summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/geode/lxfb_ops.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/geode/lxfb_ops.c')
-rw-r--r--drivers/video/fbdev/geode/lxfb_ops.c838
1 files changed, 838 insertions, 0 deletions
diff --git a/drivers/video/fbdev/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c
new file mode 100644
index 000000000..32baaf59f
--- /dev/null
+++ b/drivers/video/fbdev/geode/lxfb_ops.c
@@ -0,0 +1,838 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Geode LX framebuffer driver
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices,Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/fb.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/cs5535.h>
+
+#include "lxfb.h"
+
+/* TODO
+ * Support panel scaling
+ * Add acceleration
+ * Add support for interlacing (TV out)
+ * Support compression
+ */
+
+/* This is the complete list of PLL frequencies that we can set -
+ * we will choose the closest match to the incoming clock.
+ * freq is the frequency of the dotclock * 1000 (for example,
+ * 24823 = 24.983 Mhz).
+ * pllval is the corresponding PLL value
+*/
+
+static const struct {
+ unsigned int pllval;
+ unsigned int freq;
+} pll_table[] = {
+ { 0x000131AC, 6231 },
+ { 0x0001215D, 6294 },
+ { 0x00011087, 6750 },
+ { 0x0001216C, 7081 },
+ { 0x0001218D, 7140 },
+ { 0x000110C9, 7800 },
+ { 0x00013147, 7875 },
+ { 0x000110A7, 8258 },
+ { 0x00012159, 8778 },
+ { 0x00014249, 8875 },
+ { 0x00010057, 9000 },
+ { 0x0001219A, 9472 },
+ { 0x00012158, 9792 },
+ { 0x00010045, 10000 },
+ { 0x00010089, 10791 },
+ { 0x000110E7, 11225 },
+ { 0x00012136, 11430 },
+ { 0x00013207, 12375 },
+ { 0x00012187, 12500 },
+ { 0x00014286, 14063 },
+ { 0x000110E5, 15016 },
+ { 0x00014214, 16250 },
+ { 0x00011105, 17045 },
+ { 0x000131E4, 18563 },
+ { 0x00013183, 18750 },
+ { 0x00014284, 19688 },
+ { 0x00011104, 20400 },
+ { 0x00016363, 23625 },
+ { 0x000031AC, 24923 },
+ { 0x0000215D, 25175 },
+ { 0x00001087, 27000 },
+ { 0x0000216C, 28322 },
+ { 0x0000218D, 28560 },
+ { 0x000010C9, 31200 },
+ { 0x00003147, 31500 },
+ { 0x000010A7, 33032 },
+ { 0x00002159, 35112 },
+ { 0x00004249, 35500 },
+ { 0x00000057, 36000 },
+ { 0x0000219A, 37889 },
+ { 0x00002158, 39168 },
+ { 0x00000045, 40000 },
+ { 0x00000089, 43163 },
+ { 0x000010E7, 44900 },
+ { 0x00002136, 45720 },
+ { 0x00003207, 49500 },
+ { 0x00002187, 50000 },
+ { 0x00004286, 56250 },
+ { 0x000010E5, 60065 },
+ { 0x00004214, 65000 },
+ { 0x00001105, 68179 },
+ { 0x000031E4, 74250 },
+ { 0x00003183, 75000 },
+ { 0x00004284, 78750 },
+ { 0x00001104, 81600 },
+ { 0x00006363, 94500 },
+ { 0x00005303, 97520 },
+ { 0x00002183, 100187 },
+ { 0x00002122, 101420 },
+ { 0x00001081, 108000 },
+ { 0x00006201, 113310 },
+ { 0x00000041, 119650 },
+ { 0x000041A1, 129600 },
+ { 0x00002182, 133500 },
+ { 0x000041B1, 135000 },
+ { 0x00000051, 144000 },
+ { 0x000041E1, 148500 },
+ { 0x000062D1, 157500 },
+ { 0x000031A1, 162000 },
+ { 0x00000061, 169203 },
+ { 0x00004231, 172800 },
+ { 0x00002151, 175500 },
+ { 0x000052E1, 189000 },
+ { 0x00000071, 192000 },
+ { 0x00003201, 198000 },
+ { 0x00004291, 202500 },
+ { 0x00001101, 204750 },
+ { 0x00007481, 218250 },
+ { 0x00004170, 229500 },
+ { 0x00006210, 234000 },
+ { 0x00003140, 251182 },
+ { 0x00006250, 261000 },
+ { 0x000041C0, 278400 },
+ { 0x00005220, 280640 },
+ { 0x00000050, 288000 },
+ { 0x000041E0, 297000 },
+ { 0x00002130, 320207 }
+};
+
+
+static void lx_set_dotpll(u32 pllval)
+{
+ u32 dotpll_lo, dotpll_hi;
+ int i;
+
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+
+ if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
+ return;
+
+ dotpll_hi = pllval;
+ dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
+ dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
+
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+
+ /* Wait 100us for the PLL to lock */
+
+ udelay(100);
+
+ /* Now, loop for the lock bit */
+
+ for (i = 0; i < 1000; i++) {
+ rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+ if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
+ break;
+ }
+
+ /* Clear the reset bit */
+
+ dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
+ wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
+}
+
+/* Set the clock based on the frequency specified by the current mode */
+
+static void lx_set_clock(struct fb_info *info)
+{
+ unsigned int diff, min, best = 0;
+ unsigned int freq, i;
+
+ freq = (unsigned int) (1000000000 / info->var.pixclock);
+
+ min = abs(pll_table[0].freq - freq);
+
+ for (i = 0; i < ARRAY_SIZE(pll_table); i++) {
+ diff = abs(pll_table[i].freq - freq);
+ if (diff < min) {
+ min = diff;
+ best = i;
+ }
+ }
+
+ lx_set_dotpll(pll_table[best].pllval & 0x00017FFF);
+}
+
+static void lx_graphics_disable(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+ unsigned int val, gcfg;
+
+ /* Note: This assumes that the video is in a quitet state */
+
+ write_vp(par, VP_A1T, 0);
+ write_vp(par, VP_A2T, 0);
+ write_vp(par, VP_A3T, 0);
+
+ /* Turn off the VGA and video enable */
+ val = read_dc(par, DC_GENERAL_CFG) & ~(DC_GENERAL_CFG_VGAE |
+ DC_GENERAL_CFG_VIDE);
+
+ write_dc(par, DC_GENERAL_CFG, val);
+
+ val = read_vp(par, VP_VCFG) & ~VP_VCFG_VID_EN;
+ write_vp(par, VP_VCFG, val);
+
+ write_dc(par, DC_IRQ, DC_IRQ_MASK | DC_IRQ_VIP_VSYNC_LOSS_IRQ_MASK |
+ DC_IRQ_STATUS | DC_IRQ_VIP_VSYNC_IRQ_STATUS);
+
+ val = read_dc(par, DC_GENLK_CTL) & ~DC_GENLK_CTL_GENLK_EN;
+ write_dc(par, DC_GENLK_CTL, val);
+
+ val = read_dc(par, DC_CLR_KEY);
+ write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN);
+
+ /* turn off the panel */
+ write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P);
+
+ val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN;
+ write_vp(par, VP_MISC, val);
+
+ /* Turn off the display */
+
+ val = read_vp(par, VP_DCFG);
+ write_vp(par, VP_DCFG, val & ~(VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
+ VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN));
+
+ gcfg = read_dc(par, DC_GENERAL_CFG);
+ gcfg &= ~(DC_GENERAL_CFG_CMPE | DC_GENERAL_CFG_DECE);
+ write_dc(par, DC_GENERAL_CFG, gcfg);
+
+ /* Turn off the TGEN */
+ val = read_dc(par, DC_DISPLAY_CFG);
+ val &= ~DC_DISPLAY_CFG_TGEN;
+ write_dc(par, DC_DISPLAY_CFG, val);
+
+ /* Wait 1000 usecs to ensure that the TGEN is clear */
+ udelay(1000);
+
+ /* Turn off the FIFO loader */
+
+ gcfg &= ~DC_GENERAL_CFG_DFLE;
+ write_dc(par, DC_GENERAL_CFG, gcfg);
+
+ /* Lastly, wait for the GP to go idle */
+
+ do {
+ val = read_gp(par, GP_BLT_STATUS);
+ } while ((val & GP_BLT_STATUS_PB) || !(val & GP_BLT_STATUS_CE));
+}
+
+static void lx_graphics_enable(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+ u32 temp, config;
+
+ /* Set the video request register */
+ write_vp(par, VP_VRR, 0);
+
+ /* Set up the polarities */
+
+ config = read_vp(par, VP_DCFG);
+
+ config &= ~(VP_DCFG_CRT_SYNC_SKW | VP_DCFG_PWR_SEQ_DELAY |
+ VP_DCFG_CRT_HSYNC_POL | VP_DCFG_CRT_VSYNC_POL);
+
+ config |= (VP_DCFG_CRT_SYNC_SKW_DEFAULT | VP_DCFG_PWR_SEQ_DELAY_DEFAULT
+ | VP_DCFG_GV_GAM);
+
+ if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+ config |= VP_DCFG_CRT_HSYNC_POL;
+
+ if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+ config |= VP_DCFG_CRT_VSYNC_POL;
