vsc738x_config_init(struct phy_device *phydev)
+{
+ u16 rev;
+ /* This magic sequence appear in the application note
+ * "VSC7385/7388 PHY Configuration".
+ *
+ * Maybe one day we will get to know what it all means.
+ */
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0200);
+ phy_write(phydev, 0x1f, 0x52b5);
+ phy_write(phydev, 0x10, 0xb68a);
+ phy_modify(phydev, 0x12, 0xff07, 0x0003);
+ phy_modify(phydev, 0x11, 0x00ff, 0x00a2);
+ phy_write(phydev, 0x10, 0x968a);
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0000);
+ phy_write(phydev, 0x1f, 0x0000);
+
+ /* Read revision */
+ rev = phy_read(phydev, MII_PHYSID2);
+ rev &= 0x0f;
+
+ /* Special quirk for revision 0 */
+ if (rev == 0) {
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0200);
+ phy_write(phydev, 0x1f, 0x52b5);
+ phy_write(phydev, 0x12, 0x0000);
+ phy_write(phydev, 0x11, 0x0689);
+ phy_write(phydev, 0x10, 0x8f92);
+ phy_write(phydev, 0x1f, 0x52b5);
+ phy_write(phydev, 0x12, 0x0000);
+ phy_write(phydev, 0x11, 0x0e35);
+ phy_write(phydev, 0x10, 0x9786);
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0000);
+ phy_write(phydev, 0x17, 0xff80);
+ phy_write(phydev, 0x17, 0x0000);
+ }
+
+ phy_write(phydev, 0x1f, 0x0000);
+ phy_write(phydev, 0x12, 0x0048);
+
+ if (rev == 0) {
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_write(phydev, 0x14, 0x6600);
+ phy_write(phydev, 0x1f, 0x0000);
+ phy_write(phydev, 0x18, 0xa24e);
+ } else {
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x16, 0x0fc0, 0x0240);
+ phy_modify(phydev, 0x14, 0x6000, 0x4000);
+ /* bits 14-15 in extended register 0x14 controls DACG amplitude
+ * 6 = -8%, 2 is hardware default
+ */
+ phy_write(phydev, 0x1f, 0x0001);
+ phy_modify(phydev, 0x14, 0xe000, 0x6000);
+ phy_write(phydev, 0x1f, 0x0000);
+ }
+
+ vsc73xx_config_init(phydev);
+
+ return 0;
+}
+
+static int vsc739x_config_init(struct phy_device *phydev)
+{
+ /* This magic sequence appears in the VSC7395 SparX-G5e application
+ * note "VSC7395/VSC7398 PHY Configuration"
+ *
+ * Maybe one day we will get to know what it all means.
+ */
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0200);
+ phy_write(phydev, 0x1f, 0x52b5);
+ phy_write(phydev, 0x10, 0xb68a);
+ phy_modify(phydev, 0x12, 0xff07, 0x0003);
+ phy_modify(phydev, 0x11, 0x00ff, 0x00a2);
+ phy_write(phydev, 0x10, 0x968a);
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x08, 0x0200, 0x0000);
+ phy_write(phydev, 0x1f, 0x0000);
+
+ phy_write(phydev, 0x1f, 0x0000);
+ phy_write(phydev, 0x12, 0x0048);
+ phy_write(phydev, 0x1f, 0x2a30);
+ phy_modify(phydev, 0x16, 0x0fc0, 0x0240);
+ phy_modify(phydev, 0x14, 0x6000, 0x4000);
+ phy_write(phydev, 0x1f, 0x0001);
+ phy_modify(phydev, 0x14, 0xe000, 0x6000);
+ phy_write(phydev, 0x1f, 0x0000);
+
+ vsc73xx_config_init(phydev);
+
+ return 0;
+}
+
+static int vsc73xx_config_aneg(struct phy_device *phydev)
+{
+ /* The VSC73xx switches does not like to be instructed to
+ * do autonegotiation in any way, it prefers that you just go
+ * with the power-on/reset defaults. Writing some registers will
+ * just make autonegotiation permanently fail.
+ */
+ return 0;
+}
+
+/* This adds a skew for both TX and RX clocks, so the skew should only be
+ * applied to "rgmii-id" interfaces. It may not work as expected
+ * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
+ */
+static int vsc8601_add_skew(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_VSC8601_EPHY_CTL);
+ if (ret < 0)
+ return ret;
+
+ ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
+ return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret);
+}
+
+static int vsc8601_config_init(struct phy_device *phydev)
+{
+ int ret = 0;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ ret = vsc8601_add_skew(phydev);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int vsc82xx_config_intr(struct phy_device *phydev)
+{
+ int err;
+
+ if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+ /* Don't bother to ACK the interrupts since the 824x cannot
+ * clear the interrupts if they are disabled.
+ */
+ err = phy_write(phydev, MII_VSC8244_IMASK,
+ (phydev->drv->phy_id == PHY_ID_VSC8234 ||
+ phydev->drv->phy_id == PHY_ID_VSC8244 ||
+ phydev->drv->phy_id == PHY_ID_VSC8572 ||
+ phydev->drv->phy_id == PHY_ID_VSC8601) ?
