diff options
Diffstat (limited to 'solenv/gbuild/Configuration.mk')
| -rw-r--r-- | solenv/gbuild/Configuration.mk | 456 |
1 files changed, 456 insertions, 0 deletions
diff --git a/solenv/gbuild/Configuration.mk b/solenv/gbuild/Configuration.mk new file mode 100644 index 000000000..028ed63ac --- /dev/null +++ b/solenv/gbuild/Configuration.mk @@ -0,0 +1,456 @@ +# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*- +# +# This file is part of the LibreOffice project. +# +# This Source Code Form is subject to the terms of the Mozilla Public +# License, v. 2.0. If a copy of the MPL was not distributed with this +# file, You can obtain one at http://mozilla.org/MPL/2.0/. +# +# This file incorporates work covered by the following license notice: +# +# Licensed to the Apache Software Foundation (ASF) under one or more +# contributor license agreements. See the NOTICE file distributed +# with this work for additional information regarding copyright +# ownership. The ASF licenses this file to you under the Apache +# License, Version 2.0 (the "License"); you may not use this file +# except in compliance with the License. You may obtain a copy of +# the License at http://www.apache.org/licenses/LICENSE-2.0 . +# + +# Configuration files: a bit of an overview of the targets: +# +# Configuration +# => XcsTarget: schemas +# => buildtools +# => Xcs source +# => XcuDataTarget: data +# => buildtools +# => XcsTarget (schema) +# => Xcu data source +# => XcuModuleTaret: modules +# => buildtools +# => Xcu data source +# => XcuLangpackTarget: langpack (per lang) +# => buildtools +# => Xcu data source +# => XcuResTarget: resources (per lang) +# => buildtools +# => XcuMergeTarget: merge +# => buildtools (cfgex) +# => Xcu data source +# => *.po +# => XcsTarget (schema) + +# The main LibreOffice registry (cf. officecfg/Configuration_officecfg.mk): +gb_Configuration_PRIMARY_REGISTRY_NAME := registry +gb_Configuration_PRIMARY_REGISTRY_SCHEMA_ROOT = \ + $(SRCDIR)/officecfg/registry/schema + +gb_Configuration__stringparam_schemaRoot = --stringparam schemaRoot \ + $(if $(PRIMARY_REGISTRY), \ + $(gb_Configuration_PRIMARY_REGISTRY_SCHEMA_ROOT), \ + $(call gb_XcsTarget_get_target,)) + +gb_Configuration_XSLTCOMMAND = $(call gb_ExternalExecutable_get_command,xsltproc) +gb_Configuration_XSLTCOMMAND_DEPS = $(call gb_ExternalExecutable_get_dependencies,xsltproc) + +# XcsTarget class + +# need to locate a schema file corresponding to some XCU file in the outdir +define gb_XcsTarget_for_XcuTarget +$(call gb_XcsTarget_get_target,$(basename $(1)).xcs) +endef + +gb_Configuration_LANGS := en-US $(filter-out en-US,$(gb_WITH_LANG)) + +gb_XcsTarget_XSLT_SchemaVal := $(SRCDIR)/officecfg/util/schema_val.xsl +gb_XcsTarget_XSLT_Sanity := $(SRCDIR)/officecfg/util/sanity.xsl +gb_XcsTarget_XSLT_SchemaTrim := $(SRCDIR)/officecfg/util/schema_trim.xsl +gb_XcsTarget_DTD_Schema := $(SRCDIR)/officecfg/registry/component-schema.dtd + +define gb_XcsTarget__command +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + --noout \ + --stringparam componentName $(subst /,.,$(basename $(2))) \ + --stringparam root $(subst $(2),,$(3)) \ + $(gb_Configuration__stringparam_schemaRoot) \ + $(gb_XcsTarget_XSLT_SchemaVal) \ + $(3) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + --noout \ + $(gb_XcsTarget_XSLT_Sanity) \ + $(3) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + -o $(1) \ + --stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \ + --stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \ + $(gb_XcsTarget_XSLT_SchemaTrim) \ + $(3)) +endef + +$(call gb_XcsTarget_get_target,%) : \ + $(gb_XcsTarget_XSLT_SchemaVal) $(gb_XcsTarget_XSLT_Sanity) \ + $(gb_XcsTarget_XSLT_SchemaTrim) $(gb_XcsTarget_DTD_Schema) \ + | $(gb_Configuration_XSLTCOMMAND_DEPS) + $(call gb_Output_announce,$*,$(true),XCS,1) + $(call gb_Trace_StartRange,$*,XCS) + $(call gb_XcsTarget__command,$@,$*,$(filter %.xcs,$^)) + $(call gb_Trace_EndRange,$*,XCS) + +$(call gb_XcsTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCS,1) + rm -f $(call gb_XcsTarget_get_target,$*) + + +# XcuDataTarget class + +gb_XcuTarget_XSLT_AllLang := $(SRCDIR)/officecfg/util/alllang.xsl +gb_XcuDataTarget_XSLT_DataVal := $(SRCDIR)/officecfg/util/data_val.xsl +gb_XcuDataTarget_DTD_ComponentUpdate := $(SRCDIR)/officecfg/registry/component-update.dtd + +define gb_XcuDataTarget__command +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + --noout \ + --stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \ + $(gb_Configuration__stringparam_schemaRoot) \ + --path $(SRCDIR)/officecfg/registry \ + $(gb_XcuDataTarget_XSLT_DataVal) \ + $(3) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + -o $(1) \ + --stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \ + $(gb_Configuration__stringparam_schemaRoot) \ + --stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \ + --stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \ + --path $(SRCDIR)/officecfg/registry \ + $(gb_XcuTarget_XSLT_AllLang) \ + $(3)) +endef + +$(call gb_XcuDataTarget_get_target,%) : $(gb_XcuDataTarget_XSLT_DataVal) \ + $(gb_XcuTarget_XSLT_AllLang) $(gb_XcuDataTarget_DTD_ComponentUpdate) \ + | $(gb_Configuration_XSLTCOMMAND_DEPS) + $(call gb_Output_announce,$*,$(true),XCU,2) + $(call gb_Trace_StartRange,$*,XCU) + $(call gb_XcuDataTarget__command,$@,$*,$(filter %.xcu,$^)) + $(call gb_Trace_EndRange,$*,XCU) + +$(call gb_XcuDataTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCU,2) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_XcuDataTarget_get_target,$*)) + + +# XcuModuleTarget class + +define gb_XcuDataSource_for_XcuModuleTarget +$(SRCDIR)/$(basename $(subst -,.,$(basename $(1)))).xcu +endef + +define gb_XcsTarget_for_XcuModuleTarget +$(call gb_XcsTarget_get_target,$(basename $(subst -,.,$(basename $(1)))).xcs) +endef + +define gb_XcuModuleTarget__command +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + -o $(1) \ + --stringparam xcs $(4) \ + $(gb_Configuration__stringparam_schemaRoot) \ + --stringparam module $(notdir $(subst -,/,$(basename $(notdir $(2))))) \ + --stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \ + --stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \ + $(gb_XcuTarget_XSLT_AllLang) \ + $(3)) +endef + +$(call gb_XcuModuleTarget_get_target,%) : $(gb_XcuTarget_XSLT_AllLang) \ + | $(gb_Configuration_XSLTCOMMAND_DEPS) + $(if $(filter %.xcu,$^),,$(error There is no target $(call gb_XcuModuleTarget_get_target,$*))) + $(call gb_Output_announce,$*,$(true),XCM,3) + $(call gb_Trace_StartRange,$*,XCM) + $(call gb_XcuModuleTarget__command,$@,$*,$(filter %.xcu,$^),$(filter %.xcs,$^)) + $(call gb_Trace_EndRange,$*,XCM) + +$(call gb_XcuModuleTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCM,3) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_XcuModuleTarget_get_target,$*)) + + +# XcuLangpackTarget class + +gb_XcuLangpackTarget__get_name_with_lang = $(basename $(1))-$(2)$(suffix $(1)) + +gb_XcuLangpackTarget__get_target_with_lang = \ + $(call gb_XcuLangpackTarget_get_target,$(call gb_XcuLangpackTarget__get_name_with_lang,$(1),$(2))) + +gb_XcuLangpackTarget_SED_delcomment := $(SRCDIR)/officecfg/util/delcomment.sed + +define gb_XcuLangpackTarget__command +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + sed -e "s/__LANGUAGE__/$(LANGUAGE)/" -f $(gb_XcuLangpackTarget_SED_delcomment)\ + $(3) > $(1)) +endef + +$(call gb_XcuLangpackTarget_get_target,%) : \ + $(gb_XcuLangpackTarget_SED_delcomment) + $(call gb_Output_announce,$*,$(true),XCL,1) + $(call gb_Trace_StartRange,$*,XCL) + $(call gb_XcuLangpackTarget__command,$@,$*,$(filter %.tmpl,$^)) + $(call gb_Trace_EndRange,$*,XCL) + +$(call gb_XcuLangpackTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCL,1) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(foreach lang,$(gb_Configuration_LANGS),\ + $(call gb_XcuLangpackTarget__get_target_with_lang,$*,$(lang)))) + + +# XcuMergeTarget class + +gb_XcuMergeTarget_CFGEXDEPS := $(call gb_Executable_get_runtime_dependencies,cfgex) +gb_XcuMergeTarget_CFGEXCOMMAND := $(call gb_Executable_get_command,cfgex) + +define gb_XcuMergeTarget__command +MERGEINPUT=$(call var2file,$(shell $(gb_MKTEMP)),100,$(POFILES)) && \ +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + $(gb_XcuMergeTarget_CFGEXCOMMAND) \ + -i $(3) \ + -o $(1) \ + -m $${MERGEINPUT} \ + -l all) && \ +rm -rf $${MERGEINPUT} + +endef + +$(call gb_XcuMergeTarget_get_target,%) : $(gb_XcuMergeTarget_CFGEXDEPS) + $(if $(filter $(words $(POFILES)),$(words $(wildcard $(POFILES)))),\ + $(call gb_Output_announce,$*,$(true),XCX,1) \ + $(call gb_Trace_StartRange,$*,XCX) \ + $(call gb_XcuMergeTarget__command,$@,$*,$(filter %.xcu,$^)),\ + $(call gb_Trace_EndRange,$*,XCX) \ + mkdir -p $(dir $@) && cp $(filter %.xcu,$^) $@) + +$(call gb_XcuMergeTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCX,1) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_XcuMergeTarget_get_target,$*)) + +# $(call gb_XcuMergeTarget_XcuMergeTarget,target,configuration,prefix,xcufile) +define gb_XcuMergeTarget_XcuMergeTarget +$(call gb_XcuMergeTarget_get_target,$(1)) : \ + $(SRCDIR)/$(3)/$(4) \ + $(wildcard $(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po)) +$(call gb_XcuMergeTarget_get_target,$(1)) : \ + POFILES := $(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po) +$(foreach lang,$(gb_TRANS_LANGS),$(gb_POLOCATION)/$(lang)/$(patsubst %/,%,$(dir $(1))).po) : +endef + + +# XcuResTarget class + +# locale is extracted from the stem (parameter $(2)) +define gb_XcuResTarget__command +$(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $(1)) && \ + $(gb_Configuration_XSLTCOMMAND) --nonet \ + -o $(1) \ + --stringparam xcs $(call gb_XcsTarget_for_XcuTarget,$(XCUFILE)) \ + $(gb_Configuration__stringparam_schemaRoot) \ + --stringparam locale $(word 2,$(subst /, ,$(2))) \ + --stringparam LIBO_SHARE_FOLDER $(LIBO_SHARE_FOLDER) \ + --stringparam LIBO_SHARE_HELP_FOLDER $(LIBO_SHARE_HELP_FOLDER) \ + --path $(SRCDIR)/officecfg/registry \ + $(gb_XcuTarget_XSLT_AllLang) \ + $(3)) +endef + +$(call gb_XcuResTarget_get_target,%) : $(gb_XcuTarget_XSLT_AllLang) \ + | $(gb_Configuration_XSLTCOMMAND_DEPS) + $(call gb_Output_announce,$*,$(true),XCR,2) + $(call gb_Trace_StartRange,$*,XCR) + $(call gb_XcuResTarget__command,$@,$*,$(filter %.xcu,$^)) + $(call gb_Trace_EndRange,$*,XCR) + +$(call gb_XcuResTarget_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),XCR,2) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_XcuResTarget_get_target,$*)) + +# $(call gb_XcuResTarget_XcuResTarget,target,configuration,prefix,xcufile,lang) +# this depends either on the source or on the merge target (if WITH_LANG) +define gb_XcuResTarget_XcuResTarget +ifeq ($(strip $(gb_WITH_LANG)),) +$(call gb_XcuResTarget_get_target,$(1)) : $(SRCDIR)/$(3)/$(4) +else +$(call gb_XcuResTarget_get_target,$(1)) : \ + $(call gb_XcuMergeTarget_get_target,$(3)/$(4)) +endif +$(call gb_XcuResTarget_get_target,$(1)) : \ + $(call gb_XcsTarget_for_XcuTarget,$(4)) +$(call gb_XcuResTarget_get_target,$(1)) : PRIMARY_REGISTRY := $(filter $(2),$(gb_Configuration_PRIMARY_REGISTRY_NAME)) +$(call gb_XcuResTarget_get_target,$(1)) : XCUFILE := $(4) +endef + + +# Configuration class + +$(call gb_Configuration_get_clean_target,%) : + $(call gb_Output_announce,$*,$(false),CFG,4) + $(call gb_Helper_abbreviate_dirs,\ + rm -f $(call gb_Configuration_get_target,$*) $(call gb_Configuration_get_preparation_target,$*)) + +$(call gb_Configuration_get_target,%) : + $(call gb_Output_announce,$*,$(true),CFG,4) + $(call gb_Trace_MakeMark,$*,CFG) + $(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $@) && touch $@) + +$(call gb_Configuration_get_preparation_target,%) : + $(call gb_Helper_abbreviate_dirs,\ + mkdir -p $(dir $@) && touch $@) + +# $(call gb_Configuration_Configuration,configuration,nodeliver) +# last parameter may be used to turn off delivering of files +# FIXME: not anymore, no files are delivered now +define gb_Configuration_Configuration +$(eval gb_Configuration_NODELIVER_$(1) := $(2)) + +$$(eval $$(call gb_Module_register_target,$(call gb_Configuration_get_target,$(1)),$(call gb_Configuration_get_clean_target,$(1)))) +$(call gb_Helper_make_userfriendly_targets,$(1),Configuration) + +endef + +# $(call gb_Configuration_add_schema,configuration,prefix,xcsfile) +# hopefully extensions do not need to add schemas with same name as officecfg +define gb_Configuration_add_schema +$(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcsTarget_get_clean_target,$(3)) +$(call gb_XcsTarget_get_target,$(3)) : \ + $(SRCDIR)/$(2)/$(3) \ + $(call gb_Configuration_get_preparation_target,$(1)) +$(call gb_XcsTarget_get_target,$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME)) +$(call gb_Configuration_get_target,$(1)) : \ + $(call gb_XcsTarget_get_target,$(3)) + +endef + +#$(call gb_Configuration_add_schemas,configuration,prefix,xcsfiles) +define gb_Configuration_add_schemas +$(foreach xcs,$(3),$(call gb_Configuration_add_schema,$(1),$(2),$(xcs))) + +endef + +# $(call gb_Configuration_add_data,configuration,prefix,xcufile) +define gb_Configuration_add_data +$(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcuDataTarget_get_clean_target,$(2)/$(3)) +$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : \ + $(SRCDIR)/$(2)/$(3) \ + $(call gb_Configuration_get_preparation_target,$(1)) \ + $(call gb_XcsTarget_for_XcuTarget,$(3)) +$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME)) +$(call gb_XcuDataTarget_get_target,$(2)/$(3)) : XCUFILE := $(3) +$(call gb_Configuration_get_target,$(1)) : \ + $(call gb_XcuDataTarget_get_target,$(2)/$(3)) + +endef + +#$(call gb_Configuration_add_datas,configuration,prefix,xcufiles) +define gb_Configuration_add_datas +$(foreach xcu,$(3),$(call gb_Configuration_add_data,$(1),$(2),$(xcu))) + +endef + +# $(call gb_Configuration_add_spool_module,configuration,prefix,xcufile) +define gb_Configuration_add_spool_module +$(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcuModuleTarget_get_clean_target,$(2)/$(3)) +$(call gb_XcuModuleTarget_get_target,$(2)/$(3)) : \ + $(call gb_XcuDataSource_for_XcuModuleTarget,$(2)/$(3)) \ + $(call gb_Configuration_get_preparation_target,$(1)) \ + $(call gb_XcsTarget_for_XcuModuleTarget,$(3)) +$(call gb_XcuModuleTarget_get_target,$(2)/$(3)) : PRIMARY_REGISTRY := $(filter $(1),$(gb_Configuration_PRIMARY_REGISTRY_NAME)) +$(call gb_Configuration_get_target,$(1)) : \ + $(call gb_XcuModuleTarget_get_target,$(2)/$(3)) + +endef + +# $(call gb_Configuration_add_spool_modules,configuration,prefix,xcufiles) +define gb_Configuration_add_spool_modules +$(foreach xcu,$(3),$(call gb_Configuration_add_spool_module,$(1),$(2),$(xcu))) + +endef + +define gb_Configuration__add_langpack +$(if $(gb_Configuration_NODELIVER_$(1)),\ + $(error TODO not needed yet: cannot add langpack if nodeliver)) +$(call gb_Configuration_get_target,$(1)) : \ + $(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4)) +$(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4)) : \ + $(SRCDIR)/$(2)/$(3).tmpl +$(call gb_XcuLangpackTarget__get_target_with_lang,$(3),$(4)) : LANGUAGE := $(4) + +endef + +# $(call gb_Configuration_add_spool_langpack,configuration,prefix,xcufile) +define gb_Configuration_add_spool_langpack +$(foreach lang,$(gb_Configuration_LANGS),$(eval \ + $(call gb_Configuration__add_langpack,$(1),$(2),$(strip $(3)),$(lang)))) +$(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcuLangpackTarget_get_clean_target,$(strip $(3))) + +endef + +# $(call gb_Configuration_add_localized_data,configuration,prefix,xcufile) +define gb_Configuration_add_localized_data +$(eval $(call gb_Configuration_add_data,$(1),$(2),$(3))) +ifneq ($(strip $(gb_WITH_LANG)),) +$(eval $(call gb_XcuMergeTarget_XcuMergeTarget,$(2)/$(3),$(1),$(2),$(3))) +$(eval $(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcuMergeTarget_get_clean_target,$(2)/$(3))) +endif +$(foreach lang,$(gb_Configuration_LANGS),$(eval \ + $(call gb_XcuResTarget_XcuResTarget,$(1)/$(lang)/$(3),$(1),$(2),$(3),$(lang)))) +$(foreach lang,$(gb_Configuration_LANGS),$(eval \ + $(call gb_Configuration_get_target,$(1)) : \ + $(call gb_XcuResTarget_get_target,$(1)/$(lang)/$(3)))) +$(foreach lang,$(gb_Configuration_LANGS),$(eval \ + $(call gb_Configuration_get_clean_target,$(1)) : \ + $(call gb_XcuResTarget_get_clean_target,$(1)/$(lang)/$(3)))) + +endef + +# $(call gb_Configuration_add_localized_datas,configuration,prefix,xcufile) +define gb_Configuration_add_localized_datas +$(foreach xcu,$(3),$(call gb_Configuration_add_localized_data,$(1),$(2),$(xcu))) + +endef + +# Set extra registry this configuration can use schemas from. +# +# Example: +# # foo needs schemas from the main configuration +# $(eval $(call gb_Configuration_use_configuration,foo,registry)) +define gb_Configuration_use_configuration +$(call gb_Configuration_get_preparation_target,$(1)) : $(call gb_Configuration_get_target,$(2)) + +endef + +# apparently extensions package the XcuMergeTarget directly... +# trivial convenience function to get the right file: +ifeq ($(gb_WITH_LANG),) +gb_XcuFile_for_extension = $(SRCDIR)/$(1) +else +gb_XcuFile_for_extension = $(call gb_XcuMergeTarget_get_target,$(1)) +endif + +# vim: set noet sw=4 ts=4: |