Adding upstream version 14.5.upstream/14.5upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 194 insertions, 0 deletions

diff --git a/src/include/libpq/pqcomm.h b/src/include/libpq/pqcomm.h
new file mode 100644
index 0000000..be9d970
--- /dev/null
+++ b/src/include/libpq/pqcomm.h
@@ -0,0 +1,194 @@
+/*-------------------------------------------------------------------------
+ *
+ * pqcomm.h
+ *		Definitions common to frontends and backends.
+ *
+ * NOTE: for historical reasons, this does not correspond to pqcomm.c.
+ * pqcomm.c's routines are declared in libpq.h.
+ *
+ * Portions Copyright (c) 1996-2021, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/libpq/pqcomm.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef PQCOMM_H
+#define PQCOMM_H
+
+#include <sys/socket.h>
+#include <netdb.h>
+#ifdef HAVE_SYS_UN_H
+#include <sys/un.h>
+#endif
+#include <netinet/in.h>
+
+#ifdef HAVE_STRUCT_SOCKADDR_STORAGE
+
+#ifndef HAVE_STRUCT_SOCKADDR_STORAGE_SS_FAMILY
+#ifdef HAVE_STRUCT_SOCKADDR_STORAGE___SS_FAMILY
+#define ss_family __ss_family
+#else
+#error struct sockaddr_storage does not provide an ss_family member
+#endif
+#endif
+
+#ifdef HAVE_STRUCT_SOCKADDR_STORAGE___SS_LEN
+#define ss_len __ss_len
+#define HAVE_STRUCT_SOCKADDR_STORAGE_SS_LEN 1
+#endif
+#else							/* !HAVE_STRUCT_SOCKADDR_STORAGE */
+
+/* Define a struct sockaddr_storage if we don't have one. */
+
+struct sockaddr_storage
+{
+	union
+	{
+		struct sockaddr sa;		/* get the system-dependent fields */
+		int64		ss_align;	/* ensures struct is properly aligned */
+		char		ss_pad[128];	/* ensures struct has desired size */
+	}			ss_stuff;
+};
+
+#define ss_family	ss_stuff.sa.sa_family
+/* It should have an ss_len field if sockaddr has sa_len. */
+#ifdef HAVE_STRUCT_SOCKADDR_SA_LEN
+#define ss_len		ss_stuff.sa.sa_len
+#define HAVE_STRUCT_SOCKADDR_STORAGE_SS_LEN 1
+#endif
+#endif							/* HAVE_STRUCT_SOCKADDR_STORAGE */
+
+typedef struct
+{
+	struct sockaddr_storage addr;
+	ACCEPT_TYPE_ARG3 salen;
+} SockAddr;
+
+/* Configure the UNIX socket location for the well known port. */
+
+#define UNIXSOCK_PATH(path, port, sockdir) \
+	   (AssertMacro(sockdir), \
+		AssertMacro(*(sockdir) != '\0'), \
+		snprintf(path, sizeof(path), "%s/.s.PGSQL.%d", \
+				 (sockdir), (port)))
+
+/*
+ * The maximum workable length of a socket path is what will fit into
+ * struct sockaddr_un.  This is usually only 100 or so bytes :-(.
+ *
+ * For consistency, always pass a MAXPGPATH-sized buffer to UNIXSOCK_PATH(),
+ * then complain if the resulting string is >= UNIXSOCK_PATH_BUFLEN bytes.
+ * (Because the standard API for getaddrinfo doesn't allow it to complain in
+ * a useful way when the socket pathname is too long, we have to test for
+ * this explicitly, instead of just letting the subroutine return an error.)
+ */
+#define UNIXSOCK_PATH_BUFLEN sizeof(((struct sockaddr_un *) NULL)->sun_path)
+
+/*
+ * A host that looks either like an absolute path or starts with @ is
+ * interpreted as a Unix-domain socket address.
+ */
+static inline bool
+is_unixsock_path(const char *path)
+{
+	return is_absolute_path(path) || path[0] == '@';
+}
+
+/*
+ * These manipulate the frontend/backend protocol version number.
+ *
+ * The major number should be incremented for incompatible changes.  The minor
+ * number should be incremented for compatible changes (eg. additional
+ * functionality).
+ *
+ * If a backend supports version m.n of the protocol it must actually support
+ * versions m.[0..n].  Backend support for version m-1 can be dropped after a
+ * `reasonable' length of time.
+ *
+ * A frontend isn't required to support anything other than the current
+ * version.
+ */
+
+#define PG_PROTOCOL_MAJOR(v)	((v) >> 16)
+#define PG_PROTOCOL_MINOR(v)	((v) & 0x0000ffff)
+#define PG_PROTOCOL(m,n)	(((m) << 16) | (n))
+
+/*
+ * The earliest and latest frontend/backend protocol version supported.
+ * (Only protocol version 3 is currently supported)
+ */
+
+#define PG_PROTOCOL_EARLIEST	PG_PROTOCOL(3,0)
+#define PG_PROTOCOL_LATEST		PG_PROTOCOL(3,0)
+
+typedef uint32 ProtocolVersion; /* FE/BE protocol version number */
+
+typedef ProtocolVersion MsgType;
+
+
+/*
+ * Packet lengths are 4 bytes in network byte order.
+ *
+ * The initial length is omitted from the packet layouts appearing below.
+ */
+
+typedef uint32 PacketLen;
+
+extern bool Db_user_namespace;
+
+/*
+ * In protocol 3.0 and later, the startup packet length is not fixed, but
+ * we set an arbitrary limit on it anyway.  This is just to prevent simple
+ * denial-of-service attacks via sending enough data to run the server
+ * out of memory.
+ */
+#define MAX_STARTUP_PACKET_LENGTH 10000
+
+
+/* These are the authentication request codes sent by the backend. */
+
+#define AUTH_REQ_OK			0	/* User is authenticated  */
+#define AUTH_REQ_KRB4		1	/* Kerberos V4. Not supported any more. */
+#define AUTH_REQ_KRB5		2	/* Kerberos V5. Not supported any more. */
+#define AUTH_REQ_PASSWORD	3	/* Password */
+#define AUTH_REQ_CRYPT		4	/* crypt password. Not supported any more. */
+#define AUTH_REQ_MD5		5	/* md5 password */
+#define AUTH_REQ_SCM_CREDS	6	/* transfer SCM credentials */
+#define AUTH_REQ_GSS		7	/* GSSAPI without wrap() */
+#define AUTH_REQ_GSS_CONT	8	/* Continue GSS exchanges */
+#define AUTH_REQ_SSPI		9	/* SSPI negotiate without wrap() */
+#define AUTH_REQ_SASL	   10	/* Begin SASL authentication */
+#define AUTH_REQ_SASL_CONT 11	/* Continue SASL authentication */
+#define AUTH_REQ_SASL_FIN  12	/* Final SASL message */
+
+typedef uint32 AuthRequest;
+
+
+/*
+ * A client can also send a cancel-current-operation request to the postmaster.
+ * This is uglier than sending it directly to the client's backend, but it
+ * avoids depending on out-of-band communication facilities.
+ *
+ * The cancel request code must not match any protocol version number
+ * we're ever likely to use.  This random choice should do.
+ */
+#define CANCEL_REQUEST_CODE PG_PROTOCOL(1234,5678)
+
+typedef struct CancelRequestPacket
+{
+	/* Note that each field is stored in network byte order! */
+	MsgType		cancelRequestCode;	/* code to identify a cancel request */
+	uint32		backendPID;		/* PID of client's backend */
+	uint32		cancelAuthCode; /* secret key to authorize cancel */
+} CancelRequestPacket;
+
+
+/*
+ * A client can also start by sending a SSL or GSSAPI negotiation request to
+ * get a secure channel.
+ */
+#define NEGOTIATE_SSL_CODE PG_PROTOCOL(1234,5679)
+#define NEGOTIATE_GSS_CODE PG_PROTOCOL(1234,5680)
+
+#endif							/* PQCOMM_H */