+ MII_VSC8244_IMASK_MASK :
+ MII_VSC8221_IMASK_MASK);
+ else {
+ /* The Vitesse PHY cannot clear the interrupt
+ * once it has disabled them, so we clear them first
+ */
+ err = phy_read(phydev, MII_VSC8244_ISTAT);
+
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_VSC8244_IMASK, 0);
+ }
+
+ return err;
+}
+
+static irqreturn_t vsc82xx_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status, irq_mask;
+
+ if (phydev->drv->phy_id == PHY_ID_VSC8244 ||
+ phydev->drv->phy_id == PHY_ID_VSC8572 ||
+ phydev->drv->phy_id == PHY_ID_VSC8601)
+ irq_mask = MII_VSC8244_ISTAT_MASK;
+ else
+ irq_mask = MII_VSC8221_ISTAT_MASK;
+
+ irq_status = phy_read(phydev, MII_VSC8244_ISTAT);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & irq_mask))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
+static int vsc8221_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
+ MII_VSC8221_AUXCONSTAT_INIT);
+ return err;
+
+ /* Perhaps we should set EXT_CON1 based on the interface?
+ * Options are 802.3Z SerDes or SGMII
+ */
+}
+
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+ int ret;
+
+ if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+ return 0;
+
+ /* map extended registers set 0x10 - 0x1e */
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+ /* map standard registers set 0x10 - 0x1e */
+ if (ret >= 0)
+ ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+ else
+ phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+ return ret;
+}
+
+/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR and also start the auto
+ * MDI/MDI-X feature
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+ * writing special values in the VSC8234 extended reserved registers
+ */
+ if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+ ret = genphy_setup_forced(phydev);
+
+ if (ret < 0) /* error */
+ return ret;
+
+ return vsc82x4_config_autocross_enable(phydev);
+ }
+
+ return genphy_config_aneg(phydev);
+}
+
+/* Vitesse 82xx */
+static struct phy_driver vsc82xx_driver[] = {
+{
+ .phy_id = PHY_ID_VSC8234,
+ .name = "Vitesse VSC8234",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ .phy_id = PHY_ID_VSC8244,
+ .name = "Vitesse VSC8244",
+ .phy_id_mask = 0x000fffc0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ .phy_id = PHY_ID_VSC8572,
+ .name = "Vitesse VSC8572",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ .phy_id = PHY_ID_VSC8601,
+ .name = "Vitesse VSC8601",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc8601_config_init,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ .phy_id = PHY_ID_VSC7385,
+ .name = "Vitesse VSC7385",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = vsc738x_config_init,
+ .config_aneg = vsc73xx_config_aneg,
+ .read_page = vsc73xx_read_page,
+ .write_page = vsc73xx_write_page,
+}, {
+ .phy_id = PHY_ID_VSC7388,
+ .name = "Vitesse VSC7388",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = vsc738x_config_init,
+ .config_aneg = vsc73xx_config_aneg,
+ .read_page = vsc73xx_read_page,
+ .write_page = vsc73xx_write_page,
+}, {
+ .phy_id = PHY_ID_VSC7395,
+ .name = "Vitesse VSC7395",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = vsc739x_config_init,
+ .config_aneg = vsc73xx_config_aneg,
+ .read_page = vsc73xx_read_page,
+ .write_page = vsc73xx_write_page,
+}, {
+ .phy_id = PHY_ID_VSC7398,
+ .name = "Vitesse VSC7398",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = vsc739x_config_init,
+ .config_aneg = vsc73xx_config_aneg,
+ .read_page = vsc73xx_read_page,
+ .write_page = vsc73xx_write_page,
+}, {
+ .phy_id = PHY_ID_VSC8662,
+ .name = "Vitesse VSC8662",
+ .phy_id_mask = 0x000ffff0,
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc824x_config_init,
+ .config_aneg = &vsc82x4_config_aneg,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ /* Vitesse 8221 */
+ .phy_id = PHY_ID_VSC8221,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8221",
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc8221_config_init,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+}, {
+ /* Vitesse 8211 */
+ .phy_id = PHY_ID_VSC8211,
+ .phy_id_mask = 0x000ffff0,
+ .name = "Vitesse VSC8211",
+ /* PHY_GBIT_FEATURES */
+ .config_init = &vsc8221_config_init,
+ .config_intr = &vsc82xx_config_intr,
+ .handle_interrupt = &vsc82xx_handle_interrupt,
+} };
+
+module_phy_driver(vsc82xx_driver);
+
+static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
+ { PHY_ID_VSC8234, 0x000ffff0 },
+ { PHY_ID_VSC8244, 0x000fffc0 },
+ { PHY_ID_VSC8572, 0x000ffff0 },
+ { PHY_ID_VSC7385, 0x000ffff0 },
+ { PHY_ID_VSC7388, 0x000ffff0 },
+ { PHY_ID_VSC7395, 0x000ffff0 },
+ { PHY_ID_VSC7398, 0x000ffff0 },
+ { PHY_ID_VSC8662, 0x000ffff0 },
+ { PHY_ID_VSC8221, 0x000ffff0 },
+ { PHY_ID_VSC8211, 0x000ffff0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(mdio, vitesse_tbl);