Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 435 insertions, 0 deletions

diff --git a/basegfx/source/polygon/b2dpolygontriangulator.cxx b/basegfx/source/polygon/b2dpolygontriangulator.cxx
new file mode 100644
index 000000000..880b1b5c3
--- /dev/null
+++ b/basegfx/source/polygon/b2dpolygontriangulator.cxx
@@ -0,0 +1,435 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/polygon/b2dpolygontriangulator.hxx>
+#include <basegfx/point/b2dpoint.hxx>
+#include <basegfx/polygon/b2dpolygon.hxx>
+#include <basegfx/polygon/b2dpolypolygon.hxx>
+#include <basegfx/vector/b2dvector.hxx>
+#include <basegfx/polygon/b2dpolygontools.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include <basegfx/range/b2drange.hxx>
+#include <basegfx/numeric/ftools.hxx>
+
+#include <algorithm>
+
+namespace basegfx
+{
+    namespace
+    {
+        class EdgeEntry
+        {
+            EdgeEntry*                              mpNext;
+            B2DPoint                                maStart;
+            B2DPoint                                maEnd;
+            double                                  mfAtan2;
+
+        public:
+            EdgeEntry(const B2DPoint& rStart, const B2DPoint& rEnd)
+            :   mpNext(nullptr),
+                maStart(rStart),
+                maEnd(rEnd),
+                mfAtan2(0.0)
+            {
+                // make sure edge goes down. If horizontal, let it go to the right (left-handed).
+                bool bSwap(false);
+
+                if(::basegfx::fTools::equal(maStart.getY(), maEnd.getY()))
+                {
+                    if(maStart.getX() > maEnd.getX())
+                    {
+                        bSwap = true;
+                    }
+                }
+                else if(maStart.getY() > maEnd.getY())
+                {
+                    bSwap = true;
+                }
+
+                if(bSwap)
+                {
+                    maStart = rEnd;
+                    maEnd = rStart;
+                }
+
+                mfAtan2 = atan2(maEnd.getY() - maStart.getY(), maEnd.getX() - maStart.getX());
+            }
+
+            bool operator<(const EdgeEntry& rComp) const
+            {
+                if(::basegfx::fTools::equal(maStart.getY(), rComp.maStart.getY()))
+                {
+                    if(::basegfx::fTools::equal(maStart.getX(), rComp.maStart.getX()))
+                    {
+                        // same in x and y -> same start point. Sort emitting vectors from left to right.
+                        return (mfAtan2 > rComp.mfAtan2);
+                    }
+
+                    return (maStart.getX() < rComp.maStart.getX());
+                }
+
+                return (maStart.getY() < rComp.maStart.getY());
+            }
+
+            bool operator==(const EdgeEntry& rComp) const
+            {
+                return (maStart.equal(rComp.maStart) && maEnd.equal(rComp.maEnd));
+            }
+
+            bool operator!=(const EdgeEntry& rComp) const
+            {
+                return !(*this == rComp);
+            }
+
+            const B2DPoint& getStart() const { return maStart; }
+            const B2DPoint& getEnd() const { return maEnd; }
+
+            EdgeEntry* getNext() const { return mpNext; }
+            void setNext(EdgeEntry* pNext) { mpNext = pNext; }
+        };
+
+        typedef std::vector< EdgeEntry > EdgeEntries;
+
+        class Triangulator
+        {
+            EdgeEntry*                                      mpList;
+            EdgeEntries                                     maStartEntries;
+            std::vector< std::unique_ptr<EdgeEntry> >       maNewEdgeEntries;
+            triangulator::B2DTriangleVector                 maResult;
+
+            void handleClosingEdge(const B2DPoint& rStart, const B2DPoint& rEnd);
+            bool CheckPointInTriangle(EdgeEntry* pEdgeA, EdgeEntry const * pEdgeB, const B2DPoint& rTestPoint);
+            void createTriangle(const B2DPoint& rA, const B2DPoint& rB, const B2DPoint& rC);
+
+        public:
+            explicit Triangulator(const B2DPolyPolygon& rCandidate);
+
+            const triangulator::B2DTriangleVector& getResult() const { return maResult; }
+        };
+
+        void Triangulator::handleClosingEdge(const B2DPoint& rStart, const B2DPoint& rEnd)
+        {
+            // create an entry, else the comparison might use the wrong edges
+            EdgeEntry aNew(rStart, rEnd);
+            EdgeEntry* pCurr = mpList;
+            EdgeEntry* pPrev = nullptr;
+
+            while(pCurr
+                && pCurr->getStart().getY() <= aNew.getStart().getY()
+                && *pCurr != aNew)
+            {
+                pPrev = pCurr;
+                pCurr = pCurr->getNext();
+            }
+
+            if(pCurr && *pCurr == aNew)
+            {
+                // found closing edge, remove
+                if(pPrev)
+                {
+                    pPrev->setNext(pCurr->getNext());
+                }
+                else
+                {
+                    mpList = pCurr->getNext();
+                }
+            }
+            else
+            {
+                // insert closing edge
+                EdgeEntry* pNew = new EdgeEntry(aNew);
+                maNewEdgeEntries.emplace_back(pNew);
+                pCurr = mpList;
+                pPrev = nullptr;
+
+                while(pCurr && *pCurr < *pNew)
+                {
+                    pPrev = pCurr;
+                    pCurr = pCurr->getNext();
+                }
+
+                if(pPrev)
+                {
+                    pNew->setNext(pPrev->getNext());
+                    pPrev->setNext(pNew);
+                }
+                else
+                {
+                    pNew->setNext(mpList);
+                    mpList = pNew;
+                }
+            }
+        }
+
+        bool Triangulator::CheckPointInTriangle(EdgeEntry* pEdgeA, EdgeEntry const * pEdgeB, const B2DPoint& rTestPoint)
+        {
+            // inside triangle or on edge?
