summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/geode/display_gx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/geode/display_gx.c')
-rw-r--r--drivers/video/fbdev/geode/display_gx.c180
1 files changed, 180 insertions, 0 deletions
diff --git a/drivers/video/fbdev/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
new file mode 100644
index 000000000..b5f25dffd
--- /dev/null
+++ b/drivers/video/fbdev/geode/display_gx.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Geode GX display controller.
+ *
+ * Copyright (C) 2005 Arcom Control Systems Ltd.
+ *
+ * Portions from AMD's original 2.4 driver:
+ * Copyright (C) 2004 Advanced Micro Devices, Inc.
+ */
+#include <linux/spinlock.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/div64.h>
+#include <asm/delay.h>
+#include <linux/cs5535.h>
+
+#include "gxfb.h"
+
+unsigned int gx_frame_buffer_size(void)
+{
+ unsigned int val;
+
+ if (!cs5535_has_vsa2()) {
+ uint32_t hi, lo;
+
+ /* The number of pages is (PMAX - PMIN)+1 */
+ rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
+
+ /* PMAX */
+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
+ /* PMIN */
+ val -= (lo & 0x000fffff);
+ val += 1;
+
+ /* The page size is 4k */
+ return (val << 12);
+ }
+
+ /* FB size can be obtained from the VSA II */
+ /* Virtual register class = 0x02 */
+ /* VG_MEM_SIZE(512Kb units) = 0x00 */
+
+ outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+ outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
+
+ val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFFl;
+ return (val << 19);
+}
+
+int gx_line_delta(int xres, int bpp)
+{
+ /* Must be a multiple of 8 bytes. */
+ return (xres * (bpp >> 3) + 7) & ~0x7;
+}
+
+void gx_set_mode(struct fb_info *info)
+{
+ struct gxfb_par *par = info->par;
+ u32 gcfg, dcfg;
+ int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+ int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+ /* Unlock the display controller registers. */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+ gcfg = read_dc(par, DC_GENERAL_CFG);
+ dcfg = read_dc(par, DC_DISPLAY_CFG);
+
+ /* Disable the timing generator. */
+ dcfg &= ~DC_DISPLAY_CFG_TGEN;
+ write_dc(par, DC_DISPLAY_CFG, dcfg);
+
+ /* Wait for pending memory requests before disabling the FIFO load. */
+ udelay(100);
+
+ /* Disable FIFO load and compression. */
+ gcfg &= ~(DC_GENERAL_CFG_DFLE | DC_GENERAL_CFG_CMPE |
+ DC_GENERAL_CFG_DECE);
+ write_dc(par, DC_GENERAL_CFG, gcfg);
+
+ /* Setup DCLK and its divisor. */
+ gx_set_dclk_frequency(info);
+
+ /*
+ * Setup new mode.
+ */
+
+ /* Clear all unused feature bits. */
+ gcfg &= DC_GENERAL_CFG_YUVM | DC_GENERAL_CFG_VDSE;
+ dcfg = 0;
+
+ /* Set FIFO priority (default 6/5) and enable. */
+ /* FIXME: increase fifo priority for 1280x1024 and higher modes? */
+ gcfg |= (6 << DC_GENERAL_CFG_DFHPEL_SHIFT) |
+ (5 << DC_GENERAL_CFG_DFHPSL_SHIFT) | DC_GENERAL_CFG_DFLE;
+
+ /* Framebuffer start offset. */
+ write_dc(par, DC_FB_ST_OFFSET, 0);
+
+ /* Line delta and line buffer length. */
+ write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
+ write_dc(par, DC_LINE_SIZE,
+ ((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2);
+
+
+ /* Enable graphics and video data and unmask address lines. */
+ dcfg |= DC_DISPLAY_CFG_GDEN | DC_DISPLAY_CFG_VDEN |
+ DC_DISPLAY_CFG_A20M | DC_DISPLAY_CFG_A18M;
+
+ /* Set pixel format. */
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
+ break;
+ case 16:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
+ break;
+ case 32:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
+ dcfg |= DC_DISPLAY_CFG_PALB;
+ break;
+ }
+
+ /* Enable timing generator. */
+ dcfg |= DC_DISPLAY_CFG_TGEN;
+
+ /* Horizontal and vertical timings. */
+ hactive = info->var.xres;
+ hblankstart = hactive;
+ hsyncstart = hblankstart + info->var.right_margin;
+ hsyncend = hsyncstart + info->var.hsync_len;
+ hblankend = hsyncend + info->var.left_margin;
+ htotal = hblankend;
+
+ vactive = info->var.yres;
+ vblankstart = vactive;
+ vsyncstart = vblankstart + info->var.lower_margin;
+ vsyncend = vsyncstart + info->var.vsync_len;
+ vblankend = vsyncend + info->var.upper_margin;
+ vtotal = vblankend;
+
+ write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) |
+ ((htotal - 1) << 16));
+ write_dc(par, DC_H_BLANK_TIMING, (hblankstart - 1) |
+ ((hblankend - 1) << 16));
+ write_dc(par, DC_H_SYNC_TIMING, (hsyncstart - 1) |
+ ((hsyncend - 1) << 16));
+
+ write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) |
+ ((vtotal - 1) << 16));
+ write_dc(par, DC_V_BLANK_TIMING, (vblankstart - 1) |
+ ((vblankend - 1) << 16));
+ write_dc(par, DC_V_SYNC_TIMING, (vsyncstart - 1) |
+ ((vsyncend - 1) << 16));
+
+ /* Write final register values. */
+ write_dc(par, DC_DISPLAY_CFG, dcfg);
+ write_dc(par, DC_GENERAL_CFG, gcfg);
+
+ gx_configure_display(info);
+
+ /* Relock display controller registers */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+void gx_set_hw_palette_reg(struct fb_info *info, unsigned regno,
+ unsigned red, unsigned green, unsigned blue)
+{
+ struct gxfb_par *par = info->par;
+ int val;
+
+ /* Hardware palette is in RGB 8-8-8 format. */
+ val = (red << 8) & 0xff0000;
+ val |= (green) & 0x00ff00;
+ val |= (blue >> 8) & 0x0000ff;
+
+ write_dc(par, DC_PAL_ADDRESS, regno);
+ write_dc(par, DC_PAL_DATA, val);
+}