Adding upstream version 1:9.16.44.upstream/1%9.16.44

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

11 files changed, 931 insertions, 0 deletions

diff --git a/bin/tests/system/nsec3/clean.sh b/bin/tests/system/nsec3/clean.sh
new file mode 100644
index 0000000..b8e8317
--- /dev/null
+++ b/bin/tests/system/nsec3/clean.sh
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+set -e
+
+rm -f dig.out.* rndc.signing.* update.out.* verify.out.*
+rm -f ns*/named.conf ns*/named.memstats ns*/named.run*
+rm -f ns*/*.jnl ns*/*.jbk ns*/managed-keys.bind
+rm -f ns*/K*.private ns*/K*.key ns*/K*.state
+rm -f ns*/dsset-* ns*/*.db ns*/*.db.signed
+
diff --git a/bin/tests/system/nsec3/ns2/named.conf.in b/bin/tests/system/nsec3/ns2/named.conf.in
new file mode 100644
index 0000000..d6caf15
--- /dev/null
+++ b/bin/tests/system/nsec3/ns2/named.conf.in
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ *
+ * SPDX-License-Identifier: MPL-2.0
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0.  If a copy of the MPL was not distributed with this
+ * file, you can obtain one at https://mozilla.org/MPL/2.0/.
+ *
+ * See the COPYRIGHT file distributed with this work for additional
+ * information regarding copyright ownership.
+ */
+
+// NS2
+
+dnssec-policy "nsec3" {
+	nsec3param;
+};
+
+options {
+	query-source address 10.53.0.2;
+	notify-source 10.53.0.2;
+	transfer-source 10.53.0.2;
+	port @PORT@;
+	pid-file "named.pid";
+	listen-on { 10.53.0.2; };
+	listen-on-v6 { none; };
+	allow-transfer { any; };
+	recursion no;
+};
+
+key rndc_key {
+	secret "1234abcd8765";
+	algorithm @DEFAULT_HMAC@;
+};
+
+controls {
+	inet 10.53.0.2 port @CONTROLPORT@ allow { any; } keys { rndc_key; };
+};
+
+zone "nsec3-xfr-inline.kasp" {
+	type primary;
+	file "nsec3-xfr-inline.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
diff --git a/bin/tests/system/nsec3/ns2/setup.sh b/bin/tests/system/nsec3/ns2/setup.sh
new file mode 100644
index 0000000..1cbe02f
--- /dev/null
+++ b/bin/tests/system/nsec3/ns2/setup.sh
@@ -0,0 +1,22 @@
+#!/bin/sh -e
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+# shellcheck source=conf.sh
+. ../../conf.sh
+
+echo_i "ns2/setup.sh"
+
+zone="nsec3-xfr-inline.kasp"
+echo_i "setting up zone: $zone"
+zonefile="${zone}.db"
+cp template.db.in "$zonefile"
diff --git a/bin/tests/system/nsec3/ns2/template.db.in b/bin/tests/system/nsec3/ns2/template.db.in
new file mode 100644
index 0000000..8379c37
--- /dev/null
+++ b/bin/tests/system/nsec3/ns2/template.db.in
@@ -0,0 +1,28 @@
+; Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+;
+; SPDX-License-Identifier: MPL-2.0
+;
+; This Source Code Form is subject to the terms of the Mozilla Public
+; License, v. 2.0.  If a copy of the MPL was not distributed with this
+; file, you can obtain one at https://mozilla.org/MPL/2.0/.
+;
+; See the COPYRIGHT file distributed with this work for additional
+; information regarding copyright ownership.
