diff options
Diffstat (limited to 'drivers/net/wireless/ralink/rt2x00/rt2x00dev.c')
| -rw-r--r-- | drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 1633 |
1 files changed, 1633 insertions, 0 deletions
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c new file mode 100644 index 000000000..9a9cfd0ce --- /dev/null +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c @@ -0,0 +1,1633 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com> + <http://rt2x00.serialmonkey.com> + + */ + +/* + Module: rt2x00lib + Abstract: rt2x00 generic device routines. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/log2.h> +#include <linux/of.h> +#include <linux/of_net.h> + +#include "rt2x00.h" +#include "rt2x00lib.h" + +/* + * Utility functions. + */ +u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev, + struct ieee80211_vif *vif) +{ + /* + * When in STA mode, bssidx is always 0 otherwise local_address[5] + * contains the bss number, see BSS_ID_MASK comments for details. + */ + if (rt2x00dev->intf_sta_count) + return 0; + return vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1); +} +EXPORT_SYMBOL_GPL(rt2x00lib_get_bssidx); + +/* + * Radio control handlers. + */ +int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev) +{ + int status; + + /* + * Don't enable the radio twice. + * And check if the hardware button has been disabled. + */ + if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return 0; + + /* + * Initialize all data queues. + */ + rt2x00queue_init_queues(rt2x00dev); + + /* + * Enable radio. + */ + status = + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON); + if (status) + return status; + + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON); + + rt2x00leds_led_radio(rt2x00dev, true); + rt2x00led_led_activity(rt2x00dev, true); + + set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags); + + /* + * Enable queues. + */ + rt2x00queue_start_queues(rt2x00dev); + rt2x00link_start_tuner(rt2x00dev); + + /* + * Start watchdog monitoring. + */ + rt2x00link_start_watchdog(rt2x00dev); + + return 0; +} + +void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) +{ + if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* + * Stop watchdog monitoring. + */ + rt2x00link_stop_watchdog(rt2x00dev); + + /* + * Stop all queues + */ + rt2x00link_stop_tuner(rt2x00dev); + rt2x00queue_stop_queues(rt2x00dev); + rt2x00queue_flush_queues(rt2x00dev, true); + + /* + * Disable radio. + */ + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF); + rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF); + rt2x00led_led_activity(rt2x00dev, false); + rt2x00leds_led_radio(rt2x00dev, false); +} + +static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = data; + struct rt2x00_intf *intf = vif_to_intf(vif); + + /* + * It is possible the radio was disabled while the work had been + * scheduled. If that happens we should return here immediately, + * note that in the spinlock protected area above the delayed_flags + * have been cleared correctly. + */ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags)) { + mutex_lock(&intf->beacon_skb_mutex); + rt2x00queue_update_beacon(rt2x00dev, vif); + mutex_unlock(&intf->beacon_skb_mutex); + } +} + +static void rt2x00lib_intf_scheduled(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, intf_work); + + /* + * Iterate over each interface and perform the + * requested configurations. + */ + ieee80211_iterate_active_interfaces(rt2x00dev->hw, + IEEE80211_IFACE_ITER_RESUME_ALL, + rt2x00lib_intf_scheduled_iter, + rt2x00dev); +} + +static void rt2x00lib_autowakeup(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, autowakeup_work.work); + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE)) + rt2x00_err(rt2x00dev, "Device failed to wakeup\n"); + clear_bit(CONFIG_POWERSAVING, &rt2x00dev->flags); +} + +/* + * Interrupt context handlers. + */ +static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct ieee80211_tx_control control = {}; + struct rt2x00_dev *rt2x00dev = data; + struct sk_buff *skb; + + /* + * Only AP mode interfaces do broad- and multicast buffering + */ + if (vif->type != NL80211_IFTYPE_AP) + return; + + /* + * Send out buffered broad- and multicast frames + */ + skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); + while (skb) { + rt2x00mac_tx(rt2x00dev->hw, &control, skb); + skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); + } +} + +static void rt2x00lib_beaconupdate_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct rt2x00_dev *rt2x00dev = data; + + if (vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_ADHOC && + vif->type != NL80211_IFTYPE_MESH_POINT) + return; + + /* + * Update the beacon without locking. This is safe on PCI devices + * as they only update the beacon periodically here. This should + * never be called for USB devices. + */ + WARN_ON(rt2x00_is_usb(rt2x00dev)); + rt2x00queue_update_beacon(rt2x00dev, vif); +} + +void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* send buffered bc/mc frames out for every bssid */ + ieee80211_iterate_active_interfaces_atomic( + rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + rt2x00lib_bc_buffer_iter, rt2x00dev); + /* + * Devices