blob: e6e4b9c82d8902a1a4a5f806fd4c0b2b5f891437 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
|
* Powerventure Semiconductor PV88080 Voltage Regulator
Required properties:
- compatible: Must be one of the following, depending on the
silicon version:
- "pvs,pv88080" (DEPRECATED)
- "pvs,pv88080-aa" for PV88080 AA or AB silicon
- "pvs,pv88080-ba" for PV88080 BA or BB silicon
NOTE: The use of the compatibles with no silicon version is deprecated.
- reg: I2C slave address, usually 0x49
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
values listed below. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
BUCK1, BUCK2, BUCK3 and HVBUCK.
Optional properties:
- Any optional property defined in regulator.txt
Example:
pmic: pv88080@49 {
compatible = "pvs,pv88080-ba";
reg = <0x49>;
interrupt-parent = <&gpio>;
interrupts = <24 24>;
regulators {
BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1393750>;
regulator-min-microamp = < 220000>;
regulator-max-microamp = <7040000>;
};
BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1393750>;
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
};
BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <1400000>;
regulator-max-microvolt = <2193750>;
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
};
HVBUCK {
regulator-name = "hvbuck";
regulator-min-microvolt = < 5000>;
regulator-max-microvolt = <1275000>;
};
};
};
|
