path: root/doc/src/sgml/arch-dev.sgml

<!-- doc/src/sgml/arch-dev.sgml -->

 <chapter id="overview">
  <title>Overview of PostgreSQL Internals</title>

  <note>
   <title>Author</title>
   <para>
    This chapter originated as part of
    <xref linkend="sim98"/> Stefan Simkovics'
    Master's Thesis prepared at Vienna University of Technology under the direction
    of O.Univ.Prof.Dr. Georg Gottlob and Univ.Ass. Mag. Katrin Seyr.
   </para>
  </note>

  <para>
   This chapter gives an overview of the internal structure of the
   backend of <productname>PostgreSQL</productname>.  After having
   read the following sections you should have an idea of how a query
   is processed.  This chapter is intended to help the reader
   understand the general sequence of operations that occur within the
   backend from the point at which a query is received, to the point
   at which the results are returned to the client.
  </para>

  <sect1 id="query-path">
   <title>The Path of a Query</title>

   <para>
    Here we give a short overview of the stages a query has to pass
    to obtain a result.
   </para>

   <procedure>
    <step>
     <para>
      A connection from an application program to the <productname>PostgreSQL</productname>
      server has to be established. The application program transmits a
      query to the server and waits to receive the results sent back by the
      server.
     </para>
    </step>

    <step>
     <para>
      The <firstterm>parser stage</firstterm> checks the query
      transmitted by the application
      program for correct syntax and creates
      a <firstterm>query tree</firstterm>.
     </para>
    </step>

    <step>
     <para>
      The <firstterm>rewrite system</firstterm> takes
      the query tree created by the parser stage and looks for
      any <firstterm>rules</firstterm> (stored in the
      <firstterm>system catalogs</firstterm>) to apply to
      the query tree.  It performs the
      transformations given in the <firstterm>rule bodies</firstterm>.
     </para>

     <para>
      One application of the rewrite system is in the realization of
      <firstterm>views</firstterm>.
      Whenever a query against a view
      (i.e., a <firstterm>virtual table</firstterm>) is made,
      the rewrite system rewrites the user's query to
      a query that accesses the <firstterm>base tables</firstterm> given in
      the <firstterm>view definition</firstterm> instead.
     </para>
    </step>

    <step>
     <para>
      The <firstterm>planner/optimizer</firstterm> takes
      the (rewritten) query tree and creates a
      <firstterm>query plan</firstterm> that will be the input to the
      <firstterm>executor</firstterm>.
     </para>

     <para>
      It does so by first creating all possible <firstterm>paths</firstterm>
      leading to the same result. For example if there is an index on a
      relation to be scanned, there are two paths for the
      scan. One possibility is a simple sequential scan and the other
      possibility is to use the index. Next the cost for the execution of
      each path is estimated and the cheapest path is chosen.  The cheapest
      path is expanded into a complete plan that the executor can use.
     </para>
    </step>

    <step>
     <para>
      The executor recursively steps through
      the <firstterm>plan tree</firstterm> and
      retrieves rows in the way represented by the plan.
      The executor makes use of the
      <firstterm>storage system</firstterm> while scanning
      relations, performs <firstterm>sorts</firstterm> and <firstterm>joins</firstterm>,
      evaluates <firstterm>qualifications</firstterm> and finally hands back the rows derived.
     </para>
    </step>
   </procedure>

   <para>
    In the following sections we will cover each of the above listed items
    in more detail to give a better understanding of <productname>PostgreSQL</productname>'s internal
    control and data structures.
   </para>
  </sect1>

  <sect1 id="connect-estab">
   <title>How Connections Are Established</title>

   <para>
    <productname>PostgreSQL</productname> implements a
    <quote>process per user</quote> client/server model.
    In this model, every
    <glossterm linkend="glossary-client">client process</glossterm>
    connects to exactly one
    <glossterm linkend="glossary-backend">backend process</glossterm>.
    As we do not know ahead of time how many connections will be made,
    we have to use a <quote>supervisor process</quote> that spawns a new
    backend process every time a connection is requested. This supervisor
    process is called
    <glossterm linkend="glossary-postmaster">postmaster</glossterm>
    and listens at a specified TCP/IP port for incoming connections.
    Whenever it detects a request for a connection, it spawns a new
    backend process.  Those backend processes communicate with each
    other and with other processes of the
    <glossterm linkend="glossary-instance">instance</glossterm>
    using <firstterm>semaphores</firstterm> and
    <glossterm linkend="glossary-shared-memory">shared memory</glossterm>
    to ensure data integrity throughout concurrent data access.
   </para>

   <para>
    The client process can be any program that understands the
    <productname>PostgreSQL</productname> protocol described in
    <xref linkend="protocol"/>.  Many clients are based on the
    C-language library <application>libpq</application>, but several independent
    implementations of the protocol exist, such as the Java
    <application>JDBC</application> driver.
   </para>

   <para>
    Once a connection is established, the client process can send a query
    to the backend process it's connected to. The query is transmitted using
    plain text, i.e., there is no parsing done in the client. The backend
    process parses the query, creates an <firstterm>execution plan</firstterm>,
    executes the plan, and returns the retrieved rows to the client
    by transmitting them over the established connection.
   </para>
  </sect1>

  <sect1 id="parser-stage">
   <title>The Parser Stage</title>

   <para>
    The <firstterm>parser stage</firstterm> consists of two parts:

    <itemizedlist>
     <listitem>
      <para>
       The <firstterm>parser</firstterm> defined in
       <filename>gram.y</filename> and <filename>scan.l</filename> is
       built using the Unix tools <application>bison</application>
       and <application>flex</application>.
      </para>
     </listitem>
     <listitem>
      <para>
       The <firstterm>transformation process</firstterm> does
       modifications and augmentations to the data structures returned by the parser.
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <sect2>
    <title>Parser</title>

    <para>
     The parser has to check the query string (which arrives as plain
     text) for valid syntax. If the syntax is correct a
     <firstterm>parse tree</firstterm> is built up and handed back;
     otherwise an error is returned. The parser and lexer are
     implemented using the well-known Unix tools <application>bison</application>
     and <application>flex</application>.
    </para>

    <para>
     The <firstterm>lexer</firstterm> is defined in the file
     <filename>scan.l</filename> and is responsible
     for recognizing <firstterm>identifiers</firstterm>,
     the <firstterm>SQL key words</firstterm> etc. For
     every key word or identifier that is found, a <firstterm>token</firstterm>
     is generated and handed to the parser.
    </para>

    <para>
     The parser is defined in the file <filename>gram.y</filename> and
     consists of a set of <firstterm>grammar rules</firstterm> and
     <firstterm>actions</firstterm> that are executed whenever a rule
     is fired. The code of the actions (which is actually C code) is
     used to build up the parse tree.
    </para>

    <para>
     The file <filename>scan.l</filename> is transformed to the C
     source file <filename>scan.c</filename> using the program
     <application>flex</application> and <filename>gram.y</filename> is
     transformed to <filename>gram.c</filename> using
     <application>bison</application>.  After these transformations
     have taken place a normal C compiler can be used to create the
     parser. Never make any changes to the generated C files as they
     will be overwritten the next time <application>flex</application>
     or <application>bison</application> is called.

     <note>
      <para>
       The mentioned transformations and compilations are normally done
       automatically using the <firstterm>makefiles</firstterm>
       shipped with the <productname>PostgreSQL</productname>
       source distribution.
      </para>
     </note>
    </para>

    <para>
     A detailed description of <application>bison</application> or
     the grammar rules given in <filename>gram.y</filename> would be
     beyond the scope of this manual. There are many books and
     documents dealing with <application>flex</application> and
     <application>bison</application>. You should be familiar with
     <application>bison</application> before you start to study the
     grammar given in <filename>gram.y</filename> otherwise you won't
     understand what happens there.
    </para>

   </sect2>

   <sect2>
     <title>Transformation Process</title>

    <para>
     The parser stage creates a parse tree using only fixed rules about
     the syntactic structure of SQL.  It does not make any lookups in the
     system catalogs, so there is no possibility to understand the detailed
     semantics of the requested operations.  After the parser completes,
     the <firstterm>transformation process</firstterm> takes the tree handed
     back by the parser as input and does the semantic interpretation needed
     to understand which tables, functions, and operators are referenced by
     the query.  The data structure that is built to represent this
     information is called the <firstterm>query tree</firstterm>.
    </para>