with pre tbtt interrupt don't need to update the beacon + * here as they will fetch the next beacon directly prior to + * transmission. + */ + if (rt2x00_has_cap_pre_tbtt_interrupt(rt2x00dev)) + return; + + /* fetch next beacon */ + ieee80211_iterate_active_interfaces_atomic( + rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + rt2x00lib_beaconupdate_iter, rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); + +void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev) +{ + if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + + /* fetch next beacon */ + ieee80211_iterate_active_interfaces_atomic( + rt2x00dev->hw, IEEE80211_IFACE_ITER_RESUME_ALL, + rt2x00lib_beaconupdate_iter, rt2x00dev); +} +EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt); + +void rt2x00lib_dmastart(struct queue_entry *entry) +{ + set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry, Q_INDEX); +} +EXPORT_SYMBOL_GPL(rt2x00lib_dmastart); + +void rt2x00lib_dmadone(struct queue_entry *entry) +{ + set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags); + clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags); + rt2x00queue_index_inc(entry, Q_INDEX_DMA_DONE); +} +EXPORT_SYMBOL_GPL(rt2x00lib_dmadone); + +static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_bar *bar = (void *) entry->skb->data; + struct rt2x00_bar_list_entry *bar_entry; + int ret; + + if (likely(!ieee80211_is_back_req(bar->frame_control))) + return 0; + + /* + * Unlike all other frames, the status report for BARs does + * not directly come from the hardware as it is incapable of + * matching a BA to a previously send BAR. The hardware will + * report all BARs as if they weren't acked at all. + * + * Instead the RX-path will scan for incoming BAs and set the + * block_acked flag if it sees one that was likely caused by + * a BAR from us. + * + * Remove remaining BARs here and return their status for + * TX done processing. + */ + ret = 0; + rcu_read_lock(); + list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) { + if (bar_entry->entry != entry) + continue; + + spin_lock_bh(&rt2x00dev->bar_list_lock); + /* Return whether this BAR was blockacked or not */ + ret = bar_entry->block_acked; + /* Remove the BAR from our checklist */ + list_del_rcu(&bar_entry->list); + spin_unlock_bh(&rt2x00dev->bar_list_lock); + kfree_rcu(bar_entry, head); + + break; + } + rcu_read_unlock(); + + return ret; +} + +static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev, + struct ieee80211_tx_info *tx_info, + struct skb_frame_desc *skbdesc, + struct txdone_entry_desc *txdesc, + bool success) +{ + u8 rate_idx, rate_flags, retry_rates; + int i; + + rate_idx = skbdesc->tx_rate_idx; + rate_flags = skbdesc->tx_rate_flags; + retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ? + (txdesc->retry + 1) : 1; + + /* + * Initialize TX status + */ + memset(&tx_info->status, 0, sizeof(tx_info->status)); + tx_info->status.ack_signal = 0; + + /* + * Frame was send with retries, hardware tried + * different rates to send out the frame, at each + * retry it lowered the rate 1 step except when the + * lowest rate was used. + */ + for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) { + tx_info->status.rates[i].idx = rate_idx - i; + tx_info->status.rates[i].flags = rate_flags; + + if (rate_idx - i == 0) { + /* + * The lowest rate (index 0) was used until the + * number of max retries was reached. + */ + tx_info->status.rates[i].count = retry_rates - i; + i++; + break; + } + tx_info->status.rates[i].count = 1; + } + if (i < (IEEE80211_TX_MAX_RATES - 1)) + tx_info->status.rates[i].idx = -1; /* terminate */ + + if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags)) + tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; + + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + if (success) + tx_info->flags |= IEEE80211_TX_STAT_ACK; + else + rt2x00dev->low_level_stats.dot11ACKFailureCount++; + } + + /* + * Every single frame has it's own tx status, hence report + * every frame as ampdu of size 1. + * + * TODO: if we can find out how many frames were aggregated + * by the hw we could provide the real ampdu_len to mac80211 + * which would allow the rc algorithm to better decide on + * which rates are suitable. + */ + if (test_bit(TXDONE_AMPDU, &txdesc->flags) || + tx_info->flags & IEEE80211_TX_CTL_AMPDU) { + tx_info->flags |= IEEE80211_TX_STAT_AMPDU | + IEEE80211_TX_CTL_AMPDU; + tx_info->status.ampdu_len = 1; + tx_info->status.ampdu_ack_len = success ? 