+
+ if (par->output & OUTPUT_PANEL) {
+ u32 msrlo, msrhi;
+
+ write_fp(par, FP_PT1, 0);
+ temp = FP_PT2_SCRC;
+
+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+ temp |= FP_PT2_HSP;
+
+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+ temp |= FP_PT2_VSP;
+
+ write_fp(par, FP_PT2, temp);
+ write_fp(par, FP_DFC, FP_DFC_BC);
+
+ msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
+ msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
+
+ wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
+ }
+
+ if (par->output & OUTPUT_CRT) {
+ config |= VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
+ VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN;
+ }
+
+ write_vp(par, VP_DCFG, config);
+
+ /* Turn the CRT dacs back on */
+
+ if (par->output & OUTPUT_CRT) {
+ temp = read_vp(par, VP_MISC);
+ temp &= ~(VP_MISC_DACPWRDN | VP_MISC_APWRDN);
+ write_vp(par, VP_MISC, temp);
+ }
+
+ /* Turn the panel on (if it isn't already) */
+ if (par->output & OUTPUT_PANEL)
+ write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P);
+}
+
+unsigned int lx_framebuffer_size(void)
+{
+ unsigned int val;
+
+ if (!cs5535_has_vsa2()) {
+ uint32_t hi, lo;
+
+ /* The number of pages is (PMAX - PMIN)+1 */
+ rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
+
+ /* PMAX */
+ val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
+ /* PMIN */
+ val -= (lo & 0x000fffff);
+ val += 1;
+
+ /* The page size is 4k */
+ return (val << 12);
+ }
+
+ /* The frame buffer size is reported by a VSM in VSA II */
+ /* Virtual Register Class = 0x02 */
+ /* VG_MEM_SIZE (1MB units) = 0x00 */
+
+ outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
+ outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
+
+ val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFE;
+ return (val << 20);
+}
+
+void lx_set_mode(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+ u64 msrval;
+
+ unsigned int max, dv, val, size;
+
+ unsigned int gcfg, dcfg;
+ int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
+ int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
+
+ /* Unlock the DC registers */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+ lx_graphics_disable(info);
+
+ lx_set_clock(info);
+
+ /* Set output mode */
+
+ rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
+
+ if (par->output & OUTPUT_PANEL) {
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
+
+ if (par->output & OUTPUT_CRT)
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
+ else
+ msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
+ } else
+ msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
+
+ wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
+
+ /* Clear the various buffers */
+ /* FIXME: Adjust for panning here */
+
+ write_dc(par, DC_FB_ST_OFFSET, 0);
+ write_dc(par, DC_CB_ST_OFFSET, 0);
+ write_dc(par, DC_CURS_ST_OFFSET, 0);
+
+ /* FIXME: Add support for interlacing */
+ /* FIXME: Add support for scaling */
+
+ val = read_dc(par, DC_GENLK_CTL);
+ val &= ~(DC_GENLK_CTL_ALPHA_FLICK_EN | DC_GENLK_CTL_FLICK_EN |
+ DC_GENLK_CTL_FLICK_SEL_MASK);
+
+ /* Default scaling params */
+
+ write_dc(par, DC_GFX_SCALE, (0x4000 << 16) | 0x4000);
+ write_dc(par, DC_IRQ_FILT_CTL, 0);
+ write_dc(par, DC_GENLK_CTL, val);
+
+ /* FIXME: Support compression */
+
+ if (info->fix.line_length > 4096)
+ dv = DC_DV_CTL_DV_LINE_SIZE_8K;
+ else if (info->fix.line_length > 2048)
+ dv = DC_DV_CTL_DV_LINE_SIZE_4K;
+ else if (info->fix.line_length > 1024)
+ dv = DC_DV_CTL_DV_LINE_SIZE_2K;
+ else
+ dv = DC_DV_CTL_DV_LINE_SIZE_1K;
