summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/aty/mach64_ct.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/aty/mach64_ct.c')
-rw-r--r--drivers/video/fbdev/aty/mach64_ct.c651
1 files changed, 651 insertions, 0 deletions
diff --git a/drivers/video/fbdev/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c
new file mode 100644
index 000000000..e967536af
--- /dev/null
+++ b/drivers/video/fbdev/aty/mach64_ct.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * ATI Mach64 CT/VT/GT/LT Support
+ */
+
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <video/mach64.h>
+#include "atyfb.h"
+#ifdef CONFIG_PPC
+#include <asm/machdep.h>
+#endif
+
+#undef DEBUG
+
+static int aty_valid_pll_ct (const struct fb_info *info, u32 vclk_per, struct pll_ct *pll);
+static int aty_dsp_gt (const struct fb_info *info, u32 bpp, struct pll_ct *pll);
+static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per, u32 bpp, union aty_pll *pll);
+static u32 aty_pll_to_var_ct(const struct fb_info *info, const union aty_pll *pll);
+
+u8 aty_ld_pll_ct(int offset, const struct atyfb_par *par)
+{
+
+ /* write addr byte */
+ aty_st_8(CLOCK_CNTL_ADDR, (offset << 2) & PLL_ADDR, par);
+ /* read the register value */
+ return aty_ld_8(CLOCK_CNTL_DATA, par);
+}
+
+static void aty_st_pll_ct(int offset, u8 val, const struct atyfb_par *par)
+{
+ /* write addr byte */
+ aty_st_8(CLOCK_CNTL_ADDR, ((offset << 2) & PLL_ADDR) | PLL_WR_EN, par);
+ /* write the register value */
+ aty_st_8(CLOCK_CNTL_DATA, val & PLL_DATA, par);
+ aty_st_8(CLOCK_CNTL_ADDR, ((offset << 2) & PLL_ADDR) & ~PLL_WR_EN, par);
+}
+
+/*
+ * by Daniel Mantione
+ * <daniel.mantione@freepascal.org>
+ *
+ *
+ * ATI Mach64 CT clock synthesis description.
+ *
+ * All clocks on the Mach64 can be calculated using the same principle:
+ *
+ * XTALIN * x * FB_DIV
+ * CLK = ----------------------
+ * PLL_REF_DIV * POST_DIV
+ *
+ * XTALIN is a fixed speed clock. Common speeds are 14.31 MHz and 29.50 MHz.
+ * PLL_REF_DIV can be set by the user, but is the same for all clocks.
+ * FB_DIV can be set by the user for each clock individually, it should be set
+ * between 128 and 255, the chip will generate a bad clock signal for too low
+ * values.
+ * x depends on the type of clock; usually it is 2, but for the MCLK it can also
+ * be set to 4.
+ * POST_DIV can be set by the user for each clock individually, Possible values
+ * are 1,2,4,8 and for some clocks other values are available too.
+ * CLK is of course the clock speed that is generated.
+ *
+ * The Mach64 has these clocks:
+ *
+ * MCLK The clock rate of the chip
+ * XCLK The clock rate of the on-chip memory
+ * VCLK0 First pixel clock of first CRT controller
+ * VCLK1 Second pixel clock of first CRT controller
+ * VCLK2 Third pixel clock of first CRT controller
+ * VCLK3 Fourth pixel clock of first CRT controller
+ * VCLK Selected pixel clock, one of VCLK0, VCLK1, VCLK2, VCLK3
+ * V2CLK Pixel clock of the second CRT controller.
+ * SCLK Multi-purpose clock
+ *
+ * - MCLK and XCLK use the same FB_DIV
+ * - VCLK0 .. VCLK3 use the same FB_DIV
+ * - V2CLK is needed when the second CRTC is used (can be used for dualhead);
+ * i.e. CRT monitor connected to laptop has different resolution than built
+ * in LCD monitor.
+ * - SCLK is not available on all cards; it is know to exist on the Rage LT-PRO,
+ * Rage XL and Rage Mobility. It is know not to exist on the Mach64 VT.