+
+$TTL 300
+@		IN	SOA  mname1. . (
+			1       ; serial
+			20      ; refresh (20 seconds)
+			20      ; retry (20 seconds)
+			1814400 ; expire (3 weeks)
+			3600    ; minimum (1 hour)
+			)
+
+			NS	ns2
+ns2			A	10.53.0.2
+ns3			A	10.53.0.3
+
+a			A	10.0.0.1
+b			A	10.0.0.2
+c			A	10.0.0.3
+
diff --git a/bin/tests/system/nsec3/ns3/named.conf.in b/bin/tests/system/nsec3/ns3/named.conf.in
new file mode 100644
index 0000000..4324f2d
--- /dev/null
+++ b/bin/tests/system/nsec3/ns3/named.conf.in
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ *
+ * SPDX-License-Identifier: MPL-2.0
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0.  If a copy of the MPL was not distributed with this
+ * file, you can obtain one at https://mozilla.org/MPL/2.0/.
+ *
+ * See the COPYRIGHT file distributed with this work for additional
+ * information regarding copyright ownership.
+ */
+
+// NS3
+
+dnssec-policy "nsec" {
+	// no need to change configuration: if no 'nsec3param' is set,
+	// NSEC will be used;
+};
+
+dnssec-policy "nsec3" {
+	nsec3param;
+};
+
+dnssec-policy "optout" {
+	nsec3param optout yes;
+};
+
+dnssec-policy "nsec3-other" {
+	nsec3param iterations 11 optout yes salt-length 0;
+};
+
+options {
+	query-source address 10.53.0.3;
+	notify-source 10.53.0.3;
+	transfer-source 10.53.0.3;
+	port @PORT@;
+	pid-file "named.pid";
+	listen-on { 10.53.0.3; };
+	listen-on-v6 { none; };
+	allow-transfer { any; };
+	recursion no;
+};
+
+key rndc_key {
+	secret "1234abcd8765";
+	algorithm hmac-sha256;
+};
+
+controls {
+	inet 10.53.0.3 port @CONTROLPORT@ allow { any; } keys { rndc_key; };
+};
+
+/* This zone starts with NSEC, but will be reconfigured to use NSEC3. */
+zone "nsec-to-nsec3.kasp" {
+	type primary;
+	file "nsec-to-nsec3.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec";
+};
+
+/* These zones use the default NSEC3 settings. */
+zone "nsec3.kasp" {
+	type primary;
+	file "nsec3.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+zone "nsec3-dynamic.kasp" {
+	type primary;
+	file "nsec3-dynamic.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+/* This zone uses non-default NSEC3 settings. */
+zone "nsec3-other.kasp" {
+	type primary;
+	file "nsec3-other.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3-other";
+};
+
+/* These zones will be reconfigured to use other NSEC3 settings. */
+zone "nsec3-change.kasp" {
+	type primary;
+	file "nsec3-change.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+zone "nsec3-dynamic-change.kasp" {
+	type primary;
+	file "nsec3-dynamic-change.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+/* The zone will be reconfigured to use opt-out. */
+zone "nsec3-to-optout.kasp" {
+	type primary;
+	file "nsec3-to-optout.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+/* The zone will be reconfigured to disable opt-out. */
+zone "nsec3-from-optout.kasp" {
+	type primary;
+	file "nsec3-from-optout.kasp.db";
+	inline-signing yes;
+	dnssec-policy "optout";
+};
+
+/* The zone starts with NSEC3, but will be reconfigured to use NSEC. */
+zone "nsec3-to-nsec.kasp" {
+	type primary;
+	file "nsec3-to-nsec.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+/* The zone fails to load, this should not prevent shutdown. */
+zone "nsec3-fails-to-load.kasp" {
+	type primary;
+	file "nsec3-fails-to-load.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+/* These zones switch from dynamic to inline-signing or vice versa. */
+zone "nsec3-dynamic-to-inline.kasp" {
+	type primary;
+	file "nsec3-dynamic-to-inline.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+zone "nsec3-inline-to-dynamic.kasp" {
+	type primary;
+	file "nsec3-inline-to-dynamic.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+/* Test adding a NSEC3 record to an inline-signing dnssec-policy zone. */
+zone "nsec3-dynamic-update-inline.kasp" {
+	type primary;
+	file "nsec3-dynamic-update-inline.kasp.db";
+	inline-signing yes;
+	allow-update { any; };
+	dnssec-policy "nsec";
+};
+
+zone "nsec3-xfr-inline.kasp" {
+	type secondary;
+	file "nsec3-xfr-inline.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec";
+	primaries { 10.53.0.2; };
+};
diff --git a/bin/tests/system/nsec3/ns3/named2.conf.in b/bin/tests/system/nsec3/ns3/named2.conf.in
new file mode 100644
index 0000000..5c3b970
--- /dev/null
+++ b/bin/tests/system/nsec3/ns3/named2.conf.in
@@ -0,0 +1,153 @@
+/*
+ * Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+ *
+ * SPDX-License-Identifier: MPL-2.0
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0.  If a copy of the MPL was not distributed with this
+ * file, you can obtain one at https://mozilla.org/MPL/2.0/.