    <para>
     The reason for separating raw parsing from semantic analysis is that
     system catalog lookups can only be done within a transaction, and we
     do not wish to start a transaction immediately upon receiving a query
     string.  The raw parsing stage is sufficient to identify the transaction
     control commands (<command>BEGIN</command>, <command>ROLLBACK</command>, etc.), and
     these can then be correctly executed without any further analysis.
     Once we know that we are dealing with an actual query (such as
     <command>SELECT</command> or <command>UPDATE</command>), it is okay to
     start a transaction if we're not already in one.  Only then can the
     transformation process be invoked.
    </para>

    <para>
     The query tree created by the transformation process is structurally
     similar to the raw parse tree in most places, but it has many differences
     in detail.  For example, a <structname>FuncCall</structname> node in the
     parse tree represents something that looks syntactically like a function
     call.  This might be transformed to either a <structname>FuncExpr</structname>
     or <structname>Aggref</structname> node depending on whether the referenced
     name turns out to be an ordinary function or an aggregate function.
     Also, information about the actual data types of columns and expression
     results is added to the query tree.
    </para>
   </sect2>
  </sect1>

  <sect1 id="rule-system">
   <title>The <productname>PostgreSQL</productname> Rule System</title>

   <para>
    <productname>PostgreSQL</productname> supports a powerful
    <firstterm>rule system</firstterm> for the specification
    of <firstterm>views</firstterm> and ambiguous <firstterm>view updates</firstterm>.
    Originally the <productname>PostgreSQL</productname>
    rule system consisted of two implementations:

    <itemizedlist>
     <listitem>
      <para>
       The first one worked using <firstterm>row level</firstterm> processing and was
       implemented deep in the <firstterm>executor</firstterm>. The rule system was
       called whenever an individual row had been accessed. This
       implementation was removed in 1995 when the last official release
       of the <productname>Berkeley Postgres</productname> project was
       transformed into <productname>Postgres95</productname>.
      </para>
     </listitem>

     <listitem>
      <para>
       The second implementation of the rule system is a technique
       called <firstterm>query rewriting</firstterm>.
       The <firstterm>rewrite system</firstterm> is a module
       that exists between the <firstterm>parser stage</firstterm> and the
       <firstterm>planner/optimizer</firstterm>. This technique is still implemented.
      </para>
     </listitem>
    </itemizedlist>
   </para>

   <para>
    The query rewriter is discussed in some detail in
    <xref linkend="rules"/>, so there is no need to cover it here.
    We will only point out that both the input and the output of the
    rewriter are query trees, that is, there is no change in the
    representation or level of semantic detail in the trees.  Rewriting
    can be thought of as a form of macro expansion.
   </para>

  </sect1>

  <sect1 id="planner-optimizer">
   <title>Planner/Optimizer</title>

   <para>
    The task of the <firstterm>planner/optimizer</firstterm> is to
    create an optimal execution plan. A given SQL query (and hence, a
    query tree) can be actually executed in a wide variety of
    different ways, each of which will produce the same set of
    results.  If it is computationally feasible, the query optimizer
    will examine each of these possible execution plans, ultimately
    selecting the execution plan that is expected to run the fastest.
   </para>

   <note>
    <para>
     In some situations, examining each possible way in which a query
     can be executed would take an excessive amount of time and memory.
     In particular, this occurs when executing queries
     involving large numbers of join operations. In order to determine
     a reasonable (not necessarily optimal) query plan in a reasonable amount
     of time, <productname>PostgreSQL</productname> uses a <firstterm>Genetic
     Query Optimizer</firstterm> (see <xref linkend="geqo"/>) when the number of joins
     exceeds a threshold (see <xref linkend="guc-geqo-threshold"/>).
    </para>
   </note>

   <para>
    The planner's search procedure actually works with data structures
    called <firstterm>paths</firstterm>, which are simply cut-down representations of
    plans containing only as much information as the planner needs to make
    its decisions. After the cheapest path is determined, a full-fledged
    <firstterm>plan tree</firstterm> is built to pass to the executor.  This represents
    the desired execution plan in sufficient detail for the executor to run it.
    In the rest of this section we'll ignore the distinction between paths
    and plans.
   </para>

   <sect2>
    <title>Generating Possible Plans</title>

    <para>
     The planner/optimizer starts by generating plans for scanning each
     individual relation (table) used in the query.  The possible plans
     are determined by the available indexes on each relation.
     There is always the possibility of performing a
     sequential scan on a relation, so a sequential scan plan is always
     created. Assume an index is defined on a
     relation (for example a B-tree index) and a query contains the
     restriction
     <literal>relation.attribute OPR constant</literal>. If
     <literal>relation.attribute</literal> happens to match the key of the B-tree
     index and <literal>OPR</literal> is one of the operators listed in
     the index's <firstterm>operator class</firstterm>, another plan is created using
     the B-tree index to scan the relation. If there are further indexes
     present and the restrictions in the query happen to match a key of an
     index, further plans will be considered.  Index scan plans are also
     generated for indexes that have a sort ordering that can match the
     query's <literal>ORDER BY</literal> clause (if any), or a sort ordering that
     might be useful for merge joining (see below).
    </para>

    <para>
     If the query requires joining two or more relations,
     plans for joining relations are considered
     after all feasible plans have been found for scanning single relations.
     The three available join strategies are:

     <itemizedlist>
      <listitem>
       <para>
        <firstterm>nested loop join</firstterm>: The right relation is scanned
        once for every row found in the left relation. This strategy
        is easy to implement but can be very time consuming.  (However,
        if the right relation can be scanned with an index scan, this can
        be a good strategy.  It is possible to use values from the current
        row of the left relation as keys for the index scan of the right.)
       </para>
      </listitem>

      <listitem>
       <para>
        <firstterm>merge join</firstterm>: Each relation is sorted on the join
        attributes before the join starts. Then the two relations are
        scanned in parallel, and matching rows are combined to form
        join rows. This kind of join is
        attractive because each relation has to be scanned only once.
        The required sorting might be achieved either by an explicit sort
        step, or by scanning the relation in the proper order using an
        index on the join key.
       </para>
      </listitem>

      <listitem>
       <para>
        <firstterm>hash join</firstterm>: the right relation is first scanned
        and loaded into a hash table, using its join attributes as hash keys.
        Next the left relation is scanned and the
        appropriate values of every row found are used as hash keys to
        locate the matching rows in the table.
       </para>
      </listitem>
     </itemizedlist>
    </para>

    <para>
     When the query involves more than two relations, the final result
     must be built up by a tree of join steps, each with two inputs.
     The planner examines different possible join sequences to find the
     cheapest one.
    </para>

    <para>
     If the query uses fewer than <xref linkend="guc-geqo-threshold"/>
     relations, a near-exhaustive search is conducted to find the best
     join sequence.  The planner preferentially considers joins between any
     two relations for which there exists a corresponding join clause in the
     <literal>WHERE</literal> qualification (i.e., for
     which a restriction like <literal>where rel1.attr1=rel2.attr2</literal>
     exists). Join pairs with no join clause are considered only when there
     is no other choice, that is, a particular relation has no available
     join clauses to any other relation. All possible plans are generated for
     every join pair considered by the planner, and the one that is
     (estimated to be) the cheapest is chosen.
    </para>

    <para>
     When <varname>geqo_threshold</varname> is exceeded, the join
     sequences considered are determined by heuristics, as described
     in <xref linkend="geqo"/>.  Otherwise the process is the same.
    </para>

    <para>
     The finished plan tree consists of sequential or index scans of
     the base relations, plus nested-loop, merge, or hash join nodes as
     needed, plus any auxiliary steps needed, such as sort nodes or
     aggregate-function calculation nodes.  Most of these plan node
     types have the additional ability to do <firstterm>selection</firstterm>
     (discarding rows that do not meet a specified Boolean condition)
     and <firstterm>projection</firstterm> (computation of a derived column set
     based on given column values, that is, evaluation of scalar
     expressions where needed).  One of the responsibilities of the
     planner is to attach selection conditions from the
     <literal>WHERE</literal> clause and computation of required
     output expressions to the most appropriate nodes of the plan
     tree.
    </para>
   </sect2>
  </sect1>