+ * - V2CLK is not available on all cards, most likely only the Rage LT-PRO,
+ * the Rage XL and the Rage Mobility
+ *
+ * SCLK can be used to:
+ * - Clock the chip instead of MCLK
+ * - Replace XTALIN with a user defined frequency
+ * - Generate the pixel clock for the LCD monitor (instead of VCLK)
+ */
+
+ /*
+ * It can be quite hard to calculate XCLK and MCLK if they don't run at the
+ * same frequency. Luckily, until now all cards that need asynchrone clock
+ * speeds seem to have SCLK.
+ * So this driver uses SCLK to clock the chip and XCLK to clock the memory.
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * PLL programming (Mach64 CT family)
+ *
+ *
+ * This procedure sets the display fifo. The display fifo is a buffer that
+ * contains data read from the video memory that waits to be processed by
+ * the CRT controller.
+ *
+ * On the more modern Mach64 variants, the chip doesn't calculate the
+ * interval after which the display fifo has to be reloaded from memory
+ * automatically, the driver has to do it instead.
+ */
+
+#define Maximum_DSP_PRECISION 7
+const u8 aty_postdividers[8] = {1,2,4,8,3,5,6,12};
+
+static int aty_dsp_gt(const struct fb_info *info, u32 bpp, struct pll_ct *pll)
+{
+ u32 dsp_off, dsp_on, dsp_xclks;
+ u32 multiplier, divider, ras_multiplier, ras_divider, tmp;
+ u8 vshift, xshift;
+ s8 dsp_precision;
+
+ multiplier = ((u32)pll->mclk_fb_div) * pll->vclk_post_div_real;
+ divider = ((u32)pll->vclk_fb_div) * pll->xclk_ref_div;
+
+ ras_multiplier = pll->xclkmaxrasdelay;
+ ras_divider = 1;
+
+ if (bpp>=8)
+ divider = divider * (bpp >> 2);
+
+ vshift = (6 - 2) - pll->xclk_post_div; /* FIFO is 64 bits wide in accelerator mode ... */
+
+ if (bpp == 0)
+ vshift--; /* ... but only 32 bits in VGA mode. */
+
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
+ if (pll->xres != 0) {
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+
+ multiplier = multiplier * par->lcd_width;
+ divider = divider * pll->xres & ~7;
+
+ ras_multiplier = ras_multiplier * par->lcd_width;
+ ras_divider = ras_divider * pll->xres & ~7;
+ }
+#endif
+ /* If we don't do this, 32 bits for multiplier & divider won't be
+ enough in certain situations! */
+ while (((multiplier | divider) & 1) == 0) {
+ multiplier = multiplier >> 1;
+ divider = divider >> 1;
+ }
+
+ /* Determine DSP precision first */
+ tmp = ((multiplier * pll->fifo_size) << vshift) / divider;
+
+ for (dsp_precision = -5; tmp; dsp_precision++)
+ tmp >>= 1;
+ if (dsp_precision < 0)
+ dsp_precision = 0;
+ else if (dsp_precision > Maximum_DSP_PRECISION)
+ dsp_precision = Maximum_DSP_PRECISION;
+
+ xshift = 6 - dsp_precision;
+ vshift += xshift;
+
+ /* Move on to dsp_off */
+ dsp_off = ((multiplier * (pll->fifo_size - 1)) << vshift) / divider -
+ (1 << (vshift - xshift));
+
+/* if (bpp == 0)
+ dsp_on = ((multiplier * 20 << vshift) + divider) / divider;
+ else */
+ {
+ dsp_on = ((multiplier << vshift) + divider) / divider;
+ tmp = ((ras_multiplier << xshift) + ras_divider) / ras_divider;
+ if (dsp_on < tmp)
+ dsp_on = tmp;
+ dsp_on = dsp_on + (tmp * 2) + (pll->xclkpagefaultdelay << xshift);
+ }
+
+ /* Calculate rounding factor and apply it to dsp_on */
+ tmp = ((1 << (Maximum_DSP_PRECISION - dsp_precision)) - 1) >> 1;
+ dsp_on = ((dsp_on + tmp) / (tmp + 1)) * (tmp + 1);
+
+ if (dsp_on >= ((dsp_off / (tmp + 1)) * (tmp + 1))) {
+ dsp_on = dsp_off - (multiplier << vshift) / divider;
+ dsp_on = (dsp_on / (tmp + 1)) * (tmp + 1);
+ }
+
+ /* Last but not least: dsp_xclks */
+ dsp_xclks = ((multiplier << (vshift + 5)) + divider) / divider;
+
+ /* Get register values. */
+ pll->dsp_on_off = (dsp_on << 16) + dsp_off;
+ pll->dsp_config = (dsp_precision << 20) | (pll->dsp_loop_latency << 16) | dsp_xclks;
+#ifdef DEBUG
+ printk("atyfb(%s): dsp_config 0x%08x, dsp_on_off 0x%08x\n",
+ __func__, pll->dsp_config, pll->dsp_on_off);
+#endif
+ return 0;
+}
+
+static int aty_valid_pll_ct(const struct fb_info *info, u32 vclk_per, struct pll_ct *pll)
+{
+ u32 q;
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ int pllvclk;
+
+ /* FIXME: use the VTB/GTB /{3,6,12} post dividers if they're better suited */
+ q = par->ref_clk_per * pll->pll_ref_div * 4 / vclk_per;
+ if (q < 16*8 || q > 255*8) {
+ printk(KERN_CRIT "atyfb: vclk out of range\n");
+ return -EINVAL;
+ } else {
+ pll->vclk_post_div = (q < 128*8);
+ pll->vclk_post_div += (q < 64*8);
+ pll->vclk_post_div += (q < 32*8);
+ }
+ pll->vclk_post_div_real = aty_postdividers[pll->vclk_post_div];
+ // pll->vclk_post_div <<= 6;
+ pll->vclk_fb_div = q * pll->vclk_post_div_real / 8;
+ pllvclk = (1000000 * 2 * pll->vclk_fb_div) /
+ (par->ref_clk_per * pll->pll_ref_div);
+#ifdef DEBUG
+ printk("atyfb(%s): pllvclk=%d MHz, vclk=%d MHz\n",
+ __func__, pllvclk, pllvclk / pll->vclk_post_div_real);
+#endif
+ pll->pll_vclk_cntl = 0x03; /* VCLK = PLL_VCLK/VCLKx_POST */
+
+ /* Set ECP (scaler/overlay clock) divider */
+ if (par->pll_limits.ecp_max) {
+ int ecp = pllvclk / pll->vclk_post_div_real;
+ int ecp_div = 0;
+
+ while (ecp > par->pll_limits.ecp_max && ecp_div < 2) {
+ ecp >>= 1;
+ ecp_div++;
+ }
+ pll->pll_vclk_cntl |= ecp_div << 4;
+ }
+
+ return 0;
+}
+
+static int aty_var_to_pll_ct(const struct fb_info *info, u32 vclk_per, u32 bpp, union aty_pll *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ int err;
+
+ if ((err = aty_valid_pll_ct(info, vclk_per, &pll->ct)))
+ return err;
+ if (M64_HAS(GTB_DSP) && (err = aty_dsp_gt(info, bpp, &pll->ct)))
+ return err;
+ /*aty_calc_pll_ct(info, &pll->ct);*/
+ return 0;
+}
+
+static u32 aty_pll_to_var_ct(const struct fb_info *info, const union aty_pll *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u32 ret;
+ ret = par->ref_clk_per * pll->ct.pll_ref_div * pll->ct.vclk_post_div_real / pll->ct.vclk_fb_div / 2;
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
+ if(pll->ct.xres > 0) {
+ ret *= par->lcd_width;
+ ret /= pll->ct.xres;
+ }
+#endif
+#ifdef DEBUG
+ printk("atyfb(%s): calculated 0x%08X(%i)\n", __func__, ret, ret);
+#endif
+ return ret;
+}
+
+void aty_set_pll_ct(const struct fb_info *info, const union aty_pll *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u32 crtc_gen_cntl;
+ u8 tmp, tmp2;
+
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
+ u32 lcd_gen_cntrl = 0;
