1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* linux/arch/arm/mm/proc-fa526.S: MMU functions for FA526
*
* Written by : Luke Lee
* Copyright (C) 2005 Faraday Corp.
* Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
*
* These are the low level assembler for performing cache and TLB
* functions on the fa526.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/pgtable.h>
#include <asm/assembler.h>
#include <asm/hwcap.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include "proc-macros.S"
#define CACHE_DLINESIZE 16
.text
/*
* cpu_fa526_proc_init()
*/
ENTRY(cpu_fa526_proc_init)
ret lr
/*
* cpu_fa526_proc_fin()
*/
ENTRY(cpu_fa526_proc_fin)
mrc p15, 0, r0, c1, c0, 0 @ ctrl register
bic r0, r0, #0x1000 @ ...i............
bic r0, r0, #0x000e @ ............wca.
mcr p15, 0, r0, c1, c0, 0 @ disable caches
nop
nop
ret lr
/*
* cpu_fa526_reset(loc)
*
* Perform a soft reset of the system. Put the CPU into the
* same state as it would be if it had been reset, and branch
* to what would be the reset vector.
*
* loc: location to jump to for soft reset
*/
.align 4
.pushsection .idmap.text, "ax"
ENTRY(cpu_fa526_reset)
/* TODO: Use CP8 if possible... */
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
mcr p15, 0, ip, c7, c10, 4 @ drain WB
#ifdef CONFIG_MMU
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
#endif
mrc p15, 0, ip, c1, c0, 0 @ ctrl register
bic ip, ip, #0x000f @ ............wcam
bic ip, ip, #0x1100 @ ...i...s........
bic ip, ip, #0x0800 @ BTB off
mcr p15, 0, ip, c1, c0, 0 @ ctrl register
nop
nop
ret r0
ENDPROC(cpu_fa526_reset)
.popsection
/*
* cpu_fa526_do_idle()
*/
.align 4
ENTRY(cpu_fa526_do_idle)
ret lr
ENTRY(cpu_fa526_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
subs r1, r1, #CACHE_DLINESIZE
bhi 1b
mcr p15, 0, r0, c7, c10, 4 @ drain WB
ret lr
/* =============================== PageTable ============================== */
/*
* cpu_fa526_switch_mm(pgd)
*
* Set the translation base pointer to be as described by pgd.
*
* pgd: new page tables
*/
.align 4
ENTRY(cpu_fa526_switch_mm)
#ifdef CONFIG_MMU
mov ip, #0
#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
#else
mcr p15, 0, ip, c7, c14, 0 @ clean and invalidate whole D cache
#endif
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c5, 6 @ invalidate BTB since mm changed
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
mcr p15, 0, ip, c7, c5, 4 @ prefetch flush
mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
mcr p15, 0, ip, c8, c7, 0 @ invalidate UTLB
#endif
ret lr
/*
* cpu_fa526_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*/
.align 4
ENTRY(cpu_fa526_set_pte_ext)
#ifdef CONFIG_MMU
armv3_set_pte_ext
mov r0, r0
mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain WB
#endif
ret lr
.type __fa526_setup, #function
__fa526_setup:
/* On return of this routine, r0 must carry correct flags for CFG register */
mov r0, #0
mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
#ifdef CONFIG_MMU
mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
#endif
mcr p15, 0, r0, c7, c5, 5 @ invalidate IScratchpad RAM
mov r0, #1
mcr p15, 0, r0, c1, c1, 0 @ turn-on ECR
mov r0, #0
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB All
mcr p15, 0, r0, c7, c10, 4 @ data write barrier
mcr p15, 0, r0, c7, c5, 4 @ prefetch flush
mov r0, #0x1f @ Domains 0, 1 = manager, 2 = client
mcr p15, 0, r0, c3, c0 @ load domain access register
mrc p15, 0, r0, c1, c0 @ get control register v4
ldr r5, fa526_cr1_clear
bic r0, r0, r5
ldr r5, fa526_cr1_set
orr r0, r0, r5
ret lr
.size __fa526_setup, . - __fa526_setup
/*
* .RVI ZFRS BLDP WCAM
* ..11 1001 .111 1101
*
*/
.type fa526_cr1_clear, #object
.type fa526_cr1_set, #object
fa526_cr1_clear:
.word 0x3f3f
fa526_cr1_set:
.word 0x397D
__INITDATA
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
.section ".rodata"
string cpu_arch_name, "armv4"
string cpu_elf_name, "v4"
string cpu_fa526_name, "FA526"
.align
.section ".proc.info.init", "a"
.type __fa526_proc_info,#object
__fa526_proc_info:
.long 0x66015261
.long 0xff01fff1
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __fa526_setup, __fa526_proc_info
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF
.long cpu_fa526_name
.long fa526_processor_functions
.long fa_tlb_fns
.long fa_user_fns
.long fa_cache_fns
.size __fa526_proc_info, . - __fa526_proc_info
|