  <sect1 id="executor">
   <title>Executor</title>

   <para>
    The <firstterm>executor</firstterm> takes the plan created by the
    planner/optimizer and recursively processes it to extract the required set
    of rows.  This is essentially a demand-pull pipeline mechanism.
    Each time a plan node is called, it must deliver one more row, or
    report that it is done delivering rows.
   </para>

   <para>
    To provide a concrete example, assume that the top
    node is a <literal>MergeJoin</literal> node.
    Before any merge can be done two rows have to be fetched (one from
    each subplan). So the executor recursively calls itself to
    process the subplans (it starts with the subplan attached to
    <literal>lefttree</literal>). The new top node (the top node of the left
    subplan) is, let's say, a
    <literal>Sort</literal> node and again recursion is needed to obtain
    an input row.  The child node of the <literal>Sort</literal> might
    be a <literal>SeqScan</literal> node, representing actual reading of a table.
    Execution of this node causes the executor to fetch a row from the
    table and return it up to the calling node.  The <literal>Sort</literal>
    node will repeatedly call its child to obtain all the rows to be sorted.
    When the input is exhausted (as indicated by the child node returning
    a NULL instead of a row), the <literal>Sort</literal> code performs
    the sort, and finally is able to return its first output row, namely
    the first one in sorted order.  It keeps the remaining rows stored so
    that it can deliver them in sorted order in response to later demands.
   </para>

   <para>
    The <literal>MergeJoin</literal> node similarly demands the first row
    from its right subplan.  Then it compares the two rows to see if they
    can be joined; if so, it returns a join row to its caller.  On the next
    call, or immediately if it cannot join the current pair of inputs,
    it advances to the next row of one table
    or the other (depending on how the comparison came out), and again
    checks for a match.  Eventually, one subplan or the other is exhausted,
    and the <literal>MergeJoin</literal> node returns NULL to indicate that
    no more join rows can be formed.
   </para>

   <para>
    Complex queries can involve many levels of plan nodes, but the general
    approach is the same: each node computes and returns its next output
    row each time it is called.  Each node is also responsible for applying
    any selection or projection expressions that were assigned to it by
    the planner.
   </para>

   <para>
    The executor mechanism is used to evaluate all five basic SQL query
    types: <command>SELECT</command>, <command>INSERT</command>,
    <command>UPDATE</command>, <command>DELETE</command>, and
    <command>MERGE</command>.
    For <command>SELECT</command>, the top-level executor code
    only needs to send each row returned by the query plan tree
    off to the client.  <command>INSERT ... SELECT</command>,
    <command>UPDATE</command>, <command>DELETE</command>, and
    <command>MERGE</command>
    are effectively <command>SELECT</command>s under a special
    top-level plan node called <literal>ModifyTable</literal>.
   </para>

   <para>
    <command>INSERT ... SELECT</command> feeds the rows up
    to <literal>ModifyTable</literal> for insertion.  For
    <command>UPDATE</command>, the planner arranges that each
    computed row includes all the updated column values, plus the
    <firstterm>TID</firstterm> (tuple ID, or row ID) of the original
    target row; this data is fed up to the <literal>ModifyTable</literal>
    node, which uses the information to create a new updated row and
    mark the old row deleted.  For <command>DELETE</command>, the only
    column that is actually returned by the plan is the TID, and the
    <literal>ModifyTable</literal> node simply uses the TID to visit each
    target row and mark it deleted.  For <command>MERGE</command>, the
    planner joins the source and target relations, and includes all
    column values required by any of the <literal>WHEN</literal> clauses,
    plus the TID of the target row; this data is fed up to the
    <literal>ModifyTable</literal> node, which uses the information to
    work out which <literal>WHEN</literal> clause to execute, and then
    inserts, updates or deletes the target row, as required.
   </para>

   <para>
    A simple <command>INSERT ... VALUES</command> command creates a
    trivial plan tree consisting of a single <literal>Result</literal>
    node, which computes just one result row, feeding that up
    to <literal>ModifyTable</literal> to perform the insertion.
   </para>

  </sect1>

 </chapter>