diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/udpsrv.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/udpsrv.c | 566 |
1 files changed, 566 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/udpsrv.c b/src/libs/xpcom18a4/nsprpub/pr/tests/udpsrv.c new file mode 100644 index 00000000..b9b615a2 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/udpsrv.c @@ -0,0 +1,566 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/******************************************************************* +** udpsrc.c -- Test basic function of UDP server +** +** udpsrv operates on the same machine with program udpclt. +** udpsrv is the server side of a udp sockets application. +** udpclt is the client side of a udp sockets application. +** +** The test is designed to assist developers in porting/debugging +** the UDP socket functions of NSPR. +** +** This test is not a stress test. +** +** main() starts two threads: UDP_Server() and UDP_Client(); +** main() uses PR_JoinThread() to wait for the threads to complete. +** +** UDP_Server() does repeated recvfrom()s from a socket. +** He detects an EOF condition set by UDP_Client(). For each +** packet received by UDP_Server(), he checks its content for +** expected content, then sends the packet back to UDP_Client(). +** +** UDP_Client() sends packets to UDP_Server() using sendto() +** he recieves packets back from the server via recvfrom(). +** After he sends enough packets containing UDP_AMOUNT_TO_WRITE +** bytes of data, he sends an EOF message. +** +** The test issues a pass/fail message at end. +** +** Notes: +** The variable "_debug_on" can be set to 1 to cause diagnostic +** messages related to client/server synchronization. Useful when +** the test hangs. +** +** Error messages are written to stdout. +** +******************************************************************** +*/ +/* --- include files --- */ +#include "nspr.h" +#include "prpriv.h" + +#include "plgetopt.h" +#include "prttools.h" + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <errno.h> + +#ifdef XP_PC +#define mode_t int +#endif + +#define UDP_BUF_SIZE 4096 +#define UDP_DGRAM_SIZE 128 +#define UDP_AMOUNT_TO_WRITE (PRInt32)((UDP_DGRAM_SIZE * 1000l) +1) +#define NUM_UDP_CLIENTS 1 +#define NUM_UDP_DATAGRAMS_PER_CLIENT 5 +#define UDP_SERVER_PORT 9050 +#define UDP_CLIENT_PORT 9053 +#define MY_INADDR PR_INADDR_ANY +#define PEER_INADDR PR_INADDR_LOOPBACK + +#define UDP_TIMEOUT 400000 +/* #define UDP_TIMEOUT PR_INTERVAL_NO_TIMEOUT */ + +/* --- static data --- */ +static PRIntn _debug_on = 0; +static PRBool passed = PR_TRUE; +static PRUint32 cltBytesRead = 0; +static PRUint32 srvBytesRead = 0; +static PRFileDesc *output = NULL; + +/* --- static function declarations --- */ +#define DPRINTF(arg) if (_debug_on) PR_fprintf(output, arg) + + + +/******************************************************************* +** ListNetAddr() -- Display the Net Address on stdout +** +** Description: displays the component parts of a PRNetAddr struct +** +** Arguments: address of PRNetAddr structure to display +** +** Returns: void +** +** Notes: +** +******************************************************************** +*/ +void ListNetAddr( char *msg, PRNetAddr *na ) +{ + char mbuf[256]; + + sprintf( mbuf, "ListNetAddr: %s family: %d, port: %d, ip: %8.8X\n", + msg, na->inet.family, PR_ntohs( na->inet.port), PR_ntohl(na->inet.ip) ); +#if 0 + DPRINTF( mbuf ); +#endif +} /* --- end ListNetAddr() --- */ + +/******************************************************************** +** UDP_Server() -- Test a UDP server application +** +** Description: The Server side of a UDP Client/Server application. +** +** Arguments: none +** +** Returns: void +** +** Notes: +** +** +******************************************************************** +*/ +static void PR_CALLBACK UDP_Server( void *arg ) +{ + static char svrBuf[UDP_BUF_SIZE]; + PRFileDesc *svrSock; + PRInt32 rv; + PRNetAddr netaddr; + PRBool bound = PR_FALSE; + PRBool endOfInput = PR_FALSE; + PRInt32 numBytes = UDP_DGRAM_SIZE; + + DPRINTF("udpsrv: UDP_Server(): starting\n" ); + + /* --- Create the socket --- */ + DPRINTF("udpsrv: UDP_Server(): Creating UDP Socket\n" ); + svrSock = PR_NewUDPSocket(); + if ( svrSock == NULL ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Server(): PR_NewUDPSocket() returned NULL\n" ); + return; + } + + /* --- Initialize the sockaddr_in structure --- */ + memset( &netaddr, 0, sizeof( netaddr )); + netaddr.inet.family = PR_AF_INET; + netaddr.inet.port = PR_htons( UDP_SERVER_PORT ); + netaddr.inet.ip = PR_htonl( MY_INADDR ); + + /* --- Bind the socket --- */ + while ( !bound ) + { + DPRINTF("udpsrv: UDP_Server(): Binding socket\n" ); + rv = PR_Bind( svrSock, &netaddr ); + if ( rv < 0 ) + { + if ( PR_GetError() == PR_ADDRESS_IN_USE_ERROR ) + { + if (debug_mode) PR_fprintf(output, "udpsrv: UDP_Server(): \ + PR_Bind(): reports: PR_ADDRESS_IN_USE_ERROR\n"); + PR_Sleep( PR_MillisecondsToInterval( 2000 )); + continue; + } + else + { + passed = PR_FALSE; + if (debug_mode) PR_fprintf(output, "udpsrv: UDP_Server(): \ + PR_Bind(): failed: %ld with error: %ld\n", + rv, PR_GetError() ); + PR_Close( svrSock ); + return; + } + } + else + bound = PR_TRUE; + } + ListNetAddr( "UDP_Server: after bind", &netaddr ); + + /* --- Recv the socket --- */ + while( !endOfInput ) + { + DPRINTF("udpsrv: UDP_Server(): RecvFrom() socket\n" ); + rv = PR_RecvFrom( svrSock, svrBuf, numBytes, 0, &netaddr, UDP_TIMEOUT ); + if ( rv == -1 ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Server(): PR_RecvFrom(): failed with error: %ld\n", + PR_GetError() ); + PR_Close( svrSock ); + return; + } + ListNetAddr( "UDP_Server after RecvFrom", &netaddr ); + + srvBytesRead += rv; + + if ( svrBuf[0] == 'E' ) + { + DPRINTF("udpsrv: UDP_Server(): EOF on input detected\n" ); + endOfInput = PR_TRUE; + } + + /* --- Send the socket --- */ + DPRINTF("udpsrv: UDP_Server(): SendTo(): socket\n" ); + rv = PR_SendTo( svrSock, svrBuf, rv, 0, &netaddr, PR_INTERVAL_NO_TIMEOUT ); + if ( rv == -1 ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Server(): PR_SendTo(): failed with error: %ld\n", + PR_GetError() ); + PR_Close( svrSock ); + return; + } + ListNetAddr( "UDP_Server after SendTo", &netaddr ); + } + + /* --- Close the socket --- */ + DPRINTF("udpsrv: UDP_Server(): Closing socket\n" ); + rv = PR_Close( svrSock ); + if ( rv != PR_SUCCESS ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Server(): PR_Close(): failed to close socket\n" ); + return; + } + + DPRINTF("udpsrv: UDP_Server(): Normal end\n" ); +} /* --- end UDP_Server() --- */ + + +static char cltBuf[UDP_BUF_SIZE]; +static char cltBufin[UDP_BUF_SIZE]; +/******************************************************************** +** UDP_Client() -- Test a UDP client application +** +** Description: +** +** Arguments: +** +** +** Returns: +** 0 -- Successful execution +** 1 -- Test failed. +** +** Notes: +** +** +******************************************************************** +*/ +static void PR_CALLBACK UDP_Client( void *arg ) +{ + PRFileDesc *cltSock; + PRInt32 rv; + PRBool bound = PR_FALSE; + PRNetAddr netaddr; + PRNetAddr netaddrx; + PRBool endOfInput = PR_FALSE; + PRInt32 numBytes = UDP_DGRAM_SIZE; + PRInt32 writeThisMany = UDP_AMOUNT_TO_WRITE; + int i; + + + DPRINTF("udpsrv: UDP_Client(): starting\n" ); + + /* --- Create the socket --- */ + cltSock = PR_NewUDPSocket(); + if ( cltSock == NULL ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Client(): PR_NewUDPSocket() returned NULL\n" ); + return; + } + + /* --- Initialize the sockaddr_in structure --- */ + memset( &netaddr, 0, sizeof( netaddr )); + netaddr.inet.family = PR_AF_INET; + netaddr.inet.ip = PR_htonl( MY_INADDR ); + netaddr.inet.port = PR_htons( UDP_CLIENT_PORT ); + + /* --- Initialize the write buffer --- */ + for ( i = 0; i < UDP_BUF_SIZE ; i++ ) + cltBuf[i] = i; + + /* --- Bind the socket --- */ + while ( !bound ) + { + DPRINTF("udpsrv: UDP_Client(): Binding socket\n" ); + rv = PR_Bind( cltSock, &netaddr ); + if ( rv < 0 ) + { + if ( PR_GetError() == PR_ADDRESS_IN_USE_ERROR ) + { + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Client(): PR_Bind(): reports: PR_ADDRESS_IN_USE_ERROR\n"); + PR_Sleep( PR_MillisecondsToInterval( 2000 )); + continue; + } + else + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Client(): PR_Bind(): failed: %ld with error: %ld\n", + rv, PR_GetError() ); + PR_Close( cltSock ); + return; + } + } + else + bound = PR_TRUE; + } + ListNetAddr( "UDP_Client after Bind", &netaddr ); + + /* --- Initialize the sockaddr_in structure --- */ + memset( &netaddr, 0, sizeof( netaddr )); + netaddr.inet.family = PR_AF_INET; + netaddr.inet.ip = PR_htonl( PEER_INADDR ); + netaddr.inet.port = PR_htons( UDP_SERVER_PORT ); + + /* --- send and receive packets until no more data left */ + while( !endOfInput ) + { + /* + ** Signal EOF in the data stream on the last packet + */ + if ( writeThisMany <= UDP_DGRAM_SIZE ) + { + DPRINTF("udpsrv: UDP_Client(): Send EOF packet\n" ); + cltBuf[0] = 'E'; + endOfInput = PR_TRUE; + } + + /* --- SendTo the socket --- */ + if ( writeThisMany > UDP_DGRAM_SIZE ) + numBytes = UDP_DGRAM_SIZE; + else + numBytes = writeThisMany; + writeThisMany -= numBytes; + { + char mbuf[256]; + sprintf( mbuf, "udpsrv: UDP_Client(): write_this_many: %d, numbytes: %d\n", + writeThisMany, numBytes ); + DPRINTF( mbuf ); + } + + DPRINTF("udpsrv: UDP_Client(): SendTo(): socket\n" ); + rv = PR_SendTo( cltSock, cltBuf, numBytes, 0, &netaddr, UDP_TIMEOUT ); + if ( rv == -1 ) + { + passed = PR_FALSE; + if (debug_mode) + PR_fprintf(output, + "udpsrv: UDP_Client(): PR_SendTo(): failed with error: %ld\n", + PR_GetError() ); + PR_Close( cltSock ); + return; + } + ListNetAddr( "UDP_Client after SendTo", &netaddr ); + + /* --- RecvFrom the socket --- */ + memset( cltBufin, 0, UDP_BUF_SIZE ); + DPRINTF("udpsrv: UDP_Client(): RecvFrom(): socket\n" ); + rv = PR_RecvFrom( cltSock, cltBufin, numBytes, 0, &netaddrx, UDP_TIMEOUT ); + if ( rv == -1 ) + { + passed = PR_FALSE; + if (debug_mode) PR_fprintf(output, + "udpsrv: UDP_Client(): PR_RecvFrom(): failed with error: %ld\n", + PR_GetError() ); + PR_Close( cltSock ); + return; + } + ListNetAddr( "UDP_Client after RecvFrom()", &netaddr ); + cltBytesRead += rv; + + /* --- verify buffer --- */ + for ( i = 0; i < rv ; i++ ) + { + if ( cltBufin[i] != i ) + { + /* --- special case, end of input --- */ + if ( endOfInput && i == 0 && cltBufin[0] == 'E' ) + continue; + passed = PR_FALSE; + if (debug_mode) PR_fprintf(output, + "udpsrv: UDP_Client(): return data mismatch\n" ); + PR_Close( cltSock ); + return; + } + } + if (debug_mode) PR_fprintf(output, "."); + } + + /* --- Close the socket --- */ + DPRINTF("udpsrv: UDP_Server(): Closing socket\n" ); + rv = PR_Close( cltSock ); + if ( rv != PR_SUCCESS ) + { + passed = PR_FALSE; + if (debug_mode) PR_fprintf(output, + "udpsrv: UDP_Client(): PR_Close(): failed to close socket\n" ); + return; + } + DPRINTF("udpsrv: UDP_Client(): ending\n" ); +} /* --- end UDP_Client() --- */ + +/******************************************************************** +** main() -- udpsrv +** +** arguments: +** +** Returns: +** 0 -- Successful execution +** 1 -- Test failed. +** +** Description: +** +** Standard test case setup. +** +** Calls the function UDP_Server() +** +******************************************************************** +*/ + +int main(int argc, char **argv) +{ + PRThread *srv, *clt; +/* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d -v + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "dv"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + case 'v': /* verbose mode */ + _debug_on = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + + PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); + PR_STDIO_INIT(); + output = PR_STDERR; + +#ifdef XP_MAC + SetupMacPrintfLog("udpsrv.log"); +#endif + + PR_SetConcurrency(4); + + /* + ** Create the Server thread + */ + DPRINTF( "udpsrv: Creating Server Thread\n" ); + srv = PR_CreateThread( PR_USER_THREAD, + UDP_Server, + (void *) 0, + PR_PRIORITY_LOW, + PR_LOCAL_THREAD, + PR_JOINABLE_THREAD, + 0 ); + if ( srv == NULL ) + { + if (debug_mode) PR_fprintf(output, "udpsrv: Cannot create server thread\n" ); + passed = PR_FALSE; + } + + /* + ** Give the Server time to Start + */ + DPRINTF( "udpsrv: Pausing to allow Server to start\n" ); + PR_Sleep( PR_MillisecondsToInterval(200) ); + + /* + ** Create the Client thread + */ + DPRINTF( "udpsrv: Creating Client Thread\n" ); + clt = PR_CreateThread( PR_USER_THREAD, + UDP_Client, + (void *) 0, + PR_PRIORITY_LOW, + PR_LOCAL_THREAD, + PR_JOINABLE_THREAD, + 0 ); + if ( clt == NULL ) + { + if (debug_mode) PR_fprintf(output, "udpsrv: Cannot create server thread\n" ); + passed = PR_FALSE; + } + + /* + ** + */ + DPRINTF("udpsrv: Waiting to join Server & Client Threads\n" ); + PR_JoinThread( srv ); + PR_JoinThread( clt ); + + /* + ** Evaluate test results + */ + if (debug_mode) PR_fprintf(output, "\n\nudpsrv: main(): cltBytesRead(%ld), \ + srvBytesRead(%ld), expected(%ld)\n", + cltBytesRead, srvBytesRead, UDP_AMOUNT_TO_WRITE ); + if ( cltBytesRead != srvBytesRead || cltBytesRead != UDP_AMOUNT_TO_WRITE ) + { + passed = PR_FALSE; + } + PR_Cleanup(); + if ( passed ) + return 0; + else + return 1; +} /* --- end main() --- */ |