1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
Exynos MIPI DSI Master
Required properties:
- compatible: value should be one of the following
"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
- reg: physical base address and length of the registers set for the device
- interrupts: should contain DSI interrupt
- clocks: list of clock specifiers, must contain an entry for each required
entry in clock-names
- clock-names: should include "bus_clk"and "sclk_mipi" entries
the use of "pll_clk" is deprecated
- phys: list of phy specifiers, must contain an entry for each required
entry in phy-names
- phy-names: should include "dsim" entry
- vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
- vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
- samsung,pll-clock-frequency: specifies frequency of the oscillator clock
- #address-cells, #size-cells: should be set respectively to <1> and <0>
according to DSI host bindings (see MIPI DSI bindings [1])
- samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
mode
- samsung,esc-clock-frequency: specifies DSI frequency in escape mode
Optional properties:
- power-domains: a phandle to DSIM power domain node
Child nodes:
Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
Video interfaces:
Device node can contain following video interface port nodes according to [2]:
0: RGB input,
1: DSI output
[1]: Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:
dsi@11c80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>;
clocks = <&clock 286>, <&clock 143>;
clock-names = "bus_clk", "sclk_mipi";
phys = <&mipi_phy 1>;
phy-names = "dsim";
vddcore-supply = <&vusb_reg>;
vddio-supply = <&vmipi_reg>;
power-domains = <&pd_lcd0>;
#address-cells = <1>;
#size-cells = <0>;
samsung,pll-clock-frequency = <24000000>;
panel@1 {
reg = <0>;
...
port {
panel_ep: endpoint {
remote-endpoint = <&dsi_ep>;
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
decon_to_mic: endpoint {
remote-endpoint = <&mic_to_decon>;
};
};
port@1 {
reg = <1>;
dsi_ep: endpoint {
reg = <0>;
samsung,burst-clock-frequency = <500000000>;
samsung,esc-clock-frequency = <20000000>;
remote-endpoint = <&panel_ep>;
};
};
};
};
|
