Adding upstream version 1:10.11.6.upstream/1%10.11.6upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 385 insertions, 0 deletions

diff --git a/mysql-test/suite/rpl/t/rpl_user_variables.test b/mysql-test/suite/rpl/t/rpl_user_variables.test
new file mode 100644
index 00000000..08d9b4ae
--- /dev/null
+++ b/mysql-test/suite/rpl/t/rpl_user_variables.test
@@ -0,0 +1,385 @@
+###################################
+#
+# Test of replicating user variables
+#
+###################################
+
+-- source include/master-slave.inc
+
+disable_query_log;
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+enable_query_log;
+
+# Disable PS as the log positions differs
+--disable_ps_protocol
+
+
+# Clean up old slave's binlogs.
+# The slave is started with --log-slave-updates
+# and this test does SHOW BINLOG EVENTS on the slave's
+# binlog. But previous tests can influence the current test's
+# binlog (e.g. a temporary table in the previous test has not
+# been explicitly deleted, or it has but the slave hasn't had
+# enough time to catch it before STOP SLAVE, 
+# and at the beginning of the current
+# test the slave immediately writes DROP TEMPORARY TABLE this_old_table).
+# We wait for the slave to have written all he wants to the binlog
+# (otherwise RESET MASTER may come too early).
+sync_slave_with_master;
+reset master;
+connection master;
+
+create table t1(n char(30));
+set @i1:=12345678901234, @i2:=-12345678901234, @i3:=0, @i4:=-1;
+set @s1:='This is a test', @r1:=12.5, @r2:=-12.5;
+set @n1:=null;
+set @s2:='', @s3:='abc\'def', @s4:= 'abc\\def', @s5:= 'abc''def';
+insert into t1 values (@i1), (@i2), (@i3), (@i4);
+insert into t1 values (@r1), (@r2);
+insert into t1 values (@s1), (@s2), (@s3), (@s4), (@s5);
+insert into t1 values (@n1);
+insert into t1 values (@n2); # not explicitly set before
+insert into t1 values (@a:=0), (@a:=@a+1), (@a:=@a+1);
+insert into t1 values (@a+(@b:=@a+1));
+set @q:='abc';
+insert t1 values (@q), (@q:=concat(@q, 'n1')), (@q:=concat(@q, 'n2'));
+set @a:=5;
+insert into t1 values (@a),(@a);
+# To flush the pending event, we add the following statement. RBR can
+# concatenate the result of several statements, which SBR cannot.
+select * from t1 where n = '<nonexistant>';
+connection master1; # see if variable is reset in binlog when thread changes
+insert into t1 values (@a),(@a),(@a*5);
+SELECT * FROM t1 ORDER BY n;
+sync_slave_with_master;
+SELECT * FROM t1 ORDER BY n;
+connection master;
+insert into t1 select * FROM (select @var1 union  select @var2) AS t2;
+drop table t1;
+--echo End of 4.1 tests.
+
+# BUG#20141
+# The following tests ensure that if user-defined variables are used in SF/Triggers 
+# that they are replicated correctly. These tests should be run in both SBR and RBR 
+# modes.
+
+# This test uses a procedure that inserts data values based on the value of a 
+# user-defined variable. It also has a trigger that inserts data based on the 
+# same variable. Successful test runs show that the @var is replicated 
+# properly and that the procedure and trigger insert the correct data on the 
+# slave.
+#
+# The test of stored procedure was included for completeness. Replication of stored 
+# procedures was not directly affected by BUG#20141.
+#
+# This test was constructed for BUG#20141
+
+--disable_warnings
+DROP TABLE IF EXISTS t20;
+DROP TABLE IF EXISTS t21;
+DROP PROCEDURE IF EXISTS test.insert;
+--enable_warnings
+
+CREATE TABLE t20 (a VARCHAR(20));
+CREATE TABLE t21 (a VARCHAR(20));
+DELIMITER |;
+
+# Create a procedure that uses the @var for flow control
+
+CREATE PROCEDURE test.insert()
+BEGIN
+  IF (@VAR)
+  THEN
+      INSERT INTO test.t20 VALUES ('SP_TRUE');
+  ELSE
+      INSERT INTO test.t20 VALUES ('SP_FALSE');
+  END IF;
+END|
+
+# Create a trigger that uses the @var for flow control
+
+CREATE TRIGGER test.insert_bi BEFORE INSERT
+    ON test.t20 FOR EACH ROW
+    BEGIN
+      IF (@VAR)
+      THEN
+        INSERT INTO test.t21 VALUES ('TRIG_TRUE');
+      ELSE
+        INSERT INTO test.t21 VALUES ('TRIG_FALSE');
+      END IF;
+    END|
+DELIMITER ;|
+
+sync_slave_with_master;
+connection master;
+
+# Set @var and call the procedure, repeat with different values
+
+SET @VAR=0;
+CALL test.insert();
+SET @VAR=1;
+CALL test.insert();
+
+--echo Check the tables for correct data
+
+SELECT * FROM t20;
+SELECT * FROM t21;
+
+sync_slave_with_master;
+
+--echo Check the tables for correct data and it matches master
+
+SELECT * FROM t20;
+SELECT * FROM t21;
+connection master;
+
+# Cleanup
+
+DROP TABLE t20;
+DROP TABLE t21;
+DROP PROCEDURE test.insert;
+
+# This test uses a stored function that uses user-defined variables to return data 
+# This test was constructed for BUG#20141
+
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+DROP FUNCTION IF EXISTS test.square;
+--enable_warnings
+
+CREATE TABLE t1 (i INT);
+
+# Create function that returns a value from @var. In this case, the square function
+
+CREATE FUNCTION test.square() RETURNS INTEGER DETERMINISTIC RETURN 
+(@var * @var);
+
+# Set the @var to different values and insert them into a table
+
+SET @var = 1;
+INSERT INTO t1 VALUES (square());
+SET @var = 2;
+INSERT INTO t1 VALUES (square());
+SET @var = 3;
+INSERT INTO t1 VALUES (square());
+SET @var = 4;
+INSERT INTO t1 VALUES (square());
+SET @var = 5;
+INSERT INTO t1 VALUES (square());
+
+--echo Retrieve the values from the table
+
+SELECT * FROM t1;
+
+sync_slave_with_master;
+
+--echo Retrieve the values from the table and verify they are the same as on master
+
+SELECT * FROM t1;
+
+connection master;
+
+# Cleanup
+
+DROP TABLE t1;
+DROP FUNCTION test.square;
+
+# This test uses stored functions that uses user-defined variables to return data 
+# based on the use of @vars inside a function body.
+# This test was constructed for BUG#14914
+
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+DROP FUNCTION IF EXISTS f1;
+DROP FUNCTION IF EXISTS f2;
+--enable_warnings
+
+CREATE TABLE t1(a int);
+DELIMITER |;
+
+# Create a function that simply returns the value of an @var.
+# Create a function that uses an @var for flow control, creates and uses another 
+# @var and sets its value to a value based on another @var.
+
+CREATE FUNCTION f1() returns int deterministic BEGIN
+  return @a;
+END |
+
+CREATE FUNCTION f2() returns int deterministic BEGIN
+  IF (@b > 0) then
+    SET @c = (@a + @b);
+  else
+    SET @c = (@a - 1);
+  END if;
+  return @c;
+END |
+DELIMITER ;|
+
+sync_slave_with_master;
+connection master;
+
+# Set an @var to a value and insert data into a table using the first function.
+# Set two more @vars to some values and insert data into a table using the second function.
+
+SET @a=500;
+INSERT INTO t1 values(f1());
+SET @b = 125;
+SET @c = 1;
+INSERT INTO t1 values(f2());
+
+--echo Retrieve the values from the table
+
+sync_slave_with_master;
+connection master;
+
+SELECT * from t1;
+
+connection slave;
+
+--echo Check the tables for correct data and it matches master
+
+SELECT * from t1;
+
+connection master;
+
+# Cleanup
+
+DROP TABLE t1;
+DROP FUNCTION f1;
+DROP FUNCTION f2;
+
+# This test uses a function that changes a user-defined variable in its body. This test 
+# will ensure the @vars are replicated when needed and not interrupt the normal execution 
+# of the function on the slave. This also applies to procedures and triggers.
+
+# This test was constructed for BUG#25167
+
+--disable_warnings
+DROP TABLE IF EXISTS t1;
+DROP TABLE IF EXISTS t2;
+--enable_warnings
+CREATE TABLE t1 (i int);
+CREATE TABLE t2 (k int);
+DELIMITER |;
+
+# Create a trigger that inserts data into another table, changes the @var then inserts 
+# another row with the modified value.
+
+CREATE trigger t1_bi before INSERT on t1 for each row BEGIN
+  INSERT INTO t2 values (@a);
+  SET @a:=42;
+  INSERT INTO t2 values (@a);
+END |
+DELIMITER ;|
+
+sync_slave_with_master;
+connection master;
+
+# Set the @var to a value then insert data into first table.
+
+SET @a:=100;
+INSERT INTO t1 values (5);
+
+--echo Check to see that data was inserted correctly in both tables
+
+SELECT * from t1;
+SELECT * from t2;
+
+sync_slave_with_master;
+
+--echo Check the tables for correct data and it matches master
+
+SELECT * from t1;
+SELECT * from t2;
+
+connection master;
+drop table t1, t2;
+
+#
+# Bug #12826: Possible to get inconsistent slave using SQL syntax Prepared Statements
+#
+connection master;
+create table t1(a int, b int);
+prepare s1 from 'insert into t1 values (@x:=@x+1, ?)';
+set @x=1; execute s1 using @x;
+select * from t1;
+sync_slave_with_master;
+connection slave;
+select * from t1;
+connection master;
+drop table t1;
+
+#
+# Bug#33851: Passing UNSIGNED param to EXECUTE returns ERROR 1210
+#
+
+connection master;
+create table t1(a int);
+insert into t1 values (1),(2);
+prepare s1 from 'insert into t1 select a from t1 limit ?';
+set @x='1.1';
+--disable_warnings
+execute s1 using @x;
+--enable_warnings
+select * from t1;
+sync_slave_with_master;
+connection slave;
+select * from t1;
+connection master;
+drop table t1;
+
+--echo End of 5.0 tests.
+
+# This test uses a stored function that uses user-defined variables to return data 
+# The test ensures the value of the user-defined variable is replicated correctly 
+# and in the correct order of assignment.
+
+# This test was constructed for BUG#20141
+
+--disable_warnings
+DROP FUNCTION IF EXISTS f1;
+DROP FUNCTION IF EXISTS f2;
+--enable_warnings
+
+CREATE TABLE t1 (i INT);
+
+# Create two functions. One simply returns the user-defined variable. The other 
+# returns a value based on the user-defined variable.
+
+CREATE FUNCTION f1() RETURNS INT RETURN @a; DELIMITER |; CREATE 
+FUNCTION f2() RETURNS INT BEGIN
+  INSERT INTO t1 VALUES (10 + @a);
+  RETURN 0;
+END|
+DELIMITER ;|
+
+sync_slave_with_master;
+connection master;
+
+# Set the variable and execute the functions.
+
+SET @a:=123;
+SELECT f1(), f2();
+
+--echo Check to see that data was inserted correctly
+
+INSERT INTO t1 VALUES(f1());
+SELECT * FROM t1;
+
+sync_slave_with_master;
+
+--echo Check the table for correct data and it matches master
+
+SELECT * FROM t1;
+
+connection master;
+
+# Cleanup
+
+DROP FUNCTION f1;
+DROP FUNCTION f2;
+DROP TABLE t1;
+
+sync_slave_with_master;
+
+--source include/rpl_end.inc