Adding upstream version 1:7.0.4.upstream/1%7.0.4upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 273 insertions, 0 deletions

diff --git a/sw/source/uibase/shells/listsh.cxx b/sw/source/uibase/shells/listsh.cxx
new file mode 100644
index 000000000..a8d7eb91f
--- /dev/null
+++ b/sw/source/uibase/shells/listsh.cxx
@@ -0,0 +1,273 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <cmdid.h>
+#include <sfx2/request.hxx>
+#include <sfx2/objface.hxx>
+#include <sfx2/bindings.hxx>
+#include <sfx2/viewfrm.hxx>
+#include <svl/eitem.hxx>
+#include <svl/whiter.hxx>
+
+#include <numrule.hxx>
+#include <wrtsh.hxx>
+#include <listsh.hxx>
+#include <view.hxx>
+
+#define ShellClass_SwListShell
+#include <sfx2/msg.hxx>
+#include <swslots.hxx>
+
+#include <IDocumentOutlineNodes.hxx>
+
+SFX_IMPL_INTERFACE(SwListShell, SwBaseShell)
+
+void SwListShell::InitInterface_Impl()
+{
+    GetStaticInterface()->RegisterObjectBar(SFX_OBJECTBAR_OBJECT, SfxVisibilityFlags::Invisible, ToolbarId::Num_Toolbox);
+}
+
+
+// #i35572# Functionality of Numbering/Bullet toolbar
+// for outline numbered paragraphs should match the functions for outlines
+// available in the navigator. Therefore the code in the following
+// function is quite similar the code in SwContentTree::ExecCommand.
+static void lcl_OutlineUpDownWithSubPoints( SwWrtShell& rSh, bool bMove, bool bUp )
+{
+    const SwOutlineNodes::size_type nActPos = rSh.GetOutlinePos();
+    if ( nActPos < SwOutlineNodes::npos && rSh.IsOutlineMovable( nActPos ) )
+    {
+        rSh.Push();
+        rSh.MakeOutlineSel( nActPos, nActPos, true );
+
+        if ( bMove )
+        {
+            const IDocumentOutlineNodes* pIDoc( rSh.getIDocumentOutlineNodesAccess() );
+            const int nActLevel = pIDoc->getOutlineLevel( nActPos );
+            SwOutlineNodes::difference_type nDir = 0;
+
+            if ( !bUp )
+            {
+                // Move down with subpoints:
+                SwOutlineNodes::size_type nActEndPos = nActPos + 1;
+                while ( nActEndPos < pIDoc->getOutlineNodesCount() &&
+                       (!pIDoc->isOutlineInLayout(nActEndPos, *rSh.GetLayout())
+                        || nActLevel < pIDoc->getOutlineLevel(nActEndPos)))
+                {
+                    ++nActEndPos;
+                }
+
+                if ( nActEndPos < pIDoc->getOutlineNodesCount() )
+                {
+                    // The current subpoint which should be moved
+                    // starts at nActPos and ends at nActEndPos - 1
+                    --nActEndPos;
+                    SwOutlineNodes::size_type nDest = nActEndPos + 2;
+                    while ( nDest < pIDoc->getOutlineNodesCount() &&
+                           (!pIDoc->isOutlineInLayout(nDest, *rSh.GetLayout())
+                            || nActLevel < pIDoc->getOutlineLevel(nDest)))
+                    {
+                        ++nDest;
+                    }
+
+                    nDir = nDest - 1 - nActEndPos;
+                }
+            }
+            else
+            {
+                // Move up with subpoints:
+                if ( nActPos > 0 )
+                {
+                    SwOutlineNodes::size_type nDest = nActPos - 1;
+                    while (nDest > 0 &&
+                           (!pIDoc->isOutlineInLayout(nDest, *rSh.GetLayout())
+                            || nActLevel < pIDoc->getOutlineLevel(nDest)))
+                    {
+                        --nDest;
+                    }
+
+                    nDir = nDest - nActPos;
+                }
+            }
+
+            if ( nDir )
+            {
+                rSh.MoveOutlinePara( nDir );
+                rSh.GotoOutline( nActPos + nDir );
+            }
+        }
+        else
+        {
+            // Up/down with subpoints:
+            rSh.OutlineUpDown( bUp ? -1 : 1 );
+        }
+
+        rSh.ClearMark();
+        rSh.Pop(SwCursorShell::PopMode::DeleteCurrent);
+    }
+}
+
+void SwListShell::Execute(SfxRequest &rReq)
+{
+    const SfxItemSet* pArgs = rReq.GetArgs();
+    const sal_uInt16 nSlot = rReq.GetSlot();
+    SwWrtShell& rSh = GetShell();
+
+    // #i35572#
+    const SwNumRule* pCurRule = rSh.GetNumRuleAtCurrCursorPos();
+    OSL_ENSURE( pCurRule, "SwListShell::Execute without NumRule" );
+    bool bOutline = pCurRule && pCurRule->IsOutlineRule();
+
+    switch (nSlot)
+    {
+        case FN_NUM_BULLET_DOWN:
+        case FN_NUM_BULLET_UP:
+            {
+                SfxViewFrame * pFrame = GetView().GetViewFrame();
+
+                rReq.Done();
+                rSh.NumUpDown( nSlot == FN_NUM_BULLET_DOWN );
+                pFrame->GetBindings().Invalidate( SID_TABLE_CELL ); // Update status line!
+            }
+            break;
+
+        case FN_NUM_BULLET_NEXT:
+            rSh.GotoNextNum();
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_NONUM:
+            rSh.NoNum();
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_OFF:
+        {
+            rReq.Ignore();
+            SfxRequest aReq( GetView().GetViewFrame(), FN_NUM_BULLET_ON );
+            aReq.AppendItem( SfxBoolItem( FN_PARAM_1, false ) );
+            aReq.Done();
+            rSh.DelNumRules();
+            break;
+        }
+
+        case FN_NUM_BULLET_OUTLINE_DOWN:
+            if ( bOutline )
+                lcl_OutlineUpDownWithSubPoints( rSh, false, false );
+            else
+                rSh.MoveNumParas(false, false);
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_OUTLINE_MOVEDOWN:
+            if ( bOutline )
+                lcl_OutlineUpDownWithSubPoints( rSh, true, false );
+            else
+                rSh.MoveNumParas(true, false);
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_OUTLINE_MOVEUP:
+            if ( bOutline )
+                lcl_OutlineUpDownWithSubPoints( rSh, true, true );
+            else
+                rSh.MoveNumParas(true, true);
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_OUTLINE_UP:
+            if ( bOutline )
+                lcl_OutlineUpDownWithSubPoints( rSh, false, true );
+            else
+                rSh.MoveNumParas(false, true);
+            rReq.Done();
+            break;
+
+        case FN_NUM_BULLET_PREV:
+            rSh.GotoPrevNum();
+            rReq.Done();
+            break;
+
+        case FN_NUM_OR_NONUM:
+        {
+            bool bApi = rReq.IsAPI();
+            bool bDelete = !rSh.IsNoNum(!bApi);
+            if(pArgs )
+                bDelete = static_cast<const SfxBoolItem &>(pArgs->Get(rReq.GetSlot())).GetValue();
+            rSh.NumOrNoNum( bDelete, !bApi );
+            rReq.AppendItem( SfxBoolItem( nSlot, bDelete ) );
+            rReq.Done();
+        }
+        break;
+        default:
+            OSL_ENSURE(false, "wrong dispatcher");
+            return;
+    }
+}
+
+void SwListShell::GetState(SfxItemSet &rSet)
+{
+    SfxWhichIter aIter( rSet );
+    sal_uInt16 nWhich = aIter.FirstWhich();
+    SwWrtShell& rSh = GetShell();
+    sal_uInt8 nCurrentNumLevel = rSh.GetNumLevel();
+    while ( nWhich )
+    {
+        switch( nWhich )
+        {
+            case FN_NUM_OR_NONUM:
+                rSet.Put(SfxBoolItem(nWhich, GetShell().IsNoNum(false)));
+            break;
+            case FN_NUM_BULLET_OUTLINE_UP:
+            case FN_NUM_BULLET_UP:
+                if(!nCurrentNumLevel)
+                    rSet.DisableItem(nWhich);
+            break;
+            case FN_NUM_BULLET_OUTLINE_DOWN :
+            {
+                sal_uInt8 nUpper = 0;
+                sal_uInt8 nLower = 0;
+                rSh.GetCurrentOutlineLevels( nUpper, nLower );
+                if(nLower == (MAXLEVEL - 1))
+                    rSet.DisableItem(nWhich);
+            }
+            break;
+            case FN_NUM_BULLET_DOWN:
+                if(nCurrentNumLevel == (MAXLEVEL - 1))
+                    rSet.DisableItem(nWhich);
+            break;
+
+            case FN_NUM_BULLET_NONUM:
+                if ( rSh.CursorInsideInputField() )
+                {
+                    rSet.DisableItem(nWhich);
+                }
+                break;
+        }
+        nWhich = aIter.NextWhich();
+    }
+}
+
+SwListShell::SwListShell(SwView &_rView) :
+    SwBaseShell(_rView)
+{
+    SetName("List");
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */