diff options
Diffstat (limited to 'drivers/pinctrl/aspeed/pinmux-aspeed.h')
| -rw-r--r-- | drivers/pinctrl/aspeed/pinmux-aspeed.h | 821 |
1 files changed, 821 insertions, 0 deletions
diff --git a/drivers/pinctrl/aspeed/pinmux-aspeed.h b/drivers/pinctrl/aspeed/pinmux-aspeed.h new file mode 100644 index 000000000..aaa78a613 --- /dev/null +++ b/drivers/pinctrl/aspeed/pinmux-aspeed.h @@ -0,0 +1,821 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Copyright (C) 2019 IBM Corp. */ + +#ifndef ASPEED_PINMUX_H +#define ASPEED_PINMUX_H + +#include <linux/regmap.h> + +/* + * The ASPEED SoCs provide typically more than 200 pins for GPIO and other + * functions. The SoC function enabled on a pin is determined on a priority + * basis where a given pin can provide a number of different signal types. + * + * The signal active on a pin is described by both a priority level and + * compound logical expressions involving multiple operators, registers and + * bits. Some difficulty arises as the pin's function bit masks for each + * priority level are frequently not the same (i.e. cannot just flip a bit to + * change from a high to low priority signal), or even in the same register. + * Further, not all signals can be unmuxed, as some expressions depend on + * values in the hardware strapping register (which may be treated as + * read-only). + * + * SoC Multi-function Pin Expression Examples + * ------------------------------------------ + * + * Here are some sample mux configurations from the AST2400 and AST2500 + * datasheets to illustrate the corner cases, roughly in order of least to most + * corner. The signal priorities are in decending order from P0 (highest). + * + * D6 is a pin with a single function (beside GPIO); a high priority signal + * that participates in one function: + * + * Ball | Default | P0 Signal | P0 Expression | P1 Signal | P1 Expression | Other + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * D6 GPIOA0 MAC1LINK SCU80[0]=1 GPIOA0 + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * + * C5 is a multi-signal pin (high and low priority signals). Here we touch + * different registers for the different functions that enable each signal: + * + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * C5 GPIOA4 SCL9 SCU90[22]=1 TIMER5 SCU80[4]=1 GPIOA4 + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * + * E19 is a single-signal pin with two functions that influence the active + * signal. In this case both bits have the same meaning - enable a dedicated + * LPC reset pin. However it's not always the case that the bits in the + * OR-relationship have the same meaning. + * + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * E19 GPIOB4 LPCRST# SCU80[12]=1 | Strap[14]=1 GPIOB4 + * -----+---------+-----------+-----------------------------+-----------+---------------+---------- + * + * For example, pin B19 has a low-priority signal that's enabled by two + * distinct SoC functions: A specific SIOPBI bit in register SCUA4, and an ACPI + * bit in the STRAP register. The ACPI bit configures signals on pins in + * addition to B19. Both of the low priority functions as well as the high + * priority function must be disabled for GPIOF1 to be used. + * + * Ball | Default | P0 Signal | P0 Expression | P1 Signal | P1 Expression | Other + * -----+---------+-----------+-----------------------------------------+-----------+----------------------------------------+---------- + * B19 GPIOF1 NDCD4 SCU80[25]=1 SIOPBI# SCUA4[12]=1 | Strap[19]=0 GPIOF1 + * -----+---------+-----------+-----------------------------------------+-----------+----------------------------------------+---------- + * + * For pin E18, the SoC ANDs the expected state of three bits to determine the + * pin's active signal: + * + * * SCU3C[3]: Enable external SOC reset function + * * SCU80[15]: Enable SPICS1# or EXTRST# function pin + * * SCU90[31]: Select SPI interface CS# output + * + * -----+---------+-----------+-----------------------------------------+-----------+----------------------------------------+---------- + * E18 GPIOB7 EXTRST# SCU3C[3]=1 & SCU80[15]=1 & SCU90[31]=0 SPICS1# SCU3C[3]=1 & SCU80[15]=1 & SCU90[31]=1 GPIOB7 + * -----+---------+-----------+-----------------------------------------+-----------+----------------------------------------+---------- + * + * (Bits SCU3C[3] and SCU80[15] appear to only be used in the expressions for + * selecting the signals on pin E18) + * + * Pin T5 is a multi-signal pin with a more complex configuration: + * + * Ball | Default | P0 Signal | P0 Expression | P1 Signal | P1 Expression | Other + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * T5 GPIOL1 VPIDE SCU90[5:4]!=0 & SCU84[17]=1 NDCD1 SCU84[17]=1 GPIOL1 + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * + * The high priority signal configuration is best thought of in terms of its + * exploded form, with reference to the SCU90[5:4] bits: + * + * * SCU90[5:4]=00: disable + * * SCU90[5:4]=01: 18 bits (R6/G6/B6) video mode. + * * SCU90[5:4]=10: 24 bits (R8/G8/B8) video mode. + * * SCU90[5:4]=11: 30 bits (R10/G10/B10) video mode. + * + * Re-writing: + * + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * T5 GPIOL1 VPIDE (SCU90[5:4]=1 & SCU84[17]=1) NDCD1 SCU84[17]=1 GPIOL1 + * | (SCU90[5:4]=2 & SCU84[17]=1) + * | (SCU90[5:4]=3 & SCU84[17]=1) + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * + * For reference the SCU84[17] bit configure the "UART1 NDCD1 or Video VPIDE + * function pin", where the signal itself is determined by whether SCU94[5:4] + * is disabled or in one of the 18, 24 or 30bit video modes. + * + * Other video-input-related pins require an explicit state in SCU90[5:4], e.g. + * W1 and U5: + * + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * W1 GPIOL6 VPIB0 SCU90[5:4]=3 & SCU84[22]=1 TXD1 SCU84[22]=1 GPIOL6 + * U5 GPIOL7 VPIB1 SCU90[5:4]=3 & SCU84[23]=1 RXD1 SCU84[23]=1 GPIOL7 + * -----+---------+-----------+------------------------------+-----------+---------------+---------- + * + * The examples of T5 and W1 are particularly fertile, as they also demonstrate + * that despite operating as part of the video input bus each signal needs to + * be enabled individually via it's own SCU84 (in the cases of T5 and W1) + * register bit. This is a little crazy if the bus doesn't have optional + * signals, but is used to decent effect with some of the UARTs where not all + * signals are required. However, this isn't done consistently - UART1 is + * enabled on a per-pin basis, and by contrast, all signals for UART6 are + * enabled by a single bit. + * + * Further, the high and low priority signals listed in the table above share + * a configuration bit. The VPI signals should operate in concert in a single + * function, but the UART signals should retain the ability to be configured + * independently. This pushes the implementation down the path of tagging a + * signal's expressions with the function they participate in, rather than + * defining masks affecting multiple signals per function. The latter approach + * fails in this instance where applying the configuration for the UART pin of + * interest will stomp on the state of other UART signals when disabling the + * VPI functions on the current pin. + * + * Ball | Default | P0 Signal | P0 Expression | P1 Signal | P1 Expression | Other + * -----+------------+-----------+---------------------------+-----------+---------------+------------ + * A12 RGMII1TXCK GPIOT0 SCUA0[0]=1 RMII1TXEN Strap[6]=0 RGMII1TXCK + * B12 RGMII1TXCTL GPIOT1 SCUA0[1]=1 – Strap[6]=0 RGMII1TXCTL + * -----+------------+-----------+---------------------------+-----------+---------------+------------ + * + * A12 demonstrates that the "Other" signal isn't always GPIO - in this case + * GPIOT0 is a high-priority signal and RGMII1TXCK is Other. Thus, GPIO + * should be treated like any other signal type with full function expression + * requirements, and not assumed to be the default case. Separately, GPIOT0 and + * GPIOT1's signal descriptor bits are distinct, therefore we must iterate all + * pins in the function's group to disable the higher-priority signals such + * that the signal for the function of interest is correctly enabled. + * + * Finally, three priority levels aren't always enough; the AST2500 brings with + * it 18 pins of five priority levels, however the 18 pins only use three of + * the five priority levels. + * + * Ultimately the requirement to control pins in the examples above drive the + * design: + * + * * Pins provide signals according to functions activated in the mux + * configuration + * + * * Pins provide up to five signal types in a priority order + * + * * For priorities levels defined on a pin, each priority provides one signal + * + * * Enabling lower priority signals requires higher priority signals be + * disabled + * + * * A function represents a set of signals; functions are distinct if they + * do not share a subset of signals (and may be distinct if they are a + * strict subset). + * + * * Signals participate in one or more functions or groups + * + * * A function is described by an expression of one or more signal + * descriptors, which compare bit values in a register + * + * * A signal expression is the smallest set of signal descriptors whose + * comparisons must evaluate 'true' for a signal to be enabled on a pin. + * + * * A signal participating in a function is active on a pin if evaluating all + * signal descriptors in the pin's signal expression for the function yields + * a 'true' result + * + * * A signal at a given priority on a given pin is active if any of the + * functions in which the signal participates are active, and no higher + * priority signal on the pin is active + * + * * GPIO is configured per-pin + * + * And so: + * + * * To disable a signal, any function(s) activating the signal must be + * disabled + * + * * Each pin must know the signal expressions of functions in which it + * participates, for the purpose of enabling the Other function. This is done + * by deactivating all functions that activate higher priority signals on the + * pin. + * + * As a concrete example: + * + * * T5 provides three signals types: VPIDE, NDCD1 and GPIO + * + * * The VPIDE signal participates in 3 functions: VPI18, VPI24 and VPI30 + * + * * The NDCD1 signal participates in just its own NDCD1 function + * + * * VPIDE is high priority, NDCD1 is low priority, and GPIOL1 is the least + * prioritised + * + * * The prerequisit for activating the NDCD1 signal is that the VPI18, VPI24 + * and VPI30 functions all be disabled + * + * * Similarly, all of VPI18, VPI24, VPI30 and NDCD1 functions must be disabled + * to provide GPIOL6 + * + * Considerations + * -------------- + * + * If pinctrl allows us to allocate a pin we can configure a function without + * concern for the function of already allocated pins, if pin groups are + * created with respect to the SoC functions in which they participate. This is + * intuitive, but it did not feel obvious from the bit/pin relationships. + * + * Conversely, failing to allocate all pins in a group indicates some bits (as + * well as pins) required for the group's configuration will already be in use, + * likely in a way that's inconsistent with the requirements of the failed + * group. + * + * Implementation + * -------------- + * + * Beyond the documentation below the various structures and helper macros that + * allow the implementation to hang together are defined. The macros are fairly + * dense, so below we walk through some raw examples of the configuration + * tables in an effort to clarify the concepts. + * + * The complexity of configuring the mux combined with the scale of the pins + * and functions was a concern, so the table design along with the macro jungle + * is an attempt to address it. The rough principles of the approach are: + * + * 1. Use a data-driven solution rather than embedding state into code + * 2. Minimise editing to the specifics of the given mux configuration + * 3. Detect as many errors as possible at compile time + * + * Addressing point 3 leads to naming of symbols in terms of the four + * properties associated with a given mux configuration: The pin, the signal, + * the group and the function. In this way copy/paste errors cause duplicate + * symbols to be defined, which prevents successful compilation. Failing to + * properly parent the tables leads to unused symbol warnings, and use of + * designated initialisers and additional warnings ensures that there are + * no override errors in the pin, group and function arrays. + * + * Addressing point 2 drives the development of the macro jungle, as it + * centralises the definition noise at the cost of taking some time to + * understand. + * + * Here's a complete, concrete "pre-processed" example of the table structures + * used to describe the D6 ball from the examples above: + * + * ``` + * static const struct aspeed_sig_desc sig_descs_MAC1LINK_MAC1LINK[] = { + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x80, + * .mask = BIT(0), + * .enable = 1, + * .disable = 0 + * }, + * }; + * + * static const struct aspeed_sig_expr sig_expr_MAC1LINK_MAC1LINK = { + * .signal = "MAC1LINK", + * .function = "MAC1LINK", + * .ndescs = ARRAY_SIZE(sig_descs_MAC1LINK_MAC1LINK), + * .descs = &(sig_descs_MAC1LINK_MAC1LINK)[0], + * }; + * + * static const struct aspeed_sig_expr *sig_exprs_MAC1LINK_MAC1LINK[] = { + * &sig_expr_MAC1LINK_MAC1LINK, + * NULL, + * }; + * + * static const struct aspeed_sig_desc sig_descs_GPIOA0_GPIOA0[] = { }; + * + * static const struct aspeed_sig_expr sig_expr_GPIOA0_GPIOA0 = { + * .signal = "GPIOA0", + * .function = "GPIOA0", + * .ndescs = ARRAY_SIZE(sig_descs_GPIOA0_GPIOA0), + * .descs = &(sig_descs_GPIOA0_GPIOA0)[0], + * }; + * + * static const struct aspeed_sig_expr *sig_exprs_GPIOA0_GPIOA0[] = { + * &sig_expr_GPIOA0_GPIOA0, + * NULL + * }; + * + * static const struct aspeed_sig_expr **pin_exprs_0[] = { + * sig_exprs_MAC1LINK_MAC1LINK, + * sig_exprs_GPIOA0_GPIOA0, + * NULL + * }; + * + * static const struct aspeed_pin_desc pin_0 = { "0", (&pin_exprs_0[0]) }; + * static const int group_pins_MAC1LINK[] = { 0 }; + * static const char *func_groups_MAC1LINK[] = { "MAC1LINK" }; + * + * static struct pinctrl_pin_desc aspeed_g4_pins[] = { + * [0] = { .number = 0, .name = "D6", .drv_data = &pin_0 }, + * }; + * + * static const struct aspeed_pin_group aspeed_g4_groups[] = { + * { + * .name = "MAC1LINK", + * .pins = &(group_pins_MAC1LINK)[0], + * .npins = ARRAY_SIZE(group_pins_MAC1LINK), + * }, + * }; + * + * static const struct aspeed_pin_function aspeed_g4_functions[] = { + * { + * .name = "MAC1LINK", + * .groups = &func_groups_MAC1LINK[0], + * .ngroups = ARRAY_SIZE(func_groups_MAC1LINK), + * }, + * }; + * ``` + * + * At the end of the day much of the above code is compressed into the + * following two lines: + * + * ``` + * #define D6 0 + * SSSF_PIN_DECL(D6, GPIOA0, MAC1LINK, SIG_DESC_SET(SCU80, 0)); + * ``` + * + * The two examples below show just the differences from the example above. + * + * Ball E18 demonstrates a function, EXTRST, that requires multiple descriptors + * be set for it to be muxed: + * + * ``` + * static const struct aspeed_sig_desc sig_descs_EXTRST_EXTRST[] = { + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x3C, + * .mask = BIT(3), + * .enable = 1, + * .disable = 0 + * }, + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x80, + * .mask = BIT(15), + * .enable = 1, + * .disable = 0 + * }, + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x90, + * .mask = BIT(31), + * .enable = 0, + * .disable = 1 + * }, + * }; + * + * static const struct aspeed_sig_expr sig_expr_EXTRST_EXTRST = { + * .signal = "EXTRST", + * .function = "EXTRST", + * .ndescs = ARRAY_SIZE(sig_descs_EXTRST_EXTRST), + * .descs = &(sig_descs_EXTRST_EXTRST)[0], + * }; + * ... + * ``` + * + * For ball E19, we have multiple functions enabling a single signal, LPCRST#. + * The data structures look like: + * + * static const struct aspeed_sig_desc sig_descs_LPCRST_LPCRST[] = { + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x80, + * .mask = BIT(12), + * .enable = 1, + * .disable = 0 + * }, + * }; + * + * static const struct aspeed_sig_expr sig_expr_LPCRST_LPCRST = { + * .signal = "LPCRST", + * .function = "LPCRST", + * .ndescs = ARRAY_SIZE(sig_descs_LPCRST_LPCRST), + * .descs = &(sig_descs_LPCRST_LPCRST)[0], + * }; + * + * static const struct aspeed_sig_desc sig_descs_LPCRST_LPCRSTS[] = { + * { + * .ip = ASPEED_IP_SCU, + * .reg = 0x70, + * .mask = BIT(14), + * .enable = 1, + * .disable = 0 + * }, + * }; + * + * static const struct aspeed_sig_expr sig_expr_LPCRST_LPCRSTS = { + * .signal = "LPCRST", + * .function = "LPCRSTS", + * .ndescs = ARRAY_SIZE(sig_descs_LPCRST_LPCRSTS), + * .descs = &(sig_descs_LPCRST_LPCRSTS)[0], + * }; + * + * static const struct aspeed_sig_expr *sig_exprs_LPCRST_LPCRST[] = { + * &sig_expr_LPCRST_LPCRST, + * &sig_expr_LPCRST_LPCRSTS, + * NULL, + * }; + * ... + * ``` + * + * Both expressions listed in the sig_exprs_LPCRST_LPCRST array need to be set + * to disabled for the associated GPIO to be muxed. + * + */ + +#define ASPEED_IP_SCU 0 +#define ASPEED_IP_GFX 1 +#define ASPEED_IP_LPC 2 +#define ASPEED_NR_PINMUX_IPS 3 + + /** + * A signal descriptor, which describes the register, bits and the + * enable/disable values that should be compared or written. + * + * @ip: The IP block identifier, used as an index into the regmap array in + * struct aspeed_pinctrl_data + * @reg: The register offset with respect to the base address of the IP block + * @mask: The mask to apply to the register. The lowest set bit of the mask is + * used to derive the shift value. + * @enable: The value that enables the function. Value should be in the LSBs, + * not at the position of the mask. + * @disable: The value that disables the function. Value should be in the + * LSBs, not at the position of the mask. + */ +struct aspeed_sig_desc { + unsigned int ip; + unsigned int reg; + u32 mask; + u32 enable; + u32 disable; +}; + +/** + * Describes a signal expression. The expression is evaluated by ANDing the + * evaluation of the descriptors. + * + * @signal: The signal name for the priority level on the pin. If the signal + * type is GPIO, then the signal name must begin with the + * prefix "GPI", e.g. GPIOA0, GPIT0 etc. + * @function: The name of the function the signal participates in for the + * associated expression. For pin-specific GPIO, the function + * name must match the signal name. + * @ndescs: The number of signal descriptors in the expression + * @descs: Pointer to an array of signal descriptors that comprise the + * function expression + */ +struct aspeed_sig_expr { + const char *signal; + const char *function; + int ndescs; + const struct aspeed_sig_desc *descs; +}; + +/** + * A struct capturing the list of expressions enabling signals at each priority + * for a given pin. The signal configuration for a priority level is evaluated + * by ORing the evaluation of the signal expressions in the respective + * priority's list. + * + * @name: A name for the pin + * @prios: A pointer to an array of expression list pointers + * + */ +struct aspeed_pin_desc { + const char *name; + const struct aspeed_sig_expr ***prios; +}; + +/* Macro hell */ + +#define SIG_DESC_IP_BIT(ip, reg, idx, val) \ + { ip, reg, BIT_MASK(idx), val, (((val) + 1) & 1) } + +/** + * Short-hand macro for describing an SCU descriptor enabled by the state of + * one bit. The disable value is derived. + * + * @reg: The signal's associated register, offset from base + * @idx: The signal's bit index in the register + * @val: The value (0 or 1) that enables the function + */ +#define SIG_DESC_BIT(reg, idx, val) \ + SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, val) + +#define SIG_DESC_IP_SET(ip, reg, idx) SIG_DESC_IP_BIT(ip, reg, idx, 1) + +/** + * A further short-hand macro expanding to an SCU descriptor enabled by a set + * bit. + * + * @reg: The register, offset from base + * @idx: The bit index in the register + */ +#define SIG_DESC_SET(reg, idx) SIG_DESC_IP_BIT(ASPEED_IP_SCU, reg, idx, 1) +#define SIG_DESC_CLEAR(reg, idx) { ASPEED_IP_SCU, reg, BIT_MASK(idx), 0, 0 } + +#define SIG_DESC_LIST_SYM(sig, group) sig_descs_ ## sig ## _ ## group +#define SIG_DESC_LIST_DECL(sig, group, ...) \ + static const struct aspeed_sig_desc SIG_DESC_LIST_SYM(sig, group)[] = \ + { __VA_ARGS__ } + +#define SIG_EXPR_SYM(sig, group) sig_expr_ ## sig ## _ ## group +#define SIG_EXPR_DECL_(sig, group, func) \ + static const struct aspeed_sig_expr SIG_EXPR_SYM(sig, group) = \ + { \ + .signal = #sig, \ + .function = #func, \ + .ndescs = ARRAY_SIZE(SIG_DESC_LIST_SYM(sig, group)), \ + .descs = &(SIG_DESC_LIST_SYM(sig, group))[0], \ + } + +/** + * Declare a signal expression. + * + * @sig: A macro symbol name for the signal (is subjected to stringification + * and token pasting) + * @func: The function in which the signal is participating + * @...: Signal descriptors that define the signal expression + * + * For example, the following declares the ROMD8 signal for the ROM16 function: + * + * SIG_EXPR_DECL(ROMD8, ROM16, ROM16, SIG_DESC_SET(SCU90, 6)); + * + * And with multiple signal descriptors: + * + * SIG_EXPR_DECL(ROMD8, ROM16S, ROM16S, SIG_DESC_SET(HW_STRAP1, 4), + * { HW_STRAP1, GENMASK(1, 0), 0, 0 }); + */ +#define SIG_EXPR_DECL(sig, group, func, ...) \ + SIG_DESC_LIST_DECL(sig, group, __VA_ARGS__); \ + SIG_EXPR_DECL_(sig, group, func) + +/** + * Declare a pointer to a signal expression + * + * @sig: The macro symbol name for the signal (subjected to token pasting) + * @func: The macro symbol name for the function (subjected to token pasting) + */ +#define SIG_EXPR_PTR(sig, group) (&SIG_EXPR_SYM(sig, group)) + +#define SIG_EXPR_LIST_SYM(sig, group) sig_exprs_ ## sig ## _ ## group + +/** + * Declare a signal expression list for reference in a struct aspeed_pin_prio. + * + * @sig: A macro symbol name for the signal (is subjected to token pasting) + * @...: Signal expression structure pointers (use SIG_EXPR_PTR()) + * + * For example, the 16-bit ROM bus can be enabled by one of two possible signal + * expressions: + * + * SIG_EXPR_DECL(ROMD8, ROM16, ROM16, SIG_DESC_SET(SCU90, 6)); + * SIG_EXPR_DECL(ROMD8, ROM16S, ROM16S, SIG_DESC_SET(HW_STRAP1, 4), + * { HW_STRAP1, GENMASK(1, 0), 0, 0 }); + * SIG_EXPR_LIST_DECL(ROMD8, SIG_EXPR_PTR(ROMD8, ROM16), + * SIG_EXPR_PTR(ROMD8, ROM16S)); + */ +#define SIG_EXPR_LIST_DECL(sig, group, ...) \ + static const struct aspeed_sig_expr *SIG_EXPR_LIST_SYM(sig, group)[] =\ + { __VA_ARGS__, NULL } + +#define stringify(x) #x +#define istringify(x) stringify(x) + +/** + * Create an expression symbol alias from (signal, group) to (pin, signal). + * + * @pin: The pin number + * @sig: The signal name + * @group: The name of the group of which the pin is a member that is + * associated with the function's signal + * + * Using an alias in this way enables detection of copy/paste errors (defining + * the signal for a group multiple times) whilst enabling multiple pin groups + * to exist for a signal without intrusive side-effects on defining the list of + * signals available on a pin. + */ +#define SIG_EXPR_LIST_ALIAS(pin, sig, group) \ + static const struct aspeed_sig_expr *\ + SIG_EXPR_LIST_SYM(pin, sig)[ARRAY_SIZE(SIG_EXPR_LIST_SYM(sig, group))] \ + __attribute__((alias(istringify(SIG_EXPR_LIST_SYM(sig, group))))) + +/** + * A short-hand macro for declaring a function expression and an expression + * list with a single expression (SE) and a single group (SG) of pins. + * + * @pin: The pin the signal will be routed to + * @sig: The signal that will be routed to the pin for the function + * @func: A macro symbol name for the function + * @...: Function descriptors that define the function expression + * + * For example, signal NCTS6 participates in its own function with one group: + * + * SIG_EXPR_LIST_DECL_SINGLE(A18, NCTS6, NCTS6, SIG_DESC_SET(SCU90, 7)); + */ +#define SIG_EXPR_LIST_DECL_SESG(pin, sig, func, ...) \ + SIG_DESC_LIST_DECL(sig, func, __VA_ARGS__); \ + SIG_EXPR_DECL_(sig, func, func); \ + SIG_EXPR_LIST_DECL(sig, func, SIG_EXPR_PTR(sig, func)); \ + SIG_EXPR_LIST_ALIAS(pin, sig, func) + +/** + * Similar to the above, but for pins with a single expression (SE) and + * multiple groups (MG) of pins. + * + * @pin: The pin the signal will be routed to + * @sig: The signal that will be routed to the pin for the function + * @group: The name of the function's pin group in which the pin participates + * @func: A macro symbol name for the function + * @...: Function descriptors that define the function expression + */ +#define SIG_EXPR_LIST_DECL_SEMG(pin, sig, group, func, ...) \ + SIG_DESC_LIST_DECL(sig, group, __VA_ARGS__); \ + SIG_EXPR_DECL_(sig, group, func); \ + SIG_EXPR_LIST_DECL(sig, group, SIG_EXPR_PTR(sig, group)); \ + SIG_EXPR_LIST_ALIAS(pin, sig, group) + +/** + * Similar to the above, but for pins with a dual expressions (DE) + * and a single group (SG) of pins. + * + * @pin: The pin the signal will be routed to + * @sig: The signal that will be routed to the pin for the function + * @group: The name of the function's pin group in which the pin participates + * @func: A macro symbol name for the function + * @...: Function descriptors that define the function expression + */ +#define SIG_EXPR_LIST_DECL_DESG(pin, sig, f0, f1) \ + SIG_EXPR_LIST_DECL(sig, f0, \ + SIG_EXPR_PTR(sig, f0), \ + SIG_EXPR_PTR(sig, f1)); \ + SIG_EXPR_LIST_ALIAS(pin, sig, f0) + +#define SIG_EXPR_LIST_PTR(sig, group) SIG_EXPR_LIST_SYM(sig, group) + +#define PIN_EXPRS_SYM(pin) pin_exprs_ ## pin +#define PIN_EXPRS_PTR(pin) (&PIN_EXPRS_SYM(pin)[0]) +#define PIN_SYM(pin) pin_ ## pin + +#define PIN_DECL_(pin, ...) \ + static const struct aspeed_sig_expr **PIN_EXPRS_SYM(pin)[] = \ + { __VA_ARGS__, NULL }; \ + static const struct aspeed_pin_desc PIN_SYM(pin) = \ + { #pin, PIN_EXPRS_PTR(pin) } + +/** + * Declare a single signal pin + * + * @pin: The pin number + * @other: Macro name for "other" functionality (subjected to stringification) + * @sig: Macro name for the signal (subjected to stringification) + * + * For example: + * + * #define E3 80 + * SIG_EXPR_LIST_DECL_SINGLE(SCL5, I2C5, I2C5_DESC); + * PIN_DECL_1(E3, GPIOK0, SCL5); + */ +#define PIN_DECL_1(pin, other, sig) \ + SIG_EXPR_LIST_DECL_SESG(pin, other, other); \ + PIN_DECL_(pin, SIG_EXPR_LIST_PTR(pin, sig), \ + SIG_EXPR_LIST_PTR(pin, other)) + +/** + * Single signal, single function pin declaration + * + * @pin: The pin number + * @other: Macro name for "other" functionality (subjected to stringification) + * @sig: Macro name for the signal (subjected to stringification) + * @...: Signal descriptors that define the function expression + * + * For example: + * + * SSSF_PIN_DECL(A4, GPIOA2, TIMER3, SIG_DESC_SET(SCU80, 2)); + */ +#define SSSF_PIN_DECL(pin, other, sig, ...) \ + SIG_EXPR_LIST_DECL_SESG(pin, sig, sig, __VA_ARGS__); \ + SIG_EXPR_LIST_DECL_SESG(pin, other, other); \ + PIN_DECL_(pin, SIG_EXPR_LIST_PTR(pin, sig), \ + SIG_EXPR_LIST_PTR(pin, other)); \ + FUNC_GROUP_DECL(sig, pin) +/** + * Declare a two-signal pin + * + * @pin: The pin number + * @other: Macro name for "other" functionality (subjected to stringification) + * @high: Macro name for the highest priority signal functions + * @low: Macro name for the low signal functions + * + * For example: + * + * #define A8 56 + * SIG_EXPR_DECL(ROMD8, ROM16, SIG_DESC_SET(SCU90, 6)); + * SIG_EXPR_DECL(ROMD8, ROM16S, SIG_DESC_SET(HW_STRAP1, 4), + * { HW_STRAP1, GENMASK(1, 0), 0, 0 }); + * SIG_EXPR_LIST_DECL(ROMD8, SIG_EXPR_PTR(ROMD8, ROM16), + * SIG_EXPR_PTR(ROMD8, ROM16S)); + * SIG_EXPR_LIST_DECL_SINGLE(NCTS6, NCTS6, SIG_DESC_SET(SCU90, 7)); + * PIN_DECL_2(A8, GPIOH0, ROMD8, NCTS6); + */ +#define PIN_DECL_2(pin, other, high, low) \ + SIG_EXPR_LIST_DECL_SESG(pin, other, other); \ + PIN_DECL_(pin, \ + SIG_EXPR_LIST_PTR(pin, high), \ + SIG_EXPR_LIST_PTR(pin, low), \ + SIG_EXPR_LIST_PTR(pin, other)) + +#define PIN_DECL_3(pin, other, high, medium, low) \ + SIG_EXPR_LIST_DECL_SESG(pin, other, other); \ + PIN_DECL_(pin, \ + SIG_EXPR_LIST_PTR(pin, high), \ + SIG_EXPR_LIST_PTR(pin, medium), \ + SIG_EXPR_LIST_PTR(pin, low), \ + SIG_EXPR_LIST_PTR(pin, other)) + +#define PIN_DECL_4(pin, other, prio1, prio2, prio3, prio4) \ + SIG_EXPR_LIST_DECL_SESG(pin, other, other); \ + PIN_DECL_(pin, \ + SIG_EXPR_LIST_PTR(pin, prio1), \ + SIG_EXPR_LIST_PTR(pin, prio2), \ + SIG_EXPR_LIST_PTR(pin, prio3), \ + SIG_EXPR_LIST_PTR(pin, prio4), \ + SIG_EXPR_LIST_PTR(pin, other)) + +#define GROUP_SYM(group) group_pins_ ## group +#define GROUP_DECL(group, ...) \ + static const int GROUP_SYM(group)[] = { __VA_ARGS__ } + +#define FUNC_SYM(func) func_groups_ ## func +#define FUNC_DECL_(func, ...) \ + static const char *FUNC_SYM(func)[] = { __VA_ARGS__ } + +#define FUNC_DECL_1(func, group) FUNC_DECL_(func, #group) +#define FUNC_DECL_2(func, one, two) FUNC_DECL_(func, #one, #two) +#define FUNC_DECL_3(func, one, two, three) FUNC_DECL_(func, #one, #two, #three) + +#define FUNC_GROUP_DECL(func, ...) \ + GROUP_DECL(func, __VA_ARGS__); \ + FUNC_DECL_(func, #func) + + +#define GPIO_PIN_DECL(pin, gpio) \ + SIG_EXPR_LIST_DECL_SESG(pin, gpio, gpio); \ + PIN_DECL_(pin, SIG_EXPR_LIST_PTR(pin, gpio)) + +struct aspeed_pin_group { + const char *name; + const unsigned int *pins; + const unsigned int npins; +}; + +#define ASPEED_PINCTRL_GROUP(name_) { \ + .name = #name_, \ + .pins = &(GROUP_SYM(name_))[0], \ + .npins = ARRAY_SIZE(GROUP_SYM(name_)), \ +} + +struct aspeed_pin_function { + const char *name; + const char *const *groups; + unsigned int ngroups; +}; + +#define ASPEED_PINCTRL_FUNC(name_, ...) { \ + .name = #name_, \ + .groups = &FUNC_SYM(name_)[0], \ + .ngroups = ARRAY_SIZE(FUNC_SYM(name_)), \ +} + +struct aspeed_pinmux_data; + +struct aspeed_pinmux_ops { + int (*eval)(struct aspeed_pinmux_data *ctx, + const struct aspeed_sig_expr *expr, bool enabled); + int (*set)(struct aspeed_pinmux_data *ctx, + const struct aspeed_sig_expr *expr, bool enabled); +}; + +struct aspeed_pinmux_data { + struct device *dev; + struct regmap *maps[ASPEED_NR_PINMUX_IPS]; + + const struct aspeed_pinmux_ops *ops; + + const struct aspeed_pin_group *groups; + const unsigned int ngroups; + + const struct aspeed_pin_function *functions; + const unsigned int nfunctions; +}; + +int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc, bool enabled, + struct regmap *map); + +int aspeed_sig_expr_eval(struct aspeed_pinmux_data *ctx, + const struct aspeed_sig_expr *expr, bool enabled); + +static inline int aspeed_sig_expr_set(struct aspeed_pinmux_data *ctx, + const struct aspeed_sig_expr *expr, + bool enabled) +{ + return ctx->ops->set(ctx, expr, enabled); +} + +#endif /* ASPEED_PINMUX_H */ |