1 files changed, 119 insertions, 0 deletions
diff --git a/doc/pdlzip.1 b/doc/pdlzip.1
new file mode 100644
index 0000000..57a144f
--- /dev/null
+++ b/doc/pdlzip.1
@@ -0,0 +1,119 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.16.
+.TH PDLZIP "1" "January 2022" "pdlzip 1.12" "User Commands"
+.SH NAME
+pdlzip \- reduces the size of files
+.SH SYNOPSIS
+.B pdlzip
+[\fI\,options\/\fR] [\fI\,files\/\fR]
+.SH DESCRIPTION
+Pdlzip is a permissively licensed implementation of the lzip data
+compressor, intended for those who can't distribute (or even use) GPL
+licensed Free Software. The name of pdlzip comes from 'public domain lzip'.
+Pdlzip is written in C and is (hope)fully compatible with lzip 1.4 or newer.
+.PP
+Lzip is a lossless data compressor with a user interface similar to the one
+of gzip or bzip2. Lzip uses a simplified form of the 'Lempel\-Ziv\-Markov
+chain\-Algorithm' (LZMA) stream format and provides a 3 factor integrity
+checking to maximize interoperability and optimize safety. Lzip can compress
+about as fast as gzip (lzip \fB\-0\fR) or compress most files more than bzip2
+(lzip \fB\-9\fR). Decompression speed is intermediate between gzip and bzip2.
+Lzip is better than gzip and bzip2 from a data recovery perspective. Lzip
+has been designed, written, and tested with great care to replace gzip and
+bzip2 as the standard general\-purpose compressed format for unix\-like
+systems.
+.PP
+Pdlzip is also able to decompress legacy lzma\-alone (.lzma) files.
+Lzma\-alone is a very bad format; it is essentially a raw LZMA stream.
+If you keep any lzma\-alone files, it is advisable to recompress them to
+lzip format. Lziprecover can convert some lzma\-alone files to lzip format
+without recompressing.
+.SH OPTIONS
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+display this help and exit
+.TP
+\fB\-V\fR, \fB\-\-version\fR
+output version information and exit
+.TP
+\fB\-a\fR, \fB\-\-trailing\-error\fR
+exit with error status if trailing data
+.TP
+\fB\-c\fR, \fB\-\-stdout\fR
+write to standard output, keep input files
+.TP
+\fB\-d\fR, \fB\-\-decompress\fR
+decompress
+.TP
+\fB\-f\fR, \fB\-\-force\fR
+overwrite existing output files
+.TP
+\fB\-F\fR, \fB\-\-recompress\fR
+force re\-compression of compressed files
+.TP
+\fB\-k\fR, \fB\-\-keep\fR
+keep (don't delete) input files
+.TP
+\fB\-m\fR, \fB\-\-match\-length=\fR<bytes>
+set match length limit in bytes [36]
+.TP
+\fB\-o\fR, \fB\-\-output=\fR<file>
+write to <file>, keep input files
+.TP
+\fB\-q\fR, \fB\-\-quiet\fR
+suppress all messages
+.TP
+\fB\-s\fR, \fB\-\-dictionary\-size=\fR<bytes>
+set dictionary size limit in bytes [8 MiB]
+.TP
+\fB\-t\fR, \fB\-\-test\fR
+test compressed file integrity
+.TP
+\fB\-v\fR, \fB\-\-verbose\fR
+be verbose (a 2nd \fB\-v\fR gives more)
+.TP
+\fB\-0\fR .. \fB\-9\fR
+set compression level [default 6]
+.TP
+\fB\-\-fast\fR
+alias for \fB\-0\fR
+.TP
+\fB\-\-best\fR
+alias for \fB\-9\fR
+.TP
+\fB\-\-loose\-trailing\fR
+allow trailing data seeming corrupt header
+.PP
+If no file names are given, or if a file is '\-', pdlzip compresses or
+decompresses from standard input to standard output.
+Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,
+Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
+Dictionary sizes 12 to 27 are interpreted as powers of two, meaning 2^12
+to 2^27 bytes.
+.PP
+The bidimensional parameter space of LZMA can't be mapped to a linear
+scale optimal for all files. If your files are large, very repetitive,
+etc, you may need to use the options \fB\-\-dictionary\-size\fR and \fB\-\-match\-length\fR
+directly to achieve optimal performance. For example, \fB\-9m64\fR usually
+compresses executables more (and faster) than \fB\-9\fR.
+.PP
+To extract all the files from archive 'foo.tar.lz', use the commands
+\&'tar \fB\-xf\fR foo.tar.lz' or 'pdlzip \fB\-cd\fR foo.tar.lz | tar \fB\-xf\fR \-'.
+.PP
+Exit status: 0 for a normal exit, 1 for environmental problems (file
+not found, invalid flags, I/O errors, etc), 2 to indicate a corrupt or
+invalid input file, 3 for an internal consistency error (e.g., bug) which
+caused pdlzip to panic.
+.PP
+Pdlzip includes public domain compression/decompression code from the LZMA
+SDK (Software Development Kit) written by Igor Pavlov.
+.SH "REPORTING BUGS"
+Report bugs to lzip\-bug@nongnu.org
+.br
+Pdlzip home page: http://www.nongnu.org/lzip/pdlzip.html
+.SH COPYRIGHT
+Copyright \(co 2022 Antonio Diaz Diaz.
+Public Domain 2009 Igor Pavlov.
+License 2\-clause BSD.
+.br
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.