1 : 0; + } + + if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) { + if (success) + rt2x00dev->low_level_stats.dot11RTSSuccessCount++; + else + rt2x00dev->low_level_stats.dot11RTSFailureCount++; + } +} + +static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev, + struct queue_entry *entry) +{ + /* + * Make this entry available for reuse. + */ + entry->skb = NULL; + entry->flags = 0; + + rt2x00dev->ops->lib->clear_entry(entry); + + rt2x00queue_index_inc(entry, Q_INDEX_DONE); + + /* + * If the data queue was below the threshold before the txdone + * handler we must make sure the packet queue in the mac80211 stack + * is reenabled when the txdone handler has finished. This has to be + * serialized with rt2x00mac_tx(), otherwise we can wake up queue + * before it was stopped. + */ + spin_lock_bh(&entry->queue->tx_lock); + if (!rt2x00queue_threshold(entry->queue)) + rt2x00queue_unpause_queue(entry->queue); + spin_unlock_bh(&entry->queue->tx_lock); +} + +void rt2x00lib_txdone_nomatch(struct queue_entry *entry, + struct txdone_entry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + struct ieee80211_tx_info txinfo = {}; + bool success; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(entry); + + /* + * Signal that the TX descriptor is no longer in the skb. + */ + skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; + + /* + * Send frame to debugfs immediately, after this call is completed + * we are going to overwrite the skb->cb array. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); + + /* + * Determine if the frame has been successfully transmitted and + * remove BARs from our check list while checking for their + * TX status. + */ + success = + rt2x00lib_txdone_bar_status(entry) || + test_bit(TXDONE_SUCCESS, &txdesc->flags); + + if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) { + /* + * Update TX statistics. + */ + rt2x00dev->link.qual.tx_success += success; + rt2x00dev->link.qual.tx_failed += !success; + + rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc, + success); + ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo); + } + + dev_kfree_skb_any(entry->skb); + rt2x00lib_clear_entry(rt2x00dev, entry); +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch); + +void rt2x00lib_txdone(struct queue_entry *entry, + struct txdone_entry_desc *txdesc) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + u8 skbdesc_flags = skbdesc->flags; + unsigned int header_length; + bool success; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(entry); + + /* + * Remove the extra tx headroom from the skb. + */ + skb_pull(entry->skb, rt2x00dev->extra_tx_headroom); + + /* + * Signal that the TX descriptor is no longer in the skb. + */ + skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; + + /* + * Determine the length of 802.11 header. + */ + header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + + /* + * Remove L2 padding which was added during + */ + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) + rt2x00queue_remove_l2pad(entry->skb, header_length); + + /* + * If the IV/EIV data was stripped from the frame before it was + * passed to the hardware, we should now reinsert it again because + * mac80211 will expect the same data to be present it the + * frame as it was passed to us. + */ + if (rt2x00_has_cap_hw_crypto(rt2x00dev)) + rt2x00crypto_tx_insert_iv(entry->skb, header_length); + + /* + * Send frame to debugfs immediately, after this call is completed + * we are going to overwrite the skb->cb array. + */ + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); + + /* + * Determine if the frame has been successfully transmitted and + * remove BARs from our check list while checking for their + * TX status. + */ + success = + rt2x00lib_txdone_bar_status(entry) || + test_bit(TXDONE_SUCCESS, &txdesc->flags) || + test_bit(TXDONE_UNKNOWN, &txdesc->flags); + + /* + * Update TX statistics. + */ + rt2x00dev->link.qual.tx_success += success; + rt2x00dev->link.qual.tx_failed += !success; + + rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success); + + /* + * Only send the status report to mac80211 when it's a frame + * that originated in mac80211. If this was a extra frame coming + * through a mac80211 library call (RTS/CTS) then we should not + * send the status report back. + */ + if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) { + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TASKLET_CONTEXT)) + ieee80211_tx_status(rt2x00dev->hw, entry->skb); + else + ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); + } else { + dev_kfree_skb_any(entry->skb); + } + + rt2x00lib_clear_entry(rt2x00dev, entry); +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone); + +void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status) +{ + struct txdone_entry_desc txdesc; + + txdesc.flags = 0; + __set_bit(status, &txdesc.flags); + txdesc.retry = 0; + + rt2x00lib_txdone(entry, &txdesc); +} +EXPORT_SYMBOL_GPL(rt2x00lib_txdone_noinfo); + +static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie) +{ + struct ieee80211_mgmt *mgmt = (void *)data; + u8 *pos, *end; + + pos = (u8 *)mgmt->u.beacon.variable; + end = data + len; + while (pos < end) { + if (pos + 2 + pos[1] > end) + return NULL; + + if (pos[0] == ie) + return pos; + + pos += 2 + pos[1]; + } + + return NULL; +} + +static void rt2x00lib_sleep(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, sleep_work); + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return; + + /* + * Check again is powersaving is enabled, to prevent races from delayed + * work execution. + */ + if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) + rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, + IEEE80211_CONF_CHANGE_PS); +} + +static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_bar_list_entry *entry; + struct ieee80211_bar *ba = (void *)skb->data; + + if (likely(!ieee80211_is_back(ba->frame_control))) + return; + + if (rxdesc->size < sizeof(*ba) + FCS_LEN) + return; + + rcu_read_lock(); + list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) { + + if (ba->start_seq_num != entry->start_seq_num) + continue; + +#define TID_CHECK(a, b) ( \ + ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) == \ + ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK))) \ + + if (!TID_CHECK(ba->control, entry->control)) + continue; + +#undef TID_CHECK + + if (!ether_addr_equal_64bits(ba->ra, entry->ta)) + continue; + + if (!ether_addr_equal_64bits(ba->ta, entry->ra)) + continue; + + /* Mark BAR since we received the according BA */ + spin_lock_bh(&rt2x00dev->bar_list_lock); + entry->block_acked = 1; + spin_unlock_bh(&rt2x00dev->bar_list_lock); + break; + } + rcu_read_unlock(); + +} + +static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc) +{ + struct ieee80211_hdr *hdr = (void *) skb->data; + struct ieee80211_tim_ie *tim_ie; + u8 *tim; + u8 tim_len; + bool cam; + + /* If this is not a beacon, or if mac80211 has no powersaving + * configured, or if the device is already in powersaving mode + * we can exit now. */ + if (likely(!ieee80211_is_beacon(hdr->frame_control) || + !(rt2x00dev->hw->conf.flags & IEEE80211_CONF_PS))) + return; + + /* min. beacon length + FCS_LEN */ + if (skb->len <= 40 + FCS_LEN) + return; + + /* and only beacons from the associated BSSID, please */ + if (!(rxdesc->dev_flags & RXDONE_MY_BSS) || + !rt2x00dev->aid) + return; + + rt2x00dev->last_beacon = jiffies; + + tim = rt2x00lib_find_ie(skb->data, skb->len - FCS_LEN, WLAN_EID_TIM); + if (!tim) + return; + + if (tim[1] < sizeof(*tim_ie)) + return; + + tim_len = tim[1]; + tim_ie = (struct ieee80211_tim_ie *) &tim[2]; + + /* Check whenever the PHY can be turned off again. */ + + /* 1. What about buffered unicast traffic for our AID? */ + cam = ieee80211_check_tim(tim_ie, tim_len, rt2x00dev->aid); + + /* 2. Maybe the AP wants to send multicast/broadcast data? */ + cam |= (tim_ie->bitmap_ctrl & 0x01); + + if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags)) + queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work); +} + +static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev, + struct rxdone_entry_desc *rxdesc) +{ + struct ieee80211_supported_band *sband; + const struct rt2x00_rate *rate; + unsigned int i; + int signal = rxdesc->signal; + int type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK); + + switch (rxdesc->rate_mode) { + case RATE_MODE_CCK: + case RATE_MODE_OFDM: + /* + * For non-HT rates the MCS value needs to contain the + * actually used rate modulation (CCK or OFDM). + */ + if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS) + signal = RATE_MCS(rxdesc->rate_mode, signal); + + sband = &rt2x00dev->bands[rt2x00dev->curr_band]; + for (i = 0; i < sband->n_bitrates; i++) { + rate = rt2x00_get_rate(sband->bitrates[i].hw_value); + if (((type == RXDONE_SIGNAL_PLCP) && + (rate->plcp == signal)) || + ((type == RXDONE_SIGNAL_BITRATE) && + (rate->bitrate == signal)) || + ((type == RXDONE_SIGNAL_MCS) && + (rate->mcs == signal))) { + return i; + } + } + break; + case RATE_MODE_HT_MIX: + case RATE_MODE_HT_GREENFIELD: + if (signal >= 0 && signal <= 76) + return signal; + break; + default: + break; + } + + rt2x00_warn(rt2x00dev, "Frame received with unrecognized signal, mode=0x%.4x, signal=0x%.4x, type=%d\n", + rxdesc->rate_mode, signal, type); + return 0; +} + +void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct rxdone_entry_desc rxdesc; + struct sk_buff *skb; + struct ieee80211_rx_status *rx_status; + unsigned int header_length; + int rate_idx; + + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) || + !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + goto submit_entry; + + if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + goto submit_entry; + + /* + * Allocate a new sk_buffer. If no new buffer available, drop the + * received frame and reuse the existing buffer. + */ + skb = rt2x00queue_alloc_rxskb(entry, gfp); + if (!skb) + goto submit_entry; + + /* + * Unmap the skb. + */ + rt2x00queue_unmap_skb(entry); + + /* + * Extract the RXD details. + */ + memset(&rxdesc, 0, sizeof(rxdesc)); + rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc); + + /* + * Check for valid size in case we get corrupted descriptor from + * hardware. + */ + if (unlikely(rxdesc.size == 0 || + rxdesc.size > entry->queue->data_size)) { + rt2x00_err(rt2x00dev, "Wrong frame size %d max %d\n", + rxdesc.size, entry->queue->data_size); + dev_kfree_skb(entry->skb); + goto renew_skb; + } + + /* + * The data behind the ieee80211 header must be + * aligned on a 4 byte boundary. + */ + header_length = ieee80211_get_hdrlen_from_skb(entry->skb); + + /* + * Hardware might have stripped the IV/EIV/ICV data, + * in that case it is possible that the data was + * provided separately (through hardware descriptor) + * in which case we should reinsert the data into the frame. + */ + if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) && + (rxdesc.flags & RX_FLAG_IV_STRIPPED)) + rt2x00crypto_rx_insert_iv(entry->skb, header_length, + &rxdesc); + else if (header_length && + (rxdesc.size > header_length) && + (rxdesc.dev_flags & RXDONE_L2PAD)) + rt2x00queue_remove_l2pad(entry->skb, header_length); + + /* Trim buffer to correct size */ + skb_trim(entry->skb, rxdesc.size); + + /* + * Translate the signal to the correct bitrate index. + */ + rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc); + if (rxdesc.rate_mode == RATE_MODE_HT_MIX || + rxdesc.rate_mode == RATE_MODE_HT_GREENFIELD) + rxdesc.encoding = RX_ENC_HT; + + /* + * Check if this is a beacon, and more frames have been + * buffered while we were in powersaving mode. + */ + rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc); + + /* + * Check for incoming BlockAcks to match to the BlockAckReqs + * we've send out. + */ + rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc); + + /* + * Update extra components + */ + rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); + rt2x00debug_update_crypto(rt2x00dev, &rxdesc); + rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry); + + /* + * Initialize RX status information, and send frame + * to mac80211. + */ + rx_status = IEEE80211_SKB_RXCB(entry->skb); + + /* Ensure that all fields of rx_status are initialized + * properly. The skb->cb array was used for driver + * specific informations, so rx_status might contain + * garbage. + */ + memset(rx_status, 0, sizeof(*rx_status)); + + rx_status->mactime = rxdesc.timestamp; + rx_status->band = rt2x00dev->curr_band; + rx_status->freq = rt2x00dev->curr_freq; + rx_status->rate_idx = rate_idx; + rx_status->signal = rxdesc.rssi; + rx_status->flag = rxdesc.flags; + rx_status->enc_flags = rxdesc.enc_flags; + rx_status->encoding = rxdesc.encoding; + rx_status->bw = rxdesc.bw; + rx_status->antenna = rt2x00dev->link.ant.active.rx; + + ieee80211_rx_ni(rt2x00dev->hw, entry->skb); + +renew_skb: + /* + * Replace the skb with the freshly allocated one. + */ + entry->skb = skb; + +submit_entry: + entry->flags = 0; + rt2x00queue_index_inc(entry, Q_INDEX_DONE); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) && + test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) + rt2x00dev->ops->lib->clear_entry(entry); +} +EXPORT_SYMBOL_GPL(rt2x00lib_rxdone); + +/* + * Driver initialization handlers. + */ +const struct rt2x00_rate rt2x00_supported_rates[12] = { + { + .flags = DEV_RATE_CCK, + .bitrate = 10, + .ratemask = BIT(0), + .plcp = 0x00, + .mcs = RATE_MCS(RATE_MODE_CCK, 0), + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, + .bitrate = 20, + .ratemask = BIT(1), + .plcp = 0x01, + .mcs = RATE_MCS(RATE_MODE_CCK, 1), + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, + .bitrate = 55, + .ratemask = BIT(2), + .plcp = 0x02, + .mcs = RATE_MCS(RATE_MODE_CCK, 2), + }, + { + .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE, + .bitrate = 110, + .ratemask = BIT(3), + .plcp = 0x03, + .mcs = RATE_MCS(RATE_MODE_CCK, 3), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 60, + .ratemask = BIT(4), + .plcp = 0x0b, + .mcs = RATE_MCS(RATE_MODE_OFDM, 0), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 90, + .ratemask = BIT(5), + .plcp = 0x0f, + .mcs = RATE_MCS(RATE_MODE_OFDM, 1), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 120, + .ratemask = BIT(6), + .plcp = 0x0a, + .mcs = RATE_MCS(RATE_MODE_OFDM, 2), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 180, + .ratemask = BIT(7), + .plcp = 0x0e, + .mcs = RATE_MCS(RATE_MODE_OFDM, 3), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 240, + .ratemask = BIT(8), + .plcp = 0x09, + .mcs = RATE_MCS(RATE_MODE_OFDM, 4), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 360, + .ratemask = BIT(9), + .plcp = 0x0d, + .mcs = RATE_MCS(RATE_MODE_OFDM, 5), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 480, + .ratemask = BIT(10), + .plcp = 0x08, + .mcs = RATE_MCS(RATE_MODE_OFDM, 6), + }, + { + .flags = DEV_RATE_OFDM, + .bitrate = 540, + .ratemask = BIT(11), + .plcp = 0x0c, + .mcs = RATE_MCS(RATE_MODE_OFDM, 7), + }, +}; + +static void rt2x00lib_channel(struct ieee80211_channel *entry, + const int channel, const int tx_power, + const int value) +{ + /* XXX: this assumption about the band is wrong for 802.11j */ + entry->band = channel <= 14 ? NL80211_BAND_2GHZ : NL80211_BAND_5GHZ; + entry->center_freq = ieee80211_channel_to_frequency(channel, + entry->band); + entry->hw_value = value; + entry->max_power = tx_power; + entry->max_antenna_gain = 0xff; +} + +static void rt2x00lib_rate(struct ieee80211_rate *entry, + const u16 index, const struct rt2x00_rate *rate) +{ + entry->flags = 0; + entry->bitrate = rate->bitrate; + entry->hw_value = index; + entry->hw_value_short = index; + + if (rate->flags & DEV_RATE_SHORT_PREAMBLE) + entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE; +} + +void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr) +{ + of_get_mac_address(rt2x00dev->dev->of_node, eeprom_mac_addr); + + if (!is_valid_ether_addr(eeprom_mac_addr)) { + eth_random_addr(eeprom_mac_addr); + rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", eeprom_mac_addr); + } +} +EXPORT_SYMBOL_GPL(rt2x00lib_set_mac_address); + +static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, + struct hw_mode_spec *spec) +{ + struct ieee80211_hw *hw = rt2x00dev->hw; + struct