1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Brcmstb PCIe Host Controller
maintainers:
- Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
properties:
compatible:
items:
- enum:
- brcm,bcm2711-pcie # The Raspberry Pi 4
- brcm,bcm4908-pcie
- brcm,bcm7211-pcie # Broadcom STB version of RPi4
- brcm,bcm7278-pcie # Broadcom 7278 Arm
- brcm,bcm7216-pcie # Broadcom 7216 Arm
- brcm,bcm7445-pcie # Broadcom 7445 Arm
- brcm,bcm7425-pcie # Broadcom 7425 MIPs
- brcm,bcm7435-pcie # Broadcom 7435 MIPs
reg:
maxItems: 1
interrupts:
minItems: 1
items:
- description: PCIe host controller
- description: builtin MSI controller
interrupt-names:
minItems: 1
items:
- const: pcie
- const: msi
ranges:
minItems: 1
maxItems: 4
dma-ranges:
minItems: 1
maxItems: 6
clocks:
maxItems: 1
clock-names:
items:
- const: sw_pcie
msi-controller:
description: Identifies the node as an MSI controller.
msi-parent:
description: MSI controller the device is capable of using.
brcm,enable-ssc:
description: Indicates usage of spread-spectrum clocking.
type: boolean
aspm-no-l0s: true
brcm,scb-sizes:
description: u64 giving the 64bit PCIe memory
viewport size of a memory controller. There may be up to
three controllers, and each size must be a power of two
with a size greater or equal to the amount of memory the
controller supports. Note that each memory controller
may have two component regions -- base and extended -- so
this information cannot be deduced from the dma-ranges.
$ref: /schemas/types.yaml#/definitions/uint64-array
items:
minItems: 1
maxItems: 3
required:
- compatible
- reg
- ranges
- dma-ranges
- "#interrupt-cells"
- interrupts
- interrupt-names
- interrupt-map-mask
- interrupt-map
- msi-controller
allOf:
- $ref: /schemas/pci/pci-bus.yaml#
- $ref: /schemas/interrupt-controller/msi-controller.yaml#
- if:
properties:
compatible:
contains:
const: brcm,bcm4908-pcie
then:
properties:
resets:
items:
- description: reset controller handling the PERST# signal
reset-names:
items:
- const: perst
required:
- resets
- reset-names
- if:
properties:
compatible:
contains:
const: brcm,bcm7216-pcie
then:
properties:
resets:
items:
- description: phandle pointing to the RESCAL reset controller
reset-names:
items:
- const: rescal
required:
- resets
- reset-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
scb {
#address-cells = <2>;
#size-cells = <1>;
pcie0: pcie@7d500000 {
compatible = "brcm,bcm2711-pcie";
reg = <0x0 0x7d500000 0x9310>;
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pcie", "msi";
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
msi-parent = <&pcie0>;
msi-controller;
ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>,
<0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>;
brcm,enable-ssc;
brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>;
/* PCIe bridge, Root Port */
pci@0,0 {
#address-cells = <3>;
#size-cells = <2>;
reg = <0x0 0x0 0x0 0x0 0x0>;
compatible = "pciclass,0604";
device_type = "pci";
vpcie3v3-supply = <&vreg7>;
ranges;
/* PCIe endpoint */
pci-ep@0,0 {
assigned-addresses =
<0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>;
reg = <0x0 0x0 0x0 0x0 0x0>;
compatible = "pci14e4,1688";
};
};
};
};
|