+#endif
+
+#ifdef DEBUG
+ printk("atyfb(%s): about to program:\n"
+ "pll_ext_cntl=0x%02x pll_gen_cntl=0x%02x pll_vclk_cntl=0x%02x\n",
+ __func__,
+ pll->ct.pll_ext_cntl, pll->ct.pll_gen_cntl, pll->ct.pll_vclk_cntl);
+
+ printk("atyfb(%s): setting clock %lu for FeedBackDivider %i, ReferenceDivider %i, PostDivider %i(%i)\n",
+ __func__,
+ par->clk_wr_offset, pll->ct.vclk_fb_div,
+ pll->ct.pll_ref_div, pll->ct.vclk_post_div, pll->ct.vclk_post_div_real);
+#endif
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
+ if (par->lcd_table != 0) {
+ /* turn off LCD */
+ lcd_gen_cntrl = aty_ld_lcd(LCD_GEN_CNTL, par);
+ aty_st_lcd(LCD_GEN_CNTL, lcd_gen_cntrl & ~LCD_ON, par);
+ }
+#endif
+ aty_st_8(CLOCK_CNTL, par->clk_wr_offset | CLOCK_STROBE, par);
+
+ /* Temporarily switch to accelerator mode */
+ crtc_gen_cntl = aty_ld_le32(CRTC_GEN_CNTL, par);
+ if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
+ aty_st_le32(CRTC_GEN_CNTL, crtc_gen_cntl | CRTC_EXT_DISP_EN, par);
+
+ /* Reset VCLK generator */
+ aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl, par);
+
+ /* Set post-divider */
+ tmp2 = par->clk_wr_offset << 1;
+ tmp = aty_ld_pll_ct(VCLK_POST_DIV, par);
+ tmp &= ~(0x03U << tmp2);
+ tmp |= ((pll->ct.vclk_post_div & 0x03U) << tmp2);
+ aty_st_pll_ct(VCLK_POST_DIV, tmp, par);
+
+ /* Set extended post-divider */
+ tmp = aty_ld_pll_ct(PLL_EXT_CNTL, par);
+ tmp &= ~(0x10U << par->clk_wr_offset);
+ tmp &= 0xF0U;
+ tmp |= pll->ct.pll_ext_cntl;
+ aty_st_pll_ct(PLL_EXT_CNTL, tmp, par);
+
+ /* Set feedback divider */
+ tmp = VCLK0_FB_DIV + par->clk_wr_offset;
+ aty_st_pll_ct(tmp, (pll->ct.vclk_fb_div & 0xFFU), par);
+
+ aty_st_pll_ct(PLL_GEN_CNTL, (pll->ct.pll_gen_cntl & (~(PLL_OVERRIDE | PLL_MCLK_RST))) | OSC_EN, par);
+
+ /* End VCLK generator reset */
+ aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl & ~(PLL_VCLK_RST), par);
+ mdelay(5);
+
+ aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
+ aty_st_pll_ct(PLL_VCLK_CNTL, pll->ct.pll_vclk_cntl, par);
+ mdelay(1);
+
+ /* Restore mode register */
+ if (!(crtc_gen_cntl & CRTC_EXT_DISP_EN))
+ aty_st_le32(CRTC_GEN_CNTL, crtc_gen_cntl, par);
+
+ if (M64_HAS(GTB_DSP)) {
+ u8 dll_cntl;
+
+ if (M64_HAS(XL_DLL))
+ dll_cntl = 0x80;
+ else if (par->ram_type >= SDRAM)
+ dll_cntl = 0xa6;
+ else
+ dll_cntl = 0xa0;
+ aty_st_pll_ct(DLL_CNTL, dll_cntl, par);
+ aty_st_pll_ct(VFC_CNTL, 0x1b, par);
+ aty_st_le32(DSP_CONFIG, pll->ct.dsp_config, par);
+ aty_st_le32(DSP_ON_OFF, pll->ct.dsp_on_off, par);
+
+ mdelay(10);
+ aty_st_pll_ct(DLL_CNTL, dll_cntl, par);
+ mdelay(10);
+ aty_st_pll_ct(DLL_CNTL, dll_cntl | 0x40, par);
+ mdelay(10);
+ aty_st_pll_ct(DLL_CNTL, dll_cntl & ~0x40, par);
+ }
+#ifdef CONFIG_FB_ATY_GENERIC_LCD
+ if (par->lcd_table != 0) {
+ /* restore LCD */
+ aty_st_lcd(LCD_GEN_CNTL, lcd_gen_cntrl, par);
+ }
+#endif
+}
+
+static void aty_get_pll_ct(const struct fb_info *info, union aty_pll *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u8 tmp, clock;
+
+ clock = aty_ld_8(CLOCK_CNTL, par) & 0x03U;
+ tmp = clock << 1;
+ pll->ct.vclk_post_div = (aty_ld_pll_ct(VCLK_POST_DIV, par) >> tmp) & 0x03U;
+
+ pll->ct.pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par) & 0x0FU;
+ pll->ct.vclk_fb_div = aty_ld_pll_ct(VCLK0_FB_DIV + clock, par) & 0xFFU;
+ pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
+ pll->ct.mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par);
+
+ pll->ct.pll_gen_cntl = aty_ld_pll_ct(PLL_GEN_CNTL, par);
+ pll->ct.pll_vclk_cntl = aty_ld_pll_ct(PLL_VCLK_CNTL, par);
+
+ if (M64_HAS(GTB_DSP)) {
+ pll->ct.dsp_config = aty_ld_le32(DSP_CONFIG, par);
+ pll->ct.dsp_on_off = aty_ld_le32(DSP_ON_OFF, par);
+ }
+}
+
+static int aty_init_pll_ct(const struct fb_info *info, union aty_pll *pll)
+{
+ struct atyfb_par *par = (struct atyfb_par *) info->par;
+ u8 mpost_div, xpost_div, sclk_post_div_real;
+ u32 q, memcntl, trp;
+ u32 dsp_config;
+#ifdef DEBUG
+ int pllmclk, pllsclk;
+#endif
+ pll->ct.pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par);
+ pll->ct.xclk_post_div = pll->ct.pll_ext_cntl & 0x07;
+ pll->ct.xclk_ref_div = 1;
+ switch (pll->ct.xclk_post_div) {
+ case 0: case 1: case 2: case 3:
+ break;
+
+ case 4:
+ pll->ct.xclk_ref_div = 3;
+ pll->ct.xclk_post_div = 0;
+ break;
+
+ default:
+ printk(KERN_CRIT "atyfb: Unsupported xclk source: %d.\n", pll->ct.xclk_post_div);
+ return -EINVAL;
+ }
+ pll->ct.mclk_fb_mult = 2;
+ if(pll->ct.pll_ext_cntl & PLL_MFB_TIMES_4_2B) {
+ pll->ct.mclk_fb_mult = 4;
+ pll->ct.xclk_post_div -= 1;
+ }
+
+#ifdef DEBUG
+ printk("atyfb(%s): mclk_fb_mult=%d, xclk_post_div=%d\n",
+ __func__, pll->ct.mclk_fb_mult, pll->ct.xclk_post_div);
+#endif
+
+ memcntl = aty_ld_le32(MEM_CNTL, par);
+ trp = (memcntl & 0x300) >> 8;
+
+ pll->ct.xclkpagefaultdelay = ((memcntl & 0xc00) >> 10) + ((memcntl & 0x1000) >> 12) + trp + 2;
+ pll->ct.xclkmaxrasdelay = ((memcntl & 0x70000) >> 16) + trp + 2;
+
+ if (M64_HAS(FIFO_32)) {
+ pll->ct.fifo_size = 32;
+ } else {
+ pll->ct.fifo_size = 24;
+ pll->ct.xclkpagefaultdelay += 2;
+ pll->ct.xclkmaxrasdelay += 3;
+ }
+
+ switch (par->ram_type) {
+ case DRAM:
+ if (info->fix.smem_len<=ONE_MB) {
+ pll->ct.dsp_loop_latency = 10;
+ } else {
+ pll->ct.dsp_loop_latency = 8;
+ pll->ct.xclkpagefaultdelay += 2;
+ }
+ break;
+ case EDO:
+ case PSEUDO_EDO:
+ if (info->fix.smem_len<=ONE_MB) {
+ pll->ct.dsp_loop_latency = 9;
+ } else {
+ pll->ct.dsp_loop_latency = 8;
+ pll->ct.xclkpagefaultdelay += 1;
+ }
+ break;
+ case SDRAM:
+ if (info->fix.smem_len<=ONE_MB) {
+ pll->ct.dsp_loop_latency = 11;
+ } else {
+ pll->ct.dsp_loop_latency = 10;
+ pll->ct.xclkpagefaultdelay += 1;
+ }
+ break;
+ case SGRAM:
+ pll->ct.dsp_loop_latency = 8;
+ pll->ct.xclkpagefaultdelay += 3;
+ break;
+ default:
+ pll->ct.dsp_loop_latency = 11;
+ pll->ct.xclkpagefaultdelay += 3;
+ break;
+ }
+
+ if (pll->ct.xclkmaxrasdelay <= pll->ct.xclkpagefaultdelay)
+ pll->ct.xclkmaxrasdelay = pll->ct.xclkpagefaultdelay + 1;
+
+ /* Allow BIOS to override */
+ dsp_config = aty_ld_le32(DSP_CONFIG, par);
+ aty_ld_le32(DSP_ON_OFF, par);
+ aty_ld_le32(VGA_DSP_CONFIG, par);
+ aty_ld_le32(VGA_DSP_ON_OFF, par);
+
+ if (dsp_config)
+ pll->ct.dsp_loop_latency = (dsp_config & DSP_LOOP_LATENCY) >> 16;
+#if 0
+ FIXME: is it relevant for us?
