diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/sem.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/sem.c | 253 |
1 files changed, 253 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/sem.c b/src/libs/xpcom18a4/nsprpub/pr/tests/sem.c new file mode 100644 index 00000000..09c9f3cd --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/sem.c @@ -0,0 +1,253 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** +** Name: sem.c +** +** Description: Tests Semaphonre functions. +** +** Modification History: +** 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +***********************************************************************/ + +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include "plgetopt.h" + +#include "nspr.h" +#include "prpriv.h" + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +PRIntn failed_already=0; +PRIntn debug_mode; + +/* + Since we don't have stdin, stdout everywhere, we will fake + it with our in-memory buffers called stdin and stdout. +*/ + +#define SBSIZE 1024 + +#ifdef XP_MAC +#include "prlog.h" +#include "prsem.h" +#define printf PR_LogPrint +extern void SetupMacPrintfLog(char *logFile); +#else +#include "obsolete/prsem.h" +#endif + +static char stdinBuf[SBSIZE]; +static char stdoutBuf[SBSIZE]; + +static PRUintn stdinBufIdx = 0; +static PRUintn stdoutBufIdx = 0; +static PRStatus finalResult = PR_SUCCESS; + + +static size_t dread (PRUintn device, char *buf, size_t bufSize) +{ + PRUintn i; + + /* during first read call, initialize the stdinBuf buffer*/ + if (stdinBufIdx == 0) { + for (i=0; i<SBSIZE; i++) + stdinBuf[i] = i; + } + + /* now copy data from stdinBuf to the given buffer upto bufSize */ + for (i=0; i<bufSize; i++) { + if (stdinBufIdx == SBSIZE) + break; + buf[i] = stdinBuf[stdinBufIdx++]; + } + + return i; +} + +static size_t dwrite (PRUintn device, char *buf, size_t bufSize) +{ + PRUintn i, j; + + /* copy data from the given buffer upto bufSize to stdoutBuf */ + for (i=0; i<bufSize; i++) { + if (stdoutBufIdx == SBSIZE) + break; + stdoutBuf[stdoutBufIdx++] = buf[i]; + } + + /* during last write call, compare the two buffers */ + if (stdoutBufIdx == SBSIZE) + for (j=0; j<SBSIZE; j++) + if (stdinBuf[j] != stdoutBuf[j]) { + if (debug_mode) printf("data mismatch for index= %d \n", j); + finalResult = PR_FAILURE; + } + + return i; +} + +/*------------------ Following is the real test program ---------*/ +/* + Program to copy standard input to standard output. The program + uses two threads. One reads the input and puts the data in a + double buffer. The other reads the buffer contents and writes + it to standard output. +*/ + +PRSemaphore *emptyBufs; /* number of empty buffers */ +PRSemaphore *fullBufs; /* number of buffers that are full */ + +#define BSIZE 100 + +struct { + char data[BSIZE]; + PRUintn nbytes; /* number of bytes in this buffer */ +} buf[2]; + +static void PR_CALLBACK reader(void *arg) +{ + PRUintn i = 0; + size_t nbytes; + + do { + (void) PR_WaitSem(emptyBufs); + nbytes = dread(0, buf[i].data, BSIZE); + buf[i].nbytes = nbytes; + PR_PostSem(fullBufs); + i = (i + 1) % 2; + } while (nbytes > 0); +} + +static void writer(void) +{ + PRUintn i = 0; + size_t nbytes; + + do { + (void) PR_WaitSem(fullBufs); + nbytes = buf[i].nbytes; + if (nbytes > 0) { + nbytes = dwrite(1, buf[i].data, nbytes); + PR_PostSem(emptyBufs); + i = (i + 1) % 2; + } + } while (nbytes > 0); +} + +int main(int argc, char **argv) +{ + PRThread *r; + + PR_STDIO_INIT(); + PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); + + { + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "d:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + } + + /* main test */ + +#ifdef XP_MAC + SetupMacPrintfLog("sem.log"); + debug_mode = 1; +#endif + + emptyBufs = PR_NewSem(2); /* two empty buffers */ + + fullBufs = PR_NewSem(0); /* zero full buffers */ + + /* create the reader thread */ + + r = PR_CreateThread(PR_USER_THREAD, + reader, 0, + PR_PRIORITY_NORMAL, + PR_LOCAL_THREAD, + PR_UNJOINABLE_THREAD, + 0); + + /* Do the writer operation in this thread */ + writer(); + + PR_DestroySem(emptyBufs); + PR_DestroySem(fullBufs); + + if (finalResult == PR_SUCCESS) { + if (debug_mode) printf("sem Test Passed.\n"); + } + else{ + if (debug_mode) printf("sem Test Failed.\n"); + failed_already=1; + } + PR_Cleanup(); + if(failed_already) + return 1; + else + return 0; +} |