summaryrefslogtreecommitdiffstats
path: root/drivers/video/fbdev/intelfb/intelfbhw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/fbdev/intelfb/intelfbhw.c')
-rw-r--r--drivers/video/fbdev/intelfb/intelfbhw.c2115
1 files changed, 2115 insertions, 0 deletions
diff --git a/drivers/video/fbdev/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
new file mode 100644
index 000000000..2086e0653
--- /dev/null
+++ b/drivers/video/fbdev/intelfb/intelfbhw.c
@@ -0,0 +1,2115 @@
+/*
+ * intelfb
+ *
+ * Linux framebuffer driver for Intel(R) 865G integrated graphics chips.
+ *
+ * Copyright © 2002, 2003 David Dawes <dawes@xfree86.org>
+ * 2004 Sylvain Meyer
+ *
+ * This driver consists of two parts. The first part (intelfbdrv.c) provides
+ * the basic fbdev interfaces, is derived in part from the radeonfb and
+ * vesafb drivers, and is covered by the GPL. The second part (intelfbhw.c)
+ * provides the code to program the hardware. Most of it is derived from
+ * the i810/i830 XFree86 driver. The HW-specific code is covered here
+ * under a dual license (GPL and MIT/XFree86 license).
+ *
+ * Author: David Dawes
+ *
+ */
+
+/* $DHD: intelfb/intelfbhw.c,v 1.9 2003/06/27 15:06:25 dawes Exp $ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+
+#include "intelfb.h"
+#include "intelfbhw.h"
+
+struct pll_min_max {
+ int min_m, max_m, min_m1, max_m1;
+ int min_m2, max_m2, min_n, max_n;
+ int min_p, max_p, min_p1, max_p1;
+ int min_vco, max_vco, p_transition_clk, ref_clk;
+ int p_inc_lo, p_inc_hi;
+};
+
+#define PLLS_I8xx 0
+#define PLLS_I9xx 1
+#define PLLS_MAX 2
+
+static struct pll_min_max plls[PLLS_MAX] = {
+ { 108, 140, 18, 26,
+ 6, 16, 3, 16,
+ 4, 128, 0, 31,
+ 930000, 1400000, 165000, 48000,
+ 4, 2 }, /* I8xx */
+
+ { 75, 120, 10, 20,
+ 5, 9, 4, 7,
+ 5, 80, 1, 8,
+ 1400000, 2800000, 200000, 96000,
+ 10, 5 } /* I9xx */
+};
+
+int intelfbhw_get_chipset(struct pci_dev *pdev, struct intelfb_info *dinfo)
+{
+ u32 tmp;
+ if (!pdev || !dinfo)
+ return 1;
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_830M:
+ dinfo->name = "Intel(R) 830M";
+ dinfo->chipset = INTEL_830M;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I8xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_845G:
+ dinfo->name = "Intel(R) 845G";
+ dinfo->chipset = INTEL_845G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I8xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_85XGM:
+ tmp = 0;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I8xx;
+ pci_read_config_dword(pdev, INTEL_85X_CAPID, &tmp);
+ switch ((tmp >> INTEL_85X_VARIANT_SHIFT) &
+ INTEL_85X_VARIANT_MASK) {
+ case INTEL_VAR_855GME:
+ dinfo->name = "Intel(R) 855GME";
+ dinfo->chipset = INTEL_855GME;
+ return 0;
+ case INTEL_VAR_855GM:
+ dinfo->name = "Intel(R) 855GM";
+ dinfo->chipset = INTEL_855GM;
+ return 0;
+ case INTEL_VAR_852GME:
+ dinfo->name = "Intel(R) 852GME";
+ dinfo->chipset = INTEL_852GME;
+ return 0;
+ case INTEL_VAR_852GM:
+ dinfo->name = "Intel(R) 852GM";
+ dinfo->chipset = INTEL_852GM;
+ return 0;
+ default:
+ dinfo->name = "Intel(R) 852GM/855GM";
+ dinfo->chipset = INTEL_85XGM;
+ return 0;
+ }
+ break;
+ case PCI_DEVICE_ID_INTEL_865G:
+ dinfo->name = "Intel(R) 865G";
+ dinfo->chipset = INTEL_865G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I8xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_915G:
+ dinfo->name = "Intel(R) 915G";
+ dinfo->chipset = INTEL_915G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_915GM:
+ dinfo->name = "Intel(R) 915GM";
+ dinfo->chipset = INTEL_915GM;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_945G:
+ dinfo->name = "Intel(R) 945G";
+ dinfo->chipset = INTEL_945G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_945GM:
+ dinfo->name = "Intel(R) 945GM";
+ dinfo->chipset = INTEL_945GM;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_945GME:
+ dinfo->name = "Intel(R) 945GME";
+ dinfo->chipset = INTEL_945GME;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_965G:
+ dinfo->name = "Intel(R) 965G";
+ dinfo->chipset = INTEL_965G;
+ dinfo->mobile = 0;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ case PCI_DEVICE_ID_INTEL_965GM:
+ dinfo->name = "Intel(R) 965GM";
+ dinfo->chipset = INTEL_965GM;
+ dinfo->mobile = 1;
+ dinfo->pll_index = PLLS_I9xx;
+ return 0;
+ default:
+ return 1;
+ }
+}
+
+int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
+ int *stolen_size)
+{
+ struct pci_dev *bridge_dev;
+ u16 tmp;
+ int stolen_overhead;
+
+ if (!pdev || !aperture_size || !stolen_size)
+ return 1;
+
+ /* Find the bridge device. It is always 0:0.0 */
+ bridge_dev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 0,
+ PCI_DEVFN(0, 0));
+ if (!bridge_dev) {
+ ERR_MSG("cannot find bridge device\n");
+ return 1;
+ }
+
+ /* Get the fb aperture size and "stolen" memory amount. */
+ tmp = 0;
+ pci_read_config_word(bridge_dev, INTEL_GMCH_CTRL, &tmp);
+ pci_dev_put(bridge_dev);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_915G:
+ case PCI_DEVICE_ID_INTEL_915GM:
+ case PCI_DEVICE_ID_INTEL_945G:
+ case PCI_DEVICE_ID_INTEL_945GM:
+ case PCI_DEVICE_ID_INTEL_945GME:
+ case PCI_DEVICE_ID_INTEL_965G:
+ case PCI_DEVICE_ID_INTEL_965GM:
+ /*
+ * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+ * aperture. Determine size from PCI resource length.
+ */
+ *aperture_size = pci_resource_len(pdev, 2);
+ break;
+ default:
+ if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)
+ *aperture_size = MB(64);
+ else
+ *aperture_size = MB(128);
+ break;
+ }
+
+ /* Stolen memory size is reduced by the GTT and the popup.
+ GTT is 1K per MB of aperture size, and popup is 4K. */
+ stolen_overhead = (*aperture_size / MB(1)) + 4;
+ switch(pdev->device) {
+ case PCI_DEVICE_ID_INTEL_830M:
+ case PCI_DEVICE_ID_INTEL_845G:
+ switch (tmp & INTEL_830_GMCH_GMS_MASK) {
+ case INTEL_830_GMCH_GMS_STOLEN_512:
+ *stolen_size = KB(512) - KB(stolen_overhead);
+ return 0;
+ case INTEL_830_GMCH_GMS_STOLEN_1024:
+ *stolen_size = MB(1) - KB(stolen_overhead);
+ return 0;
+ case INTEL_830_GMCH_GMS_STOLEN_8192:
+ *stolen_size = MB(8) - KB(stolen_overhead);
+ return 0;
+ case INTEL_830_GMCH_GMS_LOCAL:
+ ERR_MSG("only local memory found\n");
+ return 1;
+ case INTEL_830_GMCH_GMS_DISABLED:
+ ERR_MSG("video memory is disabled\n");
+ return 1;
+ default:
+ ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
+ tmp & INTEL_830_GMCH_GMS_MASK);
+ return 1;
+ }
+ break;
+ default:
+ switch (tmp & INTEL_855_GMCH_GMS_MASK) {
+ case INTEL_855_GMCH_GMS_STOLEN_1M:
+ *stolen_size = MB(1) - KB(stolen_overhead);
+ return 0;
+ case INTEL_855_GMCH_GMS_STOLEN_4M:
+ *stolen_size = MB(4) - KB(stolen_overhead);
+ return 0;
+ case INTEL_855_GMCH_GMS_STOLEN_8M:
+ *stolen_size = MB(8) - KB(stolen_overhead);
+ return 0;
+ case INTEL_855_GMCH_GMS_STOLEN_16M:
+ *stolen_size = MB(16) - KB(stolen_overhead);
+ return 0;
+ case INTEL_855_GMCH_GMS_STOLEN_32M:
+ *stolen_size = MB(32) - KB(stolen_overhead);
+ return 0;
+ case INTEL_915G_GMCH_GMS_STOLEN_48M:
+ *stolen_size = MB(48) - KB(stolen_overhead);
+ return 0;
+ case INTEL_915G_GMCH_GMS_STOLEN_64M:
+ *stolen_size = MB(64) - KB(stolen_overhead);
+ return 0;
+ case INTEL_855_GMCH_GMS_DISABLED:
+ ERR_MSG("video memory is disabled\n");
+ return 0;
+ default:
+ ERR_MSG("unexpected GMCH_GMS value: 0x%02x\n",
+ tmp & INTEL_855_GMCH_GMS_MASK);
+ return 1;
+ }
+ }
+}
+
+int intelfbhw_check_non_crt(struct intelfb_info *dinfo)
+{
+ int dvo = 0;
+
+ if (INREG(LVDS) & PORT_ENABLE)
+ dvo |= LVDS_PORT;
+ if (INREG(DVOA) & PORT_ENABLE)
+ dvo |= DVOA_PORT;
+ if (INREG(DVOB) & PORT_ENABLE)
+ dvo |= DVOB_PORT;
+ if (INREG(DVOC) & PORT_ENABLE)
+ dvo |= DVOC_PORT;
+
+ return dvo;
+}
+
+const char * intelfbhw_dvo_to_string(int dvo)
+{
+ if (dvo & DVOA_PORT)
+ return "DVO port A";
+ else if (dvo & DVOB_PORT)
+ return "DVO port B";
+ else if (dvo & DVOC_PORT)
+ return "DVO port C";
+ else if (dvo & LVDS_PORT)
+ return "LVDS port";
+ else
+ return NULL;
+}
+
+
+int intelfbhw_validate_mode(struct intelfb_info *dinfo,
+ struct fb_var_screeninfo *var)
+{
+ int bytes_per_pixel;
+ int tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_validate_mode\n");
+#endif
+
+ bytes_per_pixel = var->bits_per_pixel / 8;
+ if (bytes_per_pixel == 3)
+ bytes_per_pixel = 4;
+
+ /* Check if enough video memory. */
+ tmp = var->yres_virtual * var->xres_virtual * bytes_per_pixel;
+ if (tmp > dinfo->fb.size) {
+ WRN_MSG("Not enough video ram for mode "
+ "(%d KByte vs %d KByte).\n",
+ BtoKB(tmp), BtoKB(dinfo->fb.size));
+ return 1;
+ }
+
+ /* Check if x/y limits are OK. */
+ if (var->xres - 1 > HACTIVE_MASK) {
+ WRN_MSG("X resolution too large (%d vs %d).\n",
+ var->xres, HACTIVE_MASK + 1);
+ return 1;
+ }
+ if (var->yres - 1 > VACTIVE_MASK) {
+ WRN_MSG("Y resolution too large (%d vs %d).\n",
+ var->yres, VACTIVE_MASK + 1);
+ return 1;
+ }
+ if (var->xres < 4) {
+ WRN_MSG("X resolution too small (%d vs 4).\n", var->xres);
+ return 1;
+ }
+ if (var->yres < 4) {
+ WRN_MSG("Y resolution too small (%d vs 4).\n", var->yres);
+ return 1;
+ }
+
+ /* Check for doublescan modes. */
+ if (var->vmode & FB_VMODE_DOUBLE) {
+ WRN_MSG("Mode is double-scan.\n");
+ return 1;
+ }
+
+ if ((var->vmode & FB_VMODE_INTERLACED) && (var->yres & 1)) {
+ WRN_MSG("Odd number of lines in interlaced mode\n");
+ return 1;
+ }
+
+ /* Check if clock is OK. */
+ tmp = 1000000000 / var->pixclock;
+ if (tmp < MIN_CLOCK) {
+ WRN_MSG("Pixel clock is too low (%d MHz vs %d MHz).\n",
+ (tmp + 500) / 1000, MIN_CLOCK / 1000);
+ return 1;
+ }
+ if (tmp > MAX_CLOCK) {
+ WRN_MSG("Pixel clock is too high (%d MHz vs %d MHz).\n",
+ (tmp + 500) / 1000, MAX_CLOCK / 1000);
+ return 1;
+ }
+
+ return 0;
+}
+
+int intelfbhw_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct intelfb_info *dinfo = GET_DINFO(info);
+ u32 offset, xoffset, yoffset;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_pan_display\n");
+#endif
+
+ xoffset = ROUND_DOWN_TO(var->xoffset, 8);
+ yoffset = var->yoffset;
+
+ if ((xoffset + info->var.xres > info->var.xres_virtual) ||
+ (yoffset + info->var.yres > info->var.yres_virtual))
+ return -EINVAL;
+
+ offset = (yoffset * dinfo->pitch) +
+ (xoffset * info->var.bits_per_pixel) / 8;
+
+ offset += dinfo->fb.offset << 12;
+
+ dinfo->vsync.pan_offset = offset;
+ if ((var->activate & FB_ACTIVATE_VBL) &&
+ !intelfbhw_enable_irq(dinfo))
+ dinfo->vsync.pan_display = 1;
+ else {
+ dinfo->vsync.pan_display = 0;
+ OUTREG(DSPABASE, offset);
+ }
+
+ return 0;
+}
+
+/* Blank the screen. */
+void intelfbhw_do_blank(int blank, struct fb_info *info)
+{
+ struct intelfb_info *dinfo = GET_DINFO(info);
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_do_blank: blank is %d\n", blank);
+#endif
+
+ /* Turn plane A on or off */
+ tmp = INREG(DSPACNTR);
+ if (blank)
+ tmp &= ~DISPPLANE_PLANE_ENABLE;
+ else
+ tmp |= DISPPLANE_PLANE_ENABLE;
+ OUTREG(DSPACNTR, tmp);
+ /* Flush */
+ tmp = INREG(DSPABASE);
+ OUTREG(DSPABASE, tmp);
+
+ /* Turn off/on the HW cursor */
+#if VERBOSE > 0
+ DBG_MSG("cursor_on is %d\n", dinfo->cursor_on);
+#endif
+ if (dinfo->cursor_on) {
+ if (blank)
+ intelfbhw_cursor_hide(dinfo);
+ else
+ intelfbhw_cursor_show(dinfo);
+ dinfo->cursor_on = 1;
+ }
+ dinfo->cursor_blanked = blank;
+
+ /* Set DPMS level */
+ tmp = INREG(ADPA) & ~ADPA_DPMS_CONTROL_MASK;
+ switch (blank) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ tmp |= ADPA_DPMS_D0;
+ break;
+ case FB_BLANK_VSYNC_SUSPEND:
+ tmp |= ADPA_DPMS_D1;
+ break;
+ case FB_BLANK_HSYNC_SUSPEND:
+ tmp |= ADPA_DPMS_D2;
+ break;
+ case FB_BLANK_POWERDOWN:
+ tmp |= ADPA_DPMS_D3;
+ break;
+ }
+ OUTREG(ADPA, tmp);
+
+ return;
+}
+
+
+/* Check which pipe is connected to an active display plane. */
+int intelfbhw_active_pipe(const struct intelfb_hwstate *hw)
+{
+ int pipe = -1;
+
+ /* keep old default behaviour - prefer PIPE_A */
+ if (hw->disp_b_ctrl & DISPPLANE_PLANE_ENABLE) {
+ pipe = (hw->disp_b_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
+ pipe &= PIPE_MASK;
+ if (unlikely(pipe == PIPE_A))
+ return PIPE_A;
+ }
+ if (hw->disp_a_ctrl & DISPPLANE_PLANE_ENABLE) {
+ pipe = (hw->disp_a_ctrl >> DISPPLANE_SEL_PIPE_SHIFT);
+ pipe &= PIPE_MASK;
+ if (likely(pipe == PIPE_A))
+ return PIPE_A;
+ }
+ /* Impossible that no pipe is selected - return PIPE_A */
+ WARN_ON(pipe == -1);
+ if (unlikely(pipe == -1))
+ pipe = PIPE_A;
+
+ return pipe;
+}
+
+void intelfbhw_setcolreg(struct intelfb_info *dinfo, unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp)
+{
+ u32 palette_reg = (dinfo->pipe == PIPE_A) ?
+ PALETTE_A : PALETTE_B;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_setcolreg: %d: (%d, %d, %d)\n",
+ regno, red, green, blue);
+#endif
+
+ OUTREG(palette_reg + (regno << 2),
+ (red << PALETTE_8_RED_SHIFT) |
+ (green << PALETTE_8_GREEN_SHIFT) |
+ (blue << PALETTE_8_BLUE_SHIFT));
+}
+
+
+int intelfbhw_read_hw_state(struct intelfb_info *dinfo,
+ struct intelfb_hwstate *hw, int flag)
+{
+ int i;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_read_hw_state\n");
+#endif
+
+ if (!hw || !dinfo)
+ return -1;
+
+ /* Read in as much of the HW state as possible. */
+ hw->vga0_divisor = INREG(VGA0_DIVISOR);
+ hw->vga1_divisor = INREG(VGA1_DIVISOR);
+ hw->vga_pd = INREG(VGAPD);
+ hw->dpll_a = INREG(DPLL_A);
+ hw->dpll_b = INREG(DPLL_B);
+ hw->fpa0 = INREG(FPA0);
+ hw->fpa1 = INREG(FPA1);
+ hw->fpb0 = INREG(FPB0);
+ hw->fpb1 = INREG(FPB1);
+
+ if (flag == 1)
+ return flag;
+
+#if 0
+ /* This seems to be a problem with the 852GM/855GM */
+ for (i = 0; i < PALETTE_8_ENTRIES; i++) {
+ hw->palette_a[i] = INREG(PALETTE_A + (i << 2));
+ hw->palette_b[i] = INREG(PALETTE_B + (i << 2));
+ }
+#endif
+
+ if (flag == 2)
+ return flag;
+
+ hw->htotal_a = INREG(HTOTAL_A);
+ hw->hblank_a = INREG(HBLANK_A);
+ hw->hsync_a = INREG(HSYNC_A);
+ hw->vtotal_a = INREG(VTOTAL_A);
+ hw->vblank_a = INREG(VBLANK_A);
+ hw->vsync_a = INREG(VSYNC_A);
+ hw->src_size_a = INREG(SRC_SIZE_A);
+ hw->bclrpat_a = INREG(BCLRPAT_A);
+ hw->htotal_b = INREG(HTOTAL_B);
+ hw->hblank_b = INREG(HBLANK_B);
+ hw->hsync_b = INREG(HSYNC_B);
+ hw->vtotal_b = INREG(VTOTAL_B);
+ hw->vblank_b = INREG(VBLANK_B);
+ hw->vsync_b = INREG(VSYNC_B);
+ hw->src_size_b = INREG(SRC_SIZE_B);
+ hw->bclrpat_b = INREG(BCLRPAT_B);
+
+ if (flag == 3)
+ return flag;
+
+ hw->adpa = INREG(ADPA);
+ hw->dvoa = INREG(DVOA);
+ hw->dvob = INREG(DVOB);
+ hw->dvoc = INREG(DVOC);
+ hw->dvoa_srcdim = INREG(DVOA_SRCDIM);
+ hw->dvob_srcdim = INREG(DVOB_SRCDIM);
+ hw->dvoc_srcdim = INREG(DVOC_SRCDIM);
+ hw->lvds = INREG(LVDS);
+
+ if (flag == 4)
+ return flag;
+
+ hw->pipe_a_conf = INREG(PIPEACONF);
+ hw->pipe_b_conf = INREG(PIPEBCONF);
+ hw->disp_arb = INREG(DISPARB);
+
+ if (flag == 5)
+ return flag;
+
+ hw->cursor_a_control = INREG(CURSOR_A_CONTROL);
+ hw->cursor_b_control = INREG(CURSOR_B_CONTROL);
+ hw->cursor_a_base = INREG(CURSOR_A_BASEADDR);
+ hw->cursor_b_base = INREG(CURSOR_B_BASEADDR);
+
+ if (flag == 6)
+ return flag;
+
+ for (i = 0; i < 4; i++) {
+ hw->cursor_a_palette[i] = INREG(CURSOR_A_PALETTE0 + (i << 2));
+ hw->cursor_b_palette[i] = INREG(CURSOR_B_PALETTE0 + (i << 2));
+ }
+
+ if (flag == 7)
+ return flag;
+
+ hw->cursor_size = INREG(CURSOR_SIZE);
+
+ if (flag == 8)
+ return flag;
+
+ hw->disp_a_ctrl = INREG(DSPACNTR);
+ hw->disp_b_ctrl = INREG(DSPBCNTR);
+ hw->disp_a_base = INREG(DSPABASE);
+ hw->disp_b_base = INREG(DSPBBASE);
+ hw->disp_a_stride = INREG(DSPASTRIDE);
+ hw->disp_b_stride = INREG(DSPBSTRIDE);
+
+ if (flag == 9)
+ return flag;
+
+ hw->vgacntrl = INREG(VGACNTRL);
+
+ if (flag == 10)
+ return flag;
+
+ hw->add_id = INREG(ADD_ID);
+
+ if (flag == 11)
+ return flag;
+
+ for (i = 0; i < 7; i++) {
+ hw->swf0x[i] = INREG(SWF00 + (i << 2));
+ hw->swf1x[i] = INREG(SWF10 + (i << 2));
+ if (i < 3)
+ hw->swf3x[i] = INREG(SWF30 + (i << 2));
+ }
+
+ for (i = 0; i < 8; i++)
+ hw->fence[i] = INREG(FENCE + (i << 2));
+
+ hw->instpm = INREG(INSTPM);
+ hw->mem_mode = INREG(MEM_MODE);
+ hw->fw_blc_0 = INREG(FW_BLC_0);
+ hw->fw_blc_1 = INREG(FW_BLC_1);
+
+ hw->hwstam = INREG16(HWSTAM);
+ hw->ier = INREG16(IER);
+ hw->iir = INREG16(IIR);
+ hw->imr = INREG16(IMR);
+
+ return 0;
+}
+
+
+static int calc_vclock3(int index, int m, int n, int p)
+{
+ if (p == 0 || n == 0)
+ return 0;
+ return plls[index].ref_clk * m / n / p;
+}
+
+static int calc_vclock(int index, int m1, int m2, int n, int p1, int p2,
+ int lvds)
+{
+ struct pll_min_max *pll = &plls[index];
+ u32 m, vco, p;
+
+ m = (5 * (m1 + 2)) + (m2 + 2);
+ n += 2;
+ vco = pll->ref_clk * m / n;
+
+ if (index == PLLS_I8xx)
+ p = ((p1 + 2) * (1 << (p2 + 1)));
+ else
+ p = ((p1) * (p2 ? 5 : 10));
+ return vco / p;
+}
+
+#if REGDUMP
+static void intelfbhw_get_p1p2(struct intelfb_info *dinfo, int dpll,
+ int *o_p1, int *o_p2)
+{
+ int p1, p2;
+
+ if (IS_I9XX(dinfo)) {
+ if (dpll & DPLL_P1_FORCE_DIV2)
+ p1 = 1;
+ else
+ p1 = (dpll >> DPLL_P1_SHIFT) & 0xff;
+
+ p1 = ffs(p1);
+
+ p2 = (dpll >> DPLL_I9XX_P2_SHIFT) & DPLL_P2_MASK;
+ } else {
+ if (dpll & DPLL_P1_FORCE_DIV2)
+ p1 = 0;
+ else
+ p1 = (dpll >> DPLL_P1_SHIFT) & DPLL_P1_MASK;
+ p2 = (dpll >> DPLL_P2_SHIFT) & DPLL_P2_MASK;
+ }
+
+ *o_p1 = p1;
+ *o_p2 = p2;
+}
+#endif
+
+
+void intelfbhw_print_hw_state(struct intelfb_info *dinfo,
+ struct intelfb_hwstate *hw)
+{
+#if REGDUMP
+ int i, m1, m2, n, p1, p2;
+ int index = dinfo->pll_index;
+ DBG_MSG("intelfbhw_print_hw_state\n");
+
+ if (!hw)
+ return;
+ /* Read in as much of the HW state as possible. */
+ printk("hw state dump start\n");
+ printk(" VGA0_DIVISOR: 0x%08x\n", hw->vga0_divisor);
+ printk(" VGA1_DIVISOR: 0x%08x\n", hw->vga1_divisor);
+ printk(" VGAPD: 0x%08x\n", hw->vga_pd);
+ n = (hw->vga0_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m1 = (hw->vga0_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m2 = (hw->vga0_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+
+ intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
+
+ printk(" VGA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
+ m1, m2, n, p1, p2);
+ printk(" VGA0: clock is %d\n",
+ calc_vclock(index, m1, m2, n, p1, p2, 0));
+
+ n = (hw->vga1_divisor >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m1 = (hw->vga1_divisor >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m2 = (hw->vga1_divisor >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+
+ intelfbhw_get_p1p2(dinfo, hw->vga_pd, &p1, &p2);
+ printk(" VGA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
+ m1, m2, n, p1, p2);
+ printk(" VGA1: clock is %d\n",
+ calc_vclock(index, m1, m2, n, p1, p2, 0));
+
+ printk(" DPLL_A: 0x%08x\n", hw->dpll_a);
+ printk(" DPLL_B: 0x%08x\n", hw->dpll_b);
+ printk(" FPA0: 0x%08x\n", hw->fpa0);
+ printk(" FPA1: 0x%08x\n", hw->fpa1);
+ printk(" FPB0: 0x%08x\n", hw->fpb0);
+ printk(" FPB1: 0x%08x\n", hw->fpb1);
+
+ n = (hw->fpa0 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m1 = (hw->fpa0 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m2 = (hw->fpa0 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+
+ intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
+
+ printk(" PLLA0: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
+ m1, m2, n, p1, p2);
+ printk(" PLLA0: clock is %d\n",
+ calc_vclock(index, m1, m2, n, p1, p2, 0));
+
+ n = (hw->fpa1 >> FP_N_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m1 = (hw->fpa1 >> FP_M1_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+ m2 = (hw->fpa1 >> FP_M2_DIVISOR_SHIFT) & FP_DIVISOR_MASK;
+
+ intelfbhw_get_p1p2(dinfo, hw->dpll_a, &p1, &p2);
+
+ printk(" PLLA1: (m1, m2, n, p1, p2) = (%d, %d, %d, %d, %d)\n",
+ m1, m2, n, p1, p2);
+ printk(" PLLA1: clock is %d\n",
+ calc_vclock(index, m1, m2, n, p1, p2, 0));
+
+#if 0
+ printk(" PALETTE_A:\n");
+ for (i = 0; i < PALETTE_8_ENTRIES)
+ printk(" %3d: 0x%08x\n", i, hw->palette_a[i]);
+ printk(" PALETTE_B:\n");
+ for (i = 0; i < PALETTE_8_ENTRIES)
+ printk(" %3d: 0x%08x\n", i, hw->palette_b[i]);
+#endif
+
+ printk(" HTOTAL_A: 0x%08x\n", hw->htotal_a);
+ printk(" HBLANK_A: 0x%08x\n", hw->hblank_a);
+ printk(" HSYNC_A: 0x%08x\n", hw->hsync_a);
+ printk(" VTOTAL_A: 0x%08x\n", hw->vtotal_a);
+ printk(" VBLANK_A: 0x%08x\n", hw->vblank_a);
+ printk(" VSYNC_A: 0x%08x\n", hw->vsync_a);
+ printk(" SRC_SIZE_A: 0x%08x\n", hw->src_size_a);
+ printk(" BCLRPAT_A: 0x%08x\n", hw->bclrpat_a);
+ printk(" HTOTAL_B: 0x%08x\n", hw->htotal_b);
+ printk(" HBLANK_B: 0x%08x\n", hw->hblank_b);
+ printk(" HSYNC_B: 0x%08x\n", hw->hsync_b);
+ printk(" VTOTAL_B: 0x%08x\n", hw->vtotal_b);
+ printk(" VBLANK_B: 0x%08x\n", hw->vblank_b);
+ printk(" VSYNC_B: 0x%08x\n", hw->vsync_b);
+ printk(" SRC_SIZE_B: 0x%08x\n", hw->src_size_b);
+ printk(" BCLRPAT_B: 0x%08x\n", hw->bclrpat_b);
+
+ printk(" ADPA: 0x%08x\n", hw->adpa);
+ printk(" DVOA: 0x%08x\n", hw->dvoa);
+ printk(" DVOB: 0x%08x\n", hw->dvob);
+ printk(" DVOC: 0x%08x\n", hw->dvoc);
+ printk(" DVOA_SRCDIM: 0x%08x\n", hw->dvoa_srcdim);
+ printk(" DVOB_SRCDIM: 0x%08x\n", hw->dvob_srcdim);
+ printk(" DVOC_SRCDIM: 0x%08x\n", hw->dvoc_srcdim);
+ printk(" LVDS: 0x%08x\n", hw->lvds);
+
+ printk(" PIPEACONF: 0x%08x\n", hw->pipe_a_conf);
+ printk(" PIPEBCONF: 0x%08x\n", hw->pipe_b_conf);
+ printk(" DISPARB: 0x%08x\n", hw->disp_arb);
+
+ printk(" CURSOR_A_CONTROL: 0x%08x\n", hw->cursor_a_control);
+ printk(" CURSOR_B_CONTROL: 0x%08x\n", hw->cursor_b_control);
+ printk(" CURSOR_A_BASEADDR: 0x%08x\n", hw->cursor_a_base);
+ printk(" CURSOR_B_BASEADDR: 0x%08x\n", hw->cursor_b_base);
+
+ printk(" CURSOR_A_PALETTE: ");
+ for (i = 0; i < 4; i++) {
+ printk("0x%08x", hw->cursor_a_palette[i]);
+ if (i < 3)
+ printk(", ");
+ }
+ printk("\n");
+ printk(" CURSOR_B_PALETTE: ");
+ for (i = 0; i < 4; i++) {
+ printk("0x%08x", hw->cursor_b_palette[i]);
+ if (i < 3)
+ printk(", ");
+ }
+ printk("\n");
+
+ printk(" CURSOR_SIZE: 0x%08x\n", hw->cursor_size);
+
+ printk(" DSPACNTR: 0x%08x\n", hw->disp_a_ctrl);
+ printk(" DSPBCNTR: 0x%08x\n", hw->disp_b_ctrl);
+ printk(" DSPABASE: 0x%08x\n", hw->disp_a_base);
+ printk(" DSPBBASE: 0x%08x\n", hw->disp_b_base);
+ printk(" DSPASTRIDE: 0x%08x\n", hw->disp_a_stride);
+ printk(" DSPBSTRIDE: 0x%08x\n", hw->disp_b_stride);
+
+ printk(" VGACNTRL: 0x%08x\n", hw->vgacntrl);
+ printk(" ADD_ID: 0x%08x\n", hw->add_id);
+
+ for (i = 0; i < 7; i++) {
+ printk(" SWF0%d 0x%08x\n", i,
+ hw->swf0x[i]);
+ }
+ for (i = 0; i < 7; i++) {
+ printk(" SWF1%d 0x%08x\n", i,
+ hw->swf1x[i]);
+ }
+ for (i = 0; i < 3; i++) {
+ printk(" SWF3%d 0x%08x\n", i,
+ hw->swf3x[i]);
+ }
+ for (i = 0; i < 8; i++)
+ printk(" FENCE%d 0x%08x\n", i,
+ hw->fence[i]);
+
+ printk(" INSTPM 0x%08x\n", hw->instpm);
+ printk(" MEM_MODE 0x%08x\n", hw->mem_mode);
+ printk(" FW_BLC_0 0x%08x\n", hw->fw_blc_0);
+ printk(" FW_BLC_1 0x%08x\n", hw->fw_blc_1);
+
+ printk(" HWSTAM 0x%04x\n", hw->hwstam);
+ printk(" IER 0x%04x\n", hw->ier);
+ printk(" IIR 0x%04x\n", hw->iir);
+ printk(" IMR 0x%04x\n", hw->imr);
+ printk("hw state dump end\n");
+#endif
+}
+
+
+
+/* Split the M parameter into M1 and M2. */
+static int splitm(int index, unsigned int m, unsigned int *retm1,
+ unsigned int *retm2)
+{
+ int m1, m2;
+ int testm;
+ struct pll_min_max *pll = &plls[index];
+
+ /* no point optimising too much - brute force m */
+ for (m1 = pll->min_m1; m1 < pll->max_m1 + 1; m1++) {
+ for (m2 = pll->min_m2; m2 < pll->max_m2 + 1; m2++) {
+ testm = (5 * (m1 + 2)) + (m2 + 2);
+ if (testm == m) {
+ *retm1 = (unsigned int)m1;
+ *retm2 = (unsigned int)m2;
+ return 0;
+ }
+ }
+ }
+ return 1;
+}
+
+/* Split the P parameter into P1 and P2. */
+static int splitp(int index, unsigned int p, unsigned int *retp1,
+ unsigned int *retp2)
+{
+ int p1, p2;
+ struct pll_min_max *pll = &plls[index];
+
+ if (index == PLLS_I9xx) {
+ p2 = (p % 10) ? 1 : 0;
+
+ p1 = p / (p2 ? 5 : 10);
+
+ *retp1 = (unsigned int)p1;
+ *retp2 = (unsigned int)p2;
+ return 0;
+ }
+
+ if (p % 4 == 0)
+ p2 = 1;
+ else
+ p2 = 0;
+ p1 = (p / (1 << (p2 + 1))) - 2;
+ if (p % 4 == 0 && p1 < pll->min_p1) {
+ p2 = 0;
+ p1 = (p / (1 << (p2 + 1))) - 2;
+ }
+ if (p1 < pll->min_p1 || p1 > pll->max_p1 ||
+ (p1 + 2) * (1 << (p2 + 1)) != p) {
+ return 1;
+ } else {
+ *retp1 = (unsigned int)p1;
+ *retp2 = (unsigned int)p2;
+ return 0;
+ }
+}
+
+static int calc_pll_params(int index, int clock, u32 *retm1, u32 *retm2,
+ u32 *retn, u32 *retp1, u32 *retp2, u32 *retclock)
+{
+ u32 m1, m2, n, p1, p2, n1, testm;
+ u32 f_vco, p, p_best = 0, m, f_out = 0;
+ u32 err_best = 10000000;
+ u32 n_best = 0, m_best = 0, f_err;
+ u32 p_min, p_max, p_inc, div_max;
+ struct pll_min_max *pll = &plls[index];
+
+ DBG_MSG("Clock is %d\n", clock);
+
+ div_max = pll->max_vco / clock;
+
+ p_inc = (clock <= pll->p_transition_clk) ? pll->p_inc_lo : pll->p_inc_hi;
+ p_min = p_inc;
+ p_max = ROUND_DOWN_TO(div_max, p_inc);
+ if (p_min < pll->min_p)
+ p_min = pll->min_p;
+ if (p_max > pll->max_p)
+ p_max = pll->max_p;
+
+ DBG_MSG("p range is %d-%d (%d)\n", p_min, p_max, p_inc);
+
+ p = p_min;
+ do {
+ if (splitp(index, p, &p1, &p2)) {
+ WRN_MSG("cannot split p = %d\n", p);
+ p += p_inc;
+ continue;
+ }
+ n = pll->min_n;
+ f_vco = clock * p;
+
+ do {
+ m = ROUND_UP_TO(f_vco * n, pll->ref_clk) / pll->ref_clk;
+ if (m < pll->min_m)
+ m = pll->min_m + 1;
+ if (m > pll->max_m)
+ m = pll->max_m - 1;
+ for (testm = m - 1; testm <= m; testm++) {
+ f_out = calc_vclock3(index, testm, n, p);
+ if (splitm(index, testm, &m1, &m2)) {
+ WRN_MSG("cannot split m = %d\n",
+ testm);
+ continue;
+ }
+ if (clock > f_out)
+ f_err = clock - f_out;
+ else/* slightly bias the error for bigger clocks */
+ f_err = f_out - clock + 1;
+
+ if (f_err < err_best) {
+ m_best = testm;
+ n_best = n;
+ p_best = p;
+ err_best = f_err;
+ }
+ }
+ n++;
+ } while ((n <= pll->max_n) && (f_out >= clock));
+ p += p_inc;
+ } while ((p <= p_max));
+
+ if (!m_best) {
+ WRN_MSG("cannot find parameters for clock %d\n", clock);
+ return 1;
+ }
+ m = m_best;
+ n = n_best;
+ p = p_best;
+ splitm(index, m, &m1, &m2);
+ splitp(index, p, &p1, &p2);
+ n1 = n - 2;
+
+ DBG_MSG("m, n, p: %d (%d,%d), %d (%d), %d (%d,%d), "
+ "f: %d (%d), VCO: %d\n",
+ m, m1, m2, n, n1, p, p1, p2,
+ calc_vclock3(index, m, n, p),
+ calc_vclock(index, m1, m2, n1, p1, p2, 0),
+ calc_vclock3(index, m, n, p) * p);
+ *retm1 = m1;
+ *retm2 = m2;
+ *retn = n1;
+ *retp1 = p1;
+ *retp2 = p2;
+ *retclock = calc_vclock(index, m1, m2, n1, p1, p2, 0);
+
+ return 0;
+}
+
+static __inline__ int check_overflow(u32 value, u32 limit,
+ const char *description)
+{
+ if (value > limit) {
+ WRN_MSG("%s value %d exceeds limit %d\n",
+ description, value, limit);
+ return 1;
+ }
+ return 0;
+}
+
+/* It is assumed that hw is filled in with the initial state information. */
+int intelfbhw_mode_to_hw(struct intelfb_info *dinfo,
+ struct intelfb_hwstate *hw,
+ struct fb_var_screeninfo *var)
+{
+ int pipe = intelfbhw_active_pipe(hw);
+ u32 *dpll, *fp0, *fp1;
+ u32 m1, m2, n, p1, p2, clock_target, clock;
+ u32 hsync_start, hsync_end, hblank_start, hblank_end, htotal, hactive;
+ u32 vsync_start, vsync_end, vblank_start, vblank_end, vtotal, vactive;
+ u32 vsync_pol, hsync_pol;
+ u32 *vs, *vb, *vt, *hs, *hb, *ht, *ss, *pipe_conf;
+ u32 stride_alignment;
+
+ DBG_MSG("intelfbhw_mode_to_hw\n");
+
+ /* Disable VGA */
+ hw->vgacntrl |= VGA_DISABLE;
+
+ /* Set which pipe's registers will be set. */
+ if (pipe == PIPE_B) {
+ dpll = &hw->dpll_b;
+ fp0 = &hw->fpb0;
+ fp1 = &hw->fpb1;
+ hs = &hw->hsync_b;
+ hb = &hw->hblank_b;
+ ht = &hw->htotal_b;
+ vs = &hw->vsync_b;
+ vb = &hw->vblank_b;
+ vt = &hw->vtotal_b;
+ ss = &hw->src_size_b;
+ pipe_conf = &hw->pipe_b_conf;
+ } else {
+ dpll = &hw->dpll_a;
+ fp0 = &hw->fpa0;
+ fp1 = &hw->fpa1;
+ hs = &hw->hsync_a;
+ hb = &hw->hblank_a;
+ ht = &hw->htotal_a;
+ vs = &hw->vsync_a;
+ vb = &hw->vblank_a;
+ vt = &hw->vtotal_a;
+ ss = &hw->src_size_a;
+ pipe_conf = &hw->pipe_a_conf;
+ }
+
+ /* Use ADPA register for sync control. */
+ hw->adpa &= ~ADPA_USE_VGA_HVPOLARITY;
+
+ /* sync polarity */
+ hsync_pol = (var->sync & FB_SYNC_HOR_HIGH_ACT) ?
+ ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
+ vsync_pol = (var->sync & FB_SYNC_VERT_HIGH_ACT) ?
+ ADPA_SYNC_ACTIVE_HIGH : ADPA_SYNC_ACTIVE_LOW;
+ hw->adpa &= ~((ADPA_SYNC_ACTIVE_MASK << ADPA_VSYNC_ACTIVE_SHIFT) |
+ (ADPA_SYNC_ACTIVE_MASK << ADPA_HSYNC_ACTIVE_SHIFT));
+ hw->adpa |= (hsync_pol << ADPA_HSYNC_ACTIVE_SHIFT) |
+ (vsync_pol << ADPA_VSYNC_ACTIVE_SHIFT);
+
+ /* Connect correct pipe to the analog port DAC */
+ hw->adpa &= ~(PIPE_MASK << ADPA_PIPE_SELECT_SHIFT);
+ hw->adpa |= (pipe << ADPA_PIPE_SELECT_SHIFT);
+
+ /* Set DPMS state to D0 (on) */
+ hw->adpa &= ~ADPA_DPMS_CONTROL_MASK;
+ hw->adpa |= ADPA_DPMS_D0;
+
+ hw->adpa |= ADPA_DAC_ENABLE;
+
+ *dpll |= (DPLL_VCO_ENABLE | DPLL_VGA_MODE_DISABLE);
+ *dpll &= ~(DPLL_RATE_SELECT_MASK | DPLL_REFERENCE_SELECT_MASK);
+ *dpll |= (DPLL_REFERENCE_DEFAULT | DPLL_RATE_SELECT_FP0);
+
+ /* Desired clock in kHz */
+ clock_target = 1000000000 / var->pixclock;
+
+ if (calc_pll_params(dinfo->pll_index, clock_target, &m1, &m2,
+ &n, &p1, &p2, &clock)) {
+ WRN_MSG("calc_pll_params failed\n");
+ return 1;
+ }
+
+ /* Check for overflow. */
+ if (check_overflow(p1, DPLL_P1_MASK, "PLL P1 parameter"))
+ return 1;
+ if (check_overflow(p2, DPLL_P2_MASK, "PLL P2 parameter"))
+ return 1;
+ if (check_overflow(m1, FP_DIVISOR_MASK, "PLL M1 parameter"))
+ return 1;
+ if (check_overflow(m2, FP_DIVISOR_MASK, "PLL M2 parameter"))
+ return 1;
+ if (check_overflow(n, FP_DIVISOR_MASK, "PLL N parameter"))
+ return 1;
+
+ *dpll &= ~DPLL_P1_FORCE_DIV2;
+ *dpll &= ~((DPLL_P2_MASK << DPLL_P2_SHIFT) |
+ (DPLL_P1_MASK << DPLL_P1_SHIFT));
+
+ if (IS_I9XX(dinfo)) {
+ *dpll |= (p2 << DPLL_I9XX_P2_SHIFT);
+ *dpll |= (1 << (p1 - 1)) << DPLL_P1_SHIFT;
+ } else
+ *dpll |= (p2 << DPLL_P2_SHIFT) | (p1 << DPLL_P1_SHIFT);
+
+ *fp0 = (n << FP_N_DIVISOR_SHIFT) |
+ (m1 << FP_M1_DIVISOR_SHIFT) |
+ (m2 << FP_M2_DIVISOR_SHIFT);
+ *fp1 = *fp0;
+
+ hw->dvob &= ~PORT_ENABLE;
+ hw->dvoc &= ~PORT_ENABLE;
+
+ /* Use display plane A. */
+ hw->disp_a_ctrl |= DISPPLANE_PLANE_ENABLE;
+ hw->disp_a_ctrl &= ~DISPPLANE_GAMMA_ENABLE;
+ hw->disp_a_ctrl &= ~DISPPLANE_PIXFORMAT_MASK;
+ switch (intelfb_var_to_depth(var)) {
+ case 8:
+ hw->disp_a_ctrl |= DISPPLANE_8BPP | DISPPLANE_GAMMA_ENABLE;
+ break;
+ case 15:
+ hw->disp_a_ctrl |= DISPPLANE_15_16BPP;
+ break;
+ case 16:
+ hw->disp_a_ctrl |= DISPPLANE_16BPP;
+ break;
+ case 24:
+ hw->disp_a_ctrl |= DISPPLANE_32BPP_NO_ALPHA;
+ break;
+ }
+ hw->disp_a_ctrl &= ~(PIPE_MASK << DISPPLANE_SEL_PIPE_SHIFT);
+ hw->disp_a_ctrl |= (pipe << DISPPLANE_SEL_PIPE_SHIFT);
+
+ /* Set CRTC registers. */
+ hactive = var->xres;
+ hsync_start = hactive + var->right_margin;
+ hsync_end = hsync_start + var->hsync_len;
+ htotal = hsync_end + var->left_margin;
+ hblank_start = hactive;
+ hblank_end = htotal;
+
+ DBG_MSG("H: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
+ hactive, hsync_start, hsync_end, htotal, hblank_start,
+ hblank_end);
+
+ vactive = var->yres;
+ if (var->vmode & FB_VMODE_INTERLACED)
+ vactive--; /* the chip adds 2 halflines automatically */
+ vsync_start = vactive + var->lower_margin;
+ vsync_end = vsync_start + var->vsync_len;
+ vtotal = vsync_end + var->upper_margin;
+ vblank_start = vactive;
+ vblank_end = vsync_end + 1;
+
+ DBG_MSG("V: act %d, ss %d, se %d, tot %d bs %d, be %d\n",
+ vactive, vsync_start, vsync_end, vtotal, vblank_start,
+ vblank_end);
+
+ /* Adjust for register values, and check for overflow. */
+ hactive--;
+ if (check_overflow(hactive, HACTIVE_MASK, "CRTC hactive"))
+ return 1;
+ hsync_start--;
+ if (check_overflow(hsync_start, HSYNCSTART_MASK, "CRTC hsync_start"))
+ return 1;
+ hsync_end--;
+ if (check_overflow(hsync_end, HSYNCEND_MASK, "CRTC hsync_end"))
+ return 1;
+ htotal--;
+ if (check_overflow(htotal, HTOTAL_MASK, "CRTC htotal"))
+ return 1;
+ hblank_start--;
+ if (check_overflow(hblank_start, HBLANKSTART_MASK, "CRTC hblank_start"))
+ return 1;
+ hblank_end--;
+ if (check_overflow(hblank_end, HBLANKEND_MASK, "CRTC hblank_end"))
+ return 1;
+
+ vactive--;
+ if (check_overflow(vactive, VACTIVE_MASK, "CRTC vactive"))
+ return 1;
+ vsync_start--;
+ if (check_overflow(vsync_start, VSYNCSTART_MASK, "CRTC vsync_start"))
+ return 1;
+ vsync_end--;
+ if (check_overflow(vsync_end, VSYNCEND_MASK, "CRTC vsync_end"))
+ return 1;
+ vtotal--;
+ if (check_overflow(vtotal, VTOTAL_MASK, "CRTC vtotal"))
+ return 1;
+ vblank_start--;
+ if (check_overflow(vblank_start, VBLANKSTART_MASK, "CRTC vblank_start"))
+ return 1;
+ vblank_end--;
+ if (check_overflow(vblank_end, VBLANKEND_MASK, "CRTC vblank_end"))
+ return 1;
+
+ *ht = (htotal << HTOTAL_SHIFT) | (hactive << HACTIVE_SHIFT);
+ *hb = (hblank_start << HBLANKSTART_SHIFT) |
+ (hblank_end << HSYNCEND_SHIFT);
+ *hs = (hsync_start << HSYNCSTART_SHIFT) | (hsync_end << HSYNCEND_SHIFT);
+
+ *vt = (vtotal << VTOTAL_SHIFT) | (vactive << VACTIVE_SHIFT);
+ *vb = (vblank_start << VBLANKSTART_SHIFT) |
+ (vblank_end << VSYNCEND_SHIFT);
+ *vs = (vsync_start << VSYNCSTART_SHIFT) | (vsync_end << VSYNCEND_SHIFT);
+ *ss = (hactive << SRC_SIZE_HORIZ_SHIFT) |
+ (vactive << SRC_SIZE_VERT_SHIFT);
+
+ hw->disp_a_stride = dinfo->pitch;
+ DBG_MSG("pitch is %d\n", hw->disp_a_stride);
+
+ hw->disp_a_base = hw->disp_a_stride * var->yoffset +
+ var->xoffset * var->bits_per_pixel / 8;
+
+ hw->disp_a_base += dinfo->fb.offset << 12;
+
+ /* Check stride alignment. */
+ stride_alignment = IS_I9XX(dinfo) ? STRIDE_ALIGNMENT_I9XX :
+ STRIDE_ALIGNMENT;
+ if (hw->disp_a_stride % stride_alignment != 0) {
+ WRN_MSG("display stride %d has bad alignment %d\n",
+ hw->disp_a_stride, stride_alignment);
+ return 1;
+ }
+
+ /* Set the palette to 8-bit mode. */
+ *pipe_conf &= ~PIPECONF_GAMMA;
+
+ if (var->vmode & FB_VMODE_INTERLACED)
+ *pipe_conf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+ else
+ *pipe_conf &= ~PIPECONF_INTERLACE_MASK;
+
+ return 0;
+}
+
+/* Program a (non-VGA) video mode. */
+int intelfbhw_program_mode(struct intelfb_info *dinfo,
+ const struct intelfb_hwstate *hw, int blank)
+{
+ u32 tmp;
+ const u32 *dpll, *fp0, *fp1, *pipe_conf;
+ const u32 *hs, *ht, *hb, *vs, *vt, *vb, *ss;
+ u32 dpll_reg, fp0_reg, fp1_reg, pipe_conf_reg, pipe_stat_reg;
+ u32 hsync_reg, htotal_reg, hblank_reg;
+ u32 vsync_reg, vtotal_reg, vblank_reg;
+ u32 src_size_reg;
+ u32 count, tmp_val[3];
+
+ /* Assume single pipe */
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_program_mode\n");
+#endif
+
+ /* Disable VGA */
+ tmp = INREG(VGACNTRL);
+ tmp |= VGA_DISABLE;
+ OUTREG(VGACNTRL, tmp);
+
+ dinfo->pipe = intelfbhw_active_pipe(hw);
+
+ if (dinfo->pipe == PIPE_B) {
+ dpll = &hw->dpll_b;
+ fp0 = &hw->fpb0;
+ fp1 = &hw->fpb1;
+ pipe_conf = &hw->pipe_b_conf;
+ hs = &hw->hsync_b;
+ hb = &hw->hblank_b;
+ ht = &hw->htotal_b;
+ vs = &hw->vsync_b;
+ vb = &hw->vblank_b;
+ vt = &hw->vtotal_b;
+ ss = &hw->src_size_b;
+ dpll_reg = DPLL_B;
+ fp0_reg = FPB0;
+ fp1_reg = FPB1;
+ pipe_conf_reg = PIPEBCONF;
+ pipe_stat_reg = PIPEBSTAT;
+ hsync_reg = HSYNC_B;
+ htotal_reg = HTOTAL_B;
+ hblank_reg = HBLANK_B;
+ vsync_reg = VSYNC_B;
+ vtotal_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ src_size_reg = SRC_SIZE_B;
+ } else {
+ dpll = &hw->dpll_a;
+ fp0 = &hw->fpa0;
+ fp1 = &hw->fpa1;
+ pipe_conf = &hw->pipe_a_conf;
+ hs = &hw->hsync_a;
+ hb = &hw->hblank_a;
+ ht = &hw->htotal_a;
+ vs = &hw->vsync_a;
+ vb = &hw->vblank_a;
+ vt = &hw->vtotal_a;
+ ss = &hw->src_size_a;
+ dpll_reg = DPLL_A;
+ fp0_reg = FPA0;
+ fp1_reg = FPA1;
+ pipe_conf_reg = PIPEACONF;
+ pipe_stat_reg = PIPEASTAT;
+ hsync_reg = HSYNC_A;
+ htotal_reg = HTOTAL_A;
+ hblank_reg = HBLANK_A;
+ vsync_reg = VSYNC_A;
+ vtotal_reg = VTOTAL_A;
+ vblank_reg = VBLANK_A;
+ src_size_reg = SRC_SIZE_A;
+ }
+
+ /* turn off pipe */
+ tmp = INREG(pipe_conf_reg);
+ tmp &= ~PIPECONF_ENABLE;
+ OUTREG(pipe_conf_reg, tmp);
+
+ count = 0;
+ do {
+ tmp_val[count % 3] = INREG(PIPEA_DSL);
+ if ((tmp_val[0] == tmp_val[1]) && (tmp_val[1] == tmp_val[2]))
+ break;
+ count++;
+ udelay(1);
+ if (count % 200 == 0) {
+ tmp = INREG(pipe_conf_reg);
+ tmp &= ~PIPECONF_ENABLE;
+ OUTREG(pipe_conf_reg, tmp);
+ }
+ } while (count < 2000);
+
+ OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
+
+ /* Disable planes A and B. */
+ tmp = INREG(DSPACNTR);
+ tmp &= ~DISPPLANE_PLANE_ENABLE;
+ OUTREG(DSPACNTR, tmp);
+ tmp = INREG(DSPBCNTR);
+ tmp &= ~DISPPLANE_PLANE_ENABLE;
+ OUTREG(DSPBCNTR, tmp);
+
+ /* Wait for vblank. For now, just wait for a 50Hz cycle (20ms)) */
+ mdelay(20);
+
+ OUTREG(DVOB, INREG(DVOB) & ~PORT_ENABLE);
+ OUTREG(DVOC, INREG(DVOC) & ~PORT_ENABLE);
+ OUTREG(ADPA, INREG(ADPA) & ~ADPA_DAC_ENABLE);
+
+ /* Disable Sync */
+ tmp = INREG(ADPA);
+ tmp &= ~ADPA_DPMS_CONTROL_MASK;
+ tmp |= ADPA_DPMS_D3;
+ OUTREG(ADPA, tmp);
+
+ /* do some funky magic - xyzzy */
+ OUTREG(0x61204, 0xabcd0000);
+
+ /* turn off PLL */
+ tmp = INREG(dpll_reg);
+ tmp &= ~DPLL_VCO_ENABLE;
+ OUTREG(dpll_reg, tmp);
+
+ /* Set PLL parameters */
+ OUTREG(fp0_reg, *fp0);
+ OUTREG(fp1_reg, *fp1);
+
+ /* Enable PLL */
+ OUTREG(dpll_reg, *dpll);
+
+ /* Set DVOs B/C */
+ OUTREG(DVOB, hw->dvob);
+ OUTREG(DVOC, hw->dvoc);
+
+ /* undo funky magic */
+ OUTREG(0x61204, 0x00000000);
+
+ /* Set ADPA */
+ OUTREG(ADPA, INREG(ADPA) | ADPA_DAC_ENABLE);
+ OUTREG(ADPA, (hw->adpa & ~(ADPA_DPMS_CONTROL_MASK)) | ADPA_DPMS_D3);
+
+ /* Set pipe parameters */
+ OUTREG(hsync_reg, *hs);
+ OUTREG(hblank_reg, *hb);
+ OUTREG(htotal_reg, *ht);
+ OUTREG(vsync_reg, *vs);
+ OUTREG(vblank_reg, *vb);
+ OUTREG(vtotal_reg, *vt);
+ OUTREG(src_size_reg, *ss);
+
+ switch (dinfo->info->var.vmode & (FB_VMODE_INTERLACED |
+ FB_VMODE_ODD_FLD_FIRST)) {
+ case FB_VMODE_INTERLACED | FB_VMODE_ODD_FLD_FIRST:
+ OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_ODD_EN);
+ break;
+ case FB_VMODE_INTERLACED: /* even lines first */
+ OUTREG(pipe_stat_reg, 0xFFFF | PIPESTAT_FLD_EVT_EVEN_EN);
+ break;
+ default: /* non-interlaced */
+ OUTREG(pipe_stat_reg, 0xFFFF); /* clear all status bits only */
+ }
+ /* Enable pipe */
+ OUTREG(pipe_conf_reg, *pipe_conf | PIPECONF_ENABLE);
+
+ /* Enable sync */
+ tmp = INREG(ADPA);
+ tmp &= ~ADPA_DPMS_CONTROL_MASK;
+ tmp |= ADPA_DPMS_D0;
+ OUTREG(ADPA, tmp);
+
+ /* setup display plane */
+ if (dinfo->pdev->device == PCI_DEVICE_ID_INTEL_830M) {
+ /*
+ * i830M errata: the display plane must be enabled
+ * to allow writes to the other bits in the plane
+ * control register.
+ */
+ tmp = INREG(DSPACNTR);
+ if ((tmp & DISPPLANE_PLANE_ENABLE) != DISPPLANE_PLANE_ENABLE) {
+ tmp |= DISPPLANE_PLANE_ENABLE;
+ OUTREG(DSPACNTR, tmp);
+ OUTREG(DSPACNTR,
+ hw->disp_a_ctrl|DISPPLANE_PLANE_ENABLE);
+ mdelay(1);
+ }
+ }
+
+ OUTREG(DSPACNTR, hw->disp_a_ctrl & ~DISPPLANE_PLANE_ENABLE);
+ OUTREG(DSPASTRIDE, hw->disp_a_stride);
+ OUTREG(DSPABASE, hw->disp_a_base);
+
+ /* Enable plane */
+ if (!blank) {
+ tmp = INREG(DSPACNTR);
+ tmp |= DISPPLANE_PLANE_ENABLE;
+ OUTREG(DSPACNTR, tmp);
+ OUTREG(DSPABASE, hw->disp_a_base);
+ }
+
+ return 0;
+}
+
+/* forward declarations */
+static void refresh_ring(struct intelfb_info *dinfo);
+static void reset_state(struct intelfb_info *dinfo);
+static void do_flush(struct intelfb_info *dinfo);
+
+static u32 get_ring_space(struct intelfb_info *dinfo)
+{
+ u32 ring_space;
+
+ if (dinfo->ring_tail >= dinfo->ring_head)
+ ring_space = dinfo->ring.size -
+ (dinfo->ring_tail - dinfo->ring_head);
+ else
+ ring_space = dinfo->ring_head - dinfo->ring_tail;
+
+ if (ring_space > RING_MIN_FREE)
+ ring_space -= RING_MIN_FREE;
+ else
+ ring_space = 0;
+
+ return ring_space;
+}
+
+static int wait_ring(struct intelfb_info *dinfo, int n)
+{
+ int i = 0;
+ unsigned long end;
+ u32 last_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
+
+#if VERBOSE > 0
+ DBG_MSG("wait_ring: %d\n", n);
+#endif
+
+ end = jiffies + (HZ * 3);
+ while (dinfo->ring_space < n) {
+ dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
+ dinfo->ring_space = get_ring_space(dinfo);
+
+ if (dinfo->ring_head != last_head) {
+ end = jiffies + (HZ * 3);
+ last_head = dinfo->ring_head;
+ }
+ i++;
+ if (time_before(end, jiffies)) {
+ if (!i) {
+ /* Try again */
+ reset_state(dinfo);
+ refresh_ring(dinfo);
+ do_flush(dinfo);
+ end = jiffies + (HZ * 3);
+ i = 1;
+ } else {
+ WRN_MSG("ring buffer : space: %d wanted %d\n",
+ dinfo->ring_space, n);
+ WRN_MSG("lockup - turning off hardware "
+ "acceleration\n");
+ dinfo->ring_lockup = 1;
+ break;
+ }
+ }
+ udelay(1);
+ }
+ return i;
+}
+
+static void do_flush(struct intelfb_info *dinfo)
+{
+ START_RING(2);
+ OUT_RING(MI_FLUSH | MI_WRITE_DIRTY_STATE | MI_INVALIDATE_MAP_CACHE);
+ OUT_RING(MI_NOOP);
+ ADVANCE_RING();
+}
+
+void intelfbhw_do_sync(struct intelfb_info *dinfo)
+{
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_do_sync\n");
+#endif
+
+ if (!dinfo->accel)
+ return;
+
+ /*
+ * Send a flush, then wait until the ring is empty. This is what
+ * the XFree86 driver does, and actually it doesn't seem a lot worse
+ * than the recommended method (both have problems).
+ */
+ do_flush(dinfo);
+ wait_ring(dinfo, dinfo->ring.size - RING_MIN_FREE);
+ dinfo->ring_space = dinfo->ring.size - RING_MIN_FREE;
+}
+
+static void refresh_ring(struct intelfb_info *dinfo)
+{
+#if VERBOSE > 0
+ DBG_MSG("refresh_ring\n");
+#endif
+
+ dinfo->ring_head = INREG(PRI_RING_HEAD) & RING_HEAD_MASK;
+ dinfo->ring_tail = INREG(PRI_RING_TAIL) & RING_TAIL_MASK;
+ dinfo->ring_space = get_ring_space(dinfo);
+}
+
+static void reset_state(struct intelfb_info *dinfo)
+{
+ int i;
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("reset_state\n");
+#endif
+
+ for (i = 0; i < FENCE_NUM; i++)
+ OUTREG(FENCE + (i << 2), 0);
+
+ /* Flush the ring buffer if it's enabled. */
+ tmp = INREG(PRI_RING_LENGTH);
+ if (tmp & RING_ENABLE) {
+#if VERBOSE > 0
+ DBG_MSG("reset_state: ring was enabled\n");
+#endif
+ refresh_ring(dinfo);
+ intelfbhw_do_sync(dinfo);
+ DO_RING_IDLE();
+ }
+
+ OUTREG(PRI_RING_LENGTH, 0);
+ OUTREG(PRI_RING_HEAD, 0);
+ OUTREG(PRI_RING_TAIL, 0);
+ OUTREG(PRI_RING_START, 0);
+}
+
+/* Stop the 2D engine, and turn off the ring buffer. */
+void intelfbhw_2d_stop(struct intelfb_info *dinfo)
+{
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_2d_stop: accel: %d, ring_active: %d\n",
+ dinfo->accel, dinfo->ring_active);
+#endif
+
+ if (!dinfo->accel)
+ return;
+
+ dinfo->ring_active = 0;
+ reset_state(dinfo);
+}
+
+/*
+ * Enable the ring buffer, and initialise the 2D engine.
+ * It is assumed that the graphics engine has been stopped by previously
+ * calling intelfb_2d_stop().
+ */
+void intelfbhw_2d_start(struct intelfb_info *dinfo)
+{
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_2d_start: accel: %d, ring_active: %d\n",
+ dinfo->accel, dinfo->ring_active);
+#endif
+
+ if (!dinfo->accel)
+ return;
+
+ /* Initialise the primary ring buffer. */
+ OUTREG(PRI_RING_LENGTH, 0);
+ OUTREG(PRI_RING_TAIL, 0);
+ OUTREG(PRI_RING_HEAD, 0);
+
+ OUTREG(PRI_RING_START, dinfo->ring.physical & RING_START_MASK);
+ OUTREG(PRI_RING_LENGTH,
+ ((dinfo->ring.size - GTT_PAGE_SIZE) & RING_LENGTH_MASK) |
+ RING_NO_REPORT | RING_ENABLE);
+ refresh_ring(dinfo);
+ dinfo->ring_active = 1;
+}
+
+/* 2D fillrect (solid fill or invert) */
+void intelfbhw_do_fillrect(struct intelfb_info *dinfo, u32 x, u32 y, u32 w,
+ u32 h, u32 color, u32 pitch, u32 bpp, u32 rop)
+{
+ u32 br00, br09, br13, br14, br16;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_do_fillrect: (%d,%d) %dx%d, c 0x%06x, p %d bpp %d, "
+ "rop 0x%02x\n", x, y, w, h, color, pitch, bpp, rop);
+#endif
+
+ br00 = COLOR_BLT_CMD;
+ br09 = dinfo->fb_start + (y * pitch + x * (bpp / 8));
+ br13 = (rop << ROP_SHIFT) | pitch;
+ br14 = (h << HEIGHT_SHIFT) | ((w * (bpp / 8)) << WIDTH_SHIFT);
+ br16 = color;
+
+ switch (bpp) {
+ case 8:
+ br13 |= COLOR_DEPTH_8;
+ break;
+ case 16:
+ br13 |= COLOR_DEPTH_16;
+ break;
+ case 32:
+ br13 |= COLOR_DEPTH_32;
+ br00 |= WRITE_ALPHA | WRITE_RGB;
+ break;
+ }
+
+ START_RING(6);
+ OUT_RING(br00);
+ OUT_RING(br13);
+ OUT_RING(br14);
+ OUT_RING(br09);
+ OUT_RING(br16);
+ OUT_RING(MI_NOOP);
+ ADVANCE_RING();
+
+#if VERBOSE > 0
+ DBG_MSG("ring = 0x%08x, 0x%08x (%d)\n", dinfo->ring_head,
+ dinfo->ring_tail, dinfo->ring_space);
+#endif
+}
+
+void
+intelfbhw_do_bitblt(struct intelfb_info *dinfo, u32 curx, u32 cury,
+ u32 dstx, u32 dsty, u32 w, u32 h, u32 pitch, u32 bpp)
+{
+ u32 br00, br09, br11, br12, br13, br22, br23, br26;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_do_bitblt: (%d,%d)->(%d,%d) %dx%d, p %d bpp %d\n",
+ curx, cury, dstx, dsty, w, h, pitch, bpp);
+#endif
+
+ br00 = XY_SRC_COPY_BLT_CMD;
+ br09 = dinfo->fb_start;
+ br11 = (pitch << PITCH_SHIFT);
+ br12 = dinfo->fb_start;
+ br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
+ br22 = (dstx << WIDTH_SHIFT) | (dsty << HEIGHT_SHIFT);
+ br23 = ((dstx + w) << WIDTH_SHIFT) |
+ ((dsty + h) << HEIGHT_SHIFT);
+ br26 = (curx << WIDTH_SHIFT) | (cury << HEIGHT_SHIFT);
+
+ switch (bpp) {
+ case 8:
+ br13 |= COLOR_DEPTH_8;
+ break;
+ case 16:
+ br13 |= COLOR_DEPTH_16;
+ break;
+ case 32:
+ br13 |= COLOR_DEPTH_32;
+ br00 |= WRITE_ALPHA | WRITE_RGB;
+ break;
+ }
+
+ START_RING(8);
+ OUT_RING(br00);
+ OUT_RING(br13);
+ OUT_RING(br22);
+ OUT_RING(br23);
+ OUT_RING(br09);
+ OUT_RING(br26);
+ OUT_RING(br11);
+ OUT_RING(br12);
+ ADVANCE_RING();
+}
+
+int intelfbhw_do_drawglyph(struct intelfb_info *dinfo, u32 fg, u32 bg, u32 w,
+ u32 h, const u8* cdat, u32 x, u32 y, u32 pitch,
+ u32 bpp)
+{
+ int nbytes, ndwords, pad, tmp;
+ u32 br00, br09, br13, br18, br19, br22, br23;
+ int dat, ix, iy, iw;
+ int i, j;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_do_drawglyph: (%d,%d) %dx%d\n", x, y, w, h);
+#endif
+
+ /* size in bytes of a padded scanline */
+ nbytes = ROUND_UP_TO(w, 16) / 8;
+
+ /* Total bytes of padded scanline data to write out. */
+ nbytes = nbytes * h;
+
+ /*
+ * Check if the glyph data exceeds the immediate mode limit.
+ * It would take a large font (1K pixels) to hit this limit.
+ */
+ if (nbytes > MAX_MONO_IMM_SIZE)
+ return 0;
+
+ /* Src data is packaged a dword (32-bit) at a time. */
+ ndwords = ROUND_UP_TO(nbytes, 4) / 4;
+
+ /*
+ * Ring has to be padded to a quad word. But because the command starts
+ with 7 bytes, pad only if there is an even number of ndwords
+ */
+ pad = !(ndwords % 2);
+
+ tmp = (XY_MONO_SRC_IMM_BLT_CMD & DW_LENGTH_MASK) + ndwords;
+ br00 = (XY_MONO_SRC_IMM_BLT_CMD & ~DW_LENGTH_MASK) | tmp;
+ br09 = dinfo->fb_start;
+ br13 = (SRC_ROP_GXCOPY << ROP_SHIFT) | (pitch << PITCH_SHIFT);
+ br18 = bg;
+ br19 = fg;
+ br22 = (x << WIDTH_SHIFT) | (y << HEIGHT_SHIFT);
+ br23 = ((x + w) << WIDTH_SHIFT) | ((y + h) << HEIGHT_SHIFT);
+
+ switch (bpp) {
+ case 8:
+ br13 |= COLOR_DEPTH_8;
+ break;
+ case 16:
+ br13 |= COLOR_DEPTH_16;
+ break;
+ case 32:
+ br13 |= COLOR_DEPTH_32;
+ br00 |= WRITE_ALPHA | WRITE_RGB;
+ break;
+ }
+
+ START_RING(8 + ndwords);
+ OUT_RING(br00);
+ OUT_RING(br13);
+ OUT_RING(br22);
+ OUT_RING(br23);
+ OUT_RING(br09);
+ OUT_RING(br18);
+ OUT_RING(br19);
+ ix = iy = 0;
+ iw = ROUND_UP_TO(w, 8) / 8;
+ while (ndwords--) {
+ dat = 0;
+ for (j = 0; j < 2; ++j) {
+ for (i = 0; i < 2; ++i) {
+ if (ix != iw || i == 0)
+ dat |= cdat[iy*iw + ix++] << (i+j*2)*8;
+ }
+ if (ix == iw && iy != (h-1)) {
+ ix = 0;
+ ++iy;
+ }
+ }
+ OUT_RING(dat);
+ }
+ if (pad)
+ OUT_RING(MI_NOOP);
+ ADVANCE_RING();
+
+ return 1;
+}
+
+/* HW cursor functions. */
+void intelfbhw_cursor_init(struct intelfb_info *dinfo)
+{
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_init\n");
+#endif
+
+ if (dinfo->mobile || IS_I9XX(dinfo)) {
+ if (!dinfo->cursor.physical)
+ return;
+ tmp = INREG(CURSOR_A_CONTROL);
+ tmp &= ~(CURSOR_MODE_MASK | CURSOR_MOBILE_GAMMA_ENABLE |
+ CURSOR_MEM_TYPE_LOCAL |
+ (1 << CURSOR_PIPE_SELECT_SHIFT));
+ tmp |= CURSOR_MODE_DISABLE;
+ OUTREG(CURSOR_A_CONTROL, tmp);
+ OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
+ } else {
+ tmp = INREG(CURSOR_CONTROL);
+ tmp &= ~(CURSOR_FORMAT_MASK | CURSOR_GAMMA_ENABLE |
+ CURSOR_ENABLE | CURSOR_STRIDE_MASK);
+ tmp |= CURSOR_FORMAT_3C;
+ OUTREG(CURSOR_CONTROL, tmp);
+ OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.offset << 12);
+ tmp = (64 << CURSOR_SIZE_H_SHIFT) |
+ (64 << CURSOR_SIZE_V_SHIFT);
+ OUTREG(CURSOR_SIZE, tmp);
+ }
+}
+
+void intelfbhw_cursor_hide(struct intelfb_info *dinfo)
+{
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_hide\n");
+#endif
+
+ dinfo->cursor_on = 0;
+ if (dinfo->mobile || IS_I9XX(dinfo)) {
+ if (!dinfo->cursor.physical)
+ return;
+ tmp = INREG(CURSOR_A_CONTROL);
+ tmp &= ~CURSOR_MODE_MASK;
+ tmp |= CURSOR_MODE_DISABLE;
+ OUTREG(CURSOR_A_CONTROL, tmp);
+ /* Flush changes */
+ OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
+ } else {
+ tmp = INREG(CURSOR_CONTROL);
+ tmp &= ~CURSOR_ENABLE;
+ OUTREG(CURSOR_CONTROL, tmp);
+ }
+}
+
+void intelfbhw_cursor_show(struct intelfb_info *dinfo)
+{
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_show\n");
+#endif
+
+ dinfo->cursor_on = 1;
+
+ if (dinfo->cursor_blanked)
+ return;
+
+ if (dinfo->mobile || IS_I9XX(dinfo)) {
+ if (!dinfo->cursor.physical)
+ return;
+ tmp = INREG(CURSOR_A_CONTROL);
+ tmp &= ~CURSOR_MODE_MASK;
+ tmp |= CURSOR_MODE_64_4C_AX;
+ OUTREG(CURSOR_A_CONTROL, tmp);
+ /* Flush changes */
+ OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
+ } else {
+ tmp = INREG(CURSOR_CONTROL);
+ tmp |= CURSOR_ENABLE;
+ OUTREG(CURSOR_CONTROL, tmp);
+ }
+}
+
+void intelfbhw_cursor_setpos(struct intelfb_info *dinfo, int x, int y)
+{
+ u32 tmp;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_setpos: (%d, %d)\n", x, y);
+#endif
+
+ /*
+ * Sets the position. The coordinates are assumed to already
+ * have any offset adjusted. Assume that the cursor is never
+ * completely off-screen, and that x, y are always >= 0.
+ */
+
+ tmp = ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT) |
+ ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+ OUTREG(CURSOR_A_POSITION, tmp);
+
+ if (IS_I9XX(dinfo))
+ OUTREG(CURSOR_A_BASEADDR, dinfo->cursor.physical);
+}
+
+void intelfbhw_cursor_setcolor(struct intelfb_info *dinfo, u32 bg, u32 fg)
+{
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_setcolor\n");
+#endif
+
+ OUTREG(CURSOR_A_PALETTE0, bg & CURSOR_PALETTE_MASK);
+ OUTREG(CURSOR_A_PALETTE1, fg & CURSOR_PALETTE_MASK);
+ OUTREG(CURSOR_A_PALETTE2, fg & CURSOR_PALETTE_MASK);
+ OUTREG(CURSOR_A_PALETTE3, bg & CURSOR_PALETTE_MASK);
+}
+
+void intelfbhw_cursor_load(struct intelfb_info *dinfo, int width, int height,
+ u8 *data)
+{
+ u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
+ int i, j, w = width / 8;
+ int mod = width % 8, t_mask, d_mask;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_load\n");
+#endif
+
+ if (!dinfo->cursor.virtual)
+ return;
+
+ t_mask = 0xff >> mod;
+ d_mask = ~(0xff >> mod);
+ for (i = height; i--; ) {
+ for (j = 0; j < w; j++) {
+ writeb(0x00, addr + j);
+ writeb(*(data++), addr + j+8);
+ }
+ if (mod) {
+ writeb(t_mask, addr + j);
+ writeb(*(data++) & d_mask, addr + j+8);
+ }
+ addr += 16;
+ }
+}
+
+void intelfbhw_cursor_reset(struct intelfb_info *dinfo)
+{
+ u8 __iomem *addr = (u8 __iomem *)dinfo->cursor.virtual;
+ int i, j;
+
+#if VERBOSE > 0
+ DBG_MSG("intelfbhw_cursor_reset\n");
+#endif
+
+ if (!dinfo->cursor.virtual)
+ return;
+
+ for (i = 64; i--; ) {
+ for (j = 0; j < 8; j++) {
+ writeb(0xff, addr + j+0);
+ writeb(0x00, addr + j+8);
+ }
+ addr += 16;
+ }
+}
+
+static irqreturn_t intelfbhw_irq(int irq, void *dev_id)
+{
+ u16 tmp;
+ struct intelfb_info *dinfo = dev_id;
+
+ spin_lock(&dinfo->int_lock);
+
+ tmp = INREG16(IIR);
+ if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
+ tmp &= PIPE_A_EVENT_INTERRUPT;
+ else
+ tmp &= VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
+
+ if (tmp == 0) {
+ spin_unlock(&dinfo->int_lock);
+ return IRQ_RETVAL(0); /* not us */
+ }
+
+ /* clear status bits 0-15 ASAP and don't touch bits 16-31 */
+ OUTREG(PIPEASTAT, INREG(PIPEASTAT));
+
+ OUTREG16(IIR, tmp);
+ if (dinfo->vsync.pan_display) {
+ dinfo->vsync.pan_display = 0;
+ OUTREG(DSPABASE, dinfo->vsync.pan_offset);
+ }
+
+ dinfo->vsync.count++;
+ wake_up_interruptible(&dinfo->vsync.wait);
+
+ spin_unlock(&dinfo->int_lock);
+
+ return IRQ_RETVAL(1);
+}
+
+int intelfbhw_enable_irq(struct intelfb_info *dinfo)
+{
+ u16 tmp;
+ if (!test_and_set_bit(0, &dinfo->irq_flags)) {
+ if (request_irq(dinfo->pdev->irq, intelfbhw_irq, IRQF_SHARED,
+ "intelfb", dinfo)) {
+ clear_bit(0, &dinfo->irq_flags);
+ return -EINVAL;
+ }
+
+ spin_lock_irq(&dinfo->int_lock);
+ OUTREG16(HWSTAM, 0xfffe); /* i830 DRM uses ffff */
+ OUTREG16(IMR, 0);
+ } else
+ spin_lock_irq(&dinfo->int_lock);
+
+ if (dinfo->info->var.vmode & FB_VMODE_INTERLACED)
+ tmp = PIPE_A_EVENT_INTERRUPT;
+ else
+ tmp = VSYNC_PIPE_A_INTERRUPT; /* non-interlaced */
+ if (tmp != INREG16(IER)) {
+ DBG_MSG("changing IER to 0x%X\n", tmp);
+ OUTREG16(IER, tmp);
+ }
+
+ spin_unlock_irq(&dinfo->int_lock);
+ return 0;
+}
+
+void intelfbhw_disable_irq(struct intelfb_info *dinfo)
+{
+ if (test_and_clear_bit(0, &dinfo->irq_flags)) {
+ if (dinfo->vsync.pan_display) {
+ dinfo->vsync.pan_display = 0;
+ OUTREG(DSPABASE, dinfo->vsync.pan_offset);
+ }
+ spin_lock_irq(&dinfo->int_lock);
+ OUTREG16(HWSTAM, 0xffff);
+ OUTREG16(IMR, 0xffff);
+ OUTREG16(IER, 0x0);
+
+ OUTREG16(IIR, INREG16(IIR)); /* clear IRQ requests */
+ spin_unlock_irq(&dinfo->int_lock);
+
+ free_irq(dinfo->pdev->irq, dinfo);
+ }
+}
+
+int intelfbhw_wait_for_vsync(struct intelfb_info *dinfo, u32 pipe)
+{
+ struct intelfb_vsync *vsync;
+ unsigned int count;
+ int ret;
+
+ switch (pipe) {
+ case 0:
+ vsync = &dinfo->vsync;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = intelfbhw_enable_irq(dinfo);
+ if (ret)
+ return ret;
+
+ count = vsync->count;
+ ret = wait_event_interruptible_timeout(vsync->wait,
+ count != vsync->count, HZ / 10);
+ if (ret < 0)
+ return ret;
+ if (ret == 0) {
+ DBG_MSG("wait_for_vsync timed out!\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}