1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
|
RT5651 audio CODEC
This device supports I2C only.
Required properties:
- compatible : "realtek,rt5651".
- reg : The I2C address of the device.
Optional properties:
- realtek,in2-differential
Boolean. Indicate MIC2 input are differential, rather than single-ended.
- realtek,dmic-en
Boolean. true if dmic is used.
- realtek,jack-detect-source
u32. Valid values:
1: Use JD1_1 pin for jack-detect
2: Use JD1_2 pin for jack-detect
3: Use JD2 pin for jack-detect
- realtek,jack-detect-not-inverted
bool. Normal jack-detect switches give an inverted (active-low) signal,
set this bool in the rare case you've a jack-detect switch which is not
inverted.
- realtek,over-current-threshold-microamp
u32, micbias over-current detection threshold in µA, valid values are
600, 1500 and 2000µA.
- realtek,over-current-scale-factor
u32, micbias over-current detection scale-factor, valid values are:
0: Scale current by 0.5
1: Scale current by 0.75
2: Scale current by 1.0
3: Scale current by 1.5
Pins on the device (for linking into audio routes) for RT5651:
* DMIC L1
* DMIC R1
* IN1P
* IN2P
* IN2N
* IN3P
* HPOL
* HPOR
* LOUTL
* LOUTR
* PDML
* PDMR
Example:
rt5651: codec@1a {
compatible = "realtek,rt5651";
reg = <0x1a>;
realtek,dmic-en = "true";
realtek,in2-diff = "false";
};
|
