Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1264 insertions, 0 deletions

diff --git a/solenv/bin/modules/installer/windows/msp.pm b/solenv/bin/modules/installer/windows/msp.pm
new file mode 100644
index 000000000..1bbeea8d2
--- /dev/null
+++ b/solenv/bin/modules/installer/windows/msp.pm
@@ -0,0 +1,1264 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+#   Licensed to the Apache Software Foundation (ASF) under one or more
+#   contributor license agreements. See the NOTICE file distributed
+#   with this work for additional information regarding copyright
+#   ownership. The ASF licenses this file to you under the Apache
+#   License, Version 2.0 (the "License"); you may not use this file
+#   except in compliance with the License. You may obtain a copy of
+#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+package installer::windows::msp;
+
+use File::Copy;
+use installer::control;
+use installer::converter;
+use installer::exiter;
+use installer::files;
+use installer::globals;
+use installer::logger;
+use installer::pathanalyzer;
+use installer::systemactions;
+use installer::windows::admin;
+use installer::windows::idtglobal;
+use installer::windows::update;
+
+#################################################################################
+# Making all required administrative installations
+#################################################################################
+
+sub install_installation_sets
+{
+    my ($installationdir) = @_;
+
+    # Finding the msi database in the new installation set, that is located in $installationdir
+
+    my $msifiles = installer::systemactions::find_file_with_file_extension("msi", $installationdir);
+
+    if ( $#{$msifiles} < 0 ) { installer::exiter::exit_program("ERROR: Did not find msi database in directory $installationdir", "create_msp_patch"); }
+    if ( $#{$msifiles} > 0 ) { installer::exiter::exit_program("ERROR: Did find more than one msi database in directory $installationdir", "create_msp_patch"); }
+
+    my $newinstallsetdatabasepath = $installationdir . $installer::globals::separator . ${$msifiles}[0];
+    my $oldinstallsetdatabasepath = $installer::globals::updatedatabasepath;
+
+    # Creating temp directory again
+    installer::systemactions::create_directory_structure($installer::globals::temppath);
+
+    # Creating old installation directory
+    my $dirname = "admin";
+    my $installpath = $installer::globals::temppath . $installer::globals::separator . $dirname;
+    if ( ! -d $installpath) { installer::systemactions::create_directory($installpath); }
+
+    my $oldinstallpath = $installpath . $installer::globals::separator . "old";
+    my $newinstallpath = $installpath . $installer::globals::separator . "new";
+
+    if ( ! -d $oldinstallpath) { installer::systemactions::create_directory($oldinstallpath); }
+    if ( ! -d $newinstallpath) { installer::systemactions::create_directory($newinstallpath); }
+
+    my $olddatabase = installer::windows::admin::make_admin_install($oldinstallsetdatabasepath, $oldinstallpath);
+    my $newdatabase = installer::windows::admin::make_admin_install($newinstallsetdatabasepath, $newinstallpath);
+
+    if ( $^O =~ /cygwin/i ) {
+        $olddatabase = qx{cygpath -w "$olddatabase"};
+        $olddatabase =~ s/\s*$//g;
+        $newdatabase = qx{cygpath -w "$newdatabase"};
+        $newdatabase =~ s/\s*$//g;
+    }
+
+    return ($olddatabase, $newdatabase);
+}
+
+#################################################################################
+# Extracting all tables from a pcp file
+#################################################################################
+
+sub extract_all_tables_from_pcpfile
+{
+    my ($fullpcpfilepath, $workdir) = @_;
+
+    my $msidb = "msidb.exe";    # Has to be in the path
+    my $infoline = "";
+    my $systemcall = "";
+    my $returnvalue = "";
+    my $extraslash = "";        # Has to be set for non-ActiveState perl
+
+    my $localfullpcpfile = $fullpcpfilepath;
+    my $localworkdir = $workdir;
+
+    if ( $^O =~ /cygwin/i ) {
+        # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+        $localfullpcpfile =~ s/\//\\\\/g;
+        $localworkdir =~ s/\//\\\\/g;
+        $extraslash = "\\";
+    }
+    if ( $^O =~ /linux/i ) {
+        $extraslash = "\\";
+    }
+
+    # Export of all tables by using "*"
+
+    $systemcall = $msidb . " -d " . $localfullpcpfile . " -f " . $localworkdir . " -e " . $extraslash . "*";
+    $returnvalue = system($systemcall);
+
+    $infoline = "Systemcall: $systemcall\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    if ($returnvalue)
+    {
+        $infoline = "ERROR: Could not execute $systemcall !\n";
+        push( @installer::globals::logfileinfo, $infoline);
+        installer::exiter::exit_program("ERROR: Could not exclude tables from pcp file: $fullpcpfilepath !", "extract_all_tables_from_msidatabase");
+    }
+    else
+    {
+        $infoline = "Success: Executed $systemcall successfully!\n";
+        push( @installer::globals::logfileinfo, $infoline);
+    }
+}
+
+#################################################################################
+# Include tables into a pcp file
+#################################################################################
+
+sub include_tables_into_pcpfile
+{
+    my ($fullpcpfilepath, $workdir, $tables) = @_;
+
+    my $msidb = "msidb.exe";    # Has to be in the path
+    my $infoline = "";
+    my $systemcall = "";
+    my $returnvalue = "";
+
+    # Make all table 8+3 conform
+    my $alltables = installer::converter::convert_stringlist_into_array(\$tables, " ");
+
+    for ( my $i = 0; $i <= $#{$alltables}; $i++ )
+    {
+        my $tablename = ${$alltables}[$i];
+        $tablename =~ s/\s*$//;
+        my $namelength = length($tablename);
+        if ( $namelength > 8 )
+        {
+            my $newtablename = substr($tablename, 0, 8);    # name, offset, length
+            my $oldfile = $workdir . $installer::globals::separator . $tablename . ".idt";
+            my $newfile = $workdir . $installer::globals::separator . $newtablename . ".idt";
+            if ( -f $newfile ) { unlink $newfile; }
+            installer::systemactions::copy_one_file($oldfile, $newfile);
+        }
+    }
+
+    # Import of tables
+
+    my $localworkdir = $workdir;
+    my $localfullpcpfilepath = $fullpcpfilepath;
+
+    if ( $^O =~ /cygwin/i ) {
+        # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+        $localfullpcpfilepath =~ s/\//\\\\/g;
+        $localworkdir =~ s/\//\\\\/g;
+    }
+
+    my @tables = split(' ', $tables); # I found that msidb from Windows SDK 7.1 did not accept more than one table.
+    foreach my $table (@tables)
+    {
+        $systemcall = $msidb . " -d " . $localfullpcpfilepath . " -f " . $localworkdir . " -i " . $table;
+
+        $returnvalue = system($systemcall);
+
+        $infoline = "Systemcall: $systemcall\n";
+        push( @installer::globals::logfileinfo, $infoline);
+
+        if ($returnvalue)
+        {
+            $infoline = "ERROR: Could not execute $systemcall !\n";
+            push( @installer::globals::logfileinfo, $infoline);
+            installer::exiter::exit_program("ERROR: Could not include tables into pcp file: $fullpcpfilepath !", "include_tables_into_pcpfile");
+        }
+        else
+        {
+            $infoline = "Success: Executed $systemcall successfully!\n";
+            push( @installer::globals::logfileinfo, $infoline);
+        }
+    }
+}
+
+#################################################################################
+# Calling msimsp.exe
+#################################################################################
+
+sub execute_msimsp
+{
+    my ($fullpcpfilename, $mspfilename, $localmspdir) = @_;
+
+    my $msimsp = "msimsp.exe";  # Has to be in the path
+    my $infoline = "";
+    my $systemcall = "";
+    my $returnvalue = "";
+    my $logfilename = $localmspdir . $installer::globals::separator . "msimsp.log";
+
+    # Using a specific temp for each msimsp.exe process
+    # Creating temp directory again (should already have happened)
+    installer::systemactions::create_directory_structure($installer::globals::temppath);
+
+    # Creating old installation directory
+    my $dirname = "msimsptemp";
+    my $msimsptemppath = $installer::globals::temppath . $installer::globals::separator . $dirname;
+    if ( ! -d $msimsptemppath) { installer::systemactions::create_directory($msimsptemppath); }
+
+    # r:\msvc9p\PlatformSDK\v6.1\bin\msimsp.exe -s c:\patch\hotfix_qfe1.pcp -p c:\patch\patch_ooo3_m2_m3.msp -l c:\patch\patch_ooo3_m2_m3.log
+
+    if ( -f $logfilename ) { unlink $logfilename; }
+
+    my $localfullpcpfilename = $fullpcpfilename;
+    my $localmspfilename = $mspfilename;
+    my $locallogfilename = $logfilename;
+    my $localmsimsptemppath = $msimsptemppath;
+
+    if ( $^O =~ /cygwin/i ) {
+        # msimsp.exe really wants backslashes. (And double escaping because system() expands the string.)
+        $localfullpcpfilename =~ s/\//\\\\/g;
+        $locallogfilename =~ s/\//\\\\/g;
+
+        $localmspfilename =~ s/\\/\\\\/g; # path already contains backslash
+
+        $localmsimsptemppath = qx{cygpath -w "$localmsimsptemppath"};
+        $localmsimsptemppath =~ s/\\/\\\\/g;
+        $localmsimsptemppath =~ s/\s*$//g;
+    }
+
+    $systemcall = $msimsp . " -s " . $localfullpcpfilename . " -p " . $localmspfilename . " -l " . $locallogfilename . " -f " . $localmsimsptemppath;
+    installer::logger::print_message( "... $systemcall ...\n" );
+
+    $returnvalue = system($systemcall);
+
+    $infoline = "Systemcall: $systemcall\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    if ($returnvalue)
+    {
+        $infoline = "ERROR: Could not execute $systemcall !\n";
+        push( @installer::globals::logfileinfo, $infoline);
+        installer::exiter::exit_program("ERROR: Could not execute $systemcall !", "execute_msimsp");
+    }
+    else
+    {
+        $infoline = "Success: Executed $systemcall successfully!\n";
+        push( @installer::globals::logfileinfo, $infoline);
+    }
+
+    return $logfilename;
+}
+
+####################################################################
+# Checking existence and saving all tables, that need to be edited
+####################################################################
+
+sub check_and_save_tables
+{
+    my ($tablelist, $workdir) = @_;
+
+    my $tables = installer::converter::convert_stringlist_into_array(\$tablelist, " ");
+
+    for ( my $i = 0; $i <= $#{$tables}; $i++ )
+    {
+        my $filename = ${$tables}[$i];
+        $filename =~ s/\s*$//;
+        my $fullfilename = $workdir . $installer::globals::separator . $filename . ".idt";
+
+        if ( ! -f $fullfilename ) { installer::exiter::exit_program("ERROR: Required idt file could not be found: \"$fullfilename\"!", "check_and_save_tables"); }
+
+        my $savfilename = $fullfilename . ".sav";
+        installer::systemactions::copy_one_file($fullfilename, $savfilename);
+    }
+}
+
+####################################################################
+# Setting the name of the msp database
+####################################################################
+
+sub set_mspfilename
+{
+    my ($allvariables, $mspdir, $languagesarrayref) = @_;
+
+    my $databasename = $allvariables->{'PRODUCTNAME'} . "-" . $allvariables->{'PRODUCTVERSION'} . "-" . $allvariables->{'WINDOWSPATCHLEVEL'} . ".msp";
+
+    my $fullmspname = $mspdir . $installer::globals::separator . $databasename;
+
+    if ( $^O =~ /cygwin/i ) { $fullmspname =~ s/\//\\/g; }
+
+    return $fullmspname;
+}
+
+####################################################################
+# Editing table Properties
+####################################################################
+
+sub change_properties_table
+{
+    my ($localmspdir, $mspfilename) = @_;
+
+    my $infoline = "Changing content of table \"Properties\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "Properties.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_properties_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+
+
+    my $guidref = installer::windows::msiglobal::get_guid_list(1, 1);
+    ${$guidref}[0] =~ s/\s*$//;     # removing ending spaces
+    my $patchcode = "\{" . ${$guidref}[0] . "\}";
+
+    # Setting "PatchOutputPath"
+    my $found_patchoutputpath = 0;
+    my $found_patchguid = 0;
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        if ( ${$filecontent}[$i] =~ /^\s*PatchOutputPath\t(.*?)\s*$/ )
+        {
+            my $oldvalue = $1;