+ *
+ * See the COPYRIGHT file distributed with this work for additional
+ * information regarding copyright ownership.
+ */
+
+// NS3
+
+dnssec-policy "nsec" {
+	// no need to change configuration: if no 'nsec3param' is set,
+	// NSEC will be used;
+};
+
+dnssec-policy "nsec3" {
+	nsec3param;
+};
+
+dnssec-policy "optout" {
+	nsec3param optout yes;
+};
+
+dnssec-policy "nsec3-other" {
+	nsec3param iterations 11 optout yes salt-length 0;
+};
+
+options {
+	query-source address 10.53.0.3;
+	notify-source 10.53.0.3;
+	transfer-source 10.53.0.3;
+	port @PORT@;
+	pid-file "named.pid";
+	listen-on { 10.53.0.3; };
+	listen-on-v6 { none; };
+	allow-transfer { any; };
+	recursion no;
+};
+
+key rndc_key {
+	secret "1234abcd8765";
+	algorithm hmac-sha256;
+};
+
+controls {
+	inet 10.53.0.3 port @CONTROLPORT@ allow { any; } keys { rndc_key; };
+};
+
+/* This zone starts with NSEC, but will be reconfigured to use NSEC3. */
+zone "nsec-to-nsec3.kasp" {
+	type primary;
+	file "nsec-to-nsec3.kasp.db";
+	inline-signing yes;
+	//dnssec-policy "nsec";
+	dnssec-policy "nsec3";
+};
+
+/* These zones use the default NSEC3 settings. */
+zone "nsec3.kasp" {
+	type primary;
+	file "nsec3.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+};
+
+zone "nsec3-dynamic.kasp" {
+	type primary;
+	file "nsec3-dynamic.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+/* This zone uses non-default NSEC3 settings. */
+zone "nsec3-other.kasp" {
+	type primary;
+	file "nsec3-other.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3-other";
+};
+
+/* These zone will be reconfigured to use other NSEC3 settings. */
+zone "nsec3-change.kasp" {
+	type primary;
+	file "nsec3-change.kasp.db";
+	inline-signing yes;
+	//dnssec-policy "nsec3";
+	dnssec-policy "nsec3-other";
+};
+
+zone "nsec3-dynamic-change.kasp" {
+	type primary;
+	file "nsec3-dynamic-change.kasp.db";
+	//dnssec-policy "nsec3";
+	dnssec-policy "nsec3-other";
+	allow-update { any; };
+};
+
+/* The zone will be reconfigured to use opt-out. */
+zone "nsec3-to-optout.kasp" {
+	type primary;
+	file "nsec3-to-optout.kasp.db";
+	inline-signing yes;
+	//dnssec-policy "nsec3";
+	dnssec-policy "optout";
+};
+
+/* The zone will be reconfigured to disable opt-out. */
+zone "nsec3-from-optout.kasp" {
+	type primary;
+	file "nsec3-from-optout.kasp.db";
+	inline-signing yes;
+	//dnssec-policy "optout";
+	dnssec-policy "nsec3";
+};
+
+/* The zone starts with NSEC3, but will be reconfigured to use NSEC. */
+zone "nsec3-to-nsec.kasp" {
+	type primary;
+	file "nsec3-to-nsec.kasp.db";
+	inline-signing yes;
+	//dnssec-policy "nsec3";
+	dnssec-policy "nsec";
+};
+
+/* The zone fails to load, but is fixed after a reload. */
+zone "nsec3-fails-to-load.kasp" {
+	type primary;
+	file "nsec3-fails-to-load.kasp.db";
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+/* These zones switch from dynamic to inline-signing or vice versa. */
+zone "nsec3-dynamic-to-inline.kasp" {
+	type primary;
+	file "nsec3-dynamic-to-inline.kasp.db";
+	inline-signing yes;
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
+
+zone "nsec3-inline-to-dynamic.kasp" {
+	type primary;
+	file "nsec3-inline-to-dynamic.kasp.db";
+	inline-signing no;
+	dnssec-policy "nsec3";
+	allow-update { any; };
+};
diff --git a/bin/tests/system/nsec3/ns3/nsec3-fails-to-load.kasp.db.in b/bin/tests/system/nsec3/ns3/nsec3-fails-to-load.kasp.db.in
new file mode 100644
index 0000000..77b0d10
--- /dev/null
+++ b/bin/tests/system/nsec3/ns3/nsec3-fails-to-load.kasp.db.in
@@ -0,0 +1,19 @@
+; Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+;
+; SPDX-License-Identifier: MPL-2.0
+;
+; This Source Code Form is subject to the terms of the Mozilla Public
+; License, v. 2.0.  If a copy of the MPL was not distributed with this
+; file, you can obtain one at https://mozilla.org/MPL/2.0/.
+;
+; See the COPYRIGHT file distributed with this work for additional
+; information regarding copyright ownership.
+
+@			IN SOA  kasp. nsec3-fails-to-load.kasp. (
+                                1          ; serial
+                                30         ; refresh (30 seconds)
+                                10         ; retry (10 seconds)
+                                3600000    ; expire (5 weeks 6 days 16 hours)
+                                300        ; minimum (5 minutes)
+                                )
+                        NS      nsec3-fails-to-load.kasp.
diff --git a/bin/tests/system/nsec3/ns3/setup.sh b/bin/tests/system/nsec3/ns3/setup.sh
new file mode 100644
index 0000000..b7c449a
--- /dev/null
+++ b/bin/tests/system/nsec3/ns3/setup.sh
@@ -0,0 +1,35 @@
+#!/bin/sh -e
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+# shellcheck source=conf.sh
+. ../../conf.sh
+
+echo_i "ns3/setup.sh"
+
+setup() {
+	zone="$1"
+	echo_i "setting up zone: $zone"
+	zonefile="${zone}.db"
+	infile="${zone}.db.infile"
+	cp template.db.in "$zonefile"
+}
+
+for zn in nsec-to-nsec3 nsec3 nsec3-other nsec3-change nsec3-to-nsec \
+	  nsec3-to-optout nsec3-from-optout nsec3-dynamic \
+	  nsec3-dynamic-change nsec3-dynamic-to-inline \
+	  nsec3-inline-to-dynamic nsec3-dynamic-update-inline
+do
+	setup "${zn}.kasp"
+done
+
+cp nsec3-fails-to-load.kasp.db.in nsec3-fails-to-load.kasp.db
diff --git a/bin/tests/system/nsec3/ns3/template.db.in b/bin/tests/system/nsec3/ns3/template.db.in
new file mode 100644
index 0000000..010b05b
--- /dev/null
+++ b/bin/tests/system/nsec3/ns3/template.db.in
@@ -0,0 +1,27 @@
+; Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+;
+; SPDX-License-Identifier: MPL-2.0
+;
+; This Source Code Form is subject to the terms of the Mozilla Public
+; License, v. 2.0.  If a copy of the MPL was not distributed with this
+; file, you can obtain one at https://mozilla.org/MPL/2.0/.
+;
+; See the COPYRIGHT file distributed with this work for additional
+; information regarding copyright ownership.
+
+$TTL 300
+@		IN	SOA  mname1. . (
+			1       ; serial
+			20      ; refresh (20 seconds)
+			20      ; retry (20 seconds)
+			1814400 ; expire (3 weeks)
+			3600    ; minimum (1 hour)
+			)
+
+			NS	ns3
+ns3			A	10.53.0.3
+
+a			A	10.0.0.1
+b			A	10.0.0.2
+c			A	10.0.0.3
+
diff --git a/bin/tests/system/nsec3/setup.sh b/bin/tests/system/nsec3/setup.sh
new file mode 100644
index 0000000..bdd1ae9
--- /dev/null
+++ b/bin/tests/system/nsec3/setup.sh
@@ -0,0 +1,30 @@
+#!/bin/sh -e
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+# shellcheck source=conf.sh
+. ../conf.sh
+
+set -e
+
+$SHELL clean.sh
+
+copy_setports ns2/named.conf.in ns2/named.conf
+(
+	cd ns2
+	$SHELL setup.sh
+)
+copy_setports ns3/named.conf.in ns3/named.conf
+(
+	cd ns3
+	$SHELL setup.sh
+)
diff --git a/bin/tests/system/nsec3/tests.sh b/bin/tests/system/nsec3/tests.sh
new file mode 100644
index 0000000..0141103
--- /dev/null
+++ b/bin/tests/system/nsec3/tests.sh
@@ -0,0 +1,388 @@
+#!/bin/sh
+
+# Copyright (C) Internet Systems Consortium, Inc. ("ISC")
+#
+# SPDX-License-Identifier: MPL-2.0
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0.  If a copy of the MPL was not distributed with this
+# file, you can obtain one at https://mozilla.org/MPL/2.0/.
+#
+# See the COPYRIGHT file distributed with this work for additional
+# information regarding copyright ownership.
+
+# shellcheck source=conf.sh
+. ../conf.sh
+# shellcheck source=kasp.sh
+. ../kasp.sh
+
+# Log errors and increment $ret.
+log_error() {
+	echo_i "error: $1"
+	ret=$((ret+1))
+}
+
+# Call dig with default options.
+dig_with_opts() {
+	$DIG +tcp +noadd +nosea +nostat +nocmd +dnssec -p "$PORT" "$@"
+}
+
+# Call rndc.
+rndccmd() {
+    "$RNDC" -c ../common/rndc.conf -p "$CONTROLPORT" -s "$@"
+}
+
+# Set zone name ($1) and policy ($2) for testing nsec3.
+set_zone_policy() {
+	ZONE=$1
+	POLICY=$2
+}
+# Set expected NSEC3 parameters: flags ($1), iterations ($2), and
+# salt length ($3).
+set_nsec3param() {
+	FLAGS=$1
+	ITERATIONS=$2
+	SALTLEN=$3
+	# Reset salt.
+	SALT=""
+}
+
+# The apex NSEC3PARAM record indicates that it is signed.
+_wait_for_nsec3param() {
+	dig_with_opts +noquestion "@${SERVER}" "$ZONE" NSEC3PARAM > "dig.out.test$n.wait" || return 1
+	grep "${ZONE}\..*IN.*NSEC3PARAM.*1.*0.*${ITERATIONS}.*${SALT}" "dig.out.test$n.wait" > /dev/null || return 1
+	grep "${ZONE}\..*IN.*RRSIG" "dig.out.test$n.wait" > /dev/null || return 1
+        return 0
+}
+# The apex NSEC record indicates that it is signed.
+_wait_for_nsec() {
+	dig_with_opts +noquestion "@${SERVER}" "$ZONE" NSEC > "dig.out.test$n.wait" || return 1
+	grep "NS SOA" "dig.out.test$n.wait" > /dev/null || return 1
+	grep "${ZONE}\..*IN.*RRSIG" "dig.out.test$n.wait" > /dev/null || return 1
+	grep "${ZONE}\..*IN.*NSEC3PARAM" "dig.out.test$n.wait" > /dev/null && return 1
+        return 0
+}
+
+# Wait for the zone to be signed.
