diff options
Diffstat (limited to 'unotools/source/config/moduleoptions.cxx')
| -rw-r--r-- | unotools/source/config/moduleoptions.cxx | 1118 |
1 files changed, 1118 insertions, 0 deletions
diff --git a/unotools/source/config/moduleoptions.cxx b/unotools/source/config/moduleoptions.cxx new file mode 100644 index 000000000..8082749e9 --- /dev/null +++ b/unotools/source/config/moduleoptions.cxx @@ -0,0 +1,1118 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <unotools/moduleoptions.hxx> +#include <comphelper/sequenceashashmap.hxx> +#include <unotools/configitem.hxx> +#include <comphelper/processfactory.hxx> +#include <comphelper/sequence.hxx> +#include <osl/diagnose.h> +#include <o3tl/enumarray.hxx> +#include <rtl/instance.hxx> +#include <com/sun/star/uno/Any.hxx> +#include <com/sun/star/uno/Sequence.hxx> +#include <com/sun/star/beans/PropertyValue.hpp> +#include <com/sun/star/container/XNameAccess.hpp> +#include <com/sun/star/frame/XModel.hpp> +#include <com/sun/star/lang/XServiceInfo.hpp> +#include <com/sun/star/document/XTypeDetection.hpp> +#include <com/sun/star/util/PathSubstitution.hpp> +#include <com/sun/star/util/XStringSubstitution.hpp> + +#include "itemholder1.hxx" + +/*-************************************************************************************************************ + @descr These values are used to define necessary keys from our configuration management to support + all functionality of these implementation. + It's a fast way to make changes if some keys change its name or location! + + Property handle are necessary to specify right position in return list of configuration + for asked values. We ask it with a list of properties to get its values. The returned list + has the same order like our given name list! + e.g.: + NAMELIST[ PROPERTYHANDLE_xxx ] => VALUELIST[ PROPERTYHANDLE_xxx ] +*//*-*************************************************************************************************************/ +#define ROOTNODE_FACTORIES "Setup/Office/Factories" +#define PATHSEPARATOR "/" + +// Attention: The property "ooSetupFactoryEmptyDocumentURL" is read from configuration but not used! There is +// special code that uses hard coded strings to return them. +#define PROPERTYNAME_SHORTNAME "ooSetupFactoryShortName" +#define PROPERTYNAME_TEMPLATEFILE "ooSetupFactoryTemplateFile" +#define PROPERTYNAME_WINDOWATTRIBUTES "ooSetupFactoryWindowAttributes" +#define PROPERTYNAME_EMPTYDOCUMENTURL "ooSetupFactoryEmptyDocumentURL" +#define PROPERTYNAME_DEFAULTFILTER "ooSetupFactoryDefaultFilter" +#define PROPERTYNAME_ICON "ooSetupFactoryIcon" + +#define PROPERTYHANDLE_SHORTNAME 0 +#define PROPERTYHANDLE_TEMPLATEFILE 1 +#define PROPERTYHANDLE_WINDOWATTRIBUTES 2 +#define PROPERTYHANDLE_EMPTYDOCUMENTURL 3 +#define PROPERTYHANDLE_DEFAULTFILTER 4 +#define PROPERTYHANDLE_ICON 5 + +#define PROPERTYCOUNT 6 + +#define FACTORYNAME_WRITER "com.sun.star.text.TextDocument" +#define FACTORYNAME_WRITERWEB "com.sun.star.text.WebDocument" +#define FACTORYNAME_WRITERGLOBAL "com.sun.star.text.GlobalDocument" +#define FACTORYNAME_CALC "com.sun.star.sheet.SpreadsheetDocument" +#define FACTORYNAME_DRAW "com.sun.star.drawing.DrawingDocument" +#define FACTORYNAME_IMPRESS "com.sun.star.presentation.PresentationDocument" +#define FACTORYNAME_MATH "com.sun.star.formula.FormulaProperties" +#define FACTORYNAME_CHART "com.sun.star.chart2.ChartDocument" +#define FACTORYNAME_DATABASE "com.sun.star.sdb.OfficeDatabaseDocument" +#define FACTORYNAME_STARTMODULE "com.sun.star.frame.StartModule" +#define FACTORYNAME_BASIC "com.sun.star.script.BasicIDE" + +#define FACTORYCOUNT 11 + +namespace { + +/*-************************************************************************************************************ + @descr This struct hold information about one factory. We declare a complete array which can hold infos + for all well known factories. Values of enum "EFactory" (see header!) are directly used as index! + So we can support a fast access on this information. +*//*-*************************************************************************************************************/ +struct FactoryInfo +{ + public: + + // initialize empty struct + FactoryInfo() + { + free(); + } + + // easy way to reset struct member! + void free() + { + bInstalled = false; + sFactory.clear(); + sTemplateFile.clear(); + sDefaultFilter.clear(); + nIcon = 0; + bChangedTemplateFile = false; + bChangedDefaultFilter = false; + bDefaultFilterReadonly = false; + } + + // returns list of properties, which has changed only! + // We use given value of sNodeBase to build full qualified paths ... + // Last sign of it must be "/". because we use it directly, without any additional things! + css::uno::Sequence< css::beans::PropertyValue > getChangedProperties( const OUString& sNodeBase ) + { + // a) reserve memory for max. count of changed properties + // b) add names and values of changed ones only and count it + // c) resize return list by using count + css::uno::Sequence< css::beans::PropertyValue > lProperties ( 4 ); + sal_Int8 nRealyChanged = 0; + + if( bChangedTemplateFile ) + { + lProperties[nRealyChanged].Name = sNodeBase + PROPERTYNAME_TEMPLATEFILE; + + if ( !sTemplateFile.isEmpty() ) + { + lProperties[nRealyChanged].Value + <<= getStringSubstitution() + ->reSubstituteVariables( sTemplateFile ); + } + else + { + lProperties[nRealyChanged].Value <<= sTemplateFile; + } + + ++nRealyChanged; + } + if( bChangedDefaultFilter ) + { + lProperties[nRealyChanged].Name = sNodeBase + PROPERTYNAME_DEFAULTFILTER; + lProperties[nRealyChanged].Value <<= sDefaultFilter; + ++nRealyChanged; + } + + // Don't forget to reset changed flags! Otherwise we save it again and again and ... + bChangedTemplateFile = false; + bChangedDefaultFilter = false; + + lProperties.realloc( nRealyChanged ); + return lProperties; + } + + // We must support setting AND marking of changed values. + // That's why we can't make our member public. We must use get/set/init methods + // to control access on it! + bool getInstalled () const { return bInstalled; }; + const OUString& getFactory () const { return sFactory; }; + const OUString& getTemplateFile () const { return sTemplateFile; }; + const OUString& getDefaultFilter () const { return sDefaultFilter; }; + bool isDefaultFilterReadonly() const { return bDefaultFilterReadonly; } + sal_Int32 getIcon () const { return nIcon; }; + + // If you call set-methods - we check for changes of values and mark it. + // But if you wish to set it without that... you must initialize it! + void initInstalled () { bInstalled = true; } + void initFactory ( const OUString& sNewFactory ) { sFactory = sNewFactory; } + void initDefaultFilter ( const OUString& sNewDefaultFilter ) { sDefaultFilter = sNewDefaultFilter; } + void setDefaultFilterReadonly( const bool bVal){bDefaultFilterReadonly = bVal;} + void initIcon ( sal_Int32 nNewIcon ) { nIcon = nNewIcon; } + + void initTemplateFile( const OUString& sNewTemplateFile ) + { + if ( !sNewTemplateFile.isEmpty() ) + { + sTemplateFile= getStringSubstitution()->substituteVariables( sNewTemplateFile, false ); + } + else + { + sTemplateFile = sNewTemplateFile; + } + } + + void setTemplateFile( const OUString& sNewTemplateFile ) + { + if( sTemplateFile != sNewTemplateFile ) + { + sTemplateFile = sNewTemplateFile; + bChangedTemplateFile = true; + } + }; + + void setDefaultFilter( const OUString& sNewDefaultFilter ) + { + if( sDefaultFilter != sNewDefaultFilter ) + { + sDefaultFilter = sNewDefaultFilter; + bChangedDefaultFilter = true; + } + }; + + private: + css::uno::Reference< css::util::XStringSubstitution > const & getStringSubstitution() + { + if ( !xSubstVars.is() ) + { + xSubstVars.set( css::util::PathSubstitution::create(::comphelper::getProcessComponentContext()) ); + } + return xSubstVars; + } + + bool bInstalled; + OUString sFactory; + OUString sTemplateFile; + OUString sDefaultFilter; + sal_Int32 nIcon; + + bool bChangedTemplateFile :1; + bool bChangedDefaultFilter :1; + bool bDefaultFilterReadonly :1; + + css::uno::Reference< css::util::XStringSubstitution > xSubstVars; +}; + +} + +class SvtModuleOptions_Impl : public ::utl::ConfigItem +{ + + // public methods + + public: + + // constructor / destructor + + SvtModuleOptions_Impl(); + virtual ~SvtModuleOptions_Impl() override; + + // override methods of baseclass + + virtual void Notify( const css::uno::Sequence< OUString >& lPropertyNames ) override; + + // public interface + + bool IsModuleInstalled ( SvtModuleOptions::EModule eModule ) const; + css::uno::Sequence < OUString > GetAllServiceNames(); + OUString const & GetFactoryName ( SvtModuleOptions::EFactory eFactory ) const; + OUString const & GetFactoryStandardTemplate( SvtModuleOptions::EFactory eFactory ) const; + static OUString GetFactoryEmptyDocumentURL( SvtModuleOptions::EFactory eFactory ); + OUString const & GetFactoryDefaultFilter ( SvtModuleOptions::EFactory eFactory ) const; + bool IsDefaultFilterReadonly( SvtModuleOptions::EFactory eFactory ) const; + sal_Int32 GetFactoryIcon ( SvtModuleOptions::EFactory eFactory ) const; + static bool ClassifyFactoryByName ( const OUString& sName , + SvtModuleOptions::EFactory& eFactory ); + void SetFactoryStandardTemplate( SvtModuleOptions::EFactory eFactory , + const OUString& sTemplate ); + void SetFactoryDefaultFilter ( SvtModuleOptions::EFactory eFactory , + const OUString& sFilter ); + void MakeReadonlyStatesAvailable(); + + // private methods + + private: + static css::uno::Sequence< OUString > impl_ExpandSetNames ( const css::uno::Sequence< OUString >& lSetNames ); + void impl_Read ( const css::uno::Sequence< OUString >& lSetNames ); + + virtual void ImplCommit() override; + + // private member + + private: + o3tl::enumarray<SvtModuleOptions::EFactory, FactoryInfo> m_lFactories; + bool m_bReadOnlyStatesWellKnown; +}; + +/*-************************************************************************************************************ + @short default ctor + @descr We open our configuration here and read all necessary values from it. + These values are cached till everyone call Commit(). Then we write changed ones back to cfg. + + @seealso baseclass ConfigItem + @seealso method