diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-05-04 14:31:17 +0000 |
commit | 8020f71afd34d7696d7933659df2d763ab05542f (patch) | |
tree | 2fdf1b5447ffd8bdd61e702ca183e814afdcb4fc /collectors/charts.d.plugin/ap/README.md | |
parent | Initial commit. (diff) | |
download | netdata-upstream.tar.xz netdata-upstream.zip |
Adding upstream version 1.37.1.upstream/1.37.1upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'collectors/charts.d.plugin/ap/README.md')
-rw-r--r-- | collectors/charts.d.plugin/ap/README.md | 99 |
1 files changed, 99 insertions, 0 deletions
diff --git a/collectors/charts.d.plugin/ap/README.md b/collectors/charts.d.plugin/ap/README.md new file mode 100644 index 0000000..a7953a5 --- /dev/null +++ b/collectors/charts.d.plugin/ap/README.md @@ -0,0 +1,99 @@ +<!-- +title: "Access point monitoring with Netdata" +custom_edit_url: https://github.com/netdata/netdata/edit/master/collectors/charts.d.plugin/ap/README.md +sidebar_label: "Access points" +--> + +# Access point monitoring with Netdata + +The `ap` collector visualizes data related to access points. + +## Example Netdata charts + +![image](https://cloud.githubusercontent.com/assets/2662304/12377654/9f566e88-bd2d-11e5-855a-e0ba96b8fd98.png) + +## How it works + +It does the following: + +1. Runs `iw dev` searching for interfaces that have `type AP`. + + From the same output it collects the SSIDs each AP supports by looking for lines `ssid NAME`. + + Example: + +```sh +# iw dev +phy#0 + Interface wlan0 + ifindex 3 + wdev 0x1 + addr 7c:dd:90:77:34:2a + ssid TSAOUSIS + type AP + channel 7 (2442 MHz), width: 20 MHz, center1: 2442 MHz +``` + +2. For each interface found, it runs `iw INTERFACE station dump`. + + From the output is collects: + + - rx/tx bytes + - rx/tx packets + - tx retries + - tx failed + - signal strength + - rx/tx bitrate + - expected throughput + + Example: + +```sh +# iw wlan0 station dump +Station 40:b8:37:5a:ed:5e (on wlan0) + inactive time: 910 ms + rx bytes: 15588897 + rx packets: 127772 + tx bytes: 52257763 + tx packets: 95802 + tx retries: 2162 + tx failed: 28 + signal: -43 dBm + signal avg: -43 dBm + tx bitrate: 65.0 MBit/s MCS 7 + rx bitrate: 1.0 MBit/s + expected throughput: 32.125Mbps + authorized: yes + authenticated: yes + preamble: long + WMM/WME: yes + MFP: no + TDLS peer: no +``` + +3. For each interface found, it creates 6 charts: + + - Number of Connected clients + - Bandwidth for all clients + - Packets for all clients + - Transmit Issues for all clients + - Average Signal among all clients + - Average Bitrate (including average expected throughput) among all clients + +## Configuration + +Edit the `charts.d/ap.conf` configuration file using `edit-config` from the Netdata [config +directory](/docs/configure/nodes.md), which is typically at `/etc/netdata`. + +```bash +cd /etc/netdata # Replace this path with your Netdata config directory, if different +sudo ./edit-config charts.d/ap.conf +``` + +You can only set `ap_update_every=NUMBER` to change the data collection frequency. + +## Auto-detection + +The plugin is able to auto-detect if you are running access points on your linux box. + + |