+wait_for_zone_is_signed() {
+	n=$((n+1))
+	ret=0
+	echo_i "wait for ${ZONE} to be signed ($n)"
+
+	if [ "$1" = "nsec3" ]; then
+		retry_quiet 10 _wait_for_nsec3param || log_error "wait for ${ZONE} to be signed failed"
+	else
+		retry_quiet 10 _wait_for_nsec || log_error "wait for ${ZONE} to be signed failed"
+	fi
+
+	test "$ret" -eq 0 || echo_i "failed"
+	status=$((status+ret))
+}
+
+# Test: check NSEC in answers
+_check_nsec_nsec3param()
+{
+	dig_with_opts +noquestion @$SERVER "${ZONE}" NSEC3PARAM > "dig.out.test$n.nsec3param.$ZONE" || return 1
+	grep "NSEC3PARAM" "dig.out.test$n.nsec3param.$ZONE" > /dev/null && return 1
+	return 0
+}
+
+_check_nsec_nxdomain()
+{
+	dig_with_opts @$SERVER "nosuchname.${ZONE}" > "dig.out.test$n.nxdomain.$ZONE" || return 1
+	grep "${ZONE}.*IN.*NSEC.*NS.*SOA.*RRSIG.*NSEC.*DNSKEY" "dig.out.test$n.nxdomain.$ZONE" > /dev/null || return 1
+	grep "NSEC3" "dig.out.test$n.nxdomain.$ZONE" > /dev/null && return 1
+	return 0
+}
+
+check_nsec()
+{
+	n=$((n+1))
+	echo_i "check NSEC3PARAM response for zone ${ZONE} ($n)"
+	ret=0
+	retry_quiet 10 _check_nsec_nsec3param || log_error "unexpected NSEC3PARAM in response for zone ${ZONE}"
+	test "$ret" -eq 0 || echo_i "failed"
+	status=$((status+ret))
+
+	n=$((n+1))
+	echo_i "check NXDOMAIN response for zone ${ZONE} ($n)"
+	ret=0
+	retry_quiet 10 _check_nsec_nxdomain || log_error "bad NXDOMAIN response for zone ${ZONE}"
+	test "$ret" -eq 0 || echo_i "failed"
+	status=$((status+ret))
+}
+
+# Test: check NSEC3 parameters in answers
+_check_nsec3_nsec3param()
+{
+	dig_with_opts +noquestion @$SERVER "${ZONE}" NSEC3PARAM > "dig.out.test$n.nsec3param.$ZONE" || return 1
+	grep "${ZONE}.*0.*IN.*NSEC3PARAM.*1.*0.*${ITERATIONS}.*${SALT}" "dig.out.test$n.nsec3param.$ZONE" > /dev/null || return 1
+
+	if [ -z "$SALT" ]; then
+		SALT=`awk '$4 == "NSEC3PARAM" { print $8 }' dig.out.test$n.nsec3param.$ZONE`
+	fi
+	return 0
+}
+
+_check_nsec3_nxdomain()
+{
+	dig_with_opts @$SERVER "nosuchname.${ZONE}" > "dig.out.test$n.nxdomain.$ZONE" || return 1
+	grep ".*\.${ZONE}.*IN.*NSEC3.*1.${FLAGS}.*${ITERATIONS}.*${SALT}" "dig.out.test$n.nxdomain.$ZONE" > /dev/null || return 1
+	return 0
+}
+
+check_nsec3()
+{
+	n=$((n+1))
+	echo_i "check that NSEC3PARAM 1 0 ${ITERATIONS} is published zone ${ZONE} ($n)"
+	ret=0
+	retry_quiet 10 _check_nsec3_nsec3param || log_error "bad NSEC3PARAM response for ${ZONE}"
+	test "$ret" -eq 0 || echo_i "failed"
+	status=$((status+ret))
+
+	n=$((n+1))
+	echo_i "check NXDOMAIN response has correct NSEC3 1 ${FLAGS} ${ITERATIONS} ${SALT} for zone ${ZONE} ($n)"
+	ret=0
+	retry_quiet 10 _check_nsec3_nxdomain || log_error "bad NXDOMAIN response for zone ${ZONE}"
+	test "$ret" -eq 0 || echo_i "failed"
+	status=$((status+ret))
+}
+
+start_time="$(TZ=UTC date +%s)"
+status=0
+n=0
+
+# Zone: nsec-to-nsec3.kasp.