+
+ max = info->fix.line_length * info->var.yres;
+ max = (max + 0x3FF) & 0xFFFFFC00;
+
+ write_dc(par, DC_DV_TOP, max | DC_DV_TOP_DV_TOP_EN);
+
+ val = read_dc(par, DC_DV_CTL) & ~DC_DV_CTL_DV_LINE_SIZE;
+ write_dc(par, DC_DV_CTL, val | dv);
+
+ size = info->var.xres * (info->var.bits_per_pixel >> 3);
+
+ write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
+ write_dc(par, DC_LINE_SIZE, (size + 7) >> 3);
+
+ /* Set default watermark values */
+
+ rdmsrl(MSR_LX_SPARE_MSR, msrval);
+
+ msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
+ | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
+ | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
+ | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
+ msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
+ MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
+ wrmsrl(MSR_LX_SPARE_MSR, msrval);
+
+ gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */
+ gcfg |= (0x6 << DC_GENERAL_CFG_DFHPSL_SHIFT) | /* default priority */
+ (0xb << DC_GENERAL_CFG_DFHPEL_SHIFT);
+ gcfg |= DC_GENERAL_CFG_FDTY; /* Set the frame dirty mode */
+
+ dcfg = DC_DISPLAY_CFG_VDEN; /* Enable video data */
+ dcfg |= DC_DISPLAY_CFG_GDEN; /* Enable graphics */
+ dcfg |= DC_DISPLAY_CFG_TGEN; /* Turn on the timing generator */
+ dcfg |= DC_DISPLAY_CFG_TRUP; /* Update timings immediately */
+ dcfg |= DC_DISPLAY_CFG_PALB; /* Palette bypass in > 8 bpp modes */
+ dcfg |= DC_DISPLAY_CFG_VISL;
+ dcfg |= DC_DISPLAY_CFG_DCEN; /* Always center the display */
+
+ /* Set the current BPP mode */
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
+ break;
+
+ case 16:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
+ break;
+
+ case 32:
+ case 24:
+ dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
+ break;
+ }
+
+ /* Now - set up the timings */
+
+ hactive = info->var.xres;
+ hblankstart = hactive;
+ hsyncstart = hblankstart + info->var.right_margin;
+ hsyncend = hsyncstart + info->var.hsync_len;
+ hblankend = hsyncend + info->var.left_margin;
+ htotal = hblankend;
+
+ vactive = info->var.yres;
+ vblankstart = vactive;
+ vsyncstart = vblankstart + info->var.lower_margin;
+ vsyncend = vsyncstart + info->var.vsync_len;
+ vblankend = vsyncend + info->var.upper_margin;
+ vtotal = vblankend;
+
+ write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | ((htotal - 1) << 16));
+ write_dc(par, DC_H_BLANK_TIMING,
+ (hblankstart - 1) | ((hblankend - 1) << 16));
+ write_dc(par, DC_H_SYNC_TIMING,
+ (hsyncstart - 1) | ((hsyncend - 1) << 16));
+
+ write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | ((vtotal - 1) << 16));
+ write_dc(par, DC_V_BLANK_TIMING,
+ (vblankstart - 1) | ((vblankend - 1) << 16));
+ write_dc(par, DC_V_SYNC_TIMING,
+ (vsyncstart - 1) | ((vsyncend - 1) << 16));
+
+ write_dc(par, DC_FB_ACTIVE,
+ (info->var.xres - 1) << 16 | (info->var.yres - 1));
+
+ /* And re-enable the graphics output */
+ lx_graphics_enable(info);
+
+ /* Write the two main configuration registers */
+ write_dc(par, DC_DISPLAY_CFG, dcfg);
+ write_dc(par, DC_ARB_CFG, 0);
+ write_dc(par, DC_GENERAL_CFG, gcfg);
+
+ /* Lock the DC registers */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+void lx_set_palette_reg(struct fb_info *info, unsigned regno,
+ unsigned red, unsigned green, unsigned blue)
+{
+ struct lxfb_par *par = info->par;
+ int val;
+
+ /* Hardware palette is in RGB 8-8-8 format. */
+
+ val = (red << 8) & 0xff0000;
+ val |= (green) & 0x00ff00;
+ val |= (blue >> 8) & 0x0000ff;
+
+ write_dc(par, DC_PAL_ADDRESS, regno);
+ write_dc(par, DC_PAL_DATA, val);
+}
+
+int lx_blank_display(struct fb_info *info, int blank_mode)
+{
+ struct lxfb_par *par = info->par;
+ u32 dcfg, misc, fp_pm;
+ int blank, hsync, vsync;
+
+ /* CRT power saving modes. */
+ switch (blank_mode) {
+ case FB_BLANK_UNBLANK:
+ blank = 0; hsync = 1; vsync = 1;
+ break;
+ case FB_BLANK_NORMAL:
+ blank = 1; hsync = 1; vsync = 1;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ blank = 1; hsync = 1; vsync = 0;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ blank = 1; hsync = 0; vsync = 1;
+ break;
+ case FB_BLANK_POWERDOWN:
+ blank = 1; hsync = 0; vsync = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dcfg = read_vp(par, VP_DCFG);
+ dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN |
+ VP_DCFG_CRT_EN);
+ if (!blank)
+ dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN;
+ if (hsync)
+ dcfg |= VP_DCFG_HSYNC_EN;
+ if (vsync)
+ dcfg |= VP_DCFG_VSYNC_EN;
+
+ write_vp(par, VP_DCFG, dcfg);
+
+ misc = read_vp(par, VP_MISC);
+
+ if (vsync && hsync)
+ misc &= ~VP_MISC_DACPWRDN;
+ else
+ misc |= VP_MISC_DACPWRDN;
+
+ write_vp(par, VP_MISC, misc);
+
+ /* Power on/off flat panel */
+
+ if (par->output & OUTPUT_PANEL) {
+ fp_pm = read_fp(par, FP_PM);
+ if (blank_mode == FB_BLANK_POWERDOWN)
+ fp_pm &= ~FP_PM_P;
+ else
+ fp_pm |= FP_PM_P;
+ write_fp(par, FP_PM, fp_pm);
+ }
+
+ return 0;
+}
+
+static void lx_save_regs(struct lxfb_par *par)
+{
+ uint32_t filt;
+ int i;
+
+ /* wait for the BLT engine to stop being busy */
+ do {
+ i = read_gp(par, GP_BLT_STATUS);
+ } while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE));
+
+ /* save MSRs */
+ rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
+ rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
+ rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
+ rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
+
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+
+ /* save registers */
+ memcpy(par->gp, par->gp_regs, sizeof(par->gp));
+ memcpy(par->dc, par->dc_regs, sizeof(par->dc));
+ memcpy(par->vp, par->vp_regs, sizeof(par->vp));
+ memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
+
+ /* save the display controller palette */
+ write_dc(par, DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ par->vp_pal[i] = read_vp(par, VP_PDR);
+
+ /* save the horizontal filter coefficients */
+ filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1);
+ par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2);
+ }
+
+ /* save the vertical filter coefficients */
+ filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1);
+ }
+
+ /* save video coeff ram */
+ memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff));
+}
+
+static void lx_restore_gfx_proc(struct lxfb_par *par)
+{
+ int i;
+
+ /* a bunch of registers require GP_RASTER_MODE to be set first */
+ write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]);
+
+ for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
+ switch (i) {
+ case GP_RASTER_MODE:
+ case GP_VECTOR_MODE:
+ case GP_BLT_MODE:
+ case GP_BLT_STATUS:
+ case GP_HST_SRC:
+ /* FIXME: restore LUT data */
+ case GP_LUT_INDEX:
+ case GP_LUT_DATA:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_gp(par, i, par->gp[i]);
+ }
+ }
+}
+
+static void lx_restore_display_ctlr(struct lxfb_par *par)
+{
+ uint32_t filt;
+ int i;
+
+ wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
+
+ for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
+ switch (i) {
+ case DC_UNLOCK:
+ /* unlock the DC; runs first */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
+ break;
+
+ case DC_GENERAL_CFG:
+ case DC_DISPLAY_CFG:
+ /* disable all while restoring */