impl_Read() + @threadsafe no +*//*-*************************************************************************************************************/ +SvtModuleOptions_Impl::SvtModuleOptions_Impl() + : ::utl::ConfigItem( ROOTNODE_FACTORIES ) + , m_bReadOnlyStatesWellKnown( false ) +{ + // First initialize list of factory infos! Otherwise we couldn't guarantee right working of these class. + for( auto & rFactory : m_lFactories ) + rFactory.free(); + + // Get name list of all existing set node names in configuration to read her properties in impl_Read(). + // These list is a list of long names of our factories. + const css::uno::Sequence< OUString > lFactories = GetNodeNames( OUString() ); + impl_Read( lFactories ); + + // Enable notification for changes by using configuration directly. + // So we can update our internal values immediately. + EnableNotification( lFactories ); +} + +SvtModuleOptions_Impl::~SvtModuleOptions_Impl() +{ + assert(!IsModified()); // should have been committed +} + +/*-************************************************************************************************************ + @short called for notify of configmanager + @descr This method is called from the ConfigManager before application ends or from the + PropertyChangeListener if the sub tree broadcasts changes. You must update our + internal values. + + @attention We are registered for pure set node names only. So we can use our internal method "impl_Read()" to + update our info list. Because - this method expand given name list to full qualified property list + and use it to read the values. These values are filled into our internal member list m_lFactories + at right position. + + @seealso method impl_Read() + + @param "lNames" is the list of set node entries which should be updated. + @threadsafe no +*//*-*************************************************************************************************************/ +void SvtModuleOptions_Impl::Notify( const css::uno::Sequence< OUString >& ) +{ + OSL_FAIL( "SvtModuleOptions_Impl::Notify() Not implemented yet!" ); +} + +/*-**************************************************************************************************** + @short write changes to configuration + @descr This method writes the changed values into the sub tree + and should always called in our destructor to guarantee consistency of config data. + + @attention We clear complete set in configuration first and write it completely new! So we don't must + distinguish between existing, added or removed elements. Our internal cached values + are the only and right ones. + + @seealso baseclass ConfigItem + @threadsafe no +*//*-*****************************************************************************************************/ +void SvtModuleOptions_Impl::ImplCommit() +{ + // Reserve memory for ALL possible factory properties! + // Step over all factories and get her really changed values only. + // Build list of these ones and use it for commit. + css::uno::Sequence< css::beans::PropertyValue > lCommitProperties( FACTORYCOUNT*PROPERTYCOUNT ); + sal_Int32 nRealCount = 0; + OUString sBasePath; + for( FactoryInfo & rInfo : m_lFactories ) + { + // These path is used to build full qualified property names... + // See pInfo->getChangedProperties() for further information + sBasePath = PATHSEPARATOR + rInfo.getFactory() + PATHSEPARATOR; + + const css::uno::Sequence< css::beans::PropertyValue > lChangedProperties = rInfo.getChangedProperties ( sBasePath ); + std::copy(lChangedProperties.begin(), lChangedProperties.end(), std::next(lCommitProperties.begin(), nRealCount)); + nRealCount += lChangedProperties.getLength(); + } + // Resize commit list to real size. + // If nothing to do - suppress calling of configuration... + // It could be too expensive :-) + if( nRealCount > 0 ) + { + lCommitProperties.realloc( nRealCount ); + SetSetProperties( OUString(), lCommitProperties ); + } +} + +/*-**************************************************************************************************** + @short access method to get internal values + @descr These methods implement easy access to our internal values. + You give us right enum value to specify which module interest you ... we return right information. + + @attention Some people use any value as enum ... but we support in header specified values only! + We use it directly as index in our internal list. If enum value isn't right - we crash with an + "index out of range"!!! Please use me right - otherwise there is no guarantee. + @param "eModule" , index in list - specify module + @return Queried information. + + @onerror We return default values. (mostly "not installed"!) + @threadsafe no +*//*-*****************************************************************************************************/ +bool SvtModuleOptions_Impl::IsModuleInstalled( SvtModuleOptions::EModule eModule ) const +{ + switch( eModule ) + { + case SvtModuleOptions::EModule::WRITER: + return m_lFactories[SvtModuleOptions::EFactory::WRITER].getInstalled(); + case SvtModuleOptions::EModule::WEB: + return