Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 168 insertions, 0 deletions

diff --git a/sw/source/uibase/config/prtopt.cxx b/sw/source/uibase/config/prtopt.cxx
new file mode 100644
index 000000000..13831df97
--- /dev/null
+++ b/sw/source/uibase/config/prtopt.cxx
@@ -0,0 +1,168 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <unotools/configmgr.hxx>
+#include <prtopt.hxx>
+#include <o3tl/any.hxx>
+#include <osl/diagnose.h>
+#include <com/sun/star/uno/Sequence.hxx>
+
+using namespace utl;
+using namespace com::sun::star::uno;
+
+// Ctor
+Sequence<OUString> SwPrintOptions::GetPropertyNames() const
+{
+    static const char* aPropNames[] =
+    {
+        "Content/Graphic",              //  0
+        "Content/Table",                //  1
+        "Content/Control",              //  2
+        "Content/Background",           //  3
+        "Content/PrintBlack",           //  4
+        "Content/Note",                 //  5
+        "Page/Reversed",                //  6
+        "Page/Brochure",                //  7
+        "Page/BrochureRightToLeft",     //  8
+        "Output/SinglePrintJob",        //  9
+        "Output/Fax",                   // 10
+        "Papertray/FromPrinterSetup",   // 11
+        "Content/Drawing",              // 12 not in SW/Web
+        "Page/LeftPage",                // 13 not in SW/Web
+        "Page/RightPage",               // 14 not in SW/Web
+        "EmptyPages",                   // 15 not in SW/Web
+        "Content/PrintPlaceholders",    // 16 not in Sw/Web
+        "Content/PrintHiddenText"       // 17 not in Sw/Web
+    };
+    const int nCount = m_bIsWeb ? 12 : 18;
+    Sequence<OUString> aNames(nCount);
+    OUString* pNames = aNames.getArray();
+    for(int i = 0; i < nCount; i++)
+    {
+        pNames[i] = OUString::createFromAscii(aPropNames[i]);
+    }
+    return aNames;
+}
+
+SwPrintOptions::SwPrintOptions(bool bWeb) :
+    ConfigItem(bWeb ? OUString("Office.WriterWeb/Print") : OUString("Office.Writer/Print"),
+        ConfigItemMode::ReleaseTree),
+    m_bIsWeb(bWeb)
+{
+    m_bPrintPageBackground = !bWeb;
+    m_bPrintBlackFont = bWeb;
+    m_bPrintTextPlaceholder = m_bPrintHiddenText = false;
+    if (bWeb)
+        m_bPrintEmptyPages = false;
+
+    Sequence<OUString> aNames = GetPropertyNames();
+    Sequence<Any> aValues = GetProperties(aNames);
+    const Any* pValues = aValues.getConstArray();
+    OSL_ENSURE(aValues.getLength() == aNames.getLength(), "GetProperties failed");
+    if(aValues.getLength() == aNames.getLength())
+    {
+        for(int nProp = 0; nProp < aNames.getLength(); nProp++)
+        {
+            if(pValues[nProp].hasValue())
+            {
+                switch(nProp)
+                {
+                    case  0: m_bPrintGraphic      = *o3tl::doAccess<bool>(pValues[nProp]); break;
+                    case  1: m_bPrintTable            = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  2: m_bPrintControl      = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  3: m_bPrintPageBackground= *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  4: m_bPrintBlackFont        = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  5:
+                    {
+                        sal_Int32 nTmp = 0;
+                        pValues[nProp] >>=  nTmp;
+                        m_nPrintPostIts = static_cast<SwPostItMode>(nTmp);
+                    }
+                    break;
+                    case  6: m_bPrintReverse      = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  7: m_bPrintProspect      = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  8: m_bPrintProspectRTL  = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case  9: m_bPrintSingleJobs   = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 10: pValues[nProp] >>= m_sFaxName;  break;
+                    case 11: m_bPaperFromSetup    = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 12: m_bPrintDraw         = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 13: m_bPrintLeftPages    = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 14: m_bPrintRightPages       = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 15: m_bPrintEmptyPages       = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 16: m_bPrintTextPlaceholder = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                    case 17: m_bPrintHiddenText = *o3tl::doAccess<bool>(pValues[nProp]);  break;
+                }
+            }
+        }
+    }
+
+    // currently there is just one checkbox for print drawings and print graphics
+    // In the UI. (File/Print dialog and Tools/Options/.../Print)
+    // And since print graphics is the only available in Writer and WrtierWeb ...
+
+    m_bPrintDraw = m_bPrintGraphic;
+}
+
+SwPrintOptions::~SwPrintOptions()
+{
+}
+
+void SwPrintOptions::Notify( const css::uno::Sequence< OUString >& ) {}
+
+void SwPrintOptions::ImplCommit()
+{
+    Sequence<OUString> aNames = GetPropertyNames();
+
+    Sequence<Any> aValues(aNames.getLength());
+    Any* pValues = aValues.getArray();
+
+    for(int nProp = 0; nProp < aNames.getLength(); nProp++)
+    {
+        switch(nProp)
+        {
+            case  0: pValues[nProp] <<= m_bPrintGraphic; break;
+            case  1: pValues[nProp] <<= m_bPrintTable; break;
+            case  2: pValues[nProp] <<= m_bPrintControl; break;
+            case  3: pValues[nProp] <<= m_bPrintPageBackground; break;
+            case  4: pValues[nProp] <<= m_bPrintBlackFont; break;
+            case  5: pValues[nProp] <<=  static_cast<sal_Int32>(m_nPrintPostIts)       ; break;
+            case  6: pValues[nProp] <<= m_bPrintReverse; break;
+            case  7: pValues[nProp] <<= m_bPrintProspect; break;
+            case  8: pValues[nProp] <<= m_bPrintProspectRTL; break;
+            case  9: pValues[nProp] <<= m_bPrintSingleJobs; break;
+            case 10: pValues[nProp] <<= m_sFaxName;  break;
+            case 11: pValues[nProp] <<= m_bPaperFromSetup; break;
+            case 12: pValues[nProp] <<= m_bPrintDraw; break;
+            case 13: pValues[nProp] <<= m_bPrintLeftPages; break;
+            case 14: pValues[nProp] <<= m_bPrintRightPages; break;
+            case 15: pValues[nProp] <<= m_bPrintEmptyPages; break;
+            case 16: pValues[nProp] <<= m_bPrintTextPlaceholder; break;
+            case 17: pValues[nProp] <<= m_bPrintHiddenText; break;
+        }
+    }
+
+    // currently there is just one checkbox for print drawings and print graphics
+    // In the UI. (File/Print dialog and Tools/Options/.../Print)
+    // And since print graphics is the only available in Writer and WrtierWeb ...
+    m_bPrintDraw = m_bPrintGraphic;
+
+    PutProperties(aNames, aValues);
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */