1 files changed, 304 insertions, 0 deletions
diff --git a/src/backend/backup/basebackup_gzip.c b/src/backend/backup/basebackup_gzip.c
new file mode 100644
index 0000000..1ec4279
--- /dev/null
+++ b/src/backend/backup/basebackup_gzip.c
@@ -0,0 +1,304 @@
+/*-------------------------------------------------------------------------
+ *
+ * basebackup_gzip.c
+ *	  Basebackup sink implementing gzip compression.
+ *
+ * Portions Copyright (c) 2010-2022, PostgreSQL Global Development Group
+ *
+ * IDENTIFICATION
+ *	  src/backend/backup/basebackup_gzip.c
+ *
+ *-------------------------------------------------------------------------
+ */
+#include "postgres.h"
+
+#ifdef HAVE_LIBZ
+#include <zlib.h>
+#endif
+
+#include "backup/basebackup_sink.h"
+
+#ifdef HAVE_LIBZ
+typedef struct bbsink_gzip
+{
+	/* Common information for all types of sink. */
+	bbsink		base;
+
+	/* Compression level. */
+	int			compresslevel;
+
+	/* Compressed data stream. */
+	z_stream	zstream;
+
+	/* Number of bytes staged in output buffer. */
+	size_t		bytes_written;
+} bbsink_gzip;
+
+static void bbsink_gzip_begin_backup(bbsink *sink);
+static void bbsink_gzip_begin_archive(bbsink *sink, const char *archive_name);
+static void bbsink_gzip_archive_contents(bbsink *sink, size_t len);
+static void bbsink_gzip_manifest_contents(bbsink *sink, size_t len);
+static void bbsink_gzip_end_archive(bbsink *sink);
+static void *gzip_palloc(void *opaque, unsigned items, unsigned size);
+static void gzip_pfree(void *opaque, void *address);
+
+static const bbsink_ops bbsink_gzip_ops = {
+	.begin_backup = bbsink_gzip_begin_backup,
+	.begin_archive = bbsink_gzip_begin_archive,
+	.archive_contents = bbsink_gzip_archive_contents,
+	.end_archive = bbsink_gzip_end_archive,
+	.begin_manifest = bbsink_forward_begin_manifest,
+	.manifest_contents = bbsink_gzip_manifest_contents,
+	.end_manifest = bbsink_forward_end_manifest,
+	.end_backup = bbsink_forward_end_backup,
+	.cleanup = bbsink_forward_cleanup
+};
+#endif
+
+/*
+ * Create a new basebackup sink that performs gzip compression.
+ */
+bbsink *
+bbsink_gzip_new(bbsink *next, pg_compress_specification *compress)
+{
+#ifndef HAVE_LIBZ
+	ereport(ERROR,
+			(errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+			 errmsg("gzip compression is not supported by this build")));
+	return NULL;				/* keep compiler quiet */
+#else
+	bbsink_gzip *sink;
+	int			compresslevel;
+
+	Assert(next != NULL);
+
+	compresslevel = compress->level;
+	Assert((compresslevel >= 1 && compresslevel <= 9) ||
+		   compresslevel == Z_DEFAULT_COMPRESSION);
+
+	sink = palloc0(sizeof(bbsink_gzip));
+	*((const bbsink_ops **) &sink->base.bbs_ops) = &bbsink_gzip_ops;
+	sink->base.bbs_next = next;
+	sink->compresslevel = compresslevel;
+
+	return &sink->base;
+#endif
+}
+
+#ifdef HAVE_LIBZ
+
+/*
+ * Begin backup.
+ */
+static void
+bbsink_gzip_begin_backup(bbsink *sink)
+{
+	/*
+	 * We need our own buffer, because we're going to pass different data to
+	 * the next sink than what gets passed to us.
+	 */
+	sink->bbs_buffer = palloc(sink->bbs_buffer_length);
+
+	/*
+	 * Since deflate() doesn't require the output buffer to be of any
+	 * particular size, we can just make it the same size as the input buffer.
+	 */
+	bbsink_begin_backup(sink->bbs_next, sink->bbs_state,
+						sink->bbs_buffer_length);
+}
+
+/*
+ * Prepare to compress the next archive.
+ */
+static void
+bbsink_gzip_begin_archive(bbsink *sink, const char *archive_name)
+{
+	bbsink_gzip *mysink = (bbsink_gzip *) sink;
+	char	   *gz_archive_name;
+	z_stream   *zs = &mysink->zstream;
+
+	/* Initialize compressor object. */
+	memset(zs, 0, sizeof(z_stream));
+	zs->zalloc = gzip_palloc;
+	zs->zfree = gzip_pfree;
+	zs->next_out = (uint8 *) sink->bbs_next->bbs_buffer;
+	zs->avail_out = sink->bbs_next->bbs_buffer_length;
+
+	/*
+	 * We need to use deflateInit2() rather than deflateInit() here so that we
+	 * can request a gzip header rather than a zlib header. Otherwise, we want
+	 * to supply the same values that would have been used by default if we
+	 * had just called deflateInit().
+	 *
+	 * Per the documentation for deflateInit2, the third argument must be
+	 * Z_DEFLATED; the fourth argument is the number of "window bits", by
+	 * default 15, but adding 16 gets you a gzip header rather than a zlib
+	 * header; the fifth argument controls memory usage, and 8 is the default;
+	 * and likewise Z_DEFAULT_STRATEGY is the default for the sixth argument.
+	 */
+	if (deflateInit2(zs, mysink->compresslevel, Z_DEFLATED, 15 + 16, 8,
+					 Z_DEFAULT_STRATEGY) != Z_OK)
+		ereport(ERROR,
+				errcode(ERRCODE_INTERNAL_ERROR),
+				errmsg("could not initialize compression library"));
+
+	/*
+	 * Add ".gz" to the archive name. Note that the pg_basebackup -z produces
+	 * archives named ".tar.gz" rather than ".tgz", so we match that here.
+	 */
+	gz_archive_name = psprintf("%s.gz", archive_name);
+	Assert(sink->bbs_next != NULL);
+	bbsink_begin_archive(sink->bbs_next, gz_archive_name);
+	pfree(gz_archive_name);
+}
+
+/*
+ * Compress the input data to the output buffer until we run out of input
+ * data. Each time the output buffer fills up, invoke the archive_contents()
+ * method for then next sink.
+ *
+ * Note that since we're compressing the input, it may very commonly happen
+ * that we consume all the input data without filling the output buffer. In
+ * that case, the compressed representation of the current input data won't
+ * actually be sent to the next bbsink until a later call to this function,
+ * or perhaps even not until bbsink_gzip_end_archive() is invoked.
+ */
+static void
+bbsink_gzip_archive_contents(bbsink *sink, size_t len)
+{
+	bbsink_gzip *mysink = (bbsink_gzip *) sink;
+	z_stream   *zs = &mysink->zstream;
+
+	/* Compress data from input buffer. */
+	zs->next_in = (uint8 *) mysink->base.bbs_buffer;
+	zs->avail_in = len;
+
+	while (zs->avail_in > 0)
+	{
+		int			res;
+
+		/* Write output data into unused portion of output buffer. */
+		Assert(mysink->bytes_written < mysink->base.bbs_next->bbs_buffer_length);
+		zs->next_out = (uint8 *)
+			mysink->base.bbs_next->bbs_buffer + mysink->bytes_written;
+		zs->avail_out =
+			mysink->base.bbs_next->bbs_buffer_length - mysink->bytes_written;
+
+		/*
+		 * Try to compress. Note that this will update zs->next_in and
+		 * zs->avail_in according to how much input data was consumed, and
+		 * zs->next_out and zs->avail_out according to how many output bytes
+		 * were produced.
+		 *
+		 * According to the zlib documentation, Z_STREAM_ERROR should only
+		 * occur if we've made a programming error, or if say there's been a
+		 * memory clobber; we use elog() rather than Assert() here out of an
+		 * abundance of caution.
+		 */
+		res = deflate(zs, Z_NO_FLUSH);
+		if (res == Z_STREAM_ERROR)
+			elog(ERROR, "could not compress data: %s", zs->msg);
+
+		/* Update our notion of how many bytes we've written. */
+		mysink->bytes_written =
+			mysink->base.bbs_next->bbs_buffer_length - zs->avail_out;
+
+		/*
+		 * If the output buffer is full, it's time for the next sink to
+		 * process the contents.
+		 */
+		if (mysink->bytes_written >= mysink->base.bbs_next->bbs_buffer_length)
+		{
+			bbsink_archive_contents(sink->bbs_next, mysink->bytes_written);
+			mysink->bytes_written = 0;
+		}
+	}
+}
+
+/*
+ * There might be some data inside zlib's internal buffers; we need to get
+ * that flushed out and forwarded to the successor sink as archive content.
+ *
+ * Then we can end processing for this archive.
+ */
+static void
+bbsink_gzip_end_archive(bbsink *sink)
+{
+	bbsink_gzip *mysink = (bbsink_gzip *) sink;
+	z_stream   *zs = &mysink->zstream;
+
+	/* There is no more data available. */
+	zs->next_in = (uint8 *) mysink->base.bbs_buffer;
+	zs->avail_in = 0;
+
+	while (1)
+	{
+		int			res;
+
+		/* Write output data into unused portion of output buffer. */
+		Assert(mysink->bytes_written < mysink->base.bbs_next->bbs_buffer_length);
+		zs->next_out = (uint8 *)
+			mysink->base.bbs_next->bbs_buffer + mysink->bytes_written;
+		zs->avail_out =
+			mysink->base.bbs_next->bbs_buffer_length - mysink->bytes_written;
+
+		/*
+		 * As bbsink_gzip_archive_contents, but pass Z_FINISH since there is
+		 * no more input.
+		 */
+		res = deflate(zs, Z_FINISH);
+		if (res == Z_STREAM_ERROR)
+			elog(ERROR, "could not compress data: %s", zs->msg);
+
+		/* Update our notion of how many bytes we've written. */
+		mysink->bytes_written =
+			mysink->base.bbs_next->bbs_buffer_length - zs->avail_out;
+
+		/*
+		 * Apparently we had no data in the output buffer and deflate() was
+		 * not able to add any. We must be done.
+		 */
+		if (mysink->bytes_written == 0)
+			break;
+
+		/* Send whatever accumulated output bytes we have. */
+		bbsink_archive_contents(sink->bbs_next, mysink->bytes_written);
+		mysink->bytes_written = 0;
+	}
+
+	/* Must also pass on the information that this archive has ended. */
+	bbsink_forward_end_archive(sink);
+}
+
+/*
+ * Manifest contents are not compressed, but we do need to copy them into
+ * the successor sink's buffer, because we have our own.
+ */
+static void
+bbsink_gzip_manifest_contents(bbsink *sink, size_t len)
+{
+	memcpy(sink->bbs_next->bbs_buffer, sink->bbs_buffer, len);
+	bbsink_manifest_contents(sink->bbs_next, len);
+}
+
+/*
+ * Wrapper function to adjust the signature of palloc to match what libz
+ * expects.
+ */
+static void *
+gzip_palloc(void *opaque, unsigned items, unsigned size)
+{
+	return palloc(items * size);
+}
+
+/*
+ * Wrapper function to adjust the signature of pfree to match what libz
+ * expects.
+ */
+static void
+gzip_pfree(void *opaque, void *address)
+{
+	pfree(address);
+}
+
+#endif