1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8188-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek MT8188 Pin Controller
maintainers:
- Hui Liu <hui.liu@mediatek.com>
description: |
The MediaTek's MT8188 Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8188-pinctrl
gpio-controller: true
'#gpio-cells':
description: |
Number of cells in GPIO specifier, should be two. The first cell
is the pin number, the second cell is used to specify optional
parameters which are defined in <dt-bindings/gpio/gpio.h>.
const: 2
gpio-ranges:
maxItems: 1
gpio-line-names: true
reg:
items:
- description: gpio registers base address
- description: rm group io configuration registers base address
- description: lt group io configuration registers base address
- description: lm group io configuration registers base address
- description: rt group io configuration registers base address
- description: eint registers base address
reg-names:
items:
- const: iocfg0
- const: iocfg_rm
- const: iocfg_lt
- const: iocfg_lm
- const: iocfg_rt
- const: eint
interrupt-controller: true
'#interrupt-cells':
const: 2
interrupts:
description: The interrupt outputs to sysirq.
maxItems: 1
mediatek,rsel-resistance-in-si-unit:
type: boolean
description: |
We provide two methods to select the resistance for I2C when pull up or pull down.
The first is by RSEL definition value, another one is by resistance value(ohm).
This flag is used to identify if the method is resistance(si unit) value.
# PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'^pins':
type: object
$ref: "/schemas/pinctrl/pincfg-node.yaml"
additionalProperties: false
description: |
A pinctrl node should contain at least one subnode representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and
input schmitt.
properties:
pinmux:
description: |
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are
defined as macros in dt-bindings/pinctrl/mediatek,<soc>-pinfunc.h
directly.
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
drive-strength-microamp:
enum: [125, 250, 500, 1000]
bias-pull-down:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8188 pull down PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
description: mt8188 pull down RSEL type define value.
- enum: [75000, 5000]
description: mt8188 pull down RSEL type si unit value(ohm).
description: |
For pull down type is normal, it doesn't need add RSEL & R1R0 define
and resistance value.
For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
define in mt8188.
For pull down type is RSEL, it can add RSEL define & resistance value(ohm)
to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
& "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
define in mt8188. It can also support resistance value(ohm) "75000" & "5000" in mt8188.
bias-pull-up:
oneOf:
- type: boolean
- enum: [100, 101, 102, 103]
description: mt8188 pull up PUPD/R0/R1 type define value.
- enum: [200, 201, 202, 203, 204, 205, 206, 207]
description: mt8188 pull up RSEL type define value.
- enum: [1000, 1500, 2000, 3000, 4000, 5000, 10000, 75000]
description: mt8188 pull up RSEL type si unit value(ohm).
description: |
For pull up type is normal, it don't need add RSEL & R1R0 define
and resistance value.
For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
"MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11"
define in mt8188.
For pull up type is RSEL, it can add RSEL define & resistance value(ohm)
to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit".
It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
& "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100"
& "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111"
define in mt8188. It can also support resistance value(ohm)
"1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188.
bias-disable: true
output-high: true
output-low: true
input-enable: true
input-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
required:
- pinmux
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pio: pinctrl@10005000 {
compatible = "mediatek,mt8188-pinctrl";
reg = <0x10005000 0x1000>,
<0x11c00000 0x1000>,
<0x11e10000 0x1000>,
<0x11e20000 0x1000>,
<0x11ea0000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "iocfg0", "iocfg_rm",
"iocfg_lt", "iocfg_lm", "iocfg_rt",
"eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 176>;
interrupt-controller;
interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>;
#interrupt-cells = <2>;
pio-pins {
pins {
pinmux = <PINMUX_GPIO0__FUNC_B_GPIO0>;
output-low;
};
};
spi0-pins {
pins-spi {
pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
<PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
<PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>;
drive-strength = <6>;
};
pins-spi-mi {
pinmux = <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
};
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO55__FUNC_B1_SCL0>,
<PINMUX_GPIO56__FUNC_B1_SDA0>;
bias-disable;
drive-strength-microamp = <1000>;
};
};
};
|