+            ${$filecontent}[$i] =~ s/\Q$oldvalue\E/$mspfilename/;
+            $found_patchoutputpath = 1;
+        }
+
+        if ( ${$filecontent}[$i] =~ /^\s*PatchGUID\t(.*?)\s*$/ )
+        {
+            my $oldvalue = $1;
+            ${$filecontent}[$i] =~ s/\Q$oldvalue\E/$patchcode/;
+            $found_patchguid = 1;
+        }
+    }
+
+    if ( ! $found_patchoutputpath )
+    {
+        my $newline = "PatchOutputPath\t$mspfilename\n";
+        push(@{$filecontent}, $newline);
+    }
+
+    if ( ! $found_patchguid )
+    {
+        my $newline = "PatchGUID\t$patchcode\n";
+        push(@{$filecontent}, $newline);
+    }
+
+    # saving file
+    installer::files::save_file($filename, $filecontent);
+}
+
+####################################################################
+# Editing table TargetImages
+####################################################################
+
+sub change_targetimages_table
+{
+    my ($localmspdir, $olddatabase) = @_;
+
+    my $infoline = "Changing content of table \"TargetImages\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "TargetImages.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_targetimages_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+    my @newcontent = ();
+
+    # Copying the header
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) { if ( $i < 3 ) { push(@newcontent, ${$filecontent}[$i]); } }
+
+    #Adding all targets
+    my $newline = "T1\t$olddatabase\t\tU1\t1\t0x00000922\t1\n";
+    push(@newcontent, $newline);
+
+    # saving file
+    installer::files::save_file($filename, \@newcontent);
+}
+
+####################################################################
+# Editing table UpgradedImages
+####################################################################
+
+sub change_upgradedimages_table
+{
+    my ($localmspdir, $newdatabase) = @_;
+
+    my $infoline = "Changing content of table \"UpgradedImages\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "UpgradedImages.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_upgradedimages_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+    my @newcontent = ();
+
+    # Copying the header
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) { if ( $i < 3 ) { push(@newcontent, ${$filecontent}[$i]); } }
+
+    # Syntax: Upgraded MsiPath PatchMsiPath SymbolPaths Family
+
+    # default values
+    my $upgraded = "U1";
+    my $msipath = $newdatabase;
+    my $patchmsipath = "";
+    my $symbolpaths = "";
+    my $family = "22334455";
+
+    if ( $#{$filecontent} >= 3 )
+    {
+        my $line = ${$filecontent}[3];
+        if ( $line =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            $upgraded = $1;
+            $patchmsipath = $3;
+            $symbolpaths = $4;
+            $family = $5;
+        }
+    }
+
+    #Adding sequence line, saving PatchFamily
+    my $newline = "$upgraded\t$msipath\t$patchmsipath\t$symbolpaths\t$family\n";
+    push(@newcontent, $newline);
+
+    # saving file
+    installer::files::save_file($filename, \@newcontent);
+}
+
+####################################################################
+# Editing table ImageFamilies
+####################################################################
+
+sub change_imagefamilies_table
+{
+    my ($localmspdir) = @_;
+
+    my $infoline = "Changing content of table \"ImageFamilies\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "ImageFamilies.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_imagefamilies_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+    my @newcontent = ();
+
+    # Copying the header
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) { if ( $i < 3 ) { push(@newcontent, ${$filecontent}[$i]); } }
+
+    # Syntax: Family MediaSrcPropName MediaDiskId FileSequenceStart DiskPrompt VolumeLabel
+    # "FileSequenceStart has to be set
+
+    # Default values:
+
+    my $family = "22334455";
+    my $mediasrcpropname = "MediaSrcPropName";
+    my $mediadiskid = "2";
+    my $filesequencestart = get_filesequencestart();
+    my $diskprompt = "";
+    my $volumelabel = "";
+
+    if ( $#{$filecontent} >= 3 )
+    {
+        my $line = ${$filecontent}[3];
+        if ( $line =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            $family = $1;
+            $mediasrcpropname = $2;
+            $mediadiskid = $3;
+            $diskprompt = $5;
+            $volumelabel = $6;
+        }
+    }
+
+    #Adding sequence line
+    my $newline = "$family\t$mediasrcpropname\t$mediadiskid\t$filesequencestart\t$diskprompt\t$volumelabel\n";
+    push(@newcontent, $newline);
+
+    # saving file
+    installer::files::save_file($filename, \@newcontent);
+}
+
+####################################################################
+# Setting start sequence for patch
+####################################################################
+
+sub get_filesequencestart
+{
+    my $sequence = 1000;  # default
+
+    if ( $installer::globals::updatelastsequence ) { $sequence = $installer::globals::updatelastsequence + 500; }
+
+    return $sequence;
+}
+
+####################################################################
+# Setting time value into pcp file
+# Format mm/dd/yyyy hh:mm
+####################################################################
+
+sub get_patchtime_value
+{
+    # Syntax: 8/8/2008 11:55
+    my $minute = (localtime())[1];
+    my $hour = (localtime())[2];
+    my $day = (localtime())[3];
+    my $month = (localtime())[4];
+    my $year = 1900 + (localtime())[5];
+
+    $month++; # zero based month
+    if ( $minute  < 10 ) { $minute = "0" . $minute; }
+    if ( $hour  < 10 ) { $hour = "0" . $hour; }
+
+    my $timestring = $month . "/" . $day . "/" . $year . " " . $hour . ":" . $minute;
+
+    return $timestring;
+}
+
+#################################################################################
+# Checking, if this is the correct database.
+#################################################################################
+
+sub correct_langs
+{
+    my ($langs, $languagestringref) = @_;
+
+    my $correct_langs = 0;
+
+    # Comparing $langs with $languagestringref
+
+    my $langlisthash = installer::converter::convert_stringlist_into_hash(\$langs, ",");
+    my $langstringhash = installer::converter::convert_stringlist_into_hash($languagestringref, "_");
+
+    my $not_included = 0;
+    foreach my $onelang ( keys %{$langlisthash} )
+    {
+        if ( ! exists($langstringhash->{$onelang}) )
+        {
+            $not_included = 1;
+            last;
+        }
+    }
+
+    if ( ! $not_included )
+    {
+        foreach my $onelanguage ( keys %{$langstringhash} )
+        {
+            if ( ! exists($langlisthash->{$onelanguage}) )
+            {
+                $not_included = 1;
+                last;
+            }
+        }
+
+        if ( ! $not_included ) { $correct_langs = 1; }
+    }
+
+    return $correct_langs;
+}
+
+#################################################################################
+# Searching for the path to the reference database for this special product.
+#################################################################################
+
+sub get_patchid_from_list
+{
+    my ($filecontent, $languagestringref, $filename) = @_;
+
+    my $patchid = "";
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        my $line = ${$filecontent}[$i];
+        if ( $line =~ /^\s*$/ ) { next; } # empty line
+        if ( $line =~ /^\s*\#/ ) { next; } # comment line
+
+        if ( $line =~ /^\s*(.+?)\s*=\s*(.+?)\s*$/ )
+        {
+            my $langs = $1;
+            my $localpatchid = $2;
+
+            if ( correct_langs($langs, $languagestringref) )
+            {
+                $patchid = $localpatchid;
+                last;
+            }
+        }
+        else
+        {
+            installer::exiter::exit_program("ERROR: Wrong syntax in file: $filename! Line: \"$line\"", "get_patchid_from_list");
+        }
+    }
+
+    return $patchid;
+}
+
+####################################################################
+# Editing table PatchMetadata
+####################################################################
+
+sub change_patchmetadata_table
+{
+    my ($localmspdir, $allvariables, $languagestringref) = @_;
+
+    my $infoline = "Changing content of table \"PatchMetadata\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "PatchMetadata.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_patchmetadata_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+    my @newcontent = ();
+
+    # Syntax: Company Property Value
+    # Interesting properties: "Classification" and "CreationTimeUTC"
+
+    my $classification_set = 0;
+    my $creationtime_set = 0;
+    my $targetproductname_set = 0;
+    my $manufacturer_set = 0;
+    my $displayname_set = 0;
+    my $description_set = 0;
+    my $allowremoval_set = 0;
+
+    my $defaultcompany = "";
+
+    my $classificationstring = "Classification";
+    my $classificationvalue = "Hotfix";
+    if (( $allvariables->{'SERVICEPACK'} ) && ( $allvariables->{'SERVICEPACK'} == 1 )) { $classificationvalue = "ServicePack"; }
+
+    my $allowremovalstring = "AllowRemoval";
+    my $allowremovalvalue = "1";
+    if (( exists($allvariables->{'MSPALLOWREMOVAL'}) ) && ( $allvariables->{'MSPALLOWREMOVAL'} == 0 )) { $allowremovalvalue = 0; }
+
+    my $timestring = "CreationTimeUTC";
+    # Syntax: 8/8/2008 11:55
+    my $timevalue = get_patchtime_value();
+
+    my $targetproductnamestring = "TargetProductName";
+    my $targetproductnamevalue = $allvariables->{'PRODUCTNAME'};
+    if ( $allvariables->{'PROPERTYTABLEPRODUCTNAME'} ) { $targetproductnamevalue = $allvariables->{'PROPERTYTABLEPRODUCTNAME'}; }
+
+    my $manufacturerstring = "ManufacturerName";
+    my $manufacturervalue = $ENV{'OOO_VENDOR'};
+    if ( $installer::globals::longmanufacturer ) { $manufacturervalue = $installer::globals::longmanufacturer; }
+
+    my $displaynamestring = "DisplayName";
+    my $descriptionstring = "Description";
+    my $displaynamevalue = "";
+    my $descriptionvalue = "";
+
+    my $base = $allvariables->{'PRODUCTNAME'} . " " . $allvariables->{'PRODUCTVERSION'};
+    if ( $installer::globals::languagepack || $installer::globals::helppack ) { $base = $targetproductnamevalue; }
+
+    my $windowspatchlevel = 0;
+    if ( $allvariables->{'WINDOWSPATCHLEVEL'} ) { $windowspatchlevel = $allvariables->{'WINDOWSPATCHLEVEL'}; }
+
+    my $displayaddon = "";
+    if ( $allvariables->{'PATCHDISPLAYADDON'} ) { $displayaddon = $allvariables->{'PATCHDISPLAYADDON'}; }
+
+    my $patchsequence = get_patchsequence($allvariables);
+
+    if (( $allvariables->{'SERVICEPACK'} ) && ( $allvariables->{'SERVICEPACK'} == 1 ))
+    {
+        $displaynamevalue = $base . " ServicePack " . $windowspatchlevel . " " . $patchsequence . " Build: " . $installer::globals::buildid;
+        $descriptionvalue = $base . " ServicePack " . $windowspatchlevel . " " . $patchsequence . " Build: " . $installer::globals::buildid;
+    }
+    else
+    {
+        $displaynamevalue = $base . " Hotfix " . $displayaddon . " " . $patchsequence . " Build: " . $installer::globals::buildid;
+        $descriptionvalue = $base . " Hotfix " . $displayaddon . " " . $patchsequence . " Build: " . $installer::globals::buildid;
+        $displaynamevalue =~ s/    / /g;
+        $descriptionvalue =~ s/    / /g;
+        $displaynamevalue =~ s/   / /g;
+        $descriptionvalue =~ s/   / /g;
+        $displaynamevalue =~ s/  / /g;
+        $descriptionvalue =~ s/  / /g;
+    }
+
+    if ( $allvariables->{'MSPPATCHNAMELIST'} )
+    {
+        my $patchnamelistfile = $allvariables->{'MSPPATCHNAMELIST'};
+        $patchnamelistfile = $installer::globals::idttemplatepath  . $installer::globals::separator . $patchnamelistfile;
+        if ( ! -f $patchnamelistfile ) { installer::exiter::exit_program("ERROR: Could not find file \"$patchnamelistfile\".", "change_patchmetadata_table"); }
+        my $filecontent = installer::files::read_file($patchnamelistfile);
+
+        # Get name and path of reference database
+        my $patchid = get_patchid_from_list($filecontent, $languagestringref, $patchnamelistfile);
+
+        if ( $patchid eq "" ) { installer::exiter::exit_program("ERROR: Could not find file patchid in file \"$patchnamelistfile\" for language(s) \"$$languagestringref\".", "change_patchmetadata_table"); }
+
+        # Setting language specific patch id
+    }
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\s*$/ )
+        {
+            my $company = $1;
+            my $property = $2;
+            my $value = $3;
+
+            if ( $property eq $classificationstring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$classificationvalue\n";
+                $classification_set = 1;
+            }
+
+            if ( $property eq $allowremovalstring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$allowremovalvalue\n";
+                $allowremoval_set = 1;
+            }
+
+            if ( $property eq $timestring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$timevalue\n";
+                $creationtime_set = 1;
+            }
+
+            if ( $property eq $targetproductnamestring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$targetproductnamevalue\n";
+                $targetproductname_set = 1;
+            }
+
+            if ( $property eq $manufacturerstring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$manufacturervalue\n";
+                $manufacturer_set = 1;
+            }
+
+            if ( $property eq $displaynamestring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$displaynamevalue\n";
+                $displayname_set = 1;
+            }
+
+            if ( $property eq $descriptionstring )
+            {
+                ${$filecontent}[$i] = "$company\t$property\t$descriptionvalue\n";
+                $description_set = 1;
+            }
+        }
+
+        push(@newcontent, ${$filecontent}[$i]);
+    }
+
+    if ( ! $classification_set )
+    {
+        my $line = "$defaultcompany\t$classificationstring\t$classificationvalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $allowremoval_set )
+    {
+        my $line = "$defaultcompany\t$classificationstring\t$allowremovalvalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $allowremoval_set )
+    {
+        my $line = "$defaultcompany\t$classificationstring\t$allowremovalvalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $creationtime_set )
+    {
+        my $line = "$defaultcompany\t$timestring\t$timevalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $targetproductname_set )
+    {
+        my $line = "$defaultcompany\t$targetproductnamestring\t$targetproductnamevalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $manufacturer_set )
+    {
+        my $line = "$defaultcompany\t$manufacturerstring\t$manufacturervalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $displayname_set )
+    {
+        my $line = "$defaultcompany\t$displaynamestring\t$displaynamevalue\n";
+        push(@newcontent, $line);
+    }
+
+    if ( ! $description_set )
+    {
+        my $line = "$defaultcompany\t$descriptionstring\t$descriptionvalue\n";
+        push(@newcontent, $line);
+    }
+
+    # saving file
+    installer::files::save_file($filename, \@newcontent);
+}
+
+####################################################################
+# Editing table PatchSequence
+####################################################################
+
+sub change_patchsequence_table
+{
+    my ($localmspdir, $allvariables) = @_;
+
+    my $infoline = "Changing content of table \"PatchSequence\"\n";
+    push( @installer::globals::logfileinfo, $infoline);
+
+    my $filename = $localmspdir . $installer::globals::separator . "PatchSequence.idt";
+    if ( ! -f $filename ) { installer::exiter::exit_program("ERROR: Could not find file \"$filename\" !", "change_patchsequence_table"); }
+
+    my $filecontent = installer::files::read_file($filename);
+    my @newcontent = ();
+
+    # Copying the header
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ ) { if ( $i < 3 ) { push(@newcontent, ${$filecontent}[$i]); } }
+
+    # Syntax: PatchFamily Target Sequence Supersede
+
+    my $patchfamily = "SO";
+    my $target = "";
+    my $patchsequence = get_patchsequence($allvariables);
+    my $supersede = get_supersede($allvariables);
+
+    if ( $#{$filecontent} >= 3 )
+    {
+        my $line = ${$filecontent}[3];
+        if ( $line =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\s$/ )
+        {
+            $patchfamily = $1;
+            $target = $2;
+        }
+    }
+
+    #Adding sequence line, saving PatchFamily
+    my $newline = "$patchfamily\t$target\t$patchsequence\t$supersede\n";
+    push(@newcontent, $newline);
+
+    # saving file
+    installer::files::save_file($filename, \@newcontent);
+}
+
+####################################################################
+# Setting supersede, "0" for Hotfixes, "1" for ServicePack
+####################################################################
+
+sub get_supersede
+{
+    my ( $allvariables ) = @_;
+
+    my $supersede = 0;  # if not defined, this is a Hotfix
+
+    if (( $allvariables->{'SERVICEPACK'} ) && ( $allvariables->{'SERVICEPACK'} == 1 )) { $supersede = 1; }
+
+    return $supersede;
+}
+
+####################################################################
+# Setting the sequence of the patch
+####################################################################
+
+sub get_patchsequence
+{
+    my ( $allvariables ) = @_;
+
+    my $patchsequence = "1.0";
+
+    if ( ! $allvariables->{'PACKAGEVERSION'} ) { installer::exiter::exit_program("ERROR: PACKAGEVERSION must be set for msp patch creation!", "get_patchsequence"); }
+
+    my $packageversion = $allvariables->{'PACKAGEVERSION'};
+
+    if ( $packageversion =~ /^\s*(\d+)\.(\d+)\.(\d+)\.(\d+)\s*$/ )
+    {
+        my $major = $1;
+        my $minor = $2;
+        my $micro = $3;
+        my $patch = $4;
+        $patchsequence = $major . "\." . $minor . "\." . $micro . "\." . $patch;
+    }
+
+    return $patchsequence;
+}
+
+####################################################################
+# Editing all tables from pcp file, that need to be edited
+####################################################################
+
+sub edit_tables
+{
+    my ($tablelist, $localmspdir, $olddatabase, $newdatabase, $mspfilename, $allvariables, $languagestringref) = @_;
+
+    # table list contains:  my $tablelist = "Properties TargetImages UpgradedImages ImageFamilies PatchMetadata PatchSequence";
+
+    change_properties_table($localmspdir, $mspfilename);
+    change_targetimages_table($localmspdir, $olddatabase);
+    change_upgradedimages_table($localmspdir, $newdatabase);
+    change_imagefamilies_table($localmspdir);
+    change_patchmetadata_table($localmspdir, $allvariables, $languagestringref);
+    change_patchsequence_table($localmspdir, $allvariables);
+}
+
+#################################################################################
+# Checking, if this is the correct database.
+#################################################################################
+
+sub correct_patch
+{
+    my ($product, $pro, $langs, $languagestringref) = @_;
+
+    my $correct_patch = 0;
+
+    # Comparing $product with $installer::globals::product and
+    # $pro with $installer::globals::pro and
+    # $langs with $languagestringref
+
+    my $product_is_good = 0;
+
+    my $localproduct = $installer::globals::product;
+    if ( $installer::globals::languagepack ) { $localproduct = $localproduct . "LanguagePack"; }
+    elsif ( $installer::globals::helppack ) { $localproduct = $localproduct . "HelpPack"; }
+
+    if ( $product eq $localproduct ) { $product_is_good = 1; }
+
+    if ( $product_is_good )
+    {
+        my $pro_is_good = 0;
+
+        if ((( $pro eq "pro" ) && ( $installer::globals::pro )) || (( $pro eq "nonpro" ) && ( ! $installer::globals::pro ))) { $pro_is_good = 1; }
+
+        if ( $pro_is_good )
+        {
+            my $langlisthash = installer::converter::convert_stringlist_into_hash(\$langs, ",");
+            my $langstringhash = installer::converter::convert_stringlist_into_hash($languagestringref, "_");
+
+            my $not_included = 0;
+            foreach my $onelang ( keys %{$langlisthash} )
+            {
+                if ( ! exists($langstringhash->{$onelang}) )
+                {
+                    $not_included = 1;
+                    last;
+                }
+            }
+
+            if ( ! $not_included )
+            {
+                foreach my $onelanguage ( keys %{$langstringhash} )
+                {
+                    if ( ! exists($langlisthash->{$onelanguage}) )
+                    {
+                        $not_included = 1;
+                        last;
+                    }
+                }
+
+                if ( ! $not_included ) { $correct_patch = 1; }
+            }
+        }
+    }
+
+    return $correct_patch;
+}
+
+#################################################################################
+# Searching for the path to the required patch for this special product.
+#################################################################################
+
+sub get_requiredpatchfile_from_list
+{
+    my ($filecontent, $languagestringref, $filename) = @_;
+
+    my $patchpath = "";
+
+    for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+    {
+        my $line = ${$filecontent}[$i];
+        if ( $line =~ /^\s*$/ ) { next; } # empty line
+        if ( $line =~ /^\s*\#/ ) { next; } # comment line
+
+        if ( $line =~ /^\s*(.+?)\s*\t+\s*(.+?)\s*\t+\s*(.+?)\s*\t+\s*(.+?)\s*$/ )
+        {
+            my $product = $1;
+            my $pro = $2;
+            my $langs = $3;
+            my $path = $4;
+
+            if (( $pro ne "pro" ) && ( $pro ne "nonpro" )) { installer::exiter::exit_program("ERROR: Wrong syntax in file: $filename. Only \"pro\" or \"nonpro\" allowed in column 1! Line: \"$line\"", "get_databasename_from_list"); }
+
+            if ( correct_patch($product, $pro, $langs, $languagestringref) )
+            {
+                $patchpath = $path;
+                last;
+            }
+        }
+        else
+        {
+            installer::exiter::exit_program("ERROR: Wrong syntax in file: $filename! Line: \"$line\"", "get_requiredpatchfile_from_list");
+        }
+    }
+
+    return $patchpath;
+}
+
+##################################################################
+# Converting unicode file to ascii
+# to be more precise: uft-16 little endian to ascii
+##################################################################
+
+sub convert_unicode_to_ascii
+{
+    my ( $filename ) = @_;
+
+    my @localfile = ();
+
+    my $savfilename = $filename . "_before.unicode";
+    installer::systemactions::copy_one_file($filename, $savfilename);
+
+    open( IN, "<:encoding(UTF16-LE)", $filename ) || installer::exiter::exit_program("ERROR: Cannot open file $filename for reading", "convert_unicode_to_ascii");
+    while ( $line = <IN> ) {
+        push @localfile, $line;
+    }
+    close( IN );
+
+    if ( open( OUT, ">", $filename ) )
+    {
+        print OUT @localfile;
+        close(OUT);
+    }
+}
+
+####################################################################
+# Analyzing the log file created by msimsp.exe to find all
+# files included into the patch.
+####################################################################
+
+sub analyze_msimsp_logfile
+{
+    my ($logfile, $filesarray) = @_;
+
+    # Reading log file after converting from utf-16 (LE) to ascii
+    convert_unicode_to_ascii($logfile);
+    my $logfilecontent = installer::files::read_file($logfile);
+
+    # Creating hash from $filesarray: unique file name -> destination of file
+    my %filehash = ();
+    my %destinationcollector = ();
+
+    for ( my $i = 0; $i <= $#{$filesarray}; $i++ )
+    {
+        my $onefile = ${$filesarray}[$i];
+
+        # Only collecting files with "uniquename" and "destination"
+        if (( exists($onefile->{'uniquename'}) ) && ( exists($onefile->{'uniquename'}) ))
+        {
+            my $uniquefilename = $onefile->{'uniquename'};
+            my $destpath = $onefile->{'destination'};
+            $filehash{$uniquefilename} = $destpath;
+        }
+    }
+
+    # Analyzing log file of msimsp.exe, finding all changed files
+    # and searching all destinations of unique file names.
+    # Content in log file: "INFO File Key: <file key> is modified"
+    # Collecting content in @installer::globals::patchfilecollector
+
+    for ( my $i = 0; $i <= $#{$logfilecontent}; $i++ )
+    {
+        if ( ${$logfilecontent}[$i] =~ /Key\:\s*(.*?) is modified\s*$/ )
+        {
+            my $filekey = $1;
+            if ( exists($filehash{$filekey}) ) { $destinationcollector{$filehash{$filekey}} = 1; }
+            else { installer::exiter::exit_program("ERROR: Could not find file key \"$filekey\" in file collector.", "analyze_msimsp_logfile"); }
+        }
+    }
+
+    foreach my $onedest ( sort keys %destinationcollector ) { push(@installer::globals::patchfilecollector, "$onedest\n"); }
+
+}
+
+####################################################################
+# Creating msp patch files for Windows
+####################################################################
+
+sub create_msp_patch
+{
+    my ($installationdir, $includepatharrayref, $allvariables, $languagestringref, $languagesarrayref, $filesarray) = @_;
+
+    my $force = 1; # print this message even in 'quiet' mode
+    installer::logger::print_message( "\n******************************************\n" );
+    installer::logger::print_message( "... creating msp installation set ...\n", $force );
+    installer::logger::print_message( "******************************************\n" );
+
+    $installer::globals::creating_windows_installer_patch = 1;
+
+    my @needed_files = ("msimsp.exe");  # only required for patch creation process
+    installer::control::check_needed_files_in_path(\@needed_files);
+
+    installer::logger::include_header_into_logfile("Creating msp installation sets:");
+
+    my $firstdir = $installationdir;
+    installer::pathanalyzer::get_path_from_fullqualifiedname(\$firstdir);
+
+    my $lastdir = $installationdir;
+    installer::pathanalyzer::make_absolute_filename_to_relative_filename(\$lastdir);
+
+    if ( $lastdir =~ /\./ ) { $lastdir =~ s/\./_msp_inprogress\./ }
+    else { $lastdir = $lastdir . "_msp_inprogress"; }
+
+    # Removing existing directory "_native_packed_inprogress" and "_native_packed_witherror" and "_native_packed"
+
+    my $mspdir = $firstdir . $lastdir;
+    if ( -d $mspdir ) { installer::systemactions::remove_complete_directory($mspdir); }
+
+    my $olddir = $mspdir;
+    $olddir =~ s/_inprogress/_witherror/;
+    if ( -d $olddir ) { installer::systemactions::remove_complete_directory($olddir); }
+
+    $olddir = $mspdir;
+    $olddir =~ s/_inprogress//;
+    if ( -d $olddir ) { installer::systemactions::remove_complete_directory($olddir); }
+
+    # Creating the new directory for new installation set
+    installer::systemactions::create_directory($mspdir);
+
+    $installer::globals::saveinstalldir = $mspdir;
+
+    installer::logger::include_timestamp_into_logfile("\nPerformance Info: Starting product installation");
+
+    # Installing both installation sets
+    installer::logger::print_message( "... installing products ...\n" );
+    my ($olddatabase, $newdatabase) = install_installation_sets($installationdir);
+
+    installer::logger::include_timestamp_into_logfile("\nPerformance Info: Starting pcp file creation");
+
+    # Create pcp file
+    installer::logger::print_message( "... creating pcp file ...\n" );
+
+    my $localmspdir = installer::systemactions::create_directories("msp", $languagestringref);
+
+    if ( ! $allvariables->{'PCPFILENAME'} ) { installer::exiter::exit_program("ERROR: Property \"PCPFILENAME\" has to be defined.", "create_msp_patch"); }
+    my $pcpfilename = $allvariables->{'PCPFILENAME'};
+
+    if ( $installer::globals::languagepack ) { $pcpfilename =~ s/.pcp\s*$/languagepack.pcp/; }
+    elsif ( $installer::globals::helppack ) { $pcpfilename =~ s/.pcp\s*$/helppack.pcp/; }
+
+    # Searching the pcp file in the include paths
+    my $fullpcpfilenameref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$pcpfilename, $includepatharrayref, 1);
+    if ( $$fullpcpfilenameref eq "" ) { installer::exiter::exit_program("ERROR: pcp file not found: $pcpfilename !", "create_msp_patch"); }
+    my $fullpcpfilenamesource = $$fullpcpfilenameref;
+
+    # Copying pcp file
+    my $fullpcpfilename = $localmspdir . $installer::globals::separator . $pcpfilename;
+    installer::systemactions::copy_one_file($fullpcpfilenamesource, $fullpcpfilename);
+
+    #  a. Extracting tables from msi database: msidb.exe -d <msifile> -f <directory> -e File Media, ...
+    #  b. Changing content of msi database in tables: File, Media, Directory, FeatureComponent
+    #  c. Including tables into msi database: msidb.exe -d <msifile> -f <directory> -i File Media, ...
+
+    # Unpacking tables from pcp file
+    extract_all_tables_from_pcpfile($fullpcpfilename, $localmspdir);
+
+    # Tables, that need to be edited
+    my $tablelist = "Properties TargetImages UpgradedImages ImageFamilies PatchMetadata PatchSequence"; # required tables
+
+    # Saving all tables
+    check_and_save_tables($tablelist, $localmspdir);
+
+    # Setting the name of the new msp file
+    my $mspfilename = set_mspfilename($allvariables, $mspdir, $languagesarrayref);
+
+    # Editing tables
+    edit_tables($tablelist, $localmspdir, $olddatabase, $newdatabase, $mspfilename, $allvariables, $languagestringref);
+
+    # Adding edited tables into pcp file
+    include_tables_into_pcpfile($fullpcpfilename, $localmspdir, $tablelist);
+
+    # Start msimsp.exe
+    installer::logger::include_timestamp_into_logfile("\nPerformance Info: Starting msimsp.exe");
+    my $msimsplogfile = execute_msimsp($fullpcpfilename, $mspfilename, $localmspdir);
+
+    # Sign .msp file
+    if ( defined($ENV{'WINDOWS_BUILD_SIGNING'}) && ($ENV{'WINDOWS_BUILD_SIGNING'} eq 'TRUE') )
+    {
+        my $localmspfilename = $mspfilename;
+        $localmspfilename =~ s/\\/\\\\/g;
+        my $systemcall = "signtool.exe sign ";
+        if ( defined($ENV{'PFXFILE'}) ) { $systemcall .= "-f $ENV{'PFXFILE'} "; }
+        if ( defined($ENV{'PFXPASSWORD'}) ) { $systemcall .= "-p $ENV{'PFXPASSWORD'} "; }
+        if ( defined($ENV{'TIMESTAMPURL'}) ) { $systemcall .= "-t $ENV{'TIMESTAMPURL'} "; } else { $systemcall .= "-t http://timestamp.globalsign.com/scripts/timestamp.dll "; }
+        $systemcall .= "-d \"" . $allvariables->{'PRODUCTNAME'} . " " . $allvariables->{'PRODUCTVERSION'} . " Patch " . $allvariables->{'WINDOWSPATCHLEVEL'} . "\" ";
+        $systemcall .= $localmspfilename;
+        installer::logger::print_message( "... code signing and timestamping with signtool.exe ...\n" );
+
+        my $returnvalue = system($systemcall);
+
+        # do not print password to log
+        if ( defined($ENV{'PFXPASSWORD'}) ) { $systemcall =~ s/$ENV{'PFXPASSWORD'}/********/; }
+        my $infoline = "Systemcall: $systemcall\n";
+        push( @installer::globals::logfileinfo, $infoline);
+
+        if ($returnvalue)
+        {
+            $infoline = "ERROR: Could not execute \"$systemcall\"!\n";
+            push( @installer::globals::logfileinfo, $infoline);
+        }
+        else
+        {
+            $infoline = "Success: Executed \"$systemcall\" successfully!\n";
+            push( @installer::globals::logfileinfo, $infoline);
+        }
+    }
+
+    # Copy final installation set next to msp file
+    installer::logger::include_timestamp_into_logfile("\nPerformance Info: Copying installation set");
+    installer::logger::print_message( "... copying installation set ...\n" );
+
+    my $oldinstallationsetpath = $installer::globals::updatedatabasepath;
+
+    if ( $^O =~ /cygwin/i ) { $oldinstallationsetpath =~ s/\\/\//g; }
+
+    installer::pathanalyzer::get_path_from_fullqualifiedname(\$oldinstallationsetpath);
+    installer::systemactions::copy_complete_directory($oldinstallationsetpath, $mspdir);
+
+    # Copying additional patches into the installation set, if required
+    if (( $allvariables->{'ADDITIONALREQUIREDPATCHES'} ) && ( $allvariables->{'ADDITIONALREQUIREDPATCHES'} ne "" ) && ( ! $installer::globals::languagepack ) && ( ! $installer::globals::helppack ))
+    {
+        my $filename = $allvariables->{'ADDITIONALREQUIREDPATCHES'};
+
+        my $fullfilenameref = installer::scriptitems::get_sourcepath_from_filename_and_includepath(\$filename, $includepatharrayref, 1);
+        if ( $$fullfilenameref eq "" ) { installer::exiter::exit_program("ERROR: Could not find file with required patches, although it is defined: $filename !", "create_msp_patch"); }
+        my $fullfilename = $$fullfilenameref;
+
+        # Reading list file
+        my $listfile = installer::files::read_file($fullfilename);
+
+        # Get name and path of reference database
+        my $requiredpatchfile = get_requiredpatchfile_from_list($listfile, $languagestringref, $fullfilename);
+        if ( $requiredpatchfile eq "" ) { installer::exiter::exit_program("ERROR: Could not find path to required patch in file $fullfilename for language(s) $$languagestringref!", "create_msp_patch"); }
+
+        # Copying patch file
+        installer::systemactions::copy_one_file($requiredpatchfile, $mspdir);
+        # my $infoline = "Copy $requiredpatchfile to $mspdir\n";
+        # push( @installer::globals::logfileinfo, $infoline);
+    }
+
+    # Find all files included into the patch
+    # Analyzing the msimsp log file $msimsplogfile
+    analyze_msimsp_logfile($msimsplogfile, $filesarray);
+
+    # Done
+    installer::logger::include_timestamp_into_logfile("\nPerformance Info: msp creation done");
+
+    return $mspdir;
+}
+
+1;