Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 190 insertions, 0 deletions

diff --git a/include/uno/threadpool.h b/include/uno/threadpool.h
new file mode 100644
index 000000000..52bac0a4a
--- /dev/null
+++ b/include/uno/threadpool.h
@@ -0,0 +1,190 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef INCLUDED_UNO_THREADPOOL_H
+#define INCLUDED_UNO_THREADPOOL_H
+
+#include "cppu/cppudllapi.h"
+#include "sal/types.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***
+ * Thread identifier administration.
+ ***/
+/**
+  Establishes an association between the current thread and the given thread identifier.
+  There can be only one association at a time. The association must be broken by
+  uno_releaseIdFromCurrentThread().
+  This method is in general called by a bridge, that wants to bind a remote threadId
+  to a new thread.
+
+  @param pThreadId a byte sequence, that contains the identifier of the current thread.
+  @return true, when the identifier was registered.
+          false, when the thread has already an identifier. The identifier was not
+          altered. ( This is in general a bug ).
+
+  @see uno_releaseIdFromCurrentThread()
+ */
+CPPU_DLLPUBLIC sal_Bool SAL_CALL uno_bindIdToCurrentThread( sal_Sequence *pThreadId )
+    SAL_THROW_EXTERN_C();
+
+
+/**
+  Get the identifier of the current thread.
+  If no id has been bound for the thread before, a new one is generated and bound
+  to the thread.
+  For each call to uno_getIdOfCurrentThread(), a call to uno_releaseIdFromCurrentThread()
+  must be done.
+
+  @param ppThreadId [out] Contains the (acquired) ThreadId.
+  @see uno_releaseIdFromCurrentThread()
+ */
+CPPU_DLLPUBLIC void SAL_CALL uno_getIdOfCurrentThread( sal_Sequence **ppThreadId )
+    SAL_THROW_EXTERN_C();
+
+
+/**
+  If the internal refcount drops to zero, the association between threadId and
+  thread is broken.
+ */
+CPPU_DLLPUBLIC void SAL_CALL uno_releaseIdFromCurrentThread()
+    SAL_THROW_EXTERN_C();
+
+
+struct _uno_ThreadPool;
+typedef struct _uno_ThreadPool * uno_ThreadPool;
+
+/**
+  Creates a threadpool handle. Typically each remote bridge instances creates one
+  handle.
+ */
+CPPU_DLLPUBLIC uno_ThreadPool SAL_CALL
+uno_threadpool_create() SAL_THROW_EXTERN_C();
+
+
+/**
+  Makes the current thread known to the threadpool. This function must be
+  called, BEFORE uno_threadpool_enter() is called and BEFORE a job for this
+  thread is put into the threadpool (avoid a race between this thread and
+  an incoming request/reply).
+  For every call to uno_threadpool_attach, a corresponding call to
+  uno_threadpool_detach must be done.
+
+  @param hPool The bridge threadpool handle previously created by uno_threadpool_create.
+
+*/
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_attach( uno_ThreadPool hPool ) SAL_THROW_EXTERN_C();
+
+/**
+  This method is called to wait for a reply of a previously sent request. This is a
+  blocking method. uno_threadpool_attach() must have been called before.
+
+  @param hPool the handle that was previously created by uno_threadpool_create().
+  @param ppJob [out] the pointer, that was given by uno_threadpool_putJob
+  0, when uno_threadpool_dispose() was the reason to fall off from threadpool.
+  @see uno_threadpool_dispose()
+ **/
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_enter( uno_ThreadPool hPool , void **ppJob )
+    SAL_THROW_EXTERN_C();
+
+/**
+   Detaches the current thread from the threadpool. Must be called for
+   every call to uno_threadpool_attach.
+  @param hPool the handle that was previously created by uno_threadpool_create().
+*/
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_detach( uno_ThreadPool hPool ) SAL_THROW_EXTERN_C();
+
+/**
+  Puts a job into the pool. A job may either be a request or a reply
+  (replies have a 0 in the doRequest parameter). This function is non-blocking.
+
+  A request may either be synchronous or asynchronous.
+  If the request is synchronous, it is first looked up,
+  if there exists a handle with the given
+  identifier. If this is the case, the thread is woken up and the doRequest
+  function is called with the given pJob. If no handle exists,
+  a new thread is created and the given threadId is bound to the new thread.
+
+  If the request is asynchronous, it is put into the queue of asynchronous
+  requests for the current threadid. The requests are always executed in a new
+  thread, even if the thread with the given id is waiting in the pool. No id is bound
+  to the newly created thread. The responsibility is left to the bridge (if it
+  wishes to bind a name).
+
+  If pJob is a reply, there MUST be a thread with the given threadId waiting
+  for this reply.
+
+  @param hPool the handle that was previously created by uno_threadpool_create().
+  @param pThreadId The Id of the thread, that initialized this request. (In general a
+                   remote threadid).
+  @param pJob The argument, that doRequest will get or that will be returned by
+                   uno_threadpool_enter().
+  @param doRequest The function, that shall be called to execute the request.
+                   0 if pJob is a reply.
+  @param bIsOneway True, if the request is asynchronous. False, if it is synchronous.
+                   Set to sal_False, if pJob is a reply.
+ */
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_putJob(
+    uno_ThreadPool hPool,
+    sal_Sequence *pThreadId,
+    void *pJob,
+    void ( SAL_CALL * doRequest ) ( void *pThreadSpecificData ),
+    sal_Bool bIsOneway ) SAL_THROW_EXTERN_C();
+
+/**
+  All threads, that are waiting on the hPool handle, are forced out of the pool.
+  The threads waiting with uno_threadpool_enter() will return with *ppJob == 0
+
+  Later calls to uno_threadpool_enter() using the hPool handle will also
+  return immediately with *ppJob == 0.
+
+  @param hPool The handle to be disposed.
+
+  This function is called i.e. by a bridge, that is forced to dispose itself.
+ */
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_dispose( uno_ThreadPool hPool ) SAL_THROW_EXTERN_C();
+
+
+/** Releases the previously with uno_threadpool_create() created handle.
+    The handle thus becomes invalid. It is an error to use the handle after
+    uno_threadpool_destroy().
+
+    A call to uno_threadpool_destroy can synchronously join on spawned worker
+    threads, so this function must never be called from such a worker thread.
+
+    @see uno_threadpool_create()
+ */
+CPPU_DLLPUBLIC void SAL_CALL
+uno_threadpool_destroy( uno_ThreadPool hPool ) SAL_THROW_EXTERN_C();
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // INCLUDED_UNO_THREADPOOL_H
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */