1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mmc/socionext,uniphier-sd.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: UniPhier SD/SDIO/eMMC controller
maintainers:
- Masahiro Yamada <yamada.masahiro@socionext.com>
properties:
compatible:
description: version 2.91, 3.1, 3.1.1, respectively
enum:
- socionext,uniphier-sd-v2.91
- socionext,uniphier-sd-v3.1
- socionext,uniphier-sd-v3.1.1
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
dmas:
maxItems: 1
dma-names:
const: rx-tx
reset-names:
description: |
There are three reset signals at maximum
host: mandatory for all variants
bridge: exist only for version 2.91
hw: optional. exist if eMMC hw reset line is available
oneOf:
- const: host
- items:
- const: host
- const: bridge
- items:
- const: host
- const: hw
- items:
- const: host
- const: bridge
- const: hw
resets:
minItems: 1
maxItems: 3
allOf:
- $ref: mmc-controller.yaml
- if:
properties:
compatible:
contains:
const: socionext,uniphier-sd-v2.91
then:
properties:
reset-names:
contains:
const: bridge
else:
properties:
reset-names:
not:
contains:
const: bridge
required:
- compatible
- reg
- interrupts
- clocks
- reset-names
- resets
unevaluatedProperties: false
examples:
- |
sd: mmc@5a400000 {
compatible = "socionext,uniphier-sd-v2.91";
reg = <0x5a400000 0x200>;
interrupts = <0 76 4>;
pinctrl-names = "default", "uhs";
pinctrl-0 = <&pinctrl_sd>;
pinctrl-1 = <&pinctrl_sd_uhs>;
clocks = <&mio_clk 0>;
reset-names = "host", "bridge";
resets = <&mio_rst 0>, <&mio_rst 3>;
dma-names = "rx-tx";
dmas = <&dmac 4>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr12;
sd-uhs-sdr25;
sd-uhs-sdr50;
};
|
