1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
|
// SPDX-License-Identifier: GPL-2.0-only
#include <dt-bindings/leds/rt4831-backlight.h>
#include <linux/backlight.h>
#include <linux/bitops.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#define RT4831_REG_BLCFG 0x02
#define RT4831_REG_BLDIML 0x04
#define RT4831_REG_ENABLE 0x08
#define RT4831_REG_BLOPT2 0x11
#define RT4831_BLMAX_BRIGHTNESS 2048
#define RT4831_BLOVP_MASK GENMASK(7, 5)
#define RT4831_BLOVP_SHIFT 5
#define RT4831_BLPWMEN_MASK BIT(0)
#define RT4831_BLEN_MASK BIT(4)
#define RT4831_BLCH_MASK GENMASK(3, 0)
#define RT4831_BLDIML_MASK GENMASK(2, 0)
#define RT4831_BLDIMH_MASK GENMASK(10, 3)
#define RT4831_BLDIMH_SHIFT 3
#define RT4831_BLOCP_MASK GENMASK(1, 0)
#define RT4831_BLOCP_MINUA 900000
#define RT4831_BLOCP_MAXUA 1800000
#define RT4831_BLOCP_STEPUA 300000
struct rt4831_priv {
struct device *dev;
struct regmap *regmap;
struct backlight_device *bl;
};
static int rt4831_bl_update_status(struct backlight_device *bl_dev)
{
struct rt4831_priv *priv = bl_get_data(bl_dev);
int brightness = backlight_get_brightness(bl_dev);
unsigned int enable = brightness ? RT4831_BLEN_MASK : 0;
u8 v[2];
int ret;
if (brightness) {
v[0] = (brightness - 1) & RT4831_BLDIML_MASK;
v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT;
ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
if (ret)
return ret;
}
return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable);
}
static int rt4831_bl_get_brightness(struct backlight_device *bl_dev)
{
struct rt4831_priv *priv = bl_get_data(bl_dev);
unsigned int val;
u8 v[2];
int ret;
ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val);
if (ret)
return ret;
if (!(val & RT4831_BLEN_MASK))
return 0;
ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
if (ret)
return ret;
ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1;
return ret;
}
static const struct backlight_ops rt4831_bl_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = rt4831_bl_update_status,
.get_brightness = rt4831_bl_get_brightness,
};
static int rt4831_parse_backlight_properties(struct rt4831_priv *priv,
struct backlight_properties *bl_props)
{
struct device *dev = priv->dev;
u8 propval;
u32 brightness, ocp_uA;
unsigned int val = 0;
int ret;
/* common properties */
ret = device_property_read_u32(dev, "max-brightness", &brightness);
if (ret)
brightness = RT4831_BLMAX_BRIGHTNESS;
bl_props->max_brightness = min_t(u32, brightness, RT4831_BLMAX_BRIGHTNESS);
ret = device_property_read_u32(dev, "default-brightness", &brightness);
if (ret)
brightness = bl_props->max_brightness;
bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness);
/* vendor properties */
if (device_property_read_bool(dev, "richtek,pwm-enable"))
val = RT4831_BLPWMEN_MASK;
ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val);
if (ret)
return ret;
ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval);
if (ret)
propval = RT4831_BLOVPLVL_21V;
propval = min_t(u8, propval, RT4831_BLOVPLVL_29V);
ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK,
propval << RT4831_BLOVP_SHIFT);
if (ret)
return ret;
/*
* This OCP level is used to protect and limit the inductor current.
* If inductor peak current reach the level, low-side MOSFET will be
* turned off. Meanwhile, the output channel current may be limited.
* To match the configured channel current, the inductor chosen must
* be higher than the OCP level.
*
* Not like the OVP level, the default 21V can be used in the most
* application. But if the chosen OCP level is smaller than needed,
* it will also affect the backlight channel output current to be
* smaller than the register setting.
*/
ret = device_property_read_u32(dev, "richtek,bled-ocp-microamp",
&ocp_uA);
if (!ret) {
ocp_uA = clamp_val(ocp_uA, RT4831_BLOCP_MINUA,
RT4831_BLOCP_MAXUA);
val = DIV_ROUND_UP(ocp_uA - RT4831_BLOCP_MINUA,
RT4831_BLOCP_STEPUA);
ret = regmap_update_bits(priv->regmap, RT4831_REG_BLOPT2,
RT4831_BLOCP_MASK, val);
if (ret)
return ret;
}
ret = device_property_read_u8(dev, "richtek,channel-use", &propval);
if (ret) {
dev_err(dev, "richtek,channel-use DT property missing\n");
return ret;
}
if (!(propval & RT4831_BLCH_MASK)) {
dev_err(dev, "No channel specified\n");
return -EINVAL;
}
return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval);
}
static int rt4831_bl_probe(struct platform_device *pdev)
{
struct rt4831_priv *priv;
struct backlight_properties bl_props = { .type = BACKLIGHT_RAW,
.scale = BACKLIGHT_SCALE_LINEAR };
int ret;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->dev = &pdev->dev;
priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
if (!priv->regmap) {
dev_err(&pdev->dev, "Failed to init regmap\n");
return -ENODEV;
}
ret = rt4831_parse_backlight_properties(priv, &bl_props);
if (ret) {
dev_err(&pdev->dev, "Failed to parse backlight properties\n");
return ret;
}
priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv,
&rt4831_bl_ops, &bl_props);
if (IS_ERR(priv->bl)) {
dev_err(&pdev->dev, "Failed to register backlight\n");
return PTR_ERR(priv->bl);
}
backlight_update_status(priv->bl);
platform_set_drvdata(pdev, priv);
return 0;
}
static int rt4831_bl_remove(struct platform_device *pdev)
{
struct rt4831_priv *priv = platform_get_drvdata(pdev);
struct backlight_device *bl_dev = priv->bl;
bl_dev->props.brightness = 0;
backlight_update_status(priv->bl);
return 0;
}
static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = {
{ .compatible = "richtek,rt4831-backlight", },
{}
};
MODULE_DEVICE_TABLE(of, rt4831_bl_of_match);
static struct platform_driver rt4831_bl_driver = {
.driver = {
.name = "rt4831-backlight",
.of_match_table = rt4831_bl_of_match,
},
.probe = rt4831_bl_probe,
.remove = rt4831_bl_remove,
};
module_platform_driver(rt4831_bl_driver);
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
MODULE_LICENSE("GPL v2");
|