+            if(utils::isPointInTriangle(pEdgeA->getStart(), pEdgeA->getEnd(), pEdgeB->getEnd(), rTestPoint, true))
+            {
+                // but not on point
+                if(!rTestPoint.equal(pEdgeA->getEnd()) && !rTestPoint.equal(pEdgeB->getEnd()))
+                {
+                    // found point in triangle -> split triangle inserting two edges
+                    EdgeEntry* pStart = new EdgeEntry(pEdgeA->getStart(), rTestPoint);
+                    EdgeEntry* pEnd = new EdgeEntry(*pStart);
+                    maNewEdgeEntries.emplace_back(pStart);
+                    maNewEdgeEntries.emplace_back(pEnd);
+
+                    pStart->setNext(pEnd);
+                    pEnd->setNext(pEdgeA->getNext());
+                    pEdgeA->setNext(pStart);
+
+                    return false;
+                }
+            }
+
+            return true;
+        }
+
+        void Triangulator::createTriangle(const B2DPoint& rA, const B2DPoint& rB, const B2DPoint& rC)
+        {
+            maResult.emplace_back(
+                rA,
+                rB,
+                rC);
+        }
+
+        // consume as long as there are edges
+        Triangulator::Triangulator(const B2DPolyPolygon& rCandidate)
+        :   mpList(nullptr)
+        {
+            // add all available edges to the single linked local list which will be sorted
+            // by Y,X,atan2 when adding nodes
+            if(rCandidate.count())
+            {
+                for(sal_uInt32 a(0); a < rCandidate.count(); a++)
+                {
+                    const B2DPolygon& aPolygonCandidate(rCandidate.getB2DPolygon(a));
+                    const sal_uInt32 nCount(aPolygonCandidate.count());
+
+                    if(nCount > 2)
+                    {
+                        B2DPoint aPrevPnt(aPolygonCandidate.getB2DPoint(nCount - 1));
+
+                        for(sal_uInt32 b(0); b < nCount; b++)
+                        {
+                            B2DPoint aNextPnt(aPolygonCandidate.getB2DPoint(b));
+
+                            if( !aPrevPnt.equal(aNextPnt) )
+                            {
+                                maStartEntries.emplace_back(aPrevPnt, aNextPnt);
+                            }
+
+                            aPrevPnt = aNextPnt;
+                        }
+                    }
+                }
+
+                if(!maStartEntries.empty())
+                {
+                    // sort initial list
+                    std::sort(maStartEntries.begin(), maStartEntries.end());
+
+                    // insert to own simply linked list
+                    EdgeEntries::iterator aPos(maStartEntries.begin());
+                    mpList = &(*aPos++);
+                    EdgeEntry* pLast = mpList;
+
+                    while(aPos != maStartEntries.end())
+                    {
+                        EdgeEntry* pEntry = &(*aPos++);
+                        pLast->setNext(pEntry);
+                        pLast = pEntry;
+                    }
+                }
+            }
+
+            while(mpList)
+            {
+                if(mpList->getNext() && mpList->getNext()->getStart().equal(mpList->getStart()))
+                {
+                    // next candidate. There are two edges and start point is equal.
+                    // Length is not zero.
+                    EdgeEntry* pEdgeA = mpList;
+                    EdgeEntry* pEdgeB = pEdgeA->getNext();
+
+                    if( pEdgeA->getEnd().equal(pEdgeB->getEnd()) )
+                    {
+                        // start and end equal -> neutral triangle, delete both
+                        mpList = pEdgeB->getNext();
+                    }
+                    else
+                    {
+                        const B2DVector aLeft(pEdgeA->getEnd() - pEdgeA->getStart());
+                        const B2DVector aRight(pEdgeB->getEnd() - pEdgeA->getStart());
+
+                        if(getOrientation(aLeft, aRight) == B2VectorOrientation::Neutral)
+                        {
+                            // edges are parallel and have different length -> neutral triangle,
+                            // delete both edges and handle closing edge
+                            mpList = pEdgeB->getNext();
+                            handleClosingEdge(pEdgeA->getEnd(), pEdgeB->getEnd());
+                        }
+                        else
+                        {
+                            // not parallel, look for points inside
+                            B2DRange aRange(pEdgeA->getStart(), pEdgeA->getEnd());
+                            aRange.expand(pEdgeB->getEnd());
+                            EdgeEntry* pTestEdge = pEdgeB->getNext();
+                            bool bNoPointInTriangle(true);
+
+                            // look for start point in triangle
+                            while(bNoPointInTriangle && pTestEdge)
+                            {
+                                if(aRange.getMaxY() < pTestEdge->getStart().getY())
+                                {
+                                    // edge is below test range and edges are sorted -> stop looking
+                                    break;
+                                }
+                                else
+                                {
+                                    // do not look for edges with same start point, they are sorted and cannot end inside.
+                                    if(!pTestEdge->getStart().equal(pEdgeA->getStart()))
+                                    {
+                                        if(aRange.isInside(pTestEdge->getStart()))
+                                        {
+                                            bNoPointInTriangle = CheckPointInTriangle(pEdgeA, pEdgeB, pTestEdge->getStart());
+                                        }
+                                    }
+                                }
+
+                                // next candidate
+                                pTestEdge = pTestEdge->getNext();
+                            }
+
+                            if(bNoPointInTriangle)
+                            {
+                                // look for end point in triangle
+                                pTestEdge = pEdgeB->getNext();
+
+                                while(bNoPointInTriangle && pTestEdge)
+                                {
+                                    if(aRange.getMaxY() < pTestEdge->getStart().getY())
+                                    {
+                                        // edge is below test range and edges are sorted -> stop looking
+                                        break;
+                                    }
+                                    else
+                                    {
+                                        // do not look for edges with same end point, they are sorted and cannot end inside.
+                                        if(!pTestEdge->getEnd().equal(pEdgeA->getStart()))
+                                        {
+                                            if(aRange.isInside(pTestEdge->getEnd()))
+                                            {
+                                                bNoPointInTriangle = CheckPointInTriangle(pEdgeA, pEdgeB, pTestEdge->getEnd());
+                                            }
+                                        }
+                                    }
+
+                                    // next candidate
+                                    pTestEdge = pTestEdge->getNext();
+                                }
+                            }
+
+                            if(bNoPointInTriangle)
+                            {
+                                // create triangle, remove edges, handle closing edge
+                                mpList = pEdgeB->getNext();
+                                createTriangle(pEdgeA->getStart(), pEdgeB->getEnd(), pEdgeA->getEnd());
+                                handleClosingEdge(pEdgeA->getEnd(), pEdgeB->getEnd());
+                            }
+                        }
+                    }
+                }
+                else
+                {
+                    // only one entry at start point, delete it
+                    mpList = mpList->getNext();
+                }
+            }
+        }
+
+    } // end of anonymous namespace
+} // end of namespace basegfx
+
+namespace basegfx::triangulator
+{
+        B2DTriangleVector triangulate(const B2DPolygon& rCandidate)
+        {
+            B2DTriangleVector aRetval;
+
+            // subdivide locally (triangulate does not work with beziers), remove double and neutral points
+            B2DPolygon aCandidate(rCandidate.areControlPointsUsed() ? utils::adaptiveSubdivideByAngle(rCandidate) : rCandidate);
+            aCandidate.removeDoublePoints();
+            aCandidate = utils::removeNeutralPoints(aCandidate);
+
+            if(aCandidate.count() == 2)
+            {
+                // candidate IS a triangle, just append
+                aRetval.emplace_back(
+                    aCandidate.getB2DPoint(0),
+                    aCandidate.getB2DPoint(1),
+                    aCandidate.getB2DPoint(2));
+            }
+            else if(aCandidate.count() > 2)
+            {
+                if(utils::isConvex(aCandidate))
+                {
+                    // polygon is convex, just use a triangle fan
+                    utils::addTriangleFan(aCandidate, aRetval);
+                }
+                else
+                {
+                    // polygon is concave.
+                    const B2DPolyPolygon aCandPolyPoly(aCandidate);
+                    Triangulator aTriangulator(aCandPolyPoly);
+
+                    aRetval = aTriangulator.getResult();
+                }
+            }
+
+            return aRetval;
+        }
+
+        B2DTriangleVector triangulate(const B2DPolyPolygon& rCandidate)
+        {
+            B2DTriangleVector aRetval;
+
+            // subdivide locally (triangulate does not work with beziers)
+            B2DPolyPolygon aCandidate(rCandidate.areControlPointsUsed() ? utils::adaptiveSubdivideByAngle(rCandidate) : rCandidate);
+
+            if(aCandidate.count() == 1)
+            {
+                // single polygon -> single polygon triangulation
+                const B2DPolygon& aSinglePolygon(aCandidate.getB2DPolygon(0));
+
+                aRetval = triangulate(aSinglePolygon);
+            }
+            else
+            {
+                Triangulator aTriangulator(aCandidate);
+
+                aRetval = aTriangulator.getResult();
+            }
+
+            return aRetval;
+        }
+} // end of namespace
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */