1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
|
Bitmain BM1880 Pin Controller
This binding describes the pin controller found in the BM1880 SoC.
Required Properties:
- compatible: Should be "bitmain,bm1880-pinctrl"
- reg: Offset and length of pinctrl space in SCTRL.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration for BM1880 SoC
includes pinmux and various pin configuration parameters, such as pull-up,
slew rate etc...
Each configuration node can consist of multiple nodes describing the pinmux
options. The name of each subnode is not important; all subnodes should be
enumerated and processed purely based on their content.
The following generic properties as defined in pinctrl-bindings.txt are valid
to specify in a pinmux subnode:
Required Properties:
- pins: An array of strings, each string containing the name of a pin.
Valid values for pins are:
MIO0 - MIO111
- groups: An array of strings, each string containing the name of a pin
group. Valid values for groups are:
nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp,
pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp,
pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp,
pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp,
pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp,
pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp,
pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp,
pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp,
i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp,
uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp,
uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp,
uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp,
gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp,
gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp,
gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp,
gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp,
gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp,
gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp,
gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp,
gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp,
gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp,
gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp,
gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp,
gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp,
gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp,
gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp,
i2s1_grp, i2s1_mclkin_grp, spi0_grp
- function: An array of strings, each string containing the name of the
pinmux functions. The following are the list of pinmux
functions available:
nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4,
pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13,
pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22,
pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31,
pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3,
i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7,
uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15,
gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8,
gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16,
gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23,
gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30,
gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37,
gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44,
gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51,
gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58,
gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65,
gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin,
spi0
Optional Properties:
- bias-disable: No arguments. Disable pin bias.
- bias-pull-down: No arguments. The specified pins should be configured as
pull down.
- bias-pull-up: No arguments. The specified pins should be configured as
pull up.
- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified
pins
- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified
pins
- slew-rate: Integer. Sets slew rate for the specified pins.
Valid values are:
<0> - Slow
<1> - Fast
- drive-strength: Integer. Selects the drive strength for the specified
pins in mA.
Valid values are:
<4>
<8>
<12>
<16>
<20>
<24>
<28>
<32>
Example:
pinctrl: pinctrl@400 {
compatible = "bitmain,bm1880-pinctrl";
reg = <0x400 0x120>;
pinctrl_uart0_default: uart0-default {
pinmux {
groups = "uart0_grp";
function = "uart0";
};
};
};
|