+ if ((!dsp_on_off && !M64_HAS(RESET_3D)) ||
+ ((dsp_on_off == vga_dsp_on_off) &&
+ (!dsp_config || !((dsp_config ^ vga_dsp_config) & DSP_XCLKS_PER_QW)))) {
+ vga_dsp_on_off &= VGA_DSP_OFF;
+ vga_dsp_config &= VGA_DSP_XCLKS_PER_QW;
+ if (ATIDivide(vga_dsp_on_off, vga_dsp_config, 5, 1) > 24)
+ pll->ct.fifo_size = 32;
+ else
+ pll->ct.fifo_size = 24;
+ }
+#endif
+ /* Exit if the user does not want us to tamper with the clock
+ rates of her chip. */
+ if (par->mclk_per == 0) {
+ u8 mclk_fb_div, pll_ext_cntl;
+ pll->ct.pll_ref_div = aty_ld_pll_ct(PLL_REF_DIV, par);
+ pll_ext_cntl = aty_ld_pll_ct(PLL_EXT_CNTL, par);
+ pll->ct.xclk_post_div_real = aty_postdividers[pll_ext_cntl & 0x07];
+ mclk_fb_div = aty_ld_pll_ct(MCLK_FB_DIV, par);
+ if (pll_ext_cntl & PLL_MFB_TIMES_4_2B)
+ mclk_fb_div <<= 1;
+ pll->ct.mclk_fb_div = mclk_fb_div;
+ return 0;
+ }
+
+ pll->ct.pll_ref_div = par->pll_per * 2 * 255 / par->ref_clk_per;
+
+ /* FIXME: use the VTB/GTB /3 post divider if it's better suited */
+ q = par->ref_clk_per * pll->ct.pll_ref_div * 8 /
+ (pll->ct.mclk_fb_mult * par->xclk_per);
+
+ if (q < 16*8 || q > 255*8) {
+ printk(KERN_CRIT "atxfb: xclk out of range\n");
+ return -EINVAL;
+ } else {
+ xpost_div = (q < 128*8);
+ xpost_div += (q < 64*8);
+ xpost_div += (q < 32*8);
+ }
+ pll->ct.xclk_post_div_real = aty_postdividers[xpost_div];
+ pll->ct.mclk_fb_div = q * pll->ct.xclk_post_div_real / 8;
+
+#ifdef CONFIG_PPC
+ if (machine_is(powermac)) {
+ /* Override PLL_EXT_CNTL & 0x07. */
+ pll->ct.xclk_post_div = xpost_div;
+ pll->ct.xclk_ref_div = 1;
+ }
+#endif
+
+#ifdef DEBUG
+ pllmclk = (1000000 * pll->ct.mclk_fb_mult * pll->ct.mclk_fb_div) /
+ (par->ref_clk_per * pll->ct.pll_ref_div);
+ printk("atyfb(%s): pllmclk=%d MHz, xclk=%d MHz\n",
+ __func__, pllmclk, pllmclk / pll->ct.xclk_post_div_real);
+#endif
+
+ if (M64_HAS(SDRAM_MAGIC_PLL) && (par->ram_type >= SDRAM))
+ pll->ct.pll_gen_cntl = OSC_EN;
+ else
+ pll->ct.pll_gen_cntl = OSC_EN | DLL_PWDN /* | FORCE_DCLK_TRI_STATE */;
+
+ if (M64_HAS(MAGIC_POSTDIV))
+ pll->ct.pll_ext_cntl = 0;
+ else
+ pll->ct.pll_ext_cntl = xpost_div;
+
+ if (pll->ct.mclk_fb_mult == 4)
+ pll->ct.pll_ext_cntl |= PLL_MFB_TIMES_4_2B;
+
+ if (par->mclk_per == par->xclk_per) {
+ pll->ct.pll_gen_cntl |= (xpost_div << 4); /* mclk == xclk */
+ } else {
+ /*
+ * The chip clock is not equal to the memory clock.
+ * Therefore we will use sclk to clock the chip.
+ */
+ pll->ct.pll_gen_cntl |= (6 << 4); /* mclk == sclk */
+
+ q = par->ref_clk_per * pll->ct.pll_ref_div * 4 / par->mclk_per;
+ if (q < 16*8 || q > 255*8) {
+ printk(KERN_CRIT "atyfb: mclk out of range\n");
+ return -EINVAL;
+ } else {
+ mpost_div = (q < 128*8);
+ mpost_div += (q < 64*8);
+ mpost_div += (q < 32*8);
+ }
+ sclk_post_div_real = aty_postdividers[mpost_div];
+ pll->ct.sclk_fb_div = q * sclk_post_div_real / 8;
+ pll->ct.spll_cntl2 = mpost_div << 4;
+#ifdef DEBUG
+ pllsclk = (1000000 * 2 * pll->ct.sclk_fb_div) /
+ (par->ref_clk_per * pll->ct.pll_ref_div);
+ printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n",
+ __func__, pllsclk, pllsclk / sclk_post_div_real);
+#endif
+ }
+
+ /* Disable the extra precision pixel clock controls since we do not use them. */
+ pll->ct.ext_vpll_cntl = aty_ld_pll_ct(EXT_VPLL_CNTL, par);
+ pll->ct.ext_vpll_cntl &= ~(EXT_VPLL_EN | EXT_VPLL_VGA_EN | EXT_VPLL_INSYNC);
+
+ return 0;
+}
+
+static void aty_resume_pll_ct(const struct fb_info *info,
+ union aty_pll *pll)
+{
+ struct atyfb_par *par = info->par;
+
+ if (par->mclk_per != par->xclk_per) {
+ /*
+ * This disables the sclk, crashes the computer as reported:
+ * aty_st_pll_ct(SPLL_CNTL2, 3, info);
+ *
+ * So it seems the sclk must be enabled before it is used;
+ * so PLL_GEN_CNTL must be programmed *after* the sclk.
+ */
+ aty_st_pll_ct(SCLK_FB_DIV, pll->ct.sclk_fb_div, par);
+ aty_st_pll_ct(SPLL_CNTL2, pll->ct.spll_cntl2, par);
+ /*
+ * SCLK has been started. Wait for the PLL to lock. 5 ms
+ * should be enough according to mach64 programmer's guide.
+ */
+ mdelay(5);
+ }
+
+ aty_st_pll_ct(PLL_REF_DIV, pll->ct.pll_ref_div, par);
+ aty_st_pll_ct(PLL_GEN_CNTL, pll->ct.pll_gen_cntl, par);
+ aty_st_pll_ct(MCLK_FB_DIV, pll->ct.mclk_fb_div, par);
+ aty_st_pll_ct(PLL_EXT_CNTL, pll->ct.pll_ext_cntl, par);
+ aty_st_pll_ct(EXT_VPLL_CNTL, pll->ct.ext_vpll_cntl, par);
+}
+
+static int dummy(void)
+{
+ return 0;
+}
+
+const struct aty_dac_ops aty_dac_ct = {
+ .set_dac = (void *) dummy,
+};
+
+const struct aty_pll_ops aty_pll_ct = {
+ .var_to_pll = aty_var_to_pll_ct,
+ .pll_to_var = aty_pll_to_var_ct,
+ .set_pll = aty_set_pll_ct,
+ .get_pll = aty_get_pll_ct,
+ .init_pll = aty_init_pll_ct,
+ .resume_pll = aty_resume_pll_ct,
+};