Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 383 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
new file mode 100644
index 000000000..8f52206cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/edac/socfpga-eccmgr.txt
@@ -0,0 +1,383 @@
+Altera SoCFPGA ECC Manager
+This driver uses the EDAC framework to implement the SOCFPGA ECC Manager.
+The ECC Manager counts and corrects single bit errors and counts/handles
+double bit errors which are uncorrectable.
+
+Cyclone5 and Arria5 ECC Manager
+Required Properties:
+- compatible : Should be "altr,socfpga-ecc-manager"
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+On Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-ocram-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- iram : phandle to On-Chip RAM definition.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt. Note the rising edge type.
+
+Example:
+
+	eccmgr: eccmgr@ffd08140 {
+		compatible = "altr,socfpga-ecc-manager";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		l2-ecc@ffd08140 {
+			compatible = "altr,socfpga-l2-ecc";
+			reg = <0xffd08140 0x4>;
+			interrupts = <0 36 1>, <0 37 1>;
+		};
+
+		ocram-ecc@ffd08144 {
+			compatible = "altr,socfpga-ocram-ecc";
+			reg = <0xffd08144 0x4>;
+			iram = <&ocram>;
+			interrupts = <0 178 1>, <0 179 1>;
+		};
+	};
+
+Arria10 SoCFPGA ECC Manager
+The Arria10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register instead of individual IRQs like the Cyclone5
+and Arria5. Therefore the device tree is different as well.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ecc-manager"
+- altr,sysgr-syscon : phandle to Arria10 System Manager Block
+	containing the ECC manager registers.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+L2 Cache ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-l2-ecc"
+- reg : Address and size for ECC error interrupt clear registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible : Should be "altr,socfpga-a10-ocram-ecc"
+- reg        : Address and size for ECC block registers.
+- interrupts : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+QSPI FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-qspi-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent QSPI node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt, then double bit error
+	interrupt, in this order for port A, and then single bit error interrupt,
+	then double bit error interrupt in this order for port B.
+
+Example:
+
+	eccmgr: eccmgr@ffd06000 {
+		compatible = "altr,socfpga-a10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		l2-ecc@ffd06010 {
+			compatible = "altr,socfpga-a10-l2-ecc";
+			reg = <0xffd06010 0x4>;
+			interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+				     <32 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8c3000 {
+			compatible = "altr,socfpga-a10-ocram-ecc";
+			reg = <0xff8c3000 0x90>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+				     <33 IRQ_TYPE_LEVEL_HIGH> ;
+		};
+
+		emac0-rx-ecc@ff8c0800 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0800 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>,
+				     <36 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0c00 {
+			compatible = "altr,socfpga-eth-mac-ecc";
+			reg = <0xff8c0c00 0x400>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>,
+				     <37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-buf-ecc@ff8c2000 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2000 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>,
+				     <43 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c2400 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2400 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>,
+				     <45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c2800 {
+			compatible = "altr,socfpga-nand-ecc";
+			reg = <0xff8c2800 0x400>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
+				     <44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c8000 {
+			compatible = "altr,socfpga-dma-ecc";
+			reg = <0xff8c8000 0x400>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+				     <42 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c8800 {
+			compatible = "altr,socfpga-usb-ecc";
+			reg = <0xff8c8800 0x400>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+				     <34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		qspi-ecc@ff8c8400 {
+			compatible = "altr,socfpga-qspi-ecc";
+			reg = <0xff8c8400 0x400>;
+			altr,ecc-parent = <&qspi>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c2c00 {
+			compatible = "altr,socfpga-sdmmc-ecc";
+			reg = <0xff8c2c00 0x400>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+				     <47 IRQ_TYPE_LEVEL_HIGH>,
+				     <16 IRQ_TYPE_LEVEL_HIGH>,
+				     <48 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+Stratix10 SoCFPGA ECC Manager (ARM64)
+The Stratix10 SoC ECC Manager handles the IRQs for each peripheral
+in a shared register similar to the Arria10. However, Stratix10 ECC
+requires access to registers that can only be read from Secure Monitor
+with SMC calls. Therefore the device tree is slightly different. Note
+that only 1 interrupt is sent in Stratix10 because the double bit errors
+are treated as SErrors in ARM64 instead of IRQs in ARM32.
+
+Required Properties:
+- compatible : Should be "altr,socfpga-s10-ecc-manager"
+- altr,sysgr-syscon : phandle to Stratix10 System Manager Block
+	              containing the ECC manager registers.
+- interrupts : Should be single bit error interrupt.
+- interrupt-controller : boolean indicator that ECC Manager is an interrupt controller
+- #interrupt-cells : must be set to 2.
+- #address-cells: must be 1
+- #size-cells: must be 1
+- ranges : standard definition, should translate from local addresses
+
+Subcomponents:
+
+SDRAM ECC
+Required Properties:
+- compatible : Should be "altr,sdram-edac-s10"
+- interrupts : Should be single bit error interrupt.
+
+On-Chip RAM ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-ocram-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent OCRAM node.
+- interrupts      : Should be single bit error interrupt.
+
+Ethernet FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-eth-mac-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent Ethernet node.
+- interrupts      : Should be single bit error interrupt.
+
+NAND FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-nand-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent NAND node.
+- interrupts      : Should be single bit error interrupt.
+
+DMA FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-dma-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent DMA node.
+- interrupts      : Should be single bit error interrupt.
+
+USB FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-usb-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent USB node.
+- interrupts      : Should be single bit error interrupt.
+
+SDMMC FIFO ECC
+Required Properties:
+- compatible      : Should be "altr,socfpga-s10-sdmmc-ecc"
+- reg             : Address and size for ECC block registers.
+- altr,ecc-parent : phandle to parent SD/MMC node.
+- interrupts      : Should be single bit error interrupt for port A
+		    and then single bit error interrupt for port B.
+
+Example:
+
+	eccmgr {
+		compatible = "altr,socfpga-s10-ecc-manager";
+		altr,sysmgr-syscon = <&sysmgr>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupts = <0 15 4>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ranges;
+
+		sdramedac {
+			compatible = "altr,sdram-edac-s10";
+			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ocram-ecc@ff8cc000 {
+			compatible = "altr,socfpga-s10-ocram-ecc";
+			reg = <ff8cc000 0x100>;
+			altr,ecc-parent = <&ocram>;
+			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-rx-ecc@ff8c0000 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0000 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		emac0-tx-ecc@ff8c0400 {
+			compatible = "altr,socfpga-s10-eth-mac-ecc";
+			reg = <0xff8c0400 0x100>;
+			altr,ecc-parent = <&gmac0>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>'
+		};
+
+		nand-buf-ecc@ff8c8000 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8000 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-rd-ecc@ff8c8400 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8400 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		nand-wr-ecc@ff8c8800 {
+			compatible = "altr,socfpga-s10-nand-ecc";
+			reg = <0xff8c8800 0x100>;
+			altr,ecc-parent = <&nand>;
+			interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma-ecc@ff8c9000 {
+			compatible = "altr,socfpga-s10-dma-ecc";
+			reg = <0xff8c9000 0x100>;
+			altr,ecc-parent = <&pdma>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb0-ecc@ff8c4000 {
+			compatible = "altr,socfpga-s10-usb-ecc";
+			reg = <0xff8c4000 0x100>;
+			altr,ecc-parent = <&usb0>;
+			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sdmmc-ecc@ff8c8c00 {
+			compatible = "altr,socfpga-s10-sdmmc-ecc";
+			reg = <0xff8c8c00 0x100>;
+			altr,ecc-parent = <&mmc>;
+			interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
+				     <15 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};