m_lFactories[SvtModuleOptions::EFactory::WRITERWEB].getInstalled(); + case SvtModuleOptions::EModule::GLOBAL: + return m_lFactories[SvtModuleOptions::EFactory::WRITERGLOBAL].getInstalled(); + case SvtModuleOptions::EModule::CALC: + return m_lFactories[SvtModuleOptions::EFactory::CALC].getInstalled(); + case SvtModuleOptions::EModule::DRAW: + return m_lFactories[SvtModuleOptions::EFactory::DRAW].getInstalled(); + case SvtModuleOptions::EModule::IMPRESS: + return m_lFactories[SvtModuleOptions::EFactory::IMPRESS].getInstalled(); + case SvtModuleOptions::EModule::MATH: + return m_lFactories[SvtModuleOptions::EFactory::MATH].getInstalled(); + case SvtModuleOptions::EModule::CHART: + return m_lFactories[SvtModuleOptions::EFactory::CHART].getInstalled(); + case SvtModuleOptions::EModule::STARTMODULE: + return m_lFactories[SvtModuleOptions::EFactory::STARTMODULE].getInstalled(); + case SvtModuleOptions::EModule::BASIC: + return true; // Couldn't be deselected by setup yet! + case SvtModuleOptions::EModule::DATABASE: + return m_lFactories[SvtModuleOptions::EFactory::DATABASE].getInstalled(); + } + + return false; +} + +css::uno::Sequence < OUString > SvtModuleOptions_Impl::GetAllServiceNames() +{ + std::vector<OUString> aVec; + + for( const auto & rFactory : m_lFactories ) + if( rFactory.getInstalled() ) + aVec.push_back( rFactory.getFactory() ); + + return comphelper::containerToSequence(aVec); +} + +OUString const & SvtModuleOptions_Impl::GetFactoryName( SvtModuleOptions::EFactory eFactory ) const +{ + return m_lFactories[eFactory].getFactory(); +} + +OUString SvtModuleOptions::GetFactoryShortName(SvtModuleOptions::EFactory eFactory) +{ + // Attention: Hard configured yet ... because it's not fine to make changes possible by xml file yet. + // But it's good to plan further possibilities! + + //return m_lFactories[eFactory].sShortName; + + OUString sShortName; + switch( eFactory ) + { + case SvtModuleOptions::EFactory::WRITER : sShortName = "swriter"; + break; + case SvtModuleOptions::EFactory::WRITERWEB: sShortName = "swriter/web"; + break; + case SvtModuleOptions::EFactory::WRITERGLOBAL: sShortName = "swriter/GlobalDocument"; + break; + case SvtModuleOptions::EFactory::CALC : sShortName = "scalc"; + break; + case SvtModuleOptions::EFactory::DRAW : sShortName = "sdraw"; + break; + case SvtModuleOptions::EFactory::IMPRESS : sShortName = "simpress"; + break; + case SvtModuleOptions::EFactory::MATH : sShortName = "smath"; + break; + case SvtModuleOptions::EFactory::CHART : sShortName = "schart"; + break; + case SvtModuleOptions::EFactory::BASIC : sShortName = "sbasic"; + break; + case SvtModuleOptions::EFactory::DATABASE : sShortName = "sdatabase"; + break; + default: + OSL_FAIL( "unknown factory" ); + break; + } + + return sShortName; +} + +OUString const & SvtModuleOptions_Impl::GetFactoryStandardTemplate( SvtModuleOptions::EFactory eFactory ) const +{ + return m_lFactories[eFactory].getTemplateFile(); +} + +OUString SvtModuleOptions_Impl::GetFactoryEmptyDocumentURL( SvtModuleOptions::EFactory eFactory ) +{ + // Attention: Hard configured yet ... because it's not fine to make changes possible by xml file yet. + // But it's good to plan further possibilities! + + //return m_lFactories[eFactory].getEmptyDocumentURL(); + + OUString sURL; + switch( eFactory ) + { + case SvtModuleOptions::EFactory::WRITER : sURL = "private:factory/swriter"; + break; + case SvtModuleOptions::EFactory::WRITERWEB : sURL = "private:factory/swriter/web"; + break; + case SvtModuleOptions::EFactory::WRITERGLOBAL : sURL = "private:factory/swriter/GlobalDocument"; + break; + case SvtModuleOptions::EFactory::CALC : sURL = "private:factory/scalc"; + break; + case SvtModuleOptions::EFactory::DRAW : sURL = "private:factory/sdraw"; + break; + case SvtModuleOptions::EFactory::IMPRESS : sURL = "private:factory/simpress?slot=6686"; + break; + case SvtModuleOptions::EFactory::MATH : sURL = "private:factory/smath"; + break; + case SvtModuleOptions::EFactory::CHART : sURL = "private:factory/schart"; + break; + case SvtModuleOptions::EFactory::BASIC : sURL = "private:factory/sbasic"; + break; + case SvtModuleOptions::EFactory::DATABASE : sURL = "private:factory/sdatabase?Interactive"; + break; + default: + OSL_FAIL( "unknown factory" ); + break; + } + return sURL; +} + +OUString const & SvtModuleOptions_Impl::GetFactoryDefaultFilter( SvtModuleOptions::EFactory eFactory ) const +{ + return m_lFactories[eFactory].getDefaultFilter(); +} + +bool SvtModuleOptions_Impl::IsDefaultFilterReadonly( SvtModuleOptions::EFactory eFactory ) const +{ + return m_lFactories[eFactory].isDefaultFilterReadonly(); +} + +sal_Int32 SvtModuleOptions_Impl::GetFactoryIcon( SvtModuleOptions::EFactory eFactory ) const +{ + return m_lFactories[eFactory].getIcon(); +} + +void SvtModuleOptions_Impl::SetFactoryStandardTemplate( SvtModuleOptions::EFactory eFactory , + const OUString& sTemplate ) +{ + m_lFactories[eFactory].setTemplateFile( sTemplate ); + SetModified(); +} + +void SvtModuleOptions_Impl::SetFactoryDefaultFilter( SvtModuleOptions::EFactory eFactory, + const OUString& sFilter ) +{ + m_lFactories[eFactory].setDefaultFilter( sFilter ); + SetModified(); +} + +/*-************************************************************************************************************ + @short return list of key names of our configuration management which represent our module tree + @descr You give use a list of current existing set node names .. and we expand it for all + well known properties which are necessary for this implementation. + These full expanded list should be used to get values of this properties. + + @seealso ctor + @return List of all relative addressed properties of given set entry names. + + @onerror List will be empty. + @threadsafe no +*//*-*************************************************************************************************************/ +css::uno::Sequence< OUString > SvtModuleOptions_Impl::impl_ExpandSetNames( const css::uno::Sequence< OUString >& lSetNames ) +{ + sal_Int32 nCount = lSetNames.getLength(); + css::uno::Sequence< OUString > lPropNames ( nCount*PROPERTYCOUNT ); + OUString* pPropNames = lPropNames.getArray(); + sal_Int32 nPropStart = 0; + + for( const auto& rSetName : lSetNames ) + { + pPropNames[nPropStart+PROPERTYHANDLE_SHORTNAME ] = rSetName + PATHSEPARATOR PROPERTYNAME_SHORTNAME; + pPropNames[nPropStart+PROPERTYHANDLE_TEMPLATEFILE ] = rSetName + PATHSEPARATOR PROPERTYNAME_TEMPLATEFILE; + pPropNames[nPropStart+PROPERTYHANDLE_WINDOWATTRIBUTES] = rSetName + PATHSEPARATOR PROPERTYNAME_WINDOWATTRIBUTES; + pPropNames[nPropStart+PROPERTYHANDLE_EMPTYDOCUMENTURL] = rSetName + PATHSEPARATOR PROPERTYNAME_EMPTYDOCUMENTURL; + pPropNames[nPropStart+PROPERTYHANDLE_DEFAULTFILTER ] = rSetName + PATHSEPARATOR PROPERTYNAME_DEFAULTFILTER; + pPropNames[nPropStart+PROPERTYHANDLE_ICON ] = rSetName + PATHSEPARATOR PROPERTYNAME_ICON; + nPropStart += PROPERTYCOUNT; + } + + return lPropNames; +} + +/*-************************************************************************************************************ + @short helper to classify given factory by name + @descr Every factory has its own long and short name. So we can match right enum value for internal using. + + @attention We change in/out parameter "eFactory" in every case! But you should use it only, if return value is sal_True! + Algorithm: Set out-parameter to probably value ... and check the longname. + If it matches with these factory - break operation and return true AND right set parameter. + Otherwise try next one and so on. If no factory was found return false. Out parameter eFactory + is set to last tried value but shouldn't be used! Because our return value is false! + @param "sLongName" , long name of factory, which should be classified + @return "eFactory" , right enum value, which match given long name + and true for successfully classification, false otherwise + + @onerror We return false. + @threadsafe no +*//*-*************************************************************************************************************/ +bool SvtModuleOptions_Impl::ClassifyFactoryByName( const OUString& sName, SvtModuleOptions::EFactory& eFactory ) +{ + bool bState; + + eFactory = SvtModuleOptions::EFactory::WRITER; + bState = ( sName == FACTORYNAME_WRITER ); + + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::WRITERWEB; + bState = ( sName == FACTORYNAME_WRITERWEB ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::WRITERGLOBAL; + bState = ( sName == FACTORYNAME_WRITERGLOBAL ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::CALC; + bState = ( sName == FACTORYNAME_CALC ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::DRAW; + bState = ( sName == FACTORYNAME_DRAW ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::IMPRESS; + bState = ( sName == FACTORYNAME_IMPRESS ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::MATH; + bState = ( sName == FACTORYNAME_MATH ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::CHART; + bState = ( sName == FACTORYNAME_CHART ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::DATABASE; + bState = ( sName == FACTORYNAME_DATABASE ); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::STARTMODULE; + bState = ( sName == FACTORYNAME_STARTMODULE); + } + // no else! + if( !bState ) + { + eFactory = SvtModuleOptions::EFactory::BASIC; + bState = ( sName == FACTORYNAME_BASIC); + } + + return bState; +} + +/*-************************************************************************************************************ + @short read factory configuration + @descr Give us a list of pure factory names (long names!) which can be used as + direct set node names... and we read her property values and fill internal list. + These method can be used by initial reading at ctor and later updating by "Notify()". + + @seealso ctor + @seealso method Notify() + + @param "lFactories" is the list of set node entries which should be read. + @onerror We do nothing. + @threadsafe no +*//*-*************************************************************************************************************/ +void SvtModuleOptions_Impl::impl_Read( const css::uno::Sequence< OUString >& lFactories ) +{ + // Expand every set node name in lFactories to full qualified paths to its properties + // and get right values from configuration. + const css::uno::Sequence< OUString > lProperties = impl_ExpandSetNames( lFactories ); + const css::uno::Sequence< css::uno::Any > lValues = GetProperties( lProperties ); + + // Safe impossible cases. + // We need values from ALL configuration keys. + // Follow assignment use order of values in relation to our list of key names! + OSL_ENSURE( !(lProperties.getLength()!=lValues.getLength()), "SvtModuleOptions_Impl::impl_Read()\nI miss some values of configuration keys!" ); + + // Algorithm: We step over all given factory names and classify it. These enum value can be used as direct index + // in our member list m_lFactories! VAriable nPropertyStart marks start position of every factory + // and her properties in expanded property/value list. The defines PROPERTHANDLE_xxx are used as offset values + // added to nPropertyStart. So we can address every property relative in these lists. + // If we found any valid values ... we reset all existing information for corresponding m_lFactories-entry and + // use a pointer to these struct in memory directly to set new values. + // But we set it only, if bInstalled is true. Otherwise all other values of a factory can be undeclared .. They + // shouldn't be used then. + // Attention: If a propertyset of a factory will be ignored we must step to next start position of next factory infos! + // see "nPropertyStart += PROPERTYCOUNT" ... + + sal_Int32 nPropertyStart = 0; + FactoryInfo* pInfo = nullptr; + SvtModuleOptions::EFactory eFactory; + + for( const OUString& sFactoryName : lFactories ) + { + if( ClassifyFactoryByName( sFactoryName, eFactory ) ) + { + OUString sTemp; + sal_Int32 nTemp = 0; + + pInfo = &(m_lFactories[eFactory]); + pInfo->free(); + + pInfo->initInstalled(); + pInfo->initFactory ( sFactoryName ); + + if (lValues[nPropertyStart+PROPERTYHANDLE_TEMPLATEFILE] >>= sTemp) + pInfo->initTemplateFile( sTemp ); + if (lValues[nPropertyStart+PROPERTYHANDLE_DEFAULTFILTER ] >>= sTemp) + pInfo->initDefaultFilter( sTemp ); + if (lValues[nPropertyStart+PROPERTYHANDLE_ICON] >>= nTemp) + pInfo->initIcon( nTemp ); + } + nPropertyStart += PROPERTYCOUNT; + } +} + +void SvtModuleOptions_Impl::MakeReadonlyStatesAvailable() +{ + if (m_bReadOnlyStatesWellKnown) + return; + + css::uno::Sequence< OUString > lFactories = GetNodeNames(OUString()); + std::transform(lFactories.begin(), lFactories.end(), lFactories.begin(), + [](const OUString& rFactory) -> OUString { + return rFactory + PATHSEPARATOR PROPERTYNAME_DEFAULTFILTER; + }); + + css::uno::Sequence< sal_Bool > lReadonlyStates = GetReadOnlyStates(lFactories); + sal_Int32 c = lFactories.getLength(); + for (sal_Int32 i=0; i<c; ++i) + { + OUString& rFactoryName = lFactories[i]; + SvtModuleOptions::EFactory eFactory; + + if (!ClassifyFactoryByName(rFactoryName, eFactory)) + continue; + + FactoryInfo& rInfo = m_lFactories[eFactory]; + rInfo.setDefaultFilterReadonly(lReadonlyStates[i]); + } + + m_bReadOnlyStatesWellKnown = true; +} + +namespace { + //global + std::weak_ptr<SvtModuleOptions_Impl> g_pModuleOptions; +} + +/*-************************************************************************************************************ + @short standard constructor and destructor + @descr This will initialize an instance with default values. We initialize/deinitialize our static data + container and create a static mutex, which is used for threadsafe code in further time of this object. + + @seealso method impl_GetOwnStaticMutex() + @threadsafe yes +*//*-*************************************************************************************************************/ +SvtModuleOptions::SvtModuleOptions() +{ + // Global access, must be guarded (multithreading!) + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + + m_pImpl = g_pModuleOptions.lock(); + if( !m_pImpl ) + { + m_pImpl = std::make_shared<SvtModuleOptions_Impl>(); + g_pModuleOptions = m_pImpl; + ItemHolder1::holdConfigItem(EItem::ModuleOptions); + } +} + +SvtModuleOptions::~SvtModuleOptions() +{ + // Global access, must be guarded (multithreading!) + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + + m_pImpl.reset(); +} + +/*-************************************************************************************************************ + @short access to configuration data + @descr This methods allow read/write access to configuration values. + They are threadsafe. All calls are forwarded to impl-data-container. See there for further information! + + @seealso method impl_GetOwnStaticMutex() + @threadsafe yes +*//*-*************************************************************************************************************/ +bool SvtModuleOptions::IsModuleInstalled( EModule eModule ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( eModule ); +} + +OUString SvtModuleOptions::GetFactoryName( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->GetFactoryName( eFactory ); +} + +OUString SvtModuleOptions::GetFactoryStandardTemplate( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->GetFactoryStandardTemplate( eFactory ); +} + +OUString SvtModuleOptions::GetFactoryEmptyDocumentURL( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return SvtModuleOptions_Impl::GetFactoryEmptyDocumentURL( eFactory ); +} + +OUString SvtModuleOptions::GetFactoryDefaultFilter( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->GetFactoryDefaultFilter( eFactory ); +} + +bool SvtModuleOptions::IsDefaultFilterReadonly( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + m_pImpl->MakeReadonlyStatesAvailable(); + return m_pImpl->IsDefaultFilterReadonly( eFactory ); +} + +sal_Int32 SvtModuleOptions::GetFactoryIcon( EFactory eFactory ) const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->GetFactoryIcon( eFactory ); +} + +bool SvtModuleOptions::ClassifyFactoryByName( const OUString& sName , + EFactory& eFactory ) +{ + // We don't need any mutex here ... because we don't use any member here! + return SvtModuleOptions_Impl::ClassifyFactoryByName( sName, eFactory ); +} + +void SvtModuleOptions::SetFactoryStandardTemplate( EFactory eFactory , + const OUString& sTemplate ) +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + m_pImpl->SetFactoryStandardTemplate( eFactory, sTemplate ); +} + +void SvtModuleOptions::SetFactoryDefaultFilter( EFactory eFactory, + const OUString& sFilter ) +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + m_pImpl->SetFactoryDefaultFilter( eFactory, sFilter ); +} + +bool SvtModuleOptions::IsMath() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::MATH ); +} + +bool SvtModuleOptions::IsChart() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::CHART ); +} + +bool SvtModuleOptions::IsCalc() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::CALC ); +} + +bool SvtModuleOptions::IsDraw() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::DRAW ); +} + +bool SvtModuleOptions::IsWriter() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::WRITER ); +} + +bool SvtModuleOptions::IsImpress() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::IMPRESS ); +} + +bool SvtModuleOptions::IsDataBase() const +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->IsModuleInstalled( EModule::DATABASE ); +} + +namespace +{ + class theModuleOptionsMutex : public rtl::Static<osl::Mutex, theModuleOptionsMutex> {}; +} +/*-**************************************************************************************************** + @short return a reference to a static mutex + @descr These class is threadsafe. + We create a static mutex only for one time and use it to protect our refcount and container + member! + @return A reference to a static mutex member. + @threadsafe yes +*//*-*****************************************************************************************************/ +::osl::Mutex& SvtModuleOptions::impl_GetOwnStaticMutex() +{ + return theModuleOptionsMutex::get(); +} + +OUString SvtModuleOptions::GetModuleName( EModule eModule ) const +{ + switch( eModule ) + { + case SvtModuleOptions::EModule::WRITER : { return "Writer"; } + case SvtModuleOptions::EModule::WEB : { return "Web"; } + case SvtModuleOptions::EModule::GLOBAL : { return "Global"; } + case SvtModuleOptions::EModule::CALC : { return "Calc"; } + case SvtModuleOptions::EModule::DRAW : { return "Draw"; } + case SvtModuleOptions::EModule::IMPRESS : { return "Impress"; } + case SvtModuleOptions::EModule::MATH : { return "Math"; } + case SvtModuleOptions::EModule::CHART : { return "Chart"; } + case SvtModuleOptions::EModule::BASIC : { return "Basic"; } + case SvtModuleOptions::EModule::DATABASE : { return "Database"; } + default: + OSL_FAIL( "unknown module" ); + break; + } + + return OUString(); +} + +SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByShortName(const OUString& sName) +{ + if ( sName == "swriter" ) + return EFactory::WRITER; + if (sName.equalsIgnoreAsciiCase("swriter/Web")) // sometimes they are registered for swriter/web :-( + return EFactory::WRITERWEB; + if (sName.equalsIgnoreAsciiCase("swriter/GlobalDocument")) // sometimes they are registered for swriter/globaldocument :-( + return EFactory::WRITERGLOBAL; + if ( sName == "scalc" ) + return EFactory::CALC; + if ( sName == "sdraw" ) + return EFactory::DRAW; + if ( sName == "simpress" ) + return EFactory::IMPRESS; + if ( sName == "schart" ) + return EFactory::CHART; + if ( sName == "smath" ) + return EFactory::MATH; + if ( sName == "sbasic" ) + return EFactory::BASIC; + if ( sName == "sdatabase" ) + return EFactory::DATABASE; + + return EFactory::UNKNOWN_FACTORY; +} + +SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByServiceName(const OUString& sName) +{ + if (sName == FACTORYNAME_WRITERGLOBAL) + return EFactory::WRITERGLOBAL; + if (sName == FACTORYNAME_WRITERWEB) + return EFactory::WRITERWEB; + if (sName == FACTORYNAME_WRITER) + return EFactory::WRITER; + if (sName == FACTORYNAME_CALC) + return EFactory::CALC; + if (sName == FACTORYNAME_DRAW) + return EFactory::DRAW; + if (sName == FACTORYNAME_IMPRESS) + return EFactory::IMPRESS; + if (sName == FACTORYNAME_MATH) + return EFactory::MATH; + if (sName == FACTORYNAME_CHART) + return EFactory::CHART; + if (sName == FACTORYNAME_DATABASE) + return EFactory::DATABASE; + if (sName == FACTORYNAME_STARTMODULE) + return EFactory::STARTMODULE; + if (sName == FACTORYNAME_BASIC) + return EFactory::BASIC; + + return EFactory::UNKNOWN_FACTORY; +} + +SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByURL(const OUString& sURL , + const css::uno::Sequence< css::beans::PropertyValue >& lMediaDescriptor) +{ + css::uno::Reference< css::uno::XComponentContext > xContext = ::comphelper::getProcessComponentContext(); + + css::uno::Reference< css::container::XNameAccess > xFilterCfg; + css::uno::Reference< css::container::XNameAccess > xTypeCfg; + try + { + xFilterCfg.set( + xContext->getServiceManager()->createInstanceWithContext("com.sun.star.document.FilterFactory", xContext), css::uno::UNO_QUERY); + xTypeCfg.set( + xContext->getServiceManager()->createInstanceWithContext("com.sun.star.document.TypeDetection", xContext), css::uno::UNO_QUERY); + } + catch(const css::uno::RuntimeException&) + { throw; } + catch(const css::uno::Exception&) + { return EFactory::UNKNOWN_FACTORY; } + + ::comphelper::SequenceAsHashMap stlDesc(lMediaDescriptor); + + // is there already a filter inside the descriptor? + OUString sFilterName = stlDesc.getUnpackedValueOrDefault("FilterName", OUString()); + if (!sFilterName.isEmpty()) + { + try + { + ::comphelper::SequenceAsHashMap stlFilterProps (xFilterCfg->getByName(sFilterName)); + OUString sDocumentService = stlFilterProps.getUnpackedValueOrDefault("DocumentService", OUString()); + SvtModuleOptions::EFactory eApp = SvtModuleOptions::ClassifyFactoryByServiceName(sDocumentService); + + if (eApp != EFactory::UNKNOWN_FACTORY) + return eApp; + } + catch(const css::uno::RuntimeException&) + { throw; } + catch(const css::uno::Exception&) + { /* do nothing here ... may the following code can help!*/ } + } + + // is there already a type inside the descriptor? + OUString sTypeName = stlDesc.getUnpackedValueOrDefault("TypeName", OUString()); + if (sTypeName.isEmpty()) + { + // no :-( + // start flat detection of URL + css::uno::Reference< css::document::XTypeDetection > xDetect(xTypeCfg, css::uno::UNO_QUERY); + sTypeName = xDetect->queryTypeByURL(sURL); + } + + if (sTypeName.isEmpty()) + return EFactory::UNKNOWN_FACTORY; + + // yes - there is a type info + // Try to find the preferred filter. + try + { + ::comphelper::SequenceAsHashMap stlTypeProps (xTypeCfg->getByName(sTypeName)); + OUString sPreferredFilter = stlTypeProps.getUnpackedValueOrDefault("PreferredFilter", OUString()); + ::comphelper::SequenceAsHashMap stlFilterProps (xFilterCfg->getByName(sPreferredFilter)); + OUString sDocumentService = stlFilterProps.getUnpackedValueOrDefault("DocumentService", OUString()); + SvtModuleOptions::EFactory eApp = SvtModuleOptions::ClassifyFactoryByServiceName(sDocumentService); + + if (eApp != EFactory::UNKNOWN_FACTORY) + return eApp; + } + catch(const css::uno::RuntimeException&) + { throw; } + catch(const css::uno::Exception&) + { /* do nothing here ... may the following code can help!*/ } + + // no filter/no type/no detection result => no fun :-) + return EFactory::UNKNOWN_FACTORY; +} + +SvtModuleOptions::EFactory SvtModuleOptions::ClassifyFactoryByModel(const css::uno::Reference< css::frame::XModel >& xModel) +{ + css::uno::Reference< css::lang::XServiceInfo > xInfo(xModel, css::uno::UNO_QUERY); + if (!xInfo.is()) + return EFactory::UNKNOWN_FACTORY; + + const css::uno::Sequence< OUString > lServices = xInfo->getSupportedServiceNames(); + + for (const OUString& rService : lServices) + { + SvtModuleOptions::EFactory eApp = SvtModuleOptions::ClassifyFactoryByServiceName(rService); + if (eApp != EFactory::UNKNOWN_FACTORY) + return eApp; + } + + return EFactory::UNKNOWN_FACTORY; +} + +css::uno::Sequence < OUString > SvtModuleOptions::GetAllServiceNames() +{ + ::osl::MutexGuard aGuard( impl_GetOwnStaticMutex() ); + return m_pImpl->GetAllServiceNames(); +} + +OUString SvtModuleOptions::GetDefaultModuleName() const +{ + OUString aModule; + if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::WRITER)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITER); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::CALC)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::CALC); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::IMPRESS)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::IMPRESS); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::DATABASE)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::DATABASE); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::DRAW)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::DRAW); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::WEB)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITERWEB); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::GLOBAL)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::WRITERGLOBAL); + else if (m_pImpl->IsModuleInstalled(SvtModuleOptions::EModule::MATH)) + aModule = GetFactoryShortName(SvtModuleOptions::EFactory::MATH); + return aModule; +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |