blob: a02ecaab518327d5b3a81f5344787325ca01fdec (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
|
Texas Instruments pcm3168a DT bindings
This driver supports both SPI and I2C bus access for this codec
Required properties:
- compatible: "ti,pcm3168a"
- clocks : Contains an entry for each entry in clock-names
- clock-names : Includes the following entries:
"scki" The system clock
- VDD1-supply : Digital power supply regulator 1 (+3.3V)
- VDD2-supply : Digital power supply regulator 2 (+3.3V)
- VCCAD1-supply : ADC power supply regulator 1 (+5V)
- VCCAD2-supply : ADC power supply regulator 2 (+5V)
- VCCDA1-supply : DAC power supply regulator 1 (+5V)
- VCCDA2-supply : DAC power supply regulator 2 (+5V)
For required properties on SPI/I2C, consult SPI/I2C device tree documentation
Optional properties:
- reset-gpios : Optional reset gpio line connected to RST pin of the codec.
The RST line is low active:
RST = low: device power-down
RST = high: device is enabled
Examples:
i2c0: i2c0@0 {
...
pcm3168a: audio-codec@44 {
compatible = "ti,pcm3168a";
reg = <0x44>;
reset-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
clocks = <&clk_core CLK_AUDIO>;
clock-names = "scki";
VDD1-supply = <&supply3v3>;
VDD2-supply = <&supply3v3>;
VCCAD1-supply = <&supply5v0>;
VCCAD2-supply = <&supply5v0>;
VCCDA1-supply = <&supply5v0>;
VCCDA2-supply = <&supply5v0>;
pinctrl-names = "default";
pinctrl-0 = <&dac_clk_pin>;
};
};
|