+ write_dc(par, i, 0);
+ break;
+
+ case DC_DV_CTL:
+ /* set all ram to dirty */
+ write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM);
+ break;
+
+ case DC_RSVD_1:
+ case DC_RSVD_2:
+ case DC_RSVD_3:
+ case DC_LINE_CNT:
+ case DC_PAL_ADDRESS:
+ case DC_PAL_DATA:
+ case DC_DFIFO_DIAG:
+ case DC_CFIFO_DIAG:
+ case DC_FILT_COEFF1:
+ case DC_FILT_COEFF2:
+ case DC_RSVD_4:
+ case DC_RSVD_5:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_dc(par, i, par->dc[i]);
+ }
+ }
+
+ /* restore the palette */
+ write_dc(par, DC_PAL_ADDRESS, 0);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
+
+ /* restore the horizontal filter coefficients */
+ filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]);
+ write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]);
+ }
+
+ /* restore the vertical filter coefficients */
+ filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
+ for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
+ write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
+ write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]);
+ }
+}
+
+static void lx_restore_video_proc(struct lxfb_par *par)
+{
+ int i;
+
+ wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
+ wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
+
+ for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
+ switch (i) {
+ case VP_VCFG:
+ case VP_DCFG:
+ case VP_PAR:
+ case VP_PDR:
+ case VP_CCS:
+ case VP_RSVD_0:
+ /* case VP_VDC: */ /* why should this not be restored? */
+ case VP_RSVD_1:
+ case VP_CRC32:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_vp(par, i, par->vp[i]);
+ }
+ }
+
+ /* restore video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ write_vp(par, VP_PDR, par->vp_pal[i]);
+
+ /* restore video coeff ram */
+ memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
+}
+
+static void lx_restore_regs(struct lxfb_par *par)
+{
+ int i;
+
+ lx_set_dotpll((u32) (par->msr.dotpll >> 32));
+ lx_restore_gfx_proc(par);
+ lx_restore_display_ctlr(par);
+ lx_restore_video_proc(par);
+
+ /* Flat Panel */
+ for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
+ switch (i) {
+ case FP_PM:
+ case FP_RSVD_0:
+ case FP_RSVD_1:
+ case FP_RSVD_2:
+ case FP_RSVD_3:
+ case FP_RSVD_4:
+ /* don't restore these registers */
+ break;
+
+ default:
+ write_fp(par, i, par->fp[i]);
+ }
+ }
+
+ /* control the panel */
+ if (par->fp[FP_PM] & FP_PM_P) {
+ /* power on the panel if not already power{ed,ing} on */
+ if (!(read_fp(par, FP_PM) &
+ (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
+ write_fp(par, FP_PM, par->fp[FP_PM]);
+ } else {
+ /* power down the panel if not already power{ed,ing} down */
+ if (!(read_fp(par, FP_PM) &
+ (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
+ write_fp(par, FP_PM, par->fp[FP_PM]);
+ }
+
+ /* turn everything on */
+ write_vp(par, VP_VCFG, par->vp[VP_VCFG]);
+ write_vp(par, VP_DCFG, par->vp[VP_DCFG]);
+ write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
+ /* do this last; it will enable the FIFO load */
+ write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
+
+ /* lock the door behind us */
+ write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
+}
+
+int lx_powerdown(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+
+ if (par->powered_down)
+ return 0;
+
+ lx_save_regs(par);
+ lx_graphics_disable(info);
+
+ par->powered_down = 1;
+ return 0;
+}
+
+int lx_powerup(struct fb_info *info)
+{
+ struct lxfb_par *par = info->par;
+
+ if (!par->powered_down)
+ return 0;
+
+ lx_restore_regs(par);
+
+ par->powered_down = 0;
+ return 0;
+}