Adding upstream version 5:7.0.15.upstream/5%7.0.15upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 294 insertions, 0 deletions

diff --git a/tests/integration/failover.tcl b/tests/integration/failover.tcl
new file mode 100644
index 0000000..2cd9448
--- /dev/null
+++ b/tests/integration/failover.tcl
@@ -0,0 +1,294 @@
+start_server {tags {"failover external:skip"}} {
+start_server {} {
+start_server {} {
+    set node_0 [srv 0 client]
+    set node_0_host [srv 0 host]
+    set node_0_port [srv 0 port]
+    set node_0_pid [srv 0 pid]
+
+    set node_1 [srv -1 client]
+    set node_1_host [srv -1 host]
+    set node_1_port [srv -1 port]
+    set node_1_pid [srv -1 pid]
+
+    set node_2 [srv -2 client]
+    set node_2_host [srv -2 host]
+    set node_2_port [srv -2 port]
+    set node_2_pid [srv -2 pid]
+
+    proc assert_digests_match {n1 n2 n3} {
+        assert_equal [$n1 debug digest] [$n2 debug digest]
+        assert_equal [$n2 debug digest] [$n3 debug digest]
+    }
+
+    test {failover command fails without connected replica} {
+        catch { $node_0 failover to $node_1_host $node_1_port } err
+        if {! [string match "ERR*" $err]} {
+            fail "failover command succeeded when replica not connected"
+        }
+    }
+
+    test {setup replication for following tests} {
+        $node_1 replicaof $node_0_host $node_0_port
+        $node_2 replicaof $node_0_host $node_0_port
+        wait_for_sync $node_1
+        wait_for_sync $node_2
+    }
+
+    test {failover command fails with invalid host} {
+        catch { $node_0 failover to invalidhost $node_1_port } err
+        assert_match "ERR*" $err
+    }
+
+    test {failover command fails with invalid port} {
+        catch { $node_0 failover to $node_1_host invalidport } err
+        assert_match "ERR*" $err
+    }
+
+    test {failover command fails with just force and timeout} {
+        catch { $node_0 FAILOVER FORCE TIMEOUT 100} err
+        assert_match "ERR*" $err
+    }
+
+    test {failover command fails when sent to a replica} {
+        catch { $node_1 failover to $node_1_host $node_1_port } err
+        assert_match "ERR*" $err
+    }
+
+    test {failover command fails with force without timeout} {
+        catch { $node_0 failover to $node_1_host $node_1_port FORCE } err
+        assert_match "ERR*" $err
+    }
+
+    test {failover command to specific replica works} {
+        set initial_psyncs [s -1 sync_partial_ok]
+        set initial_syncs [s -1 sync_full]
+
+        # Generate a delta between primary and replica
+        set load_handler [start_write_load $node_0_host $node_0_port 5]
+        exec kill -SIGSTOP [srv -1 pid]
+        wait_for_condition 50 100 {
+            [s 0 total_commands_processed] > 100
+        } else {
+            fail "Node 0 did not accept writes"
+        }
+        exec kill -SIGCONT [srv -1 pid]
+
+        # Execute the failover
+        $node_0 failover to $node_1_host $node_1_port
+
+        # Wait for failover to end
+        wait_for_condition 50 100 {
+            [s 0 master_failover_state] == "no-failover"
+        } else {
+            fail "Failover from node 0 to node 1 did not finish"
+        }
+
+        # stop the write load and make sure no more commands processed
+        stop_write_load $load_handler
+        wait_load_handlers_disconnected
+
+        $node_2 replicaof $node_1_host $node_1_port
+        wait_for_sync $node_0
+        wait_for_sync $node_2
+
+        assert_match *slave* [$node_0 role]
+        assert_match *master* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        # We should accept psyncs from both nodes
+        assert_equal [expr [s -1 sync_partial_ok] - $initial_psyncs] 2
+        assert_equal [expr [s -1 sync_full] - $initial_psyncs] 0
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+
+    test {failover command to any replica works} {
+        set initial_psyncs [s -2 sync_partial_ok]
+        set initial_syncs [s -2 sync_full]
+
+        wait_for_ofs_sync $node_1 $node_2
+        # We stop node 0 to and make sure node 2 is selected
+        exec kill -SIGSTOP $node_0_pid
+        $node_1 set CASE 1
+        $node_1 FAILOVER
+
+        # Wait for failover to end
+        wait_for_condition 50 100 {
+            [s -1 master_failover_state] == "no-failover"
+        } else {
+            fail "Failover from node 1 to node 2 did not finish"
+        }
+        exec kill -SIGCONT $node_0_pid
+        $node_0 replicaof $node_2_host $node_2_port
+
+        wait_for_sync $node_0
+        wait_for_sync $node_1
+
+        assert_match *slave* [$node_0 role]
+        assert_match *slave* [$node_1 role]
+        assert_match *master* [$node_2 role]
+
+        # We should accept Psyncs from both nodes
+        assert_equal [expr [s -2 sync_partial_ok] - $initial_psyncs] 2
+        assert_equal [expr [s -1 sync_full] - $initial_psyncs] 0
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+
+    test {failover to a replica with force works} {
+        set initial_psyncs [s 0 sync_partial_ok]
+        set initial_syncs [s 0 sync_full]
+
+        exec kill -SIGSTOP $node_0_pid
+        # node 0 will never acknowledge this write
+        $node_2 set case 2
+        $node_2 failover to $node_0_host $node_0_port TIMEOUT 100 FORCE
+
+        # Wait for node 0 to give up on sync attempt and start failover
+        wait_for_condition 50 100 {
+            [s -2 master_failover_state] == "failover-in-progress"
+        } else {
+            fail "Failover from node 2 to node 0 did not timeout"
+        }
+
+        # Quick check that everyone is a replica, we never want a 
+        # state where there are two masters.
+        assert_match *slave* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        exec kill -SIGCONT $node_0_pid
+
+        # Wait for failover to end
+        wait_for_condition 50 100 {
+            [s -2 master_failover_state] == "no-failover"
+        } else {
+            fail "Failover from node 2 to node 0 did not finish"
+        }
+        $node_1 replicaof $node_0_host $node_0_port
+
+        wait_for_sync $node_1
+        wait_for_sync $node_2
+
+        assert_match *master* [$node_0 role]
+        assert_match *slave* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        assert_equal [count_log_message -2 "time out exceeded, failing over."] 1
+
+        # We should accept both psyncs, although this is the condition we might not
+        # since we didn't catch up.
+        assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 2
+        assert_equal [expr [s 0 sync_full] - $initial_syncs] 0
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+
+    test {failover with timeout aborts if replica never catches up} {
+        set initial_psyncs [s 0 sync_partial_ok]
+        set initial_syncs [s 0 sync_full]
+
+        # Stop replica so it never catches up
+        exec kill -SIGSTOP [srv -1 pid]
+        $node_0 SET CASE 1
+        
+        $node_0 failover to [srv -1 host] [srv -1 port] TIMEOUT 500
+        # Wait for failover to end
+        wait_for_condition 50 20 {
+            [s 0 master_failover_state] == "no-failover"
+        } else {
+            fail "Failover from node_0 to replica did not finish"
+        }
+
+        exec kill -SIGCONT [srv -1 pid]
+
+        # We need to make sure the nodes actually sync back up
+        wait_for_ofs_sync $node_0 $node_1
+        wait_for_ofs_sync $node_0 $node_2
+
+        assert_match *master* [$node_0 role]
+        assert_match *slave* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        # Since we never caught up, there should be no syncs
+        assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 0
+        assert_equal [expr [s 0 sync_full] - $initial_syncs] 0
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+
+    test {failovers can be aborted} {
+        set initial_psyncs [s 0 sync_partial_ok]
+        set initial_syncs [s 0 sync_full]
+    
+        # Stop replica so it never catches up
+        exec kill -SIGSTOP [srv -1 pid]
+        $node_0 SET CASE 2
+        
+        $node_0 failover to [srv -1 host] [srv -1 port] TIMEOUT 60000
+        assert_match [s 0 master_failover_state] "waiting-for-sync"
+
+        # Sanity check that read commands are still accepted
+        $node_0 GET CASE
+
+        $node_0 failover abort
+        assert_match [s 0 master_failover_state] "no-failover"
+
+        exec kill -SIGCONT [srv -1 pid]
+
+        # Just make sure everything is still synced
+        wait_for_ofs_sync $node_0 $node_1
+        wait_for_ofs_sync $node_0 $node_2
+
+        assert_match *master* [$node_0 role]
+        assert_match *slave* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        # Since we never caught up, there should be no syncs
+        assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 0
+        assert_equal [expr [s 0 sync_full] - $initial_syncs] 0
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+
+    test {failover aborts if target rejects sync request} {
+        set initial_psyncs [s 0 sync_partial_ok]
+        set initial_syncs [s 0 sync_full]
+
+        # We block psync, so the failover will fail
+        $node_1 acl setuser default -psync
+
+        # We pause the target long enough to send a write command
+        # during the pause. This write will not be interrupted.
+        exec kill -SIGSTOP [srv -1 pid]
+        set rd [redis_deferring_client]
+        $rd SET FOO BAR
+        $node_0 failover to $node_1_host $node_1_port
+        exec kill -SIGCONT [srv -1 pid]
+
+        # Wait for failover to end
+        wait_for_condition 50 100 {
+            [s 0 master_failover_state] == "no-failover"
+        } else {
+            fail "Failover from node_0 to replica did not finish"
+        }
+
+        assert_equal [$rd read] "OK"
+        $rd close
+
+        # restore access to psync
+        $node_1 acl setuser default +psync
+
+        # We need to make sure the nodes actually sync back up
+        wait_for_sync $node_1
+        wait_for_sync $node_2
+
+        assert_match *master* [$node_0 role]
+        assert_match *slave* [$node_1 role]
+        assert_match *slave* [$node_2 role]
+
+        # We will cycle all of our replicas here and force a psync.
+        assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 2
+        assert_equal [expr [s 0 sync_full] - $initial_syncs] 0
+
+        assert_equal [count_log_message 0 "Failover target rejected psync request"] 1
+        assert_digests_match $node_0 $node_1 $node_2
+    }
+}
+}
+}