ieee80211_channel *channels; + struct ieee80211_rate *rates; + unsigned int num_rates; + unsigned int i; + + num_rates = 0; + if (spec->supported_rates & SUPPORT_RATE_CCK) + num_rates += 4; + if (spec->supported_rates & SUPPORT_RATE_OFDM) + num_rates += 8; + + channels = kcalloc(spec->num_channels, sizeof(*channels), GFP_KERNEL); + if (!channels) + return -ENOMEM; + + rates = kcalloc(num_rates, sizeof(*rates), GFP_KERNEL); + if (!rates) + goto exit_free_channels; + + /* + * Initialize Rate list. + */ + for (i = 0; i < num_rates; i++) + rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i)); + + /* + * Initialize Channel list. + */ + for (i = 0; i < spec->num_channels; i++) { + rt2x00lib_channel(&channels[i], + spec->channels[i].channel, + spec->channels_info[i].max_power, i); + } + + /* + * Intitialize 802.11b, 802.11g + * Rates: CCK, OFDM. + * Channels: 2.4 GHz + */ + if (spec->supported_bands & SUPPORT_BAND_2GHZ) { + rt2x00dev->bands[NL80211_BAND_2GHZ].n_channels = 14; + rt2x00dev->bands[NL80211_BAND_2GHZ].n_bitrates = num_rates; + rt2x00dev->bands[NL80211_BAND_2GHZ].channels = channels; + rt2x00dev->bands[NL80211_BAND_2GHZ].bitrates = rates; + hw->wiphy->bands[NL80211_BAND_2GHZ] = + &rt2x00dev->bands[NL80211_BAND_2GHZ]; + memcpy(&rt2x00dev->bands[NL80211_BAND_2GHZ].ht_cap, + &spec->ht, sizeof(spec->ht)); + } + + /* + * Intitialize 802.11a + * Rates: OFDM. + * Channels: OFDM, UNII, HiperLAN2. + */ + if (spec->supported_bands & SUPPORT_BAND_5GHZ) { + rt2x00dev->bands[NL80211_BAND_5GHZ].n_channels = + spec->num_channels - 14; + rt2x00dev->bands[NL80211_BAND_5GHZ].n_bitrates = + num_rates - 4; + rt2x00dev->bands[NL80211_BAND_5GHZ].channels = &channels[14]; + rt2x00dev->bands[NL80211_BAND_5GHZ].bitrates = &rates[4]; + hw->wiphy->bands[NL80211_BAND_5GHZ] = + &rt2x00dev->bands[NL80211_BAND_5GHZ]; + memcpy(&rt2x00dev->bands[NL80211_BAND_5GHZ].ht_cap, + &spec->ht, sizeof(spec->ht)); + } + + return 0; + + exit_free_channels: + kfree(channels); + rt2x00_err(rt2x00dev, "Allocation ieee80211 modes failed\n"); + return -ENOMEM; +} + +static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev) +{ + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) + ieee80211_unregister_hw(rt2x00dev->hw); + + if (likely(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ])) { + kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->channels); + kfree(rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ]->bitrates); + rt2x00dev->hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL; + rt2x00dev->hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL; + } + + kfree(rt2x00dev->spec.channels_info); + kfree(rt2x00dev->chan_survey); +} + +static const struct ieee80211_tpt_blink rt2x00_tpt_blink[] = { + { .throughput = 0 * 1024, .blink_time = 334 }, + { .throughput = 1 * 1024, .blink_time = 260 }, + { .throughput = 2 * 1024, .blink_time = 220 }, + { .throughput = 5 * 1024, .blink_time = 190 }, + { .throughput = 10 * 1024, .blink_time = 170 }, + { .throughput = 25 * 1024, .blink_time = 150 }, + { .throughput = 54 * 1024, .blink_time = 130 }, + { .throughput = 120 * 1024, .blink_time = 110 }, + { .throughput = 265 * 1024, .blink_time = 80 }, + { .throughput = 586 * 1024, .blink_time = 50 }, +}; + +static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + struct hw_mode_spec *spec = &rt2x00dev->spec; + int status; + + if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags)) + return 0; + + /* + * Initialize HW modes. + */ + status = rt2x00lib_probe_hw_modes(rt2x00dev, spec); + if (status) + return status; + + /* + * Initialize HW fields. + */ + rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues; + + /* + * Initialize extra TX headroom required. + */ + rt2x00dev->hw->extra_tx_headroom = + max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM, + rt2x00dev->extra_tx_headroom); + + /* + * Take TX headroom required for alignment into account. + */ + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE; + else if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) + rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE; + + /* + * Tell mac80211 about the size of our private STA structure. + */ + rt2x00dev->hw->sta_data_size = sizeof(struct rt2x00_sta); + + /* + * Allocate tx status FIFO for driver use. + */ + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_TXSTATUS_FIFO)) { + /* + * Allocate the txstatus fifo. In the worst case the tx + * status fifo has to hold the tx status of all entries + * in all tx queues. Hence, calculate the kfifo size as + * tx_queues * entry_num and round up to the nearest + * power of 2. + */ + int kfifo_size = + roundup_pow_of_two(rt2x00dev->ops->tx_queues * + rt2x00dev->tx->limit * + sizeof(u32)); + + status = kfifo_alloc(&rt2x00dev->txstatus_fifo, kfifo_size, + GFP_KERNEL); + if (status) + return status; + } + + /* + * Initialize tasklets if used by the driver. Tasklets are + * disabled until the interrupts are turned on. The driver + * has to handle that. + */ +#define RT2X00_TASKLET_INIT(taskletname) \ + if (rt2x00dev->ops->lib->taskletname) { \ + tasklet_setup(&rt2x00dev->taskletname, \ + rt2x00dev->ops->lib->taskletname); \ + } + + RT2X00_TASKLET_INIT(txstatus_tasklet); + RT2X00_TASKLET_INIT(pretbtt_tasklet); + RT2X00_TASKLET_INIT(tbtt_tasklet); + RT2X00_TASKLET_INIT(rxdone_tasklet); + RT2X00_TASKLET_INIT(autowake_tasklet); + +#undef RT2X00_TASKLET_INIT + + ieee80211_create_tpt_led_trigger(rt2x00dev->hw, + IEEE80211_TPT_LEDTRIG_FL_RADIO, + rt2x00_tpt_blink, + ARRAY_SIZE(rt2x00_tpt_blink)); + + /* + * Register HW. + */ + status = ieee80211_register_hw(rt2x00dev->hw); + if (status) + return status; + + set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); + + return 0; +} + +/* + * Initialization/uninitialization handlers. + */ +static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev) +{ + if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) + return; + + /* + * Stop rfkill polling. + */ + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) + rt2x00rfkill_unregister(rt2x00dev); + + /* + * Allow the HW to uninitialize. + */ + rt2x00dev->ops->lib->uninitialize(rt2x00dev); + + /* + * Free allocated queue entries. + */ + rt2x00queue_uninitialize(rt2x00dev); +} + +static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev) +{ + int status; + + if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags)) + return 0; + + /* + * Allocate all queue entries. + */ + status = rt2x00queue_initialize(rt2x00dev); + if (status) + return status; + + /* + * Initialize the device. + */ + status = rt2x00dev->ops->lib->initialize(rt2x00dev); + if (status) { + rt2x00queue_uninitialize(rt2x00dev); + return status; + } + + set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags); + + /* + * Start rfkill polling. + */ + if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) + rt2x00rfkill_register(rt2x00dev); + + return 0; +} + +int rt2x00lib_start(struct rt2x00_dev *rt2x00dev) +{ + int retval = 0; + + /* + * If this is the first interface which is added, + * we should load the firmware now. + */ + retval = rt2x00lib_load_firmware(rt2x00dev); + if (retval) + goto out; + + /* + * Initialize the device. + */ + retval = rt2x00lib_initialize(rt2x00dev); + if (retval) + goto out; + + rt2x00dev->intf_ap_count = 0; + rt2x00dev->intf_sta_count = 0; + rt2x00dev->intf_associated = 0; + + /* Enable the radio */ + retval = rt2x00lib_enable_radio(rt2x00dev); + if (retval) + goto out; + + set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags); + +out: + return retval; +} + +void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev) +{ + if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags)) + return; + + /* + * Perhaps we can add something smarter here, + * but for now just disabling the radio should do. + */ + rt2x00lib_disable_radio(rt2x00dev); + + rt2x00dev->intf_ap_count = 0; + rt2x00dev->intf_sta_count = 0; + rt2x00dev->intf_associated = 0; +} + +static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev) +{ + struct ieee80211_iface_limit *if_limit; + struct ieee80211_iface_combination *if_combination; + + if (rt2x00dev->ops->max_ap_intf < 2) + return; + + /* + * Build up AP interface limits structure. + */ + if_limit = &rt2x00dev->if_limits_ap; + if_limit->max = rt2x00dev->ops->max_ap_intf; + if_limit->types = BIT(NL80211_IFTYPE_AP); +#ifdef CONFIG_MAC80211_MESH + if_limit->types |= BIT(NL80211_IFTYPE_MESH_POINT); +#endif + + /* + * Build up AP interface combinations structure. + */ + if_combination = &rt2x00dev->if_combinations[IF_COMB_AP]; + if_combination->limits = if_limit; + if_combination->n_limits = 1; + if_combination->max_interfaces = if_limit->max; + if_combination->num_different_channels = 1; + + /* + * Finally, specify the possible combinations to mac80211. + */ + rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations; + rt2x00dev->hw->wiphy->n_iface_combinations = 1; +} + +static unsigned int rt2x00dev_extra_tx_headroom(struct rt2x00_dev *rt2x00dev) +{ + if (WARN_ON(!rt2x00dev->tx)) + return 0; + + if (rt2x00_is_usb(rt2x00dev)) + return rt2x00dev->tx[0].winfo_size + rt2x00dev->tx[0].desc_size; + + return rt2x00dev->tx[0].winfo_size; +} + +/* + * driver allocation handlers. + */ +int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) +{ + int retval = -ENOMEM; + + /* + * Set possible interface combinations. + */ + rt2x00lib_set_if_combinations(rt2x00dev); + + /* + * Allocate the driver data memory, if necessary. + */ + if (rt2x00dev->ops->drv_data_size > 0) { + rt2x00dev->drv_data = kzalloc(rt2x00dev->ops->drv_data_size, + GFP_KERNEL); + if (!rt2x00dev->drv_data) { + retval = -ENOMEM; + goto exit; + } + } + + spin_lock_init(&rt2x00dev->irqmask_lock); + mutex_init(&rt2x00dev->csr_mutex); + mutex_init(&rt2x00dev->conf_mutex); + INIT_LIST_HEAD(&rt2x00dev->bar_list); + spin_lock_init(&rt2x00dev->bar_list_lock); + hrtimer_init(&rt2x00dev->txstatus_timer, CLOCK_MONOTONIC, + HRTIMER_MODE_REL); + + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + + /* + * Make room for rt2x00_intf inside the per-interface + * structure ieee80211_vif. + */ + rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf); + + /* + * rt2x00 devices can only use the last n bits of the MAC address + * for virtual interfaces. + */ + rt2x00dev->hw->wiphy->addr_mask[ETH_ALEN - 1] = + (rt2x00dev->ops->max_ap_intf - 1); + + /* + * Initialize work. + */ + rt2x00dev->workqueue = + alloc_ordered_workqueue("%s", 0, wiphy_name(rt2x00dev->hw->wiphy)); + if (!rt2x00dev->workqueue) { + retval = -ENOMEM; + goto exit; + } + + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); + INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); + INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); + + /* + * Let the driver probe the device to detect the capabilities. + */ + retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev); + if (retval) { + rt2x00_err(rt2x00dev, "Failed to allocate device\n"); + goto exit; + } + + /* + * Allocate queue array. + */ + retval = rt2x00queue_allocate(rt2x00dev); + if (retval) + goto exit; + + /* Cache TX headroom value */ + rt2x00dev->extra_tx_headroom = rt2x00dev_extra_tx_headroom(rt2x00dev); + + /* + * Determine which operating modes are supported, all modes + * which require beaconing, depend on the availability of + * beacon entries. + */ + rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); + if (rt2x00dev->bcn->limit > 0) + rt2x00dev->hw->wiphy->interface_modes |= + BIT(NL80211_IFTYPE_ADHOC) | +#ifdef CONFIG_MAC80211_MESH + BIT(NL80211_IFTYPE_MESH_POINT) | +#endif + BIT(NL80211_IFTYPE_AP); + + rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + + wiphy_ext_feature_set(rt2x00dev->hw->wiphy, + NL80211_EXT_FEATURE_CQM_RSSI_LIST); + + /* + * Initialize ieee80211 structure. + */ + retval = rt2x00lib_probe_hw(rt2x00dev); + if (retval) { + rt2x00_err(rt2x00dev, "Failed to initialize hw\n"); + goto exit; + } + + /* + * Register extra components. + */ + rt2x00link_register(rt2x00dev); + rt2x00leds_register(rt2x00dev); + rt2x00debug_register(rt2x00dev); + + /* + * Start rfkill polling. + */ + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) + rt2x00rfkill_register(rt2x00dev); + + return 0; + +exit: + rt2x00lib_remove_dev(rt2x00dev); + + return retval; +} +EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev); + +void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) +{ + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + + /* + * Stop rfkill polling. + */ + if (!rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DELAYED_RFKILL)) + rt2x00rfkill_unregister(rt2x00dev); + + /* + * Disable radio. + */ + rt2x00lib_disable_radio(rt2x00dev); + + /* + * Stop all work. + */ + cancel_work_sync(&rt2x00dev->intf_work); + cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); + cancel_work_sync(&rt2x00dev->sleep_work); + + hrtimer_cancel(&rt2x00dev->txstatus_timer); + + /* + * Kill the tx status tasklet. + */ + tasklet_kill(&rt2x00dev->txstatus_tasklet); + tasklet_kill(&rt2x00dev->pretbtt_tasklet); + tasklet_kill(&rt2x00dev->tbtt_tasklet); + tasklet_kill(&rt2x00dev->rxdone_tasklet); + tasklet_kill(&rt2x00dev->autowake_tasklet); + + /* + * Uninitialize device. + */ + rt2x00lib_uninitialize(rt2x00dev); + + if (rt2x00dev->workqueue) + destroy_workqueue(rt2x00dev->workqueue); + + /* + * Free the tx status fifo. + */ + kfifo_free(&rt2x00dev->txstatus_fifo); + + /* + * Free extra components + */ + rt2x00debug_deregister(rt2x00dev); + rt2x00leds_unregister(rt2x00dev); + + /* + * Free ieee80211_hw memory. + */ + rt2x00lib_remove_hw(rt2x00dev); + + /* + * Free firmware image. + */ + rt2x00lib_free_firmware(rt2x00dev); + + /* + * Free queue structures. + */ + rt2x00queue_free(rt2x00dev); + + /* + * Free the driver data. + */ + kfree(rt2x00dev->drv_data); +} +EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev); + +/* + * Device state handlers + */ +int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev) +{ + rt2x00_dbg(rt2x00dev, "Going to sleep\n"); + + /* + * Prevent mac80211 from accessing driver while suspended. + */ + if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return 0; + + /* + * Cleanup as much as possible. + */ + rt2x00lib_uninitialize(rt2x00dev); + + /* + * Suspend/disable extra components. + */ + rt2x00leds_suspend(rt2x00dev); + rt2x00debug_deregister(rt2x00dev); + + /* + * Set device mode to sleep for power management, + * on some hardware this call seems to consistently fail. + * From the specifications it is hard to tell why it fails, + * and if this is a "bad thing". + * Overall it is safe to just ignore the failure and + * continue suspending. The only downside is that the + * device will not be in optimal power save mode, but with + * the radio and the other components already disabled the + * device is as good as disabled. + */ + if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP)) + rt2x00_warn(rt2x00dev, "Device failed to enter sleep state, continue suspending\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_suspend); + +int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev) +{ + rt2x00_dbg(rt2x00dev, "Waking up\n"); + + /* + * Restore/enable extra components. + */ + rt2x00debug_register(rt2x00dev); + rt2x00leds_resume(rt2x00dev); + + /* + * We are ready again to receive requests from mac80211. + */ + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + + return 0; +} +EXPORT_SYMBOL_GPL(rt2x00lib_resume); + +/* + * rt2x00lib module information. + */ +MODULE_AUTHOR(DRV_PROJECT); +MODULE_VERSION(DRV_VERSION); +MODULE_DESCRIPTION("rt2x00 library"); +MODULE_LICENSE("GPL"); |