+set_zone_policy "nsec-to-nsec3.kasp" "nsec"
+set_server "ns3" "10.53.0.3"
+echo_i "initial check zone ${ZONE}"
+check_nsec
+dnssec_verify
+
+# Zone: nsec3.kasp.
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dynamic.kasp.
+set_zone_policy "nsec3-dynamic.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-change.kasp.
+set_zone_policy "nsec3-change.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dynamic-change.kasp.
+set_zone_policy "nsec3-dynamic-change.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dynamic-to-inline.kasp.
+set_zone_policy "nsec3-dynamic-to-inline.kasp" "nsec3" 1 3600
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+
+# Zone: nsec3-inline-to-dynamic.kasp.
+set_zone_policy "nsec3-inline-to-dynamic.kasp" "nsec3" 1 3600
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+
+# Zone: nsec3-to-nsec.kasp.
+set_zone_policy "nsec3-to-nsec.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-to-optout.kasp.
+set_zone_policy "nsec3-to-optout.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-from-optout.kasp.
+set_zone_policy "nsec3-from-optout.kasp" "optout"
+set_nsec3param "1" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-other.kasp.
+set_zone_policy "nsec3-other.kasp" "nsec3-other"
+set_nsec3param "1" "11" "0"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-xfr-inline.kasp.
+# This is a secondary zone, where the primary is signed with NSEC3 but
+# the dnssec-policy dictates NSEC.
+set_zone_policy "nsec3-xfr-inline.kasp" "nsec" 1 3600
+echo_i "initial check zone ${ZONE}"
+check_nsec
+
+# Zone: nsec3-dynamic-update-inline.kasp.
+set_zone_policy "nsec3-dynamic-update-inline.kasp" "nsec" 1 3600
+echo_i "initial check zone ${ZONE}"
+check_nsec
+
+n=$((n+1))
+echo_i "dynamic update dnssec-policy zone ${ZONE} with NSEC3 ($n)"
+ret=0
+$NSUPDATE > update.out.$ZONE.test$n 2>&1 << END || ret=1
+server 10.53.0.3 ${PORT}
+zone ${ZONE}.
+update add 04O18462RI5903H8RDVL0QDT5B528DUJ.${ZONE}. 3600 NSEC3 0 0 0 408A4B2D412A4E95 1JMDDPMTFF8QQLIOINSIG4CR9OTICAOC A RRSIG
+send
+END
+wait_for_log 10 "updating zone '${ZONE}/IN': update failed: explicit NSEC3 updates are not allowed in secure zones (REFUSED)" ns3/named.run || ret=1
+check_nsec
+
+# Reconfig named.
+ret=0
+echo_i "reconfig dnssec-policy to trigger nsec3 rollovers"
+copy_setports ns3/named2.conf.in ns3/named.conf
+rndc_reconfig ns3 10.53.0.3
+
+# Zone: nsec-to-nsec3.kasp. (reconfigured)
+set_zone_policy "nsec-to-nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3.kasp. (same)
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dyamic.kasp. (same)
+set_zone_policy "nsec3-dynamic.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-change.kasp. (reconfigured)
+set_zone_policy "nsec3-change.kasp" "nsec3-other"
+set_nsec3param "1" "11" "0"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dynamic-change.kasp. (reconfigured)
+set_zone_policy "nsec3-dynamic-change.kasp" "nsec3-other"
+set_nsec3param "1" "11" "0"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-dynamic-to-inline.kasp. (same)
+set_zone_policy "nsec3-dynamic-to-inline.kasp" "nsec3" 1 3600
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+
+# Zone: nsec3-inline-to-dynamic.kasp. (same)
+set_zone_policy "nsec3-inline-to-dynamic.kasp" "nsec3" 1 3600
+set_nsec3param "0" "5" "8"
+echo_i "initial check zone ${ZONE}"
+check_nsec3
+
+# Zone: nsec3-to-nsec.kasp. (reconfigured)
+set_zone_policy "nsec3-to-nsec.kasp" "nsec"
+set_nsec3param "1" "11" "0"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec
+dnssec_verify
+
+# Zone: nsec3-to-optout.kasp. (reconfigured)
+# DISABLED:
+# There is a bug in the nsec3param building code that thinks when the
+# optout bit is changed, the chain already exists. [GL #2216]
+#set_zone_policy "nsec3-to-optout.kasp" "optout"
+#set_nsec3param "1" "5" "8"
+#echo_i "check zone ${ZONE} after reconfig"
+#check_nsec3
+#dnssec_verify
+
+# Zone: nsec3-from-optout.kasp. (reconfigured)
+# DISABLED:
+# There is a bug in the nsec3param building code that thinks when the
+# optout bit is changed, the chain already exists. [GL #2216]
+#set_zone_policy "nsec3-from-optout.kasp" "nsec3"
+#set_nsec3param "0" "5" "8"
+#echo_i "check zone ${ZONE} after reconfig"
+#check_nsec3
+#dnssec_verify
+
+# Zone: nsec3-other.kasp. (same)
+set_zone_policy "nsec3-other.kasp" "nsec3-other"
+set_nsec3param "1" "11" "0"
+echo_i "check zone ${ZONE} after reconfig"
+check_nsec3
+dnssec_verify
+
+# Using rndc signing -nsec3param (should fail)
+set_zone_policy "nsec3-change.kasp" "nsec3-other"
+echo_i "use rndc signing -nsec3param ${ZONE} to change NSEC3 settings"
+rndccmd $SERVER signing -nsec3param 1 1 12 ffff $ZONE > rndc.signing.test$n.$ZONE || log_error "failed to call rndc signing -nsec3param $ZONE"
+grep "zone uses dnssec-policy, use rndc dnssec command instead" rndc.signing.test$n.$ZONE > /dev/null || log_error "rndc signing -nsec3param should fail"
+check_nsec3
+dnssec_verify
+
+# Test NSEC3 and NSEC3PARAM is the same after restart
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} before restart"
+check_nsec3
+dnssec_verify
+
+# Restart named, NSEC3 should stay the same.
+ret=0
+echo "stop ns3"
+stop_server --use-rndc --port ${CONTROLPORT} ${DIR} || ret=1
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+ret=0
+echo "start ns3"
+start_server --noclean --restart --port ${PORT} ${DIR}
+test "$ret" -eq 0 || echo_i "failed"
+status=$((status+ret))
+
+prevsalt="${SALT}"
+set_zone_policy "nsec3.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+SALT="${prevsalt}"
+echo_i "check zone ${ZONE} after restart has salt ${SALT}"
+check_nsec3
+dnssec_verify
+
+# Zone: nsec3-fails-to-load.kasp. (should be fixed after reload)
+cp ns3/template.db.in ns3/nsec3-fails-to-load.kasp.db
+rndc_reload ns3 10.53.0.3
+
+set_zone_policy "nsec3-fails-to-load.kasp" "nsec3"
+set_nsec3param "0" "5" "8"
+echo_i "check zone ${ZONE} after reload"
+check_nsec3
+dnssec_verify
+
+echo_i "exit status: $status"
+[ $status -eq 0 ] || exit 1